Axial geteilte Spiral-gehӓusepumpen Axial split case pumps ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
|
|
- Solomon Walker
- 5 years ago
- Views:
Transcription
1 ASE ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
2 Introduction RITZ ( ) ASE axial split case pumps has been developed for wide range of application benefiting both the industrial users and the municipality. These pump offers excellent NPSH values and maximum efficiency thus achieving the lowest Life Cycle Cost possible for its users. Applications Building Service Irrigation Waterworks Industrial & Marine Water Supply, HVAC, Drainage, Water Circulation, District Cooling/heating Water supply, Drainage Water Intake, Booster, Water Supply Water Intake, Booster, Circulation, Drainage, Process, Bilge pump, Fire fighting Operation Range Capacity Discharge Pressure Temperature Maximum suction Pressure Design Casing Pressure Up to 10,800 m3/h Up to 20 bar Up to 120 DegC Up 16 bar Up to 25 bar Materials Description Standard Option Option Option Option Option Volute Casing Cast Iron Ductile Iron SS304 SS316 SS316L Duplex SS Casing Wearing Cast Iron Ductile Iron SS304 SS316 SS316L Duplex SS Impeller Cast Iron Bronze SS304 SS316 SS316L Duplex SS Impeller Wearing Cast Iron Bronze SS304 SS316 SS316L Duplex SS Shaft Sleeve SS410 Bronze SS304 SS316 SS316L Duplex SS Shaft Carbon Steel SS410 SS304 SS SS SS Shaft Seal Gland Packing Carbon/Ceramic Sic/Carbon Sic/Sic Flange Drilled ISO PN16/PN25 ANIS 150/250Lbs JIS 16/25K Bearing Lub Greased Oil Sealing NBR Viton * Balance seal (on Option) * Flange Face available in both Rised Face (RF) and Flat Face (FF) Designation Code ASE E- H/V Horizontal/Vertical Impeller Nominal Size (mm) & Version Discharge Nominal Size (mm) Suction Nominal Size (mm) Pump series 2
3 The Constructive Benefits of RITZ - an Overview: Shaft. A short shaft with protection sleeves. The benefits: The small distances between bearings ensure that the pump operates with minimal vibration, while the corrosionresistant and abrasion resistant materials mean a long service life. Impeller. Hydraulically optimized, doubleflow radial impeller with large impeller inlet surfaces. The benefits: Optimal suction with excellent NPSH values. Maximum efficiency minimizes operating costs. The double-flow design reduces the load (axial thrust) on the bearings to a minimum, thereby contributing to a longer service life. Bearings. Bearing on both sides with generously dimensioned, grease lubricated roller bearings. The benefits: An extremely stable rotor unit that ensures quiet, low-vibration operation and a long service life. Casing. Axial split casing of the in-line type, available in different materials. The benefits: maintenance and inspection without having to remove the pump from the pipe system. Simple assembly of the top part with an automatic locking device. Seal. Available with a gland packing or a maintenance free mechanical seal in different material combinations.suitable for drinking water! The benefits: Can be adjusted to suit operating conditions. Identical components make it easy to change to other types of seals. 3
4 Characteristics 50Hz 50Hz Other performance pumps can be designed by orders. * 60Hz curve on request 4
5 Characteristics 50Hz * 60Hz curve on request 5
6 Characteristics 60Hz 6
7 Installing style horizontal vertical Pipe system for sealing water flushing system for packing flushing system for mechanical seal flushing system for packing and guide bearing flushing system for mechanical seal and guide bearing Rotating direction/flow direction horizontal vertical anti-clockwise clockwise anti-clockwise clockwise 7
8 General Sectional Drawing ASE H up to H Horizontal Installation No Part Name No Part Name No Part Name 1 Bearing body 7 Impeller 13 Shaft 2 Bearing 8 Sealing shaft sleeve 14 Oil location 3 Bearing cover 9 Packaging or 15 Air vent machanical seal 4 Sealing body 10 Sealing cover 16 Oil mark 5 Pump cover 11 Pump casing 6 Case sealing ring 12 Block ring 8
9 General Sectional Drawing ASE V up to V Vertical Installation Part No Description Part No Description Part No Description 116 Volute casing 112 Spring 118 Casing wear ring 103 Cover 115.1,2,3,6 O-Ring 119.1,2,3 Shaft protecting sleeve 101 Foot 120.1,2 Radial shaft seal ring 104 Spacer sleeve 123 Pump shaft 114 Shaft seal housing 105 Bearing bush 117 Impeller 107 Valve 113.1,2 Washer 121 Bearing 128A Gland packing 106 Flexible tube 102 Motor stool 131 Stuffing box insert 111 Nut Bearing housing 127 Neck ring 122 Circlip 126 Bearing cover 129 Lantern ring 9
10 Dimension Print for ASE H to H Flange Size Pump Size W.T Type Inlet flange Outlet flange (Kg) DN1 S1 K D n-ød DN2 S2 K D n-ød a1 a2 f h5 l2 Zl) GT ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE * Dimension in mm. 10
11 Dimension Print for ASE H to H Flange Size Pump Size W.T Type Inlet flange Outlet flange (Kg) DN1 S1 K D n-ød DN2 S2 K D n-ød a1 a2 h1 h2 h3 h4 l1 f GT ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE ASE * Dimension in mm. 11
12 Zufriedene Kunden sagen mehr als tausend Worte. Satisfied customers are worth a thousand words. RITZ Pumpenfabrik GmbH & Co. KG PO Box Schwaebisch Gmuend Germany Telephone +49 (0) / Telefax +49 (0) / info@ritz.de Asia Pacific Office: Ritz Pumps Pte Ltd 25 International Business Park #04-65 German Centre Singapore Telephone (65) Fax (65) ritzsin@pacific.net.sg The manufacturer reserves the rights to make changes without prior notice.
Normpumpen nach DIN EN 733 einschl Standard horizontal pumps to DIN EN 733 NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES
NORMA J ( ) PUMPS I MOTORS I SYSTEMS I SERVICES Introduction Pumps of the Norma J ( ) Series are horizontal volute casing centrifugal end suction pumps with Back Pull-out feature. Principal dimensions
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationSMN Double-Suction Axially Split Pump
SMN Double-Suction xially Split Pump motralec 4 rue Lavoisier. Z Lavoisier. 95223 HERBLY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail : service-commercial@motralec.com www.motralec.com
More informationSMD axially split casing, double suction pump
SMD axially split casing, double suction pump Main applications SMD single stage, double suction, axial split casing pumps are designed to meet the needs of the water market for a wide range of raw, clean,
More informationPA SERIES END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 THONG FATT JAYA MACHINERY HARDWARE SDN. BHD.
END SUCTION CENTRIFUGAL PUMP SINGLE STAGE BACK PULL-OUT DIN24255 50HZ OR 60HZ PA SERIES APPLICATIONS PA Series pumps can be used for the following services in commercial, residential, agriculture, industrial,
More informationHorizontal Double Suction Volute Pump Type CN. Pipe line
PUMP Horizontal Double Suction Volute Pump Type APPLICATIONS Buildings Irrigation Water supply Drainage Water circulation Fire fighting Air conditioning Water supply Drainage Waterworks Water intake Booster
More informationSide channel pumps PN 16 SOH - SOHB - SOHM. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB - SOHM Technical description ATEX certified The SOH side channel pump models are available in a variety of designs. Design base plate
More informationabcdef EUseries EN733/DIN End Suction Centrifugal Pumps where innovation flows SNG
abcdef SNG 09 where innovation flows EN7/DIN 22 End Suction Centrifugal Pumps www.euroflopumps.com Coding System Eg. EU 2 / 1 MBC DB EUM / 2 MBC A2-01 Series EU = Bareshaft pumps EUM = Monobloc pumps X
More informationSide channel pumps PN 16 SOH - SOHB. Self-priming centrifugal pumps. Technical description
Side channel pumps PN 16 Self-priming centrifugal pumps SOH - SOHB Technical description Operating data Design Industries Media pumped: Nominal diameter: 1-1 1 /2 Flow rate: 0.3-7.5 m 3 /h Pump head: 5-155
More informationRDLO / RDLO V Type Series Booklet
RDL / RDL V Type Series Booklet Legal information/copyright Type Series Booklet RDL / RDL V All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or
More informationHORIZONTAL SPLIT CASING PUMP
HORIZONTAL SPLIT CASING PUMP HORIZONTAL PUMP CONSTRUCTION MBH Horizontal Split Casing Pumps - a new concept for better performance and higher efficiencies. For greater interchangeability and ease of maintenance,
More informationBoiler Feed Booster Pump YNK. Type Series Booklet
YNK Type Series Booklet Legal information/copyright Type Series Booklet YNK All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any
More informationRDLO / RDLO V. Axially Split Volute Casing Pumps. Fields of Application. Bearings. Operating Data. Materials. Design. Shaft Seal. Designation 01 P F
Type Series Booklet 1387.5/2--10 RDLO / RDLO V Axially Split Volute Casing Pumps Fields of Application Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems,
More informationRDLO / RDLO V Type Series Booklet
RDL / RDL V Type Series Booklet Legal information/copyright Type Series Booklet RDL / RDL V All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or
More informationData sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6
Data sheet Item no.: Page: 1 / 6 Operating data Operating data determined for maximum inlet pressure Pumped medium Water Clean water Not containing chemical and mechanical substances which affect the materials
More informationSIHI multi. Modular multistage pumps. Type MSL, MSM. Description. Construction. Applications. Technical Data. Options
Modular multistage pumps SIHI multi Type MSL, MSM Description SIHI multi pumps are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN
More informationHigh-pressure pumps Series HP45
High-pressure pumps Series HP45 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationHORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH
HORIZONTAL SPLIT CASING PUMPS TYPE : UP / UPL / UPH HORIZONTAL AXIALLY SPLIT CASING PUMPS Range : Delivery size upto 1220 mm Capacity up to 24,000 m³/hr Head up to 180 meters Applications : Suitable for
More informationAxially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data
Type series booklet 1385.52/3--10 RDLV Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationData sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57.
Data sheet Item no.: 3700 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 415.38 m ³/h Clean water Actual developed head 57.81 m Not containing chemical and Efficiency 82.3 % mechanical
More informationEUF/EUFS series. Fire Pump PSB Listed according to CP52(Singapore)
ANNEX 1: SPECIMEN OF LOGO and MARK A) SETSCO (Registered) Logo where innovation f l ow s B) SETSCO Mark for Ready-Mixed Concrete Cert No: RMC-YYYY-XXX-A C) SETSCO Mark for Fire Safety Products Fire Pump
More informationHigh-pressure pumps Series HP49
High-pressure pumps Series HP49 www.andritz.com/pumps General Description / Application Multi-stage high pressure pumps for water supply, irrigation and industrial applications, for hot and cold water
More informationSJP Vertical Propeller Pumps
Sulzer Pumps SJP Vertical Propeller Pumps The Heart of Your Process Sulzer Pumps Sulzer Pumps is a world leader in reliable products and innovative pumping solutions. Our advanced research and development,
More informationVertical multistage centrifugal pumps in ring-section design
Vertical multistage centrifugal pumps in ring-section design Vertical multistage centrifugal pumps in ring-section design PUMP DESIGN Multistage centrifugal pumps in ring-section design, radially split,
More informationStandard SO according to DIN
Standard SO according to DIN 24.255 DESIGN FEATURES Design Features Horizontal centrifugal, single Stage pump. Spiral volute casing. Overhung on shaft impeller. Grease or oil lubricated antifriction bearing.
More informationPUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation.
SKD SERIES PRODUCT DESCRIPTION AND TECHNICAL DATA PUMP TYPE Single stage, axially split volute casing pump with double entry radial impeller, for horizontal installation. APPLICATION Water supply systems,
More informationBearings. Shaft seal. Materials
Type series booklet 1385.51/3--10 RDL Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationKIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM
KIRLOSKAR HORIZONTAL AXIALLY SPLIT CASING PUMPS - TYPE DSM Description Range : Delivery size up to 150 mm Capacity up to 470 m 3 /hr Head up to 180 metres Application : Suitable for Water Works, Circulation
More informationZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps
ZPP and Z22 Double Suction Axially Split Single Stage Centrifugal Pumps Main Applications Features and Benefits ZPP and Z22 double suction axially split single stage centrifugal pumps are used for demanding
More informationSIHI multi Type MSC. Modular multistage pumps. Description. Construction. Applications. Optional special designs. Materials.
Modular multistage pumps SIHI multi Type MSC Description The SIHI multi MSC range of horizontal, ring-section multistage pumps have been designed for long-term reliability when pumping high pressure liquids.
More informationNorm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
More informationVERTICAL IN-LINE PUMP
VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line
More informationGeneral Catalog. A New Vision for Quality Pumps. General Catalog
General Catalog A New Vision for Quality Pumps General Catalog 2 Tru20 is committed to only the highest quality pumping products. We produce a tremendous range of water and process pumps in order to serve
More informationSILI PUMP, Your reliable one-stop supplier of marine pumps.
SILI PUMP, Your reliable one-stop supplier of marine pumps. Shanghai SILI PUMP Industry Co., Ltd. Add: No.128 Jinyuan Road, 201518, Shanghai, China (Jinyuan Industry Area) Tel: 0086-21-39109967, fax: 0086-21-39109967
More informationWaterflo WF Series Back pull-out End Suction Centrifugal pump
08 Waterflo WF AKAY INDUSTRIES AKAY WATERFLO WF SERIES Akay WATERFLO WF Series range fully complies to both performance and dimensional standards to the international Standard DIN 24255 Stuffing Box Standard
More informationSide channel pumps ADH/CDH AEH TECHNICAL DATA. Temperature: max. 120 C. PN 40 for AEH
Side channel pumps ADH/CDH 0801... 2504 AEH 0805... 0808 TECHNICAL DATA Capacity: Head: Speed: max. 7,2 m³/h max. 400 m max. 3000 rpm Temperature: max. 120 C Casing pressure: Shaft sealing: PN 25 for ADH/CDH
More informationDesign Characteristics. Aplicaciones
Design Characteristics Single stage centrifugal. Casing axially split. Double entry impeller. Bearings on both sides of impeller. Suction and discharge branches located in lower casing. Características
More informationSide Channel Pumps Self-priming, segmental type with verly low NPSH
Side Channel Pumps Self-priming, segmental type with verly low NPSH CEH Sizes 1201 6108, 1202/5 6108/5, 1202/7 6107/7 Technical data Capacity: Delivery head: Speed: max. 35 m³/h max. 354 m max. 1800 1/min
More informationAxially Split Case Pumps
Axially Split Case Pumps A-C Pump A-C SPL Standard Design Features for a Wide Range of Heavy Duty In STUFFING BOX Packing is standard on the A-C products. A wide variety of mechanical seals, including
More informationCPS. Horizontal Split Case Centrifugal Pump
CPS Horizontal Split Case Centrifugal Pump CPS Series pumps, are single-stage double suction split case centrifugal pumps designed for applications of clean water or similar liquids without solids in water
More informationISO 2858 Back Pullout End Suction Centrifugal Pumps
ISO 2858 Back Pullout End Suction Centrifugal Pumps Back Pullout End Suction Centrifugal Pumps Applications: Irrigation Water transfer Building Services Pressure Boosting Mining HVAC Features: Designed
More informationGoulds Medium Capacity, Single Stage, Double Suction Pump
Goulds 3409 Medium Capacity, Single Stage, Double Suction Pump 3409 Double Suction Pumps Designed for a Wide Range of Industrial, Marine and Power Generation Services Capacities to 12,000 GPM (2725 m3/h)
More informationHORIZONTAL MULTI STAGE PUMPS
HORIZONTAL MULTI STAGE PUMPS APPLICATIONS Water supply Hot/cold water Sprinklers Agriculture Construction Factories Mines Boiler feed Other general high pressure services *Please choose the model, referring
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationHYDRO-TITAN. Heavy duty back pullout water & process liquid pumps
HYDRO-TITAN Heavy duty back pullout water & process liquid pumps Positioned for Reliability The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More informationGoulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and
More informationHigh-Temperature and Pressure Paper Stock / Process Pump
3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads
More informationKIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN / ISO 5199
KIRLOSKAR ROMAK PUMP - RMK ISO 2858 / DIN EN 22858 / ISO 5199 MAGNETIC DRIVE PUMP TYPE - RMK RANGE Discharge capacity (Q) : 3 Up to 300 m /hr Delivery head (H) : Up to 150 m (at 2900 rpm) Available nominal
More informationCENTRIFUGAL PUMPS SAE ENGINE DRIVE 10" FEATURES
FEATURES Volute: Heavy ductile iron construction; back pullout design; can be rotated for ease of installation Impeller: Ductile iron enclosed design for high efficiency; superior NPSH characteristics
More informationEnd suction back pull-out pumps for general industry, mining, rural and building services
End suction back pull-out pumps for general industry, mining, rural and building WHY COMPROMISE? The TKL KL-ISO end suction, back pull-out pump range is anything but ordinary it is the result of an intensive
More informationSeries Split Coupled Vertical In-Line Pumps. File no.: 43.10in Date: august 14, 2013 Supersedes: 43.10in Date:
Series 00 Split Coupled Vertical In-Line Pumps File no.:.0in Date: august, 0 Supersedes:.0in Date: february 0, 0 Series 00 Best commercial hvac pump design available since 99 Life cycle value at every
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationVERTICAL TURBINE PUMP
21A, Canning Street, Ground Floor, Kolkata 700001, (W.B) India Ph.: (033) 22308125, 39855288, Mob: 09339834915 Fax: (033) 2230 8125, E- mail: powerpointpumps@yahoo.co.in Website: www.powerpointpumps.com
More informationFeatures: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
More informationManufacturing Program: LAND APPLICATIONS. Mixed Flow Pump. type TR
Mixed Flow Pump type TR Constructional Features Vertical single and multi-stage mixed flow pumps for wet pit installation. Standardised asembly groups: suction, casing, column pipe, discharge bend, rotor
More informationCasing. Impeller. Gland. Shaft. Bearing Bracket. Support Foot RANGE APPLICATIONS
Casing Impeller Gland Shaft Bearing Bracket Support Foot RANGE APPLICATIONS Delivery size : up to 150 mm Capacity Head 3 : up to 550 m /hr : up to 100 metres Circulation of water in industries, Air-conditioning
More informationVolute Casing Pump additional sizes to those of ISO 2858/EN 22858
Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationfranklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering
More informationJansen Pompentechniek T: +31(0) E:
1 1 VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet) Speed up to 1450 min -1 (1450 r.p.m.) Sizes: DN 65 up to DN 150 (21/2 up to 6 )
More informationKIRLOSKAR END SUCTION PUMPS-TYPE DB/DBHS. Description. Cut-sectional View. Shaft :
KIRLOSKAR END SUCTION PUMPS-TYPE DB/DBHS Description Range : Delivery size up to 150 mm Capacity up to 550 m 3 /hr Head up to 100 metres Applications : Suitable for Circulation of Water in Industries,
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More informationBristol: A History & Future.
Fire Pumps Bristol: A History & Future. In 1971, seven emirates joined forces to create the United Arab Emirates, with the goal of becoming a growing leader on an international scale. The UAE s focus has
More informationVOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps
VOGEL - Sewage Pumps Design KS, Channel Type Pumps Design W, WTS, Vortex Type Pumps VOGEL - Pumps with Channel Type Impeller, Design KS Capacity up to 500 m 3 /h (2200 USgpm) Head up to 45 m (150 feet)
More informationDry installed end-suction pumps, LSN-series. according to ISO 2858 / ISO 5199
Dry installed end-suction pumps, LSN-series according to ISO 2858 / ISO 5199 Technical characteristics Performance 50 Hz 60 Hz Capacity up to 600 m 3 /h 2900 USgpm Head up to 170 m 800 feet Speed up to
More informationPTB GLV. Vertical Centrifugal Pump
Vertical Centrifugal Pump GLV Application Vertical centrifugal pumps, approved in design and certified, are applied as tank installation pumps in areas with explosion hazard. Equipped with special safety
More informationabcdef EJseries Self-Priming Centrifugal Pumps where innovation flows SNG
abcdef SNG 9 where innovation flows Self-Priming Centrifugal Pumps EJseries www.euroflopumps.com Coding System EJseries Series EJS = Shaft Sewage Bare Pumps EJT = Large Flow Trash Pumps EJU = High Head
More informationMaterials: Parts of the pump in contact with the liquid are manufactured from the following standard
Plastic Centrifugal Pump For Chemical Process DIN EN 22858 (ISO 2858)Standard DESCRIPTION pumps are manufactured to DIN EN 22858 (ISO 2858) standards in respect of design, performance and dimensions. They
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationRS Series Multi-stage, Ring Section Pump For Pressures to 1,500 PSI
RS Series Multi-stage, Ring Section Pump For Pressures to 1,500 PSI The RS Series The RS is our new process duty, horizontal ring section multi-stage pump. Designed for moderate to high pressure pumping,
More informationVogel - Volute Casing Pumps. according to ISO 2828 / ISO 5199 Design LSN
Vogel - Volute Casing Pumps according to ISO 2828 / ISO 5199 Design LSN 1 Volute Casing Pumps - Design LSN - according ISO 2858 / ISO 5199 Performance Capacity up to 450 m 3 /h (1980 USgpm) Head up to
More informationData sheet. Page: 1 / 5 ETN GG A 11GA201502B. Operating data. Design. Requested developed head m. Efficiency 74.
Data sheet Page: 1 / 5 Operating data Requested flow rate 160.00 m³/h Actual flow rate 159.85 m³/h Operating data determined for maximum inlet pressure Actual developed head 20.96 m Requested developed
More informationElite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
More informationCENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
More informationSubmersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution
Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor
More informationF-Series Fire Fighting Pumps
F-Series Fire Fighting Pumps VISION To be a leading local manufacturer and reliable partner providing engineered products and solutions to our customers. MISSION Supporting the socio-economic development
More informationTKL. Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump. Experience In Motion
TKL Hydro-Titan Heavy Duty Back Pull-out Water & Process Liquid Pump Experience In Motion 1 The total cost of a pump includes not only purchase price, but cost of operation: power costs, reliability, ease
More informationHORIZONTAL DOUBLE SUCTION VOLUTE PUMPS
HORIZONTAL DOUBLE SUCTION VOLUTE PUMPS APPLICATIONS Buildings Water supply Drainage Water circulation Fire fighting Air conditioning Irrigation Water supply Drainage Waterworks FEATURES Split case design
More informationPUMPS. ToronTech. CATALOGUE 2014 TTAAB-Series of Pulp Pumps (ISO) ToronTech.com PRODUCT BROCHURE
TM ToronTech TM ToronTech Torontech is a leading North American based international manufacturer and supplier of pumps, pipes, valves & actuators. The Torontech group has established an extensive network
More informationPROCESS PUMPS MODEL V200 ANSI B73.2
EAGLE PROCESS PUMPS V200 ANSI B73.2 POWER END Shaft Diameters Bearings Stuffing Box PUMP END Maximum Diameter Solids Minimum Casing Thickness Casing Corrosion Allowance Working Pressure Test Pressure
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017
Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationEVMU. Model EVMU / EVMUG / EVMUL Contents. EBARA Stainless Steel Vertical Multistage
Model / G / L Contents Item No. Specifications Selection Performance Pump Sectional Chart Curve Dimensions View 3 5 10 18 G32 G45 G64 L3 L5 L10 L18 L32 L45 L64 803 804 803 804 805 806 807 808 809 810 811
More informationGIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN
GIS/ GISO Series End Suction Pumps TECHNICAL BULLETIN Goulds Water Technology is renowned for manufacturing the highest quality pumping equipment utilizing the best engineering practices available worldwide.
More informationKSB RPH-V. Process pumps. 3. Designation. 1. Application. 2. Design. 4. Operating Data. to API 610, 11th edition and ISO 13709
Type Series Booklet 1316.56/04-EN (A1316.0.2E/8) KSB Process pumps to API 610, 11th edition and ISO 13709 1. Application pumps are mainly used in refineries as well as in chemical and petrochemical plants.
More informationSJT/SJM CWP Vertical Pump
SJT/SJM CWP Vertical Pump Main Applications Non Pull-out Construction SJT/SJM CWP pumps can be used in the following fields: Cooling water pumps in utility and industrial power stations Water supply Irrigation
More informationES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS
ES-ISO ES-NEW GENERATION BACK PULL-OUT END SUCTION PUMPS Conforms to ISO 2858 Conforms to ISO 5199 Optimized for capacity Efficiency as per Hydraulic Institute & Europump Norms Many product variants -
More informationVolute pumps for hot water
Volute pumps for hot water ZLI 25-125... 80-200 TECHNICAL DATA output: max. 140 m³/h delivery head: max. 60 m speed: max. 3600 1/min material: spheroidal graphite iron temperature: max. 150 C casing pressure:
More informationVolute Casing Pumps LSN. according to iso 2828 / iso Jansen Pompentechniek T: +31(0) E:
Volute Casing Pumps LSN according to iso 2828 / iso 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More informationTP /2-A-F-A-BQQE 400D 50HZ
GRUNDFOS DATA BOOKLET TP 65-46/2-A-F-A-BQQE 4D 5HZ Grundfos Pump 9687526 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9687526/tp-65-46-2-a-f-a-bqqe.html
More informationStory of 3 R s. Pum pen Intel 1 ligen z
Story of 3 R s Pum pen Intel 1 ligen z Various Standard for End Suction Pumps Pum pen Intel 2 ligen z Comparison of ET & NL Options ET NL MoC Beyond Cat A & B Yes No MoC Variants within Cat A & B Yes No
More informationSUGGESTED SPECIFICATIONS
PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationGeneral. Shaft Seal. Nozzle Orientations. Field of Application. Design. Drive. Bearings. Product Catalogue
Product Catalogue ETA C and D General The well-known ETA-pump on the bearing bracket C and D is constructed in accordance with DIN 24 255 standard and completes the performance range up to max. 100 m3/hr
More informationM Series. ASTM F 998 Marine Duty Pumps For Flows to 5,000 GPM
M Series ASTM F 998 Marine Duty Pumps For Flows to 5,000 GPM The M Series The M Series is Carver s end suction pump for handling freshwater, seawater, and light hydrocarbons in commercial marine and naval
More informationBEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-2000/00 [09-2010] BEV Deep well vertical pumps 1. Fields of Application BEV are vertical multistage centrifugal pumps designed for deep well, ditches and tanks to pump clean liquids
More information50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.
Performance curves 50 Hz [m] 11,6 data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s Head Tolerances acc. ISO 9906 Annex A 11,2 10,8 10,4 10 9,6 9,2 8,8 8,4 8 7,6 7,2 6,8 6,4 6 5,6
More information