Frame & Front Axle Group

Size: px

Start display at page:

Download "Frame & Front Axle Group"

Priscilla Price
5 years ago
Views:

1 Tondeuse autoportée essence NPB80/02H

3 Table Of Contents PRODUCT COMPONENTS PAGES Frame & Front Axle Group... 4 Steering Group... 6 Engine Group - 8HP... 8 Transmission SERVICE PARTS - Tuff Torq K46CW... 0 Control Group... 4 Electrical Group... 8 Hood, Grille & Dash Group Seat Deck & Fuel Tank Group Mulching Group Rear Discharge Deflector Group Lift Group Wheels & Tires Group Decal Group Collector Group Back Plate Group French Guard Group " Mower Deck - Belt & Idler Arm Group " Mower Deck - Housing, Hitch, Arbors & Blade Group Torque Specification Chart... Inside Back Cover

4 Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

5 Frame & Front Axle Group REF NO PART NO. QTY SM SM SM SM SM ASM SM SM SM SM SM ASM ASM SM ASM SM YP YP YP YP YP SM YP SM YP SM SM SM YP YP YP YP YP 2 DESCRIPTION CAP, Hub.5D RING, Klipring WASHER, 828 x.62 x.0583 AXLE, Front (Includes Ref. Nos., 2, 3, 7 & 9) BUSHING, Axle Pivot HOOK, Hitch, 5/6 CAPSCREW, 7/6-4 x -/2 NUT, Hex Flange, 5/8- NUT, Hex Flange, 5/6-8 CAPSCREW, Hex 3/8-6 x -/4 SPACER ROD, Tie SPINDLE AND CUP ASSEMBLY, Right NUT, Hex Flange, 3/8-6 SPINDLE AND CUP ASSEMBLY, Left TOWER FRAME BOLT, M8 x 75 NUT, M8 WASHER, 8.4 WASHER, 8 SCREW, Tap 5/6-8 x 5/8 BOLT, M8 x 20 PIVOT, Hood SUPPORT, Muffler BOLT, Round Head, 5/6-8 x WASHER, 5/8 CAPSCREW, Hex 5/8- x 3-/4 DRAG LINK BALL JOINT, CS6 M0-M2 NUT, M2 DISTANCE, Front Axle NUT, M0 Footnotes 5

6 Steering Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

7 Steering Group REF NO PART NO. QTY SM SM SM SM SM SM YP SM YP SM SM SM SM SM YP YP 4 DESCRIPTION SHAFT, Steering Gear & Spline WASHER, 3/4 BUSHING STEERING WHEEL NUT, Hex-Lock 5/8-8 CAP, Steering Wheel NUT, M8 BRACKET, Sector Support BOLT, M8 x 25 GEAR, Steering.250 THK 26 Teeth SPACER, Sector Gear SCREW, Hex LK Flange 3/8-6 x.00 NUT, Hex-Flange 3/8-6 LK RING, Klipring WASHER, 8.4 WASHER, 8 Footnotes 7

8 Engine Group - 8HP NOTE: Unless noted otherwise, use the standard hardware torque specification chart

727979SM 0 727980SM 4 925003SM 4 5 2834683SM 6 734505SM 7 736993YP 2 8 73593YP 9

28 73605SM 29 708264SM 30 9899SM 3 960649SM 32 7324SM 2 33 736996YP 2 34 936228SM 4

V-Twin Intek (Engine Model: 405577-030-B) VALVE, Shut Off Oil Drain SHIELD, Heat

Twin SUPPORT, Muffler PIPE, Exhaust PIPE, Exhaust CAPSCREW, Hex Washer Head,

CAPSCREW, M8 x 35 LOCKWASHER, External Tooth, 3/8 WASHER, 9 PULLEY & HUB ASSEMBLY,

CAPSCREW, Hex Head, 7/6-20 x 3-/2 GASKET, Exhaust CAPSCREW, CREW, M8 x 45 CAPSCREW,

9 Engine Group - 8HP REF NO PART NO. QTY B SM YP SM ASM SM ASM SM SM SM SM SM YP YP SM YP SM YP SM YP SM SM SM SM SM SM YP SM SM YP YP 4 DESCRIPTION *ENGINE, 8HP Briggs & Stratton, V-Twin Intek (Engine Model: B) VALVE, Shut Off Oil Drain SHIELD, Heat Change CAPSCREW, Hex Washer Head, Taptite, 5/6-8 x 5/8 HEAT SHIELD, Engine MUFFLER, Twin SUPPORT, Muffler PIPE, Exhaust PIPE, Exhaust CAPSCREW, Hex Washer Head, Taptite, /4-20 x /2 CLIP, Wire CONTROL, Throttle CLAMP HOSE, Fuel CLIP, Hose CAPSCREW, M8 x 35 LOCKWASHER, External Tooth, 3/8 WASHER, 9 PULLEY & HUB ASSEMBLY, Engine TIE RETAINER, Clutch CLUTCH, Electric WASHER, Hex LOCKWSHER, Spring, 7/6 CAPSCREW, Hex Head, 7/6-20 x 3-/2 GASKET, Exhaust CAPSCREW, CREW, M8 x 45 CAPSCREW, Hex Socket Head, 5/6-8 x 3/4 LOCKWASHER, Spring, 5/6 WASHER, 8.4 NUT, 8 Footnotes Note* For information on Replacement Parts contact the engine manufacturer. 9

10 Transmission SERVICE PARTS - Tuff Torq K46CW NOTE: Unless noted otherwise, use the standard hardware torque specification chart

Transmission SERVICE PARTS - Tuff Torq K46CW REF NO PART NO. QTY.

Upper Case 3 724278SM LOWER CASE 7 73989YP VENT VALVE 8 724279SM

*BYPASS SHAFT 3 72048SM LEVER, Bypass 4 ----- *RING, Snap, 0 5

WASHER, 8 8 ----- *KIT, Drain Bolt 9 70869SM 0-RING A P0A 20 70865SM

Tapping, 8 * 30 24 ----- *KIT, Center Case 25 78070SM PIN 3 * 9.

2 29 ----- *IDS SPRING 30 ----- *IDS FILTER 300 3 72583SM KIT,

78076SM E-RING, 5 35 708673SM BEARING, 6202C32C3 36 78077SM MOTOR

(Motor) or) 39 78074SM WASHER, 2 * 24 * 40 724943SM MOTOR SHAFT 4

78083SM BEARING, 6202 44 78089SM THRUST METAL 45 ----- *SWASH PLATE

----- *CONTROL SHAFT Footnotes *Note: See your local authorized

11 Transmission SERVICE PARTS - Tuff Torq K46CW REF NO PART NO. QTY. DESCRIPTION YP TRANSMISSION, Tuff Torq, K46CW *KIT, Upper Case SM LOWER CASE YP VENT VALVE SM MAGNET *KIT, Pump Shaft / Bearing *SPRING *BYPASS SHAFT SM LEVER, Bypass *RING, Snap, SM SEALING CAP, SM SNAP RING, C YP SEAL WASHER, *KIT, Drain Bolt SM 0-RING A P0A SM SEAL TC *SCREW, Tapping, 8 * SM SCREW, Tapping, 8 * *KIT, Center Case SM PIN 3 * *FILTER *BOLT 0 * *IDS VALVE *IDS SPRING *IDS FILTER SM KIT, Cylinder Block (Pump) SM SPRING YP PUMP SHAFT SM E-RING, SM BEARING, 6202C32C SM MOTOR HOUSING *THRUST BEARING *KIT, Cylinder Block (Motor) or) SM WASHER, 2 * 24 * SM MOTOR SHAFT SM SNAP RING, S SM BRAKE DISC/MOTOR GEAR (0T) SM BEARING, SM THRUST METAL *SWASH PLATE CMP *THRUST BEARING (PUMP) KIT *MAGNET HOLDER *CONTROL SHAFT Footnotes *Note: See your local authorized dealership for parts and warranty or contact Tuff Torq at es.com (U.S Int'l )

12 Transmission SERVICE PARTS - Tuff Torq K46CW NOTE: Unless noted otherwise, use the standard hardware torque specification chart

62 ----- 63 ----- 64 ----- 65 724948SM 66 724949SM 67 ----- 68 724303SM 69 724304SM 70 782SM 7 783SM 72 78SM 73

739893YP 85 72434SM 86 72435SM 87 72436SM 90 707839SM 9 72438SM 95 ----- 99 ----- 200 739894YP 20 ----- QTY.

*SPRING PIN 6 * 36 ROLL PIN 6 * 40 O-RING A P4 *NUT 2 *KIT, Differential Gear *FINAL GEAR (54T) *FINAL PINION COLLAR

THRUST WASHER RING, 7 SEAL, 9 * 32 * 8 BUSHING, 9 * 25 *BUSHING 9.

*SPRING PIN 4 * 6 SPLINE COLLAR PULLEY C FAN, White WASHER, Wave RING, Snap SPRING PIN, 3.0A * 20 OIL SEAL 6 * 22 *.

13 Transmission SERVICE PARTS - Tuff Torq K46CW REF NO PART NO SM SM SM SM SM SM SM SM SM 7 783SM 72 78SM SM SM SM SM SM SM SM YP SM SM SM SM SM YP QTY. DESCRIPTION FULCRUM *TORSION SPRING *CONTROL ARM A CONTORL LEVER C *JERKY PLATE *WASHER 2 *COTTER PIN /8 * 3/4 *SPRING PIN 6 * 36 ROLL PIN 6 * 40 O-RING A P4 *NUT 2 *KIT, Differential Gear *FINAL GEAR (54T) *FINAL PINION COLLAR *REDUCTION SHAFT WASHER, 2 * 32 * 32 REDUCTION GEAR (38T) *FINAL PINION GEAR (0T) AXLE SHAFT, Left AXLE SHAFT, Right THRUST WASHER RING, 7 SEAL, 9 * 32 * 8 BUSHING, 9 * 25 *BUSHING 9.05 BRAKE SHOE BRAKE LEVER *BRAKE SHAFT *BRAKE RETURN SPRING BRAKE ACTUATOR TOR SPRING PIN, 5 * 32 O-RING A P2 *SPRING PIN 4 * 6 SPLINE COLLAR PULLEY C FAN, White WASHER, Wave RING, Snap SPRING PIN, 3.0A * 20 OIL SEAL 6 * 22 *.03 *SPRING PIN 3.0A * 6 *SEALANT SEAL KIT (K46 & T40) *KIT, Repair, K46 (CE,CR) Footnotes *Note: See your local authorized dealership for parts and warranty or contact Tuff Torq at es.com (U.S Int'l ) 3

14 Control Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

7359YP 3 735974YP 4 735595ASM 5 727246SM 6 727259SM 7 727897SM7897SM 8 727899SM9SM 9 728976SM 20 728024SM 2 727898SM

735968YP 32 727935SM 33 735896YP 4 34 73588YP 4 35 735850YP 36 728SM 2 37 735969YP 38 735943YP 39 735875YP 40

Brake LEVERe, Brake ROD, Traveling ROD, Brake PULLEY, Tensioning PULLEY, Idler (Includes References: 52, 7, 72, 73,

95" BUSHING, 0-942-48 WASHER, Lock SPRING, Flat 0-9740-22 V-BELT, 3 x 2580 Li BBT PULLEY, Compensa C-00237/ PEDAL,

15 Control Group REF NO PART NO. QTY YP YP YP YP YP YP YP YP YP YP 73590YP YP YP ASM SM SM SM7897SM SM9SM SM SM SM SM YP YP YP YP YP YP YP SM YP SM YP YP YP SM YP YP YP YP YP YP YP 2 DESCRIPTION PEDAL, Forward RATCHET ARM PEDAL, Brake LEVER, Parking Brake LEVERe, Brake ROD, Traveling ROD, Brake PULLEY, Tensioning PULLEY, Idler (Includes References: 52, 7, 72, 73, 74, 75, 76, 77, & 78) HOLDER, Left HOLDER, Right SUPPORT, Switch LATCH, Brake Lock PEDAL, Reverse PAD, Foot Pedal LATCH, Cruise ROD, Cruise 5/6 dia. x 2.83" BOLT, Shoulder 5/6-8 x -5/8 SPACER, Foot Pedal ROD, Cruise, Latch, Upper ROD, /4 dia x 5.95" BUSHING, WASHER, Lock SPRING, Flat V-BELT, 3 x 2580 Li BBT PULLEY, Compensa C-00237/ PEDAL, Forward Rubber BOLT, PEDAL, Brake Pad SPRING, TLZ Yellow SPACER, Pivot DISTANCE, Pedal BUSHING, BALL JOINT, CS 3 DIN 7802 M8 Silver CLIP LINKAGE, /4 dia SPRING, TZ 2x4 x 62 Yellow PEDAL, Forward Top BOLT, Eye M6 x 80 BN006 BOLT, M6 x 6 Washer 6.4 NUT, M8 SPINDLE, 2 x 20 Footnotes 5

16 Control Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

17 Control Group REF NO PART NO. QTY YP YP SM SM YP YP YP YP YP SM YP YP YP YP YP YP YP SM SM YP SM YP YP YP YP YP YP YP YP YP YP YP DESCRIPTION PIN, Flex 5 x 25 LOCK RING, 2 BOLT, Shoulder, 5/6-8 x -/4 NUT, Hex Flange, 5/6-8 x -5/8 BOLT, M0 x 40 WASHER, 0.5 WASHER, 0 NUT, M0 LOCK RING SCREW, Tap 5/6-8 x 5/8 NUT, M0 NUT, M8 BOLT, M8 x 45 WASHER, 8.4 NUT, M8 WASHER, 8 BOLT, M8 x 75 BOLT, Shoulder 5/6-8 x.5 TRANSMISSION, Tuff Torq, K46CW NUT, M6 SPRING WASHER, 4 x 26/0.2 NUT, M8 BOLT, M8 x 6 SCREW, M0 x 45 LOCK RING, 40 BUSHING, Pulley, Tension PULLEY BALL BEARING, Pulley WASHER, ARM, Pulley, Tension BEARING, Slide Footnotes 7

18 Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

726556SM 22 7695SM 23 7226SM 27 732006SM 28 732005SM 29 76549SM 30 72830SM 3 7363SM 32 286964SM 2 34 2860750SM 2 35 282334SM 2 36 28239SM 2 37 286622SM 2 38 677296SM 39 73535SM 40 735980YP 5 42

HOLD DOWN, Battery BOLT, Carriage, /4-20 X 7/8 WASHER, Flat, /4 PUSHNUT, /4 NUT, ESNA, /4 SOLENOID, 2V SCREW, Hex Washer Head, Taptite, /4-20 x /2 SWITCH ASSEMBLY, Ignition (Includes References 3, 4,

19 Electrical Group REF NO PART NO. QTY YP SM SM SM SM SM SM SM SM SM SM YP SM SM SM SM SM SM7SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM YP SM SM SM SM YP YP YP DESCRIPTION HARNESS, Main SUPPORT, Battery SCREW, Hex Washer Head, Taptite, 5/6-8 x 5/8 BATTERY, 2V 230 CCA DRY HOLD DOWN, Battery BOLT, Carriage, /4-20 X 7/8 WASHER, Flat, /4 PUSHNUT, /4 NUT, ESNA, /4 SOLENOID, 2V SCREW, Hex Washer Head, Taptite, /4-20 x /2 SWITCH ASSEMBLY, Ignition (Includes References 3, 4, 5, & 6) WASHER, 5/8 LOCKWASHER, Int. Tooth.62 NUT, Hex Flange, Ignition Switch 5/8-32 COVER, Ignition Switch PLUG, Hour Meter SWITCH, PTO SWITCH, RMO Module SWITCH, Head lights PLUG SWITCH, Push (Foot Pedal) SWITCH, Push NC (Seat) CABLE, #6 0.0 Lg Red CABLE, # Lg Red CABLE, # Lg Black LOCKWASHER, Spring, /4 NUT, Hex KEPS, 5/6-24 CAPSCREW, Hex /4-20 x 3/4 WASHER, Flat, /4 NUT, Hex, /4-20 BOOT, Insulator, Battery BOOT, Insulator, Red TIE, RT 360 /L=50/ PLUG, Aux, 2V, (With Cover) SWITCH, NO (RMO) NUT, Flange, Whiz /4-20 KEY, RMO Module MICROSWITCH, MKH 2 D3 S BEEPER, PF 27 A 29 EP WIRE, Footnotes 9

20 Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

21 Electrical Group REF NO PART NO. QTY YP SM SM YP SM SM SM SM SM SM SM DESCRIPTION CABLE CLIP CLIP, Speed Wire PLUG, Shut-Off CLIP, Cable WCK 460 0/A SOCKET ASSEMBLY BULB, 4-2V 2CP REFLECTOR, Headlight LENS, Headlight HEADLIGHT ASSEMBLY (Includes References 56, 57, 58 & 59) KEY, Ignition (Set of 2) FUSE Footnotes 2

22 Hood, Grille & Dash Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

Hood, Grille & Dash Group REF NO PART NO. QTY.

6-2 728974SM 6-3 67737SM 2 6-4 72345SM 2 7 728975SM 8 960392SM 3 9 72323SM 20 933896SM 3 2 925003SM 24 732030SM 25 73203SM 26 735878YP 2 27 727280ASM 28 735879YP 30 735868YP 4 3 735989YP 4 32

OD, Red DUCT, Air Inlet PANEL, Side, R.H.

23 Hood, Grille & Dash Group REF NO PART NO. QTY DSM YP BFYP BFYP BFYP ASM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM SM YP ASM YP YP YP YP YP SM DESCRIPTION HOOD, Red DUCT, Air Inlet PANEL, Side, R.H. PANEL, Side, L.H. GRILLE, White HINGE, Hood, L.H. CAPSCREW, Hex Flange Whiz Lock, /4-20 x 5/8 NUT, Hex Flange, Whiz Lock, /4-20 DASHBOARD KNOB, Brake Lock KNOB, Cruise Lock PUSHNUT, /4 CAPSCREW, Hex Washer Head, Taptite, 5/6-8 x 3/4 WASHER, 5/6 COVER, Steering Shaft HEADLIGHT ASSEMBLY (Includes Ref. Nos. 6-, 6-2, 6-3 & 6-4) REFLECTOR LENS BULB, 2V SOCKET INSERT, Lightbar SCREW, Pan Head Phillips, #0-24 x /2 ROD, Dash Support, 0" NUT, Nylon Insert Lock, 0-24 CAPSCREW, Hex Washer Head, Taptite, /4-20 x /2 GUIDE, Hood, L.H. GUIDE, Hood, R.H. BRAID, Steel Insert HINGE, Hood, R.H. BUMPER, Front CAPSCREW, M8X40 WASHER, 8.4 WASHER, 8 NUT, M8 EDGING Footnotes 23

24 Seat Deck & Fuel Tank Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

Seat Deck & Fuel Tank Group REF NO PART NO. QTY. DESCRIPTION 735259BFYP SEAT DECK, White 2 93333SM 2 BOLT, Shoulder, 5/6-8 x 3/4 4 728007SM PAD, Footrest, R.H.

6 735976YP TANK, Fuel 7 7597SM CAP, Fuel Tank 8 739535YP POD, L.H.

25 Seat Deck & Fuel Tank Group REF NO PART NO. QTY. DESCRIPTION BFYP SEAT DECK, White SM 2 BOLT, Shoulder, 5/6-8 x 3/ SM PAD, Footrest, R.H SM PAD, Footrest, L.H YP TANK, Fuel SM CAP, Fuel Tank YP POD, L.H YP SEAT, Hi Back SM 4 SPACER, 5/6 ID x -/4 OD x 5/ ASM SUPPORT, Seat AYP LATCH, Seat SM 4 CAPSCREW, Hex Flange Whiz Lock, Dog Point, 5/6-8 x SM 4 WASHER, 5/ SM 2 COVER, Spring SM 6 NUT, Hex Flange, ESNA, 5/ SM 4 WASHER, Spring SM 2 SPRING, Compression SM2SM 2 BOLT, Carriage, 5/6-8 x 3/ ASM PIVOT, Seat SM 2 BOLT, Shoulder, 5/6-8 x -/ YP POD, R.H SM 6 CAPSCREW, Hex Washer Head, Plastite, /4 x / YP 2 BOLT, M8 x YP 4 WASHER, YP 4 WASHER, YP 2 BOLT, M8 x YP 2 NUT, M YP DISTANCE, Lift YP BOLT, M6 x YP NUT, M YP 4 BRAID, Steel Insert YP HOSE, Air Escape YP 2 CLAMP YP WASHER, 6.6 Footnotes 25

26 Mulching Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

0 73625YP 5 73624YP 2 2 73623YP 3 73622YP 2 4 7362YP 3 DESCRIPTION FLANGE, Mowing

27 Mulching Group REF NO PART NO. QTY YP YP YP YP YP YP YP YP YP YP YP YP YP YP 3 DESCRIPTION FLANGE, Mowing TUBE HOLDER FULL TUBE HANDLE SPLIT PIN SCREW, M8 x 45 NUT, M8 SCREW, M8 x 35 WASHER, 8 NUT, M8 SPRING CASING SCREW, M8 x 2 Footnotes 27

28 Rear Discharge Deflector Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

29 Rear Discharge Deflector Group REF NO PART NO. QTY. DESCRIPTION YP DEFLECTOR, Complete 73970YP DEFLECTOR YP DEFLECTOR HOLDER YP HARI PIN YP 2 SCREW, With Starlike Knob YP 4 WASHER, YP 4 NUT, Selflock, M YP 4 SCREW, Flat Head, M6 x YP BAND YP NUT, With Starlike Knob YP CORD, Hair Line, 550mm SM 2 NUT, M YP 2 WASHER, 8.4 Footnotes 29

30 Lift Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

735967YP 2 3 735898YP 4 735899YP 5 735956YP 6 722302SM 7 960044SM 8 727954SM7954SM 9 729652SM2SM 20 728990SM 2 727935SM 22

2 33 735965YP 2 34 27602SM 35 735964YP 4 36 735856YP 4 37 735993YP 4 38 735992YP 4 39 735927YP 8 40 735925YP 4 42 735986YP 44

Mowing -930-47 DISTANCE, Lift Hitch 0-952-290 SPRING, 0-9746-460 SPRING, 0-9746-483 HANDLE, Extend, Left HANDLE, Extend,

375 dia SPRING, Torsion CLEVIS, Lift SPACER, Pivot PIN, Hitch HANGER, Front DECAL, Height of Cut QUADRANT, Lift Height

31 Lift Group REF NO PART NO. QTY YP YP YP YP YP YP YP YP YP YP YP YP YP YP SM SM SM7954SM SM2SM SM SM SM ASM SM SM SM SM SM SM SM YP YP YP SM YP YP YP YP YP YP YP YP 4 DESCRIPTION MOWING MECHANISM HINGE, Front ARM, Lift ROD, Lift TIE ROD, Lift DISTANCE, Lift PIN, PIN, Mowing DISTANCE, Lift Hitch SPRING, SPRING, HANDLE, Extend, Left HANDLE, Extend, Right ROD, Lift -Change GRIP, Black WASHER, 0.32 ROD, Lift.375 dia SPRING, Torsion CLEVIS, Lift SPACER, Pivot PIN, Hitch HANGER, Front DECAL, Height of Cut QUADRANT, Lift Height CAPSCREW, 5/6-8 x CAPSCREW, Taptite, 5/6-8 x 5/8 NUT, Hex Flange, 5/6-8 BOLT, /4-20 x 5/8 NUT, Hex Flange, Whiz /4-20 BUSHING, LOCKRING, 2 PIN, Flexible CLIP, Pin Safety SPINDLE, 3.2 x 25 BOLT, M2 x 25 WASHER, 3 WASHER, 2 NUT, M2 NUT, M0 V-Belt, Li, BBT, 7 x 200 NUT, M2 Footnotes 3

32 Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

2860202SM 2 26 735988YP 8 DESCRIPTION WHEEL AND TIRE ASSEMBLY, Rear, 22 x 0-8 WHEEL AND TIRE ASSEMBLY, Front,

33 Wheels & Tires Group REF NO PART NO. QTY SM SM SM SM SM SM SM SM SM YP 8 DESCRIPTION WHEEL AND TIRE ASSEMBLY, Rear, 22 x 0-8 WHEEL AND TIRE ASSEMBLY, Front, 4.4 x 6 SPACER, Axle, Rear PM Hunter KEY, Parallel PLN.87 x.87 x 3.0 STL HUB CAP WASHER, 2-/2 RING, Klipring EXT For.75 Dia Shaft blk WASHER, -5/8 WASHER, 3/4 WASHER, 3/4 Footnotes 33

34 Decal Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

35 Decal Group REF NO PART NO. QTY YP SM YP SM SM YP YP YP YP YP YP 2 DESCRIPTION DECAL, Steering Wheel DECAL, Tunnel Cover Warnings, Export DECAL, Fuel Level DECAL, Hydro Release DECAL, Ignition Switch Symbols DECAL, Noise DECAL, Safety DECAL, Model DECAL, 02cm DECAL, Logo DECAL, Performer Footnotes 35

36 Collector Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

37 Collector Group REF NO PART NO. QTY YP YP YP YP YP YP YP YP YP DYP 73596YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP 6 DESCRIPTION FRAME, Top TUBE, Front BRACE TUBE, Bottom TUBE, Connecting REINFORCEMENT, Left REINFORCEMENT, Right HANDLE, Full COAT, Fabric TOP, Collector LEVER, Dumping HANDLE, Rubber BOLT, M5 x 2 BOLT, M5 x 6 PLUG, Plastic BOLT, M5 x 30 BOLT, M5 x 35 WASHER, 0.5 WASHER, Lock 0 NUT, M0 BOLT, M8 x 20 WASHER, 8.4 WASHER, Lock 8 NUT, M8 WASHER, 5.3 NUT, M5 BOLT, M5 x 25 SPRING, Flat REINFORCEMENT, EMENT, Top SCREW, 6.3 x 32 Footnotes 37

38 Back Plate Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

39 Back Plate Group REF NO PART NO. QTY YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP5YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP YP SM 6 DESCRIPTION TUNNEL BACKPLATE BRACE HOLDER, Back Plate, L.H. HOLDER, Back Plate, R.H. HOLDER, Collector, R.H. HOLDER, Collector, L.H. HITCH SWITCH, Full Collector TIE ROD, Bypass TIE ROD, Latch LATCH COVER, Switch PAD, Rubber TRANSITION PART SPRING, Collector Lock HOLDER, Adjustable, R.H. HOLDER, Adjustable, L.H. RUBBER EDGE CAPSCREW, Self Tap, 5,5 x 9 CAPSCREW, Self Tap, 4.2 x 9.5 BOLT, M2 x 30 NUT, M2 WASHER, 3 WASHER, 2 BOLT, M8 x 25 DIN NUT, M8 WASHER, 8.4 WASHER, 8 NUT, M8 CAPSCREW, M8 x 40 BOLT, M5 x 6 NUT, M5 WASHER, 5.3 BOLT, M5 x 6 NUT, M5 SPINDLE BOLT, M4 x 6 WASHER, 4.3 NUT, M4 PAD, Steel WASHER, 8,4 CAPSCREW, Hex Washer Head, Taptite, 5/6-8 x 5/8 Footnotes 39

40 French Guard Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

41 French Guard Group REF NO PART NO. QTY YP YP YP YP YP YP YP YP YP YP YP 2 DESCRIPTION COVER, Clutch COVER, Mower Deck COVER, Roller, L.H. COVER, Roller, R.H. COVER, Side BOLT, M5 x 2 WASHER, 5.3 NUT, M5 CAPSCREW, Self Tap, 5,5 x 9 HOUSING PIN Footnotes 4

42 40" Mower Deck - Belt & Idler Arm Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

40" Mower Deck - Belt & Idler Arm Group REF NO PART NO. QTY.

735846YP WASHER, Zinc, 9 27.2 735799YP 2 NUT, M8 28 73578YP 2 PULLEY, Belt 28 Z 3. 735837YP 2 WASHER, 3 3.

2 735796YP NUT, M2 34 735804YP REINFORCEMENT 35 735805YP REINFORCEMENT 36. 73588YP SCREW, M8 x 25 36.

2 735837YP 2 WASHER, 3 38.3 735839YP 2 WASHER, 8.4 38.4 73580YP 2 NUT, M8 39.

Complete 44 735826YP STUD, 0-932-263263 45 7358YP ROLLER, W 3500-372372 46 737369YP FOOTING 47.

43 40" Mower Deck - Belt & Idler Arm Group REF NO PART NO. QTY. DESCRIPTION YP COVER, Plastic YP MAIN BOARD YP FOOTING, Complete YP WASHER, Zinc, YP 2 NUT, M YP 2 PULLEY, Belt 28 Z YP 2 WASHER, YP 4 NUT, M YP WASHER YP 2 PULLEY, Belt YP WASHER, YP NUT, M YP REINFORCEMENT YP REINFORCEMENT YP SCREW, M8 x YP NUT, M YP STUD YPYP WASHER YP 2 SCREW, Zinc M8 x YP 2 WASHER, YP 2 WASHER, YP 2 NUT, M YP 6 SCREW, M8 x YP 6 NUT, M YP 2 SCREW, M6 x YP 6 WASHER, Zinc, YP BELT, Two Side Tooth K+K20DS YP V-BELT, Li, BBT, 7 x YP HOLDER, Complete YP STUD, YP ROLLER, W YP FOOTING YP WASHER, Zinc, YP WASHER, YP NUT, M YP 2 NUT, M YP SCREW, M8 x ZN DIN YP WASHER, YP WASHER, YP PULLEY, Belt , Complete YP WASHER, YP NUT, M2 Footnotes 43

44 40" Mower Deck - Belt & Idler Arm Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

45 40" Mower Deck - Belt & Idler Arm Group REF NO PART NO. QTY. DESCRIPTION YP SCREW, M 8 x YP WASHER, YP WASHER, YP REINFORCEMENT YP COVER, Pulley, Belt YP 2 WASHER, Zinc, YP 2 NUT, M YP SPRING, Footnotes 45

46 40" Mower Deck - Housing, Hitch, Arbors & Blade Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart

40" Mower Deck - Housing, Hitch, Arbors & Blade Group REF NO PART NO. QTY. DESCRIPTION 737368YP MOWER DECK, Complete 2. 73579YP 2 HOUSING 2.

47 40" Mower Deck - Housing, Hitch, Arbors & Blade Group REF NO PART NO. QTY. DESCRIPTION YP MOWER DECK, Complete YP 2 HOUSING YP 2 REINFORCEMENT YP 4 BEARING, RS C 66IB YP 6 SCREW, M8 x YP 6 WASHER, YP 6 NUT, M YP SHAFT YP TONGUE, 6 H 9 x 6 x YP 2 TONGUE, 6 H 9 x 6 x YP SHAFT YP TONGUE, 6 H 9 x 6 x YP 2 RING, Safety YP 2 HOUSING YP 4 SHEAR STUD, YP BLADE, Right Rotary YP BLADE, Left Rotary YP5YP SCREW, M0, YP 2 WASHER, YP 2 WASHER, BN x 6.3 x 2 x YP SCREW, M0, Left Thread YP 2 QUICK FASTENER, YP 2 RING, 3 x 2 NBR YP 2 NUT, M YP 4 CUTTING WHEEL, Right ETOP YP 4 SCREW, M8 x YP 4 NUT, M YP HINGE, Front YP 2 MOWING STUD, YP 4 PIN, Flexible YP 2 BOLT, M2 x YP 2 NUT, M2 Footnotes 47

Hardware Identification & Torque Specifications Torque Specification Chart

6 Class 5.6 8.8 0.9 2.9 Class 8.8 Class 0.9 Class 2.

88.56 3.44.28 9.2.80 22.92 2.5 M4 3.44.28 30.72 2.90 43.44 4.0 52.56 4.

2 7 03 40 M4 42 58 0 32 36 85 62 220 M6 64 88 47 200 20 285 250 340 M8 89 2

559 745 656 890 M24 27 295 497 375 708 960 840 40 M27 320 435 733 995 032

2278 3090 M36 759 030 740 2360 244 330 2935 3980 M39 988 340 2249 3050 363

/4 /2 3/4 50 60 Thread Diameter (mm) Body Diameter 2 Screw, /2-6 x 2 /4 /2

25 x 25 Threads per inch Body Length Distance between threads (mm) Threads

Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware

in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 9 2. 30 3.4 4 4.

7 /4-20 66 7.6 8 0.9 2 6.3 /4-28 76 8.6 0 3.6 4 9.0 5/6-8 5.0 7 23. 25 34.

3 35 47.6 50 68.0 7/6-4 30 40.8 50 68.0 70 95.2 7/6-20 35 47.6 55 74.8 80 08.

4 0 49.6 50 204.0 9/6-8 75 02.0 20 63.2 70 23.2 5/8-90 22.4 50 204.0 220 299.

0 3/4-6 80 244.8 300 408.0 420 57.2 7/8-9 40 90.4 400 544.0 600 86.

0-2 240 326.4 640 870.4,000,360.0 NOTES.

self-tapping screws, thread forming screws, sheet metal screws and socket

for prevailing torque locknuts - use 65% of grade 5 torques. b.

49 Hardware Identification & Torque Specifications Torque Specification Chart FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%) Property Class 5.6 Class Class 8.8 Class 0.9 Class 2.9 Size Of in/lbs in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. M M M M M M M M M M M M M M M M M M M The guides and ruler furnished below are designed to help you select the appropriate hardware Thread Diameter (mm) Inside Diameter (in) Nut, /2-6 /4 /2 3/ /4 /2 3/ Thread Diameter (mm) Body Diameter 2 Screw, /2-6 x 2 /4 /2 3/ Body Diameter Nut, M8 Screw, M8-.25 x 25 Threads per inch Body Length Distance between threads (mm) Threads per inch /4 /2 3/4 Body Length (mm) Body Length (in) 4 Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade No Marks SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm / / / / / / / / / / / / / / / / / / , ,000,360.0 NOTES. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 35% of grade 5 torques. 3. Unless s otherwise noted on assembly drawings, all torque values must meet this specification. Common Hardware Types Hex Head Capscrew Washer Standard Hardware Sizing When a washer or nut is identified as /2 (M8), this is the Nominal size, meaning the inside diameter is /2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads). Carriage Bolt Wrench & Fastener Size Guide Lockwasher Hex Nut When bolt or capscrew is identified as /2-6 x 2 (M x 50 ), this means the Nominal size, or body diameter is /2 inch (8mm metric thread diameter), the second number,6, represents the threads per inch, (.25 thread diameter). The final number is the body length of the bolt or screw, 2 inches (50mm). /4 Bolt or Nut Wrench 7/6 M6 Bolt or Nut Wrench 0mm 5/6 Bolt or Nut Wrench /2 M8 Bolt or Nut Wrench 3mm 3/8 Bolt or Nut Wrench 9/6 M0 Bolt or Nut Wrench 7mm 7/6 Bolt or Nut Wrench (Bolt) 5/8 Wrench (Nut) /6 M2 Bolt or Nut Wrench 9mm /2 Bolt or Nut Wrench 3/4 M4 Bolt or Nut Wrench 22 mm

Reproduction. Not for EUROPEAN LAWN TRACTOR ELECTRIC CLUTCH HYDRO DRIVE RMO RD SERIES. Parts Manual for

Reproduction. Not for EUROPEAN LAWN TRACTOR ELECTRIC CLUTCH HYDRO DRIVE RMO RD SERIES. Parts Manual for Parts Manual for EUROPEAN LAWN TRACTOR ELECTRIC CLUTCH HYDRO DRIVE RMO RD SERIES Model No. Description 2691070 ELT2040RD 2691071 ELT2040RDF 2691072 ELT2440RD 2691073 ELT2440RDF Briggs & Stratton Yard Power