|
|
- Mark Newton
- 5 years ago
- Views:
Transcription
1
2 TN-E series TN280E IH IH Injection Unit crew & barrel type A A B C crew diameter inch Injection pressure psi Theoretical injection volume inch Injection weight (P) oz crew stroke inch Injection speed inch/sec Injection rate inch /sec Plasticizing capacity (P) lbs/hr crew speed rpm Clamping Unit Clamping force U ton 280 Distance between tie-bar (H x V) inch 26.8 x 2.1 Platen dimension (H x V) inch 8.19 x 6.22 Clamping stroke inch 2.62 Daylight inch 9.21 Min. thickness of molds inch Max. thickness of molds inch 2.9 Ejector force U ton.96 Ejector stroke inch.91 Generals Total heat capacity kw 8..9 Electric motor power capacity kw Total electric power capacity kw Machine weight lbs Machine dimension (L x W x H) ft 2.16 x 6.2 x Theoretical Injection Volume: crew Cross ection crew troke 2. Min. Mold Dimension should be over 60% of Tie Bar Distance.. Coolant consumed for molds are not counted in coolant consumption amount.. pecifications are subject to change without notice for quality upgrade.
3 TN20E All Electric
4 ption Lists : standard : option : not applicable TN-E TN- TN-H TN-E TN- TN-H Injection Unit 1. Injection process control stage (peed/pressure) 2. Holding process control stage (peed/pressure). Charging process control stage (peed/pressure). Back pressure control stage. uck-back control (Before) 6. uck-back control (After) 7. Injection position display 8. Injection speed graphic display 9. Injection pressure graphic display. Closed-loop of injection 11. Closed-loop of back pressure 12. Cushion amount display & alarm 1. crew RPM display 1. Auto purge circuit 1. Alarm of over the charging 16. crew cold start prevention device 17. Heater pre-heating timer (for Weekly) 18. Heater temperature abnormal display & alarm 19. PID heater temperature control 20. Cylinder temperature keeping mode 21. hut-off nozzle (Hydraulic type) 22. Injection valve gate 220V 1 stage 2. Charging on fly 2. Anti-wear screw & barrel (HB00) 2. Anti-wear & anticorrosion screw & barrel (HB00) 26. Double barrier mixing screw (B crew) 27. High plastication mixing screw & barrel L/D (2) Clamping Unit 1. Mold closed speed control stage 2. Mold open speed control stage. Ejector speed control stage. Closed-loop of mold opening & closing movement. Clamping position 6. Automatic mold height adjustment 7. Ejector position 8. Clamping force display 9. Hydraulic core puller at the moving parts (1 tage). Hydraulic core puller (2 tage) 11. Core moving during mold opening 12. Core moving during mold ejecting 1. Unscrewing device 1. Air blow off unit (Fixed 1, Moving 1) 1. Daylight extension (0mm) 16. Ejector forward/backward device 17. Ejector check valves 18. Hydraulic core check valves 19. Toggle pin, Joint pin CRN coating 20. Low friction LM guide Generals 1. Molding data memory capacity (Internal / External) 00/usb 00/usb 00/usb 2. Alarm history display & saving. Record of setting-value changing. tatistical function. I/ circuit display 6. Multi language display (Korean / English / Chinese) 7. Robot interlock circuit 8. Robot interlock interface (Euromap 12 / PI) 9. Hydraulic oil level alarm. Hydraulic oil temperature over alarm 11. Water sol valve for oil cooler 12. Reservation of molding times & alarm 1. Hydraulic oil temperature control device 1. Hopper throat temperature control device 1. Automativ lubrication device 16. Auto grease for clamping unit 17. Auto grease for Injection unit 18. hot data file saving 19. Molding data print & file saving V single concent (perating parts) 21. phase socket concent installation (1A x 2EA) 22. Walk plate 2. Heater insulation cover (ENERBAND) 2. Hydraulic hose nibble eco-friendly trivalence chroming plating 2. Hopper slide device (L/M) 26. Auto safety door open & close 27. Auto safety door (pen only) 28. Auto safety door smog acrylic 29. Hydraulic oil cleaner 0. Recycling device 1. Cooling hose (Declination hose) 2. Auto clamps (Quick die changer). Insulation plate for mold. Product knock-out confirmation device. Product good / bad check device 6. Product chute 7. Levelling pads 8. AVR (Automatic Voltage Regulator) 9. Boost the voltage transformer 0. Aliminium pattern iron sheet 1. LED lighting for worker 2. U resin receiver. Monitoring consumption of electrical power. tage alarm lamp. Maintenance tools 6. pare parts * This feature lists can be changed for improved development without prior notice.
5 Global Network Poland Mobile : India Mobile : Mobile : Malaysia Tel : pl@wjpim.com in@wjpim.com my@wjpim.com CHINA Corporation No 18, Moganshan Road, Beilun, Ningbo, China Tel : Fax : cn@wjpim.com Guangdong ffice Tel : Fax : uzhou ffice Tel : Fax : hangdong ffice Tel : Fax : Tianjin ffice Tel : Fax : Chongqing ffice Tel : Fax : U Corporation Philippines Tel : Indonesia Tel : Thailand Tel : ph@wjpim.com id@wjpim.com th@wjpim.com 68 Park Ridge Ave. Norco, CA Tel : Fax : us@wjpim.com MEIC Corporation Local #6 Ubicado en Ave. Miguel Aleman #80 en an Nicolas de los Garza, N.L. Mexico Tel : itel : mx@wjpim.com JAPAN Corporation Vietnam Tel : vn@wjpim.com 1F, Maison de ff, , Heian, Kita-Ku, Nagoya, , Japan Tel : Fax : jp@wjpim.com itel : Head office & Plant 6-17, Robotland-ro 29 beon-gil, eo-gu, Incheon, Korea Tel : Fax : info@wjpim.com Printed in Korea. ctober. 201
www.woojinplai.com pecification TN 20E IE IE Injection Unit crew & Barrel Type A A B crew Diameter 28 2 6 0 Injection Pressure kg/cm 2 626 00 2687 2172 1719 Mpa.6. 26. 21.0 168.6 Holding Pressure kg/cm
More informationToggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving
TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB Hydraulic TH Hydraulic TN Hydraulic & All electric TE All electric VH Vertical hydraulic
More informationToggle and Electric Type Injection Molding Machine. series. High Speed. High Precision. Energy Saving
TE Toggle and Electric Type Injection Molding Machine series High Speed High Precision Energy Saving Machine series TB series 90-880 TH-S(D&B) series -4 TH-PET(D&B) series 3 TH-SMC series 220-4 DL-S series
More informationEnergy Saving Hydraulic PLAIMM TB series
TB eries Energy aving Hydraulic PLAIMM TB series Back to the Basic 2 Woojin Plaimm TB serise 3 Energy aving Hydraulic PLAIMM TB series TB series is the newly launched energy saving hydraulic type injection
More informationDLseries. Compact Design. High Plasticizing Capacity. High Precision. Two Platen Direct Locking Type Injection Molding Machine
Two Platen Direct Locking Type Injection Molding Machine DLseries Compact Design High Plasticizing Capacity High Precision Machine series TB Hydraulic TH Hydraulic TN Hydraulic & ll electric TE ll electric
More informationVertical Type Injection Molding Machine. series. Insert Molding. Automation Optimization. Minimize the spaced required for installation
VH Vertical Type Injection Molding Machine series Insert Molding Automation Optimization Minimize the spaced required for installation Machine series TB series 90-880 TH-S(D&B) series 50-450 TH-PET(D&B)
More informationSpecifications / International kN
ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail: contact@zhafir.com www.zhafir.com Zhafir Zeres Series NINGBO ZHAFIR PLASTICS
More informationZhafir Venus Series. Specifications / International. Zhafir Venus. Series kN
Zhafir Venus Series Zhafir Venus Series Specifications / International 4-8000kN ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8-10 92263 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412- E-Mail:
More informationZhafir VenusⅡ/p Series
Zhafir VenusⅡ/p Series Zhafir Venus Series Packaging / International 10-3800kN ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee 8-10 963 Ebermannsdorf Germany Tel. +49-9438-9412-0 Fax. +49-9438-9412-1 E-Mail:
More informationSub title. PR series (Toggle type) Servo Hybrid system
Sub title PR series (Toggle type) Servo Hybrid system PR Series Feature Improved reproducibility and handling by excellent position sensor of mold close/open Outstanding injection molding for thin and
More information- Injection rate cm 3 /s Max. injection speed mm /s Max. injection pressure MPa Max. injection holding pressu MPa - -
1807731102 Other Screw diameter 68 75 83 83 90 100 100 110 Injection stroke 306 375 420 450 500 Theoretical injection capacity cm 3 1111 1656 2028 2272 2863 3534 3927 4752 Injection unit K600D L750D 2
More information30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements
440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2
More information45mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 35 Supply
330 S P E C I F I C A T I O N S 45mm English Metric Injection Unit Specifications A' A B A' A B Inj. Capacity, Max. GPPS oz 8 11 13 gm 226 312 368 Theoretical Disp in^3 15.3 19.4 24.0 cm^3 251 318 393
More information72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply
935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More informationEngel Injection Molding Machine VERTICAL CLAMP INSERT 330V/90 WP US. Data Sheet INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION
Engel Injection Molding Machine INSERT 330V/90 WP US - VERTICAL CLAMP / VERTICAL INJECTION CLAMP Clamp force US tons 90 Clamp opening force US tons 3.0 Clamp stroke (max.) inches 13.78 Mold height (min
More informationElectric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply
750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
More information80 ~ 350 Tons LGH-D Series
0 ~ 0 Tons LGH-D Series Featuring another technical innovation by LS The LGH-D Series, designed with LS s high technology, meets the demand for precision molding. Improved rigidity of the platen provides
More informationInjection Mould Machine
Injection Mould Machine PanAsia Exports (HK) Limited Room 1208-1209, B Block, Feng Xing Plaza, No. 242 Tian He Road, Tian He District, Guangzhou, 510620, China Tel: (8620) 28383510 Fax: (8620)28383516
More informationHaitian Jupiter JU/j Series
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD. Export Processing
More informationHaitian Saturn Series
PLASTICS MACHINERY Haitian Saturn Series HT 07001_GB Haitian International Co., Ltd Unit 1105 Metroplaza tower 2, 223 Hing Fong Road Kwai Fong N. T haitian@mail.haitian.com Haitian Partner: NINGBO HAITIAN
More informationMAGNA T SERVO. 500 to 5,500 kn
MAGNA T SERVO 500 to 5,500 kn A NEW STANDARD IN TOGGLE TECHNOLOGY Energy Efficient, Rugged & Reliable, Precise & Consistent, Versatile & User Friendly MAGNA T SERVO TOGGLE INJECTION MOLDING MACHINE Durable
More information4,500-33,000 kn. Zhafir Jenius Series. ZHAFIR PLASTICS MACHINERY Jubatus-Allee Ebermannsdorf Germany
ZHAFIR PLASTICS MACHINERY Jubatus-Allee 8 92263 Ebermannsdorf Germany contact@zhafir.com Zhafir Jenius Series Ningbo Zhafir Plastics Machinery Co.,Ltd Address: No.98, Guanhai Road, Chunxiao Town, Beilun
More informationTechnical Specifications
All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure
More informationHaitian Jupiter JU/j Series Specifications
Specifications HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO., LTD.
More information50-200Tons. Second Generation All-Electric injection molding machine. Victor Taichung - an established ISO-9001 & company
50-200Tons Second Generation All-Electric injection molding machine Victor Taichung - an established ISO-9001 & 01 company 50-200Tons Second Generation All-Electric injection molding machine New Centrally
More informationU.S.A. Specifications - Catalog #ECSX 3-15
TOSHIBA MACHINE U.S.A. Specifications - Catalog #ECSX 3-15 SPECIFICATIONS This may look like one machine......but it is so versatile, with a greater range of shot sizes, you ll think it was triplets. It
More informationHaitian JupiterⅡ Series
Haitian JupiterⅡ Series HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 level 11 Metroplaza Tower 3 Hing fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY
More informationHaitian Partner: HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower Hing Fong RD Kwai Fong N.T
HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20100805-EV NINGBO HAITIAN HUAYUAN
More informationThe ROBUST Performer
80 to 910 Ton The ROBUST Performer Energy Efficient Generous Specifications Robust & Reliable User Friendly Control The ROBUST Performer 3 Large Ram Diameter Provides Uniform Force Distribution across
More informationALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
More informationLS Hybrid Injection Molding Machine WIZ / X. 500 ~ 4500 USton Series.
W 2017-01 LS Hybrid Injection Molding Machine WIZ / X 500 ~ 4500 USton Series www.lsinjection.com Hybrid Injection Molding Machine Customer Focused Corporation The goal of LS injection molding machines
More informationALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
More informationALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
More informationBT SERIES www.borchenorthamerica.com TABLE OF CONTENTS BT SERIES ENERGY EFFICIENT. DURABLE. PRECISE. COST EFFECTIVE COMPANY BACKGROUND...5 CUSTOMER SERVICE...6 FEATURES...8 MAJOR HYDRAULIC/ELECTRIC COMPONENTS...9
More informationALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44
More informationElectric Servo Drive Injection Molding Machine
Electric Servo Drive Injection ing Machine Large Electric Servo Drive Injection ing Machines Promotes Faster Cycles, Energy Sa vings, and High Performance An industry pioneer, JSW has extensive experience
More informationECSXII. Smart Electric Molding Solutions. Reach for the impossible. Achieve the incredible. Watch the ECSXII video.
TOSHIBA MACHINE ECSXII Smart Electric Molding Solutions. www.toshiba-machine.com Watch the ECSXII video. u Reach for the impossible. Achieve the incredible. U.S.A. Specifications - Catalog #ECSXII 7-17
More information55, 90, 125, 140, 170, 225, 310, 400, 500 & 550 A NEW STANDARD IN TOGGLE TECHNOLOGY
55, 90, 125, 140, 170, 225, 310, 400, 500 & 550 A NEW STANDARD IN TOGGLE TECHNOLOGY Energy Efficient Rugged & Reliable recise & Consistent Versatile & User Friendly Compact Mono Toggle Design Durable Mono-Toggle
More informationPLASTICS INJECTION MOLDING MACHINE
PLASTICS INJECTION MOLDING MACHINE MODEL VT - 60 VT - 80 VT - VT - 140 VT - 200 UNIT A B C A B C A B C A B C Screw Diameter 30 30 27 35 35 32 45 45 40 50 50 45 55 Screw L / D Ratio 18:01 18:01 20:01 18:01
More informationR - Series Tons
R VictorTaichung R - Series -1300 Tons Hybrid High-Performance Medium tonnage plastic injection molding machine to satisfy your energy saving and repeatability requirement. Victor Taichung - an established
More informationHITECH HYDRAULICS. 70 Tons Tons 60 gm gm HYBRID SERVO INJECTION MOULDING MACHINE. SERIES CNC TURNED
HITECH HYDRAULICS www.hitechimm.com www.hitechgroup.org www.hitechhydraulics.com INJECTION MOULDING MACHINES COMPLETE HYDRAULIC SOLUTIONS CNC TURNED PRECISION P A R T S ik S D KINETIC SERVO DRIVE SINGLE
More informationSpritzgiessautomaten. Innovative into the future. Data and Equipment
Spritzgiessautomaten Innovative into the future Data and Equipment Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY
More informationECSXII. Smart All-Electric Molding Solutions. Reach for the impossible. Achieve the incredible. Watch the ECSXII video.
TOSHIBA MACHINE ECSXII Smart All-Electric Molding Solutions. www.toshiba-machine.com Watch the ECSXII video. u Reach for the impossible. Achieve the incredible. U.S.A. Specifications - Catalog #ECSXII
More informationMaquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons.
Maquinas Inyectoras Hibridas de 45Tons. a 6,000 Tons. Mechanical feature Clamping: Minimizing mold strain by flexible fixed platen and highly rigid clamping structure with ultra capability of self lock.
More informationZhafir Zeres Series ,500 kn
Zhafir Zeres Series 400-6,500 kn We extend electrical options ZHAFIR ZERES SERIES Zhafir has developed a new electric injection molding machine series, the Zhafir Zeres Series, a tremendously flexible
More informationMMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines
Mitsubishi Heavy Industries Technical Review Vol. 49 No. 4 (December 2012) 23 MMX Series High Accuracy, Energy Saving Large Hydraulic Injection Molding Machines Mitsubishi Heavy Industries Plastic Technology
More informationALLROUNDER 520 E. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
ALLROUNDER 520 E Distance between tie bars: 20.47 x 20.47 (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz MACHINE DIMENSIONS 520 E 78.74 53.15 33.46 4.72 12.99 15.75 51.18
More informationALLROUNDER 470 E. Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.
ALLROUNDER 470 E Distance between tie bars: 18.5 x 18.5 (470 x 470 mm) Clamping force: 110 tons Injection unit: 3.7 oz, 6.1 oz, 8.2 oz MACHINE DIMENSIONS 470 E 51.24 33.44 max.16.34 4.72 80.71 83.62 15.75
More informationFacts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
More informationALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
More informationLS Hybrid Injection Molding Machine WIZ / X. 450 ~ 4000 Ton Series.
W 2017-01 LS Hybrid Injection Molding Machine WIZ / X 450 ~ 4000 Ton Series www.lsinjection.com Hybrid Injection Molding Machine Customer Focused Corporation The goal of LS injection molding machines is
More informationALLROUNDER 570 A. Distance between tie bars: x (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.
ALLROUNDER 570 A Distance between tie bars: 22.44 x 22.44 (570 x 570 mm) Clamping force: 220 tons Injection unit: 8.2 oz, 15.3 oz, 29.8 oz MACHINE DIMENSIONS 570 A 78.82 55.43 33.46 330 17.24 88.39 1)
More informationLS ELECTRIC INJECTION MOLDING MACHINE WIZ-E. 18 ~ 850 Ton Series.
E 217-1 LS ELECTRIC INJECTION MOLDING MACHINE WIZ-E 18 ~ 85 Ton Series www.lsinjection.com Electric Injection Molding Machine Customer Focused Corporation The goal of LS injection molding machines is to
More informationID-HM Series Minimum Space Less Hydraulic Oil Precise Molding
ID-HM Series Minimum Space Less Hydraulic Oil Precise Molding ID-HM Series ID-HM Series (Hydro-Mechanical Type) Hydro-mechanical injection molding machines provide FLEXIILITY, HIGH PRODUCTIVITY, and LOW
More informationMedium Size Die Casting Machine
Medium Size Die Casting Machine UBE GLOBAL NETWORK With Japan as our headquarters, we contribute to our customers' globalization with a four-forked system covering Asia, North America and Europe. UBE Machinery
More informationTM Series t. Approved precision. Technology working for you.
TM Series 180 500 t Approved precision Technology working for you. Special features and benefits of the TM Series 180 500 t The TM Series with approved precision to business success The compact power packages
More informationALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400
Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330
More informationALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800
Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330
More informationALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
More informationALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
More informationBACK TO WEBSITE. SES and SE-HY Series
BACK TO WEBSITE SES and SE-HY Series S UMITOMO Mid-Size All-Electrics and Hybrids Recognized worldwide for electric injection molding machinery technology, Sumitomo sets the standard in precision, energy-efficient,
More informationHighsun. Create with most. professional high-speed plastic solution. Time to go global
Highsun Time to go global Create with most professional high-speed plastic solution LEADING ADVANTAGES 1 2 3 HIGHER-RIGIDITY & STRONGER MECHANICAL STRUCTURE HIGH-SPEED PERFORMANCE ADVANCED DESIGN & HIGHER
More informationALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
More informationALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
More informationALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
More informationALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
More information소형고속정밀사출성형기. High Speed & Precision Injection Molding Machine 첨단 설계로고정밀성형을실현한다 의첨단기술로탄생한 는형판의견고성을대폭증가시켜
사출종합 (0-0-) 최종 0 : PM 페이지 소형고속정밀사출성형기 G High Speed & Precision Injection Molding Machine 첨단 설계로고정밀성형을실현한다 의첨단기술로탄생한 는형판의견고성을대폭증가시켜 성형품의치수정도와안정성을높였으며 특히정 밀성형에놀라운위력을발휘합니다 FEA LS a The designed with LS s
More informationALLROUNDER 820 S Multi-component
Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component
More informationALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
More informationALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877
More informationALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
More informationFacts and figures INTEGRALPICKER V.
Facts and figures INTEGRALPICKER V www.arburg.com INTEGRALPICKER V Technical data Stroke, X-axis F Stroke, Y axis Clamping surface fixed mould platen A H K D C B 135 G P Ejection chute B-axis M N L 2 Technical
More informationFacts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850
More informationALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.
Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191
More informationALLROUNDER 275 V. Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz
ALLROUNDER 275 V Vertical free-space system Clamping force: 28 tons Injection unit: 1.4 oz, 2.3 oz MACHINE DIMENSIONS 275 V 35.43 2.18 70.1 113.39 1) 119.1 2) 111.81 1) 115.95 2).57 75.1 31.5 35.43 min.35.43
More informationALLROUNDER 720 S Multi-component
Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component
More informationALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
More information820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
More informationTH series Premium hydraulic injection molding machine
TH series Premium hydraulic injection molding machine Developed at WOOJIN PLAIMM's R&D center in Austria, TH series is designed to deliver the familiarity in design and performance of its European counterparts.
More informationThe multi-function machine
The multi-function machine Technical Description Multi Clamping unit asic hydraulic 500 kn 800 kn 1100 kn 18,5 kw 22 kw 30 kw Injection unit/ Distance Screw between tie bars V V V 370 x 370 120 200 22/25/30
More informationD1 Series Two-platen Injection Molding Machine
让中国装备技术与世界同步 WE WK ONGSIDE THE WORD Stock code: 300415 D1 Series Two-platen Injection Molding Machine ( 1T-2400T) Innovative Practice of arge-tonnage Two-platen Machine 广东伊之密精密机械股份有限公司 GUNGDONG YIZUMI
More informationZhafir Venus II Series. Zhafir Venus. Series
Zhafir Venus II Series Zhafir Venus Series An outstanding success story Zhafir Venus II SerieS During the last years of the introduction phase of the Venus Series, it has without question earned the respect
More informationHaitian MarsⅡSeries. Specifications / International KN. Haitian Mars. Series
Haitian MarsⅡSeries HITIN INTERNTIONL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HITIN HUYUN MCHINERY CO., LTD.
More informationSpecifications KN
Specifications 860-00 HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 20170419-IV
More informationMID TONNAGE. Van Dorn Caliber
MID TONNAGE Van Dorn Caliber V A N D O R N C A L I B E R THE POWER OF TWO Van Dorn and Demag Ergotech As a united force, Van Dorn and Demag Ergotech offer you, the customer, a number of advantages that
More informationFacts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.
Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)
More informationALLROUNDER 720 A Multi-component
Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component
More informationV-LINE creates the value of the next generation. Horizontal Injection Molding Machine Horizontal Injection Molding Machine vol.3. Create your future
Create your future Horizontal Injection Molding Machine Horizontal Injection Molding Machine vol.3 V-LINE creates the value of the next generation V-LINE is a registered trademark of Sodick Co., Ltd. V-LINE
More informationModularity with a highperformance
Ace is a precision, high quality injection moulding machine made by TOSHIBA MACHINE. Ace connotes to accomplish a task with complete success. Modularity with a highperformance profile: Ace GenXt 400 to
More informationALLROUNDER CUBE 2900
Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions
More informationSE-EV Advanced All-Electric Series
SE-EV Advanced All-Electric Series SE-EV Series Advanced All-Electrics Model sizes: 56, 84, 112, 146 and 202 U.S. tons New NC-10 control with Z-molding capabilities plus improved ease-of-use, processing
More informationPascal mag clamp.
Pascal mag clamp www.pascaleng.co.jp Pascal mag clamp 1 2 4,000 units in operation providing performance and reliability Mag clamp 3 4 5 6 Mag clamp & Mold die changer 7 Mag clamp & Multi coupler - open
More informationRS Series. For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items
www.rocheleautool.com RS Series Reciprocating Screw Blow Molding Machines For Volume Production of Thin Walled Containers, Industrial Containers, Wide Mouth Jars or Specialty Items RS-70 with Tail Puller
More informationMTC. Mold Temperature Control. Consilience Technology
We supply Take-out Robot, Factory Automation, Auxiliary Equipment, Auto Feeding system as an Integrated Engineering Solution provider. Consilience Technology MTC Mold Temperature Control 02 03 Company
More informationSE-DUZ Direct-Drive All-Electric Series
SE-DUZ Direct-Drive All-Electric Series SE-DUZ Series Direct-Drive All-Electrics Low-inertia, high-performance direct-drive motors for plasticizing, injection, clamping and ejection New PC-based control
More informationENGINE POWERED FORKLIFT TRUCKS. FG-F1 Series ton
ENGINE POWERED FORKLIFT TRUCKS FG-F1 Series 1.75-3.0 ton ENGINE POWERED FORKLIFT TRUCKS FG-F1 Series 1.75-3.0 ton Model Name FHGE18TF1 FGE25TF1 FGE25TF1S FHGE25TF1 FHGE30TF1 Capacity 1,750 kg 2,500 kg
More informationALLROUNDER 520 A. Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP): 400, 800.
A S GOLDEN EDITION V T K ALLROUNDER Technical data Tie bar distances: 520 x 520 mm Clamping forces: 1300, 1500 kn Injection units (according to EUROMAP):, 800 www.arburg.com Machine dimensions el. connection
More informationALLROUNDER 470 A multi-component
A S GOLDEN EDITION V T K ALLROUNDER 470 A multi-component Technical data Tie bar distances: 470 x 470 mm Clamping forces: 800, 1000 kn Injection units (according to EUROMAP): 70,, 400 www.arburg.com 470
More informationIntElect highly precise. Technical description
IntElect highly precise Technical description Technical Data IntElect 0/3 Sumitomo (SHI) Demag IntElect 0/3 Model description IntElect 0/3 IntElect 0/380 00 0080 International size description Clamping
More informationTechnical Data Injection Moulding Machines Series CX PET Light
130 CX PET Light Technical Data Injection Moulding Machines Series CX PET Light CX KM 130-750 CX (PET) 4-fold Injection Moulding machine metric units KM130CX Clamp unit Clamping force kn 1300 Mould opening
More information