Torque Limiter Series WT Overview. Torque Limiter Series WT

Size: px

Start display at page:

Download "Torque Limiter Series WT Overview. Torque Limiter Series WT"

Candace Alannah Richardson
5 years ago
Views:

1 Torque Limiter Series WT Overview Torque Limiter Series WT

Torque Limiter Series WT For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design novation and production.

are then sittg on the larger diameter of the plunger and all forces are balanced ternally allowg the torque limiter to run free and unloaded (Fig. C).

Autogard torque limiters act like a mechanical circuit breaker to protect the weakest member of the drive tra.

2 Torque Limiter Series WT For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design novation and production. Autogard products are manufactured to meet ISO 900 usg the latest mache tools and high-quality materials. are then sittg on the larger diameter of the plunger and all forces are balanced ternally allowg the torque limiter to run free and unloaded (Fig. C). Resettg is accomplished by simply aligng the ball modules with their seats and tappg the reset p with a soft hammer. Autogard torque limiters act like a mechanical circuit breaker to protect the weakest member of the drive tra. The most effective location for the torque limiter would be as close as possible to the component beg protected. The Series WT was designed to accommodate water treatment applications and features the Ultra Module. The Autogard WT Modular Series is a mechanical torque limiter corporatg the proven ball detent prciple. The basic unit is comprised of two separate halves. A hardened seat is stalled to one half and a ball module is stalled to the other such a manner that torque is transmitted shear between the drive ball and seat. (Fig. A). As standard torque limiters, this produces an end thrust on the plunger/ drive ball assembly proportion to the applied torque. This force is resisted by a rg of smaller thrust balls trapped between flat and conical washers loaded by disc sprgs. When the axial force reaches a level greater than the reaction through the sprg mechanism the smaller thrust balls are forced up the slope on the plunger allowg the drive ball to disengage from the seat (Fig. B). The smaller thrust balls Adjustg the Overload Torque Settg The trip torque is externally adjustable and is achieved by turng the adjustor to crease or decrease the sprg pressure. Disengagement on Overload When the axial force reaches a level greater than the reaction through the sprg mechanism, the ball and plunger will retract forcg the balls up the plunger slope and allowg the ball to disengage from the seat. The balls are then located on the larger diameter of the plunger and all forces are balanced ternally allowg the torque limiter to run free and unloaded. The unit can also be disengaged manually. This is achieved by clockwise rotation of the disengagement sleeve. This feature disconnects the drive and can be a useful tool for equipment setup and matenance, and can also be used as a replacement for standard jaw clutches. Re-engagement Resettg the unit is accomplished by simply aligng the two halves, positiong the ball over its seat, and tappg the reset p with a soft hammer. Automatic reset versions are also available. Plunger Drive ball Sprgs Seat Balls Adjustor Reset p Manual disengagg sleeve To re-engage Figure A (engaged) Figure B (disengagg) Figure C (disengaged)

Features and Benefits: Staless steel construction to withstand harsh workg environments Accurate and consistent torque settg cludg a Vernier scale on each module to allow consistent and accurate

motor shut down or an alarm signal with use of a proximity sensor or standard limit switch if the optional sensor plate is used Quick and easy reset usg alignment markers; can be manually reset with

3 Features and Benefits: Staless steel construction to withstand harsh workg environments Accurate and consistent torque settg cludg a Vernier scale on each module to allow consistent and accurate torque adjustment Instant and complete disengagement of drive and drivele ertia for optimum protection Adjustable (-place) torque settg to match the actual load requirements Accommodates automatic motor shut down or an alarm signal with use of a proximity sensor or standard limit switch if the optional sensor plate is used Quick and easy reset usg alignment markers; can be manually reset with a soft hammer Manual disengagement is standard to allow for the unit to be disconnected for testg; replaces the need for a separate jaw clutch Low matenance; tegral grease fittgs allow periodic lubrication of the unit without removg it from the drive Matenance and replacement of modules can be performed without removg the torque limiter from the application Selection: Data required for torque limiter selection: Application details for service factors Kilowatt (kw) or horsepower (hp) and rpm of the driver Shaft details of the drivg and driven equipment () Calculate the nomal torque. Torque (lb-) = hp x / rpm Consideration should then be given to start torque or other special circumstances dependg on the position chosen the drive system. Choose a set torque with a suitable marg over nomal. Select the torque limiter which has a higher torque ratg. (2) Check limitg conditions: (a) Check hub bore capacity. (b) Check the torque limiter dimensions such as the overall length and outside diameter. (3) Select and specify the appropriate drive medium. All Autogard Series WT units may be supplied from the factory at a pre-set torque and with required drive medium assembled to the unit. Orderg the Series WT Torque Limiter When orderg, please provide the followg designation: Model & Size / Number of Modules / Bore Standard bore tolerance = H8 + normal fit key/setscrews shaft retention Example: WT- / 2LT /.500 Refers to Series WT Size torque limiter with 2 low torque modules and a bore size of.500 ches. Also specify the sprocket and the torque settg and limit switch plate if required.

4 Model WT ALIGNMENT MARKERS 0.22 MOVEMENT ON TRIP Ø C Ø D Ø E (h7) F BORE Ø B Ø A (OPTIONAL) J G H.0 Table Size Modules (Size-Qty) Low Torque Modules M lb- Max lb- Torque High Torque Modules M lb- Max lb-,250 5,000 3,375 7, ,500 0,000 6,750 5,000 4 N/A N/A N/A N/A,500 6,000 4,050 9, ,000 2,000 8,00 8,000 4 N/A N/A N/A N/A,750 7,000 4,950, ,500 4,000 9,900 22,000 4 N/A N/A N/A N/A 2,500 0,000 6,750 5, ,000 20,000 3,500 30, ,000 40,000 27,000 60,000 Weight Ib Weights estimated based on units with unbored hubs and 2 modules. Table 2 Type designed to accept a sprocket suitable for the water treatment dustry Size Maximum Bore A B C D E F G H J Smallest H78 Sprocket (m. teeth) (6) 3/8 UNC X 3/ (6) 3/8 UNC X 3/ (6) /2 UNC X 3/ (8) 3/8 UNC X 3/4 Bores are furnished for clearance fit unless otherwised specified by customer. Rectangular keys must be used for maximum bore diameters.

5 Series WT Applications Primary Wastewater Tanks Secondary Wastewater Tanks Clarifiers

Matenance and General Safety Information Protective Fish As a standard, all series WT torque limiters are manufactured from staless steel. For any exceptions, please consult Rexnord.

6 Matenance and General Safety Information Protective Fish As a standard, all series WT torque limiters are manufactured from staless steel. For any exceptions, please consult Rexnord. Matenance The frequency of matenance will depend on the operatg environment and number of trips, but once every 2,000 operatg hours should be adequate most applications. The amount of matenance required is dependent upon the operatg conditions and should be mataed at least as frequently as the adjacent drive components. In adverse conditions, consult Rexnord. General Safety The Autogard Torque Limiter is a reliable unit, built to high standards of workmanship. Similar to all mechanical devices, each application must be considered on its own merits with reference to safety (i.e. liftg equipment, explosive conditions, etc). As a rotatg component, adequate guardg must be provided, accordance with local codes. The tended use of the torque limiter is for the protection of dustrial machery and it is not to be regarded as a human safety device. Rexnord staff are always available to discuss particular applications. Series WT Industries Water Treatment

7 Other Autogard Products Autogard Torque Limiter Series 200 Autogard Torque Limiter Series 320 Autogard Torque Limiter Series 400 Autogard Torque Limiter Series 600 Autogard Torque Limiter Series 820 To learn more about the Autogard Torque Limiter offerg and how it can provide you with high-quality overload protection, go to where you ll fd: Product formation Brochures Manuals (For Autogard Products) All Other Inquiries: 866-REXNORD/ (toll-free with the U.S.) or (Outside the U.S.)

8 (For Autogard Products) Why Choose Rexnord? When it comes to providg highly engeered products that improve productivity and efficiency for dustrial applications worldwide, Rexnord is the most reliable the dustry. Commitment to customer satisfaction and superior value extend across every busess function. Deliverg Lowest Total Cost of Ownership The highest quality products are designed to help prevent equipment downtime and crease productivity and dependable operation. All Other Inquiries: 866-REXNORD/ (With the US) (Outside the US) Valuable Expertise An extensive product offerg is accompanied by global sales specialists, customer service and matenance support teams, available anytime. Solutions to Enhance Ease of Dog Busess Commitment to operational excellence ensures the right products at the right place at the right time. Rexnord Corporation Rexnord is a growth-oriented, multi-platform dustrial company with leadg market shares and highly trusted brands that serve a diverse array of global end markets. Process and Motion Control The Rexnord Process and Motion Control platform designs, manufactures, markets and services specified, highly engeered mechanical components used with complex systems where our customers reliability requirements and the cost of failure or downtime are extremely high. Water Management The Rexnord Water Management platform designs, procures, manufactures and markets products that provide and enhance water quality, safety, flow control and conservation. 204 Rexnord Corporation TQ-006 Prted USA 05/4 Autogard is a subsidiary of Rexnord Corporation

Torque Limiter T-Series Overview. Autogard Torque Limiter T-Series

Torque Limiter T-Series Overview. Autogard Torque Limiter T-Series Torque imiter T-Series Overview Autogard Torque imiter T-Series Torque imiter T-Series For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design