Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
|
|
- Clementine Carroll
- 5 years ago
- Views:
Transcription
1 Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg
2 2
3 Table of Contents Flange-Couplings Page Flange-Couplings RFK with backlash free cone-clamping-connection 4 Rigid Shaft Couplings Page Rigid Shaft Couplings RWK 500 for backlash free connection of two shaft ends 6 Flexible Couplings Page Flexible Couplings L 8 Flexible Couplings L with keyways 10 Flexible Couplings LK with clamping hubs 11 Flexible Couplings LF with flange connections 12 Flexible Couplings LA with flange connection and keyway 13 RFK RWK L LK LF LA Issue 02/ We reserve the right to make technical modifications. 3
4 Flange-Couplings RFK with backlash free cone-clamping-connection Features Stronger connection than traditional keyed connections No fretting corrosion Compact design Small axial space required for installation Fast disassembly for minimal downtime Proven solution in many applications 4-1 Applications A rigid and easy to disassemble shaft coupling solution for: Elevators Conveyor pulley drives Bucket elevators Escalators and moving walkways Many other applications Selection RINGSPANN will select the proper coupling for each application based upon the allowed transmissible torque under existing bending moment conditions. RINGSPANN s selection calculations are in accordance with the latest scientific knowledge and know how in the industry and include the proper safety factor to prevent fretting corrosion. Material RINGSPANN can offer shaft material recoendations based on calculated shaft compression stress. Flange-Coupling RFK 350 F M connects the drive unit to the transmission of an iron ore conveyor belt system in South Africa 4-2 Example for ordering Flange-Coupling RFK with inside-centred coupling half for shaft diameter 210 and outside-centred coupling half for shaft diameter 140 : RFK 210 F M, d F = 210, d M = 140 4
5 Flange-Couplings RFK with backlash free cone-clamping-connection N F F F M G + 5 H M G ø K R H F ø B ø d F h8 L F7 ø C øt ø D ø C -0,01-0,032 ø d M h8 Inside-centred Coupling Half Outside-centred Coupling Half 5-1 Flange-Coupling RFK Size Coupling Half Insidecentred Outsidecentred 50 F 50 M 70 F 70 M 90 F 90 M 115 F 115 M 140 F 140 M 170 F 170 M 210 F 210 M 211 F 211 M 250 F 250 M 270 F 270 M 290 F 290 M 320 F 320 M 350 F 350 M Shaft d F or d M min. 25 max. 50 min. 50 max. 70 min. 70 max. 90 min. 95 max. 115 min. 115 max. 140 min. 140 max. 170 min. 170 max. 210 min. 170 max. 210 min. 210 max. 250 min. 250 max. 270 min. 270 max. 290 min. 290 max. 320 min. 320 max. 350 Transmissible torque M max * Nm M red ** Nm Transmissible bending moment B C D F F F M G H F H M K L N R T Y*** Z*** Weight M bmax Nm kg M 10 x M 14 x M 16 x M 24 x M 24 x M 30 x M 30 x M 30 x M 30 x M 30 x M 30 x M 30 x M 30 x 150 Paired coupling halves of the same color can be interchanged due to matching flange patterns. The transmissible torques and bending moments of the smaller coupling half apply. * for bending moment M b = 0 ** for max. trans missible bending moment M bmax *** Y = Number of srews Z in accordance DIN EN ISO on pitch circle T. Surface finish of shaft R z max 16 μm. 7,5 6,
6 Rigid Shaft Couplings RWK 500 for backlash free connection of two shaft ends Features Centres the shaft to the shaft Easy to release For shaft diameters between 14 and Application example Simple and cost-effective connection of two shaft ends with a Rigid Shaft Coupling RWK 500. The Rigid Shaft Coupling connects the shafts without backlash. 6-2 Transmissible torques and axial forces The transmissible torques or axial forces listed on page 7 are subject to the following tolerances, surface characteristics and material requirements. Please contact us in the case of deviations. Tolerances h8 for shaft diameter d Surfaces Average surface roughness at the contact surfaces of the shafts R a 3,2 μm. Materials The following apply to the shaft and the hub: E-module ca. 170 kn/ 2 Simultaneous transmission of torque and axial force The transmissible torques M which are shown in the tables apply for axial forces F = 0 kn and con versely, the indicated axial forces F apply to torques M = 0 Nm. If torque and axial force are to be transmitted simultaneously, the transmissible torque and the transmissible axial force are reduced. For a given axial force F A, the reduced torque M red is calculated as: ßßßßßß M red =! M 2 - (F A d ) 2 2 For a given torque M A, the reduced axial force F red is calculated as: F red = Formula symbols 2 d! ßßßß M 2 - M 2 A M = Transmissible torque according to table [Nm] M A = Maximum actual application torque [Nm] M red = Reduced torque [Nm] F A = Maximum actual application axial force [kn] F red = Reduced axial force [kn] d = Shaft diameter [] 6
7 Rigid Shaft Couplings RWK 500 for backlash free connection of two shaft ends B L 2 L 1 L 1 ø D ø d ø d h Dimensions Technical Data Transmissible torque Clamping screws Weight or Tightening Number Size Length Size axial force torque d D B L 1 L 2 M F M S Nm kn Nm kg M6 45 0, M6 45 0, M6 45 0, M6 45 0, M6 45 0, M6 45 0, M6 45 0, M6 55 0, M6 55 0, M6 55 0, M6 55 0, M6 55 0, M8 70 0, M8 70 1, M8 70 1, M8 70 1, M8 80 1, M8 80 1, M8 80 1, M8 80 2, M8 80 2, M8 80 2, M , M , M , M , M ,000 Installation The shaft ends must at least overlap L 1. Please request our installation and operating instructions for Rigid Shaft Coupling RWK 500. Example for ordering Rigid Shaft Coupling RWK 500 for shaft diameter d = 50 : RWK 500, d = 50 7
8 Flexible Couplings L Features For very large parallel misalignments For angular misalignments of up to 3 Minimal radial forces Torsionally rigid No stick-slip action Compact design Small dimensions 8-1 with keyway with clamping hub with flange connection with keyway with clamping hub with flange connection Configuration The RINGSPANN flexible couplings are based on the proven Oldham principle. They consist of a flexible disc made of highly wear-resistant plastic resin and two coupling halves made of steel or spherical graphite iron. Different coupling solutions can be achieved by combining different coupling halves (see Fig. 8-2). The robust design of only three basic elements guarantees excellent reliability and easy mounting. The driving dogs of the two hubs engage by sliding into corresponding slots of the flexible disc, the slots being offset by 90, thereby compensating very large parallel misalignments of the shafts, if necessary. Furthermore, the support dogs - offset by 90 to the driving dogs - can compensate angular misalignments of up to 3. The rotation movement is always transmitted angle true. The particularly large, low-stress transmission surfaces are not subject to any elastic distortion or play and therefore no fatigue. Driving dogs and flexible disc should be greased with graphite paste or molybdenum disulphide as recoended in the operating instructions. This is not necessary if the couplings run in oil. Care must be taken that the flexible couplings are not affected by undue axial forces caused, for example, by heat expansion of the shafts. If necessary, the coupling has to be mounted with axial tolerance between support dogs and flexible disc. Possible combinations of different coupling halves 8-2 8
9 Flexible Couplings L Selecting the size of the flexible coupling The size of the flexible coupling is selected on the basis of the maximum load torque according to the familiar formula: M L = 9550 P n [Nm] In this formula: M L = Load torque of driven machine [Nm] P = Power required for driving the machine, which is in most cases lower than the nominal power of the motor [kw] n = Coupling speed [min -1 ] The load torque requirement M L calculated according to this formula is an average value, but in reality the transmitted torque M through the coupling is irregular, according to the irregularity of the driving power and the machine. The maximum peak torque of the drive should be lower than the torque capacity of the selected coupling according to the table. Where the precise irregularities of the torque are not known a service factor f should be applied. M max = 9550 P n f [Nm] This factor f is dependant on the type of drive and type of driven machine. In this formula: M max = maximum transmitted torque [Nm] f = service factor Service factor f Type of driven machine Driven by Belt drives, electric motors Combustion engines 4 and 6 cylinders Combustion engines 2 and 3 cylinders, single cylinder, steam engines Single cylinder combustion engines Belt drives, small generators, small ventilators, rotary blowers 1,5 1,7 1,9 2,2 Small hoists, larger ventilators, light machines for metal, wood and textile, small conveyors 1,8 2,0 2,2 2,5 Hoists for heavy loads, heavier conveyors, hanging conveyors, mixers, textile machines with high inertias 2,0 2,2 2,4 2,7 Presses, sheers, stumping machines, reciprocating pumps, calendars, pan grinders, haer mills 2,5 2,7 2,9 3,2 Welding generators, stone crushers, pinch roll drives, reciprocating compressors and reciprocating pumps without flywheels, rolling mills 3,0 3,2 3,4 3,7 9
10 Flexible Couplings L with keyways with keyway with keyway 10-1 Technical Data and Dimensions Coupling size torque Nm speed min -1 Inertia J kgm 2 parallel misalignment Rough bore d 1 or d 2 Finished bore d 1 or d 2 min. max. A L ,0001 0,50 4, M ,10 L ,0002 0, M ,20 L ,0003 0, , ,5 M ,38 L ,0004 1, M ,78 L ,0008 1, M ,70 L ,0013 1, M ,90 L ,0039 2, M ,70 L ,0097 2, M ,30 L ,0268 3, M ,10 L ,1110 4, M ,90 L ,2911 5, M ,90 L ,9767 7, M ,00 * Hub lengths F 1 and F 2 can be shortened with corresponding changes to dimensions A, C and L. B C D E F* G L O Weight with rough bore kg Please specify when ordering: Whether supply is required with rough bores as per catalogue or finished bored. If finish bored, give diameters d 1 and d 2. Tolerance of finished bores is H7. Keyways as per DIN 6885, p. 1. Example for ordering Flexible Coupling L 250 with finished bore d 1 55 and finished bore d 2 87 : L 250, d 1 = 55, d 2 = 87 10
11 Flexible Couplings LK with clamping hubs L F O F øe ød1 ød2 ød with clamping hub with clamping hub 11-1 Technical Data and Dimensions Coupling size torque Nm speed min -1 Inertia J kgm 2 parallel misalignment Rough bore d 1 or d 2 Finished bore d 1 or d 2 min. LK ,0001 0,5 4, ,10 LK ,0002 0, ,20 LK ,0003 0, , ,38 LK ,0004 1, ,78 LK ,0008 1, ,70 max. D E F L O Weight with rough bore kg Please specify when ordering: Whether supply is required with rough bores as per catalogue or finished bored. If finish bored, give diameters d 1 and d 2. Tolerance of finished bores is H7. Example for ordering Flexible Coupling LK 50 with finished bore d 1 8 and finished bore d 2 15 : LK 50, d 1 = 8, d 2 = 15 11
12 Flexible Couplings LF with flange connections with flange connection with flange connection 12-1 Technical Data and Dimensions Coupling size torque Nm speed min -1 Inertia J kgm 2 parallel misalignment B D H L LF ,0009 1, , , ,5 M 6 1 0,7 LF ,0026 2, , , ,5 M 6 2 1,4 LF ,0053 2, , , ,5 M 8 2 1,9 LF ,0051 2, , , ,0 M 8 3 1,7 LF ,0138 3, , , ,5 M ,2 LF ,0453 4, , , ,0 M ,0 LF ,1314 5, , , ,0 M ,3 LF ,5203 7, , , ,0 M ,2 1) Arrangement of fastening holes for screws Z (DIN EN ISO 4762) on pitch circle T. The hole pattern on the other coupling half is rotated by 90. M H7 N O P R T W Z Hole pattern 1) Weight with rough bore kg Hole pattern 1 Hole pattern 2 Hole pattern 3 Hole pattern 4 Example for ordering Flexible Coupling LF 250: LF
13 Flexible Couplings LA with flange connection and keyway with flange connection with keyway 13-1 Technical Data and Dimensions Coupling size torque Nm speed min -1 Inertia J kgm 2 parallel misalignment Rough bore d Finished bore d min. max. A B C LA ,0011 1, M 8 50,0 76, ,5 65 3,5 M 6 1 1,3 LA ,0032 2, M 8 61,0 90, ,5 75 4,5 M 6 2 2,6 LA ,0075 2, M 10 71,5 105, ,5 88 4,5 M 8 2 4,1 LA ,0074 2, M 10 71,5 105, , ,0 M 8 3 4,0 LA ,0203 3, M 12 90,0 131, , ,5 M ,7 LA ,0782 4, M , , ,0 M ,0 LA ,2113 5, M , , ,0 M ,6 LA ,7485 7, M , , ,0 M ,6 Keyways as per DIN 6885, p. 1. * The hub length F can be shortened with corresponding changes to dimensions A, C, K and L. 1) Arrangement of fastening holes for screws Z (DIN EN ISO 4762) on pitch circle T for coupling half with flange connection. D E F* G K L M H7 N O P T W Z Hole Weight pattern 1) rough with bore kg Hole pattern 1 Hole pattern 2 Hole pattern 3 Hole pattern 4 Please specify when ordering: Whether supply is required with rough bore as per catalogue or finished bore. If finished bore, give diameter d. Tolerance of finished bore is H7. Keyway as per DIN 6885, p. 1. Example for ordering Flexible Coupling LA 250 with finished bore 50 : LA 250, d = 50 13
14 Notes / sketches 14
15 Notes / sketches 15
16 Freewheels Backstops Automatic protection against reverse running of conveyor belts, elevators, pumps and fans. Overrunning Clutches Automatic engaging and disengaging of drives. Indexing Freewheels For gradual feed of materials. Housing Freewheels Automatic engaging and disengaging of multimotor drives for installations with continuous operation. Catalogue 84 Cage Freewheels For installation between customersupplied inner and outer rings. Catalogue 84 Catalogue 84 Catalogue 84 Industrial Disc Brakes Spring activated - pneumatically, hydraulically, electromagnetically or manually released. Industrial Disc Brakes Pneumatically activated spring released. Industrial Disc Brakes Hydraulically activated non-releasing or spring released. Industrial Disc Brakes Spring activated hydraulically released. Catalogue 46 Catalogue 46 Catalogue 46 Catalogue 46 Two-part Shrink Discs External clamping connection for simple and secure mounting without torque wrench. Three-part Shrink Discs External clamping connection for the fastening of hollow shafts on solid shafts. Cone Clamping Elements Internal clamping connection in small dimensions for high torques. Star and Clamping Discs Shaft-HubConnection for frequent clamping and release. Star Spring Washers Axial spring element for preloading of ball bearings. Catalogue 36 Catalogue 36 Catalogue 36 Catalogue 36 Catalogue 36 Torque Limiters with Screw Face Reliable overload protection for tough operating conditions. Torque Limiters with Rollers With double or single rollers. Through ratcheting or disengaging, also for 360 synchronous running. Torque Limiters with Balls Reliable overload protection with maximum response accuracy. Also backlash free. Force Limiters Reliable axial overload protection in rods. Catalogue 45 Catalogue 45 Catalogue 45 Torque Limiters with Friction Linings RIMOSTAT Torque Limiter for constant torque. Belleville Spring Torque Limiter for simple release. Catalogue 45 Flange-Couplings Rigid, easily removable shaft coupling with backlash free cone clamping connections. Rigid Couplings Rigid, easily removable shaft coupling with backlash free cone clamping connection. Flexible Couplings Large, allowed radial and angular misalignements. Minimum resiliency. Flexible Couplings Large, allowed radial and angular misalignements. Minimum resiliency. Catalogue 44 Catalogue 44 Catalogue 44 Catalogue 44 Catalogue 84 Brakes Clamping Units Spring activated hydraulically or pneumatically released. For secure and precise positioning of piston rods. Catalogue 46 Shaft-Hub-Connections Overload Clutches Catalogue 45 Couplings Precision Clamping Fixtures Bonded Disc Packs Precision Clamping Fixtures based on the unique method of the RINGSPANN Clamping Disc. Taper Collets Precision Clamping Fixtures for clamping thin or thick walled workpieces on long clamping length. Taper Sleeves Precision Clamping Fixtures for clamping compact workpieces with short or long clamping lengths. Flat Elements Very short Precision Clamping Fixtures for clamping thick walled workpieces with large clamping diameter and very short clamping depths. Clamping Clutches For rapid changes and precise clamping of profile rollers or printing rollers in printing presses in gravure and flexographic printing. Catalogue 10 Catalogue 10 Catalogue 10 Catalogue 10 Catalogue 10 Schaberweg Bad Homburg, Germany Phone Fax mailbox@ringspann.com
Shaft Couplings. Edition 2015/2016. Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Tru-Line Flange-Couplings
More informationFlexible Couplings 44
Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact
More informationShaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Table of Contents Tru-Line Flange-Couplings
More informationNEW. Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm. E03.050e
Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm NEW E03.050e Backlash free positioning Excellent concentricity Quick mounting by central clamping nut Issue
More informationHousing Freewheels for Multimotor Drives 80.1
s for Multimotor Drives 80.1 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg s FKhG for Multimotor Drives for automatic connecting and disconnecting of drives on pumps, fans, generators etc.
More informationForce Limiters 49. RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg
Force Limiters 49 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Why RINGSPANN Force Limiters? Why RINGSPANN Force Limiters? There are many ways of transmitting forces and torques in machines,
More informationShaft-Hub-Connections
Stand: 14.01.2010 Shaft-Hub-Connections Shrink Discs Cone Clamping Elements Star Discs 36 Edition 2012/2013 RINGSPANN Eingetragenes Warenzeichen der RINGSPANN GmbH, Bad Homburg Table of Contents Introduction
More informationTRADITIONAL SHAFT HUB CONNECTIONS
TABLE OF CONTENTS MAV locking devices.... Pg. 2 Traditional shaft hub connections...pg. 3 Advantages of MAV locking devices...pg. 4 The wedge principle..... Pg. 5 Installation removal...pg. 6 Characteristics....
More informationRIGIFLEX -N RADEX -N. Steel laminae coupling. Steel laminae coupling. You will find continuously updated data in our online catalogue at
117 Table of contents 117 Coupling selection steel laminae coupling 119 Description of coupling 121 General information 122 Types and applications 123 Technical data 124 Standard types 126 Special types
More informationFor advanced drive technology CLAMPEX. Shaft-Hub-Connection. KTR Precision Joints CLAMPEX
technology CLAMPEX Shaft-Hub-Connection CLAMPEX KTR Precision Joints 07 technology Table of contents Page Brief information 09 Selection and calculation -5 CLAMPEX -Selection Shaft diameter = d 0 10 0
More informationRING-flex. Torsionally Rigid Disc Couplings US Partner for performance 1. RINGFEDER Products are available from MARYLAND METRICS
RINGFEDER Products are available from MARYLAND METRICS RING-flex Torsionally Rigid Disc Couplings US 008 Partner for performance RINGFEDER Products are available from MARYLAND METRICS P.O. Box 6 Owings
More informationFor advanced drive technology CLAMPEX. Shaft-hub-connection. KTR Precision joints CLAMPEX
technology CLAMPEX Shaft-hub-connection CLAMPEX KTR Precision joints 227 technology Table of contents Page Brief information 228 Selection and calculation 25-255 CLAMPEX -Selection Shaft diameter = d 0
More informationFreewheel Clutches. Backstops Overrunning Clutches Indexing Freewheels. North American Edition 2015/2016
Clutches Backstops Overrunning Clutches Indexing s North American Edition 2015/2016 RINGSPANN Registered trademark of RINGSPANN GmbH, Bad Homburg Table of Contents Technology Introduction Page Introduction
More informationStandard with cone bushing. Backlash-free Safety Clutch
EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC
More informationMULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings
MULTI CROSS RILLO Highly flexible tyre coupling with taper bushings Maschinenfabrik Dipl.-Ing. Herwarth Reich GmbH Vierhausstr. 53 D-44807 Bochum P.O. Box 10 20 66 D-44720 Bochum Tel.: +49 / (0)234 / 959
More informationLocking Assemblies Shrink Discs Rigid Couplings.
M I N I Locking Assemblies Shrink Discs Rigid Couplings www.mav.it our company We are an Italian company world renowned for our creativity and ethics. Established in 1989 we have rapidly built a reputation
More informationSIT-LOCK self locking elements
self locking elements Advantages of on the shaft-hub connection compared with traditional systems Easy assembly and disassembly Both actions take place by locking and unlocking the clamping screws with
More informationHighly Flexible Couplings ELPEX Series
Siemens AG 2015 Highly Flexible Couplings ELPEX Series /2 Overview /2 Benefits /2 Application /2 Design /4 Configuration /5 Technical data /6 Types ENG/ENGS /6 Selection and ordering data /7 Types EFG/EFGS
More informationLIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm
LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison
More informationClutch Couplings FW/FWW. Overrunning Ball Bearing Supported, Sprag Clutch Couplings. FW Series. FWW Series. Typical Applications
s Overrunning Ball Bearing Supported, Sprag s Series For in-line shaft applications Outer race overrunning intermediate speed Inner race overrunning high speed clutch couplings are comprised of an FSO
More informationTORQLIGHT SAFETY COUPLINGS
LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction
More information(d) Bore Size Check from Dimensions table (page 112) that chosen flanges can accommodate required bores.
Fenaflex Couplings The Fenaflex coupling is a highly flexible, torsionally elastic coupling offering versatility to designers and engineers with a choice of flange combinations to suit most applications.
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationTorsionally Stiff Steel Lamina Couplings. innovative quality products. optimal cost-performance ratio. certified according to DIN ISO 9001
RGFLEX Torsionally Stiff Steel Lamina Couplings features: innovative quality products large-scale service optimal cost-performance ratio certified according to DN SO 0 worldwide net of distribution www.ktr.com
More informationSPIDERFLEX SPIDERJAW/WRAP PINFLEX CROWNPIN TYREFLEX DISCFLEX CHAINFLEX RBI GEARFLEX HYDRASTART FREEWHEELS. Industrial Couplings & Freewheel Clutches
SPIDERFLEX SPIDERJAW/WRAP PINFLEX CROWNPIN TYREFLEX DISCFLEX CHAINFLEX RBI GEARFLEX HYDRASTART FREEWHEELS Industrial Couplings & Freewheel Clutches Couplings Crownpin Heavy duty pin and buffer 249 kn.m
More informationGEAR-COUPLINGS. Series LX GLX S-NX
GEAR-COUPLINGS Series LX GLX S-NX CONTENTS Application 3 Quality and production 3 Design and characteristics 3 selection 4-5 Key connections 6 Shrink-fit connections 7 Standard design with one-piece housing
More informationSelection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
More informationSibre All Steel Couplings
Overview Coupling is device to transmit torque from driving side to driven side and also has function of compensation of axial,radial,angular misalignment which generated by manufacturing, installation
More informationVoith Turbo. Voith Disc-Flex MR Coupling
Voith Turbo Voith Disc-lex MR Coupling Torsionally rigid and backlash free drive couplings C - connecter bolts - driver hub - flex pack X - spacer - flex pack - driven hub C - connect bolts Exploded view
More informationPower Transmission. Installation and Operating Instructions for Internal Freewheels ZZ, ZZ...2RS, ZZ...P2RS, ZZ...P and ZZ...PP. E 08.
Power Transmission Installation and Operating Instructions for Internal Freewheels ZZ, ZZ...2RS, ZZ...P2RS, ZZ...P and ZZ...PP Schaberweg 30-34 61348 Bad Homburg Germany Telephone +49 6172 275-0 Telefax
More informationEXAMPLES GEARS. page 1
(EXAMPLES GEARS) EXAMPLES GEARS Example 1: Shilds p. 76 A 20 full depth spur pinion is to trans mit 1.25 kw at 850 rpm. The pinion has 18 teeth. Determine the Lewis bending stress if the module is 2 and
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE
More informationSolutions for power transmission. MAV-standardisarja.
Solutions for power transmission MAV-standardisarja www.konaflex.fi L O C K I N G A S S E M B L I E S Shrink disc Mini Series Rigid Couplings www.mav.it our company We are an Italian company world renowned
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More informationComparison Chart. extremely difficult. Finally, separated components can rarely be re-used.
JAN 2014 Traditional Connections Why Go Keyless Keyed Bushing Systems Both QD and Taper-Lock bushing and weld-on hub systems are popular component mounting technologies. Yet both are ultimately keyed connections
More informationPower Transmission. Installation and Operating Instructions for Integrated Freewheels FXRV and FXRT. E e.
Power Transmission Installation and Operating Instructions for Schaberweg 30-34 Telephone +49 6172 275-0 61348 Bad Homburg Telefax +49 6172 275-275 Germany www.ringspann.com mailbox@ringspann.com Issue:
More informationTORQUE LIMITER SERIES 200
TORQUE LIMITER SERIES 200 Quality and Autogard are synonymous with overload protection. The company's reputation for high quality products is derived from over 40 years of design innovation and production.
More informationSeries 54 and S54 Resilient Couplings
Series 54 and S54 Resilient s Bibby Transmissions Resilient s Bibby are the world originator of the resilient grid type shaft coupling, which is universally accepted by engineers to be one of the most
More informationIn-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide
In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide External Clamping devices Overview 3073 Mini-Range For very low torque transmission Very small profile
More informationCrossflex Disc Couplings
Crossflex Disc flexible shaft couplings provide reliable and accurate transmission of mechanical power for applications requiring low maintenance and no lubrication. The couplings are particularly suited
More informationKTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
More informationCLASSIFICATION OF ROLLING-ELEMENT BEARINGS
CLASSIFICATION OF ROLLING-ELEMENT BEARINGS Ball bearings can operate at higher speed in comparison to roller bearings because they have lower friction. In particular, the balls have less viscous resistance
More informationCLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE
CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps
More informationIntegrated Freewheels FXM
Integrated s FXM New generation with 20% higher torques Features Integrated s FXM are sprag free - wheels without bearing support and with sprag lift-off X. The sprag lift-off X ensures a wear-free freewheeling
More informationRE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles
RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationLocking Assemblies & Locking Elements
US 12 2010 Locking Assemblies & Locking Elements Partner for performance www.ringfeder.com A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 1922 in Krefeld, Germany to fabricate
More informationTorsionally Rigid Disc Couplings
US 05 2016 Torsionally Rigid Disc Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission RINGFEDER POWER TRANSMISSION We say what we
More informationMarine Engineering Exam Resource Review of Couplings
1. What are rigid couplings used for? Used to join drive shafts together. True alignment and rigidity are required. Example Drive shafts and production lines, bridge cranes, solid shaft that needs to be
More informationShaft Mounted Speed Reducers
s Metric Range Features The Challenge SMSR stands tall amongst the crowd. Packed full of attention to detail, the Challenge SMSR delivers performance in the harshest of applications. Shaft mounted drives
More informationAccessories smart additions for efficiency and intelligent performance
smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.
More informationAxial-radial cylindrical roller bearings
Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller
More informationSHAFT MOUNTED HELICAL GEAR REDUCER
Shaft Mounted Helical Gear Assembly INTRODUCTION The VIGNESSH Shaft Mounted Helical Gear Units are the result of experience in design and production, taking advantage of the most recent relevent research
More informationTorque Limiter 320 Series Overview. Torque Limiter 320 Series
Torque Limiter 0 Series Overview Torque Limiter 0 Series Torque Limiter 0 Series For more than 80 years, Autogard products have led the industry in overload protection with high-quality products, design
More informationROTARY MOTION CONTROL
ROTARY MOTION ONTROL Technical Data Sheet Mechanical Torque Limiter The trend in industry is to design and incorporate more automation into production processes. Machines are becoming more accurate, requiring
More informationShaft Mounted Speed Reducer. Technical Catalogue
Shaft Mounted Speed Reducer Technical Catalogue Where others fit, We perform Contents The Challenge SMSR stands tall amongst the crowd. Packed full of attention to detail, the Challenge SMSR delivers performance
More informationCoupling description. Disc pack with bolts
Coupling description RADEX -N couplings are designed to transmit torque between drive and driven components via steel hubs and flexible metallic elements commonly known as discs. The combination of these
More informationJaw Couplings REK DQO
Jaw s REK DQO elastic for dynamic applications with radially mountable elastomer cushions 40-1 Features s up to 169 000 Nm Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive
More informationInstallation and Operational Instructions for ROBA -D Couplings Type 91_. _
Please read the Installation and Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to coupling failure, resulting in damage to other
More informationHighly Flexible Couplings ELPEX-S Series
Highly Flexible Couplings ELPEX-S Series /2 Overview /2 Benefits /2 Application /2 Design /4 Function /4 Configuration /6 Technical data /9 Type E /9 Selection and ordering data /10 Type ESD /10 Selection
More informationTORQUE LIMITER SERIES 320
TORQUE IMITER SERIES 320 AUTOGARD SERIES 320 TORQUE IMITER Quality and Autogard are synonymous with overload protection. The company s reputation for high quality products is derived from over 35 years
More informationSpecifications. Trantorque GT CALL FAX
GT Specifications The following pages contain engineering data and product specifications for GT. For CAD drawings of GT, please click on the part number to download the drawing. All drawings are in AutoCAD
More informationLocking Assemblies & Locking Elements
US 01 2016 Locking Assemblies & Locking Elements Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today s RINGFEDER POWER TRANSMISSION GMBH
More informationTORQUE LIMITER SERIES 600. Airjustor
TORQUE LIMITER SERIES 600 Airjustor Quality and Autogard are synonymous with overload protection. The Company's reputation for high quality products is derived from over 40 years of design, innovation
More informationRINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2
RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2 1 Ringfeder Corporation Catalog W-300-1 Shaft-Hub Locking Devices Ringfeder unique frictional, keyless
More informationFlexible Couplings RUPEX Series
Flexible Couplings RUPEX Series /2 Overview /2 Benefits /2 Application /2 Design /4 Function /4 Technical data /6 Type RWN hub material grey cast iron /6 Selection and ordering data / Type RWS hub material
More informationFreewheel Clutches MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO
ringspann CORPORATION 85 RINGSPANN Registered Trade Mark of RINGSPANN GmbH, Bad Homburg Introduction RINGSPANN GmbH has operated for over 60 years, specializing in industrial freewheel clutch technology.
More informationTECHNODRIVE-PTO Power take-off clutches with speed reducing gearboxes
TECHNODRIVE-PTO Power take-off clutches with speed reducing gearboxes Your drive is our strength. Your strength is our drive. Contents Page General technical description... 3 s and application examples...
More informationInstallation and Operational Instructions for EAS -Compact overload clutch Type 49_. 4._ Sizes 01 to 3
Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to clutch failure, resulting in damage to other parts. Contents
More informationFrictional Connections Catalogue
MMADE IN GERMANY Frictional Connections Catalogue ADE IN GERMANY Certified in accordance with DIN ISO 9001:2008 FRICTIONAL CONNECTIONS TECHNOLOGY THAT CONNECTS Dear business partner, STÜWE GmbH & Co. KG
More informationMönninghoff electromagnetic tooth clutches
Mönninghoff electromagnetic tooth clutches High torque without slip in compact size Angular synchronisation of input to output possible Torque limiting and other special tooth options readily available
More informationRINGFEDER Locking Assemblies. Catalogue. RfN For high torques & axial loads
RINGFEDER Locking Assemblies GB 03 04 Catalogue RfN 7014 For high torques & axial loads RINGFEDER Locking Assemblies RfN 7014 Please note that our guarantee refers to our products only. Because of the
More informationPK couplings. Product description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
More informationProduct description. PK couplings
Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment
More informationFull disengagement ROBUST AND COMPACT TORQUE LIMITERS. THE ULTIMATE COUPLING FROM 1, ,000 Nm.
ROBUST AND COMPACT Full disengagement TORQUE LIMITERS SERIES ST 1,000 160,000 Nm THE ULTIMATE COUPLING FROM 1,000 160,000 Nm Full disengagement SERIES ST TORQUE LIMITERS Areas of application for the ST
More informationThe controllableollable Torque Limiting Clutch for
The controllableollable Torque Limiting Clutch for Filling Machinery Printing Machinery Packaging Machinery Conveyors and Materials Handling Equipment pneumatic or electromagnetic clutch Controllable during
More informationSCHMIDT-KUPPLUNG GmbH
Schmidt-Kupplung SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung About us About us In the early 1960s Richard Schmidt developed of propulsion systems for rockets in a zero-gravity environment. Among the possible
More informationlea) shows a compression type. These couplings are used for
Mechanical Equipment - Course 230.1 SHAFT COUPLINGS Couplings Couplings are used to join two shafts provide some means of transmitting power source to a driven member. There are two tiona of couplings,
More informationContents. SKF Grid Couplings Selection... 34
SKF Couplings Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as a high-quality bearing manufacturer throughout
More informationOIL/AIR ACTUATED POWER TAKE OFF
HF OIL/AIR ACTUATED POWER TAKE OFF HF POWER TAKE OFF HFO - FOR SIDE LOAD APPLICATIONS Unique greased for life bearing design Eliminates the pilot bearing inside the engine flywheel Rotary union for high
More informationBEVEL GEAR UNITS ZZ-SERVOLINE
BEVEL GEAR UNITS ZZ-SERVOLINE ZZ-SERVOLINE GEARBOX DESIGN AND FUNCTIONAL FEATURES Gear Ratios i= 3:1 i= 4:1 i= 5:1 i= 6:1 i= 8:1 i= 10:1 i= 12:1 i= 15:1 Spiral Bevel Gear KLINGELNBERG tooth system Hypoid
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More informationBacklash-free safety couplings. Backlash-free safety couplings. Product information. Optimal safety has a name: Guaranteed by two systems:
;;Engaged ;;Engaged Backlash-free safety couplings Product information Optimal safety has a name: Backlash-free safety couplings Guaranteed by two systems: ;;;; Locking Locking element - cylinder roller
More informationFLENDER Standard Couplings
FLENDER Standard Couplings N-ARPEX FLENDER couplings Catalog MD 10.1 N Edition April 2017 Related catalogs ARPEX MD 10.2 High Performance Couplings Bucket Elevator Drives MD 20.2 E800-K5710-A121-A1-700
More informationFLENDER Standard Couplings
FLENDER Standard Couplings N-BIPEX FLENDER couplings Catalog MD 10.1 N Edition October 2016 Related catalogs ARPEX MD 10.2 High Performance Couplings Bucket Elevator Drives MD 20.2 E86060-K5710-A121-A1-7600
More informationheet: 1 of 22 Backlash-free, torsionally stiff and maintenance-free coupling Type with setscrew Type with clamping hubs Type KN (Taper hubs) Type M with setscrew Type M with clamping hubs Type PI 11-3379-883
More informationOIL/AIR ACTUATED POWER TAKE OFF
OIL/AIR ACTUATED POWER TAKE OFF POWER TAKE OFF O - FOR SIDE LOAD APPLICATIONS Unique greased for life bearing design Eliminate the pilot bearing inside the engine flywheel R - - Rotary union for high reliability
More informationSpecialty Couplings. Overview. Deltaflex Coupling Design Lovejoy offers maximum misalignment capacity with the Deltaflex coupling! SP-3.
Overview Deltaflex Coupling Design Lovejoy offers maximum misalignment capacity with the Deltaflex coupling! The Deltaflex coupling is the real solution to installation, misalignment, and performance problems.
More informationSITEX ST Couplings SITEX ST
STX ST Couplings STX ST Contents STX ST Couplings Page Description 97 Features 97 STX ST executions 98 ST type C 99 ST type CV 100 ST type CF A-B-C (AMA) 101 ST type CF D--F 102 Coupling selection 103
More informationHighly Flexible Couplings ELPEX-B Series
Siemens AG 2015 Highly Flexible Couplings ELPEX-B Series /2 Overview /2 Benefits /2 Application /2 Design / Technical data /5 Type EBWN /5 Selection and ordering data /6 Type EBWT /6 Selection and ordering
More informationBell-house Mounted Arrangement. Highly Flexible K Coupling
Bell-house Mounted Arrangement. Highly Flexible K Coupling K Couplings for bell-house mounted arrangements are the only coupling type providing a blind assembly connection. They are specially designed
More informationHighest Performance: Dyna Series
Highest Performance: Dyna Series GAM can. If you don t see exactly what you need, let us know. We can modify the Dyna Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationMaschinentechnik. Controlled dynamics. Centrifugal clutches
Maschinentechnik Controlled dynamics Centrifugal clutches Experts in our field since 1982. Strong clutches do not slip we are driven by centrifugal force! Amsbeck Maschinentechnik GmbH is a leading manufacturer
More informationGeneral Purpose Motion Control Couplings
General Purpose Motion Control s Sliding Disc (Oldham) Universal ateral (Uni-at) Backlash-free up to 10 8 turns Can tolerate large misalignments Slight damping characteristics Flex-free mechanical action
More informationSITEX ST Couplings SITEX ST
STX ST Couplings STX ST STX ST couplings Description STX ST couplings are fully manufactured in high quality steel. They are made of 1 or 2 geared hubs which are coupled with one sleeve through which the
More informationROBATIC ROBA -quick ROBA -takt. Reliable coupling and braking.
Reliable coupling and braking Equipment Technology Packaging Machinery Conveyors and Materials Handling Equipment Door drives Indexing tables ROBATIC ROBA -quick ROBA -takt www.mayr.de Electromagnetic
More informationPrecision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
More information1 Mounting V-belt drive (motor pulley, fly wheel, V-belts and guard)
Mounting V-belt drive (motor pulley, fly wheel, V-belts and guard) General safety instructions, requirements and procedures 1 Mounting V-belt drive (motor pulley, fly wheel, V-belts and guard) 1.1 General
More informationEflex and Powerpin Flexible Couplings
Eflex and Powerpin Flexible s Accepts parallel, angular and axial misalignment Torsionally flexible Simple assembly Wide range of standard designs No lubrication 80 or 90 shore hardness close fitting elements
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More information