Regent / 2500 Series Lawn Tractors & Mower Decks

Size: px

Start display at page:

Download "Regent / 2500 Series Lawn Tractors & Mower Decks"

Stephanie Hill
5 years ago
Views:

1 Parts Manual 1HP Tractors Regent / 00 Series Lawn Tractors & Mower Decks Mfg. No. Description 100 Regent, 1HP Hydro 10 H, 1HP Hydro 11 Regent, 1HP Hydro 11 Regent, 1HP Hydro (CE) 1 H, 1HP Hydro Mower Decks Mfg. No. Description 1 " Mower Deck 10 " Mower Deck 1 0" Mower Deck (CE) 1 " Mower Deck 11 " Mower Deck Rev. 0/00

3 Table Of Contents TRACTOR / MOWER DECK COMPONENTS PAGES Frame Group... Steering Group... Engine & Electric Clutch - 1HP Honda... Transmission Group... 1 Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle... 1 Controls Group... 0 Electrical Group... Hood, Dash & Fuel Tank Group... Seat & Seat Deck Group... Wheels & Tires Group... Decals Group - Brand & Model... 0 Decals Group - Safety & Common... " Mower Deck - Belt, Idler Arm & Hitch Group... " Mower Deck - Height Adjustment & Roller Bar... " Mower Deck - Housing, Arbors & Blades Group " Mower Deck - Belt, Idler Arm & Hitch Group... 0" Mower Deck - Height Adjustment & Roller Bar... 0" Mower Deck - Housing, Arbors & Blades... 0 " Mower Deck - Belt, Idler Arm & Hitch Group... " Mower Deck - Height Adjustment & Roller Bar... " Mower Deck - Housing, Arbors & Blades... 0 Torque Specification Chart... Inside Back Cover

4 Frame Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Insert Must Face Out Regent 11 - Regent 10 - H 11 - Regent 1 - H

5 Frame Group REF NO PART NO. QTY. DESCRIPTION FRAME ASSEMBLY PLUG, Hole PAD, Footrest RH PAD, Footrest LH 1 1 FASTENER, Panel 1 NUT, Speed / CAPSCREW, Hex Head Flange Lock, /1-1 x / WRAPPER ASSEMBLY, Hydro 10 CAPSCREW, Hex Head, 1/-1 x 1-1/ 111 WASHER, 1/ 11 1 SPACER 1 10 NUT, Hex Head, 1/ CARRIER ASSEMBLY, Hydro SPACER BAR, Torsion NUT, Hex Head Aluminum Insert, / WASHER, / 1 10 BUSHING, /, Nylon SPACER "J" HOOK, Hitch CAPSCREW, Hex Head, /-1 x, G Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H

6 Steering Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Torque to - ft/lbs (- Nm) Torque to 1 ft/lbs ( Nm) Torque to - ft/lbs (- Nm) Torque to - ft/lbs (- Nm) 1 1 Note: See Wheels & Tires Group Regent 11 - Regent 10 - H 11 - Regent 1 - H

7 Steering Group REF NO PART NO. QTY. DESCRIPTION STEERING WHEEL 11 1 CAP 10 1 TUBE PIN, Spring SHAFT & PINION ASSEMBLY 110 CARRIAGE BOLT, /-1 x PLATE, Mounting 1 NUT, Hex Head Whiz Lock, / BUSHING 1011 WASHER NUT, Hex Lock, / WASHER BUSHING RING, Clipring Extension CAPSCREW, Hex Head, /-1 x 1-1/ WASHER STEERING GEAR ASSEMBLY LINK, 1." Long 1 10 NUT, Hex Flange Lock, / CARRIAGE BOLT, /1-1 x ARM & SPACER ASSEMBLYMY, LH Splined 1010 WASHER PIN, Cotter 11 SPINDLE & CUP ASSEMBLY 111 SPACER 1 1 ROD 11 1 ARM & SPACER ASSEMBLY, RH 1 1 CAPSCREW, Hex Head, Taptite, /1-1 x / 10 CARRIAGE BOLT, /-1 x 1-1/ CAPSCREW, Hex Head, /1-1 x 1-1/ SPACER 1 1 SPACER 10 1 NUT, Hex Flange Lock, /1-1 Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H

8 Engine & Electric Clutch - 1HP Honda NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 Torque to -1 in. lbs To like colored wires on engine Ground Wires 1 0 Apply anti-seize to crankshaft Apply pipe sealant to tapered threads Torque to 1- ft. lbs. 1 0 Torque to -0 ft. lbs. 1 Secures Carb. vent hose. Tie cluch wire to spring away from belt and pulley Regent 11 - Regent 10 - H 11 - Regent 1 - H

9 Engine & Electric Clutch - 1HP Honda REF NO PART NO. QTY. DESCRIPTION DUCT, Muffler 10 1 PIPE, Manifold, RH * GASKET, Manifold 10 NUT, Hex, MM CAPSCREW, Hex Head Taptite, MM-1.0 x 1MM 1 1 SHIELD, Manifold, RH 10 1 FUEL FILTER 011 CLAMP, Hose 11 1 HOSE, Fuel * 1 VOLTAGE REGULATOR BRACKET, Voltage 1 * 1 ENGINE, 1HP Honda V-Twin GXV0, PXA1 1 0 CAPSCREW, Hex Head Taptite, MM-1.0 x 0MM CLUTCH, Electric Ogura 1 1 CONTROL, Choke LOCKWASHER, Internal Tooth, / KNOB, Slot 1 10 CAPSCREW, Hex Head Taptite,1/-1 x / CONTROL, Throttle STOP, Belt CLAMP 0 1 VALVE, Shut Off 00 1 KEY LOCKWASHER 01 1 CAPSCREW, Hex Head, /1-0 x 11 1 TIE, Self Locking 1 1 PULLEY & HUB ASSEMBLY 0 CAPSCREW, Hex Head Taptite, /-1 x 1-1/ 01 CAPSCREW, Hex Head Taptite, /-1 x 0 1 WASHER, Hex STOP, Belt 1 1 WASHER 0 LOCKWASHER, External Tooth, / 1 1 PIPE, Manifold, LH 1 1 MUFFLER 1 NUT, Speed, / DUCT, Muffler, Lower 1 CAPSCREW, Hex Head Taptite, /1-1 x 1/ 10 CAPSCREW, Hex Head Taptite, /1-1 x 1-1/ 0 PIVOT, Hood Footnotes * See your local Honda dealer/distributor for parts and service Regent 11 - Regent 10 - H 11 - Regent 1 - H

10 Engine & Electric Clutch - 1HP Honda NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 Torque to -1 in. lbs To like colored wires on engine Ground Wires 1 0 Apply anti-seize to crankshaft Apply pipe sealant to tapered threads Torque to 1- ft. lbs. 1 0 Torque to -0 ft. lbs. 1 Secures Carb. vent hose. Tie cluch wire to spring away from belt and pulley Regent 11 - Regent 10 - H 11 - Regent 1 - H

11 Engine & Electric Clutch - 1HP Honda REF NO PART NO. QTY. DESCRIPTION 1 SPACER 101 CAPSCREW, Hex Head Taptite, /1-1 x / 100 WASHER Footnotes * See your local Honda dealer/distributor for parts and service Regent 11 - Regent 10 - H 11 - Regent 1 - H 11

12 Transmission Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. See Frame Group Part of frame. See Engine Group See Wheels & Tires in Miscellaneous Group. See Frame Group Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

13 Transmission Group REF NO PART NO. QTY. DESCRIPTION CARRIAGE BOLT, /1-1 x ROD, Hydro Control 11 1 NUT, Hex Lock ESNA Light, / WASHER, / CAPSCREW, Hex Head Taptite, /1-1 x / 10 1 STOP, Belt 11 NUT, Hex / LOCKWASHER, / PULLEY 10 1 CAPSCREW, Hex Head Flange Lock, /1-1 x 1-/ LOCKWASHER SPLINE COLLAR V-BELT, Drive FAN "E" RING ROD, Hydro Bypass PIN, Cotter TRANSMISSION ASSEMBLY 1 11 NUT, Hex Flange, / KEY, /1 x 1 00 WASHER, / 111 SPACER 10 CAPSCREW, Hex Head, /1-1 x -1/ 11 1 ANCHOR, Torsion Bar, LH 01 CAPSCREW, Hex Washer Head Taptite, /1-1 x -1/ 11 1 CAPSCREW, Hex Head, /1-1 x CAPSCREW, Hex Head, /1-1 x 1-1/ 00 SPACER 11 1 ANCHOR, Torsion Bar, RH PIN, Cotter ROD, Brake 10 1 CAPSCREW, Hex Head, /1-1 x 1-/ Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

14 PLATE OF SMALLER INNER DIA. SHOULD CONTACT PISTONS. SEAL SIDE; OUTER Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle NOTE: Unless noted otherwise, use the standard hardware torque specification chart THICKER PLATE Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

15 Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle REF NO PART NO. QTY. DESCRIPTION SNAP RING 11 1 PULLEY D 11 1 LOCK WASHER 11 SPLINE COLLAR 11 1 FAN 110 RING E PUMP SHAFT 1 1 SEAL TC RING, SNAP C BEARING 0C SEALING CAP K0 MAGNET HOLDER MAGNET VENT VALVE PIN * ARM BRAKE PIN SPRING *1 1 0 O-RING 1A P RETURN SPRING B BUSHING SEAL 1** 10 1 SHAFT BRAKE 10 1 SHOE BRAKE 10 1 ACTUATOR BRAKE 11 1 CENTER CASE E CMP PIN *. 100 BOLT * FILTER K0 SNP WASHER 1** CYLINDER BLOCK BEARING HOUSING 1 1 SHAFT MOTOR 1 RING, SNAP S BEARING 0CU 1 1 MOTOR GEAR 10 WASHER 1** REDUCTION GEAR 1 1 COLLAR, FINAL P FINAL PINION Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

16 PLATE OF SMALLER INNER DIA. SHOULD CONTACT PISTONS. SEAL SIDE; OUTER Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle NOTE: Unless noted otherwise, use the standard hardware torque specification chart THICKER PLATE Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

17 Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle REF NO PART NO. QTY. DESCRIPTION REDUCTION SHAFT 10 1 AXLE SHAFT L 111 BUSHING 1111 THRUST WASHER 1111 RING 1 1 DIFF PINION 1 1 FINAL GEAR 10 1 AXLE SHAFT R 1 SCREW, TAPPING *0 0 1 WASHER, SEAL 1 1 SCREW, CAP *1 1 TAPPING SCREW * 1 1 LOWER HOUSING 1 IDS SPRING 1 BALL /1 1 IDS VALVE SPRING PIN.0A* 1 1 COTTER PIN 1 1 CONTROL SHAFT SP (TORSION CONTROL ARM E 1 1 JERKY PLATE 1 1 FULCRUM (ECCENTRICIT 1 1 CYLINDER BLOCK 10 1 SPRING (PUMP) THRUST PLATE BEARING K THRUST PLATE 10 1 SWASH PLATE CMP THRUST METAL RING 1 SPRING 11 1 OIL SEAL 1** UPPER HOUSING O-RING 1A P1 1 WASHER, 1 1 NUT PIN, ROLL *0 1 1 CONTROL LEVER LEVER BYPASS PIN.0A*0 Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

18 PLATE OF SMALLER INNER DIA. SHOULD CONTACT PISTONS. SEAL SIDE; OUTER Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle NOTE: Unless noted otherwise, use the standard hardware torque specification chart THICKER PLATE Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

19 Transmission SERVICE PARTS - Tuff Torq K-Z Transaxle REF NO PART NO. QTY. DESCRIPTION 1 SPRING PIN *1 1 O-RING 1A PA 11 1 SHAFT (BYPASS) Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

20 Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 1 Connect to Top of Frame Part of Frame See Transmission Group Connect to Lanced Notch in Top of Frame Regent 11 - Regent 10 - H 11 - Regent 1 - H 0

21 Controls Group REF NO PART NO. QTY. DESCRIPTION KNOB 11 1 ROD, Parking Brake 10 1 SPRING, Extension 11 1 LEVER, Parking WASHER, 1/ 111 BUSHING, 1/, Nylon 11 1 CARRIAGE BOLT, /-1 x -1/ 11 1 ARM, Idler PULLEY, Backside, Idler, -1/ OD SPRING, Extension ROD, Brake GUIDE BELT & STUD ASSEMBLY SPACER NUT, Hex Flange, / NUT, Hex Lock, / WASHER, /1 1 1 SPACER SPRING, Compression 1 10 WASHER, / SPACER STOP, Belt 1 1 NUT, Hex Head Whiz Lock, / CAPSCREW, Hex Head, /-1 x 1-/ 11 1 LOCKWASHER, / PULLEY, Idler, OD 111 PIN, Cotter, 1/ X / 11 WASHER, /1 11 CARRIAGE BOLT, /1-1 x / 11 1 CLAMP ROD, Clutch PAD, Reverse Pedal 1 PAD, Brake Pedal FOOT PEDAL & BRAKE ARM ASSEMBLY 11 1 PAD, Forward Pedal Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

22 Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 11 To Starter Motor To Engine Ground Bolt Right Front 1 1 To Circuit Breaker (Red) To Negative Battery Post Black 0 Gray To Engine Ground Bolt Right Front To PTO Clutch To Starter Solenoid To Engine Harness Plug 1 To Top Left of Upper Muffler Duct Regent 11 - Regent 10 - H 11 - Regent 1 - H

23 Electrical Group REF NO PART NO. QTY. DESCRIPTION 1 1 SWITCH, Rocker, Headlight 1 1 SWITCH, PTO, Push Pull 1 1 SWITCH ASSEMBLY, Ignition (Includes Ref. Nos.,,, & ) 10 1 LOCKWASHER, Internal Tooth 1 WASHER 11 1 NUT, Hex Flange, / COVER, Ignition Switch 111 KEY, Ignition 11 1 BOOT, Insulator 10 1 NUT, Hex Flange, MM x CABLE, # x -1/" Long BREAKER, Circuit, 1 Volt 0 Amps SCREW, Hex Head, Taptite, 1/-0 x / BOOT, Insulator, Battery Terminal 1 1 LOCKWASHER 1 11 WASHER 1 1 CAPSCREW, Hex Head, 1/-0 x / CAPSCREW, Hex Head, /1 x 1 x / WASHER ROD, Battery Hold Down NUT, Hex Lock ESNA, / BATTERY, 1 Volt 1 NUT, Hex, 1/ WIRE, #1 x 11" Long 1 1 HARNESS, Wiring, For Honda Engines with Pin Connector 1 1 HARNESS, Wiring, For Honda Engines with out Pin Connector SHRINK TUBE, " Long WIRE ASSEMBLY SWITCH, NC, Gray, Operator Present SWITCH, NO, Black, Push Button W/Boot SWITCH, NC, Gray, Push Button, W/Boot 1 1 CLIP, Wire 11 TIE, Self Locking 101 CABLE, Red, # x -1/" Long Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H

24 Hood, Dash & Fuel Tank Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Panel, Left Side 0 Panel, Right Side Regent 11 - Regent 10 - H 11 - Regent 1 - H

25 Hood, Dash & Fuel Tank Group REF NO PART NO. QTY. DESCRIPTION ELBOW, Fuel Tank to Fuel Hose 10 1 BUSHING 11 1 TANK, Fuel 10 1 CAP, Fuel STRAP 1 1 FASTENER, Panel 11 NUT, Hex Lock ESNA light, / A/R WASHER 11 1 BULKHEAD & TUBE ASSEMBLY 10 NUT, Speed 11 1 SCREW, Hex Washer Head Taptite, 1/-0 x 1/ SCREW, Hex Washer Head Taptite, 1/-0 x 1/ BUSHING MOLDING DASHBOARD, Honda 1 10 SPACER 1 1 CLIP, Wire 1 1 CAPSCREW, Hex Head, 1/-0 x 1-1/ PANEL, Hood, LH PANEL, Hood, LH, Red PANEL, Hood, RH, Orange PANEL, Hood, RH, Red HEADLIGHT ASSEMBLY, (Includes Ref. Nos.,,, ) 11 SOCKET, Headlight 11 1 BEZEL, Headlight 11 BULB, Headlight, 1.V 11 1 LENS, Headlight 10 NUT, Hex Lock ESNA light, 1/ GRILLE, Orange 11 1 GRILLE, Red 11 HINGE SPACER 0 PIN, Quick WASHER 10 CAPSCREW, Hex Head Flange Lock, 1/-0 x / 11 1 HOOD, Orange 11 1 HOOD, Red 1 1 SEAL, Foam 11 1 DUCT, Cooling 11 1 SEAL, Foam Block Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H

26 Seat & Seat Deck Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Regent 11 - Regent 10 - H 11 - Regent 1 - H

27 Seat & Seat Deck Group REF NO PART NO. QTY. DESCRIPTION * SEAT ASSEMBLY 11 NUT, Hex Nylon Lock, /1-1 WASHER,/1 SPRING, Seat 11 1 PLATE, Spring Support 11 CARRIAGE BOLT, /1-1 x / SWITCH, Seat, Used with Seat P/N 1 11 CAPSCREW, Hex Head Whiz Lock, /1-1 x 1/ 11 NUT, Hex Flange Whiz-Lock, /1-1 1 SPEED NUT, Tinnerman Lug Type, / PAN, Seat CAPSCREW, Hex Head Whiz Lock, /1-1 x / 1 11 STOP, Rubber Seat 1 11 BAR, Seat Pivot SEAT DECK, Orange SEAT DECK, Red CONTROL POD, Hydro CAPSCREW, Taptite Hex Washer Head, /1-1 x / CLAMP, Wire (Middle Bolt Only) 1 11 WASHER, /1 0 1 SPACER CAP, Seat Adjust 11 1 LEVER, Seat Latch 1 1 SPRING, Extension 111 SIDE PANEL, Seat Slide 11 1 SLIDE, Seat Footnotes Optional arm rest kit avaliable under Part Number Regent 11 - Regent 10 - H 11 - Regent 1 - H

28 Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. W11 1 REAR WHEELS & TIRES See Transmission Group FRONT WHEELS & TIRES As Required Regent 11 - Regent 10 - H 11 - Regent 1 - H

29 Wheels & Tires Group REF NO PART NO. QTY. DESCRIPTION 1 11 KEY, /1 x 1111 WHEEL & TIRE ASSEMBLY 111 TIRE, 0 x - Super Trac II 111 WHEEL, x 1 VALVE STEM & CAP ASSEMBLY 00 WASHER 1010 WASHER "E"-RING 1 CAP, Hub 111 WHEEL & TIRE ASSEMBLY (Includes Ref. Nos., 11, 1, 1 & 1) WHEEL & BUSHINGS ASSEMBLY (Includes Ref. No. 1) BEARING TIRE, 1 x. - Super Trac II TUBE, Tire Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H

30 Decals Group - Brand & Model NOTE: Unless noted otherwise, use the standard hardware torque specification chart. B11 1, 1, Regent 11 - Regent 10 - H 11 - Regent 1 - H 0

31 Decals Group - Brand & Model REF NO PART NO. QTY. DESCRIPTION 1 11 DECAL, Simplicity Icon DECAL, Simplicity, Hood Stripe RH DECAL, Simplicity, Hood Stripe LH 11 DECAL, Simplicity 10 1 DECAL, Touch Up Paint 1 1 DECAL, Regent, Silver & Blue 1 1 DECAL, 1HP 11 DECAL, Powered by Honda 11 DECAL, Massey Ferguson 1 1 DECAL, Massey Ferguson Hood Stripe, RH DECAL, Massey Ferguson Hood Stripe, LH DECAL, Touch Up Paint, Red 1 11 DECAL, Footnotes Regent 11 - Regent 10 - H 11 - Regent 1 - H 1

32 Decals Group - Safety & Common NOTE: Unless noted otherwise, use the standard hardware torque specification chart. C11 1,, 1 1 DANGER OPERATING ON SLOPES CAN BE DANGEROUS SEE OPERATOR'S MANUAL. IF YOU CANNOT BACK-UP A HILL, DO NOT DRIVE ON IT. WARNING AVOID SERIOUS INJURY OR DEATH READ OPERATOR'S MANUAL(S). KNOW LOCATION AND FUNCTION OF ALL CONTROLS. KEEP SAFETY DEVICES (GUARDS, SHIELDS, SWITCHES, ETC.) IN PLACE AND WORKING. REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE. DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND. NEVER CARRY CHILDREN EVEN WITH BLADES OFF. LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING. AVOID SUDDEN TURNS. IF YOU CANNOT BACK UP A HILL, DO NOT OPERATE ON IT. GO UP AND DOWN SLOPES, NOT ACROSS. IF MACHINE STOPS GOING UPHILL, STOP BLADE AND BACK DOWN SLOWLY. BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLACING HANDS OR FEET NEAR BLADE(S). WHEN LEAVING MACHINE, SHUT OFF ENGINE, REMOVE KEY, AND SET PARKING BRAKE. ROTATING BLADES CUT OFF ARMS AND LEGS STOP MOWER WHEN CHILDREN ARE NEAR. NO RIDERS THEY FALL OFF. 11 DANGER DO NOT TOW TRACTOR! DAMAGE MAY RESULT TO TRANSMISSION , 1 11 STOP ENGINE. MOTOR STOPPEN. MOTOR ANHALTEN. STOP MOTOR. ARRETER LE MOTEUR. FERMARE MOTORE. DO NOT TOW! NIET SLEPEN! NICHT SCHLEPPEN! IKKE BUGSERE! NE PAS REMORQUER! NON TRAINARE! PUSH DUWEN SCHIEBEN SKUB POUSSER SPINGERE DRIVE RIJDEN FAHREN KØR CONDUIRE GUIDARE Regent 11 - Regent 10 - H 11 - Regent 1 - H

33 Decals Group - Safety & Common REF NO PART NO. QTY. DESCRIPTION DECAL, Belts & Mower Blades 11 1 DECAL, Operating Instructions 11 1 DECAL, Safety Instructions * 1 DECAL - Patent * 1 DECAL, Serial Number (Not Serviced) * 1 DECAL, CE & Serial Number Export (Not Serviced) 1 DECAL, USA Logo 11 1 DECAL, PTO Control Symbols 11 1 DECAL, Transmission Relese Valve, Hydros only 1 1 DECAL, " 1 1 DECAL, " 1 DECAL, Danger DECAL, Height of Cut 1 1 DECAL, Danger 1 10 DECAL, Danger Symbol, (CE) DECAL, Free Floating Mower 1 * 1 DECAL, OPEI (Not Serviced) DECAL, Tunnel, Export, (CE) Footnotes * Not a service part Regent 11 - Regent 10 - H 11 - Regent 1 - H

34 " Mower Deck - Belt, Idler Arm & Hitch Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Hook Spring (Ref ) to capscrew & nut when assembled Hook Spring (Ref ) here when assembled. 1 Insert Must Face Out 10 - " Mower 1 - " Mower

35 " Mower Deck - Belt, Idler Arm & Hitch Group REF NO PART NO. QTY. DESCRIPTION 1 1 CAPSCREW, Hex Head, /-1 x -/ G 1 WASHER, Plain, / 11 1 GUARD, Spring 1 1 SPACER PULLEY ASSEMBLY KIT, (Includes Ref. No. ) 1 1 GRIP, Lever 11 1 LOCKWASHER, / NUT, Hex, / SPRING, Idler Arm 11 1 NUT, ESNA Hex Lock, / WASHER, / BUSHING, /, Nylon FITTING, Grease 1 * 1 CLUTCH LEVER ASSEMBLY, See Ref. No SPACER NUT, Hex Flange Lock, / WASHER, Plain, / SPACER 1 11 CAPSCREW, Hex Head, /-1 x 1-/ HITCH ROD, Mower Hitch 11 1 ROD, Latch NUT, Push, 1/ 10 1 SPRING, Hitch Release 0 1 CLUTCH LEVER ASSEMBLY w/ BUSHINGS, (Includes Ref. Nos. 1, 1, and 1) 11 1 V-BELT, Arbor Drive 01 NUT, Hex Lock Aluminum Insert, /-1 Footnotes * Not Serviced Separately " Mower 1 - " Mower

36 " Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. AA Note: Apply Locktite 0 in Hole prior to assembling on rod. 1 1 Insert Must Face Out " Mower 1 - " Mower

37 " Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION 1 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 11 1 BRACKET, Upstop 11 CAPSCREW, Hex Head, /1-1 x 1-1/ 100 WASHER, / CLIP, Spring 11 1 ROD, Transport 10 SPACER 100 WASHER, 1/ 1 NUT, Hex Lock, / U-BRACKET CARRIAGE BOLT, /1-1 x 1-1/ ARM, Rear 1 1 CAPSCREW, Hex Head, Taptite, /1-1 x 1/ BRACKET, Decal DECAL, Height ROD, Latch CARRIAGE BOLT, /-1 x ROCKER ARM ASSEMBLY NUT, Hex Lock, 1/ NUT, HEx Lock ESNA, / STRAP 11 1 ECCENTRIC 1 1 WASHER, Flat, / CAPSCREW, Taptite Hex Washer Head, /1-1 x / 0 NUT, Hex, Flange Collar Lock, / NUT, Hex Lock, Aluminum Insert, / CAPSCREW, Hex Head Taptite, /1 x / 0 1 NUT, Adjuster 10 SPACER BAR, Roller, Support 1 11 CAPSCREW, Hex Head, /1-1 x 1 10 CAPSCREW, Taptite Hex Washer Head, /1-1 x PUSHNUT, /" 11 ROLLER, End 1 WASHER, / 11 ROLLER SHAFT ASSEMBLY 10 PIN 101 CLIP, Hair GAUGE WHEEL Footnotes 10 - " Mower 1 - " Mower

38 " Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. AA Note: Apply Locktite 0 in Hole prior to assembling on rod. 1 1 Insert Must Face Out " Mower 1 - " Mower

39 " Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION 1 1 E-RING, 1/ 11 ARM ASSEMBLY, Adjustable 10 WASHER, Flat, / 11 1 SPACER SPACER CAPSCREW, Hex Head, /-1 x 11 1 ARM, Pitch 10 1 LATCH CAPSCREW, Hex, 1/-0 x -1/ 0 11 WASHER SPRING, Compression 10 1 PUSH NUT, 1/ 11 1 GRIP 11 1 BUTTON HANDLE ASSEMBLY 11 1 CARRIAGE BOLT, /-1 x 1-1/ Footnotes 10 - " Mower 1 - " Mower

40 " Mower Deck - Housing, Arbors & Blades Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Torque to 0-0 ft/lbs Note: for Export 1 for Domestic Export 0 Only 11 0, Viewed From Bottom Torque to - ft. lbs " Mower 1 - " Mower 0

41 " Mower Deck - Housing, Arbors & Blades Group REF NO PART NO. QTY. DESCRIPTION NUT, Hex, Flange, /1-11 WASHER, Belleville 10 1 PULLEY, LH, " OD 11 1 NUT, Hex, / HUB 111 COVER, Arbor Housing BEARING 110 SPACER GASKET, Foam 11 ARBOR HOUSING ASSEMBLY (Includes Fitting Ref. No. 11) 11 1 FITTING, Grease STOP, Belt, LH 1 1 NUT, Hex, Whiz Lock, / CARRIAGE BOLT, 1/-0 x 1-1/, (CE) 1 10 WASHER, Flat, / CAPSCREW, Taptite Hex Washer Head, /1-1 x 1-/ WASHER SHAFT, Arbor SHIELD, Grass, Lower 0 1 BLADE, Mower, 1-1/ BLADE, Mower, -1/ 1 WASHER, Hex 11 WASHER, Spring 1 CAPSCREW, Hex Head, /1-1 x -1/ 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 1 1 MOWER DECK HOUSING, ", Orange 1 1 MOWER DECK HOUSING, ", Red 1 1 MOWER DECK HOUSING, ", Black 111 CARRIAGE BOLT, 1/-0 x / 110 CARRIAGE BOLT, 1/-0 x 1-1/, ( Total for CE) 1 DEFLECTOR, Plastic 101 NUT, Push On 0 10 CARRIAGE BOLT, 1/-0 x 1-1/, (CE) 1 1 CLAMP 11 1 WASHER, Plain, /1 1 1 SPRING 11 LOCKWASHER, 1/ 11 NUT, Hex, 1/ ROD, Deflector, Front 10 1 PULLEY, RH, -1/OD Footnotes 10 - " Mower 1 - " Mower 1

42 " Mower Deck - Housing, Arbors & Blades Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart Torque to 0-0 ft/lbs Note: for Export 1 for Domestic Export 0 Only 11 0, Viewed From Bottom Torque to - ft. lbs " Mower 1 - " Mower

43 " Mower Deck - Housing, Arbors & Blades Group REF NO PART NO. QTY. DESCRIPTION 11 1 STOP, Belt, RH 10 CAPSCREW, Taptite Hex Washer Head, /1-1 x PLUG, Plastic COVER ASSEMBLY, LH, (CE) 1 CARRIAGE BOLT, 1/-0 x 1-1/, (CE) COVER ASSEMBLY, RH, (CE) Footnotes 10 - " Mower 1 - " Mower

44 0" Mower Deck - Belt, Idler Arm & Hitch Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 1 To Slot "B" To Slot "A" Slot "A" Insert Must Face Out Slot "B" " Mower

45 0" Mower Deck - Belt, Idler Arm & Hitch Group REF NO PART NO. QTY. DESCRIPTION NUT, Hex Lock Esna Light, /-1 10 WASHER, / 11 1 PULLEY, Idler 11 1 V-BELT, Arbor Drive 11 1 BELT GUIDE 10 WASHER, / 1 1 ARM ASSEMBLY, Idler with Bushings & Fitting, Tooth CARRIAGE BOLT, /-1 x 1 1 CAPSCREW, Hex Head, /-1 x -/ G 1 WASHER, / SPRING, Extension, Idler Arm SPACER, Hardened GRIP, Black Vinyl for Handle CAPSCREW, Hex Head, /-1 x -1/ PULLEY SPACER 1 1 NUT, Hex Flange Whiz Lock, Large, / CAPSCREW, Hex Head, /-1 x 1-/ 1 1 SPACER ROD, Mower Hitch SPRING, Extension, Hitch Release 11 1 ROD, Latch HITCH, Mower NUT, Push 01 NUT, Hex Lock Aluminum Insert, / WASHER & NUT ASSEMBLY, / x 1-1/ 11 1 SPRING, Extension 11 1 ARM, Idler 111 HUB 0 10 PULLEY, Idler CAPSCREW, Hex Head, /-1 x CAPSCREW, Taptite Hex Washer Head, /1-1 x 1/ 1 1 SPACER 11 1 BELT GUIDE 1 1 BELT, Timing, Tooth Footnotes 1-0" Mower

46 0" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 0 Apply Locktite 0 in hole prior to assembly From "A" To "A" To Handle Assy Insert Must Face Out 1-0" Mower

47 0" Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION 1 11 CLIP, Hair Pin, 1/ x WASHER, /1 10 SPACER 10 1 SHAFT & BAR ASSEMBLY, 0" Roller 11 ROLLER 11 ROLLER 1 1 WASHER, / 1 1 SPACER 11 1 ROD, Transport CLIP, Hair Pin U-BRACKET 1 1 NUT, Hex Centerlock / SPACER WASHER, / CAPSCREW, Hex Head, /1-1 x 1-1/ 1 10 CAPSCREW, Taptite Hex Washer Head, /1-1 x SPACER PIVOT, / Hex 1 10 WASHER, / PIN, Cotter BRACKET, Adjusting 11 CARRIAGE BOLT, /1-1 x 1 10 NUT, Hex Flange Lock, / CARRIAGE BOLT, /1-1 x 1-1/ ARM, 1 1/ 11 1 CAM, Eccentric 1 1/ Hex 1 1 WASHER, /1 11 LOCKWASHER, /1 1 FASTENER, Panel SHAFT ASSEMBLY, Rocker 1 10 CAPSCREW, Hex Head, Taptite /1-1 x / 11 1 UPSTOP 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x / 1 STRAP, Roller Support NUT, Push / 11 1 BAR, Roller 01 1 NUT, Hex Aluminum Lock, /-1 1 SPACER NUT, Hex Centerlock / BRACKET, Height of Cut Footnotes 1-0" Mower

48 0" Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 0 Apply Locktite 0 in hole prior to assembly From "A" To "A" To Handle Assy Insert Must Face Out 1-0" Mower

49 0" Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION DECAL, Height of Cut ROD, Adjustment 10 1 CAPSCREW, Hex Head, /-1 x 1-/ 1 TRUNNION, Rod 11 NUT, Hex, / PIN 10 1 NUT, Hex Flange Lock, / NUT, Hex Jam / NUT, Hex Flange, / GUIDE ASSEMBLY, Rod ROD & WASHER ASSEMBLY, Adjust Handle GRIP, Black Vinyl For Rod 10 1 NUT, Hex Lock Esna Light, 1/ LATCH, /1 WIRE CAPSCREW, Hex Head, 1/-0 x -1/ 11 1 ROD, Latch 10 1 HANDLE ASSEMBLY, Lift 11 1 SPRING, Compression 11 NUT, Hex, / GRIP, Black Soft for Rod BUTTON, Black Nylon for Rod 10 1 PUSH NUT, 1/ Footnotes 1-0" Mower

50 0" Mower Deck - Housing, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 Torque to -0 ft/lbs (0- Nm) Torque to - ft.lbs. (1- Nm) 1-0" Mower 0

51 0" Mower Deck - Housing, Arbors & Blades REF NO PART NO. QTY. DESCRIPTION CAPSCREW, Hex Head, /1-1 x -/ G 1 1 WASHER, /1 11 WASHER, Spring 0 1 CAPSCREW, Hex Head, /1-1 x -1/ G 11 1 PULLEY HUB 1 SPROCKET & FLANGE ASSEMBLY, Riveted, Tooth 1 SHIELD, Arbor Bearing, Upper 1 HOUSING, Arbor Top GASKET, Foam Poly 11 1 ARBOR SHAFT & BEARINGS ASSEMBLY 1 HOUSING, Arbor Bottom with Lube Fitting 1 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x / COVER, Arbor, LH HOUSING ASSEMBLY, 0", Orange HOUSING ASSEMBLY, 0", Red BLADE, Mower, LH 1 1 PIN, Blade 1 1 ADAPTOR, Arbor 1 1 WASHER, Spline 0 10 CAPSCREW, Hex Head, /1-1 x -1/ G CAPSCREW, Taptite Hex Washer Head, /1-1 x 1 00 WASHER, Shim 0 SHIELD, Arbor Bearing, Lower 1 ADAPTER, Blade DEFLECTOR, Discharge 11 1 BLADE, Mower, RH 11 1 CARRIAGE BOLT, /1-1 x CARRIAGE BOLT, 1/-0 x / NUT, Push 0 10 WASHER, 1/ 1 1 CLAMP 11 1 LOCKWASHER, Spring 1/ 11 1 NUT, Hex 1/ DOOR, Mulching, Black Plastic 1 1 SPRING, Torsion ROD, Pivot 11 1 NUT, Hex / LOCKWASHER, Spring / WASHER, /1 Footnotes 1-0" Mower 1

52 0" Mower Deck - Housing, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 1 Torque to -0 ft/lbs (0- Nm) Torque to - ft.lbs. (1- Nm) 1-0" Mower

53 0" Mower Deck - Housing, Arbors & Blades REF NO PART NO. QTY. DESCRIPTION NUT, Push COVER, Arbor, RH Footnotes 1-0" Mower

54 " Mower Deck - Belt, Idler Arm & Hitch Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. Arbor Drive Pulley 1 Arbor Drive Pulley 1 Engine Pulley Tensioning Idler Pulley Arbor Drive Pulley To Slot "A" Slot "A" Hook Spring (Ref ) here when assembled. 1 0 Insert Must Face Out 11 - " Mower 1 - " Mower

55 " Mower Deck - Belt, Idler Arm & Hitch Group REF NO PART NO. QTY. DESCRIPTION V-BELT, Arbor Drive 11 1 CAPSCREW, Hex Head, /-1 x -1/ 10 WASHER, / 11 1 PULLEY ASSEMBLY, OD 11 1 SPACER 1 1 GRIP, Lever ARM, Idler 11 1 LOCKWASHER, Spring, / NUT, Hex, / NUT, Hex Flange Lock, / SPRING, Idler Arm NUT, Hex, Center Lock, / WASHER, / SPACER, Idler Arm CAPSCREW, Hex Head, /-1 x 1-1/ 1 11 CAPSCREW, Hex Head, /-1 x 1-/ SPACER WASHER, / 1 01 NUT, Hex Lock Aluminum Insert, / ROD, Mower Hitch ROD, Latch HITCH NUT, Push, 1/ 10 1 SPRING, Hitch Release Footnotes 11 - " Mower 1 - " Mower

56 " Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. AA Note: Apply Locktite 0 in Hole prior to assembeling on rod Insert Must Face Out Lower hole with swing away rollers Insert Must Face Out " Mower 1 - " Mower

57 " Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION CAPSCREW, Taptite Hex Washer Head, /1-1 x / 11 1 BRACKET, Upstop 11 CAPSCREW, Hex Head, /1-1 x 1-1/ 100 WASHER, / BRACKET, U CLIP, Spring 11 1 ROD, Transport 10 SPACER 1 NUT, Hex Lock, / ARM, Rear CARRIAGE BOLT, /1-1 x 1-1/ QUADRANT, " DECAL, Height BRACKET, Decal 1 1 CAPSCREW, Hex Head, Taptite, /1-1 x 1/ CARRIAGE BOLT, /-1 x NUT, Hex Lock, Aluminum Insert, / CAPSCREW, Hex Head Taptite, /1-1 x / NUT, Adjuster ROD, Latch NUT, Hex Lock, ESNA, / ARM ASSEMBLY, Rocker 1 STRAP 11 1 ECCENTRIC 1 1 WASHER, /1 1 CAPSCREW, Hex Head Taptite, /1-1 x / 0 NUT, Hex Flange Collar Lock, / CARRIAGE BOLT, /-1 x 1-1/ 1 SPACER, 1-1/ x / 0 10 SPACER 1 11 CAPSCREW, Hex Head, /1-1 x 1 10 CAPSCREW, Taptite Hex Washer Head, /1-1 x SHAFT ASSEMBLY 100 PUSHNUT, / 11 ROLLER, End 1 WASHER, / 11 ROLLER 11 1 BAR, Roller, Support 10 PIN CLIP, Hair Pin Footnotes 11 - " Mower 1 - " Mower

58 " Mower Deck - Height Adjustment & Roller Bar NOTE: Unless noted otherwise, use the standard hardware torque specification chart. AA Note: Apply Locktite 0 in Hole prior to assembeling on rod Insert Must Face Out Lower hole with swing away rollers Insert Must Face Out " Mower 1 - " Mower

59 " Mower Deck - Height Adjustment & Roller Bar REF NO PART NO. QTY. DESCRIPTION WHEEL, Gauge 100 WASHER, 1/ 1 "E"-RING, 1/ 11 ARM ASSEMBLY, Adjustable 10 WASHER, / 11 1 SPACER ARM, Pitch 11 1 SPACER CAPSCREW, Hex Head, /-1 x CAPSCREW, Hex Head, /1-1 x / NUT, Hex Lock ESNA, 1/ LATCH CAPSCREW, Hex Head, 1/-0 x -1/ 11 WASHER, / SPRING, Compression 10 1 PUSH NUT 11 1 GRIP, Lift Lever 11 1 BUTTON HANDLE ASSEMBLY Footnotes 11 - " Mower 1 - " Mower

60 " Mower Deck - Housing, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. AA Torque nuts to 0-0 ft. lbs. 1 1 Apply gasket former to this surface if foam gasket (Ref. ) is not used Plug holes outside foot rest as required Plug holes outside foot rest as required Torque screws to - ft. lbs " Mower 1 - " Mower 0

61 " Mower Deck - Housing, Arbors & Blades REF NO PART NO. QTY. DESCRIPTION NUT, Hex, Flange, /1-11 WASHER, Belleville 1111 PULLEY, RH Arbor & LH Arbor, 1/ HUB, Adapter, LH 1 COVER, Arbor Housing 0 BEARING, Upper 11 SPACER, Sleeve, Upper Bearing 11 SPACER, Arbor, Internal BEARING, Lower GASKET, Foam ARBOR HOUSING ASSEMBLY (Includes Fitting Ref. No. 1) 1 1 FITTING, Grease COVER, Arbor LH 1 1 CAPSCREW, Taptite Hex Washer Head, /1-1 x / WASHER, Cup, / SHAFT, Arbor LH SHIELD, Grass, Lower 1 0 BLADE, Mower, 1-1/ 1 1 WASHER, Hex 0 11 WASHER, Spring 1 1 CAPSCREW, Hex, Head, /1-1 x 1-1/ SHAFT, Arbor (RH) 11 1 HOUSING ASSEMBLY, Red 11 1 HOUSING ASSEMBLY, Orange 11 1 HOUSING ASSEMBLY, Black 11 1 COVER, Arbor (RH) 111 CARRIAGE BOLT, 1/-0 x / 101 NUT, Push 10 WASHER, Plain, 1/ 1 CLAMP 11 1 WASHER, Plain, / SPRING, Deflector Retaining 1 11 LOCKWASHER, 1/ 11 NUT, Hex, 1/ ROD, Deflector, Front 11 1 * PLUG, Hole 1 DEFLECTOR, Plastic HUB, Pulley, RH PULLEY, Arbor (Center) HUB, Pulley (Center) Footnotes * Plug holes outside footrest as required 11 - " Mower 1 - " Mower 1

62 " Mower Deck - Housing, Arbors & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart. AA Torque nuts to 0-0 ft. lbs. 1 1 Apply gasket former to this surface if foam gasket (Ref. ) is not used Plug holes outside foot rest as required Plug holes outside foot rest as required Torque screws to - ft. lbs " Mower 1 - " Mower

63 " Mower Deck - Housing, Arbors & Blades REF NO PART NO. QTY. DESCRIPTION 11 1 SHAFT, Arbor (Center) 0 1 * CAPSCERW, Hex Head, Taptite, /1-1 x 1/ 1 11 * NUT, Hex Whiz Lock, / CAP, Spring End Footnotes * Plug holes outside footrest as required 11 - " Mower 1 - " Mower

65 Hardware Identification & Torque Specifications Common Hardware Types Hex Head Capscrew Washer Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 0%) Carriage Bolt Lockwasher Hex Nut Standard Hardware Sizing When a washer or nut is identified as 1/, this is the Nominal size, meaning the inside diameter is 1/ inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/ - 1 x, this means the Nominal size, or body diameter is 1/ inch; the second number represents the threads per inch (1 in this example, and the final number is the body length of the bolt or screw (in this example inches long). The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. 0 1/ 1/ / 1 1/ 1/ / 1/ 1/ / 1/ 1/ / Screw, 1/ x Body Diameter Body Length Nut, 1/ Inside Diameter Hardware Grade No Marks SAE Grade SAE Grade SAE Grade Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm / / / / / / / / / / / / / / / / / / , ,000 1,0.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use % of grade torques. b. for flange whizlock nuts and screws - use 1% of grade torques.. Unless otherwise noted on assembly drawings, all torque values must meet this specification. Wrench & Fastener Size Guide 1/ /1 / /1 DIA. 1/ DIA. 1/ Bolt or Nut Wrench /1 /1 Bolt or Nut Wrench 1/ / Bolt or Nut Wrench /1 /1 Bolt or Nut Wrench (Bolt) / Wrench (Nut) 11/1 1/ Bolt or Nut Wrench /

Regent Series Lawn Tractors & Mower Decks

Parts Manual Regent Series Lawn Tractors & Mower Decks 15HP Tractors Mfg. No. Description 3 Regent, 15HP Hydro (CE) 31 Regent, 15HP Hydro Mower Decks Mfg. No. Description 30 3" Mower Deck 330 3" Mower