M10/30 ILLUSTRATED PARTS LIST HERITAGE TRACTOR CODE 133E ISSUE 01/21/08. PART NO: (Rev A)

Transcription

1 M10/30 HERITAGE TRACTOR CODE 133E ILLUSTRATED PARTS LIST CODE SERIAL NO. 133E ISSUE 01/21/ PART NO: (Rev A)

2

3 Table Of Contents PRODUCT COMPONENTS PAGES Chassis & Hood... 4 Steering... 8 Motion Drive Mower Housing Mower Housing Suspension Decals Electrical System Torque Specification Chart... Inside Back Cover

4 Chassis & Hood NOTE: Unless noted otherwise, use the standard hardware torque specification chart

5 Chassis & Hood REF NO PART NO. 1 MU690566MA 2 MU E549MA 3 MU017X47MA 4 MU MA 5 MU002X16MA 6 MU E701MA 7 MU009X29MA 8 MU009X56MA 10 MU MA 11 MU015X84MA 12 MU E701MA 13 MU26X249MA 14 MU E701MA 15 MU MA 16 MU26X263MA 17 MU E701MA 18 MU015X79MA 19 MU017X45MA 20 MU0031X6MA 21 MU MU MA 23 MU06X111MA 24 MU26X253MA 25 MU26X263MA 26 MU MA 27 MU MA 28 MU E701MA 29 MU26X201MA 30 MU15X116MA 31 MU MA 32 MU MA 33 MU009X47MA 36 MU MA 37 MU MA 39 MU E701MA 40 MU E549MA 41 MU094744MA 42 MU15X116MA 43 MU0025X2MA 44 MU MA 45 MU MA 46 MU MA 47 MU0193X1MA DESCRIPTION SEAT HOOD BOLT, Wing BOLT, Carriage BRACKET, Hinge BOLT, Shoulder BOLT, Shoulder ROD, Battery NUT, Flange PLATE, Rear PLATE, Hitch COVER TRAY, Battery NUT, Flange PIN, Cotter CAP, Fuel Tank (Included with Ref. No. 22) TANK, Fuel (Included with Ref. No. 22) ROD, Hood Prop SPRING, Seat Deck BRACKET, Prop Rod NUT, NY-Lock CONTROL, Throttle COVER, Detent (Black) BOLT, Shoulder FOOTMAT, Left (Black) FOOTMAT, Right (Black) FRAME DECK, Seat BUMPER NUT (Included with Ref. No. 22) KIT, Foil Heat Shield TRIM, Left TRIM, Right FASTENER, Panel Footnotes 5

6 Chassis & Hood NOTE: Unless noted otherwise, use the standard hardware torque specification chart

7 Chassis & Hood REF NO PART NO. 48 MU MA 49 MU15X123MA 50 MU MU MA 52 MU095197MA 53 MU E701MA 54 MU MA 55 MU MA 56 MU MA -- MU DESCRIPTION Plenum NUT, Hex 5/16-18 Valve, Fuel Shutoff SHIELD, Heat HOSE, Clamp FUEL, Hose HEAT SHIELD, Hood REFLECTOR TAPE, Heat Shield Hood REFLECTOR TAPE, Heat Shield Upper BAG, Parts BOOK, Instruction MANUAL, Parts LIst Footnotes 7

8 Steering NOTE: Unless noted otherwise, use the standard hardware torque specification chart

9 Steering REF NO PART NO. 1 MU MA 2 MU MA 3 MU MA 4 MU26X250MA 5 MU MA 7 MU MA 8 MU E701MA 9 MU26X249MA 10 MU009X67MA 11 MU MA 12 MU MA 13 MU E701MA 14 MU E701MA 15 MU015X84MA 16 MU17X104MA 17 MU015X88MA 18 MU01X111MA 19 MU17X118ZMA 20 MU MA 21 MU01X146MA 22 MU011X23MA 23 MU030X35MA 24 MU094131MA 25 MU E701MA 26 MU17X201MA 27 MU E701MA 28 MU17X157MA 29 MU E701MA 30 MU E701MA 31 MU15X118MA 32 MU MA 33 MU17X197MA 34 MU17X157MA 35 MU094618MA 36 MU0025X3MA 37 MU17X146MA 38 MU26x270MA DESCRIPTION WHEEL, Steering Cap, Steering Console, High -Black BEARING, Upper Steering Shaft, Steering SUPPORT, Steering BOLT, Shoulder BEARING, Lower Steering Roller Plate, Gear Mounting Link, Drag NUT, Flange NUT, Flange BOLT, Hex Gear, Pinion BOLT, Hex E-Ring, Retainer PIN, Cotter Retainer, Spring Rack, Steering BRACKET, Axle Front Axle & Spindle Assembly BRACKET, Support NUT, Flange WHEEL, Front Cap, Hub BOLT Footnotes 9

10 Motion Drive NOTE: Unless noted otherwise, use the standard hardware torque specification chart

11 Motion Drive REF NO PART NO MU01X134MA 3 MU MA 5 MU0025X2MA 6 MU MA 7 MU MU165X75MA 9 MU165X148MA 10 MU015X88MA 11 MU26X249MA 12 MU E701MA 13 MU015X84MA 14 MU021544MA 15 MU030X20MA 16 MU017X53MA 17 MU030X20MA 18 MU E701MA 19 MU MA 20 MU091079MA 21 MU E701MA 22 MU092697MA 23 MU ZMA 24 MU MA 25 MU MA 26 MU E701MA 27 MU165X147MA 28 MU009X39MA 29 MU E701MA 30 MU MA 31 MU MA 32 MU E701MA 33 MU0025X7MA 34 MU015X79MA 35 MU E701MA 36 MU094815ZMA 37 MU MA 38 MU E701MA 39 MU0011X7MA 40 MU MA 41 MU002X53MA 42 MU009X39MA 43 MU MA 44 MU37X110MA DESCRIPTION ENGINE, Briggs & Stratton * ( E1) BOLT, Hex SHIELD Assembly, Heat MUFFLER GASKET, Muffler SPRING, Extension SPRING, Extension NUT BRACKET, Left Transaxle NUT, Flange COVER, Pedal PIN, Cotter PIN, Cotter PEDAL ASSEMBLY ROD, Parking Brake GRIP, Parking Brake Rod FRAME GRIP, Shift Lever NUT, Adjusting LINK, Shift LEVER, Shift BRACKET, Lift Pivot SPRING, Extension BOLT, Shoulder BRACKET, Pivot GUIDE, Belt -Short GUIDE, Belt -Long PLATE, Belt Guide BOLT NUT, Flange BRACKET, Support NUT, Adjusting ROD, Clutch CLUTCH Arm Assembly RING, Retainer PULLEY, Drive BOLT, Carriage BOLT, Shoulder PULLEY, Idler BELT, Motion Drive Footnotes Note* For information on Replacement Parts contact the manufacturer. Note** Contact your nearest Peerless transaxle dealer for parts and service. 11

12 Motion Drive NOTE: Unless noted otherwise, use the standard hardware torque specification chart

13 Motion Drive REF NO PART NO. 45 MU MA 46 MU019X35MA 47 MU17X170MA 48 MU01X140MA 49 MU017X91MA 50 MU E701MA 51 MU E701MA 52 MU094067MA 53 MU01X155MA 54 MU01X120MA 55 MU E701MA 56 MU06X105MA 57 MU017x38MA 58 MU015X43MA 59 MU ZMA 60 MU17X148MA MU E701MA 64 MU17X160MA 65 MU056534MA 66 MU MA 67 MU MA 68 MU094618MA 69 MU0011X3MA 70 MU17X195MA 71 MU E701MA 72 MU092378MA 73 MU015X43MA 74 MU MA 75 MU06x103MA 76 MU26x263MA 77 MU MA DESCRIPTION PULLEY, Split Stack, Star BOLT, Hex ARM, Rear BRACKET, Rear Hanger PIN, Threaded Shoulder BOLT, Hex BOLT BRACKET, Torque Reactor, Shift Yoke NUT YOKE, Shift TRANSAXLE, Peerless ** BRACKET, Right Transaxle KEY, Square SPACER, Rear Wheel WHEEL, Rear -15" CAP, Hub E-RING PLATE, Reinforcement LOCK, Screw NUT TUBE, Exhaust SHIELD, Heat Footnotes Note* For information on Replacement Parts contact the manufacturer. Note** Contact your nearest Peerless transaxle dealer for parts and service. 13

14 Mower Housing NOTE: Unless noted otherwise, use the standard hardware torque specification chart

15 Mower Housing REF NO PART NO. 1 MU37X111MA 2 MU MA 3 MU15X140MA 4 MU015X98MA 5 MU MA 6 MU015X84MA 7 MU E701MA 8 MU015X79MA 9 MU009X58MA 10 MU E701MA 11 MU017X91MA 12 MU0031X4MA 13 MU094067MA 14 MU E701MA 15 MU E701MA 16 MU E701MA 17 MU094137MA 18 MU017X45MA 19 MU095004MA 20 MU166X43MA 21 MU166X42MA 22 MU MA 23 MU E701MA 24 MU E701MA 26 MU MA 27 MU E701MA 28 MU009X39MA 29 MU017X47MA 30 MU165X157MA 31 MU166X46MA 32 MU009X42MA 34 MU030X20MA 35 MU E701MA 36 MU MA 37 MU0025X7MA 38 MU E701MA 39 MU MA 40 MU ZMA 42 MU019X45MA 43 MU002X94MA 45 MU002X53MA 47 MU E701MA 48 MU E701MA DESCRIPTION BELT, Blade Drive PULLEY, Input NUT, Lock NUT, Flange PULLEY, Idler NUT, Flange ARM, Rear NUT, Flange BOLT, Shoulder LINK, Lift PIN, Hair PIN, Threaded Shoulder BRACKET, Left Rear BRACKET, Right Rear Plate, Adjustment PAD, Friction Wingnut SPRING, Left Torsion SPRING, Right Torsion TUBE, Spacer BRACKET, Deck HANGER, Front SHAFT, Splined IDLER ARM, Assembly BOLT, Shoulder SPRING, Extension SPRING, Torsion BOLT, Shoulder PIN, Cotter BRAKE, Arm, Assembly LINK, Idler Arm BOLT BRACKET, Brake Mounting SPACER, Jackshaft PLATE, Idler Mounting BOLT, Carriage BOLT, Carriage HOUSING, Blade HINGE, Mulching Cover Footnotes 15

16 Mower Housing NOTE: Unless noted otherwise, use the standard hardware torque specification chart

17 Mower Housing REF NO PART NO. 49 MU015X88MA 50 MU028X76MA 51 MU014X86MA 52 MU002X74MA 53 MU091767ZMA 54 MU028X23MA 55 MU MA 56 MU094305MA 57 MU MA 58 MU E701MA 59 MU17X166MA 60 MU17X165MA 61 MU15X100MA 62 MU MA 63 MU17X120MA 64 MU025X23MA 65 MU092281MA 66 MU94282MA 67 MU090904MA 68 MU092282MA 69 MU E701MA DESCRIPTION NUT, Flange NUT, Speed NUT, Wing BOLT, Carriage ROD, Chute Deflector CAP, Push COVER, Mulch MANDREL, Housing ADAPTER, Blade BLADE, Cup NUT, Blade Mount DEFLECTOR, Chute BOLT BEARING, Upper Jackshaft JACKSHAFT, Housing BEARING, Spacer BEARING, Lower Jackshaft PLATE, Jackshaft Support Footnotes 17

18 Mower Housing Suspension NOTE: Unless noted otherwise, use the standard hardware torque specification chart

19 Mower Housing Suspension REF NO PART NO. 1 MU092697MA 2 MU MA 3 MU165X154MA 4 MU094137MA 5 MU017X45MA 6 MU095004MA 7 MU E701MA 8 MU MA 9 MU0031X4MA 10 MU002X93MA 11 MU E701MA 12 MU MA 13 MU26X249MA 14 MU E701MA 15 MU17X206MA 16 MU093349MA 17 MU015X79MA 18 MU015X84MA 19 MU MA 20 MU E701MA 21 MU MA 22 MU26X263MA 23 MU094198MA 24 MU E701MA 25 MU009X42MA 26 MU165X157MA 27 MU165X92MA 30 MU E701MA 31 MU26X267MA DESCRIPTION GRIP, Lift Lever LEVER, Lift SPRING, Extension PAD, Friction NUT, Wing Link, Lift Tube, Spacer PIN, Hair BOLT, Carriage BRACKET, Front Hanger Pivot PIN, Front Hanger Arm Assembly, Lifter, Guide NUT, Flange NUT, Flange SPRING, Leaf HANGER, Front LEVER, PTO GRIP, PTO BRACKET, PTO BOLT, Shoulder SPRING, Extension SPRING, Extension Plate, Reinforcement Footnotes 19

20 Decals NOTE: Unless noted otherwise, use the standard hardware torque specification chart

21 Decals REF NO PART NO. 1 MU48X724MA 2 MU48X4033MA 3 MU MA 4 MU MA 5 MU48X4032MA 6 MU48X727MA 7 MU48X4034MA 8 MU48X726MA 9 MU48X728MA 10 MU48X736MA 11 MU48X729MA 12 MU44X5936MA 13 MU48X511MA 14 MU44X6828MA 15 MU44X7027MA 16 MU48X5223MA 17 MU MA DESCRIPTION DECAL, Engagement DECAL, Cut Finger Symbols DECAL, Hayter Emblem DECAL, M10/30 DECAL, Warning, Export DECAL, Height Adjust, 6 Positions DECAL, No Step, Export DECAL, Park Brake Symbol DECAL, Throttle Control DECAL, Clutch/Brake XPT DECAL, Gas Gauge DECAL, Heat Shield Warning DECAL, Warning Load Limit, Export DECAL, Warning Pinch Point DECAL, Deck Level DECAL, Gear Select, 5 Speed DECAL, Hayter Heritage Footnotes 21

22 Electrical System NOTE: Unless noted otherwise, use the standard hardware torque specification chart

23 Electrical System REF NO PART NO. 1 MU250X147MA 2 MU MA -- MU327349MA 3 MU MA 4 MU054212MA -- MU407078MA 5 MU MA -- MU26X229MA -- MU15X116MA 6 MU24X37MA MU002X82MA -- MU014X79MA 8 MU094159MA 9 MU024X24MA -- MU690604MA 10 MU032618MA DESCRIPTION Harness, Chassis Wire Switch, Ignition Key, Ignition Switch, Limit Fuse Holder, Fuse Solenoid, Mounting Locknut CABLE, Battery Ground Battery 165 CCA 7.2V min x 5.25 x 6.33 BOLT, Carriage Wingnut Switch, Seat Sensor CABLE, Red Battery Boot, Positive Terminal Strap, Tie Footnotes 23

24

25

26

27 Hardware Identification & Torque Specifications Common Hardware Types Hex Head Capscrew Washer Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Carriage Bolt Lockwasher Hex Nut Standard Hardware Sizing When a washer or nut is identified as 1/2, this is the Nominal size, meaning the inside diameter is 1/2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/2-16 x 2, this means the Nominal size, or body diameter is 1/2 inch; the second number represents the threads per inch (16 in this example, and the final number is the body length of the bolt or screw (in this example 2 inches long). The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. 0 1/4 1/2 3/4 1 1/4 1/2 3/4 2 1/4 1/2 3/4 3 1/4 1/2 3/4 Screw, 1/2 x 2 Body Diameter Body Length Nut, 1/2 Inside Diameter Hardware Grade No Marks SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm / / / / / / / / / / / / / / / / / / , ,000 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. 4 Wrench & Fastener Size Guide 1/4 5/16 3/8 7/16 DIA. 1/2 DIA. 1/4 Bolt or Nut Wrench 7/16 5/16 Bolt or Nut Wrench 1/2 3/8 Bolt or Nut Wrench 9/16 7/16 Bolt or Nut Wrench (Bolt) 5/8 Wrench (Nut) 11/16 1/2 Bolt or Nut Wrench 3/4

28