HEAVY LIFTERS FOR MATERIAL HANDLING

Transcription

1 HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars

2 ORDERING DATA: SERIES PHL HEAVY LIFTER INDEX: Orderg Data Page 2 Benefits Page 3 Dimensions Pages 4 to 6 Engeerg Data Page 7 Options Pages 8 & 9 Exploded View Pages 10 Parts List, Repair Kits, & GM Specification Numbers Page 11 Application Example Page 12 MOUNTING PLATE OPTIONS & M004 - General Motors Global Die Standard, (GMGDS) = XXXX(X) = XXXX(X) (See Note 3) BLANK - Standard (M001) M002 - (Former) General Motors Global Die Standard, (GMGDS) B [M1542B] M004 - General Motors Global Die Standard, (GMGDS) XXXX(X) TO ORDER SPECIFY: Model, Unit Size, Design No., Stroke, and Additional Options if desired. See GM Specification Number Chart on page 11 SWITCH OPTIONS BLANK - None SW71-1 Reed switch stalled SW72-2 Reed switches stalled SW73-1 Hall Effect switch (PNP) stalled SW74-2 Hall Effect switches (PNP) stalled SW75-1 Hall Effect switch (NPN) stalled SW76-2 Hall Effect switches (NPN) stalled STROKE 50, 75, 80, 100, 125, 150, 160, 175, 200, 225, 250, 275, 300 (See Note 2) UNIT SIZE 4-40 Bore 6-63 Bore 8-80 Bore T M004 - SC01 - SW72 - PHL 6-5 x PF02 TOOL PLATE OPTIONS BLANK - Standard (T001) GM Global Die Standard (GMGDS) (A, B) T002 - GM Global Die Standard (GMGDS) = = = (T001 Tool Plate option available on only) (See Note 3) STOP COLLAR OPTIONS BLANK - None SC01 - Stop Collars and Shock Pads on Extend CYLINDER OPTIONS BLANK - None H1 - Lifter supplied without cylder H4 - Cylder replacement only PORT FITTING OPTIONS BLANK - None PF02 - For 3/8" tube PF04 - For 10 tube DESIGN NO. 5 - Metric MODEL PHL - Heavy Lifter OPTION COMPATIBILITY CHART OPTION T002 NO NO NO T001 NO NO NO SC01 H2 H1 SW7x PF02 PF01 LIFTER DESCRIPTION -5-M004-5-M001 (STD) -5-M002-5-M003-5-M004-5-M004 NOTES: 1) All units are standard with magnetic pistons. 2) 80 and 160 strokes are not available on units. 3) -M004-T002 options are mandatory for & units. 2 Copyright 2017, by PHD, Inc. All Rights Reserved. Prted the U.S.A.

3 SERIES PHL HEAVY LIFTER IDEAL FOR AUTOMATED, HIGH LOAD PART LIFTING APPLICATIONS proximity switches are available for sensg end of travel ISO cylder for easy replacement guideshafts chrome plated steel grease zerk on both bearg cartridges for ease of matenance and creased life optional stop collars and shock pads are adjustable for application flexibility and reduced noise and shock at end of travel sealed bearg cartridge long life, easy matenance built- rod compliance elimates side load on cylder piston rod, creasg life of unit alumum mountg plate rugged steel tool plate Major Benefits Simple design, compact size, long life, and the ability to handle high off-center loads Available as drop- replacement for General Motors Global Die Standards, (GMGDS) B, xxxx(x), xxxx(x), and xxxx(x) Available three bore sizes with many stroke lengths to fit your application requirements Built- rod compliance elimates side load on cylder piston rod thus creasg life Fully field repairable just 10 mutes, usg metric hex wrenches Composite beargs with ternal lubrication for long life Replaceable beargs elimate costly lifter replacement Industry Uses Material handlg Automotive Assembly mache builders 3

4 DIMENSIONS: SERIES - M001-T001 MOUNTING STYLE [330.0] [288.0] [214.0] [38.0] [70.0] [181.0] [87.0] [76.2] [50.0] 4X.504 THRU [12.8] 6X M12 x 1.75 LOCKING THD x.945 [24.0] DP MIN.394 [10.0] HEX MOUNTING SURFACE.315 HEX [8.0] [56.5] [75.0] [86.5] [150.0] 4X M8 x 1.25 THD x.630 [16.0] DP BOTH HEAD AND CAP OF CYLINDER NOTES: 1) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 2) ALL METRIC DIMENSIONS [ ] ARE GIVEN IN MILLIMETERS 1 = [213.5] CUSHION NEEDLE G 3/8 PORT [7.5].295 [87.0] [86.1] (RETRACTED).650 [16.5].950 [24.1] [103.5] + STROKE STROKE [121.0].630 [16.0] ACROSS FLATS [31.0].315 [8.0] HEX 4

5 DIMENSIONS: SERIES - M002-T001 MOUNTING STYLE [330.0] [287.6] [26.5] [70.0] [214.0] [181.0] [87.0] [76.2] [38.0].4761 THRU [12.09] 6X M12 x 1.75 LOCKING THD x.945 [24.0] DP MIN.394 [10.0] HEX MOUNTING SURFACE.315 HEX [8.0] [56.5] [75.0] [86.5] [150.0] 4X M8 x 1.25 THD x.630 [16.0] DP BOTH HEAD AND CAP OF CYLINDER [67.0] (RETRACTED) NOTES: 1) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 2) ALL METRIC DIMENSIONS [ ] ARE GIVEN IN MILLIMETERS 1 = [213.5] CUSHION NEEDLE G 3/8 PORT [7.5].295 [106.1] [18.5] [35.6] [122.6] + STROKE STROKE [140.1] [249.6].630 [16.0] ACROSS FLATS [31.0].315 [8.0] HEX.531 [13.5] WIDE SLOTS 5

6 DIMENSIONS: SERIES PHL - M004-T002 MOUNTING STYLE H1 HEX C1 B3 S1 C2 B2 MP11 P3 4X C5 THREAD BOTH HEAD AND CAP OF CYLINDER MOUNTING SURFACE B1 P4 PORT CUSHION NEEDLE P2 + STROKE P1 C3 + STROKE (CYLINDER) MOUNTING PLATE TOOL PLATE C4 ACROSS CYL FLATS TP5 MP12 MP13 MP4 THRU H1 HEX MP5 THREAD (MOUNTING PLATE) MP6 THRU TOOL PLATE H2 HEX MP3 TP4 MP9 MP2 TP1 MP10 MP7 THREAD (MOUNTING PLATE) MP8 THRU TOOL PLATE 4X TP3 THREAD TP2 MP1 H3 HEX NOTES: 1) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 2) ALL METRIC DIMENSIONS [ ] ARE GIVEN IN MILLIMETERS 1 = LETTER DIM B1 B2 B3 C1 C2 C3 C4 C5 H1 H2 H3 MP1 MP2 MP3 MP4 MP5 MP6 MP7 MP8 MP9 MP10 MP11 MP12 MP13 P1 P2 P3 P4 S1 TP1 TP2 TP3 TP4 TP MODEL NUMBER M6 x 1 M8 x 1.25 M10 x 1.5 x.630 [16.0] DP x.630 [16.0] DP x.787 [20.0] DP M12 THREAD x [] DP MIN M16 THREAD x.945 [24.0] DP MIN G 1/4 G 3/8 G 3/ M12 THREAD x.945 [24.0] DP MIN

7 ENGINEERING DATA: SERIES PHL HEAVY LIFTER SPECIFICATIONS OPERATING PRESSURE OPERATING TEMPERATURE LUBRICATION* SERIES PHL 20 psi m to 130 psi [1.4 bar m to 9.0 bar max] 23 to + 158F [-5 to + 70C] Factory lubricated for life *Periodic lubrication of bearg cartridges, piston rod, and thrust washers decreases wear and extends life. STROKE () TYPICAL CYCLE TIME (sec) EXTEND / RETRACT MODEL LENGTH TOLERANCE * PHL 160* +3.8/ M004-T [10.6] [10.9] [10.9] [11.2] [11.4] [11.7] [11.8] [12.0] [12.3] [12.6] [12.8] [13.1] [13.4] NOTES: 1) *These stroke lengths are not available as a standard for units. 2) Cycle times are based on 3/8" air les, valve of cv 5.1, and visually acceptable cushions. UNIT WEIGHT lb [kg] MOUNTING/TOOL PLATE STYLE M001-T001 M002-T001 M004-T [11.6] 26.0 [11.8] 29.3 [13.3] 26.3 [11.9] 26.8 [12.2] 30.0 [13.6] 26.3 [11.9] 26.8 [12.2] 30.1 [13.7] 27.0 [12.2] 27.5 [12.5] 30.7 [13.9] 27.7 [12.6] 28.2 [12.8] 31.5 [14.3] 28.3 [12.8] 28.8 [13.1] 32.2 [14.6] 28.7 [13.0] 29.2 [13.2] 32.5 [14.7] 29.0 [13.1] 29.5 [13.4] 32.9 [14.9] 29.6 [13.4] 30.1 [13.7] 33.7 [15.3] 30.3 [13.7] 30.8 [13.9] 34.4 [15.6] 30.9 [14.0] 31.4 [14.2] 35.1 [15.9] 31.6 [14.3] 32.1 [14.5] 35.9 [16.3] 32.2 [14.6] 32.7 [14.8] 36.6 [16.6] M004-T [16.0] [16.4] [16.9] [17.4] [17.8] [18.3] [18.8] [19.2] [19.7] [20.2] [20.6] MODEL BORE EFFECTIVE PISTON AREA 2 [ 2 ] EXTEND RETRACT 1.95 [1257] 1.64 [1056] 4.83 [3117] 4.34 [2803] 7.79 [5027] 7.03 [4536] ARM LOAD WEIGHT LOAD WEIGHT ARM LOAD WEIGHT MODEL RECOMMENDED MAX LOAD lb kg Use of flow controls recoended at higher loads to reduce shock and vibration A LOAD WEIGHT A ARM MODEL OVERHANG DISTANCE A B TESTED LOAD WEIGHT AT A-B* lb kg *Tested with load weight at each corner for a balanced load B B 7

8 OPTIONS: SERIES PHL HEAVY LIFTER PF02 PORT FITTING - SWIVEL ELBOWS FOR 3/8" TUBE PF04 PORT FITTING - SWIVEL ELBOWS FOR 10 TUBE PF3 HEX Both fittgs sert to the G 3/8 ports the cylder. Both fittgs swivel 360 degrees. FITTING MAY SWIVEL 360 LETTER DIM PF1 PF2 PF3 PF4 PF / PF02 PF04 & & / PF4 PF2 SWIVEL ELBOW FOR PF5 TUBING PF1 TO ORDER FITTING SEPARATELY: FITTING PART NUMBER OPTION PF02 PF & SC01 STOP COLLARS AND SHOCK PADS ON EXTENSION Two travel adjustment stop collars with polyurethane shock pads are used for adjustment of lifter extension. The travel adjustment stop collars allow precise adjustment while the shock pads elimate metal-to-metal contact, thereby reducg noise. SC3 SC2 SC1 SC4 HEX LETTER DIM SC1 SC2 SC3 SC /16 3/ SW71 ONE REED SWITCH INSTALLED SW73 ONE HALL EFFECT SWITCH (PNP) INSTALLED SW72 TWO REED SWITCHES INSTALLED SW74 TWO HALL EFFECT SWITCHES (PNP) INSTALLED See next page for specifications. SW75 ONE HALL EFFECT SWITCH (NPN) INSTALLED 8 SW76 TWO HALL EFFECT SWITCHES (NPN) INSTALLED See next page for specifications. All dimensions are reference only unless specifically toleranced.

9 OPTIONS: SERIES PHL HEAVY LIFTER REED SWITCHES KIT NO DESCRIPTION NPN (Sk) or PNP (Source), 5-240V AC/DC, Quick Disconnect SPECIFICATIONS ACTUATED BY POWER CAPACITY OUTPUT STATE OPERATING PRINCIPLE OUTPUT TYPE OPERATING VOLTAGE CURRENT RATING (RES.) BURDEN CURRENT VOLTAGE DROP CIRCUIT PROTECTION LED COLOR OPERATING TEMPERATURE ENVIRONMENTAL CABLE TYPE WIRING SCHEMATICS SWITCH DC PNP (SOURCING) +DC BROWN BLUE LOAD SWITCH -DC AC BROWN BLUE LOAD Movg Magnet 10 W Max. Normally Open Magnetic Reed SPST Contact Closure 5-240V AC/DC 100mA Max. 2.5 V Max. None Green -10 to 70 C IP67 PVC SWITCH DC NPN (SINKING) +DC BROWN LOAD LINE BLUE NEUTRAL -DC HALL EFFECT SWITCHES KIT NO DESCRIPTION Solid State PNP (Source) 5-30 DC, Quick Disconnect Solid State NPN (Sk) 5-30 DC, Quick Disconnect SPECIFICATIONS ACTUATED BY POWER CAPACITY OUTPUT STATE OPERATING PRINCIPLE OUTPUT TYPE OPERATING VOLTAGE CURRENT RATING (RES.) BURDEN CURRENT VOLTAGE DROP CIRCUIT PROTECTION LED COLOR OPERATING TEMPERATURE ENVIRONMENTAL CABLE TYPE WIRING SCHEMATICS SWITCH DC PNP (SOURCING) +DC BROWN BLACK BLUE LOAD -DC Movg Magnet 6 W Max. Normally Open Magnetic Hall Effect Solid State PNP Solid State NPN 5-30V DC 200mA Max. 13mA Max. 20mA VDC.5 V Max. Power Source Reverse, Surge Suppression Red Green -10 to 70 C IP67 PVC SWITCH DC NPN (SINKING) +DC BROWN BLACK BLUE LOAD -DC Switches and switch brackets are stalled on the cylder as shown below. Replacement switches and switch brackets can be ordered. A switch bracket kit contas one switch bracket. A switch kit contas one switch. DESCRIPTION REED SWITCH HALL EFFECT SWITCH (PNP) HALL EFFECT SWITCH (NPN) SWITCH BRACKET KIT NO PIN 2 (BLACK) SET SCREW FOR FASTENING BRACKET PIN 3 (BLUE) PIN 1 (BROWN) M8 x 1.0 THREAD [184.0].472 [12.0] LED [26.5].443 [11.3] NOTES: 1) ALL DIMENSIONS ARE REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED 2) ONLY ONE SWITCH AND BRACKET ASSEMBLY SHOWN ON LIFTER FOR CLARITY PURPOSES. SET SCREW FOR FASTENING SWITCH xx CORDSET WITH FEMALE QUICK CONNECT PIN 2/4 WIRE COLOR BLACK.402 [10.2] PIN 1 WIRE COLOR BROWN PIN 3 WIRE COLOR BLUE.689 [19.3] [34.8] A CABLE x.177 [4.5] MODEL NO LETTER DIM. A [2 m] [5 m] NOTE: 1) ALL NUMBERS IN [ ] ARE METRIC AND ARE IN All dimensions are reference only unless specifically toleranced. 9

10 EXPLODED VIEW: SERIES PHL HEAVY LIFTER M002 OPTION 13 4 M001 OPTION 9 4 M004 OPTION 8 T001 OPTION T002 OPTION 10

11 PARTS LISTS: SERIES PHL HEAVY LIFTER OPTION Standard Unit PF02 PF04 SC01 SC01 KEY DESCRIPTION ISO Cylder Bearg Flange Bearg Cartridge Assembly Mountg Plate Rod Couplg Tool Plate Couplg Guide Shaft Tool Plate Thrust Washer Flat Washer Guide Shaft SHCS (M10 x 16) Bearg Flange SHCS (M8 x 20) Cylder Mountg SHCS Tool Plate SHCS (M10 x 25) Grease Zerk Plastic Tube Port Fittg Shock Pad Stop Collar M001-T XCPC6-5-xxx xxxx M002-T XCPC6-5-xxx xxxx PART NUMBER -xxx and -xxxx = Stroke () - Available Strokes: 50 (-050 or -0050) 75 (-075 or -0075) 80 (-080 or -0080) (Not available as standard on units) 100 (-100 or -0100) 125 (-125 or -0125) 150 (-150 or -0150) 160 (-160 or -0160) (Not available as standard on units) 175 (-175 or -0175) 200 (-200 or -0200) 225 (-225 or -0225) 250 (-250 or -0250) 275 (-275 or -0275) 300 (-300 or -0300) XCPC4-5-xxx xxxx M004-T XCPC6-5-xxx xxxx ORDERING EXAMPLE: Replacement Cylder Only = -5x100-H4 Replacement Lifter Without Cylder = -5x100-H XCPC8-5-xxx xxxx KIT DESCRIPTION Fastener Kit M001-T001 M002-T001 M004-T002 Stop Collar and Shock Pad Kit Thrust Washer Kit Composite Bearg Kit KITS KIT NUMBER PHD LIFTER DESCRIPTION PHLx-x-050-M004-T002 PHLx-x-075-M004-T002 PHLx-x-100-M004-T002 PHLx-x-125-M004-T002 PHLx-x-150-M004-T002 PHLx-x-175-M004-T002 PHLx-x-200-M004-T002 PHLx-x-225-M004-T002 PHLx-x-250-M004-T002 PHLx-x-275-M004-T002 PHLx-x-300-M004-T002 -xxx = STROKE IN GM SPECIFICATION NUMBER -5-xxx GMGDS CODE -5-xxx xxx

12 APPLICATION EXAMPLE: SERIES PHL HEAVY LIFTER Series PHL Lifter Durg the stampg process, the part configuration may demand the use of lifters. The Series PHL Heavy Lifter provides an ideal solution for liftg heavy or large panels out of dies. The PHL Lifters have the capability to accept customer toolg that can reach to the die to support heavy or large panels. Series PDG Gages Series PHL Lifters Series GRM Clamps Series PDK Crowders /