Wheels & Tires Group. Manual No ELECTRIC CLUTCH HYDRO DRIVE 4 LT-200 SERIES

Transcription

1 ELT2246 PIÈCES DÉTACHÉES Tondeuse Autoportée Avertissement! Lire et comprendre le présent manuel dans son intégralité avant d utiliser cette machine ou de procéder à son entretien et à son contrôle. Conserver ce manuel avec soin afin de pouvoir le consulter pour l utilisation, l entretien, ou le contrôle de cette machine. BÉAL, MES CHOIX NATURE

2

3 Parts Manual for ELECTRIC CLUTCH HYDRO DRIVE RMO & ACS TRACTORS LT-200 SERIES Model No. Description ELT ELT ELT ELT18538F ELT185F ELT ELT ELT ELT ELT ELT LT LT LT LT LT2250 Decks: " Deck " Deck (French) " Deck Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, U.S.A Manual No Revision: C 1/12/2012

4 Table Of Contents PAGE GROUP 4 Wheels & Tires Group 6 Hood, Grille & Dash Group 8 Seat Deck & Fuel Tank Group 10 Steering Group 12 Frame & Front Axle Group 16 Controls Group 18 Engine Group - 18HP, 20HP & 22HP Briggs & Stratton 22 Transmission Group 24 Transmission SERVICE PARTS - Tuff Torq K46BP 28 Transmission SERVICE PARTS - Tuff Torq K46BL 32 Lift Group - Manual 34 38" & 42" Mower Deck - Housing, Arbors & Blades Group 36 38" & 42" Mower Deck - Belt, Idler Arm & Hitch Group 38 38" & 42" Mower Deck - Height Adjustment & Roller Bar Group 40 French Guard Group - 38" 42 44" Mower Deck - Housing, Arbors & Blades Group 44 44" & 50" Mower Deck - Belt, Idler Arm & Hitch Group 46 44" & 50" Mower Deck - Height Adjustment & Roller Bar Group 48 46" Mower Deck - Housing, Arbor & Blades Group 50 46" Mower Deck - Clutch Group 52 46" Mower Deck - Height Adjustment Group 54 50" Mower Deck - Housing, Arbors & Blades Group 56 Decals Group 58 Electrical Group ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 3 Manual No TP C-TC-N

5 Wheels & Tires Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 4 LT-200 SERIES

6 Wheels & Tires Group Item Part No Qty Description WHEEL & TIRE ASSEMBLY, Front TIRE, Turf 15 X Saver TL TUBE, Tire, Front WHEEL & BUSHINGS ASSEMBLY, Front BEARING FITTING, Grease, 1/4-28 Thread VALVE STEM & CAP WASHER, 3/ WASHER, Flat, 3/4 x 1-1/4 (Model & Only) WASHER, Special Yellow RING, Retaining RING, Retaining, 3/4 (Model & Only) CAP, Hub CAP, Hub (Model & Only) KEY, 3/16 x 3/16 x KEY, 3/16 x 3/16 x 2 (Model & Only) WASHER SPACER, 0.77 ID x 1-1/4 OD x 1.65 LG Powdered Metal Black WHEEL & TIRE ASSEMBLY, Rear 20" WHEEL & TIRE ASSEMBLY, Rear 22" TIRE, Turf 20 X Saver TL TIRE, Turf 22 X Saver TL TUBE, Tire, Rear, 22 X TUBE, Tire, Rear, 22 X WHEEL, Hub WASHER, 3/4 x 1-7/8 (Model & Only) Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 5 Manual No

7 Hood, Grille & Dash Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 6 LT-200 SERIES

8 Hood, Grille & Dash Group Item Part No Qty Description D 1 HOOD, W/Scoop CAPSCREW, Whizlock, 1/4-20 x 5/ DUCT, Air Inlet Plastic (Was ) SCREW, Pan Head #10-24 x 1/ PUSH NUT KNOB, Cruise Lock Green Plastic COVER, Steering Shaft Plastic CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/ WASHER, Plain, 5/ KNOB, Brake Lock Plastic DASHBOARD GUIDE, Hood RH WASHER RIVET, Pop, Stem Black GUIDE, Hood LH NUT, Hex Flange Whiz, 1/ D 1 PANEL, Hood, LH Side ROD, Dash Support SCREW, Taptite, 1/4-20 x 1/ NUT, Hex, Nylon, Lock, # A 1 HINGE, Hood LH A 1 HINGE, Hood RH D 1 GRILLE LE D 1 PANEL, Hood, RH Side INSERT, Lightbar HEADLIGHT ASSEMBLY POSITIONER, Hood od Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 7 Manual No

9 Seat Deck & Fuel Tank Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 8 LT-200 SERIES

10 Item Part No Qty Description SEAT, Low Back (Used on only) SEAT, Hi Back, Steel Pan WASHER, Plain, 5/ LATCH, Seat 20GA E-Coat CAPSCREW, Hex Head Flange Dog Point, 5/16-18 x SPACER, Powdered Metal Yellow A 1 SUPPORT, Seat 12GA BOLT, Carriage, 5/16-18 x 3/ A 1 PIVOT, Seat 10GA BOLT, Carriage, 5/16-18 x 3/ NUT, Hex Flange, 5/16-18 ESNA BOLT, Shoulder 5/16-18 G SPRING, Compression WASHER, Spring Black COVER, Spring POD, LH Cup Holder ELBOW FITTING BUSHING TANK, Fuel CAP, Gas PAD, Footrest LH NUT, Hex, Flange Whizlock, 5/ PAD, Footrest RH D 1 DECK, Seat w/footrests (Red) SCREW, Hex, Washer Head, Plastite, 1/4-20 x 1/ SCREW, Taptite, 5/16-18 x 5/ POD, RH Lift Quadrant A 1 SUPPORT, Seat Deck Seat Deck & Fuel Tank Group Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 9 Manual No

11 Steering Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 10 LT-200 SERIES

12 Steering Group Item Part No Qty Description CAP, Steering Wheel, Plain NUT, Hex Lock, ESNA Light, 5/8-18, Thin WASHER, 5/ STEERING WHEEL, w/aluminum Insert RING, Klipring Extension WASHER BUSHING, Steering SHAFT, Steering Gear & Spline Yellow A 1 TOWER (Was A) CAPSCREW, Hex Washer Head, Taptite, 5/6-18 x 5/8 Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 11 Manual No

13 Frame & Front Axle Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 12 LT-200 SERIES

14 Frame & Front Axle Group Item Part No Qty Description CAP, Hub, 1.48 ID x.62 Long RING, Klipring, 3/4 Dia WASHER, 3/4 x 1-5/8 OD x 1/16 Thick AXLE, Front FITTING, Lube,.250 Drive,.25 Shank Ball Chk Yel BUSHING, Axle Pivot HOOK, Mower, Hitch CAPSCREW, Hex, Whiz Lock, 7/16-14 x 1-1/ PLATE, Axle Support NUT, Hex Flange, Two Way, 5/ NUT, Hex Flange, Whiz Lock, 5/ CAPSCREW, Hex Head, 3/8-16 x 1-1/4, G BUSHING, 3/8 ID x 5/8 OD x 9/16 Long A 1 TIE ROD, Flat (Early Version) TIE ROD, Flat (Late Version) SM03SM 2 WASHER, 5/8 (Late Version) A 1 WHEEL SPINDLE ASSEMBLY, R.H NUT, Hex Flange, Two Way, Locking, 3/ WHEEL SPINDLE ASSEMBLY, L.H. (Early Version) WHEEL SPINDLE ASSEMBLY, L.H. (Late Version) A 1 FRAME (Was ) SUPPORT, Front Footrest, R.H A 1 SUPPORT, PORT, Rear Frame (Was or ) CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 5/ CAPSCREW, Hex, Whiz Lock, 5/16-18 x 3/ SUPPORT, Front Footrest, L.H. (Was ) WASHER, 5/8 x 1-3/4 OD CAPSCREW, Hex Head, 5/8-11 x 3-1/4, G LINK, Drag (with Ball Joint), 3/8 (Early Version) LINK, Drag (with Bearing), 5/16 (Late Version) NUT, Hex, Nylock, 3/8-24 (Early Version) PEDAL ASSEMBLY, Brake A 1 LATCH, Brake Lock BOLT, Shoulder, 5/16-18 x 15/32, G SPACER, Pivot, 11/32 ID 1-3/4 OD PEDAL ASSEMBLY, Forward A 1 PEDAL, Reverse BOLT, Carriage, 5/16-18 x 1-1/4, G SPACER, Foot Pedal ACTUATOR, RMO Switch BRACKET, Pedal Pivot PLATE, Bearing SUPPORT, Battery LIFT SHAFT ASSEMBLY Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 13 Manual No

15 Frame & Front Axle Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 14 LT-200 SERIES

16 Item Part No Qty Description BRACKET, Sector Support GEAR, Steering (Early Version) GEAR, Steering, 26 Teeth (Late Version) SPACER, Sector Gear, 3/8 ID x 1-1/4 OD CAPSCREW, Hex, Whiz Lock, 3/8-16 x NUT, Hex Flange, Two-Way Lock, 3/8-16 (Was ) SUPPORT, Transmission CAPSCREW, Hex Head, 5/16-18 x 1-1/4 (Late Version) WASHER, 5/16 Flat (.341 I.D. x.87 O.D. X.06 Thick) Black (Late Version) NUT, Hex Flange Two-Way Lock, 5/16-18 (Late Version) Frame & Front Axle Group Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 15 Manual No

17 Controls Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 16 LT-200 SERIES

18 Controls Group Item Part No Qty Description PAD, Foot Pedal Reverse SPACER, Pivot Powdered Metal NUT, Hex, Flange Whiz Lock, 5/ ROD, Cruise Latch, 16.97LG (Was ) CLIP, Linkage, Black ROD, Parking Brake, LG Yellow BOLT, Carriage, 3/8-16 x 1-1/ A 1 BRACKET, Idler 7GA SPRING, Extension LG Black PULLEY, 3 OD Plastic NUT, Hex Flange, 3/8-16 ESNA BOLT, Carriage, 5/16-18 x PULLEY, Idler SPRING, Extension PIN, Cotter 3/32 x 3/ ROD, Brake, 15.1 LG SPRING, Extension LG Black PEDAL, Brake Rubber PIN, Quick ROD, Brake Return, LG ROD, Cruise Latch, 2.83 LG SPRING, Tension, Clutch LATCH, Cruise Powdered Metal BOLT, Shoulder 5/16-18 G PAD, Foot Pedal Forward Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 17 Manual No

19 Engine Group - 18HP, 20HP & 22HP Briggs & Stratton Manual No ELECTRIC CLUTCH HYDRO DRIVE 18 LT-200 SERIES

20 Engine Group - 18HP, 20HP & 22HP Briggs & Stratton Item Part No Qty Description 1 31Q B1 1 * ENGINE, 18.5HP Briggs & Stratton Single Intek: 31Q B1 1 31P B1 1 * ENGINE, 18.5HP Briggs & Stratton Single Intek: 31P B1 (Used on Models , , & ) 1 40G E1 1 * ENGINE, 20HP Briggs & Stratton Twin Intek: 40G E1 (Used on Models , , & ) 1 44K E1 1 * ENGINE, 22HP Briggs & Stratton Twin Intek: 44K E1 (Used on Model ) B1 1 * ENGINE, 22HP Briggs & Stratton Twin Intek: B1 (Used on Models & ) B1 1 * ENGINE, 22HP Briggs & Stratton Twin Intek: B1 (Used on Model ) B1 1 * ENGINE, 22HP Briggs & Stratton Twin Intek: B1 (Used on Model ) VALVE, Shut Off Oil Drain SEAL, Short SEAL, Long (B&S Single) A 1 SHIELD, Heat SCREW, Hex Washer Head Taptite 5/16-18 x 5/ A7997A 1 SHIELD, Heat (B&S Twin) MUFFLER (B&S Twin) A 1 BRACKET, Muffler Mount PIPE, Exhaust R.H. (B&S Twin) PIPE, Exhaust L.H. (B&S Twin) A 1 SHIELD, Heat MUFFLER PIPE, Exhaust (B&S Single) SCREW, Hex Washer Head Taptite 1/4-20 x 1/ CLIP, Speed ed Wire CONTROL, Throttle Double (B&S Single) CONTROL, Throttle Double (B&S Twin) CONTROL, Throttle, Choke-A-Matic (Models , & only) CLAMP, Hose HOSE, Fuel CLIP, Hose SCREW, Hex Washer Head Taptite 3/8-16 x 1 (B&S Single) LOCKWASHER, External Tooth 3/ WASHER, 3/ PULLEY & HUB ASSEMBLY, Engine TIE, Self Locking RETAINER, Clutch CLUTCH, Electric OGURA WASHER, Hex LOCKWASHER, Spring CAPSCREW, Hex Head 7/16-20 x 3-1/2 G GASKET, Exhaust SCREW, Hex Washer Head Taptite 3/8-16 x 1-1/4 (Qty. 1 used on 18.5HP) CAPSCREW, Hex Socket Head 5/16-18 x 3/4 G LOCKWASHER, Spring 5/ A 1 SUPPORT, Muffler, Hood Footnotes: Note* To verify your specific engine model, please reference the ID Tag located on your engine. See your local Briggs & Stratton distributor for parts and service. ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 19 Manual No

21 Engine Group - 18HP, 20HP & 22HP Briggs & Stratton Manual No ELECTRIC CLUTCH HYDRO DRIVE 20 LT-200 SERIES

22 Engine Group - 18HP, 20HP & 22HP Briggs & Stratton Item Part No Qty Description PIVOT, Hood BOLT, Carriage, 5/16-18 x NUT, Hex Flange Whizlock, 5/16-18 Footnotes: Note* To verify your specific engine model, please reference the ID Tag located on your engine. See your local Briggs & Stratton distributor for parts and service. ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 21 Manual No

23 Transmission Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 22 LT-200 SERIES

24 Transmission Group Item Part No Qty Description CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/ ROD, Bypass, LG PIN, Quick NUT, Hex Flange, ESNA, 5/ TRANSMISSION ASSEMBLY, K46BP TRANSMISSION ASSEMBLY, K46BL (Used with 22" Tire Models) SCREW, Hex Head Flange Lock, 5/16-18 x 2-1/ NUT, Hex Flange, ESNA, 5/ SPACER V-BELT, Drive Belt, Aramid/Kevlar 89.25" EL HA A 1 ARM, Control WASHER, Flat, 5/ CAPSCREW, Hex Head, 5/16-18 x A 1 STRAP, Torque WASHER, Plain, 5/ CAPSCREW, Hex Head, 5/16-18 x 1-3/ NUT, Hex, Flange Whizlock, 5/16-18 Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 23 Manual No

25 Transmission SERVICE PARTS - Tuff Torq K46BP Manual No ELECTRIC CLUTCH HYDRO DRIVE 24 LT-200 SERIES

26 Item Part No Qty Description *TRANSMISSION, Tuff Torq K46BP *KIT, Upper Case *LOWER CASE VENT VALVE MAGNET *MAGNET HOLDER *PUMP SHAFT/BEARING KIT *SPRING BYPASS SHAFT A LEVER, Bypass RING, Snap, SEALING CAP RING, Snap, C SEAL WASHER *KIT, Drain Bolt *SCREW, Tapping, 8 * SCREW, Tapping, 8 * *CENTER CASE E W/BALL IDS SERVICE KIT PIN, 3 * *FILTER BOLT, 10 * *IDS VALVE IDS SPRING *BALL, 3/ *KIT, Cylinder Block (Pump) SPRING PUMP SHAFT E-RING BEARING, 6202C MOTOR HOUSING *THRUST BEARING KIT, Cylinder Block WASHER, 12 * 24 * MOTOR SHAFT RING, Snap, S BRAKE DISC/MOTOR GEAR (11T) *BEARING, 6202 RSR C THRUST METAL *SWASH PLATE CMP THRUST BEARING K *CONTROL SHAFT *FULCRUM *SPRING, Torsion *CONTROL ARM A Transmission SERVICE PARTS - Tuff Torq K46BP Footnotes: *Note: See your local authorized dealership for Tuff Torq parts and warranty or contact Tuff Torq at (U.S ; Int'l ) ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 25 Manual No

27 Transmission SERVICE PARTS - Tuff Torq K46BP Manual No ELECTRIC CLUTCH HYDRO DRIVE 26 LT-200 SERIES

28 Item Part No Qty Description CONTROL LEVER C *JERKY PLATE WASHER, COTTER PIN, 1/8 * 3/ SPRING PIN 6 * ROLL PIN 6 * NUT *KIT, Differential Gear *FINAL GEAR (54T) *FINAL PINION COLLAR *REDUCTION SHAFT WASHER, 12 * 32 * *REDUCTION GEAR (37T) *FINAL PINION GEAR (10T) AXLE SHAFT, Left AXLE SHAFT, Right *THRUST WASHER RING SEAL 19 * 32 * BUSHING, 19 * *BUSHING, BRAKE SHOE BRAKE LEVER *BRAKE SHAFT *BRAKE RETURN SPRING BRAKE ACTUATOR ATOR SPRING PIN 5 * SPRING PIN 4 * PULLEY D FAN, White WASHER, Wave SNAP RING *SPRING PIN 3.0A * *SPRING PIN 3.0A * *SEALANT K46 & T40 SEAL KIT (ALL MODELS) *REPAIR KIT K46 Transmission SERVICE PARTS - Tuff Torq K46BP Footnotes: *Note: See your local authorized dealership for Tuff Torq parts and warranty or contact Tuff Torq at (U.S ; Int'l ) ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 27 Manual No

29 Transmission SERVICE PARTS - Tuff Torq K46BL Manual No ELECTRIC CLUTCH HYDRO DRIVE 28 LT-200 SERIES

30 Item Part No Qty Description * TRANSMISSION, Tuff Torq K46BL KIT, Upper Case LOWER CASE VENT VALVE MAGNET *MAGNET HOLDER *KIT, Pump Shaft/Bearing *SPRING BYPASS SHAFT A LEVER, Bypass RING, Snap, SEALING CAP RING, Snap, C SEAL WASHER KIT, Drain Bolt RING, 1A P10A SEAL TC *SCREW, Tapping, 8 * SCREW, Tapping, 8 * *CENTER CASE K W/ 1.2 FILTER IDS KIT PIN 3 * FILTER BOLT, 10 * *IDS VALVE *IDS SPRING *IDS FILTER *KIT, Cylinder Block (Pump) *SPRING PUMP SHAFT E-RING BEARING, 6202C MOTOR HOUSING *THRUST BEARING KIT, Cylinder Block WASHER, 12 * 24 * MOTOR SHAFT RING, Snap, S BRAKE DISC/MOTOR GEAR (10T) *BEARING, 6202 RSR C THRUST METAL *SWASH PLATE CMP THRUST BEARING K *CONTROL SHAFT *FULCRUM Transmission SERVICE PARTS - Tuff Torq K46BL Footnotes: *Note: See your local authorized dealership for Tuff Torq parts and warranty or contact Tuff Torq at (U.S ; Int'l ) ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 29 Manual No

31 Transmission SERVICE PARTS - Tuff Torq K46BL Manual No ELECTRIC CLUTCH HYDRO DRIVE 30 LT-200 SERIES

32 Item Part No Qty Description *SPRING, Torsion *CONTROL ARM A CONTROL LEVER C *JERKY PLATE WASHER, COTTER PIN, 1/8 * 3/ SPRING PIN 6 * ROLL PIN 6 * O-RING 1A P NUT *KIT, Diff Gear *FINAL GEAR (54T) *FINAL PINION COLLAR *REDUCTION SHAFT WASHER, 12 * 32 * REDUCTION GEAR (38T) *FINAL PINION GEAR (10T) AXLE SHAFT, Left AXLE SHAFT, Right THRUST WASHER RING SEAL 19 * 32 * BUSHING, 19 * *BUSHING, BRAKE SHOE BRAKE LEVER *BRAKE SHAFT *SPRING, Brake Return BRAKE ACTUATOR SPRING PIN 5 * O-RING 1A P SPRING PIN 4 * PULLEY D FAN, White WASHER, Wave RING, Snap *SPRING PIN 3.0A * OIL SEAL 16 * 22 * *SPRING PIN 3.0A * *SEALANT K46 & T40 SEAL KIT (ALL MODELS) *REPAIR KIT K46 Transmission SERVICE PARTS - Tuff Torq K46BL Footnotes: *Note: See your local authorized dealership for Tuff Torq parts and warranty or contact Tuff Torq at (U.S ; Int'l ) ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 31 Manual No

33 Lift Group - Manual Manual No ELECTRIC CLUTCH HYDRO DRIVE 32 LT-200 SERIES

34 Item Part No Qty Description DECAL, Height Of Cut BOLT, Carriage, 1/4-20 x 5/8 G A 1 QUADRANT, Lift Height NUT, Hex Flange Whiz, 1/ GRIP ROD, Lift Handle E-Coat, 17.7 LG CAPSCREW, Hex Head, 5/16-18 x WASHER, Plain, 21/64 x 1-1/ SPRING, Torsion, 2.12 LG Black A 1 CLEVIS, Lift SPACER, Pivot Powdered Metal NUT, Hex, Flange Whizlock, 5/ A 1 PLATE, Bearing SCREW, Taptite, 5/16-18 x 5/ CLIP, Spring WASHER, 1/ PIN, Threaded Shoulder A 2 ARM, Lift Rear 10GA NUT, Hex, Flange, Whizlock, 5/16-18 x 1/ DECAL, CAUTION! Pinch Point BOLT, Shoulder NUT, Hex Flange, ESNA, 3/ SPACER (Used on 38" & 42" Mower Decks) SPACER (Used on 44" & 50" Mower Decks) TRUNNION, Powdered Metal ROD, Lower Lift, LG A 1 SHAFT ASSEMBLY, Lift ROD, Lift, 5.43 LG SPRING, Extension 5.10 LG Black (Used on 44" & 50" Mower Decks) Lift Group - Manual Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 33 Manual No

35 38" & 42" Mower Deck - Housing, Arbors & Blades Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 34 LT-200 SERIES

36 38" & 42" Mower Deck - Housing, Arbors & Blades Group Item Part No Qty Description NUT, Push, 3/ ROD, Deflector BOLT, Carriage, 5/16-18 x 3/ A 1 BRACKET, Hinge 9GA SPRING, Torsion NUT, Hex, Flange Whizlock, 5/ DEFLECTOR & SUPPORT ASSEMBLY, Chute Riveted A 2 PLATE, Rear (38" Only) A 2 PLATE, Rear (42" Only) PULLEY, 5.25 (38" Only) PULLEY, 5.50 (42" Only) PULLEY, 7.00 (42" Only) (CE/Export) A 1 UPSTOP, "L" 10GA BEARING, Upper NUT, Hex Lock, ESNA Light, 5/8-18, Thin SPACER, Pulley, 38" Deck RETAINING RING, Extension, 1-3/ SCREW, Hex, Washer Head, Taptite, 3/8-16 x 3/ A 1 UPSTOP, "L" 10GA (38" Only) HOUSING, 42" (42" Only) HOUSING, 38" (38" Only) FITTING, Grease SHAFT, Spindle, 38" Deck Z 1 TUBE & PLATE ASSEMBLY, Spindle WASHER, Belleville NUT, Hex 9/ A 2 BLADE, Mower 42" (42" Only) BLADE, Mower 38" (38" Only) WASHER, Spindle Blade Powdered Metal A 2 COVER, Spindle (38" Only) (CE/Export) A 3 SUPPORT, Spindle Cover (38" Only) (CE/Export) SCREW, Tapitite 1/4-20 x 1/2 (38" Only) (CE/Export) A 2 COVER, Pulley (42" Only) (CE/Export) A 2 SCREW, Taptite 5/16-20 x 1/2 (42" Only) (CE/Export) LOCKWASHER, Interior Tooth 5/8 (42" Only) (CE/Export) A 1 GUARD, Pulley (38" - France Only) A 1 GUARD, Belt (38" - France Only) A 2 GUARD, Belt (38" - France Only) RIVET, Pop (38" - France Only) Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 35 Manual No

37 38" & 42" Mower Deck - Belt, Idler Arm & Hitch Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 36 LT-200 SERIES

38 38" & 42" Mower Deck - Belt, Idler Arm & Hitch Group Item Part No Qty Description A 1 GUARD, Spring (Used on Kevlar Belts) A 1 GUARD, Spring (Used on A-Wedge Aramid Belts) CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x WASHER, Plain, 13/32 x 1-1/2 x 1/ A 1 ARM SPACER, ID x 1-1/2 OD x 1.04 LG Powdered Metal CAPSCREW, Hex Head, 3/8-16 x 2-1/ WASHER, 3/ IDLER, Flat NUT, Hex, Flange Whizlock, 5/ CAPSCREW, Hex Head, 3/8-16 X 1-3/ A 1 SUPPORT, Idler NUT, Whizlock, 3/ SPRING, Extension LG Black NUT, 3/8-16, Hex Flange MAC Locking Large, Black BOLT, Carriage, 5/16-18 x 3/ V-BELT, LG Kevlar (Used on 38" Domestic Models) V-BELT, LG Kevlar (Used on 42" Domestic Models) V-BELT, LG A-Wedge Aramid (Used on 38" CE/Export Models) V-BELT, LG A-Wedge Aramid (Used on 42" CE/Export Models) Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 37 Manual No

39 38" & 42" Mower Deck - Height Adjustment & Roller Bar Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 38 LT-200 SERIES

40 Item Part No Qty Description BOLT, Rear Wheel (42" Only) WASHER, 1/2 (42" Only) WHEEL, Gauge (42" Only) NUT, Hex, Flange Whizlock, 5/16-18 (38" Only) NUT, Hex, Flange Whizlock, 5/16-18 (42" Only) A 1 SUPPORT, Gauge Wheel RH 7 GA (42" Only) NUT, Hex Flange, 3/8-16 ESNA (42" Only) BOLT, Carriage, 5/16-18 x 3/4 (38" Only) BOLT, Carriage, 5/16-18 x 3/4 (42" Only) D 1 SUPPORT, Mower RH D 1 BRACE, Mower Support (38" Only) D 1 SUPPORT, Mower LH A 1 SUPPORT, Gauge Wheel LH 7 GA (42" Only) D 1 HITCH, Front 38" Mower D 1 HITCH, Front 42" Mower PIN, Hitch SPACER,.532 ID x 3/4 OD x 1-1/4 LG Yellow NUT, ESNA, Lock, 1/2-13 (Thin) CLIP, Pin, Safety A 1 HANGER, Front Mower ROD, Bail Mowers Yellow 38" & 42" Mower Deck - Height Adjustment & Roller Bar Group Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 39 Manual No

41 French Guard Group - 38" Manual No ELECTRIC CLUTCH HYDRO DRIVE 40 LT-200 SERIES

42 French Guard Group - 38" Item Part No Qty Description BM 1 GUARD, Clutch BM 1 SUPPORT, Guard BM 3 GUARD, Rear Pulley BM 2 GUARD, Rear NUT, Hex Flange, 5/ CAPSCREW, Dog Point, SEMS, 1/4-20 x 3/ CAPSCREW, Hex Head, 1/4-20 x 1/ NUT, Hex Lock ESNA, 1/ WASHER, 1/ CAPSCREW, Hex, 5/16-18 x 3/ CAPSCREW, Hex Head, Flange Whiz Lock, 5/16-18 x 3/4 Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 41 Manual No

43 44" Mower Deck - Housing, Arbors & Blades Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 42 LT-200 SERIES

44 Item Part No Qty Description NUT, Hex, Flange, 9/ WASHER, Belleville PULLEY, RH Arbor & LH Arbor, 4-1/ HUB, Pulley, RH (Middle) SPACER A 3 COVER, Arbor Housing BEARING GASKET, Foam A 3 HOUSING, Arbor Bottom, w/lube Fitting FITTING, Grease HUB, Adapter, LH A 1 COVER, Arbor CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/ WASHER SHAFT, Arbor SHIELD, Grass, Lower BLADE, WASHER, Hex WASHER, Spring CAPSCREW, Hex Head, 7/16-14 x 1-1/ BOLT, Carriage, 5/16-18 x 3/ BOLT, Carriage, 5/16-18 x 3/4 (CE Only) A 1 BAFFLE, Anti-Blowout NUT, Hex, Flange Whizlock, 5/ NUT, Hex, Flange Whizlock, 5/ A 1 BAFFLE, Blowout out LH, 44 (CE Only) A 1 BAFFLE, Blowout RH, 44 (CE Only) SHAFT, Arbor, RH CARRIAGE BOLT, 1/4-20 x 1, Black COVER, Arbor, RH NUT, Push On WASHER, Plain, 1/4 (6 Total for Export) CLAMP NUT, Hex Lock, ESNA, 1/ WASHER, Flat, 5/ DEFLECTOR, Plastic SPRING A 1 ROD, Deflector, Front D 1 HOUSING ASSEMBLY, 44 Mower Frame Mount PLUG, Plastic (Not Shown) 44" Mower Deck - Housing, Arbors & Blades Group Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 43 Manual No

45 44" & 50" Mower Deck - Belt, Idler Arm & Hitch Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 44 LT-200 SERIES

46 44" & 50" Mower Deck - Belt, Idler Arm & Hitch Group Item Part No Qty Description NUT, Hex Flange Center Locking, 3/ WASHER, Plain, 13/32 x 1-1/2 x 1/ A 1 ARM, Idler 7GA SPACER CAPSCREW, Hex Head, 3/8-16 x 2-1/ WASHER, 3/ PULLEY ASSEMBLY SPACER NUT, Whizlock, 3/ SPRING, Extension, Idler Arm (44 Mower Deck) SPRING, Extension, Idler Arm (50 Mower Deck) V BELT, Arbor Drive, V BELT, Arbor Drive, 44 (CE Only) V-BELT, Arbor Drive, V-BELT, Arbor Drive, 50 Deck, " LG HA used on CAPSCREW, Hex Head, 3/8-16 x 1-1/4, G8 Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 45 Manual No

47 44" & 50" Mower Deck - Height Adjustment & Roller Bar Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 46 LT-200 SERIES

48 44" & 50" Mower Deck - Height Adjustment & Roller Bar Group Item Part No Qty Description CLIP, Pin, Safety A 1 HANGER, Front Mower NUT, ESNA, Lock, 1/2-13 (Thin) SPACER PIN, Hitch ROD, Bail Mowers Yellow A 2 PLATE, PIVOT Lock 10 GA NUT, Hex, Flange Whizlock, 5/ CAPSCREW, Hex Head, Flange Whiz Lock, 5/16-18 x 3/ NUT, Hex Flange, 3/8-16 ESNA WASHER, 1/ WHEEL, Gauge BOLT, Rear Wheel Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 47 Manual No

49 46" Mower Deck - Housing, Arbor & Blades Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 48 LT-200 SERIES

50 Item Part No Qty Description D 1 HOUSING, 46" Mower HOUSING, Spindle, Cast Alum Mach'd w/ftg BEARING, Ball, 20mm SHAFT, Spindle, 20mm DIA mm LG SHIELD, Arbor, 2" OD SPACER, Bearing RING, Self Locking CAPSCREW, Hex Washer Head Taptite, 5/16-18 x BLADE, Mower, 16.13" LG WASHER, Spring, ID x 1.75 OD x.156 Th CAPSCREW, Hex Head, 7/16-14 x 1, G PULLEY, Split, 4.6 OD SPACER, Lower Drive SPACER, Pulley LOCKWSHER, Spring, 7/ DEFLECTOR, Discharge A 1 PIVOT, Hinge BOLT, Carriage, Short Neck, 5/16-18 x 3/4, G NUT, Hex Flange, Whiz Lock, 5/ SPRING, Torsion, Deflector A 1 SHIELD, Hinge ROD, Deflector NUT, Push, 5/ CAPSCREW, Hex Head, 7/16-14 x 1-3/4, G A 1 BRACKET, Belt Cover, Front A 1 BRACKET, Belt Cover, Rear COVER, Belt, RH COVER, Belt, LH CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/ A 1 BAFFLE, Pinchoff CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 1-1/ CONNECTOR, Washout Port ADAPTER, Washout Port 46" Mower Deck - Housing, Arbor & Blades Group Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 49 Manual No

51 46" Mower Deck - Clutch Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 50 LT-200 SERIES

52 46" Mower Deck - Clutch Group Item Part No Qty Description V-BELT, HA LG A-WEDGE ARAMID SPRING, Extension, 5-1/4" PULLEY, Idler, 46, 52" Mowers CAPSCREW, Hex Head, 3/8-16 x 2-1/2, G WASHER, 3/8 x 1 OD NUT, Hex Flange, Whiz Lock, 3/ NUT, Hex Flange, Mac Lock, Large, 3/ A 1 ARM, Idler SPACER, ID x 1.50 OD x 1.04 LG CAPSCREW, Hex Head, 3/8-16 x 2, G WASHER, 3/8 x 1-1/2 OD NUT, Center Lock, 3/8-16 Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 51 Manual No

53 46" Mower Deck - Height Adjustment Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 52 LT-200 SERIES

54 Item Part No Qty Description A 1 SUPPORT, Rear Cross A 1 BRACKET, Rear Mower Pickup A 1 BRACKET, Rear Mower Pickup CAPSCREW, Hex Washer Head, Taptite, 5/16-18x A 1 HITCH, Front ROD, Front Bail A 1 HANGER, Front Mower ROD, Latch, 1/2 x 9" Long, 42" RETAINER, Pin Spring SPACER, 1/2 ID x 7/8 OD x 1-3/16 Long NUT, Hex Lock, ESNA, 1/ A 2 BRACKET, Gauge, Wheel, R.H A 2 BRACKET, Gauge, Wheel, L.H BOLT, Carriage, 5/16-18 x 7/8, G NUT, Hex Flange, Whiz Lock, 5/ WHEEL, Gauge, 5" Dia BOLT, Shoulder, 3/8-16 X 3-13/ WASHER, 1/2 x 1 OD NUT, Hex Flange, ESNA, 3/ A 1 UP STOP NUT, Hex Jam, 1/ CLIP, Hair Pin, 1-5/ BOLT, Carriage 5/16-18X.750 G5 Blk 46" Mower Deck - Height Adjustment Group Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 53 Manual No

55 50" Mower Deck - Housing, Arbors & Blades Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 54 LT-200 SERIES

56 Item Part No Qty Description NUT, Hex Flange 9/ PULLEY HUB A 3 HOUSING, Arbor Top BEARING, Ball 11/16 x 9/16 x 15/ SPACER, Powdered Metal GASKET A 3 HOUSING, Arbor Bottom w/lube Fitting SCREW, Hex Washer Head Taptite 5/16-18 x 3/ A 1 COVER, Arbor D 1 HOUSING ASSEMBLY, 50" (Red) CARRIAGE BOLT, 5/16-18 x 3/4 G A 1 BAFFLE, Blowout, Short NUT, Hex Flange 5/16-18, Whiz Lock Small WASHER, Cup SHAFT, Arbor SHIELD, Grass Lower Arbor, Heat Treated BLADE, Mower 18.12" LG (Was ) WASHER, Hex 11/16 x WASHER, Spring CAPSCREW, Hex Head 7/16-14 x 1-1/4 G SHAFT, Arbor CARRIAGE RIAGE BOLT, 1/4-20 x 1 G COVER, Arbor NUT, Push for 1/4 Diameter Thread WASHER, 1/ CLAMP, Wire WASHER, 5/ SPRING, Torsion, Chute NUT, Hex Lock ESNA Light 1/ DEFLECTOR ROD, Deflector HUB PLUG WASHER, Bellville SCREW, Hex Head Serange Flange Taptite 5/16-18 x CARRIAGE BOLT, 1/4-20 x 1-1/2 G5 50" Mower Deck - Housing, Arbors & Blades Group Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 55 Manual No

57 Decals Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 56 LT-200 SERIES

58 Decals Group Item Part No Qty Description DECAL, Snapper, LH Hood Stripe DECAL, Snapper, LH Hood Stripe (Model Only) DECAL, Snapper, RH Hood Stripe DECAL, Snapper, RH Hood Stripe (Model Only) DECAL, Ignition Switch Symbol, White/Black DECAL, Steering Wheel Icon DECAL, Steering Wheel Icon (Model Only) DECAL, Height of Cut Not Used on 40" Mower DECAL, Snapper Rear Stripe, Silver/ 8.5LG DECAL, Snapper Rear (Model Only) DECAL, Transmission Tow/ Release Lever DECAL, Fuel Level DECAL, Tunnel DECAL, Safety Instructions (CE/Export) DECAL, Tunnel (France Models Only) DECAL, Safety Instructions (Used only on ACS models)(ce/export) DECAL, Belts,Blades (France Models Only) DECAL, Belts, Blades * DECAL, ID Plate DECAL, LT HP DECAL, LT200 20HP DECAL, LT200 22HP DECAL, Danger, Chute in Place Not Used on 40" Mower DECAL, Pinch Point Not Used on 40" Mower DECAL, Danger, Hand Under Deck Not Used on 40" Mower * DECAL, OPEI DECAL, 38" DECAL, 42" DECAL, 44" DECAL, 46" DECAL, 50" DECAL, Hand Under Deck (CE/Export) Footnotes: Note* Not a serviceable part. ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 57 Manual No

59 Electrical Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 58 LT-200 SERIES

60 Electrical Group Item Part No Qty Description SWITCH ASSEMBLY, Ignition, 6-Pole (Includes Ref. 2, 3, 4 & 5) WASHER, 5/ LOCKWASHER, Internal Tooth, 5/ NUT, Hex, Flange, 5/ COVER, Ignition IGNITION KEY (Set of 2) SWITCH, Headlights, 2 Terminal PLUG, Hole, Square PLUG, Hour Meter (Kohler and B&S Single) METER, Hour, LCD (B&S V-Twin Only) WASHER, Plain, 1/4 (6 Total for Export) NUT, Wing, 1/ BOLT, Carriage, 1/4-20 x 7/ NUT, Push On HOLD DOWN, Battery SWITCH, Push Button (NC) TIE, Self Locking 7-5/ OUTLET, 12 Volt DC Power PLUG, Hole Models W/O 12V Adapter SWITCH, Push Button (NO/NC) A 1 SUPPORT, Battery 12 GA SCREW, Taptite, 5/16-18 x 5/ HEADLIGHT ASSEMBLY (Includes Ref. Nos. 24, 25, 26 & 27) SOCKET ASSEMBLY BULB, V 21CP REFLECTOR, Headlight LENS, Headlight CLIP, Speed Wire NUT, Hex, Flange, 1/ COVER, Terminal HARNESS, Wiring (Use on models with 12 Volt Outlet) HARNESS, Wiring (Use on models without 12 Volt Outlet) CABLE, Solenoid to Starter SOLENOID SCREW, Taptite, 1/4-20 x 1/ LOCKWASHER, External Tooth, 5/ NUT, Hex, 5/16-24 NF CABLE, #6 x 10 Long, with 2 Ring Terminals, Battery to Solenoid NUT, Hex, Flange Whizlock, 5/ A 1 SUPPORT, RMO Switch BOLT, Carriage, 5/16-18 x 3/ BOOT, Insulator BATTERY, 12 Volt, 230CCA BATTERY, 12 Volt, 230CCA (CE/Export) Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 59 Manual No

61 Electrical Group Manual No ELECTRIC CLUTCH HYDRO DRIVE 60 LT-200 SERIES

62 Electrical Group Item Part No Qty Description SWITCH, Push Button (NO), Reverse Pedal NUT, Hex, Full, 1/ LOCKWASHER, 1/ WASHER, 1/4 I.D CABLE, Battery to Ground CAPSCREW, Hex Head, 1/4-20 x 3/ FUSE, Wiring Harness SWITCH, RMO Module Only KEY, w/hang Tag for RMO Module SWITCH, PTO, Push/Pull Symbols Footnotes: ELECTRIC CLUTCH HYDRO DRIVE LT-200 SERIES 61 Manual No

63

64

65 Parts Manual for ELECTRIC CLUTCH HYDRO DRIVE RMO & ACS TRACTORS LT-200 SERIES IT IS THE POLICY OF BRIGGS & STRATTON CORP TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, U.S.A Copyright 2012 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved Manual No Revision: C 1/12/2012

66

67 YVAN BÉAL - ZAC des Ribes - 27 rue des frères Montgolfier - CS Aubière Cedex Tél. : / Fax : / info@yvanbeal.fr / Web :