C-SDP205H02B Specification

Transcription

1 Aislu Electric C.,Ltd. 3412# Dehua Building Xiyu Rd. Hefei, Anhui, China. Tel: Fax: Date: Jan Ref#: ASP040127X3033 Attn: Subject:: C-SDP205H02B Specificatin sheet C-SDP205H02B Specificatin Translatins cpy nly, all data subject t Sany fficial specificatin. 1. General Specificatin Item Unit Cntent/Specificatin Mdel Number - C- SDP205H02B Type - DC Inverter Scrll Cmpressr Applicatin - HBP Eva. Temperature Range C -15 ~ +12 Cmpressr Cling Type - Air Cl Pwer Surce Type - DC Inverter Vltage Supply Type V Vectr Cntrl Wrking Range Rps 30 ~ 90 Inverter Input Pwer V V, 3phase, 50/60Hz Weight(Include il) Kg 36 Refrigerant - R410A Oil Type - FV68S Oil Feed ml 2000 Displacement cm 3 /rev 42.3 Type - 3phase DC Inverter sync. mtr Ple - 4 Insulatin Level - E Rated speed(*1) min -1 synchr-speed Mtr Starting current(*2) A - Cil resistance(25 C) Ω U-V U-W V-W Suctin pipe(o.d) mm(in) 22.2(0.875) Cnnectin part(*3) Discharge pipe(o.d) mm(in) 12.7(0.5) Surface - Black Remark: *1 : Rated running speed *2 : Starting current measure by COLD methd *3 : Cnnectin part pipe O.D -Page 1-

2 Vltage-Frequency: vectr characteristic curve The vectr frequency cntrl vltage is based n cmmn mtr speed and trque regulatin, and the state will be used in high-speed field weakening cntrl, the change is mre cmplex, using a vltage - speed curve r vltage - trque curve is difficult t articulate, s nly ARI n the relatinship between speed and vltage cnditins t make the vltage - speed curve. ARI cnditin Refrigerant - R410A Cndensing temp. Eva.temp. Suctin superheat temp. Subcling C 54.4 C 7.2 C 11.1 C 8.3 Cmpressr cl cnditin - Nature air Vltage(V) Rev. Speed(rps) Trque(N.m) - -Page 2-

3 2. Characteristic Guarantee 2.1 Perfrmance Cmpressr input pwer Hz 60 Remark (Inverter utput pwer) V 235 W /- 7% Cling capacity Btu/h /- 7% Input Pwer(nt include Inverter) W /- 7% Current(Nt include inverter) A /- 7% Test Cnditin Refrigerant - R410A / Cndensing temp. Eva.temp. Suctin.Temp. Expansin valve inlet temp. Ambient.Temp. C 54.4 / C 7.2 / C 18.3 C 46.1 C Vibratin and Nise Vibratin um 65 Max. Nise db(a) 66Max. Remark: 1. Running cnditin same as Micrphne psitin: Cmpressr crsswise 1meter 3. Nise value is average value 2.3 Other Characteristic Item Unit Guarantee Value Design pressure Lw pressure part Mpa(G) - High pressure part Mpa(G) Insulatin Resistance MΩ >100 (nt include refrigerant) Withstand vltage V 2300(1sec) Residual misture mg <300 Remark: Insulatin resistance use DC500V insulatin resistance meter. 3. Accessries Subject t supplying f Sany Cmpressr -Page 3-

4 4. Cmpressr prtectin device 4.1 Necessary prtectin device (Des nt include in cmpressr ) Prtectin Device Item Spec. Crankcase Heating Tape Rated pwer 35Watts Discharge temperature prtectr Installatin psitin OFF-temperature Restre-temperature The cmpressr cver blind cpper tube 115+/- 5 C 95+/- 10 C Hi-pressure switch Setup value <4.15MPa(G) L-pressure switch Setup value >0.05MPa(G) 4.2 Prtectin device installatin and refrigerant charge psitin Liquid refrigerant charge Gas refrigerant charge Crankcase Heating Tape -Page 4-

5 5. Wrking range Suctin superheat temperature: 11.1K Refrigerant: R410A. -Page 5-

6 6. Cmpressr perfrmance chart -Page 6-

7 -Page 7-

8 -Page 8-

9 7. Standard recmmended practice (Standard). Use Limitatin(Limitatin). Fr crrect use this vertical scrll cmpressr, list belw standard recmmended practice and use limitatin: Standard recmmended practice: as nrmal use cnditin, refer t Japan JIS B8616. Use limitatin: suitable fr under the cnditin f transitin N. Item Use value (range) Remark 1 Refrigerant R410A 2 Evapratin Temperature -15 ~ + 12 C Cmpressr suctin pressure 0.38 ~ 1.05MPa (G) 3 Cndensing temp. +30 ~+60 C Cmpressr discharge pressure 1.78~3.75MPa(G) 4 Cmpressin rati 2 ~ 6 (except starting, defrsting..etc) 5 Mtr Cil temperature Under(<) 120 C 6 Cmpressr bdy bttm temp erature Under(<) 105 C Cndensing temperature(>) + 0.5K 7 Discharge temperature Under(<) 115 C Psitin f cmpressr dischar ge pipe 10cm 8 Suctin temperature Suctin verheat > 5K Suctin pipe temperature f p sitin f cmpressr inlet sid e less than 30cm 9 Inverter input vltage (n runni ng) Rated vltage +/- 20% Inverter utput vltage n run ning 10 Inverter input vltage (n starti ng) 3phase : mre than 85% f rated vltage Vltage f inverter f starting current rise and vltage drp 11 Start-stp cycle Running time: ensure there is enugh time fril return ba ck t indicated il level. Stp time: Ensure high-lw pressure balance 1 cycle: > 8 minutes Stp: > 3minutes Run: >5minutes 12 Refrigerant charge Suggested il/refrigerant weight rati>0.35 Oil specific gravity Start-stp frequency 200,000 cycles 14 Oil level inside f cmpressr Nt less cmpressr under end face f lwer bearing 15 Unusual pressure rise/drp Pressure rise: <4.15MPa(G) Pressure drp: >0.15MPa(G) High-pressure switch set value Lw-pressure switch set value 16 Misture Refrigeratin circuit misture <200ppm Dryer (ref. Sany D-S type) 17 Nn-cndensable gas nn-cndensable gas in refrigeratin circuit <1% (vlume r ati), residual xygen <0.1% (vlume rati) Vacuum 24hurs abslute press ure <1.01kPa 18 Angle f inclinatin 5degree max. -Page 9-

10 -Page 10-

11 -Page 11-

12 -Page 12-