High pressure valves. Inspired By Challenge

Size: px
Start display at page:

Download "High pressure valves. Inspired By Challenge"

Transcription

1 Inspired By Challenge

2 Floating Valves High pressure General Series 7 Series 8 Series Introduction Ordering code system The Habonim high pressure valve series is based on a floating ball valve technology, specially built for endurance and reliability with a design pressure of up to ANSI Class 500 ( bar / 000 psi). As standard, the high pressure series is made from forged or rolled bar material. Consequently we are able to sculpture the valve to customer specific demands in a very short time. The result is a cost effective solution compared with trunnion mounted ball valve technology. The high pressure valve series delivers reliable performance in the most demanding applications in the oil & gas, offshore drilling platform, petrochemical and the power industries. The 8 series with size up to and including " (DN50) is capable of operation under full Class 500 differential pressure, providing smooth and trouble free functionality. For sizes ½" (DN5) and above the 8 series with hybrid seats can handle differential pressure of up to 55 bar (700 psi). The pressure containing parts are in compliance with ASME B., for wall thickness, the design successfully passed burst testing according to DNV rules, i.e. holding four times the pressure rating for 5 minutes. A one-size-up stem made of high tensile material complies with ASME B. and API D for drive train requirements provides sufficient safety factor during operation. A special hybrid seat design is comprised of a metal housing and polymer insert machined as a single unit. This provides higher metal seat stiffness and bubble tight shut-off (Rate A) combined with lower operating torque compared to any equivalent valve solution. The 7 series is a cost effective solution compared with the 8 series, The 7 series with size up to and including " (DN50) is capable of operation under full Class 500 differential pressure, providing smooth and trouble free functionality. For sizes ½" (DN5) and above the 7 series can handle differential pressure of up to 70 bar (05 psi). The series is part of the Habonim high pressure instrumentation line, a two-piece design, in sizes up to ½ (DN0). The series are designed for shutoff against full differential pressure of bar (000 psi). The series is DNV certified, having successfully passed burst testing as well as fire safe testing to API 07 and ISO 097. By default the valve is manually operated, automation is available upon request. Technical summary Size range /"-8" (DN8-DN00) Series in range 8 series ANSI B. class 500 (wall thickness), size ¼ -8 (DN8-DN00) 7 series ANSI B. class 500 (wall thickness), size ¼ - (DN8-DN50) ANSI B. class 500 (wall thickness), size ½ -8 (DN5-DN00) series Class 500, size ¼ -½ (DN8-DN0) Temperature range -0 C to +0 C (-7 F to +500 F) Materials Stainless Steel /L, Carbon Steel ASTM A50 LF, C.St A05 and more. End connections Threaded, welded, flanged Standards of compliance Factory certification ISO 900:05 Quality management system Valve design and tests ASME B. :0 API D / ISO :007 ISO79 :00 ANSI B.0.:0 EN 0-:00, ISO 7-:007, JIS B00:999 DIN 85:0 NACE MR-075:05 /ISO 55 -:05 NACE MR00/ISO 795:05 Valve design NPT - National Pipe Taper thread BSPT - British Standard Pipe Taper thread BSPP - British Standard Paralell Pipe Materials for use in HS-containing environments in oil and gas production Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments EN -:0, API 598:0 Testing of metallic valves - pressure tests, test procedures and acceptance criteria API 07:0, ISO 097:00 Testing of valves - fire type-testing requirements ISO 588-:05 Industrial valves - measurement, test and qualification procedures for fugitive emissions Certifications PED 0/8/EU Module H Pressure equipment directive ATEX 0//EU Equipment and protective systems intended for use in potentially explosive atmospheres (optional for actuated unit only) IEC 508-/:00 SIL/ Safety integrity level - functional safety of electrical/electronic/ programmable electronic safety-related systems (optional for actuated unit only) Documentation EN 00:00././. Metallic materials - types of inspection documents

3 General Series design features Stem Stem seals Seats End safety pin Body Body Two piece design - minimum leak paths Threaded body - end connection Robust high pressure design Full compliance with B. and API D Carbon steel valves are oxidized to MIL-DTL-9 standard or available in epoxy paint finish upon request Stainless steel and high alloy valves provided with natural finish Safety pin eliminates unintentional rotation of end connection Mirror polished Solid ball Pressure equalizing hole in the stem slot 7-PH high tensile ball for ¼ -¾ DN8-DN0 valves (standard) Stem seal ISO 588- certified High endurance up to hundreds of thousands of cycles Non-graphite fire safe certified stem seal Anti-abrasion mechanism Live loaded Seats and seals Adapted for high pressure seats Shore 90 hardness O-ring seals Rate A leakage tightness Variety of materials Operation The series are designed for shutoff against full differential pressure of bar (000 psi) Automation is available upon request Stem One pcs solid stem 7-PH high tensile valve stem (standard) Anti blowout proof design Anti-static device Fire-lip

4 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system 7 Series design features Stem Stem Seal Seals Seats Ends Ends Body Body Three-piece in-line design for easy repair Various types of end connections available Robust high pressure design Wall thickness compliant with B. Carbon steel valves are oxidized to MIL-DTL-9 standard or available in epoxy paint finish upon request Stainless steel and high alloy valves provided with natural finish Mirror polished Solid ball Pressure equalizing hole in the stem slot 7-PH high tensile ball for ¼ -¾ (DN8-DN0) valves (standard) Stem One piece solid stem 7-PH high tensile valve stem (standard) Anti blowout proof design Anti-static device Fire-lip Stem seal ISO 588- certified High endurance up to hundreds of thousands of cycles Non-graphite firesafe certified stem seal Anti-abrasion mechanism Live loaded Seats and seals Adapted for high pressure seats Shore 90 hardness O-ring seals Rate A leakage tightness Variety of materials Operation The 7 series, Size ¼ - (DN8-DN50) is designed for breakout to open under maximum differential pressure of class 500 Size ½ -8 (DN5-DN00) is designed for breakout to open under maximum differential pressure of 70 bar (05 psi)

5 General 8 Series design features Stem Stem Seal Body Seals Seat Seals Hybrid Seats Ends Body Standard design Two seals of the same material: PTFE, graphite, NBR, Viton Valve code example: 0 F8W-MWG/NPT G - for two graphite seals Body Three-piece in-line design for easy repair Various types of end connections available ISO 5 pad for standard instrumentation attachment Robust high pressure design Full compliance with B. and API D for class #500 (including bolts), wall thickness compliant for #500 Carbon steel valves are oxidized to MIL-DTL-9 standard or available in epoxy paint finish upon request Stainless steel and high alloy valves provided with natural finish Mirror polished Solid ball Pressure equalizing hole in the stem slot 7-PH high tensile ball for ¼ -¾ (DN8-DN0) valves (standard) Stem One-piece solid oversized stem to accommodate high torques 7-PH high tensile valve stem (standard) Blowout-proof design Anti-static device Fire-lip Optional design One body seal: PTFE, graphite, NBR, Viton Two O-ring seat seals: NBR Viton Valve code example: 0 F8W-MWG/NPT-UV G - for graphite body seal UB or UV suffix to the ordering code for NBR or Viton seat seals Stem seal ISO 588- certified High endurance up to hundreds of thousands of cycles Non-graphite firesafe certified stem seal Anti-abrasion mechanism Live loaded Seats and seals Hybrid seats for high pressure durability Double sealed body Shore 90 hardness for O-ring seals Optional second O-ring seal Rate A leakage tightness Variety of high rigidity polymers for insert materials Operation The 8 series, Size ¼ - (DN8-DN50) is designed for breakout to open under maximum differential pressure of class 500 Size ½ -8 (DN5-DN00) is designed for breakout to open under maximum differential pressure of class

6 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system Size - DN8-DN0 Class 500 X/W/ () Series Valve dimensions S D C H ø port B Y A Preparation for actuation P P ø W ¼ - ¾ without nut M - ½ with nut Stem flats show valve ball position N Thread Std. port Unit port A B C D H M N P Ø W S Y weight kg/lb DN8 mm /8" UNF / inch DN0 mm /8" UNF /8 inch DN5 mm /8" UNF / inch DN0 mm /8" UNF / inch DN5 mm /" UNF inch DN mm /" UNF / inch DN0 mm /" UNF / inch kv cv

7 Size - DN8-DN0 Class 500 X/W/ () Series Components & materials A 7a 9 8 8A Body S.St. A79 /L, C.St. A50 LF, C.St A05, B7 N0800 (Alloy 0), B N000 (Monel 00), B57 N00 (Alloy C), B57 N07 (Alloy C7), A79 S5 (5 SMO), A79 S80 (Duplex), A79 S750 (Super Duplex) End A79 /L, A50 LF, C.St A05, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 S.St for ½" and ¾" valves: A5 Gr.0 H50D 7-PH, S.St for " and up valves: A5 CF8M, A79 /L, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) Stem A5 Gr.0 H50D 7-PH, B N000, B57 N00, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) 5* Seat PVDF, DELRIN, PEEK, CF PEEK, PCTFE (KEL-F) * Body seal PTFE, Graphite, NBR, Viton 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () () Series is Habonim's standard valve design without the HermetiX stem seal construction () This material can only be used as part of non HermetiX design 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A58 0 8A Dowel Pin A79 L 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L 0A* Slide bearing TF Disc spring A9 7-7PH Stem nut A9 8M, EN50- A-80 Locking clip A7 0 Handle C.St. A9 G000 Zinc plate, S.St. A0 0 5 Serrated washer A0 0 Handle nut A9 8M, EN50- A-80 7 Sleeve PVC 0 Anti static spring A 0 Anti-static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with HermetiX stem seal. Does not supplied in /" and /" valves 7

8 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system Size - DN8-DN50 Class 500 7X/7W/7 () Series Valve dimensions S D C H ø port B A Preparation for actuation P P ø W F ¼ - ¾ without nut M - with nut Stem flats show valve ball position N thread F TxL Std. port Unit port A B C D Ø W H M N P S TxL F F weight kg/lb DN8 mm / UNF /" inch DN0 mm / UNF /8" inch DN5 mm / UNF /" inch DN0 mm / UNF /" inch DN5 mm / UNF " inch DN mm / UNF /" inch DN0 mm / UNF Mx8 /" inch DN50 mm / UNF Mx8 " inch kv cv 8

9 Size - DN8-DN50 Class 500 7X/7W/7 () Series Components & materials A 7a Body S.St. A79 /L, C.St. A50 LF, C.St A05, C.St A05, B7 N0800 (Alloy 0), B N000 (Monel 00), B57 N00 (Alloy C), B57 N07 (Alloy C7), A79 S5 (5 SMO), A79 S80 (Duplex), A79 S750 (Super Duplex) End A79 /L, A50 LF, C.St A05, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 S.St for /" and /" valves: A5 Gr.0 H50D 7-PH, S.St for " and up valves: A5 CF8M, A79 /L, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) Stem A5 Gr.0 H50D 7-PH, B N000, B57 N00, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) 5* Seat PVDF, DELRIN, PEEK, CF PEEK, PCTFE (KEL-F) * Body seal PTFE, Graphite, NBR, Viton () 7 Series is Habonim's standard valve design without the HermetiX stem seal construction. () This material can only be used as part of non HermetiX design. 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A58 0 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L 0A* Slide bearing TF Disc spring A9 7-7PH Stem nut A9 8M, EN50- A-80 Locking clip A7 0 Handle C.St. A9 G000 Zinc plate, S.St. A0 0 5 Serrated washer A0 0 Handle nut A9 8M, EN50- A-80 7 Sleeve PVC 8 Body bolts A9 B8M, EN50- A-80-0 Anti static spring A 0 Anti static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with HermetiX stem seal. Does not supplied in /" and /" valves 9

10 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system Size - 8 DN5-DN00 Class 500 7X/7W/7 () Series Valve dimensions S D C H ø port Preparation for actuation B A P ø W F Q Stem groove shows valve M ball position M N thread M N thread TxL F Special shape add WR to description) (when ordering the valve Standard shape Std. port Unit port A B C D Ø W H M M-DD N P Q S TxL F F Weight kg/lb DN5 mm M0x Mx / inch DN80 mm M0x inch UNS DN00 mm M0x inch UNS DN50 mm / Mx8 inch UNF DN00 mm M0x5 8 inch UN-A kv cv 0

11 Size - 8 DN5-DN00 Class 500 7X/7W/7 () Series Components & materials B 7 A 0 0A 7a A Body S.St. A79 /L, C.St. A50 LF, C.St A05, C.St A05, B7 N0800 (Alloy 0), B N000 (Monel 00), B57 N00 (Alloy C), B57 N07 (Alloy C7), A79 S5 (5 SMO), A79 S80 (Duplex), A79 S750 (Super Duplex) End A79 /L, A50 LF, C.St A05, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 S.St for /" and /" valves: A5 Gr.0 H50D 7-PH, S.St for " and up valves: A5 CF8M, A79 /L, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) Stem A5 Gr.0 H50D 7-PH, B N000, B57 N00, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) 5* Seat PVDF, DELRIN, PEEK, CF PEEK, PCTFE (KEL-F) * Body seal PTFE, Graphite, NBR, Viton A Support ring A79 /L, A50 LF, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 () 7 Series is Habonim's standard valve design without the HermetiX stem seal construction () This material can only be used as part of non HermetiX design 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A58 0 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L 0A* Slide bearing TF Stem mut A9 8M, EN50- A-80 Tab lock washer A0 0 Handle C.St. Zinc plate, A0 L A Stop plate C.St..00 Zinc plate, A0 0 B Wrench head Ductile Iron A5 Gr. 5-5-, A WCB, A5 CF8M Wrench bolt EN50- A-70/A-80, A9 Gr B8/B8M 7 Sleeve PVC 8 Body bolts A9 B8M, EN50- A Anti static spring A 0 Anti static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with HermetiX stem seal

12 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system Size - DN8-DN Class 500 8X/8W/8 () Series Valve dimensions S D C H ø port B A (Threaded) A (XBW, XSW) TxL thread F PCD Preparation for actuation P ¼ - ½ ø W M Stem flats show valve ball position N thread Std. port Unit port A THD A XBW/ XSW B C D Ø W H M N P S ISO PCD F TxL Weight Kv THD XBW Cv DN8 mm (F0) /8 UNF / inch DN0 mm (F0) /8 UNF /8 inch DN5 mm (F0) /8 UNF / inch DN0 mm / UNF (F0) / inch DN5 mm / UNF (F05) Mx8 inch DN mm / UNF (F05) Mx8 / inch

13 Size - DN8-DN Class 500 8X/8W/8 () Series Components & materials 7 5 5B 5, 5A 5C 0 0A 7a C 5, 5A 5B 8 8 Body S.St. A79 /L, C.St. A50 LF, C.St A05, C.St A05, B7 N0800 (Alloy 0), B N000 (Monel 00), B57 N00 (Alloy C), B57 N07 (Alloy C7), A79 S5 (5 SMO), A79 S80 (Duplex), A79 S750 (Super Duplex) End A79 /L, A50 LF, C.St A05, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 A5 Gr.0 H50D 7-PH, S.St A5 CF8M, A79 /L, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) Stem A5 Gr.0 H50D 7-PH, B N000, B57 N00, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) 5* Seat insert PVDF, DELRIN, PEEK, CF PEEK, PCTFE (KEL-F) 5A* Seat housing A79 /L, A50 LF, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 5B* Seat seal PTFE, Graphite, NBR, Viton 5C* Seat seal (optional) NBR, Viton * Body seal PTFE, Graphite, NBR, Viton () 8 Series is Habonim's standard valve design without the HermetiX stem seal construction () This material can only be used as part of non HermetiX design 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A58 0 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L 0A* Slide bearing TF Disc spring A9 7-7PH Stem nut A9 8M, EN50- A-80 Locking clip A7 0 Handle C.St. A9 G000 Zinc plate, S.St. A0 0 5 Serrated washer A0 0 Handle nut A9 8M, EN50- A-80 7 Sleeve PVC 8 Body bolts A9 B8M, EN50- A-80-0 Anti static spring A 0 Anti static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with HermetiX stem seal. Does not supplied in /" and /" valves

14 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system Size " - 8" DN0-DN00 Class 500 8X/8W/8 () Series Valve dimensions S D H C ø port B A (Threaded) A (XBW) Preparation for actuation P ø W Stem groove shows valve Q M ball position M N thread N thread M TxL thread F PCD DD Stem Square shape (std.) Std. port Unit port A THD A XBW/ XSW B C D Ø W H M N P Q S ISO PCD F TxL Weight Kv THD XBW Cv DN0 mm Full (F07) M0x.5 M8x0 / inch thread DN50 mm Full (F07) M0x.5 M8x0 inch thread DN5 mm / (F0) M0x / inch UNS-A DN80 mm / (F) Mx8 inch UNF-A DN00 mm 8.80 N/A / (F) Mx0 inch. N/A UNF-A DN50 mm.0 N/A " (F) M0x5 inch.7 N/A UN-A DN00 mm.0 N/A /" Mx5 8" inch 5.9 N/A UN-A

15 Size " - 8" DN0-DN00 Class 500 8X/8W/8 () Series Components & materials B 7 A 5B 5, 5A 5C 7a A 5C 5, 5A 5B 8 8 Body S.St. A79 /L, C.St. A50 LF, C.St A05, C.St A05, B7 N0800 (Alloy 0), B N000 (Monel 00), B57 N00 (Alloy C), B57 N07 (Alloy C7), A79 S5 (5 SMO), A79 S80 (Duplex), A79 S750 (Super Duplex) End A79 /L, A50 LF, C.St A05, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 S.St for /" and /" valves: A5 Gr.0 H50D 7-PH, S.St for " and up valves: A5 CF8M, A79 /L, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) Stem A5 Gr.0 H50D 7-PH, B N000, B57 N00, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) 5* Seat insert PVDF, DELRIN, PEEK, CF PEEK, PCTFE (KEL-F) 5A* Seat housing A79 /L, A50 LF, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 5B* Seat seal PTFE, Graphite, NBR, Viton 5C* Seat seal (optional) NBR, Viton () 8 Series is Habonim's standard valve design without the HermetiX stem seal construction () This material can only be used as part of non HermetiX design * Body seal PTFE, Graphite, NBR, Viton 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A58 0 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L 0A* Slide bearing TF Disc spring A9 7-7PH Stem nut A9 8M, EN50- A-80 Locking clip A7 0 Handle C.St. A9 G000 Zinc plate, S.St. A0 0 5 Serrated washer A0 0 Handle nut A9 8M, EN50- A-80 7 Sleeve PVC 8 Body bolts A9 B8M, EN50- A-80-0 Anti static spring A 0 Anti static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with HermetiX stem seal 5

16 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system Size " - " DN5-DN Class 500 8W/8 () Series: Flanged ANSI Raised Face (RF), Ring Type Joint (RTJ) Valve dimensions S H D C ø port B A Preparation for actuation TxL Thread F PCD P ø W ½ - ¾ M Stem flats show valve ball position N thread Std. port Unit port #500 RF #500 RF #500 RTJ #500 RTJ ISO B C D H M N P S PCD F TxL Weight Kv A W A W A W A W #500 #500 Cv DN5 mm (F0) /8 UNF / inch DN0 mm / UNF (F0) / inch DN5 mm / UNF (F05) Mx8 inch DN mm / UNF (F05) Mx8 / inch

17 Size " - " DN5-DN Class 500 8W/8 () Series: Flanged ANSI Raised Face (RF), Ring Type Joint (RTJ) Components & materials 7 5 5B 5, 5A 5C 0 7a , 5A 5C 5B 8 8 Body S.St. A79 /L, C.St. A50 LF, C.St A05, C.St A05, B7 N0800 (Alloy 0), B N000 (Monel 00), B57 N00 (Alloy C), B57 N07 (Alloy C7), A79 S5 (5 SMO), A79 S80 (Duplex), A79 S750 (Super Duplex) End A79 /L, A50 LF, C.St A05, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 S.St for /" and /" valves: A5 Gr.0 H50D 7-PH, S.St for " and up valves: A5 CF8M, A79 /L, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) Stem A5 Gr.0 H50D 7-PH, B N000, B57 N00, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) 5* Seat insert PVDF, DELRIN, PEEK, CF PEEK, PCTFE (KEL-F) 5A* Seat housing A79 /L, A50 LF, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 5B* Seat seal PTFE, Graphite, NBR, Viton 5C* Seat seal (optional) NBR, Viton () 8 Series is Habonim's standard valve design without the HermetiX stem seal construction () This material can only be used as part of non HermetiX design * Body seal PTFE, Graphite, NBR, Viton 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A58 0 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L 0A* Slide bearing TF Disc spring A9 7-7PH Stem nut A9 8M, EN50- A-80 Locking clip A7 0 Handle C.St. A9 G000 Zinc plate, S.St. A0 0 5 Serrated washer A0 0 Handle nut A9 8M, EN50- A-80 7 Sleeve PVC 8 Body bolts A9 B8M, EN50- A-80-0 Anti static spring A 0 Anti static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with HermetiX stem seal. Does not supplied in /" and /" valves 7

18 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system Size " - 8" DN0-DN00 Class 500 8W/8 () Series: Flanged ANSI Raised Face (RF), Ring Type Joint (RTJ) Valve dimensions S H D C ø port A Preparation for actuation P ø W Stem groove shows valve Q M ball position M Std. port Unit port N thread TxL Thread N thread F PCD DD Stem Square shape (std.) #500 RF #500 RF #500 RTJ #500 RTJ ISO Weight Kv B C D H M N P Q S F TxL A W A W A W A W PCD #500 #500 Cv DN0 mm Full (F07) M0x.5 M8x0 / inch thread DN50 mm Full 0.00 (F07) M0x.5 M8x0 inch thread DN5 mm / (F0) M0x / inch UNS-A DN80 mm / (F) Mx8 inch UNF-A DN00 mm / (F) Mx0 inch UNF-A DN50 mm " (F) M0x5 " inch UN-A DN00 mm " - / Mx5 8" Inch UN-A M 8

19 Size " - 8" DN0-DN00 Class 500 8W/8 () Series: Flanged ANSI Raised Face (RF), Ring Type Joint (RTJ) Components & materials B 7 0 0A 7a 9 A 8 5B 5, 5A 5C 8 7 5C 5, 5A 5B 8 Body S.St. A79 /L, C.St. A50 LF, C.St A05, C.St A05, B7 N0800 (Alloy 0), B N000 (Monel 00), B57 N00 (Alloy C), B57 N07 (Alloy C7), A79 S5 (5 SMO), A79 S80 (Duplex), A79 S750 (Super Duplex) End A79 /L, A50 LF, C.St A05, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 S.St for /" and /" valves: A5 Gr.0 H50D 7-PH, S.St for " and up valves: A5 CF8M, A79 /L, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) Stem A5 Gr.0 H50D 7-PH, B N000, B57 N00, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) 5* Seat insert PVDF, DELRIN, PEEK, CF PEEK, PCTFE (KEL-F) 5A* Seat housing A79 /L, A50 LF, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 5B* Seat seal PTFE, Graphite, NBR, Viton 5C* Seat seal (optional) NBR, Viton () 8 Series is Habonim's standard valve design without the HermetiX stem seal construction () This material can only be used as part of non HermetiX design * Body seal PTFE, Graphite, NBR, Viton 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A58 0 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L 0A* Slide bearing TF Stem mut A9 8M, EN50- A-80 Tab lock washer A0 0 Handle C.St. Zinc plate, A0 L A Stop plate C.St..00 Zinc plate, A0 0 B Wrench head Ductile Iron A5 Gr. 5-5-, A WCB, A5 CF8M Wrench bolt EN50- A-70/A-80, A9 Gr B8/B8M 7 Sleeve PVC 8 Body bolts A9 B8M, EN50- A Anti static spring A 0 Anti static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with HermetiX stem seal 9

20 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system Size " - " DN5-DN Class 500 8W/8 () Series: SAE J58 Flange Code (SAE000), Code (SAE 000) Valve dimensions S D C H K / K (optional) ø port V V B A Preparation for actuation P ½ - ¾ ø W M Stem flats show valve ball position TxL Thread F PCD N thread Std. Unit port port SAE000 A K K V V Pressure bar / psi SAE000 A K K V V Pressure bar / psi B C D W H M N P S Weight Kv ISO PCD F TxL SAE000 SAE000 Cv DN5 mm (F0) M M /8 UNF / inch DN0 mm M0.00 M0.00 7/ UNF.0 7.0(F0) / inch DN5 mm M0.00 M.00 9/ UNF (F05) Mx8 inch DN mm M0.50 M / UNF (F05) Mx8 / inch () Through hole upon request. 0

21 Size " - " DN5-DN Class 500 8W/8 () Series: SAE J58 Flange Code (SAE000), Code (SAE 000) Components & materials , 5A 5C 0A 7a B 5, 5A 5C 5B 8 7 Body S.St. A79 /L, C.St. A50 LF, C.St A05, C.St A05, B7 N0800 (Alloy 0), B N000 (Monel 00), B57 N00 (Alloy C), B57 N07 (Alloy C7), A79 S5 (5 SMO), A79 S80 (Duplex), A79 S750 (Super Duplex) End A79 /L, A50 LF, C.St A05, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 S.St for /" and /" valves: A5 Gr.0 H50D 7-PH, S.St for " and up valves: A5 CF8M, A79 /L, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) Stem A5 Gr.0 H50D 7-PH, B N000, B57 N00, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) 5* Seat insert PVDF, DELRIN, PEEK, CF PEEK, PCTFE (KEL-F) 5A* Seat housing A79 /L, A50 LF, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 5B* Seat seal PTFE, Graphite, NBR, Viton 5C* Seat seal (optional) NBR, Viton () 8 Series is Habonim's standard valve design without the HermetiX stem seal construction () This material can only be used as part of non HermetiX design * Body seal PTFE, Graphite, NBR, Viton 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A58 0 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L 0A* Slide bearing TF Disc spring A9 7-7PH Stem nut A9 8M, EN50- A-80 Locking clip A7 0 Handle C.St. A9 G000 Zinc plate, S.St. A0 0 5 Serrated washer A0 0 Handle nut A9 8M, EN50- A-80 7 Sleeve PVC 8 Body bolts A9 B8M, EN50- A-80-0 Anti static spring A 0 Anti static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with HermetiX stem seal. Does not supplied in /" and /" valves

22 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system Size " - " DN0-DN80 Class 500 8W/8 () Series: SAE J58 Flange Code (SAE000), Code (SAE 000) Valve dimensions S D C H K (typ x) ø port V B V Preparation for actuation P ø W Stem groove shows valve Q M ball position M TxL Thread F PCD N thread M N thread DD Stem Square shape (std.) Std. Unit port port SAE000 A K K V V Pressure bar / psi SAE000 A K K V V Pressure bar / psi B C D W H M N P Q S ISO PCD F TxL Weight Kv SAE000 SAE000 Cv DN0 mm Full (F07) M.00 M 7.00 M0x.5 M8x0 / inch thread DN50 mm Full 0.00 (F07) M.00 M0.00 M0x.5 M8x0 inch thread DN5 mm / (F00) M.00 M 5.00 M0x / inch UNS-A DN80 mm / (F0) M 7.00 M0.00 Mx8 inch UNS-A

23 Components & materials Size " - " DN0-DN80 Class 500 8W/8 () Series: SAE J58 Flange Code (SAE000), Code (SAE 000) B 7 A 0 5B 5,5A 5C 7a A 5C 5, 5A 5B 8 8 Body S.St. A79 /L, C.St. A50 LF, C.St A05, C.St A05, B7 N0800 (Alloy 0), B N000 (Monel 00), B57 N00 (Alloy C), B57 N07 (Alloy C7), A79 S5 (5 SMO), A79 S80 (Duplex), A79 S750 (Super Duplex) End A79 /L, A50 LF, C.St A05, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 S.St for /" and /" valves: A5 Gr.0 H50D 7-PH, S.St for " and up valves: A5 CF8M, A79 /L, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) Stem A5 Gr.0 H50D 7-PH, B N000, B57 N00, A79 S80, A79 S750, B7 UNS-N0778 (Inconel 78) 5* Seat insert PVDF, DELRIN, PEEK, CF PEEK, PCTFE (KEL-F) 5A* Seat housing A79 /L, A50 LF, B7 N0800, B N000, B57 N00, B57 N07, A79 S5, A79 S80, A79 S750 5B* Seat seal PTFE, Graphite, NBR, Viton 5C* Seat seal (optional) NBR, Viton () 8 Series is Habonim's standard valve design without the HermetiX stem seal construction () This material can only be used as part of non HermetiX design * Body seal PTFE, Graphite, NBR, Viton 7* Stem thrust seal PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 7a** Anti-abrasion ring PEEK, CF PEEK, PCTFE (KEL-F), TFM (), CF PTFE () 8 Stop pin A58 0 9* Stem seal CF PTFE, TFM, Graphite () 0 Follower B78 L 0A* Slide bearing TF Stem nut A9 8M, EN50- A-80 Tab lock washer A0 0 Handle C.St. Zinc plate, A0 L A Stop plate C.St..00 Zinc plate, A0 0 B Wrench head Ductile Iron A5 Gr. 5-5-, A WCB, A5 CF8M Wrench bolt EN50- A-70/A-80, A9 Gr B8/B8M 7 Sleeve PVC 8 Body bolts A9 B8M, EN50- A Anti static spring A 0 Anti static plunger A79 0 Tag (not shown) A7 0 * Repair kit components ** Only with HermetiX stem seal

24 Floating Valves High pressure General Series 7 Series 8 Series Ordering code system Ordering code system The Habonim high pressure ball valve identification code F B 8 W - M W V / X B W - Size Features Series Design Body End Stem Seat Seal End Connection Special features Size Code inch mm 0 ¼ 8 0 / ½ 5 07 ¾ ¼ 5 ½ ½ Features Anti-Static F Fire safe B Full port High pressure R Flush tank Clean assembly for O O service High purity Class I 0000 assembly room M Ammonia service K Chlorine service V Vacuum service A () H () Series Instrumentation valve #500 up to " size 7 Three pieces valve #500 / #500 8 Three pieces valve with hybrid seats #500 Design Basic design () X HermetiX stem seal HermetiX graphitefree fire safe stem W seal Seat / Seat Insert W PVDF Y Delrin K CF PEEK L Virgin PEEK C PCTFE (KEL-F) Body / End C. Steel A05 F C. Steel LF A50 K00 S. Steel L A79 S0 7 Monel 00 B N000 I Inconel 5 B N05 A Alloy 0 B7 N0800 C Alloy C7 B57 N07 W Alloy C B57 N00 D Duplex A79 S80 K Super Duplex A79 S750 S 5SMO A79 S5 C. Steel A05 S. Steel A5 \L, A79 L M S. Steel 7-PH A5 0 S700 7 Monel 00 B N000 Z Inconel 78 B7 N0778 A Alloy 0 B7 N0800 C Alloy C7 B57 N07 W Alloy C B57 N00 D Duplex A79 S80 K Super Duplex A79 S750 S 5SMO A79 S5 Stem M S. Steel 7-PH A5 0 S700 7 Monel 00 B N000 Z Inconel 78 B7 N0778 W Alloy C B57 N00 D Duplex A79 S80 K Super Duplex A79 S750 Seal B NBR V Viton T PTFE G Expanded Graphite I Impregnated Graphite End Connection Flanged RF 500 ANSI B.5 #500 RF 500 ANSI B.5 #500 RF PN0-F EN09 PN0, FTF F PN50-F EN09 PN50, FTF F PN0-F EN09 PN0, FTF F PN00-F EN09 PN00, FTF F Flanged RTJ 500RTJ ANSI B.5 #500 RTJ 500RTJ ANSI B.5 #500 RTJ Flanged SAE J58 / ISO Threaded SAE000 Code /ISO - Flat face SAE000 Code /ISO - Flat face SAE000- Code /ISO - Grooved face SAE000- Code /ISO - Grooved face Flanged SAE J58/ISO Drilled SAE000-XX () Code /ISO - Flat SAE000-XX () face Code /ISO - Flat face SAE000--XX () Code /ISO - Grooved face SAE000--XX () Code /ISO - Grooved face Flanged ISO ISO flange ISO flange End Connection Welded Ends XBW80 Extended buttweld ends (sch80) XBW0 Extended buttweld ends (sch0) XBWXS Extended buttweld ends (sch XXS) XSW Extended socket weld ends Threaded Ends NPT ASME B.0. - National Pipe Taper thread MNPT Male NPT BSPT EN 0- - British Standard Pipe Taper thread DIN EN 0- - British Standard Pipe Parallel thread (Former DIN 999) DIN 85 on-face gasket sealing DIN85 threaded connection AS50 AS 50 on-face gasket sealing threaded connection LAX CPX CAX HYD HC Special stem seals Virgin PEEK thrust and TFM X shape gasket PCTFE thrust and CF PTFE X shape gasket PCTFE thrust and TFM X shape gasket Hydrogen service High cycle service Special features Double NBR O-ring seat sealing (only for 8 series) Double Viton O-ring seat sealing (only for 8 series) Ready for actuation (only for series) DD stem with upstream pressure relief hole Jacketed valve - number of ports (), type (NPT) and size (½") In some applications the available options above are limited to specific sizes. Please consult with Habonim for details. () DELRIN (Y) is Habonim default seat material for H.P. valves. () Due to high torque requirements, 7-PH ball material (code 'M') shall be used. () Applicable for and 7 series only. UB UV ACT WR P50 JN05 The 8 Series Hybrid seats code system 5 5 Insert material Upstream / Downstream Insert Shape Hybrid Seat F C PCTFE K CF PEEK L Virgin PEEK S VESPEL Y Delrin W PVDF 0 Hybrid seats on upstream and downstream, spring loaded Hybrid seats on upstream and downstream 5 Hybrid seats on upstream and metal seat on the downstream side Housing Shape + Seal Type 0 Scraper 0 U + Viton U + NBR Round 5 L + Graphite L + PTFE Hybrid Seat Types UShape LShape O-Ring Seal Bidirectional Graphite or PTFE Seal Insert Shapes The L shape is mainly used for fire-safe or cryogenic applications where an elastomer O-ring cannot be used. The U shape housing allows for the use of O-ring elastomers for general purpose applications.

25 5

26 w w w. h a b o n i m. c o m Habonim USA Toll Free Phone: Toll Free Fax: sales_usa@habonim.com Habonim EUROPE Tel: sales_eu@habonim.com sales_international@habonim.com Habonim AUSTRALIA Tel: sales_au@habonimau.com Habonim CHINA Tel: * sales_china@habonim.com Habonim ISRAEL Tel: Fax: sales_international@habonim.com Habonim UK Tel: Fax: sales_uk@habonim.com Habonim SINGAPORE Tel: Fax: sales_singapore@habonim.com Three piece valves Cat. CAT-High pressures-main 0/8 REV.0

Inspired By Challenge. Three piece ball valves

Inspired By Challenge. Three piece ball valves Inspired By Challenge Three piece ball valves Floating Valves General Fire safe Graphite-free fire-safe Ordering code system Introduction Habonim -piece ball valves 7 series Habonim line of -piece ball

More information

Flush tank valves. Inspired By Challenge

Flush tank valves. Inspired By Challenge Inspired By Challenge Floating Ball Valves General standard TuBore Ordering code system Introduction The Habonim Flush Tank series incorporates all the advantages of the -piece ball valve 7 series and

More information

Diverter valves. Inspired By Challenge

Diverter valves. Inspired By Challenge Inspired y Challenge Floating all Valves General Piece Flanged Ordering code system Introduction are primarily used to split or combine process flows, or to switch medium among different pieces of process

More information

Inspired By Challenge. TuBore clean valves

Inspired By Challenge. TuBore clean valves Inspired By Challenge TuBore clean valves Floating Ball Valves ASME BE ISO 7 DIN 80 Ordering code system Introduction 8 series - the TuBore line The TuBore series is Habonim s line of sterile ball valves

More information

Valve accessories. Inspired By Challenge

Valve accessories. Inspired By Challenge Inspired By Challenge Accessories Locking device Fugitive Emission (FE) Spring Return Handle (SRH) Locking device Compare to standard sliding plate locking devices which are commonly used in the market,

More information

Valve Accessories. Inspired By Challenge

Valve Accessories. Inspired By Challenge Valve Accessories Inspired By Challenge Accessories Locking device Fugitive Emission (FE) Spring Return Handle (SRH) Locking device Compare to standard sliding plate locking devices which are coonly used

More information

Cryogenic valves. Inspired By Challenge

Cryogenic valves. Inspired By Challenge Inspired By Challenge Floating Ball Valves General 3 iece Flanged High pressure ultiport Ordering code system Introduction Under extremely low temperatures and in the harshest of environments, Habonim

More information

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)

More information

ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design

ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through

More information

Cryogenic valves. Inspired By Challenge

Cryogenic valves. Inspired By Challenge Inspired y Challenge Floating all Valves General 3 Piece Flanged High pressure ulti Ordering code system Introduction Under extremely low temperatures and in the harshest of environments, Habonim s cryogenic

More information

DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES

DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:

More information

Manual & Automated Ball Valves

Manual & Automated Ball Valves Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 9000 Series DM9000

More information

TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port

TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING

More information

Engineered Valves For Pipeline Service Application

Engineered Valves For Pipeline Service Application Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru

More information

Pneumatic actuator. Inspired By Challenge

Pneumatic actuator. Inspired By Challenge Inspired By Challenge Actuation COMPACT actuator ESD system Interfaces Ordering code system Introduction Proven advantage The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles

More information

Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,

Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel, Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom

More information

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas Ball Valve Product Summary International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc. www.isvalve.com

More information

CRYOGENIC. Italian Manufactured, Italian Quality

CRYOGENIC. Italian Manufactured, Italian Quality Italian Manufactured, Italian Quality CRYOGENIC Via Di Vittorio 307/25-20099 Sesto San Giovanni (MI) - Italy Tel: +39.028.976.1628 - Fax: +39.028.976.2167 www.sestovalves.com - sales@sestovalves.com Introduction

More information

TRUNNION BALL VALVES. TBV 7.10

TRUNNION BALL VALVES.     TBV 7.10 TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in

More information

Manual & Automated Ball Valves

Manual & Automated Ball Valves Manual & Automated Ball Valves Fire Safe Valves Metal Seated Valves Three Way Valves Automated Valves Standard Service Three Piece Ball Valves Product Matrix for Marwin Valves Model 4600 Series 8700 Series

More information

Series FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves

Series FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves

More information

Introduction. Application & Installation. Integral Block & Bleed Valves

Introduction. Application & Installation. Integral Block & Bleed Valves Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining

More information

Block & Bleed Valve.

Block & Bleed Valve. Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange

More information

International Standard Valve, Inc. Trunnion Mounted Ball Valve

International Standard Valve, Inc. Trunnion Mounted Ball Valve International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API

More information

Petrochemical Industry

Petrochemical Industry Petrochemical Industry Valves, actuators & special solutions HABONIM Petrochemical Industry Solutions 1 Habonim is a leading manufacturer of ball valves and pneumatic actuators. With over 50 years experience,

More information

Series 50 Full Port Flanged Ball Valves

Series 50 Full Port Flanged Ball Valves USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design

More information

Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard

Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek

More information

FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30

FLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30 FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves

More information

BS EN ISO 9001 FM Worcester Controls E51/52 Enviro-Safe High Integrity Flanged Ball Valves

BS EN ISO 9001 FM Worcester Controls E51/52 Enviro-Safe High Integrity Flanged Ball Valves BS EN ISO 9001 0086 as FM 00707 Enviro-Safe High Integrity Flanged Ball Valves GENERAL DESCRIPTION With environmental control already established as a major issue for the future, has launched a range of

More information

Ball Valves & Accessories

Ball Valves & Accessories Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with

More information

International Standard Valve, Inc. Trunnion Mounted Ball Valve

International Standard Valve, Inc. Trunnion Mounted Ball Valve International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire

More information

10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction

10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction 1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up

More information

FSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC

FSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation

More information

CLASS 150 & 300 REDUCED BORE BALL VALVES

CLASS 150 & 300 REDUCED BORE BALL VALVES CLASS 150 & 300 REDUCED BORE BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 503 507 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL A:

More information

DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS

DM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve

More information

Three Piece Forged Trunnion Mounted Ball Valve

Three Piece Forged Trunnion Mounted Ball Valve International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320 Houston, Texas 77041 713-983-7600 TM Three Piece Forged Trunnion Mounted Ball Valve 2 through 56 ASME Class 150-1500 Bolted or Welded

More information

TM SERIES Engineered Valves For Pipeline Service Application

TM SERIES Engineered Valves For Pipeline Service Application Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt

More information

TECHNICAL BULLETIN. Valdisk TX3 Triple Offset Butterfly Control Valve. Experience In Motion FCD VLENTB A4 1/16

TECHNICAL BULLETIN. Valdisk TX3 Triple Offset Butterfly Control Valve. Experience In Motion FCD VLENTB A4 1/16 TECHNICAL BULLETIN Valdisk TX3 Triple Offset Butterfly Control Valve FCD VLENTB0061-00-A4 1/16 Experience In Motion Contents Triple Offset Butterfly Valve 3 Product Specifications 3 About Triple Offset

More information

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas

International Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas - International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 TM Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc.

More information

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963 800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300

More information

Worcester 53/54 Series. Reduced Bore Flanged Ball Valves to DIN 3202

Worcester 53/54 Series. Reduced Bore Flanged Ball Valves to DIN 3202 Worcester 3/4 Series Reduced Bore Flanged Ball Valves to DIN 3202 General Description Since its introduction to industry, the Series 3/4 ball valve has become a major force in the world of fluid control.

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component

More information

NELES TRUNNION MOUNTED BALL VALVE SERIES D

NELES TRUNNION MOUNTED BALL VALVE SERIES D NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience

More information

BS EN ISO 9001 FM Worcester Controls 5 Series BS 5351 Approved Flanged Ball Valves

BS EN ISO 9001 FM Worcester Controls 5 Series BS 5351 Approved Flanged Ball Valves BS EN ISO 9001 0086 as FM 00707 Worcester Controls BS 5351 Approved Flanged Ball Valves Worcester is proud to announce the introduction of its new 519/529 range of ball valves which replaces the DN 15-50

More information

BLOCK & BLEED VALVE. High Technology Valve & Fitting Series.

BLOCK & BLEED VALVE. High Technology Valve & Fitting Series. BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions

More information

Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments

Delivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component

More information

FLANGED 150 & 300 FULL PORT BALL VALVES

FLANGED 150 & 300 FULL PORT BALL VALVES FLANGED 150 & 300 FULL PORT BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED STEEL BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 25A 25J 402 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL

More information

3000R Series. Reduced Port 2-Way 3-pc Body

3000R Series. Reduced Port 2-Way 3-pc Body Up to 4 psi WOG (276 bar) 3R Series 3R-xxx Series Valve Quick Spec Product Scope Size Range 1/2", Body Type 3-pc, non Swing-out design End Connections Flanged, NPT, Weld, Custom Pressure Rating up to 4

More information

3000F Series. Full Port 2-Way 3-pc Body

3000F Series. Full Port 2-Way 3-pc Body Up to 4 psi WOG (275 bar) 3F Series 3F-xxx Series Valve Features Up to 4 psi service Special barstock body material options including Alloy 2, Duplex, Hastelloy C, Monel, Titanium, 254 SMO, Bronze and

More information

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes

More information

Two-Way Metal Seated Ball Valve Type 16-R

Two-Way Metal Seated Ball Valve Type 16-R Two-Way Metal Seated Ball Valve Type 16- Design Characteristics Split body Trunnion mounted ball with integral stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards

More information

SOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES

SOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES CSTS SERIES Quality equates to the sum of Applied Science Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTS Series February 2016 CSC Valves Canada Inc. operates

More information

Worcester Controls F819/829. Full Bore Firesafe Flanged Ball Valves

Worcester Controls F819/829. Full Bore Firesafe Flanged Ball Valves Worcester Controls F819/829 Full Bore Firesafe Flanged Ball Valves With the Series 819/829 designed to BS EN ISO 17292, Flowserve Worcester Controls brings to the market a full bore valve which combines

More information

Pneumatic actuator. Inspired By Challenge

Pneumatic actuator. Inspired By Challenge Inspired By Challenge Actuation COMPACT actuator ESD system Interfaces Ordering code system Introduction Proven advantage The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles

More information

High Performance Butterfly Valves

High Performance Butterfly Valves Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6

More information

WKM 320F. Flanged floating ball valves

WKM 320F. Flanged floating ball valves WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5

More information

T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet

T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not

More information

505F Multi-Port Ball Valve

505F Multi-Port Ball Valve 505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way

More information

Products for the Oil & Gas Industry

Products for the Oil & Gas Industry Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing

More information

TBV Series Diverter and three-way ball valve

TBV Series Diverter and three-way ball valve TBV Series 5100 Diverter and three-way ball valve TBV Series 5100 Ball Valve The Cameron portfolio of TBV* valves includes the series 5100 diverter and three-way ball valve, which enables accomplishing

More information

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation. Motion & Flow Control Products, Inc Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our

More information

PBV s Engineering Excellence At Work

PBV s Engineering Excellence At Work PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves

More information

Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM

Control Valve. 3-Piece 30, 60, or 1/8 Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM 324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for

More information

BALL VALVE SERIES Pneumatic actuator - El-O-Matic

BALL VALVE SERIES Pneumatic actuator - El-O-Matic C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G

More information

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation BALLVALVE.COM

Valve Products INLINE. Ball Valves. Direct Mount. Multi-port. Sanitary. Valve Automation BALLVALVE.COM Valve Products Ball Valves Direct Mount Multi-port Sanitary Valve Automation INLINE BALLVALVE.COM Inline has been supplying innovative valve solutions to the process industry for nearly twenty years. Our

More information

CAST TRUNNION BALL VALVE

CAST TRUNNION BALL VALVE CAST TRUNNION BALL VALVE ATLAS SERIES BEHIND THE NAME With a renewed focus on product leadership through innovation and quality, C&C is your world class provider of flow solutions. 2 Atlas, a Titan known

More information

Triple offset valve with metallic seat for High performance. Class 600: 8 to 24 (DN 200 to 600) Design in accordance with EN and ASME B16-34

Triple offset valve with metallic seat for High performance. Class 600: 8 to 24 (DN 200 to 600) Design in accordance with EN and ASME B16-34 Type series booklet 8613.1786/5--EN TRIODIS 600 Triple offset valve with metallic seat for High performance Class 600: 8 to 24 (DN 200 to 600) Design in accordance with EN 12516 and ASME B16-34 Applications

More information

SERIES 17 3 & 4 WAY BALL VALVE

SERIES 17 3 & 4 WAY BALL VALVE SERIES & WAY BALL VALVE CARBON STEEL ASTM A WCB STAINLESS STEEL ASTM A CF8M LIVE LOADED STEM PACKING BLOWOUT PROOF STEM AVAILABLE IN T, L, LL & 80 PORT CONFIGURATION LOCKABLE HANDLE ISO MOUNTING PAD SEAT

More information

Instrumentation Ball Valves

Instrumentation Ball Valves Rev. 0-2016 Ball Valve Main Components: 1. Obturator or closure member: part of the valve positioned in the flow stream to allow or prevent the flow (ball or tip); 2. Stem: part which connects the obturator

More information

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial 505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F

More information

Ball Valves. Quality Valves at Low Cost

Ball Valves. Quality Valves at Low Cost Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct

More information

Keystone WINN Hi-Seal High Performance Butterfly Valve

Keystone WINN Hi-Seal High Performance Butterfly Valve m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive

More information

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

More information

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES

More information

PBV. Threaded and Socketweld Ball Valves P.B.V.

PBV. Threaded and Socketweld Ball Valves P.B.V. PBV Threaded and Socketweld Ball Valves P.B.V. TABLE OF CONTENTS Overview...3 How to Identify PBV-USA Valves...4 Seat Materials...5 Materials/Parts/Dimensions/Weights Master Star - 5333/6333...6 Superstar

More information

MODEL NUMBER - VALVE SELECTION CODES

MODEL NUMBER - VALVE SELECTION CODES Threaded Valves Model Selection Page: 1 S85 S51 1 08-3 - R - R - L 05 - B - T - T - L - 3-4 - 5-6 S0 S80 S70 S51 1 Type S0FS S85 S90 HP6000 S40 HX10000 01 1/4" 05 1" 09-1/" Size 0 3/8" 06 1-1/4" 10 3"

More information

Standard Port, Uni-Body Flanged Ball Valves

Standard Port, Uni-Body Flanged Ball Valves USA 800-766-0076 Fax 323-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Standard port, Uni-body design

More information

Features BALL VALVES. Split Wafer. Carbon steel wafer PN ANSI 600 STANDARD FEATURES FEATURES ON REQUEST

Features BALL VALVES. Split Wafer. Carbon steel wafer PN ANSI 600 STANDARD FEATURES FEATURES ON REQUEST OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:

More information

Two-Way Soft Seated Ball Valve Type 75-S

Two-Way Soft Seated Ball Valve Type 75-S Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,

More information

Ref FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:

Ref FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref: FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in

More information

K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180

K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180 SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body

More information

Exploded view 3 piece ball valves Series R

Exploded view 3 piece ball valves Series R Exploded view 3 piece ball valves Series R Ball valve of series R with reduced bore (standard version) DN10 to DN65 Example shown: Series R DN65 Please follow assembly and maintenance instructions carefully.

More information

FORGED TRUNNION BALL VALVE

FORGED TRUNNION BALL VALVE FORGED TRUNNION BALL VALVE TRIDENT SERIES BEHIND THE NAME With a renewed focus on product leadership through innovation and quality, C&C is your world class provider of flow solutions. Similar to how Poseidon

More information

2 PIECES BALL VALVE PN63

2 PIECES BALL VALVE PN63 2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C

More information

Materials : Forged carbon steel or stainless steel

Materials : Forged carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2

More information

HOKE Monoflange Valves. Primary Isolation Valves

HOKE Monoflange Valves. Primary Isolation Valves HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral

More information

Vee-Ball Designs V150, V200 and V300 Rotary Control Valves

Vee-Ball Designs V150, V200 and V300 Rotary Control Valves January 000 Bulletin 5.3:Vee-Ball Vee-Ball Designs V50, V00 and V300 Rotary Control Valves This bulletin covers the - through -inch, 3- through -inch Series B, and the 4- through 0-inch Designs V50, V00

More information

Contents. G Series stainless steel ball valves. F Series flanged ball valves. C Series carbon steel ball valves. B Series brass/bronze ball valves

Contents. G Series stainless steel ball valves. F Series flanged ball valves. C Series carbon steel ball valves. B Series brass/bronze ball valves Product Guide Contents H Series steel ball valves Product order code information 1.1 HM-3ART/LRT: reduced port, 3 piece, NPT, API 67 1.2 HM-3AFT/LFT: full port, 3 piece, NPT, API 67 1.3 HM-3AFSW/3LFSW:

More information

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents

,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product

More information

Materials : Forged carbon steel or stainless steel

Materials : Forged carbon steel or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire

More information

Two-Way Metal Seated Ball Valve Type 75-M

Two-Way Metal Seated Ball Valve Type 75-M Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO

More information

Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f. W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &

More information

Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.

Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely

More information

Butterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300)

Butterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300) Butterfly Valve Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300) Sizes: - 2 to 120 (50mm to 3000mm) Rating: - Class 150 & PN16 Wafer Type Lug Type Flanged End Information:- www.invacovalves.com

More information

METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW

METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW METSO NELES HIGH PERFORMANCE VALVE, METAL SEATED SERIES BW Neles BW series metal seated high performance butterfly valve with one piece body design, for both control and tight shut-off applications. Multiple

More information

HSV SERIES 2-PIECE BALL VALVES

HSV SERIES 2-PIECE BALL VALVES HSV SERIES 2-PIECE BALL VALVES Split Body metal seated ball valves for the Pulp and Paper and Power Industry. Design Pressure Rating 150# Available in Sizes 3 to 8 300# Available in Sizes 3 to 8 Valve

More information

Peter Meyer Ball valves Cryogenic

Peter Meyer Ball valves Cryogenic Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98

More information