Saf-T-Gard Hydraulic Actuator MH 60 Series
|
|
- Alannah Skinner
- 5 years ago
- Views:
Transcription
1 Description Saf-T-Gard Hydraulic Actuator MH 60 Series for use with ", 4, 5 and 6" nomal gate valves The The Cameron MH Hydraulic Actuator product le has been developed by usg the superior features of field proven products and then combg them with novative technology. Particular attention has been given to safety, ease of matenance and cost of manufacturg. The Cameron MH Hydraulic actuator series is designed to be used with all manufacture gate valves nomal sizes of " to 6". Its simple design and operatg prciple make this hydraulic actuator suitable for all types of applications. The Cameron Hydraulic actuators are terchangable with standard bonnet adapters. The MH60 is a dual piston which combes the greatest force value with mimal supply pressure while requirg a very small swept volume. Design Advantages Superior Piston Design Cameron hydraulic actuators utilize a special actuator head with a dual piston design. This design combes the greatest force value with mimal supply pressure while requirg very small volume of fluid. Corrosion Resistant Materials All Cameron hydraulic actuators are manufactured to NACE MR , addition all non-staless components are coated with Xylan to maximize corrosion resistance. Flexible Actuator Orientation Connectg misaligned components with rigid tubg can be time consumg and can duce high stress to the tubg connections. The MH lower rg is threaded to the bonnet, thus allowg rotation of the actuator to accommodate precise alignment. Wear Beargs Elimate Gallg Thick wear beargs are used to elimate gallg between movg metal components. Beargs are used between the packg retaer/stem terface and the actuator head/ piston terface. Simple Actuator Mountg Arrangement The actuator is mounted by merely rotatg it onto the bonnet. It is locked place with set screws. Product Data Sheet #SW pm6 Rev. 2 Page 1
2 Visiual Indicator Easily Viewed Two visual position dicator wdows located 180 apart on the housg wall allow viewg of the full gate travel without extendg the length of the actuator. The wdows are recessed so they will not terfere with normal handlg and matenance. If required, an external position dicator the form of a top shaft can be added to allow visual spection of valve position from a greater distance. The top shaft is designed to elimate the transfer of torque to the gate and bonnet stem when usg a manual hold open device. Actuator Housg Not Pressurized The actuator housg is not a pressure vessel, but is a structural coverg only. All structural components meet NACE requirements. This is a safety advantage to workers on platforms. Dra Plugs Allow Fushg of Housg Two large dra plugs are located at either end of the housg to facilitate cleang of the actuator. Large Portg Eases Matenance Pressure let and relief flow passages are 1/2" N.P.T. These larger ports are durable and help elimate debris buildup. Permanent Drift Settg Staless steel spacers are used to provide permanent drift adjustment. Removal of the actuator does not affect the adjustment. Easy Field Conversion Manual valves may be converted to actuated valves the field, usually without removg the valve from the flowle. Rapid Closure The exhaust port is designed with a standard 1/2" N.P.T. thread, which mimizes closure time and debris buildup. MH-60 Dual Piston Operation Product Data Sheet #SW pm6 Rev. 2 Page 2
3 Technical Specifications MH60 (600, 6004, 6005 & 6006) Model MH 60 M aximum Operatg Pressur e 5800 PSI (400 Bars) Series 6000 Relief Device Settg 5800 PSI ( F (54 C) Bars) at S izg For 1-1/16" 6-/8" T est Pressur e 8750 psi (60 Bars) API Classification 6A 600 = 175 lbs (78 kg) Trim for Standard Components Trim for Retaed Fluid Components A A Weight 6004 = 275 lbs (125 kg) F F 6005 = 275 lbs (125 kg) PSL* Retaed Fluid 1, 2, 6006 = 275 lbs (125 kg) PR-1 and PR-2 A ppendix F 2. 5 Operatg Temperature** (P/U) -20 F to +250 F (-29 C to +121 C) Service Class PR1, PR2 Non-Risg Stem Configuration Risg Stem Configuratio n Model Sprg Preloa d Swept Volum e Closg Time Swept Volum e Closg Time seconds 87 seconds seconds 64 seconds *API requires that only retaed fluid actuators must have a PSL ratg. ** For special temperature applications, contact engeerg. Product Data Sheet #SW pm6 Rev. 2 Page
4 Periodic Matenance Schedule The followg matenance schedule is recommended for normal operations. MAINTENANCE INTERVAL MAINTENANCE INTERVAL Replace all seals actuator assembly. At least every 12 months. Close and open SSV twice. Operation should be smooth and consistent both directions. Every month. Inspect ner and and top shaft. outer piston, actuator head, cap Inspect pressure relief device and pressure let fittgs for leaks. Clean top shaft and remove debris. When bonnet seals are replaced. Every month. Visually spect for external damage such as dents, scratches, etc. If scratched or chipped, touch up with pat to prevent rust. If dented, disassemble and spect actuator to ensure the damage does not affect the actuator s performance. Every 6 months. In order to mata the traceability requirements, all certified replacement parts must be documented and referenced writg to each dividual actuator by its serial number. Trouble Shootg Chart The followg is a table of operations and matenance problems which may be encountered with the actuator stalled. Problem Control pressure not build. actuator will Actuator will not stroke on a valve whether or not valve is pressurized. Gate valve does not stroke open when control pressure is applied. Actuator will not attach to bonnet assembly. Actuator will not stroke to full closed or Fail-Safe closed position. Actuator will not drift after assembly to bonnet/valve. Probable Cause Corrective Action D amaged control le. Inspect control le for damage and/or leakg. I nsufficient Pressure control le. Install gauge at pressure source to verify desired pressure available. F aulty pressure gauge. Verify pressure gauge is correctly calibrated. Leakg around of actuator. bolted flange and/or bottom Insufficient pressure control le. ReplaceReplace and/or spect piston seals accordance with assembly structions. If leakage persists, replace head assembly accordance with same structions. Verify pressure availability from source. Consult control pressur e formation from the formation chart per size valve application. B onnet to stem bdg. Consult appropriate matenance and operatg structions for bonnet. Valve and/or seats improperly stalled. Debris valve and actuator vents. D ebris shaft or sprg housg. Re-spect housg and sprg. Bonnet stem is not fully extended and back seated. Bad or wrong thread on bonnet stem and downstop on bonnet/sprg assembly. Gate and seats are improperly stalled causg excessive friction. Incorrect number of spacers stalled. Wrong spacer per valve size. Improper gate to stem engagement. Remove actuator. Remove bonnet per appropriate matenance and operatg manual per bonnet manufacturer. Repair and/or replace valve components accordance with valve manufacturer s structions. Remove actuator per struction manual. Remove bonnet per structions per bonnet manufacturer matenance and operatg manual. Clean debris from valve body. Grasp stem bonnet and pull to full extension, properly back-seatg stem. Check threads on bonnet stem and downstop for burrs, nicks, dgs, and debris. Check size and thread pattern for proper engagement. Remove actuator per structions manual. Manually push and/or pull bonnet stem to determe severity of bdg. If severe, clean and spect gate and seats for wear abrasion. Replace if necessary. Remove actuator per structions the manual. Check number of spacers. Repeat actuator material. removal and check for proper spacer per bill of Remove actuator per structions manual. Remove bonnet per bonne t manufacturer s structions. Check engagement per valve manufacturers structions and/or drawgs. Reassemble. Product Data Sheet #SW pm6 Rev. 2 Page 4
5 Product Data Sheet #SW pm6 Rev. 2 Page 5
Helical Hydraulic Rotary Actuators. we carry the load.
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
More informationHelical Hydraulic Rotary Actuators
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
More informationPneumatic process valve, Y-pattern with pneumatic actuator of stainless steel DN 15-50
with pneumatic actuator of staless steel Pneumatic process valve, Y-pattern with pneumatic actuator of staless steel DN 15-50 ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets Piston actuator
More informationCatalog PR-99. Tri-Clover. PR Series Positive Rotary Pump
Catalog PR-99 Tri-Clover PR Series Positive Rotary Pump PR - The Pump that was designed with the Processor md The Tri-Clover PR le was designed to overcome many of the traditionally troublesome operatg
More informationAUTOGARD 820 REMOTE RESET INSTALLATION AND MAINTENANCE
820 Remote Reset (Page 1 6) AUTOGARD 820 REMOTE RESET AND MAINTENANCE Item # Description 1 Module Reset P 2 Pressure Plate 3 Pn 4 Cylder Bearg 6 Circlip 7 S1 Hub 8 Guide Screw 9 Return Sprg 10 Guide Screw
More informationSMITH VALVE. The Solid Collection. High Pressure Integral Flanged Gate, Globe & Check Valves
SMITH VALVE The Solid Collection The Longest Lastg Le of Integrally Flanged, Round Bolted RTJ Bonnet, Full Bore, Gate, Globe & Check Valves High Pressure Integral Flanged Gate, Globe & Check Valves Flanged
More informationComplete Solutions for Engineered Valves
at.no.:egg at.no.:efv at.no.:efsv PI 6 Gate Valve omplete Solutions for Engeered Valves at.no.:epv at.no.:ev No.999 Xiangjiang Road, Suzhou New istrict,p.r. ha Post ode:215129 Tel: 8651266651365 Fax: 8651266651360
More informationPARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationVIKING HEAVY DUTY PUMPS
SERIES 495 STANDARD CONSTRUCTION Section 44 Page 44. Issue D FEATURES Range Temperature Range Viscosity Range 250 PSI (7 BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU ( cst to cst) 00
More informationVIKING HEAVY DUTY PUMPS SERIES 4193 AND 493 STEEL EXTERNALS FEATURES
VIKING HEAVY DUTY PUMPS SERIES 49 AND 49 FEATURES Section 54 Page 54. Issue C Pressure Range 2 Temperature Range Viscosity Range 250 PSI ( BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU
More informationVISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
SERIES 493, 493 Section 34 Page 34. TBLE OF CONTENTS Features & Benefits...2 Specifications...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Mountg Options...4 Dimensions
More informationT 8075 EN Type 3591 Globe Valve ANSI version
T 8075 EN Type 3591 Globe Valve ANSI version Application Matenance-friendly cage valve for process engeerg applications with high dustrial requirements Valve size NPS 10 to 32 Pressure ratg to 900 Temperatures
More informationSMITH VALVE. The Solid Collection. High Pressure Integral Flanged Gate, Globe & Check Valves
SMITH VALVE The Solid Collection The Longest Lastg Le of Integrally Flanged, Round Bolted RTJ Bonnet, Full Bore, Gate, Globe & Check Valves High Pressure Integral Flanged Gate, Globe & Check Valves Flanged
More informationTel. rigsolution.com API spec 6A
Tel rigsolution.com Http://www.rigsolution.com WELL HEAD EQUIPMENTS XMAS TREE API spec A OILMAN RIG CO.,LTD OILMAN All WELL HEAD EQUIPMENTS & XMAS TREES products are supplied by Oilman and manufactured
More informationGENERAL PUMPS FIRE PUMPS ESPAÑA APPROVED EX
FIRE PUMPS FM EX2 APPROVED www.pumpsgp.com General Pumps SL., was established more than 2 years ago Valencia, Spa. We are a major manufacturer Spa of a wide variety of water pumps for various applications.
More informationStafford, Texas USA. 55,000 square feet ISO 9001:2008 API 6D CE/PED ISO/TS API Q1
F L O A T I N G B A L L V A L V E S JAG flocomponents USA, Inc Stafford, Texas USA 55,000 square feet ISO 9001:008 API 6D CE/PED ISO/TS 9001 API Q1 JAGf lo s wholly owned Dalian, Cha facility uses state
More informationVIKING HEAVY DUTY PUMPS SERIES 4197 STAINLESS STEEL FEATURES
VIKING HEAVY DUTY PUMPS FEATURES Section 64 Page 64. s Cutaway View 0--0 GPM Sizes (2-4.5-7 m³/hr) s Cutaway View 5-50-75 GPM Sizes (8--7 m³/hr) Pressure Range Temperature Range Viscosity Range 0 PSI (4
More informationTorque Limiter Series WT Overview. Torque Limiter Series WT
Torque Limiter Series WT Overview Torque Limiter Series WT Torque Limiter Series WT For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design
More informationInstallation, Operation and Maintenance Manual. for the MOGAS Pneumatic Actuator
Installation, Operation and Matenance Manual for the MOGAS Pneumatic Actuator Parts and Materials 18 21 20 22 23 24 25 19 1 2 3 4 5 6 26 27 19 7 8 9 15 16 17 22 20 21 18 14 10 25 24 11 12 13 2 Parts and
More informationSERIES GRK PARALLEL GRIPPERS
GRK SERIES GRK PARALLEL GRIPPERS Ideal for Assembly and Robotics Highest Grip Force Its Class Precision Jaw Movement High Moments Highest Grip Force to Height Ratio Precision Jaw Movement Wear Compensatg
More informationBray/ VAAS Slurry Series Knife Gate Valve 760/762/765/766/767/768 Series Operation and Maintenance Manual
Bray/ VAAS Knife Gate Valve 760/762/765/766/767/768 Series Table of Contents Definition of Terms 1 Safety Instructions 1 Introduction 2 Unpacking 2 Storage 2 Installation 3 Commissioning 3 Cylinder-Operated
More informationPGDX Rectangular duct coolers with DX coil
Rectangular duct coolers with DX coil 10,0 Rectangular duct coolers with DX COIL Rectangular duct coolers with DX coil are used for central coolg of the ventilation air ventilation systems. The is also
More informationTorque Limiter T-Series Overview. Autogard Torque Limiter T-Series
Torque imiter T-Series Overview Autogard Torque imiter T-Series Torque imiter T-Series For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design
More informationCleanfit P CPA474. Technical Information. Retractable plastic process assembly with ball valve for ph and ORP electrodes
Technical Information Retractable plastic process assembly with ball valve for ph and ORP electrodes pplication hemical dustry Wastewater / dustrial water Power plants Refuse cerators The P 474 holder
More informationActuators & Surface Safety Valves
Global Energy Market Solutions HYDRAULIC / PNEUMATIC Actuators & Surface Safety Valves Including: Accessories & Alternative Configurations 2017 Omni Valve Company, LLC, BRO-ACT Rev: 1.2 ENGINEERED FOR
More informationMODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
More informationHEAVY LIFTERS FOR MATERIAL HANDLING
HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars
More informationVIKING MOTOR SPEED INTERNAL GEAR PUMPS
VIKING MOTOR SPEED Series Description Vikg s Motor Speed series ternal gear pumps represent a technological advance the science of flow. Through new techniques of feedg the rotor and idler, Vikg has achieved
More informationDouble-Row Ball Bearings, 5000 Series
Double-Row Ball Beargs, 5000 Series C M MRC double-row ball beargs are manufactured two ma types: C-type conrad construction and M-type maximum capacity with fillg notches. Each row has a 0 contact angle.
More informationSection 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informationGATE VALVES BOLTED BONNET
삼우 카다록 (P) 9..9 11:0 PM 페이지 1 삼우 카다록 (P) 9..9 11:0 PM 페이지 15 CAST STEE YOKE SEEVE The upper portion of the Yoke Sleeve is hexagonally tapered to fix the handwheel. The standard material of the Yoke Sleeve
More informationWafer check valve AxiaI flow check valve
Your Professional Valve Solution Wafer check valve AxiaI flow check valve Tipvalve is specialized dustrial valves production, research and development, sales and service. Offer the valve solution rigorous
More informationAS-1 Retrievable Packer
AS-1 Retrievable Packer Retrievable Packers & Accessories The AS-1 Retrievable Packer is one of the most reliable and versatile mechanically set packer. It may be used any production application and is
More informationLOAD CHARTS NBT45 85% STABILITY ON OUTRIGGERS
LOAD CHARTS NBT45 85% STABILITY ON OUTRIGGERS 295995 SERIAL NUMBER 1 2 TABLE OF CONTENTS GENERAL NOTES...4-5 LIFTING AREA DIAGRAM / LINE PULLS & REEVING INFO / HOIST PERFORMANCE... 6 RANGE DIAGRAM w/ EXTENSION...7
More informationLOAD CHARTS NTC55 85% STABILITY ON OUTRIGGERS
LOAD CHARTS NTC 5% STABILITY ON OUTRIGGERS 0443 SERIAL NUMBER GA24146 1 TABLE OF CONTENTS GENERAL NOTES... 6-7 WT. REDUCTIONS / LINE PULLS & REEVING INFO / HOIST PERFORMANCE... LIFTING AREA DIAGRAM / BASKET
More informationValveworks USA Operation and Maintenance Booklet Model FC
Operation and Maintenance Booklet Model FC MODEL FC 3000, 5000, 10000, & 15000 W.P. FLOATING SLAB GATE VALVES 1 13/16-2 1/16-2 9/16-3 1/16-4 1/16 BOOKLET APPROVED BY: INTRODUCTION In appreciation to you
More informationLOW PRESSURE BALANCED VALVE DIAPHRAGM BALANCED
DIAPHRAGM BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to
More informationHYDRAULIC PUMP. INSTALLATION, OPERATION, & MAINTENANCE MANUAL MAINTENANCE MANUAL #: MM-HP Rev. A Page 1 of 12
INSTALLATION, OPERATION, & #: MM-HP001 4-20-09 Rev. A Page 1 of 12 HYDRAULIC PUMP PART NUMBER HP46982ALSL & HP46982SL HYDRAULIC PUMP MM-HP001 Rev. A Page 2 of 12 Table of Contents 1.0 General Page 3 2.0
More informationTri-Clover Manual and Air Actuated Fractional Valves
FVSM-99 Tri-Clover Manual and Air Actuated Fractional Valves Series 650 655 660 CONTENTS Thank you for purchasing a Tri-Clover Product! This manual contains disassembly and assembly instructions, maintenance
More informationAPI 6D. Complete Solutions for Engineered Valves
API D Pipele Valves Complete Solutions for Engeered Valves Cat.no.:E-PV-007 Table of Contents Introduction 1 Quality Coitment ~5 ~7 ~11 1~15 1~17 0~1 ~5 ~1 ~ 7 ~9 Products Views How to Order Design Feature
More informationWellGuard TM HWG-HL Piston Hydraulic Actuator
WellGuard TM HWG-HL Piston Hydraulic Actuator Actuation for API 6A and 6D through conduit gate valves. For shut down (reverse acting) or blow down (direct acting) applications. Oil treating and de-salting
More informationPILOT OPERATED SEQUENCE VALVE - Series VR4S
PILOT OPERTED SEQUENCE VLVE - Series VRS Veljan Sequence Valve Series VRS are pilot operated controls and enable a hydraulic system to operate a sequence. Fluid is allowed to pass to a secondary system
More informationMODEL DX Pneumatic Diaphragm Actuator
MODEL DX Pneumatic Diaphragm Actuator FEATURES Flexibility Model DX actuators can be adapted to operate valves from any manufacturer (interface information is required) and can be assembled in single or
More informationMODEL APH HYDRAULIC ACTUATOR
OPERATION & MAINTENANCE MANUAL MODEL APH HYDRAULIC ACTUATOR TABLE OF CONTENTS I. Introduction............................................. 3 II. Actuator Operation.........................................
More informationMedia Number -SENR Publication Date -01/10/1977 Date Updated -12/10/2001
- - 55, 56, 57, 58 & 59 TOWING WINCHES Page 1 of 21 Testing and Adjusting 55, 56, 57, 58 & 59 TOWING WINCHES Media Number -SENR7217-01 Publication Date -01/10/1977 Date Updated -12/10/2001 Testing And
More informationMODEL HX. Fail Safe Hydraulic Actuator FEATURES INTRO AVAILABLE SIZES. Hydraulic Actuation
MODEL HX Fail Safe Hydraulic Actuator FEATURES Flexibility Model HX actuators can be adapted to operate valves from any manufacturer (interface information is required) and can be delivered with alternate
More informationInstallation, Operation and Maintenance Instructions
Installation, Operation and Maintenance Instructions MODEL 5520 June 2002 1.0 GENERAL... 2 Model Number Information... 2 Features... 3 Specifications... 4 Table 1A. Flow Coefficients (C V ), Modified Percent
More informationPiston Accumulators. Threaded Piston Accumulators ACP Crimped Piston Gas Bottles Metric Accumulators & Bottles. Piston Accumulators.
Overview Introduction Threaded ACP Crimped Piston Gas ottles Metric Accumulators & ottles Piston 5000 4000 3000 3000 2000 IN THIS SECTION Series 2000 & 3000 29 ACP 37 Series 4000 & 5000 43 Features: Heavy
More informationDEMCO Model DM Gate Valves
Page of 24 Installation, Operation, Maintenance and Repair Manual DEMCO Model DM Gate Valves Classes : 400 000 600 2000 900 3000 500 5000 Page 2 of 24 Published May 2002 Cooper Cameron Corporation, Cooper
More informationCONSTANT EFFORT SUPPORTS
CONSTANT EFFORT SUPPORTS Our current range of Constant Effort Supports is the latest step a contuous development programme which began 1950 with the Con-Ten support. The range has been designed takg to
More informationGRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION
GRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION A Wide Range of Sizes, Jaw Styles, Jaw Travels, and Grippg Forces for Most Any Grippg Requirement INDEX: Parallel Jaw Motion Pages -1 to -19 18 Angular
More informationFRAC STACKS stingercanada.com
FRAC STACKS stingercanada.com Grande Prairie 11303 96 Avenue Grande Prairie, AB T8V 5M3 780-513-3696 Calgary 420-510 5th Street SW Calgary, AB T2P 3S2 403-340-0716 Red Deer 334-28042 Hwy 11 Red Deer County,
More informationHPS Two-Stage Vacuum Valve Instruction Manual Addendum - Bypass Valve Service
HPS Two-Stage Vacuum Valve Instruction Manual Addendum - Bypass Valve Service 651 Lowell Street Methuen, MA 01844 Main Telephone: (800) 227-8766 p/n 1061038 www.mksinst.com Rev. 001 Copyright 2105 by MKS
More informationELEVATOR IMPACT PROTECTION
ELEVATOR IMPACT PROTECTION Oleo is a leadg expert energy absorption technology supplyg solutions to the elevator, dustrial and rail sectors. Oleo elevator buffers are designed to protect people and equipment
More informationONYX VALVE CO MODEL DAC-PFO Installation & Maintenance
ONYX VALVE CO MODEL DAC-PFO Installation & Maintenance OPERATION: (01-10) The Onyx series DAC-PFO pinch valve fails open on loss of air. This simple spring and air bag arrangement that drives a pair of
More information1451 Control Valve. General Instructions. Table of Contents
1451 Control Valve General Instructions The SOR 1451 Freezeless control valve is a high-pressure, reverse-seating liquid control valve typically used in separators and other process vessels. The body screws
More informationFuel Gas/ Starting Air Valve Series
Sales Manual Section 364 PRODUCT SPECIFICATION 85380-SERIES Fuel Gas/ Starting Air Valve 85380 - Series GENERAL DESCRIPTION The 85380-Series valve is designed for use either as a fuel gas valve or a starting
More information40,000 PSI EXIT CONTENTS NEXT
PSI "Your Waterblast Solutions Provider" Call us today or visit our website at wwwwaterblastcom Over the last several decades, Jetstream of Houston, LLP, a division of Federal Signal, has provided dustrial
More informationModel Ton Hand Carry Axle Jack P/N: CJ67D0250-1
Model 1504-50 15 Ton Hand Carry Axle Jack P/N: CJ67D0250-1 Operation and Maintenance Manual with Illustrated Parts List 2222 South Third Street Columbus, Ohio 43207-2402 Phone (614) 443-7492 FAX (614)
More informationCast Carbon and Low Alloy Steel Valves ASME Class 150 / 300 / 600 / 900 / 1500 / 2500 Gate, Globe and Check Valves, Bolted Bonnet Design
K-170=06 Cast Carbon and Low Alloy Steel Valves ASME Class 150 / 300 / 600 / 900 / 1500 / 2500 Gate, Globe and Check Valves, Bolted Bonnet esign ultimate performance and efficiency. Its ma feature is a
More informationSeries 8000 Air Actuated Valves
Series 8000 Air Actuated Valves 10-30.3-1 Pneumatically actuated valves with powerful closing spring for reliable operation Compact design with integral solenoid, quick exhaust and position switches that
More informationSpring Return and Double Acting Pneumatic Quarter-turn Actuators Operations Manual
Spring Return and Double Acting Pneumatic Quarter-turn Actuators Operations Manual Table of Contents General..................... 1 Pneumatic Recommendations... 1 Construction................. 2 Disassembly
More informationCAUTION: The possible problems and causes are listed in order of likelihood and ease of checking.
The information contained herein is for use by skilled hydraulic elevator professionals. Before disassembly of the valve, make sure the power is off by turning the main disconnect switch The possible problems
More informationNTC55 Product Guide. Features. ASME B30.5 Imperial 85% 49,9 t (55 USt) capacity at 2,44 m (8 ft)
NTC Product Guide ASME B30.5 Imperial % Features 49,9 t ( USt) capacity at 2,44 m (8 ft) 39,01 m (128 ft) five-section, full-power boom Hydraulically removable counterweight system with multiple configurations
More informationAccessory Drive
1 of 13 8/25/2010 1:01 PM 009-001 Accessory Drive Preparatory Steps The air compressor and the fuel pump can be removed as an assembly. Remove the fuel pump. Refer to Procedure 005-016. Remove the air
More informationENGINEERING MANUAL THERMODRIVE TECHNOLOGY
ENGINEERING MANUAL THERMODRIVE TECHNOLOGY 2017 TABLE OF CONTENTS INTRODUCTION... 5 About Intralox... 5 Intralox Hygienic System... 5 Customer Resources... 6 ThermoDrive Tensionless Belt System... 7 DESIGN
More informationYARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
More informationCast Carbon and Low Alloy Steel Valves
Cast Carbon and Low Alloy Steel Valves ASME Class 1///900/1/0 Gate, Globe and Check Valves, Bolted Bonnet esign PROVIE BY: PT. SINAR MAS SAKTI TEL: (62 21) 88 FAX: (62 21) 62910 EMAIL: sales@smsakti.com
More informationQuick-Fit Ducting Catalog
QF Quick-Fit Ductg Catalog Made the USA -53- 800-255-6213 QF Pipe Adjustable Nipple O-Rg Clamps Flanged Pipe 16ga & 18ga Pipe 16ga Nipple Assembly &18ga Nipple PART: 3200 Page 56 Angle Flange Adapter PART:
More informationONYX VALVE CO MODEL CAR, CAP-PFO Installation & Maintenance
ONYX VALVE CO MODEL CAR, CAP-PFO Installation & Maintenance OPERATION: (4-2010) The Onyx series CAR-PFO and CAP-PFO pinch valves fail open on loss of air. The simple spring and air bag arrangement drives
More informationTroubleshooting The Transmission Hydraulic System
416B, 426B, 428B, 436B, & 438B BACKHOE LOADERS TRANSMISSION Testing And Adjusting Troubleshooting The Transmission Hydraulic System Make reference to the following warning and pressure tap locations for
More informationTemperature regulating valve Type ORV
Data sheet Temperature regulatg valve Type ORV ORV are 3-way dustrial valves for matag a constant oil temperature gas compressor systems, by mixg hot and cold oil the lubricatg system of e.g. screw or
More informationHANCOCK 600 GATE, GLOBE AND CHECK VALVES FORGED STEEL
HANCOCK 600 GATE, GLOBE AND CHECK VALVES A range of ASME class 800 and 1500 reduced bore forged steel valves with screwed, socket weld, butt weld or flanged ends GATE VALVES A compact but extremely sturdy
More informationModel SCV (Angle Body)
Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and
More informationBETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY FOR CB-SR-S SEISMIC SPRING RETURN SERIES PNEUMATIC ACTUATORS
BETTIS SERVICE INSTRUCTIONS DISASSEMBLY AND REASSEMBLY FOR CB-SR-S SEISMIC SPRING RETURN SERIES PNEUMATIC ACTUATORS PART NUMBER: 102264 REVISION: "C" DATE: November 2000 Page 1 of 11 1.0 INTRODUCTION 1.1
More informationExpanding & Slab Gate Valves
Global Energy Market Solutions CAST / FORGED BODY Expanding & Slab Gate Valves For oil and natural gas wellhead, flowline, manifold, fracture or other critical service applications requiring operating
More informationDisplacement 5.3L 325 CID. Stroke 92.0 mm in. Firing Order Spark Plug Gap 1.02 mm 0.04 in
Enge Mechanical Specifications (RPO LMG VIN 0) Specification Application Metric English General Enge Type V8 Displacement 5.3L 325 CID RPO LMG VIN 0 Bore 96.0-96.018 3.779-3.78 Stroke 92.0 3.622 Compression
More informationOperating & Maintenance Manual For Steam Conditioning Valve
For Steam Conditioning Valve 1 Table of Contents 1.0 Introduction 3 2.0 Product description 3 3.0 Safety Instruction 4 4.0 Installation and Commissioning 5 5.0 Valve Disassembly 6 6.0 Maintenance 6 7.0
More informationHIGH PRESSURE CONTROL VALVE PISTON BALANCED
PISTON BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be
More informationENGINEERING DATA ENGINEERING DATA
ENGINEERING DATA 173 Average Depth 3.5 ft. 24 ft. Dia. ESTIMATING TOTAL GALLONS IN A POOL OR SPA Width Length Depth (deep) Depth (shallow) Radius 2 x 3.14 x A.D. x 7.5 = Gallons 12 x 12 x 3.14 x 3.5 x
More informationOPERATION AND MAINTENANCE MANUAL
WREN IBT SERIES HYDRAULIC TORQUE WRENCHES IBT SQUARE DRIVE SERIES OPERATION AND MAINTENANCE MANUAL FOR WREN Products: POINT 75, 1IBT, 3IBT, 5IBT, 8IBT, 10IBT, 20IBT, 25IBT, 35IBT, 50IBT SQUARE DRIVE HYDRAULIC
More informationBenefits and Selection Table
105 Benefits and Selection Table D-M-E s Internal Latch Lock Allows Precision Control of Mold Plate Latchg Operation D-M-E s unique ternally-mounted latch lock mechanism adapts a number of mold base sizes
More information2001 SERIES CRYOGENIC BAR STOCK BODY VALVES
12501 Telecom Drive, Tampa, FL 33637 Ph: (813) 978-1000 Fax: (813) 977-3329 www.cpc-cryolab.com INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS 17/4.5.2 Rev. 0 2001 SERIES CRYOGENIC BAR STOCK BODY
More informationSeries Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications.
7 YARWAY Hancock T-Pattern Globe valves Direct contact and metal-to-metal seating makes the T-pattern globe stop valve ideal for most shut-off applications Features Heavy integral stellite hardfacing on
More informationCast Carbon and Low Alloy Steel Valves. ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet Design
Cast Carbon and Low Alloy Steel Valves ASME Class ///900/1/0 Gate, Globe and Check Valves, Bolted Bonnet esign I N E X Profile of KITZ Cast Steel Valves...1 Standard Product Range...2 Standard Seat Material
More informationHexPro Series Low Profile Wrenches
HexPro Series Low Profile Wrenches Operation and Maintenance Manual Model 2HP 4HP 8HP 14HP 30HP www.torquetoolsinc.com Use the HEXPRO Series Low Profile Wrenches Model 2HP 4HP 8HP 14HP 30HP to install
More informationInstallation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual API 6D Piston Check Valve - IOM: Installation, Operation and Maintenance Manual 1/16 Table of Contents 1 INTRODUCTION... 3 1.1 SCOPE... 3 1.2 DISCLAIMER...
More informationOperation and Maintenance Instructions for Bettis GVO-C Series GVO-CLP-SR Pneumatic Actuators
Part Number: GVO-CLP-SR.IOM.1003, Rev. 0 Release: March 2016 Operation and Maintenance Instructions for Bettis GVO-C Series GVO-CLP-SR Pneumatic Actuators Part Number: GVO-CLP-SR.IOM.1003, Rev. 0 Table
More informationDO NOT INSTALL, OPERATE, OR MAINTAIN AN ATI PRODUCT UNLESS TRAINED AND QUALIFIED IN PRODUCT AND ACCESSORY INSTALLATION, OPERATION AND MAINTENANCE.
IOM Supplement IOMS003 ATI HO1/HO2 HYDRAULIC OVERRIDE Scope of Supplement This supplement is intended to assist those who are involved with the installation, operation and maintenance of ATI Linear Actuators
More informationDURCO BTV-2000 Valve. Lined Chemical Service Butterfly Valves
DURCO BTV-000 Valve Led Chemical Service Butterfly Valves Durco BTV-000 Features Cost Effective Super Safe Performance A n important product from Flowserve the Company that troduced the CPI s first fluoropolymer
More informationRugby Manufacturing Hoist Cylinder Bulletin. Preface Technical Service Bulletin
Preface Technical Service Bulletin This bulletin applies to the following hoist models: LR-310 LR-3510 LR-3510A LR-416 LR-416B LR-165 LR-165A LR-25 LR-25A LR-525 LR-26B LR-26C LR-27B LR-623 LR-28A LR-2066
More information30' BOOM 13' 8" (4166) 24' BOOM 11' 8" (3556) 1' 8-1/2" (521) 3' 8-1/2" (1129) 15' 9-1/2" (4813) 17' 9-1/2" (5421)
INDUSTRIAL CRANE Dimensions 10' 10" (3302) 9' 4" (2845) 6' (1829) TRACK 7' (2134) A B 24' BOOM 11' 8" (3556) 1' 8-1/2" (521) 30' BOOM 13' 8" (4166) 3' 8-1/2" (1129) C 15' 9-1/2" (4813) 17' 9-1/2" (5421)
More informationPRESSURE REGULATOR BACK PRESSURE TO ATMOSPHERE WITH OUTSIDE SUPPLY
PRESSURE REGULATOR BACK PRESSURE TO ATMOSPHERE WITH OUTSIDE SUPPLY All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been
More informationFisher 657 Diaphragm Actuator Sizes and 87
Instruction Manual 657 Actuator (30-70 and 87) Fisher 657 Diaphragm Actuator Sizes 30 70 and 87 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Installation... 3 Mounting
More information14 and 12 Gauge Ducting 2017 Price Catalog
XD 14 and 12 Gauge Ductg 2017 Price Catalog www.nordfab-us.com 800-532-0830 Nordfab Ductg Heavier Gauge Ductg In late 2015, Nordfab troduced XD Ductg, our le of ductg constructed from galvanized steel
More informationVALVEWORKS USA OPERATION AND SERVICE MANUAL FOR MODEL FC GATE VALVES MODEL FC PSI W.P FLOATING SLAB GATE VALVES
OPERATION AND SERVICE MANUAL FOR MODEL FC GATE VALVES MODEL FC 3000-15000 PSI W.P FLOATING SLAB GATE VALVES INTRODUCTION In appreciation to our customer for purchasing our product, we have prepared this
More informationOperation and Maintenance Manual http://www.torsionx.eu Use the MaxDrv Series Square Drive Torque Wrench Model.75, 1, 3, 5, 8, 10, 20, 25, 35, 50 to install and remove threaded fasteners requiring precise
More informationTECHNICAL DATA 1-1/2 (dn40)
July 1, 2011 Deluge Valves 209a DESCRIPTION The Viking Model E-3 1-1/2 Deluge Valve is a quick-opening, differential type flood valve with a rolling diaphragm clapper. The deluge valve is used to control
More informationONYX VALVE CO MODEL DAC-ADA Installation & Maintenance
ONYX VALVE CO MODEL DAC-ADA Installation & Maintenance OPERATION: (4-2010) The Onyx series DAC-ADA pinch valve fails in last position on loss of air. This actuator is a double acting cylinder arrangement
More information