SIGNET 2760 DryLoc ph/orp Preamplifier

Size: px
Start display at page:

Download "SIGNET 2760 DryLoc ph/orp Preamplifier"

Transcription

1 SIGNET 2760 DryLoc ph/orp Preamplifier (A-3/04) English SAFETY INSTRUCTIONS 1. Depressurize and vent system prior to installation or removal. 2. Confirm chemical compatibility before use. 3. Do not exceed maximum temperature/pressure specifications. 4. Wear safety goggles or faceshield during installation/service. 5. Do not alter product construction. 6. When using chemicals or solvents care should be taken and appropriate eye, face, hand, body, and/or respiratory protection should be used. Description The +GF+ SIGNET 2760 ph/orp Preamplifiers with DryLoc connectors are part of George Fischer Signet's growing arsenal of sensors for industrial fluid measurement and control. The and -2 Preampliers connects to three different families of ph and ORP electrodes to provide a stable and relaible signal input to traditional +GF+ SIGNET instruments. The and -4 models use the same package to link the same electrodes to third-party equipment that read a traditional millivolt signal for ph measurement without temperature compensation or amplification. Technical Data General Compatible Electrodes: +GF+ SIGNET DryLoc ph and ORP Electrodes Response Time (includes response time of electrodes): ph: <6 s for 95% of change ORP: application dependent Temperature, t: w/2764, 2774 series: 20 s w/2754 : 140 s w/ s Electrical (2760-1, -2 Preamplifiers) Accuracy: ±2 25 C (77 F) Input Impedance, Z: >10 11 Ω Supply Voltage: 6 to 10 VDC Dimensions mm (1.25 in.) 70.1 mm (2.76 in.) 89.4 mm (3.52 in.) Environmental Enclosure Rating: NEMA 6P/IP68 with electrode and watertight conduit and/or extension pipe connected Wetted Materials: CPVC Cable: Maximum cable: Shipping Weight: 4.6m/15 ft., 3-cond shielded, 22AWG 122 m (400 ft.) 0.64 kg (1.41 lb) 56.6mm (2.23 in.) Operating Temperature: Storage Temperature: Relative Humidity: 0 C to 85 C (32 F to 185 F) -20 C to 85 C (-4 F to 185 F) 0 to 95%, non-condensing (without electrode connected) Standards and Approvals CE Manufactured under ISO 9001:2000 for Quality and ISO 14001:1996 for Environmental Management Bottom View showing DryLoc connectors

2 In-line Assembly and Installation Select a location in the pipe that can accomodate the height of the 2760 and electrode assembly. When fully assembled the 2760 and electrode assembly measures approximately 18 cm (7 in.) from the process threads to the top of the preamplifier. 1. For Differential electrodes ( ): Install a standard 1 in. NPT pipe tee into the process line. For Combination electrodes ( ): Install a standard 3/ 4 in. NPT pipe tee into the process line. Note: Combination DryLoc electrodes cannot be installed in-line with the Remove the retaining nut from the base of the 2760 and slide it over the electrode from the bottom. 3. Thread the electrode into the pipe tee. Use appropriate sealant (example: Teflon tape) to create a water-tight connection. 4. Connect the 2760 DryLoc connector onto the top of the electrode and hand-tighten the retaining nut onto the threads to secure the assembly. 3/4 in. Conduit (customer supplied) 2760 Preamplifier ph or ORP Electrode 5. Use 3/4 in. rigid or flexible conduit to protect the cable from damage. 6. If the cable will be extended beyond the standard 15 ft. supplied with the 2760, use a junction box to terminate the wires. Note: Do not extend the 2760 cable more than 120 m (400 ft.). Fitting 2764 Differential DryLoc electrodes require a 1 in. NPT process connection Combination DryLoc Electrodes require a 3/4 in. NPT process connection. Installation Dimensions 107 mm (4.2 in.) Differential Electrodes Combination Electrodes Combination Electrodes 35.6mm (1.4 in.) 38.6mm (1.52 in.) 35.5mm (1.4 in.) 38.6mm (1.52 in.) 27 mm/ 1.0 in. 27 mm/ 1.0 in. 178 mm (7 in.) 32.5mm (1.28 in.) 29.2mm (1.15 in.) 30.5 mm/ 1.2 in. 97 mm/ 3.8 in mm/ 1.2 in. 104 mm/ 4.1 in mm (5.27 in.) 1 in. NPT 128.3mm (5.05 in.) 3/4 in. NPT 65 mm/ 2.6 in. 86 mm/ 3.4 in. 65 mm/ 2.6 in. 86 mm/ 3.4 in. 28.7mm (1.13 in.) 22.8mm (0.9 in.) 25.4mm (1.0 in.) 22.1mm (0.87 in.) 23 mm/ 0.9 in. 23 mm/ 0.9 in. SIGNET 2 of DryLoc ph/orp Preamplifier

3 2760 Submersible Sensor Assembly and Installation Any combination of 2760 and electrode can be installed in a tank or vessel if conditions are within pressure and temperature specifications. The 2760 is able to withstand fluid temperatures up to 85 C, but the maximum tolerance of the electrodes varies. Check the specifications of each component before installation. 1. Insert any DryLoc electrode into base of the 2760 and turn until keyed contacts are seated. 2. Thread retaining cap over electrode and hand-tighten onto A light coat of a non-petroleum based lubricant on the O-ring will ease the installation. Keep the DryLoc electrical interconnection between electrode and preamplifier dry and clean at all times. 3. Attach 3 /4 in. watertight pipe to the top of the Secure the threaded connection to prevent any leakage. For additional defense against possible accumulation of condensation at the back seal area of the 2760, fill the lower 3-4 inches ( mm) of conduit or extension pipe with a flexible sealant such as silicone mm/ 8.2 in. Fill with mm (3 to 4 in.) of sealant 55 mm/ 2.16 in. Use standard installation hardware to connect the submersible 2760 directly to external equipment. OR The NPT Mount Junction box connects to 3 /4 in. pipe or conduit and provides convenient wiring termination. OR The Universal Mount junction box mounts flat onto a wall or can be strapped to a post or pipe. 106 mm/ 4.2 in. 94 mm/ 3.7 in. 94 mm/ 3.7 in. 107 mm/ 4.2 in. 1/2 in. NPT threads Fill with 3 to 4 in. of sealant Fill with 3 to 4 in. of sealant Fill with 3 to 4 in. of sealant 2760 DryLoc ph/orp Preamplifier SIGNET 3 of 8

4 Wiring to +GF+ SIGNET Instruments Any of these electrodes can be connected to the +GF+ SIGNET ProPoint and ProcessPro ph instruments using the /-2 Preamplifier. Wiring diagrams illustrate the actual terminals on these products for convenience. Differential 1 in. Process conn Standard 3/4 in. Process conn Standard Flat DryLoc HF Standard Bulb DryLoc DI ph/orp Monitor mv Input Brown wire Iso. Gnd Blue wire T + Green wire T - White wire V + Red Wire V - Black wire Brown mv Blue Iso. Gnd Green T+ White T- Red V+ Black V ma ProcessPro ph/orp Transmitter Connect this terminal White (Temp) Green (Temp) Blue (Iso. Gnd) Brown (mv input) Shield Black (V-) Red (V+) to Earth GND to reduce electrical interference SIGNET 4 of DryLoc ph/orp Preamplifier

5 Wiring from 2760 DryLoc Preamplifier to Other Manufacturer's Equipment The /-2 Preamplifier can be connected to other manufacturer's instruments that can process the standard amplified mv signal for ph and also are compatible with one of the temperature compensation devices available (3KΩ, PT1000, or 300Ω). Refer to the manufacturer's manual for wiring details. Other products may use different terms to identify the function of each conductor. Differential ph Electrodes (3KΩ RTD) (3KΩ RTD) (PT1000 RTD) (PT1000 RTD) (300Ω RTD) (300Ω RTD) Differential ORP (Redox) Electrodes (10KΩ ID) (10KΩ ID) (PT1000 RTD) (PT1000 RTD) (300Ω RTD) (300Ω RTD) Combination ph Electrodes (3KΩ RTD) (3KΩ RTD) (PT1000 RTD) (PT1000 RTD) (PT1000 RTD) HF (PT1000 RTD) (PT1000 RTD) DI (PT1000 RTD) WT (PT1000 RTD) DryLoc Preamplifier Combination ORP (Redox) Electrodes (10KΩ ID) (10KΩ ID) (no Temp Comp) (no Temp Comp) (10KΩ ID) (10KΩ ID) WT (10KΩ ID) White (Temperature) Green (Temperature) Blue (mv Reference) Shield (Earth Ground) Black (V-) Red (V+) Brown (Active mv, ph/orp) Wiring from 2760 DryLoc Connectors to Other Manufacturer's Equipment The /4 Connectors can be used to interface other manufacturer's instruments to these +GF+ SIGNET DryLoc ph and ORP electrodes. The instrument must be able to process a standard mv signal from the ph or ORP electrode. Several different temperature devices are available. Refer to the manufacturer's manual for wiring details. Other products may use different terms to identify the function of each conductor. DryLoc Connector Combination ph Electrodes (3KΩ RTD) (3KΩ RTD) (PT1000 RTD) (PT1000 RTD) (PT1000 RTD) HF (PT1000 RTD) (PT1000 RTD) DI (PT1000 RTD) WT (PT1000 RTD) White RTD (Temperature) Green RTD (Temperature) Blue Solution Ground Shield Earth Ground Black Electrode Reference Red (Active mv, ph/orp) Brown (no connection) Combination ORP (Redox) Electrodes (10KΩ ID) (10KΩ ID) (no Temp Comp) (no Temp Comp) (10KΩ ID) (10KΩ ID) WT (10KΩ ID) To any instrument with internal amplifier and matching temp device DryLoc ph/orp Preamplifier SIGNET 5 of 8

6 Notes SIGNET 6 of DryLoc ph/orp Preamplifier

7 Notes 2760 DryLoc ph/orp Preamplifier SIGNET 7 of 8

8 Ordering Information Mfr. Part No. Code Description Preamplifier with 3/4 in. NPT threads and 4.6 m (15 ft.) cable Preamplifier with 3/4 in. ISO threads and 4.6 m (15 ft.) cable Connector with 4.6 m (15 ft.) cable and 3/4 in. NPT threads Connector with 4.6 m (15 ft.) cable and ISO 7/1R 3/4 threads Accessories and Replacement Parts Calibration Tools ph/orp System Tester (adapter cable sold separately) Adapter Cable for use w/2760 DryLoc Preamplifier ph Buffer Kit (1 each 4, 7, 10 ph buffer in powder form, makes 50 ml) Cable, 6 conductor, 24 AWG shielded Mounting Hardware Universal Mount Junction Box /4 in. NPT Mount Junction Box Liquid Tight Connector Kit, NPT (1 connector) Liquid Tight Connector Kit, PG13.5 (1 connector) Electrodes DryLoc ph Electrodes Combination ph Electrode, 3KΩ RTD, flat glass HF Combination ph Electrode, HF Resistsant, 3KΩ RTD, flat glass Combination ph Electrode, 3KΩ RTD, bulb glass DI Combination ph Electrode, DI Resistant, 3KΩ RTD, bulb glass Differential ph Electrode, 3KΩ RTD, 1 in. NPT process connection Differential ph Electrode, PT1000 RTD, 1 in. NPT process connection Differential ph Electrode, 300Ω RTD, 1 in. NPT process connection Differential ph Electrode, 3KΩ RTD, 1 in. NPT process connection Differential ph Electrode, PT1000 RTD, 1 in. NPT process connection Differential ph Electrode, 300Ω RTD, 1 in. NPT process connection Combo flat ph Electrode, 3KΩ RTD, 3/4 in. NPT process connection Combo flat ph Electrode, PT1000 RTD, 3/4 in. NPT process connection Combo flat ph Electrode, 3KΩ RTD, 3/4 in. NPT process connection Combo flat ph Electrode, PT1000 RTD, 3/4 in. NPT process connection DryLoc ORP (Redox) Electrodes Combination ORP (Redox) Electrode, 10KΩ ID, flat glass Combination ORP Electrode, 10 KΩ ID, bulb glass Differential ORP (Redox) Electrode, 10KΩ ID, 1 in. NPT process connection Differential ORP (Redox) Electrode, PT1000 RTD, 1 in. NPT process connection Differential ORP (Redox) Electrode, 300Ω RTD, 1 in. NPT process connection Differential ORP (Redox) Electrode, 10KΩ ID, 1 in. NPT process connection Differential ORP (Redox) Electrode, PT1000 RTD, 1 in. NPT process connection Differential ORP (Redox) Electrode, 300Ω TC, 1 in. NPT process connection Combo flat ORP (Redox) Electrode, 10 KΩ ID, 3/4 in. NPT process connection Combo flat ORP (Redox) Electrode, no Temp, 3/4 in. NPT process connection Combo bulb ORP (Redox) Electrode, 10 KΩ ID, 3/4 in. NPT process connection Combo bulb ORP (Redox) Electrode, no Temp, 3/4 in. NPT process connection SIGNET George Fischer Signet Inc, 3401 Aerojet Avenue, El Monte, CA U.S.A. Tel. (626) Fax (626) For Worldwide Sales and Service, visit our website: Or call (in the U.S.): (800) GEORGE FISCHER +GF+ Piping Systems (A-3/04) English Scientific Company 2004 Printed in U.S.A. on Recycled Paper

Signet 2760 DryLoc ph/orp Preamplifier

Signet 2760 DryLoc ph/orp Preamplifier Signet 2760 DryLoc ph/orp Preamplifier *3-2760.090* 3-2760.090 Rev. H 05/11 English English SAFETY INSTRUCTIONS 1. Depressurize and vent system prior to installation or removal. 2. Confi rm chemical compatibility

More information

* * Rev. 9 01/18 Product Manual

* * Rev. 9 01/18 Product Manual English Signet 2760 DryLoc ph/orp Preamplifier *3-2760.090* 3-2760.090 Rev. 9 01/18 Product Manual Description The Signet 2760 ph/orp Preamplifiers with DryLoc connectors are part of Signet's growing line

More information

Signet 2760 DryLoc ph/orp Preamplifiers & Connectors

Signet 2760 DryLoc ph/orp Preamplifiers & Connectors Signet 2760 DryLoc ph/orp Preamplifiers & Connectors Features In-line integral mount and submersible installation versions Automatic temperature compensation Auto configuration for ph or ORP operation

More information

SIGNET 2750 ph/orp Sensor ENGLISH

SIGNET 2750 ph/orp Sensor ENGLISH ENGLISH 3-2750.090 B-8/01 English SAFETY INSTRUCTIONS FOR IN-LINE ELECTRODE INSTALLATION 1. Do not remove from pressurized lines. 2. Do not exceed maximum temperature/pressure specifications. 3. Wear safety

More information

Signet DryLoc ph/orp Electrodes

Signet DryLoc ph/orp Electrodes Signet 2774-2777 DryLoc ph/orp Electrodes Features Patented DryLoc connector with gold plated contacts* Special design allows for installation at any angle, even inverted or horizontal Quick temperature

More information

Signet DryLoc ph/orp Electrodes

Signet DryLoc ph/orp Electrodes Signet 2774-2777 DryLoc ph/orp Electrodes Features Patented DryLoc connector with gold plated contacts* Special design allows for installation at any angle, even inverted or horizontal Quick temperature

More information

Signet ph/orp Electrodes

Signet ph/orp Electrodes Signet 2724-2726 ph/orp Electrodes Compatible with ALL Signet ph/orp Instruments Features Flat Glass Protected Bulb Patented reference design for exceptional performance * Mounts in Signet standard fittings

More information

Signet 3719 ph/orp Wet-Tap

Signet 3719 ph/orp Wet-Tap Signet 3719 ph/orp Wet-Tap *3-3719.090* 3-3719.090 Rev H 09/07 English Do not exceed maximum temperature/pressure specifications. Wear safety goggles or face shield during installation/service. Do not

More information

Signet ph/orp Electrodes

Signet ph/orp Electrodes Signet 2734-2736 ph/orp Electrodes Compatible with Signet 8900/9900 Instruments Features Patented reference design for exceptional performance * Mounts in Signet standard fittings from DN15 to DN100 (½

More information

Signet ph/orp Electrodes

Signet ph/orp Electrodes Signet 2724-2726 ph/orp Electrodes Compatible with ALL Signet ph/orp Instruments Features Patented reference design for exceptional performance * Mounts in Signet standard fittings from DN15 to DN100 (½

More information

* * Signet 2450 Pressure Sensor. Product Manual. English. Description. Dimensions Rev /18

* * Signet 2450 Pressure Sensor. Product Manual. English. Description. Dimensions Rev /18 English Signet 2450 Pressure Sensor *32450.0901* 32450.0901 Rev. 13 03/18 Product Manual Description The 2450 Pressure Sensor has a onepiece injection molded PVDF body and ceramic diaphragm for superior

More information

SIGNET 3719 ph/orp Wet-Tap

SIGNET 3719 ph/orp Wet-Tap ENGLISH 3-3719.090 B-6/02 English Do not exceed maximum temperature/pressure specifications. Wear safety goggles or face shield during installation/service. Do not attempt to disassemble the retraction

More information

SIGNET 7002 Vortex Flow Sensor ENGLISH

SIGNET 7002 Vortex Flow Sensor ENGLISH SIGNET 7002 Vortex Flow Sensor ENGLISH 3-7002.090 C-7/02 English SAFETY INSTRUCTIONS 1. Do not remove from pressurized lines. 2. Never install sensor without O-Rings. 3. Confirm chemical compatibility

More information

Signet ph/orp Transmitter

Signet ph/orp Transmitter Signet 87501 ph/orp English *38750.0901* 38750.0901 Rev. F 3/06 English CAUTION! Remove power to unit before wiring input and output connections. Follow instructions carefully to avoid personal injury.

More information

Signet 3719 ph/orp Wet-Tap Assembly

Signet 3719 ph/orp Wet-Tap Assembly Signet 3719 ph/p Wet-Tap Assembly Features Electrode removal without process shutdown Space saving 45 mm (1.75 in.) short-stroke design Sealed pneumatic dampening for smooth and safe operation SafeLoc

More information

Signet Temperature Transmitter

Signet Temperature Transmitter Signet 80 Temperature English 80.090 80.090 Rev. G /0 English CAUTION! Remove power to unit before wiring input and output connections. Follow instructions carefully to avoid personal injury. Contents.

More information

SIGNET Vortex Flow Sensors ENGLISH

SIGNET Vortex Flow Sensors ENGLISH DN X DN X DN X DN X DN X DN X DN X SIGNET Vortex Flow Sensors ENGLISH 37000.090 C12/00 English 1. Mounting Location... 1 2. Installation... 1 3. Wiring Preparation... 2 4. Wiring Options Frequency Output

More information

Signet Conductivity/Resistivity Electrodes

Signet Conductivity/Resistivity Electrodes Signet 2818-2823 Conductivity/Resistivity Electrodes 2818 2819 2820 2821 2822 2823 Sanitary Features Standard process connections - Polypro - SS on 10 and 20 cell - Tri-clamp 1-1½ in., 2 in. - Opt. ½ in.

More information

SIGNET Temperature Transmitter

SIGNET Temperature Transmitter SIGNET 83501 Temperature *38350.0901* English 38350.0901 Rev. G 3/06 English CAUTION! Remove power to unit before wiring input and output connections. Follow instructions carefully to avoid personal injury.

More information

Signet Pressure Transmitter

Signet Pressure Transmitter Signet 8450 Pressure English 8450.090 8450.090 Rev. G /06 English CAUTION! Remove power to unit before wiring input and output connections. Follow instructions carefully to avoid personal injury. Contents

More information

Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems with PVDF Sensor

Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems with PVDF Sensor Signet 2850 Conductivity/Resistivity Sensor Electronics and Integral Systems with PVDF Sensor Features Test certificate supplied with all sensors Universal Mount Custom cell constant programmed into the

More information

Signet 7000/7001 Vortex Flow Sensors * *

Signet 7000/7001 Vortex Flow Sensors * * DN X DN X DN X DN X DN X DN X DN X Signet 7000/7001 Vortex Flow Sensors *3-7000.090* 3-7000.090 Rev. F 10/05 English English 1. Mounting Location... 1 2. Installation... 1 3. Wiring Preparation... 2 4.

More information

Signet Conductivity/Resistivity Electrodes

Signet Conductivity/Resistivity Electrodes Signet 2818-2823 Conductivity/Resistivity Electrodes 2818 2819 2820 2821 2822 2823 Sanitary Features Standard process connections - Polypro - SS on 10 and 20 cell - Tri-clamp 1-1½ in., 2 - Opt. ½ in. NPT

More information

Signet V(D) to V(D) PVDF Conductivity Electrodes

Signet V(D) to V(D) PVDF Conductivity Electrodes Signet 2839-1V(D) to 2842-1V(D) PVDF Conductivity Electrodes Features ± 2% accuracy - Custom calibration certificate provided Dual-threaded Compact electrode length for easy in-line installation in small

More information

Pipe fittings MUST be installed by a certified welder only. +GF+ SIGNET will not assume liability of any kind for improper fitting installations.

Pipe fittings MUST be installed by a certified welder only. +GF+ SIGNET will not assume liability of any kind for improper fitting installations. +GF+ SIGNET 0 High Performance Flow Sensor (English) -0.090- F-/99 English SAFETY INSTRUCTIONS. Do not remove from pressurized lines.. Do not exceed maximum temperature/pressure specifications.. Do not

More information

Signet 2517 Brass Paddlewheel Flow Sensor * *

Signet 2517 Brass Paddlewheel Flow Sensor * * Signet 2517 Brass Paddlewheel Flow Sensor -250.090 English -2517.090 Rev. F 11/06 English SAFETY INSTRUCTIONS 1. Do not remove from pressurized lines. 2. Do not exceed maximum temperature/pressure specifi

More information

* * Rev. F 03/16 Operating Instructions

* * Rev. F 03/16 Operating Instructions English Signet 2552 Metal Magmeter *3-2552.090* 3-2552.090 Rev. F 03/16 Operating Instructions 3-2552-2 3-2552-3 Description The Signet 2552 Metal Magmeter from Georg Fischer features all-stainless steel

More information

ph/orp Sensor Model 399 ph/orp

ph/orp Sensor Model 399 ph/orp Model 399 ph/orp Product Data Sheet PDS 71-399 September 1999 ph/orp Sensor DOUBLE JUNCTION REFERENCE CELL provides longer sensor life in process solutions containing poisoning ions. ONE-PIECE CONSTRUCTION

More information

Pipe fi ttings MUST be installed by a certifi ed welder only. Signet will not assume liability of any kind for improper fi tting installations.

Pipe fi ttings MUST be installed by a certifi ed welder only. Signet will not assume liability of any kind for improper fi tting installations. Signet 50 High Performance Flow Sensor English *3-50.090* 3-50.090 C 05/06 English SAFETY INSTRUCTIONS 1. Do not remove from pressurized lines.. Do not exceed maximum temperature/pressure specifi cations.

More information

NEW QUICK CABLE-TO-SENSOR RELEASE,

NEW QUICK CABLE-TO-SENSOR RELEASE, Models 399 and 399VP Product Data Sheet PDS 71-399 October 2000 ph/orp Sensors NEW OPTIONS to meet a variety of application requirements, including: * Low ionic strength water * Processes with hydrofluoric

More information

Pipe fi ttings MUST be installed by a certifi ed welder only. Signet will not assume liability of any kind for improper fi tting installations.

Pipe fi ttings MUST be installed by a certifi ed welder only. Signet will not assume liability of any kind for improper fi tting installations. Signet 50 High Performance Flow Sensor English *3-50.090* 3-50.090 Rev. F 11/1 English For the most up-to-date information, please refer to our website at www.gfsignet.com SAFETY INSTRUCTIONS 1. Do not

More information

User s Guide Shop online at omega.com SM For latest product manuals: CDE-285X SERIES Conductivity Sensors

User s Guide Shop online at omega.com SM   For latest product manuals:   CDE-285X SERIES Conductivity Sensors User s Guide Shop online at omega.com SM e-mail: info@omega.com For latest product manuals: www.omegamanual.info CDE-285X SERIES Conductivity Sensors omega.com info@omega.com U.S.A. Headquarters: Servicing

More information

Signet 2552 Metal Magmeter

Signet 2552 Metal Magmeter Signet 2552 Metal Magmeter *3-2552.090* 3-2552.090 Rev E 07/10 English English SAFETY INSTRUCTIONS 1. Depressurize and vent systems without Hot-tap valve prior to installation or removal. 2. Confirm chemical

More information

Signet 2552 Metal Magmeter

Signet 2552 Metal Magmeter Signet 2552 Metal Magmeter *3-2552.090* 3-2552.090 Rev D 06/08 English English SAFETY INSTRUCTIONS 1. Depressurize and vent systems without Hot-tap valve prior to installation or removal. 2. Confi rm chemical

More information

Signet 4150 Turbidimeter

Signet 4150 Turbidimeter C L I S T E D 113783 US 4150 Turbidimeter Features Description The 4150 Turbidimeter system provides accurate and reliable compliant water quality monitoring for municipal and industrial applications.

More information

Signet Pressure Transmitter

Signet Pressure Transmitter Signet 80 Pressure 80.090 80.090 Rev. J 0/ English CAUTION! Remove power to unit before wiring input and output connections. Follow instructions carefully to avoid personal injury. Contents. Installation.

More information

+GF+ SIGNET Conductivity Transmitter. Instruction Manual GEORGE FISCHER +GF+

+GF+ SIGNET Conductivity Transmitter. Instruction Manual GEORGE FISCHER +GF+ +GF+ SIGNET 3-8800 Conductivity Transmitter Instruction Manual GEORGE FISCHER +GF+ SAFETY INSTRUCTIONS 1. Do not remove from pressurized lines. 2. Do not exceed maximum temperature/pressure specifications.

More information

Measurement and Instrumentation

Measurement and Instrumentation 15 Measurement and Instrumentation Use the postcard included in this handbook or call (800) 854-4090 to order the complete Instrumentation Catalog or visit www.gfsignet.com for detailed product information.

More information

General Purpose ph/orp Sensors

General Purpose ph/orp Sensors General Purpose ph/orp Sensors Product Data Sheet LIQ_PDS_3900 September 2013 General Purpose ph/orp Sensors SMART preamplifier-stores calibration and other data. Extended sensor life provided by double

More information

Chapter Page. 1 Introduction Description 1

Chapter Page. 1 Introduction Description 1 Chapter Page 1 Introduction 1 1.1 Description 1 Table of Contents 2 Calibration 3 2.1 Wet Calibration 3 2.2 Calibration Procedure 4 2.3 Installing Optional Display Board 5 2.4 Display Board Range Adjustment

More information

General Purpose ph/orp Sensors

General Purpose ph/orp Sensors Product Data Sheet PDS 71-3900/rev. B December 2010 Models 3900 and 3900VP General Purpose ph/orp Sensors EXTENDED SENSOR LIFE provided by double junction reference. ENHANCED PERFORMANCE AND INCREASED

More information

Instrument Enclosure Assemblies

Instrument Enclosure Assemblies Instrument Enclosure Assemblies Standard instrument enclosure Instrument enclosures offer a simple solution for the customer who doesn t have the time to install Signet meters into panels. Whether it s

More information

Signet 515 Rotor-X Paddlewheel Flow Sensors

Signet 515 Rotor-X Paddlewheel Flow Sensors Signet 515 Rotor-X Paddlewheel Flow Sensors Features Operating range 0.3 to 6 m/s (1 to 20 ft/s) Wide turndown ratio of 20:1 Highly repeatable output Simple, economical design Installs into pipe sizes

More information

Signet 515 Rotor-X Paddlewheel Flow Sensors

Signet 515 Rotor-X Paddlewheel Flow Sensors Signet 515 Rotor-X Paddlewheel Flow Sensors Features Operating range 0.3 to 6 m/s (1 to 20 ft/s) Wide turndown ratio of 20:1 Highly repeatable output Simple, economical design Installs into pipe sizes

More information

Models 396/396P/396R. Retraction/Submersion/Insertion ph/orp Sensor

Models 396/396P/396R. Retraction/Submersion/Insertion ph/orp Sensor Models 396/396P/396R Product Data Sheet PDS 71-TUpH September 1999 Retraction/Submersion/Insertion ph/orp Sensor MINIMUM SENSOR MAINTENANCE due to patented TUpH reference technology 1 which ensures steady

More information

Signet 2536 Rotor-X Paddlewheel Flow Sensors

Signet 2536 Rotor-X Paddlewheel Flow Sensors Signet 2536 Rotor-X Paddlewheel Flow s Features Operating range 0.1 to 6 m/s (0.3 to 20 ft/s) Wide turndown ratio of 66:1 Open-collector output Highly repeatable output Simple, economical design PVC (gray

More information

* * Rev M 10/14 Operating Instructions

* * Rev M 10/14 Operating Instructions English Signet 55 Blind Magmeter *-55.090* -55.090 Rev M 0/ Operating Instructions Description The Signet 55 Magmeter is an insertion-style magnetic flow sensor. The patented sensor design is available

More information

User s Guide CDCE-90-X SERIES. Conductivity Sensors. Shop online at omega.com SM

User s Guide CDCE-90-X SERIES. Conductivity Sensors. Shop online at omega.com SM User s Guide Shop online at omega.com SM e-mail: info@omega.com For latest product manuals: www.omegamanual.info CDCE-90-X SERIES Conductivity Sensors omega.com info@omega.com U.S.A. Headquarters: Servicing

More information

Encapsulated Differential ph and ORP Sensors (available in LCP, foreground, or Ryton body materials)

Encapsulated Differential ph and ORP Sensors (available in LCP, foreground, or Ryton body materials) Technology For Solutions Data Sheet LRE/102 Supersedes LRE/400 Encapsulated Differential ph and ORP Sensors (available in LCP, foreground, or Ryton body materials) Common Features Differential Electrode

More information

Signet 515/2536 Rotor-X Flow Sensors * * Operating Instructions. English. Description Rev. X 05/17

Signet 515/2536 Rotor-X Flow Sensors * * Operating Instructions. English. Description Rev. X 05/17 English Signet 515/2536 Rotor-X Flow Sensors *3-0515.090* 3-0515.090 Rev. X 05/17 Operating Instructions 515 Sensor (with red cap) 2536 Sensor (with blue cap) 8510 Integral Sensor 8512 Integral Sensor

More information

Insertion/Submersion Flow Through Sensor

Insertion/Submersion Flow Through Sensor Product Data Sheet PDS 71-381/rev.B September 2004 Model 381 ph/orp Insertion/Submersion Flow Through Sensor ADVANCED ON-LINE SENSOR DIAGNOSTICS 1 (Model 381+ only), for use with the Models 54e ph/orp

More information

7777 Immersion/In-Line Mounting for Meredian II ph/orp Electrodes Installation and Maintenance Manual

7777 Immersion/In-Line Mounting for Meredian II ph/orp Electrodes Installation and Maintenance Manual 7777 Immersion/In-Line Mounting for Meredian II ph/orp Electrodes Installation and Maintenance Manual 70-82-25-05 Rev. 1 3/08 Honeywell Process Solutions Copyright, Notices, and Trademarks Printed in U.S.A.

More information

OPERATING INSTRUCTION MANUAL

OPERATING INSTRUCTION MANUAL OPERATING INSTRUCTION MANUAL MODEL P/R65 DIFFERENTIAL 2-WIRE (4-20 ma) ph & ORP PROBES N116-139 REV. 0 Aquametrix, by Water Analytics Inc. 100 School Street Andover, MA 01810 Tel: (978) 749-9949 Toll Free:

More information

Signet 2552 Magmeter. English * * Specifications. Safe to operate Hot-tap

Signet 2552 Magmeter. English * * Specifications. Safe to operate Hot-tap Signet 2552 Magmeter *3-2552.090* 3-2552.090 Rev. A 11/06 English SAFETY INSTRUCTIONS 1. Depressurize and vent systems without Hot-tap valve prior to installation or removal. 2. Confi rm chemical compatibility

More information

+GF+ SIGNET 2550 Insertion Magmeter

+GF+ SIGNET 2550 Insertion Magmeter +GF+ SIGNET 2550 Insertion Magmeter Instruction Manual GEORGE FISCHER +GF+ Important Safety Information! CAUTION: Do not remove from pressurized lines! Do not remove safety ring from sensor. Unit may become

More information

OPERATING INSTRUCTION MANUAL MS SERIES CONDUCTIVITY CELLS

OPERATING INSTRUCTION MANUAL MS SERIES CONDUCTIVITY CELLS OPERATING INSTRUCTION MANUAL MS SERIES CONDUCTIVITY CELLS REV. 3.1 Water Analytics, Inc. 100 School Street Andover, MA 01810 978-749-9949 Toll free: 855-747-7623 Fax: 978-749-9961 www.wateranalytics.net

More information

Accessories Guide ph/orp/conductivity Sensors

Accessories Guide ph/orp/conductivity Sensors Jet Cleaners and Scrubber Accessories Isolation Ball Valves Assemblies Compression Fittings and Sheath Sets High Pressure (2500 PSIG) Sensor Housings In-line Flow Cells Nut Lock Union Style Adapters Sensor

More information

GF Signet. Measurement & Control Sensors. Signet Price List 1st Aug 2011 Rev 0.0

GF Signet. Measurement & Control Sensors. Signet Price List 1st Aug 2011 Rev 0.0 GF Signet Measurement & Control Sensors Sensors and Transmitters: Flow ph Conductivity ORP Level Pressure Temperature Turbidity Chlorine Installation fittings Power supplies Calibration solutions Accessories

More information

User s Guide PH-2720-PA. Preamplifier. Shop online at.

User s Guide PH-2720-PA. Preamplifier. Shop online at. User s Guide Shop online at www.omega.com e-mail: info@omega.com Preamplifier OMEGAnet Online Service www.omega.com Internet e-mail info@omega.com Servicing North America: USA: One Omega Drive, P.O. Box

More information

Signet 2551 Magmeter Flow Sensor

Signet 2551 Magmeter Flow Sensor Signet 2551 Magmeter Flow Sensor Available in a variety of wetted materials and ideal for pipe sizes up to DN900 (36 in.) Features Test certificate included for -X0, -X1 Patented Magmeter technology No

More information

Conductivity Sensors. Model 140, 141, 142. Product Data Sheet series/rev.a June 1998

Conductivity Sensors. Model 140, 141, 142. Product Data Sheet series/rev.a June 1998 Product Data Sheet 71-140 series/rev.a June 1998 Model 140, 141, 142 Conductivity Sensors HIGH TEMPERATURE 316 SS AND PEEK CON- STRUCTION operates up to 200 C (392 F). MODEL 140 RETRACTABLE SENSOR installs

More information

7777D In-Line Mounting for Durafet II ph Electrodes Installation and Maintenance

7777D In-Line Mounting for Durafet II ph Electrodes Installation and Maintenance 7777D In-Line Mounting for Durafet II ph Electrodes Installation and Maintenance 70-82-25-121 Rev. 0 3/07 Honeywell Process Solutions Industrial Measurement and Control Copyright, Notices, and Trademarks

More information

Measurement & Instrumentation 2005 Product Catalog on CD. Creating Quality by Connecting Technology to Life. Click on image to begin.

Measurement & Instrumentation 2005 Product Catalog on CD. Creating Quality by Connecting Technology to Life. Click on image to begin. Measurement & Instrumentation 2005 Product Catalog on CD Creating Quality by Connecting Technology to Life Click on image to begin. Main Contents Measurement & Instrumentation 2005 Product Catalog Flow

More information

Analytical Instruments Two-Electrode Conductivity Sensors

Analytical Instruments Two-Electrode Conductivity Sensors Data Sheet Analytical Instruments Two-Electrode Conductivity Sensors Model TB2 Superior accuracy in low conductivity measurement ranges. Measurement ranges from 0 to 199.9 µs/cm to 0 to 19.99 ms/cm. Resolution

More information

2100 Turbine Flow Sensor

2100 Turbine Flow Sensor 200 Turbine Flow Sensor Description Engineered specifically for small pipe diameter applications, the Signet 200 Turbine Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3

More information

Hydro-Flow 2200 Fixed Insertion Vortex Flow Meter

Hydro-Flow 2200 Fixed Insertion Vortex Flow Meter A trademark of Spirax Sarco, Inc. Hydro-Flow 2200 Fixed Insertion Vortex Flow Meter Description The Hydro-Flow Model 2200 fixed insertion vortex flow meter was designed specifically for water flow measurement,

More information

TUpH Retraction/Submersion/Insertion ph/orp Sensors

TUpH Retraction/Submersion/Insertion ph/orp Sensors Product Data Sheet PDS 71-TUpHVP/rev.B June 2003 Models 396VP, 396RVP, 398VP, & 398RVP TUpH Retraction/Submersion/Insertion ph/orp Sensors SILCORE 3 TECHNOLOGY PROVIDES INCREASED SENSOR LIFE when used

More information

* * Rev /18 Operating Instructions

* * Rev /18 Operating Instructions English Signet 255 Blind Magmeter *-2552.090* -255.090 Rev. 6 07/8 Operating Instructions Description The Signet 255 Magmeter is an insertion-style magnetic flow sensor. The patented sensor design is available

More information

8000 Series ph/orp Electrode Platform Product Instructions

8000 Series ph/orp Electrode Platform Product Instructions 8000 Series ph/orp Electrode Platform Product Instructions Introduction Congratulations on your purchase of your Sensorex S8000 series electrode platform. The platform is designed in a modular fashion

More information

Toroidal Conductivity Sensor

Toroidal Conductivity Sensor Instruction Sheet PN 51A-222/rev.A January 2011 Model 222 Toroidal Conductivity Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. SPECIFICATIONS Wetted

More information

General Purpose Conductivity Sensors ENDURANCE. Model 400 and 400VP Series. Product Data Sheet PDS /rev.K February 2013

General Purpose Conductivity Sensors ENDURANCE. Model 400 and 400VP Series. Product Data Sheet PDS /rev.K February 2013 Product Data Sheet PDS 71-400/rev.K February 2013 Model 400 and 400VP Series ENDURANCE General Purpose Conductivity Sensors INITIAL CALIBRATION NOT REQUIRED. Factory-measured cell constant ensures out-of-the-box

More information

General Purpose Conductivity Sensors ENDURANCE. Model 400 and 400VP Series. Product Data Sheet PDS /rev.G February 2006

General Purpose Conductivity Sensors ENDURANCE. Model 400 and 400VP Series. Product Data Sheet PDS /rev.G February 2006 Product Data Sheet PDS 71-400/rev.G February 2006 Model 400 and 400VP Series ENDURANCE General Purpose Conductivity Sensors INITIAL CALIBRATION NOT REQUIRED. Pre-determined cell constant ensures out-of-the

More information

7777 Immersion/In-Line Mounting for Durafet II ph Electrodes Installation and Maintenance

7777 Immersion/In-Line Mounting for Durafet II ph Electrodes Installation and Maintenance 7777 Immersion/In-Line Mounting for Durafet II ph Electrodes Installation and Maintenance 70-82-25-86 Rev. 1 4/00 Sensing and Control Copyright, Notices, and Trademarks Printed in U.S.A. Copyright 2000

More information

Table of Contents 1. OVERVIEW OPERATION FUNCTION SPECIFICATIONS INSTRUMENT LAYOUT INSTALLATION...

Table of Contents 1. OVERVIEW OPERATION FUNCTION SPECIFICATIONS INSTRUMENT LAYOUT INSTALLATION... Table of Contents 1. OVERVIEW... 2 2. OPERATION FUNCTION... 2 3. SPECIFICATIONS... 3 4. INSTRUM LAYOUT... 4 4.1 OPERATION KEY...4 4.2 INDICATORS...4 5. INSTALLATION... 5 5.1. ENVIRONM CONDITIONS...5 5.2

More information

Signet Measurement and Instrumentation

Signet Measurement and Instrumentation F Piping Systems Signet Measurement and Instrumentation Price List effective January 1, 2015 Conveyance Pipe, Fittings, Joining Technology // PVC/CPVC // PPro-Seal PP // PROEF PP // SYEF PVDF // Contain-It

More information

ABB MEASUREMENT & ANALYTICS DATA SHEET. TBX5 ph, Redox (ORP) sensors with diagnostics

ABB MEASUREMENT & ANALYTICS DATA SHEET. TBX5 ph, Redox (ORP) sensors with diagnostics BB MESUREMENT & NLYTICS DT SHEET TBX ph, Redox (ORP) sensors with diagnostics Measurement made easy The most durable ph / Redox (ORP) sensors in the world Next Step Solid State reference eliminates poisoning,

More information

Automation Made Easy 2013 Signet Measurement and Control Product Catalog

Automation Made Easy 2013 Signet Measurement and Control Product Catalog Multi-Parameter Chlorine Dissolved Oxygen Turbidity Flow ph/orp Conductivity/Resistivity Temperature Pressure Level Automation Made Easy 2013 Signet Measurement and Control Product Catalog Automation Made

More information

Combination ph/redox (ORP) Sensors

Combination ph/redox (ORP) Sensors Data Sheet Combination ph/redox (ORP) s Series AP00 User-customizable for Insertion, Flow-through, Immersion, Hot-tap Retractor ideal for Original Equipment Manufacturers and general applications Economical

More information

Combination ph/redox (ORP) Sensors

Combination ph/redox (ORP) Sensors Data Sheet SS/AP00_ Combination ph/redox (ORP) s AP00 Series User-customizable for Insertion, Flow-through, Immersion and Hot-tap Retractor ideal for OEMs (Original Equipment Manufacturers) and general

More information

Conductivity Sensors. Model 140, 141, 142. Product Data Sheet series/rev.b February 2011

Conductivity Sensors. Model 140, 141, 142. Product Data Sheet series/rev.b February 2011 Product Data Sheet 71-140 series/rev.b February 2011 Model 140, 141, 142 Conductivity Sensors RUGGED CONSTRUCTION withstands high temperature and pressure TWO MOUNTING CONFIGURATIONS: screw-in and retractable

More information

Rosemount 3300HT/3300HTVP/3400HT/ 3400HTVP/3500P/3500VP

Rosemount 3300HT/3300HTVP/3400HT/ 3400HTVP/3500P/3500VP Instruction Manual LIQ-MAN-PERpH-X Rev. J April 2017 Rosemount 3300HT/3300HTVP/3400HT/ 3400HTVP/3500P/3500VP PERpH-X High Performance ph/orp Sensors hasgkas Essential Instructions Read this page before

More information

General Purpose Conductivity Sensors ENDURANCE. Model 400 and 400VP Series. Product Data Sheet PDS /rev.I December 2008

General Purpose Conductivity Sensors ENDURANCE. Model 400 and 400VP Series. Product Data Sheet PDS /rev.I December 2008 Product Data Sheet PDS 71-400/rev.I December 2008 Model 400 and 400VP Series ENDURANCE General Purpose Conductivity Sensors INITIAL CALIBRATION NOT REQUIRED. Pre-determined cell constant ensures out-of-the

More information

A1 Commercial Grade Meters

A1 Commercial Grade Meters A1 Commercial Grade Meters Commercial Grade Meters are designed as self-contained, battery powered units. These indicating meters come in Aluminum or Nylon only. A1 Meters are not field serviceable like

More information

Conductivity Sensors. Applications. 140 Series Conductivity Sensors Product Data Sheet LIQ_PDS_140_141_142_Conductivity_Sensors January 2014

Conductivity Sensors. Applications. 140 Series Conductivity Sensors Product Data Sheet LIQ_PDS_140_141_142_Conductivity_Sensors January 2014 140 Series Conductivity Sensors Product Data Sheet LIQ_PDS_140_141_142_Conductivity_Sensors January 2014 Conductivity Sensors Rugged construction withstands high temperature and pressure Two Mounting Configurations:

More information

AD592/592-10K Non-Room Sensors in BAPI-Box, BAPI-Box 2 or BAPI-Box 4 BA/592-x-(BB, BB2, BB4) Temperature Sensor Instructions & Operation

AD592/592-10K Non-Room Sensors in BAPI-Box, BAPI-Box 2 or BAPI-Box 4 BA/592-x-(BB, BB2, BB4) Temperature Sensor Instructions & Operation 592 Theory of Operation The 592 sensor is a two terminal integrated-circuit temperature sensor. The 592 provides an output current directly proportional to absolute temperature. When the temperature of

More information

Retractable ph/orp Sensors

Retractable ph/orp Sensors Model 396R and 396RVP Instruction Manual PN 5100396R January 2001 Retractable ph/orp Sensors ESSENTIAL INSTRUCTIONS READ THIS PAGE BEFORE PROCEEDING! Rosemount Analytical designs, manufactures, and tests

More information

PRESSURE TRANSDUCERS. Specifications. Individual Specifications

PRESSURE TRANSDUCERS. Specifications. Individual Specifications 00 Series and 00 Heavy Duty Series Compact OEM Pressure Transmitters 0 50 psi to 0-0,000 psi ranges (0-.5 bar to 0-,00 bar) High Proof Pressures Broad Choice of Outputs RoHS Compliant For OEMs that need

More information

Signet Measurement and Instrumentation

Signet Measurement and Instrumentation F Piping Systems Signet Measurement and Instrumentation Price List effective January 1, 2018 NEW! DryLoc ph/orp Smart Sensor Electronics See page 37 for new lower pricing on Portaflow Ultrasonic Flow Meters!

More information

ACTIVE ELECTRODELESS SENSORS Instruction Manual

ACTIVE ELECTRODELESS SENSORS Instruction Manual W A L C H E M An Iwaki America Company Active Electrodeless Sensors ACTIVE ELECTRODELESS SENSORS Instruction Manual Five Boynton Road Hopping Brook Park Holliston, MA 01746 USA TEL: 508-429-1110 FAX: 508-429-7433

More information

P2050S-030, 1/2, Electronic Pressure Independent Valve Stainless Steel Ball and Stem, Female NPT Ends

P2050S-030, 1/2, Electronic Pressure Independent Valve Stainless Steel Ball and Stem, Female NPT Ends P2050S-030, 1/2, Electronic Pressure Independent Valve Stainless Steel Ball and Stem, Female NPT Ends Application Water-side control of heating and cooling systems for AHUs and water coils. Equal Percentage/

More information

2-ELECTRODE CONDUCTIVITY SENSORS

2-ELECTRODE CONDUCTIVITY SENSORS LAKEWOOD INSTRUMENTS MODEL 540 2-ELECTRODE CONDUCTIVITY SENSORS INSTALLATION & OPERATION MANUAL 540K.1 540K.01 Lakewood Instruments 7838 North Faulkner Road, Milwaukee, WI 53224 USA Phone (800) 228-0839

More information

User s Guide FMG-550 SERIES OMEGAMAG. Shop online at omega.com SM For latest product manuals:

User s Guide FMG-550 SERIES OMEGAMAG. Shop online at omega.com SM   For latest product manuals: User s Guide Shop online at omega.com SM e-mail: info@omega.com For latest product manuals: www.omegamanual.info FMG-550 SERIES OMEGAMAG omega.com info@omega.com U.S.A. Headquarters: Servicing North America:

More information

Rosemount TM 222 Toroidal Flow-Through Conductivity Sensor. Instruction Manual LIQ-MAN-222 Rev.D June 2017

Rosemount TM 222 Toroidal Flow-Through Conductivity Sensor. Instruction Manual LIQ-MAN-222 Rev.D June 2017 Rosemount TM 222 Toroidal Flow-Through Conductivity Sensor Instruction Manual LIQ-MAN-222 Rev.D June 2017 SPECIFICATIONS Wetted Materials: Teflon-lined carbon steel pipe, with carbon steel outer flanges.

More information

Selectable ranges and an LCD are a technician s best friend, that s why we make them standard on every dry media differential pressure sensor!

Selectable ranges and an LCD are a technician s best friend, that s why we make them standard on every dry media differential pressure sensor! PRESSURE SENSORS PRESSURE PDP3 Series 0-2 32 PDP3 Series 0-10, 0-25 34 PG Gauge Series 36 PW Wet-Wet Series (Cable Version) 38 PW Wet-Wet Series (Conduit Version) 40 PW Series Ordering Guidance 42 Selectable

More information

TUpH 396, 396VP, 396P, 396PVP, 396R, 396RVP

TUpH 396, 396VP, 396P, 396PVP, 396R, 396RVP TUpH 396, 396VP, 396P, 396PVP, 396R, 396RVP Product Data Sheet LIQ-PDS-396P-PVP-R-RVP April 2016 TUpH 396, 396VP, 396P, 396PVP, 396R, 396RVP Retraction/Submersion/Insertion ph/orp Sensors Smart enabled

More information

Hydro-Flow 2300 Fixed Insertion Vortex Flow Meter

Hydro-Flow 2300 Fixed Insertion Vortex Flow Meter Hydro-Flow 2300 Fixed Insertion Vortex Flow Meter Description The Hydro-Flow Model 2300 insertion vortex flow meter was designed specifically for water flow measurement, containing no moving parts like

More information

MS Application. Features. Proportional Valve Actuator General Instructions

MS Application. Features. Proportional Valve Actuator General Instructions Proportional Valve Actuator Application The Proportional Valve Actuator is a non-spring return actuator used with proportional to 10 Vdc or 4 to 0 ma controllers and standard 1/" to 1-1/4" two-way and

More information

INTERNATIONAL METAL ENGINEERING

INTERNATIONAL METAL ENGINEERING INDICATING TEMPERATURE TRANSMITTER WITH HART 8080HT UNIVERSAL SETTINGS WITH HART PROTOCOL FOR VARIOUS INPUT SIGNALS 2 WIRE TECHNOLOGY, 4 TO 20mA ANALOG OUTPUT HIGH ACCURACY IN TOTAL AMBIENT TEMPERATURE

More information

Combination ph/orp Sensor

Combination ph/orp Sensor Model GP1 Instruction Manual PN 5100GP1 May 1999 Combination ph/orp Sensor ESSENTIAL INSTRUCTIONS READ THIS PAGE BEFORE PROCEEDING! Rosemount Analytical designs, manufactures, and tests its products to

More information

User s Guide FP-5060 SERIES. Micro-Flow Sensors. Shop online at omega.com SM For latest product manuals:

User s Guide FP-5060 SERIES. Micro-Flow Sensors. Shop online at omega.com SM   For latest product manuals: User s Guide Shop online at omega.com SM e-mail: info@omega.com For latest product manuals: www.omegamanual.info FP-5060 SERIES Micro-Flow Sensors omega.com info@omega.com U.S.A. Headquarters: Servicing

More information