Helical Hydraulic Rotary Actuators. we carry the load.
|
|
- Frederica Parks
- 6 years ago
- Views:
Transcription
1 Helical Hydraulic Rotary Actuators we carry the load.
2 POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic Rotary Actuators COMPACT High power density Fits tight spaces HOLDS POSITION Zero ternal leakage Smooth operation No external brake required SIMPLIFIES Elimates beargs, lkages & brackets Reduces bill of materials Simplifies supply cha, assembly and matenance BACKDRIVES IN OVERLOAD CONDITIONS Hydraulic fuse Prevents mechanical damage For over 45 years, Helac has lead the way actuator technology and novation. Our extensive le of compact and powerful rotary actuators offer simple and cost-effective solutions to move, support and position rotatg loads countless applications. Helac actuators are designed to replace multiple components and function as a rotatg device, mountg bracket and bearg, all--one. They feature tremendous torque output and exceptional load bearg capability compact dimensions. we carry the load. 2
3 we carry the load. L10 SERIES Rotation: 180 and 360 Maximum Drive Torque: 1,700 to 25,000 - Maximum Holdg Torque: 5,600 to 83,000 - Maximum Straddle Moment: 5,000 to 100,000 - Maximum Cantilever Moment: 5,000 to 100,000 - Mountg: Flange L20 SERIES Rotation: 180 Maximum Drive Torque: 4,500 to 39,000 - Maximum Holdg Torque: 11,800 to 93,200 - Maximum Straddle Moment: 22,500 to 280,000 - Maximum Cantilever Moment: 12,000 to,000 - Mountg: Foot L30 SERIES Rotation: 180 and 360 Maximum Drive Torque: 17,000 to 380,000 - Maximum Holdg Torque: 43,600 to 936,000 - Maximum Straddle Moment: 119,000 to 1,505,000 - Maximum Cantilever Moment: 45,900 to 570,000 - Mountg: Flange or Foot T20 SERIES Rotation: 200 and 220 Maximum Drive Torque: 25,000 to 60,000 - Maximum Holdg Torque: 54,200 to 127,000 - Maximum Straddle Moment: 37,500 to 90,000 - Mountg: Foot 3
4 Helac actuators move, support and position all around the world 4
5 we carry the load. Operatg Technology Helac s novative, slidg-sple operation technology converts lear piston motion to powerful shaft rotation. Each actuator is comprised of a housg and two movg parts the central shaft and piston. Helical sple teeth on the shaft engage matchg teeth on the piston s side diameter. A second set of helical sples on the piston s outside diameter mesh with the gear the housg. STARTING POSITION The piston is completely bottomed out. Bars dicate startg positions of piston and shaft. The housg with tegral gear remas stationary. ENDING POSITION When hydraulic pressure is applied to the piston, it moves axially; while the helical gearg causes the piston and shaft to rotate simultaneously. Applyg pressure to the opposite port will return the piston and shaft to their origal startg positions. Industries Served Agriculture Construction Energy Mare Material Handlg Military Mg Truck/Trailer and many others... 5
6 Customized Products Helac Corporation can customize our rotary actuators to meet unique application requirements. Custom engeerg can range from slight to complete, and is offered to those customers whose actuator needs match our program requirements. Mountg Options Cantilever Mount The load is mounted to the shaft flange and is supported at only one end of the shaft. Cantilever mountg is not recoended for aerial work platforms or other critical and safety-related applications. Straddle Mount The load is supported at both ends of the shaft. L10 SERIES Cantilever Mount L20 SERIES Rail Mount Cantilever Mount Straddle Mount The upper portion of the bracket is bolted to the shaft flange. The lower portion is secured by a tie rod passed through the shaft bore. L30 SERIES Clevis Mount The upper portion of the bracket is bolted to the shaft flange, the lower portion is bolted to the endcap flange. Cantilever Mount Straddle Mount IMPROPER SELECTION, INSTALLATION, OR USE OF HELAC PRODUCTS OR SYSTEMS MAY RESULT IN FAILURE AND CAUSE DEATH, PERSONAL INJURY OR PROPERTY DAMAGE. 6
7 we carry the load. Valve Configurations Optional factory mounted counterbalance valves prevent rotation the event of a hydraulic le failure, control rotation when loads go over center, and protect the actuator agast excessive torque loads. L10 with counterbalance valve Hydraulic Schematic of Optional Counterbalance Valve L10, L20 and T20 Series Manufactured from alumum, the valve blocks are bolted to a flat mountg pad on the actuator housg. Three bolts secure the valve block to the actuator. See specification pages for valve location. The pilot ratio is 3:1. The valves are set to relieve at 3300 psi ±300 psi (228 bar ±21 bar). L20 with counterbalance valve L30 Series Standard Valve for L30-17 and L Degree Models Manufactured from alumum, the valve blocks are bolted to a flat mountg pad on the actuator housg. Three bolts secure the valve block to the actuator. See specification pages for valve location. The pilot ratio is 3:1. The valves are set to relieve at 3300 psi ±300 psi (228 bar ±21 bar). T20 with counterbalance valve Standard Valve for all other L30 Series Actuators Manufactured from ductile iron, the valve blocks are bolted to a flat mountg pad on the actuator housg, usually over port P1. Factory stalled steel tubg connects the valve to port P2. Valve locations and plumbg routg differ among sizes. See specification pages for details. L30 with counterbalance valve, no tube (select models only) The pilot ratio is 2.5:1. The valves are set to relieve at 3,625 psi +/- 360 psi (250 bar +/- 25 bar). Valve Ready Option Available on select models only, the actuator has a flat mountg pad mached on the housg with threaded holes to accept the valve mountg bolts. The actuator-to-valve ports have threaded plugs which allow the actuator to be used with or without a valve. L30 with counterbalance valve, with tube (select models only) 7
8 Model Code Reference Guide L E - RF - 180/90 - S1 - O - H Model Code Description L10 Series L20 Series L30 Series T20 Series 1 Actuator Series L10 L20 L30 T20 2 Model Measurement System E English System M Metric System ES/MS Custom Design 4 Housg Configuration RF Rear Flange FT Foot Mount FT Foot Mount FF Front Flange FT Foot Mount 5 6 Standard Rotation Special Rotation Degrees Degrees L only L or 360 only Degrees Degrees Degrees L only Standard design with ternal stop tube to limit rotation - dicates fal rotation Degrees T only 7 Shaft/End cap Configuration S1 Mountg holes shaft flange only. S1 S2 Mountg holes shaft flange with through-hole for tie rod (4.5, 8.2, and 15k models) Mountg holes shaft and end cap flanges (25 and 39k models) S1 S2 Mountg holes shaft flange only Mountg holes shaft and end cap flanges DS DA Dual Sple Dual Adapter 8 9 Valve Options C Counterbalance Valve O No Valve V Valve Ready Seals H Standard Seals and Beargs S Special Seals and Beargs The Model Code defes standard configurations of our actuators. Please contact Helac Corporation for special requirements. 8
9 we carry the load. Actuator Performance Torque Versus Hydraulic Pressure and Loads The drivg torque and holdg torque are approximately lear with hydraulic pressure. As moment loads crease, drive torque may be reduced by up to 15%. TORQUE VS. PRESSURE TORQUE VS. MOMENT 300% 120% 250% 100% TORQUE, % RATED 200% 150% 100% TORQUE, % RATED 80% 60% 40% 50% 20% 0% 0 25% 50% 75% 100% PRESSURE - % RATED 0% 0 25% 50% 75% 100% MOMENT - % RATED Drive Holdg Drive Holdg SPECIFICATIONS REFERENCE GUIDE CANTILEVER MOUNT STRADDLE MOUNT C Radial Load B Cantilever Moment C Radial Load B Straddle Moment A Torque A Torque D Thrust Load D Thrust Load Digital Drawgs can be provided the followg formats:.pdf,.stp,.dwg and.dxf. request to actuators@helac.com, or call (US and Canada), or (Worldwide). 9
10 SHAFT FLANGE HOUSING FLANGE L10 Specifications * Torque (A) Drive Torque 3,000 psi 210 bar 1, , , , , , Holdg Torque 3,000 psi 210 bar 5, , , , , , Moment Capacity (B), Cantilever Mount Capacity - Nm 5, , , , , , Radial Capacity (C) Radial 2, , , , , , Axial Capacity (D) Axial 2, , , , , , Displacement cc cc Approximate Weight
11 L10 Series L10 Models * D1 Shaft mountg surface diameter D2 Housg diameter D3 Mountg flange side diameter F1 Mountg holes, shaft flange ch 5/ M8 x / M8 x / M10 x / M16 x F2 Number of mountg holes, shaft flange F3 Bolt circle diameter, shaft flange F4 Mountg holes, housg flange ch 5/ M8 x / M8 x / M10 x F5 Number of mountg holes, housg flange F6 Bolt circle diameter, housg flange F7 Shaft through-hole diameter H1 Centerle to valve top L1 Overall Length L2 Overall Length, non-rotatg L3 Shaft flange to counterbalance valve P1, P2 Ports, housg V1, V2 Ports, valve ch ISO-11926/SAE Series of ports. Sizes are 7/16. See drawgs for details. ISO /BSPP G Series of ports. Sizes are 1/8. See drawgs for details. * L Specification charts are for general reference only. Consult drawg for actual values and tolerances. 11
12 L20-25, 39 SHAFT FLANGE L20-25, 39 ENDCAP L20-4.5, 8.2, 15 SHAFT FLANGE L20-4.5, 8.2, 15 ENDCAP L20 Specifications Torque (A) Drive Torque Holdg Torque Moment Capacity (B) Straddle Moment Cantilever Moment Radial Capacity (C) Axial Capacity (D) Displacement 3,000 psi 210 bar 3,000 psi 210 bar - Nm - Nm cc Approximate Weight 4, , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
13 L20 Models D1 Shaft and endcap flange diameter D2 Housg diameter F1 Mountg holes, shaft flange ch / M10 x / M10 x / M20 x F2 Number of mountg holes, shaft flange F3 Bolt circle diameter, shaft flange F4 Through-hole diameter (S1) ch F5 Foot hole diameter F6 Shaft center hole size ch F7 Mountg holes, endcap flange (S2) ch /4 through M20 through 5/8 M through M24 through 3/4 M through M24 through 1 M M M24 x F8 Number of mountg holes, endcap flange (S2) 8 10 L20 Series / M20 x /4 M30 1 1/ / / M16 x 2 23 F9 Bolt circle diameter, endcap flange (S2) H1 Overall height (excludg valve) H2 Height to centerle H3 Foot height H4 Overall height (with valve) L1 Overall length L2 Overall length, non-rotatg L3 Shaft flange to counterbalance valve L4 Mountg length L5 Shaft flange to mountg hole W1 Mountg width W2 Overall width P1, P2 Ports, housg V1, V2 Ports, valve ch ISO-11926/SAE Series of ports. Sizes are 7/16. See drawgs for details Specification charts are for general reference only. Consult drawg for actual values and tolerances. 13
14 SHAFT FLANGE ENDCAP FLANGE L30 Specifications * Torque (A) Drive Torque Holdg Torque 3,000 psi 210 bar 3,000 psi 210 bar Moment Capacity (B) Cantilever Mount Straddle Mount 180 Straddle Mount Nm - Nm - Nm Radial Capacity (C) Axial Capacity (D) Displacement cc cc Approximate Weight , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,295, , , , , , ,155, ,750, , , , , , ,505, ,270, , , , , , , ,505, ,505, , , , * L Standard rotation is rotation is achieved by corporatg an ternal stop tube the 210 actuator. Contact Helac Corporation for more formation. 14
15 L30 Series, Foot Mount L30 Models * D1 Shaft and endcap flange diameter D2 Housg Diameter F1 F3 Mountg holes, shaft flange (F2: Quantity of mountg holes: 12) Bolt circle diameter, shaft flange ch / M16 x / M20 x / M22 x M24 x / M27 x / M27 x / M30 x / M30 x F4 Mountg holes, endcap flange, S2 (F5: Quantity of mountg holes: 12) ch 3/ M10 x / M16 x / M20 x / M22 x M24 x M24 x / M27 x / M27 x F6 Bolt circle diameter, endcap flange, S2 F7 Foot hole diameter H1 Overall height (excludg valve) H2 Height to centerle H3 Foot Height H4 Overall Height (with valve) L1 Overall length 180 L2 L3 Overall length, non-rotatg Shaft flange to counterbalance valve L4 Mountg Length 180 L5 360 Shaft flange to mountg hole W1 Mountg width W2 Overall width P1, P2 Ports, housg V1, V2 Ports, valve ch /8 M /4 M /8 M M /8 M /4 M /8 M /2 M ISO-11926/SAE Series of ports. Sizes vary from 7/16 to 3/4. See drawgs for details. ISO /BSPP G Series of ports. Sizes vary from 1/4 thru 1/2. See drawgs for details /2 M Specification charts are for general reference only. Consult drawg for actual values and tolerances. 15
16 SHAFT AND MOUNTING FLANGE L30 Specifications * Torque (A) Drive Torque 3,000 psi 210 bar 17, , , , , , , , , Holdg Torque 3,000 psi 210 bar 43, , , , , , , , , Moment Capacity (B) S1 Option, Cantilever Mount - Nm 45, , , , , , , , , Radial Capacity (C) 4, , , , , , , , , Axial Capacity (D) 3, , , , , , , , , Displacement cc cc Approximate Weight , , * L standard rotation is rotation is achieved by corporatg an ternal stop tube the 210 actuator. Contact Helac Corporation for more formation. 16
17 L30 Series, Flange Mount L30 Models * D1 Overall flange diameter D2 Pilot diameter D3 Shaft and endcap flange diameter D4 Housg diameter F1 Mountg holes, shaft flange (F2: Quantity of mountg holes: 12) ch / M16 x / M20 x / M22 x M24 x / M27 x / M27 x / M30 x / M30 x F3 Bolt circle diameter, shaft flange F4 Mountg holes, housg flange 3/8 M10 1/2 M12 5/8 M16 3/4 M20 7/8 M22 1 M24 1 1/8 M27 1 1/4 M30 1 1/4 M30 (F5: Quantity of mountg holes: 12) F6 Bolt circle diameter, housg flange H1 Centerle to valve top L1 Overall length L2 Overall length, non-rotatg L3 Shaft flange to counterbalance valve L4 Mountg flange thickness L5 Shaft flange to mountg flange face P1, P2 Ports, housg V1, V2 Ports, valve ch ISO-11926/SAE Series of ports. Sizes vary from 7/16 to 3/4. See drawgs for details. ISO /BSPP G Series of ports. Sizes vary from 1/4 thru 1/2. See drawgs for details. Specification charts are for general reference only. Consult drawg for actual values and tolerances. 17
18 T20-60 MODEL, 200 ROTATION T20 Specifications Torque (A) Drive Torque Holdg Torque T20-25, 45 MODELS, 220 ROTATION 3,000 psi 210 bar 3,000 psi 210 bar 25, , , , Standard Rotation , , Moment Capacity (B) Straddle mount - Nm 37, , , Radial Capacity (C) 4, , , Axial Capacity (D) 4, , , Displacement 3 cc Approximate Weight
19 T20 Series T20 Models D1 Housg diameter D2 Optional sple adapter diameter F1 Shaft sple, both ends ch Inch models comply with ANSI B92.1. See Drawgs for specific details. Metric models comply with DIN5480. See Drawgs for specific details. F2 Shaft mountg hole size, both ends ch F3 Foot hole diameter ch H1 Overall height (excludg valve) H2 Height to centerle H3 Overall height (cludg valve) L1 L2 Overall length, rotatg, with optional adapter Overall length, rotatg, without optional adapter L3 Overall Length, non-rotatg L4 Mountg length L5 Mountg hole to end of shaft L6 Shaft extension L7 Sple length L8 Optional sple adapter length L9 Housg end to valve W1 Mountg width W2 Overall foot width P1, P2 Ports, housg ch V1, V2 Ports, valve / M16 x / M20 x /16-18 (Quantity 3).50 on 1.50 Bolt circle (Quantity 1) / M22 x ISO-11926/SAE Series of ports. Sizes vary from 7/16 to 9/16. See drawgs for details. ISO /BSPP G Series of ports. Sizes vary from 1/8 thru 1/4. See drawgs for details. Specification charts are for general reference only. Consult drawg for actual values and tolerances. 19
20 Wor around the world to serve you. To contact your regional Sales Representative or Distributor, go to Helac Corporation 225 Battersby Avenue, Enumclaw, WA USA (US and Canada) (Worldwide) helac@helac.com, IMPORTANT NOTICE: Helac Corporation does not assume any responsibility beyond the design and performance of its rotary actuator products due to the unlimited variety of operatg conditions and applications. The customer is solely responsible for the fal selection of any Helac Corporation product or system, and it s suitability for the application question. The overall tegrity of the stallation, and the applications safety and compliance with dustry standards and warng requirements, are the ultimate responsibility of the customer. The customer is solely responsible for the engeerg of matg structures, fasteners, and other associated components related to the stallation of the product and it s ultimate application. Helac Corporation recoends that prototype testg be conducted to verify stallation tegrity. Testg with applied loads that equal or exceed the static and dynamic load frequency and tensity are recoended to determe the suitability of the actuator for the application Helac Corporation. All rights reserved. Specifications subject to change without notice. U.S. patent # HA PCB/02.14
Helical Hydraulic Rotary Actuators
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
More informationHelical, hydraulic rotary actuators
Helical, hydraulic rotary actuators Helac product lines meet your individual needs 1 L-Series LoadBear Offers integral bearings to carry heavy axial and side loads. Available with large diameter shaft
More informationHelical Hydraulic Rotary Actuators. Series L and T
Helical Hydraulic Rotary Actuators Catalog HY341000 Operating Technology Industries Served: Agriculture Construction Energy Marine Material Handling Military Mining Truck/Trailer and many others Helac
More informationHEAVY LIFTERS FOR MATERIAL HANDLING
HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars
More informationPARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationSaf-T-Gard Hydraulic Actuator MH 60 Series
Description Saf-T-Gard Hydraulic Actuator MH 60 Series for use with ", 4, 5 and 6" nomal gate valves The The Cameron MH Hydraulic Actuator product le has been developed by usg the superior features of
More informationLOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
More informationBenefits and Selection Table
105 Benefits and Selection Table D-M-E s Internal Latch Lock Allows Precision Control of Mold Plate Latchg Operation D-M-E s unique ternally-mounted latch lock mechanism adapts a number of mold base sizes
More informationTorque Limiter Series WT Overview. Torque Limiter Series WT
Torque Limiter Series WT Overview Torque Limiter Series WT Torque Limiter Series WT For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design
More informationVIKING HEAVY DUTY PUMPS SERIES 4193 AND 493 STEEL EXTERNALS FEATURES
VIKING HEAVY DUTY PUMPS SERIES 49 AND 49 FEATURES Section 54 Page 54. Issue C Pressure Range 2 Temperature Range Viscosity Range 250 PSI ( BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU
More informationHELICAL HYDRAULIC ROTARY ACTUATORS
T30-27 Service and Repair Manual HELICAL HYDRAULIC ROTARY ACTUATORS HA T30-27SM/12.10 INTRODUCTION Table of Contents Introduction Table of Contents... 2 Operation Technology... 3 General Safety Guidelines...
More informationPARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
More informationGRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION
GRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION A Wide Range of Sizes, Jaw Styles, Jaw Travels, and Grippg Forces for Most Any Grippg Requirement INDEX: Parallel Jaw Motion Pages -1 to -19 18 Angular
More informationAUTOGARD 820 REMOTE RESET INSTALLATION AND MAINTENANCE
820 Remote Reset (Page 1 6) AUTOGARD 820 REMOTE RESET AND MAINTENANCE Item # Description 1 Module Reset P 2 Pressure Plate 3 Pn 4 Cylder Bearg 6 Circlip 7 S1 Hub 8 Guide Screw 9 Return Sprg 10 Guide Screw
More informationSERIES GRK PARALLEL GRIPPERS
GRK SERIES GRK PARALLEL GRIPPERS Ideal for Assembly and Robotics Highest Grip Force Its Class Precision Jaw Movement High Moments Highest Grip Force to Height Ratio Precision Jaw Movement Wear Compensatg
More informationVIKING HEAVY DUTY PUMPS
SERIES 495 STANDARD CONSTRUCTION Section 44 Page 44. Issue D FEATURES Range Temperature Range Viscosity Range 250 PSI (7 BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU ( cst to cst) 00
More informationSPH Series GAM CAN, JUST ASK!
SPH Series GAM CAN, JUST ASK! - Highest Precision Class The SPH is GAM s latest solution for today s demanding motion control challenges. Available in six frame sizes and nominal torque ratings ranging
More informationProgram Center Distance Change
Introduction Program 60-146--Center Distance Change When the coefficient of thermal expansion of the material used for gears is different from the coefficient for the mountg or housg material, it is necessary
More informationHelical Hydraulic Rotary Actuators. L30 Series Service & Repair Manual
Helical Hydraulic Rotary Actuators Table of Contents Table of Contents Introduction Table of Contents... 2 Product Introduction... 3 General Safety Guidelines... 4 Product Identification... 4 Theory of
More informationHelical Hydraulic Rotary Actuators. L20 Series Service & Repair Manual
Helical Hydraulic Rotary Actuators Table of Contents Table of Contents Introduction Table of Contents... 2 Product Introduction... 3 General Safety Guidelines... 3 Product Identification... 4 Operation
More informationSMITH VALVE. The Solid Collection. High Pressure Integral Flanged Gate, Globe & Check Valves
SMITH VALVE The Solid Collection The Longest Lastg Le of Integrally Flanged, Round Bolted RTJ Bonnet, Full Bore, Gate, Globe & Check Valves High Pressure Integral Flanged Gate, Globe & Check Valves Flanged
More informationVariable displacement axial piston pumps,
ariable displacement axial piston pumps, for open circuit DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) MAX SPEED 3000 min -1 PRESSURE Max. continuous Max. intermittent
More informationHelical Hydraulic Rotary Actuators. L10 Series Service & Repair Manual
Helical Hydraulic Rotary Actuators Table of Contents Table of Contents Introduction Table of Contents... 2 Product Introduction... 3 General Safety Guidelines... 4 Product Identification... 4 Theory of
More information30' BOOM 13' 8" (4166) 24' BOOM 11' 8" (3556) 1' 8-1/2" (521) 3' 8-1/2" (1129) 15' 9-1/2" (4813) 17' 9-1/2" (5421)
INDUSTRIAL CRANE Dimensions 10' 10" (3302) 9' 4" (2845) 6' (1829) TRACK 7' (2134) A B 24' BOOM 11' 8" (3556) 1' 8-1/2" (521) 30' BOOM 13' 8" (4166) 3' 8-1/2" (1129) C 15' 9-1/2" (4813) 17' 9-1/2" (5421)
More informationVIKING MOTOR SPEED INTERNAL GEAR PUMPS
VIKING MOTOR SPEED Series Description Vikg s Motor Speed series ternal gear pumps represent a technological advance the science of flow. Through new techniques of feedg the rotor and idler, Vikg has achieved
More informationStafford, Texas USA. 55,000 square feet ISO 9001:2008 API 6D CE/PED ISO/TS API Q1
F L O A T I N G B A L L V A L V E S JAG flocomponents USA, Inc Stafford, Texas USA 55,000 square feet ISO 9001:008 API 6D CE/PED ISO/TS 9001 API Q1 JAGf lo s wholly owned Dalian, Cha facility uses state
More informationDimensions Turning Radius (6.4m) 2 Wheel Steer /2 (3.6m) 4 Wheel Steer
INDUSTRIAL CRANE Dimensions Turng 20 11 (6.4m) 2 Wheel Steer 11 10-1/2 (3.6m) 4 Wheel Steer 14'0" 14 0 (4267) (4267) 12' 1-3/4" (3.7m) 7' 8-1/2" (2350) 6' 3-1/4" (1911) TAILSWING Note: ( ) Reference dimensions
More informationCatalog PR-99. Tri-Clover. PR Series Positive Rotary Pump
Catalog PR-99 Tri-Clover PR Series Positive Rotary Pump PR - The Pump that was designed with the Processor md The Tri-Clover PR le was designed to overcome many of the traditionally troublesome operatg
More informationButterfly Valves. Quality Valves at Low Cost
Butterfly Valves Quality Valves at Low Cost About Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and
More informationLOAD CHARTS NBT45 85% STABILITY ON OUTRIGGERS
LOAD CHARTS NBT45 85% STABILITY ON OUTRIGGERS 295995 SERIAL NUMBER 1 2 TABLE OF CONTENTS GENERAL NOTES...4-5 LIFTING AREA DIAGRAM / LINE PULLS & REEVING INFO / HOIST PERFORMANCE... 6 RANGE DIAGRAM w/ EXTENSION...7
More informationVISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
SERIES 493, 493 Section 34 Page 34. TBLE OF CONTENTS Features & Benefits...2 Specifications...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Mountg Options...4 Dimensions
More informationT Series with Parking Brake (185-)
T Series with Parking Highlights Description Eaton s latest offering in LSHT motor technology is the new T Series Motor with Parking Brake. T Series Motor with Parking Brake utilizes brake pads that rotate
More informationMotorized Pulley 500L, 500M & 500H, Ø in. (501 mm)
Motorized Pulley 500L, 500M & 500H, Ø 19.72. (501 mm) Our 19.72 diameter Motorized Pulley range offers three different performance levels for BULK applications: - L for Light duty - M for Medium duty -
More informationNational Crane Series NBT60 Product Guide
National Crane Series NBT Product Guide ASME B30.5 Imperial % Features 39,01 m (128 ft) five-section full power boom 54,4 t ( USt) at 2,44 m (8 ft) Self-lubricatg Easy Glide wear pads Hydraulically removable
More informationTorque Limiter T-Series Overview. Autogard Torque Limiter T-Series
Torque imiter T-Series Overview Autogard Torque imiter T-Series Torque imiter T-Series For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More informationIn addition to the SPEC products described in this catalog,
In addition to the SPEC products described this catalog, Associated Sprg Raymond a worldwide leader the design, manufacture and sale of sprgs also offers a full le of struts, hardware, tool & die components:
More informationW1500 SERIES HYDRAULIC PUMP
W1500 SERIES HYDRAULIC PUMP Concentric AB Innovation in Hydraulics PRESSURE (P1) 276 BAR (4000 PSI) (P2) 300 BAR (4400 PSI) SPEED 3300 RPM Min. 500 RPM at 4000 PSI (276 BAR) Continuous EFFICIENCY Overall
More informationTandler. ServoFoxx Servo Gearheads
Tandler ServoFoxx Servo Gearheads ServoFoxx Inline and Right Angle Planetary Servo Gearheads The Tandler ServoFoxx series of servo gearheads provide the ultimate in precision motion control for highly
More informationPNEUMATIC TIRE FORKLIFT 7000 KG CAPACITY LP DIESEL MODELS THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS
PNEUMATIC TIRE FORKLIFT 7000 KG CAPACITY LP DIESEL MODELS THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS EXPECT PRODUCTIVITY. EXPERIENCE ENHANCED PERFORMANCE WITH A POWERFUL TURBO-CHARGED ENGINE Serious
More informationButterfly Valves. Quality Valves at Low Cost
Butterfly Valves Quality Valves at Low Cost About Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and
More informationLOAD CHARTS NTC55 85% STABILITY ON OUTRIGGERS
LOAD CHARTS NTC 5% STABILITY ON OUTRIGGERS 0443 SERIAL NUMBER GA24146 1 TABLE OF CONTENTS GENERAL NOTES... 6-7 WT. REDUCTIONS / LINE PULLS & REEVING INFO / HOIST PERFORMANCE... LIFTING AREA DIAGRAM / BASKET
More informationT 8075 EN Type 3591 Globe Valve ANSI version
T 8075 EN Type 3591 Globe Valve ANSI version Application Matenance-friendly cage valve for process engeerg applications with high dustrial requirements Valve size NPS 10 to 32 Pressure ratg to 900 Temperatures
More informationELEVATOR IMPACT PROTECTION
ELEVATOR IMPACT PROTECTION Oleo is a leadg expert energy absorption technology supplyg solutions to the elevator, dustrial and rail sectors. Oleo elevator buffers are designed to protect people and equipment
More informationTooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P
Series 5H and 55H-P Series 5H and 55H-P Pressure Applied Tooth Clutch Stationary Cylinder for Dry Operation or in Oil Features Tooth clutch gives positive drive with no slip Shielded bearings need no lubrication
More informationBX & BXR Series HYDRAULIC BREAKERS
BR TE BX & BXR Series HYDRAULIC BREAKERS BX Series Hydraulic Breaker Model BX40 BX30 BX20 BX15 Sizg the Breaker based on Production Rates The values are non-bdg guideles and will vary dependg on mache,
More informationPlanetary Servo Reducers
VRAL Series ABLE Planetary Servo Reducers Industry Standard Mountg Dimensions Best-In-Class Standard Backlash ( 5 arc-m) 20,000 Hour Service Life Available Selection Guides Match Reducers to Motors In
More informationMotorized Pulley 500L, 500M & 500H, Ø in. (501 mm)
Motorized Pulley 500L, 500M & 500H, Ø 19.72. (501 mm) Our 19.72 diameter Motorized Pulley range offers three different performance levels for BULK applications: - L for Light duty - M for Medium duty -
More informationBoom truck 55 tons. national nbt50/55. BOOM LENGTHS: 32 to 128 ft JIB LENGTHS: 26 to 45 ft JIB OFFSETS: 0-30
Boom truck tons national nbt/ BOOM LENGTHS: 32 to 128 ft JIB LENGTHS: 26 to 45 ft JIB S: 0-30 NOTES: National Crane Series NBT Product Guide ASME B30.5 Imperial % Features 31,1 m (102 ft) four-section
More informationGM25 Motor Dimensional Information
GM25 Series Birotational Hydraulic Motors GM25 Series hydraulic motors are designed for low noise, high efficiency birotational operation. Cast iron construction insures reliability and strength. A number
More informationPneumatic process valve, Y-pattern with pneumatic actuator of stainless steel DN 15-50
with pneumatic actuator of staless steel Pneumatic process valve, Y-pattern with pneumatic actuator of staless steel DN 15-50 ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets Piston actuator
More informationNTC55 Product Guide. Features. ASME B30.5 Imperial 85% 49,9 t (55 USt) capacity at 2,44 m (8 ft)
NTC Product Guide ASME B30.5 Imperial % Features 49,9 t ( USt) capacity at 2,44 m (8 ft) 39,01 m (128 ft) five-section, full-power boom Hydraulically removable counterweight system with multiple configurations
More informationComplete Solutions for Engineered Valves
at.no.:egg at.no.:efv at.no.:efsv PI 6 Gate Valve omplete Solutions for Engeered Valves at.no.:epv at.no.:ev No.999 Xiangjiang Road, Suzhou New istrict,p.r. ha Post ode:215129 Tel: 8651266651365 Fax: 8651266651360
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Contents Contents Page PGP/PGM500 Characteristics... 3 PGP502 Ordering... 4 PGP502 Performance curves... 5
More informationXPline. Hydraulic breakers
Hydraulic Breakers XPle Hydraulic breakers Hydraulic breakers are today s most versatile workg tool for excavators. It is the ma actor different applications when operatg on hard ground, a must, when it
More informationusing Class 2-C (Centralizing) tolerances. Jack lift shaft lead tolerance is approximately 0.004" per foot.
WORM GEAR JACK MODELS WORM GEAR ACTIONJAC JACKS Jack systems are ruggedly designed and produced in standard models with load handling capacities from 1/4 ton to 100 tons. They may be used individually
More informationButterfly Valves. Quality Valves at Low Cost
utterfly Valves Quality Valves at ow Cost bout Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas,
More informationA Series Walkie Counterbalanced Stacker. with capacities of 2,000 to 4,000lbs. The World of Hangcha
A Series Walkie Counterbalanced Stacker with capacities of 2,000 to 4,000lbs The World of Hangcha A M E R I C A Walkie Stacker Series The Walkie Reach, Straddle, or Counterbalance Stacker series can handle
More informationCONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS
CONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM LPV PUMPS FEATURES AND BENEFITS The LPV line of Variable
More informationCONTINENTAL HYDRAULICS PVER VANE PUMPS
CONTINENTAL HYDRAULICS PVER VANE PUMPS 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM PVER PUMPS FEATURES AND BENEFITS The PVER series vane pumps are variable
More informationHighest Performance: SPH Series
Highest Performance: SPH Series The SPH series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special
More informationDURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
More informationHighest Performance: SPH Series
Highest Performance: Series The series features helical gearing which brings a whole new level of power and precision to GAM s already extensive portfolio of gear reducer technology. With special attention
More informationMKD04 COMPACT MOTORS
MKD04 COMPACT MOTORS T E C H N I C A L C A T A L O G Compact motors MKD04 POCLAIN HYDRAULICS Methodology : This document is intended for manufacturers of machines that incorporate Poclain Hydraulics products.
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More informationBX & BXR Series HYDRAULIC BREAKERS
BX & BXR Series HYDRAULIC BREAKERS www.rockbreaker.com BX Series Hydraulic Breaker Model BX40 BX30 BX20 BX15 Sizg the Breaker based on Production Rates The values are non-bdg guideles and will vary dependg
More informationVariable Displacement Plug-In Motor A6VE
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series
More informationVIKING HEAVY DUTY PUMPS SERIES 4197 STAINLESS STEEL FEATURES
VIKING HEAVY DUTY PUMPS FEATURES Section 64 Page 64. s Cutaway View 0--0 GPM Sizes (2-4.5-7 m³/hr) s Cutaway View 5-50-75 GPM Sizes (8--7 m³/hr) Pressure Range Temperature Range Viscosity Range 0 PSI (4
More informationENGINEERED SOLUTIONS Based on Reali-Slim Bearings A N I L L U S T R A T E D M O U N T I N G G U I D E
ENGINEERED SOLUTIONS Based on Reali-Slim Bearings A N I L L U S T R A T E D M O U N T I N G G U I D E Reali-Slim thin-section bearings have contributed to reductions in weight and size in thousands of
More informationSpool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.
Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool
More informationHelical Hydraulic Rotary Actuators. T20 Series Service & Repair Manual
Helical Hydraulic Rotary Actuators Table of Contents Table of Contents Introduction Table of Contents... 2 Product Overview... 3 Operation Technology... 4 General Safety Guidelines... 5 Product Identification...
More informationDELTA Mixers Durable, Versatile, Dependable
ELTA Mixers urable, Versatile, ependable ELTA Equipment manufactures a wide selection of dustrial mixers from 1/4 HP to 3 HP for tank volumes of 50 to 5000 gallons. ELTA Mixers are available air or electric
More informationRadial piston motor for heavy duty wheel drives MCR-W
Radial piston motor for heavy duty wheel drives MCR-W RE 15200 Edition: 09.2015 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationRadial piston motor for frame integrated drives MCR-A
Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationDaedal Precision Gearheads
Daedal Catalog 8085/US Introduction Quality, Performance, Reliability Parker are planetary gear reducers designed to excel in today s demanding servo motor applications. They offer a vast array of selectable
More informationSMITH VALVE. The Solid Collection. High Pressure Integral Flanged Gate, Globe & Check Valves
SMITH VALVE The Solid Collection The Longest Lastg Le of Integrally Flanged, Round Bolted RTJ Bonnet, Full Bore, Gate, Globe & Check Valves High Pressure Integral Flanged Gate, Globe & Check Valves Flanged
More informationISOMOVE. Mechanical actuators ISO 6431
ISOMOVE Mechanical actuators ISO 6431 ISOMOVE INDEX 2 Introduction 4 Mounting information and advices 6 10 40 14 20 63 25 80 29 33 Overall dimensions INTRODUCTION GENERAL FEATURES The ISOMOVE actuators
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125
More informationInstallation Instructions
Installation Instructions BW Seals RIS Seal Rubber in shear slurry seal Experience In Motion 1 Equipment Check 1.1 Follow plant safety regulations prior to equipment disassembly: lock out motor and valves.
More informationRadial piston motors for industrial applications MCR-D
Radial piston motors for industrial applications MCR-D MCR-E RE 15196 Edition: 02.2017 Replaces: 12.2013 MCR-D Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationL SERIES METAL MEMBRANE COUPLING L SERIES
Staless Steel Flexible Membranes Overload and nti-fly Protection ollars nti-orrosion Treatment Membrane Unit ssembly for Easeof Fittg E Fitted olts for alance Integrity F Scalloped Hubs to Maximize ore
More informationTAKE IT TO THE NEXEN LEVEL
TAKE IT TO THE NEXEN LEVEL INDUSTRIES SERVED Aerospace Automation Equipment Automotive Bottling CNC Machining Commercial Laundry Equipment Converting Conveying Food Processing Machine Tool Material Handling
More informationW1200 SERIES HYDRAULIC PUMP
W1200 SERIES HYDRAULIC PUMP HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide 2 Table of Contents Description Page Number W1200 Product Specifications and Performance
More informationSECTION THREE REELS. Heavy Duty Severe Duty Narrow Double Post High Capacity Large Capacity Shielded Specialty Accessories.
Heavy Duty Severe Duty Narrow Double Post High Capacity Large Capacity Shielded Specialty Accessories 48 Aleite Product Catalog Aleite reels are the standard for quality and durability the lubrication
More informationShaft-Hub-Connections
Stand: 14.01.2010 Shaft-Hub-Connections Shrink Discs Cone Clamping Elements Star Discs 36 Edition 2012/2013 RINGSPANN Eingetragenes Warenzeichen der RINGSPANN GmbH, Bad Homburg Table of Contents Introduction
More informationActivity Gears - VEX
Name: Date: Period: Introduction Activity 1.1.3 Gears - VEX You do not have to look far to see gears. You might not thk of an object such as a computer as havg a lot of movg parts, but the CD tray on your
More informationDouble-Row Ball Bearings, 5000 Series
Double-Row Ball Beargs, 5000 Series C M MRC double-row ball beargs are manufactured two ma types: C-type conrad construction and M-type maximum capacity with fillg notches. Each row has a 0 contact angle.
More informationlegris products are available from: Maryland Metrics
legris products are available from: Maryland Metrics 2003 2005 New Products atalog web: mdmetric.com email: sales@mdmetric.com push-to-connect fittgs 9000 safety coupler mi ball valves staless steel range
More informationSection 8. Copper Series
Section 8 opper Series Grooved ouplgs, Fittgs & omponents for opper Tubg... 164 Pressure Ratgs of opper Tubg... 164 Standard Roll Groove for U.S. Standard opper Tubg... 164 Grooved ouplgs & Flanges for
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationHighest Precision: SPL Series
Highest Precision: SPL Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the SPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
More information40,000 PSI EXIT CONTENTS NEXT
PSI "Your Waterblast Solutions Provider" Call us today or visit our website at wwwwaterblastcom Over the last several decades, Jetstream of Houston, LLP, a division of Federal Signal, has provided dustrial
More informationCSK One Way Bearing Clutches
A T R A I N D U S T R I A M O T I O N CSK One Way Bearg Clutches Overrunng Indexg and Backstoppg Clutches Formsprag and Stieber have been designg, manufacturg and deliverg dependable, long-lived, precision
More informationAMCB AccuStop TM. Clutch/Brake Combination Section F
Clutch/Brake Combination The Airflex AMCB AccuStop clutch/brake combination consists of an air-actuated disc clutch and a spring-applied disc brake. Engineered for small-to-medium tonnage ( to 0 ton),
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm
More informationPC-Series Precision Linear Actuators. Optimize Your Machine and Save Energy With Reliable, High Performance, Compact Actuators
PC-Series Precision Linear Actuators Optimize Your Machine and Save Energy With Reliable, High Performance, Compact Actuators Make the Change to Electric Enjoy superior performance and save time and energy
More informationPISTON MOTORS FOR CLOSED LOOP SYSTEMS types HMF/A/V/R-02
1-control optional swashing to 0 cc /rev 2-swash plate hydrostatic bearing 3-piston-slipper assembly 21 swash angle 4-housing monoshell for high rigidity 5-valve plate housing highly integrated 6-control
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More information