CHECK VALVES. SERIES 700 Dual plate check valves // DN (2 48 ) // PN 10/16. // Waste water, sewage, thick and viscous liquids, water
|
|
|
- Pearl Berry
- 5 years ago
- Views:
Transcription
1 SERIES 700 Dual plate check valves // DN (2 48 ) // PN 10/16 // Waste water, sewage, thick and viscous liquids, water SERIES 700HP Dual plate check valves // DN (2 24 ) // PN 10/16/24 // Oil & Gas, waste water, potable water SERIES 800 Swing check valves // DN (2 12 ) // PN 10/16 // Water, heating systems, oils CHECK VALVES
2 SERIES 700 DUAL PLATE CHECK VALVES Compact valve Preferred vertical installation in pipeline Short face-to-face connection with good hydraulic performance Mounting between fl anges Low head loss Stainless steel spring to avoid fl uid hammer BASIC INFORMATION Range: DN: (2 48 ) PN: 10/16 bar Temperature range: -25 C to +125 C (depending on execution) Applications: Waste water Sewage Water treatment Potable water Thick and viscous liquids STANDARDS LEAK TEST: EN , CLASS A ISO 5208, CLASS A CONNECTION BETWEEN FLANGES: EN ISO 6708 EN ,2 MARKING: EN 19 FACE TO FACE: EN 558 WORKING STANDARD: EN Item Name Material 1 Body Ductile iron (GGG40) 2 Plate Stainless steel (CF8) 3 Stem Stainless steel (AISI 304) 4 Seat NBR (-10 C to +100 C) EPDM (-25 C to +125 C) 5 Spring Stainless steel (AISI 304) DN PN 10 PN 16 Weight L a b r mm inch D D (kg) ,6 28,8 1, / ,9 33 2, , ,1 4, ,8 65,7 6, ,6 42,6 78,6 9, ,4 104,4 15, , ,3 40, , ,8 197, / / ,7 217, ,3 179,5 244, , Dimensions mentioned in mm, weight in kg. 2 2
3 SERIES 700HP DUAL PLATE CHECK VALVES DN 50 DN 600 Operating pressure maximum 24 bar High performance dual plate check valve Long life and trouble-free operation More compact & Structurally sound design Light Weight thus easier handling and self supporting Same valve can be installed horizontally or vertically No external devices /attachments required BASIC INFORMATION Temperature range: -25 C to +125 C Applications: waste water sewage thick and viscous liquids water STANDARDS LEAK TEST: EN , CLASS A ISO 5208, CLASS A API 598, TAB.5 FACE TO FACE: API 594 MARKING: EN19 For tightness rate A, please consult with the manufacturer. CONNECTION BETWEEN FLANGES: ASME B16.5 WORKING STANDARD: ASME B16.34 Pin retaining plugs fi tted with graphite gaskets for riresafe and leak free seal. Spring loading on plates assits valve closing ensure tight seal and minimaze slamming. Dual plate design minimazed valve cracking pressure and reduced valve pressure drop. Dual plate design minimazed valve cracking pressure and reduced valve pressure drop. 3 3
4 SERIES 700HP DUAL PLATE CHECK VALVES DRAWING & MATERIALS Item Name Materials B A 1 1 Body ASTM B148 C Disc ASTM B148 C Spring Inconel X750 4 Bearing ASTM B148 C Shaft Monel Seat Iintegral 3 A E 4 5 A 6 DIMENSIONS mm DN inch A B E Weight (kg) , ½ , PRODUCT QUALITY AND CONTROL ABO production facilities are certifi ed in accordance with ISO 9001 quality system Test procedures are established according to: EN , ISO 5208, API 598 All ABO valves pass pressure tests to 110% of rated pressure to ensure bubble tight shutoff Working pressure for sealing tested 1.5 times, working pressure for body shell strength tested 5 times Material Traceability Rule Certifi cation is provided for all supplied valves as per customer s request Positive Material Identifi cation All materials are subjected to PMI testing in order to verify Material Traceability Certifi cate Certificates e.g.: EC certifi cate complete list of certifi cates can be found on 4 4
5 SERIES 800 SWING CHECK VALVES Easy structure and mounting Direct installation between DIN flanges Short construction length Low weight BASIC INFORMATION Range: DN: (2 12 ) PN: 10/16 bar Temperature range: -25 C to +125 C (depending on execution) Applications: Water treatment Heating systems Oils STANDARDS LEAK TEST: EN , CLASS A ISO 5208, CLASS A CONNECTION BETWEEN FLANGES: EN ,2 EN ISO 6708 MARKING: EN 19 WORKING STANDARD: EN Item Name Material 1 Body Ductile iron (GGG40) 2 Disc Stainless steel (CF8) 3 Seat 1 NBR: marking 814 (-10 C to +100 C) 2 EPDM: marking 824 (-25 C to +125 C) Special materials on request (Viton, Silicone) 4 Holder Stainless steel (CF8) 5 Bolt Stainless steel (AISI 304) 6 Flange sealing Elastomer F DIMENSIONS mm DN inch A C D E F H Weight (kg) , / , , , , , ,5 Dimensions mentioned in mm, weight in kg. 5 5
6 CERTIFICATES Smolensk (RUS) Dnipropetrovsk (UKR) Olomouc (CZE) Shanghai (CHN) Bánská Bystrica (SVK) Istanbul (TUR) Manama (BHR) Singapore (SGP) Abu Dhabi (UAE) Campinas (BRA) All statements, technical information in this brochure are tentative and for general use only and do not constitute a recommendation or guarantee for any specific service or application requirement. Consult ABO representative or factory for specific requirements and material selection for your intended application. The right to change or modify product design or product without prior notice is reserved. Binding specification will be provided in each offer. ABO valve accepts no liability for damages caused by bad interpretation or use of the information included in this brochure Data subject to change. Company HQ Czech Republic: ABO valve, s.r.o. Dalimilova 285/54, Olomouc Tel.: export@abovalve.com USA: ABO Controls, LLC Houston, Texas Tel.: +1 (281) salesusa@abovalve.com Singapore: ABO Valve Pte. Ltd. Singapore Tel.: lsw@abovalve.com Slovakia: ABO Slovakia s.r.o. Banská Bystrica Tel.: aboslovakia@aboslovakia.sk Bahrain: ABO Middle East Manama Tel.: jimmichen@abovalve.com United Arab Emirates: ABO UAE Abu Dhabi Tel.: bharti@abovalve.com Germany: ABO Armaturen GmbH Mönchengladbach Tel.: salesde@abovalve.com Russia: ABO ARMATURA LLC Smolensk Tel.: +7(4812) aboarmatura@yandex.ru Brazil: ABO do Brasil Válvulas Industriais Eireli Valinhos export@abovalve.com Ukraine: ABO Ukraine LLC Dnipro Tel.: a.marushchak@abovalve.com.ua Turkey: ABO Armaturen LTD STI Istanbul Tel.: m.sahin@abovalve.com China: ABO Flow Control Shanghai Tel.: wen@abovalve.com India: ABO Controls Pvt. Ltd. Mumbai Tel.: dsouza@abovalve.com
CHECK VALVES GRIP THAT HOLDS. SERIES 700 Dual plate check valves // DN (2-48 ) // PN 10, 16
GRIP THAT HOLDS SERIES 700 Dual plate check valves // DN 50-1400 (2-48 ) // PN 10, 16 // Waste water, sewage, thick and viscous liquids, water SERIES 700HP Dual plate check valves // DN 50-600 (2-24 )
BALL VALVES BALL VALVES DN PN 63, 40
BALL VALVES DN 8 100 PN 63, 40 Applications: chemical and petrochemical industries, water treatment, power plants, paper industry, refineries, oil & gas, shipbuilding, pharmacy, food & beverages BALL VALVES
DOUBLE OFFSET FLANGED BUTTERFLY VALVES GRIP THAT HOLDS
GRIP THAT HOLDS SERIES 2E-3 // PN 10/16/25/40 // DN 150-3000 (6 118 ) // Hydraulic equipment // Industrial piping // Sanitary installations DOUBLE OFFSET FLANGED BUTTERFLY VALVES GENERAL INFORMATION GENERAL
SERIES 94 PNEUMATIC ACTUATORS
PNEUMATIC ACTUATORS SERIES 94 Double Acting / Single Acting Torque up to 13024 Nm Supply Pressure ranging from 2 to 8 bar SERIES 94 PNEUMATIC ACTUATORS WWW.ABOVALVE.COM GENERAL INFORMATION INTRODUCTION
PTFE LINED HIGH PERFORMANCE BUTTERFLY VALVES
GRIP THAT HOLDS SERIES 500 // PN 6/10/16/Class 150 // 50-250 (2-10 ) // Chemical industry // Aggressive media // Acids PTFE LINED HIGH PERFORMANCE BUTTERFLY VALVES WWW.ABOVALVE.COM GENERAL INFORMATION
RESILIENT SEATED BUTTERFLY VALVES
GRIP THAT HOLDS SERIES 900 // PN 6/10/16/Class 150 // NPS 1 ¼ - 64 // Industrial applications // Water, chemicals, gas // Oil & gas, air RESILIENT SEATED BUTTERFLY VALVES WWW.ABOVALVE.COM GENERAL INFORMATION
RESILIENT SEATED BUTTERFLY VALVES
GRIP THAT HOLDS SERIES 900 // PN 6/10/16/Class 150 // DN 32-1600 (1 ¼ - 64 ) // Industrial applications // Water, chemicals, gas // Oil & gas, air RESILIENT SEATED BUTTERFLY VALVES WWW.ABOVALVE.COM GENERAL
RESILIENT SEATED BUTTERFLY VALVES
SERIES 900 Class 150 // PN 6/10/16 NPS 1¼ 64 (DN 32 1600) Industrial applications RESILIENT SEATED BUTTERFLY VALVES WWW.ABOCONTROLS.COM GENERAL INFORMATION INTRODUCTION TO SERIES 900 ABO Series 900 are
RESILIENT SEATED BUTTERFLY VALVES
SERIES 900 PN 6/10/16 // Class 150 DN 32 1600 (NPS 1¼ 64) Industrial applications Water, chemicals Oil & gas, air RESILIENT SEATED BUTTERFLY VALVES WWW.ABOVALVE.COM GENERAL INFORMATION INTRODUCTION TO
SERIES 900 // PN 6/10/16/Class 150 // DN (1 ¼ - 64 ) // Industrial applications // Water, chemicals, gas // Oil & gas, air
BsOlute flow control SERIES 900 // PN 6/10/16/Class 150 // DN 32-1600 (1 ¼ - 64 ) // Industrial applications // Water, chemicals, gas // Oil & gas, air INTERFLNGES BUTTERFLY VLVES GENERL INFORMTION GENERL
ABsOlute flow control. SERIES 3E // DN (6-16 ) // Oil & Gas // Power Generation // Petrochemistry
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
Masoneilan* Series Eccentric Rotary Control Valve with PFA Liner
GE Oil & Gas Technical Specifications 08/2016 Masoneilan* 31000 Series Eccentric Rotary Control Valve with PFA Liner GE Data Classification : Public 2 GE Oil & Gas 2016 General Electric Company. All rights
Two-Way Metal Seated Ball Valve Type 16-R
Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
Masoneilan* Series Eccentric Rotary Control Valve with PFA Liner
Technical Specifications 10/2017 Masoneilan* 31000 Series Eccentric Rotary Control Valve with PFA Liner BHGE Data Classification : Public Contents Features...3 Numbering System...4 General Data...5 Connections...6
Two-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
Two-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
Instrumentation & Piping Products Monoflange & up to 2" Full Bore DBB Valves
Instrumentation & Piping Products Monoflange & up to 2" Full ore D Valves (Up to and including 15,000 psi / 1035 bar) Innovative and Reliable Valve Solutions Monoflange Ordering Information NV Order Code
Dual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
Knife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
Wafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
BUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
Eco-Saf System. Type ECR Reverse Buckling Compression Loaded Disk
Catalog # 77-4012 Catalog # 77-4012 Eco-Saf System Type ECR Reverse Buckling Compression Loaded Disk ECR reverse buckling disk EC-7RS safety head BSBsystems.com BSB.ie Visit our website for the most complete,
Swing Check Valves - Series 41
Tender Text Data Sheets Swing Check Valves - Series 41 The swing check valves are typically installed after a pump unit in order to prevent the water from flowing back through the pump, when it stops.
FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 600 VERSION
FLANGED FULL BORE BALL VALVE, SERIES MBV, ANSI CLASS 6 VERSION 1 MBV 27 Issue 12/98 Applications Chemical and petrochemical plants. Oil and gas production. Hydrocarbons. Liquids. Water. Power plants. Suitable
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
Multiway Ball Valve with Vertical In-/Outlet Metal Seated. Type 24-M. Approvals
Multiway Ball Valve with Vertical In-/Outlet Metal Seated Type 24-M Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe
Three-Way Metal Seated Ball Valve Type 21-M
Three-Way Metal Seated Ball Valve Type 21-M Design Characteristics Split body Trunnion mounted ball with - or T-port and integral stem ive loaded stem packing Spring loaded seat system Fire Safe design
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Bulletin: Floating Ball Valve. Tartarini Floating Ball Valve. Introduction. Features and Benefits
Tartarini Floating Ball Valve Bulletin: Floating Ball Valve May 2011 Figure 1. Tartarini Floating Ball Valve Introduction Tartarini Floating Ball Valve is a general-purpose valve. It is used for long range
METAL SEATED NELDISC BUTTERFLY VALVES, SERIES L12
METAL SEATED NELDISC BUTTERFLY ALES, SERIES L12 2 L12 20 Issue 4/99 SIZES AND PRESSURE RATINGS Size range DN 80-600, 3" - 24". Pressure ratings PN 10, 16, 25 and ANSI 150. FEATURES Third-generation, metal-to-metal
Butterfly valves. Introduction. Made of ductile cast iron
Made of ductile cast iron Introduction The portfolio of valves supplied by Keulahütte GmbH in Krauschwitz is rounded off by butterfly valves and check valves, which have been designed according to international
Masoneilan* Series Direct-Operated, Pressure Reducing Regulator
GE Oil & Gas Technical Specifications 03/2016 Masoneilan* 171-172 Series Direct-Operated, Pressure Reducing Regulator GE Data Classification : Public ing System 1st 2nd 3rd 1st 2nd 3rd 4th Option 1 7 X
TYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAP00000K3 Revision No: 1 This is to certify: That the Check Valve with type designation(s) 05414, 05417, 05419, 05714, 05717, 05719 Issued to Herose GmbH Armaturen
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
Titan Check Valves. Call. Fax. . Visit. Titan Flow Control. Your Pipeline to the Future
Your Pipeline to the Future TITAN 290 Corporate Drive Lumberton, NC 28358 Titan Check Valves, Inc. is a high quality manufacturer of check valves. With a dedication to great customer service, cutting edge
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
BUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
EXTRACTION CHECK VALVES
EXTRACTION CHECK VALVES COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual production
RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
Bonded Liner Butterfly Valve Double Flanged Type Series 150
Year : Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Design Technical Data Description : GV
High pressure valves. Inspired By Challenge
Inspired By Challenge Floating Valves High pressure General Series 7 Series 8 Series Introduction Ordering code system The Habonim high pressure valve series is based on a floating ball valve technology,
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
type 122a three-way Switching Valve
Instruction Manual Form 2279 Type 122A January 2016 type 122a three-way Switching Valve! WarnIng Failure to follow these instructions or to properly install and maintain this equipment could result in
JAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES
JAMESBURY EASYFLOW JT SERIES ANGLE STEM TANK BOTTOM VALVES JT series angle stem tank bottom valves provide a compact assembly with additional space for actuator clearance on insulated vessels. Large port
Operating Instructions
Operating Instructions For ABO Butterfly Valves, Series 3 E DN150-400 1. Introduction 2. Safety Instructions 3. Valve Model 4. Transportation and Storage 5. Installation into Piping 6. Pipe Pressure Test
Grooved Butterfly Valves
Grooved Butterfly Valves Design Rating: PN10, PN16 Design: UNE EN 539 Grooving dimensions: ANSI/ AWWA C 606 97 Face to face: MSS SP 67 Piping assembling: ANSI B3610, ISO 4200, DIN 2448, BS 1387, BS 3600
AVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
Product data sheet Wouter Witzel - EVFSGD Valves Rubber Lined - Centric EVFS PDS H
DESIGN Body Double Flanged type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series 13
BUTTERFLY VALVES, BFV TYPE
BUTTERFLY VALVES, BFV TYPE In 94, our journey into the business of repairing valves and industrial instrumentation began. That journey has led us to represent and service well known American brands and
Safety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
Tilting-disc Check Valves Short Body
Tilting-disc Check Valves Short Body Tilting-disc Check Valves, Short Body to DIN 3202 Series F4 for liquids and gases, PN 10 - PN 40, DN 150 - DN 2000 Short Body Tilting-disc Check Valves More than 40
PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
BAF BALL VALVES CATALOGUE
BAF BALL VALVES CATALOGUE for best invalvement 1 BAF BALL VALVES CATALOGUE Index About BAF Valves 3 Certificates 4 BAF Companies 5 Features 6 Applications 6 BAF Floating Ball Valves 7 Part list 8 Pressure
TECHNICAL BULLETIN. Segmented V-port Ball Valves. Experience In Motion FCD VLENTB
TECHNICAL BULLETIN Valtek ShearStream SB Control Valves Segmented V-port Ball Valves FCD VLENTB4152-01 07.09 Experience In Motion Primary characteristics ShearStream SB is a ball sector valve with metal-to-metal
Blohm + Voss Oil Tools Circular Buttons, Inserts and Dies Catalog
Blohm + Voss Oil Tools Circular Buttons, Inserts and Dies Catalog A company of ThyssenKrupp Marine Systems Blohm + Voss Repair Blohm + Voss Oil Tools General Information Brochure Contents INSERTS: DIMENSIONS...
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
Type / Material code Body* Disc Stem Lining**
Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.
Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 12
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-28 issue 12 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
ISO 9001 : Dual Plate Wafer Check Valves. API 594 Design API 598 Tested. Maximizing the Flow
ISO 9001 : 2008 Dual Plate Wafer Check Valves API 594 Design API 598 Tested Maximizing the Flow Meets API/ANSI/ASME Specifications Quick Delivery Dual Plate Wafer Check Valves The Industry Standard Dual
FERGO Armaturen GmbH Company presentation copyright by FERGO Armaturen GmbH
FERGO Armaturen GmbH Company presentation 2018 History 2004: Foundation of FERGO Ltd. with focus on knife gate valves in various executions for sewage, paper and bulk industries 2006: Transformation into
Instrumentation Products. Mini Valves and Rupture Disc Holders
Instrumentation Products Mini Valves and Rupture Disc Holders General Features I Mini Valves and Rupture Disc Holders Introduction Rugged Design for long term performance in the most demanding environmental
Stafsjö s ATEX solutions for category 1 D (Zone 20)
Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D
Masoneilan* 215X1 Series Control Valve
GE Oil & Gas Technical Specifications 05/2013 Masoneilan* 215X1 Series Control Valve UOP Lock Hopper Over Travel Control Valves Table of Contents Features...3 General Data...4 Numbering System...5 Temperature
Double Block & Bleed Pipeline Ball Valves Taurus Series
Double Block & Bleed Pipeline Ball Valves Taurus Series General Features Features Designed in accordance with Industry standards i.e. ASME B16.34, ASME B31.3, ASME B16.5, API 6D / ISO 14313 Full Bore Meets
Wafer, Lug and Double Flanged Type
Document : PG0 :1 Product Group 0 Wafer, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 : PG0 Product Group 0 Description Product Group 0 Butterfly Valves Triple eccentric metal seated
V5422L / V5422E ACTUATED BUTTERFLY VALVES. FEATURES With factory-mounted electric actuator. SPECIFICATIONS Valves
V5422L / V5422E ACTUATED BUTTERFLY VALVES FEATURES With factory-mounted electric actuator SPECIFICATION DATA Centric butterfly valve with elastomer liner Wide DN range (DN250 through DN600) For heating
BIANCA - Butterfly valve DN Description. Product features
Description Centric butterfly valve plastomer lined for On/off and control service for aggressive and corrosive fluids and high purity application Product features Body construction B1 Wafer DN 32-600
TECHNICAL BULLETIN. Valdisk TX3 Triple Offset Butterfly Control Valve. Experience In Motion FCD VLENTB A4 1/16
TECHNICAL BULLETIN Valdisk TX3 Triple Offset Butterfly Control Valve FCD VLENTB0061-00-A4 1/16 Experience In Motion Contents Triple Offset Butterfly Valve 3 Product Specifications 3 About Triple Offset
Instrumentation Manifolds Traditional C13WT series. For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters
Instrumentation Manifolds Traditional C13WT series For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters Introduction About Yokogawa and WIKA About the catalogue Yokogawa and WIKA have
Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300 Ø P. N h. 4x900=360. n x Øs Ø 5 Ø P Ø R Ø T. n x ØS BALL VALVES ØP ØR ØT
J H Ø T Ø R Ø 5 L2 DN-3 (12 ) to DN-4 (16 Class-1 & 3 DN-1 (6 ) to DN-3 ØI X B Y L Ø P M n x Øs B N h C 4x9=36 J Ø 5 Ø P I n x ØS ØP ØR ØT 1 J B C R3 BALL VALVES L M Ø T Ø R n x Øs I Ø5 5 R1 ØP Ø P L ISO
Compac-Noz Valves High Performance Non-Slam Check Valves
Compac-Noz Valves High Performance Non-Slam Check Valves Compac-Noz Non-Slam Check Valves Scope of Line and Features Sizes 12" - 60" ASME B16.34 & API 6D, pressure classes 150-4500 API 6A pressure classes
RESILIENT SEATED GATE VALVE FAF 6200
PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection
M1/M2 POCKET FEEDER. Compact design DESIGN FEATURES. Special ball and seat design. Large ball pocket capacity. Automatic cycling
M1/M2 POCKET FEEDER The latest member in the M1/M2 ball valve series is the Pocket Feeder, for separator service. It is designed for automatic removal of sand and other fine debris from process. Typical
brands you trust. Noz-Chek - High Performance Nozzle-Type Non-Slam Check Valve Crane ChemPharma & Energy
brands you trust. Noz-Chek - High Performance Nozzle-Type Non-Slam Check Valve Crane ChemPharma & Energy Non-Slam Check Valves Scope of Line Sizes 2" 84" ASME B16.34 & API 6D, pressure classes 150 4500
FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS
FLANGED FULL BORE MBV BALL VALVE, SERIES M1 FOR PN RATINGS 1 M1 20 Issue 4/99 DESIGN FEATURES Size range DN... 300. For larger sizes, DN 350-400, select series MP, MA, or MT. PN 10, 16, and 40. Pressure
Long Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Long) Series 130. Document : S130 Revision : 3 Year : 2014
Year : Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description
SECTION MISCELLANEOUS VALVES
SECTION 05140 - PART 1 - GENERAL 1.1 WORK OF THIS SECTION A. The WORK of this Section includes providing miscellaneous valves as indicated, complete and operable, including accessories and operators. 1.2
SERIES 2200 Replaceable Seat Butterfly Valves
SERIES 2200 Replaceable Seat Butterfly Valves Publication S2200-101 Issue 04/18 Rev. A Design Characteristics Multiple Seat Options VSI offers various seat options including EPDM, NBR, Viton, and others
Mono Flanged Type Long Face to Face
Year : Mono Flanged Type Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical
SEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5
SEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5 PHÖNIX Armaturen-Werke Bregel GmbH P +49 (5693) 988-0 F +49 (5693) 988-140 info@phoenix-armaturen.de www.phoenix-armaturen.de BELLOWS SEALED
Cast Steel Bolted Cover Swing Check Valves Sizes: 2 thru 24 Pressure Class: 150 thru 1500
Cast Steel olted Cover Swing Check Valves s: 2 thru 24 Pressure Class: 150 thru 1500 Manufactured by Newmans 33 Newco Cast Carbon Steel olted onnet Valves Typical Newco Cast Steel olted Cover Swing Check
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
Series 26d Ball Valve
Stainless Steel Series 26d Ball Valve Application Tight-closing ball valve made of stainless steel for corrosive media, especially to meet high process requirements in chemical plants: Nominal sizes DN
Short Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Short) Series 120. Document : S120 Revision : 2 Year : 2014
Year : Short Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description
Non Return Valves.
Non Return Valves Table of contents Product information Type 4010 & 4010HD Type 4010, with lever and weight Type 4010 HD, with lever and weight + hydraulic damper Type 4020, slanted seat with/without damper
Válvulas AG1-BD BUTTERFLY VALVE. From 1970 close to our clients
Válvulas AG1-BD BUTTERFLY VALVE From 1970 close to our clients Technical datasheet Butterfly valve.. Edition 2.5 06/2017 ANGODOS Since 1970 ANGODOS has been technological leader in valves industry, manufacturing
Instrumentation Products. KM Series I Metal Seated Ball Valve
Instrumentation Products KM Series I Metal Seated Ball Valve KM Series I Metal Seated Ball Valve Ball Valve meets toughest requirements Extreme operating conditions with temperatures up to 450 C and pressures
DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
BULLETIN 46.00-2B OCTOBER 2015 DeZURIK BOS-US 2-20" (50-500mm) UNINTERRUPTED SEAT RESILIENT SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS - Materials of Construction - Specifications - Ordering - Dimensions
NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS
NELES BO SERIES BUTTERFLY VALVE FOR RECOVERY OF OXYGEN IN VACUUM PRESSURE SWING ADSORPTION (VPSA) PLANTS Metso's Neles BO series butterfly valve is designed for use in vacuum Pressure Swing Adsorption
Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 13
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2016-06-03 issue 13 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
FLANGED REDUCED BORE BALL VALVE, SERIES MBV
FLANGED REDUCED BORE BALL VALVE, SERIES MBV 1 MBV 26 Issue 12/98 DESIGN FEATURES Size range 2" 8". ANSI Class 15 and. Pressure classes Tightness Separate ball and shaft assure low pressure tightness even
Instrumentation Products F Series Manifolds and Multi-Way Cocks
Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X
NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.
Keystone CompoSeal Resilient Seated Butterfly Valves Wafer style
Wafer style Resilient seated butterfly valves with valve body and disc in high engineered composite material providing excellent internal and external chemical resistance. Features General application
SERIES 2100 Resilient Seated Butterfly Valves
SERIES 2100 Resilient Seated Butterfly Valves Publication S2100-101 Issue 06/16 Rev. C Design Characteristics Applications Commercial Heating & Air Conditioning Waste Water & Water Treatment Sea Water