LOW PROFILE PNEUMATIC PARALLEL GRIPPER
|
|
- Julius O’Brien’
- 6 years ago
- Views:
Transcription
1 LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both imperial and metric versions Optional mountg and port positions available Sprg assist on open or close available 1-2 day shippg Six million cycles mimum rated life (cludes sprg assist units) tegral jaw seals provide additional contamation protection and reta lubrication ground & hardened steel jaws have precision dowel holes for accurate mountg of jaw toolg and mimal jaw play jaws available 2 travel lengths for creased versatility hardcoated alumum body with precision mached jaw guides delivers rugged, wear resistant jaw support manifolds and additional mountgs are available for greater flexibility applications large hardened jaw drivg surfaces provide high grip forces and mimal wear plated & hardened steel jaw cover provides long life self-lubricatg cam driver provides long life without matenance cam driver is keyed for centerg repeatability solid state and proximity switches available for sensg jaw position (with -CU option) hard chrome piston rod for extended seal life large bore size provides high grip force a very compact package precision mached dowel holes on the body mountg surfaces provide accurate gripper mountg sprg assist available for higher grip force or part retention upon loss of air pressure piston & rod seals formulated for long life (800)
2 ORDERING DATA: SERIES GRIPPERS TO ORDER SPECIFY: Product Le, Series, Type, Grip, Jaw, Design No., Size, Total Jaw Travel, and Options required. SERIES Regular Duty GRIP High Force DESIGN NO. (See Note) 1 - Imperial 5 - Metric OPTIONS (OMIT IF NOT REQUIRED) PORTING OPTIONS L11-UB99 - Manifold option location 99 L11-UB37 - Manifold option location 37 (cludes GR3 option) UB48 - Port option location 48 SWITCH OPTION CU - Switch Ready MOUNTING OPTION GR3 - Mountg option location 37 SPRING ASSIST FSR2 - Sprg assist close FSE2 - Sprg assist open G R S x L11-UB99 PRODUCT LINE G - Gripper TYPE Short Parallel NOTE: Design number dicates imperial or metric mountg holes, dowel p holes, and ports. SERIES 6790 & JC1 SWITCHES PNP (Source) or NPN (Sk) Reed, VDC, 5 m cable JC1SDN-5 NPN (Sk) Solid State, VDC, 5 m cable JC1SDP-5 PNP (Source) Solid State, VDC, 5 m cable PNP (Source) or NPN (Sk) Reed, VDC, JC1SDN-K NPN (Sk) Solid State, VDC, JC1SDP-K PNP (Source) Solid State, VDC, PNP (Source) or NPN (Sk) Reed, VAC, SERIES 6790 & JC1SDx CORDSET CHART M8, 3 p, Straight Female Connector, 2 m cable M8, 3 p, Straight Female Connector, 5 m cable 1) JC1 Switches are rotated 90. LED faces side of switch bracket. 2) See switches & sensors Section for additional switch formation and complete specification. JAW Style 3 SERIES JC1STP 2 POSITION SWITCHES JC1STP-2 PNP (Source) Solid State, VDC, 2 m cable JC1STP-K PNP (Source) Solid State, VDC, ! BORE Diameter () 27 () 27 () 27 () 27 () (1.260) (1.260) (1.969) (1.969) (2.480) (2.480) MINIMUM TOTAL JAW TRAVEL Total Travel Per Bore Size () 4.5 (.177) 7 (.276) 6 (.2) 10 (.394) 8 (.315) 13 (.512) 19 (.7) 28 (1.102) (1.260) 44 (1.7) Options may affect unit length. See dimensional pages and option formation details. Refer to this product s onle catalog the product section for complete formation cludg related dimensions and additional specifications. See lk at bottom of this page. 4 ROUND INDUCTIVE PROXIMITY SWITCHES ( 27, 28, & ) PART NUMBER DESCRIPTION NPN (Sk) 2 meter cable PNP (Source) 2 meter cable 8 THREADED INDUCTIVE PROXIMITY SWITCHES ( & ) PART NUMBER DESCRIPTION NPN (Sk) 2 meter cable PNP (Source) 2 meter cable INDUCTIVE PROXIMITY SWITCH MOUNTING KITS KIT NUMBER 27 & Each kit cludes 1 target, 2 switch mountg brackets, and fasteners for mountg. Switches sold separately. SERIES JC1STP CORDSET CHART M8, 4 p, Straight Female Connector, 5 m cable 4-12 SWITCH MOUNTING KITS 6790 & JC1SDx JC1STx SOLID Solid REED STATE State 27 & Each kit cludes 1 target, 2 switch mountg brackets (1 for JC1STx ), and fasteners for mountg. Switches sold separately. (800) CAD & Sizg Assistance Use PHD's free onle Product Sizg and CAD Configurator at
3 ENGINEERING DATA: SERIES GRIPPERS SPECIFICATIONS OPERATING PRESSURE STANDARD UNIT SPRING ASSIST UNIT OPERATING TEMPERATURE RATED LIFE GRIP REPEATABILITY CYCLE TIME LUBRICATION MAINTENANCE SERIES 30 psi m to 100 psi max [2 bar m to 7 bar max] air psi m to 100 psi max [3.5 bar m to 7 bar max] air -20 F to +180 F [-28 C to +82 C] 6 million cycles mimum (cludg sprg assist units) With [ ] of origal position See table below Factory lubricated for rated life Field repairable MINIMUM TOTAL JAW TRAVEL TOTAL CLOSE GRIP FORCE AT 87 psi [6 bar] N GRIPPER WEIGHT kg CLOSE OR OPEN TIME 87 psi [6 bar] sec DISPLACEMENT 3 cm EXTERNAL GRIP IMPERIAL GRIP FORCE FACTOR GF METRIC INTERNAL GRIP IMPERIAL METRIC x x 7 28 x 6 28 x 10 x 8 x 13 x 19 x 28 x x 44 SPRING ASSIST GRIP FORCE SF (SPRING ONLY)* SPRING CLOSE GRIP FORCE SF (SPRING ONLY)* SPRING OPEN GRIP FORCE MINIMUM MAXIMUM MINIMUM MAXIMUM N N N N SPRING ASSIST GRIPPER WEIGHT kg SPRING ASSIST CLOSE OR OPEN TIME 87 psi [6 bar] IN sec WITH SPRING AGAINST SPRING SPRING ONLY *Sprg grip force (SF) varies with sprg compression. The mimum sprg grip force values occur with the sprg at least compression (jaws fully closed on sprg close units and fully open on sprg open units). The maximum sprg grip force values occur with the sprg at most compression (jaws fully open on sprg close units and fully closed on sprg open units). Sizg & Application Assistance Use PHD's free onle Product Sizg Application or view the Product Sizg Catalog at: (800)
4 ENGINEERING DATA: SERIES GRIPPERS Jaw toolg should be designed so that the grip pot is as close to the cover surface as possible. As the grip pot is moved away from the cover surface, the applied moment causes jaw friction to crease, resultg reduced effective grip force. The Grip Force Factor (GF) values given the table on page 4-13 are for zero toolg length (cover surface) x x 7 At 100 psi [7 bar] At 87 psi [6 bar] MAXIMUM TOOLING LENGTHS [25] [] [75] TOOLING LENGTH [] At 60 psi [4 bar] or less x 6 28 x [25] [] [75] [100] TOOLING LENGTH [] At 100 psi [7 bar] At 87 psi [6 bar] MAXIMUM TOOLING LENGTHS At 60 psi [4 bar] or less x 8 x [25] [] [75] [100] TOOLING LENGTH [] At 100 psi [7 bar] At 87 psi [6 bar] MAXIMUM TOOLING LENGTHS At 60 psi [4 bar] or less x 19 & x 28 MAXIMUM TOOLING LENGTHS [25] [] [75] [100] [125] [1] At 100 psi [7 bar] At 87 psi [6 bar] At 60 psi [4 bar] or less x & x [25] [] [75] [100] [125] [1] [175] [200] [225] At 100 psi [7 bar] At 87 psi [6 bar] MAXIMUM TOOLING LENGTHS At 60 psi [4 bar] or less TOOLING LENGTH [] TOOLING LENGTH [] GRIP force CALCULATION Equations: IMPERIAL: TOTAL GRIP FORCE [] = (Pressure [psi] x GF ) x Toolg Length Factor TOTAL GRIP FORCE WITH SPRINGS [] = ((Pressure [psi] x GF ) ± SF []) x Toolg Length Factor METRIC: TOTAL GRIP FORCE [N] = (Pressure [bar] x GF) x Toolg Length Factor TOTAL GRIP FORCE WITH SPRINGS [N] = ((Pressure [bar] x GF ) ± SF [N]) x Toolg Length Factor COVER SURFACE Toolg Length F/2 PART F/2 F = Total Grip Force (800)
5 ENSIONS: SERIES GRIPPERS 3 2X MANUFACTURING HOLES (CONSULT PHD FOR MORE INFORMATION) K3 4 K2 B1 2 2X K [H7] DOWEL PIN HOLE 1) **ENSIONS FOR THESE FEATURES CHANGE FOR SPRING ASSIST UNITS, SEE SPRING ASSIST ENSIONS ON OPTION PAGES FOR INFORMATION. 2) DESIGNATED IS CENTERLINE OF UNIT 3) METRIC INFORMATION SHOWN IN [ ] OR SHOWN IN COLUMNS DESIGNATED 4) CIRCLED NUMBERS INDICATE POSITIONS 5) *A OPEN REFLECTS THE SMALLEST POSSIBLE OPEN ENSION A CLOSED REFLECTS THE LARGEST POSSIBLE CLOSED ENSION 6) CIRCLED NUMBERS INDICATE POSITIONS 2X P1 PORT P3** P2** K5 B X K1 THD ( 27, 28, & ) 4X K1 THD ( ONLY) EXTRA THREADS SHOWN SHADED 27 & 28, & P4** P5** J8** J5** J8** J5** B3** B4** J7 J3 / 2 J3 J7 J3 6 A CLOSED* A OPEN*(SHORT TRAVEL) APPLIES TO: 27 x 4.5, 28 x 6, x 8, x 19, AND x A OPEN*(LONG TRAVEL) APPLIES TO: 27 x 7, 28 x 10, x 13, x 28, AND x 44 2X J [H7] DOWEL PIN HOLE J4 J6 2X J1 THD 2X J [H7] DOWEL PIN HOLE J4 J6 CAD & Sizg Assistance Use PHD's free onle Product Sizg and CAD Configurator at 4X J1 THD SHORT TRAVEL (MIN TRAVEL PER JAW) LONG TRAVEL (MIN TRAVEL PER JAW) A CLOSED* A OPEN SHORT* A OPEN LONG* B1 B2 B3** B4** J1 J2 J3 J4 J5** J6 J7 J8** K1 K2 K3 K4 K5 P1 P2** P3** P4** P5** x DP.0658 x.197 DP x.375 DP x.2 DP M4 x 0.7 x DP 2.0 x 5.0 DP x 9.5 DP x DP x.315 DP.1283 x.197 DP /4-20 x.512 DP x.256 DP x 8 DP 3.0 x 5.0 DP M6 x x 13.0 DP x 6.5 DP x.394 DP.1595 x DP /16-18 x DP x.256 DP (800) x 10.0 DP 4.0 x DP M8 x 1.25 x DP x 6.5 DP /4-28 x.512 DP.1908 x.394 DP /8-16 x.768 DP x.512 DP /8 NPT M6 x x 13.0 DP 5.0 x 10.0 DP M10 x 1.5 x 19.5 DP x 13.0 DP /8 BSPP /8-24 x.768 DP.3158 x.512 DP /2-13 x 24 DP x.512 DP /8 NPT M10 x 1.5 x 19.5 DP 8.0 x 13.0 DP M12 x 1.75 x 2 DP x 13 DP /8 BSPP
6 OPTIONS: SERIES GRIPPERS FSR2 FSE2 MEDIUM FORCE SPRING ASSIST CLOSE MEDIUM FORCE SPRING ASSIST OPEN GR3 BOTTOM MOUNTING FLANGE This option provides mountg threads and dowel holes on the side opposite the standard ports. Sprgs can mata sprg grip force if air pressure is lost or crease grip force one specific direction when used with air pressure. Sprg assist units are engeered and tested for a mimum of 6 million cycles under normal operatg conditions. Workg air pressure for sprg assist units is psi m psi max [3.5 bar m - 7 bar max]. For sprg grip forces, see table on page GR3 MOUNTING, INCLUDES 2 FEMALE THREADS AND 2 DOWEL PIN HOLES UB48 PORT OPTION IN LOCATION 48 This option provides ports location 48. The standard ports are plugged. CU SWITCH READY With this option the gripper cludes a target p attached to the jaw for use with ductive proximity switches as well as the Series 6790 and JC1 switches. Switches and switch mountg kits are required addition to the CU option and are sold separately. See Accessories pages for switches and mountg kits. PORT OPTION UB48 L11-UB99 L11-UB37 MANIFOLD PORTS With these options the gripper is configured for manifold mountg on either the standard or optional mountg face, accordg to the selected option code. The standard ports are plugged. O-rg seals are provided for mountg between the gripper and the manifold. When the L11-UB37 option is specified, the GR3 option is automatically cluded to provide mountgs on the manifold surface. See onle pages for GR3 mountg formation.! Options may affect unit length. See dimensional pages and option formation details. Refer to this product s onle catalog the product section for complete formation cludg related dimensions and additional specifications. See lk at bottom of this page. MANIFOLD OPTION L11-UB99 MANIFOLD OPTION L11-UB37 INCLUDES MOUNTING OPTION GR3 (SEE GR3 OPTION FOR ENSIONS) REPLACEMENT MANIFOLD SEAL KITS KIT NUMBER 27 & Manifold kit cludes O-rgs (800)
7 OPTIONS: SERIES GRIPPERS FSR2 FSE2 MEDIUM FORCE SPRING ASSIST CLOSE MEDIUM FORCE SPRING ASSIST OPEN Sprgs can mata sprg grip force if air pressure is lost or crease grip force one specific direction when used with air pressure. Sprg assist units are engeered and tested for a mimum of 6 million cycles under normal operatg conditions. Workg air pressure for sprg assist units is psi m psi max [3.5 bar m - 7 bar max]. For sprg grip forces, see table on page B6 J9 J10 B7 3 B5 B6 B7 J9 J10 P21 P22 P23 P24 P X P21 PORT ) DESIGNATED IS CENTERLINE OF UNIT 1 P23 P P24 P /8 NPT /8 BSPP B5 (SPRING ASSIST ADDER) /8 NPT /8 BSPP UB48 PORT OPTION IN LOCATION 48 This option provides ports location 48. The standard ports are plugged. P21* P22* P17 P19 P18 P20 OPTIONAL SPRING ASSIST X P16 PORT PORT OPTION UB48 P16 P17 P18 P19 P20 P21* P22* (A CLOSED) M SEE NOTE 4 M M (A CLOSED) M /8 NPT /8 BSPP ) DESIGNATED IS CENTERLINE OF UNIT 2) CIRCLED NUMBERS INDICATE POSITIONS 3) * APPLIES TO SPRING ASSIST UNITS ONLY 4).098 [2.5 ] PORT PLUG HEAD FOR & METRIC UNITS ONLY. FOR ALL OTHER S, PORT PLUG HEAD MAY PROTRUDE TO.040 [1 ] (800)
8 OPTIONS: SERIES GRIPPERS L11-UB99 L11-UB37 MANIFOLD PORTS With these options the gripper is configured for manifold mountg on either the standard or optional mountg face, accordg to the selected option code. The standard ports are plugged. O-rg seals are provided for mountg between the gripper and the manifold. When the L11-UB37 option is specified, the GR3 option is automatically cluded to provide mountgs on the manifold surface. See page 4-30 for GR3 mountg formation. MANIFOLD OPTION L11-UB99 JAWS SHOWN IN CLOSED POSITION OPTION L11-UB37 2X MANIFOLD Ø P24* P23* P7 OPEN P6 3 P14 P13 CLOSE OPEN CUSTOMER SUPPLIED MANIFOLD Ø P10 O-RING Ø P11 MANIFOLD OPTION L11-UB37 INCLUDES MOUNTING OPTION GR3 (SEE GR3 OPTION FOR ENSIONS) P12 MANIFOLD PORTING ENSIONS FOR CUSTOMER USE (ENSIONS REQUIRED FOR CUSTOMER MOUNTING SURFACE) GRIPPER O-RING I.D. O-RING CROSS-SECTION T REPLACEMENT MANIFOLD SEAL KITS KIT NUMBER 27 & Manifold kit cludes O-rgs. 4 P9 OPTION L11-UB99 2X MANIFOLD Ø SEE NOTE 5 P8 CLOSE 1 (A CLOSED) 2 SEE NOTE 5 P6 P7 P8 P9 P10 P10 O-RING (I.D. x T) P11 P12 P13 P14 P23* P24* x x x x x 1.5 m ) DESIGNATED CL IS CENTERLINE OF UNIT 2) ENSIONS TO MANIFOLD HOLES ARE FOR LOCATION OF O-RING COUNTERBORES. MANIFOLD HOLES MAY DIFFER SLIGHTLY 3) * APPLIES TO SPRING ASSIST UNITS ONLY 4) CIRCLED NUMBERS INDICATE POSITIONS 5).098 [2.5 ] PORT PLUG HEAD FOR & METRIC UNITS ONLY. FOR ALL OTHER S, PORT PLUG HEAD MAY PROTRUDE UP TO.040 [1 ] (800)
9 OPTIONS: SERIES GRIPPERS GR3 MOUNTING OPTION IN LOCATION 37 This option provides mountg threads and dowel holes on the side opposite the standard ports. K11 K7 2X K [H7] DOWEL PIN HOLE K10 K8 K12* 2X K9 THD GR3 MOUNTING, INCLUDES 2 FEMALE THREADS AND 2 DOWEL PIN HOLES 3 OPTIONAL SPRING ASSIST (A CLOSED) K6 K7 K8 K9 K10 K11 K12* (A CLOSED).1283 x DP x.315 DP x DP x DP /4-20 x 8.0 DP x.512 DP x DP M6 x x 13.0 DP x.197 DP /16-18 x DP x 5.0 DP M8 x 1.25 x DP ) DESIGNATED CL IS CENTERLINE OF UNIT 2) METRIC INFORMATION SHOWN IN [ ] OR IN COLUMNS DESIGNATED 3) CIRCLED NUMBERS INDICATE POSITIONS 4) *APPLIES TO SPRING ASSIST UNITS ONLY.3158 x.315 DP /8-16 x.0 DP x 8.0 DP M10 x 1.5 x 1 DP x.394 DP /2-13 x 24 DP x 10.0 DP M12 x 1.75 x 2 DP CU SWITCH READY With this option the gripper cludes a target p attached to the jaw for use with ductive proximity switches as well as the Series 6790 and JC1 switches. Switches and switch mountg kits are required addition to the CU option and are sold separately. See Accessories pages for switches and mountg kits. (800)
10 ACCESSORIES: SERIES GRIPPERS PROXIMITY SWITCHES (-CU OPTION REQUIRED) See Switches and Sensors section for complete switch specifications. 4 ROUND INDUCTIVE PROXIMITY SWITCHES ( 27, 28, & ) PART NUMBER DESCRIPTION NPN (Sk) 2 meter cable PNP (Source) 2 meter cable 8 THREADED INDUCTIVE PROXIMITY SWITCHES ( & ) PART NUMBER DESCRIPTION NPN (Sk) 2 meter cable PNP (Source) 2 meter cable PROXIMITY SWITCH MOUNTING KITS KIT NUMBER 27 & Each kit cludes 1 target, 2 switch mountg brackets, and fasteners for mountg. Switches sold separately. 27, 28, & & JAWS SHOWN IN CLOSED POSITION PS12** PS6 PS7* (S 27, 28 & ) PS7* (S & ) PS8 OPTIONAL SPRING ASSIST APPROXIMATE LED LOCATION (4 ONLY) * PS2 MAX SENSING DISTANCE PS1 PS10 HEX (PROX CLAMP, 4 ONLY) PS4 PS9 HEX (BRACKET ADJUSTMENT) PS11 HEX PS5 PS3 PS1 PS2 PS3 PS4 PS5 PS6 PS7* PS8 PS9 PS10 PS11 PS12** ** * 27 4 ROUND ROUND ROUND THREADED THREADED ) * INDICATES BOTTOM OF PROXIMITY SWITCH BARREL, DOES NOT INCLUDE CABLE. ENSIONS DO NOT APPLY TO SPRING ASSIST UNIT BECAUSE PROXIMITY SWITCH BARREL DOES NOT PROTRUDE ON SPRING ASSIST UNITS 2) ** APPLIES TO SPRING ASSIST UNITS ONLY (800)
11 ACCESSORIES: SERIES GRIPPERS Series 6790 & JC1 SWITCHES (-CU OPTION REQUIRED) SERIES 6790 & JC1 SWITCHES PNP (Source) or NPN (Sk) Reed, VDC, 5 m cable JC1SDN-5 NPN (Sk) Solid State, VDC, 5 m cable JC1SDP-5 PNP (Source) Solid State, VDC, 5 m cable PNP (Source) or NPN (Sk) Reed, VDC, JC1SDN-K NPN (Sk) Solid State, VDC, JC1SDP-K PNP (Source) Solid State, VDC, PNP (Source) or NPN (Sk) Reed, VAC, SERIES 6790 & JC1SDx CORDSET CHART M8, 3 p, Straight Female Connector, 2 m cable M8, 3 p, Straight Female Connector, 5 m cable 1) JC1 Switches are rotated 90. LED faces side of switch bracket. 2) See switches & sensors Section for additional switch formation and complete specification. SERIES JC1STP 2 POSITION SWITCHES JC1STP-2 PNP (Source) Solid State, VDC, 2 m cable JC1STP-K NPN (Sk) Solid State, VDC, SERIES JC1STP CORDSET CHART M8, 4 p, Straight Female Connector, 5 m cable SWITCH MOUNTING KITS 6790 & JC1SDx JC1STx SOLID Solid REED STATE State 27 & Each kit cludes 1 target, 2 switch mountg brackets (1 for JC1STx ), and fasteners for mountg. Switches sold separately. JAWS SHOWN IN CLOSED POSITION HS2* ( & ) HS2* ( 27, 28 & ) HS3 OPTIONAL SPRING ASSIST * HS9** SERIES 6790 & JC1 SWITCH HS4 HS7 HEX HS6 SWITCH MOUNTING SCREW ORIENT TARGET AS SHOWN APPROXIMATE LED LOCATION (SEE NOTE 2) HS5 HS2* HS3 HS4 HS5 HS6 HS7 HEX HS9** * ) *ENSION APPLIES TO INDICATED END OF SWITCH BRACKET (NOT CABLE) 2) JC1 SWITCHES ARE ROTATED 90. LED FACES SIDE OF SWITCH BRACKET 3) SEE SWITCHES AND SENSORS SECTION FOR ADDITIONAL SWITCH INFORMATION AND COMPLETE SPECIFICATION. 4) ** APPLIES TO SPRING ASSIST UNITS ONLY (800)
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER
PARALLEL PNEUMATIC HEAVY DUTY GRIPPER Major Benefits Compact, low profile design provides high grip force and large moment capacities with low overall weight. Ultra-rigid, wear-compensatg jaw guide system
More informationPARALLEL PNEUMATIC 3-JAW GRIPPER
PARALLEL PNEUMATIC 3-JAW GRIPPER Major Benefits 3 jaw design provides self-centerg and maximum contact between part and jaw toolg Low profile to grip force and jaw travel ratios Eight sizes available both
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationSERIES GRK PARALLEL GRIPPERS
GRK SERIES GRK PARALLEL GRIPPERS Ideal for Assembly and Robotics Highest Grip Force Its Class Precision Jaw Movement High Moments Highest Grip Force to Height Ratio Precision Jaw Movement Wear Compensatg
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationGRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION
GRIPPERS AIR OR HYDRAULIC ANGULAR OR PARALLEL MOTION A Wide Range of Sizes, Jaw Styles, Jaw Travels, and Grippg Forces for Most Any Grippg Requirement INDEX: Parallel Jaw Motion Pages -1 to -19 18 Angular
More informationSERIES GRS GRIPPERS INFORMATION SHEET
Ordering Data SERIES GRS GRIPPERS IFORMATIO SHEET IMPORTAT IFORMATIO DO OT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationINFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES
INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationrotary parallel pneumatic gripper
rotary parallel pneumatic gripper Major Benefits High grip force to weight ratio Two body and jaw styles with a total of four sizes available both imperial and metric versions Sprg assist on open or close
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationParallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
More informationHEAVY LIFTERS FOR MATERIAL HANDLING
HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars
More informationSERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO.
Ordering Data SERIES SFP SLIDES INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationgrippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationRUA-112M. Description. Spring. Blank None. Spring Closed Spring Open RE RI Inductive Case Description
RUA Series Angular Grippers Features and Benefits How To Order Features: Robust, shielded, high force gripper Optional springs for part retention in case of air loss or increased grip-force Side or top
More informationARM OVER CLAMP FOR ASSEMBLY AND WELDING
ARM OVER CLAMP FOR ASSEMBLY AND WELDING Superior part holding Provides widest range of high clamping force in its class OPTIONS: AD001 AU001 AL001 AR000 SW42 PS1E1 Patent Pending ORDERING DATA: SERIES
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationRotary Actuators DRG. See Page3.2 DRF. See. Page3.8 DRM
Rotary Actuators RR-18/28 Light Duty Rack and Pinion Rotary Actuator Series Designed for small or lightweight Low profile and bearing supported turn table provides an extremely compact package for tight
More informationWBG Series Wide Body Grippers
WBG Series Wide Body Grippers www.numatics.com Table of Contents WBG Series Parallel Grippers Features and Benefits 3 How To Order 3 WBGS 60 Dimensions & Technical 4 WBGS 90 Dimensions & Technical 5 WBGL
More informationRA (cam driven) Series
RA (cam driven) Series Angular Grippers Features and Benefits How o Order Features: Highly reliable rugged general purpose gripper High grip force to size ratio due to cam driven design Fingers can be
More informationPNEUMATIC ROTARY ACTUATORS
Bulletin FRA.C-09 Prices effective September 1, 2011 PNEUMATIC ROTARY ACTUATORS FRA & FRC Series FRA Series Features 1. Magnetic pistons are standard on all models. 2. Compact design saves space. 3. Rectangular
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationAngular Motion Gripper Product Overview
2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular
More informationSERIES PNC CLAMP. Automated Stamping for Part Identification HEAVY DUTY MODEL PATENT #6,125,684 PNC05. Switch Mounting Options.
SERIES PNC CLAMP Automated Stampg for Part Identification HEAVY DUTY MODEL Tandem Cylder Switch Mountg Options Weldg Slag Shields PATENT #,5,8 Copyright 00, by PHD Inc. All Rights Reserved. Prted the U.S.A.
More informationPSP SERIES PSP SHOT PIN. Superior part locating and positioning. Provides the best repeatability in its class. Patent Pending PSP01A
PSP SERIES PSP SHOT PIN Superior part locating and positioning. Provides the best repeatability in its class. Port Fittings Option Switch Options Weld Cover Option Patent Pending ORDERING DATA: SERIES
More informationGC-45. Description. Seals. Viton High Temperature
DG/G Series 2-Jaw Precision Parallel Grippers Features and Benefits How o Order Features: Rugged, high precision long stroke gripper High impact resistant with double wedge design Versatile mounting on
More informationInstallation, Operation and Maintenance Manual. for the MOGAS Pneumatic Actuator
Installation, Operation and Matenance Manual for the MOGAS Pneumatic Actuator Parts and Materials 18 21 20 22 23 24 25 19 1 2 3 4 5 6 26 27 19 7 8 9 15 16 17 22 20 21 18 14 10 25 24 11 12 13 2 Parts and
More informationRPL Series. Hard Coat Anodize The body has hard-coat anodize 60 RC with PTFE impregnation. One Piece Body One piece lightweight aluminum body
Parallel PNEUAI GRIPPERS PREISION OW PROFIE SERIES ONG FINGER APPIAIONS RP Series D-8-E--44 visit OEGA Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
More informationSeamless Integration of PHD Grippers to Universal Robots
Seamless Integration of PH Grippers to Universal Robots PNEUON02 ENEFITS n Provides seamless, cost-effective, pneumatic end-effector integration for collaborative robots n Incorporated M valves n ouples
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationAngular Grippers- 180 Series
D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:
More informationHelical Hydraulic Rotary Actuators. we carry the load.
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
More informationWG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
More information2-Jaw General Industrial Parallel Grippers Features and Benefits How To Order. Size Stroke - - -
RP Series 2-Jaw General Industrial Parallel Grippers Features and Benefits How o Order Features: Widely used robust sealed design gripper Double wedge design for high impact applications Hardened steel
More informationAngular and Parallel Grippers
CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...
More informationDouble Acting Spring Assist
1.144 RPS Spring Assist 2-Jaw Parallel Grippers Patented double wedge design: his gripper utilizes our patented double wedge design for actuation and synchronization. Fail safe operation: he force supplied
More informationAngular Grippers 2.1 ANGULAR GRIPPERS
ngular Grippers NGULR GRIPPERS 2.1 ngular Motion Gripper Product Overview NGULR GRIPPERS 2.2 RU Series ngular Gripper 2-Jaw ngular Gripper Spring ssist Pneumatic or Hydraulic Operation Preferred Market:
More informationGRM SERIES GRM CLAMPS R JAW STYLE. Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps GRMR01
GRM SERIES GRM CLAMPS R STYLE Compact Jaw Profi le for Limited Space Applications Largest Total Clamp Force of All Series GRM2 Clamps ORDERING DATA: SERIES GRM CLAMP STYLE R INDEX: Ordering Data Page 2
More informationSize 50P 100P 25P 35P 40P 43P. Description. Seals. Viton High Temperature - - Description. Metric. Metric
RP-P Series 2-Jaw Precision Parallel Grippers Features and Benefits How o Order Features: Precision gripper with excellent part position repeatability Rack and pinion design for precise jaw synchronization
More informationSERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET
SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationSeries OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
More informationPARALLEL PNEUMATIC GRIPPERS
PARAE PNEUAI GRIPPERS PREISION OW PROFIE SERIES RP Series Precision Gripping Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning lass 1 lean Room Rated with orrosion
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationCOMPACT CYLINDER CYLINDER FORCE AND WEIGHT TABLE BASE WEIGHT EFFECTIVE AREA
CRS COMPACT CYLINDER STROKE TOLERANCE TEMPERATURE LIMITS VELOCITY LIFE EXPECTANCY SERIES CRS 1 psi min to 15 psi max at zero load [.7 bar min to 1 bar max] air.31 inch [.8 mm] -2 to +18 F [-28 to +82 C]
More informationSERIES BCS STRETCH ROD CYLINDERS
BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationBenefits and Selection Table
105 Benefits and Selection Table D-M-E s Internal Latch Lock Allows Precision Control of Mold Plate Latchg Operation D-M-E s unique ternally-mounted latch lock mechanism adapts a number of mold base sizes
More informationPNC NUMBER CRUNCHER Series PNC44 with non-spherical mounting bracket Series PNC55 with PS(R) option Series PNC66 PNC06
PNC NUMBER CRUNCHER Automated stamping for part identification Series PNC44 with non-spherical mounting bracket Series PNC55 with PS(R) option Series PNC06 PNC Automated stamping for part identification
More informationPLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS
PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS Ideal for part clamping in weld areas Disappearing Pin Weld Field Immune Switch PLK03 PLK/PLKD PIN LOCATING CLAMPS PATENT PENDING Major Benefits Completely
More informationElectric Slide Solutions
Electric Slide Solutions Series ESU Electric Belt-Driven Base Slides Superior belt profile for improved performance Travels up to 5500 mm Speeds up to 5000 mm/s Exceptional moment and load capability Your
More informationElectric Slide Solutions
Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits
More informationBest Price Best Design Best Delivery SERIES GRM. Workholding Clamps. Sizes 1, 2, & 4 GRM124B
Best Price Best Design Best Delivery SERIES GRM Workholding Clamps Sizes 1, 2, & 4 PHD Series GRM Clamps Workholding Clamps The Series GRM Clamp continues to be the industryleading pneumatic actuator of
More informationHelical Hydraulic Rotary Actuators
Helical Hydraulic Rotary Actuators we carry the load. POWERFUL High torque High bearg capacity DURABLE Movg parts enclosed Suitable for harsh environments Helac s novative Powered Hge Helical, Hydraulic
More informationModular Gripping Products. Modular Gripping Products Introduction
Modular Gripping Products Introduction GR84 Enclosed Modular Mini-Clamp Offers several different jaw and tip options. Can be flange or cylinder mounted. High clamping force and fast opening and closing
More informationRPW-500M-2 RPW-500M-1 RPW-375M-2 RPW-375M-1. No stroke option for size 250 & 750
RPW Series 2-Jaw Heavy-Duty Parallel Grippers Features and Benefits How o Order Features: Robust wide body gripper Grip force ranges from 222N thru 291N Strokes range from 19mm thru 114mm Rack and pinion
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More informationSizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationThrough Hole Parallel Gripper PPC Series
ourtesy of MA/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 8 hrough Hole Parallel Gripper PP Series hrough Hole Gripper: Designed for unique applications
More informationFDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationKRONES DIRECT REPLACEMENTS
PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
More informationIn addition to the SPEC products described in this catalog,
In addition to the SPEC products described this catalog, Associated Sprg Raymond a worldwide leader the design, manufacture and sale of sprgs also offers a full le of struts, hardware, tool & die components:
More informationParallel Grippers- Triple Wedge Centering Series
RP SERIES 1.1 Parallel Grippers- riple Wedge entering Series achine loading hree jaws make this gripper ideal for machine loading and unloading. Sealed design repels chips and other particulate from the
More informationParallel Grippers- Miniature Series
RPM SERIES 1.16 Parallel Grippers- Miniature Series Precision applications: Preloaded dual- V roller bearings eliminate side play for excellent part position repeatability. Miniature size: Compact design
More informationUnique CORROSION RESISTANT PLASTIC SLIDE UNIT FEATURES. Major Benefits. Industry Uses
Unique CORROSION RESISTANT PLASTIC SLIDE Model# ML305733 PLASTIC SLIDE PET GRIPPERS UNIT FEATURES Bore Size: Stroke: Body: Tool Plate: Guide Shafts: Retaining Rings: Fasteners: 2X 32 mm DIA 2.000 +.080/-.000
More informationRobotic End Effectors
Robotic End Effectors QC Robot Tool Changer Heady duty, spring loaded locking mechanism prevents separation in the event of loss of air pressure Support for optional pneumatic, fluid or electrical interface
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More information324E L. Hydraulic Excavator
324E L Hydraulic Excavator Enge Drive Enge Model Cat C7.1 ACERT Maximum Travel Speed 5.3 km/h 3.3 mph Net Power ISO 14396 (metric) 151 kw 205 hp Maximum Drawbar Pull 227 kn 51,032 f Net Power ISO 14396
More informationFKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot
Catalog No. KHS- KHS Series Jaw Parallel Motion Pneumatic Grippers Mounting Hole Can be mounted from the gripper side Mounting slot for easy sensor installation Sensor Capable Bottom tapped holes Can be
More informationTuffCam Swing Clamps C-1. Frequently Asked Questions
Frequently Asked Questions C-1 When do you recommend the use of TuffCam Swing Clamps over the standard product? Applications where speed is essential, massive arms are required, or position sensing is
More informationSINGLE ROD Pneumatic. Major Benefits
SINGL ROD Pneumatic SPMNT Major enefits Ideal for shot pin applications Shock pad options reduce noise and minimize end of stroke shock Imperial or metric versions available Simple construction for easy
More informationIdeal for part clamping in weld areas
PIN LOCATING CLAMPS FOR THE AUTOMOBILE INDUSTRY Series PLK Ideal for part clamping in weld areas Completely enclosed finger/pin prevents weld slag from entering Locking mechanism holds panel in place if
More informationVERTICAL THRUSTER PNEUMATIC SLIDE
ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series
More informationSERIES1 NOZZLE CYLINDER REPAIR PROCEDURES
THE FOLLOWING REPAIR PROCEDURE ENCOMPASSES THESE PHD ML UNITS : - ML309435, ML310142, ML310153, ML310254, ML310295, ML310427, 1) Refer to individual ML exploded view for actual part numbers. 2) Not all
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationSeries OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
More information300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
More informationSTRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines
PACKAGING COMPONENTS PLASTIC GROUP BCK STRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines Quality Delivery Support SOLUTIONS A division of PHD Simplified Pneumatic System Easy Maintenance Better
More informationCopyright 2017, by PHD, Inc. All Rights Reserved. Printed in the U.S.A.
The Right Gripper for Your Part GRIPPER SELECTION GUIDE - Robotic end effector solutions - Angular and parallel, many sizes and options available - For handling various sized parts - Superior design and
More informationgrme SERIES GRME ELECTRIC CLAMP Electric Clamp with Greater Flexibility & Durability for the Automotive Industry GRME01A
grme SERIES GRME ELECTRIC CLAMP for the Automotive Industry Electric Clamp with Greater Flexibility & Durability GRME1A ORDERING DATA: SERIES GRME ELECTRIC CLAMPS INDEX: Ordering Data Pages 2 and 3 Benefits
More information1Mounting and positioning - mounting possible from several sides for versatile positioning. 2Permanent magnet - installed in the piston area
2-Jaw Parel Series GP8 pneumatic Product information: Sealed square guide Sealed with additional wiper High precision due to low play guide Optimum transfer of power to gripping force Positioning of the
More informationGripper Selection Guide
Gripper Selection Guide The Right Gripper for Your Part Robotic end effector solutions Angular & parallel, many sizes & options available For handling body panels & various sized parts Superior design
More informationP1Z Series. Magnetically Coupled Rodless Air Cylinders Contents
Magnetically Coupled Rodless Air Cylinders Contents Basic Version Features... 15 Ordering Information... 151 Specifications... 152 Technical Data... 153 Dimensions... 154 Mountings... 155 uided Version
More informationGrippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
More informationFeatures and Benefits
...........................................................3-14 Features and Benefits..............................................................................3 How To Order....................................................................................4
More information