Tried and tested technology for perfect results: sawing and milling from FEIN.

Transcription

1 Sawg and Cuttg

2 Tried and tested technology for perfect results: sawg and millg from FEIN. High grade steel processg, buildg kitchens, locksmith work, metal processg and dustry FEIN jigsaws are designed perfectly for the high loads experienced when workg with steel and staless steel. As genue metal specialty tools, FEIN jigsaws mata a constant stroke and therefore constant cuttg speed even under extreme load levels. The sturdy metal housg and very heavy-duty gears make these legendary endurance maches, that often last decades. The FEIN range is supplemented by tools for pipe processg: hacksaws for pipes of up to max. 24, maly for plant construction and community supply connections. FEIN also manufactures special pipe millg maches for pipes with a diameter of up to approx. 118 for plant and pipele construction. Jigsaws and Hacksaws Page 235 Optimum cuttg speed with mimal wear. Construction Cutter Page 244 Remove old wdows with no dust or damage to the wall. Pipe Millg Maches Page 247 Robust cuttg technology from FEIN s pipe machg range. Sawg and Cuttg 233

3 Sawg and Cuttg FEIN saws and millg maches Tough and durable. Model ASt 638 ASte 638 ASte AStx AStxe STS 325 R Metal jigsaw with Metal jigsaw with Jigsaw for very tough Powerful hacksaw Powerful hacksaw Pneumatic hacksaw unsurpassed precision, robustness and service life. variable speed control for unsurpassed precision, robustness and service life. applications metal, staless steel and sulation material (sandwich). for pipes and profiled sections. for pipes and profiled sections with contuously variable stroke adjustment. for pipes and profiled sections. Page Technical specifications Power consumption () Strokes (rpm) 3,350 1,050 2, , Stroke of blade (mm) ¾ ¾ 1 2 ⅜ 2 ³ ₈ 2 ³ ₈ Operatg pressure (psi) 87 Air consumption (cfm) 51.2 Weight (lbs) Max. cuttg capacity Staless steel () ⅛ ¼ ⅛ Steel () ⁵ ₁₆ ⅜ 1 Alu / Copper, brass () ⅜ / ⅜ ⅝ / ⅜ ¾ / ½ Hard wood / Soft wood and plywood () Hard particle/fiberglass materials () Smallest radius 2 / 1 ⁹ ₁₆ 2 ⅜ / 2 4 / 2⅜ 1 / ¾ 1 ³ ₁₆ / 1 ³ ₁₆ 2 ⅜ / > 4 Steel/woods and plastics () ⁵ ₁₆ / ¼ ⁵ ₁₆ / ¼ 1 ³ ₁₆ / ⅝ Alu / brass () Pipes up to Ø () 24 * Profiles up to W x H () 11 ²⁷ ₆₄ x 21 ¹¹ ₁₆ 11 ²⁷ ₆₄ x 21 ¹¹ ₁₆ 11 ²⁷ ₆₄ x 21 ¹¹ ₁₆ ¾ / ½ Model MF Page 245 Extremely powerful construction cutter for dismantlg old wdows Technical specifications Power consumption () 1,200 No load speed (rpm) 7,000 Weight (lbs) 9.0 Diamond wheel Ø () 7 Cuttg depth () 0 2 * With cha extension. 234

4 Jigsaws Sawg can be an easy task. With FEIN jigsaws. For precise cuts steel (up to 1 thick) or wood (up to 4 thick) and for cuttg profiled sections or plastic, steel and ductile castiron pipes with a diameter of up to 24. FEIN jigsaws can t fail to impress due to their durability, optimum performance and firstclass results. What is their secret? In terms of stroke and gear loadg, they are consistently designed for tough applications the metal sector. The tegrated electronics ensure that FEIN jigsaws constantly mata their stroke settg at the required level even under heavy loads. For optimum cuttg speed and without excessive saw blade wear. Saw blades match perfectly to the job at hand. Professional accessories like the FEIN clamp and feed device for pipes and round material makes light work of even tough sawg jobs. Try them and see for yourself. Sawg and Cuttg

5 Jigsaws Jigsaws up to ⁵ ₁₆ Steel / 2 Wood ASt 638 Metal jigsaw with unsurpassed precision and service life. ASte 638 Metal jigsaw with variable speed for unsurpassed precision and service life. Technical specifications Model ASt 638 ASte 638 Power consumption Power output Strokes Stroke of blade Cable with plug Weight Max. cuttg capacity Staless steel Steel Alu / Copper, brass Hard wood / Soft wood and plywood Hard particle / Fiberglass materials Smallest radius Steel / Wood and plastics rpm ft lbs ,350 ¾ ⅛ ⁵ ₁₆ ⅜ / ⅜ 2 / 1 ⁹ ₁₆ 1 / ¾ ⁵ ₁₆ / ¼ ,050-2,600 ¾ ¼ ⅜ ⅝ / ⅜ 2 ⅜ / 2 1 ³ ₁₆ / 1 ³ ₁₆ ⁵ ₁₆ / ¼ Part Number Included price 2 packs of saw blades, 1 anti-chippg protector ASte 638: 1 Chip protection FEIN BENEFITS ASt 638 Extremely low levels of wear and matenance, even when used very demandg dustrial applications. Tool concept for optimum results metal, sulation materials (sandwich) and hard wood. ASte 638 Tool concept for optimum results metal, staless steel, sulation material (sandwich) and hard wood. Variable electronic speed control for optimum cuttg speed and saw blade service life. Excellent ergonomics. Precisely balanced weight distribution resultg outstandg smooth runng. Swarf removal can be switched between extraction or blowg. 230 V only. See page 237 for accessories 251,5 mm 172 mm 63 mm Measurements millimeters 236

6 Origal FEIN accessories for ASt 638, ASte 638 Saw blades For cuttg of different materials. Max material thickness see table Steel Wood Plastic Miscellaneous Length Qty pcs Part Number Sheet metal up to Non-ferrous metals gauge up to 17 gauge Up to 14 gauge, Staless steel up to 14 gauge Up to ⅜ ; Staless steel up to 12 gauge Plywood up to ⅛ Hard plastics up to ⅛ Hard plastics up to ⁵ ₁₆ Th-walled profiles, 4 5 up to 2 Brass, alumium, 3 ½ 5 copper sheets up to ¹ ₁₆ ; Hard particle boards, fibreglass, carton up to ⅛ ; Resopal up to ⅛ Insulation material up to 2 ¾ 4 ¾ 5 3 ½ 5 Up to 9 gauge Up to 1 Up to Plywood and hard Soft plastics 3 ½ 5 fibre-board, hard- up to ⁵ ₁₆ and soft wood up to 1, hard fibre-board up to ⅝ Up to 4 gauge Plywood and hard Soft plastics, fibre-board, hard polyamide wood up to 1 ⁹ ₁₆ ; up to 1 ¼ soft wood up to 2 Plywood and hard fibre-board, hard wood up to 2 ; soft wood up to 2 ⅜ Soft plastics, polyamide up to 1 ¼ Plastics ⅝ ; polyamide up to 1 ¼ Alumium up to 0 gauge Insulation boards more than ⅛ ; Hard particle boards ¾ Glass, ceramics, brick, fibreglass ½ ½ Up to 2 ⅜ Fiberglass up to ⅜ Drywall, porous concrete ⅛ General Accessories Tool Case Plastic, 17 ¾ x 12 ³ ₁₆ x 5 ⁵ ₁₆ Part Number Plastic box Box sert with lockable lid for small parts and accessories, suitable for tool case Shoe plate Long, for sawg corrugated sheet metal Part Number Anti-chippg protector Pack of 5 Part Number Chip protection For ASt(e) 638 Hose nozzle For the connection of FEIN Electric Power Tools with dust extraction dia. 1 ¼ 1 ¹ ₁₆ Part Number FEIN Turbo dust extractors Powerful wet and dry dust extractors for connectg power tools when workg the workshop and for assembly work. Tool spray Extends the service life of the saw blades. Part Number Cuttg paste Lubricatg agent for workg on sheet metal. Sawg and Cuttg Part Number Part Number Refer to the dust extractor chapter for detailed formation about FEIN dust extractors and dust free sandg. Part Number

7 Jigsaws Jigsaw up to 1 Steel ASte Jigsaw for very tough applications metal, staless steel and sulation material (sandwich). Technical specifications Model ASte Power consumption Power output Strokes Stroke of blade Cable with plug Weight Max. cuttg capacity Staless steel Steel Alu / Brass Hard wood / Soft wood and plywood Hard particle / Fiberglass materials Smallest radius Steel / Woods and plastics rpm ft lbs , ⅛ 1 ¾ / ½ 4 / 2 ⅜ 2 ⅜ / > 4 1 ³ ₁₆ / ⅝ FEIN BENEFITS Air-jet feature for unobstructed view of the cuttg le. Integrated coolant lubricant tank. Variable speed control for an optimal saw blade service life. 230 V only. See page 239 for accessories Part Number Included price 3 saw blades, 1 retag screw, 1 wrench set 321 mm 283 mm 81 mm Measurements millimeters 238

8 Origal FEIN accessories for ASte Saw blades Saw blades For cuttg of different materials. Max material thickness see table Steel Wood Plastic Miscellaneous Length Qty pcs Part Number Steel, staless steel up to 16 gauge Steel, staless steel up to ⁵ ₁₆ More than ³ ₁₆ Steel, staless steel up to 10 gauge Steel, staless steel up to 3 gauge Pipes and profiles with walls up to ⁵ ₁₆ and up to 3 ⅛ profile height More than ³ ₁₆ Up to 2 Plastics and fibreglass up to ⁵ ₁₆ Plastics and fibreglass more than ³ ₁₆ Plastics and fibreglass ⁵ ₁₆ Pipes and profiles made of plastic and fibreglass with walls ⁵ ₁₆ and up to 3 ⅛ profile height More than ³ ₁₆ Non-ferrous metals up to 15 gauge Non-ferrous metals, alumium up to ⁵ ₁₆ Non-ferrous metals, alumium more than ⁵ ₁₆ Non-ferrous metals up to ⅛ Non-ferrous metals, alumium up to ³ ₁₆ Pipes and profiles made of non-ferrous metal and alumium with walls ⁵ ₁₆ and up to 3 ⅛ profile height Pipes and profiles up to 3 ⅛ profile height, asphalt plates, brick, porous concrete Hollow sections up to 3 ½ Soft and hard wood up to 3 ½ Up to ⁵ ₁₆ Up to ⁵ ₁₆ Pipes and profiles up to 5 ½ profile height Up to 18 gauge Up to 18 gauge Soft and hard wood up to 3 ½ Plastics more than ½ Alumium more than ⁷ ₁₆ th-walled profiles with sulation serts up to 7 profile height th-walled profiles, up to 3 ½ profile height ½ 3 3 ½ ½ General Accessories Tool Case Metal 15 ¾ x 15 ¾ x 5 ¹ ₅ Handle Tool spray Extends the service life of the saw blades Cuttg paste Lubricatg agent for workg on sheet metal. Sawg and Cuttg Part Number Part Number Shoe plate Long, for sawg corrugated sheet metal Part Number Part Number Part Number

9 Hacksaws Hacksaws for pipes up to Ø 24 AStx Powerful hacksaw for pipes and profiled sections. AStxe Powerful hacksaw for pipes and profiled sections with variable stroke adjustment. Technical specifications Model AStx AStxe Power consumption Power output Strokes Stroke of blade Cable with plug Weight Max. cuttg capacity Pipes up to Ø Profiles up to W x H rpm ft lbs ⅜ * 11 ²⁷ ₆₄ x 21 ¹¹ ₁₆ ⅜ * 11 ²⁷ ₆₄ x 21 ¹¹ ₁₆ Part Number Included price 2 saw blades (type 063), 1 handle, 1 wrench set FEIN BENEFITS Ideally suited for cuttg pipes and profiles made of steel, cast-iron, autoclaved aerated concrete, and plastics. Clamp and feed device available for profiles and pipes from Ø 3 ¹ ₈ to Ø 24. Especially suitable for sandwich material and layers of different materials. AStxe Electronic speed control for optimal cuttg speed. * Cha extension available. Adjustable clampg devices permit mitre cuts up to 45 as well. AStx 649-1: 230 V only. See pages for accessories Measurements millimeters 240

10 Hacksaws Hacksaw for pipes up to Ø 24 STS 325 R Pneumatic hacksaw for pipes and profiled sections. Technical specifications Model Operatg pressure Air consumption Power output Strokes Stroke of blade Weight Max. cuttg capacity Pipes up to Ø Profiles up to W x H psi cfm rpm lbs STS 325 R , ⅜ * 11 ²⁷ ₆₄ x 21 ¹¹ ₁₆ Part Number Included price 2 saw blades (type 063), 1 wrench set, 1 handle, 1 hose couplg FEIN BENEFITS Ideally suited for cuttg pipes and profiles made of steel, cast-iron, autoclaved aerated concrete, and plastics. Clamp and feed device available for profiles and pipes from Ø 3 ¹ ₈ to Ø 24. Adjustable clampg devices permit mitre cuts up to 45 as well. Clamp and feed device available. Adjustable clampg fixtures. * Cha extension available. See pages for accessories Sawg and Cuttg Measurements millimeters 241

11 Origal FEIN accessories for AStx 649-1, AStxe 649-1, STS 325 R Saw blades Saw blades Non-ferrous Steel Miscellaneous Length Teeth per Thickness Weight Material metals and more than ch steel up to 56,000 lbs/ 2 56,000 lbs/ 2 and cast iron lbs Part Number x x Ø 3 ⅛ 8 21 ¹ ₁₆ 0.13 HSS x x Ø 3 ⅛ 8 16 ¹ ₁₆ 0.13 HSS x x Ø 6 ⅝ ¹ ¹ ₁₆ 0.13 HSS x x Ø 10 ¼ ¹ 15 ¾ 16 ¹ ₁₆ 0.27 HSS x x Ø 13 ¾ ² 19 ¾ 16 ⁵ ₆₄ 0.4 HSS x x Ø 17 ⅜ ² 23 ⅝ 16 ⁵ ₆₄ 0.46 HSS x x ¹ ₁₆ 0.17 HSS x 20 ⅞ 12 ¹ ₁₆ 0.37 HSS x (AL) Plastic 8 8 ¹ ₁₆ 0.13 HSS x (AL) Plastic 15 ¾ 8 ¹ ₁₆ 0.27 HSS PE pipes, porous concrete PE pipes, porous concrete * 11 ¾ 6 ⅝ ⅞ 6 ⅝ HD saw blades Special saw blades for cuttg steel and staless steel. HD saw blades are noted for their long service life and rapid sawg speed. Give them a try: it will pay off. Non-ferrous Steel Miscellaneous Length Thickness Weight Material metals and more than steel up to 56,000 lbs/² 56,000 lbs/² and cast iron lbs Part Number x x Ø 6 ⅝ ¹ 11 ⅞ ¹ ₁₆ 0.18 HD x x Ø 13 ¾ ² 19 ¾ ¹ ₁₆ 0.39 HD x x Ø 12 ¹³ ₁₆ * 20 ⅞ ¹ ₁₆ 0.38 HD x x Ø 10 ¼ ¹ 15 ¾ ¹ ₁₆ 0.38 HD x x Ø 10 ¼ ¹ 15 ¾ ¹ ₁₆ 0.38 HD x x Ø 17 ⅜ ² 23 ⅝ ¹ ₁₆ 0.46 HD TD saw blades TD saw blades are suitable for cuttg wet and dry pipes. They are noted for rapid sawg speed and for clean cuts. for ductile cast-iron pipes, also with cement Pipes dia. Length Coatg Thickness Weight mortar claddg and grey cast iron pipes lenght lbs Part Number x 3 ⅛ - 5 ⅞ ³ 12 ⅝ 10 ¼ ³ ₁₆ x ⅜ - 11 ⅞ ³ 19 ¼ 17 ⅛ * only with saw blade guide ¹ for use with the FEIN clamp and feed device or clampg device ² only with cha extension up to 440 mm dia., cha and bolt also required ³ only with the cha extension up to 440 mm dia., cha and bolt also required 242

12 Origal FEIN accessories for AStx 649-1, AStxe 649-1, STS 325 R General Accessories Clamp and Feed Device (W x D x H) 11 x 11 x 15 ½, designed for pipe diameter from 3 up to 15 ¾ Cleang Block Whetstone for diamond tools, 1 ⅝ x 6 ⅜ x 11 ⅞ Saw Blade Guide The Saw Blade Guide is used on pipe up to 12 ¾ diameter and blades up to 20 ¾ long. Guides blade to center of cuttg area STS 325 R Clutch Sleeve for Tool Part Number Part Number Rhombo for cleang the diamondcoated tools. Part Number Part Number Part Number Price cludes: 1 metal carryg case, 1 square socket ratchet (½ ), 1 wrench set, 1 tensiong ratchet with strap, 1 lockg screw, 1 retag p Pipe Clamp Designed for pipe diameter up to 6, also for angle cuts Free-Hand Support Tool Support to allow better handlg and more control while cuttg. Not for use with Pipe Clamps or Saw Blade Guide Protective Steel Jaws For use with Adjustable Strap Clamp (prevents damage to work surface 4 required) Part Number Part Number Pipe Clamp is designed for from 4 up to 12 ¾ diameter, up to 17 diameter with extension cha and bolt Part Number Tool Case Metal 27 x 9 ⁷ ₁₆ x 6 ⁵ ₁₆ Part Number Part Number Pipe Clamp is designed for T- and I-Beam stock with profiles up to 21 ⅝ high and 11 ⅜ wide Part Number Splittg Wedge Prevents the jammg of the saw blade Part Number Tool Spray Extends the tool's metal workg service life Part Number Sawg and Cuttg Cuttg Paste Lubricatg agent for workg on sheet metal. Part Number

13 Construction Cutter Removg wdows quickly FEIN construction cutter. Clean, quick, no damage and not too much dust or time-consumg rework removg old wdows no longer brgs with it unpleasant side effects. The FEIN construction cutter MF with special diamond wheel uses just one powerful cut, to cut through plaster, masonry, cement, tiles and metal bracgs. Cut with mimum distance to the old wdow frame, parallel to the outer wall. Dust is effectively collected a closed contaer. The great benefit is you can work very quickly and with very low tool costs. In brief: once you ve worked with a FEIN construction cutter, you will never want to return to laborg with a saber saw, angle grder or chisel. The FEIN construction cutter is also suited for dust-free cuts through tiles, natural stone floorg and stair slabs. The FEIN SuperCut Construction is the ideal addition to the construction cutter and the recommended tool for cuttg wdow frames.

14 Construction Cutter Construction Cutter 1,200 W MF Extremely powerful construction cutter for dismantlg old wdows. Technical specifications Model MF Power consumption Power output No load speed Cable with plug Weight Diamond wheel Ø Cuttg depth rpm ft lbs 1, , Part Number Included price 1 metal tool case, 1 diamond wheel Ø 7 FEIN BENEFITS Precise cuts without damagg the walls. Cut passes with mimal clearance along walls. Dust-free operation with dust extraction and closed suction contaer. HIGH-POWER-MOTOR. Top-quality diamond wheel. Ideal addition: FEIN SuperCut for cuttg wdow frames. Precise cuts. Cuttg depth can be precisely set by the depth stop. Cuts made with mimal clearance. Firm handle. See page 246 for accessories Sawg and Cuttg 110 mm 155 mm 210 mm 365 mm 180 mm Measurements millimeters 245

15 Origal FEIN accessories for MF General Accessories Diamond wheel Ø 7, Special design for MF Part Number FEIN Turbo dust extractors Powerful wet and dry dust extractors for connectg power tools when workg the workshop and for assembly work. Refer to the dust extractor chapter for detailed formation about FEIN dust extractors and dust free sandg. 246

16 Pipe Millg Maches Best possible results from expert technology FEIN pipe millg maches. FEIN pipe millg maches mean that your work is always safe, precise and reliable. Whether you are workg with cast or steel pipes for oil, gas or water as used for pipeles, public supply networks, power plants or dustrial systems. Tough conditions are when the FEIN pipe millg maches really show off FEIN s experience producg practical professional tools. For example, different gear ratios for each pipe material make possible ideal cuttg and advance speeds, which guarantees the economic use of HSS and carbide tipped tools. The two-cha system ensures accurate cuts on pipes with diameters of between 10 and 118. FEIN pipe millg maches are available electric or compressed air versions. The extra advantage is the electric motors are protected from explosions and meet the same safety requirements as the compressed air motors. In other words, even the electrically-powered pipe millg maches are perfectly suited to work on gas and oil pipeles. (You will fd more detailed formation about FEIN pipe millg maches our special brochure or onle at Sawg and Cuttg