11050 W. Little York Bldg F / Houston, Texas Phone - +1 (713) / Fax +1 (713)

Size: px

Start display at page:

Download "11050 W. Little York Bldg F / Houston, Texas Phone - +1 (713) / Fax +1 (713)"

Asher Day
5 years ago
Views:

Technical Specification Sgle Head Orbital Welder Pipe Size Range : 4 (102) to fite Travel Speed Range : 0 200 (5m) / m Oscillation Speed Range : 0 138 (350 cm) / m Vertical Movement

360 deg with 0.1deg precision Weight: 22 lbs (10Kg) Length: 8.00" (203) Width: 8.50" (216) Height: 9.

8 (350) Controllg Features RISC Based Multiprocessor Proprietary Real-Time OS Real-Time Weldg Data Monitorg & Acquisition User Friendly Remote Pendant Control Absolute Position

Position Dependent Weldg Parameters Arc voltage/power Arc current Wire feed speed Orbital travel speed Oscillation speed Oscillation width Oscillation dwell time Weldg Head angle

2 Technical Specification Sgle Head Orbital Welder Pipe Size Range : 4 (102) to fite Travel Speed Range : (5m) / m Oscillation Speed Range : (350 cm) / m Vertical Movement Range : 2 (51 ) motorized Horizontal Movement Range : 2 (51) motorized Head Angle Range : 26 deg ( ) motorized Oscillation Dwell Range: 0 to 1 sec Position Measurement Range: 360 deg with 0.1deg precision Weight: 22 lbs (10Kg) Length: 8.00" (203) Width: 8.50" (216) Height: 9.00" (229) Operatg Temperatures: 20 to +45 deg C (Extreme Range: -40 to +55deg C) Clearance Required: 13.8 (350) Controllg Features RISC Based Multiprocessor Proprietary Real-Time OS Real-Time Weldg Data Monitorg & Acquisition User Friendly Remote Pendant Control Absolute Position Measurement Position Dependent Real-Time Parameter Control Automated Stick Out Control Automated Start/Stop Control Real-Time Weldg Data Weldg Powersouce and Wire Feeder Interface Position Dependent Weldg Parameters Arc voltage/power Arc current Wire feed speed Orbital travel speed Oscillation speed Oscillation width Oscillation dwell time Weldg Head angle System Highlights High Deposition Rate Low Repair Rate Lightweight, Compact, Solid and Robust 24 Hours Operations - For Every Day Use Ability To Weld All Passes and Processes With One System Short Trag Time and Familiarization Ease of use, Friendly and Flexible Design Great Backup and Support CWS Complete Weldg Services, Equipment, Personnel and Expertise

Technical Specification Dual Head Orbital Welder Pipe Size Range : 6 (152) to fite Travel Speed Range : 0 200 (5m) / m Oscillation Speed Range : 0 138 (350 cm) / m Vertical Movement Range :

1deg precision Weight: 26 lbs (10Kg) Length: 8.00" (203) Width: 9.50" (241) Height: 10.0" (254) Operatg Temperatures: 20 to +45 deg C (Extreme Range: -40 to +55deg C) Clearance Required: 13.

Absolute Position Measurement Position Dependent Real-Time Parameter Control Automated Stick Out Control Automated Start/Stop Control Real-Time Weldg Data Weldg Powersouce and Wire Feeder

System Highlights Fully Independent Dual Head Control High Deposition Rate Low Repair Rate Lightweight, Compact, Solid and Robust 24 Hours Operations - For Every Day Use Ability To Weld All

3 Technical Specification Dual Head Orbital Welder Pipe Size Range : 6 (152) to fite Travel Speed Range : (5m) / m Oscillation Speed Range : (350 cm) / m Vertical Movement Range : 2 (51 ) motorized Horizontal Movement Range : 2 (51) motorized Head Angle Range : 30 deg ( ) manual Oscillation Dwell Range: 0 to 5 sec Position Measurement Range: 360 deg with 0.1deg precision Weight: 26 lbs (10Kg) Length: 8.00" (203) Width: 9.50" (241) Height: 10.0" (254) Operatg Temperatures: 20 to +45 deg C (Extreme Range: -40 to +55deg C) Clearance Required: 13.8 (350) LoneStar Dual-Head Weldg Unit Controllg Features RISC Based Multiprocessor Proprietary Real-Time OS Real-Time Weldg Data Monitorg & Acquisition User Friendly Remote Pendant Control Absolute Position Measurement Position Dependent Real-Time Parameter Control Automated Stick Out Control Automated Start/Stop Control Real-Time Weldg Data Weldg Powersouce and Wire Feeder Interface Position Dependent Weldg Parameters Arc voltage/power Arc current Wire feed speed Orbital travel speed Oscillation speed Oscillation width Oscillation dwell time Weldg Head angle System Highlights Fully Independent Dual Head Control High Deposition Rate Low Repair Rate Lightweight, Compact, Solid and Robust 24 Hours Operations - For Every Day Use Ability To Weld All Passes and Processes With One System Short Trag Time and Familiarization Ease of use, Friendly and Flexible Design Great Backup and Support CWS Complete Weldg Services, Equipment, Personnel and Expertise

Clampg Pipe Facg Mache Length 72 1829 Width 36 914 Height 36

are he fastest cuttg, most versatile and user friendly

Years of experience and the highest quality components are

Quickly adjustable from 6" through 14 2.

4 PFM 6-14 ODC PFM 6-14 ODC - O.D. Clampg Pipe Facg Mache Length Width Height Weight 3000 lbs 1364 kg Dyna Torque's Pipe Facg Maches are he fastest cuttg, most versatile and user friendly maches on the market today. Years of experience and the highest quality components are corporated to every unit. Standard Features 1. Quickly adjustable from 6" through Repetitive, concise bevels 3. Easily sets up to any bevel configuration (cludg modified "J bevel, any automatic weldg bevel and transition bevels) 4. Brush adapters elimate both ternal and external manual buffg, grdg or sandg

PFM 16-32 Length 108 2743 Width 55 1219 Height 57 1448 Drive Section 2450 lbs 1110 kg 16 24 Clamp Section 420 lb 190 kg 24 32 Clamp Section 840 lb 381 kg Dyna

Years of experience and the highest quality components are corporated to every unit. Standard Features 1. Quickly adjustable from 16" through 36 2.

5 PFM Length Width Height Drive Section 2450 lbs 1110 kg Clamp Section 420 lb 190 kg Clamp Section 840 lb 381 kg Dyna Torque's Pipe Facg Maches are the fastest cuttg, most versatile and user friendly maches on the market today. Years of experience and the highest quality components are corporated to every unit. Standard Features 1. Quickly adjustable from 16" through Repetitive, concise bevels 3. Easily sets up to any bevel configuration (cludg modified "J bevel, any automatic weldg bevel and transition bevels) 4. Brush adapters elimate both ternal and external manual buffg, grdg or sandg PFM 1632

PFM 3657 (optional 2457) PFM 36-57 (pipe range 36 57 ) - optional 24-57 (pipe range 24 57 ) Length 210 2743 Width 70 1778

lb 544 kg Dyna Torque's Pipe Facg Maches are the fastest cuttg, most versatile and user friendly maches on the market today.

Quickly adjustable from 36" through 57, optional from 24 2. Repetitive, concise bevels 3.

6 PFM 3657 (optional 2457) PFM (pipe range ) - optional (pipe range ) Length Width Height Drive Section 6500 lbs 2948 kg Clamp Section 840 lb 381 kg OPTIONAL CLAMP SECTION Clamp Section 1200 lb 544 kg Dyna Torque's Pipe Facg Maches are the fastest cuttg, most versatile and user friendly maches on the market today. Years of experience and the highest quality components are corporated to every unit. Standard Features 1. Quickly adjustable from 36" through 57, optional from Repetitive, concise bevels 3. Easily sets up to any bevel configuration (cludg modified "J bevel, any automatic weldg bevel and transition bevels) 4. Brush adapters elimate both ternal and external manual buffg, grdg or sandg

Load sense 106. 48. 70. 2750lbs. 3750lbs.

7 Electric Hydraulic Power Unit Power Unit Specifications Length Width Height Dry Weight Wet Weight Voltage Frequency Full Load Amps Start Up Amps Hydraulic Fluid Capacity Motor Horsepower Ma Pump Secondary Pump: Pressure Out Return Load sense lbs. 3750lbs. 240/480 60Hz 89A 150A 140 gal 75 hp PVM98 Optional ¾ male 1 male 3/8 male kg 2129 kg 240/480 60Hz 89A 150A 529 l 56 KW Notes: VickersTM Hydraulics Toshiba TM Electric Power Units

106. 48. 70. 2900 lbs. 4700 lbs. 105 gal.

8 Diesel Hydraulic Power Unit Power Unit Specifications Length Width Height Dry Weight Wet Weight Diesel Fuel Capacity Hydraulic Fluid Capacity Enge Horsepower Ma Pump: Secondary Pump: Pressure Out Return Load sense lbs lbs. 105 gal. 105 gal 75 hp PVM98 Optional ¾ male 1 male 3/8 male kg 2129 kg 397 l 397 l 1905 kw Notes: VickersTM Hydraulics John Deere TM and Deutz TM Diesel Power Units

Dyna Torque's Internal Leup Clamps are the most versatile and user friendly clamps on the market today. Years of experience and the highest quality components are corporated to every unit.

9 Dyna Torque's Internal Leup Clamps are the most versatile and user friendly clamps on the market today. Years of experience and the highest quality components are corporated to every unit. Distguishg Features: Available sizes 6 60 Clamps will cover two pipe sizes by use of conversion kits Standard clamps are adjustable up to.500 wall thickness; modified clamps are available for heavier wall pipe. Powered travel drive available on models For efficient operation, the compressed air pressure should be PSi ( Bar) at 40 CFM Maximum safe workg pressure is 225 PSI (15.5 Bar) Internal Pneumatic Leup Clamp

10 IPLC Specifications Non Self-Propelled (Pull Type) Available with Copper Backg Pipe Size Length Width Height Weight Model lbs kg IPLC6 AWT IPLC IPLC IPLC IPLC IPLC Specifications Self-Propelled (Le Travel) Available with Copper Backg Pipe Size Length Width Height Weight Model lbs kg IPLC IPLC IPLC IPLC IPLC IPLC IPLC * * * * 681 IPLC IPLC IPLC * * 1340 IPLC * * 1545 Both Non Self-Propelled and Self-Propelled Clamps Require Compressed Air compressor For sizes 6 through 18 non self-propelled (pull type) require a 25CFM For sizes 10 through 36 self-propelled clamps require a 40CFM compressor For sizes 36 through 60 self - propelled clamps require a 90 CFM compressor All self - propelled clamps have a 25 degree grade capability Additional Cost Features Dual side drive of 35 degree grade compatibility Additional reach rod Vertical operation facility Staless steel pipe compatibility Storage skid Cement mortar lg De-icers

11 Onshore and Offshore Pipele Construction And many more.

12 Conduto Brazil 2008/9

13 Batam Indonesia 2009 Europe 2009

14 LoneStar Australia -2008/9 USA Domestic Projects -2008/9

15 Dyna Torque Technologies Inc. General Overview and Corporate Information Dyna Torque Technologies Inc. ( Dyna Torque ) is a private company corporated Houston, Texas, USA. Dyna Torque was formed 1997, recognizg that the pipele construction dustry depends on specialized equipment and service to successfully accomplish its tasks. Dyna Torque has put together a team with extensive experience engeerg, manufacturg, technical support and field service operations. Dyna Torque s mission is to design and manufacture novative, state-of-the-art equipment and team it up with experienced, knowledgeable staff to help our clients accomplish their goals ahead of schedule and under budget. From their ception, Dyna Torque has provided a full le of ternally designed and manufactured pipe facg maches and ternal le-up clamps. It also owns an extensive fleet of equipment available for lease coverg a wide range of pipe sizes. In 2001, the LoneStar automated weldg system was developed ternally. The system is an advanced automated weldg system designed to modernize traditional weldg techniques and processes by tegratg the latest software development and microprocessor technologies, combed with novative device design to offer a compellg digital weldg solution. In addition to the equipment offered to the pipele construction dustry, Dyna Torque specializes expert services related to the weldg of pipeles, whether the form of technical support for its equipment or providg a complete weldg solution. Headquartered Houston, Texas, USA, Dyna Torque Technologies, Inc. has subsidiaries and strategic partners Australia, Brazil, Croatia, Indonesia, Malaysia and European headquarters The Netherlands. It is our ultimate goal to provide and empower our clients with excellent products, services and the best possible weldg solution. With a track record of more than 11 years, Dyna Torque Technologies, Inc. s reputation is built on reliable products and services, a coitment to accountability and value, and its ability to serve its clients. For more formation, please visit our website at to see all of our services.

Table of Contents. Our Company Benders Mandrels Clamps Cradles, Belts, Head Irons Pipe Layers...

Table of Contents. Our Company Benders Mandrels Clamps Cradles, Belts, Head Irons Pipe Layers... 2014 Edition Table of Contents Our Company... 1 Benders... 2 Mandrels... 12 Clamps... 17 Cradles, Belts, Head Irons... 24 Pipe Layers... 28 Facers, Power Units... 30 Compressors, Pumps, Launchers... 32