2015 CONTROLLER PRICE LIST Products / Spare Parts / Accessories

Transcription

1 W A L C H E M IWAKI America Inc. Controller Price List 2015 CONTROLLER PRICE LIST Products / Spare Parts / Accessories Five Boynton Road Hopping Brook Park Holliston, MA USA TEL: FAX: WEB:

2 WATER TREATMENT ph/orp - CONDUCTIVITY SPECIALTY/ PLATING ACCESSORIES SECTION 1 COOLING TOWER/BOILER WATER... 1 WMT8 Cooling Tower Conductivity Controller... 1 WMD8 Dual Tower Conductivity Controller... 3 WMB8 Boiler Conductivity Controller... 6 WM18 Mixed Purpose Cooling Tower/Boiler Controller... 8 WCT600 Series Cooling Tower Controllers...14 WBL600 Series Boiler Controllers...16 WCTW100 Series Bleed & Feed Cooling Tower Controllers...21 WBLW100 Series Boiler Controllers...21 WCT400 Series Bleed & Feed Cooling Tower Controllers...24 WCT410 Series Bleed & Feed Cooling Tower Controller with Biocide Timers...24 WDT400 Series Dual Tower Bleed & Feed Controllers...27 WDT410 Bleed & Feed Cooling Tower Controller with Biocides, ph or ORP...28 WECT400 Bleed & Feed Cooling Tower Controllers w/econd Sensor...32 WECT410 Bleed & Feed Cooling Tower Controller w/biocides, Econd Sensor...32 WEDT410 Bleed & Feed Cooling Tower Controller, Biocides, Econd, ph/orp...33 WBL400 Series Bleed & Feed Boiler Controller...36 WBL410 Series Bleed & Four Feed Boiler Controller...36 WCM400 Series Condensate Monitor...37 WDB400 Series Bleed & Feed Dual Boiler Controller...39 WDC400 Series Dual Input Condensate Monitor...39 SECTION II GENERAL INDUSTRIAL Process Monitors WebAlert Series Process Monitor...41 ph/orp/conductivity/disinfection WIND Industrial Water Controller...42 WPH600 Series ph/orp Controllers...51 WDS600 Series Disinfection Controllers...52 WCN600 Series Conductivity Controllers...53 WCNP100 1/4 DIN Panel Mount Conductivity, ph/orp, Disinfection...58 WPHBP100 1/4 DIN Panel Mount Non-Preamplified ph/orp with BNC...58 WPHNP100 1/4 DIN Panel Mount Non-Preamplified ph/orp without BNC...58 WCNW100 Generic Conductivity Controllers...59 WDSW100 Disinfection Controllers...60 WPHPW100 ph/orp Controllers...61 WPHBW100 Non-Amplified ph/orp Controllers with BNC...62 WPHNW100 Non-Amplified ph/orp Controllers without BNC...62 WDIS400 Series Disinfection Controller...66 WPH410/420 Series ph/orp Controllers...70 WDP410/420/440 Series Dual Input ph/orp Controllers...73 WEC410 Series Electrodeless Conductivity Controller...76 WDEC410 Series Dual Input Electrodeless Conductivity Controller...77 WEL Series ph/orp Electrodes...80

3 WDS Series ph/orp Electrodes...82 Specialty ph/orp Electrodes & Accessories...83 SECTION III SPECIALTY/PLATING CONTROLLERS WNI410 Series Electroless Nickel Controllers...84 WCU410 Series Microetch/Electroless Copper Controllers...87 SECTION IV WALCHEM ACCESSORY PRODUCTS WFM Series Water Meter Contactors...89 WFP Series Paddlewheel Flowmeters...90 Cooling Tower Accessories...91 Boiler Accessories...91 SECTION V PARTS & ACCESSORIES BY PART NUMBER SECTION VI PARTS & ACCESSORIES BY DESCRIPTION

4 SECTION 1 COOLING TOWER/BOILER WATER WMT8 Cooling Tower Conductivity Controller WebMaster WMT 8 - SYSTEM COND SENSOR ph/orp SENSORS MAKEUP COND SENSOR VOLTAGE CODE FLOW SWITCH OPTION ANALOG OUTPUTS INPUT OPTIONS DIGITAL COMMS HARDWARE DIGITAL COMMS SOFTWARE PART # / CODE DESCRIPTION PRICE (adder) WMT8 Multi I/O Cooling Tower Controller $2, SYSTEM CONDUCTIVITY SENSOR 0 No system conductivity sensor n/c 1 Conductivity, contacting, PP/Graphite electrode 140 psi Conductivity, electrodeless, CPVC, 140 psi Conductivity, contacting, PP/stainless electrode, 140 psi Conductivity, contacting, 300 psi at 140 F PH/ORP SENSORS 0 No ph/orp sensors n/c 1 ph sensor, flat surface, 100 psi ORP sensor, rod style, 100 psi Both ph (flat) and ORP (rod style) sensors, 100 psi 1, ph sensor, bulb style, high pressure, 300 psi ORP sensor, high pressure, 300 psi Both ph and ORP sensors, high pressure, 300 psi 1, MAKEUP CONDUCTIVITY SENSOR 0 No makeup conductivity sensor n/c 1 Conductivity, contacting, PP/Graphite electrode 140 psi Conductivity, electrodeless, CPVC, 140 psi Conductivity, contacting, PP/stainless electrode, 140 psi Conductivity, contacting, 300 psi at 140 F VOLTAGE CODE 0 Prewired w/ USA power cord, 0 powered relays, 8 dry contact relays Prewired w/ USA cords, 7 powered relays, 1 dry contact relay Prewired w/ USA cords, 8 powered relays Prewired w/ USA cords, 4 powered relays, 4 dry contact relays Hardwired, 0 powered relays, 8 dry contact relays n/c 5 Hardwired, 8 powered relays n/c 6 Hardwired, 7 powered relays, 1 dry contact relay n/c 7 Hardwired, 4 powered relays, 4 dry contact relays n/c FLOW SWITCH OPTION N No flow switch, in-line sensors n/c L Loose flow switch manifold, 20 ft. cable, low pressure P Flow switch manifold on PP panel, 5 ft. cable, low pressure S No flow switch, Submersion sensors n/c F Loose flow switch manifold, 4 ft. cable, high pressure H Flow switch manifold on PP panel, 4 ft. cable, high pressure C Flow switch manifold on PP panel, 5 ft. cable, low pressure + Corrater with probe & tee no tips. (Requires optional Analog Input card) 4, D Flow switch manifold on PP panel, 5 ft. cable, low pressure + Little Dipper 2 PTSA sensor (Requires optional Analog Input card) 2, E Flow switch manifold on PP panel, 5 ft. cable, low pressure + Corrater with probe & tee no tips, Little Dipper 2 PTSA sensor (Requires optional Analog Input card) 6, B15 Jan 2015

5 WMT8 Cooling Tower Controller continued WebMaster WMT 8 - SYSTEM COND SENSOR ph/orp SENSORS MAKEUP COND SENSOR VOLTAGE CODE FLOW SWITCH OPTION ANALOG OUTPUTS INPUT OPTIONS DIGITAL COMMS HARDWARE DIGITAL COMMS SOFTWARE PART # / CODE DESCRIPTION PRICE (adder) ANALOG OUTPUTS N None n/c 1 one 4-20 ma output board Two 4-20 ma output boards Three 4-20 ma output boards Four 4-20 ma output boards INPUT OPTIONS N None n/c A Analog Input board (8 Inputs) D Digital Input board (6 Inputs) B Both Analog and Digital Input boards DIGITAL COMMS HARDWARE (USB AND ETHERNET ARE STANDARD) N No additional communications capability n/c M Modem card G 3G Cellular Modem card (requires VTouch activation) DIGITAL COMMS SOFTWARE (USB AND ETHERNET ARE STANDARD) N No additional capability n/c 1 Ethernet Networking (Master Capability) Modbus TCP Ethernet Networking (Master Capability) + Modbus TCP 1, B15 Jan 2015

6 WebMaster WMD8 Dual Tower Conductivity Controller WMD 8 - COND SENSOR Tower 1 SECOND SENSOR Tower 1 COND SENSOR Tower 2 SECOND SENSOR Tower 2 VOLTAGE CODE FLOW SWITCH OPTION ANALOG OUTPUTS INPUT OPTIONS DIGITAL COMMS HARDWARE DIGITAL COMMS SOFTWARE PART # / CODE DESCRIPTION PRICE (adder) WMD8 Multi I/O Dual Tower Controller $2, TOWER 1 SYSTEM CONDUCTIVITY SENSOR 0 No system conductivity sensor n/c 1 Conductivity, contacting, PP/Graphite electrode 140 psi Conductivity, electrodeless, CPVC, 140 psi Conductivity, contacting, PP/stainless electrode, 140 psi Conductivity, contacting, 300 psi at 140 F TOWER 1-2 ND SENSOR 0 No sensor n/c 1 ph sensor, flat surface, 100 psi ORP sensor, rod style, 100 psi ph sensor, bulb style, high pressure, 300 psi ORP sensor, rod style, high pressure, 300 psi Conductivity, contacting, PP/Graphite electrode, makeup water or closed loop Conductivity, contacting, 300 psi at 140 F, makeup water or closed loop; psi at 392 F TOWER 2 SYSTEM CONDUCTIVITY SENSOR 0 No system conductivity sensor n/c 1 Conductivity, contacting, PP/Graphite electrode 140 psi Conductivity, electrodeless, CPVC, 140 psi Conductivity, contacting, PP/stainless electrode, 140 psi Conductivity, contacting, 300 psi at 140 F TOWER 2-2 ND SENSOR 0 No sensor n/c 1 ph sensor, flat surface, 100 psi ORP sensor, rod style, 100 psi ph sensor, bulb style, high pressure, 300 psi ORP sensor, rod style, high pressure, 300 psi Conductivity, contacting, PP/Graphite electrode, makeup water or closed loop Conductivity, contacting, 300 psi at 140 F, makeup water or closed loop; psi at 392 F B15 Jan 2015

7 WMD8 Dual Tower Controller continued WebMaster WMD 8 - COND SENSOR Tower 1 SECOND SENSOR Tower 1 COND SENSOR Tower 2 SECOND SENSOR Tower 2 VOLTAGE CODE FLOW SWITCH OPTION ANALOG OUTPUTS INPUT OPTIONS DIGITAL COMMS HARDWARE DIGITAL COMMS SOFTWARE PART # / CODE DESCRIPTION PRICE (adder) VOLTAGE CODE 0 Prewired w/ USA power cord, 0 powered relays, 8 dry contact relays Prewired w/ USA cords, 7 powered relays, 1 dry contact relay Prewired w/ USA cords, 8 powered relays Prewired w/ USA cords, 4 powered relays, 4 dry contact relays Hardwired, 0 powered relays, 8 dry contact relays n/c 5 Hardwired, 8 powered relays n/c 6 Hardwired, 7 powered relays, 1 dry contact relay n/c 7 Hardwired, 4 powered relays, 4 dry contact relays n/c FLOW SWITCH OPTION N No flow switch, in-line sensors n/c L Loose flow switch manifold, 20 ft. cable, low pressure P Flow switch manifold on PP panel, 5 ft. cable, low pressure S No flow switch, Submersion sensors n/c F Loose flow switch manifold, 4 ft. cable, high pressure H Flow switch manifold on PP panel, 4 ft. cable, high pressure * Both Towers get the same flow switch option. At least one sensor per manifold must be ordered. * If both sensors for a tower are conductivity, only sensor 1 is connected to the flow switch manifold, the other is assumed to be for makeup or closed loop. only one manifold on a panel. ANALOG OUTPUTS N None n/c 1 One 4-20 ma output board Two 4-20 ma output boards Three 4-20 ma output boards Four 4-20 ma output boards INPUT OPTIONS N None n/c A Analog Input board (8 Inputs) D Digital Input board (6 Inputs) B Both Analog and Digital Input boards DIGITAL COMMS HARDWARE (USB AND ETHERNET ARE STANDARD) N No additional communications capability n/c M Modem card G 3G Cellular Modem card (requires VTouch activation) DIGITAL COMMS SOFTWARE (USB AND ETHERNET ARE STANDARD) N No additional capability n/c 1 Ethernet Networking (Master Capability) Modbus TCP Ethernet Networking (Master Capability) + Modbus TCP 1, B15 Jan 2015

8 WMT/WMD Accessories PART # / CODE DESCRIPTION PRICE Filter, Mains Power, 20 Amp Add-on Kits Kit, ph, Add-on, 5 ft. cable Kit, ph, Add-on, 20 ft. cable Kit, ORP, Add-on, 5 ft. cable Kit, ORP, Add-on, 20 ft. cable Kit, Contacting Conductivity, Add-on, 20 ft. for makeup Kit, Electrodeless Conductivity, Add-on, 20 ft. cable Kit, Free Chlorine/Bromine, ext ph range, 20 ppm, Add-on, 20 ft. cable 2, Kit, Free Chlorine/Bromine, ext ph range, 20 ppm, Add-on w/manifold, 20 ft cable 2, Kit, Chlorine Dioxide, 20 ppm, Add-on, 20 ft. cable 2, Kit, Chlorine Dioxide, 20 ppm, Add-on w/manifold, 20 ft. cable 2, Kit, GPRS 3G Modem w/antenna, Cables, Hardware Extension Cables Cable, 3 twisted pair shielded (ph, ORP or Conductivity) 2.10/ft Cable, 2 wire (flow switch) 0.66/ft Cable, 1 Pair, Shielded, 22 AWG (watermeter) 1.00/ft Cable, 3 conductor for Hall Effect water meters and paddlewheel 0.88/ft Junction Box Calibration Standards Buffer, ph 4, pint Buffer, ph 7, pint Buffer, ph 10, pint Quinhydrone, 20 grams Calibration kit, ORP Calibration Standard, PTSA, 1L B15 Jan 2015

9 WMB8 Boiler Conductivity Controller WebMaster WMB 8 - BOILER #1 COND SENSOR BOILER #2 COND SENSOR BOILER #3 COND SENSOR BOILER #4 COND SENSOR VOLTAGE CODE ANALOG OUTPUTS INPUT OPTIONS DIGITAL COMMS HARDWARE DIGITAL COMMS SOFTWARE PART # / CODE DESCRIPTION PRICE (adder) WMB8 Multi I/O Boiler Controller $2, BOILER #1 CONDUCTIVITY SENSOR 0 No conductivity sensor n/c 1 Contacting electrode, 250 psi, cable sold separately BOILER #2 CONDUCTIVITY SENSOR 0 No conductivity sensor n/c 1 Contacting electrode, 250 psi, cable sold separately BOILER #3 CONDUCTIVITY SENSOR 0 No conductivity sensor n/c 1 Contacting electrode, 250 psi, cable sold separately BOILER #4 CONDUCTIVITY SENSOR 0 No conductivity sensor n/c 1 Contacting electrode, 250 psi, cable sold separately VOLTAGE CODE Prewired w/ USA power cord, 0 powered relays, 8 dry contact relays Prewired w/ USA cords, 7 powered relays, 1 dry contact relay Prewired w/ USA cords, 8 powered relays Prewired w/ USA cords, 4 powered relays, 4 dry contact relays Hardwired, 0 powered relays, 8 dry contact relays n/c 5 Hardwired, 8 powered relays n/c 6 Hardwired, 7 powered relays, 1 dry contact relay n/c 7 Hardwired, 4 powered relays, 4 dry contact relays n/c ANALOG OUTPUTS N None n/c 1 One 4-20 ma output board Two 4-20 ma output boards Three 4-20 ma output boards Four 4-20 ma output boards INPUT OPTIONS N None n/c A Analog Input board (8 Inputs) D Digital Input board (6 Inputs) B Both Analog and Digital Input boards B15 Jan 2015

10 WMB Boiler Controller continued WebMaster WMB 8 - BOILER #1 COND SENSOR BOILER #2 COND SENSOR BOILER #3 COND SENSOR BOILER #4 COND SENSOR VOLTAGE CODE ANALOG OUTPUTS INPUT OPTIONS DIGITAL COMMS HARDWARE DIGITAL COMMS SOFTWARE PART # / CODE DESCRIPTION PRICE (adder) DIGITAL COMMS HARDWARE (USB AND ETHERNET ARE STANDARD) N No additional communications capability n/c M Modem card G 3G Cellular card (requires VTouch activation) DIGITAL COMMS SOFTWARE (USB AND ETHERNET ARE STANDARD) N No additional capability n/c 1 Ethernet Networking (Master Capability) Modbus TCP Ethernet Networking (Master Capability) + Modbus TCP 1, WMB Accessories Filter, Mains Power, 20 Amp Add-on Kits Kit, Boiler Conductivity Add-on Extension Cables Cable, 3 twisted pair shielded (Conductivity, ph or ORP) 2.10/ft Cable, 2 wire (flow switch) 0.66/ft Cable, 1 Pair, Shielded, 22 AWG (watermeter) 1.00/ft Cable, 3 conductor for Hall Effect water meters and paddlewheel 0.88/ft Junction Box B15 Jan 2015

11 WM18 Mixed Purpose Cooling Tower/Boiler Controller WebMaster WM18 - SENSOR INPUTS VOLTAGE CODE ANALOG OUTPUTS INPUT OPTIONS DIGITAL COMMS HARDWARE DIGITAL COMMS SOFTWARE PART # / CODE DESCRIPTION PRICE (adder) WM18 Multi I/O Mixed Purpose Controller $2, SENSOR INPUTS REQUIRED 1 One sensor input n/c 2 Two sensor inputs Three sensor inputs Four sensor inputs Note: All sensors and flow switch manifolds must be purchased separately. See Sensor Options for WM18. VOLTAGE CODE 0 Prewired w/ USA power cord, 0 powered relays, 8 dry contact relays Prewired w/ USA cords, 7 powered relays, 1 dry contact relay Prewired w/ USA cords, 8 powered relays Prewired w/ USA cords, 4 powered relays, 4 dry contact relays Hardwired, 0 powered relays, 8 dry contact relays n/c 5 Hardwired, 8 powered relays n/c 6 Hardwired, 7 powered relays, 1 dry contact relay n/c 7 Hardwired, 4 powered relays, 4 dry contact relays n/c ANALOG OUTPUTS N None n/c 1 One 4-20 ma output board Two 4-20 ma output boards Three 4-20 ma output boards Four 4-20 ma output boards INPUT OPTIONS N None n/c A Analog Input board (8 Inputs) D Digital Input board (6 Inputs) B Both Analog and Digital Input boards DIGITAL COMMS HARDWARE (USB AND ETHERNET ARE STANDARD) N No additional communications capability n/c M Modem card G 3G Cellular modem card (requires VTouch activation) DIGITAL COMMS SOFTWARE (USB AND ETHERNET ARE STANDARD) N No additional capability n/c 1 Ethernet Networking (Master Capability) Modbus TCP Ethernet Networking (Master Capability) + Modbus TCP 1, B15 Jan 2015

12 Sensor and Flow Switch Manifold Options for WM18 The first step is to select your sensors. If the sensor will be installed in a flow switch manifold on a panel, select from the list of sensors under Panel Mounted Flow Switch Manifold Sensor Options, as these sensors do not include the in-line mounting hardware. If the sensor will be mounted in-line, select from the sensors under In-Line Mounted Sensor Options. If the sensor will be mounted in a submersion application or in a loose manifold, select from the sensors under Submersion Mounted or Loose Flow Switch Manifold Sensor Options. The second step is to select the flow switch manifold (if required) to use with your sensors. Loose Flow Switch Manifold Options are intended for use with Submersion Mounted Sensor Options with 20 ft. cables. Panel Mounted Manifold Options are intended for use with Panel Mounted Flow Manifold Sensor Options with 5 ft. cables. Please note that for each controller, only one manifold may be mounted on a panel next to the controller. Cables are available in 5 ft. (1.6m) or 20 ft. (6.1m) lengths. Order extension cable and junction box for longer runs. Boiler and high pressure cooling tower conductivity sensor assemblies include a preamp and junction box. Cable must be ordered separately (p/n ). Maximum Cable Lengths ph and ORP: 1000 ft. (305m) Conductivity: 250 ft. (76m) Sensor Options for Panel Mounted Flow Switch Manifolds (no in-line mounting hardware) Price ph ph, flat, 5 ft. cable, no tee, w/temp comp ph, high pressure, 10 ft. cable, in-line, with preamp ORP ORP, rod style, 5 ft. cable, no tee ORP, high pressure, 10 ft. cable, in-line, with preamp Contacting Conductivity (0-10,000µS/cm) Contacting, PP/Graphite, 5 ft. cable, no tee Contacting, PP/stainless, 5 ft. cable, no tee Contacting, 300 psi, no cable (high pressure tower) with preamp and j-box Electrodeless Conductivity (50-10,000µS/cm) Electrodeless, 5 ft. cable, no tee, CPVC In-Line Mounted Sensor Options (includes in-line mounting hardware) ph WEL-PHF-12 ph, flat, 20 ft. cable, in-line ORP WEL-MVR-22 ORP, rod style, 20 ft. cable, in-line Contacting Conductivity (0-10,000µS/cm) Contacting, PP/graphite, 20 ft. cable, in-line or submersion Contacting, PP/stainless, 20 ft. cable, in-line or submersion Contacting, 250 psi, no cable (boiler) with preamp and j-box Contacting, 300 psi, no cable (high pressure tower) with preamp and j-box Electrodeless Conductivity (50-10,000µS/cm) Electrodeless, 20 ft. cable, in-line w/mtg adapter with tee, CPVC Disinfection WFCXB-20 Free Chlorine/Bromine, ext.ph range, 20 ft. cable, with flow cell 1, WCDB-20 Chlorine Dioxide, 20 ft. cable, with flow cell 1, B15 Jan 2015

13 Submersion Mounted or Loose Flow Switch Manifold Sensor Options ph PRICE WEL-pHF-11 ph, flat, 20 ft. cable, submersion ORP WEL-MVR-21 ORP, rod style, 20 ft. cable, submersion Contacting Conductivity (0-10,000µS/cm) Contacting, PP/graphite, 20 ft. cable, in-line or submersion Contacting, PP/stainless, 20 ft. cable, in-line or submersion Electrodeless Conductivity (50-10,000µS/cm) Electrodeless, 20 ft. cable, no mtg adapter, CPVC Disinfection (in-line only) Free Chlorine/Bromine, ext. ph range, 20 ppm, 20 ft.cable, no mtg hardware 1, Chlorine Dioxide, 20 ppm, 20 ft.cable, no mtg hardware 1, Loose Flow Switch Manifold Options For one sensor per manifold: Low pressure conductivity High pressure conductivity, 4 ft cable Low pressure electrodeless conductivity Disinfection For two sensors per manifold: Low pressure contacting conductivity + ph/orp High pressure contacting conductivity + high pressure ph/orp, 4 ft cable Low pressure electrodeless conductivity + ph/orp For three sensors per manifold: Low pressure contacting conductivity + two ph/orp High pressure contacting conductivity + two high pressure ph/orp, 4 ft cable 1, Low pressure electrodeless conductivity + two ph/orp Panel Mounted Manifold Options: For one sensor per manifold: Low pressure contacting conductivity on Polypro panel High pressure contacting conductivity on Polypro panel Low pressure electrodeless conductivity on Polypro panel Disinfection (note: WebMaster does not mount on panel with this manifold) For two sensors per manifold: Low pressure conductivity + ph/orp on Polypro panel High pressure contacting conductivity + high pressure ph/orp on Polypro panel 1, Low pressure electrodeless conductivity + ph/orp on Polypro panel For three sensors per manifold: Low pressure contacting conductivity + two ph/orp on Polypro panel High pressure contacting conductivity + two high pressure ph/orp on Polypro panel 1, Low pressure electrodeless conductivity + two ph/orp on Polypro panel Extension Cable Cable, 3 twisted pair, shielded (ph, ORP, Conductivity) 2.10/ft Cable, 4 conductor (Disinfection) 0.78/ft Junction Box Junction Box B15 Jan 2015

14 Spare Parts for WMT8/WMD8/WMB8/WM18 PART # / CODE DESCRIPTION PRICE Circuit Boards ma Output Card, WebMaster Digital Input Card Analog Input Card Modem Card Sensor Input Card Power Supply, W Display, WebMaster Relay Card, 7 Powered, 1 dry Relay Card, 8 Powered Relay Card, 4 powered, 4 dry Relay Card, 6 powered, 2 dry Relay Card, 8 dry contact Core Interface Board Core, WM Spare Part, GPRS 3G Modem (Quad Band) Spare, Label/Panel Assembly, WMT/B/D/1 1, Fuses Fuse, F1, WebMaster, 1.6 amp Fuse, F2 and F3, WebMaster, 6.3 amp Pigtail, 120 VAC 5.70 Sensors & Preamplifiers WEL-PHF-NN Electrode, ph, Flat WEL-MVR-NN Electrode, ORP, Rod Electrode, ph, high pressure Electrode, ORP, high pressure, 10 ft cable Preamplifier Housing, ph/orp, No ATC, 20 ft. cable, for WEL Preamplifier Housing, ph/orp, No ATC, 5 ft. cable, for WEL Preamplifier Housing, ph/orp, ATC, 20 ft. cable, for WEL Preamp Housing, ph/orp, 5 ft. Cable, ATC Preamplifier, ph/orp, for high pressure electrodes Preamp, for high pressure contacting conductivity electrodes ( & ) Sensor, Contacting Conductivity, Active, PP/Graphite, 20 ft. cable Sensor, Electrodeless Conductivity, Active, CPVC, 10,000 µs/cm, 20 ft. cable Sensor, Contacting Conductivity, Boiler Sensor, Contacting Conductivity, Boiler w/j-box & preamp Sensor, Contacting Conductivity, high pressure tower, 300 psi Sensor, Contacting Conductivity, Active, PP/Stainless Steel, 20 ft. cable Sensor, Contacting Conductivity, Active, PP/Stainless Steel, 5 ft. cable Free Chlorine/Bromine sensor, ext. ph range, 20 ppm, no cable 1, Chlorine Dioxide sensor, 20 ppm, no cable 1, Electrode Mounting Parts Flow cell assembly, Chlorine/Bromine, Chlorine Dioxide Cable, disinfection sensors, 20 ft Nut, for low pressure sensor mounting O-Ring, FKM, for low pressure sensor mounting Tee, for low pressure sensor mounting B15 Jan 2015

15 PART # / CODE DESCRIPTION PRICE Elbow, for low pressure contacting conductivity sensors Gland, SS, High Temp/In-line (ph/orp) Adapter, in line, for electrodeless conductivity sensor Cross, ¾, Black iron, boiler Tee, ¾", Black iron, high pressure Flow Switch Parts Float, low pressure flow switch Switch, low pressure flow switch, 20 ft cable Switch Housing Assembly, 4 ft cable O-Ring, float retaining Flow switch, low pressure, complete Flow switch assembly, 20 ft. cable Flow switch, high pressure Sample Valve, low pressure Sample Valve, high pressure Flow Switch Body (Tee) Screw, 8-32 x 3/4 FH SS Nut, 8-32 Keps SS Hanger, Pipe, 36-39mm, Clic Hanger, Pipe, mm, Clic Nipple, 3/4" Close CPVC Schedule Panel, Mounting, 30" x 19" Panel, Mounting, 24 x Other Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Gland, Cable Insert, 5 hole x 5mm Ribbon Cable, WebMaster Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Housing, Switch Manifold, Little Dipper (Original), CCON F/S Manifold, Little Dipper 2, CCON F/S Power Cord, WebMaster, 15A Gland, Cable Insert, 6 Hole x 4mm CD, Software Support Truss, For GPRS Modem Cable WebMaster AC Input Cable WebMaster DC Output Tee, 1", Little Dipper (Original) Kit, Tee ¾", Nut & o-ring, Little Dipper Kit, Tee 1", Nut & o-ring, Little Dipper SMA Jack 10"Angled Plug SMA To FME Adapter B15 Jan 2015

16 Accessories Filter, Mains Power, 20 Amp Cable, USB, A to B, 10ft USB Flash drive Modbus Upgrade code Networking Master Upgrade code Antenna Cable Extension Assembly, 50' Antenna Cable Extension Assembly, 100' NYE Lubricant 760g, 1cc B15 Jan 2015

17 WCT600 Series Cooling Tower Controllers W600 WCT RELAYS/ WIRING INPUT CARDS ANALOG OUTPUTS ETHERNET SENSORS PART # / CODE DESCRIPTION PRICE (adder) WCT Cooling Tower Controller BASE $ RELAYS/WIRING 600H 6 powered relays, Hardwired n/c 600P 6 powered relays, Prewired with USA cords and pigtails D 6 powered relays, Prewired with DIN power cord, no pigtails H 2 powered 4 dry relays, Hardwired n/c 610P 2 powered 4 dry relays, Prewired with USA cord and 2 pigtails D 2 powered 4 dry relays, Prewired with DIN power cord, no pigtails H 2 opto 4 dry relays, Hardwired P 2 opto 4 dry relays, Prewired with USA cord and two 20 ft. pulse cables D 2 opto 4 dry relays, Prewired with DIN power cord, no pigtails H 4 opto 2 dry relays, Hardwired P 4 opto 2 dry relays, Prewired with USA cord and four 20 ft. pulse cables D 4 opto 2 dry relays, Prewired with DIN power cord, no pigtails INPUT CARDS NN No sensor input cards n/c SN One sensor input card SS Two sensor input cards AN One dual analog input card AA Two dual analog input cards SA One sensor input card and one analog input card ANALOG OUTPUTS N No analog outputs n/c A One dual isolated analog output card ETHERNET N No Ethernet n/c E Ethernet card SENSORS NN No sensor n/c AN Inline graphite contacting conductivity BN Graphite contacting conductivity + Flow Switch manifold on panel CN High pressure contacting conductivity DN High pressure contacting conductivity + Flow Switch manifold on panel 1, EN Inline 316SS contacting conductivity FN 316SS contacting conductivity + Flow Switch manifold on panel GN Inline electrodeless conductivity HN Electrodeless conductivity + Flow Switch manifold on panel BA Graphite contacting conductivity + Flow Switch manifold on panel + WEL-PHF no ATC BB Graphite contacting conductivity + Flow Switch manifold on panel + WEL-MVR no ATC BC Graphite contacting conductivity + Flow Switch manifold on panel + WEL-MVF no ATC BD Graphite contacting conductivity + Flow Switch manifold on panel + Little Dipper 2 2, FA 316SS contacting conductivity + Flow Switch manifold on panel + WEL-PHF no ATC FB 316SS contacting conductivity + Flow Switch manifold on panel + WEL-MVR no ATC FC 316SS contacting conductivity + Flow Switch manifold on panel + WEL-MVF no ATC FD 316SS contacting conductivity + Flow Switch manifold on panel + Little Dipper 2 2, B15 Jan 2015

18 DE High pressure contacting conductivity + Flow Switch manifold on panel + ph & , DF High pressure contacting conductivity + Flow Switch manifold on panel + ORP & , HA Electrodeless conductivity + Flow Switch manifold on panel + WEL-PHF no ATC 1, HB Electrodeless conductivity + Flow Switch manifold on panel + WEL-MVR no ATC 1, HC Electrodeless conductivity + Flow Switch manifold on panel + WEL-MVF no ATC 1, HD Electrodeless conductivity + Flow Switch manifold on panel + Little Dipper 2 2, B15 Jan 2015

19 WBL600 Series Boiler Controllers W600 WBL RELAYS/ WIRING INPUT CARDS ANALOG OUTPUTS ETHERNET SENSORS PART # / CODE DESCRIPTION PRICE (adder) WBL Boiler Controller BASE $ RELAYS/WIRING 600H 6 powered relays, Hardwired n/c 600P 6 powered relays, Prewired with USA cords and pigtails D 6 powered relays, Prewired with DIN power cord, no pigtails H 2 powered 4 dry relays, Hardwired n/c 610P 2 powered 4 dry relays, Prewired with USA cord and 2 pigtails D 2 powered 4 dry relays, Prewired with DIN power cord, no pigtails H 2 opto 4 dry relays, Hardwired P 2 opto 4 dry relays, Prewired with USA cord and two 20 ft. pulse cables D 2 opto 4 dry relays, Prewired with DIN power cord, no pigtails H 4 opto 2 dry relays, Hardwired P 4 opto 2 dry relays, Prewired with USA cord and four 20 ft. pulse cables D 4 opto 2 dry relays, Prewired with DIN power cord, no pigtails INPUT CARDS NN No sensor input cards n/.c SN One sensor input card SS Two sensor input cards AN One dual analog input card AA Two dual analog input cards SA One sensor input card and one analog input card ANALOG OUTPUTS N No analog outputs n/.c A One dual isolated analog output card ETHERNET N No Ethernet n/.c E Ethernet card SENSORS NN No sensor n/.c AN Boiler sensor with ATC, 250 psi, 1.0 cell constant, 20 ft. cable BN Boiler sensor without ATC, 250 psi, 1.0 cell constant, 20 ft. cable CN Condensate sensor with ATC, 200 psi, 0.1 cell constant, 10 ft. cable DN Boiler sensor with ATC, 250 psi, 10 cell constant, 20 ft. cable AA Two K=1.0 boiler sensors with ATC, 250 psi, 20 ft. cables BB Two K=1.0 boiler sensor without ATC, 250 psi, 20 ft. cables CC Two K=0.1 condensate sensors with ATC, 200 psi, 10 ft. cables DD Two K=10 Boiler sensors with ATC, 250 psi, 20 ft. cables 1, AB K=1.0 boiler sensor with ATC and K=1.0 boiler sensor without ATC, 250 psi, 20 ft. cables AC K=1.0 boiler sensor w/atc, 20 ft. and K=0.1 condensate sensor w/atc, 250 psi, 10 ft. cable AD K=1.0 boiler sensor with ATC and K=10 boiler sensor with ATC, 250 psi, 20 ft. cables 1, BC Boiler sensor without ATC, 20 ft. and condensate sensor with ATC, 10 ft. cable BD Boiler sensor without ATC and K=10 boiler sensor with ATC, 250 psi, 20 ft. cables CD Condensate sensor w/atc, 10 ft. cable and K=10 boiler sensor w/atc, 250 psi, 20 ft. cable 1, B15 Jan 2015

20 W600 Spare Parts W600 Sensors PART # / CODE DESCRIPTION PRICE Cooling Tower Conductivity Sensor, Contacting Conductivity, PP/Graphite, 20 ft. cable Sensor, Contacting Conductivity, PP/Graphite, 3 ft. cable Sensor, Contacting Conductivity, 300 psi, 10 ft. cable Sensor, Contacting Conductivity, PP/SS, 20 ft. cable Sensor, Contacting Conductivity, PP/SS, 3 ft. cable Sensor, Electrodeless Conductivity, CPVC, 20 ft. cable Sensor, Electrodeless Conductivity, CPVC, 3 ft. cable Boiler Conductivity Boiler sensor with ATC, 250 psi, 3/4"NPT, cell constant Boiler sensor without ATC, 250 psi, 3/4" NPT, cell constant Boiler sensor with ATC, 250 psi, 3/4"NPT, cell constant General Conductivity Sensor, Contacting Conductivity, Cell constant 0.01, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 0.1, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 1.0, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 10.0, no gland, 10 ft. cable Sensor, Electrodeless Conductivity, CPVC, 20 ft. cable Sensor, Electrodeless Conductivity, CPVC, 3 ft. cable Sensor, Electrodeless Conductivity, PEEK, 20 ft. cable Sensor, Electrodeless Conductivity, PEEK, 3 ft. cable ph/orp WEL-PHF-NN Electrode, ph, flat WEL-MVF-NN Electrode, ORP, flat WEL-MVR-NN Electrode, ORP, rod Preamp housing, no ATC, 20 ft. cable Preamp housing, no ATC, 3 ft. cable Preamp housing, Pt1000 ATC, 20 ft. cable Preamp housing, Pt1000 ATC, 3 ft. cable External preamplifier, ph/orp Disinfection Chlorine Dioxide Sensor, 2 ppm, no cable 1, Chlorine Dioxide Sensor, 20 ppm, no cable 1, Chlorine Dioxide Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine Sensor, 2 ppm, no cable 1, Free Chlorine/Bromine Sensor, 20 ppm, no cable 1, Free Chlorine/Bromine Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine Sensor, ext. ph range, 20 ppm, no cable 1, Hydrogen Peroxide, 20,000 ppm, no cable 2, B15 Jan 2015

21 PART # / CODE DESCRIPTION PRICE Hydrogen Peroxide, 200 ppm, no cable 2, Hydrogen Peroxide, 2000 ppm, no cable 2, Ozone Sensor, 2ppm, no cable 2, Ozone Sensor, 20 ppm, no cable 2, Peracetic Acid Sensor, 20,000 ppm, no cable 2, Peracetic Acid Sensor, 200 ppm, no cable 2, Peracetic Acid Sensor, 2000 ppm, no cable 1, Peracetic Acid Sensor, PEEK, 20,000 ppm, no cable 4, Peracetic Acid Sensor, PEEK, 2000 ppm, no cable 4, Total Chlorine Sensor, 20 ppm, no cable 1, Membrane Cap,2/20 ppm Chlorine Dioxide and 200/2,000 ppm Hydrogen Peroxide and 200/2,000 ppm Peracetic Acid (PVC body) Membrane Cap, 20,000 ppm Peracetic Acid (PVC body) and 20,000 ppm Hydrogen Peroxide Membrane Cap 2000/20,000 ppm, 200 ppm Chlorine Dioxide, Peracetic Acid (PEEK body) Membrane Cap, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Membrane Cap, 20 ppm Free Chlorine/Bromine (Ext ph range) and 20 ppm Total Chlorine Membrane Cap, 2 ppm Ozone Membrane Cap, 20 ppm Ozone Electrolyte, 100 ml, 2/20/200 ppm Chlorine Dioxide Electrolyte, 100 ml, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Electrolyte, 100 ml, 20 ppm Free Chlorine/Bromine (Ext. ph range) Electrolyte, 100 ml, 20 ppm Total Chlorine Electrolyte, 100 ml, 2/20 ppm Ozone Electrolyte, 100 ml, 200/2,000 Peracetic Acid (PVC body) and 2000/20,000 Peracetic Acid (PEEK body) Electrolyte, 100 ml, 20,000 ppm Peracetic Acid (PVC body) Electrolyte, 100 ml, 200/2,000/20,000 ppm Hydrogen Peroxide Membrane Cap Hose rings, QTY 10, for all caps except the standard free chlorine Cable, W100/600 disinfection, 3 ft Cable, W100/600 disinfection, 20 ft Fluorescent Little Dipper 2, PTSA, No Tee 1, Little Dipper 2, Fluorescein, No Tee 1, Sensor Mounting Hardware Nut, Inline Mounting Tee, 3/4" NPTF, Low Pressure contacting conductivity, ph/orp O-Ring, FKM, Low Pressure Sensor Mounting Tee assembly, CPVC electrodeless conductivity, 3/4" NPTF process connections Adapter, inline mounting of CPVC electrodeless conductivity, 2" NPTM Adapter, 316SS, inline mounting of PEEK electrodeless conductivity, 2" NPTM Flow cell with nut, o-ring, and washer kit, for most disinfection sensors B15 Jan 2015

22 PART # / CODE DESCRIPTION PRICE Flow cell, acrylic, for PEEK PAA sensors 1, Washer set, disinfection sensors O-Ring, disinfection sensors Gland, steel, 1/2" NPT, 200 psi, for sensors Gland, PP, 1/2" NPT, 100 psi, for sensors Flow Manifolds and Parts Flow switch manifold, contacting conductivity, 150 psi, 20 ft. cable Flow switch manifold, contacting conductivity, 150 psi, 3 ft. cable Flow switch manifold, contacting conductivity, 300 psi, 4 ft. cable Flow switch manifold, ph/orp, 100 psi, 20 ft. cable Flow switch manifold, ph/orp, 100 psi, 3 ft. cable Flow switch manifold, electrodeless conductivity, 150 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity, 150 psi, 3 ft. cable Flow switch manifold, disinfection, 150 psi (flow switch)/15 psi (sensor), 20 ft. cable Flow switch manifold, disinfection, 150 psi (flow switch)/15 psi (sensor), 3 ft. cable Flow switch manifold, electrodeless conductivity + ph or ORP, 100 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity + ph or ORP, 100 psi, 20 ft. cable Flow switch manifold, contacting conductivity + ph or ORP, 100 psi, 20 ft. cable Flow switch manifold, contacting conductivity + ph or ORP, 100 psi, 3 ft. cable Flow switch manifold, contacting conductivity + Little Dipper 2, 100 psi, 20 ft. cable Flow switch manifold, contacting conductivity + Little Dipper 2, 100 psi, 3 ft. cable Flow switch manifold, disinfection + ph ORP or tower contacting conductivity 100 psi (flow switch)/15 psi (dis. sensor), 20 ft. cable Flow switch manifold, disinfection + ph ORP or tower contacting conductivity, 100 psi (flow switch)/15 psi (dis. sensor), 3 ft. cable Flow switch manifold, electrodeless conductivity + Little Dipper 2, 100 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity + Little Dipper 2, 100 psi, 3 ft. cable Flow switch manifold, dual ph/orp, 100 psi, 20 ft. cable Flow switch manifold, dual ph/orp, 100 psi, 3 ft. cable Flow switch (complete), low pressure, 20 ft. cable Flow switch (complete), low pressure, 3 ft. cable Switch & Float assembly, low pressure, 20 ft. cable Switch & Float assembly, low pressure, 3 ft. cable Float, low pressure flow switch Reed switch, low pressure flow switch, 20 ft. cable Reed switch, low pressure flow switch, 3 ft. cable O-ring, float retaining, low pressure flow switch Sample valve, low pressure manifold Flow Switch Body (Tee), low pressure flow switch Flow switch, high pressure Sample valve, high pressure Hanger, pipe, mm, CLIC Screw, 10-32, 5/8" long B15 Jan 2015

23 PART # / CODE DESCRIPTION PRICE Panel, 11.8" x 13" Panel, 11.8" x 22.5" Tee, 3/4"NPT, black iron Panel, 19" x 24" Hanger, pipe, mm CLIC Hanger, pipe, 28 mm, CLIC Rotameter Valve, 1/4" x 1/4" Washer set Clip ring O-ring, washer 1.20 Circuit Boards Spare, front panel, W Spare, sensor board, W Spare, analog input, W Spare, analog output, W Spare, Ethernet board, W Spare, power relay board, 6P/0D, W Spare, power relay board, 2P/4D, W Spare, power relay board, 2O/4D, W Spare, power relay board, 4O/2D, W Fuses Fuse, 6.3 A, powered relay models only 3.70 Misc Controller Parts Power switch Safety cover, W Ribbon cable, W Cable, W600 power switch Power cord Pigtail Locknut, 3/4" Strain relief, 1 hole insert, Ethernet Strain relief, 1 hole insert, Power cord Strain relief, 1 hole insert, Sensor Strain relief, 3 hole insert, pigtails Strain relief, 6 hole insert, DI Strain relief, 3 hole insert, AO 6.00 Cable Extension Junction box Cable, 1 Pair, Shielded, 22 AWG (to extend watermeter cables) $1.00/ft Cable, 4 conductor with shield (to extend contacting conductivity sensor cables) $0.78/ft Cable, 3 twisted pair, shielded, 24 AWG (to extend ph/orp, Disinfection) $2.10/ft Cable, 1 pair, unshielded (to extend flow switch cables) $0.66/ft Cable, 3 twisted pair, 2 shields, 22 AWG (to extend electrodeless conductivity sensor cables) $1.40/ft B15 Jan 2015

24 WCTW100 Series Bleed & Feed Cooling Tower Controllers W100W WCTW - RELAYS/ WIRING ANALOG OUTPUT SENSORS PART # / CODE DESCRIPTION PRICE (adder) WCTW Cooling Tower Controller Bleed & Feed $ RELAYS/WIRING 100H 3 powered relays, Hardwired n/c 100P 3 powered relays, Prewired with USA cords and pigtails D 3 powered relays, Prewired with DIN power cord, no pigtails H 3 dry relays, Hardwired n/c 110P 3 dry relays, Prewired with USA power cord, no pigtails D 3 dry relays, Prewired with DIN power cord, no pigtails ANALOG OUTPUTS N No analog output n/c A One isolated analog output SENSORS N No sensor n/c A Inline graphite contacting conductivity w/ tee, 20 ft cable prewired B Graphite contacting conductivity + Flow Switch manifold on panel, prewired C 300 psi contacting conductivity, 4 ft cable prewired, no tee D 300 psi contacting conductivity + Flow Switch manifold on panel, prewired 1, E Inline 316SS contacting conductivity w/ tee, 20 ft cable prewired F 316SS contacting conductivity + Flow Switch manifold on panel, prewired G Inline electrodeless conductivity w/ tee, 20 ft cable prewired H Electrodeless conductivity + Flow Switch manifold on panel, prewired WBLW100 Series Boiler Controllers WBLW - RELAYS/ WIRING ANALOG OUTPUT SENSORS PART # / CODE DESCRIPTION PRICE (adder) WBLW Cooling Tower Controller Bleed & Feed RELAYS/WIRING 100H 3 powered relays, Hardwired n/c 100P 3 powered relays, Prewired with USA cords and pigtails D 3 powered relays, Prewired with DIN power cord, no pigtails H 3 dry relays, Hardwired n/c 110P 3 dry relays, Prewired with USA power cord, no pigtails D 3 dry relays, Prewired with DIN power cord, no pigtails ANALOG OUTPUTS N No analog output n/c A One isolated analog output SENSORS N No sensor n/c A Boiler with ATC, no tee, 250 psi, 20 ft cable prewired B Boiler without ATC, no tee, 250 psi, 20 ft cable prewired C Condensate w/ ATC (cell constant 0.1), no tee, 200 psi, 10 ft cable prewired D Boiler w/ ATC, 100 ms/cm (cell constant 10), no tee, 250 psi, 20 ft cable prewired B15 Jan 2015

25 Spare Parts for WCTW100 and WBLW100 W100W PART # / CODE DESCRIPTION PRICE $$ Sensors Cooling Tower Sensor, Contacting Conductivity, WCTW1, PP/Graphite, 20 ft. cable Sensor, Contacting Conductivity, WCTW1, PP/Graphite, 3 ft. cable Sensor, Contacting Conductivity, WCTW1, 300 psi, 10 ft. cable Sensor, Contacting Conductivity, WCTW1, PP/SS, 20 ft. cable Sensor, Contacting Conductivity, WCTW1, PP/SS, 3 ft. cable Sensor, Electrodeless Conductivity, WCNW1/WCTW1, CPVC, 20 ft. cable Sensor, Electrodeless Conductivity, WCNW1/WCTW1, CPVC, 3 ft. cable Boiler Boiler sensor with ATC, 250 psi, 3/4"NPT, cell constant Boiler sensor without ATC, 250 psi, 3/4" NPT, cell constant Boiler sensor with ATC, 250 psi, 3/4"NPT, cell constant Sensor, Contacting Conductivity, WCNW1, Cell constant 0.1, no gland, 10 ft. cable Sensor Mounting Hardware Nut, Inline Mounting Tee, 3/4" NPTF, Low Pressure contacting conductivity, ph/orp O-Ring, FKM, Low Pressure Sensor Mounting Tee assembly, CPVC electrodeless conductivity, 3/4" NPTF process connections Adapter, inline mounting of CPVC electrodeless conductivity, 2" NPTM Gland, steel, 1/2" NPT, 200 psi, for sensors Flow Manifolds and Parts Flow switch manifold, contacting conductivity, 150 psi, 20 ft cable Flow switch manifold, contacting conductivity, 150 psi, 3 ft cable Flow switch manifold, contacting conductivity, 300 psi, 4 ft cable Flow switch manifold, electrodeless conductivity, 150 psi, 20 ft cable Flow switch manifold, electrodeless conductivity, 150 psi, 3 ft cable Flow switch (complete), low pressure, 20 ft cable Flow switch (complete), low pressure, 3 ft cable Switch & Float assembly, low pressure, 20 ft cable Switch & Float assembly, low pressure, 3 ft cable Float, low pressure flow switch Reed switch, low pressure flow switch, 20 ft cable Reed switch, low pressure flow switch, 3 ft cable O-ring, float retaining, low pressure flow switch Sample valve, low pressure manifold Flow Switch Body (Tee), low pressure flow switch Flow switch, high pressure Sample valve, high pressure Hanger, pipe, mm, CLIC Screw, 10-32, 5/8" long Panel, 11.8" x 13" Panel, 11.8" x 22.5" Tee, 3/4"NPT, black iron Panel, 19" x 24" B15 Jan 2015

26 Circuit Boards FPA, WCTW1, WBLW1, WCNW1 no AO FPA, WCTW1, WBLW1, WCNW1 with AO Power relay board, W100, 3 powered, non-passive Power relay board, W110, 3 dry, non-passive Fuses Fuse, 6.3 A, powered relay models (W100) only 3.70 Miscellaneous Controller Parts Ribbon cable Safety cover, W Power switch, W Cable, W100 Power switch Power cord, W Pigtail, W Strain relief, 3 hole insert, 3/4" NPT Locknut, 3/4" Strain relief, 3 hole insert, small Strain relief, 1 hole insert, small 5.00 Cable Extension Junction box Cable, for and sensors, 20ft Cable, 1 Pair, Shielded, 22 AWG (to extend watermeter cables) $1.00/ft Cable, 4 conductor with shield (to extend contacting conductivity sensor cables) $0.78/ft Cable, 1 pair, unshielded (to extend flow switch cables) $0.66/ft Cable, 3 twisted pair, 2 shields, 22 AWG (to extend electrodeless conductivity sensor cables) $1.40/ft B15 Jan 2015

27 WCT400 Series Bleed & Feed Cooling Tower Controllers W400 WCT400 - U VOLTAGE OUTPUT OPTION USB PART # / CODE DESCRIPTION PRICE (adder) WCT400 Cooling Tower Controller Bleed & Feed $ VOLTAGE VAC, prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Isolated 4-20 ma output OPTIONS N No electrode Graphite electrode & tee, 20 ft. cable (for in-line or submersion mounting) n/c 2 Graphite electrode & flow switch manifold mounted on PP panel, 5 ft. cable High pressure electrode (up to 300 psi) High pressure electrode & flow switch manifold on PP panel, 5 ft. cable 1, SS electrode & tee, 20 ft. cable SS electrode & flow switch manifold on PP panel, 5 ft. cable USB U Integrated datalogging and config file import/export via USB flash stick n/c WCT410 Series Bleed & Feed Cooling Tower Controller with Biocide Timers WCT410 - U VOLTAGE OUTPUT OPTION USB PART # / CODE DESCRIPTION PRICE WCT410 Cooling Tower Controller -Bleed & Feed w/ 2 Biocides and Alarm $1, VOLTAGE VAC, prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Isolated 4-20 ma output OPTIONS N No electrode Graphite electrode & tee, 20 ft. cable (for in-line or submersion mounting) n/c 2 Graphite electrode & flow switch manifold mounted on PP panel, 5 ft. cable L Graphite electrode & flow switch manifold (loose, no panel), 20 ft. cable High pressure electrode (up to 300 psi) High pressure electrode & flow switch manifold on PP panel, 5 ft. cable 1, SS electrode & tee, 20 ft. cable (for in-line or submersion mounting) SS electrode & flow switch manifold on PP panel, 5 ft. cable USB U Integrated datalogging and config file import/export via USB flash stick n/c B15 Jan 2015

28 Spare Parts PART # / CODE DESCRIPTION PRICE Electrodes Electrode, conductivity, cooling tower, graphite, passive, 20 ft cable Electrode assembly, contacting conductivity, graphite, passive,,5 ft cable Electrode, conductivity, cooling tower, SS, passive, 20 ft cable Electrode, conductivity, cooling tower, SS, passive, 5 ft cable Electrode, conductivity, cooling tower, high pressure, 300 psi Electrode Mounting Parts Tee, 3/4 threaded, for electrode Elbow, 3/4 threaded, for electrode Nut, for or WEL electrode mounting O-Ring, FKM, for low pressure sensor mounting 8.00 Flow Switch Manifold & Parts Flow switch manifold, low pressure contacting conductivity, 20 ft cable High pressure manifold, contacting conductivity, 4 ft cable Switch, Flow switch manifold, high pressure Switch & Float assembly, 20 ft cable Switch Housing/Float Assembly 4 ft cable Float, for nut mount manifold Reed switch, for nut mount manifold, 20 ft cable Switch Housing Assembly, 4 ft cable O-ring, float retaining, for nut mount manifold Sample valve, low pressure Flow switch, 150 psi Flow switch assembly, 20 ft. cable Manifold assembly, retrofit kit Flow Switch Body (Tee) Screw, 8-32 x 3/4 FH SS Nut, 8-32 Keps, SS Hanger, Pipe, 36-39mm, Clic Hanger, Pipe, mm, Clic Nipple, 3/4" Close CPVC Schedule Tee, 3/4" PVC, T x T x T, Schedule Panel, Mounting, 17 x Adapter, 3/4" MNPT x 1/4" FNPT, PVC Screw, 8-32 x 1-1/8, SS 0.60 Fuses Fuse, 1 Amp, F1 for all W400 Series Fuse, 6 Amp, F2 for all W400 Series Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 5 Amp, F2 for 240V W300 Series Fuse, 10 Amp, F2 for 120V W300 Series Fuse, 1/16Amp, F1 for 240V W300 Series B15 Jan 2015

29 Cable Extension Parts PRICE Cable for flow switch extension 0.66/ft Cable, 1 Pair, Shielded, 22 AWG (watermeter) 1.00/ft Cable, 4 conductor with shield (to extend to contacting conductivity sensor cable) 0.78/ft Cable, 10 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 25 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 50 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 100 ft., to extend W300/400 contacting conductivity sensor, used with junction box Junction box W400 Circuit Boards mA Option Board, W400 series Power/Relay Board, WCT Power/Relay Board, WCT Label/Panel Assembly, WCT400-U Label/Panel Assembly, WCT410-U W300 Circuit Boards Label/Panel Assembly, WCT Label/Panel Assembly, WCT Power Supply Board w/fuse, WCT300, 120V Power Supply Board w/fuse, WCT300, 240V Power Supply Board w/fuse, WCT310, 120V Power Supply Board w/fuse, WCT310, 240V ma Option Board, W300 series Other Power Cord, 115V, Male Power Cord, 115V, Female Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert,4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Housing, Switch Cable W400 Ribbon Cable Assembly, Power, W300 Series B15 Jan 2015

30 WDT400 Series Dual Tower Bleed & Feed Controllers WDT400 - U W400 VOLTAGE OUTPUT SENSOR USB PART # / CODE DESCRIPTION PRICE (adder) WDT400 Dual Cooling Tower Controller $1, VOLTAGE VAC, prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma outputs n/c 4 Single 4-20 ma output Dual 4-20 ma outputs SENSOR N No electrodes USB 1 Two graphite electrodes with tees (for in-line or submersion), 20 ft. cables n/c 2 Two graphite electrodes & loose flow switches, 20 ft. cables Two high pressure electrodes & glands (up to 300 psi) Two high pressure electrodes & loose flow switch manifolds, 20 ft. cables 2, Two SS electrodes & tees, 20 ft. cables Two SS electrodes & loose flow switch manifolds, 20 ft. cables U Integrated datalogging and config file import/export via USB flash stick n/c B15 Jan 2015

31 WDT410 Bleed & Feed Cooling Tower Controller with Biocides, ph or ORP WDT410 - U W400 VOLTAGE OUTPUT SENSOR USB PART # / CODE DESCRIPTION PRICE (adder) WDT410 Cooling Tower Controller -Bleed & Feed w/2 Biocides $1, VOLTAGE VAC, prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Single 4-20 ma output Dual 4-20 ma outputs SENSORS USB N No electrodes n/c 1 SS electrode, ph electrode & tees (in-line or submersion), 20 ft. cables SS electrode, ORP electrode & tees (in-line or submersion), 20 ft. cables SS electrode, ph electrode & flow switch manifold on PP panel, 5 ft. cables 1, SS electrode, ORP electrode & flow switch manifold on PP panel, 5 ft. cables 1, Graphite electrode, ph electrode & tees (in-line or submersion), 20 ft. cables Graphite electrode, ORP electrode & tees (in-line or submersion), 20 ft. cables R Graphite electrode, ORP rod style electrode & tees, (in-line or submersion) 20 ft. cables Graphite electrode, ph electrode & flow switch manifold on PP panel, 5 ft. cable 1, Graphite electrode, ORP electrode & flow switch manifold on PP panel, 5 ft. cables 1, R Graphite electrode, ORP rod style electrode & flow switch manifold on PP panel, 5 ft. cables 1, A High pressure electrodes (Cond + ph) w/flow switch on PP panel, 5-10 ft. cables 2, B High pressure electrodes (Cond + ORP) w/flow switch on PP panel, 5-10 ft. cables 2, U Integrated datalogging and config file import/export via USB flash stick n/c B15 Jan 2015

32 WDT Series Cooling Tower Controllers continued Spare Parts PART # / CODE DESCRIPTION PRICE Electrodes & Preamplifier Electrode, conductivity, cooling tower, graphite, 20 ft cable Electrode assembly, contacting conductivity, passive, graphite, 5 ft cable Electrode, conductivity, cooling tower, passive, SS, 20 ft cable Electrode, conductivity, cooling tower, passive, SS, 5 ft cable Electrode, conductivity, cooling tower, high pressure, 300 psi WEL-PHF-NN Electrode, ph, cartridge only WEL-MVF-NN Electrode, ORP, cartridge only WEL-MVR-NN Electrode, ORP, rod style only Housing w/preamplifier, no ATC, WEL electrodes, 5 ft. cable Preamplifier, ph/orp Electrode, high pressure, ph Electrode, high pressure, ORP, 10 ft cable Electrode Mounting Parts Tee, 3/4 threaded, for electrode Elbow, 3/4 threaded, for electrode Nut, for or WEL electrode mounting O-Ring, FKM, for low pressure sensor mounting Gland, SS, High Temp/In-line (ph/orp) Flow Switch Manifolds & Parts Flow switch manifold, low pressure contacting conductivity, 20 ft cable Flow switch manifold, low pressure contacting conductivity. +ph/orp, 20 ft cable High pressure manifold, ph/ contacting conductivity, 4 ft cable Switch & Float assembly, 20 ft cable Switch Housing/Float Assembly 4 ft cable Switch, Flow switch manifold, high pressure Flow switch, 150psi Flow switch assembly, 20 ft. cable Float, for nut mount manifold Switch Housing Assembly, 20 ft cable Switch Housing Assembly, 4 ft cable O-ring, float retaining, for nut mount manifold Sample valve, low pressure Flow Switch Body (Tee) Screw, 8-32 x 3/4 FH SS Nut, 8-32 Keps SS Panel, Mounting, 24 x Hanger, Pipe, 36-39mm, Clic Hanger, Pipe, mm, Clic Nipple, 3/4" Close CPVC Schedule B15 Jan 2015

33 WDT Series Cooling Tower Controllers continued PART # / CODE DESCRIPTION PRICE Screw, 8-32 x 1-1/8, SS 0.60 Fuses Fuse, 1 Amp, F1 for all W400 series Fuse, 6 Amp, F2 for all W400 Series Fuse, 5 Amp, F2 for 240V W300 Series Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 10 Amp, F2 for 120V W300 Series Fuse, 1/16 Amp, F1 for 240V W300 Series 3.70 Cable extension parts Cable for flow switch extension 0.66/ft Cable, 1 Pair, Shielded, 22 AWG (watermeter) 1.00/ft Cable, 4 conductor with shield (to extend to contacting conductivity sensor cable) 0.78/ft Cable, 10 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 25 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 50 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 100 ft., to extend W300/400 contacting conductivity sensor, used with junction box Junction box W400 Circuit Boards ma Option Board, W400 series Conductivity sensor input board, WDT400 series Option Board, ph/orp, W400 Series Power/Relay Board, WDT Power/Relay Board, WDT Label/Panel Assembly, WDT410-U Label/Panel Assembly, WDT400-U W300 Circuit Boards Label/Panel Assembly, WDT ma Option Board, W300 series Label/Panel Assembly, WDT Power Supply Board w/fuse, WDT300, 120V Power Supply Board w/fuse, WDT300, 240V Power Supply Board w/fuse, WDT310, 120V Power Supply Board w/fuse, WDT310, 240V Dual input option board, W300 Series Other Power Cord, 115V, Male Power Cord, 115V, Female Locknut, 3/4 Electrical, Plated Plug, 1" Hole B15 Jan 2015

34 WDT Series Cooling Tower Controllers continued PART # / CODE DESCRIPTION PRICE Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Housing, Switch Cable W400 Ribbon Cable Assembly, Power, W300 Series B15 Jan 2015

35 W400 WECT400 Bleed & Feed Cooling Tower Controllers w/econd Sensor WECT400 - U WIRING OPTIONS ANALOG OUTPUT SENSOR USB PART # / CODE DESCRIPTION PRICE (adder) WECT400 Cooling Tower Controller Bleed & Feed $ WIRING VAC, prewired Hardwired, cable glands n/c ANALOG OUTPUT N No Analog (4-20 ma) output n/c 4 Single Isolated (4-20 ma) output SENSORS N No electrodes n/c 1 Electrodeless conductivity sensor and tee, 20 ft. cable (for inline mounting) Electrodeless conductivity sensor & flow switch manifold on PP panel, 5 ft. cable L Electrodeless conductivity sensor & flow switch manifold (loose, no panel), 20 ft. cable Submersion conductivity sensor (no tee or adaptor), 20 ft. cable USB DATA LOG & CONFIGURATION FILE U Data logging and configuration file capability n/c WECT410 Bleed & Feed Cooling Tower Controller w/biocides, Econd Sensor WECT410 - U WIRING OPTIONS ANALOG OUTPUT SENSOR USB PART # / CODE DESCRIPTION PRICE (adder) WECT410 Cooling Tower Controller -Bleed & Feed w/ 2 Biocides and Alarm $ WIRING VAC, prewired Hardwired, cable glands n/c ANALOG OUTPUT N No Analog (4-20 ma) output n/c 4 Single Isolated (4-20 ma) output SENSORS N No electrodes n/c 1 Electrodeless conductivity sensor and tee, 20 ft. cable (for inline mounting) Electrodeless conductivity sensor & flow switch manifold on PP panel, 5 ft. cable L Electrodeless conductivity sensor & flow switch manifold (loose, no panel), 20 ft. cable Submersion conductivity sensor (no tee or adaptor), 20 ft. cable USB DATA LOG & CONFIGURATION FILE U Data logging and configuration file capability n/c B15 Jan 2015

36 WEDT410 Bleed & Feed Cooling Tower Controller, Biocides, Econd, ph/orp W400 WEDT410 - U WIRING ANALOG OPTIONS OUTPUT SENSOR USB PART # / CODE DESCRIPTION PRICE (adder) WEDT410 Cooling Tower Controller -Bleed & Feed w/2 Biocides $1, WIRING VAC, prewired Hardwired, cable glands n/c ANALOG OUTPUT N No Analog (4-20 ma) output n/c 4 Single Isolated (4-20 ma) output Two Isolated (4-20 ma) outputs SENSORS N No electrodes n/c 1 Electrodeless conductivity & ph sensors and tees,20 ft. cable (for inline mounting) R Electrodeless conductivity & rod style ORP sensors & tees, 20 ft. cable (for inline mounting) 1, Electrodeless conductivity & ph sensors & flow switch manifold on PP panel 1, R Electrodeless conductivity & rod style ORP sensors & flow switch manifold on PP panel 1, USB DATA LOG & CONFIGURATION FILE U Data logging and configuration file capability n/c Spare Parts PART # / CODE DESCRIPTION PRICE Circuit Boards Label/Panel Assembly, WECT400-U Label/Panel Assembly, WECT410-U Label/Panel Assembly, WEDT410-U Power/Relay Board, WECT Power/Relay Board, WECT Power/Relay Board, WEDT mA Option Board, W400 Series Option Board, ph/orp, W400 Series B15 Jan 2015

37 Sensors PRICE Sensor, Econd, Active, CPVC, 0-10,000 us/cm, 20 ft. cable, for WECT/WEDT Sensor, Econd, Active, CPVC, 0-10,000 us/cm, 5 ft. cable for WECT/WEDT WEL-PHF-NN Electrode, ph, cartridge only WEL-MVR-NN Electrode, ORP, rod style only Housing w/preamplifier, no ATC, WEL electrodes, 5 ft. cable Sensor Mounting Parts Electrodeless conductivity tee/adapter with ¾ reducers Nut, for sensor mounting O-Ring, FKM, for low pressure sensor mounting Electrodeless conductivity, Tee, Nut, O-Ring Flow Switch Manifolds & Parts Switch & Float assembly, 20 ft cable Switch Housing/Float Assembly, 4 ft cable Flow switch, 150 psi Flow switch assembly, 20 ft. cable Float, for nut mount manifold Reed switch, for nut mount manifold, 20 ft cable Switch Housing Assembly, 4' cable O-ring, float retaining, for nut mount manifold Sample valve, low pressure Flow Switch Body (Tee) Screw, 8-32 x 3/4 FH SS Nut, 8-32 Keps SS Hanger, Pipe,3 6-39mm, Clic Hanger, Pipe, mm, Clic Nipple, 3/4" Close CPVC Schedule Adapter, 3/4" MNPT x 1/4" FNPT, PVC Tee, 3/4" PVC,T x T x T, Schedule Fuses Fuse, 1 Amp, F1 for all W400 Series Fuse, 6 Amp, F2 for all W400 Series 3.70 Cable Extension Parts Cable for flow switch extension 0.66/ft Cable, 1 Pair, Shielded, 22 AWG (watermeter) 1.00/ft Junction box Cable, 3 Twisted Pair, Shielded, 24 AWG (to extend conductivity sensor) 2.10/ft Other Power Cord, 115V, Male Power Cord, 115V, Female Locknut, 3/4 Electrical, Plated Plug, 1" Hole B15 Jan 2015

38 PART # / CODE DESCRIPTION PRICE Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Housing, Switch Cable W400 Ribbon Cable Assembly, Power, W300 Series B15 Jan 2015

39 W400 WBL400 Series Bleed & Feed Boiler Controller WBL400 - U VOLTAGE OPTION USB OUTPUT PART # / CODE DESCRIPTION PRICE (adder) WBL400 Boiler Controller - Bleed & Feed $1, VOLTAGE VAC, prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Isolated 4-20 ma output OPTION USB 5 Standard electrode (up to 250 psi) n/c N No electrode U Integrated datalogging and config file import/export via USB flash stick n/c WBL410 Series Bleed & Four Feed Boiler Controller WBL410 U PART # / CODE DESCRIPTION PRICE (adder) WBL410 Boiler Controller - Bleed & Four Feeds plus Alarm $1, VOLTAGE VAC, prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Isolated 4-20 ma output OPTION USB VOLTAGE OUTPUT OPTION USB - 5 Standard electrode (up to 250 psi) n/c N No electrode U Integrated datalogging and config file import/export via USB flash stick n/c B15 Jan 2015

40 WCM400 Series Condensate Monitor W400 WCM400 - U VOLTAGE OUTPUT SENSOR USB PART # / CODE DESCRIPTION PRICE (adder) WCM400 Dual Relay Condensate Monitor $1, VOLTAGE VAC, prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Isolated 4-20 ma output SENSOR 5 Standard electrode (up to 250 psi) n/c USB N No electrode U Integrated datalogging and config file import/export via USB flash stick n/c Spare Parts PART # / CODE DESCRIPTION PRICE Electrodes Electrode, Boiler/Condensate, w/junction Box NT Electrode, Boiler Condensate, No temp, w/junction Box Electrode, Boiler/Condensate, no Junction Box Electrode, Boiler/Condensate, no ATC, no Junction Box Electrode Mounting Parts Cross, ¾ Black iron, boiler Fuses Fuse, 1 Amp, F1 for all W400 series Fuse, 6 Amp, F2 for all W400 Series Fuse, 5 Amp, F2 for 240V W300 Series Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 10 Amp, F2 for 120V W300 Series Fuse, 1/16 Amp, F1 for 240V W300 Series 3.70 W400 Circuit Boards ma Option Board, W400 series Power/Relay Board, WBL Power/Relay Board, WBL Power/Relay Board, WCM Label/Panel Assembly, WBL400-U Label/Panel Assembly, WBL410-U Label/Panel Assembly, WCM400-U W300 Circuit Boards Label/Panel Assembly, WCM Label/Panel Assembly, WBL Label/Panel Assembly, WBL Power Supply Board, WBL300, 120V B15 Jan 2015

41 Circuit Boards (continued) PRICE Power Supply Board, WBL300, 240V Power Supply Board, WCM V Power Supply Board, WCM300, 240V Power Supply Board, WBL310, 120V Power Supply Board, WBL310, 240V ma Option Board, W300 series Cables Cable, 4 conductor with shield (to extend contacting conductivity sensor cable) 0.78/ft Cable, 10 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 25 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 50 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 100 ft., to extend W300/400 contacting conductivity sensor, used with junction box Junction box Other Power Cord, 115V, Male Power Cord, 115V, Female Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Housing, Switch Cable W400 Ribbon Cable Assembly,Power,W300 Series B15 Jan 2015

42 WDB400 Series Bleed & Feed Dual Boiler Controller W400 WDB400 - U PART # / CODE DESCRIPTION PRICE (adder) WDB400 Dual Boiler Controller $1, VOLTAGE VAC, prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Single isolated 4-20 ma output Two isolated 4-20 ma outputs ELECTRODE 5 Two standard electrodes (up to 250 psi) n/c USB VOLTAGE OUTPUT ELECTRODE OUTPUT USB N No electrodes U Integrated datalogging and config file import/export via USB flash stick n/c WDC400 Series Dual Input Condensate Monitor WDC400 - U PART # / CODE DESCRIPTION PRICE (adder) WDC400 Dual Condensate Monitor $1, VOLTAGE VAC, prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Single isolated 4-20 ma output Two isolated 4-20 ma outputs ELECTRODE 5 Two standard electrodes (up to 250 psi) n/c USB VOLTAGE OUTPUT ELECTRODE USB N No electrodes U Integrated datalogging and config file import/export via USB flash stick n/c B15 Jan 2015

43 Spare Parts PART # / CODE DESCRIPTION PRICE Electrodes Electrode, Boiler/Condensate, w/junction Box NT Electrode, Boiler Condensate, No temp, w/junction Box Electrode, Boiler/Condensate, no Junction Box Electrode, Boiler/Condensate, no ATC, no Junction Box Electrode Mounting Parts Cross, ¾, Black iron, boiler Fuses Fuse, 1 Amp, F1 for all W400 series Fuse, 6 Amp, F2 for all W400 Series Fuse, 5 Amp, F2 for 240V W300 Series Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 10 Amp, F2 for 120V W300 Series Fuse, 1/16 Amp, F1 for 240V W300 Series 3.70 W400 Circuit Boards ma Option Board, W400 series Conductivity sensor input board, WDB/WDC400 series Power/Relay Board, WDB Power/Relay Board, WDC Label/Panel Assembly, WDB400-U Label/Panel Assembly, WDC400-U W300 Circuit Boards Dual Input Option Board, W Label/Panel Assembly, WDC Label/Panel Assembly, WDB Power Supply Board, WDB300, 120V Power Supply Board, WDB300, 240V Power Supply Board, WDC300, 120V Power Supply Board, WDC300, 240V ma Option Board, W300 series Cables Cable, 4 conductor with shield (to extend contacting conductivity sensor cable) 0.78/ft Cable, 10 ft., to extend W300/400 CCond sensor, used with junction box Cable, 25 ft., to extend W300/400 CCond sensor, used with junction box Cable, 50 ft., to extend W300/400 CCond sensor, used with junction box Cable, 100 ft., to extend W300/400 CCond sensor, used with junction box Other Power Cord, 115V, Male Power Cord, 115V, Female Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Cable Assembly,Power,W300 Series Nut, 6-32 Keps Housing, Switch Cable W400 Ribbon B15 Jan 2015

44 SECTION II Process Monitors GENERAL INDUSTRIAL WebAlert WebAlert Series Process Monitor WA500 - WIRING COMMS COMMS HARDWARE SOFTWARE PART # / CODE DESCRIPTION PRICE (adder) WA500 Process Monitor $1, WIRING OPTIONS H Hardwire, cable glands n/c P 120VAC USA power cord w/cable glands DIGITAL COMMUNICATIONS HARDWARE (USB AND ETHERNET ARE STANDARD) N No additional hardware n/c M Modem card G Cellular 3G modem card (requires VTouch activation) DIGITAL COMMUNICATIONS SOFTWARE N No additional capability n/c 1 Ethernet Networking (Master capability) Accessories PRICE Filter, Mains Power, 20 Amp Level Switches Level switch, 3 ft. Maximum depth Level switch, 5 ft. Maximum depth Spare Parts PART # / CODE DESCRIPTION PRICE Process Monitor Board, WA Power Supply - I/O Board, WA Core Board, WA M Core Board with Master Capability, WA Ribbon Cable Cover, WA500 Power Supply Networking Master Capability upgrade code, WebAlert Modem + instructions (landline) Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Nut, 6-32 Keps Strain Relief, 1/2" NPT Gland, Cable Insert, 6 Hole x 4mm CD, Software Support Truss, For GPRS Modem SMA Jack 10"Angled Plug SMA To FME Adapter Float Assembly, Point Level Sensor Add-on Kits Kit, GPRS 2G Modem w/antenna, Cables, Hardware B15 Jan 2015

45 ph/orp/conductivity/disinfection WIND Industrial Water Controller WIND8 - WebMaster WIND SENSOR INPUTS VOLTAGE CODE ANALOG OUTPUTS INPUT OPTIONS DIGITAL COMMS HARDWARE DIGITAL COMMS SOFTWARE PART # / CODE DESCRIPTION PRICE (adder) WIND Multi I/O Industrial Water Controller $3, SENSOR INPUTS REQUIRED 1 one sensor input n/c 2 Two sensor inputs Three sensor inputs Four sensor inputs Note: All sensors and flow switch manifolds must be purchased separately. See Sensor/Flow Switch Options. VOLTAGE CODE 0 Prewired w/ USA power cord, 0 powered relays, 8 dry contact relays Prewired w/ USA cords, 7 powered relays, 1 dry contact relay Prewired w/ USA cords, 8 powered relays Prewired w/ USA cords, 4 powered relays, 4 dry contact relays Hardwired, 0 powered relays, 8 dry contact relays n/c 5 Hardwired, 8 powered relays n/c 6 Hardwired, 7 powered relays, 1 dry contact relay n/c 7 Hardwired, 4 powered relays, 4 dry contact relays n/c E Prewired w/ USA power cord, 4 powered relays, 4 opto-isolated (pulse) relays F Prewired w/ USA cords, 4 dry contact relays, 4 opto-isolated (pulse) relays G Hardwired, 4 powered relays, 4 opto-isolated (pulse) relays n/c H Hardwired, 4 dry contact relays, 4 opto-isolated (pulse) relays n/c ANALOG OUTPUTS N None n/c 1 One 4-20 ma output board Two 4-20 ma output boards Three 4-20 ma output boards Four 4-20 ma output boards INPUT OPTIONS N None n/c A Analog Input board (8 Inputs) D Digital Input board (6 Inputs) B Both Analog and Digital Input boards DIGITAL COMMS HARDWARE (USB AND ETHERNET ARE STANDARD) N No additional communications capability n/c M Modem card G 3G Cellular modem card (requires VTouch activation) DIGITAL COMMS SOFTWARE (USB AND ETHERNET ARE STANDARD) N No additional capability n/c 1 Ethernet Networking (Master Capability) Modbus TCP Ethernet Networking (Master Capability) + Modbus TCP 1, B15 Jan 2015

46 Sensor and Flow Switch Manifold Options for WIND The first step is to select your sensors. If the sensor will be installed in a flow switch manifold on a panel, select from the list of sensors under Panel Mounted Flow Switch Manifold Sensor Options, as these sensors do not include the in-line mounting hardware. If the sensor will be mounted in-line, select from the sensors under In-Line Mounted Sensor Options. If the sensor will be mounted in a submersion application or in a loose manifold, select from the sensors under Submersion Mounted or Loose Flow Switch Manifold Sensor Options. The next step is to select the flow switch manifold (if required) to use with your sensors. Loose Flow Switch Manifold Options are intended for use with Submersion Mounted Sensor Options with 20 ft. cables. Panel Mounted Manifold Options are intended for use with Panel Mounted Flow Manifold Sensor Options with 5 ft. cables. Please note that for each controller, only one manifold may be mounted on a panel next to the controller. Cables are available in 5 ft. (1.6m) or 20 ft. (6.1m) lengths. Order extension cable and junction box for longer runs. High-pressure conductivity sensor assemblies include a preamp and junction box. Cable must be ordered separately (p/n ). Maximum Cable Lengths ph, ORP and Disinfection: 1000 ft. (305m) Conductivity: 250 ft. (76m) Sensor Options for Panel Mounted Flow Switch Manifolds (no in-line mounting hardware) ph ph, flat, 5 ft. cable, no tee, w/temp comp ph, flat, 5 ft. cable, no tee, w/o temp comp ph, bulb, 5 ft. cable, no tee, w/temp comp ph, bulb, 5 ft. cable, no tee, w/o temp comp ph, flat, HF resistant, 5 ft. cable, w/temp comp ph, flat, HF resistant, 5 ft. cable, w/o temp comp ph, bulb, HF resistant, 5 ft. cable, w/temp comp ph, bulb, HF resistant, 5 ft. cable, w/o temp comp ph, low ionic strength, 5 ft. cable ph, low ionic strength, 5 ft. cable, w/o temp comp ph, high pressure, 10 ft. cable, in-line, with preamp ORP ORP, rod style, 5 ft. cable, no tee, w/o temp comp ORP, flat style, 5 ft. cable, no tee, w/o temp comp ORP, high pressure, 10 ft. cable, in-line, with preamp Contacting Conductivity Contacting, PP/Graphite, 5 ft. cable, no tee Contacting, PP/stainless, 5 ft. cable, no tee Contacting, 300 psi, no cable, with preamp and j-box Electrodeless Conductivity Electrodeless, ms/cm, 5 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, 1-10 ms/cm, 5 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 5 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 5 ft. cable, no tee, no mtg adapter, CPVC Price B15 Jan 2015

47 In-Line Mounted Sensor Options (includes in-line mounting hardware) PRICE ph WEL-PHF-12 ph, flat, 20 ft. cable, in-line, w/tee, w/ temp comp WEL-PHF-22 ph, flat, 20 ft. cable, in-line, w/tee, w/o temp comp WEL-PHB-12 ph, bulb, 20 ft. cable, in-line, w/tee, w/ temp comp WEL-PHB-22 ph, bulb, 20 ft. cable, in-line, w/tee, w/o temp comp WEL-PHH-12 ph, flat, HF resistant, 20 ft. cable, in-line, w/tee, w/ temp comp WEL-PHH-22 ph, flat, HF resistant, 20 ft. cable, in-line, w/tee, w/o temp comp WEL-PHLI-12 ph, low ionic strength (under 100µS/cm), 20 ft. cable, in-line, w/tee, w/temp comp WEL-PHLI-22 ph, low ionic strength (under 100µS/cm), 20 ft. cable, in-line, w/tee, w/o temp comp ORP WEL-MVR-22 ORP, rod style, 20 ft. cable, in-line Contacting Conductivity (0-10,000µS/cm) Contacting, PP/graphite, 20 ft. cable, in-line or submersion Contacting, PP/stainless, 20 ft. cable, in-line or submersion Contacting, 300 psi, no cable, with preamp and j-box Electrodeless Conductivity Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, CPVC Electrodeless, 1-10 ms/cm, 20 ft. cable, in-line w/mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Electrodeless, 1-10 ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Disinfection WFCB-20 Free Chlorine/Bromine Sensor, 20 ppm, Flow Cell, 20 ft. cable 1, WFCBL-20 Free Chlorine/Bromine Sensor, 2 ppm, Flow Cell, 20 ft. cable 1, WFCBH-20 Free Chlorine/Bromine Sensor, 200 ppm, Flow Cell, 20 ft. cable 1, WFCXB-20 Free Chlorine/Bromine Sensor, ext. ph range, 20 ppm, Flow Cell, 20 ft. cable 1, WTCB-20 Total Chlorine Sensor, 20 ppm, Flow cell, 20 ft. cable 2, WCDB-20 Chlorine Dioxide Sensor, 20 ppm, Flow Cell, 20 ft. cable 1, WCDBL-20 Chlorine Dioxide Sensor, 2 ppm, Flow Cell, 20 ft. cable 1, WCDBH-20 Chlorine Dioxide Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, WOZB-20 Ozone Sensor, 20 ppm, Flow Cell, 20 ft. cable 2, WPAB-20 Peracetic Acid Sensor, 2000 ppm, Flow Cell, 20 ft. cable 2, WPABL-20 Peracetic Acid Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, WPABH-20 Peracetic Acid Sensor, 20,000 ppm, Flow Cell, 20 ft. cable 2, WPAPK-20 Peracetic Acid Sensor, PEEK, 20,000 ppm, Acrylic Flow Cell, 20 ft. cable 5, WPAPKL-20 Peracetic Acid Sensor, PEEK, 2000 ppm, Acrylic Flow Cell, 20 ft. cable 6, WHPB-20 Hydrogen Peroxide Sensor, 2000 ppm, Flow Cell, 20 ft. cable 2, WHPBL-20 Hydrogen Peroxide Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, WHPBH-20 Hydrogen Peroxide Sensor, 20,000 ppm, Flow Cell, 20 ft. cable 2, B15 Jan 2015

48 Submersion Mounted or Loose Flow Switch Manifold Sensor Options ph PRICE WEL-PHF-11 ph, flat, 20 ft. cable, submersion, w/temp comp WEL-PHF-21 ph, flat, 20 ft. cable, submersion, w/o temp comp WEL-PHB-11 ph, bulb, 20 ft. cable, submersion, w/temp comp WEl-PHB-21 ph, bulb, 20 ft. cable, submersion, w/o temp comp WEL-PHH-11 ph, flat, HF resistant, 20 ft. cable, submersion, w/temp comp WEl-PHH-21 ph, flat, HF resistant 20 ft. cable, submersion, w/o temp comp WEL-PHLI-11 ph, low ionic strength (under 100 µs/cm), 20 ft. cable, submersion, w/temp comp WEl-PHLI-21 ph, Low ionic strength (under 100 µs/cm), 20 ft. cable, submersion, w/o temp comp ORP WEL-MVR-21 ORP, rod style, 20 ft. cable, submersion WEL-MVF-21 ORP, flat style, 20 ft. cable, submersion Contacting Conductivity (0-10,000µS/cm) Contacting, PP/graphite, 20 ft. cable, in-line or submersion Contacting, PP/stainless, 20 ft. cable, in-line or submersion Electrodeless Conductivity Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, 1-10 ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, 1-10 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Disinfection (in-line only) Free Chlorine/Bromine, 20 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, 2 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, 200 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, ext. ph range, 20 ppm, 20 ft. cable, no mounting hardware 1, Total Chlorine, 20 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide, 20 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide, 2 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide, 200 ppm, 20 ft. cable, no mounting hardware 1, Ozone, 20 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, 2000 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, 200 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, PVC, 20,000 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 2000 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 200 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 20,000 ppm, 20 ft. cable, no mounting hardware 2, Loose Flow Switch Manifold Options For one sensor per manifold: Low pressure ph or ORP High pressure ph or ORP, 4 ft cable Low pressure contacting conductivity High pressure contacting conductivity, 4 ft cable Low pressure electrodeless conductivity Disinfection B15 Jan 2015

49 For two sensors per manifold: Two low pressure ph or ORP Manifold, Two high pressure ph or ORP, 4 ft cable 1, Low pressure contacting conductivity + ph/orp High pressure contacting conductivity + high pressure ph/orp, 4 ft cable Low pressure electrodeless conductivity + ph/orp For three sensors per manifold: Low pressure conductivity + two ph/orp High pressure conductivity + two ph/orp, 4 ft cable 1, Electrodeless conductivity + two ph/orp Panel Mounted Manifold Options: For one sensor per manifold: Low pressure ph or ORP on Polypro panel Manifold, High pressure ph or ORP on Polypro panel, 4 ft cable Low pressure contacting conductivity on Polypro panel High pressure contacting conductivity on Polypro panel Low pressure electrodeless conductivity on Polypro panel Disinfection (note: WIND controller does not mount on panel with this manifold) For two sensors per manifold: Manifold, Two low pressure ph or ORP on Polypro panel, 4 ft cable Manifold, Two high pressure ph or ORP on Polypro panel, 4 ft cable 1, Low pressure contacting conductivity + ph/orp on Polypro panel High pressure contacting conductivity + high pressure ph/orp on Polypro panel 1, Low pressure electrodeless conductivity + ph/orp on Polypro panel For three sensors per manifold: Low pressure contacting conductivity + two ph/orp on Polypro panel High pressure contacting conductivity + two high pressure ph/orp on Polypro panel 1, Low pressure electrodeless conductivity + two ph/orp on Polypro panel Extension Cable Cable, 3 twisted pair, shielded (ph, ORP, Conductivity) 2.10/ft Cable, 4 conductor (Disinfection) 0.78/ft. Junction Box Junction Box B15 Jan 2015

50 Spare Parts for WIND PART # / CODE DESCRIPTION PRICE Circuit Boards ma Output Card, WebMaster Digital Input Card Analog Input Card Modem Card (landline) Sensor Input Card Power Supply, W Display, WebMaster Relay Card, 7 Powered, 1 dry Relay Card, 8 Powered Relay Card, 4 powered, 4 dry Relay Card, 6 powered, 2 dry Relay Card, 8 dry contact Relay Card, 4 Powered, 4 Opto-Isolated Relay Card, 4 dry contact, 4 opto-isolated Core Interface Board, WIND Core, WIND Spare Part, GPRS 3G Modem (Quad Band) USB Device Assembly Port w/ Cap Power Switch Switch Boot, WIND USB Device Exterior Port Fuses Fuse, F1, WebMaster, 1.6 amp Fuse, F2 and F3, WebMaster, 6.3 amp 3.70 ph/orp/cond sensors & preamplifiers WEL-PHF-NN Electrode, ph, Flat WEL-MVR-NN Electrode, ORP, Rod Electrode, ph, high pressure Electrode, ORP, high pressure, 10 ft cable Preamplifier Housing, ph/orp, No ATC, 20 ft. cable, for WEL Preamplifier Housing, ph/orp, No ATC, 5 ft. cable, for WEL Preamplifier Housing, ph/orp, ATC, 20 ft. cable, for WEL Preamp Housing, ph/orp, 5 Ft Cable, ATC Preamplifier, ph/orp, for high pressure electrodes Preamp, for high pressure contacting conductivity electrode (190768) Electrode, Contacting Conductivity, Active, PP/Graphite Sensor, Contacting Conductivity, Boiler Sensor, Contacting Conductivity, high pressure tower, 300 psi Electrode, Contacting Conductivity, Active, PP/Stainless Steel, 20 ft. cable Electrode, Contacting Conductivity, Active, PP/Stainless Steel, 5 ft. cable Electrodeless, 1 ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, 10 ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, 100 ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, 1000 ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, 1 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, 10 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, 100 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, B15 Jan 2015

51 PART # / CODE DESCRIPTION PRICE Electrodeless, 1000 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless sensor without mounting adapter, PEEK, donut shape 1, ph/orp/cond electrode mounting parts O-Ring, FKM, for low pressure sensor mounting Nut, for low pressure sensor mounting Tee, for low pressure sensor mounting Elbow, for low pressure contacting conductivity sensors Gland, SS, High Temp/In-line (ph/orp) Adapter, in line, for electrodeless conductivity sensor Cross, ¾, Black iron, high pressure Tee, ¾" Black iron, high pressure Disinfection sensor and cable assemblies (purchased in conjunction with flow switch manifolds) Free Chlorine/Bromine, 20 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, 2 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, 200 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, ext. ph range, 20 ppm, 20 ft. cable, no mounting hardware 1, Total Chlorine, 20 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide, 20 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide, 2 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide, 200 ppm, 20 ft. cable, no mounting hardware 1, Ozone, 20 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, 2000 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, 200 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, PVC, 20,000 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 2000 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 200 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 20,000 ppm, 20 ft. cable, no mounting hardware 2, Flow switch manifolds Disinfection manifold, loose Disinfection manifold, on polypro panel Replacement disinfection sensors Free Chlorine/Bromine Sensor, 20 ppm, no cable 1, Free Chlorine/Bromine Sensor, 2 ppm, no cable 1, Free Chlorine/Bromine Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine Sensor, ext. ph range, 20 ppm, no cable 1, Total Chlorine Sensor, 20 ppm, no cable 1, Chlorine Dioxide Sensor, 2 ppm, no cable 1, Chlorine Dioxide Sensor, 20 ppm, no cable 1, Chlorine Dioxide Sensor, 200 ppm, no cable 1, Ozone Sensor, 2ppm, no cable 2, Ozone Sensor, 20 ppm, no cable 2, Peracetic Acid Sensor, 2000 ppm, no cable 1, Peracetic Acid Sensor, 200 ppm, no cable 2, Peracetic Acid Sensor, 20,000 ppm, no cable 2, Peracetic Acid Sensor, 2000 ppm, no cable 4, Peracetic Acid Sensor, PEEK, 20,000 ppm, no cable 4, Hydrogen Peroxide, 2000 ppm, no cable 2, Hydrogen Peroxide, 200 ppm, no cable 2, Hydrogen Peroxide, 20,000 ppm, no cable 2, B15 Jan 2015

52 PART # / CODE DESCRIPTION PRICE Membrane caps Membrane Cap 2/20 ppm, Chlorine Dioxide and 200/2,000 ppm Hydrogen Peroxide and 200/2,000 ppm Peracetic Acid (PVC body) Membrane Cap, 20,000 ppm Peracetic Acid (PVC body) and 20,000 ppm Hydrogen Peroxide Membrane Cap 2000/20,000 ppm, 200 ppm Chlorine Dioxide, Peracetic Acid (PEEK body) Membrane Cap, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Membrane Cap, 20 ppm Free Chlorine/Bromine (Ext ph range) and 20 ppm Total Chlorine Membrane Cap, 2 ppm Ozone Membrane Cap, 20 ppm Ozone Electrolyte Electrolyte, 100 ml, 2/20/200 ppm Chlorine Dioxide Electrolyte, 100 ml, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Electrolyte, 100 ml, 20 ppm Free Chlorine/Bromine (Ext. ph range) Electrolyte, 100 ml, 20 ppm Total Chlorine Electrolyte, 100 ml, 2/20 ppm Ozone Electrolyte, 100 ml, 200/2,000 Peracetic Acid (PVC body) and 2000/20,000 Peracetic Acid (PEEK body) Electrolyte, 100 ml, 20,000 ppm Peracetic Acid (PVC body) Electrolyte, 100 ml, 200/2,000/20,000 ppm Hydrogen Peroxide Isoplast flow cell parts Flow Cell Assembly, Disinfection sensors In-Line Mounting Nut O-Ring, FKM, for low pressure sensor mounting R Flow Cell Body Washer Set Clip Ring O-Ring, Washer Kit Flowcell Washer / O-Ring Acrylic flow cell Acrylic Flow Cell (used with PEEK Peracetic Acid sensors) 1, Cables Cable, Disinfection sensors, 20 ft Cable, Disinfection sensors, 5 ft Flow switch manifold parts Float, low pressure flow switch Switch, low pressure flow switch, 20 ft cable Switch Housing Assembly, 4 ft cable O-Ring, float retaining Flow switch, low pressure, complete Flow switch, high pressure Sample Valve, low pressure Sample Valve, high pressure Flow Switch Body (Tee) Rotameter B15 Jan 2015

53 PART # / CODE DESCRIPTION PRICE Screw, 8-32 x 3/4 FH SS Nut, 8-32 Keps SS Hanger, Pipe, 36-39mm, Clic Hanger, Pipe, mm, Clic Nipple, 3/4" Close CPVC Schedule Panel, Mounting, 30"x 19" Add-on Kits Kit, GPRS 3G Modem w/antenna, Cables, Hardware Other Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Gland, Cable Insert, 5 hole x 5mm Ribbon Cable, WebMaster Pigtail, 120 VAC Nut, 6-32 Keps Housing, Switch Power Cord, WebMaster, 15A Gland, Cable Insert, 6 Hole x 4mm CD, Software Support Truss, For GPRS Modem Cable WebMaster AC Input Cable WebMaster DC Output SMA Jack 10"Angled Plug SMA To FME Adapter Accessories Filter, Mains Power, 20 Amp Cable, USB, A to B, 10ft USB Flash drive Modbus Upgrade code Networking Master Upgrade code Antenna Cable Extension Assembly, 50' Antenna Cable Extension Assembly, 100' NYE Lubricant 760g, 1cc B15 Jan 2015

54 WPH600 Series ph/orp Controllers W600 WPH RELAYS/ WIRING INPUT CARDS ANALOG OUTPUTS ETHERNET SENSORS PART # / CODE DESCRIPTION PRICE (adder) WPH ph/orp Controller BASE $ RELAYS/WIRING 600H 6 powered relays, Hardwired N/C 600P 6 powered relays, Prewired with USA cords and pigtails D 6 powered relays, Prewired with DIN power cord, no pigtails H 2 powered 4 dry relays, Hardwired N/C 610P 2 powered 4 dry relays, Prewired with USA cord and 2 pigtails D 2 powered 4 dry relays, Prewired with DIN power cord, no pigtails H 2 opto 4 dry relays, Hardwired P 2 opto 4 dry relays, Prewired with USA cord and two 20 ft. pulse cables D 2 opto 4 dry relays, Prewired with DIN power cord, no pigtails H 4 opto 2 dry relays, Hardwired P 4 opto 2 dry relays, Prewired with USA cord and four 20 ft. pulse cables D 4 opto 2 dry relays, Prewired with DIN power cord, no pigtails INPUT CARDS NN No sensor input cards N/C SN One sensor input card SS Two sensor input cards AN One dual analog input card AA Two dual analog input cards SA One sensor input card and one analog input card ANALOG OUTPUTS N No analog outputs N/C A One dual isolated analog output card ETHERNET N No Ethernet N/C E Ethernet card MANIFOLD NN No sensors or flow switch manifold N/C PN Single low pressure manifold on panel** QN Single high pressure manifold on panel with * 1, PX Dual low pressure manifold on panel** QX Dual high pressure manifold on panel with two * 1, *Order ph and/or ORP electrodes separately **Order WEL electrode(s) and preamplifier housing(s) separately B15 Jan 2015

55 WDS600 Series Disinfection Controllers W600 WDS RELAYS/ WIRING INPUT CARDS ANALOG OUTPUTS ETHERNET SENSORS PART # / CODE DESCRIPTION PRICE (adder) WDS Disinfection Controller BASE $ RELAYS/WIRING 600H 6 powered relays, Hardwired N/C 600P 6 powered relays, Prewired with USA cords and pigtails D 6 powered relays, Prewired with DIN power cord, no pigtails H 2 powered 4 dry relays, Hardwired N/C 610P 2 powered 4 dry relays, Prewired with USA cord and 2 pigtails D 2 powered 4 dry relays, Prewired with DIN power cord, no pigtails H 2 opto 4 dry relays, Hardwired P 2 opto 4 dry relays, Prewired with USA cord and two 20 ft. pulse cables D 2 opto 4 dry relays, Prewired with DIN power cord, no pigtails H 4 opto 2 dry relays, Hardwired P 4 opto 2 dry relays, Prewired with USA cord and four 20 ft. pulse cables D 4 opto 2 dry relays, Prewired with DIN power cord, no pigtails INPUT CARDS NN No sensor input cards N/C SN One sensor input card SS Two sensor input cards AN One dual analog input card AA Two dual analog input cards SA One sensor input card and one analog input card ANALOG OUTPUTS N No analog outputs N/C A One dual isolated analog output card ETHERNET N No Ethernet N/C E Ethernet card MANIFOLD NN No sensors or flow switch manifold N/C PN Single DIS manifold on panel* PX DIS manifold plus ph/orp/cooling tower cond tee on panel** FN Single DIS flow cell/cable, no sensor* FF Two DIS flow cell/cable, no sensors* *Order disinfection sensor(s) separately **Order disinfection sensor and WEL electrode and preamplifier housing or cooling tower conductivity sensor separately B15 Jan 2015

56 WCN600 Series Conductivity Controllers W600 WCN RELAYS/ WIRING INPUT CARDS ANALOG OUTPUTS ETHERNET SENSORS PART # / CODE DESCRIPTION PRICE (adder) WCN Conductivity Controller BASE $ RELAYS/WIRING 600H 6 powered relays, Hardwired N/C 600P 6 powered relays, Prewired with USA cords and pigtails D 6 powered relays, Prewired with DIN power cord, no pigtails H 2 powered 4 dry relays, Hardwired N/C 610P 2 powered 4 dry relays, Prewired with USA cord and 2 pigtails D 2 powered 4 dry relays, Prewired with DIN power cord, no pigtails H 2 opto 4 dry relays, Hardwired P 2 opto 4 dry relays, Prewired with USA cord and two 20 ft. pulse cables D 2 opto 4 dry relays, Prewired with DIN power cord, no pigtails H 4 opto 2 dry relays, Hardwired P 4 opto 2 dry relays, Prewired with USA cord and four 20 ft. pulse cables D 4 opto 2 dry relays, Prewired with DIN power cord, no pigtails INPUT CARDS NN No sensor input cards N/C SN One sensor input card SS Two sensor input cards AN One dual analog input card AA Two dual analog input cards SA One sensor input card and one analog input card ANALOG OUTPUTS N No analog outputs N/C A One dual isolated analog output card ETHERNET N No Ethernet N/C E Ethernet card SENSORS NN No sensors or flow switch manifold* N/C *Order conductivity sensor(s) separately B15 Jan 2015

57 W600 Spare Parts W600 Sensors PART # / CODE DESCRIPTION PRICE Cooling Tower Conductivity Sensor, Contacting Conductivity, PP/Graphite, 20 ft. cable Sensor, Contacting Conductivity, PP/Graphite, 3 ft. cable Sensor, Contacting Conductivity, 300 psi, 10 ft. cable Sensor, Contacting Conductivity, PP/SS, 20 ft. cable Sensor, Contacting Conductivity, PP/SS, 3 ft. cable Sensor, Electrodeless Conductivity, CPVC, 20 ft. cable Sensor, Electrodeless Conductivity, CPVC, 3 ft. cable Boiler Conductivity Boiler sensor with ATC, 250 psi, 3/4"NPT, cell constant Boiler sensor without ATC, 250 psi, 3/4" NPT, cell constant Boiler sensor with ATC, 250 psi, 3/4"NPT, cell constant General Conductivity Sensor, Contacting Conductivity, Cell constant 0.01, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 0.1, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 1.0, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 10.0, no gland, 10 ft. cable Sensor, Electrodeless Conductivity, CPVC, 20 ft. cable Sensor, Electrodeless Conductivity, CPVC, 3 ft. cable Sensor, Electrodeless Conductivity, PEEK, 20 ft. cable Sensor, Electrodeless Conductivity, PEEK, 3 ft. cable ph/orp WEL-PHF-NN Electrode, ph, flat WEL-MVF-NN Electrode, ORP, flat WEL-MVR-NN Electrode, ORP, rod Preamp housing, no ATC, 20 ft. cable Preamp housing, no ATC, 3 ft. cable Preamp housing, Pt1000 ATC, 20 ft. cable Preamp housing, Pt1000 ATC, 3 ft. cable External preamplifier, ph/orp Disinfection Chlorine Dioxide Sensor, 2 ppm, no cable 1, Chlorine Dioxide Sensor, 20 ppm, no cable 1, Chlorine Dioxide Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine Sensor, 2 ppm, no cable 1, Free Chlorine/Bromine Sensor, 20 ppm, no cable 1, Free Chlorine/Bromine Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine Sensor, ext. ph range, 20 ppm, no cable 1, Hydrogen Peroxide, 20,000 ppm, no cable 2, B15 Jan 2015

58 PART # / CODE DESCRIPTION PRICE Hydrogen Peroxide, 200 ppm, no cable 2, Hydrogen Peroxide, 2000 ppm, no cable 2, Ozone Sensor, 2ppm, no cable 2, Ozone Sensor, 20 ppm, no cable 2, Peracetic Acid Sensor, 20,000 ppm, no cable 2, Peracetic Acid Sensor, 200 ppm, no cable 2, Peracetic Acid Sensor, 2000 ppm, no cable 1, Peracetic Acid Sensor, PEEK, 20,000 ppm, no cable 4, Peracetic Acid Sensor, PEEK, 2000 ppm, no cable 4, Total Chlorine Sensor, 20 ppm, no cable 1, Membrane Cap,2/20 ppm Chlorine Dioxide and 200/2,000 ppm Hydrogen Peroxide and 200/2,000 ppm Peracetic Acid (PVC body) Membrane Cap, 20,000 ppm Peracetic Acid (PVC body) and 20,000 ppm Hydrogen Peroxide Membrane Cap 2000/20,000 ppm, 200 ppm Chlorine Dioxide, Peracetic Acid (PEEK body) Membrane Cap, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Membrane Cap, 20 ppm Free Chlorine/Bromine (Ext ph range) and 20 ppm Total Chlorine Membrane Cap, 2 ppm Ozone Membrane Cap, 20 ppm Ozone Electrolyte, 100 ml, 2/20/200 ppm Chlorine Dioxide Electrolyte, 100 ml, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Electrolyte, 100 ml, 20 ppm Free Chlorine/Bromine (Ext. ph range) Electrolyte, 100 ml, 20 ppm Total Chlorine Electrolyte, 100 ml, 2/20 ppm Ozone Electrolyte, 100 ml, 200/2,000 Peracetic Acid (PVC body) and 2000/20,000 Peracetic Acid (PEEK body) Electrolyte, 100 ml, 20,000 ppm Peracetic Acid (PVC body) Electrolyte, 100 ml, 200/2,000/20,000 ppm Hydrogen Peroxide Membrane Cap Hose rings, QTY 10, for all caps except the standard free chlorine Cable, W100/600 disinfection, 3 ft Cable, W100/600 disinfection, 20 ft Fluorescent Little Dipper 2, PTSA, No Tee 1, Little Dipper 2, Fluorescein, No Tee 1, Sensor Mounting Hardware Nut, Inline Mounting Tee, 3/4" NPTF, Low Pressure contacting conductivity, ph/orp O-Ring, FKM, Low Pressure Sensor Mounting Tee assembly, CPVC electrodeless conductivity, 3/4" NPTF process connections Adapter, inline mounting of CPVC electrodeless conductivity, 2" NPTM Adapter, 316SS, inline mounting of PEEK electrodeless conductivity, 2" NPTM Flow cell with nut, o-ring, and washer kit, for most disinfection sensors Flow cell, acrylic, for PEEK PAA sensors 1, B15 Jan 2015

59 PART # / CODE DESCRIPTION PRICE Washer set, disinfection sensors O-Ring, disinfection sensors Gland, steel, 1/2" NPT, 200 psi, for sensors Gland, PP, 1/2" NPT, 100 psi, for sensors Flow Manifolds and Parts Flow switch manifold, contacting conductivity, 150 psi, 20 ft. cable Flow switch manifold, contacting conductivity, 150 psi, 3 ft. cable Flow switch manifold, contacting conductivity, 300 psi, 4 ft. cable Flow switch manifold, ph/orp, 100 psi, 20 ft. cable Flow switch manifold, ph/orp, 100 psi, 3 ft. cable Flow switch manifold, electrodeless conductivity, 150 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity, 150 psi, 3 ft. cable Flow switch manifold, disinfection, 150 psi (flow switch)/15 psi (sensor), 20 ft. cable Flow switch manifold, disinfection, 150 psi (flow switch)/15 psi (sensor), 3 ft. cable Flow switch manifold, electrodeless conductivity + ph or ORP, 100 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity + ph or ORP, 100 psi, 20 ft. cable Flow switch manifold, contacting conductivity + ph or ORP, 100 psi, 20 ft. cable Flow switch manifold, contacting conductivity + ph or ORP, 100 psi, 3 ft. cable Flow switch manifold, contacting conductivity + Little Dipper 2, 100 psi, 20 ft. cable Flow switch manifold, contacting conductivity + Little Dipper 2, 100 psi, 3 ft. cable Flow switch manifold, disinfection + ph ORP or tower contacting conductivity 100 psi (flow switch)/15 psi (dis. sensor), 20 ft. cable Flow switch manifold, disinfection + ph ORP or tower contacting conductivity, 100 psi (flow switch)/15 psi (dis. sensor), 3 ft. cable Flow switch manifold, electrodeless conductivity + Little Dipper 2, 100 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity + Little Dipper 2, 100 psi, 3 ft. cable Flow switch manifold, dual ph/orp, 100 psi, 20 ft. cable Flow switch manifold, dual ph/orp, 100 psi, 3 ft. cable Flow switch (complete), low pressure, 20 ft. cable Flow switch (complete), low pressure, 3 ft. cable Switch & Float assembly, low pressure, 20 ft. cable Switch & Float assembly, low pressure, 3 ft. cable Float, low pressure flow switch Reed switch, low pressure flow switch, 20 ft. cable Reed switch, low pressure flow switch, 3 ft. cable O-ring, float retaining, low pressure flow switch Sample valve, low pressure manifold Flow Switch Body (Tee), low pressure flow switch Flow switch, high pressure Sample valve, high pressure Hanger, pipe, mm, CLIC Screw, 10-32, 5/8" long B15 Jan 2015

60 PART # / CODE DESCRIPTION PRICE Panel, 11.8" x 13" Panel, 11.8" x 22.5" Tee, 3/4"NPT, black iron Panel, 19" x 24" Hanger, pipe, mm CLIC Hanger, pipe, 28 mm, CLIC Rotameter Valve, 1/4" x 1/4" Washer set Clip ring O-ring, washer 1.20 Circuit Boards Spare, front panel, W Spare, sensor board, W Spare, analog input, W Spare, analog output, W Spare, Ethernet board, W Spare, power relay board, 6P/0D, W Spare, power relay board, 2P/4D, W Spare, power relay board, 2O/4D, W Spare, power relay board, 4O/2D, W Fuses Fuse, 6.3 A, powered relay models only 3.70 Misc Controller Parts Power switch Safety cover, W Ribbon cable, W Cable, W600 power switch Power cord Pigtail Locknut, 3/4" Strain relief, 1 hole insert, Ethernet Strain relief, 1 hole insert, Power cord Strain relief, 1 hole insert, Sensor Strain relief, 3 hole insert, pigtails Strain relief, 6 hole insert, DI Strain relief, 3 hole insert, AO 6.00 Cable Extension Junction box Cable, 1 Pair, Shielded, 22 AWG (to extend watermeter cables) $1.00/ft Cable, 4 conductor with shield (to extend contacting conductivity sensor cables) $0.78/ft Cable, 3 twisted pair, shielded, 24 AWG (to extend ph/orp, Disinfection) $2.10/ft Cable, 1 pair, unshielded (to extend flow switch cables) $0.66/ft Cable, 3 twisted pair, 2 shields, 22 AWG (to extend electrodeless conductivity sensor cables) $1.40/ft B15 Jan 2015

61 WCNP100 1/4 DIN Panel Mount Conductivity, ph/orp, Disinfection W100P WCNP - RELAYS/ WIRING ANALOG OUTPUT SENSORS PART # / CODE DESCRIPTION PRICE (adder) WCNP ¼ DIN Panel Mount Conductivity, ph, ORP, Disinfection Controller $ RELAYS/WIRING dry relays N/C pulse, 2 dry relay ANALOG OUTPUTS A One isolated analog output N/C SENSORS N No sensor n/c WPHBP100 1/4 DIN Panel Mount Non-Preamplified ph/orp with BNC WPHBP - RELAYS/ WIRING ANALOG OUTPUT SENSORS PART # / CODE DESCRIPTION PRICE (adder) WPHBP ¼ DIN Panel Mount Non-Preamplified ph/orp with BNC Controller $ RELAYS/WIRING dry relays N/C pulse, 2 dry relay ANALOG OUTPUTS A One isolated analog output N/C SENSORS N No sensor n/c WPHNP100 1/4 DIN Panel Mount Non-Preamplified ph/orp without BNC WPHNP - RELAYS/ WIRING ANALOG OUTPUT SENSORS PART # / CODE DESCRIPTION PRICE (adder) WPHNP ¼ DIN Panel Mount Non-Preamplified ph/orp without BNC Controller $ RELAYS/WIRING dry relays N/C pulse, 2 dry relay ANALOG OUTPUTS A One isolated analog output N/C SENSORS N No sensor n/c B15 Jan 2015

62 WCNW100 Generic Conductivity Controllers W100W WCNW - RELAYS/ WIRING ANALOG OUTPUT SENSORS PART # / CODE DESCRIPTION PRICE (adder) WCNW Generic Conductivity Controller $ RELAYS/WIRING 100H 3 powered relays, Hardwired n/c 100P 3 powered relays, Prewired with USA cords and pigtails D 3 powered relays, Prewired with DIN power cord, no pigtails H 3 dry relays, Hardwired n/c 110P 3 dry relays, Prewired with USA power cord, no pigtails D 3 dry relays, Prewired with DIN power cord, no pigtails H 2 pulse, 1 dry relay, Hardwired n/c 120P 2 pulse, 1 dry relay, Prewired with USA power cord, no pigtails D 2 pulse, 1 dry relay, Prewired with DIN power cord, no pigtails ANALOG OUTPUTS N No analog output n/c A One isolated analog output SENSORS N No sensor n/c A PEEK Electrodeless, Submersion, 20 ft cable B CPVC Electrodeless, Submersion, 20 ft cable C PEEK Electrodeless, 316 SS Inline adapter (no 2 tee), 20 ft cable 1, D CPVC Electrodeless, CPVC Inline adapter (no 2 tee), 20 ft cable E CPVC Electrodeless, with Flow Switch manifold on panel, 3 ft cable prewired F Contacting 1.0 cell constant, 100 psi inline/submersion gland, 10 ft cable G Contacting 0.1 cell constant, 100 psi inline/submersion gland, 10 ft cable H Contacting 10.0 cell constant, 100 psi inline/submersion gland, 10 ft cable I Contacting 0.01 cell constant, 100 psi inline/submersion gland, 10 ft cable J Contacting 1.0 cell constant, 200 psi inline gland, 10 ft cable K Contacting 0.1 cell constant, 200 psi inline gland, 10 ft cable L Contacting 10.0 cell constant, 200 psi inline gland, 10 ft cable M Contacting 0.01 cell constant, 200 psi inline gland, 10 ft cable B15 Jan 2015

63 WDSW100 Disinfection Controllers W100W WDSW - RELAYS/ WIRING ANALOG OUTPUT SENSORS PART # / CODE DESCRIPTION PRICE (adder) WDSW Disinfection Controller $ RELAYS/WIRING 100H 3 powered relays, Hardwired n/c 100P 3 powered relays, Prewired with USA cords and pigtails D 3 powered relays, Prewired with DIN power cord, no pigtails H 3 dry relays, Hardwired n/c 110P 3 dry relays, Prewired with USA power cord, no pigtails D 3 dry relays, Prewired with DIN power cord, no pigtails H 2 pulse, 1 dry relay, Hardwired n/c 120P 2 pulse, 1 dry relay, Prewired with USA power cord, no pigtails D 2 pulse, 1 dry relay, Prewired with DIN power cord, no pigtails ANALOG OUTPUTS N No analog output n/c A One isolated analog output SENSORS N No sensor n/c A Free chlorine with flow cell, 0-20 ppm, 20 ft cable 1, B ClO2 with flow cell, 0-20 ppm, 20 ft cable 1, C Ozone with flow cell, 0-20 ppm, 20 ft cable 2, D PAA with flow cell, ppm, 20 ft cable 2, E Extended ph range free chlorine with flow cell, 0-20 ppm, 20 ft cable 1, F Total chlorine with flow cell, 0-20 ppm, 20 ft cable 2, G Peroxide with flow cell, ppm, 20 ft cable 2, H Free chlorine with manifold on panel, 0-20 ppm, 3 ft cable prewired 2, I ClO2 with manifold on panel, 0-20 ppm, 3 ft cable prewired 2, J Ozone with manifold on panel, 0-20 ppm, 3 ft cable prewired 3, K PAA with manifold on panel, ppm, 3 ft cable prewired 2, L Ext ph range Cl2 with manifold on panel, 0-20 ppm, 3 ft cable prewired 2, M Total chlorine with manifold on panel, 0-20 ppm, 3 ft cable prewired 2, O Peroxide with manifold on panel, ppm, 3 ft cable prewired 3, P No sensor with manifold on panel, 3 ft cable prewired NOTE: To order alternate sensor ranges (refer to WDSW100 spare parts on page 48): For sensors on a panel with flow switch manifold, order the controller with sensor option P, plus the alternate sensor part number. For sensors with flow cell, order the controller with sensor option N, plus cable, flow cell and the alternate sensor part number B15 Jan 2015

64 WPHPW100 ph/orp Controllers W100W WPHPW - RELAYS/ WIRING ANALOG OUTPUT SENSORS PART # / CODE DESCRIPTION PRICE (adder) WPHPW ph/orp Controller $ RELAYS/WIRING 100H 3 powered relays, Hardwired n/c 100P 3 powered relays, Prewired with USA cords and pigtails D 3 powered relays, Prewired with DIN power cord, no pigtails H 3 dry relays, Hardwired n/c 110P 3 dry relays, Prewired with USA power cord, no pigtails D 3 dry relays, Prewired with DIN power cord, no pigtails H 2 pulse, 1 dry relay, Hardwired n/c 120P 2 pulse, 1 dry relay, Prewired with USA power cord, no pigtails D 2 pulse, 1 dry relay, Prewired with DIN power cord, no pigtails ANALOG OUTPUTS N No analog output n/c A One isolated analog output SENSORS N No sensor n/c A No sensor, w/ external preamp, 20 ft cable prewired B ph, Submersion, flat surface, no ATC, 20 ft cable C ph, Submersion, flat surface, with ATC, 20 ft cable D ph, inline tee, flat surface, no ATC, 20 ft cable E ph, inline tee, flat surface, with ATC, 20 ft cable F ph, flat surface, w/ ATC, w/ Flow Switch manifold on panel, 3 ft cable prewired G ORP, Submersion, flat surface, 20 ft cable H ORP, inline tee, flat surface, 20 ft cable I ORP, inline tee, rod-style, 20 ft cable J ORP, flat surface, with Flow Switch manifold on panel, 3 ft cable prewired K ORP, rod-style w/ Flow Switch manifold on panel, 3 ft cable prewired NOTE: See the WEL and WDS Series ph/orp Electrode prices for additional electrode options, such as bulb style ph, HF resistant ph, housings that provide automatic temperature compensation (ATC), and metric in-line mounting. To order: order the WPH controller with the option N, and then order the appropriate WEL or WDS electrode. Make sure to specify either WEL housing option 7 or 8, which contain a preamplifier, or WDS with the W preamplifier B15 Jan 2015

65 WPHBW100 Non-Amplified ph/orp Controllers with BNC W100W WPHBW - RELAYS/ WIRING ANALOG OUTPUT SENSORS PART # / CODE DESCRIPTION PRICE (adder) WPHBW Non-Amplified ph/orp Controller with BNC $ RELAYS/WIRING 100H 3 powered relays, Hardwired n/c 100P 3 powered relays, Prewired with USA cords and pigtails D 3 powered relays, Prewired with DIN power cord, no pigtails H 3 dry relays, Hardwired n/c 110P 3 dry relays, Prewired with USA power cord, no pigtails D 3 dry relays, Prewired with DIN power cord, no pigtails H 2 pulse, 1 dry relay, Hardwired n/c 120P 2 pulse, 1 dry relay, Prewired with USA power cord, no pigtails D 2 pulse, 1 dry relay, Prewired with DIN power cord, no pigtails ANALOG OUTPUTS N No analog output n/c A One isolated analog output SENSORS N No sensor n/c WPHNW100 Non-Amplified ph/orp Controllers without BNC WPHNW - RELAYS/ WIRING ANALOG OUTPUT SENSORS PART # / CODE DESCRIPTION PRICE (adder) WPHNW Non-Amplified ph/orp Controller without BNC $ RELAYS/WIRING 100H 3 powered relays, Hardwired n/c 100P 3 powered relays, Prewired with USA cords and pigtails D 3 powered relays, Prewired with DIN power cord, no pigtails H 3 dry relays, Hardwired n/c 110P 3 dry relays, Prewired with USA power cord, no pigtails D 3 dry relays, Prewired with DIN power cord, no pigtails H 2 pulse, 1 dry relay, Hardwired n/c 120P 2 pulse, 1 dry relay, Prewired with USA power cord, no pigtails D 2 pulse, 1 dry relay, Prewired with DIN power cord, no pigtails ANALOG OUTPUTS N No analog output n/c A One isolated analog output SENSORS N No sensor n/c B15 Jan 2015

66 Spare Parts for WCNW100, WDSW100, WPHPW100, PHN & PHB W100W PART # / CODE DESCRIPTION PRICE $$ Sensors Disinfection Chlorine Dioxide Sensor, 2 ppm, no cable 1, Chlorine Dioxide Sensor, 20 ppm, no cable 1, Chlorine Dioxide Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine Sensor, 2 ppm, no cable 1, Free Chlorine/Bromine Sensor, 20 ppm, no cable 1, Free Chlorine/Bromine Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine Sensor, ext. ph range, 20 ppm, no cable 1, Hydrogen Peroxide, 20,000 ppm, no cable 2, Hydrogen Peroxide, 200 ppm, no cable 2, Hydrogen Peroxide, 2000 ppm, no cable 2, Ozone Sensor, 20 ppm, no cable 2, Peracetic Acid Sensor, 20,000 ppm, no cable 2, Peracetic Acid Sensor, 200 ppm, no cable 2, Peracetic Acid Sensor, 2000 ppm, no cable 1, Peracetic Acid Sensor, PEEK, 20,000 ppm, no cable 4, Peracetic Acid Sensor, PEEK, 2000 ppm, no cable 4, Total Chlorine Sensor, 20 ppm, no cable 1, Membrane Cap,2/20 ppm Chlorine Dioxide and 200/2,000 ppm Hydrogen Peroxide and 200/2,000 ppm Peracetic Acid (PVC body) Membrane Cap, 20,000 ppm Peracetic Acid (PVC body) and 20,000 ppm Hydrogen Peroxide Membrane Cap 2000/20,000 ppm, 200 ppm Chlorine Dioxide, Peracetic Acid (PEEK body) Membrane Cap, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Membrane Cap, 20 ppm Free Chlorine/Bromine (Ext ph range) and 20 ppm Total Chlorine Membrane Cap, 20 ppm Ozone Electrolyte, 100 ml, 2/20/200 ppm Chlorine Dioxide Electrolyte, 100 ml, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Electrolyte, 100 ml, 20 ppm Free Chlorine/Bromine (Ext. ph range) Electrolyte, 100 ml, 20 ppm Total Chlorine Electrolyte, 100 ml, 2/20 ppm Ozone Electrolyte, 100 ml, 200/2,000 Peracetic Acid (PVC body) and 2000/20,000 Peracetic Acid (PEEK body) Electrolyte, 100 ml, 20,000 ppm Peracetic Acid (PVC body) Electrolyte, 100 ml, 200/2,000/20,000 ppm Hydrogen Peroxide Membrane Cap Hose rings, QTY 10, for all caps except the standard free chlorine Cable, W100/600 disinfection, 3 ft Cable, W100/600 disinfection, 20 ft General Conductivity Sensor, Contacting Conductivity, WCNW1, Cell constant 0.01, no gland, 10 ft. cable Sensor, Contacting Conductivity, WCNW1, Cell constant 0.1, no gland, 10 ft. cable Sensor, Contacting Conductivity, WCNW1, Cell constant 1.0, no gland, 10 ft. cable Sensor, Contacting Conductivity, WCNW1, Cell constant 10.0, no gland, 10 ft. cable Sensor, Electrodeless Conductivity, WCNW1/WCTW1, CPVC, 20 ft. cable Sensor, Electrodeless Conductivity, WCNW1/WCTW1, CPVC, 3 ft. cable Sensor, Electrodeless Conductivity, WCNW1, PEEK, 20 ft. cable Sensor, Electrodeless Conductivity, WCNW1, PEEK, 3 ft. cable B15 Jan 2015

67 ph/orp WEL-PHF-NN Electrode, ph, flat WEL-MVF-NN Electrode, ORP, flat WEL-MVR-NN Electrode, ORP, rod Preamp housing, no ATC, 20 ft cable Preamp housing, no ATC, 3 ft cable Preamp housing, Pt1000 ATC, 20 ft cable Preamp housing, Pt1000 ATC, 3 ft cable External preamplifier, ph/orp Sensor Mounting Hardware Nut, Inline Mounting Tee, 3/4" NPTF, Low Pressure contacting conductivity, ph/orp O-Ring, FKM, Low Pressure Sensor Mounting Tee assembly, CPVC electrodeless conductivity, 3/4" NPTF process connections Adapter, inline mounting of CPVC electrodeless conductivity, 2" NPTM Adapter, 316SS, inline mounting of PEEK electrodeless conductivity, 2" NPTM Flow cell with nut, o-ring, and washer kit, for most disinfection sensors Flow cell, acrylic, for PEEK PAA sensors 1, Washer set, disinfection sensors O-Ring, disinfection sensors Gland, steel, 1/2" NPT, 200 psi, for sensors Gland, PP, 1/2" NPT, 100 psi, for sensors Flow Manifolds and Parts Flow switch manifold, ph/orp, 100 psi, 20 ft cable Flow switch manifold, ph/orp, 100 psi, 3 ft cable Flow switch manifold, electrodeless conductivity, 150 psi, 20 ft cable Flow switch manifold, electrodeless conductivity, 150 psi, 3 ft cable Flow switch manifold, disinfection, 150 psi (flow switch)/15 psi (sensor), 20 ft cable Flow switch manifold, disinfection, 150 psi (flow switch)/15 psi (sensor), 3 ft cable Flow switch (complete), low pressure, 20 ft cable Flow switch (complete), low pressure, 3 ft cable Switch & Float assembly, low pressure, 20 ft cable Switch & Float assembly, low pressure, 3 ft cable Float, low pressure flow switch Reed switch, low pressure flow switch, 20 ft cable Reed switch, low pressure flow switch, 3 ft cable O-ring, float retaining, low pressure flow switch Sample valve, low pressure manifold Flow Switch Body (Tee), low pressure flow switch Hanger, pipe, mm, CLIC Screw, 10-32, 5/8" long Panel, 11.8" x 22.5" Hanger, pipe, mm CLIC Panel, 19" x 24" Hanger, pipe, 28 mm, CLIC Rotameter Valve, 1/4" x 1/4" Washer set Clip ring O-ring, washer B15 Jan 2015

68 Circuit Boards FPA, WCTW1, WBLW1, WCNW1 no AO FPA, WCTW1, WBLW1, WCNW1 with AO FPA, WPHPW1, WPHBW1, WPHNW1, WDSW1, no AO FPA, WPHPW1, WPHBW1, WPHNW1, WDSW1, with AO Power relay board, W100, 3 powered, non-passive Power relay board, W110, 3 dry, non-passive Power relay board, W120, 2 opto, 1 dry, non-passive Power relay board, W100, 3 powered, passive ph/orp Power relay board, W110, 3 dry, passive ph/orp Power relay board, W120, 2 opto, 1 dry, passive ph/orp Fuses Fuse, 6.3 A, powered relay models (W100) only 3.70 Miscellaneous Controller Parts Ribbon cable BNC connector assembly, W BNC cap, W Safety cover, W Power switch, W Cable, W100 Power switch Power cord, W Pigtail, W Strain relief, 3 hole insert, 3/4" NPT Locknut, 3/4" Strain relief, 3 hole insert, small Strain relief, 1 hole insert, small 5.00 Cable Extension Junction box Cable, 1 Pair, Shielded, 22 AWG (to extend watermeter cables) $1.00/ft Cable, 4 conductor with shield (to extend contacting conductivity sensor cables) $0.78/ft Cable, 3 twisted pair, shielded, 24 AWG (to extend ph/orp, Disinfection) $2.10/ft Cable, 1 pair, unshielded (to extend flow switch cables) $0.66/ft Cable, 3 twisted pair, 2 shields, 22 AWG (to extend electrodeless conductivity sensor cables) $1.40/ft Accessories Buffer, ph 4.00, pint Buffer, ph 7, pint Buffer, ph 10, pint Quinhydrone, 20 grams ORP calibration kit B15 Jan 2015

69 WDIS400 Series Disinfection Controller W400 WDIS410 - U PART # / CODE DESCRIPTION PRICE (adder) WDIS410 Disinfection Controller $1, WIRING OPTIONS VAC, Prewired w/usa power cord and 6" pigtails Hardwired, cable glands n/c DATA OUTPUT N No 4-20 ma output n/c 4 Single Isolated 4-20 ma output Two (2) Isolated 4-20 ma outputs SENSOR OPTIONS N No sensor n/c USB 1 Free Chlorine/Bromine sensor, 0-20 ppm, w/flow cell and 20 ft. cable 1, Chlorine Dioxide sensor, 0-20 ppm, w/flow cell and 20 ft. cable 1, Ozone sensor, 0-20 ppm, w/flow cell and 20 ft. cable 2, Peracetic Acid sensor, ppm, w/flow cell and 20 ft. cable 2, A Free Chlorine/Bromine sensor, 0-20 ppm, ext. ph range w/flow cell and 20 ft. cable 1, Free Chlorine/Bromine sensor, 0-20 ppm, w/flow manifold and 5 ft. cable on panel 2, Chlorine Dioxide sensor, 0-20 ppm, w/flow manifold and 5 ft. cable on panel 2, Ozone sensor, 0-20 ppm, w/flow manifold and 5 ft. cable on panel 3, Peracetic Acid sensor, ppm, w/flow manifold and 5 ft. cable on panel 2, Free Chlorine/Bromine sensor, 0-20 ppm, ext. ph range, w/flow cell and 5 ft. B cable on panel 2, U Integrated datalogging and config file import/export via USB flash stick n/c Spare Parts PART # / CODE DESCRIPTION PRICE Fuses Fuse, 1 Amp, F1 for all W400 series Fuse, 6 Amp, F2 for all W400 Series Fuse, 125 ma, F1 for all 120V W300 series Fuse, 5 amp, F2 for all 240V W300 series Fuse, 10 amp, F2 for all 120V W300 series Fuse, 63 ma, F1 for all 240V W300 series 3.70 W400 Circuit Boards Label/Panel Assembly, WDIS410-U Power/Relay Board, WDIS Option Board, 4-20 ma output, W400 series W300 Circuit Boards WIRING DATA SENSOR USB OUTPUT OPTIONS Label/Panel Assembly, WDIS310, Obsolete Consult Factory Power Supply Board, 120V, WDIS Power Supply Board, 240V, WDIS ma Option Board, W300 series B15 Jan 2015

70 PART # / CODE DESCRIPTION PRICE Other Power Cord, 115V, Male Power Cord, 115V, Female Cable Assembly, Power, W300 Series Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Housing, Switch Cable W400 Ribbon Sensors and Sensor Parts PART # / CODE DESCRIPTION PRICE Complete disinfection sensor, cable and flow cell assemblies (used without flow switch manifolds) WFCB-20 Free Chlorine/Bromine Sensor, 20 ppm, Flow Cell, 20 ft. cable 1, WFCBL-20 Free Chlorine/Bromine Sensor, 2 ppm, Flow Cell, 20 ft. cable 1, WFCBH-20 Free Chlorine/Bromine Sensor, 200 ppm, Flow Cell, 20 ft. cable 1, WFCXB-20 Free Chlorine/Bromine Sensor, ext. ph range, 20 ppm, Flow Cell, 20 ft. cable 1, WTCB-20 Total Chlorine Sensor, 20 ppm, Flow cell, 20 ft. cable 2, WCDB-20 Chlorine Dioxide Sensor, 20 ppm, Flow Cell, 20 ft. cable 1, WCDBL-20 Chlorine Dioxide Sensor, 2 ppm, Flow Cell, 20 ft. cable 1, WCDBH-20 Chlorine Dioxide Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, WOZB-20 Ozone Sensor, 20 ppm, Flow Cell, 20 ft. cable 2, WPAB-20 Peracetic Acid Sensor, 2000 ppm, Flow Cell, 20 ft. cable 2, WPABL-20 Peracetic Acid Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, WPABH-20 Peracetic Acid Sensor, 20,000 ppm, Flow Cell, 20 ft. cable 2, WPAPK-20 Peracetic Acid Sensor, PEEK, 20,000 ppm, Acrylic Flow Cell, 20 ft. cable 5, WPAPKL-20 Peracetic Acid Sensor, PEEK, 2000 ppm, Acrylic Flow Cell, 20 ft. cable 6, WHPB-20 Hydrogen Peroxide Sensor, 2000 ppm, Flow Cell, 20 ft. cable 2, WHPBL-20 Hydrogen Peroxide Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, WHPBH-20 Hydrogen Peroxide Sensor, 20,000 ppm, Flow Cell, 20 ft. cable 2, Disinfection sensor and cable assemblies (purchased in conjunction with flow switch manifolds) Free Chlorine/Bromine, 20 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, 2 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, 200 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, ext. ph range, 20 ppm, 20 ft. cable, no mounting hardware 1, Total Chlorine, 20 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide, 20 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide, 2 ppm, 20 ft. cable, no mounting hardware 1, B15 Jan 2015

71 PART # / CODE DESCRIPTION PRICE Chlorine Dioxide, 200 ppm, 20 ft. cable, no mounting hardware 1, Ozone, 20 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, 2000 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, 200 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, PVC, 20,000 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 2000 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 200 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 20,000 ppm, 20 ft. cable, no mounting hardware 2, Flow switch manifolds Disinfection manifold, loose Disinfection manifold, on polypro panel Valve, Labcock, 1/4"MPT x 1/4"MPT Replacement disinfection sensors Chlorine Dioxide Sensor, 2 ppm, no cable 1, Chlorine Dioxide Sensor, 20 ppm, no cable 1, Chlorine Dioxide Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine Sensor, 2 ppm, no cable 1, Free Chlorine/Bromine Sensor, 20 ppm, no cable 1, Free Chlorine/Bromine Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine Sensor, ext. ph range, 20 ppm, no cable 1, Hydrogen Peroxide, 20,000 ppm, no cable 2, Hydrogen Peroxide, 200 ppm, no cable 2, Hydrogen Peroxide, 2000 ppm, no cable 2, Ozone Sensor, 20 ppm, no cable 2, Peracetic Acid Sensor, 20,000 ppm, no cable 2, Peracetic Acid Sensor, 200 ppm, no cable 2, Peracetic Acid Sensor, 2000 ppm, no cable 1, Peracetic Acid Sensor, PEEK, 20,000 ppm, no cable 4, Peracetic Acid Sensor, PEEK, 2000 ppm, no cable 4, Total Chlorine Sensor, 20 ppm, no cable 1, Membrane caps Membrane Cap 2/20 ppm, Chlorine Dioxide and 200/2,000 ppm Hydrogen Peroxide and 200/2,000 ppm Peracetic Acid (PVC body) Membrane Cap, 20,000 ppm Peracetic Acid (PVC body) and 20,000 ppm Hydrogen Peroxide Membrane Cap 2000/20,000 ppm, 200 ppm Chlorine Dioxide, Peracetic Acid (PEEK body) Membrane Cap, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Membrane Cap, 20 ppm Free Chlorine/Bromine (Ext ph range) and 20 ppm Total Chlorine Membrane Cap, 20 ppm Ozone Electrolyte Electrolyte, 100 ml, 2/20/200 ppm Chlorine Dioxide Electrolyte, 100 ml, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Electrolyte, 100 ml, 20 ppm Free Chlorine/Bromine (Ext. ph range) Electrolyte, 100 ml, 20 ppm Total Chlorine Electrolyte, 100 ml, 2/20 ppm Ozone Electrolyte, 100 ml, 200/2,000 Peracetic Acid (PVC body) and 2000/20,000 Peracetic Acid (PEEK body) Electrolyte, 100 ml, 20,000 ppm Peracetic Acid (PVC body) B15 Jan 2015

72 PART # / CODE DESCRIPTION PRICE Electrolyte, 100 ml, 200/2,000/20,000 ppm Hydrogen Peroxide Isoplast flow cell parts Flow Cell Assembly, Disinfection sensors In-Line Mounting Nut O-Ring, FKM, for low pressure sensor mounting R Flow Cell Body Washer Set Clip Ring O-Ring, Washer 1.20 Acrylic flow cell Acrylic Flow Cell (used with PEEK Peracetic Acid sensors) 1, Cables Cable, Disinfection sensors, 20 ft Cable, Disinfection sensors, 5 ft Flow switch manifold parts Float, low pressure flow switch Switch, low pressure flow switch, 20 ft cable Switch Housing Assembly, 4 ft cable O-Ring, float retaining Flow switch, low pressure, complete Flow switch, high pressure Sample Valve, low pressure Sample Valve, high pressure Flow Switch Body (Tee) Rotameter Valve, Labcock, 1/4"MPT x 1/4"MPT Screw, 8-32 x 3/4 FH SS Nut, 8-32 Keps SS Hanger, Pipe, 36-39mm, Clic Hanger, Pipe, mm, Clic Nipple, 3/4" Close CPVC Schedule Tee, 3/4" PVC,T x T x T, Schedule Adapter, 3/4"MNPT x 1/4"FNPT, PVC B15 Jan 2015

73 WPH410/420 Series ph/orp Controllers W400 WPH4 0 - CONTROL VOLTAGE OUTPUT ELECTRODE USB U PART # / CODE DESCRIPTION PRICE(adder) WPH410 ph/orp Controller, on/off control outputs $ WPH420 ph/orp Controller, proportional control outputs $ VOLTAGE VAC, pre-wired with 6 pigtails (WPH410) or with 20 cables (WPH420) VAC, pre-wired WPH420 with 20 cables, with (2) E90495 connectors for EW pumps Hardwired, cable glands n/c DATA OUTPUT N No 4-20 ma output n/c 4 Single Isolated 4-20 ma output Two (2) Isolated 4-20 ma outputs OPTIONS N None n/c 1 Preamplifier (190783) w/10 ft. cable, pre-wired Submersion flat ph electrode w/preamp (WEL-PHF-21) In-line flat ph electrode w/preamp (WEL-PHF-22) - includes 3/4 NPTF tee In-line flat ph electrode, preamp (WEL-PHF-22) and flow switch mounted to panel T In-line flat ph electrode with ATC, preamp (WEL-PHF-12) and flow switch mounted to panel Submersion ORP electrode w/preamp (WEL-MVF-21) In-line ORP electrode w/preamp (WEL-MVF-22) - includes 3/4 NPTF tee R In-line rod style ORP electrode w/preamp (WEL-MVR-22) - includes 3/4 NPTF tee In-line ORP electrode w/preamp (WEL-MVF-22) and flow switch mounted to panel R In-line rod style ORP electrode w/preamp (WEL-MVR-22) and flow switch mounted to panel USB U Integrated datalogging and config file import/export via USB flash stick n/c NOTE: See the WEL Series ph/orp Electrode prices for additional electrode options, such as bulb style ph, HF resistant ph, housings that provide automatic temperature compensation (ATC), and metric in-line mounting. To order: order the WPH controller with the option N, and then order the appropriate WEL electrode. Make sure to specify either WEL housing option 1 or 2, which contain a preamplifier B15 Jan 2015

74 Spare Parts PART # / CODE DESCRIPTION PRICE Fuses Fuse, 1 Amp, F1 for all W400 Series Fuse, 6 Amp, F2 for all W400 Series Fuse, 5 Amp, F2 for 240V W300 Series Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 10 Amp, F2 for 120V W300 Series Fuse, 1/16 Amp, F1 for 240V W300 Series 3.70 W400 Circuit Boards mA Option Board, W400 series Power/Relay Board, WPH Power/Relay Board, WPH Label/Panel Assembly, WPH/DP410-U Label/Panel Assembly, WPH/DP420-U W300 Circuit Boards Label/Panel Assembly, WPH310, Obsolete Consult Factory Label/Panel Assembly, WPH320, Obsolete Consult Factory Power Supply Board, 120 V, on/off, WPH Power Supply Board, 240 V, on/off, WPH Power Supply Board, 120 V, proportional, WPH320, Obsolete Consult Factory Power Supply Board, 240 V, proportional, WPH320, Obsolete Consult Factory ma option board, W300 Series Electrodes & Preamplifiers WEL-PHF-NN Electrode, ph, cartridge only WEL-MVF-NN Electrode, ORP, cartridge only WEL-MVR-NN Electrode, ORP, rod style only Housing with preamplifier with 5 ft. cable (used in options 4 and 7) Housing with preamplifier, 20 ft. cable (used in options 2, 3, 5, 6) Housing with preamplifier, 20 ft. cable and ATC (used in option 4T) Preamp Housing, ph/orp, 5 Ft Cable, ATC Preamplifier, ph/orp (used in option #1) Electrode Mounting Parts Tee, 3/4 threaded, for WEL electrode (adapter/tee combination) Nut, for WEL electrode mounting O-Ring, FKM, for low pressure sensor mounting Adapter, WEL electrode, USA, for standard 1-1/4 tee Flow Switch Manifolds Flow switch manifold, ph/orp, 20 ft cable B15 Jan 2015

75 PART # / CODE DESCRIPTION PRICE Flow Switch Manifold Parts Float, for manifold Reed switch, for manifold, 20 ft cable Switch Housing Assembly, 4 ft cable O-ring, float retaining, for manifold Sample valve, low pressure Flow switch, 150 psi Flow switch assembly, 20 ft. cable Flow Switch Body (Tee) Screw, 8-32 x 3/4 FH SS Nut, 8-32 Keps SS Panel, Mounting, 24 x Hanger, Pipe, 36-39mm, Clic Hanger, Pipe, mm, Clic Nipple, 3/4" Close CPVC Schedule Tee, 3/4" PVC,T x T x T, Schedule Adapter, 3/4"MNPT x 1/4"FNPT, PVC 8.30 Other Power Cord, 115V, Male Power Cord, 115V, Female Cable Assembly, ph Preamp, 10 Ft Cable Assembly, Power, W300 Series Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Housing, Switch Cable W400 Ribbon Accessories PRICE Filter, Mains Power, 20 Amp Kit, Tee ¾", Nut & o-ring, Little Dipper E90495 Connector, 5 pin, EW/EW-Y Tee, 1 1/4 PVC Junction box Cable, 3 twisted pair, shielded, 24 AWG (used to extend ph/orp ) 2.10/ft Buffer, ph 4.00, pint Buffer, ph 7, pint Buffer, ph 10, pint Quinhydrone, 20 grams ORP calibration kit B15 Jan 2015

76 WDP410/420/440 Series Dual Input ph/orp Controllers W400 WDP4 0 - CONTROL U VOLTAGE DATA OPTIONS USB PART # / CODE DESCRIPTION PRICE (adder) WDP410 ph/orp Controller, with 4 on/off control outputs and diagnostic alarm relay $1, WDP420 ph/orp Controller, w/ 2 pulse proportional and 2 on/off control outputs and diagnostic alarm relay $1, WDP440 ph/orp Controller, with 4 pulse proportional control outputs and diagnostic alarm relay $1, VOLTAGE VAC, pre-wired with 6 pigtails (if on/off) or with 20 ft. cables for E-Class pumps (if pulse) Hardwired, cable glands n/c Note: To connect 20 ft. cables from WDP420/440 to EW pumps, order one E90495 connector per pump. DATA OUTPUT N No 4-20 ma output n/c 4 Single isolated 4-20 ma output Dual 4-20 ma output SENSOR OPTIONS N No electrode n/c 1 Two preamplifiers (190783) w/10 ft. cables, prewired Two submersion flat ph electrodes without Auto Temp Comp T Two submersion flat ph electrodes with Auto Temp Comp (ph) Two submersion ORP electrodes One each submersion flat ph and ORP electrodes without Auto Temp Comp T One each submersion flat ph and ORP electrodes with Auto Temp Comp (ph) One each in-line flat ph & ORP electrodes w/out Auto Temp Comp - includes 3/4 NPTF tees R One each in-line flat ph & rod style ORP electrodes w/out Auto Temp Comp includes 3/4 NPTF tees One each in-line flat ph and ORP electrodes, without Auto Temp Comp plus flow switch (both electrodes mounted in same sample stream) on panel 1, R One each in-line flat ph and rod style ORP electrodes, without Auto Temp Comp plus flow switch (both electrodes mounted in same sample stream) on panel 1, RT One each in-line flat ph and rod style ORP electrodes, with Auto Temp Comp (ph) plus flow switch (both electrodes mounted in same sample stream) on panel 1, T One each in-line flat ph and ORP electrodes, with Auto Temp Comp (ph) plus flow switch (both electrodes mounted in same sample stream) on panel 1, USB U Integrated datalogging and config file import/export via USB flash stick n/c NOTE: See the WEL Series ph/orp Electrode prices for additional electrode options, such as bulb style ph, HF resistant ph, housings that provide automatic temperature compensation (ATC), and metric in-line mounting. To order: order the WDP controller with the option N, and then order the appropriate WEL electrode. Make sure to specify either WEL housing option 1 or 2, which contain a preamplifier B15 Jan 2015

77 WDP Series Dual Input ph/orp Controllers continued Spare Parts PART # / CODE DESCRIPTION PRICE Fuses Fuse, 1 Amp, F1 for all W400 series Fuse, 6 Amp, F2 for all W400 Series Fuse, 5 Amp, F2 for 240V W300 Series Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 10 Amp, F2 for 120V W300 Series Fuse, 1/16 Amp, F1 for 240V W300 Series 3.70 W400 Circuit Boards Label/Panel Assembly, WPH/DP410-U Label/Panel Assembly, WPH/DP420-U Label/Panel Assembly, WDP440-U Power/Relay Board, WDP Power/Relay Board, WDP Power/Relay Board, WDP Option Board, ph/orp, W400 Series W300 Circuit Boards Option Board, 4-20 ma, W400 Series Option Board, 4-20 ma, W300 series Option board, dual input, WDx300 series Label/Panel Assembly, WDP310, Obsolete Consult Factory Label/Panel Assembly, WDP320, Obsolete Consult Factory Power Supply Board, 120V, WDP Power Supply Board, 240V, WDP Power Supply Board, 120V, WDP340, Obsolete Consult Factory Power Supply Board, 240V, WDP340, Obsolete Consult Factory Label/Panel Assembly, WDP340, Obsolete Consult Factory Power Supply Board, 120V, WDP320, Obsolete Consult Factory Power Supply Board, 240V, WDP320, Obsolete Consult Factory Electrodes & Preamplifiers WEL-PHF-NN Electrode, ph, cartridge only WEL-MVF-NN Electrode, ORP, cartridge only WEL-MVR-NN Electrode, rod style only Housing w/ preamplifier, no ATC, 5 ft. cable Housing w/ preamplifier, no ATC, 20 ft. cable Housing w/ preamplifier, Pt1000 ATC, 20 ft. cable (used in option 8T) Preamp Housing, ph/orp, 5 Ft Cable, ATC Electrode Mounting Parts Tee, 3/4 threaded, for WEL electrode (adapter/tee combination) Nut, for WEL electrode mounting O-Ring, FKM, for low pressure sensor mounting Adapter, WEL electrode, USA, for standard 1-1/4 tee Flow Switch Manifold Flow switch manifold, dual ph/orp, 20 ft cable B15 Jan 2015

78 Flow Switch Manifold Parts Float, for manifold Reed switch, manifold, 20 ft cable Switch Housing Assembly, 4 ft cable O-ring, float retaining, for manifold Sample valve, low pressure Flow switch, 150 psi Flow switch assembly, 20 ft. cable Flow Switch Body (Tee) Screw, 8-32 x 3/4 FH SS Nut, 8-32 Keps SS Panel, Mounting, 24 x Hanger, Pipe, 36-39mm, Clic Hanger, Pipe, mm, Clic Nipple, 3/4" Close CPVC Schedule Other Power Cord, 115V, Male Power Cord, 115V, Female Cable Assembly, Power, W300 Series Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Housing, Switch Cable W400 Ribbon Accessories PART # / CODE DESCRIPTION PRICE Filter, Mains Power, 20 Amp Kit, Tee ¾", Nut & o-ring, Little Dipper E90495 Connector, 5 pin, EW/EW-Y Junction box Cable, 3 Twisted Pair, Shielded, 24 AWG (used to extend ph/orp cable) 2.10/ft Tee, 1 1/4, PVC Buffer, ph 4.00, pint Buffer, ph 7, pint Buffer, ph 10, pint Quinhydrone, 20 grams ORP calibration kit B15 Jan 2015

79 WEC410 Series Electrodeless Conductivity Controller W400 WEC410 - U VOLTAGE OUTPUT SENSOR USB PART # / CODE DESCRIPTION PRICE (adder) WEC410 Electrodeless (Toroidal) Conductivity Controller $ VOLTAGE VAC, prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Single isolated 4-20 ma output Two isolated 4-20 ma outputs SENSOR OPTIONS (20 FT. CABLES) N No sensor n/c ms/cm A Submersion PEEK sensor 1, B In-line PEEK sensor w/stainless steel 2 NPTM adapter 1, C Submersion CPVC sensor D In-line CPVC sensor w/ CPVC 2 NPTM adapter ms/cm E Submersion PEEK sensor 1, F In-line PEEK sensor w/stainless steel 2 NPTM adapter 1, G Submersion CPVC sensor H In-line CPVC sensor w/ CPVC 2 NPTM adapter ms/cm I Submersion PEEK sensor 1, J In-line PEEK sensor w/stainless steel 2 NPTM adapter 1, K Submersion CPVC sensor L In-line CPVC sensor w/ CPVC 2 NPTM adapter ms/cm M Submersion PEEK sensor 1, O In-line PEEK sensor w/stainless steel 2 NPTM adapter 1, P Submersion CPVC sensor Q In-line CPVC sensor w/ CPVC 2 NPTM adapter USB U Integrated datalogging and config file import/export via USB flash stick n/c B15 Jan 2015

80 WDEC410 Series Dual Input Electrodeless Conductivity Controller W400 WDEC410 - U WIRING OPTIONS ANALOG OUTPUT SENSOR SENSOR OPTION 1 OPTION 2 USB PART # / CODE DESCRIPTION PRICE (adder) WDEC410 Dual Input Electrodeless (Toroidal) Conductivity Controller $ WIRING OPTIONS VAC, Prewired Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Single isolated 4-20 ma output Two isolated 4-20 ma outputs SENSOR OPTIONS **SELECT 2 SENSORS** (please order alphabetically. i.e. WDEC410-xxABx) N No sensor n/c ms/cm (20 FT. CABLES) A Submersion PEEK sensor 1, B In-line PEEK sensor w/stainless steel 2 NPTM adapter 1, C Submersion CPVC sensor D In-line CPVC sensor w/ CPVC 2 NPTM adapter ms/cm (20 FT. CABLES) E Submersion PEEK sensor 1, F In-line PEEK sensor w/stainless steel 2 NPTM adapter 1, G Submersion CPVC sensor H In-line CPVC sensor w/ CPVC 2 NPTM adapter ms/cm (20 FT. CABLES) I Submersion PEEK sensor 1, J In-line PEEK sensor w/stainless steel 2 NPTM adapter 1, K Submersion CPVC sensor L In-line CPVC sensor w/ CPVC 2 NPTM adapter ms/cm (20 FT. CABLES) M Submersion PEEK sensor 1, O In-line PEEK sensor w/stainless steel 2 NPTM adapter 1, P Submersion CPVC sensor Q In-line CPVC sensor w/ CPVC 2 NPTM adapter USB U Integrated datalogging and config file import/export via USB flash stick n/c B15 Jan 2015

81 Spare Parts PART # / CODE DESCRIPTION PRICE Fuses Fuse, 1 Amp, F1 for all W400 series Fuse, 6 Amp, F2 for all W400 Series Fuse, 5 Amp, F2 for 240V W300 Series Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 10 Amp, F2 for 120V W300 Series Fuse, 1/16 Amp, F1 for 240V W300 Series 3.70 W400 Circuit Boards Label/Panel Assembly, WEC/WDEC410-U Power/Relay Board, WEC/WDEC mA Output Board, W400 Series Option Board, ph/orp, W400 Series W300 Circuit Boards Label/Panel assembly, WEC Power Supply Board, WEC310, 120 V Power Supply Board, WEC310, 240 V Electrodeless input board, WEC ma option board, W300 Series Electrodes & Adapters Electrodeless, 1 ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC, W Electrodeless, 10 ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC, W Electrodeless, 100 ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC, W Electrodeless, 1000 ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC, W Electrodeless, 1 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK, W400 1, Electrodeless, 10 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK, W400 1, Electrodeless, 100 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK, W400 1, Electrodeless, 1000 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK, W400 1, Electrodeless sensor without mounting adapter, PEEK, donut shape, WEC310 1, Submersion adapter, CPVC, for sensor In-line adapter with nut, CPVC, for sensor Sensor, electrodeless conductivity, 20 ft. cable, Passive, CPVC, WEC Sensor, electrodeless conductivity, 5 ft. Cable, Passive, CPVC CPVC in-line adapter Kit, Inline, Electrodeless, CPVC Sensor, electrodeless conductivity, 20 ft. cable, Passive, PEEK, WEC SS In-Line Adapter for 191xxx PEEK sensor B15 Jan 2015

82 WEC Series Electrodeless Conductivity Controllers continued Spare Parts PART # / CODE DESCRIPTION PRICE Nut, in-line O-Ring, FKM, for low pressure sensor mounting Submersion adapter, 316SS, for sensor In-line adapter, 316SS, for PEEK sensor w/nut Tee, 2 NPTF, CPVC Reducing bushing, 2 x 3/4 NPT, CPVC 9.00 Other Power Cord, 115V, Male Power Cord, 115V, Female Cable Assembly, Power, W300 Series Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Housing, Switch Cable W400 Ribbon Accessories Filter, Mains Power, 20 Amp Cable, 3 Twisted Pair, Shielded, 24 AWG (to extend WEC/WDEC410 sensor) 2.10/ft Extension cable, 25 ft., WEC310 sensor Extension cable, 50 ft., WEC310 sensor Extension cable, 75 ft., WEC310 sensor Extension cable, 100 ft., WEC310 sensor Junction box Test Lead Kit, WEC Kit, Inline, Electrodeless, CPVC B15 Jan 2015

83 WEL Series ph/orp Electrodes WEL - CARTRIDGE HOUSING MOUNTING CARTRIDGE PHF = Flat surface ph PHB = Bulb ph PHH = HF resistant ph MVF = Flat surface ORP HOUSING 1 = Housing with preamplifier & PT 1000 ATC, 20 ft. cable with tinned leads 2 = Housing with preamplifier, 20 ft. cable with tinned leads 3 = Housing with PT 1000 ATC, 20 ft. coaxial cable with BNC connector 4 = Housing, 20 ft. coaxial cable with BNC connector 7 = Housing with preamplifier for W100/W600, PT1000, 20 ft cable with tinned leads 8 = Housing with preamplifier for W100/W600, 20 ft cable with tinned leads MOUNTING STYLE 1 = Submersion mounting 2 = In-line mounting (¾ NPTF tee) 3 = Metric in-line mounting (G 1¼ male adapter) 4 = In-line mounting (1¼ NPT male adapter) PART # / CODE DESCRIPTION PRICE CARTRIDGE WEL-PHF Electrode, ph, flat surface WEL-PHB Electrode, ph, bulb surface WEL-PHH Electrode, ph, flat, HF resistant WEL-MVF Electrode, ORP, flat surface WEL-MVR Electrode, ORP, rod style WEL-PHLI Electrode, ph, low ionic strength (under 100μS/cm) ADDER HOUSINGS 1 Housing with preamplifier and PT 1000 ATC, 20 ft. cable Housing with preamplifier, 20 ft. cable Housing with PT 1000 ATC, 20 ft. coaxial cable Housing, 20 ft. coaxial cable Housing with preamplifier for W100, PT1000, 20 ft cable with tinned leads Housing with preamplifier for W100, 20 ft cable with tinned leads MOUNTING STYLE 1 Submersion mounting In-line mounting (3/4 NPTF tee) Metric in-line mounting (G 1-1/4 male adaptor) In-line mounting (1¼ NPT male adapter) NOTE: When ordering the WEL series electrode for use with a WebMaster, WIND or WPH/WDP4 series controller, make sure to specify WEL housing option 1 or 2. For use with WPHP1 or WPH6 series controller, specify WEL housing option 7 or 8. All of these controllers require housings which contain a preamplifier B15 Jan 2015

84 WEL Series ph/orp Electrodes continued Spare Parts PART # / CODE DESCRIPTION PRICE WEL-PHF-NN Electrode, ph, flat surface WEL-PHB-NN Electrode, ph, bulb surface WEL-PHH-NN Electrode, ph, flat, HF resistant WEL-MVF-NN Electrode, ORP, flat surface Housing with preamplifier and PT 1000 ATC, 20 ft. cable Preamp Housing, ph/orp, 5 Ft Cable, ATC Housing with preamplifier, 20 ft. cable Housing with PT 1000 ATC, 20 ft. coaxial cable Housing, 20 ft. coaxial cable Tee, 3/4 threaded, in-line electrode mounting Adapter, WEL electrode, USA, for standard 1¼ tee In-line mounting nut O-Ring, FKM, for low pressure sensor mounting Metric in-line mounting adapter Preamp, W1/6, ph/orp,20 Ft, No ATC Preamp, W1/6, ph/orp,20 Ft, ATC Accessories Filter, Mains Power, 20 Amp Junction box Cable, 3 twisted pair, shielded, 24 AWG (use with housings with preamp and ATC) 2.10/ft Tee, 1 1/4 NPTF, PVC Kit, US in-line mounting, 1 1/4 adapter Kit, Tee ¾", Nut & o-ring, Little Dipper Kit, metric in-line mounting Connector, BNC male solderable (use with W-250/260 controllers if using preamp) Buffer, ph 4.00, pint Buffer, ph 7, pint Buffer, ph 10, pint Quinhydrone, 20 grams ORP calibration kit Cartridges for Specific Applications WEL-PHLI-NN Electrode, ph, flat surface, for water with less than 100µS/cm conductivity WEL-MVR-NN Electrode, ORP, rod-style platinum, for water with free halogen levels less than 0.25 mg/l B15 Jan 2015

85 WDS Series ph/orp Electrodes WDS - SENSOR PREAMP PART # / CODE DESCRIPTION PRICE WDS Electrode Base Price $ TYPE OF SENSOR ph ph electrode n/c MV ORP electrode n/c TYPE OF PREAMPLIFIER W Walchem Differential Preamp (3 twisted pair + shield) n/c C Conventional Differential Preamp (5 conductor + shield) n/c Parts and Accessories Salt Bridge Replacement Kit (3 salt bridges) Cable, 3 twisted pair + shield, 24 AWG 2.10/ft Junction Box Buffer, ph 4, pint Buffer, ph 7, pint Buffer, ph 10, pint Quinhydrone, 20 grams ORP Calibration Kit B15 Jan 2015

86 Specialty ph/orp Electrodes & Accessories ph/orp Electrodes, Cables & Mounting PART # / CODE DESCRIPTION PRICE Electrode, ph, submersion, flat, no cable, CPVC Cable, 10 ft., threaded cap, BNC, CPVC Cable, 20 ft., threaded cap, BNC, CPVC Electrode, ph, insertion, flat, no cable, CPVC Insertion Assembly/Cable, 12, 20 ft. cable, ATC, smooth cap, BNC & bare wires, CPVC Insertion Assembly, CPVC Electrode, ORP, insertion, flat, no cable, CPVC Gland, SS, High Temp/Submersion (ph/orp) Gland, SS, High Temp/In-line (ph/orp) Electrode, ph, high temp/pressure, 10 ft. cable Electrode, ORP, high pressure, 10 ft. cable Accessories PART # / CODE DESCRIPTION PRICE Preamplifier Assembly, ph/orp Preamplifier, ph/orp with BNC (for W-250/260 series) Cable, 3 Twisted Pair, Shielded, 24 AWG 2.10/ft Connector, BNC male, solderable (use with W-250/260 controllers if using preamp) Buffer, ph 4, pint Buffer, ph 7, pint Buffer, ph 10, pint Quinhydrone, 20 grams Calibration kit, ORP B15 Jan 2015

87 SECTION III SPECIALTY/PLATING CONTROLLERS WNI410 Series Electroless Nickel Controllers U WNI41 - W400 DUAL INPUT VOLTAGE OUTPUT OPTION USB PART # / CODE DESCRIPTION PRICE (adder) WNI41 Electroless Nickel Controller $2, DUAL INPUT 0 None n/c 1 ph Input circuit board installed VOLTAGE VAC, prewired n/c 5 Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 2 Two isolated 4-20 ma outputs (WNI411 only) Single isolated 4-20 ma output OPTIONS N None n/c 1 Flow through nickel sensor USB U Integrated datalogging and config file import/export via USB flash stick n/c Spare Parts PART # / CODE DESCRIPTION PRICE Fuses Fuse, 1 Amp, F1 for all W400 series Fuse, 6 Amp, F2 for all W400 Series Fuse, 5 Amp, F2 for 240V W300 Series Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 10 Amp, F2 for 120V W300 Series Fuse, 1/16 Amp, F1 for 240V W300 Series 3.70 W400 Circuit Boards Label/Panel Assembly, WNI410-U 1, Power/Relay Board, WNI Power/Relay Board, WNI ma option board, W400 Series Option Board, ph/orp, W400 Series W300 Circuit Boards Label/Panel Assembly, WNI310 1, Power Supply Board w/fuse, WNI/WCU310, 120V Power Supply Board w/fuse, WNI/WCU310, 240V ma option board, W300 Series ph option board, WNI Sensors and Sensor Parts Cable, WCU/WNI sensor, 20 ft Connector, WCU/WNI Sensor, flow through, nickel B15 Jan 2015

88 PART # / CODE DESCRIPTION PRICE Connector Assembly, WCU/WNI Sensor Module, Ni, Flow through Lamp, All WNI/WCU Sensors O-Ring, 1/2" WCU/WNI Flow through Sensors O-Ring, 3/8" WCU/WNI Flow through Sensors Fitting, 3/8"Tube x 3/8"MNPT, PP Label, 'Calibration Void' Tube, Glass, Nickel Flow through Sensor Other Power Cord, 115V, Male Power Cord, 115V, Female Cable Assembly, Power, W300 Series Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Fitting, 1/2 OD T x 1/2 NPTM Fitting, Elbow, 3/8"T x 3/4"MNPT Strain Relief, PG Cable W400 Ribbon Accessories PRICE Filter, Mains Power, 20 Amp Sample System, 120 VAC, 60 Hz (includes nickel & ph sensors) 4, Sample System, 240 VAC, 50 Hz (includes nickel & ph sensors) 4, Cooling coil (installed off-line) CP1-244A Bellows sample pump, 120 V, 60 Hz CP1-245A Bellows sample pump, 240 V, 50 Hz E Sample tubing, flow through sensor Tubing Union, WCU/WNI series Degasser Needle valve, ½ NPT, PP Extension cable, 20 ft., WNI sensors Extension cable, 40 ft., WNI sensors B15 Jan 2015

89 FOR USE WITH WEL SERIES ph ELECTRODES WEL-PHF-12 ph electrode with preamplifier, ATC, in-line WEL-PHF-22 ph electrode with preamplifier, in-line ph mounting adapter, 1 1/4 tee to 3/8 tubing Housing with preamplifier and ATC, 20 ft. cable Preamp Housing, ph/orp, 5 Ft Cable, ATC Housing with preamplifier, 20 ft. cable Junction box (if more than 20 ft. cable required) Cable, 3 Twisted Pair, Shielded, 24 AWG (junction box to controller) 2.10/ft WEL-PHF-NN Electrode, ph, flat Tee, 3/4 threaded, in-line electrode mounting Adapter, WEL electrode, USA for standard 1¼ tee In-line mounting nut O-Ring, FKM, for low pressure sensor mounting 7.70 FOR USE WITH OBSOLETE ph ELECTRODE ph electrode mounting adapter, 3/ Preamplifier, ph Cable, 3 Twisted Pair, Shielded, 24 AWG 2.10/ft. FOR USE WITH OBSOLETE ph ELECTRODE M Fitting, 1/2 ID x 1/2 NPTM Reducing bushing, 1/2 x 3/4, for use with adapter ph electrode mounting adapter, 3/4 NPTF Preamplifier, ph Cable, 3 Twisted Pair, Shielded, 24 AWG 2.10/ft B15 Jan 2015

90 WCU410 Series Microetch/Electroless Copper Controllers W400 WCU410 - U VOLTAGE OUTPUT OPTION USB PART # / CODE DESCRIPTION PRICE (adder) WCU410 Electroless Copper/Microetch Controller $2, VOLTAGE VAC, prewired n/c 5 Hardwired, cable glands n/c OUTPUT N No 4-20 ma output n/c 4 Isolated 4-20 ma output OPTIONS N No sensor n/c 1 Flow through sensor Immersible sensor 1, USB U Integrated datalogging and config file import/export via USB flash stick n/c Spare Parts PRICE Fuses Fuse, 1 Amp, F1 for all W400 series Fuse, 6 Amp, F2 for all W400 Series Fuse, 5 Amp, F2 for 240V W300 Series Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 10 Amp, F2 for 120V W300 Series Fuse, 1/16 Amp, F1 for 240V W300 Series 3.70 W400 Circuit Boards Label/Panel Assembly, WCU410-U 1, Power/Relay Board, WCU ma Output Board, W400 Series W300 Circuit Boards Label/panel assembly, WCU310 1, Power Supply Board w/fuse, WNI/WCU310, 120V Power Supply Board w/fuse, WNI/WCU310, 240V ma option board, W300 Series Sensors and Sensor Parts Sensor, immersible, copper 1, Sensor, flow through, copper Cable, WCU/WNI sensor, 20 ft Connector, WCU/WNI Connector Assembly, WCU/WNI Glass Tube, Squeezed,.1" (for ) Glass Tube, Squeezed,.025" (for ) B15 Jan 2015

91 PART # / CODE DESCRIPTION PRICE Glass Tube, Squeezed,.015" (for ) Light guide, Fiberoptic, Immersible sensor Lamp, All WNI/WCU Sensors Sensor Module, Cu,Immersible/Flow through Sensor Module, Ni, Flow through O-Ring, 1/2" WCU/WNI Flow through Sensors O-Ring,3/8" WCU/WNI Flow through Sensors Fitting, 3/8"Tube x 3/8"MNPT, PP Label, 'Calibration Void' 0.30 MEC Sensors Sensor, Copper Flow through Sensor, Copper Flow through, MEC Sensor, Copper MEC Special Other Power Cord, 115V, Male Power Cord, 115V, Female Cable Assembly, Power, W300 Series Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Washer, STAR, #6, SS Gland, Cable Insert, 5 hole x 5mm Switch, On-Off, Rocker, H.D Nut, 6-32 Keps Strain Relief, PG Cable W400 Ribbon Accessories PRICE Filter, Mains Power, 20 Amp Cooling coil (installed off-line) E Sample tubing, flow through sensor Tubing Union, WCU/WNI series Extension cable, 20 ft., WCU sensors Extension cable, 40 ft., WCU sensors Degasser, PP, 3/8 O.D. tubing connection Needle Valve, 1/2 NPT, PP B15 Jan 2015

92 SECTION IV WALCHEM ACCESSORY PRODUCTS WFM Series Water Meter Contactors WFM - - SIZE SENSOR CONNECTOR SETTING RATIO PART # / CODE DESCRIPTION PRICE WFM Water Meter Contactor SIZE 07 3/4 NPT Male NPT Male /2 NPT Male NPT Male SENSOR TYPE ADDER 0 None n/c 1 Reed Switch Hall Effect CONNECTOR (TO PUMP) 0 None - leads only n/c 3 Includes E90495 connector for use with EW pump SETTING P Pulses/gallon n/c G Gallons/pulse n/c Ratio ¾ 1 1 ½ P/G G/P P/G G/P P/G G/P P/G G/P 20* 10 2* 1 5* 10 50* 100 2* 1 5* 10 50* 100 * This pulse rate available only in WFM-xx1 (reed switch) only. 2* 1 5* 10 50* 100 2* 1 5* 10 50* B15 Jan 2015

93 WFM Series Water Meter Contactors Spare Parts For dry register type flowmeters with serial numbers after PRICE Lid, ¾" Lid, 1" Lid, 1½" and 2" Lens Gasket Assembly, ¾" Lens Gasket Assembly, 1" Lens Gasket Assembly, 1½" and 2" Internal Assembly, ¾" Internal Assembly, 1" Internal Assembly, 1½" Internal Assembly, 2" Coupling Assembly (2 sets) ¾" Coupling Assembly (2 sets) 1" Coupling Assembly (2 sets) 1½" Coupling Assembly (2 sets) 2" Coupling Gasket (2pcs) ¾" Coupling Gasket (2pcs) 1" Coupling Gasket (2pcs) 1½" Coupling Gasket (2pcs) 2" Lens ¾" to 2" Sensor screw ¾" to 2" Single Reed Switch Sensor (WFMxx1), ¾" to 2" Dual Reed Switch Sensor (WFMxx1), ¾" to 2" Single Hall Effect Sensor (WFMxx2), ¾" to 2" Register, ¾" Register, 1" Register, 1½" Register, 2" Internal Strainer, ¾" Internal Strainer, 1" Internal Strainer, 1½" and 2" Tubular Strainer, ¾" Tubular Strainer, 1" Tubular Strainer, 1½" Tubular Strainer, 2" WFP Series Paddlewheel Flowmeters PRICE WFP050 Paddlewheel w/ ½" mounting tee WFP075 Paddlewheel w/ ¾" mounting tee WFP100 Paddlewheel w/ 1" mounting tee WFP150 Paddlewheel w/ 1.5" mounting tee WFP200 Paddlewheel w/ 2" mounting tee WFP300 Paddlewheel w/ 3" mounting saddle WFP400 Paddlewheel w/ 4" mounting saddle WFP600 Paddlewheel w/ 6" mounting saddle Paddlewheel sensor, ½" to 3", no mounting fitting Paddlewheel sensor, 4" to 6", no mounting fitting B15 Jan 2015

94 Cooling Tower Accessories Solenoid Valves PRICE Solenoid valve, cooling tower, 1", 120V Solenoid valve, cooling tower, ¾", 120V Solenoid valve, cooling tower, ½", 120V Fluorometer Calibration Standard, PTSA, 1L Little Dipper 2, PTSA, 1" Tee 1, Little Dipper 2, Fluorescein, 1" Tee 1, Handheld Little Dipper 2, PTSA 1, Handheld, Little Dipper 2, Fluorescein 1, Calibration Tee, Little Dipper Little Dipper 2, PTSA, ¾" Tee 1, Little Dipper 2, Fluorescein, ¾" Tee 1, Corrater Electrodes Corrater electrode tips, carbon steel (pair) Corrater electrode tips, copper (pair) Corrater electrode tips, brass (pair) Spare Parts Little Dipper 2, PTSA, No Tee 1, Little Dipper 2, Fluorescein, No Tee 1, Corrater 3, Corrater probe C Spare sensor, Little Dipper (original), PTSA with connector 2, Spare part, Signal Isolator C Spare part, Signal Isolator with connector Kit, Corrater Retrofit (Electrode tips sold separately. WebMasters with S/N s after 0801xxxxxx) 3, Boiler Accessories Solenoid Valves Solenoid valve, boiler, ½", psi, 120V Solenoid valve, boiler, ¾", psi, 120V Solenoid valve, boiler, ½", psi, 120V Solenoid valve, boiler, ¾", psi, 120V Motorized Ball Valves Motorized ball valve, boiler, ½", psi, 120V 1, Motorized ball valve, boiler, ¾", psi, 120V 1, Motorized ball valve, boiler, 1", psi, 120V 1, *Valve, Ball, 1/2, NPT *Valve, Ball, 3/4, NPT *Valve, Ball, 1, NPT *Actuator, Motorized Ball Valve, 120V *Actuator, Motorized Ball Valve, 240V *Kit, Mounting, Motorized Ball Valve, 1/ *Kit, Mounting, Motorized ball Valve, 3/ B15 Jan 2015

95 PART # / CODE DESCRIPTION PRICE *Kit, Mounting, Motorized Ball Valve, *Kit, Repair, Motorized Ball Valve, 1/ *Kit, Repair, Motorized Ball Valve, 3/ *Kit, Repair, Motorized Ball Valve, *Replacement parts for motorized ball valves listed above Flow Control Valves Flow control valve, boiler, ¾", psi Flow control valve, boiler, ¾", psi Flow control valve, boiler, ½", psi Flow control valve, boiler, ½", psi Orifice Unions Orifice Union, ½", with 4 Orifice plates, psi Orifice Union, ¾", with 4 Orifice plates, psi Orifice Union, 1", with 4 Orifice plates, psi Fluorometer Sensor, Little Dipper 2, Fluorescein, 1" Tee 1, Sensor, Little Dipper 2, Fluorescein, ¾" Tee 1, Calibration Standard, Fluorescein, 1L Calibration tee, Little Dipper Handheld, Fluorescein 1, Spare Parts C Spare sensor, Little Dipper (original), Fluorescein with connector 2, Sensor, Little Dipper 2, Fluorescein, No Tee 1, Spare part, Signal Isolator C Spare part, Signal Isolator with connector Level Switches Level switch, 3 ft. Maximum depth Level switch, 5 ft. Maximum depth B15 Jan 2015

96 SECTION V PARTS & ACCESSORIES BY PART NUMBER Item Description Price Electrode, ph, submersion, flat, no cable, CPVC Cable, 10 ft., threaded cap, BNC, CPVC Cable, 20 ft., Threaded Cap, BNC, CPVC Electrode, ph, insertion, flat, no cable, CPVC Insertion Assembly/Cable, 12, 20 ft. cable, ATC, smooth cap, BNC & bare wires, CPVC Insertion Assembly, CPVC Electrode, ORP, insertion, flat, no cable, CPVC Buffer, ph 4, pint Buffer, ph 7, pint Buffer, ph 10, pint Quinhydrone, 20 grams Calibration kit, ORP Paddlewheel sensor, ½" to 3", no mounting fitting Paddlewheel sensor, 4" to 6", no mounting fitting Single Reed Switch Sensor (WFMxx1), ¾" to 2" Dual Reed Switch Sensor (WFMxx1), ¾" to 2" Single Hall Effect Sensor (WFMxx2), ¾" to 2" Register, ¾" Register, 1" Register, 1½" Register, 2" Lid, ¾" Lid, 1" Lid, 1½" and 2" Lens Gasket Assembly, ¾" Lens Gasket Assembly, 1" Lens Gasket Assembly, 1½" and 2" Internal Assembly, ¾" Internal Assembly, 1" Internal Assembly, 1½" Internal Assembly, 2" Coupling Assembly (2 sets) ¾" Coupling Assembly (2 sets) 1" Coupling Assembly (2 sets) 1½" Coupling Assembly (2 sets) 2" Coupling Gasket (2pcs) ¾" Coupling Gasket (2pcs) 1" Coupling Gasket (2pcs) 1½" Coupling Gasket (2pcs) 2" B15 Jan 2015

97 51684 Lens ¾" to 2" Sensor screw ¾" to 2" Internal Strainer, ¾" Internal Strainer, 1" Internal Strainer, 1½" and 2" Tubular Strainer, ¾" Tubular Strainer, 1" Tubular Strainer, 1½" Tubular Strainer, 2" Power Cord, 115V, Male Power Cord, 115V, Female Cable, 4 conductor (Disinfection) 0.78/ft Fitting, 1/2 OD T x 1/2 NPTM M Fitting, 1/2 ID X 1/2 NPTM, For 1/2 Diameter ph/orp Electrodes Screw, 8-32 x 3/4 FH SS Nut, 6-32 Keps Screw, 8-32 x 1-1/8, SS Switch, On-Off, Rocker, H.D Strain Relief, 1/2" NPT Nut, 8-32 Keps SS Box Set, Corrugated, all W400 without mounting panels Solenoid valve, cooling tower, 1", 120V Solenoid valve, cooling tower, ¾", 120V Solenoid valve, cooling tower, ½", 120V Strain Relief, PG Gland, SS, High Temp/Submersion (ph/orp) Gland, SS, High Temp/In-line (ph/orp) Electrode, ph, high pressure Tee, 3/4" PVC, T x T x T, Schedule Connector, BNC male solderable (use with W-250/260 controllers if using preamp) Solenoid valve, boiler, ½", psi, 120V Solenoid valve, boiler, ¾", psi, 120V Orifice Union, ½", with 4 Orifice plates, psi Orifice Union, ¾", with 4 Orifice plates, psi Orifice Union, 1", with 4 Orifice plates, psi Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 5 Amp, F2 for 240V W300 Series Hanger, Pipe, 36-39mm, Clic Adapter, 3/4" MNPT x 1/4" FNPT, PVC Sample Valve, low pressure Panel, Mounting, 17 x Washer, STAR, #6, SS Cable, 2 wire (flow switch) 0.66/ft Elbow, 3/4"NPT, 90 Degree, PVC Set Box, Corrugated, all controllers on 10 x 17 mounting panels Fuse, 10 Amp, F2 for 120V W300 Series B15 Jan 2015

98 Reducing bushing, 1/2 x 3/4, for use with adapter Motorized ball valve, boiler, ½", psi, 120V 1, Motorized ball valve, boiler, ¾", psi, 120V 1, Motorized ball valve, boiler, 1", psi, 120V 1, Light guide, Fiberoptic, Immersible sensor *Valve, Ball, 1/2, NPT *Valve, Ball, 3/4, NPT *Valve, Ball, 1, NPT *Actuator, Motorized Ball Valve, 120V *Actuator, Motorized Ball Valve, 240V *Kit, Mounting, Motorized Ball Valve, 1/ *Kit, Mounting, Motorized ball Valve, 3/ *Kit, Mounting, Motorized Ball Valve, *Kit, Repair, Motorized Ball Valve, 1/ *Kit, Repair, Motorized Ball Valve, 3/ *Kit, Repair, Motorized Ball Valve, Tube, Glass, Nickel Flow through Sensor Lamp, All WNI/WCU Sensors Tubing Union, WCU/WNI series O-Ring, 1/2" WCU/WNI Flow through Sensors O-Ring, 3/8" WCU/WNI Flow through Sensors Fitting, 3/8"Tube x 3/8"MNPT, PP Cable, 3 twisted pair shielded (ph, ORP or Conductivity) 2.10/ft Label, 'Calibration Void' Fitting, Elbow, 3/8"T x 3/4"MNPT Needle valve, ½ NPT, PP Solenoid valve, boiler, ½", psi, 120V Solenoid valve, boiler, ¾", psi, 120V Preamplifier Housing, ph/orp, ATC, 20 ft. cable, for WEL Preamp Housing, ph/orp, 100 Ft Cable, ATC Preamp Housing, ph/orp, 200 Ft Cable, ATC Preamp Housing, ph/orp, 5 ft. Cable, ATC Preamp Housing, ph/orp, 50 Ft Cable, ATC Preamp Housing, ph/orp, 75 Ft Cable, ATC Housing with PT 1000 ATC, 20 ft. coaxial cable Adapter, WEL electrode, USA, for standard 1-1/4 tee Nut, for low pressure sensor mounting Cable, 1 Pair, Shielded, 22 AWG (watermeter) 1.00/ft O-Ring, FKM, for low pressure sensor mounting Tee, 1 1/4 PVC Preamplifier Housing, ph/orp, No ATC, 20 ft. cable, for WEL Preamp Housing, ph/orp,100 Ft Cable, No ATC Preamp Housing, ph/orp,200 Ft Cable, No ATC Preamplifier Housing, ph/orp, No ATC, 5 ft. cable, for WEL Preamp Housing, ph/orp,50 Ft Cable, No ATC Preamp Housing, ph/orp, 75 Ft Cable, No ATC B15 Jan 2015

99 Housing, 20 ft. coaxial cable Panel, Mounting, 24 x Metric in-line mounting adapter Glass Tube, Squeezed,.1" (for ) Glass Tube, Squeezed,.025" (for ) Glass Tube, Squeezed,.015" (for ) Electrodeless sensor without mounting adapter, PEEK, donut shape 1, Cable, 3 twisted pair, 2 shields, 22 AWG (to extend electrodeless conductivity sensor cables) $1.40/ft Fuse, F1, WebMaster, 1.6 amp Fuse, F2 and F3, WebMaster, 6.3 amp Float Assembly, Point Level Sensor Elbow, for low pressure contacting conductivity sensors Flow Switch Body (Tee) Housing, Switch Tee, for low pressure sensor mounting Locknut, 3/4 Electrical, Plated Plug, 1" Hole Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 3 hole x 8mm Strain Relief, 3/4" NPT Gland, Cable Insert, 5 hole x 5mm Spacer,.5 x.166 ID x.375 L Hanger, Clic O-Ring, float retaining Tee, 2 NPTF, CPVC Reducing bushing, 2 x 3/4 NPT, CPVC Nipple, 3/4" x 6, PVC Schedule Panel, Mounting, 30" x 19" Pigtail, 120 VAC Hanger, Pipe, mm, Clic Flow switch, high pressure Electrode, ORP, high pressure, 10 ft cable Submersion adapter, 316SS, for sensor Power Cord, WebMaster, 15A Gland, Cable Insert, 6 Hole x 4mm Cable, 3 conductor for Hall Effect water meters and paddlewheel 0.88/ft Sample Valve, high pressure Tee, 3/4"NPT, black iron Sensor, Contacting Conductivity, high pressure tower, 300 psi Fuse, 1 Amp, F1 for all W400 Series Cross, ¾, Black iron, boiler Networking Master Capability upgrade code, WebAlert Adapter, in line, for electrodeless conductivity sensor Adapter, 316SS, inline mounting of PEEK electrodeless conductivity, 2" NPTM Salt Bridge Replacement Kit (3 salt bridges) B15 Jan 2015

100 Electrode, Boiler/Condensate, no ATC, no Junction Box Cable, USB, A to B, 10ft CD, Software Support USB Flash drive Modbus Upgrade code Networking Master Upgrade code Truss, For GPRS Modem Cable WebMaster AC Input Cable WebMaster DC Output Power Switch Switch Boot, WIND Ribbon Cable Cover, WA500 Power Supply SMA To FME Adapter Fuse, 1/16Amp, F1 for 240V W300 Series Washer set, disinfection sensors Clip ring O-Ring, disinfection sensors Nipple, 3/4" Close CPVC Schedule Membrane Cap,2/20 ppm Chlorine Dioxide and 200/2,000 ppm Hydrogen Peroxide and 200/2,000 ppm Peracetic Acid (PVC body) Membrane Cap, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) USB Device Exterior Port Electrolyte, 100 ml, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Electrolyte, 100 ml, 2/20/200 ppm Chlorine Dioxide Cable W400 Ribbon Membrane Cap, 20 ppm Ozone Electrolyte, 100 ml, 2/20 ppm Ozone Electrolyte, 100 ml, 200/2,000 Peracetic Acid (PVC body) and 2000/20,000 Peracetic Acid (PEEK body) Corrater 3, Corrater probe Valve, 1/4" x 1/4" Rotameter Hanger, pipe, 28 mm, CLIC Panel, 19" x 24" Connector Assembly, WCU/WNI Membrane Cap, 20 ppm Free Chlorine/Bromine (Ext ph range) and 20 ppm Total Chlorine Electrolyte, 100 ml, 20 ppm Total Chlorine Electrolyte, 100 ml, 20 ppm Free Chlorine/Bromine (Ext. ph range) Peracetic Acid Sensor, PEEK, 20,000 ppm, no cable 4, Flow cell, acrylic, for PEEK PAA sensors 1, NYE Lubricant 760g, 1cc Ribbon Cable, WebMaster Membrane Cap 2000/20,000 ppm, 200 ppm Chlorine Dioxide, Peracetic Acid (PEEK body) Membrane Cap, 20,000 ppm Peracetic Acid (PVC body) and 20,000 ppm Hydrogen Peroxide B15 Jan 2015

101 Electrolyte, 100 ml, 20,000 ppm Peracetic Acid (PVC body) Electrolyte, 100 ml, 200/2,000/20,000 ppm Hydrogen Peroxide Calibration Standard, PTSA, 1L Calibration Standard, Fluorescein, 1L Peracetic Acid Sensor, PEEK, 2000 ppm, no cable 4, Tee, 1", Little Dipper (Original) SMA Jack 10"Angled Plug Corrater electrode tips, carbon steel (pair) Corrater electrode tips, copper (pair) Corrater electrode tips, brass (pair) Power switch Strain relief, 1 hole insert, Power cord Strain relief, 1 hole insert, Ethernet Strain relief, 1 hole insert, Sensor Power cord Pigtail BNC cap, W Panel, 11.8" x 22.5" Panel, 11.8" x 13" Screw, 10-32, 5/8" long Sensor, Contacting Conductivity, Cell constant 0.01, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 0.1, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 1.0, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 10.0, no gland, 10 ft. cable Gland, PP, 1/2" NPT, 100 psi, for sensors Membrane Cap Hose rings, QTY 10, for all caps except the standard free chlorine Little Dipper 2, PTSA, 1" Tee 1, Little Dipper 2, Fluorescein, 1" Tee 1, Handheld Little Dipper 2, PTSA 1, Handheld, Little Dipper 2, Fluorescein 1, Little Dipper 2, PTSA, No Tee 1, Little Dipper 2, Fluorescein, No Tee 1, Membrane Cap, 2 ppm Ozone ma Option Board, W300 series Cable Assembly, Power, W300 Series Power Supply Board w/fuse, WCT310, 120V Power Supply Board w/fuse, WCT300, 120V Power Supply Board w/fuse, WCT310, 240V Power Supply Board w/fuse, WCT300, 240V Electrode, Boiler/Condensate, w/junction Box NT Electrode, Boiler Condensate, No temp, w/junction Box Sensor, Contacting Conductivity, Boiler Preamplifier, ph/orp, for high pressure electrodes Sensor, flow through, nickel Sensor, flow through, copper Sensor, immersible, copper 1, B15 Jan 2015

102 Cable, WCU/WNI sensor, 20 ft Connector, WCU/WNI Sensor Module, Cu,Immersible/Flow through Sensor Module, Ni, Flow through Extension cable, 20 ft., WNI sensors Extension cable, 40 ft., WNI sensors Cooling coil (installed off-line) Label/Panel Assembly, WPH310, Obsolete Consult Factory Power Supply Board w/fuse, WNI/WCU310, 120V Power Supply Board w/fuse, WNI/WCU310, 240V Power Supply Board, 120 V, on/off, WPH Power Supply Board, 120 V, proportional, WPH320, Obsolete Consult Factory Power Supply Board, 240 V, on/off, WPH Power Supply Board, 240 V, proportional, WPH320, Obsolete Consult Factory ph option board, WNI ph electrode mounting adapter, 3/ Degasser Label/Panel Assembly, WCT Label/Panel Assembly, WCM Label/Panel Assembly, WBL Dual input option board, W300 Series Preamplifier, ph/orp with BNC (for W-250/260 series) Flow control valve, boiler, ¾", psi Flow control valve, boiler, ¾", psi Flow control valve, boiler, ½", psi Flow control valve, boiler, ½", psi Cable Assembly, ph Preamp, 10 Ft Junction Box Label/Panel Assembly, WPH320, Obsolete Consult Factory Label/panel assembly, WCU310 1, Label/Panel Assembly, WNI310 1, ph mounting adapter, 1 1/4 tee to 3/8 tubing Kit, US in-line mounting, 1 1/4 adapter Kit, metric in-line mounting Label/Panel assembly, WEC Sensor, Copper Flow through, MEC Label/Panel Assembly, WDB Label/Panel Assembly, WDC Label/Panel Assembly, WDT Label/Panel Assembly, WDT Label/Panel Assembly, WDP310, Obsolete Consult Factory Label/Panel Assembly, WDP320, Obsolete Consult Factory Power Supply Board, WDB300, 120V Power Supply Board, WDB300, 240V Power Supply Board, WDC300, 120V Power Supply Board, WDC300, 240V B15 Jan 2015

103 Power Supply Board w/fuse, WDT300, 120V Power Supply Board w/fuse, WDT300, 240V Power Supply Board w/fuse, WDT310, 120V Power Supply Board w/fuse, WDT310, 240V Power Supply Board, 120V, WDP Power Supply Board, 240V, WDP Power Supply Board, 120V, WDP340, Obsolete Consult Factory Power Supply Board, 240V, WDP340, Obsolete Consult Factory Power Supply Board, WEC310, 120 V Power Supply Board, WEC310, 240 V Test Lead Kit, WEC Extension cable, 100 ft., WEC310 sensor Extension cable, 25 ft., WEC310 sensor Extension cable, 50 ft., WEC310 sensor Extension cable, 75 ft., WEC310 sensor Electrodeless input board, WEC Submersion adapter, CPVC, for sensor Sample System, 120 VAC, 60 Hz (includes nickel & ph sensors) 4, Sample System, 240 VAC, 50 Hz (includes nickel & ph sensors) 4, In-line adapter with nut, CPVC, for sensor Cable, 10 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 100 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 25 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 50 ft., to extend W300/400 contacting conductivity sensor, used with junction box Label/Panel Assembly, WDP340, Obsolete Consult Factory Sensor, electrodeless conductivity, 20 ft. cable, Passive, CPVC, WEC Sensor, electrodeless conductivity, 5 ft. Cable, Passive, CPVC Level switch, 3 ft. Maximum depth Level Switch, 5 ft. Maximum Depth Power Supply Board, WBL300, 120V Power Supply Board, WBL300, 240V Power Supply Board, WCM V Power Supply Board, WCM300, 240V Sensor, Contacting Conductivity, Active, PP/Graphite, 20 ft. cable Contacting, PP/Graphite, 5 ft. cable, no tee Sensor, contacting conductivity, Active, 100 Ft Electrode, conductivity, cooling tower, graphite, passive, 20 ft cable Electrode assembly, contacting conductivity, graphite, passive,,5 ft cable Electrodeless, 20 ft. cable, no mtg adapter, CPVC Electrodeless, 5 ft. cable, no tee, CPVC Sensor, Copper MEC Special Kit, Inline, Electrodeless, CPVC Float, low pressure flow switch Flow switch, low pressure, complete Flow switch (complete), low pressure, 3 ft. cable B15 Jan 2015

104 Flow switch assembly, 20 ft. cable Switch, low pressure flow switch, 20 ft cable Reed switch, low pressure flow switch, 3 ft. cable Switch Housing Assembly, 4 ft cable Reed switch, low pressure flow switch, 20 ft. cable Two low pressure ph or ORP Low pressure ph or ORP Low pressure conductivity Low pressure contacting conductivity + ph/orp Low pressure contacting conductivity + two ph/orp In-line adapter, 316SS, for PEEK sensor w/nut Power Supply Board, 120V, WDP320, Obsolete Consult Factory Power Supply Board, 240V, WDP320, Obsolete Consult Factory Switch & Float assembly, 20 ft cable Switch & Float assembly, low pressure, 3 ft. cable Switch Housing/Float Assembly 4 ft cable Switch & Float assembly, low pressure, 20 ft. cable Low pressure electrodeless conductivity Low pressure electrodeless conductivity + ph/orp Low pressure electrodeless conductivity + two ph/orp Manifold assembly, retrofit kit Kit, Tee ¾", Nut & o-ring, Little Dipper ma Output Card, WebMaster Digital Input Card Analog Input Card Sensor Input Card Display, WebMaster Kit, ph, Add-on, 5 ft. cable Kit, ph, Add-on, 20 ft. cable Kit, ORP, Add-on, 5 ft. cable Kit, ORP, Add-on, 20 ft. cable Kit, Contacting Conductivity, Add-on, 20 ft. for makeup Kit, Electrodeless Conductivity, Add-on, 20 ft. cable High pressure manifold, contacting conductivity, 4 ft cable Flow switch manifold, contacting conductivity, 300 psi, 4 ft. cable High pressure contacting conductivity + high pressure ph/orp, 4 ft cable Kit, Boiler Conductivity Add-on Preamp, for high pressure contacting conductivity electrodes ( & ) Contacting, 250 psi, no cable (boiler) with preamp and j-box High pressure contacting conductivity + two high pressure ph/orp, 4 ft cable 1, Contacting, 300 psi, no cable (high pressure tower) with preamp and j-box Sensor, Contacting Conductivity, Active, PP/Stainless Steel, 20 ft. cable Contacting, PP/stainless, 5 ft. cable, no tee Electrode, conductivity, cooling tower, SS, passive, 20 ft cable Electrode, conductivity, cooling tower, SS, passive, 5 ft cable Filter, Mains Power, 20 Amp B15 Jan 2015

105 Label/Panel Assembly, WCT Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 5 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 5 ft. cable, no tee, no mtg adapter, CPVC Modem + instructions (landline) Sensor, electrodeless conductivity, 20 ft. cable, Passive, PEEK, WEC Label/Panel Assembly, WBL Power Supply Board, WBL310, 120V Power Supply Board, WBL310, 240V Tee assembly, CPVC electrodeless conductivity, 3/4" NPTF process connections High pressure conductivity, 4 ft cable Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 5 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, 1-10 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Contacting, PP/graphite, 20 ft. cable, in-line or submersion Contacting, PP/stainless, 20 ft. cable, in-line or submersion Electrodeless, 20 ft. cable, in-line w/mtg adapter with tee, CPVC ph, flat, 5 ft. cable, no tee, w/temp comp ORP, rod style, 5 ft. cable, no tee ph, high pressure, 10 ft. cable, in-line, with preamp ORP, high pressure, 10 ft. cable, in-line, with preamp Low pressure contacting conductivity on Polypro panel High pressure contacting conductivity on Polypro panel Low pressure electrodeless conductivity on Polypro panel Low pressure conductivity + ph/orp on Polypro panel High pressure contacting conductivity + high pressure ph/orp on Polypro panel 1, Low pressure electrodeless conductivity + ph/orp on Polypro panel Low pressure contacting conductivity + two ph/orp on Polypro panel High pressure contacting conductivity + two high pressure ph/orp on Polypro panel 1, Low pressure electrodeless conductivity + two ph/orp on Polypro panel Modem Card Relay Card, 7 Powered, 1 dry Relay Card, 8 Powered Relay Card, 4 powered, 4 dry Relay Card, 6 powered, 2 dry Relay Card, 8 dry contact Core Interface Board Core, WM Core, WIND R Flow Cell Body Chlorine Dioxide sensor, 20 ppm, no cable 1, Flow cell assembly, Chlorine/Bromine, Chlorine Dioxide B15 Jan 2015

106 Power Supply, W Free Chlorine/Bromine Sensor, 20 ppm, no cable 1, Cable, disinfection sensors, 20 ft Cable, Disinfection sensors, 5 ft Low pressure ph or ORP on Polypro panel Process Monitor Board, WA Power Supply - I/O Board, WA Core Board, WA M Core Board with Master Capability, WA Ozone Sensor, 20 ppm, no cable 2, USB Device Assembly Port w/ Cap Peracetic Acid Sensor, 2000 ppm, no cable 1, Label/Panel Assembly, WDIS310, Obsolete Consult Factory Power Supply Board, 120V, WDIS Power Supply Board, 240V, WDIS Disinfection (note: WebMaster does not mount on panel with this manifold) Disinfection Flow switch manifold, disinfection, 150 psi (flow switch)/15 psi (sensor), 3 ft. cable Flow switch manifold, disinfection, 150 psi (flow switch)/15 psi (sensor), 20 ft. cable Peracetic Acid, 2000 ppm, 20 ft. cable, no mounting hardware 2, ph, flat, 5 ft. cable, no tee, w/o temp comp ph, bulb, 5 ft. cable, no tee, w/temp comp ph, bulb, 5 ft. cable, no tee, w/o temp comp ph, flat, HF resistant, 5 ft. cable, w/temp comp ph, flat, HF resistant, 5 ft. cable, w/o temp comp ph, bulb, HF resistant, 5 ft. cable, w/temp comp ph, bulb, HF resistant, 5 ft. cable, w/o temp comp ph, low ionic strength, 5 ft. cable ph, low ionic strength, 5 ft. cable, w/o temp comp ORP, flat style, 5 ft. cable, no tee, w/o temp comp Free Chlorine/Bromine, 20 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide, 20 ppm, 20 ft.cable, no mtg hardware 1, Ozone, 20 ppm, 20 ft. cable, no mounting hardware 2, Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Electrodeless, 1-10 ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, High pressure ph or ORP, 4 ft cable Manifold, Two high pressure ph or ORP, 4 ft cable 1, Manifold, High pressure ph or ORP on Polypro panel, 4 ft cable Manifold, Two low pressure ph or ORP on Polypro panel, 4 ft cable Manifold, Two high pressure ph or ORP on Polypro panel, 4 ft cable 1, Kit Flowcell Washer / O-Ring B15 Jan 2015

107 Core Interface Board, WIND mA Option Board, W400 series Conductivity sensor input board, WDT400 series Option Board, ph/orp, W400 Series Power/Relay Board, WCT Power/Relay Board, WCT Power/Relay Board, WDIS Power/Relay Board, WPH Power/Relay Board, WDP Relay Card, 4 Powered, 4 Opto-Isolated Relay Card, 4 dry contact, 4 opto-isolated Power/Relay Board, WDP Power/Relay Board, WDT Power/Relay Board, WDT Power/Relay Board, WDB Power/Relay Board, WDC Power/Relay Board, WBL Power/Relay Board, WCU Power/Relay Board, WNI Power/Relay Board, WNI Power/Relay Board, WBL Power/Relay Board, WCM Free Chlorine/Bromine Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine, 200 ppm, 20 ft. cable, no mounting hardware 1, Label/Panel Assembly, WCT410-U Free Chlorine/Bromine sensor, ext. ph range, 20 ppm, no cable 1, Free Chlorine/Bromine, ext. ph range, 20 ppm, 20 ft.cable, no mtg hardware 1, Label/Panel Assembly, WCT400-U Label/Panel Assembly, WBL400-U Label/Panel Assembly, WBL410-U Label/Panel Assembly, WDB400-U Label/Panel Assembly, WDT410-U Label/Panel Assembly, WCM400-U Label/Panel Assembly, WDC400-U Label/Panel Assembly, WPH/DP410-U Label/Panel Assembly, WPH/DP420-U Label/Panel Assembly, WDP440-U Label/Panel Assembly, WEC/WDEC410-U Label/Panel Assembly, WDIS410-U Label/Panel Assembly, WCU410-U 1, Label/Panel Assembly, WNI410-U 1, Label/Panel Assembly, WDT400-U Label/Panel Assembly, WECT400-U Label/Panel Assembly, WECT410-U Label/Panel Assembly, WEDT410-U Sensor, Econd, Active, CPVC, 0-10,000 us/cm, 20 ft. cable, for WECT/WEDT B15 Jan 2015

108 Sensor, Econd, Active, CPVC, 0-10,000 us/cm, 5 ft. cable for WECT/WEDT Electrodeless conductivity, Tee, Nut, O-Ring Kit, GPRS 2G Modem w/antenna, Cables, Hardware Peracetic Acid Sensor, 200 ppm, no cable 2, Total Chlorine Sensor, 20 ppm, no cable 1, Kit, Free Chlorine/Bromine, ext ph range, 20 ppm, Add-on, 20 ft. cable 2, Kit, Free Chlorine/Bromine, ext ph range, 20 ppm, Add-on w/manifold, 20 ft. cable 2, Kit, Chlorine Dioxide, 20 ppm, Add-on, 20 ft. cable 2, Kit, Chlorine Dioxide, 20 ppm, Add-on w/manifold, 20 ft. cable 2, Total Chlorine, 20 ppm, 20 ft. cable, no mounting hardware 1, Peracetic Acid, 200 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid Sensor, 20,000 ppm, no cable 2, Peracetic Acid, PVC, 20,000 ppm, 20 ft. cable, no mounting hardware 2, Antenna Cable Extension Assembly, 50' Antenna Cable Extension Assembly, 100' Free Chlorine/Bromine Sensor, 2 ppm, no cable 1, Free Chlorine/Bromine, 2 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide Sensor, 2 ppm, no cable 1, Chlorine Dioxide, 2 ppm, 20 ft. cable, no mounting hardware 1, Chlorine Dioxide Sensor, 200 ppm, no cable 1, Chlorine Dioxide, 200 ppm, 20 ft. cable, no mounting hardware 1, Hydrogen Peroxide, 200 ppm, no cable 2, Hydrogen Peroxide, 200 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 2000 ppm, no cable 2, Hydrogen Peroxide, 2000 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 20,000 ppm, no cable 2, Hydrogen Peroxide, 20,000 ppm, 20 ft. cable, no mounting hardware 2, Spare part, Signal Isolator C Spare part, Signal Isolator with connector Kit, GPRS 3G Modem w/antenna, Cables, Hardware Power/Relay Board, WPH Kit, Corrater Retrofit (Electrode tips sold separately. WebMasters with S/N s after 0801xxxxxx) 3, Spare Sensor, Little Dipper (original), Fluorescein 2, C Spare sensor, Little Dipper (original), Fluorescein with connector 2, Spare Sensor, Little Dipper (original), PTSA 2, C Spare sensor, Little Dipper (original), PTSA with connector 2, Flow switch manifold, electrodeless conductivity + ph or ORP, 100 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity + ph or ORP, 100 psi, 20 ft. cable Cable, W600 power switch Power/Relay Board, WECT Power/Relay Board, WECT Power/Relay Board, WEDT Sensor, Copper Flow through Spare, Label/Panel Assembly, WMT/B/D/1 1, Cable, W100 Power switch B15 Jan 2015

109 Ribbon cable BNC connector assembly, W Safety cover, W Manifold, Little Dipper (Original), CCON F/S Flow switch manifold, contacting conductivity + ph or ORP, 100 psi, 3 ft. cable Flow switch manifold, contacting conductivity + ph or ORP, 100 psi, 20 ft. cable Cable, for and sensors, 20ft Sensor, Electrodeless Conductivity, CPVC, 3 ft. cable Sensor, Electrodeless Conductivity, CPVC, 20 ft. cable Sensor, Electrodeless Conductivity, PEEK, 3 ft. cable Sensor, Electrodeless Conductivity, PEEK, 20 ft. cable Sensor, Contacting Conductivity, WCTW1, 300 psi, 10 ft. cable Sensor, Contacting Conductivity, PP/Graphite, 3 ft. cable Sensor, Contacting Conductivity, PP/Graphite, 20 ft. cable Sensor, Contacting Conductivity, PP/SS, 3 ft. cable Sensor, Contacting Conductivity, PP/SS, 20 ft. cable Preamp housing, no ATC, 3 ft. cable Preamp housing, no ATC, 20 ft. cable Preamp housing, Pt1000 ATC, 3 ft. cable Preamp housing, Pt1000 ATC, 20 ft. cable Cable, W100/600 disinfection, 3 ft Cable, W100/600 disinfection, 20 ft FPA, WCTW1, WBLW1, WCNW1 no AO FPA, WCTW1, WBLW1, WCNW1 with AO FPA, WPHPW1, WPHBW1, WPHNW1, WDSW1, no AO FPA, WPHPW1, WPHBW1, WPHNW1, WDSW1, with AO Power relay board, W100, 3 powered, non-passive Power relay board, W110, 3 dry, non-passive Power relay board, W120, 2 opto, 1 dry, non-passive Power relay board, W100, 3 powered, passive ph/orp Power relay board, W110, 3 dry, passive ph/orp Power relay board, W120, 2 opto, 1 dry, passive ph/orp Gland, steel, 1/2" NPT, 200 psi, for sensors Strain relief, 3 hole insert, pigtails Strain relief, 3 hole insert, small Flow switch manifold, contacting conductivity, 150 psi, 3 ft. cable Flow switch manifold, contacting conductivity, 150 psi, 20 ft. cable Flow switch manifold, ph/orp, 100 psi, 3 ft. cable Flow switch manifold, ph/orp, 100 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity, 150 psi, 3 ft. cable Flow switch manifold, electrodeless conductivity, 150 psi, 20 ft. cable Sensor, Contacting Conductivity, 300 psi, 10 ft. cable Boiler sensor with ATC, 250 psi, 3/4"NPT, cell constant Boiler sensor without ATC, 250 psi, 3/4" NPT, cell constant Boiler sensor with ATC, 250 psi, 3/4"NPT, cell constant Spare Part, GPRS 3G Modem (Quad Band) B15 Jan 2015

110 Flow switch manifold, contacting conductivity + Little Dipper 2, 100 psi, 3 ft. cable Flow switch manifold, contacting conductivity + Little Dipper 2, 100 psi, 20 ft. cable Calibration Tee, Little Dipper Kit, Tee 1", Nut & o-ring, Little Dipper Little Dipper 2, PTSA, ¾" Tee 1, Little Dipper 2, Fluorescein, ¾" Tee 1, Flow switch manifold, disinfection + ph ORP or tower contacting conductivity, 100 psi (flow switch)/15 psi (dis. sensor), 3 ft. cable Flow switch manifold, disinfection + ph ORP or tower contacting conductivity 100 psi (flow switch)/15 psi (dis. sensor), 20 ft. cable Spare, front panel, W Spare, sensor board, W Spare, analog input, W Spare, analog output, W Spare, Ethernet board, W Spare, power relay board, 6P/0D, W Spare, power relay board, 2P/4D, W Spare, power relay board, 2O/4D, W Spare, power relay board, 4O/2D, W Safety cover, W Ribbon cable, W Flow switch manifold, electrodeless conductivity + Little Dipper 2, 100 psi, 3 ft. cable Flow switch manifold, electrodeless conductivity + Little Dipper 2, 100 psi, 20 ft. cable Strain relief, 6 hole insert, DI Strain relief, 3 hole insert, AO Strain relief, 3 hole insert, AO Flow switch manifold, dual ph/orp, 100 psi, 3 ft. cable Flow switch manifold, dual ph/orp, 100 psi, 20 ft. cable Ozone Sensor, 2ppm, no cable 2, CP1-244A Bellows sample pump, 120 V, 60 Hz CP1-245A Bellows sample pump, 240 V, 50 Hz E Sample tubing, flow through sensor 1.10 E90495 Connector, 5 pin, EW/EW-Y WCDB-20 Chlorine Dioxide, 20 ft. cable, with flow cell 1, WCDBH-20 Chlorine Dioxide Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, WCDBL-20 Chlorine Dioxide Sensor, 2 ppm, Flow Cell, 20 ft. cable 1, WDS-MVC Electrode, ORP, Differential, Conventional WDS-MVW Electrode, ORP, Differential, Walchem WDS-PHC Electrode, ph, Differential, Conventional WDS-PHW Electrode, ph, Differential, Walchem WEL-MVF Electrode, ORP, flat surface WEL-MVF-21 ORP, flat style, 20 ft. cable, submersion WEL-MVF-NN Electrode, ORP, flat WEL-MVR Electrode, ORP, rod style WEL-MVR-21 ORP, rod style, 20 ft. cable, submersion WEL-MVR-22 ORP, rod style, 20 ft. cable, in-line WEL-MVR-NN Electrode, ORP, Rod B15 Jan 2015

111 WEL-PHB Electrode, ph, bulb surface WEL-PHB-11 ph, bulb, 20 ft. cable, submersion, w/temp comp WEL-PHB-12 ph, bulb, 20 ft. cable, in-line, w/tee, w/ temp comp WEl-PHB-21 ph, bulb, 20 ft. cable, submersion, w/o temp comp WEL-PHB-22 ph, bulb, 20 ft. cable, in-line, w/tee, w/o temp comp WEL-PHB-NN Electrode, ph, bulb surface WEL-PHF Electrode, ph, flat surface WEL-PHF-11 ph, flat, 20 ft. cable, submersion, w/temp comp WEL-PHF-12 ph, flat, 20 ft. cable, in-line, w/tee, w/ temp comp WEL-PHF-21 ph, flat, 20 ft. cable, submersion, w/o temp comp WEL-PHF-22 ph, flat, 20 ft. cable, in-line, w/tee, w/o temp comp WEL-PHF-NN Electrode, ph, Flat WEL-PHH Electrode, ph, flat, HF resistant WEL-PHH-11 ph, flat, HF resistant, 20 ft. cable, submersion, w/temp comp WEL-PHH-12 ph, flat, HF resistant, 20 ft. cable, in-line, w/tee, w/ temp comp WEl-PHH-21 ph, flat, HF resistant 20 ft. cable, submersion, w/o temp comp WEL-PHH-22 ph, flat, HF resistant, 20 ft. cable, in-line, w/tee, w/o temp comp WEL-PHH-NN Electrode, ph, flat, HF resistant WEL-PHLI Electrode, ph, low ionic strength (under 100μS/cm) WEL-PHLI-11 ph, low ionic strength (under 100 µs/cm), 20 ft. cable, submersion, w/temp comp WEL-PHLI-12 ph, low ionic strength (under 100µS/cm), 20 ft. cable, in-line, w/tee, w/temp comp WEl-PHLI-21 ph, Low ionic strength (under 100 µs/cm), 20 ft. cable, submersion, w/o temp comp WEL-PHLI-22 ph, low ionic strength (under 100µS/cm), 20 ft. cable, in-line, w/tee, w/o temp comp WEL-PHLI-NN Electrode, ph, flat surface, for water with less than 100µS/cm conductivity WFCB-20 Free Chlorine/Bromine Sensor, 20 ppm, Flow Cell, 20 ft. cable 1, WFCBH-20 Free Chlorine/Bromine Sensor, 200 ppm, Flow Cell, 20 ft. cable 1, WFCBL-20 Free Chlorine/Bromine Sensor, 2 ppm, Flow Cell, 20 ft. cable 1, WFCXB-20 Free Chlorine/Bromine, ext.ph range, 20 ft. cable, with flow cell 1, WFP050 Paddlewheel w/ ½" Mounting Tee WFP075 Paddlewheel w/ ¾" Mounting Tee WFP100 Paddlewheel w/ 1" Mounting Tee WFP150 Paddlewheel w/ 1.5" Mounting Tee WFP200 Paddlewheel w/ 2" Mounting Tee WFP300 Paddlewheel w/ 3" Mounting Saddle WFP400 Paddlewheel w/ 4" Mounting Saddle WFP600 Paddlewheel w/ 6" Mounting Saddle WHPB-20 Hydrogen Peroxide Sensor, 2000 ppm, Flow Cell, 20 ft. cable 2, WHPBH-20 Hydrogen Peroxide Sensor, 20,000 ppm, Flow Cell, 20 ft. cable 2, WHPBL-20 Hydrogen Peroxide Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, WOZB-20 Ozone Sensor, 20 ppm, Flow Cell, 20 ft. cable 2, WPAB-20 Peracetic Acid Sensor, 2000 ppm, Flow Cell, 20 ft. cable 2, WPABH-20 Peracetic Acid Sensor, 20,000 ppm, Flow Cell, 20 ft. cable 2, WPABL-20 Peracetic Acid Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, WPAPK-20 Peracetic Acid Sensor, PEEK, 20,000 ppm, Acrylic Flow Cell, 20 ft. cable 5, WPAPKL-20 Peracetic Acid Sensor, PEEK, 2000 ppm, Acrylic Flow Cell, 20 ft. cable 6, WTCB-20 Total Chlorine Sensor, 20 ppm, Flow cell, 20 ft. cable 2, B15 Jan 2015

112 SECTION VI PARTS & ACCESSORIES BY DESCRIPTION Item Description $$Price *Actuator, Motorized Ball Valve, 120V *Actuator, Motorized Ball Valve, 240V *Kit, Mounting, Motorized Ball Valve, 1/ *Kit, Mounting, Motorized Ball Valve, *Kit, Mounting, Motorized ball Valve, 3/ *Kit, Repair, Motorized Ball Valve, 1/ *Kit, Repair, Motorized Ball Valve, *Kit, Repair, Motorized Ball Valve, 3/ *Valve, Ball, 1/2, NPT *Valve, Ball, 1, NPT *Valve, Ball, 3/4, NPT Modem + instructions (landline) Insertion Assembly, CPVC ma Option Board, W300 series ma Output Card, WebMaster mA Option Board, W400 series Adapter, 3/4" MNPT x 1/4" FNPT, PVC Adapter, 316SS, inline mounting of PEEK electrodeless conductivity, 2" NPTM Adapter, in line, for electrodeless conductivity sensor Adapter, WEL electrode, USA, for standard 1-1/4 tee Analog Input Card Antenna Cable Extension Assembly, 100' Antenna Cable Extension Assembly, 50' CP1-244A Bellows sample pump, 120 V, 60 Hz CP1-245A Bellows sample pump, 240 V, 50 Hz BNC cap, W BNC connector assembly, W Boiler sensor with ATC, 250 psi, 3/4"NPT, cell constant Boiler sensor with ATC, 250 psi, 3/4"NPT, cell constant Boiler sensor without ATC, 250 psi, 3/4" NPT, cell constant Box Set, Corrugated, all W400 without mounting panels Buffer, ph 10, pint Buffer, ph 4, pint Buffer, ph 7, pint Cable Assembly, ph Preamp, 10 Ft Cable Assembly, Power, W300 Series Cable W400 Ribbon Cable WebMaster AC Input B15 Jan 2015

113 Cable WebMaster DC Output Cable, 1 Pair, Shielded, 22 AWG (watermeter) 1.00/ft Cable, 10 ft., threaded cap, BNC, CPVC Cable, 10 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 100 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 2 wire (flow switch) 0.66/ft Cable, 20 ft., Threaded Cap, BNC, CPVC Cable, 25 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, 3 conductor for Hall Effect water meters and paddlewheel 0.88/ft Cable, 3 twisted pair shielded (ph, ORP or Conductivity) 2.10/ft Cable, 3 twisted pair, 2 shields, 22 AWG (to extend electrodeless conductivity sensor cables) $1.40/ft Cable, 4 conductor (Disinfection) 0.78/ft Cable, 50 ft., to extend W300/400 contacting conductivity sensor, used with junction box Cable, disinfection sensors, 20 ft Cable, Disinfection sensors, 5 ft Cable, for and sensors, 20ft Cable, USB, A to B, 10ft Cable, W100 Power switch Cable, W100/600 disinfection, 20 ft Cable, W100/600 disinfection, 3 ft Cable, W600 power switch Cable, WCU/WNI sensor, 20 ft Calibration kit, ORP Calibration Standard, Fluorescein, 1L Calibration Standard, PTSA, 1L Calibration Tee, Little Dipper CD, Software Support 0.00 WCDBL-20 Chlorine Dioxide Sensor, 2 ppm, Flow Cell, 20 ft. cable 1, Chlorine Dioxide Sensor, 2 ppm, no cable 1, Chlorine Dioxide sensor, 20 ppm, no cable 1, WCDBH-20 Chlorine Dioxide Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, Chlorine Dioxide Sensor, 200 ppm, no cable 1, Chlorine Dioxide, 2 ppm, 20 ft. cable, no mounting hardware 1, WCDB-20 Chlorine Dioxide, 20 ft. cable, with flow cell 1, Chlorine Dioxide, 20 ppm, 20 ft.cable, no mtg hardware 1, Chlorine Dioxide, 200 ppm, 20 ft. cable, no mounting hardware 1, Clip ring Conductivity sensor input board, WDT400 series Connector Assembly, WCU/WNI E90495 Connector, 5 pin, EW/EW-Y Connector, BNC male solderable (use with W-250/260 controllers if using preamp) Connector, WCU/WNI Contacting, 250 psi, no cable (boiler) with preamp and j-box Contacting, 300 psi, no cable (high pressure tower) with preamp and j-box Contacting, PP/graphite, 20 ft. cable, in-line or submersion B15 Jan 2015

114 Contacting, PP/Graphite, 5 ft. cable, no tee Contacting, PP/stainless, 20 ft. cable, in-line or submersion Contacting, PP/stainless, 5 ft. cable, no tee Cooling coil (installed off-line) M Core Board with Master Capability, WA Core Board, WA Core Interface Board Core Interface Board, WIND Core, WIND Core, WM Corrater 3, Corrater electrode tips, brass (pair) Corrater electrode tips, carbon steel (pair) Corrater electrode tips, copper (pair) Corrater probe Coupling Assembly (2 sets) ¾" Coupling Assembly (2 sets) 1" Coupling Assembly (2 sets) 1½" Coupling Assembly (2 sets) 2" Coupling Gasket (2pcs) ¾" Coupling Gasket (2pcs) 1" Coupling Gasket (2pcs) 1½" Coupling Gasket (2pcs) 2" Cover, WA500 Power Supply Cross, ¾, Black iron, boiler Degasser Digital Input Card Disinfection Disinfection (note: WebMaster does not mount on panel with this manifold) Display, WebMaster Dual input option board, W300 Series Dual Reed Switch Sensor (WFMxx1), ¾" to 2" Elbow, 3/4"NPT, 90 Degree, PVC Elbow, for low pressure contacting conductivity sensors Electrode assembly, contacting conductivity, graphite, passive,,5 ft cable NT Electrode, Boiler Condensate, No temp, w/junction Box Electrode, Boiler/Condensate, no ATC, no Junction Box Electrode, Boiler/Condensate, w/junction Box Electrode, conductivity, cooling tower, graphite, passive, 20 ft cable Electrode, conductivity, cooling tower, SS, passive, 20 ft cable Electrode, conductivity, cooling tower, SS, passive, 5 ft cable WEL-MVF-NN Electrode, ORP, flat WDS-MVC Electrode, ORP, Differential, Conventional WDS-MVW Electrode, ORP, Differential, Walchem WEL-MVF Electrode, ORP, flat surface B15 Jan 2015

115 Electrode, ORP, high pressure, 10 ft cable Electrode, ORP, insertion, flat, no cable, CPVC WEL-MVR-NN Electrode, ORP, Rod WEL-MVR Electrode, ORP, rod style WEL-PHB Electrode, ph, bulb surface WEL-PHB-NN Electrode, ph, bulb surface WDS-PHC Electrode, ph, Differential, Conventional WDS-PHW Electrode, ph, Differential, Walchem WEL-PHF-NN Electrode, ph, Flat WEL-PHF Electrode, ph, flat surface WEL-PHLI-NN Electrode, ph, flat surface, for water with less than 100µS/cm conductivity WEL-PHH Electrode, ph, flat, HF resistant WEL-PHH-NN Electrode, ph, flat, HF resistant Electrode, ph, high pressure Electrode, ph, insertion, flat, no cable, CPVC WEL-PHLI Electrode, ph, low ionic strength (under 100μS/cm) Electrode, ph, submersion, flat, no cable, CPVC Electrodeless conductivity, Tee, Nut, O-Ring Electrodeless input board, WEC Electrodeless sensor without mounting adapter, PEEK, donut shape 1, Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, ms/cm, 5 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, 1-10 ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Electrodeless, 1-10 ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, ms/cm, 5 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, in-line w/mtg adapter, PEEK 1, Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, ms/cm, 20 ft. cable, no tee, no mtg adapter, PEEK 1, Electrodeless, ms/cm, 5 ft. cable, no tee, no mtg adapter, CPVC Electrodeless, 20 ft. cable, in-line w/mtg adapter with tee, CPVC Electrodeless, 20 ft. cable, no mtg adapter, CPVC Electrodeless, 5 ft. cable, no tee, CPVC Electrolyte, 100 ml, 2/20/200 ppm Chlorine Dioxide Electrolyte, 100 ml, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Electrolyte, 100 ml, 20 ppm Free Chlorine/Bromine (Ext. ph range) Electrolyte, 100 ml, 2/20 ppm Ozone Electrolyte, 100 ml, 20 ppm Total Chlorine B15 Jan 2015

116 Electrolyte, 100 ml, 20,000 ppm Peracetic Acid (PVC body) Electrolyte, 100 ml, 200/2,000 Peracetic Acid (PVC body) and 2000/20,000 Peracetic Acid (PEEK body) Electrolyte, 100 ml, 200/2,000/20,000 ppm Hydrogen Peroxide Extension cable, 100 ft., WEC310 sensor Extension cable, 20 ft., WNI sensors Extension cable, 25 ft., WEC310 sensor Extension cable, 40 ft., WNI sensors Extension cable, 50 ft., WEC310 sensor Extension cable, 75 ft., WEC310 sensor Filter, Mains Power, 20 Amp Fitting, 1/2 OD T x 1/2 NPTM M Fitting, 1/2 ID X 1/2 NPTM, For 1/2 Diameter ph/orp Electrodes Fitting, 3/8"Tube x 3/8"MNPT, PP Fitting, Elbow, 3/8"T x 3/4"MNPT Float Assembly, Point Level Sensor Float, low pressure flow switch Flow cell assembly, Chlorine/Bromine, Chlorine Dioxide R Flow Cell Body Flow cell, acrylic, for PEEK PAA sensors 1, Flow control valve, boiler, ½", psi Flow control valve, boiler, ½", psi Flow control valve, boiler, ¾", psi Flow control valve, boiler, ¾", psi Flow switch (complete), low pressure, 3 ft. cable Flow switch assembly, 20 ft. cable Flow Switch Body (Tee) Flow switch manifold, contacting conductivity + Little Dipper 2, 100 psi, 20 ft. cable Flow switch manifold, contacting conductivity + Little Dipper 2, 100 psi, 3 ft. cable Flow switch manifold, contacting conductivity + ph or ORP, 100 psi, 20 ft. cable Flow switch manifold, contacting conductivity + ph or ORP, 100 psi, 3 ft. cable Flow switch manifold, contacting conductivity, 150 psi, 20 ft. cable Flow switch manifold, contacting conductivity, 150 psi, 3 ft. cable Flow switch manifold, contacting conductivity, 300 psi, 4 ft. cable Flow switch manifold, disinfection + ph ORP or tower contacting conductivity 100 psi (flow switch)/15 psi (dis. sensor), 20 ft. cable Flow switch manifold, disinfection + ph ORP or tower contacting conductivity, 100 psi (flow switch)/15 psi (dis. sensor), 3 ft. cable Flow switch manifold, disinfection, 150 psi (flow switch)/15 psi (sensor), 20 ft. cable Flow switch manifold, disinfection, 150 psi (flow switch)/15 psi (sensor), 3 ft. cable Flow switch manifold, dual ph/orp, 100 psi, 20 ft. cable Flow switch manifold, dual ph/orp, 100 psi, 3 ft. cable Flow switch manifold, electrodeless conductivity + Little Dipper 2, 100 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity + Little Dipper 2, 100 psi, 3 ft. cable Flow switch manifold, electrodeless conductivity + ph or ORP, 100 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity + ph or ORP, 100 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity, 150 psi, 20 ft. cable Flow switch manifold, electrodeless conductivity, 150 psi, 3 ft. cable B15 Jan 2015

117 Flow switch manifold, ph/orp, 100 psi, 20 ft. cable Flow switch manifold, ph/orp, 100 psi, 3 ft. cable Flow switch, high pressure Flow switch, low pressure, complete FPA, WCTW1, WBLW1, WCNW1 no AO FPA, WCTW1, WBLW1, WCNW1 with AO FPA, WPHPW1, WPHBW1, WPHNW1, WDSW1, no AO FPA, WPHPW1, WPHBW1, WPHNW1, WDSW1, with AO WFCBL-20 Free Chlorine/Bromine Sensor, 2 ppm, Flow Cell, 20 ft. cable 1, Free Chlorine/Bromine Sensor, 2 ppm, no cable 1, WFCB-20 Free Chlorine/Bromine Sensor, 20 ppm, Flow Cell, 20 ft. cable 1, Free Chlorine/Bromine Sensor, 20 ppm, no cable 1, WFCBH-20 Free Chlorine/Bromine Sensor, 200 ppm, Flow Cell, 20 ft. cable 1, Free Chlorine/Bromine Sensor, 200 ppm, no cable 1, Free Chlorine/Bromine sensor, ext. ph range, 20 ppm, no cable 1, Free Chlorine/Bromine, 2 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, 20 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, 200 ppm, 20 ft. cable, no mounting hardware 1, Free Chlorine/Bromine, ext. ph range, 20 ppm, 20 ft.cable, no mtg hardware 1, WFCXB-20 Free Chlorine/Bromine, ext.ph range, 20 ft. cable, with flow cell 1, Fuse, 1 Amp, F1 for all W400 Series Fuse, 1/16Amp, F1 for 240V W300 Series Fuse, 1/8 Amp, F1 for 120V W300 Series Fuse, 10 Amp, F2 for 120V W300 Series Fuse, 5 Amp, F2 for 240V W300 Series Fuse, F1, WebMaster, 1.6 amp Fuse, F2 and F3, WebMaster, 6.3 amp Gland, Cable Insert, 3 hole x 8mm Gland, Cable Insert, 4 hole x 7mm Gland, Cable Insert, 5 hole x 5mm Gland, Cable Insert, 6 Hole x 4mm Gland, PP, 1/2" NPT, 100 psi, for sensors Gland, SS, High Temp/In-line (ph/orp) Gland, SS, High Temp/Submersion (ph/orp) Gland, steel, 1/2" NPT, 200 psi, for sensors Glass Tube, Squeezed,.015" (for ) Glass Tube, Squeezed,.025" (for ) Glass Tube, Squeezed,.1" (for ) Handheld Little Dipper 2, PTSA 1, Handheld, Little Dipper 2, Fluorescein 1, Hanger, Clic Hanger, pipe, 28 mm, CLIC Hanger, Pipe, 36-39mm, Clic Hanger, Pipe, mm, Clic High pressure conductivity, 4 ft cable B15 Jan 2015

118 High pressure contacting conductivity + high pressure ph/orp on Polypro panel 1, High pressure contacting conductivity + high pressure ph/orp, 4 ft cable High pressure contacting conductivity + two high pressure ph/orp on Polypro panel 1, High pressure contacting conductivity + two high pressure ph/orp, 4 ft cable 1, High pressure contacting conductivity on Polypro panel High pressure manifold, contacting conductivity, 4 ft cable High pressure ph or ORP, 4 ft cable Housing with PT 1000 ATC, 20 ft. coaxial cable Housing, 20 ft. coaxial cable Housing, Switch WHPBH-20 Hydrogen Peroxide Sensor, 20,000 ppm, Flow Cell, 20 ft. cable 2, WHPBL-20 Hydrogen Peroxide Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, WHPB-20 Hydrogen Peroxide Sensor, 2000 ppm, Flow Cell, 20 ft. cable 2, Hydrogen Peroxide, 20,000 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 20,000 ppm, no cable 2, Hydrogen Peroxide, 200 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 200 ppm, no cable 2, Hydrogen Peroxide, 2000 ppm, 20 ft. cable, no mounting hardware 2, Hydrogen Peroxide, 2000 ppm, no cable 2, In-line adapter with nut, CPVC, for sensor In-line adapter, 316SS, for PEEK sensor w/nut Insertion Assembly/Cable, 12, 20 ft. cable, ATC, smooth cap, BNC & bare wires, CPVC Internal Assembly, ¾" Internal Assembly, 1" Internal Assembly, 1½" Internal Assembly, 2" Internal Strainer, ¾" Internal Strainer, 1" Internal Strainer, 1½" and 2" Junction Box Kit Flowcell Washer / O-Ring Kit, Boiler Conductivity Add-on Kit, Chlorine Dioxide, 20 ppm, Add-on w/manifold, 20 ft. cable 2, Kit, Chlorine Dioxide, 20 ppm, Add-on, 20 ft. cable 2, Kit, Contacting Conductivity, Add-on, 20 ft. for makeup Kit, Corrater Retrofit (Electrode tips sold separately. WebMasters with S/N s after 0801xxxxxx) 3, Kit, Electrodeless Conductivity, Add-on, 20 ft. cable Kit, Free Chlorine/Bromine, ext ph range, 20 ppm, Add-on w/manifold, 20 ft. cable 2, Kit, Free Chlorine/Bromine, ext ph range, 20 ppm, Add-on, 20 ft. cable 2, Kit, GPRS 2G Modem w/antenna, Cables, Hardware Kit, GPRS 3G Modem w/antenna, Cables, Hardware Kit, Inline, Electrodeless, CPVC Kit, metric in-line mounting Kit, ORP, Add-on, 20 ft. cable Kit, ORP, Add-on, 5 ft. cable B15 Jan 2015

119 Kit, ph, Add-on, 20 ft. cable Kit, ph, Add-on, 5 ft. cable Kit, Tee ¾", Nut & o-ring, Little Dipper Kit, Tee 1", Nut & o-ring, Little Dipper Kit, US in-line mounting, 1 1/4 adapter Label, 'Calibration Void' Label/Panel Assembly, WBL Label/Panel Assembly, WBL Label/Panel Assembly, WBL400-U Label/Panel Assembly, WBL410-U Label/Panel Assembly, WCM Label/Panel Assembly, WCM400-U Label/Panel Assembly, WCT Label/Panel Assembly, WCT Label/Panel Assembly, WCT400-U Label/Panel Assembly, WCT410-U Label/panel assembly, WCU310 1, Label/Panel Assembly, WCU410-U 1, Label/Panel Assembly, WDB Label/Panel Assembly, WDB400-U Label/Panel Assembly, WDC Label/Panel Assembly, WDC400-U Label/Panel Assembly, WDIS310, Obsolete Consult Factory Label/Panel Assembly, WDIS410-U Label/Panel Assembly, WDP310, Obsolete Consult Factory Label/Panel Assembly, WDP320, Obsolete Consult Factory Label/Panel Assembly, WDP340, Obsolete Consult Factory Label/Panel Assembly, WDP440-U Label/Panel Assembly, WDT Label/Panel Assembly, WDT Label/Panel Assembly, WDT400-U Label/Panel Assembly, WDT410-U Label/Panel Assembly, WEC/WDEC410-U Label/Panel assembly, WEC Label/Panel Assembly, WECT400-U Label/Panel Assembly, WECT410-U Label/Panel Assembly, WEDT410-U Label/Panel Assembly, WNI310 1, Label/Panel Assembly, WNI410-U 1, Label/Panel Assembly, WPH/DP410-U Label/Panel Assembly, WPH/DP420-U Label/Panel Assembly, WPH310, Obsolete Consult Factory Label/Panel Assembly, WPH320, Obsolete Consult Factory Lamp, All WNI/WCU Sensors Lens ¾" to 2" B15 Jan 2015

120 51665 Lens Gasket Assembly, ¾" Lens Gasket Assembly, 1" Lens Gasket Assembly, 1½" and 2" Level switch, 3 ft. Maximum depth Level Switch, 5 ft. Maximum Depth Lid, ¾" Lid, 1" Lid, 1½" and 2" Light guide, Fiberoptic, Immersible sensor Little Dipper 2, Fluorescein, ¾" Tee 1, Little Dipper 2, Fluorescein, 1" Tee 1, Little Dipper 2, Fluorescein, No Tee 1, Little Dipper 2, PTSA, ¾" Tee 1, Little Dipper 2, PTSA, 1" Tee 1, Little Dipper 2, PTSA, No Tee 1, Locknut, 3/4 Electrical, Plated Low pressure conductivity Low pressure conductivity + ph/orp on Polypro panel Low pressure contacting conductivity + ph/orp Low pressure contacting conductivity + two ph/orp Low pressure contacting conductivity + two ph/orp on Polypro panel Low pressure contacting conductivity on Polypro panel Low pressure electrodeless conductivity Low pressure electrodeless conductivity + ph/orp Low pressure electrodeless conductivity + ph/orp on Polypro panel Low pressure electrodeless conductivity + two ph/orp Low pressure electrodeless conductivity + two ph/orp on Polypro panel Low pressure electrodeless conductivity on Polypro panel Low pressure ph or ORP Low pressure ph or ORP on Polypro panel Manifold assembly, retrofit kit Manifold, High pressure ph or ORP on Polypro panel, 4 ft cable Manifold, Little Dipper (Original), CCON F/S Manifold, Two high pressure ph or ORP on Polypro panel, 4 ft cable 1, Manifold, Two high pressure ph or ORP, 4 ft cable 1, Manifold, Two low pressure ph or ORP on Polypro panel, 4 ft cable Membrane Cap 2000/20,000 ppm, 200 ppm Chlorine Dioxide, Peracetic Acid (PEEK body) Membrane Cap Hose rings, QTY 10, for all caps except the standard free chlorine Membrane Cap, 2/20/200 ppm Free Chlorine/Bromine (not Ext ph range) Membrane Cap, 20 ppm Free Chlorine/Bromine (Ext ph range) and 20 ppm Total Chlorine Membrane Cap, 2 ppm Ozone Membrane Cap, 20 ppm Ozone Membrane Cap, 20,000 ppm Peracetic Acid (PVC body) and 20,000 ppm Hydrogen Peroxide Membrane Cap,2/20 ppm Chlorine Dioxide and 200/2,000 ppm Hydrogen Peroxide and /2,000 ppm Peracetic Acid (PVC body) Metric in-line mounting adapter B15 Jan 2015

121 Modbus Upgrade code Modem Card Motorized ball valve, boiler, ½", psi, 120V 1, Motorized ball valve, boiler, ¾", psi, 120V 1, Motorized ball valve, boiler, 1", psi, 120V 1, Needle valve, ½ NPT, PP Networking Master Upgrade code Networking Master Capability upgrade code, WebAlert Nipple, 3/4" Close CPVC Schedule Nipple, 3/4" x 6, PVC Schedule Nut, 6-32 Keps Nut, 8-32 Keps SS Nut, for low pressure sensor mounting NYE Lubricant 760g, 1cc Option Board, ph/orp, W400 Series Orifice Union, ½", with 4 Orifice plates, psi Orifice Union, ¾", with 4 Orifice plates, psi Orifice Union, 1", with 4 Orifice plates, psi O-Ring, 1/2" WCU/WNI Flow through Sensors O-Ring, 3/8" WCU/WNI Flow through Sensors O-Ring, disinfection sensors O-Ring, FKM, for low pressure sensor mounting O-Ring, float retaining 2.60 WEL-MVF-21 ORP, flat style, 20 ft. cable, submersion ORP, flat style, 5 ft. cable, no tee, w/o temp comp ORP, high pressure, 10 ft. cable, in-line, with preamp WEL-MVR-22 ORP, rod style, 20 ft. cable, in-line WEL-MVR-21 ORP, rod style, 20 ft. cable, submersion ORP, rod style, 5 ft. cable, no tee WOZB-20 Ozone Sensor, 20 ppm, Flow Cell, 20 ft. cable 2, Ozone Sensor, 2ppm, no cable 2, Ozone Sensor, 20 ppm, no cable 2, Ozone, 20 ppm, 20 ft. cable, no mounting hardware 2, Paddlewheel sensor, ½" to 3", no mounting fitting Paddlewheel sensor, 4" to 6", no mounting fitting WFP050 Paddlewheel w/ ½" Mounting Tee WFP075 Paddlewheel w/ ¾" Mounting Tee WFP100 Paddlewheel w/ 1" Mounting Tee WFP150 Paddlewheel w/ 1.5" Mounting Tee WFP200 Paddlewheel w/ 2" Mounting Tee WFP300 Paddlewheel w/ 3" Mounting Saddle WFP400 Paddlewheel w/ 4" Mounting Saddle WFP600 Paddlewheel w/ 6" Mounting Saddle Panel, 11.8" x 13" Panel, 11.8" x 22.5" B15 Jan 2015

122 Panel, 19" x 24" Panel, Mounting, 17 x Panel, Mounting, 24 x Panel, Mounting, 30" x 19" WPABH-20 Peracetic Acid Sensor, 20,000 ppm, Flow Cell, 20 ft. cable 2, Peracetic Acid Sensor, 20,000 ppm, no cable 2, WPABL-20 Peracetic Acid Sensor, 200 ppm, Flow Cell, 20 ft. cable 2, Peracetic Acid Sensor, 200 ppm, no cable 2, WPAB-20 Peracetic Acid Sensor, 2000 ppm, Flow Cell, 20 ft. cable 2, Peracetic Acid Sensor, 2000 ppm, no cable 1, WPAPK-20 Peracetic Acid Sensor, PEEK, 20,000 ppm, Acrylic Flow Cell, 20 ft. cable 5, Peracetic Acid Sensor, PEEK, 20,000 ppm, no cable 4, WPAPKL-20 Peracetic Acid Sensor, PEEK, 2000 ppm, Acrylic Flow Cell, 20 ft. cable 6, Peracetic Acid Sensor, PEEK, 2000 ppm, no cable 4, Peracetic Acid, 200 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, 2000 ppm, 20 ft. cable, no mounting hardware 2, Peracetic Acid, PVC, 20,000 ppm, 20 ft. cable, no mounting hardware 2, ph electrode mounting adapter, 3/ ph mounting adapter, 1 1/4 tee to 3/8 tubing ph option board, WNI WEL-PHB-12 ph, bulb, 20 ft. cable, in-line, w/tee, w/ temp comp WEL-PHB-22 ph, bulb, 20 ft. cable, in-line, w/tee, w/o temp comp WEl-PHB-21 ph, bulb, 20 ft. cable, submersion, w/o temp comp WEL-PHB-11 ph, bulb, 20 ft. cable, submersion, w/temp comp ph, bulb, 5 ft. cable, no tee, w/o temp comp ph, bulb, 5 ft. cable, no tee, w/temp comp ph, bulb, HF resistant, 5 ft. cable, w/o temp comp ph, bulb, HF resistant, 5 ft. cable, w/temp comp WEL-PHF-12 ph, flat, 20 ft. cable, in-line, w/tee, w/ temp comp WEL-PHF-22 ph, flat, 20 ft. cable, in-line, w/tee, w/o temp comp WEL-PHF-21 ph, flat, 20 ft. cable, submersion, w/o temp comp WEL-PHF-11 ph, flat, 20 ft. cable, submersion, w/temp comp ph, flat, 5 ft. cable, no tee, w/o temp comp ph, flat, 5 ft. cable, no tee, w/temp comp WEl-PHH-21 ph, flat, HF resistant 20 ft. cable, submersion, w/o temp comp WEL-PHH-12 ph, flat, HF resistant, 20 ft. cable, in-line, w/tee, w/ temp comp WEL-PHH-22 ph, flat, HF resistant, 20 ft. cable, in-line, w/tee, w/o temp comp WEL-PHH-11 ph, flat, HF resistant, 20 ft. cable, submersion, w/temp comp ph, flat, HF resistant, 5 ft. cable, w/o temp comp ph, flat, HF resistant, 5 ft. cable, w/temp comp ph, high pressure, 10 ft. cable, in-line, with preamp WEl-PHLI-21 ph, Low ionic strength (under 100 µs/cm), 20 ft. cable, submersion, w/o temp comp WEL-PHLI-11 ph, low ionic strength (under 100 µs/cm), 20 ft. cable, submersion, w/temp comp WEL-PHLI-22 ph, low ionic strength (under 100µS/cm), 20 ft. cable, in-line, w/tee, w/o temp comp WEL-PHLI-12 ph, low ionic strength (under 100µS/cm), 20 ft. cable, in-line, w/tee, w/temp comp B15 Jan 2015

123 ph, low ionic strength, 5 ft. cable ph, low ionic strength, 5 ft. cable, w/o temp comp Pigtail Pigtail, 120 VAC Plug, 1" Hole Power cord Power Cord, 115V, Female Power Cord, 115V, Male Power Cord, WebMaster, 15A Power relay board, W100, 3 powered, non-passive Power relay board, W100, 3 powered, passive ph/orp Power relay board, W110, 3 dry, non-passive Power relay board, W110, 3 dry, passive ph/orp Power relay board, W120, 2 opto, 1 dry, non-passive Power relay board, W120, 2 opto, 1 dry, passive ph/orp Power Supply - I/O Board, WA Power Supply Board w/fuse, WCT300, 120V Power Supply Board w/fuse, WCT300, 240V Power Supply Board w/fuse, WCT310, 120V Power Supply Board w/fuse, WCT310, 240V Power Supply Board w/fuse, WDT300, 120V Power Supply Board w/fuse, WDT300, 240V Power Supply Board w/fuse, WDT310, 120V Power Supply Board w/fuse, WDT310, 240V Power Supply Board w/fuse, WNI/WCU310, 120V Power Supply Board w/fuse, WNI/WCU310, 240V Power Supply Board, 120 V, on/off, WPH Power Supply Board, 120 V, proportional, WPH320, Obsolete Consult Factory Power Supply Board, 120V, WDIS Power Supply Board, 120V, WDP Power Supply Board, 120V, WDP320, Obsolete Consult Factory Power Supply Board, 120V, WDP340, Obsolete Consult Factory Power Supply Board, 240 V, on/off, WPH Power Supply Board, 240 V, proportional, WPH320, Obsolete Consult Factory Power Supply Board, 240V, WDIS Power Supply Board, 240V, WDP Power Supply Board, 240V, WDP320, Obsolete Consult Factory Power Supply Board, 240V, WDP340, Obsolete Consult Factory Power Supply Board, WBL300, 120V Power Supply Board, WBL300, 240V Power Supply Board, WBL310, 120V Power Supply Board, WBL310, 240V Power Supply Board, WCM V Power Supply Board, WCM300, 240V Power Supply Board, WDB300, 120V B15 Jan 2015

124 Power Supply Board, WDB300, 240V Power Supply Board, WDC300, 120V Power Supply Board, WDC300, 240V Power Supply Board, WEC310, 120 V Power Supply Board, WEC310, 240 V Power Supply, W Power Switch Power switch Power/Relay Board, WBL Power/Relay Board, WBL Power/Relay Board, WCM Power/Relay Board, WCT Power/Relay Board, WCT Power/Relay Board, WCU Power/Relay Board, WDB Power/Relay Board, WDC Power/Relay Board, WDIS Power/Relay Board, WDP Power/Relay Board, WDP Power/Relay Board, WDT Power/Relay Board, WDT Power/Relay Board, WECT Power/Relay Board, WECT Power/Relay Board, WEDT Power/Relay Board, WNI Power/Relay Board, WNI Power/Relay Board, WPH Power/Relay Board, WPH Preamp housing, no ATC, 20 ft. cable Preamp housing, no ATC, 3 ft. cable Preamp Housing, ph/orp, 100 Ft Cable, ATC Preamp Housing, ph/orp, 200 Ft Cable, ATC Preamp Housing, ph/orp, 5 ft. Cable, ATC Preamp Housing, ph/orp, 50 Ft Cable, ATC Preamp Housing, ph/orp, 75 Ft Cable, ATC Preamp Housing, ph/orp, 75 Ft Cable, No ATC Preamp Housing, ph/orp,100 Ft Cable, No ATC Preamp Housing, ph/orp,200 Ft Cable, No ATC Preamp Housing, ph/orp,50 Ft Cable, No ATC Preamp housing, Pt1000 ATC, 20 ft. cable Preamp housing, Pt1000 ATC, 3 ft. cable Preamp, for high pressure contacting conductivity electrodes ( & ) Preamplifier Housing, ph/orp, ATC, 20 ft. cable, for WEL Preamplifier Housing, ph/orp, No ATC, 20 ft. cable, for WEL Preamplifier Housing, ph/orp, No ATC, 5 ft. cable, for WEL B15 Jan 2015

125 Preamplifier, ph/orp with BNC (for W-250/260 series) Preamplifier, ph/orp, for high pressure electrodes Process Monitor Board, WA Quinhydrone, 20 grams Reducing bushing, 1/2 x 3/4, for use with adapter Reducing bushing, 2 x 3/4 NPT, CPVC Reed switch, low pressure flow switch, 20 ft. cable Reed switch, low pressure flow switch, 3 ft. cable Register, ¾" Register, 1" Register, 1½" Register, 2" Relay Card, 4 dry contact, 4 opto-isolated Relay Card, 4 powered, 4 dry Relay Card, 4 Powered, 4 Opto-Isolated Relay Card, 6 powered, 2 dry Relay Card, 7 Powered, 1 dry Relay Card, 8 dry contact Relay Card, 8 Powered Ribbon Cable Ribbon cable Ribbon cable, W Ribbon Cable, WebMaster Rotameter Safety cover, W Safety cover, W Salt Bridge Replacement Kit (3 salt bridges) Sample System, 120 VAC, 60 Hz (includes nickel & ph sensors) 4, Sample System, 240 VAC, 50 Hz (includes nickel & ph sensors) 4, E Sample tubing, flow through sensor Sample Valve, high pressure Sample Valve, low pressure Screw, 10-32, 5/8" long Screw, 8-32 x 1-1/8, SS Screw, 8-32 x 3/4 FH SS Sensor Input Card Sensor Module, Cu,Immersible/Flow through Sensor Module, Ni, Flow through Sensor screw ¾" to 2" Sensor, Contacting Conductivity, 300 psi, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 0.01, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 0.1, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 1.0, no gland, 10 ft. cable Sensor, Contacting Conductivity, Cell constant 10.0, no gland, 10 ft. cable Sensor, Contacting Conductivity, PP/Graphite, 3 ft. cable B15 Jan 2015

126 Sensor, Contacting Conductivity, PP/SS, 20 ft. cable Sensor, Contacting Conductivity, PP/SS, 3 ft. cable Sensor, contacting conductivity, Active, 100 Ft Sensor, Contacting Conductivity, Active, PP/Graphite, 20 ft. cable Sensor, Contacting Conductivity, Active, PP/Stainless Steel, 20 ft. cable Sensor, Contacting Conductivity, Boiler Sensor, Contacting Conductivity, high pressure tower, 300 psi Sensor, Contacting Conductivity, PP/Graphite, 20 ft. cable Sensor, Contacting Conductivity, WCTW1, 300 psi, 10 ft. cable Sensor, Copper Flow through Sensor, Copper Flow through, MEC Sensor, Copper MEC Special Sensor, Econd, Active, CPVC, 0-10,000 us/cm, 20 ft. cable, for WECT/WEDT Sensor, Econd, Active, CPVC, 0-10,000 us/cm, 5 ft. cable for WECT/WEDT Sensor, Electrodeless Conductivity, CPVC, 20 ft. cable Sensor, Electrodeless Conductivity, CPVC, 3 ft. cable Sensor, Electrodeless Conductivity, PEEK, 20 ft. cable Sensor, Electrodeless Conductivity, PEEK, 3 ft. cable Sensor, electrodeless conductivity, 20 ft. cable, Passive, CPVC, WEC Sensor, electrodeless conductivity, 20 ft. cable, Passive, PEEK, WEC Sensor, electrodeless conductivity, 5 ft. Cable, Passive, CPVC Sensor, flow through, copper Sensor, flow through, nickel Sensor, immersible, copper 1, Set Box, Corrugated, all controllers on 10 x 17 mounting panels Single Hall Effect Sensor (WFMxx2), ¾" to 2" Single Reed Switch Sensor (WFMxx1), ¾" to 2" SMA Jack 10"Angled Plug SMA To FME Adapter Solenoid valve, boiler, ½", psi, 120V Solenoid valve, boiler, ½", psi, 120V Solenoid valve, boiler, ¾", psi, 120V Solenoid valve, boiler, ¾", psi, 120V Solenoid valve, cooling tower, ½", 120V Solenoid valve, cooling tower, ¾", 120V Solenoid valve, cooling tower, 1", 120V Spacer,.5 x.166 ID x.375 L Spare Part, GPRS 3G Modem (Quad Band) Spare part, Signal Isolator C Spare part, Signal Isolator with connector Spare Sensor, Little Dipper (original), Fluorescein 2, C Spare sensor, Little Dipper (original), Fluorescein with connector 2, Spare Sensor, Little Dipper (original), PTSA 2, C Spare sensor, Little Dipper (original), PTSA with connector 2, Spare, analog input, W Spare, analog output, W B15 Jan 2015

127 Spare, Ethernet board, W Spare, front panel, W Spare, Label/Panel Assembly, WMT/B/D/1 1, Spare, power relay board, 2O/4D, W Spare, power relay board, 2P/4D, W Spare, power relay board, 4O/2D, W Spare, power relay board, 6P/0D, W Spare, sensor board, W Strain relief, 1 hole insert, Ethernet Strain relief, 1 hole insert, Power cord Strain relief, 1 hole insert, Sensor Strain Relief, 1/2" NPT Strain relief, 3 hole insert, AO Strain relief, 3 hole insert, AO Strain relief, 3 hole insert, pigtails Strain relief, 3 hole insert, small Strain Relief, 3/4" NPT Strain relief, 6 hole insert, DI Strain Relief, PG Submersion adapter, 316SS, for sensor Submersion adapter, CPVC, for sensor Switch & Float assembly, 20 ft cable Switch & Float assembly, low pressure, 20 ft. cable Switch & Float assembly, low pressure, 3 ft. cable Switch Boot, WIND Switch Housing Assembly, 4 ft cable Switch Housing/Float Assembly 4 ft cable Switch, low pressure flow switch, 20 ft cable Switch, On-Off, Rocker, H.D Tee assembly, CPVC electrodeless conductivity, 3/4" NPTF process connections Tee, 1 1/4 PVC Tee, 1", Little Dipper (Original) Tee, 2 NPTF, CPVC Tee, 3/4" PVC, T x T x T, Schedule Tee, 3/4"NPT, black iron Tee, for low pressure sensor mounting Test Lead Kit, WEC 1.30 WTCB-20 Total Chlorine Sensor, 20 ppm, Flow cell, 20 ft. cable 2, Total Chlorine Sensor, 20 ppm, no cable 1, Total Chlorine, 20 ppm, 20 ft. cable, no mounting hardware 1, Truss, For GPRS Modem Tube, Glass, Nickel Flow through Sensor Tubing Union, WCU/WNI series Tubular Strainer, ¾" Tubular Strainer, 1" B15 Jan 2015

128 51691 Tubular Strainer, 1½" Tubular Strainer, 2" Two low pressure ph or ORP USB Device Assembly Port w/ Cap USB Device Exterior Port USB Flash drive Valve, 1/4" x 1/4" Washer set, disinfection sensors Washer, STAR, #6, SS B15 Jan 2015

129 Five Boynton Road Hopping Brook Park Holliston, MA USA Telephone: Fax: P/N B15 Jan 2015