Jackie Levy- President Dave Brewer- Waterworks General Manager
|
|
|
- Roxanne Janis Greer
- 5 years ago
- Views:
Transcription
1
2
3 Division Robar Quebec Jackie Levy- President Dave Brewer- Waterworks General Manager Jonathan Reinheimer P. Eng- Engineering Manager Frank Raposo-Quebec Sales Division Darren Murphy- Quebec Operations Manager Jason Wysocki, Trevor Eden- Inside Sales
4 Surrey Boucherville Calhoun
5 Couplings
6
7 Couplings 1506/1508 Catalog catalog links\1.4.0.pdf
8 Couplings 1506/1508 Catalog catalog links\1.4.0.pdf **Special Consideration** When using a stepped coupling, make sure that the thrust from the reduction has been accommodated..
9 Couplings 1400/1500 Stab Fit Catalog catalog links\stab- Fit_ENG.pdf
10 Isolating Boot 1180 Catalog..\..\..\Catalog\new catalog\coupling_11 80&1410&1510.pdf
11 Isolating Boot 1180 FIELD Photo
12 ARPOL Coupling Construction Bolt Inner steel bridge (lock) Bar Casing Sealing gasket
13 ARPOL Coupling Construction Stainless Steel inner band Used in vacuum and large diameter wide coupling application
14 ARPOL Coupling Construction Coupling casing-stainless 304/316 and coated carbon (Copolymer) Locking bar bolts-stainless 304/316 and carbon steel (Dacromet) Gasket material-epdm, Viton, NBR and Silicon
15 ARPOL Gasket Seal ARPOL_ Presentat ion_ pdf
16 Arpol Coupling Product Styles Arpol Instal used for pipeline connections of the same size in non restrained applications instal_140_iby-ify.pdf
17 Arpol Coupling Product Styles Arpol Rep used for in-place pipeline repairs rep_200_ibzr-igzr_ibz3-igz3.pdf
18 Arpol Coupling Product Styles Arpol Rep used for coupling in-place plain end pipe
19 Arpol Coupling Product Styles Arpol Rep used to couple in place piping typical inside a structure
20 Arpol Coupling Product Styles Arpol Fix used for plain end pipeline connections where axial restraint is needed fix_m.pdf, fix_u.pdf
21 Water Break HDPE Pipe
22 Displacement once pressurized
23 Arpol Coupling Product Styles Arpol MultiFix used for PVC/HDPE pipeline connections while also providing axial restraint and allowable movement
24 9626 Inserts Catalog catalog links\2009 PAGE.pdf
25 Fabricated Coupling Robar 1800/1900 Catalog catalog links\2009 PAGE.pdf
26 Fabricated Coupling Size & Pipe Types All types of pipe Fabricated Mild Steel Plate Able to accommodate different pipe nominal sizes High pressure applications Conforms to the AWWA C219 standard 6-48 in stock in Surrey, BC Coating Shop Coat Enamel Center Sleeve Standard 7 barrel length, other lengths are easily available
27 Fabricated Transition Coupling Size & Pipe Types All types of pipe Fabricated Mild Steel Plate Able to accommodate different pipe nominal sizes High pressure application Restraining mechanism must be used Conforms to the AWWA C219 standard in stock Surrey, BC Center Sleeve Standard 10 barrel length, other lengths are easily available
28 Fabricated Coupling Robar 1906
29 Couplings & 1408 Reducing Sewer force main repair on 450mm AC & Old Cast
30 Couplings Problem Old Coupling leaking
31 Couplings & 1408 Repair Old coupling and a section of AC pipe removed
32 Couplings & 1408 Reducing A Robar 1408 & a 1408R coupling used to join AC to C 900 to Old Cast
33 Robar Vantage Wide-Range Coupling Catalog catalog links\2009 VANTAGE COUPLING PAGE.pdf
34 Robar Vantage Wide-Range Coupling Robar Vantage Coupling ranges: IPS-Class 200 AC IPS-Class 200 AC IPS-Class 200 AC IPS-Class 200 AC IPS-Class 200 AC
35 9626 Inserts 9626 inserts being installed
36 5600 Series Repair Clamps 24 Sewer Main Repair Scenario The emergency call came in Saturday morning, the repair clamp shipped out at noon that day..
37 5600 Series Repair Clamps Catalog catalog links\2009 PAGE.pdf Repair Clamps with ductile lugs are now available at Robar Catalog catalog links\2009 PAGE.pdf
38 Dismantling Joints
39 Robar Dismantling Joints 4 12 Ductile Iron body, model # 7506 Ideal for providing access points when connecting appurtenances that require future maintenance: Water Meters Valves Pumps Other flange to flange fittings Fully restrained Coupling7400_7500_DMJ.pdf Fabricated Carbon Steel, model # 7906
40 Robar 7506 Dismantling Joint Robar 7506DJ used in between a gate valve and a PRV
41 Robar 7506 Dismantling Joint Submittal Drawing
42 Robar Pipe Stands**NEW**
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
Cast and fabricated waterworks fittings. Proven and time tested. Quality you can depend on.
Cast and fabricated waterworks fittings. Proven and time tested. Quality you can depend on. TABLE OF CONTENTS TAB SECTION CONTENTS PAGE 0 Forward 0.1.1 1 Couplings, End Caps, Accessories and Fabricated
Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
THOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines
Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect
UNION-TITE DUCTILE IRON C153 COMPACT FITTINGS
Sizes 4"-12" UL Listed for Fire Main Equipment SAMPLE SPECIFICATIONS (Current ANSI/AWWA revisions apply) 4" through 24" Push-On joint ductile iron fittings shall be produced in accordance with all applicable
Ford Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
Ford Bolted Flex Couplings. Section M. 5/2008; Web Revision 10/2010
Section M 5/2008; Web Revision 10/2010 Ford Bolted Flex Couplings The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487
Section M. 06/2017 Web Revision 12/15/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Cast Couplings and Adapters
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section M 06/2017 Web Revision 12/15/2017 Ford Cast Couplings and Adapters Contents Page Coupling Numbering System.... 3 Features
HYMAX GRIP Wide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine
Section M. 04/2014 Web Revision 10/02/2015. Ford Bolted Flex Couplings
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section M 04/2014 Web Revision 10/02/2015 Ford Bolted Flex Couplings Contents Coupling Numbering System... 3 Features of Ford Cast Couplings, Style
Ford Brass Saddles Style 101B and 202B
101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,
MACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number:
ACROMACROMACROMA MACRO HP ROMAC S SECOND GENERATION TWO-BOLT E X T E N D E D R A N G E C O U P L I N G NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes patent number: 8448993 BMACROHP
THOMAS. PolyGrip Range. Couplings & Flange Adaptors Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Restrained Products PIPE PRODUCTS PolyGrip Range Restrained Couplings, Flange Adaptors, End Caps and Harnesses for HDPE and PVC Pipe D1 PolyGrip Range Application Fully
Ford Service Saddles and Tapping Sleeves
Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171
Steel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
Section 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
TABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
SCOPE OF WORK WASTEWATER TREATMENT PLANT THE WORLD LEADER IN PIPE JOINING SOLUTIONS
SCOPE OF WORK WASTEWATER TREATMENT PLANT THE WORLD LEADER IN PIPE JOINING SOLUTIONS THE VICTAULIC DIFFERENCE HOUSING GROOVE GASKET BOLT/NUT GROOVE GROOVED PIPE JOINING TECHNOLOGY How does it work? The
HYMAX GRIP by Krausz Restraint Solutions
HYMAX GRIP by Krausz Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. Krausz restraint products combine
DENSITY POLYETHYLENE PIPE
Effective September 2, 2010 Replaces 9/2/08 U.S. Price $14.00 JCM INDUSTRIES Fittings and Fabrications Designed and Engineered for HIGH DENSITY POLYETHYLENE PIPE HDPE JCM Industries, Inc. P. O. Box 1220
Utilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
THOMAS. Unifit Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe H1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED BELLVILLE
VALVES, FIRE HYDRANTS, AND APPURTENANCES
VALVES, FIRE HYDRANTS, AND APPURTENANCES PART 1 - GENERAL 1.01 SECTION INCLUDES A. Butterfly Valves B. Gate Valves C. Tapping Valve Assemblies D. Fire Hydrant Assemblies E. Flushing Devices (Blowoffs)
FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED HIGH DENSITY POLYETHYLENE PIPE
Effective May 24, 2002 Cancels all previous publications U.S. Price $12.95 FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED FOR HIGH DENSITY POLYETHYLENE PIPE JCM Industries, Inc. P.O. Box 1220 Nash,
THOMAS. Large Diameter Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Large Diameter Couplings Dedicated Connections For Rigid Large Diameter Pipework F1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED
Style 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
INFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:
INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT
HYMAX VERSA by Krausz Coupling and Repair Solutions
HYMAX VERSA by Krausz Coupling and Repair Solutions HYMAX VERSA. VERSATILE STAINLESS STEEL COUPLING. Krausz HYMAX VERSA products provide a highly versatile stainless steel coupling solution for connecting
TYLER UNION. Quality Waterworks Products. PC-2017, March, REGISTERED FIRMISO 9001:2015. Tyler Union
TYLER UNION Quality Waterworks Products WATERWORKS CATALOG PC-2017, March, 2017 www.tylerunion.com 10014257 U L REGISTERED FIRMISO 9001:2015 CERTIFIED Tyler Union 11910 CR 492 TYLER, TEXAS 75706 (800)
mechanical coupling system
mechanical coupling system R Since 1981 Depend-O-Lok has offered engineers, contractors, OEM s and system owners an improved pipeline coupling system. Depend-O-Lok products offer strength, longterm reliability,
San Antonio Water System Standard Specifications for Construction ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS
ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS 836.1 DESCRIPTION: This item shall consist of grey-iron and ductile-iron fittings installation and adjustment installed in accordance with these specifications
TAPPING & SERVICE SADDLES
TAPPING & SERVICE SADDLES The Standard of Excellence in the Industry CS12 CSC1 CS22 CSC2 CNS1 CDS1 CNS2 CDS2 CFS CFT-TO 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630)
Wide-Range Coupling Solutions
Wide-Range Coupling Solutions HYMAX. CONNECTING THE FUTURE. A revolutionary product that set a new industry standard, the HYMAX* product line has been field-proven in millions of installations world-wide.
CASING SPACERS DESIGNED FOR WATER, SEWER, OIL & GAS
CASING SPACERS DESIGNED FOR WATER TER,, SEWER,, OIL & GAS The BWM Company P.O. Box 1 Forest City, North Carolina 2803 Phone: 828.27.030 Toll Free 8 5 SPACER Fax: 828.25.59 www.bwmcompany.com BWM will provide
TYLER UNION IMPORT RESTRAINTS LP NR
SERIES 1000 MJ TUFGRIP WEDGE TYPE RESTRAINT FOR DUCTILE IRON PIPE MJ TUFGRIP for DI Pipe - GLAND ONLY N70-5760 MJ TUFGRIP for DI Pipe - W/ ACCESSORIES N71-6795 3 113805 $42.94 7 150 3 114352 $65.05 10
REPAMAX. Versatile Stainless Steel Coupling. Versatile Stainless Steel. By Krausz Wide-Range Couplings. Joins as a coupling. Repairs as a clamp.
JOIN REPAIR RESTRAIN REPAMAX Versatile Stainless Steel By Krausz Wide-Range Couplings Joins as a coupling. Repairs as a clamp. Versatile Stainless Steel Coupling REPAMAX Product Information Versatile Stainless
two pipes. two screws. two minutes 1
two pipes. two screws. two minutes 1 www.teekaycouplings.com Contents Introducing the Teekay Pipe Coupling System... 3 Mechanical and Sealing Concepts... 4 Axilock-S and Axilock... 6 Axilock-FP and Axilock-FP
The Number One Choice of Line Stopping Contractors
JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest
Pipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING
MULTIPLIER SERVICE SADDLES MODEL 3401 BRONZE SADDLE FOR IPS PVC BODY CASTINGS: Waterworks Bronze (85-5-5-5) per ASTM B584 and AWWA C800. FASTENERS: Silicon Bronze per ASTM B98. GASKET: Patented SBR TwinSeal
Cam-Lock 111, 120 Joint Restraints Patent Pending
111, 120 Joint Restraints The Next Generation Joint Restraint Technology Smith-Blair Cam-Lock joint restraint products provide a fast and economical means restraining mechanical joint water and wastewater
+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.
Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
C909 PVC Pipe Patent Pending
1113 - H Copyright 2011 EBAA Iron, Inc. All Rights Reserved 19MJ00 Mechanical Joint Restraint for 4 through 12 inch C909 PVC Restraints for C909 PVC Pipe Patent Pending Features and Applications: For use
SECTION 17 FIRE HYDRANT ASSEMBLIES General
SECTION 17 FIRE HYDRANT ASSEMBLIES 17-1.01 Scope 17-1 General This section describes the requirements for furnishing and installing as appurtenances to treated water mains. These requirements include the
PRICES EFFECTIVE JULY 1, 2017 (REPLACES CATALOG DATED, APRIL 30, 2012)
PRICES EFFECTIVE JULY 1, 2017 (REPLACES CATALOG DATED, APRIL 30, 2012) REPAIR CLAMPS COUPLINGS SERVICE SADDLES SEWER PRODUCTS TAPPING SLEEVES RESTRAINT SYSTEMS HDPE PIPE PRODUCTS DRILLING & TAPPING EQUIPMENT
TECHNICAL SPECIFICATIONS OF METROPOLITAN WATERWORKS AUTHORITY OF THAILAND
TECHNICAL SPECIFICATIONS OF METROPOLITAN WATERWORKS AUTHORITY OF THAILAND UNDERGROUND STEEL PIPE 1. Inside lining shall be cement mortar in accordance with AWWA C205 for pipe diameters 150-700 mm. OR liquid
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR
FLEXIBLE COUPLINGS GRIP / EASY / SADDLE BORCLAMP / LIGHT / PVC BORSTEP / ADAPTOR Bortek Pipe Coupling Systems info / order by mail bortek@bortek.com.tr info / order by Fax +90 / 212 876 55 26 info / order
Pioneers in pipe solutions NOW. up to DN600
Pioneers in pipe solutions NOW Available up to DN600 Get to grips with the NEW DN600 Key Benefits Grips and seals on the most corroded pipes Increased diameter range and wide tolerance delivers a reduction
VR Piston Check Valves Submittal Data Sheet. Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: introduction
Submittal Data Sheet Job or Customer: Engineer: Contractor: Submitted by: Approved by: Order No: Specification: Date Date Date introduction < STANDARDS > The IPEX VR Piston Check Valve is an ideal solution
SECTION SWING CHECK VALVES
PART 1 GENERAL 1.1 DESCRIPTION This section includes materials, testing, and installation of swing check valves as shown in the Drawings and specified herein, in accordance with the requirements of the
DENSITY POLYETHYLENE PIPE
Effective January 15, 2016 Replaces 9/2/10 U.S. Price $14.00 JCM INDUSTRIES Fittings and Fabrications Designed and Engineered for HIGH DENSITY POLYETHYLENE PIPE HDPE JCM Industries, Inc. P. O. Box 1220
JCM 101 Universal Clamp Couplings
JCM 1 Universal Clamp Couplings JCM 1 Universal Clamp Coupling - Single Band JCM Universal Clamp Couplings provide a full circumferential seal and wide range for the permanent repair or reconnection of
Butterfly Valve. Product Training Presentation Danfoss Flomatic Corporation
Click to see: Butterfly Valves in our Online Catalog Butterfly Valve Product Training Presentation Danfoss Flomatic Corporation REV:082303 Butterfly Valve SYLAX SERIES 149G BUTTERFLY VALVES Wafer and Lug
PIPE REPAIR PRODUCTS REPAIR CLAMPS
PIPE REPAIR PRODUCTS REPAIR CLAMPS The Standard of Excellence in the Industry 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630) 553-0181 www.cascademfg.com 2007-2015
2009 Edition. Tyton fittings 14"-24" NSF. For Water & Wastewater, Fire Protection & Industrial Applications. Certified to ANSI/NSF 61
14"-24" Tyton fittings For Water & Wastewater, Fire rotection & Industrial Applications 2 Table of Contents TYTON Fittings 3 Assembly of TYTON Fittings 4 Bell Dimensions 6 Thickness and Dimensions 90 Bends
PRODUCT CATALOG TPS UNI-COUPLING. Your repair is our care
PRODUCT CATALOG TPS Your repair is our care UNI-COUPLING HIGH FLEXIBILITY AND SAFETY MARGINS DETERMINE THE BASIC PRINCIPLE OF UNI-COUPLING Two types of UNI-Coupling UNI-Coupling applies one unique technical
Super Flange series 7200 Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes
Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes INFORMATION The Series 7200 Super Flange is a restrained flange adapter designed to connect plain end pipe to a flange end component. May
411 Steel Couplings Material Specifications
411 Steel Couplings Material Specifications Gasket Material Specifications STANDARD: Nitrile (Buna-N)-NSF 61 Compounded to produce superior storage and performance characteristics while resisting water,
Precision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
ALPHA Wide Range Restrained Joint
ROMAC INDUSTRIES, INC. 1-800-426-9341 www.romac.com MADE IN U.S.A. January 8, 2015 ALPHA Wide Range Restrained Joint WIDE RANGE RESTRAINED JOINT Wide covers DI through IPS PVC pipe diameters without having
F C S H
FORD BOLTED FLEX COUPLINGS Ford Bolted Coupling Numbering System TYPE OF COUPLING FC1 = Ductile Iron Coupling FC2A = Ductile Iron Transition Coupling FIB = Insulating Boot for Ductile Iron Pipe and Cast
ATLANTIC PLASTICS is a company of. UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors
ATLANTIC PLASTICS is a company of UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors The UPE MultiDiameter range of wide tolerance couplings and flange adaptors can be used for almost any
UNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings
UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in
TEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
Smith-Blair OMNI Coupling System Advantages:
OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI
5. STRAUB-FLEX / STRAUB-REP
5. STRAUB-FLEX / 5.1 STRAUB-FLEX For gas and water supply, sewage treatment, industrial plants, power plants and shipbuilding: STRAUB- FLEX is the optimal pipe joint. Suitable for suction or pressure lines,
Elbow ball check valves PRODUCT CATALOG
Elbow ball check valves PRODUCT CATAOG Version 01.16 Technical data Range of available diameters: 32 300. Pressure rated to PN 1.6 MPa (all valves are tested to PN 1.0 MPa leak test / PN 1.6 MPa hydrostatic
SECTION VIII. (Sub-section 430) Wastewater Valves and Appurtenances. 1. General thru Gate Valves thru 430-3
SECTION VIII (Sub-section 430) Wastewater Valves and Appurtenances Article Page 1. General 430-1 thru 430-2 2. Gate Valves 430-2 thru 430-3 3. Plug Valves 430-3 thru 430-4 4. Check Valves 430-4 5. Tapping
InsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve
Material Specifications Material Specifications Sleeve 10" - 12" installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
visit us online at
PRICE SHEET (PL-1014-VLV Replaces PL-0513-VLV) TABLE OF CONTENTS VALVES & HYDRANTS Page(s) Product Line Price Sheet 1 AWWA C515 Gate Valves NRS Series 2010 & 1010 PL-1014 Multiplier 2 AWWA C515 Gate Valves
September 2012 / M&H C502 / Model 129
GENERAL FEATURES / GENERAL SPEC M&H AWWA C502 FIRE HYDRANTS Model 129 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approved Type: Compression type, opening against line
BUTTERFLY VALVES KENNEDY 140 YEARS AWWA C504 CLASS 150B & 250B CERTIFICATIONS ISO 9001 ISO BS OHSAS
KENNEDY BUTTERFLY S CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C504 CLASS 150B & 250B STYLE 4500 3-24 STYLE 1450 30-54 CONSULT KENNEDY FOR SIZES LARGER THAN 54 INCHES. 140 YEARS WWW.KENNEDY.COM
THOMAS. Low Pressure SS Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Low Pressure SS Couplings Couplings for Structured Wall HDPE Pipe & Low Pressure Applications G1 COUPLINGS & FLANGE ADAPTORS - NON
RESTRAINED JOINT HP LOK 30" 64" RESTRAINED JOINT NSF WATER & WASTEWATER. Certified to ANSI/NSF 61
2 0 1 6 30" 64" E D I T I O N NSF WATER & WASTEWATER NSF P 2 Table of Contents Restrained Joint Pipe and Fittings 30" 64" 3 Suggested Specifications for Restrained Push-On Joint Pipe and Fittings 4 Joint
San Antonio Water System Standard Specifications for Construction ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS
ITEM NO. 836 GREY-IRON AND DUCTILE-IRON FITTINGS 836.1 DESCRIPTION: This item shall consist of grey-iron and ductile-iron fittings installation and adjustment installed in accordance with these specifications
FIG Gruvlok Flange Adapter
FIG. 88 Gruvlok Adapter The Gruvlok Fig. 88 Adapter allows for direct connection of Class 125 or Class 150 flanged components to a grooved piping system. The Gruvlok Adapter provides an alternative method
K81-D FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-D FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J L M K N P Q S R
GENERAL FEATURES / SPEC M&H AWWA C502 FIRE HYDRANTS Style 929 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approval Type: Compression type, opening against line pressure.
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
AVK SAUDI VALVES MANUFACTURING COMPANY
AVK SAUDI VALVES MANUFACTURING COMPANY AVK SERIES 24 - HIGH PRESSURE, WET BARREL HYDRANT FIELD MAINTENANCE AND INSTRUCTION MANUAL TABLE OF CONTENTS EXPLODED ASSEMBLY / PARTS LIST INTRODUCTION / DESCRIPTION
Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
Terms and Conditions of Sale
Terms and Conditions of Sale (1) GENERAL All orders and contracts are subject to acceptance by JCM Industries, Inc. at Nash, Texas. The terms as hereinafter written shall supersede the terms of the customer
THOMAS. Ultra Saddles & Tees. Tap In Products PIPE PRODUCTS. Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps
THOMAS PIPE PRODUCTS Tap In Products Ultra Saddles & Tees Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps E1 Ultra Saddles & Tees Overview For a Permanent and Simple Tap In Solution for
FKL PUMP HEAD ASSEMBLY
FKL Series Pumps 14 FKL PUMP HEAD ASSEMBLY (FOR COP PUMP HEAD ASSEMBLY, SEE PAGE 21) 25 24 51 28 12b 31 23 53 52 15 30 29 9b 26 10 3 5 12600616 7/1/2011 33 32 11b 36 FKL PUMP GEARBOX ASSEMBLY 39d 34 9a
Price List Import Restraints
LP2016-NR Effective: February 1, 2016 Supersedes All Previous Pricing Import Restraints For Other Products See: LP2015-ND - Import Utility Fittings, Glands, Accessory Packs LP2015-D - Domestic Utility
RANGER FLANGE ADAPTORS
RANGER ADAPTORS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. Because of the
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe
Joint Restraint Products PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is a unique product with
Suggested Specifications
TTR Group Inc. The Engineered Valve & Speciality Products Company Suggested Specifications Meeting and Exceeding AWWA Guidelines AWWA C 504 Latest Revision Butterfly Valves AWWA C 508 Latest Revision Check
JCM PRICE LIST EFFECTIVE SEPTEMBER 1, 2017
JCM PRICE LIST EFFECTIVE SEPTEMBER 1, 2017 To Our JCM Customers, Enclosed is the updated JCM price list effective September 1, 2017. The increase ranges 4 5% on standard catalog pipe products and % on
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe
PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is an exceptional restraint system for mechanical
H D CONTENTS HDPE-1. July, 2017 HDPE
CONTENTS July, 2017 PROUCTS FOR...2 FASTP ALL STAINLESS STEEL TAPPING SLEEVE...3 FTSSP ALL STAINLESS STEEL TAPPING SLEEVE...4 FTSP AN FTSCP STEEL TAPPING SLEEVES...5 MECANICAL JOINT AAPTER OUTLET...6 FCP202
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
STRAUB Pipe Couplings
2017 STRAUB Pipe Couplings PROGRESSIVE SEALING EFFECT STRAUB-GRIP PROGRESSIVE ANCHORING EFFECT Joins different pipe materials STRAUB-FLEX SIMPLE RAPID STRAUB-GRIP VIBRATION AND NOISE DAMPING Progressive
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
Data Sheet Issue A
General Description The Rapidrop Fig 601/602 dry barrel post / flushing fire hydrant is designed to be a trouble free, easy to maintain hydrant. The Fig 601/602 fire hydrant is rated for a working pressure
Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS
SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable
INSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS.
MADE IN U.S.A. Valve insertion, simplified 10-12 installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than 2 hours Much