Blohm + Voss B+V hinged Adapter
|
|
- Asher Greer
- 5 years ago
- Views:
Transcription
1 Blohm + Voss B+V hinged Adapter 49 /2 to 37 /2 for RT National Inspection and maintenance procedure Part No
2 Blohm+Voss Oil Tools Hermann-Blohm-Straße Hamburg Germany Telephone ++49 (0)40/39-826/62 Fax ++49 (0)40/ Revision date: 202 All rights retained. No part of this document may be reproduced in any form (print, photocopy, microfilm or any other procedure)or be processed using an electronic system without written approval of Blohm+ Voss Oil Tools Dependent on ongoing technical improvements (ISO 900) B+V Oil Tools reserves the right to be able to change the design and specifications without previous announcement. The values specified represent the nominal values of a unit produced in series production. Slight deviations in the case of the individual devices are possible. 2
3 Content Service, Maintenance and Parts Description Installation Procedure Maintenance and Inspection Parts Address List...7 3
4 Service, Maintenance and Parts. Description The adapter is available for 49 / 2 " rotary tables of the type NATIONAL and belongs to our adapter family. MPCH, split casing bushing, power slips can be used with this adapter. The adapter is inserted directly into the rotary table. This ensures that the casing being run is perfectly aligned with the center of the hole. Adapter can be used together with adapter It is possible to reduce the diameter of 60 / 2 down to 37 / 2 2. Installation Procedure Inspect the top side of the rotary table bore for damaged edges. Chamfer as required to allow the adapter to enter the rotary table freely. Clean and grease the inside surface of the rotary table. 2. Inspect the blocks () and screws with the retaining rings (2) which secure the screws. If the screws are loose, they must be screwed down. The blocks must fit well in the adapter. 3. Inspect the hinges and lifting eyes (3)(4) before the adapter is to be lifted. 4. Screw down the lifting eyes and inspect them before using. 5. Engage lifting sling hooks in the lifting eyes (4) provided in the adapter, lift and lower into the rotary table. 6. After the adapter has been fitted in the rotary table, the lifting eyes have to be removed. This provides proper and safe work with this adapter 4
5 3. Maintenance and Inspection. Clean and remove abrasive material from inside of the adapter. Use a disc grinder to remove any rough surfaces or gall marks. 2. Remove, clean and lubricate the hinge pins after using the adapter. 3. Inspect all edges of the blocks () and their fit in the adapter. 4. Regularly inspect the condition of the hinge pins (crack or other wear) 5. The adapter should be well cleaned and painted before it will be stored. 5
6 4. Parts Pos. 2 stick in with Loctite Stempelfeldtext: Adapterring for RT 49.5" NATIONAL P/N SERIAL-NO: XXX B+V XX/XX API 7K PSL /SR weight: 2200 kg 0 2 w Rz 00 x Rz 25 y Rz 6 z Rz 6, Stck 7626 threaded pindin 94 M2x20-2 Stck 6258 Protection Cap Stck Grease nipple G/8" Stck Safety Sheet DIN Stck 6558 ScrewDIN 933-M2x Stck Securing Plate Stck 7556 Lifting eye Thiele M20, 2000 kg Stck Securing Ring DIN x,2-4 8 Stck DIN 92 M6x Stck Adapter Plate 2x 4,5 kg 2 2 Stck Hinge Pin 2x 2 kg 2 Stck 5532 Hinged Adapter 2x 062 kg Pos Mge Eht Partnr. Bezeichnung Bemerkung The present document is the property of BLOHM & VOSS Repair GmbH This document or any part there of must neither be used, reproducted, communicated, published, nor made known third parties in any other way, unless the corresponding authorisation has been previously obtained from Blohm & Voss writing Stückliste geändert ST ch.no engineering change day name Tolerance DIN ISO Surface DIN ISO 2768-m 302 day name drawn M.M. check J.G. norm BLOHM & VOSS Repair GmbH Oil Tool Division Hamburg-Germany AUTHORIZED MANUFACTURER Scale : Weight 2200kg Werkstoff part name Adapterring for RT 49.5" National, Assembly part no. sheet sh. h:\prtakt\ - 6
7 5. ADDRESS LIST Blohm + Voss Oil Tools Hermann-Blohm-Straße Hamburg Germany Phone: /39-826/62 Fax: / oiltools@blohmvoss.com Blohm + Voss Oil Tools, LLC 7670 Woodway, Suite 266 Houston, Texas United States of America Phone: Fax: bvot@blohmvoss.com Premier Sea & Land Pte. Ltd., Scotts Road #9-2 Shaw Centre Singapore Republic of Singapore Phone: Fax: enquiries@mtqpremier.com.sg 7
TECHNICAL DOCUMENTATION
Read before first use! VES-CL-1000 Elevator Hydraulically Operated Part No. 611000-Y-H Blohm + Voss Oil Tools Hermann-Blohm-Straße 2 20457 Hamburg Germany Telephone ++49 (0)40/3119-1826/1162 Fax ++49 (0)40/3119-8194
More informationBlohm+Voss. BVE / BVS /8 7.5/8 250 metric tons
Blohm+Voss BVE / BVS 250 2.3/8 7.5/8 250 metric tons Part-No. 725000 READ THESE INSTRUCTIONS BEFORE USE! Blohm+Voss Oil Tools Hermann-Blohm-Straße 2 20457 Hamburg Germany Telephone ++49 (0)40/3119-1826/1162
More informationBlohm+Voss BVE/S-750 Elevator/Spider 4 ½ 14 Pipe Range Diameter
Read before first use! Blohm+Voss BVE/S-750 Elevator/Spider 4 ½ 14 Pipe Range Diameter Part No. 710000-Y-H hydraulic version Blohm + Voss Oil Tools Hermann-Blohm-Straße 2 20457 Hamburg Germany Telephone
More informationBlohm+Voss Pipe Handling Equipment Special Link Connector Technical Documentation Original instructions
Blohm+Voss Pipe Handling Equipment Special Link Connector Technical Documentation Original instructions Manual PN 554106-D Rev. 002, May 2012 Blohm + Voss Oil Tools 1 GENERAL INFORMATION Warnings and Note
More informationCONTROL UNIT FOR POWER SLIPS PN:
CONTROL UNIT FOR POWER SLIPS PN: 757105 Blohm + Voss Oiltools Herrmann-Blohm-Strasse 2 20457 Hamburg Germany Telephone ++49 (0)40/3119-1826/1162 Fax ++49 (0)40/3119-3305 Revision 001, February 2012 All
More informationPipe Handling Equipment
Pipe Handling Equipment Blohm+Voss Repair GmbH Oil Tool Division Hermann-Blohm-Straße 2 20457 Hamburg, Germany Phone: +49-40-31 19-81 42 Fax: +49-40-31 19-34 00 E-mail: info@blohmvoss-oiltools.com www.blohmvoss-oiltools.com
More informationBlohm + Voss Oil Tools Circular Buttons, Inserts and Dies Catalog
Blohm + Voss Oil Tools Circular Buttons, Inserts and Dies Catalog A company of ThyssenKrupp Marine Systems Blohm + Voss Repair Blohm + Voss Oil Tools General Information Brochure Contents INSERTS: DIMENSIONS...
More informationBlohm+Voss Pipe Handling Equipment Safety Clamps Type C and T Technical Documentation Original Instructions
Blohm+Voss Pipe Handling Equipment Safety Clamps Type C and T Technical Documentation Original Instructions Manual PN 88003-D Rev. 010, August 2013 Blohm + Voss is a trademark of Blohm + Voss Shipyards
More informationBlohm + Voss Oil Tools
Blohm + Voss Pipe Handling Equipment Rotary Hand Slips: RSM / RSX / LRS Drill Collar Slips: DCS / DCM / DCL Casing Slips: CSL / CSC Technical Documentation Original Instructions Manual PN 83500-D Rev 008,
More informationBlohm + Voss Pipe Handling Equipment VES-CL Center Latch Elevator, Manual Operated c/w Bushing Technical Documentation Original Instructions
Blohm + Voss Pipe Handling Equipment VES-CL 150-1000 Center Latch Elevator, Manual Operated c/w Bushing Technical Documentation Original Instructions Manual PN 611000-Y-D Rev 003 February 2012 Blohm +
More informationBlohm+Voss Pipe Handling Equipment FPS 500-AIR Flush Power Slip Technical Documentation Original Instructions
Blohm+Voss Pipe Handling Equipment FPS 500-AIR Flush Power Slip Technical Documentation Original Instructions Manual 754000-AIR-D Rev 000, October 2012 Blohm + Voss Oiltools 1 GENERAL INFORMATION Warnings
More informationBlohm + Voss Pipe Handling Equipment ABVC-200 Sliptype Elevator Technical Documentation Original Instructions
Blohm + Voss Pipe Handling Equipment ABVC-200 Sliptype Elevator Technical Documentation Original Instructions Blohm + Voss Oil Tools Manual PN 672600-Y-D Rev 003, February 2012 1 GENERAL INFORMATION Warnings
More informationBlohm + Voss Oil Tools
Blohm+Voss Pipe Handling Equipment Hydraulic Operated Elevator/Spider BVE / BVS 500 PN 752000-Y-H-VC 4.1/2-14 Technical Documentation Original Instructions Manual PN 752000-Y-H-VC-D Rev 001, February 2012
More informationBlohm + Voss Pipe Handling Equipment BVE / BVS 750 Frame 1 air operated 4.1/2 14 Technical Documentation Original Instructions
Blohm + Voss Pipe Handling Equipment BVE / BVS 750 Frame 1 air operated 4.1/2 14 Technical Documentation Original Instructions Manual PN 710000-Y-A-D Rev 004, February 2012 Blohm + Voss Oil Tools 1 GENERAL
More informationBlohm + Voss Pipe Handling Equipment SDS Side Door Elevators 65, 100, 150, 250, 350 & 500 tons Technical Documentation Original Instructions
Blohm + Voss Pipe Handling Equipment SDS Side Door Elevators 65, 100, 150, 250, 350 & 500 tons Technical Documentation Original Instructions Manual PN 641020-Y-BC-D Rev 013, Mai 2013 Blohm + Voss Oil Tools
More informationBlohm + Voss Oil Tools, LLC GraySpin Mark 40 Hydraulic Drill Pipe Spinner With and without Hydraulic Lift Technical Documentation
Blohm + Voss Oil Tools, LLC GraySpin Mark 40 Hydraulic Drill Pipe Spinner With and without Hydraulic Lift Technical Documentation 1 GENERAL INFORMATION Warnings and Notes WARNING: A WARNING INDICATES A
More informationInnovative Landing String system for ultra-deep offshore
Innovative Landing String system for ultra-deep offshore V. Flores, J.Franchi, S. Granger Vallourec Drilling Products A. Vierke, J. Grotherr Blohm+Voss Oil Tools Introduction Offshore industry trends:
More informationBlohm + Voss Oil Tools
Blohm+Voss Pipe Handling Equipment VES-HCL 350 Elevator Hydraulically Operated Part no. 63000-Y-H-F (with closing signal) Technical Documentation Original Instructions Manual PN 63000-Y-H-F-D Rev 005 valid
More informationShaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Table of Contents Tru-Line Flange-Couplings
More informationCONDA-VRC Type Series Booklet
Pressure Reducing Valve PN 16/25/40/63 DN 15-150 Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13726 Second edition 2008-03-01 Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm Accessory mounting dimensions Transmissions
More informationKnife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
More informationSwing Check Valve AKR/AKRS. PN DN 80/80 to 300/250. Type Series Booklet
Swing Check Valve AKR/AKRS PN 63-160 DN 80/80 to 300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKR/AKRS All rights reserved. The contents provided herein must neither be distributed,
More informationPNEUMATIC CLUTCH-BRAKE SERIE 58
MOUNTING & MAINTENANCE INSTRUCTIONS PNEUMATIC CLUTCH-BRAKE SERIE 58 PLEASE READ THIS MANUAL VERY CAREFULLY BEFORE SETTING UP THE CLUTCH-BRAKE UNIT GOIZPER S. COOP. Antigua, 4 20577 Antzuola (Guipúzcoa)
More informationISO INTERNATIONAL STANDARD. Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances
INTERNATIONAL STANDARD ISO 10285 Second edition 2007-11-01 Rolling bearings Sleeve type linear ball bearings Boundary dimensions and tolerances Roulements Roulements linéaires à recirculation de billes,
More informationShut-off valves and accessories for pressure measuring instruments
Data Sheet 10/14-4.31-EN Shut-off valves and accessories for pressure measuring instruments Non-replaceable seat and plug Application Shut-off valves for pressure measuring instruments are designed for
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 7483 First edition 1991-10-01 --- ---- -.----.----_-- -_ ----- - - Dimensions of gaskets for use with flanges to IS0 7005 Dimensions des joints B utiliser avec les brides de
More informationSwivel Joints Rotary Unions
Maschinenbau GmbH & Co. KG Swivel Joints Rotary Unions since 1970 Knowledge and experience General Information We about us Klaas Maschinenbau GmbH & Co. KG was founded in the year 1970 and is an independent
More informationIndustrial Valves and Flanges
Industrial Valves and Flanges PN16 ANSI150 (B16.1) Industrial Valves highest demands. Butterfly Valves are made of ductile iron and a selection of high-grade materials for Lug Type Butterfly Valves VE200
More informationMounting Instruction MiniSKiiP
Mounting Instruction MiniSKiiP Revision: 1.2 Issue date: 2014-11-03 Prepared by: Musamettin Zurnaci Approved by: Markus Pohl Keyword: Mounting Instruction MiniSKiiP 1. Related Documents... 2 2. Surface
More informationSPARE PART LIST LIFTKET Version B13
Issue January 2014 SPARE PART LIST LIFTKET Version B13 SP-Code Description Description of spare part section Page AA Lifting gear 01: Hoist body 4-5 02: Clutch Brake 6-8 03: Stator 9-10 04: Gear 11-13
More informationViscosity - Flow Cups. elcometer.com
elcometer.com Viscosity - Flow Cups 1 Viscosity - Flow Cups Elcometer 2350 & 2354 Viscosity Flow Cups Viscosity Flow Cups are very easy to use instruments made of anodized aluminium with a stainless steel
More informationMD 80, DC-9, B-717 Tow Bar Equipment Manual
MD 80, DC-9, B-717 Tow Bar Equipment Manual Use This Manual for 1. Operating Procedures 2. Maintenance Procedures 3. Tow Bar and Parts Ordering For ordering new Tow Bars or Renewable Parts Please contact:
More informationWashability & Abrasion. Elcometer 5135 & Rotary Abrasers. elcometer.com
Elcometer 5135 & 5155 elcometer.com Rotary Abrasers 1 Elcometer 5135 & 5155 Taber Rotary Abrasers Used primarily in the testing of ceramics, plastics, textiles, metals, leather, rubber and painted, lacquered
More informationInstallation Instructions. Install Hubs Set Spacing Install Element FINISHED BORE INTERFERENCE FIT. Step 1 - HUB INSTALLATION
Instruction Manual for Baldor Dodge Raptor Spacer Couplings These instructions must be read thoroughly before installing or operating this product. Video walkthroughs of each installation procedure are
More informationGRIMAX 50,75,100,150 S - BRAKE
B E L T - G R I N D E R S GRIMAX 50,75,100,150 S - BRAKE Table of contents 1. Transport and handling 5 1.1 Transport 5 1.2 Handling 5 1.3 Placing 5 2. Directions 6 2.1 Operation 6 2.2 Safety rules for
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1206 Third edition 2001-11-15 Rolling bearings Needle roller bearings, dimension series 48, 49 and 69 Boundary dimensions and tolerances Roulements Roulements à aiguilles, séries
More informationSTAAL 40 AKK/AKKS. Type Series Booklet
Swing Check Valve STAAL 40 AKK/AKKS PN 10-40 DN 80-400 Bolted cover Flanged/Butt Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet STAAL 40 AKK/AKKS KSB Aktiengesellschaft Pegnitz
More informationInstallation and operating manual
LK product no: 901002 and 901102 501002 and 501102 (JIS) Article no: 74500 Revision: 9 Article no: 74500 Revision: 9 2 (23) Contents 1. General information... 5 2. Safety precautions... 5 2.1 Significance
More informationSPECIFICATIONS FOR BLEEDER PLUGS USED IN WELLHEAD APPLICATIONS
SPECIFICATIONS FOR BLEEDER PLUGS USED IN WELLHEAD APPLICATIONS TECHNICAL REPORT TR0701 AWHEM publications may be used by anyone desiring to do so. Every effort has been made by the Association to assure
More informationAKG-A/AKGS-A Type Series Booklet
Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,
More informationGate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN DN
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460
More informationISO 4016 INTERNATIONAL STANDARD. Hexagon head bolts Product grade C. Vis à tête hexagonale partiellement filetées Grade C. Fourth edition
INTERNATIONAL STANDARD ISO 4016 Fourth edition 2011-03-15 Hexagon head bolts Product grade C Vis à tête hexagonale partiellement filetées Grade C Reference number ISO 4016:2011(E) ISO 2011 PDF disclaimer
More informationRE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles
RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class
More informationKarussell- und Spezialmaschinenbau. Update on wear limits Zierer Wave Swinger Ride. To whom it may concern
ZIERER Karussell- und Spezialmaschinenbau GmbH Josef-Wallner-Str. 10, D -94469 Deggendorf Karussell- und Spezialmaschinenbau GmbH Ihre Nachricht vom: Ihre Zeichen: Unser Zeichen: Tel.-Durchwahl: Datum:
More informationAKG-A/AKGS-A. Type Series Booklet
Gate Valve AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A All rights reserved. The contents provided herein must neither be distributed,
More informationSwing Check Valve AKR/AKRS. PN DN 80/80 bis 300/250 Pressure Seal Design Flanged/Butt Weld Ends. Type Series Booklet
Swing Check Valve AKR/AKRS PN 63-160 DN 80/80 bis 300/250 Pressure Seal Design Flanged/Butt Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet AKR/AKRS KSB Aktiengesellschaft
More informationSpare Parts List Hydraulic Cutter
Spare Parts List Hydraulic Cutter CombiCutter CC 1501 CC 1501 Part ident. 3363 0028 87 Valid from 02/2003 GB Spare Parts List Hydraulic Cutter CombiCutter CC 1501 Atlas Copco Construction Tools GmbH Atlas
More informationeline Ball Screw Assemblies
eline Ball Screw Assemblies R310EN 3314 (2005.06) The Drive & Control Company R310EN 3314 (2005.06) Bosch Rexroth AG 3 Product Overview 4 Technical Data 6 with Screw-in Single Nut ZEV-E-S Single fixed
More informationShaft Couplings. Edition 2015/2016. Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Tru-Line Flange-Couplings
More informationOriginal instructions 1/15 PARTS MANUAL PMHB-550ENG.115 HYDRAULIC HAMMER HB-550
Original instructions 1/15 PARTS MANUAL PMENG.115 HYDRAULIC HAMMER TABLE OF CONTENTS 1.1. Housing unit 6 1.2. Impact unit 8 1.3. Seal set 10 1.4. Service kit 12 1.5. Service kit 2 13 1.6. Tool box 14 GENUINE
More informationISO INTERNATIONAL STANDARD. Diesel engines End-mounting flanges for pumps Part 1: Fuel injection pumps
INTERNATIONAL STANDARD ISO 7299-1 First edition 2007-02-01 Diesel engines End-mounting flanges for pumps Part 1: Fuel injection pumps Moteurs diesels Brides de montage des pompes Partie 1: Pompes d'injection
More informationThermal Oil / Hot Water Pump. Etanorm SYT. General Arrangement Drawings
Thermal Oil / Hot Water Pump Etanorm SYT General Arrangement Drawings Legal information/copyright General Arrangement Drawings Etanorm SYT All rights reserved. The contents provided herein must neither
More informationBlocks. your reliable partner
Blocks your reliable partner Dear Customer, For over 90 years the production of high tensile shackles has been our core business and competence. The designs and quality standards of our wire rope- and
More informationHST -LS Interlocking device (Translation of Original Manual)
Installation and Operating Manual for Components HST -LS Interlocking device (Translation of Original Manual) HST-LS Ident.-No.: 10268 HST-LS Ident.-No.: 10269 HST-LS, pictured Ident-Nr. 10269 The image
More informationSeries 09SVP Single Axis Valve Gate Nozzle
Series 09SVP Single Axis Valve Gate Nozzle Stabilize your Process CAT-01-0065_EN-Rev03 EN 01 / 2018 Product Description - Technical Data NOTICE Valve Pin Operation Operation medium Pressure range Flowrate
More informationYOUR GLOBAL FLOW CONTROL PARTNER. BRAY/MCCANNALOK EN High Performance Butterfly Valve Operation and Maintenance Manual
YOUR GLOBAL FLOW CONTROL PARTNER BRAY/MCCANNALOK EN High Performance Butterfly Valve TABLE OF CONTENTS 1.0 Definition of Terms....................................... 2 2.0 Introduction...........................................
More informationSpare Parts List Hydraulic Cutter
Spare Parts List Hydraulic Cutter CombiCutter CC 4000 CC 4000 002582 Valid from: 07/2002 GB Spare Parts List Hydraulic Cutter CombiCutter CC 4000 Atlas Copco Construction Tools GmbH Atlas Copco Construction
More informationAKG-A/AKGS-A. Type Series Booklet
AKG-A/AKGS-A PN 63-160 DN 80/80-300/250 Pressure seal bonnet Flanged/Butt Weld Ends Type Series Booklet Legal information/copyright Type Series Booklet AKG-A/AKGS-A KSB Aktiengesellschaft Pegnitz All rights
More informationOnBoard Drum Major Podium
Assembly and Owner s Manual OnBoard Drum Major Podium CONTENTS CONTENTS................................................................................. 1 SAFETY...................................................................................
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15524 First edition 2011-11-01 Pneumatic fluid power Cylinders Single-rod short-stroke cylinders, 1 000 kpa (10 bar) series, bores from 20 mm to 100 mm Transmissions pneumatiques
More informationSide Door Elevator SDS
Pipe-Handling-Equipment Hoisting Equipment Side Door Elevator SDS SDS / VES SDS / SDS-H Type Series Manual and hydraulic operated elevators SDS Type Series Side Door Collar Type Elevator VES SDS Type Series
More informationSpare Parts List SQUIX 6.3. Label Printer. Made in Germany
Spare Parts List Label Printer SQUIX 6.3 Made in Germany 2 Spare Parts List 2 for the following products Family Type SQUIX SQUIX 6.3/200 SQUIX 6.3/200P SQUIX 6.3/300 SQUIX 6.3/300P Edition: 07/2017 - Part
More informationTMC Semi-trailer Landing Gear Service Manual
TMC Semi-trailer Landing Gear Service Manual The Group Disclaimer Versioning The author and publisher have made their best efforts to prepare this manual, and the information contained in this manual is
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8535-1 Fifth edition 2011-12-01 Diesel engines Steel tubes for highpressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes Moteurs diesels
More information-Montage- und Betriebsanleitung
-Montage- und Betriebsanleitung JOST SATTELKUPPLUNG JSK 36 D & JSK 37 Installation and operating instructions for FIFTH WHEEL COUPLING JSK 36 D & JSK 37 Instructions de montage et de d utilisation pour
More information350 Ton Elevator Links/Link Extensions Operation Manual
TECHNICAL MANUAL 350 Ton Elevator Links/Link Extensions Operation Manual 2005-2015 Texas International Oilfield Tools, LTD. Published by Texas International Oilfield Tools, LTD, Engineering 14620 Henry
More informationSEMITOP2,3,4 Press-Fit
Mounting Instruction SEMITOP2,3,4 Press-Fit Revision: 03 Issue date: 2017-08-28 Prepared by: Roberto Agostini Approved by: Werner Obermaier Keyword: SEMITOP, mounting instructions, one screw mounting,
More informationISO 6022 INTERNATIONAL STANDARD. Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
INTERNATIONAL STANDARD ISO 6022 Second edition 2006-02-01 Hydraulic fluid power Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series Transmissions hydrauliques Dimensions d'interchangeabilité
More informationHydraulic fluid power Gas-loaded accumulators with separator Selection of preferred hydraulic ports
ISO 2017 All rights reserved ISO/TC 131/SC N Date: 2017-08-18 ISO/PDTR 10946 ISO/TC 131/SC /WG 1 Secretariat: AFNOR Hydraulic fluid power Gas-loaded accumulators with separator Selection of preferred hydraulic
More informationOriginal instructions 6/13 HYDRAULIC BREAKER. Parts Manual PMM7BSENG.613. Serial No. BT07A0005-UP
Original instructions HYDRAULIC BREAKER 6/13 Manual PMBSENG.613 Serial No. BT07A0005-UP TABLE OF CONTENTS 1. Housing unit BOX............................................................... 4 2. Housing
More informationGAR-SEAL. Dimensions DN (other sizes upon request) Adapter Flange EN ISO 5211 NF E
Applications GAR-SEAL butterfly valves are used in most cases where corrosive, abrasive and toxic media need to be controlled. GAR-SEAL valves are used, for controlling, throttling and shutting off purposes
More informationAirworthiness Directive
Airworthiness Directive AD No.: 2016-0142R1 Issued: 12 April 2018 EASA AD No.: 2016-0142R1 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13726 Second edition 2008-03-01 Hydraulic fluid power Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm Accessory mounting dimensions Transmissions
More informationLocking Assemblies for use with bending loads
EN 03 2011 Locking Assemblies for use with bending loads Partner for performance www.ringfeder.com A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 1922 in Krefeld, Germany
More informationTMH 15000/5. 15TE / 5F Air Hoist 1:5 DRG /11/ ,5 313,5 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number.
D-AH REV ITEM QTY PART NUMBER DRG 7 DRG 7 TMH PARTS LIST DESCRIPTION Top Block Bottom Block Air Hoist (with Lever Plate DRG 7 ) REV. REVISION HISTORY REV. DATE APPROVED : Scale Designed By Drawn By Checked
More informationISO 8379 INTERNATIONAL STANDARD. Rough terrain trucks Stability tests. Chariots élévateurs tous terrains à fourches Essais de stabillité
INTERNATIONAL STANDARD ISO 8379 First edition 1998-07-01 Rough terrain trucks Stability tests Chariots élévateurs tous terrains à fourches Essais de stabillité A Reference number Provläsningsexemplar /
More informationWear inspection / Non destructive testing / -- Addition to the maintenance checklist (see manual) and daily lubrication schedule: Facility:
Karussell- und Spezialmaschinenbau GmbH Wear inspection / Non destructive testing / -- Addition to the maintenance checklist (see manual) and daily lubrication schedule: Facility: Wave Swinger Park / Road
More informationNormpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction Pumps of the Norma J ( ) Series are horizontal volute casing centrifugal end suction pumps with Back Pull-out feature. Principal dimensions
More informationAxial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction RITZ ( ) ASE axial split case pumps has been developed for wide range of application benefiting both the industrial users and the municipality.
More informationSTAAL 40 AKD/AKDS Type Series Booklet
Gate Valve STAAL 40 AKD/AKDS PN 10-40 DN 50-600 Type Series Booklet Legal information/copyright Type Series Booklet STAAL 40 AKD/AKDS All rights reserved. The contents provided herein must neither be distributed,
More informationInstallation and Operating Instruction for Brake Caliper HW 150 HFA and HW 180 HFA E e
Installation and Operating Instruction for Brake Caliper HW 150 HFA and HW 180 HFA E 09.736e Schaberweg 30-38 Phone +49 6172 275-0 61348 Bad Homburg Fax +49 6172 275-275 Germany www.ringspann.com info@ringspann.com
More informationSOFT HANDS MEGA SERIES AND STANDARD SERIES INSTRUCTION MANUAL NEW ZEALAND AND AUSTRALIAN SPECIFICATION MACHINES ONLY
SOFT HANDS BY MEGA SERIES AND STANDARD SERIES INSTRUCTION MANUAL NEW ZEALAND AND AUSTRALIAN SPECIFICATION MACHINES ONLY IMPORTANT: Read this manual BEFORE operating the Hustler Soft Hands SOFT HANDS INSTRUCTION
More informationComponents Parts of Quicklub Pumps P 223 and 233
Components Parts of Quicklub Pumps P 223 and 233 6362b04 All rights reserved. Any duplication of this User Manual, in its entirety or in part, by whatever means is prohibited without the prior consent
More information580RK SERVICE GUIDELINES For coupling models: 580 & 580J
580 Coupling THE FIRST NAME IN QUALITY COUPLINGS 580RK SERVICE GUIDELINES For coupling models: 580 & 580J BEFORE GETTING STARTED: This procedure should only be performed by a qualified mechanic. Measure
More informationHYDRAULIC BREAKER HAMMER HB 50 J HAMMER HB 50 L HAMMER HB 50 U
PARTS MANUAL ver. 1.1 PMHB50ENG.051011 HYDRAULIC BREAKER HB 50 J HB 50 L HB 50 U Serial No. TRK500005-UP TRK510005-UP TRK520005-UP TABLE OF CONTENTS 1. Housing unit 50J... 4 2. Housing unit 50L... 6 3.
More information3- and 4-Way Ball Valves KH3/KH4
3- and 4-Way Ball Valves KH3/KH4 up to 500 bar up to DN 20 KH3 KH4 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, HYDAC 3/2 and 4/2 way ball valves are units which shut off and divert the flow of an
More informationPredelivery Instructions
PINK Predelivery Instructions SR5030 Split-Row Planter Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read this manual entirely. When you see this symbol, the subsequent instructions and
More information-Montage- und Betriebsanleitung
JOST SATTELKUPPLUNG JSK 40, JSK 4 -Montage- und Betriebsanleitung Installation and operating instructions for FIFTH WHEEL COUPLING JSK 40, JSK 4 Instructions de montage et d utilisation pour SELLETTE D
More informationGrey Water and Condensate Pump. Rotex. Type Series Booklet
Rotex Type Series Booklet Legal information/copyright Type Series Booklet Rotex Original operating manual All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationHEAVY DUTY CRANE HDC RANGE OPERATING G & MAINTENANCE INSTRUCTIONS
HEAVY DUTY CRANE HDC RANGE OPERATING G & MAINTENANCE INSTRUCTIONS 0599 SPECIFICATIONS cont... No. Description Part No. No. Description Part No. MAXIMUM SAFE WORKING LOADS (kg) HDC50 HDC100 HDC150 HDC200
More informationTRANSMISSIONS. Mechanical Power Transmission
TRANSMISSIONS Mechanical Power Transmission Dunlop BTL Ltd European Distribution Centre MPT House Brunswick Road Cobbs Wood Industrial Estate Ashford, Kent. UK TN23 1EL Contact us +44 (0)1233 663340 +44
More informationSpare Parts List SQUIX 4. Label Printer. Made in Germany
Spare Parts List Label Printer SQUIX 4 Made in Germany 2 Spare Parts List 2 for the following products Family Media guiding left-aligned Type Media guiding centered SQUIX SQUIX 4.3/200 SQUIX 4.3/200M SQUIX
More informationAIRLINE EQUIPMENT CATALOGUE //
AIRLINE EQUIPMENT CATALOGUE // 16 15 14 13 12 11 10 9 The Fort Vale Range of Airline Ball & Butterfly Valves 8 Fort Vale Engineering Ltd. 2014 THIS PAGE IS INTENTIONALLY BLANK AIRLINE VALVE CATALOGUE //
More informationCHECK VALVES. SERIES 700 Dual plate check valves // DN (2 48 ) // PN 10/16. // Waste water, sewage, thick and viscous liquids, water
SERIES 700 Dual plate check valves // DN 50 1200 (2 48 ) // PN 10/16 // Waste water, sewage, thick and viscous liquids, water SERIES 700HP Dual plate check valves // DN 50 600 (2 24 ) // PN 10/16/24 //
More informationISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes
INTERNATIONAL STANDARD ISO 4250-3 Fourth edition 2011-05-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 4250-3:2011(E)
More informationFORUM Pipe Handling Equipment
FORUM Pipe Handling Equipment General Catalog Handling Tools 11.2017 FORUM Pipe Handling Equipment Brochure Contents 1250 1750 TON EqUIPmENT... 04 LINkS / BAILS... 06 BECkETS... 11 ELEvATORS... 12 TUBING
More informationNon-return Valve BOA-RVK PN 6/10/16 DN Type Series Booklet
Non-return Valve BOA-RVK PN 6/10/16 DN 15-200 Type Series Booklet Legal information/copyright Type Series Booklet BOA-RVK KSB Aktiengesellschaft Pegnitz All rights reserved. Contents provided herein must
More informationISO 4395 INTERNATIONAL STANDARD. Fluid power systems and components Cylinder piston rod end types and dimensions
INTERNATIONAL STANDARD ISO 4395 Second edition 2009-10-15 Fluid power systems and components Cylinder piston rod end types and dimensions Transmissions hydrauliques et pneumatiques Dimensions et types
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More information