DP-N. DP-N Series Two-platen Injection Molding Machine. ( US Tons) YIZUMI-HPM CORPORATION. Address: 1193 Pole Lane Road Marion, OH 43302
|
|
- Darcy Simon
- 5 years ago
- Views:
Transcription
1 DP-N DP-N Series wo-platen Injection Moldg Mache (99-35 US ons) YIZUMI-HPM CORPORION ddress: 1193 Pole ane Road Marion, OH 4332 el: 地 : 广东省佛山市顺德区大良顺昌路 - Fax: Website: 号 E: sales@achery.com 515(overseas)
2 We Walk longside he World DP-N Series wo-platen Injection Moldg Mache bout Yizumi-HPM Corporation DP-N Series wo-platen Injection Moldg Mache Yizumi-HPM's cost-effective two-platen jection moldg mache not only brgs high productivity for jection moldg production, but also higher return on use value to customers through stable performance and high product quality. DP-N series is your trustworthy better choice the long term. Yizumi-HPM Corporation Yizumi Headquarters Yizumi-HPM eam Yizumi Shunde(Wusha)Production Base Yizumi Suzhou(Wujiang)Production Base hree Value Propositions Yizumi-HPM Corporation; Manufacturer of high quality hybrid jection moldg machery from 6 to 35 tons, and hot and cold chamber die castg machery from 2 to 45 tons. HPM has been supplyg jection moldg machery and support services to the plastic dustry sce 1931, and has thousands of Injection Moldg and Die Castg Maches operation throughout North merica. HPM Company was corporated 177 as the Hydraulic Press Manufacturg Company Mount Gilead, Ohio, with the purpose to design and build hydraulic presses for the extraction of apple cider. hrough the sales efforts of its founders, the company marketed its products to most fruit-growg areas the United States and Canada, gag credibility primarily through word-of-mouth advertisg. HPM started to manufacture hydraulic presses that were used a number of markets, cludg textiles, railroads, and food processg. In March of 211, YIZUMI Precision Machery Co., td, located Cha, acquired all HPM tellectual properties. Shortly after the purchase, HPM North merica Corporation was set up Marion, Ohio. In 217 HPM North merica changed its name to Yizumi-HPM Corporation to be representative of the formidable ternational company that we are a part of today. Precision & Stability High-response servo valve control technology and ultrasonic displacement sensor are applied to mold closg and openg, with accurate position control and mold-open repeatability up to ±.1. Fully-closed-loop control of the jection and hold ( and velocity) stages, numerically-controlled proportional back and part repeatability 3. High Efficiency & Energy Savg Clampg unit is highly rigid. here is no contact and frictional resistance between the movable platen and tie s so that motion becomes faster. With the diagonally-positioned high-speed cylders, four short-stroke high- cylders and synchronous lockg nut mechanism, mold closg and closg and generation of clampg force happen less time and dry cycle becomes very short, reducg cycle time and improvg productive efficiency by 22%. he high-performance Ecoservo drive and piston variable pump system can provide and flow as needed and has merits of strong power and fast response, consumg 56% less energy than traditional drive systems. Yizumi-HPM Corporation sells and manufactures jection moldg maches and die castg maches based upon the HPM designs but utilizg the engeerg, manufacturg and fancial strengths of YIZUMI. It is not only the service and technical center of YIZUMI North merica; it s also a very important step of the globalization strategy of the company. I hope with further global operation of HPM and YIZUMI brands, we can provide our customers worldwide with our best products and services. - Richard Yan, CEO of Yizumi Special Processes Based on Germany modular design and excellent equipment structure, a variety of special processes solutions, such as jection compression moldg (ICM) technology, FoamPro microcellular foam technology, precision mold-open technology, secondary mold-close technology, carbon fiber-based lightweightg technology, long glass fiber (GF) jection moldg technology and multi-material micro jection moldg technology are available. 1 2
3 We Walk longside he World DP-N Series wo-platen Injection Moldg Mache Modular Design Precise, Efficient, Energy-savg High-rigidity platen and precise mold openg Box-shape platen is designed for high rigidity and high parallelism. Mold closg and openg are controlled by high-response servo valve with mold-open repeatability up to ±.1. Higher efficiency With further optimized clampg unit, mold closg and openg and generation of clampg force happen shorter time and dry cycle time (EUROMP 6, dry cycle time of UN1DP up to 4.1sec) is reduced, with productive efficiency up by 22%. More reliable and stable clampg unit he high- clampg cylder, parallel lockg nut mechanism and tie s are made of high-quality materials and subject to special technical processg so that they are durable and reliable. ie s are designed with uniform stress distribution, which ensures the clampg unit works reliably and stably. Better jection precision Double parallel cylders and patented dual proportional closed-loop control technology are applied to jection, with high jection repeatability and repeatability of part weight 3. ower energy consumption Steadier mold support he movg platen is supported by extended rigid slidg shoes with the function of tilt adjustment and -shape guide design, providg steady support and precise guidance for the mold. Professional control system ustria s KEB controller works faster and it is powerful enough to offer a variety of control software solutions for special processes. More accurate position control Measurement of stroke is performed by the ultrasonic displacement sensor which is resistant to terference and durable, with accuracy up to.1%/f.s. High-performance Ecoservo drive technology, a standard feature for the DP series, is tegrated with the piston variable pump system to offer strong power and fast response, resultg 56% less energy consumption. Data above are reference criteria for factory test. 3 4
4 We Walk longside he World DP-N Series wo-platen Injection Moldg Mache DP-N Series wo-platen Injection Moldg Mache Offer You Multiple Solutions Injection Unit Model UN99DP-N UN12DP-N UN165DP-N UN2DP-N UN25DP-N UN3DP-N UN35DP-N *Calculation of jection unit model based on ternational standards: shot volume [cm ] max. jection []/1 *arger platens are optional (see specifications). pplication Examples Car grille Car light Bumper Washg mache tub V frame ir conditioner panel Plastic pallet Rubbish b 5 6
5 We Walk longside he World Clampg Unit High-rigidity platens are designed as box structures with high degree of parallelism, large space between tie s, large mold thickness and long mold-open stroke. Mold closg and openg are controlled by high-response and high-speed proportional valves, with mold openg repeatability up to ±.1. Diagonally-positioned high-speed cylders enable mold closg and openg to be faster and effectively shorten dry cycle. Clampg force is quickly generated thanks to the synchronous lockg nut mechanism and four short-stroke high- cylders. DP-N Series wo-platen Injection Moldg Mache ① No contact between tie s and movable platen ② High- mold openg High- cylders offer large mold openg force, which solves the problem of difficult mold openg the production of deep-cavity parts. ③ Synchronous lockg nut mechanism ④ Highly-rigid extended platen supports ⑤ Safety foot plates ⑥ Open ejector mechanism ⑦ utomatic tie retraction Compact two-platen clamp unit saves space by 2%. UN25DP-N No frictional resistance, faster mold openg and closg, no need of tie lubrication and clean mold area without oil sta. ① he fast, reliable and durable synchronous lockg nut mechanism is driven by patented impact-cushiong cylders and performs movements accurately. he movg platen is supported by exceptionally long, rigid slidg shoes with the function of tilt adjustment and -shape guide design, providg steady support and precise guidance for large molds. arge areas of safety foot plates that harbor no oil or water are mounted the areas of front and rear safety gates and mold. Separate safety switches are co n n e cte d to t h e co n t ro l l e r fo r s a fet y, co m p l ete l y co n fo r m i n g to GB national safety standard. he open double-cylder ejector mechanism is easy to stall and mata. Ejection synchronized with mold openg and forced ejector-backward are available. he automatic tie retraction function is optional and designed with stability and reliability. It can remove the restriction of factory ceilg height. ② ③ ④ ⑤ ⑥ ⑦ 7
6 We Walk longside he World DP-N Series wo-platen Injection Moldg Mache Injection Unit hanks to modular design, each clampg unit can be combed with different jection units to meet diversified needs of jection moldg applications. Combation of advanced drive technology and further optimized plasticizg unit brgs better plasticizg effect, so that moldg of precision parts is no longer difficult. Carriage supports and lear guide rails 1 High-rigidity carriage supports and double-deck guide rails are designed with low resistance and ensure high jection precision. 2 Ultrasonic digital displacement sensor Injection and jection carriages are equipped with ultrasonic displacement sensors which are resistant to terference and durable, with measurement accuracy up to.1%/f.s. 3 Quick rel change mechanism Double-parallel-cylder jection, fully-closed-loop control of the jection and hold ( and velocity) stages, numerically-controlled proportional back and stable jection end position ensure part repeatability is less than or equal to 3. Ceramic heater bands are used for rel heatg and it is under self-tung PID temperature control performed by ustria s KEB controller, with control accuracy up to±.5. he heater bands have long service life and low energy consumption. Specialized bi-metallic rel assembly resistant to wear and corrosion is optional to meet requirements of different materials. 4 Barrel is mounted with a press plate. he jection unit and rel assembly are detachable as a whole, which greatly shortens the rel unit replacement time. Injection carriage cylder wo jection carriages are parallel located. he universal couplg used for connection ensures stable nozzle contact and no plastic leak
7 1 Precision filtration and coolg system he hydraulic system cludes Germany s HYDC low- oil filter and coolg system, with separate filtration and coolg. Filter feness up to 5μm ensures clean hydraulic circuit, stable oil temperature and reliable, durable hydraulic components. 2 Humanized design he cabet of the drive unit is designed with -shape covers available to opened, which is matenance-friendly. 3 Fast response With the use of advanced Ecoservo drive technology, the system response time is only 5ms. 4 Strong power he power system employs Italy s branded servo motor and imported piston variable pump, with fast response, high overload capacity, double energy savgs and energy consumption reduction up to 56% Given oil 3. 3Oil feedback Set speed(rpm) Set speed(rpm) Hydraulic System he excellent performance of DP -N series benefits from the high-performance Ecoservo drive technology and the piston variable pump, which has strong power, fast response, little ternal leak and significant energy savgs. he drive system and jection unit will be matched the form of modules so as to customize the power for mache and mimize energy loss. Mold openg durg plasticizg, ejection or core pullg is a standard feature that reduces cycle time. Data above are reference criterions for factory tests
8 We Walk longside he World DP-N Series wo-platen Injection Moldg Mache Control System DP-N series employs ustria s KEB control system with user-friendly terface and higher processg speed. It is also powerful and capable of providg multiple control software solutions for special processes. 1 2'' F color touch screen, visualized graphic parameter settg, actual parameter values recorded and displayed with curves, more accurate onle process analysis Free prograg is available to meet the needs of special molds and processes. he sequence of mache movements also can be freely edited. Extensible I/O modules can tegrate with more functions, cludg temperature control and sequence valve as needed. Counication ports for prter, auxiliary equipment and automation. Professional control system Powerful and accurate control Quick process parameters settg and easy operation Mold closg settgs Injection curve Stable, fast and accurate control Data and safety Double-CPU control, 1ms of scan cycle, faster response and high Storage of process data without limit reliability Memory of alarm and process parameter Real-time accurate control of mold closg and openg and jection change by the telligent high-response closed-loop controller Process quality control (PDP), statistical process control (SPC) and data export Multi-level user access ensurg data safety, Easy to operate multiple protections of equipment and Networked remote control operator through software and hardware Onle conversion of multiple languages and units Multiple means of quick put, such as graph and virtual keyboard Easy and convenient process parameter settg Production process data control Sequence of mache movements 13 14
9 We Walk longside he World DP-N Series wo-platen Injection Moldg Mache High- mold openg Mold openg driven by high- cylders with large openg force Solution to difficult mold-open the manufacture of deep-cavity parts DP-N Series wo-platen Injection Moldg Mache Special Processes pplied to production of deep-cavity parts, cludg washg mache drum, rubbish b and storage box With the use of rigorous and novative Germany processes, DP-N series gives every material distctive properties and provides new ideas of application and efficient, telligent material combations. Yizumi-Hpm is coitted to becomg a leader Cha s jection moldg mache dustry and provide you with cost-savg jection moldg solutions and the best vestment return. ow- jection moldg technology echnical pots: Injection compression moldg (ICM) function SmartClamp technology realizes automatic calibration of platen parallelism, with response accuracy up to ±.15/2ms. FoamPro microcellular foam technology Secondary mold closg Mold closg for the second time with larger Effectively prevent possible ternal stress molded parts and air trap Improve the accuracy and appearance quality of molded parts for higher QC passg rate For automotive applications, such as car lights and applications household appliances dustry Molded part repeatability echnical pots: SmartClamp technology lternative temperature technology () ircraft alumum mold technology FEXflow servo-driven hot runner system Part quality/g est part: automotive lampshade Repeatability Without secondary mold closg :.725% With secondary mold closg:.715% imes Without secondary mold closg With secondary mold closg Data above are reference criteria for factory test
10 We Walk longside he World DP-N Series wo-platen Injection Moldg Mache Carbon fiber moldg Carbon fiber has been widely used passenger cars. he greatest advantage of carbon fiber as an automotive material is light and strong, which will facilitate breakthroughs automotive lightweightg and brg a social benefit: energy savg. In the future, high carbon fiber will become creasgly popular. Reaction technology HP-RM (high- res transfer moldg), completed with the use of preform, steel mold, vacuum-aided exhaust, high- jection and high, thermoset composites impregnation and solidification technologies Insitu polymerization technology Injection moldg technology Carbon fiber composite preform Processes such as heatg, press formg, back jection and trig of preform echnology of multi-material micro jection moldg via second jection unit Higher added value of molded part Enhanced mechanical property of molded part Better appearance of molded part Improved productive efficiency ess vestment cost echnical pots: ccurate horizontal rotator positiong and control technology Spray pated part surface replaced by high-gloss appearance 17 1
11 We Walk longside he World Standard and Optional Features Ma Part ist (Standard) Part Name Control system Servo motor Piston variable pump Servo valve Proportional valve Key control valve Pressure sensor Ultrasonic digital displacement sensor (non-contact) Seal Hydraulic motor ow- oil filter Oil cooler Suction filter Barrel assembly ie ie lockg nut Clampg piston Servo drive Solid-state relay utomatic switch ir switch Position limit switch Proximity switch C contactor DFOCK self-lockg nut Brand / Specifications KEB PHSE Rexroth/YUKEN Rexroth Rexroth Rexroth/YUKEN Danfoss MS SKF SFF/HGGUNDS HYDC HYDC Rexroth N SR/Huaye GENER&GENESIS GENER&GENESIS GENER&GENESIS Inovance KUDOM BB FUJI SCHMERS/Schneider/Panasonic UONICS FUJI DF Place of Brand ustria Italy Germany / Japan Germany Germany Germany / Japan Germany / Italy merica Sweden Brita / Sweden Germany Germany Germany aiwan / Cha aiwan aiwan aiwan Cha Brita Switzerland Japan Germany/ France/ Japan Korea Japan merica Standard Optional Standard Optional Clampg Unit - Bi-alloy rel - Heat preservation cover for rel and safety nozzle cover (with electrical protection) - Simultaneous ejector or core-pull movements - SPI ejector p hole - High-accuracy ultrasonic displacement sensor measurg stroke of jection, plasticizg and carriage - Clampg mechanism with tie s dependent of movg platen - 1-stage jection speed/ / position control - High-rigidity clampg frame - 1-stage jection speed/ / position control - Quantitative volumetric automatic lubrication system - 1-stage holdg speed/ / position/ time control - High-response servo control of and flow for mold openg and closg - Open ejection mechanism hydraulically-driven by double parallel cylders - 5-stage plasticizg speed/ / position control - Selectable suck-back before or after plasticizg - High-accuracy ultrasonic displacement sensor measurg stroke of tie s, mold openg and closg and ejection - ear guides for jection carriage - High-rigidity box-shape platen - ear guides for jection - ow- mold protection - Double-deck jection unit - Electrically-protected safety foot plates of mold area and safety gates - Double carriage cylders - Protective cover of jection unit -One-button automatic mold adjustment - Clampg force adjustment as needed - Screw cold start protection - Ejection/ tie reset/ plasticizg/ core pullg durg mold openg - Suck back function - Robot mountg hole as per EUROMP 1 - utomatic material cleang - Fixed platen with solid slidg bearg - Manual central lubrication system of jection unit - Platen with -slot and mold mountg hole - Dual-cycle coolg water for feed openg - Slidg support with steel-base copper alloy lubricatg bearg - Ceramic heater band - Hardened sprg steel strips and guide rails - Screw rotation measurg device - Four platens made of high-rigidity ductile iron - iftg and change of the whole rel assembly - Hydraulic and electrical safety devices - Mountg terface for hopper loadg platform - Secondary mold closg - Extended nozzle (5/1/15/2 longer) - ow- jection moldg - Mixg screw - Forced return of ma ejector p - Bi-metallic screw - Protective plate mold area - Swivel jection unit - SPI mold locatg rg - Special screw components - Quick mold change system - Barrel heat-retag energy-savg device (silicone cover) - Hydraulic mold clamp - Sprg shut-off nozzle - Magnetic platen - Increased jection stroke - Safety mechanical lock device - Servo jection system - Heat sulatg plate of mold - Nitrogen jection system - Special mold mountg hole - Special low- jection moldg system - Increased mold openg stroke - MuCell system - Increased mold thickness - System dedicated to UPVC pipe fittg - Increased ejector stroke - ccumulator system for large shot volume production - arger ejection force - Hopper loadg platform - Mold-open cylders exchange - uxiliary ladder - utomatic tie retraction (upper tie s optional) -Hopper slidg device - Ejector-backward protection switch - Enlarged plasticizg motor - adder for matenance of fixed platen - Second jection unit for micro jection moldg - Central water pan Hydraulic System - Staless steel material receivg pan - sets of hydraulic sequence valve (bi-directional) - (Rear, lower) mold-open cylder safety cover Electrical Control System - CE certified - Voltage: 46V/3Ph/6Hz - 16 sets of put/output pots reserved - PID closed-loop control of rel and nozzle temperature - Manual, semi-auto and fully-auto operatg mode - Input and output spection terface - utomatic display of alarm messages and acousto-optic alarm system - Built- software with the oscilloscope function - Unlimited technical parameter storage - Chese and English operatg system - Safety gate emergency stop function - Onle cycle monitorg - 12"F color touch screen - Visualized graphic prograg - PDP terface - uto-protection of jection monitorg - uto-protection of mold closg monitorg - Statistical process control (SPC) terface - Electrical enclosure rated IP54 - Screw speed detectg device - High-performance servo pump system - Real-time display of the of power unit via sensor - High-precision low- oil filter - Imported-brand hydraulic valve - ow-noise energy-savg hydraulic circuit - Proportional back control for plasticizg - Proportional control of jection - Reliable hydraulic pipg - Modular combation of power - Oil pre-heatg system - Oil level monitorg and alarm - Openable protective cover of pump motor - 4 sets of electrical connectors of core puller/ unscrewg devices. 2 sets each on the fixed platen and moveable platen - Differential mold openg circuit - Injection and mold-close protection - High- mold openg - Precision dependent filtration and coolg systems - utomatic and flow calibration - Imported branded seal - utomatic oil temperature spection and alarm - Panel cooler and automatic coolg pump - ime/ position/ time + position control modes for switchover to holdg - 6 sets of sequence (jection ) valve terface - 3 sets of 3V 32 socket - 1 set of 3V 16 socket - 1 set of multi-function 22V socket - 16-level password security - EUROMP 12 robot terfaces - Closed-loop proportional variable displacement pump system - Variable displacement pump system - High-response accumulatg servo jection system - Enlarged oil cooler - Enlarged multi-capacity pump motor - utomatic heat preservg, automatic heatg and group heatg settgs - Closed loop servo control of jection, plasticizg, holdg and back - Phase sequence protection - Plasticizg durg mold openg (quick plasticizg) - Oil cleanless monitorg - Multiple sets of electrical connectors of core puller or unscrewg devices (optional, creasable ) - Warng or motor switch-off due to steppg on safety foot plate - ir blast (one set on fixed platen and one set on movg platen) - Robot terfaces based on EUROMP 67 - Electric unscrewg device - Hot runner control system - uxiliary emergency stop - Electric unscrewg device terface - Central (networked) monitorg system - Protective light grid of safety gates - Opto-electronic safety switch of front and rear safety gates - Protective light grid of central safety foot plate - Safety switch for front safety door edge - KEB 5 control system Injection Unit - Double-cylder jection system - Core puller relief - Gate relief - Quick connector for core puller and hydraulic gate - Independent hydraulic gate control system Other - Operation Manual - djustable levelg pad - 4 sets of liftg rgs - Staless steel hopper - Glass-tube coolg water flowmeter - Mold clamp - Mold temperature controller - utomatic loader - Dehumidification dryer - Other auxiliary equipment - ow-speed high-torque hydraulic motor Standard feature Optional feature 19 2
12 9.45 UN99DP-N Mache Dimensions Model UN4/UN99DP-N UN615/UN99DP-N UN9/UN99DP-N UN25/UN99DP-N Coolg water let/outlet for movg mold halves UN99DP-N Platen Dimensions Ø Ø2.2 H1 H2 W Sectional area of ma power cord Coolg water let/outlet for fixed mold halves Full-load current Bearg capacity of foundation t/m M24, 4 deep() Robot mountg holes accordg to Euromap 1/E16 M24, 4 deep() Number of coolg water le port / 2 n /m n gal/m Coolg water flow (mold excluded) /m Water let/outlet for oil cooler gal/m Power port MX.3.6 MX MX Ø9.4H7 Coolg water SR.59 Ø9.4H7 3~4 43.5~5 Coolg water W MIN MIN.24.4 H1 H2 5~6 72.5~ echnical Specifications of UN99DP-N UN99DP-N DESCRIPION UNI Injection Unit Screw diameter heoretical shot volume cu cm Shot weight oz g Injection Screw :D ratio Injection rate cu /s cm 3 /s Max. jection speed /s /s Screw stroke Max. screw speed r/m Screw torque Nm Plasticizg rate(ps) oz/s g/s Heatg capacity Barrel heatg zone number Nozzle contact force Carriage stroke CMPING UNI clampg force 9/112 /9 Openg stroke 5 76 platen size 69.9x x1655 space between tie-s 46.45x x12 mold thickness max.openg stroke max.daylight ejector force ejector stroke ejector number 17 system motor pump flow total power oil tank capacity dry cycle max.mold weight mache weight (clampg+ jection units,no oil) mache dimensions gal/m /m gal S/ S/ m Electrical & Hydraulic Units General / / /26 4./ Dry cycle time accords with EUROMP 6. 2.he load-bearg capacity of the movg platen is 2/3 of the total mold weight. 3.he shot weight is calculated by GPPS and it is.92 times of the theoretical shot volume. 4.he jection unit data are ternational units and calculated as follows: theoretical shot volume[ cm ³] jection [Mpa]/1 5.Plasticizg capacity is calculated by GPPS ( for the jection unit model 15 and smaller ones ) or PP ( for jection unit above model 15 ). 6.Because of constant technical improvement, the mache specifications are subject to change without notice / / / /
13 94 UN12DP-N Mache Dimensions UN12DP-N Platen Dimensions Model H1 H2 W UN615/UN12DP-N UN9/UN12DP-N UN125/UN12DP-N UN15/UN12DP-N Robot mountg holes accordg to Euromap /E16 M24, 4 deep() 15. Ø2.2 Ø1.1 Coolg water let/outlet for movg mold halves Sectional area of ma power cord M24, 4 deep() Full-load current Coolg water let/outlet for fixed mold halves Bearg capacity of foundation t/m M24, 4 deep() 31.5 Robot mountg holes accordg to Euromap 1/E1 Number of coolg water le port / 2 n /m n gal/m Coolg water flow (mold excluded) /m Water let/outlet for oil cooler gal/m Power port MX MX MX Coolg water.9 Φ9.4H7 R.59 Φ9.4H7 3~4 43.5~5 H1 W H2 MIN Coolg water MIN ~6 72.5~7 1.7 echnical Specifications of UN12DP-N UN12DP-N DESCRIPION UNI Injection Unit Screw diameter heoretical shot volume cu cm Shot weight oz g Injection Screw :D ratio Injection rate cu /s cm 3 /s Max. jection speed /s /s Screw stroke Max. screw speed r/m Screw torque Nm Plasticizg rate(ps) oz/s g/s Heatg capacity Barrel heatg zone number 7 7 Nozzle contact force Carriage stroke CMPING UNI clampg force 1124/1237 1/11 Openg stroke 9 platen size 74.x x15 space between tie-s 51.57x x12 mold thickness max.openg stroke max.daylight ejector force ejector stroke ejector number 25 system motor pump flow total power oil tank capacity dry cycle max.mold weight mache weight (clampg+ jection units,no oil) mache dimensions gal/m /m gal S/ S/ m Electrical & Hydraulic Units General / /36.1 6/917 5./ Dry cycle time accords with EUROMP 6. 2.he load-bearg capacity of the movg platen is 2/3 of the total mold weight. 3.he shot weight is calculated by GPPS and it is.92 times of the theoretical shot volume. 4.he jection unit data are ternational units and calculated as follows: theoretical shot volume[ cm ³] jection [Mpa]/1 5.Plasticizg capacity is calculated by GPPS ( for the jection unit model 15 and smaller ones ) or PP ( for jection unit above model 15 ). 6.Because of constant technical improvement, the mache specifications are subject to change without notice / / / /
14 UN165DP-N Mache Dimensions UN165DP-N Platen Dimensions Model Ø2.2 Coolg water let/outlet for movg mold halves Ø1.1 H1 H2 W UN9/UN165DP-N UN125/UN165DP-N UN15/UN165DP-N UN15/UN165DP-N Sectional area of ma power cord M24, 4 deep() Full-load current Bearg capacity of foundation t/m Coolg water let/outlet for fixed mold halves M3, 6 deep() Robot mountg holes accordg to Euromap 1/E Number of coolg water le port / 2 n /m n gal/m Coolg water flow (mold excluded) /m gal/m Water let/outlet for oil cooler M X M X Coolg water.9 9.4H7 Power port MX ~4 43.5~5 M IN R H M IN Coolg water H1 W 5~6 72.5~7 H echnical Specifications of UN165DP-N UN165DP-N DESCRIPION UNI Injection Unit Screw diameter heoretical shot volume cu cm Shot weight oz g Injection Screw :D ratio Injection rate cu /s cm 3 /s Max. jection speed /s /s Screw stroke Max. screw speed r/m Screw torque Nm Plasticizg rate(ps) oz/s g/s Heatg capacity Barrel heatg zone number 7 1 Nozzle contact force Carriage stroke CMPING UNI clampg force 1462/167 13/15 Openg stroke platen size 92.13x x24 space between tie-s 6.63x x12 mold thickness 27.17x max.openg stroke max.daylight ejector force 34 3 ejector stroke ejector number 25 system motor pump flow total power oil tank capacity dry cycle max.mold weight mache weight (clampg+ jection units,no oil) mache dimensions gal/m /m gal S/ S/ m Electrical & Hydraulic Units General / / /17 6./ Dry cycle time accords with EUROMP 6. 2.he load-bearg capacity of the movg platen is 2/3 of the total mold weight. 3.he shot weight is calculated by GPPS and it is.92 times of the theoretical shot volume. 4.he jection unit data are ternational units and calculated as follows: theoretical shot volume[ cm ³] jection [Mpa]/1 5.Plasticizg capacity is calculated by GPPS ( for the jection unit model 15 and smaller ones ) or PP ( for jection unit above model 15 ). 6.Because of constant technical improvement, the mache specifications are subject to change without notice / / / /
15 UN2DP-N Mache Dimensions UN2DP-N Platen Dimensions Model Ø2.2 Coolg water let/outlet for movg mold halves H1 H2 W UN9/UN2DP-N UN125/UN2DP-N UN15/UN2DP-N UN23/UN2DP-N UN31/UN2DP-N Ø Sectional area of ma power cord M24, 4 deep() Full-load current Bearg capacity of foundation t/m Coolg water let/outlet for fixed mold halves 49.9 M3, 6 deep() Robot mountg holes accordg to Euromap 1/E Number of coolg water le port / 2 n /m n gal/m Coolg water flow (mold excluded) /m gal/m MX MX Coolg water Water let/outlet for oil cooler.9 9.4H7 Power port MX.64.7 MIN R H7 3~4 43.5~ MIN Coolg water H1 W 5~6 72.5~7 H echnical Specifications of UN2DP-N UN2DP-N DESCRIPION UNI Injection Unit Screw diameter heoretical shot volume cu cm Shot weight oz g Injection Screw :D ratio Injection rate cu /s cm 3 /s Max. jection speed /s /s Screw stroke Max. screw speed r/m Screw torque Nm Plasticizg rate(ps) oz/s g/s Heatg capacity Barrel heatg zone number Nozzle contact force Carriage stroke CMPING UNI clampg force 1912/21 17/15 Openg stroke platen size 14.72x x224 space between tie-s 73.62x x1425 mold thickness max.openg stroke max.daylight ejector force 34 3 ejector stroke ejector number 33 system motor pump flow total power oil tank capacity dry cycle max.mold weight mache weight (clampg+ jection units,no oil) mache dimensions gal/m /m gal S/ S/ m / / x165.35x x4.2x3.5 Electrical & Hydraulic Units General / / / / x165.35x x4.2x Dry cycle time accords with EUROMP 6. 2.he load-bearg capacity of the movg platen is 2/3 of the total mold weight. 3.he shot weight is calculated by GPPS and it is.92 times of the theoretical shot volume. 4.he jection unit data are ternational units and calculated as follows: theoretical shot volume[ cm ³] jection [Mpa]/1 5.Plasticizg capacity is calculated by GPPS ( for the jection unit model 15 and smaller ones ) or PP ( for jection unit above model 15 ). 6.Because of constant technical improvement, the mache specifications are subject to change without notice / / / /
16 UN25DP-N Mache Dimensions UN25DP-N Platen Dimensions 13.7 Model 9.4 Coolg water let/outlet for movg mold halves Ø H1 H2 W UN25/UN25DP-N UN15/UN25DP-N UN23/UN25DP-N UN31/UN25DP-N UN445/UN25DP-N M24, 4 deep() Sectional area of ma power cord Coolg water let/outlet for fixed mold halves Full-load current Bearg capacity of foundation t/m M3, 6 deep() Robot mountg holes accordg to Euromap 1/E Number of coolg water le port / 2 n /m n gal/m M X.15 MX Coolg water flow (mold excluded) /m Water let/outlet for oil cooler gal/m Power port H7 M X M IN R H7 Coolg water 3~4 43.5~5 H1 W H MIN Coolg water 5~6 72.5~ echnical Specifications of UN25DP-N DESCRIPION Screw diameter heoretical shot volume Shot weight Injection Screw :D ratio Injection rate Max. jection speed Screw stroke Max. screw speed Screw torque Plasticizg rate(ps) Heatg capacity Barrel heatg zone number Nozzle contact force Carriage stroke clampg force Openg stroke platen size space between tie-s mold thickness max.openg stroke max.daylight ejector force ejector stroke ejector number system motor pump flow total power oil tank capacity dry cycle max.mold weight mache weight (clampg+ jection units,no oil) mache dimensions UNI cu cm 3 oz g cu /s cm 3 /s /s /s r/m Nm oz/s g/s gal/m /m gal S/ S/ m UN25DP-N Injection Unit CMPING UNI 225/257 2/ / / Dry cycle time accords with EUROMP 6. 2.he load-bearg capacity of the movg platen is 2/3 of the total mold weight. 3.he shot weight is calculated by GPPS and it is.92 times of the theoretical shot volume. 4.he jection unit data are ternational units and calculated as follows: theoretical shot volume[ cm ³] jection [Mpa]/1 5.Plasticizg capacity is calculated by GPPS ( for the jection unit model 15 and smaller ones ) or PP ( for jection unit above model 15 ). 6.Because of constant technical improvement, the mache specifications are subject to change without notice. Electrical & Hydraulic Units General / / / / / /1414 1/1414 1/
17 echnical Specifications of UN3DP-N UN3DP-N UN3DP-N Mache Dimensions DESCRIPION Screw diameter heoretical shot volume UNI cu cm Injection Unit Coolg water let/outlet for movg mold halves Coolg water let/outlet for fixed mold halves Water let/outlet for oil cooler H1 W H2 Shot weight Injection Screw :D ratio Injection rate Max. jection speed Screw stroke Max. screw speed Screw torque Plasticizg rate(ps) Heatg capacity Barrel heatg zone number Nozzle contact force Carriage stroke clampg force oz g cu /s cm 3 /s /s /s r/m Nm oz/s g/s CMPING UNI 337/326 27/ Openg stroke Power port platen size UN3DP-N Platen Dimensions space between tie-s mold thickness max.openg stroke Ø Robot mountg holes accordg to Euromap 1/E22 M24, 4 deep() M3, 6 deep() 46.6 MX MX MX Φ12.4H7 R.94 Φ12.4H7 MIN MIN max.daylight ejector force ejector stroke ejector number system motor pump flow total power gal/m /m Electrical & Hydraulic Units General Model H1 H2 W UN15/UN3DP-N Sectional area of ma power cord Full-load current Bearg capacity of foundation t/m 2 Number of coolg water le port / 2 n /m n gal/m Coolg water flow (mold excluded) /m gal/m Coolg water Coolg water oil tank capacity dry cycle max.mold weight mache weight (clampg+ jection units,no oil) gal S/ S/ /6.7 12/ / / /6.7 11/ / / / / /6.7 1/ /6.7 1/ UN23/UN3DP-N UN31/UN3DP-N mache dimensions m UN445/UN3DP-N ~4 43.5~5 5~6 72.5~7 UN545/UN3DP-N UN5/UN3DP-N Dry cycle time accords with EUROMP 6. 2.he load-bearg capacity of the movg platen is 2/3 of the total mold weight. 3.he shot weight is calculated by GPPS and it is.92 times of the theoretical shot volume. 4.he jection unit data are ternational units and calculated as follows: theoretical shot volume[ cm ³] jection [Mpa]/1 UN1/UN3DP-N Plasticizg capacity is calculated by GPPS ( for the jection unit model 15 and smaller ones ) or PP ( for jection unit above model 15 ). 6.Because of constant technical improvement, the mache specifications are subject to change without notice
A5-N Series High-end Servo Injection Molding Machine
Designed by Yizumi March 2018 5-N Series High-end Servo Injection Moldg Mache New 5-N, Excellent s lways YIZUMI-HPM orporation 3424 State Route 309,Iberia, Ohio 43325 TEL: 740-382-5600 Email: sales@yizumi-hpm.com
More informationD1 Series Two-platen Injection Molding Machine
让中国装备技术与世界同步 WE WK ONGSIDE THE WORD Stock code: 300415 D1 Series Two-platen Injection Molding Machine ( 1T-2400T) Innovative Practice of arge-tonnage Two-platen Machine 广东伊之密精密机械股份有限公司 GUNGDONG YIZUMI
More informationD1 Series Two-platen Injection Molding Machine
让中国装备技术与世界同步 WE WALK ALONGSIDE THE WORLD Stock code: 3415 Designed by Yizumi in April 218 D1 Series Two-platen Injection Molding Machine ( 5T-24T) 广东伊之密精密注压科技有限公司 Guangdong Yizumi Precision Injection Molding
More information4,500-33,000 kn. Zhafir Jenius Series. ZHAFIR PLASTICS MACHINERY Jubatus-Allee Ebermannsdorf Germany
ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8 92263 Ebermannsdorf Germany contact@zhafir.com Zhafir Jenius Series Ningbo Zhafir Plastics Machinery Co.,Ltd Address: No.98, Guanhai Road, Chunxiao Town, Beilun
More informationSmart Future relies on LS.
Smart Future relies on LS. www.lsjection.com 1026-8 (5F). Joongsan B/D, Sanbon1-Dong Gunpo-Si, Gyeonggi-Do, 435-845, South Korea TEL. +82-31-450-3624 LS Mtron, U.S.A Sales Office & A/S Service Center.
More informationHaitian Jupiter JU/j Series
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD. Export Processing
More informationBT SERIES www.borchenorthamerica.com TABLE OF CONTENTS BT SERIES ENERGY EFFICIENT. DURABLE. PRECISE. COST EFFECTIVE COMPANY BACKGROUND...5 CUSTOMER SERVICE...6 FEATURES...8 MAJOR HYDRAULIC/ELECTRIC COMPONENTS...9
More informationEngel Injection Molding Machine VERTICAL CLAMP INSERT 330V/90 WP US. Data Sheet INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION
Engel Injection Molding Machine INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION CLAMP Clamp force US tons 90 Clamp opening force US tons 3.0 Clamp stroke (max.) inches 13.78 Mold height (min
More informationHaitian Saturn Series
PLASTICS MACHINERY Haitian Saturn Series HT 07001_GB Haitian International Co., Ltd Unit 1105 Metroplaza tower 2, 223 Hing Fong Road Kwai Fong N. T haitian@mail.haitian.com Haitian Partner: NINGBO HAITIAN
More informationSub title. PR series (Toggle type) Servo Hybrid system
Sub title PR series (Toggle type) Servo Hybrid system PR Series Feature Improved reproducibility and handling by excellent position sensor of mold close/open Outstanding injection molding for thin and
More informationAll Electric Servo Drive Vertical Type Injection Molding Machine. Specifications. (in U.S. Unit)
All Electric Servo Drive Vertical Type Injection Moldg Mache Specifications ( U.S. Unit) JT-AD SERIES Equipment Dimensions Rotary type Equipment dimensions Rotary type Mold related dimensions Through hole
More informationMAGNA T SERVO. 500 to 5,500 kn
MAGNA T SERVO 500 to 5,500 kn A NEW STANDARD IN TOGGLE TECHNOLOGY Energy Efficient, Rugged & Reliable, Precise & Consistent, Versatile & User Friendly MAGNA T SERVO TOGGLE INJECTION MOLDING MACHINE Durable
More informationHaitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN
More informationInjection Mould Machine
Injection Mould Machine PanAsia Exports (HK) Limited Room 1208-1209, B Block, Feng Xing Plaza, No. 242 Tian He Road, Tian He District, Guangzhou, 510620, China Tel: (8620) 28383510 Fax: (8620)28383516
More informationThe ROBUST Performer
80 to 910 Ton The ROBUST Performer Energy Efficient Generous Specifications Robust & Reliable User Friendly Control The ROBUST Performer 3 Large Ram Diameter Provides Uniform Force Distribution across
More informationHaitian Jupiter JU/j Series Specifications
Specifications HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD.
More informationToggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving
TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB Hydraulic TH Hydraulic TN Hydraulic & All electric TE All electric VH Vertical hydraulic
More informationSpecifications KN
Specifications 860-00 HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20170419-IV
More informationHaitian JupiterⅡ Series
Haitian JupiterⅡ Series HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 level 11 Metroplaza Tower 3 Hing fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY
More informationZhafir Venus Series. Specifications / International. Zhafir Venus. Series kN
Zhafir Venus Series Zhafir Venus Series Specifications / International 4-8000kN ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail:
More information80 ~ 350 Tons LGH-D Series
0 ~ 0 Tons LGH-D Series Featuring another technical innovation by LS The LGH-D Series, designed with LS s high technology, meets the demand for precision molding. Improved rigidity of the platen provides
More informationThe multi-function machine
The multi-function machine Technical Description Multi Clamping unit asic hydraulic 500 kn 800 kn 1100 kn 18,5 kw 22 kw 30 kw Injection unit/ Distance Screw between tie bars V V V 370 x 370 120 200 22/25/30
More informationSpecifications / International kN
ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail: contact@zhafir.com www.zhafir.com Zhafir Zeres Series NINGBO ZHAFIR PLASTICS
More informationDLseries. Compact Design. High Plasticizing Capacity. High Precision. Two Platen Direct Locking Type Injection Molding Machine
Two Platen Direct Locking Type Injection Molding Machine DLseries Compact Design High Plasticizing Capacity High Precision Machine series TB Hydraulic TH Hydraulic TN Hydraulic & ll electric TE ll electric
More information45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply
330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz 8 11 13 gm 226 312 368 Theoretical Disp in^3 15.3 19.4 24.0 cm^3 251 318 393
More informationZhafir VenusⅡ/p Series
Zhafir VenusⅡ/p Series Zhafir Venus Series Packaging / International 10-3800kN ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 963 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412-1 E-Mail:
More informationPARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationTH series Premium hydraulic injection molding machine
TH series Premium hydraulic injection molding machine Developed at WOOJIN PLAIMM's R&D center in Austria, TH series is designed to deliver the familiarity in design and performance of its European counterparts.
More informationBenefits and Selection Table
105 Benefits and Selection Table D-M-E s Internal Latch Lock Allows Precision Control of Mold Plate Latchg Operation D-M-E s unique ternally-mounted latch lock mechanism adapts a number of mold base sizes
More informationPLASTICS INJECTION MOLDING MACHINE
PLASTICS INJECTION MOLDING MACHINE MODEL VT - 60 VT - 80 VT - VT - 140 VT - 200 UNIT A B C A B C A B C A B C Screw Diameter 30 30 27 35 35 32 45 45 40 50 50 45 55 Screw L / D Ratio 18:01 18:01 20:01 18:01
More informationSaf-T-Gard Hydraulic Actuator MH 60 Series
Description Saf-T-Gard Hydraulic Actuator MH 60 Series for use with ", 4, 5 and 6" nomal gate valves The The Cameron MH Hydraulic Actuator product le has been developed by usg the superior features of
More informationMaquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons.
Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Mechanical feature Clamping: Minimizing mold strain by flexible fixed platen and highly rigid clamping structure with ultra capability of self lock.
More informationMMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines
Mitsubishi Heavy Industries Technical Review Vol. 49 No. 4 (December 2012) 23 MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines Mitsubishi Heavy Industries Plastic Technology
More informationYizumi-HPM Technical Center Iberia, Ohio. Link to Website
Yizumi-HPM Technical Center Iberia, Ohio Link to Website 1877 - HPM was incorporated as the Hydraulic Press Manufacturing Company in Mount Gilead, Ohio. The company built apple cider presses and continued
More informationHEAVY LIFTERS FOR MATERIAL HANDLING
HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars
More informationSpritzgiessautomaten. Innovative into the future. Data and Equipment
Spritzgiessautomaten Innovative into the future Data and Equipment Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY
More informationID-HM Series Minimum Space Less Hydraulic Oil Precise Molding
ID-HM Series Minimum Space Less Hydraulic Oil Precise Molding ID-HM Series ID-HM Series (Hydro-Mechanical Type) Hydro-mechanical injection molding machines provide FLEXIILITY, HIGH PRODUCTIVITY, and LOW
More informationHighsun. Create with most. professional high-speed plastic solution. Time to go global
Highsun Time to go global Create with most professional high-speed plastic solution LEADING ADVANTAGES 1 2 3 HIGHER-RIGIDITY & STRONGER MECHANICAL STRUCTURE HIGH-SPEED PERFORMANCE ADVANCED DESIGN & HIGHER
More informationElectric. Efficient. Compact & precise. ENGEL e-mac
Electric. Efficient. Compact & precise. be the first. All-electric. Best-in-class efficiency and precision to the max. All of the s movements are performed by servo-electric drives. The all-electric drive
More informationAssembly Technologies. General Industry goes. hightech
ssembly Technologies General Industry goes hightech Stanley 2009 PSI IMPOSED_Layout 1 /26/10 10:31 M Page 2 Intelligent ir Tools ngle Control M/ Pulse Tools The M/ series tools with PS (bsolute Position
More informationECSXII. Smart Electric Molding Solutions. Reach for the impossible. Achieve the incredible. Watch the ECSXII video.
TOSHIBA MACHINE ECSXII Smart Electric Molding Solutions. www.toshiba-machine.com Watch the ECSXII video. u Reach for the impossible. Achieve the incredible. U.S.A. Specifications - Catalog #ECSXII 7-17
More informationTechnical Specifications
All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure
More informationToggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving
TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB series 90-880 TH-S(D&B) series -4 TH-PET(D&B) series 3 TH-SMC series 220-4 DL-S series
More informationHelical Hydraulic Rotary Actuators. we carry the load.
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
More informationHITECH HYDRAULICS. 70 Tons Tons 60 gm gm HYBRID SERVO INJECTION MOULDING MACHINE. SERIES CNC TURNED
HITECH HYDRAULICS www.hitechimm.com www.hitechgroup.org www.hitechhydraulics.com INJECTION MOULDING MACHINES COMPLETE HYDRAULIC SOLUTIONS CNC TURNED PRECISION P A R T S ik S D KINETIC SERVO DRIVE SINGLE
More informationSERIES GRK PARALLEL GRIPPERS
GRK SERIES GRK PARALLEL GRIPPERS Ideal for Assembly and Robotics Highest Grip Force Its Class Precision Jaw Movement High Moments Highest Grip Force to Height Ratio Precision Jaw Movement Wear Compensatg
More informationECSXII. Smart All-Electric Molding Solutions. Reach for the impossible. Achieve the incredible. Watch the ECSXII video.
TOSHIBA MACHINE ECSXII Smart All-Electric Molding Solutions. www.toshiba-machine.com Watch the ECSXII video. u Reach for the impossible. Achieve the incredible. U.S.A. Specifications - Catalog #ECSXII
More informationPARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
More information30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements
440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2
More informationHelical Hydraulic Rotary Actuators
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
More information- Injection rate cm 3 /s Max. injection speed mm /s Max. injection pressure MPa Max. injection holding pressu MPa - -
1807731102 Other Screw diameter 68 75 83 83 90 100 100 110 Injection stroke 306 375 420 450 500 Theoretical injection capacity cm 3 1111 1656 2028 2272 2863 3534 3927 4752 Injection unit K600D L750D 2
More informationTM Series t. Approved precision. Technology working for you.
TM Series 180 500 t Approved precision Technology working for you. Special features and benefits of the TM Series 180 500 t The TM Series with approved precision to business success The compact power packages
More informationTechnical data TAD1641VE
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel Number of cylders 6 Displacement, total Firg order s 3 16,12 984 153624 Bore Stroke 144
More informationSE-EV Advanced All-Electric Series
SE-EV Advanced All-Electric Series SE-EV Series Advanced All-Electrics Model sizes: 56, 84, 112, 146 and 202 U.S. tons New NC-10 control with Z-molding capabilities plus improved ease-of-use, processing
More information72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply
935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More informationSE-DUZ Direct-Drive All-Electric Series
SE-DUZ Direct-Drive All-Electric Series SE-DUZ Series Direct-Drive All-Electrics Low-inertia, high-performance direct-drive motors for plasticizing, injection, clamping and ejection New PC-based control
More informationSERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D
SERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES D STANDARD BS 8110: PART 1: 1997 3.12.8.16.2, BS4482. BS4483, BS4449, ASTM A 1034: 10.5, 10.7 TEST TYPE Slip & Tensile Strength Permanent Elongation & Tensile
More informationROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES
ROMI EL 75 ROMI EL 300 PLASTIC INJECTION MOULDING MACHINES ROMI EL SERIES ROMI Industrial Complex in Santa Bárbara d Oeste - SP, Brazil INNOVATION + QUALITY Romi: Since 1930 producing high technology.
More information55, 90, 125, 140, 170, 225, 310, 400, 500 & 550 A NEW STANDARD IN TOGGLE TECHNOLOGY
55, 90, 125, 140, 170, 225, 310, 400, 500 & 550 A NEW STANDARD IN TOGGLE TECHNOLOGY Energy Efficient Rugged & Reliable recise & Consistent Versatile & User Friendly Compact Mono Toggle Design Durable Mono-Toggle
More informationElectric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply
750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More informationwww.woojinplaimm.com TN-E series TN280E IH IH Injection Unit crew & barrel type A A B C crew diameter inch 1. 1.26 1.2 1.7 1.77 1.97 Injection pressure psi 17.60 870.2 8217.8 091.16 2. 288.6 Theoretical
More informationTorque Limiter Series WT Overview. Torque Limiter Series WT
Torque Limiter Series WT Overview Torque Limiter Series WT Torque Limiter Series WT For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design
More informationServo-hydraulic Universal Testing Machine HUT Type DP
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Cyclic Tension & Compression Test Test standards AC 133: 2010: 4.1 BS 8110: PART 1:
More informationBoyles C5/C5C. Compact and powerful core drilling rig
Boyles C5/C5C Compact and powerful core drillg rig Power and flexibility a compact design The /C5C surface core exploration drillg rig is compact, yet powerful. Its compact design makes it easy to position
More informationGRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION
GRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION A Wide Range of Sizes, Jaw Styles, Jaw Travels, and Grippg Forces for Most Any Grippg Requirement INDEX: Parallel Jaw Motion Pages -1 to -19 18 Angular
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informatione-mac Electric. Efficient. Compact & precise.
e-mac Electric. Efficient. Compact & precise. All-electric. Best-in-class efficiency and precision to the max. All of the ENGEL e-mac s movements are performed by servo-electric drives. The all-electric
More informationwww.woojinplai.com pecification TN 20E IE IE Injection Unit crew & Barrel Type A A B crew Diameter 28 2 6 0 Injection Pressure kg/cm 2 626 00 2687 2172 1719 Mpa.6. 26. 21.0 168.6 Holding Pressure kg/cm
More informationU.S.A. Specifications - Catalog #ECSX 3-15
TOSHIBA MACHINE U.S.A. Specifications - Catalog #ECSX 3-15 SPECIFICATIONS This may look like one machine......but it is so versatile, with a greater range of shot sizes, you ll think it was triplets. It
More informationHILMAN ROLLERS WWW.HILMANROLLERS.COM PRODUCTS THAT MOVE THE HEAVYWEIGHTS HILMAN ROLLERS WWW.HILMANROLLERS.COM HILMAN ROLLERS Sce 19, Hilman Rollers has produced high capacity roller dollies of the highest
More informationHaitian MarsⅡSeries. Specifications / International KN. Haitian Mars. Series
Haitian MarsⅡSeries HITIN INTERNTIONL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HITIN HUYUN MCHINERY CO., LTD.
More informationElectric Servo Drive Injection Molding Machine
Electric Servo Drive Injection ing Machine Large Electric Servo Drive Injection ing Machines Promotes Faster Cycles, Energy Sa vings, and High Performance An industry pioneer, JSW has extensive experience
More informationVertical Type Injection Molding Machine. series. Insert Molding. Automation Optimization. Minimize the spaced required for installation
VH Vertical Type Injection Molding Machine series Insert Molding Automation Optimization Minimize the spaced required for installation Machine series TB series 90-880 TH-S(D&B) series 50-450 TH-PET(D&B)
More informationMID TONNAGE. Van Dorn Caliber
MID TONNAGE Van Dorn Caliber V A N D O R N C A L I B E R THE POWER OF TWO Van Dorn and Demag Ergotech As a united force, Van Dorn and Demag Ergotech offer you, the customer, a number of advantages that
More informationTechnical Data Injection Moulding Machines Series CX PET Light
130 CX PET Light Technical Data Injection Moulding Machines Series CX PET Light CX KM 130-750 CX (PET) 4-fold Injection Moulding machine metric units KM130CX Clamp unit Clamping force kn 1300 Mould opening
More informationSEEV-A HD High-Duty, Advanced All-Electric Series. 8 model sizes from 247 to 562 U.S. tons
SEEV-A HD High-Duty, Advanced All-Electric Series 8 model sizes from 247 to 562 U.S. tons SEEV-A HD Series Advanced, High-Duty All-Electrics 8 model sizes from 247 to 562 U.S. tons With the new SEEV-A
More informationIntElect highly precise. Technical description
IntElect highly precise Technical description Technical Data IntElect 0/3 Sumitomo (SHI) Demag IntElect 0/3 Model description IntElect 0/3 IntElect 0/380 00 0080 International size description Clamping
More informationAs a family-owned company with employee shareholders we are committed to supporting our customers for the long term.
NIIGON Up to 192 cavities with only 2 machine models Up to 6 stages of post-mold cooling Lowest preform drop temperature Lowest energy consumption Lowest water and air consumption half that of competing
More informationVIKING HEAVY DUTY PUMPS SERIES 4193 AND 493 STEEL EXTERNALS FEATURES
VIKING HEAVY DUTY PUMPS SERIES 49 AND 49 FEATURES Section 54 Page 54. Issue C Pressure Range 2 Temperature Range Viscosity Range 250 PSI ( BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU
More informationABB component drives ACS to 5 hp / 0.37 to 4 kw Catalog
Low voltage AC drives ABB component drives ACS150 0.5 to 5 hp / 0.37 to 4 kw Catalog Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: fo@clrwtr.com ABB component drives ABB component
More informationR - Series Tons
R VictorTaichung R - Series -1300 Tons Hybrid High-Performance Medium tonnage plastic injection molding machine to satisfy your energy saving and repeatability requirement. Victor Taichung - an established
More informationBACK TO WEBSITE. SES and SE-HY Series
BACK TO WEBSITE SES and SE-HY Series S UMITOMO Mid-Size All-Electrics and Hybrids Recognized worldwide for electric injection molding machinery technology, Sumitomo sets the standard in precision, energy-efficient,
More information6 Displacement, total Compression ratio 16,5:1 Dry weight. Engine only, excluding cooling system GenPac
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 16.12 983.7
More informationZhafir Zeres Series ,500 kn
Zhafir Zeres Series 400-6,500 kn We extend electrical options ZHAFIR ZERES SERIES Zhafir has developed a new electric injection molding machine series, the Zhafir Zeres Series, a tremendously flexible
More information50-200Tons. Second Generation All-Electric injection molding machine. Victor Taichung - an established ISO-9001 & company
50-200Tons Second Generation All-Electric injection molding machine Victor Taichung - an established ISO-9001 & 01 company 50-200Tons Second Generation All-Electric injection molding machine New Centrally
More informationVISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
SERIES 493, 493 Section 34 Page 34. TBLE OF CONTENTS Features & Benefits...2 Specifications...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Mountg Options...4 Dimensions
More informationServo-hydraulic Universal Testing Machine HUT Type D
Test type Slip & Tensile Strength Permanent Elongation & Tensile Strength Static Tension Test Static Compression Test Test standards BS 8110: PART 1: 1997 3.12.8.16.2 BS4482 BS4483 BS4449 ASTM A 1034:
More informationDEMAG HYDRAULIC IMM TRAITS
DEMAG HYDRAULIC IMM TRAITS 德马格液压机特点 Index Demag hydraulic IMM traits DFEE pump control system Developed NC5 control system High resolution ultrasonic stroke measurement system Filter and cooling concept
More informationInstallation, Operation and Maintenance Manual. for the MOGAS Pneumatic Actuator
Installation, Operation and Matenance Manual for the MOGAS Pneumatic Actuator Parts and Materials 18 21 20 22 23 24 25 19 1 2 3 4 5 6 26 27 19 7 8 9 15 16 17 22 20 21 18 14 10 25 24 11 12 13 2 Parts and
More informationVM R t CM 40 t VM t. Flexible, automated production with ultimate precision. Technology working for you.
VM R 40 270 t CM 40 t VM 60 200 t Flexible, automated production with ultimate precision Technology working for you. Special features and benefits of the VM R series 40 270 t The rotary table machine series
More informationA Series Walkie Counterbalanced Stacker. with capacities of 2,000 to 4,000lbs. The World of Hangcha
A Series Walkie Counterbalanced Stacker with capacities of 2,000 to 4,000lbs The World of Hangcha A M E R I C A Walkie Stacker Series The Walkie Reach, Straddle, or Counterbalance Stacker series can handle
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationFORK POSITIONERS. Side-Shifting Fork Positioners Heavy Duty. Premium Quality and Design T410Z T411Z T411BZ/BZI T411ZR
Side-Shiftg Fork Positioners Heavy Duty T410 T411 T411/I T411R Premium Quality and Design FORK POSITIONERS 2016 Heavy Duty Side-Shiftg Fork Positioners Fork positioners can easily handle loads with varyg
More information11050 W. Little York Bldg F / Houston, Texas Phone - +1 (713) / Fax +1 (713)
Technical Specification Sgle Head Orbital Welder Pipe Size Range : 4 (102) to fite Travel Speed Range : 0 200 (5m) / m Oscillation Speed Range : 0 138 (350 cm) / m Vertical Movement Range : 2 (51 ) motorized
More informationCorrugated paper: 4mm. Max punching speed: 7500 sheets/hour Max stripping speed: 6500 sheets/hour
Commodity name: HIGH ABILITY FULLY AUTOMATIC DIE-CUTTING MACHINE (Paper feeder, die-cutting unit, waste removal unit, delivery station, and electrical section) Model: CM-1050-SE Specifications: Max paper
More informationELEVATOR IMPACT PROTECTION
ELEVATOR IMPACT PROTECTION Oleo is a leadg expert energy absorption technology supplyg solutions to the elevator, dustrial and rail sectors. Oleo elevator buffers are designed to protect people and equipment
More informationVIKING HEAVY DUTY PUMPS
SERIES 495 STANDARD CONSTRUCTION Section 44 Page 44. Issue D FEATURES Range Temperature Range Viscosity Range 250 PSI (7 BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU ( cst to cst) 00
More informationTechnical data TAD1641GE
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 16,12 983,7
More informationTried and tested technology for perfect results: sawing and milling from FEIN.
Sawg and Cuttg Tried and tested technology for perfect results: sawg and millg from FEIN. High grade steel processg, buildg kitchens, locksmith work, metal processg and dustry FEIN jigsaws are designed
More informationTechnical data TAD1642GE
General Inle four stroke diesel enge with direct jection. Rotation direction, anticlockwise viewed towards flywheel. Turbocharged Number of cylders 6 Displacement, total Firg order litre 3 16,12 983,7
More information