MAQUINARIA IGSA POWER GENERATION SYSTEMS
|
|
- Reynard Baker
- 5 years ago
- Views:
Transcription
1 MAQUINARIA IGSA POWER GENERATION SYSTEMS MODEL: GSJD10150M DIESEL ENGINE: JOHN DEERE MODEL: 6068HF150, TIER 1 CAPACITY: 150 kw; 1800 RPM PRIME hp (kw) ( ) RATINGS RANGE Nte: Grss pwer guaranteed within + r 5% ISO 3046 cnditins: 77 F (25 C) Air inlet temperature in.hg(99kpa) Barmeter 104 F (40 C) fuel inlet temperature fuel specific 60 F (15.5 C) STANDBY hp (kw) ( ) STANDARD FEATURES Cmplete system designed and built at ISO9001 certified facility Factry tested t design specificatins at full lad cnditins. Fully engineered with a range f ptins and accessries. 1 IGSA Genset s are cmpsed f 6 cylinders and fur strkes diesel engine fr industrial statinary applicatins. Thse equipments are fully factry tested using a resistive lad. (1) Hur ramp100% lad test. 2 The cntrls and accessries are selected t wrk tgether t achieve the maximum peratinal perfrmance and security. 3 Exhaust gases silencer, and a sectin f flexible tube fr cnnectin purpses. 4 Engine JOHN DEERE, 6068HF150, TIER1. 5 Marathn r Stamfrd Alternatr. 6 Radiatr. 7 Cntrl MEC 310 (panel USC300). 8 Base f structural steel. General Features IGSA GENSET f, 150 kw t 208V, 380V, 440V, 480V, 3 Phase, 4 Wire, 60 Hertz, is cmpsed by an internal engine fur strkes cupling with the alternatr, cntrls and accessries ttally assembled and tested in factry. The cntrls and accessries f the Genset are selected t prvide the maximum in efficiency and Security. The generatr set its cmpnents are tested factry-built, and prductin-tested. The genset engine is certified by the Envirnmental Prtectin Agency (EPA) t cnfrm t Tier 1 nnrad emissins regulatins. 1-7
2 ENGINE SPECIFICATION DATA MODEL 6068HF150 weight 569 kg (1250Lb) General Data Electrical System Mdel 6068HF150 Recmmended Battery Capacity (CCA) Number f Cylinders 6 12 Vlt System--amp 800 Bre and Strke--in.(mm) 4.19 x 5 (106 x 127) 24 Vlt System--amp 570 Displacement--in.³ (L) 414 (6.8) Maximum Allwable Starting Circuit Resistane Cmpressin Rati 17.0 : 1 12 Vlt System--Ohm Valves per Cylinder--Intake/Exhaust 1 / 1 24 Vlt System--Ohm Firing Order Starter Rlling Current Vlt System Cmbustin System Direct Injectin At 32 F (0 C) -- amp 920 Engine Type In-line, 4-Cycle At -22 F (-30 C) -- amp 1300 Aspiratin Turbcharged Starter Rlling Current Vlt System Engine Crankcase Vent System Open At 32 F (0 C) -- amp 600 Maximum Crankcase Pressure--in.H2O (kpa) 2 (0.5) At -22 F (-30 C) -- amp 700 Physical Data Lubricatin System Prime Standby Length--in.(mm) 44.9 (1141) Oil Pressure at Rated Speed--psi (kpa) 50 (345) 50 (345) Width--in.(mm) 24.5 (623) Oil Pressure at Lw Idle--psi (kpa) 15 (105) 15 (105) Height--in.(mm) 39.7 (109) In Pan Oil Temperature-- F ( C) 250 (121) 252 (122) Weight, dry--lb (kg) 1250 (569) Oil Pan Capacty, High--qt (L) 25 (23.9) 25 (23.9) (Includes SAE 4 flywheel husing, RE28119 flywheel, Oil Pan Capacty, Lw--qt (L) 24 (22.7) 24 (22.7) starter and electrics.) Ttal Engine Oil Capacity Center f Gravity Lcatin With Filters--qt (L) 26 (24.6) 26 (24.6) Frm Rear Face f Blck (X-axis)--in.(mm) 17.2 (438) Engie Angularity Limits Right f Crankshaft (Y-axis)--in.(mm) 0.05 (1) (Cntinuus) Any Directin--degrees Abve Crankshaft (Z-axis)--in.(mm) 6.2 (157) Exhaust System Prime Standby Max. Allw. Static Bending Mment at Rear Exhaust Flw ft³/min (m³/min) 1112(31.5) 1201(34) Face f Flywhl Hsg w/ 5-G Lad--lb-ft (N m) 600 (814) Exhaust Temperature-- F ( C) 1024 (551) 1056 (569) Thrust Bearing Lad Limit (Frward) Max. Allw. Back Press.--in.H2O (kpa) 30 (7.5) 30 (7.5) Cntinuus--lb (N) 500 (2224) Recm d Exhaust Pipe Dia--in.(mm) 4 (101.6) 4 (101.6) Intermittent--lb (N) 900 (4003) Cling System Prime Standby Perfrmance Data Prime Standby Engine Heat Reject.--BTU/min (kw) 4040 (71) 4438 (78) Rated Pwer--hp (kw) 225 (168) 251 (187) Clant Flw--gal/min (L/min) 46 (174) 46 (174) Rated Speed--rpm Thermstat Start t Open-- F ( C) 180 (82) 180 (82) Lw Idle Speed--rpm Thermstat Fully Open-- F ( C) 202 (94) 202 (94) BMEP--psi (kpa) 239 (1650) 266 (1837) Maximum Water Pump Frictin Pwer Inlet Restrictin--in.H2O (kpa) 27 (7) 27 (7) At Rated Speed--hp (kw) 23 (17) 23 (17) Engine Clant Capacity--qt (L) 12 (11.3) 12 (11.3) Altitude Capability--ft (m) 7500 (2300) 5000 (1500) Recm d Pressure Cap--psi (kpa) 10 (69) 10 (169) Rati--Air : Fuel. 22.6:1 21.7:1 Maximum Tp Tank Temp-- F ( C) 221 (105) 221 (1105) 1 m N/A N/A Min. Clant Fill Rate--gal/min (L/min) 3 (11) 3 (11) Air System Prime Standby Min. Air-t-Bil Temperature-- F ( C) 117 (47) 117 (47) Maximum Allwable Temp Rise--Ambient Air t Fuel System Prime Standby Engine Inlet-- F ( C) 15 (8) 15 (8) Fuel Injectin Pump Stanadyne Stanadyne Maximum Air Intake Restrictin Gvernr Regulatin 5% 5% Dirty Air Cleaner--in.H2O (kpa) 25 (6.25) 25 (6.25) Gvernr Type Mechanical Mechanical Clean Air Cleaner--in.H2O (kpa) 12 (3) 12 (3) Fuel Cnsumptin--lb/hr (kg/hr) 78.3 (35.6) 86.5 (39.3) Engine Air Flw ft³/min (m³/min) 413 (11.7) 441 (12.5) Ttal Fuel Flw--lb/hr (kg/hr) 212 (96) 212 (96) Intake Manifld Pressure--psi (kpa) 20.3 (140) 22.6 (156) Maximum Fuel Transfer Pump Suctin ft (m) fuel 3 (0.9) 3 (0.9) Rec d. Intake Pipe Dia--in.(mm) 3 (76.2) 3 (76.2) Fuel Filter Micrn 98 % Efficiency 8 8 Cmpress Discharge Temp F ( C) 307 (153) 334 (168) Fuel Cnsumptin -- lb/hr (kg/hr) Prime Standby Max. press. Drp thrugh 25 % Pwer 21.1 (9.6) 23.1 (10.5) Charge Air Cler 52 (13) 52 (13) 50 % Pwer 39.4 (17.9) 44.0 (20.0) Max. Temp. Out f Charge Air 75 % Pwer 59.8 (27.2) 66.7 (30.3) 77 F (25 C) Ambient Air F ( C) 140 (60) 140 (60) 100 % Pwer 78.3 (35.6) 86.5 (39.3) 2-7
3 MARATHON ELECTRIC ALTERNATOR MODEL 431PSL6202 Weight 553 kg (1220Lb) Kilwatt ratings at 1800 RPM 60 Hertz 12 Leads standard 3 phase kw (kva) 3 Phase 0.8 Pwer Factr Dripprf r Open Enclusure Class B Class F Class H Vltage 80º C, 90º C, 95º C, 105º C 105º C, 130º C, 125º C 125º C, 150º C, 176 F (1) 194 F (1) 203 F (1) British 221 F (1) 266 F (1) British 257 F (1) 302 F (1) Cntinuus Llyds ABS Standard Cntinuus Standby Standard Cntinuus Standby 480/ (156) 131 (164) 135 (169) 142 (178) 142 (178) 155 (194) 145 (181) 151 (189) 160 (200) 230/ (156) 132 (165) 136 (170) 143 (179) 143 (179) 155 (194) 145 (181) 152 (190) 160 (200) 220/ (156) 132 (165) 136 (170) 143 (179) 143 (179) 153 (191) 145 (181) 151 (189) 160 (200) 208/ (156) 130 (163) 133 (166) 140 (175) 140 (175) 151 (189) 141 (176) 147 (184) 155 (194) 190/ (144) 120 (150) 123 (154) 130 (163) 130 (163) 140 (175) 132 (165) 135 (169) 145 (181) (1)Rise by resistance methd, Mil-Std-705, Methd 680.1b. Rating per BS Submittal Data: 480 Vlts, kw, 156 kva, 0.8 P.F., 1800 RPM, 60 Hz, 3 Phase Mil-Std-705C Mil-Std-705C Methd Descriptin Value Methd Descriptin Value 301.1b Insulatin Resistance > 1.5 Meg 505.3b Overspeed 2250 RPM 302.1a High Ptential Test 507.1c Phase Sequence CCW-ODE ABC Main Statr 2000 Vlts 508.1c Vltage Balance L-L OR L-N 0.20% Main Rtr 1500 Vlts 601.4a L-L Harmnic Maximum - Ttal 5% Exciter Statr 1500 Vlts (Distrtin Factr) Exciter Rtr 1500 Vlts 601.4a L-L Harmnic Maximum - Single 3.0% 401.1a Statr Resistance, Line t Line 601.1c Deviatin Factr 5.0% High Wye Cnnectin Ohms -- TIF (1960 Weightings) <50 Rtr Resistance Ohms 625.1c Mechanical Strength (High Wye Exciter Statr 18.5 Ohms Cnnectin, Sustained 3 Phase) Exciter Rtr Ohms Shrt Circuit Current) <300% 410.1a N Lad Exciter Field Amps 652.1a Shaft Current <0.1 ma at 240/480 Vlts Line t Line 0.6 A DC 652.1a Main Statr Capacitance t grund mdf 420.1a Shrt Circuit Rati a Xd Synchrnus Reactance 3.08 pu Additinal Prttype Mil-Std Methds 422.1a X2 Negative Sequence pu are Available n Request a X0 Zer Sequence Reactance pu -- Generatr Frame a X'd Transient Reactance pu -- Type Ext. Vltage Regulated, Brushless 426.1a X''d Subtransient Reactance pu -- Insulatin Class H 427.1a T'd Transient Shrt Circuit -- Cupling - Single Bearing Flexible Time Cnstant sec. -- Amrtisseur Windings Full 428.1a T''d Subtransient Shrt Circuit -- Exciter Rtating Time Cnstant sec. -- Vltage Regulatr SE350*** 430.1a T'd Transient Open Circuit -- Vltage Regulatin 1%*** Time Cnstant 1.34 sec. -- Cling Air Vlume 1280 CFM 432.1a Ta Shrt Circuit Time -- Sensing 1 Phase*** Cnstant f Armature Winding sec. * (3) Excitatin supprt system r PMG required t sustain shrt circuit currents. * Vltage refers t wye (star) cnnectin, unless therwise specified. ** Nt supplied as standard equipment. *** DVR 2000 vltage regulatr supplied with PMG ptin. DVR 2000 vltage regulatin ¼% I r 3 Phase sensing 3-7
4 STAMFORD ELECTRIC ALTERNATOR MODEL UCI274F weight 530 kg ( Lb) CONTROL SYSTEM SEPARATELY EXCITED BY P.M.G. A.V.R. MX321 MX341 VOLTAGE REGULATION (+/- 0.5%) (+/- 1.0%) WITH ENGINE GOVERNING SUSTAINED SHORT CIRCUIT REFERENT TO SHOT CIRCUIT DECREMENT CURRENT INSULATION SYSTEM CLASS H PROTECTION IP23 RATED POWER FACTOR 0.8 STATOR WINDING DOUBLE LAYER CONCENTRIC WINDING PITCH TWO THIRDS WINDING LEADS 12 STATOR WDG. RESISTANCE Ohms PER PHASE AT 22 C SERIES STAR CONNECTED ROTOR WDG. RESISTANCE 1.52 Ohms at 22 C (71.6 F) R.F.I. SUPPRESSION BS EN & BS EN ,VDE 0875G, VDE 0875N. refer t factry fr thers WAVEFORM DISTORTION NO LOAD < 1.5% NON-DISTORTING BALANCED LINEAR LOAD < 5.0% MAXIMUM OVERSPEED 2250 Rev/Min BEARING DRIVE END BALL RS. (ISO) BEARING NON-DRIVE END BALL RS. (ISO) 1 BEARING 2 BEARING WEIGHT COMP. GENERATOR 530 kg lb 545 kg lb WEIGHT WOUND STATOR 200 kg lb 200 kg lb WEIGHT WOUND ROTOR Kg lb kg lb WR² INERTIA kgm lbft kgm lbft2 SHIPPING WEIGHTS in a crate 563 kg lb 577 kg lb PACKING CRATE SIZE 105 x 67 x 103 (cm) 41.3x26.4x40.6(in) 123x 67x 103 (cm) 48.4x26.4x40.6(in 50 Hz 60 Hz TELEPHONE INTERFERENCE THF<2% TIF<50 COOLING AIR m³/sec 1090 cfm m³/sec 1308 cfm VOLTAGE SERIES STAR 380/ / / / / / / /277 VOLTAGE PARALLEL STAR 190/ / / / / / / /138 VOLTAGE SERIES DELTA 220/ / / / / / / /138 kva BASE RATING FOR RECTANCE VALUES N/A Xd DIR. AXIS SYNCHRONOUS X'd DIR. AXIS TRANSIENT X''d DIR. AXIS SUBTRANSIENT Xq QUAD. AXIS REACTANCE X''q QUAD. AXIS SUBTRANSIENT XL LEAKAGE REACTANCE X2 NEGATIVE SEQUENCE X0 ZERO SEQUENCE REACTANCES ARE SATURATED VALUES ARE PER UNIT AT RATING AND VOLTAGE INDICATED T'd TRANSIENT TIME CONST s T''d SUB-TRANSTIME CONST s T'd O.C. FIELD TIME CONST. 0.9 s Ta ARMATURE TIME CONST s SHORT CIRCUIT RATIO 1/Xd RATINGS: All three-phase units are rated at 0.8 pwer factr. All single-phase units are rated at 1.0 pwer factr. Standby Ratings: Standby ratings apply t installatins served by a reliable utility surce. The standby rating is applicable t varying lads fr the duratin f a pwer utage. There is n verlad capability fr this rating. Ratings are in accrdance with ISO-3046/1, BS5514, AS2789, and DIN Prime Pwer Ratings: Prime pwer ratings apply t installatins where utility pwer is unavailable r unreliable. At varying lad, the number f generatr set perating hurs is unlimited. A 10% verlad capacity is available fr a 12 hur perid. Ratings are in accrdance with ISO- 8528/1, verlad pwer in accrdance with ISO-3046/1, BS 5514, AS 2789, and DIN Fr limited running time and base lad ratings, cnsult the factry. The generatr set manufacturer reserves the right t change the design r specificatins withut ntice and withut any bligatin r liability whatsever. GENERAL GUIDELINES FOR DERATION: Altitude: Derate 1.3% per 100 m (328 ft.) elevatin abve 1500 m (5000 ft.). Temperature: Derate 1.0% per 10 C (18 F) temperature abve 25 C (77 F). 4-7
5 CONTROLLER FOR GENSET: CONTROL MEC 310 PANEL USC300 The Generatr Cntrller MEC 310 is a micrprcessr-based cntrl unit cntaining all necessary functins fr prtectin and cntrl f a pwer generatr. Besides the cntrl and prtectin f the diesel engine it cntains a full 3-phase AC vltage and current measuring circuit. The unit is equipped with an LCD display presenting all values and alarms. AC Prtective Relaying: 27/59 Under/Over Vltage 32 Reverse Pwer 51 Time Overcurrent 81 O/U Under/Over Frequency Digital gauge display: Oil Pressure (sender required by thers) Clant Temperature (sender required by thers) Fuel Level (sender required by thers) Hurmeter Tachmeter USC 300C Unit Munt Cntrl Panel, Black Nema 1 enclsure c/w rubber munts MEC 310 Micrprcessr Based Engine Generatr Cntrller Graphic Display 128 X 64 pixels (STN) Super Twisted Nematic Digital AC Metering: 3-Phase Vlts (Phase t Phase and Phase t Neutral), 3-Phase Amps Frequency kw, kvar, KVA, pf, kwhr 5 digital inputs fr alarms / shutdwns Dedicated Output Cntacts - Engine Crank; Run (30 VDC / 6 Amps) Three Prgrammable Output Cntacts (30 VDC / 1 Amps) Event Lgging (30 events) Pushbuttns: Emergency Stp Manual Start and Stp Manual/Aut/Test Lamp Test Hrn Silence Indicating Lights: Cmmn Alarm Generatr Ready (Vltage and Frequency Nrmal) FEATURES Electrical Rating: Enclsure: Engine Senders: Requirements: - Single r three phase, 600VAC maximum, 50/60HZ, 4 wire - 12 r 24Vdc (nminal) supply, negative grund. - Dedicated Output Cntacts - Engine Crank; Run (30 VDC / 6 Amps) - Three Prgrammable Output Cntacts (30 VDC / 1 Amps) - Black Nema 1 enclsure c/w rubber munts - Oil pressure (1/8 NPT), Temperature (1/4 NPT) (Supplied lse fr engine munting). - Exceeds requirements f CSA 282 and NFPA 110 Level 5-7
6 OPTIONAL SILENCER ACCORDING TO THE APPLICATION Silencer with different levels frm attenuatin Critical Grade Super Critical Grade Hspital Grade DOCUMENTATION AND OTHERS Levels frm attenuatin Manual f peratin and maintenance Spare parts Maintenance Cnsulting MISCELLANEOUS EQUIPMENT Batteries f 12 VDC with cables fr battery cnnectin with the Engine. antifreeze GENSET OPTIONS Cntrl Panel USC 300C Cntrl Panel is standard n all units see page 4 f spec sheet fr standard features. Anther Type Fuel system Exhaust System Fuel Water Separatr Day tank Auxiliary fuel pump Sub Base munted Fuel Tank Single Wall Duble Wall UL listed 150 L (39.6 gal) 250 L (66 gal) Diesel Fuel Tank 500 L (132 gal) 1000 L (264.1 gal) 5000 L ( gal) Critical Grade Super Critical Grade Hspital Grade Engine Electrical system Battery Lead-Acid NiCad Battery Rack Battery Charger Autmatic Generatr Breaker in the alternatr OPTIONAL ACCESSORIES AVAILABLE FOR THE EQUIPMENT Vibratin islatin Filters Drain Rigid Spring Munting Resilient Munting Air Filter fr Medium Dust Envirnments Air Filter f Heavy Dust Envirnments Oil drain Extensin Enclsures Sund Attenuated Weather Prf Stainless steel cver Trailer Munting Interir lights Ac r DC Heaters Jacket Water Heater Crankcase Oil Heater Insulatin Blankets Features: ( Temperature t 1260 C (2300 F), Nn- Cmbustible, Highly Resistant t Vibratin, Oil, Fuel, Grease, and Misture Resistant Exterir, Persnal Prtectin Ntes 6-7
7 DIMENSIONS LENGTH WIDTH HEIGHT mm (in) mm (in) mm (in) 2500 (98) 1000 (39) 1600 (63) NOTE: General cnfiguratin nt t be used fr installatin. See general dimensin drawing fr detail. SERVICES Develpment f the prject. Develpment f engineering. Equipment s Installatin Engineering fr special applicatins. Synchrnies with utility netwrk r mre Gensets. Attentin and technical supprt On-Site Acustic Enclsure ISO Cntainer Trailer INSTALLATION OPTIONS OF THE GENSET 7-7
MAQUINARIA IGSA POWER GENERATION SYSTEMS
MAQUINARIA IGSA POWER GENERATION SYSTEMS MODEL: GSJD10125M DIESEL ENGINE: JOHN DEERE MODEL: 6068TF250, TIER 1 CAPACITY: 125 kw; 1800 RPM PRIME hp (kw) 142-148(106-111) RATINGS RANGE STANDBY hp (kw) 158-166(118-124)
More information100 KW / 125 KVA POWERED by
100 KW / 125 KVA POWERED by MODEL Tritn Pwer is a wrld leader in the design, manufacture f statinary, mbile and rental generatr sets and Pwer Mdules frm 10 t 2000 kw. Thrugh ur cmmitment t quality we manufacture
More informationHCI634J - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 and 312 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCI634G - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationHCI634H - Winding 311 and 312. Technical Data Sheet
HCI634H - Winding 311 and 312 Technical Data Sheet HCI634H SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCI224F - Winding 25. Technical Data Sheet APPROVED DOCUMENT
- Winding 25 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as
More informationUCDI224E - Technical Data Sheet
UCDI224E - Technical Data Sheet UCDI224E SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCI634H - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet
HCI634H - Winding 311 and 312 Technical Data Sheet HCI634H SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI634J - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet
HCI634J - Winding 311 and 312 Technical Data Sheet HCI634J SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI 534E/544E - Technical Data Sheet
HCI 34E/44E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCI 434E/444E - Technical Data Sheet
HCI 434E/444E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI274H - Technical Data Sheet Winding 06
- Technical Data Sheet Winding 06 SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCDI274J - Technical Data Sheet
UCDI274J - Technical Data Sheet UCDI274J SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI224F - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet the requirements of eliminates
More informationUCI274H - Technical Data Sheet
UCI274H - Technical Data Sheet UCI274H SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCI634H - Technical Data Sheet
HCI634H - Technical Data Sheet HCI634H SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI224F - Technical Data Sheet
UCI224F - Technical Data Sheet UCI224F SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCM634K - Winding 311 and 312 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 and 312 Technical Data Sheet SPECIFICATIONS & OPTIONS WINDING 311 and 312 STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCDI224F - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
More informationUCM274E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCM274E - Winding 311 Technical Data Sheet UCM274E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd
More informationUCI274C - Technical Data Sheet Winding 06
- Technical Data Sheet Winding 06 SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationPI144D - Winding 17. Technical Data Sheet APPROVED DOCUMENT
PI144D - Winding 17 Technical Data Sheet PI144D SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 34 and the relevant section of other international standards
More informationUCM274E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT
UCM274E - Winding 311 Single Phase Technical Data Sheet UCM274E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd
More informationHCI434C/444C - Winding 17 APPROVED DOCUMENT. Technical Data Sheet
- Winding 17 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 34 and the relevant section of other international
More informationUCI224F - Winding 14. Technical Data Sheet APPROVED DOCUMENT
UCI224F - Winding 14 Technical Data Sheet UCI224F SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCM274C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCM274C - Winding 311 Technical Data Sheet UCM274C SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd
More informationUCI224C - Technical Data Sheet
UCI224C - Technical Data Sheet UCI224C SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationP734H - Technical Data Sheet
P734H - Technical Data Sheet Standards STAMFORD industrial alternators meet the requirements of the relevant parts of the BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationUCM224D - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT
UCM224D - Technical Data Sheet UCM224D SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other
More informationUCI274D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCI274D - Winding 311 Technical Data Sheet UCI274D SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationPI044G - Winding 06 APPROVED DOCUMENT. Technical Data Sheet
- Winding 06 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCI224G - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other
More informationPI144J - Winding 05 APPROVED DOCUMENT. Technical Data Sheet
- Winding 05 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationBCI164D - Technical Data Sheet
BCI164D - Technical Data Sheet BCI164D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI274D - Technical Data Sheet
UCI274D - Technical Data Sheet UCI274D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationBCI164B - Technical Data Sheet
BCI164B - Technical Data Sheet BCI164B SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationBCI164C - Technical Data Sheet Winding 06
- Technical Data Sheet Winding 06 SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI274D - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
More informationUCI274G - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
More informationUCI224E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCI224E - Winding 311 Technical Data Sheet UCI224E SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationUCDI274K - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationPI044D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
PI044D - Winding 311 Technical Data Sheet PI044D SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCDI274J - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCDI274J - Winding 311 Technical Data Sheet UCDI274J SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationUCI224E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet the requirements of eliminates
More informationUCI224C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
UCI224C - Winding 311 Technical Data Sheet UCI224C SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationPI044D - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI144G - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI044H - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI044F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI044E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI144E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI144F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationUCI224D - Winding 311 APPROVED DOCUMENT. Technical Data Sheet. Generator Solutions AS
UCI224D - Winding 311 Technical Data Sheet UCI224D SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationPI144D - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationPI144J - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000, VDE
More informationUCI274E - Winding 14 APPROVED DOCUMENT. Technical Data Sheet
UCI274E - Winding 14 Technical Data Sheet UCI274E SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCDI274K - Technical Data Sheet
UCDI274K - Technical Data Sheet UCDI274K SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationS5L1D-G4 Wdg Technical Data Sheet
- Technical Data Sheet Standards STAMFORD industrial alternators meet the requirements of the relevant parts of the IEC EN 60034 and the relevant section of other international standards such as BS5000,
More informationHCI 534C/544C - Technical Data Sheet
HCI 34C/44C - Technical Data Sheet HCI34C/44C SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCI274E - Winding 06 APPROVED DOCUMENT. Technical Data Sheet
- Winding 06 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as
More informationUCI224E - Winding 06. Technical Data Sheet APPROVED DOCUMENT
- Winding 06 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as
More informationHCM434E - Winding 311 Single Phase. Technical Data Sheet APPROVED DOCUMENT
HCM434E - Winding 311 Single Phase Technical Data Sheet HCM434E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd
More informationLVI634E - Technical Data Sheet
LVI634E - Technical Data Sheet LVI634E SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationPI144K - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
PI144K - Winding 311 Technical Data Sheet PI144K SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationPI044F - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
PI044F - Winding 311 Technical Data Sheet PI044F SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationPI144J - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
PI144J - Winding 311 Technical Data Sheet PI144J SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationUCI224C - Winding 06. Technical Data Sheet APPROVED DOCUMENT
UCI224C - Winding 06 Technical Data Sheet UCI224C SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI 434E/444E - Technical Data Sheet
HCI 434E/444E - Technical Data Sheet HCI434E/444E SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationUCM274C - Technical Data Sheet
UCM274C - Technical Data Sheet UCM274C SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications
More informationHCM534F - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
- Winding 311 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications
More informationUCM274H - Technical Data Sheet
UCM274H - Technical Data Sheet UCM274H SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications
More informationHCI 534F/544F - Technical Data Sheet
HCI 34F/44F - Technical Data Sheet HCI34F/44F SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCI 434D/444D - Technical Data Sheet
HCI 434D/444D - Technical Data Sheet HCI434D/444D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international
More informationHCM534D - Winding 14 APPROVED DOCUMENT. Technical Data Sheet
- Winding 14 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards
More informationPI734G - Winding 312. Technical Data Sheet APPROVED DOCUMENT
- Winding 312 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant sections of other national and international standards
More informationPI736F - Winding 312. Technical Data Sheet
PI736F - Winding 312 Technical Data Sheet PI736F SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant sections of other national and international
More informationHCI 534E/544E - Technical Data Sheet
HCI 34E/44E - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationHCI 534E/544E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
HCI 34E/44E - Winding 311 Technical Data Sheet HCI34E/44E SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationHCI 534C/544C - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
HCI 34C/44C - Winding 311 Technical Data Sheet HCI34C/44C SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant
More informationHCI434E/444E - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
HCI434E/444E - Technical Data Sheet HCI434E/444E SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet
More informationHCI534F/544F - Winding 311 Single Phase APPROVED DOCUMENT. Technical Data Sheet
HCI34F/44F - Technical Data Sheet HCI34F/44F SPECIFICATIONS & OPTIONS STANDARDS WINDINGS & ELECTRICAL PERFORMANCE All generator stators are wound to 2/3 pitch. This Stamford industrial generators meet
More informationPM734E - Winding 28. Technical Data Sheet APPROVED DOCUMENT
- Winding 28 Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards and certifications
More informationHCI 434F/444F - Technical Data Sheet
HCI 434F/444F - Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
More informationBCI164A - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationBCI184J - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationBCI184H - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationHCI634V - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS5000,
More informationAPS60 Rental Generator Set Specification
APS60 Rental Generatr Set Specificatin CSA Certified STANDBY 60 kw 60 Hz/PRIME 54 kw 60 Hz FEATURES EPA TIER 4 INTERIM AND CARB CERTIFIED FOR NON-ROAD MOBIE APPICATIONS. An extremely rugged cnstructin
More informationAPS100 Rental Generator Set Specification
APS100 Rental Generatr Set Specificatin CSA Certified STANDBY 100 kw 60 Hz/PRIME 90 kw 60 Hz FEATURES EPA TIER 4 INTERIM AND CARB CERTIFIED FOR NON-ROAD MOBIE APPICATIONS. Vltage Standby kw (kva) Prime
More informationMagnum Combination Unit MTT25 Specifications
ENGINE Empwering Real Peple Magnum Cmbinatin Unit MTT25 Specificatins Isuzu 4LE1-PV05 - liquid cled, diesel engine Standby - 34.5 hp @ 1800 rpm Prime - 31.5 hp @ 1800 rpm 4 cylinder 2.20 L displacement
More informationGMS100C / GMS100CS. Features: EC Series
Features: Excitation system: self-excited (AREP and PMG are optional) ATS (automatic transfer switch) receptacle Lockable battery isolator switch Stainless galvanized zinc plates with strong corrosion
More informationGMS1400C / GMS1400CS. Features: EC Series
Features: Excitation system: self-excited (AREP and PMG are optional) ATS (automatic transfer switch) receptacle Lockable battery isolator switch Stainless galvanized zinc plates with strong corrosion
More informationQSK23-G3. Description. Features rpm (50 Hz Ratings) 1800 rpm (60 Hz Ratings)
QSK23-G3 Description The QSK23 is an in-line 6 cylinder engine with a 23 litre displacement. This Quantum series utilizes sophisticated electronics and premium engineering to provide outstanding performance
More informationWCS2000 / WCS2000S. Features: WCS Series
Features: Excitation system: self-excited (AREP and PMG are optional) ATS (automatic transfer switch) receptacle Lockable battery isolator switch Stainless galvanized zinc plates with strong corrosion
More informationGMS450C / GMS450CS. Features: EC Series
Features: Excitation system: self-excited (AREP and PMG are optional) ATS (automatic transfer switch) receptacle Lockable battery isolator switch Stainless galvanized zinc plates with strong corrosion
More informationReliable and Intelligent Energy
BRAND: MODEL: TYPE: RANGE: Descriptin : AEM DW200EI SOUNDPROOFED DEUTZ SOUNDPROOFED 200 KVA Sundprfed Genset SOUNDPROOFED SERIES General Specificatins f the Generating Set GENSET DATA CONTINUOUS POWER
More informationReliable and Intelligent Energy
BRAND: MODEL: TYPE: RANGE: Descriptin : AEM MTU725ES STANDARD MTU HEAVY STANDARD 725 KVA Open Generating Set STANDARD SERIES General Specificatins f the Generating Set GENSET DATA CONTINUOUS POWER (PRP)
More informationSIDE VIEW FRONT VIEW
MODELS PNE 15 PNY 15 112.24 112.24 97. (38.18") 61. 66. 66. 15.24 22. 131. 175. SIDE VIEW 22. FRONT VIEW DESCRIPTION TOP VIEW RADIATOR: 43C-15G -THE GENSET DIMENSIONS ARE THE SAME BY FAMILY MODEL, THERE
More informationTAD1641GE VOLVO PENTA GENSET ENGINE
VOLVO PENTA GENSET ENGINE TAD1641GE 484 kw (658 hp) at 1500 rpm, 565 kw (768 hp) at 1800 rpm, acc. to ISO 3046 7744737 - Downloaded from www.volvopenta.com 22/07/2012 12:37:22 The TAD1641GE is a powerful,
More informationINVERTER/CHARGERS EVOLUTION SERIES. Off-Grid Power Solutions. How an Inverter/ Charger. Works... ORDER NOW
D yu yu need reliable AC pwer in a vehicle, remte lcatin r fr emergency back-up? Samlex s inverter/charger is THE chice fr a cmplete ff-grid pwer slutin. Off-Grid Pwer Slutins LUTION SERIES S Sine 1 Pure
More information