JCM PRICE LIST EFFECTIVE SEPTEMBER 1, 2017

Size: px
Start display at page:

Download "JCM PRICE LIST EFFECTIVE SEPTEMBER 1, 2017"

Transcription

1 JCM PRICE LIST EFFECTIVE SEPTEMBER 1, 2017 To Our JCM Customers, Enclosed is the updated JCM price list effective September 1, The increase ranges 4 5% on standard catalog pipe products and % on tools and accessories. Quotations and existing pricing contracts in effect before that date will be held in place until their quoted expiration date. These prices will cancel all previous list prices issued since JCM holds the current freight allowance at $2, net order. Included in this book are the new products and sizes JCM has released in the past four years, including: JCM 432 Type 2 & 42 Type 2 Stainless Steel Tapping Sleeves - Fabricated Lug Lightweight Design. JCM 502 Stainless Steel Service Saddle JCM 2/211/2 Series Couplings with Large Diameter Sizes The price list is also available for download on the home page of the website ( in both the MS Excel and Adobe PDF versions for your convenience. JCM appreciates the opportunity to serve your organization. Should you have any questions regarding this new price list, quotations, orders or any of our products, please contact JCM Customer Service or your regional JCM Sales Representative. Respectfully, John Collins Chief Executive Officer JCM Industries, Inc.

2 JCM Industries, Inc. Distributor Discount Structure Effective September 1, 2017 Discounts are applicable to JCM Pipe Fittings and Fabrications Price List Effective September 1, 2017 Cancels all previous prices List Prices Discount 0 - $1, % $1, $, % $, and above 53% Freight Allowance: $2, Net Order of Products with Prices Listed 09/01/17 JCM INDUSTRIES, INC.

3

4 Terms and Conditions of Sale (1) GENERAL All orders and contracts are subject to acceptance by JCM Industries, Inc. at Nash, Texas. The terms as hereinafter written shall supersede the terms of the customer order in the event of contradiction or inconsistency. Prices, terms and conditions published by JCM Industries, Inc. are subject to change without notice. (2) TERMS OF PAYMENT Minimum net billing is fifty U. S. dollars ($50.00) on all orders. To encourage early payment a one percent (1%) Cash Discount will be allowed on all invoices paid not later than fifteen () days from invoice date. Payment of full invoice amount is due within thirty (30) days from invoice date. Past due accounts are subject to the maximum legal rate of interest. Payment is to be in U.S. dollars. (3) TAX All sales, use or other taxes imposed on any transaction between JCM Industries, Inc. and the Buyer shall be paid in full by Buyer. Such taxes will be added to the amount shown payable on the invoice. (4) BIDS AND QUOTATIONS Specific bids and quotations will be honored for thirty (30) days from written quotation unless otherwise specified therein. Buyer may with the express written consent of JCM Industries, Inc. make changes in the specifications for material or work covered by the contract. In such event the contract price and delivery dates shall be equitably adjusted. JCM Industries, Inc. shall be entitled to payment for reasonable costs and expenses incurred by it for works and materials rendered unnecessary as a result of such changes and for works and materials required to effect said changes, plus JCM Industries, Inc. usual profit thereon. (5) FREIGHT, SHIPMENT AND TITLE All sales are made F.O.B. JCM Industries, Inc. shipping point. JCM Industries, Inc. shall have the right to select the carrier and route of shipment. Title for products shipped by JCM Industries, Inc. passes to Buyer upon delivery to the carrier. () INSPECTION AND CLAIMS All products and parts shall be finally inspected and accepted within ten () days after receipt. All claims whatsoever by Buyer (including claims for shortages) excepting only those provided for under the Warranty and Limitation of Liability clauses hereof must be made within said ten () day period or they are waived. Title and risk of loss or damage to products shipped by JCM Industries, Inc. passes to the Buyer upon delivery to the carrier. JCM Industries, Inc. will not file claims against carriers for Buyer but will render reasonable assistance to Buyer in filing any such claim. (7) RETURNS AND CANCELLATIONS Returns will be accepted only with prior written authorization by JCM Industries, Inc. All returns made without prior written authorization will be refused or returned to the shipper at his expense. Authorized returns are subject to a fifty percent (50%) or a minimum twenty-five dollars ($25.00) handling charge. No credit will be allowed for products which cannot be made resalable, products manufactured to Buyer s specifications nor any obsolete products. Any returned material requiring reconditioning will be subject to charges equal to those necessary to make the products resalable. Material or work which remains to be furnished may be cancelled by Buyer only with the express written consent of JCM Industries, Inc. In the event of such cancellation, JCM Industries, Inc. shall be entitled to payment for the cost and expenses incurred by it in connection with the material or work so cancelled, plus an amount determined by applying JCM Industries, Inc. usual rate of profit for similar items to such costs and expenses, or fifteen percent (%) of the contract price. () WARRANTY - LIMITATION OF LIABILITY - EXCLUSION OF WARRANTIES All products manufactured by JCM Industries, Inc. are carefully inspected prior to shipment. Each product is warranted against defects in materials and workmanship. In the event a product is found to be defective in materials or workmanship the Buyer s exclusive remedy under this warranty is expressly limited to replacement, repair or repayment of the purchase price at the option of JCM Industries, Inc. The net invoiced price is the limit of liability. No claims or any consequential or special damages will be allowed. Any defective parts of products must be held for inspection by JCM Industries, Inc. and returned to JCM Industries, Inc. Nash, Texas, promptly upon request. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE, AND ARE IN LIEU OF ALL OTHER WARRANTIES (WHETHER WRITTEN, ORAL OR IMPLIED) INCLUDING WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ALL CLAIMS FOR BR OF WARRANTY SHALL BE PRESENTED TO SELLER WITHIN THIRTY (30) DAYS AFTER DISCOVERY OF THE DEFECT IN THE GOODS, OR BE BARRED. (9) DELIVERY Delivery dates indicated in order confirmations are approximate and are based on prompt receipt of all necessary information regarding the products covered by the contract. JCM Industries, Inc. will use its best efforts to meet the indicated delivery dates, but cannot be held responsible for its failure to do so due to fire, war, civil commotion, strikes, failure of transportation, any act of God, or other causes beyond its control. In the event of any delay in delivery caused by Buyer, JCM Industries, Inc. will store and handle all items ordered at Buyer s risk and will invoice Buyer for the unpaid portion of the contract price, on or after the date on which the products is ready for delivery. This amount will become due and payable in full within thirty (30) days from invoice date. A monthly storage and extra handling charge of one percent (1%) per month or any fraction thereof of the contract price covering the stored product shall be billable as a separate item. () PRODUCT IMPROVEMENT Products produced by JCM Industries, Inc. are engineered to meet service requirements. From time to time products will be improved at the discretion of JCM Industries, Inc. When this occurs, previous designs will not be replaced in the field unless they have been proven defective. (11) CONTRAVENING LAW Should any term or provision contained in the contract contravene or be invalid under applicable law, the contract shall not fail by reason thereof but shall be construed in the same manner as if such term or provision had not appeared therein. () DEFAULT Notwithstanding anything hereinabove to the contrary, all sums due and owing and not paid within thirty (30) days from invoice date shall bear interest at the rate of eighteen (1%) percent per annum from the date incurred until paid. Buyer agrees to pay not only all invoiced amounts, but also interest as provided above and all costs and expenses of collecting the above, including but not limited to court costs, attorney fees reasonable in relation to the work expended, and expenses and costs related to recovery and protection of the goods sold; all sums payable to JCM Industries, Inc. at its offices in Nash, Bowie County, Texas. To secure the payment of all the above sums, principal, interest, and expenses and costs, Buyer hereby grants to JCM Industries, Inc., a security interest in all goods sold to Buyer by JCM Industries, Inc., and all proceeds from, products of, accessions to, and documents of title concerning such goods. (13) GENERAL This Agreement and all sales transactions made pursuant to this Agreement shall be governed by the laws of the State of Texas, and to the extent applicable any federal laws having application within the State of Texas. It is provided that in no event whatsoever shall interest be contracted for, charged, or collected in excess of the maximum interest allowable by law. JCM INDUSTRIES, INC. / P. O. BOX 20 / NASH, TEXAS / (903) JCM INDUSTRIES, INC. Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

5 JCM INDUSTRIES, INC. PRICE CATALOG INDEX September 1, 2017 GENERAL INFORMATION Terms & Conditions... Inside Front Cover Catalog Number Comparison Guide Pipe O.D. Guide...Back Cover UNIVERSAL CLAMP COUPLINGS / REPAIR FITTINGS Page 1 Universal Clamp Coupling - Standard Range Universal Clamp Coupling - Extended Range... 5 Universal Clamp Coupling For Sewer Pipe All Stainless Universal Clamp Coupling - Standard Range All Stainless Universal Clamp Coupling - Extended Range Gas Repair Clamp... 1 All Stainless Gas Repair Clamp All Stainless Steel Fabricated Lug Clamp... All Stainless Steel Fabricated Lug Clamp - Extended Rng All Stainless Steel Fab Lug Lightweight Clamp UCC Removeable Lug - Standard Range UCC Removeable Lug - Extended Range Tapped Outlet Clamps Collar Leak Clamp... Bell Joint Leak Clamp for PVC Pipe Bell Joint Leak Clamp for CI, DI, C Patch Clamp Full Repair Clamps Heavy Duty Patch Clamp - Single Band Heavy Duty Patch Clamp - Multi-Band Mechanical Joint Repair Sleeve Repair Sleeve for Concrete Steel Cylinder Pipe COUPLINGS 201 Steel Coupling - IPS PVC & Steel Pipe O.D.-CI, DI O.D Long Steel Coupling Steel Transition Coupling Steel Reducing Coupling Ductile Iron Coupling - CI, DI, C-900/905 PVC & A/C Ductile Iron Coupling - IPS PVC & Steel Pipe O.D Ductile Iron Transition Coupling Pipe End Cap Coupling Long Ductile Iron Couplings Restrained Ductile Iron Coupling Galvanized Compression Coupling Series Insulating Adapter Gasket Stiffener Insert for High Density Polyethylene Pipe Standard Length Optimum Coupling Long Length Optimum Coupling Series Transition Gaskets JCM Product Bolt Options FLANGED COUPLING ADAPTERS 301 Cast Iron (Ductile Iron FCA) Steel Fabricated FCA - Special Steel Fabricated Reducing FCA Fabricated FCA Fabricated Reducing FCA Dismantling Joint SERVICE SADDLES Page 401 Single Strap Service Saddle Double Strap Service Saddle Wide Body Service Saddle - SS Strap Service Saddle with Double SS Straps Coated Wide Body Service Saddle - SS Strap Coated Service Saddle with Double SS Straps Coated Single Strap SS - electro-galvanize strap Coated Double Strap SS - electro-galvanized straps Service Saddle for Concrete Steel Cylinder Pipe Stainless Steel Service Saddle...53 TAPPING SLEEVES 411 Fabricated Tapping Sleeve - Plain End Outlet Fabricated Tapping Sleeve - Flanged Outlet Fabricated Tapping Cross Fabricated Mechanical Joint Tapping Sleeve Fabricated Tapping Sleeve - Concrete Steel Cylinder Pipe Weld-On Tapping Sleeve - Outlet Only Weld-On Tapping Sleeve Fabricated Threaded Outlet Tapping Sleeve Fabricated Tapping Sleeve with Mechanical Joint Outlet Fabricated Tapping Sleeve for PVC Pipe Fab Tap Slv for PVC with Mechanical Joint Outlet All Stainless Steel Tapping Sleeve Type 2 All Stainless Tap Slv - Fabricated Lift Bar All Stainless Steel Threaded Outlet Tapping Sleeve Stainless Steel Tapping Slv - Mechanical Joint Outlet Line Stop Fitting All Stainless Steel Tapping Sleeve Outlet Seal Gasket Stainless Steel Tapping Slv - Mechanical Joint Outlet Stainless Steel Tapping Sleeve - Carbon Steel Flange Type 2 Stainless Tap Slv - Fab Lift Bar - Carbon Stl Flg Stainless Steel Tap Slv Outlet Gasket - Carbon Stl Flg Stainless Steel Tap Slv Outlet Gasket - Carbon MJ Outlet Stainless Steel Tap Slv with Carbon Steel MJ Outlet Tapping Sleeves Sized for HDPE RESTRAINERS 00 Sur-Grip Restrainers Restrainers for Asbestos Cement Pipe...9 FABRICATIONS, TOOLS & ACCESSORIES Expansion Joint - Single End Fabricated Tee, Spools & Wall Fittings Series Surge Suppressor Series Master Wrenches - 901, 902, 903, Torque Wrench Hydrant Wrench Deep Well Socket Set Pipe Outside Diameter Tape...1 JCM FITTINGS FOR HDPE JCM Products for Polyethylene...37 Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

6 JCM Selection Guide to Repair Fittings PRODUCT NUMBER & TYPE 1 Universal Clamp Coupling - Standard Range 2 Universal Clamp Coupling - Extended Range 1 Gas Repair Clamp 3 Tapped Universal Clamp Coupling - Standard Range 4 Tapped Universal Clamp Coupling - Extended Range 3 Gas Service Clamp 131 All Stainless Steel Univ. Clamp Coupling - Std. Range 132 All Stainless Steel Univ. Clamp Coupling - Extd. Range 1 All Stainless Gas Repair Clamp 133 All Stainless Tapped Univ. Clamp Cplg. - Standard Range 134 All Stainless Tapped U. C. C. - Extended Range 3 All Stainless Gas Service Clamp APPLICATION, S AND ADDITIONAL INFORMATION Most popular and economical clamp provides a full circumferential seal and wide range. Sizes 1-1/2 -. This multi-band clamp provides a full circumferential seal and offers extended range, heavy duty design and extra safety factor in larger sizes. Sizes 4-0. This popular and economical clamp provides a full circumferential seal permanently repairing cast iron and steel gas service lines. Sizes 2 -. Repair clamps with tapped outlets are recommended for replacement of pulled out corporation stops and in applications where pipe reinforcement is necessary. Taps 3/4-2. All stainless version of the popular single band clamp provides a full circumferential seal and wide range. Sizes 1-1/2 -. This all stainless multi-band clamp provides a full circumferential seal and offers extended range, heavy duty design and extra safety factor in larger sizes. Sizes 4-0. All Stainless Steel construction provides extra corrosion resistance for permanent repair of cast iron and steel gas service lines. Sizes 2 -. All stainless repair clamps with tapped outlets are recommended for replacement of pulled out corporation stops and in applications where pipe reinforcement is necessary. Taps 3/ Collar Leak Clamp 135 All Stainless Collar Leak Clamp This specialty clamp provides a quick, simple means of repairing solvent weld PVC pipe joints. Pressure pipe sizes 2 -. Plastic Irrigation Pipe sizes All Stainless Steel Fabricated Lug Clamp All Stainless Steel Fab Lug Clamp - Multi Band 13 Tapped All Stainless Steel Fabricated Lug Clamp All stainless steel fabricated repair clamp provides full circumferential seal and wide range. All stainless construction is suitable for hot, acidic or corrosive environments. Sizes Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

7 JCM Selection Guide to Repair Fittings 171 Universal Clamp Coupling - Removeable Lug - Standard Range 172 Universal Clamp Coupling - Removeable Lug - Extended Range Universal Clamp Coupling with unique feature of removeable lug to accommodate installations in rockbound soils, narrow piping galleries and other limited space installation applications. Sizes 1-1/2 -. Multi-band clamp provides full circumferential seal and the removeable lug feature. Heavy duty design and extra safety factor in large sizes. Sizes 4-0 Bell Joint Leak Clamp for IPS PVC A bell joint repair clamp specifically for rubber joint IPS size plastic pipe. Clamp also fits solvent weld joints and many standard steel pipe threaded couplings. Sizes Bell Joint Leak Clamps for Cast Iron, Ductile Iron, C-900 PVC. Bell joint clamps for leaking caulk and rubber joints on cast iron, ductile iron and C-900 PVC. Sizes 4-0. Larger sizes available on request. Universal Clamp Coupling for Sewer Pipe 13 All Stainless Steel Univ. Clamp Cplg. for Sewer Pipe 1 All Stainless Steel Fab Lug for Sewer Pipe 1 Patch Clamp 111 Full-Repair Clamp Full circumferential clamp coupling - joins & repairs sewer pipe, single and multi-band. Sizes 4-4. All stainless full circumferential clamp coupling to join and repair sewer pipe. Sizes 4-4. All stainless fabricated lug clamp for sewer pipe. Sizes 4 -. Multi band clamp available. Fast, economical repair clamps to permanently repair pinholes, punctures or splits in steel pipe. Sizes 1/2 -. Fully gasketed repair clamp. Especially recommended for repairs to heavily damaged pipe and pipe with reduced diameter due to corrosion. Steel Sizes 1/ Heavy Duty Patch Clamp - Single Band 113 Heavy Duty Patch Clamp - Multi-Band Heavy duty single band patch clamp for repairing pinholes, punctures or splits. Sizes 1-1/2 -. Heavy duty multi-band clamp offers increased performance and range in repairing pinholes, punctures and splits. Sizes and larger. 114 Mechanical Joint Repair Sleeve A special repair sleeve for sealing over split or leaking cast iron bells, A/C couplings and welded couplings and straight runs of pipe. Sizes 4 and larger. 11 Repair Sleeve for Concrete Steel Cylinder Pipe A high pressure, reinforcing repair sleeve for repairing holes, punctures and splits in concrete steel cylinder pipe. Especially recommended for heavily damaged and larger sizes of pipe. Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice. 3

8 Image reflects width JCM 1 Universal Clamp Couplings JCM 171 Universal Clamp Couplings JCM 1 Standard Range Universal Clamp Coupling - provides a full circumferential seal and wide range for permanently repairing or reconnecting asbestos-cement, cast iron, steel, plastic and other types of pipe. JCM 171 Removeable Lug Universal Clamp Coupling - provides a removeable lug system to accommodate rockbound soils, crowded underground utilities, restricted, narrow spaced piping galleries and limited excavation applications. Image reflects width Nom. Pipe Size Clamp O.D. Range 1 Attached 171 Removeable Lug Clamp Width - Approximate Weight Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# 1-1/ $ # 14# 2-2-1/ # 9# # 19# # # 1# 20# # 11# 1# 22# 27# 3# 44# # # 19# 24# 29# 3# 4# # 13# 21# 27# 32# 42# 53# , # 3# 39# 52# 70# 7# , # 37# 40# 52# 74# 2# Number of Bolts HOW TO ORDER 1. Determine O.D. of pipe. 2. Select proper clamp O.D. range and width. 3. Determine Model Number. Model 1 for standard clamp, 171 for Removeable lug system. 4. Specify clamp number. Example: To fit Cast Iron pipe,.90 O.D. with width, order: or Clamps do not prevent lateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided. Available Options Upon Request Models Pipe sizes and ranges not listed Stainless Steel Bolts Conductive Buttons Specialty Gaskets Tapped clamps, see page 14 4 Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

9 JCM 2 Extended Range Universal Clamp Couplings JCM 172 Removeable Lug Extended Range UCC JCM 2 Extended Range UCC - for systems with asbestos-cement and cast iron pipe or oversize pipe. JCM 172 Removeable Lug System Extd. Range UCC - Removeable lug system accommodates rockbound soils, crowded underground utilities, restricted, narrow spaced piping galleries and limited excavation applications. Double Band Clamps Nom. Pipe Size 4 Clamp O.D. Range Attached Lug 172 Removeable Lug Clamp Width - Approximate Weight Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Image reflects width $ # 20# 32# 40# 4# 4# 0# # 20# 32# 40# 4# 4# 0# ,5.0 17# 21# 34# 43# 51# # 5# , , # 52# 74# 0# , , # 0# # 132# , , , # 7# # 145# , , , # 9# # 14# , ,03.0 2, # 95# 4# # ,5.50 2, , # 95# # # , , , # 0# 134# 1# Multi-Band Clamps Number of Bolts , , , , # 140# 1# 233# - - 1, , , , # 147# 19# 245# ,.50-3, ,545., # 175# 234# 292# HOW TO ORDER 1. Determine O.D. of pipe. 2. Select proper clamp O.D. range and band width. 3. Determine Model Number. 4. Specify clamp number. Model 2 or 172 (Removeable Lug). Example: To fit Cast Iron pipe,.90 O.D. with width, order: or Clamps do not prevent lateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided. Available Options Upon Request Models Pipe sizes and ranges not listed Stainless Steel Bolts Conductive Buttons Specialty Gaskets Tapped clamps, see page 14 Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice. 5

10 JCM 131 All Stainless Steel Universal Clamp Couplings JCM 131 All Stainless Steel Clamp Coupling with larger bolts and heavier lug - especially for piping systems that are exposed to hot soils or corrosive environments. JCM All Stainless Clamps provide the corrosion resistance of stainless to this means of repairing and connecting pipe. Image reflects width Nom. Pipe Size Clamp O.D. Range 131 Stainless Steel Universal Clamp 1-1/ Clamp Width - Approximate Weight Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# $ # # 2-2-1/ # # # # # 7# 11# 13# # 7# # 14# 1# 24# 2# , # # 13# 1# 21# 2# 31# ,7. # 9# # 19# 24# 30# 3# ,23.0 1,49.0 # 2# 31# 39# 42# 0# ,02.0 1, , # 2# 34# 42# 5# # Number of Bolts HOW TO ORDER 1. Determine O.D. of pipe. 2. Select proper clamp O.D. range and band width. 3. Determine Model Number. 4. Specify clamp number. Example: To fit Cast Iron pipe,.90 O.D. with width, order: Clamps do not prevent lateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided. Available Options Upon Request Models Pipe sizes and ranges not listed Conductive Buttons Specialty Gaskets Tapped clamps, see page 14 Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

11 JCM 132 All Stainless Steel Extended Range Universal Clamp Couplings JCM 132 All Stainless Steel Extd. Range Clamp Coupling - for systems in hot soils or corrosive environments. Provides extra corrosion resistance of all stainless steel. Double Band Clamps Image reflects width Nom. Pipe Size 4 Clamp O.D. Range Stainless Steel Extended Range Clamp Width - Approximate Weight Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# $ ,4.70 1, # 11# 1# 20# 25# 32# 44# , ,530.0 # # 19# 2# 30# 3# 55# , ,3.20 1, # 13# 20# 29# 33# 40# 55# ,3.70 1,22.0 2, # 4# 4# 0# , , , # 51# # 5# - - 1, , ,3.20 3, # 54# 72# 9# , , ,0.30 4, # 5# 74# 92# , , ,9.0 4, # 59# 7# 97# ,47.0-2, , , # 2# 2# 3# , , , , # 7# 90# 111# Multi-Band Clamps Number of Bolts , , ,3.40 7,1.0 59# # # 14# - - 2,44.0-4, , , # 95# # # , ,11.40,31.70,1.20 2# 3# 14# 205# HOW TO ORDER 1. Determine O.D. of pipe. 2. Select proper clamp O.D. range and band width. 3. Determine Model Number. 4. Specify clamp number. Model 2 or 172. Example: To fit Cast Iron pipe,.90 O.D. with width, order: Clamps do not prevent lateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided. Available Options Upon Request Models Pipe sizes and ranges not listed Conductive Buttons Specialty Gaskets Tapped clamps, see page 14 Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice. 7

12 JCM 11 Fabricated Lug Stainless Steel Universal Clamps The JCM 11 Fabricated Lug All Stainless Steel Clamp offers an economical solution to problems such as breaks, splits, cracks, holes in all types of pipe. Available in standard sizes, the 11 is a stainless steel clamp that offers all the benefits of stainless: corrosion resistance, lightweight, flexible yet strong. Nom. Pipe Size 2-2-1/2 Clamp O.D. Range Stainless Steel Universal Clamp Clamp Width - Approximate Weight Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# $ # # # Image reflects 7 width # 9# 11# # # # 17# 20# 24# # 13# 17# 20# 2# 34# # 1# 21# 25# 32# 44# ,023.0 # 1# 24# 30# 3# 50# , # 20# 27# 34# 40# 5# Number of Bolts HOW TO ORDER 1. Determine O.D. of pipe. 2. Select proper clamp O.D. range and band width. 3. Determine Model Number. 4. Specify clamp number. Example: To fit Cast Iron pipe,.90 O.D. with 7 width, order: Clamp width should be equal to or greater than the pipe diameter for higher working pressures. Contact JCM Industries for recommendations. 2. Not recommended for use for joining plain end pressure pipe. 3. Other ranges and widths available upon request. 4. Clamps do not prevent lateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided. Available Options Upon Request Models 11- Pipe sizes and ranges not listed Conductive Buttons Specialty Gaskets Tapped clamps, see page 14 Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

13 JCM Fabricated Lug All Stainless Steel Extended Range Clamps JCM All Stainless Steel Extended Range Clamps - for piping systems that are exposed to hot soils or corrosive environments. Provides extra corrosion resistance of stainless steel to this means of repair and connecting pipe. Image reflects width DOUBLE BAND CLAMPS Nom. Pipe Size 4 Clamp O.D. Range Stainless Steel Extended Range HOW TO ORDER 1. Determine O.D. of pipe. 2. Select proper clamp O.D. range and band width. 3. Determine Model Number. 4. Specify clamp number. Example: To fit Cast Iron pipe,.90 O.D. with 7 width,order: Clamp width should be equal to or greater than the pipe diameter for higher working pressures. Contact JCM Industries for recommendations. 2. Not recommended for use for joining plain end pressure pipe. 3. Other ranges and widths available upon request. 4. Clamps do not prevent lateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided. Clamp Width - Approximate Weight Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# $ # 13# 1# 25# 27# 34# # 14# 19# 2# 30# 40# , # 19# 23# 3# 41# 45# , , # 32# 43# 5# 4# , ,2.0 1,72. 30# 40# 52# 0# 0# , , , , # 43# 55# 79# # - 1,0.30 1, , , , # 4# 59# 7# 92# - 1, , , , , # 49# 1# 90# 9# - 1, , , , , # 52# 3# 94# 1# - 1, ,52. 2, ,3.40 3, # 59# 7# 99# # Number of Bolts 4 1 Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice. 9

14 JCM 1 Gas Repair Clamps This popular and economical clamp provides a full circumferential seal which permanently repairs cast iron and steel gas service lines. This clamp features positive attachment of the stainless band to the lugs, drop-in-bolts and a heavy 1/4 gridded gasket. JCM 1 Gas Repair Clamps meet the Department of Transportation Code 192. Image reflects width Nom. Pipe Size Clamp O.D. Range 1 Gas Repair Clamp Clamp Width - Approximate Weight Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# 2-2-1/ $ # 9# # 19# # # 1# 20# # 11# 1# 22# 2# 3# 44# # # 19# 24# 29# 3# 4# # 21# 27# 32# 42# 53# ,5.20 1# 34# 3# 50# # 72# , , # 37# 40# 52# 74# 0# Material Specifications: Band: 1- Type 304 Certifiable Prime Stainless Steel per ASTM A240 as applicable. Lugs: Ductile Iron ASTM A53, Bolts: Corrosion resistant low alloy per ASTM A242, ANSI/AWWA C111/A National coarse rolled thread and heavy hex nut. Optional Stainless Steel 1- Type 304 or 31 available. Optional Epoxy Coated low alloy bolts/nuts available. Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber for natural gas, oil, mild acids, bases, water and sewage. Gasket temperature range -40 o F to 10 o F (-40 o C 2 o C). For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services. Coating: Corrosion resistant shop coat paint primer. Pressure Rating of 1 & 3 Gas Clamps: Cast Iron Pipe: 2 through 0 PSI Gas through 0 PSI Gas Steel Pipe: 2 through 0 PSI Gas through 0 PSI Gas Number of Bolts Do Not use for the repair of Polyethylene Gas Pipe. Suitable for reshaping and marking squeeze off locations. Clamps do not prevent lateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided. Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

15 JCM 1 All Stainless Steel Gas Repair Clamps All stainless steel construction provides extra corrosion resistance for permanent repair of piping systems which are exposed to hot soils or corrosive environments. JCM 1 Gas Repair Clamps meet the Department of Transportation Code 192. Image reflects width Nom. Pipe Size Clamp O.D. Range 1 All Stainless Gas Repair Clamp Clamp Width - Approximate Weight Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# 2-2-1/ $ # # # # # 7# 11# 13# ,030. # 7# # 14# 1# 24# 2# ,3.00 7# # 13# 1# 21# 2# 31# , # # 19# 24# 30# 3# ,093. 1, , # 24# 2v# 3# 4# 5# , , ,7.00 1# 27# 33# 41# 54# # Material Specifications: Lug: Cast Stainless Steel CF equal to 1- Type 304 Band: Stainless Steel, 1- Type 304 per ASTM A240 as applicable Bolts: Stainless Steel, 1- Type 304 Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber for natural gas, oil, mild acids, bases, water and sewage. Gasket temperature range -40 o F to 10 o F (-40 o C 2 o C). For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services. Pressure Rating of 1 & 3 Gas Clamps: Cast Iron Pipe: 2 through 0 PSI Gas through 0 PSI Gas Steel Pipe: 2 through 0 PSI Gas through 0 PSI Gas Number of Bolts Do Not use for the repair of Polyethylene Gas Pipe. Suitable for reshaping and marking squeeze off locations. Clamps do not prevent lateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided. Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice. 11

16 JCM 1 Fabricated Lug Lightweight Stainless Steel Clamps The JCM 1 Fabricated Lug All Stainless Steel Clamp offers an economical solution for applications on sewer systems. Suitable for joining plain end pipe in slip lining applications. Recommended for gravity flow, low pressure sewer applications. For pressure applications, see JCM 11 Fabricated Lug Stainless Steel Clamp. Image reflects 7 width Nom. Pipe Size Clamp O.D. Range 1 Stainless Steel Universal Clamp Clamp Width - Approximate Weight Clamp Number Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# Lbs.# $ # # # 17# 20# 24# # 13# 17# 20# 2# 34# # 1# 21# 25# 32# 44# # 1# 24# 30# 3# 50# , # 20# 27# 34# 40# 5# Number of Bolts Conductive Buttons for electrical thawing available upon request for all models. HOW TO ORDER 1. Determine O.D. of pipe. 2. Select proper clamp O.D. range and band width. 3. Determine Model Number. 4. Specify clamp number. Example: To fit Cast Iron pipe,.90 O.D. with 7 width, order: Clamp width should be equal to or greater than the pipe diameter for higher working pressures. Contact JCM Industries for recommendations. 2. Not recommended for use for joining plain end pressure pipe. 3. Other ranges and widths available upon request. 4. Clamps do not prevent lateral movement of pipe. Applications in which the pipe may move out of the clamp, proper anchorage of the pipe must be provided. Available in double band, JCM Model 19. Price On Application, Contact JCM Inside Sales Team. Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

17 JCM Universal Clamp Coupling for Sewer Pipe For quick, economical, permanent connection of sewer pipe, straight connections of the same type of pipe, or transition from one type of pipe to another. The JCM Universal clamp coupling for sewer pipe is designed to connect and repair all types of gravity flow sewer pipe. Each clamp coupling has a wide range of sizes to accommodate the manufacturing tolerances of this type of pipe. This assures a simple and proper installation even under the most adverse field conditions. JCM Universal clamp couplings are furnished standard to join pipe of the same outside diameter. Transition gasket material is furnished with the clamp coupling when a transition is indicated. JCM UCC for Sewer Pipe is Priced on Application. For quotation, contact the JCM Inside Sales Team at or Universal Clamp Couplings for Sewer Pipe Straight Clamp Coupling For repair or connection of similar O.D. pipe. Transition Clamp Coupling For repairing or connecting pipe of different O.D.s. 13 All Stainless Clamp Coupling For use in hot or acidic soil conditions. Available in straight & transition styles. How To Order And Submit For Quote 1. Determine type of pipe and outside diameters of each end to be joined. 2. Determine and advise of any special factors involved - such as pressure sewer line or unusual line content. 3. Order Universal Clamp Coupling as follows: A. For repairing or joining pipe with same O.D. refer to JCM 1, 2 Universal Clamp Couplings and order clamp to fit O.D. of pipe. B. Joining ends with different O.D. s, provide O.D. s and type of pipe to JCM Inside Sales Team. JCM Universal Clamp Couplings for sewer pipe are fabricated to fit these types of pipe: SDR35 PVC Sewer Pipe Clay Pipe Cast Iron Soil Pipe Asbestos Cement C-900 PVC, IPS PVC Material Specifications: Lugs: Model - Ductile Iron per ASTM A53 Model 13 - CF Cast stainless steel, equal to 304 stainless. Band: Stainless Steel 1- Type 304 per ASTM A240 as applicable. Gasket: Bolts & Nuts: Compounded for use with sewage, water, salt solutions, mild acids, and bases. Model - Corrosion resistant, high strength low alloy A242 (ANSI/AWWA C111/A21.11); Model 13 - Stainless steel, 1- Type 304 Transition Gasket Material (Ra-Seal): Pliable butyl rubber sealant for temperature range -5 o to 10 o F. Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice. 13

18 JCM Tapped Outlet Repair Clamps - 3, 4, 173, 174, 133, 134, 3, 3, 13, 14 All Models of JCM Universal Clamp Couplings are available with tapped outlets for repair of direct tap pull outs and broken or split pipe requiring a service outlet. How To Order 1. Select standard model, size and width clamp to fit pipe. 2. Change model number to corresponding Tapped Outlet Clamp Model Number. 3. Select size and type of tapped outlet from outlet guide below. Note minimum widths and range/ sizes. 4. Add Outlet Tap Code to clamp number. Add-On outlet price to standard clamp list price. Ordering Example: For standard clamp to fit Cast Iron Pipe with width, with 2 IP outlet, order: x 14IP Standard Clamp Model Becomes Tapped Outlet Clamp Model 1 Universal Clamp Coupling - Standard Range 2 Universal Clamp Coupling - Extended Range 131 All Stainless Steel UCC - Std Range 132 All Stainless Steel UCC - Extd Range 1 Gas Repair Clamp 1 Gas Repair Clamp 11 All Stainless Steel Fabricated Lug Clamp All Stainless Steel Fabricated Lug Clamp - Ext Range 171 UCC - Standard Range - Removeable Lug 172 UCC - Extended Range - Removeable Lug 3 Tapped Universal Clamp Coupling - Standard Range 4 Tapped Universal Clamp Coupling - Extended Range 133 Tapped All Stainless Steel UCC - Std Range 134 Tapped All Stainless Steel UCC - Extd Range 3 Tapped Gas Service Clamp 3 Tapped All Stainless Steel Gas Service Clamp 13 All Stainless Steel Tapped Fabricated Lug Clamp 14 All Stainless Steel Tapped Fabricated Lug Clamp - Ext Range 173 Tapped UCC - Standard Range - Removeable Lug 174 Tapped UCC - Standard Range - Removeable Lug CLAMP RANGE/ MINIMUM CLAMP LENGTH TYPE OF THREAD IP or CC TAP ADD OUTLET TAP CODE IP ORDER TAP CODE CC ORDER TAP CODE 3/ ADD-ON TO STANDARD CLAMP LIST PRICE $ /2 IP or CC 3/ IP or CC 1-1/ IP or CC 1-1/ IP CC JCM JCM JCM Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

19 JCM 5 Collar Leak Clamps JCM 135 All Stainless Steel Collar Leak Clamps For Quick, Permanent repairs of solvent weld PVC pipe joints. JCM 5/135 Collar Leak Clamps provide a simple, quick solution to troublesome leaks in PVC solvent weld pipe systems - without having to cut out fittings or modifying your system. These heavy duty clamps have many features which assure a successful repair, even under the most adverse conditions. How To Order 1. Determine O.D. of pipe. 2. Select proper clamp O.D. range and band width. 3. Specify clamp number. For standard clamp, order model 5. For all stainless clamp, order model number to 135. EXAMPLE: For 3 Class 10 PVC pipe, order: For All Stainless Clamp, order: NOM. O.D. TYPE OF SOLVENT WELD JOINT Clamp Width* CLAMP NUMBER STANDARD CLAMP (MODEL 5) APPR WT. (LBS.) ALL STAINLESS CLAMP (MODEL 135) APPR WT. (LBS.) BELL END CLASS 10, 200 SCH 40 COUPLING AND BELL END $ $ /2 2. BELL END CLASS 10, 200 SCH 40 COUPLING AND BELL END BELL END CLASS 10, 200 SCH 40 COUPLING AND BELL END BELL END CLASS 10, 200 SCH 40 COUPLING AND BELL END BELL END CLASS 10, 200 SCH 40 COUPLING AND BELL END BELL END CLASS 10, 200 SCH 40 COUPLING AND BELLEND BELL END CLASS 10, 200 SCH 40 COUPLING AND BELL END *OTHER WIDTHS AVAILABLE UPON REQUEST 5 COLLAR LEAK CLAMP FOR PLASTIC IRRIGATION NOMINAL O.D. CLAMP WIDTH * FOR WALL THICKNESS CLAMP NUMBER PRICE APPR. WT. EA. (LBS.) $ *OTHER WIDTHS AVAILABLE UPON REQUEST Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

20 JCM Bell Joint Leak Clamp For quick repair or water tight joint assurance for rubber joint PVC pipe, solvent weld pipe or coupled pipe specify JCM Bell Joint Leak Clamps. These clamps are engineered to provide a simple, dependable repair or assured joint. In addition, the JCM eliminates possible notching of PVC pipe and offers maximum versatility and corrosion resistance. For Repair of: PVC Rubber Joint Bells - Std. Steel Sizes (SDR 2, SDR 21) PVC Solvent Weld Joints and Couplings Std. Steel Threaded Couplings. BELL JOINT LEAK CLAMP NOM. O.D. MAXIMUM BELL O.D. MAXIMUM LIP O.D. OVERALL LENGTH* MAX. STD. CPLG. LENGTH CATALOG NUMBER PRICE / $ / / *Dimension will change with use of studs. APPR. WT. (LBS.) JCM 143 Bell Joint Leak Clamp Pipe Sizes 4 - Cast Iron Pipe, Ductile Iron Pipe, C-900 PVC Strong - Split, interlocking rings provide a solid base for maximum gasket compression. Heavy duty ductile iron components for the life of the pipeline. Eliminates Extra Parts and Time Loss - Each clamp comes complete to repair cast iron, ductile iron and C-900 PVC in its nominal size without any special order bolts, gaskets or other parts. Simple transfer from shelf to job site to pipe joint without confusion. Simple, Fast Installation - Split-rings interlock around pipe and pre-cut gasket eliminates field cutting. Install Under Pressure - Install under pressure to repair leaking joint or install as a leak preventative on older pipe joints that have been excavated or disturbed during other pipeline maintenance (a low-cost, long-term insurance policy). Pipe Sizes 14 and Larger for Ductile Iron/Cast Iron Pipe Fabricated Bell Joint Leak Clamps with split, bolt-on designed provides a positive seal for large diameter Ductile Iron and Cast Iron leaking bells. Designed for long-term service and immediate delivery. JCM NOMINAL CLAMP O.D. RANGE CATALOG NUMBER PRICE APPR. WT. (LBS.) $ , , , , , , , JCM Larger sizes available JCM 143 Bell Joint Leak Clamp 14 and Larger - Fabricated Steel Sizes 14 and larger based on working ranges of industry standard pipe tolerances +/- To ensure exact fit when ordering provide specific bell/spigot outside diameters. Larger Sizes Available, Contact JCM Sales Team or Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

21 JCM 1 Patch Clamps How To Order 1. Determine clamp size, material options and width required. 2. Order by clamp number. For Stainless Steel Bolt(s) add (SS) to clamp number. For ALL Stainless Steel Clamp add (AS) to clamp number. Example: All Stainless Steel Clamp for 4 IPS PVC with 4.50 O.D. 3 with, order AS. NOMINAL O.D. CLAMP NUMBER WIDTH PRICE E-GALV. BOLT 1/ $ / / / / DOUBLE BAND CLAMPS FOR STEEL S COPPER TUBE S 1/ / / / $ PRICE SS BOLT Add (SS) $ $ PRICE ALL STAINLESS Add (AS) $ $ WT. EA. LBS CTN. QTY Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice. 17

22 JCM 111 Full-Repair Clamps JCM 111 Full-Repair clamps are a fast economical means of permanently repairing steel pipe with extensive corrosion, splits, punctures or pin holes. These clamps have a heavy, full circumferential Buna-N gasket with a hardened recessed armor. This provides extra sealing capability for heavily damaged pipe and pipe with reduced diameter due to corrosion. JCM 111 FULL-REPAIR CLAMPS Steel Pipe Sizes - IPS Copper Tubes Sizes - CTS NOMINAL O. D. TYPE OF WIDTH CLAMP NUMBER PRICE E-GALV. BOLT PRICE STAINLESS BOLT Add (SS) PRICE ALL STAINLESS Add (AS) WT. EA. (LBS.) CTN. QTY. 1/2 0.4 IPS $ $ $ / IPS 0. CTS IPS 1.13 CTS /4 1. IPS /2 1.3 CTS 1.90 IPS IPS How to Order 1. Determine clamp size, material options and width required. 2. Order by clamp number. For Stainless Steel Bolt(s) add (SS) to clamp number. For ALL Stainless Steel Clamp add (AS) to clamp number. Example: All Stainless Steel Clamp for 2 IPS PVC with 2.3 O.D. 3 with, order AS Material Specifications JCM 1 PATCH CLAMPS and JCM 111 FULL-REPAIR CLAMPS JCM 1 PATCH CLAMP Lug: Ductile Iron ASTM A53. Optional CF Stainless Steel, equal to 304. Gasket: Rubber gasket suitable for gas. Band: Stainless Steel 1- Type 304 Hardware: Electro-galvanized Steel. Stainless Steel available. JCM 111 FULL-REPAIR CLAMP Lug: Ductile Iron ASTM A53.Optional CF Stainless Steel, equal to 304. Gasket: Buna-N Band: Stainless Steel 1- Type 304 Hardware: Electro-galvanized Steel. Stainless Steel available. 1 Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

23 JCM 1 Heavy Duty Patch Clamp JCM 113 Multi-Band Patch Clamp Heavy Duty Patch Clamps provide fast, permanent repair of pin holes, punctures or splits in steel and other types of pipe where a beam break is not involved. The clamps are readily available for all sizes of pipe 1-1/2 and larger. Material Specifications: Lug: Ductile Iron ASTM A53. Optional Stainless Steel. Band: Stainless Steel, 1- Type 304 per ASTM A240 as applicable Gasket: Gridded gasket is compounded for use with water, salt solutions, mild acids and bases. Other gaskets available upon request. Hardware: Corrosion resistant, high strength low alloy A242, ANSI/AWWA C111/A21.11). Optional Stainless Steel, 1- Type 304 available. How To Order 1. Determine pipe size. 2. Select proper clamp and width. 3. Specify clamp number. EXAMPLE: For steel pipe with width, order: For optional stainless steel bolts, add (SS) to end of part number: (SS) JCM 1 and 113 Heavy Duty Patch Clamps are Priced on Application. For quotation, contact the JCM Inside Sales Team at or HEAVY DUTY PATCH CLAMP 113 MULTI-BAND PATCH CLAMP NOM. CLAMP O.D. RANGE 1-1/ / / CLAMP NUMBER WIDTH WT. EA. LB NOM. CLAMP O.D. RANGE CLAMP NUMBER WIDTH WT. EA. LB LARGER OR OTHER S AVAILABLE UPON REQUEST. FOR COMPLETE BREAKS USE JCM UNIVERSAL CLAMP COUPLINGS MODELS 1, 2 Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice. 19

24 JCM 114 Mechanical Joint Split Repair Sleeve JCM 114 Mechanical Joint Bell Repair Sleeve The JCM 114 MJ Split Repair Sleeve represents an unusually simple method of coupling or repairing straight runs of cracked or split cast iron pipe and severe longitudinal and circumferential breaks on critical service lines which can not be shut down. This product is made to order for all types and sizes of pipe. The JCM 114 MJ Bell Repair Sleeve is designed to permanently repair cracked cast iron bells, split or leaking couplings and leaking joints. By utilizing a split mechanical joint design, repairs to joints can be completed without down time or disruption to service. The JCM 114 is built to the application dimensions, ensuring a custom fit over the damaged area. These sleeves are ideal for installation where strength, weight and continued service are critical. How To Order JCM 114 Mechanical Joint Split Repair Sleeve The following information must be furnished. Type of Pipe Pipe Outside Diameter Length Requirements Line Content Line Pressure Finish or Coating Requirements JCM 114 Mechanical Joint Bell Repair Sleeve The following information must be furnished. Type of Pipe Spigot or Pipe Outside Diameter Largest Bell or Coupling Dimension Length Requirements Line Content Line Pressure Finish or Coating Requirements JCM 114 Mechanical Joint Repair Sleeves meet or exceed AWWA C1/111, ANSI A21./21.11 as applicable. Material Specifications: Body: Pusher Glands: Bolts: Gasket: Finish: ASTM A3 Steel, ASTM A25 Grade C Steel or equal. Optional stainless steel available. ASTM A3 Steel or ASTM A53 Ductile Iron. Optional stainless steel available. Corrosion resistant, high strength low alloy A242, ANSI/AWWA C111/A21.11 Nitrile rubber compounded for use with water, salt solutions, mild acids and bases. Heavy coat of corrosion resistant shop coat primer. Optional fusion epoxy coating per ANSI/AWWA C213. JCM 114 Mechanical Joint Repair Sleeve is available fabricated of all 304 or 31 stainless steel. JCM 114 Mechanical Joint Repair Sleeves are Priced on Application. For quotation, contact the JCM Inside Sales Team at or Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

25 JCM 11 Repair Sleeve for Concrete Steel Cylinder Pipe The JCM 11 Repair Sleeve for Concrete Steel Cylinder Pipe provides a quick easy means of repairing and reinforcing damaged concrete steel cylinder pipe of all sizes. This repair sleeve permits repairs to be made on any side of the pipe - without requiring complete stripping of the concrete. The standard repair gasket seals around a damaged area. Larger repair sizes are available. This sleeve is especially recommended for larger sizes of pipe and where the concrete and pipe require reinforcement. Minimal Pipe Excavation - JCM 11 Repair Sleeve requires limited pipe exposure around the damaged area. Full section joint exposure is eliminated. Wide Supportive Body - reinforces pipe which is weakened due to structural interruption. The body s grout seal assembly provides a system for replacement of the critical corrosion retarding concrete encasement. By restoring the concrete casing, the steel cylinder is protected from corrosive elements. Eliminates Excessive Concrete Coating Removal - concrete removal is limited to the damaged area only, preventing further pipe structural damage Epoxy Coated Repair Plate - the internal repair plate is fusion epoxy coated to provide a quality repair protected against corrosion in the pipe interior. Eliminates Welding On Thin Cylinders - JCM 11 directly repairs the damaged cylinder making a watertight seal, preventing the line contents from infiltrating the concrete-steel interface. Availability - The JCM 11 Repair Sleeve for Concrete Steel Cylinder Pipe is available from JCM on both an emergency and a contingency basis. Timely delivery and installation prevents extensive pipe damage, content loss and environmental violations. JCM 11 Repair Sleeves for Concrete Steel Cylinder Pipe are Priced on Application. For quotation, contact the JCM Inside Sales Team at or How To Order For pricing and engineering, the following information must be furnished: Type of pipe (also manufacturer and class if known) Diameter of damaged area Outside Diameter of Concrete and Cylinder Line Content and Pressure Any special requirements or options Material Specifications: Body: ASTM A25 Grade C or ASTM A3 Steel Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydro mechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temperature range -40 o F to 2 o F (-40 o C - 0 o C) Gasket suitable for water, salt solutions, mild acids, bases, and sewage. Bolts: Corrosion resistant, high strength low alloy (ANSI/AWWA C111/A Optional stainless steel, 1- Type 304. Finish: Heavy coat of corrosion resistant primer on sleeve, gland and straps. Waterway of gland is epoxy coated (fusion applied per ANSI/AWWA C213). Optional fusion epoxy coating on entire sleeve. JCM 11 Repair Sleeve for Large Diameter Pipe - Cast Iron, Ductile Iron, Steel The JCM 11 Repair Sleeve is also recommended for repairs on large diameter pipe including cast iron, ductile iron, steel, and other types of rigid pipe. The direct concentration of bolting pressure to the repair gland area enables the 11 to repair the damaged area while maintaining the pipeline s pressure capability. Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice. 21

26 Material Specifications for JCM Universal Clamp Couplings Models 1-2, , 5, Ductile Iron Lug - Stainless Band Band: 1- Type 304 Certifiable Prime Stainless Steel per ASTM A240 as applicable Lugs: Ductile Iron ASTM A53, Bolts: Corrosion resistant low alloy per ASTM A242, ANSI/AWWA C111/A National coarse rolled thread and heavy hex nut. Optional Stainless Steel 1- Type 304 or 31 available. Optional Epoxy Coated low alloy bolts/nuts available. Gasket: Virgin Styrene-Butadiene Rubber (SBR) - Compounded for use with water, salt solutions, mild acids and bases. Per ASTM D Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services. Coating: Corrosion resistant shop coat paint primer. Models 3-4, Tapped Outlet: 1- Type 304 Stainless Steel Models , 135, 13 All Stainless Steel Band: Certifiable 1- Type 304 Stainless Steel per ASTM A240 as applicable. Optional 31 Stainless Steel available. Lugs: CF- Cast Stainless Steel (equivalent to 304 Stainless Steel). Optional 31 Stainless Steel available. Bolts: 1- Type 304 Stainless Steel with coated nuts. Optional 31 Stainless Steel available. Gasket: Virgin Styrene-Butadiene Rubber (SBR) - Compounded for use with water, salt solutions, mild acids and bases. Per ASTM D Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services. Models Tapped Outlet: 1- Type 304 Stainless Steel Models 11 -, 1-19 All Stainless Steel Fabricated Lug Lug Assembly: 1- Type 304 Stainless Steel Band: 1- Type 304 Stainless Steel per ASTM A240 as applicable Bolts: 1- Type 304 Stainless Steel with coated nuts. Gasket: Virgin Styrene-Butadiene Rubber (SBR) - Compounded for use with water, salt solutions, mild acids and bases. Per ASTM D Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services. Models Tapped Outlet: 1- Type 304 Stainless Steel Conductive Buttons are available for all models of JCM Clamps. For optional materials, specialty application criteria, and other product specific information, contact JCM Industries Sales Team at or , sales@jcmindustries.com. 22 Price List Effective September 1, Cancels all previous prices. Prices subject to change without notice.

27 JCM Selection Guide to Couplings PRODUCT NUMBER & TYPE APPLICATION, S AND ADDITIONAL INFORMATION 201 Steel Couplings 202 Long Sleeve Steel Coupling Steel couplings for joining steel, galvanized, PVC and other pipe with standard steel dimensions 1/2-24. Available for cast iron and other pipe in sizes 14 and larger. Provides longer length for longer space between pipe ends. Especially good for repairing PVC pipe. Sizes 2 -. Larger sizes on request. 203 Steel Transition Coupling For connection of oversize to standard size pipe within the same nominal pipe size. Special ranges available. 204 Steel Reducing Coupling 2 Ductile Iron Coupling For connection of any combination of two sizes or types of pipe either to increase or decrease sizes. The standard wide range coupling for joining Cast Iron, Ductile Iron, A-C, C-900/C-905 PVC and other types of pipe. Sizes Ductile Iron Coupling 2 Ductile Iron Transition Coupling Sized for steel and IPS PVC this ductile iron coupling offers more deflection capability and corrosion resistance than steel couplings. Sizes Utilizes special transition gaskets in standard ductile iron couplings to join pipe of the same nominal size but different outside diameters. Sizes 2-1/4 - & Pipe End Cap Coupling Provides a simple means of capping all types of plain end pipe. Also used for line testing, air release and reducing line for service extensions. Sizes 3 -. Larger sizes on request. 2 Long Ductile Iron Coupling Extra long coupling provides a wide range, accommodates wide gaps between pipe ends, reduces inventory and fits both cast iron and A/C Class 0 pipe in the popular 4, and sizes. Utilizes the JCM original transition gasket system. Larger sizes upon request. 219 Restrained Ductile Iron Coupling Simplifies piping installations requiring couplings and tie rods or other types of restraint. Provides an easy joint makeup with restraint in a minimum amount of space. Sizes Standard Length Optimum Range Coupling 242 Long Length Optimum Range Coupling Optimum range coupling accommodates all types of pipe within the same nominal size. No change of gasket, end rings or bolts. Can be installed without complete disassembly. Sizes

28 JCM 201 Steel Couplings for Steel Pipe Sizes JCM 201 Steel Couplings provide an easy means of joining plain end pipe. These couplings are especially applicable for use on steel, galvanized, PVC and other pipe with standard steel dimensions. 201 STEEL COUPLINGS FOR STEEL S NOMINAL O.D. RANGE SLEEVE LENGTH & THICKNESS NO. OF BOLTS CATALOG NUMBER CARTON QUANTITY PRICE (E) EPOXY COAT ADD TO LIST (SS) STAINLESS STEEL 304 HARDWARE ADD TO LIST 1/2.4.7 x 3-1/ $ 37.0 $ 22.0 $ / x x /2 1-1/ x / x / x x / x x x x x /4 x /4 x /4 x /4 x /4 x /4 x /1 x /4 x /1 x / x / x / x / x ,12.20 P. O. A. P. O. A / x ,499.0 P. O. A. P. O. A / x ,31.0 P. O. A. P. O. A / x P. O. A. P. O. A. P. O. A / x P. O. A. P. O. A. P. O. A /2 x P. O. A. P. O. A. P. O. A /2 x P. O. A. P. O. A. P. O. A /2 x P. O. A. P. O. A. P. O. A. 375 Note: Applications in which pipe may move out of the coupling, proper anchorage of the pipe must be provided. APPR. WT. LBS. Available options for JCM 201 Steel Couplings: E-Coated Bolts and Nuts - P.O.A., contact JCM Inside Sales Team EPDM Gaskets 24

29 JCM 201 Steel Couplings 14 and Larger 201 STEEL COUPLINGS 14 AND LARGER NOM. O.D. RANGE SLEEVE LENGTH & THICKNESS NO. OF BOLTS CATALOG NUMBER PRICE (E) EPOXY COAT ADD TO LIST (SS) STAINLESS STEEL 304 HARDWARE ADD TO LIST / X $ 79.0 $ 37.0 $ / X / X / X / X / X / X / X / X ,23.30 P.O.A. P.O.A / X , P.O.A. P.O.A / X , P.O.A. P.O.A / X , P.O.A. P.O.A / X P.O.A. P.O.A. P.O.A /2 X , P.O.A. P.O.A /2 X ,730.0 P.O.A. P.O.A /2 X ,133. P.O.A. P.O.A /2 X P.O.A. P.O.A. P.O.A. 375 Other Sizes Available Upon Request *For Sizes 2 through See JCM 2 Ductile Iron Couplings Note: Applications in which pipe may move out of the coupling, proper anchorage of the pipe must be provided. APPR. WT. EA. (LBS.) Material Specifications: Sizes 1/2 through 2" MIDDLE RING: Steel per ASTM A3 FOLLOWERS: Ductile Iron ASTM A53 BOLTS: Minimum 1/2 ASTM A242 high strength, low alloy coated, Powercron black cationic electro-coat. Gaskets: Sizes 2-1/2" - MIDDLE RING: Steel per ASTM A3 FOLLOWERS: Ductile Iron ASTM A53 Sizes 14 and Larger: MIDDLE RING: ASTM A3 Steel FOLLOWERS: ASTM A3Steel Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber. Gasket temperature range -40 o F to 2 o F (-40 o C - 0 o C) Recommended for water, salt solutions, mild acids, bases, sewage and natural gas. Available Options: EPDM Bolts & Nuts: Nominal sizes 2 and larger: minimum 5/ bolts ASTM A242/ANSI/AWWA C111/A21.11 corrosion resistant, high strength low alloy; heavy hex nuts A53 per ANSI/AWWA C219. Available Options: Electro-coated Powercron ; Stainless Steel 1- Type 304 Finish: Heavy coat of corrosion resistant shop coat primer. Optional fusion applied epoxy per ANSI/AWWA C213. Working Pressure: Rated for 250 PSI working pressure when installed per manufacturer s instructions. Please contact JCM concerning pressure rating on specific sizes. JCM 200 Series Bolted Couplings meet or exceed the ANSI/AWWA C219 Standard as applicable. 25

30 JCM 202 Long Steel Couplings for Steel Pipe Sizes 202 LONG STEEL COUPLINGS - STEEL S NOM. O.D. RANGE SLEEVE LENGTH & THICKNESS NO. OF BOLTS CATALOG NUMBER X $ / X X X /4 X /4 X /4 X /4 X , Smaller and Larger Sizes available upon request Note: Applications in which pipe may move out of the coupling, correct anchorage of the pipe must be provided. PRICE APPR. WT. EA. (LBS.) JCM STEEL COUPLINGS OFFER THESE ADVANTAGES * No beveling, costly threading, exact pipe alignment or fitting is required. * Quick, simple to install, using only a wrench. * Gaskets absorb vibration and pipe movement - permits curves to be laid with straight pieces of pipe. * Simple, rugged and serviceable, JCM couplings are available for most sizes of steel, PVC, HDPE or cast/ ductile iron pipe sizes. 2

31 JCM 203 Steel Transition Couplings The JCM 203 Steel Transition Coupling provides a simple means of joining plain end pipe of the same nominal size but different outside diameter dimensions. The couplings are especially useful in joining old cast iron pipe to ductile iron pipe. Listed are the most common sizes. Other sizes are available upon request. Also see JCM 2 Ductile Iron Couplings. 203 STEEL TRANSITION COUPLINGS NOM. FROM O.D. RANGE TRANSITION TO O.D. RANGE SLEEVE LENGTH JCM 204 Steel Reducing Couplings MIDDLE RING THICKNESS CATALOG NUMBER PRICE / $ / , / , / , / , OTHER S AVAILABLE UPON REQUEST NOTE: Applications in which pipe may move out of the coupling, correct anchorage of the pipe must be provided. APPR. WT. EA. (LBS.) The JCM 204 Steel Reducing Coupling is the simplest means of connecting any combination of two sizes or types of pipe. There is practically no limit to the pipe sizes that can be connected - either to reduce or increase in size. One common use is joining large steel pipe to ductile iron or C-905 PVC pipe. Listed are the most common sizes. Other sizes are available upon request. 204 STEEL REDUCING COUPLINGS NOM FROM O.D. RANGE REDUCE TO O.D. RANGE CATALOG NUMBER PRICE $ 2,14.0 2, , , ,329. 2,3.00 2, , ,3.00 2, , ,01.0 OTHER S AVAILABLE UPON REQUEST NOTE: Applications in which pipe may move out of the coupling, correct anchorage of the pipe must be provided. APPR. WT. (LBS.)

32 JCM Ductile Iron Couplings Now Offering Nominal Pipe Sizes 2 DUCTILE IRON COUPLINGS - STANDARD - CI, DI, C-900/905, DI HDPE NOM. O.D. RANGE CATALOG NUMBER NO. OF BOLTS SLEEVE LENGTH PRICE SHOPCOAT ALLOY BOLTS (E) EPOXY COAT ADD TO LIST (SS) STAINLESS STEEL 304 BOLTS ADD TO LIST Note: Applications in which pipe may move out of the coupling, proper anchorage of the pipe must be provided. (EB) ELECTRO COATED BOLTS ADD TO LIST $.0 $ 23. $ 4.70 $ /4, 2-1/ , , , , DUCTILE IRON COUPLINGS - OVERD (A/C Class 200 & oversized pipe) NOM. O.D. RANGE CATALOG NUMBER NO. OF BOLTS SLEEVE LENGTH PRICE SHOPCOAT ALLOY BOLTS (E) EPOXY COAT ADD TO LIST (SS) STAINLESS STEEL 304 BOLTS ADD TO LIST (EB) EPOXY BOLTS ADD TO LIST $.90 $ 23. $ 4.20 $ DUCTILE IRON COUPLINGS - IPS PVC, IPS HDPE, STEEL NOM. O.D. RANGE CATALOG NUMBER NO. OF BOLTS SLEEVE LENGTH PRICE SHOPCOAT ALLOY BOLTS (E) EPOXY COAT ADD TO LIST (SS) STAINLESS STEEL 304 BOLTS ADD TO LIST (EB) ELECTRO COATED BOLTS ADD TO LIST $.0 $ 23. $ 4.70 $ / , , , APPR. WT. (LBS.) APPR. WT. (LBS.) APPR. WT. EA. (LBS.) 2

33 JCM 2 Ductile Iron Transition Couplings The JCM 2 Ductile Iron Transition Coupling is part of a uniquely simple coupling system which provides an easy means of joining plain end pipe. These transition couplings join pipe of the same nominal size that have different outside diameter dimensions. At the same time they help overcome common installation problems such as pipe misalignment, stress build up, corrosive environments and working in a limited space. 2 DUCTILE IRON TRANSITION COUPLINGS NOM. FROM O.D. RANGE TO O.D. RANGE CATALOG NUMBER PRICE SHOPCOAT ALLOY BOLTS (E) EPOXY COAT ADD TO LIST (SS) STAINLESS STEEL 304 BOLTSADD TO LIST (EB) ELECTRO COATED BOLTS ADD TO LIST NO. OF BOLTS To Order Optional Coating and Bolts - add codes (*) indicated below to base catalog number Shopcoat Primer/Stainless Steel Hardware - (SS) Shopcoat Primer/Electro-coated Hardware - (EB) Epoxy Coating/Alloy Hardware - (E) Epoxy Coat/Stainless Steel Hardware - (ES) Epoxy Coat/Electro-coated Hardware - (EE) SLEEVE LENGTH 2, 2-1/ $ $ 23. $ 4.70 $ , Note: Applications in which pipe may move out of the coupling, proper anchorage of the pipe must be provided. APPR. WT. (LBS.) 29

34 JCM 214 Pipe End Cap Couplings The JCM 214 Pipe End Cap Couplings is a quick, simple means of capping plain end pipe in either permanent or temporary installations. Furnished standard with a threaded outlet, this fitting is often used as a test cap, air release or as a means of reduction for a smaller line extension. The optional restrained coupling end eliminates the need for required thrust blocks. 214 END CAP COUPLINGS (WITH 2 IPS OUTLET) NOM. O.D. RANGE CATALOG NUMBER PRICE Shopcoat Alloy Bolts (E) EPOXY COAT ADD TO LIST JCM 219 Restrained Ductile Iron Couplings (SS) STAINLESS STEEL 304 BOLTS ADD TO LIST (EB) ELECTRO COATED BOLTS ADD TO LIST NO. OF BOLTS SLEEVE LENGTH APPR. WT. (LBS.) $ 19. $ 23. $ 7.20 $ *Pipe sizes 3.50 & 3.9 have 1-1/2 IPS outlet. Note: Applications in which pipe may move out of the coupling, proper anchorage of the pipe must be provided. Requires thrust blocks or restraint. Restrained ends available sizes 4 -. Add (R) to end of catalog number to indicate restrained ends. (Not for use A/C pipe, HDPE or PVC pipe). Price on inquiry. The JCM Restrained Ductile Iron Coupling simplifies piping installations requiring tie rods or other types of thrust restraint. The Ductile Iron Coupling eliminates the need for exact pipe fit, alignment and end preparation. The integral restraining set screws provide restraint equal to restrained M.J. glands and eliminate the need for cumbersome tie rods or harness assemblies. 219 RESTRAINED DUCTILE IRON COUPLINGS NOM. O.D. RANGE CATALOG NUMBER PRICE NO. OF BOLTS NO. OF SET SCREWS EA. END APPR. WT. (LBS.) P.O.A P.O.A P.O.A P.O.A P.O.A P.O.A. 1 Larger Sizes available upon request. NOTE: Restrained ends are not for use on Asbestos Cement, HDPE or PVC pipe. 30

35 JCM 2 Long Ductile Iron Couplings The JCM 2 Long Ductile Iron Coupling. This extra-long coupling provides a wide range, accommodates wide gaps between pipe ends, reduces inventory and fits both cast iron and A/C Class 0 pipe in the popular 4, & sizes. The JCM 2 utilizes the same JCM original transition gasket system. One coupling replaces two or more standard couplings. Unique transition gaskets change standard couplings into transition couplings, eliminating the need to stock transition couplings or color-coded end rings, gaskets and loose parts. 2 LONG DUCTILE IRON COUPLINGS NOM. O.D. RANGE CATALOG NUMBER PRICE SHOPCOAT ALLOY BOLTS (E) EPOXY COAT ADD TO LIST (SS) STAINLESS STEEL 304 HARDWARE ADD TO LIST (EB) ELECTRO COATED BOLTS ADD TO LIST Material Specifications: Sleeve & Flanges: Ductile Iron Per ASTM A Gaskets: Styrene-Butadiene Rubber (SBR) has good physical properties. Compounded for use with water, salt solutions, mild acids an bases; has excellent abrasion resistance. Per ASTM D Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services. Bolts: 5/ Corrosion resistant, high strength low alloy oval neck track head bolts per ASTM A242/ANSI/AWWA C111/A21.11 and heavy hex nuts per A53 or equal. Optional Hardware: Stainless Steel 1- Type 304 or 31. Coated Alloy Hardware, Powercron black cationic Electro-coat. Coating: Corrosion resistant shop coat paint primer. Optional fusion applied epoxy coating per ANSI/AWWA C213. Other coatings available upon request. Working Pressure: Fittings are rated for 0 PSI working pressure when installed per manufacturer s instructions. Inspection of pipe integrity is the responsibility of the end user. For higher working pressure applications, contact JCM Industries. JCM Couplings meet or exceed ANSI/AWWA C219 Standard for Bolted Couplings as applicable. To Order Optional Coating and Bolts - add codes (*) indicated below to base catalog number Shopcoat Primer/Stainless Steel Hardware - (SS) Shopcoat Primer/Electro-coated Hardware - (EB) Epoxy Coating/Alloy Hardware - (E) Epoxy Coat/Stainless Steel Hardware - (ES) Epoxy Coat/Electro-coated Hardware - (EE) NO. OF BOLTS SLEEVE LENGTH $ $ 23. $ 75.0 $ / Note: Applications in which pipe may move out of the coupling, correct anchorage of the pipe must be provided. APPR. WT. (LBS.) 31

36 JCM 220 Galvanized Compression Fittings 220 GALVANIZED COMPRESSION COUPLINGS JCM FITTINGS NOM. O.D. CATALOG NUMBER PRICE OVERALL LENGTH CTN. QTY. CTN. WT. APPR. WT. (LBS.) 220 Compression Coupling 1/2 3/ /4 1-1/ L L L L L L $ / 4-1/4 4-1/2 4-3/ / Pressure rating: 0 PSI Not suitable for gas service 225 Insulating Adapter Gaskets For adapting iron pipe size fittings to copper tube size. Also for insulation between dissimilar metals to prevent galvanic corrosion. 225 INSULATING ADAPTER GASKETS NOMINAL S CATALOG NUMBER PRICE 1/2 IP X 1/2 CT $.30 3/4 IP /4 CT IP X 1 CT /4 IP X 1-1/4 CT /2 IP X 1-1/2 CT IP X 2 CT

37 JCM Transition Gaskets For Models 2, 211, 2, 214, 2, 21, 301, 30, 307 Couplings and FCA s The uniquely simple JCM Wide Range Coupling and Flanged Coupling Adapter system utilizes self-centering, extra wide transition gaskets eliminating the need for stocking special transition couplings or color coded flanges and gaskets. Stock JCM Ductile Iron Coupling and JCM Flanged Coupling Adapters and change only gaskets to make a transition between A/C, Cast Iron, Ductile Iron, Steel and PVC pipe. Use the same size gasket on both ends to make a straight coupling. GASKETS FOR STANDARD 2 DUCTILE IRON COUPLINGS NOM. FITS COUPLING SLEEVE GASKET O.D. RANGE FITS TYPES & CLASSES OF GASKET NUMBER PRICE 2-1/4, 2-1/ *This size gasket does not have extended lip. CI, 2-1/2 PVC, STEEL 2 PVC, STEEL, CI CI, DI, A/C 0, C-900 PVC IPS PVC, STEEL CI, DI, A/C 0, C-900 PVC IPS PVC, STEEL, HDPE SDR 35 STEEL TUBING CI, DI, A/C 0, C-900 PVC IPS PVC, STEEL, HDPE SDR 35 STEEL TUBING CI, DI, A/C 0, C-900 PVC IPS PVC, STEEL, HDPE SDR 35 STEEL TUBING CI, DI, C-900 PVC IPS PVC, STEEL, HDPE SDR 35 CI, DI, C-900 PVC IPS PVC, STEEL, HDPE SDR 35 CI, DI, C-905 PVC CI CI, DI, C-905 PVC CI G2-02 G * G2-039 G * G2-040 G G G G2-090 G G G G G G G G2-11 G G G G G G2-30 G2-5 G G2-170 $ GASKETS FOR OVERD 2 DUCTILE IRON COUPLINGS NOM. FITS COUPLING SLEEVE GASKET O.D. RANGE FITS TYPES & CLASSES OF GASKET NUMBER PRICE A/C CI, DI, C-900 PVC IPS PVC, STEEL, HDPE A/C CI, DI, C-900 PVC IPS PVC, STEEL, HDPE A/C CI, DI, C-900 PVC IPS PVC, STEEL, HDPE A/C CI, DI, C-900 PVC IPS PVC, STEEL, HDPE A/C CI, DI, C-900 PVC IPS PVC, STEEL, HDPE G G G G G G G2-097 G G G2-00 G G G G G $

38 JCM 241 Standard Length Optimum Range Ductile Iron Couplings JCM 242 Long Length Optimum Range Ductile Iron Couplings JCM Optimum Range Coupling Full Range capability for pipe sizes 3 through Rated for 250 PSI 242 Long length middle ring allows for deeper pipe insertion and accommodates wide gaps between pipe ends Reduces inventory - one coupling fits SDR35, IPS PVC, C-900 PVC, Ductile Iron, Steel, Cast Iron and A/C Pipe classes 0, 0 and 200 Non-compromising design with maximum number of bolts for uniform tightening provides the engineered test and field proven service and reliability of the JCM Ductile Iron Coupling family NOM. O.D. RANGE CATALOG NUMBER SLEEVE LENGTH NO. OF BOLTS PRICE (E) EPOXY COAT ADD TO LIST (SS) STAINLESS STEEL 304 BOLTS ADD TO LIST MATERIAL SPECIFICATIONS Flanges & Middle Ring: Ductile Iron Per ASTM A53 Gaskets: Buna N - specially compounded new rubber polymer for superior shelf life and resistance to permanent set. Recommended for use on water, salt solutions, mild acids, bases and sewage. Bolts: Corrosion resistant, high strength low alloy bolts and nuts per A242/ANSI/AWWA C111/A Optional stainless steel 1- Type 304, or Epoxy coated per Powercron black cationic electrocoat Coating: Corrosion resistant shop coat paint primer. Optional fusion applied epoxy coating per AWWA C-213 as applicable. JCM Couplings meet or exceed ANSI/AWWA C219 Standard for Bolted Couplings as applicable. JCM 241 & 242 Couplings are rated for 250 PSI working pressure. To Order Optional Coating and Bolts - add codes (*) indicated below to base catalog number Shopcoat Primer/Stainless Steel Hardware - (SS) Shopcoat Primer/Epoxy Coated Hardware - (EB) Epoxy Coating/Alloy Hardware - (E) Epoxy Coat/Stainless Steel Hardware - (ES) Epoxy Coat/Epoxy Coated Hardware - (EE) $ $ $ (EB) EPOXY BOLTS ADD TO LIST $ APPROX. WT. EA. (LBS.) , ,

39 JCM Product Bolt Options Hardware is sold in complete assembly only. Assemblies include bolt, nut and appropriate washers. JCM Product Model Alloy Assembly Product Size Bolt Size Order Number Price Each Ductile Couplings / x 7-1/ $ Ductile Couplings / x Ductile Couplings / x Long Ductile Iron Coupling / x Optimum Range Ductile Coupling / x Optimum Range Ductile Coupling / x Fabricated Tapping Sleeve /4 x -3/ Fabricated Tapping Sleeve /4 x JCM Product Model 304 Stainless Steel Assembly Product Size Bolt Size Order Number Price Each 201 Steel Couplings /2 x 7-1/ $ Steel Coupling 5 Middle Ring / x Steel Coupling 7 Middle Ring / x Steel Coupling Middle Ring / x Ductile Couplings / x 7-1/ Ductile Couplings / x Ductile Couplings / x Long Ductile Iron Coupling / x Optimum Range Ductile Coupling / x Optimum Range Ductile Coupling / x Fabricated Tapping Sleeve /4 x -3/ Fabricated Tapping Sleeve /4 x Tapping Sleeve PVC/Steel/HDPE / x -1/ Tapping Sleeve PVC/Steel/HDPE / x 7-1/2 4009* Stainless Tap Sleeve / x -1/ Stainless Tap Sleeve / x 7-1/2 4009* Stainless Tap Sleeve / x 7-1/2 4009* Tapping Sleeve Outlets / x -1/ Tapping Sleeve Outlets / x 7-1/2 4041* Tapping Sleeve All Outlets /4 x 4040* *Indicates Double Washer Assembly 35

40 JCM 230 and 231 HDPE Pipe Stiffeners New, Advanced Design Provides... Corrosion Resistance Rigid Reinforcement of Pipe Wall for Pipe Connections Accurate Pipe I.D. Sizing maintains proper Outside Diameter 1/ Tapered Insert End provides for Easy Installation 90 1/ Flared End Secures Stiffener to End of Pipe Positive Reinforcement without interference JCM HDPE Pipe Stiffeners are designed to support the interior wall of HDPE for critical pipe joining applications. Recommended for all pipe end connections utilizing mechanical bolt-on fittings, the JCM Pipe Stiffeners support the pipe s end and controls the necking down reaction to the pressure applied during normal installation of fittings used in pipe joining applications. The JCM HDPE Pipe Stiffeners are formed of stainless steel, 304 or 31 material, to the actual inside pipe diameter provided by the customer. This accurate formation provides for ease of installation and maintains the proper outside diameter for a successful, trouble free application that provides long-term service. JCM Pipe Stiffeners are available for Steel Size and Ductile Iron Size HDPE in SDR11,13.5, 17, 21, 2, 32.5 JCM Pipe Stiffeners Material Specifications: ASTM A240 - TP 304 Stainless Steel or 31 Stainless Steel Nominal Pipe Size 230 Stiffener Width Price Each 231 Stiffener Width Price Each xxxx $ xxxx $ xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx Smallest I.D./O.D. available Sizes larger than 3 available upon request Stiffeners provided as 304 Stainless Steel. Optional 31 Stainless Steel available - priced on application. Nominal Size Stiffeners 4-22 are 17 Gauge Stainless Steel Material Nominal Size Stiffeners 24-3 are Gauge Stainless Steel Material HOW TO ORDER 1. Select nominal pipe size of HDPE. 2. Select Width of Stiffener (Model wide or Model wide). 3. Insert actual HDPE pipe I.D. (provided by xxxx. The pipe I.D. determines the stiffener O.D. and completes the order number. Example: To order a 304 stainless, wide stiffener, for steel size nominal SDR 17 pipe, with an actual pipe I.D. of 7.55, order number: 231- Note: JCM recommends fusion joints as a primary method of connection. Mechanical fittings are a secondary and limiting choice. JCM 230 Pipe Stiffeners are designed for use with mechanical couplings, clamps and fittings where stiffening of the pipe is necessary for proper gasket seal. Caution needs to be taken to prevent (1) shear loading on the joint, (2) migration of the stiffener out of the end of the pipe from lack of a back load on stiffener rim or load on the stiffener. Applications in which pipe may move out of the fitting, correct anchorage of the pipe must be provided. 3

41 JCM Products For Polyethylene Pipe JCM Industries manufactures a number of products which have proven to be very applicable to HDPE Pipe. Due to the unique characteristics of polyethylene pipe, special attention should be applied to the repair, connection and tapping procedures performed in systems using this type of pipe. Products especially applicable to HDPE pipe include: 1-2 Universal Clamp Couplings All Stainless Steel Universal Clamp Couplings 114 MJ Repair Sleeve 230/231 Stiffener for HDPE Tapping Sleeves (4 size and larger) 414 Fabricated Mechanical Joint Tapping Sleeve All Stainless Steel Tapping Sleeves Tapping Sleeves with MJ Outlets Stainless Steel Tapping Sleeves Threaded Outlet Tapping Sleeve (1/2-4 Outlets) - Best all round saddle in nominal sizes 4 through Wide Body Service Saddle (1/2, 3/4, 1 outlets, 2 - sizes) Service Saddle with Double Stainless Steel Straps (3/4 thru 2-1/2 outlets, 2-24 sizes) 00 Series Restrainers Success in these products is largely due to the design criteria that took the working characteristics of HDPE Pipe into consideration. Design characteristics inherent to JCM clamps, couplings, tapping sleeves, saddles and other products area as follows: GASKETS - Tapping sleeve and service saddle gaskets should have wide cross section with enough volume to store compression energy. Gaskets should be of a hardness which will flex with pipe pressure fluctuations. Outlet seals should have a mechanical sealing lip that utilizes line pressure to increase seal. Outlet gaskets should be externally and internally confined. TAPPING SLEEVE OR CLAMP BODY - Tapping sleeve or clamp coupling body should conform to the HDPE pipe and support it and the branch (in cases of outlets). Width of sleeve should be such that it spreads the load to prevent point loading or deformation of the pipe. BOLTING - Bolting should be self-aligning and heavy enough to properly load the gasket and assure an adequate safety factor. For specific applications or questions regarding product recommendations or availability, please call the JCM Inside Sales Team. PRODUCTS FOR POLYETHYLENE JCM 1 Universal Clamp Coupling JCM 404 Service Saddle JCM 4 Tapping Sleeve JCM recommends Models 230/231 pipe stiffeners be used when joining, or connecting to, High Density Polyethylene Pipe. 37

42 JCM Selection Guide to Flanged Coupling Adapters PRODUCT NUMBER & TYPE APPLICATION, S AND ADDITIONAL INFORMATION 301 Flanged Coupling Adapter This most popular and versatile FCA provides a quick means of joining plain end pipe for flanged fittings, valves and equipment. Short laying length does not require exact alignment of pipe and preparation. Can be used with butterfly and wafer valves. Sizes Fabricated Flanged Coupling Adapter Quick means of joining plain end pipe to flanged fittings of same nominal size. Most popular sizes - 14 and larger. Also available in sizes Fabricated Reducing Flanged Coupling Adapter Provides a quick means of increasing or reducing pipe sizes at a flanged connection. Sizes 2 and larger. 30 Fabricated Flanged Coupling Adapter A very versatile FCA which combines the ductile iron coupling system to a flanged outlet. Excellent for cutting in equipment or where more take up capability is needed. Available for and Asbestos Cement pipe. Sizes Fabricated Reducing Flanged Coupling Adapter Similar to the JCM 30 FCA this adapter is available with reducing or larger flanges. Excellent for installing reduced sizes of meters and equipment in lines. For pipe sizes 3 - with larger or smaller flanges. 309 Fabricated Dismantling Joint Simplify installations and replacement of flanged fittings in retrofitting applications. Provides the solution for adding, repairing or replacing flanged fittings within a flanged pipe system. Adjustable, slip joint design accommodates either wide gaps or close quarter installations and eliminates the need for precise measurements between flange connections. Available in sizes 2 and larger, for ductile iron or flanged steel pipe systems. 3

43 JCM 301 Flanged Coupling Adapters The Quick, Simple, Economical way to join flanged fittings, valves and meters to plain end pipe. Ductile Iron body and flange and corrosion resistant high strength alloy bolts provide high strength and corrosion resistance to installations. Special flange design provides extra versatility which makes it an excellent means for installing wafer type valves, fittings and equipment. Laying length provides extra margin of safety for field cutting of pipe, yet is short enough for close quarter installations. Full bolting to compression flange provides proper gasket compression. Many adapters use half the number of the standard flange. Optional retainer set screws anchor the adapter on steel, cast iron and ductile iron pipe eliminating the need for tie rods, thrust blocks and additional joint restraint. Retainer set screws are not exposed to the line contents and do not require drilling of pipe. JCM 301 Flanged Adapters are 5/0 drilling pattern. Special flange gasket provides extra sealing capability on new and old flanged fittings and equipment. The wide molded gasket has a special lip which increases its sealing pressure with increases in line pressure. Special wide range gaskets, which are interchangeable with JCM Ductile Iron Couplings, provide extra field versatility necessary on installations involving deflection, oversize pipe, out-of-round and uneven pipe ends. JCM 301 Flanged Coupling Adapter Dimensions Nominal Size A B C D 3-1/ 4-1/ / / 5-1/ /2 11-1/ 7-5/1 3-1/2 5-1/2 13-1/2 9-9/1 3-1/2 5-1/2 1-1/4 11-9/ / 4 7 The JCM 301 Flanged Coupling Adapter combines a flange with a ductile iron flexible coupling to provide a compact adapter fitting to connect plain end pipe to flanged fittings, meters, valves and equipment. The JCM 301 can be used to make on-site flanged spools and, when used with the optional set screws, eliminates the need for extra tie rods or harnessing assemblies on flanged equipment. 39

44 JCM 301 Flanged Coupling Adapters 301 Standard Flanged Coupling Adapter 301 Optional Restrained Flanged Adapter 301 Standard Flexible Flanged Coupling Adapter The JCM 301 FCA provides a quick simple means of joining flanged fittings to plain end pipe. The 301 will absorb vibration, accommodate pipe deflection and expansion, provide for easy equipment removal and re-installation, and eliminate the need for exact measurements. Applications advantageous for using JCM FCA s Valve insertions Equipment connections and offset adjustment Converting flanged fittings to mechanical joint or push on type Dampening vibration Providing for field fitting of flanged spool pieces 301 FLANGED COUPLING ADAPTERS NOM. 3 4 O.D. RANGE CATALOG NUMBER PRICE SHOPCOAT ALLOY BOLTS $ QTY OPTIONAL SET SCREWS 4 4 N/A 4 4 N/A N/A PRICE WITH SET SCREWS $ ,113. 1,113. *Set Screws are not for use on Asbestos Cement, HDPE or PVC pipe. Add (R) to end of Catalog Number to indicate optional set screws. Note: Applications in which pipe may move out of the coupling, proper anchorage of the pipe must be provided. APPR. WT (LBS.) Material Specifications: Sleeve & Flanges: Sleeve - Ductile Iron Per ASTM A53. Flange - Ductile Iron with ANSI Class 5 & 0 bolt pattern Gaskets: Bolts: Coating: Styrene-Butadiene Rubber (SBR) has good physical properties. Compounded for use with water, salt solutions, mild acids and bases; has excellent abrasion resistance. Per ASTM D Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services. The material is not recommended for use on oil, ozone or weather resistant applications. 5/" Corrosion resistant, high strength low alloy oval neck track head bolts per ASTM A242/ANSI/AWWA C111/A21.11 and heavy hex nuts per A53 or equal. Optional Hardware: Stainless Steel 1- Type 304 or 31, Coated Alloy Hardware, Powercron black cationic Electro-coat. Corrosion resistant shop coat paint primer. Optional fusion applied epoxy coating per ANSI/AWWA C213. Other coatings available upon request. JCM Flanged Adapters meet or exceed ANSI/AWWA C219 Standard for Bolted Couplings as applicable. 40

45 JCM 303 Fabricated Flanged Coupling Adapters The JCM 303 Fabricated Flanged Coupling Adapter provides a simple means of joining plain end pipe to flanged fittings, valves and equipment. Fabricated from steel, these fittings are readily available in large or small sizes with a standard AWWA Class D flange. Special or heavier flanges are available on request. How To Order 1. Determine pipe O.D. and flange size & type to be joined. 2. Order catalog Number indicating O.D. and flange size selected. EXAMPLE: For O.D. ductile iron pipe to be joined to 1 Class D flange, order: x1 JCM 303 FLANGED COUPLING ADAPTERS NOM. O.D. RANGE NOMINAL FLANGE CATALOG NUMBER PRICE APPR. WT. (LBS.) $ X X X X X X 1, X 1, X 14 1, X 14 1, X 14 1, X 1 1, X 1 1, X 1 1, X 1 1, X 1 2, X 1 2, X 20 2, X 20 2, X 20 2, X 24 2, X 24 2, X 24 2, P.O.A P.O.A P.O.A P.O.A. 5 FLANGES: Standard 5/0 bolt pattern. Other flanges available upon request. Other sizes available upon request. Epoxy coating and stainless steel bolts are available as an extra. NOTE: Applications in which pipe may move out of the coupling, correct anchorage of the pipe must be provided. 41

46 JCM 304 Fabricated Reducing Flanged Coupling Adapters The JCM 304 Reducing Flanged Coupling Adapter is similar in construction to the JCM 303 FCA but has a reducer or increaser combination of coupling and flange. How To Order 1. Determine pipe O.D. and flange size to be joined. 3. Insert desired flange size to complete catalog number. 2. Select proper coupling O.D. catalog number. EXAMPLE: To join 1 O.D. steel pipe to 4 Class D flange, order: x FABRICATED FLANGED COUPLING ADAPTERS NOM. O.D. RANGE CATALOG NUMBER (X) ADD FLANGE STANDARD AVAILABLE FLANGE S X X X X X X X X X X X FLANGES: X Standard 5/0 bolt pattern X X Other flanges available upon X request X X X X X X X X OTHER S AVAILABLE UPON REQUEST. NOTE: Applications in which pipe may move out of the coupling, correct anchorage of the pipe must be provided. JCM 304 Fabricated Reducing Flanged Coupling Adapters are Priced on Application. For quotation, contact the JCM Inside Sales Team at or

47 JCM 30 Fabricated Flanged Coupling Adapters The JCM 30 Fabricated Flanged Coupling Adapter combine the versatile JCM Ductile Iron Coupling system with a fabricated flanged end to provide a fitting which allows for pipe misalignment, less critical pipe end preparation and ease of equipment installation and removal. The 30 FCAs are easily adapted from one type of pipe to another with the simple JCM Transition Gasket system. These FCAs simplify installations on larger A/C pipe and are available in the hard to find and sizes. Material Specifications JCM 30 & 307 FCA: Body/Follower: Flanged End: Gaskets: Bolts: Finish: Ductile Iron ASTM A53 Fabricated ASTM A25 Grade C Steel with ANSI/ AWWA C207 Class D Flange, with ANSI 0lb. drilling. Specially compounded new rubber polymer for superior shelf life and resistance to permanent set. Recommended for water, salt solutions, mild acids and bases. Flange gasket not furnished. Corrosion resistant, high strength low alloy bolts and nuts A242/ANSI/AWWA C111/A Flanged bolts not furnished. Heavy coating of corrosion resistant shop coat primer. Optional Fusion Epoxy Coating available per ANSI/ AWWA C213. Meets or exceeds ANSI/AWWA C219 Standard for Bolted Couplings as applicable 30 FLANGED COUPLING ADAPTERS NOM. 3 4 COUPLING O.D. RANGE NOM. FLANGE CATALOG NUMBER X X X X X X X X X PRICE $ ,0.20 1,9.50 1,9.50 1,34.40 OVERALL LENGTH Epoxy coating and stainless steel bolts available as an extra. Integral retainer set screws are available as an extra. Add (R) to end of catalog number. Price on application. NOTE: Restraining set screws are not for use on Asbestos Cement, HDPE or PVC pipe. NOTE: Applications in which pipe may move out of the coupling, proper anchorage of the pipe must be provided. APPR. WT. (LBS.)

48 JCM 307 Fabricated Reducing Flanged Coupling Adapters The JCM 307 Reducing Fabricated Flanged Coupling Adapter combines the versatile JCM Ductile Iron Coupling system with an increaser or reducer fabricated flanged end to provide a fitting which allows for pipe misalignment, less critical pipe end preparation and ease of equipment installation and removal. The 307 FCAs are easily adapted from one type of pipe to another with the simple JCM Transition Gasket system. These FCAs simplify installations on larger A/C pipe and are available in the hard to find and sizes. 307 FLANGED COUPLING ADAPTERS NOM. 3 4 COUPLING O.D. RANGE CATALOG NUMBER (X) ADD REQUIRED FLANGE X X X X X X X X X X X X X X X X X OVERALL LENGTH PRICE P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. P.O.A. Epoxy coating and stainless steel bolts available as an extra. Integral retainer set screws are available as an extra. Add (R) to end of catalog number. Price on application. NOTE: Restraining set screws are not for use on Asbestos Cement, HDPE or PVC pipe. NOTE: Applications in which pipe may move out of the coupling, proper anchorage of the pipe must be provided. JCM 307 Fabricated Reducing Flanged Coupling Adapters are Priced on Application. For quotation, contact the JCM Inside Sales Team at or

49 JCM 309 Dismantling Joints Dismantling joints simplify installations and replacement of flanged fittings in retrofitting applications. JCM 309 Dismantling Joints provide the solution for adding, repairing or replacing flanged fittings within a flanged pipe system. Adjustable, slip joint design accommodates either wide gaps or close quarter installations and eliminates the need for precise measurements between flange connections. Available in sizes 2 and larger, for ductile iron or flanged steel pipe systems. Standard flanges AWWA C207 Class D Flange with 0 lb. drilling. Other flanges available upon request. Restraint system available upon request. JCM 309 Dismantling Joints Offer: Greater adjustment ability speeds installations and reduce system downtime. Accommodates future modifications and system adjustments. Simplifies installation - one fitting integrates into system operating as flanged adapter and an adjustable spool piece. MATERIAL SPECIFICATIONS - JCM 309 Dismantling Joint Flanged Adapter Body: ASTM A513, ASME SA 75 GR0, or Ductile Iron ASTM A53. Follower Flange: AISI C, ASME SA3, or Ductile Iron ASTM A53. Flange: AWWA C207 Class D Flange, 0 lb. drilling. Optional flanges available. Flange Extension: Schedule 40 Steel Pipe Bolts: Corrosion resistant, high strength low alloy A242/ANSI/AWWA C111/A Optional Stainless Steel 1- Type 304 available. Finish: Heavy coat of corrosion resistant metal primer. Optional Fusion Applied Epoxy Coating per ANSI/AWWA C213 available. Gasket: Specially compounded new rubber polymer per ASTM D2000 for superior shelf life and resistance to permanent set. Recommended for water, salt solutions, mild acids, bases. 45

50 JCM Service Saddle Selection Guide PRODUCT NUMBER & TYPE APPLICATION, S AND ADDITIONAL INFORMATION 402 Double Strap Service Saddle 40 Coated Double Strap Service Saddle 401 Single Strap Service Saddle 407 Coated Single Strap Service Saddle 403 Wide Body Service Saddle 405 Coated Wide Body Service Saddle 404 Service Saddle with Double Stainless Steel Straps 40 Coated Service Saddle with Double Stainless Steel Straps 41 Threaded Outlet Tap Sleeve 43 All Stainless Threaded Outlet Tap Slv Large outlet heavy duty double strap service saddle. Sizes 2-24 with outlet sizes 1/2-2-1/2. Coated saddle with electro-galvanized straps. Sizes 2-24 with outlet sizes 1/2-2-1/2. Single strap service saddle with wrap around design utilizes single electro-galvanized strap. Sizes 2 - with outlet sizes 1/2-2-1/2. Coated saddle with electro-galvanized strap. Sizes 2 - with outlet sizes 1/2-2-1/2. Single strap service saddle with stainless steel band especially recommended for pipe requiring extra reinforcement. Sizes 2 - with outlet sizes 1/2-2-1/2. Single strap service saddle with stainless steel band and fusion plastic coating for hot and corrosive soils. Sizes 2 - with outlet sizes 1/2-2-1/2. Large outlet heavy duty saddle with two wide stainless steel straps for extra pipe support and corrosion resistance. Sizes 2-24 with outlet sizes 1/2-2-1/2. Large outlet heavy duty saddle with two wide stainless steel straps and fusion plastic coating for hot and corrosive soils. Sizes 2-24 with outlet sizes 1/2-2-1/2. For taps and connections on larger pipe, thin wall pipe and pipe requiring extra reinforcement. Sizes 4-0 with outlet sizes 1/2-4. All stainless steel construction, especially recommended for aggressive or corrosive environments. Sizes 4-0 with outlet sizes 1/ Service Saddle for Concrete Steel Cylinder Pipe For 3/4-2 taps and connections in 1-4 concrete steel cylinder pipe. Available for standard and embedded cylinder pipe. 502 Stainless Steel Service Saddle Fabricated stainless steel service saddle with heavy duty design for pipe support, bolt torque and gasket compression necessary for a successful, long tern saddle installation. Sizes 2 -. Custom ranges available. 4

51 JCM Service Saddles JCM Service Saddles provide a quick, dependable means of tapping pipe for branch connections of 1/2 through 2-1/2. Use of economical JCM Service Saddles eliminate problems common to direct taps, such as leaking threads or split pipe, and reinforces the critical connection. JCM Service Saddles are designed for maximum safety and performance. The wrap around design, wide skirt and wide straps support and reinforce the pipe while providing excellent stability to the saddle. The heavy duty design of these saddles provides strength and mass for long term service. High pressure performance is assured by the broad, pressure activated gasket. Permanently set in a retaining cavity, the contoured gasket produces a positive initial seal which increases with increase in line pressure. The JCM 402, 404 and 40 saddles, with their wide bodies and large sealed outlet areas, provide an excellent means of repairing holes, pin holes and leaking 3/4 and 1 direct taps. DESIGNED FOR SAFETY AND PERFORMANCE BROAD PRESSURE ACTIVATED GASKET - for low and high pressure performance. CORROSION RESISTANT COATING - for long-term service. HEAVY THREADED OUTLET - with IPS or CC threads reinforces the critical connection. HEAVY DUTY DESIGN - provides strength and mass for long term service. WIDE STRAPS - increase the load bearing area of the straps. WIDE BODY WRAP AROUND CLOSED CANTED EARS - for extra protection against electrolysis and maximum strap bearing. DESIGN - support and reinforce the pipe and provide excellent stability. Material Specifications: Body: Ductile Iron per ASTM A53 Straps: Models 401, 402, 407, 40 - forged AISI 1 steel strap, zinc plated with dichromate seal. Models 403, 404, 405, 40 - Bands, Bolts, Nuts and Washers are 1- Type 304 Stainless Steel. Gasket: Compounded for use with water, salt solutions, mild acids, bases. Optional EPDM gasket available. Finish: Models 401, 402, 403, Standard Shop Coat Primer: Heavy coat of corrosion resistant metal primer. Models 405, 40, 407, 40 - Fusion Plastic Coating: fusion bonded, high density blue plastic coating, mils minimum thickness with a dielectric strength of over,000 volts. JCM Service Saddles meet or exceed ANSI/AWWA C00 as applicable. 47

52 JCM Service Saddles - Single Strap JCM 401 Single Strap Service Saddle with Electro Galvanized Strap JCM 403 Wide Body Service Saddle with Stainless Steel Strap The JCM 401 Single Strap Service Saddle is designed for maximum safety, performance and economy. The wrap around design, broad, pressure activated gasket and zinc plated with dichromate seal steel strap provide for ease of installation, high pressure performance and a long service life. The JCM 403 Wide Body Service Saddle utilizes an extra wide stainless steel strap with the broad, wrap around single strap saddle body to provide extra support and stability as well as to eliminate point loading. The 403 is especially recommended for PVC, thin wall pipe and pipe sensitive to point loading. NOM. O.D. RANGE APPR WT. (LBS.) CTN. QTY. JCM 401 SERVICE SADDLE CATALOG NUMBER X TAP CODE 3/4 & 1 PRICE 1-1/4 1-1/2 2, 2-1/2 PRICE JCM 403 SERVICES SADDLE CATALOG NUMBER X TAP CODE 3/4 & 1 PRICE 1-1/4 1-1/2 2, 2-1/2 PRICE X -- $ 2.70 N/A X -- $ N/A 2-1/ X N/A X N/A X N/A X N/A N/A N/A N/A X N/A X $ X $ X X X N/A X N/A X X X X X X X X X X X X X X X X X X X X X X X X X X X X How To Order 1. Determine O.D. of pipe, outlet size and thread type. 2. Select desired saddle type and tap order code. 3. Look under saddle listing to determine order number. Add tap code after base catalog number. EXAMPLE: For C.I. Pipe with O.D. of.90 with 1 IP thread, order: x 0IP. For stainless steel strap, order: x 0IP. OUTLET S 1/2 3/ /4 1-1/ /2 TAP CODES IP TAP CODES CC JCM JCM JCM 403/405 Strap Service Saddles with outlets 1-1/4-2-1/2 4

53 JCM Coated Service Saddles - Single Strap JCM 405 Single Strap Service Saddle with Stainless Steel Strap JCM 407 Wide Body Service Saddle with Electro Galvanized Strap The JCM 405 Coated Wide Body Service Saddle with Stainless Steel Strap is designed for maximum safety and performance in tapping all types of pipe in hot and corrosive soils. Extra corrosion resistance is built into this saddle with the heavy resilient plastic coating which is fusion applied to the saddle body. The JCM 407 Coated Wide Body Service Saddle utilizes an zinc plated with dichromate seal strap with the broad, wrap around single strap saddle body. The 407 features the extra corrosion resistance is built into this saddle with the heavy resilient plastic coating which is fusion applied to the saddle body. NOM. O.D. RANGE APPR WT. (LBS.) CTN. QTY. JCM 405 SERVICE SADDLE CATALOG NUMBER X TAP CODE 3/4 & 1 PRICE 1-1/4, 1-1/2, 2, 2-1/2 PRICE JCM 407 SERVICES SADDLE CATALOG NUMBER X TAP CODE 3/4 & 1 PRICE 1-1/4, 1-1/2, 2, 2-1/2 PRICE X -- $ 4.50 N/A X -- $ 3.90 N/A 2-1/ X N/A X N/A X N/A X N/A X N/A N/A N/A N/A X $ X $ X X X N/A X N/A X X X X X X X X X X X X X X X X X X X X X X X X X X X X How To Order 1. Determine O.D. of pipe, outlet size and thread type. 2. Select desired saddle type and tap order code. 3. Look under saddle listing to determine order number. Add tap code after base catalog number. EXAMPLE: For C.I. Pipe with O.D. of.90 with 1 IP thread, order: x 0IP. For electro galvanized strap, order: x 0IP. JCM JCM JCM 403/405 Strap Service Saddles with outlets 1-1/4-2-1/2 OUTLET S 1/2 3/ /4 1-1/ /2 TAP CODES IP TAP CODES CC

54 JCM Service Saddles - Double Strap JCM 402 Double Strap Service Saddle JCM 404 Service Saddle with Double Stainless Steel Straps The JCM 402 and 404 utilize the heavy duty double strap saddle body with corrosion resistant shop coat primer. The 402 is furnished with two zinc plated, dichromate seal straps sizes 2 -, on sizes.20 and larger, the 402 incorporates two fabricated, coated steel straps. The 404 is furnished with two wide stainless steel straps. NOM. O.D. RANGE WT. EA. LBS. CTN. QTY. JCM 402 SERVICE SADDLE CATALOG NUMBER X ADD TAP CODE 3/4 & 1 PRICE 1-1/4, 1-1/2, 2, 2-1/2 PRICE JCM 404 SERVICE SADDLE CATALOG NUMBER X ADD TAP CODE 3/4 & 1 PRICE 1-1/4, 1-1/2 2, 2-1/2 PRICE * X -- $ N/A * X -- $ 90. N/A 2-1/ * X N/A * X N/A ** X $ 4.90 ** X $ ** X ** X X X X X X X X -- N/A N/A X X X X X X X X X X X X X X X X X X X X X X X X X X X X X C X X X X C X X X X C X X X X X X C X X X X X X X X C X X X X *Outlets Not available in 1-1/4, 1-1/2, 2 or 2-1/2 **Outlets Not available in 2 CC or 2-1/2 IP OUTLET S 1/2 3/ /4 1-1/ /2 TAP CODES IP TAP CODES CC How To Order 1. Determine O.D. of pipe, outlet size and thread type. 2. Select desired saddle type and tap order code. 3. Look under saddle listing to determine order number. Add tap code after base catalog number. EXAMPLE: For C.I. Pipe with O.D. of.90 with 1 IP thread, order: x 0IP. For stainless steel straps, order: x0ip 50

55 JCM Coated Service Saddles - Double Straps JCM 40 Coated Saddle - Double Stainless Steel Straps JCM 40 Coated Saddle - Electro Galvanized Straps The JCM 40 and 40 utilize the heavy duty double strap saddle body with a fusion applied, heavy resilient plastic coating. The JCM 40 is furnished with two stainless steel straps. The model 40 is furnished with two zinc plated with dichromate seal straps.. NOM. O.D. RANGE WT. EA. LBS. CTN. QTY. JCM 40 SERVICE SADDLE BASE CATALOG NUMBER X ADD TAP CODE 3/4 & 1 PRICE 1-1/4, 1-1/2, 2, 2-1/2 PRICE JCM 40 SERVICE SADDLE BASE CATALOG NUMBER X ADD TAP CODE 3/4 & 1 PRICE 1-1/4, 1-1/2 2, 2-1/2 PRICE * X -- $ 1.00 N/A * X -- $ N/A 2-1/ *40-02 X N/A *40-02 X N/A ** X $ 130. ** X $ ** X ** X X X X X X X X X -- N/A N/A X X X X X X X X X X X X X X X X X X X X X X X X X X X X C X X X X C X X X X C X X X X X X C X X X X X X X X C X X X X OUTLET S 1/2 3/ /4 1-1/ /2 TAP CODES IP TAP CODES CC *Outlets Not available in 1-1/4, 1-1/2, 2 or 2-1/2 **Outlets Not available in 2 CC or 2-1/2 IP How To Order 1. Determine O.D. of pipe, outlet size and thread type. 2. Select desired saddle type and tap order code. 3. Look under saddle listing to determine order number. Add tap code after base catalog number. Example: For C.I. Pipe with O.D. of.90 with 1 IP thread, order: x 0IP. For electro galvanized straps, order: x0ip 51

56 JCM 425 Service Saddle for Concrete Steel Cylinder Pipe Service Saddle for 3/4 through 2 Taps and Connections on Concrete Steel Cylinder Pipe, Reinforced Concrete Pipe, Large Diameter Cast Iron and Ductile Iron. The JCM 425 Service Saddle is specifically designed for making safe, dependable taps into Concrete Steel Cylinder Pipe and Concrete Coated Steel Pipe. The threaded outlet, available in sizes 3/4 through 2 IP or CC, provides critical reinforcement to branch connections for service lines. These saddles can also be used to install air and vacuum valves, pitot tubes, injection lines and other equipment. The following are important features and benefits this saddle offers: *Provides critical reinforcement of pipe prior to removal of the prestress wire from the outlet area. This is a required feature to maintain pipe integrity on larger taps and many small taps. The separate bolt-in outlet makes possible this essential installation step. *The adjustable outlet accommodates variation in concrete coating from no coating to a thickness of 1-1/. Special outlets are available for embedded cylinder pipe and thicker coatings of concrete. *High and low pressure performance are assured by a broad, pressureactivated gasket. Permanently set in a retaining cavity, the contoured gasket produces a positive initial seal which increases with increases in line pressure. For coating thickness of 1-1/ or less. For coating thickness of over 1-1/. Outlet for Embedded Cylinder Pipe. Prices upon request. 425 SERVICE SADDLE FOR CONCRETE STEEL CYLINDER NOM. CONCRETE O.D. RANGE STEEL CYLINDER O.D.* CATALOG NUMBER X TAP CODE PRICE X -- $ X X X X X X X X X -- 1, X -- 1, *Longer outlet bolts are required for making taps on pipe with less than 1/4 coating OUTLET OUTLET TAP CODES IP THREAD CC THREAD 3/ / / Material Specifications: Body, Outlet, Washers: Ductile Iron ASTM A53 Outlet Bolts: Corrosion resistant, high strength low alloy (ANSI/AWWA C111/A21.11) Straps: Steel per ASTM A3. Optional Stainless Steel 1- Type 304. Gasket: Buna-N compounded for use with water, salt solutions, mild acids, bases, gas. Coating: Heavy coating of corrosion resistant shop coat primer. Optional Fusion Epoxy Coating available. GROUT DIAPERS Grout Diapers for Service Saddles These diapers make the recommended grouting of the service saddle a very quick procedure. Diapers are 11 wide with two 5/ straps and are constructed of one layer of Typar backed by a mil ply of polyethylene film. Order by pipe size. SADDLE PRICE 1-24 $

57 JCM 502 Stainless Steel Service Saddles All 304 Stainless Steel Construction NOMI O.D.RANGE (INCHES) SADDLE WIDTH (INCHES) CATALOG NUMBER X TAP CODE OUTLETS 3/4 & 1 PRICE OUTLETS 1-1/4-2 PRICE APPROX. WEIGHT (LBS.) x -- $ 0.90 N/A / x N/A x N/A x N/A Custom ranges available upon request x x x x x x x x x x $ OUTLET TAP CODES IP TAP CODES CC 502 SADDLE NUMBER OUTLET S AVAILABLE IP/CC 3/ thru /4-1 IP/CC thru /4 thru 2 IP/CC 1-1/ / MATERIAL SPECIFICATIONS - JCM 502 STAINLESS STEEL SERVICE SADDLE Band: 1- Type 304 Stainless Steel per ASTM A240 Outlet: 1- Type 304 Stainless Steel Threaded Half Coupling. Bolting Assembly: 1- Type 304 Stainless Steel per ASTM A240 Lift Bar: 1- Type 304 Stainless Steel Fasteners: 1- Type 304 Stainless Steel, nuts coated to prevent galling. Finish: Environmentally friendly passivation returns stainless steel to natural corrosion resistant state per ASTM A30 as applicable. Gasket: Pressure Rating: EPDM - excellent resistance to aging factors including ozone, oxygen, elevated temperatures and fluctuations in weather. Recommended for service in hot water, steam and dry heat. Most popular application on chloramine. Suitable for other popular chemicals - ketones, alcohols, phosphate ester hydraulic fluids, glycols, dilute acids and alkalis. Maximum temperature 300 o F wet. Not suitable for petroleum. 200 PSI Working Pressure, 225 PSI Test Pressure Meets ANSI/AWWA C00 as applicable. Recommended For: IPS PVC, C-900 PVC, Ductile Iron, Cast Iron, Steel and other types of pipe. Not recommended for High Density Polyethylene Pipe (HDPE) 53

58 JCM 41 Threaded Outlet Tapping Sleeve For taps and connections on larger pipe, thin wall pipe and pipe requiring extra reinforcement. The JCM 41 Fabricated Threaded Outlet Tapping Sleeve is especially recommended for service connections, air relief valve connections, taps on larger A/C, Cast Iron, Ductile Iron, PVC and Reinforced Concrete Pipe. The heavy gasket section and full sleeve support of this fitting offer much more stability, pipe reinforcement and strength than a strapped saddle, yet they are competitively priced. Readily available for pipe 4 and larger requiring IPS outlets of 3/4 through 4, these sleeves are furnished with shop coat and alloy bolts. Epoxy coating and stainless steel bolts are available at an additional charge. How To Order 1. Determine O.D. of pipe and outlet size. 2. Check listing to determine order number. If size is not listed, order by pipe O.D. size. EXAMPLE: For 24 Cast Iron with 25.0 O.D. with 3 IP outlet, order: x 17IP. For All Stainless Steel see 43 Threaded Outlet Tapping Sleeve 41 FABRICATED THREADED OUTLET TAPPING SLEEVE (IPS Outlet) NOM. 2* SLEEVE O.D. RANGE SLEEVE NUMBER X OUTLET ** X -- ** X X X X X X X X X X X X X X X X X X X X X X X X -- PRICE OUTLET S 3/4, 1, 1-1/4 1-1/2, 2, 2-1/2 PRICE OUTLET S 3, 4 P.O.A. N/A P.O.A. P.O.A. $ $ APPR. WT. (LBS.) X X X , X , X -- 1, , OTHER S AVAILABLE UPON REQUEST. OUTLET ORDER CODE IP 3/ /4 1-1/ / *2 Steel & Cast Iron Pipe Only **Outlets Available 3/4-1-1/2 IP/CC, 2 IP 2 CC Not Available Available Options for JCM 41: Epoxy Coated with Stainless Steel Hardware (additional charge). With CC Threaded Outlet (additional charge). 54

59 JCM 43 All Stainless Steel Threaded Outlet Tapping Sleeve For taps and connections on larger pipe, thin wall pipe and pipe requiring extra reinforcement in corrosive or aggressive conditions. The JCM 43 All Stainless Steel (304) Threaded Outlet Tapping Sleeve is especially recommended for aggressive or acidic conditions. The heavy gasket section and full sleeve support of this fitting offer much more stability, pipe reinforcement and strength than a strapped saddle, yet they are competitively priced. Readily available for pipe 4 and larger requiring IPS outlets of 3/4 through 4. How To Order 1. Determine O.D. of pipe and outlet size. 2. Check listing to determine order number. If size is not listed, order by pipe O.D. size. EXAMPLE: For 24 Cast Iron with 25.0 O.D. with 3 IP outlet, order: x 17IP 43 ALL STAINLESS STEEL THREADED OUTLET TAPPING SLEEVE (IPS Outlet) NOM SLEEVE O.D. RANGE SLEEVE NUMBER X OUTLET X X X X X X X X X X X X X X X X X X X X X X X -- PRICE OUTLET S 3/4, 1, 1-1/4, 1-1/2 2, 2-1/2 PRICE OUTLET S 3, 4 P. O. A. P. O. A. $.00 $ , , ,0.00 1, , , , , , , , , , , ,.00 APPR. WT. (LBS.) X -- 1, , X -- 1, , X -- 1, , X -- 2, , X -- 2,.00 2, OTHER S AVAILABLE UPON REQUEST. OUTLET ORDER CODE IP 3/ /4 1-1/ / Available Options for JCM 43: With CC Threaded Outlet (additional charge). 31 Stainless Steel Construction (P.O.A.) 55

60 JCM TAPPING SLEEVES MORE SELECTION, BENEFITS, OPTIONS Specifying the right tapping sleeve for the condition of the job is the best way to assure a successful tap. JCM Tapping Sleeves are readily available in a wide variety of types and options to meet your exact conditions. High strength to weight ratio, built-in range and large gasket cross sections are just some of the design features that make JCM Tapping Sleeve highly desirable on critical installations. JCM s expanded tapping sleeve selections and versatility assist our customers in selecting the correct JCM Model Tapping Sleeve for the job. Below is a chart that defines each tapping sleeve offering, its body material, design and gasket style along with the outlet material and style. For specialty, engineered tapping sleeves, refer to the JCM Industries Engineered Fittings Specification Manual. This manual includes: mechanical joint tapping sleeves, concrete steel cylinder pipe tapping sleeves, large diameter and unique contour sleeves along with numerous options and designs. JCM Tapping Sleeve Selection Chart JCM Model Number Body Material Gasket Style Outlet Material Outlet Style Carbon Steel 304 Stainless Steel Outlet Seal Outlet Seal Carbon Steel 304 Stainless Steel Threaded Outlet Threaded Outlet Carbon Steel Carbon Steel Carbon Steel Carbon Steel Outlet Seal Outlet Seal Outlet Seal Outlet Seal Carbon Steel Carbon Steel Carbon Steel Carbon Steel Flanged Mechanical Joint Flanged Mechanical Joint Stainless Steel 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel Full Circumferential Full Circumferential Full Circumferential Full Circumferential 304 Stainless Steel 304 Stainless Steel Carbon Steel Carbon Steel Flanged Mechanical Joint Flanged Mechanical Joint 432 (T2) 42 (T2) 304 Stainless Steel 304 Stainless Steel Full Circumferential Full Circumferential 304 Stainless Steel Carbon Steel Flanged Flanged Stainless Steel 304 Stainless Steel 304 Stainless Steel 304 Stainless Steel Outlet Seal Outlet Seal Outlet Seal Outlet Seal 304 Stainless Steel 304 Stainless Steel Carbon Steel Carbon Steel Flanged Mechanical Joint Flanged Mechanical Joint Stainless Steel 31 Stainless Steel 31 Stainless Steel 31 Stainless Steel 31 Stainless Steel Full Circumferential Full Circumferential Outlet Seal Outlet Seal Outlet Seal 31 Stainless Steel 31 Stainless Steel 31 Stainless Steel 31 Stainless Steel 31 Stainless Steel 31 Flanged 31 Mechanical Joint 31 Threaded Outlet 31 Flanged 31 Mechanical Joint 5

61 JCM Carbon Steel Fabricated Tapping Sleeve Selection Guide PRODUCT NUMBER & TYPE APPLICATION, S AND ADDITIONAL INFORMATION 411 Plain Outlet Sleeve Most economical sleeve for dry taps and connections to be made without a valve. Also excellent as a base sleeve for special sleeves. Available with reducing and size on size outlets for all types of pipe, and larger. 4 Flanged Outlet Tapping Sleeve 422 Flanged Outlet Tapping Sleeve for PVC & Steel, HDPE 413 Flanged Outlet Tapping Cross The standard sleeve for quick, economical taps on all types of pipe, standard or high pressure service. Most available of all types in standard or special sizes. Available with reducing and size on size outlets, pipe sizes and larger. Special outlets readily available. Specially designed tapping sleeve for the exact O.D. of steel pipe, IPS PVC and C-900, HDPE. Sizes 4 -. Quick economical cross for all types of pipe and larger. Outlets must be minimum of three nominal sizes smaller than run. Made similar to the 4, the sleeve length is extended to provide more pipe support. 414 Mechanical Joint Tapping Sleeve & Cross The sleeve with side and end gaskets to provide extra margin of safety on lines which are subject to problems of beam loads. Available with size on size and reducing outlets. Competitive with cast sleeves in larger and special sizes. Excellent availability. 4 Concrete Steel Cylinder Tapping Sleeve Designed to tap all types and brands of concrete steel cylinder pipe. Sleeve reinforces pipe prior to cutting of pipe reinforcing rod. Extra heavy retained gasket and easily installed gland provide a locked in, positive seal. Available with reducing outlets in pipe sizes 1 and larger. 41 Weld On Outlets Outlets, partial sleeves and complete sleeves for pipe sizes and larger with size on size and reducing outlets. These outlets are designed for steel pipe with wall thickness of 1/4 and greater. 417 Weld on Tapping Sleeve Split weld on sleeve designed to reinforce pipe to be tapped. Standard sleeve thickness 1/4. 57

62 JCM Carbon Steel Fabricated Tapping Sleeve Selection Guide PRODUCT NUMBER & TYPE APPLICATION, S AND ADDITIONAL INFORMATION 41 Threaded Outlet Tapping Sleeve For taps and connections in larger sizes of pipe (service connections, taps for air relief valves). Heavy gasket section and full sleeve offer better performance than strapped saddle, yet competitively priced. Available with IPS outlets, pipe sizes 4 and larger, outlets 3/4-4, in standard shop coat alloy bolts or epoxy coated/stainless steel bolts. 419 Fabricated Carbon Steel Tapping Sleeve with Mechanical Joint Outlet* 429 Fabricated Carbon Steel Tap Sleeve with MJ Outlet* for IPS PVC, C-900 PVC and Steel Pipe sizes 440 Line Stop Fitting New from JCM Fabricated Carbon Steel Tapping Sleeve with TRUE Mechanical Joint Outlet. Durable construction, alignment set pins and monocast mechanical joint outlet provides a competitive option for using MJ valves in lieu of tapping valves. Available in shopcoat or epoxy, standard or stainless steel hardware. Sizes 3 and larger up through outlets. JCM 429 is provided standard epoxy coated. JCM Mechanical Joint Outlets meet ANSI/AWWA C111/A21.11 Standard Dimensions Designed for use on 0 PSI piping systems, the heavier materials and extra bolting power built into these sleeves eliminate flexing and provides extra sealing capability necessary for long term performance. The heavy all stainless construction and full circumferential sealing gasket means these non-compromising sleeves will be trouble free and become a permanent part of the piping system just as the mechanical joint fittings already in use. 5

63 JCM Stainless Steel (304) Tapping Sleeve Selection Guide PRODUCT NUMBER & TYPE APPLICATION, S AND ADDITIONAL INFORMATION 43 All Stainless Steel Threaded Outlet Tapping Sleeve All stainless steel construction for taps and connections of larger sizes of pipe in corrosive, acidic environments. The 43 is available construction of either 304 or 31 Stainless Steel. Heavy gasket section and full sleeve offer better performance than strapped saddle, yet competitively priced. Available with IPS outlets, pipe sizes 4 and larger, outlets 3/ All Stainless Steel Tapping Sleeve 42 Stainless Steel Tapping Sleeve with Carbon Steel Flange The sleeve for taps requiring full circumferential seal with high safety factor. Strong stainless construction with independent bolting for higher bolt torque capabilities. Sizes Type 2 Fabricated Lug Lightweight All Stainless Steel Tapping Sleeve 42 Type 2 Fabricated Lug Lightweight Stainless Steel Tapping Sleeve with Carbon Steel Flange NEW FROM JCM Stainless steel sleeves featuring the full circumferential gasket for economical, non complex applications. Available in all stainless or stainless carbon combination. Sizes All Stainless Steel Tapping Sleeve with Outlet Seal Gasket Stainless steel tapping sleeve for large diameter pipe and high pressure applications. Stainless construction provides superior corrosion resistance for long term service. Sizes and larger. 59

64 JCM Stainless Steel (304) Tapping Sleeve Selection Guide PRODUCT NUMBER & TYPE APPLICATION, S AND ADDITIONAL INFORMATION 44 Stainless Steel Tapping Sleeve with Outlet Seal Gasket Carbon Steel Flange Stainless steel tapping sleeve for large diameter pipe and high pressure applications. Stainless construction provides superior corrosion resistance for long term service. Sizes and larger. 439 All Stainless Steel Sleeve with Mechanical Joint Outlet* 49 Stainless Steel Sleeve with Carbon Steel Mechanical Joint Outlet* 459 All Stainless Steel Sleeve with Mechanical Joint Outlet* 45 Stainless Steel Sleeve with Outlet Seal Gasket and Carbon Steel Mechanical Joint Outlet* True mechanical joint outlet tapping sleeve reduces application costs and inventory by utilizing MJ gate valve in lieu of tapping valve. All stainless steel construction provides corrosion resistance. Unique load bearing set pins transfer load and prevents movement or misalignment during or after the tap. Available in full circumferential gasket style or outlet seal gasket style. Sizes: Outlets 3 -, pipe sizes 4 and larger. JCM Mechanical Joint Outlets meet ANSI/AWWA C111/A21.11 Standard Dimensions 0

65 JCM Stainless Steel (31) Tapping Sleeve Selection Guide Tapping Sleeves featured are available constructed of ALL 31 Stainless Steel material. Four digit model numbers reflect JCM standard tapping sleeve design style and outlet configuration. Fittings are available in same O.D. ranges and outlet sizes as their corresponding model numbers indicate. These fittings are priced on application. Contact JCM Inside Sales Team for information. PRODUCT NUMBER & TYPE APPLICATION, S AND ADDITIONAL INFORMATION 43 All 31 Stainless Steel Threaded Outlet Tapping Sleeve All 31 stainless steel construction for taps and connections of larger sizes of pipe in corrosive, saltwater and extreme acidic environments. Heavy gasket section and full sleeve offer better performance than strapped saddle. Available with IPS outlets, pipe sizes 4 and larger, outlets 3/ All 31 Stainless Steel Tapping Sleeve The sleeve for taps requiring full circumferential seal with high safety factor. Strong stainless construction with independent bolting for higher bolt torque capabilities. Sizes All 31 Stainless Steel Tapping Sleeve with Outlet Seal Gasket Stainless steel tapping sleeve for large diameter pipe and high pressure applications. Stainless construction provides superior corrosion resistance for long term service. Sizes and larger. 439 All 31 Stainless Steel Sleeve with Mechanical Joint Outlet* 459 All 31 Stainless Steel Sleeve with Mechanical Joint Outlet* True mechanical joint outlet tapping sleeve reduces application costs and inventory by utilizing MJ gate valve in lieu of tapping valve. All stainless steel construction provides corrosion resistance. Unique load bearing set pins transfer load and prevents movement or misalignment during or after the tap. Available in full circumferential gasket style or outlet seal gasket style. Sizes: Outlets 3 -, pipe sizes 4 and larger. JCM Mechanical Joint Outlets meet ANSI/AWWA C111/A21.11 Standard Dimensions 1

66 JCM 4 Fabricated Steel Tapping Sleeves Built-in benefits make these heavy fabricated steel sleeves increasingly popular for making larger taps on all types of pipe. By placing the design emphasis on eliminating problems inherent with older pipe and field installations, JCM Fabricated Tapping Sleeves have taken the complexity out of tapping larger pipe. Built in range assures proper fit on more than one class of pipe - reducing inventory requirements and the chance of not having the right size sleeve. Ease of assembly eliminates extra equipment, time and specially trained personnel. Ready availability means taps can be made without long delays - even taps on special sizes of pipe - or services requiring high pressure flanges. Direct reinforcement of the pipe by the sleeve eliminates flexing or deflection of pipe opposite the tap. Less weight than heavy cast iron sleeves reduces the load on the pipe. Alignment recess for aligning sleeve and tapping valve. Test Plug 3/4 NPT (stainless steel for Epoxy Coated tapping sleeve). Corrosion resistant, high strength low alloy bolts and nuts. Optional Stainless Steel. Most important, JCM Fabricated Tapping Sleeves assure a safe dependable tap. A large gasket cross section provides a positive initial seal which increases with increases in line pressure. Broad cross section gasket set in retaining cavity. Heavy steel sleeve with built-in range reinforces pipe - eliminates deflection possibility. MATERIAL SPECIFICATIONS - JCM FABRICATED TAPPING SLEEVES 4 Body: ASTM A25 Grade C, ASTM A3 Carbon Steel or equal. Flange: Gasket: Bolts: Finish: Service Rating: ANSI/AWWA C207 Class D, ANSI 0 lb. Drilling, recessed for tapping valve per MSS-SP0. Optional flanges available upon request. Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydromechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temperature range -40 o F to 10 o F (-40 o C - 2 o C). Gasket suitable for water, salt solutions, mild acids, bases, and sewage. Optional gasket materials available. Corrosion resistant, high strength low alloy oval neck track head bolt per ASTM A242/ANSI 21.11/AWWA C111 and heavy hex nut per A53 Electro-coated, Powercron Optional stainless steel 304 or 31. Heavy coat of corrosion resistant shop coat primer. Optional Fusion bonded epoxy per ANSI/AWWA C213 2" to " Outlets: 175 PSI. Higher service rating available for specific applications and sizes. Meets or exceeds ANSI/AWWA C223 and the MSS-SP 4 Standards as applicable. 4 TAPPING SLEEVE DIMENSIONS Flange Size* A B C D* E* F* /32 3-1/2 3/ /32 4-1/2 3/ /32-1/2 3/ / 9-1/32-1/ 3/ /2 11-1/1-1/4 3/ /4 13-1/1-1/4 3/4 *For outlets 14 and larger the manufacturer of the tapping valve must be specified to assure proper alignment recess dimension. Size on size tapping sleeve requires 1/2 undersize cutter to assure proper cutter clearance and complete severance of the coupon. On nominal pipe sizes and smaller, dimension D is -1/ On nominal pipe sizes and smaller, dimensions: E=, F=5/ 2

67 JCM 4 Fabricated Carbon Steel Tapping Sleeves Flanged Outlet NOM. SLEEVE O.D. RANGE SLEEVE NUMBER X ANY OUTLET OUTLET S AVAILABLE SHOPCOAT ALLOY BOLTS EPOXY COAT ALLOY BOLTS Add (E) EPOXY COAT 304 SS BOLTS Add (ESS) APPR. WT. (LBS.) ** (SEE 422) (SEE 422) * X X X X X X X X X X X X X X X X X X X X X X X X X $ , , , , , , , , , , , ,5.00 1, , , , , ,4.00 1, , , , , , ,5.00 2, , $ , ,7.00 1, , , , ,0.00 1, , , , ,3.00 1, , ,0.00 1, , , , , , , , ,.00 1, , ,2.00 1,2.00 2, , , , , ,.00 2, ,54.00 $ , , , , , , ,5.00 1, ,5.00 2, , , , , , ,3.00 1, , , , , , ,0.00 1,0.00 1, , , , , , ,3.00 1, ,9.00 2, , , , , , ,.00 1, , , , , , *Range not available with size on size outlet. **Sizes incorporate () - 5/ bolts. Size on size outlets require a 1/2 undersize shell cutter. JCM 4 Tapping Sleeves furnished with test plugs unless otherwise specified. 3

68 JCM 422 Tapping Sleeves for PVC and Steel Pipe Sizes Built-in benefits make JCM 422 Tapping Sleeves the ideal selection for tapping and branching IPS sized PVC, Steel, High Density Polyethylene Pipe and C-900 PVC. These sleeves are designed to reinforce the pipe and assure simple, safe installation - even under the most adverse field conditions. The extra wide reinforcement and exact fit of these sleeves provide reinforcement which strengthens the PVC pipe and prevents pipe stress at the branch. Built-in Corrosion Resistance JCM 422 Tapping Sleeves are furnished standard Fusion Epoxy Coated with Hot Dipped Galvanized Bolts. Heavy Gasket Best for PVC Pipe JCM 422 Tapping Sleeves utilize a broad, heavy gasket with hydro-mechanical lip to assure a positive seal on PVC pipe with its normal expansion-contraction characteristics. Extra Wide for Support and Stability JCM Sleeves are designed extra wide for reinforcement to the main, to spread the load over a wider area and to provide stability during the tapping process. Stronger - yet lighter than Cast Sleeves Extra strength provides an extra margin of safety against damage to the sleeve in handling and installation, or due to concentrated stress. Reduced weight speeds installation and reduces the load placed on the pipe. Alignment recess for aligning sleeve and tapping valve. Stainless Steel test plug 3/4 NPT. Coated bolts and nuts. Broad cross section gasket set in retaining cavity. Ease Of Assembly Assures Proper Installation Simplicity of design permits JCM Tapping Sleeves to be installed with minimum of crew, equipment, time and experience. Epoxy coated heavy steel sleeve designed for extra wide reinforcement of the pipe. MATERIAL SPECIFICATIONS - JCM 422 Tapping Sleeve Body: ASTM A25 Grade C, ASTM A3 Carbon Steel or equal. Bolts: 5/ Corrosion resistant, high strength low alloy oval neck track head bolt per ASTM A242/ANSI/AWWA C111/A21.11 and heavy hex nut per A53 Electro-coated, Powercron Optional: Stainless Steel or 31 available. Flange: AWWA C207 Class D, ANSI 0 lb. Drilling, recessed for tapping valve MSS-SP0. Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydro mechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temp. range - 40 o F to 10 o F (-40 o C - 2 o C) Gasket suitable for water, salt solutions, mild acids, bases, and sewage. Finish: Fusion bonded epoxy coating, minimum mils thickness per ANSI/AWWA C213. Service Rating: 4" to " Outlets: 175 PSI. Higher service rating available for specific applications and sizes. Meets or exceeds the ANSI/AWWA C223 and the MSS-SP 4 Standards as applicable. 422 TAPPING SLEEVE DIMENSIONS FLANGE A B C D E F 3 9* 5 4-1/32 3-1/2 5/ 4 9* 5 5-1/32 4 5/ 5 7-1/32-1/ 5/ 5-1/ 9-1/32-1/ 5/ /2 11-1/1-1/4 14 5/ /4 13-1/1-1/4 1 5/ NOTE: 422 Tapping Sleeves require that a standard 1/2 undersize cutter be used. * & Nominal pipe sizes - dimension A is. 4

69 JCM 422 Tapping Sleeves for PVC Pipe and Steel Pipe Flanged Outlet TYPE AND CLASS OF 2 STEEL & CAST IRON ONLY PVC IPS D SDR 2, 21 SCH. 40 CLASS 200, CLASS 10 STEEL IPS S, SCHEDULE C-900 PVC ONLY AWWA C-900 ALL CLASSES NOM. 2 O.D. RANGE CATALOG NUMBER ADD OUTLET PRICE E-COAT BOLTS PRICE 304 STAINLESS STEEL BOLTS APPR. WT. (LBS.) x 2 P. O. A. P. O. A x 3 P. O. A. P. O. A x 3 x 4 x 3 x 4 x 3 x 4 x x 3 x 4 x x x 3 x 4 x x x x 3 x 4 x x x x $ , , , $ , , , , , , , x 3 P. O. A. P. O. A x 3 x 4 x 3 x 4 x x 3 x 4 x x x 3 x 4 x x x x 3 x 4 x x x x $ , , , Tapping Sleeves are furnished with test plugs unless otherwise specified. 422 Tapping Sleeves are furnished standard Fusion Epoxy Coated with Electro-coated Bolts. 422 Tapping Sleeves require that a 1/2 undersized cutter be used. $ , , , , , , , How To Order - JCM 422 Tapping Sleeves 1. Determine O.D. of pipe. 2. Select proper Sleeve O.D. range. 3. Specify catalog number and outlet size. For 422 Epoxy is standard. Add (SS) for Stainless Bolts. EXAMPLE: For PVC pipe with 0.3 O.D. with outlet, order: x. For stainless steel bolts, add (SS). 5

70 JCM 419 Fabricated Carbon Steel Tapping Sleeves Mechanical Joint Outlet JCM Mechanical Joint Outlets meet ANSI/AWWA C111/A21.11 Standard Dimensions NOM. ** SLEEVE O.D. RANGE.3 (SEE 429) (SEE 429) * SLEEVE NUMBER X ANY OUTLET OUTLET S AVAILABLE X X X X X X X X X X X X X X X X X X X X X X X X X *Not available with size on size outlets. **Sizes incorporate () - 5/ bolts. Size on size outlets require a 1/2 undersize shell cutter. JCM 419 are furnished with test plugs unless otherwise specified. SHOPCOAT ALLOY BOLTS $ , , , , , , , , , , , , ,7.00 2, , , ,.00 2, , , , , , , , , , , , , , , , , , ,45.00 EPOXY COAT ALLOY BOLTS Add (E) $ , , , , , , , , ,.00 1, , , , , , , , , ,5.00 2, , , , , , , , , , ,2.00 1,5.00 2, , , , ,4.00 1,4.00 2, ,3.00 1, , , , ,7.00 2,00.00 EPOXY COAT 304 SS BOLTS Add (ESS) $ , ,5.00 1, , , , , , , , , , , , , , , ,.00 2, , ,4.00 1,4.00 1, , , , , , , , , , , , , ,5.00 2,3.00 2, , , , , ,2.00 2,7.00 1, , , , , ,0.00 APPR. WT. (LBS.)

71 JCM 429 Fabricated Carbon Steel Tapping Sleeve Mechanical Joint Outlet JCM Mechanical Joint Outlets meet ANSI/AWWA C111/A21.11 Standard Dimensions TYPE AND CLASS OF NOM. O.D. RANGE CATALOG NUMBER ADD OUTLET PRICE EPOXY BOLTS PRICE STAINLESS STEEL 304 BOLTS APPR. WT. (LBS.) PVC IPS D SDR 2, 21 SCH. 40 CLASS 200, CLASS x 3 x 4 x3 x 4 $ $ STEEL IPS S, SCHEDULE x 3 x 4 x x 3 x 4 x x , , , , x 3 x 4 x x x ,0.00 1, , , , x 3 x 4 x x x x , , , , , ,9.00 1,5.00 1, , C-900 PVC ONLY AWWA C-900 ALL CLASSES x 3 x 4 $ $ Tapping Sleeves are: Furnished with test plugs unless otherwise specified x 3 x 4 x x 3 x 4 x x , , , , Furnished standard Fusion Epoxy Coated with Electrocoated Bolts Requires that a 1/2 undersized cutter be used x 3 x 4 x x x x 3 x 4 x x x x ,0.00 1, , , , , , , , , ,9.00 1,5.00 1, , JCM 429 FABRICATED TAPPING SLEEVE WITH MECHANICAL JOINT OUTLET OUTLET A B C D E 3 9* 5-1/ / 4 9* 5-3/ / 5-5/1.3 5/ 5-7/1.33 5/ / / / / * & Nominal pipe sizes - dimension A is. 7

72 JCM 432 All Stainless Steel Tapping Sleeve JCM 42 Stainless Steel Tapping Sleeve with Carbon Steel Flange EXTRA BOLTING POWER...The true tapping sleeve design of this sleeve incorporates replaceable, self-aligning bolts, which facilitate conversion of high bolt torques to high gasket pressure, can be torqued to 5 ft. lbs. This increases gasket sealing pressure and pressure holding capability. FULL CIRCUMFERENTIAL SEAL...The extra bolting power assures the gasket will seal the full circumference of the pipe. This provides insurance against beam breaks in size on size taps. Molded in recessed bridge plate assures even gasket pressure throughout the range of the sleeve. STRONGER YET LIGHTER THAN CAST SLEEVES...Extra strength eliminates possible cracking of the sleeve or flange. Reduced weight speeds installation and reduces the load placed on the pipe. EXTRA WIDE FOR SUPPORT AND STABILITY...Extra width and heavier neck and body material provide extra reinforcement of the outlet and extra stability during the tapping process. JCM All stainless construction provides extra corrosion resistance. The stainless steel flange, outlet and body join as one unit of similar metals for highest structural strength and corrosion resistance. JCM 42 - Stainless steel body/neck construction joins with a strong, economical carbon steel flange. Coated steel flange is to ANSI/AWWA C207, Class D standard with recess for tapping alignment. Sleeve pressure rating with standard stainless steel flange, Outlets 2 - : Sleeves 4" - 24" nominal pipe sizes:175 PSI working pressure, per ANSI/AWWA C22 Class SD Sleeve pressure rating with optional ANSI stainless steel flange, Outlets 2 - : Sleeves 4" - " nominal pipe sizes: 250 PSI working pressure, hydrostatic test pressure of 300 PSI. Sleeves 14" - 24" nominal pipe sizes: 200 PSI working pressure, hydrostatic test pressure of 250 PSI MATERIAL SPECIFICATIONS - JCM 432 and 42 TAPPING SLEEVES: Body: Stainless Steel, 1- Type 304 per ASTM A240 Bolts: Stainless Steel, 1- Type 304 Branch Outlet: Schedule Stainless Steel Pipe Gasket: Full circumferential gasket compounded for use with water, salt solutions, mild acids, bases and sewage. 432 Flange: Stainless Steel 1- Type 304 per ANSI/AWWA C22 Class SD. ANSI 0lb. Drilling, recessed for tapping valve per MSS-SP Flange: ANSI/AWWA C207 Class D, ANSI 0lb. Drilling, recessed for tapping valve per MSS-SP0, coated for corrosion resistance. Meets or exceeds ANSI/AWWA C223 and MSS-SP4 Standards as applicable. JCM 432 & 42 STAINLESS STEEL TAPPING SLEEVE DIMENSIONS FLANGE A B C D E F / / / / / / 5 7-1/ / / / /2 11-1/ / /4 13-1/ / Patent #4,70,373

73 Stainless Steel Tapping Sleeve - Full Circumferential Gasket - Flanged Outlet JCM 432 Stainless Steel Flanged Outlet JCM 42 Carbon Steel Flanged Outlet NOM SLEEVE O.D. RANGE SLEEVE NUMBER OUTLET S MODEL 432 STAINLESS STEEL FLANGE MODEL 42 CARBON STEEL FLANGE HOW TO ORDER 1. Determine O.D. of pipe. 2. Select proper Sleeve O.D. range. 3. Specify catalog number and outlet size. EXAMPLE: For PVC pipe with 0.3 O.D. with outlet, order: x. For carbon steel flange, order: x X 2 X 2 X X 2 X X 2 X X X 2 X X X X 2 X X X X 2 X X X X X X $ 1, , , , , , , , , , , , ,5.00 1,5.00 1,5.00 1, , , , , , , , , ,.00 2,2.00 2,2.00 2,2.00 2,4.00 2, , ,3.00 2, , , , , , , , , , , , , , , , , ,2.00 3,3.00 $ , ,0.00 1,0.00 1,0.00 1, , , , , , , ,1.00 1, , , , ,7.00 2, , , , , , , , , , , , , , , , , , ,9.00 3, , , , , , , , , WIDTH OF SLEEVE NUMBER OF BOLTS +NOTE: THIS NOT AVAILABLE WITH A ON OUTLET. ++NOTE: RECOMMENDED FOR IPS PVC, STEEL, C-900 PVC, DUCTILE IRON DIAMETERS. NOT RECOMMENDED FOR PIT CAST IRON. FOR OVERD OR PIT CAST IRON, SEE NEXT LARGER RANGE. For larger sizes and outlets, see JCM 4 Tapping Sleeve or JCM 452 All Stainless Steel Tapping Sleeve APPR. WT. EA. LBS

74 New From JCM Industries JCM 432 Type 2 Fabricated Lug Lightweight All Stainless Steel Tapping Sleeve JCM 42 Type 2 Fabricated Lug Lightweight Stainless Steel Carbon Steel Flange Tapping Sleeve Responding to industry requests for an advanced, economical fabricated lug tapping sleeve, JCM introduces our New JCM 432 & 42 Type 2 Fabricated Lug Stainless Steel Tapping Sleeve. Using the popular structure of fabricated stainless steel bolting system with lifter plate, the JCM 432 & 42 Type 2 provides a reliable, cost-effective solution for tapping pipe. Heavy Stainless Steel Fabricated Lug System - eases installation and assists alignment of fasteners. Welded in place bolting studs reduces loose parts. Full Circumferential Seal...The substantial, stainless steel body assures the gasket is sealed on the full circumference of the pipe. This provides insurance against beam breaks in size on size taps. Molded in recessed bridge plate assures even gasket pressure throughout the range of the sleeve. Lighter Than Cast Sleeves...Robust stainless steel construction eliminates possible cracking of the sleeve or flange. Reduced weight speeds installation and reduces the load placed on the pipe. Increased Width Provides Support And Stability...Wide body and heavy neck material provides reinforcement of the outlet and extra stability during the tapping process. JCM 432 Type 2 - All stainless construction provides extra corrosion resistance. The stainless steel flange, outlet and body join as one unit of similar metals for highest structural strength and corrosion resistance. JCM 42 Type 2 - Stainless body construction provides extra corrosion resistance. The carbon steel flange, offers an economical solution to applications. MATERIAL SPECIFICATIONS - JCM 432 & 42 Type 2 Fabricated Lug Lightweight Tapping Sleeves: Body: Stainless Steel, 1- Type 304 per ASTM A240 Hardware: Stainless Steel, 1- Type 304 Branch Outlet: Schedule Stainless Steel Pipe. For size on size taps, outlets 11 gauge Stainless Steel Pipe Gasket: Full circumferential gasket compounded for use with water, salt solutions, mild acids, bases and sewage. 432 Type 2 Flange: Stainless Steel, 1- Type 304, per ANSI/AWWA C22 Class SD ANSI 0lb. Drilling, recessed for tapping valve per MSS-SP0. 42 Type 2 Flange: ANSI/AWWA C207 Class D Flange, Carbon Steel, recessed for tapping valve per MSS-SP0, coated for corrosion resistance. JCM Tapping Sleeves meet or exceed the ANSI/AWWA C223 and the MSS-SP 4 Standards as applicable. HOW TO ORDER - JCM 432 Type 2 and JCM 42 Type 2 Tapping Sleeves 1. Determine O.D. of pipe. 2. Select proper sleeve O.D. range. 3. Specify SLEEVE number - outlet size and T2. Example: For PVC pipe with.3 O.D. with outlet, order: x T2, for carbon flange order x T2 70

75 Stainless Steel Tapping Sleeve - Full Circumferential Gasket - Flanged Outlet JCM 432 Type 2 Fabricated Lug Lightweight Stainless Steel Flanged Outlet JCM 42 Type 2 Fabricated Lug Lightweight Stainless Steel Carbon Steel Flange Outlet NOM. x Size on Size x Size on Size 14 1 SLEEVE O.D. RANGE INDICATE MODEL NUMBER 432 T2 STAINLESS FLANGE 42 T2 CARBON FLANGE CATALOG NUMBER OUTLET S STAINLESS STEEL FLANGE 432 T2 CARBON STEEL FLANGE 42 T2 WIDTH OF SLEEVE NUMBER OF BOLTS APPR. WT. EA. LBS T2 $ 1, $ X * T2 1, , T2 X T2 1, , ,9.00 * T2 1,1.00 1, T2 X T2 T2 X * T2 T2 X T2 T2 X T2 X * T2 T2 X T2 T2 X T2 X T2 T2 X T2 T2 X T2 X T2 1, , , , , , , , , ,3.00 2, , , , , , , , , , , , , , , , , , , , , , , ,2.00 2, , ,03.00 *Size on size sleeves require 1/2 undersized cutter. For 2 or 3 outlets, other ranges or special ranges, see JCM 432 or 42 Tapping Sleeves For larger sizes and outlets, see JCM 452 or 44 Tapping Sleeves JCM 432/42 TYPE 2 STAINLESS STEEL TAPPING SLEEVE DIMENSIONS FLANGE A B C D E F / / 4-1/2 7-1/ / / / /2 11-1/ / /4 13-1/ / DIMENSIONS for ON SLEEVES ONLY JCM 432/42 TYPE 2 STAINLESS STEEL TAPPING SLEEVES (Requires 1/2 undersized cutter) FLANGE A B C D E F / / 4-1/2 7-1/ / / / /2 11-1/ / /4 13-1/ / 71

76 JCM Mechanical Joint Outlet Tapping Sleeves Now Available, JCM Mechanical Joint Outlet Tapping Sleeves Outlets 3 - Reduce Application Costs Reduce Valve Inventory Available Immediately Provides Load Bearing Set Pins True Mechanical Joint Outlet - one cast piece creates a strong unit. No glued or attached parts to separate or cause misalignment. JCM Mechanical Joint Outlets meet ANSI/AWWA C111/A21.11 Standard Dimensions. Load Bearing Set Pins - JCM Tapping Sleeves with MJ Outlet connections come furnished with load bearing set pins on the MJ outlet gland. After valve installation, the set pins are tightened against the face of the MJ valve flange, transferring any load and preventing movement or misalignment during or after the tap. Strong pipe outlet - heavy duty neck outlet provides stability and a full size cutter bore. Standard lengths accommodate industry common tapping machine travel. Consistent Inside Diameter Outlet - through the MJ flange outlet and through the pipe neck outlet. No modifications, changes or alterations that can interfere with cutter travel. Quality Workmanship - JCM Tapping Sleeves with Mechanical Joint Outlets are manufactured of certifiable materials and are fabricated to the JCM standard quality recognized in the industry. JCM 439 AND 49 MATERIAL SPECIFICATIONS: Body: Stainless Steel, 1- Type 304 per ASTM A240 Bolts: Stainless Steel, 1- Type 304 Branch Outlet: Heavy Stainless Steel Pipe Gasket: Full circumferential Virgin Styrene-Butadiene Rubber (SBR) - Compounded for use with water, salt solutions, mild acids and bases per ASTM D Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). Optional: EPDM available. For applications on high temperatures or chemical pipelines, contact JCM Industries Technical Services. 439 MJ Outlet: CF Cast Stainless Steel - equivalent to 1- Type 304 Stainless Steel meets ANSI/AWWA C111/A21.11 Standard Dimensions. 49 MJ Outlet: Carbon Steel meets AWWA C-111/ANSI Standard Dimensions, coated for corrosion resistance. Rated for 250 PSI working pressure/300 PSI test pressure Meets or exceeds ANSI/AWWA C223 and the MSS-SP 4 Standards as applicable.. JCM 439 & 49 TAPPING SLEEVE DIMENSIONS OUTLET A B C D E 3 5-1/ / 4 5-3/ / 5-5/1.3 5/ / / / / / / 72

77 Stainless Steel Tapping Sleeve - Full Circumferential Gasket - Mechanical Joint Outlet JCM 439 Stainless Steel Mechanical Joint Outlet JCM 49 Carbon Steel Mechanical Joint Outlet JCM Mechanical Joint Outlets meet ANSI/AWWA C111/A21.11 Standard Dimensions NOM NOTE: ++NOTE: FULL CIRCUMFERENTIAL SEAL EXTRA WIDTH EXTRA BOLTING POWER SLEEVE O.D. RANGE SLEEVE NUMBER OUTLET S X X X X X X X X X X X X X X X X MODEL 439 STAINLESS STEEL MJ OUTLET $ 1, , , , , , , , , , , , , ,.00 1, , , , , ,1.00 2, , , , , , , , ,1.00 3, , ,4.00 2, , ,1.00 3, , , , , , , , , MODEL 49 CARBON STEEL MJ OUTLET $ 1, , , , , ,4.00 1,4.00 1, , ,9.00 1,9.00 1,7.00 2,4.00 3,5.00 1, , , , , ,5.00 2, , , , ,.00 4, , , ,5.00 3, , ,2.00 2, , ,5.00 3,5.00 2,9.00 2,9.00 3, , , , , , WIDTH OF SLEEVE Not available with a size on size outlet. Recommended for IPS PVC, Steel, C-900 PVC, Ductile Iron Pipe diameters. Not recommended for pit cast iron pipe. For oversized or Pit Cast Iron pipe, see next larger range NUMBER OF BOLTS APPR. WT. (LBS.)

78 JCM Stainless Steel Tapping Sleeves with Outlet Seal Gasket Available With Flanged Outlet or Mechanical Joint Outlet* Stainless Steel or Carbon Steel Rugged and Heavy Duty Stainless Tapping Sleeves Offer Extra Benefits. Heavy Duty Design... Heavier construction and thicker metal provide extra reinforcement of the pipe and outlet. The extra bolting power and body thickness eliminate problems inherent with light weight sleeves. High Pressure Capability - High Safety Factor... The broad, heavy hydromechanical gasket provides for high working pressure applications. They are also ideal for critical problem prone taps such as pump and lift stations, large diameter mains and large outlets. Large Sizes - High Pressure... The premier sleeve for larger sizes of ductile iron, PVC, PE and steel pipe, these sleeves are capable of working pressure of 1.5 times the valves commonly used with these types of pipe. Higher pressure sleeves are available on request. Stronger - Yet Lighter Than Cast Sleeves... Reduced weight aids in installation and handling as well as reducing load on the pipe. Extra Wide for Support and Stability... Extra width and heavier neck and body material provide extra reinforcement of the outlet and extra stability during the tapping process. Affordable... These stainless sleeves are surprisingly affordable in all sizes. Larger sleeves are priced less than ductile iron mechanical joint sleeves which offer less corrosion resistance and pressure capability. JCM Stainless Tapping Sleeve Flanged Outlet MATERIAL SPECIFICATIONS JCM Stainless Tapping Sleeve Mechanical Joint Outlet Body: Stainless Steel, 1- Type 304 per ASTM A240. Optional 31 Stainless Steel. Bolts: Stainless Steel, 1- Type 304. Optional 31 Stainless Steel. Branch Outlet: Heavy Stainless Steel Pipe. Optional 31 Stainless Steel. Gasket: Gasket compounded for use water, salt solutions, mild acids, bases and sewage per ASTM D Flange: Stainless Steel 1- Type 304 Stainless Steel. Per ANSI/AWWA Standard C22, ANSI 0lb. Drilling, recessed for tapping valve per MSS-SP 0. Optional 31 Stainless Steel. 44 Flange: ANSI/AWWA C207 Class D, ANSI 0lb. Drilling, recessed for tapping valve per MSS-SP0, coated for corrosion resistance. 459 MJ Outlet: Stainless Steel1- Type 304 meets AWWA C111/ANSI Standard Dimensions. Optional 31 Stainless Steel. 45 MJ Outlet: Carbon Steel meets AWWA C111/ANSI Standard Dimensions, coated for corrosion resistance. Meets or exceeds the ANSI/AWWA C223 and the MSS-SP 4 Standards as applicable. 74

79 Stainless Steel Tapping Sleeves - Outlet Seal Gasket - Flanged Outlet JCM 452 Stainless Steel Flanged Outlet JCM 44 Carbon Steel Flanged Outlet OUTLET SEAL GASKET HIGH PRESSURE CAPABILITY HIGH SAFETY FACTOR LARGE S NOM SLEEVE O.D. RANGE * SLEEVE NUMBER * OUTLET S X X X X X X X X X X X X X X X X X X X X X X X X X *These sizes not available with size on size outlets. JCM 452/44 Tapping Sleeves furnished with test plugs unless otherwise specified. For size on size outlets a 1/2 undersize shell cutter is required. Larger Sleeve Ranges and Outlets Available. MODEL 452 STAINLESS STEEL FLANGE $ 1, , , , , , , ,5.00 2, ,5.00 1,5.00 1, , , , , ,9.00 2,0.00 2, ,50.00 P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM MODEL 44 CARBON STEEL FLANGE $ 1,0.00 1,0.00 1,4.00 1,4.00 1, , , , , , , , , , , , ,5.00 1,5.00 2, , P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM APPROX. WEIGHT

80 Stainless Steel Tapping Sleeves - Outlet Seal Gasket - Mechanical Joint Outlet JCM 459 Stainless Steel Mechanical Joint Outlet JCM 45 Carbon Steel Mechanical Joint Outlet JCM Mechanical Joint Outlets meet ANSI/AWWA C111/A21.11 Standard Dimensions NOM SLEEVE O.D. RANGE ** SLEEVE NUMBER OUTLET S X X X X X X X X X X X X X X X X X X X X X X X X X MODEL 459 STAINLESS STEEL MJ OUTLET $ 1, , ,3.00 1,3.00 1, , , , , , , , , ,5.00 1,7.00 1,7.00 1, , , ,79.00 P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM MODEL 45 CARBON STEEL MJ OUTLET $ 1, , , , , , , , ,5.00 1, , , , , , , , , , , P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM P. O. A. Call JCM **These sizes not available with size on size outlets. JCM 459/45 Tapping Sleeves furnished with test plugs unless otherwise specified. For size on size outlets a 1/2 undersize shell cutter is required. AVAILABLE - 14 & 1 MJ OUTLETS IN STAINLESS STEEL PRICE ON APPLICATION - CONTACT JCM INSIDE SALES TEAM APPROX. WEIGHT

81 JCM Fabricated Weld On Tapping Outlets Carbon Steel and All Stainless Steel (304 & 31) Construction Available JCM Weld On Fittings are fabricated in compliance with the AWWA M11 Manual for Steel Pipe - Fittings Design, Appurtenances - other modifications available. Outlets, partial sleeves and complete sleeves are readily available for steel pipe 4 and larger with size on size and reducing outlets. Outlets and partial sleeves are also available for tank and bulkhead use. Various configurations of this design are available. Featured below are the most popular. Nominal Pipe Size Catalog Number (Pipe O.D.) Outlet Sizes x 3 x 4 x 3 x 4 x 41 Type 2 Half-Wrapper 03 x 3 x 4 x x 417 Type 1 75 x 3 x 4 x x x 41 Type 2 Collar 75 x 3 x 4 x x x x 41 Type 3 Nozzle 417 Type 2 Weld On fittings are priced on application, contact JCM Sales Team or Larger sizes available upon request. Furnish fitting type and pipe O.D. Sleeves are fabricated to the exact O.D. of the pipe. How To Order: 1. Determine nominal pipe O.D. and outlet size. 2. Determine sleeve type required. 3. Specify sleeve type, pipe O.D. and outlet size. Example: For Steel Pipe with.3 O.D. with flanged outlet, full sleeve style, order: x Type 1 Standard flange furnished ANSI/AWWA C207 Class D, ANSI 0lb. Drilling, recessed for tapping valve MSS-SP0. Available Upon Request ANSI Flanges, Weld Neck Flanges and others Outlets Beveled for Welding Crotch-Plate (Wye Branch Design) All Stainless Steel Fabrications (304, 31) Test Ports Custom Pipe Diameters 77

82 JCM INDUSTRIES, INC, General Application Information Fittings and Fabrications for High Density Polyethylene Pipe JCM Products for repairing, connecting and tapping Polyethylene pipe have been tested and evaluated for their suitability and design capability. In each case JCM products have performed satisfactorily in respect to their design application. Test criteria range from short-term for special applications to long-term 00 hour evaluations with the most common applications. Temperature and pressure cycles are also incorporated to fully address the pipe characteristics and full range of occurrences. Special monitoring equipment is utilized to produce accurate test data and for historical reference. High Density Polyethylene Pipe (HDPE) has several unique characteristics which are taken into consideration in the following guidelines. The disregard of these guidelines and/or the installation instructions supplied with each fitting may cause unsatisfactory results and void the expressed product warranty. HDPE Pipe considered for use must be manufactured to the recommendations set forth in the ANSI/AWWA Standard C90 and complies with criteria in reference to size. HDPE has a high coefficient of thermal expansion and contraction along with a low modulus of elasticity. This sensitivity to pressure and temperature causes HDPE to expand and contract more than traditional water and sewer piping materials. The potential pipe expansion or contraction must be considered when assembling bolt on fittings. HDPE will relax ( creep ) at lower stress levels than other piping materials. Due to these special characteristics, the following parameters should be adhered to when utilizing JCM products for HDPE (ANSI/AWWA C901, C90). HDPE and bolt-on fitting connections are vulnerable to forces experienced with expansion/contraction of the pipe and require special consideration. Restraint must be considered when joining plain end pipe to ensure against pipe pull out. HDPE is manufactured with a smooth pipe wall surface resulting in a low coefficient of friction that can enable fittings to slide, shift, move, rotate and/or travel on the pipe after installation. JCM products are limited in the tolerance of axial movement of the pipe. JCM products for HDPE are designed for underground pressurized fluid service and are pressure rated to match the pipe SDR pressure rating or with a maximum service rating of 0 PSI (Temperature 35 o - 75 o F/Maximum test pressure limited to rated pipe pressure or fitting, whichever is lower). For above ground applications, contact JCM Industries Technical Services. Pipe stiffeners must be used when joining, or connecting to, HDPE. Pipe systems must be engineered to prevent movement causing fittings to slide or rotate on the pipe. Cutting HDPE can cause the pipe to ovate or neck down and become egg shaped. This pipe movement can interfere with the assembly of bolt on fittings. Thirty years of successful performance has been one of the most stringent proving grounds for JCM products and their application with Polyethylene Pipe. Generally speaking, most common potable water pressure applications utilize HDPE SDR 17 through 11. For applications on thinner wall pipe, special applications, higher pressure ratings and product usage recommendations, please contact JCM. Note: JCM recommends fusion joints as a primary method of connection. When correctly implemented, fused joints are self-restraining and leak proof. In some instances conditions are not conducive to properly fuse the joint per manufacturers recommendations. Mechanical fittings to join or repair HDPE are a secondary and limiting choice. The information included on this page is provided to address the known factors when repairing, joining or tapping HDPE with mechanical fittings. Effective 07/30/0 7

83 JCM Fittings and Fabrications for High Density Polyethylene Pipe JCM Products for tapping PE pipe have been tested and evaluated for their suitability and design capability. In each case JCM products have performed satisfactorily in respect to their design application. High Density Polyethylene Pipe (HDPE) has several unique characteristics which must be taken into consideration. HDPE has a high coefficient of thermal expansion and a low modulus of elasticity. This sensitivity to pressure and temperature causes HDPE to expand and contract more than traditional water and sewer piping materials. HDPE will also relax ( creep ) at lower stress levels than other piping materials. In consideration of the unique characteristics, JCM provides fabricated tapping fittings that are sized specifically with applicable ranges for HDPE. These sleeves are featured on the following pages. JCM Outlet Seal Threaded Outlet Tapping Sleeves for HDPE Pipe Model Numbers 41, 43 Ranges and Part Numbers provided specifically for High Density Polyethylene Pipe. NOM SLEEVE O.D. RANGE SLEEVE NUMBER X ANY OUTLET OUTLET 3/ /4 1-1/ /2 3 4 ORDER CODE IP How to Order: 1. Determine outside diameter of HDPE Pipe (IPS, DI), provide SDR#. 2. Select sleeve material (carbon, stainless) and proper size outlet. 3. Select model number (41, 43). For full product description see JCM Catalog. 4. Select proper sleeve O.D. Range and sleeve number. 5. Specify Model Number-Sleeve Number x Outlet Size Example: For 24 HDPE SDR 17 IPS O.D. pipe, with 2 threaded outlet, carbon steel, order: x 14IP Example: For 24 HDPE SDR 17 IPS O.D. Pipe, with 2 threaded outlet, All Stainless Steel, order: x 14IP For sizes not listed, contact JCM Inside Sales Team at or

84 JCM Outlet Seal Tapping Sleeves for HDPE Pipe Model Numbers 4, 419, 452, 44, 459, 45 Ranges and Part Numbers provided specifically for High Density Polyethylene Pipe For sizes not listed, contact JCM Inside Sales Team at or NOM. SLEEVE O.D. RANGE SLEEVE NUMBER X ANY OUTLET OUTLET S AVAILABLE X 2 X X X X 2 X X X X 2 X X X X 2 X X X X 2 X X X X 2 X X X X 2 X X X X 2 X X X 0

85 JCM Outlet Seal Tapping Sleeves for HDPE Pipe Model Numbers 4, 419, 452, 454, 459, 45 Ranges and Part Numbers provided specifically for High Density Polyethylene Pipe. For other types of pipe see JCM General Products Directory NOM. SLEEVE O.D. RANGE SLEEVE NUMBER X ANY OUTLET OUTLET S AVAILABLE How to Order: 1. Determine outside diameter of HDPE Pipe (IPS, DI), provide SDR#. 2. Select sleeve material (carbon, stainless) and proper outlet material & type (flange, mechanical joint). 3. Select model number. For full product description, see JCM Catalog. 4. Select proper sleeve O.D. Range and sleeve number. 5. Specify Model Number-Sleeve Number x Outlet Size. Example: For 24 HDPE SDR 17 IPS O.D. pipe, with flanged outlet, carbon steel, order: x Example: For 24 HDPE SDR 17 IPS O.D. Pipe, with mechanical joint outlet, All Stainless Steel, order: x X 2 X X X X 2 X X X X 2 X X X X 2 X X X X 2 X X X 2 Mechanical Joint Outlets Not Available 14 and Larger Flanged Outlets Available. Tapping valve information must be specified to assure proper alignment recess dimension. 14 & 1 Mechanical Joint Outlets Available. Stainless Steel Only (Model 459) For size on size outlets a 1/2 undersize shell cutter is required. JCM Flanged and Mechanical Joint Outlet Tapping Sleeves furnished with test plugs unless otherwise specified. For sizes not listed, contact JCM Inside Sales Team at or

86 JCM 440 Line Stop Sleeves 440 Type Material Specifications All 440 Line Stop Fitting Types: Line Stop Plug: Plug O-Ring: Blind Flange: Blind Flange Gasket: Push Plug/Pin Hardware: Ductile Iron per ASTM A53 Nitrile (NBR, Buna-N) Rubber - Gasket temperature range -40 o to 10 o F (-40 o C to 2 o C). 0#, ASTM A3 Carbon Steel, Epoxy Coated Styrene-Butadiene Rubber (SBR) - Compounded for use with water, salt solutions, mild acids and bases. Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). Per ASTM F9 440 Type 1 Body: Stainless Steel, 1- Type 304 per ASTM A Type 11 Flange: ASME/ANSI 0 lb. Drilling, B1.1 Class 5 Compatible, Type 304 Stainless Steel, recess for tapping valve MSS-SP0 Bolts: Stainless Steel, 1- Type 304 Gasket: Full circumferential Virgin Styrene-Butadiene Rubber (SBR) - Compounded for use with water, salt solutions, mild acids and bases per ASTM D2000. Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). 440 Type 2 Body: ASTM A25 Grade C or A3 Carbon Steel or Equal 440 Type Flange: ASME/ANSI 0 lb. Drilling, B1.1 Class 5 Compatible, Carbon Steel, recess for tapping valve MSS-SP0 Bolts: ASTM A242 corrosion resistant high strength, low alloy (ANSI/AWWA C111/A21.11). Optional Stainless Steel 1- Type 304 or 31 available. Finish: Heavy coat of corrosion resistant shop coat primer. Optional fusion applied Epoxy Coating per ANSI/AWWA C213 Standard. Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydro mechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temperature range -40 o to 10 o F (-40 o - 2 o C). Gasket suitable for water, salt solutions, mild acids, bases, and sewage. 440 Type 3 Body: Stainless Steel, 1- Type 304 per ASTM A Type 13 Flange: ASME/ANSI 0 lb. Drilling, B1.1 Class 5 Compatible, Type 304 Stainless Steel, recess for tapping valve MSS-SP0 Bolts: Stainless Steel, 1- Type 304 Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydro mechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temperature range -40 o to 10 o F (-40 o - 2 o C). Gasket suitable for water, salt solutions, mild acids, bases, and sewage. 440 Type 4 Body: Stainless Steel, 1- Type 304 per ASTM A Type 14 Flange: ASME/ANSI 0 lb. Drilling, B1.1 Class 5 Compatible, Carbon Steel, recess for tapping valve MSS-SP0, shop coat for corrosion resistance. Bolts: Stainless Steel, 1- Type 304 Gasket: Full circumferential Virgin Styrene-Butadiene Rubber (SBR) - Compounded for use with water, salt solutions, mild acids and bases per ASTM D2000. Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). 440 Type 5 Body: Stainless Steel, 1- Type 304 per ASTM A Type Flange: ASME/ANSI 0 lb. Drilling, B1.1 Class 5 Compatible, Carbon Steel, recess for tapping valve MSS-SP0, shop coat for corrosion resistance. Bolts: Stainless Steel, 1- Type 304 Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydro mechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temperature range -40 o to 10 o F (-40 o - 2 o C). Gasket suitable for water, salt solutions, mild acids, bases, and sewage. U.S. Patent No

87 JCM Line Stop Fittings with Full Circumferential Gasket The 440 Line Stop Sleeve Family offers the sleeve you need for the application. As the NUMBER ONE choice of contractors, JCM continues to meet the challenge of field application requirements with product design, material selection and delivery expectations. JCM 440 Line Stop Family continues to grow with advanced designs, material combinations and numerous options to fit your application. JCM s patented Line Stop Sleeves adapt to popular line stop machines and can be rated up to 250 PSI. JCM Line Stop Sleeves with Full Circumferential Gasket are designed for applications in which the pipe is susceptible to breaking during or after the tapping/line stop procedure. JCM 440 Line Stops with Full Circumferential Gasket are offered in two fabricated material combinations: All Stainless Steel or Stainless Steel with Carbon Steel Outlet. Both sleeves are offered with either the threaded plug design or the push plug design. JCM 440 Line Stop Sleeves with Full Circumferential Gasket Material Specifications Line Stop Plug: Ductile Iron per ASTM A53 Plug O-Ring: Nitrile (NBR, Buna-N) Rubber - Gasket temperature range -40 o to 10 o F (-40 o C to 2 o C). Blind Flange: 0#, ASTM A3 Carbon Steel, Epoxy Coated Blind Flange Gasket: Styrene-Butadiene Rubber (SBR) - Compounded for use with water, salt solutions, mild acids and bases. Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). Push Plug/Pin Hardware: Per ASTM F9 Bolts: Stainless Steel, 1- Type 304 or 31 Body: Stainless Steel, 1- Type 304 per ASTM A240. Body Gasket: Full circumferential virgin Styrene-Butadiene Rubber (SBR) - Compounded for use with water, salt solutions, mild acids and bases per ASTM D2000. Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C) Line Stop Sleeve Outlet Material Options for Stainless Steel Full Circumferential Gasket Sleeve JCM 440 Type 1 - All Stainless Steel with Full Circumferential Gasket - Threaded Plug JCM 440 Type 11 - All Stainless Steel with Full Circumferential Gasket - Push Plug/Pin Outlet Material: ASME/ANSI 0 lb. Drilling, B1.1 Class 5 Compatible, Type 304 Stainless Steel, recess for tapping valve MSS-SP0 JCM 440 Type 4 - Stainless Steel Carbon Steel Outlet Full Circumferential Gasket - Threaded Plug JCM 440 Type 14 - Stainless Steel Carbon Steel Outlet Full Circumferential Gasket - Push Plug/Pin Outlet Material: ASME/ANSI 0 lb. Drilling, B1.1 Class 5 Compatible, Carbon Steel, recess for tapping valve MSS-SP0, shop coated for corrosion resistance. Optional: Fusion applied epoxy coating. 1. Determine O.D. of pipe 2. Select proper catalog number 3. Select proper outlet size 4. Select proper outlet plug type code (threaded or push/pin) 5. Add Outlet Type Code (T1 or T11) Example: For Ductile Iron with.90 O.D. with threaded plug, order: T1 Push Plug/Pin Configuration Threaded Plug Configuration 3

88 JCM 440 Type 1 Line Stop with Full Circumferential Gasket - Threaded Plug JCM 440 Type 11 Line Stop with Full Circumferential Gasket - Push Plug/Pin All Stainless Steel Construction - Full Circumferential Gasket NOMINAL 4 Recommended for: cast iron, ductile iron, asbestos cement, PVC and other types of pipe susceptible to breakage. SLEEVE O.D. RANGE CATALOG NUMBER X OUTLET X PLUG CODE OUTLET x 4 x 4 x x x x x x x THREADED PLUG TYPE CODE T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 T1 PUSH PLUG/PIN TYPE CODE T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 T11 APPROX. WEIGHT (LBS.) JCM 440 Type 4 Line Stop Full Circumferential Gasket - Threaded Plug JCM 440 Type 14 Line Stop Full Circumferential Gasket - Push Plug/Pin Stainless Steel Body - Carbon Steel Outlet - Full Circumferential Gasket NOMINAL 4 Recommended for: cast iron, ductile iron, asbestos cement, PVC and other types of pipe susceptible to breakage. SLEEVE O.D. RANGE CATALOG NUMBER X OUTLET X PLUG CODE Other sleeve ranges and outlet sizes available upon request. U.S. Patent No.,17,929 OUTLET x 4 x 4 x x x x x x x THREADED PLUG TYPE CODE T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 T4 PUSH PLUG/PIN TYPE CODE T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 T14 APPROX. WEIGHT (LBS.)

89 JCM Line Stop Fittings with Outlet Seal Gasket The JCM 440 Line Stop Fitting with Outlet Seal Gasket are fabricated for types of pipe that are not susceptible to breaking and for large diameter pipelines. JCM offers the broadest selection of material combination in the industry and can meet the exacting standards of your application. Fabrication materials include: carbon steel, carbon/stainless and all stainless steel. JCM patented Line Stop Sleeves adapt to popular line stop machines and can be rated up to 250 PSI. Other designs available: weld-on outlets and sleeves, mechanical joint sleeves, specialty configurations. All combinations are available with threaded plug design or push plug design. 440 Line Stop Sleeve Outlet Gasket Sleeve Description JCM 440 Type 2 - Carbon Steel Construction - Outlet Seal Gasket - Threaded Plug JCM 440 Type - Carbon Steel Construction - Outlet Seal Gasket - Push Plug/pin Pipe Sizes: 4-20 and larger Optional epoxy coating per ANSI/AWWA Standard C213 Optional Hardware 304 or 31 stainless Optional gasket materials. Recommended for: cast iron, ductile iron, C-900/C905 PVC, HDPE, steel JCM 440 Type 3 - All Stainless Steel Construction - Outlet Seal Gasket - Threaded Plug JCM 440 Type 13 - All Stainless Steel Construction - Outlet Seal Gasket - Push Plug Pin Pipe Sizes: 4-20 and larger Optional gasket materials Recommended for: cast iron, ductile iron, C-900/C905 PVC, HDPE, steel JCM 440 Type 5 - Stainless Steel Body - Carbon Steel Outlet - Outlet Seal Gasket - Threaded Plug JCM 440 Type - Stainless Steel Body - Carbon Steel Outlet - Outlet Seal Gasket - Push Plug Pin Pipe Sizes: 4-20 and larger Optional gasket materials Recommended for: cast iron, ductile iron, C-900/C905 PVC, HDPE, steel How To Order: 1. Determine O.D. of pipe 2. Select proper catalog number 3. Select proper outlet size 4. Select proper outlet plug type code (threaded or push/pin) 5. Add Outlet Type Code (T2 or T) Example: For Ductile Iron with.90 O.D. with threaded plug, order: T2 Other sleeve size and outlet size combinations available upon request. Push Plug/Pin Configuration Threaded Plug Configuration 5

90 Line Stop Plug: Plug O-Ring: Blind Flange: Blind Flange Gasket: Push Plug/Pins: Outlet Gasket: Body: Flange: Bolts: JCM 440 Type 2 - Carbon Steel - Outlet Seal Gasket - Threaded Plug JCM 440 Type - Carbon Steel - Outlet Seal Gasket - Push Plug/Pin Furnished standard shopcoat with alloy hardware Ductile Iron per ASTM A53 Nitrile (NBR, Buna-N) Rubber - Gasket temperature range -40 o to 10 o F (-40 o C to 2 o C). 0#, ASTM A3 Carbon Steel, Epoxy Coated Styrene-Butadiene Rubber (SBR) - for use with water, salt solutions, mild acids and bases. Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). Per ASTM F9 Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydromechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temperature range -40 o to 10 o F (-40 o - 2 o C). Gasket suitable for water, salt solutions, mild acids, bases, and sewage. ASTM A25 Grade C or A3 Carbon Steel or Equal ASME/ANSI 0 lb. Drilling, B1.1 Class 5 Compatible, Carbon Steel Flange recess for tapping valve MSS-SP0 ASTM A242 corrosion resistant high strength, low alloy (per ANSI/AWWA C111/A21.11). Optional Stainless Steel 1- Type 304 or 31 available. NOMINAL JCM 440 Type 2 - Carbon Steel - Outlet Seal Gasket - Threaded Plug JCM 440 Type - Carbon Steel - Outlet Seal Gasket - Push Plug/Pin SLEEVE O.D. RANGE Other sleeve ranges and outlet sizes available upon request. U.S. Patent No CATALOG NUMBER X OUTLET X PLUG CODE OUTLET x 4 x 4 x x x x x x x x x x x THREADED PLUG TYPE CODE T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 T2 PUSH PLUG/PIN TYPE CODE T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T APPROX. WEIGHT (LBS.)

91 Line Stop Plug: Plug O-Ring: Blind Flange: Blind Flange Gasket: JCM 440 Type 3 - All Stainless Steel - Outlet Seal Gasket - Threaded Plug JCM 440 Type 13 - All Stainless Steel - Outlet Seal Gasket - Push Plug/Pin Ductile Iron per ASTM A53 Nitrile (NBR, Buna-N) Rubber - Gasket temperature range -40 o to 10 o F (-40 o C to 2 o C). 0#, ASTM A3 Carbon Steel, Epoxy Coated Styrene-Butadiene Rubber (SBR) - for use with water, salt solutions, mild acids and bases. Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). Per ASTM F9 Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydromechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temperature range -40 o to 10 o F (-40 o - 2 o C). Gasket suitable for water, salt solutions, mild acids, bases, and sewage. Body: Stainless Steel, 1- Type 304 per ASTM A240 Flange: ASME/ANSI 0 lb. Drilling, B1.1 Class 5 Compatible, Type 304 Stainless Steel, recess for tapping valve MSS-SP0 Bolts: Stainless Steel 1- Type 304 per applicable ASTM A193 B, A194. Push Plug/Pins: Outlet Gasket: NOMINAL JCM 440 Type 3 - All Stainless Steel - Outlet Seal Gasket - Threaded Plug JCM 440 Type 13 - All Stainless Steel - Outlet Seal Gasket - Push Plug/Pin SLEEVE O.D. RANGE Other sleeve ranges and outlet sizes available upon request. U.S. Patent No CATALOG NUMBER X OUTLET X PLUG CODE OUTLET x 4 x 4 x x x x x x x x x x x THREADED PLUG TYPE CODE T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 T3 PUSH PLUG/PIN TYPE CODE T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 T13 APPROX. WEIGHT (LBS.)

92 JCM 440 Type 5 - Stainless Body - Carbon Steel Outlet - Outlet Seal Gasket - Threaded Plug JCM 440 Type - Stainless Body - Carbon Steel Outlet - Outlet Seal Gasket - Push Plug/Pin Line Stop Plug: Plug O-Ring: Blind Flange: Blind Flange Gasket: Ductile Iron per ASTM A53 Nitrile (NBR, Buna-N) Rubber - Gasket temperature range -40 o to 10 o F (-40 o C to 2 o C). 0#, ASTM A3 Carbon Steel, Epoxy Coated Styrene-Butadiene Rubber (SBR) - for use with water, salt solutions, mild acids and bases. Standard temperature range from -40 o to 0 o F (-40 o to 5 o C) constant, maximum intermittent 10 o F (2 o C). Per ASTM A9 Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydromechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temperature range -40 o to 10 o F (-40 o - 2 o C). Gasket suitable for water, salt solutions, mild acids, bases, and sewage. Body: Stainless Steel, 1- Type 304 per ASTM A240 Flange: ASME/ANSI 0 lb. Drilling, B1.1 Class 5 Compatible, Carbon Steel, recess for tapping valve MSS-SP0, shop coat for corrosion resistance. Optional: Fusion applied epoxy coating. Bolts: Stainless Steel, 1- Type 304 Push Plug/Pins: Outlet Gasket: JCM 440 Type 5 - Stainless Body - Carbon Steel Outlet - Outlet Seal Gasket - Threaded Plug JCM 440 Type - Stainless Body - Carbon Steel Outlet - Outlet Seal Gasket - Push Plug/Pin NOMINAL SLEEVE O.D. RANGE Other sleeve ranges and outlet sizes available upon request. U.S. Patent No CATALOG NUMBER X OUTLET X PLUG CODE OUTLET x 4 x 4 x x x x x x x x x x x THREADED PLUG TYPE CODE T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 T5 PUSH PLUG/PIN TYPE CODE T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T APPROX. WEIGHT (LBS.)

93 JCM Fabricated Weld On Line Stop Outlets Carbon Steel and All Stainless Steel (304 & 31) Construction Available Outlets, partial sleeves and full sleeves readily available for steel pipe 4 and larger. Size on size and reducing outlets to accommodate folding head or bag stop machinery available. Outlets and partial sleeves available for tank and bulkhead use. JCM 440 Type - Full Body- Threaded Plug JCM 440 Type 1 - Full Body - Push Plug/Pin JCM 440 Type 7 - Outlet Only - Threaded Plug JCM 440 Type 17 - Outlet Only - Push Plug/Pin Nominal Pipe Size Catalog Number Outlet Sizes SLEEVE STYLE THREADED PLUG TYPE CODE SLEEVE STYLE PUSH PLUG/ PIN TYPE CODE SLEEVE STYLE THREADED PLUG TYPE CODE SLEEVE STYLE PUSH PLUG/ PIN TYPE CODE x 4 T T1 T7 T x 4 x T T T1 T1 T7 T7 T17 T x x T T T1 T1 T7 T7 T17 T x x T T T1 T1 T7 T7 T17 T x x T T T1 T1 T7 T7 T17 T x T T1 T7 T x T T1 T7 T x T T1 T7 T x T T1 T7 T17 How To Order: 1. Determine O.D. of pipe 2. Select proper catalog number 3. Select proper outlet size 4. Select proper sleeve style and outlet plug type code (threaded or push/pin) 5. Add Outlet Type Code (T or T1) Example: For Steel Pipe with.3 O.D., full sleeve style, with threaded plug, order: T Fittings are fabricated to exact O.D. of pipe. Larger sizes available. Other designs offered; contact JCM Industries. U.S. Patent No

94 JCM Engineered Fittings - Tapping Sleeve Guide JCM offers an extensive selection of Engineered Branching Fittings. Each of these items are unique application and are priced on request and custom made to order. Specific information is required to process a quotation for these items. To ensure all criteria is met during the quotation and ordering process, requests for pricing must include the following information: Type of Fitting Specified (i.e. mechanical joint, stainless steel, etc.) Type of Pipe Size of Pipe Type and Size of Outlet Working Pressure Test Pressure Line Content Type of Coating/Bolt Requirements Additional application/job site information concerning limited space, extraordinary environment conditions, concerns addressing pipe integrity or stability, etc. With this information, JCM Industries can accurately and promptly provide a price and delivery time for the fitting. Please call or for assistance from our technically trained insides sales team. Sample Tapping Sleeve Options 304 or 31 Stainless Steel Construction Threaded, Mechanical Joint, ANSI Flanges and other Specialty Outlets High Pressure Rating Capabilities Specialty Gaskets Offset or Deflected Outlets JCM Fabricated Tapping Sleeve with 45 o Outlet JCM Stainless Steel Weld On Outlet Beveled for Welding JCM Fabricated Mechanical Joint Tapping Cross 90

95 JCM 414 Fabricated Mechanical Joint Tapping Sleeve The JCM 414 Fabricated Mechanical Joint Tapping Sleeve is recommended for taps on pipe that will not accommodate a direct top seal tapping sleeve. The 414 utilizes a true mechanical joint sleeve design that completely encompasses the tap area, eliminating any potential leaks due to pipe cracks or breaks. Side gaskets are internally and externally trapped in a recessed groove machined into the bolting lug bars that completely compress the gaskets creating the watertight seal on the sides of the sleeve. The end gaskets are compressed into the sleeve housing with mechanical joint pusher glands, providing the water tight seal on the ends of the sleeve and completing the full encapsulation of the tap area. High Strength Steel eliminates stress cracked casting or flange possibility. Side And End Gaskets provide complete seal around the pipe. Fabricated Sleeves provide more strength with significantly reduced weight than a cast sleeve. The lighter sleeve reduces the load on the pipe and aids in installation and handling. For applications in corrosive environments, the JCM 414 is available fabricated in all stainless steel. Accommodates Non-Standard Pipe Characteristics - Oversize, undersize or irregularities in the pipe O.D. can be accommodated within the fitting increasing performance and safety factor. The JCM 414 is available in larger sizes, nonstandard sizes and with many special options (special flanges, special laying lengths, etc.) Improved Availability - Fabricated sleeves with nonstandard sizes have a delivery schedule of three to five weeks, significantly less than a cast sleeve s six to nine months. How To Order For pricing and engineering, the following information must be furnished: Type of pipe Outside diameter of pipe Irregular or non-standard pipe characteristics Line contents and pressure Outlet Size (14 and larger, furnish manufacturer of valve and cutter size) Coating and hardware Material requirements - options Special requirements JCM 114 Fabricated Mechanical Joint Tapping Sleeves meet or exceed ANSI/AWWA C111/A21.11 as applicable. JCM 414 Fabricated Mechanical Joint Tapping Sleeve - Material Specifications: Body: ASTM A25 Grade C or ASTM A3 Steel. Optional Stainless Steel 304 or 31. Flange: AWWA C207 Class D, ANSI 0 lb. Drilling, recessed for tapping valve MSS-SP0. Other flanges available. Pusher Gland: ASTM A3 or Ductile Iron. Optional Stainless Steel 304 or 31. Bolts: Corrosion resistant, high strength low alloy (ANSI/AWWA C111/A21.11). Optional Stainless Steel available. Gasket: Compounded for use with water, salt solutions, mild acids and bases. Coating: Heavy coat of corrosion resistant shop coat primer which is an excellent base for bitumastic coal tar or similar field coatings. Optional Fusion Epoxy Coating per ANSI/AWWA C213 available. JCM 414 Mechanical Joint Tapping Sleeves are Priced on Application. For quotation, contact the JCM Inside Sales Team at or

96 JCM 4 Tapping Sleeve for Concrete Steel Cylinder Pipe The JCM 4 Tapping Sleeve for Concrete Steel Cylinder Pipe is the standard in the industry for fast safe taps on Concrete Pressure Pipe. Designed to meet the AWWA M-9 Manual, the JCM 4 is the leading sleeve preferred by PCCP tapping contractors. These fabricated tapping sleeves are designed to reinforce the pipe and provide for easy installation with maximum safety factor. There are many unique features as well as options available on these sleeves. Unique to these sleeves are the following Separate Body and Tapping Gland (outlet) - By separating the outlet gland from the sleeve body the sleeve reinforces the pipe prior to removal of the critical prestress wire from the outlet area. Broad Cross Section Gasket - The 7/ wide gasket with a hydromechanical lip provides a broad sealing surface which produces an initial seal that increases with increases in line pressure. The broad, flat gasket is very advantageous for sealing on beveled cylinder welds. Gusseted Pressure Plate - The gusseted pressure plate eliminates problems caused by flexing of the cylinder or tapping sleeve pressure plate. This grooved plate is contoured to fit the cylinder and retains the broad profile gasket to provide an extra margin of safety at this critical point. Combination Gland/Draw Flange - The combination gland/draw flange on 4 - outlet sizes facilitates tapping with a 25 travel tapping machine. Larger outlets utilize separate flanges for each function to make bolt take-up on large flanges more accessible. Load Bearing Set Screws - The JCM 4 Tapping Sleeve is furnished with load bearing set screws on the gland flange that are tightened after the gland is installed. These set screws tighten against the sleeve draw flange, transferring any load on the outlet away from the steel cylinder and onto the sleeve. Grout Seal Assembly - Type I 4 Tapping Sleeve, the standard sleeve, is furnished with straps and a grout seal assembly under the sleeve. These two design features facilitate fitting oversize, undersize and out-of-round pipe by providing the means to pour cement grout into a cavity to make a perfect sleeve fit. This feature is in accordance with AWWA M-9 Manual as recommended by the manufacturers of concrete pressure pipe. Epoxy coated sleeves and sleeves with a solid back sit directly on the pipe, precluding the use of the grout seal assembly. Epoxy Coated Waterway - The tapping sleeve s waterway is fusion applied epoxy coated to provide a quality connection protected against corrosion in the critical waterway How To Order For pricing and engineering, the following information must be furnished: Type of pipe (also manufacturer and class if known) Type of sleeve Outside diameter of pipe and cylinder O.D. Line content and pressure Outlet size (on outlets 14 and larger furnish manufacturer of valve and cutter size) Material requirements or options Any special requirements or options. FOR SLEEVES FOR REINFORCED CONCRETE ASK FOR JCM 4 TAPPING SLEEVES FOR REINFORCED CONCRETE. 92

97 JCM 4 Tapping Sleeve for Concrete Steel Cylinder Pipe Many agencies have special requirements which are modifications of our standard design. JCM s manufacturing flexibility makes it possible for us to offer a great many modifications without delay in product availability. Some of the more popular options on these sleeves are: A solid back half in lieu of straps (Type II) for Pretension Concrete Cylinder Pipe. Entire sleeve and outlet epoxy coated with stainless steel straps. Different locations of the grouting holes. Material Specifications for JCM 4 Tapping Sleeve for Concrete Steel Cylinder Pipe: Body: ASTM A25 Grade C or ASTM A3 Steel. Optional Stainless Steel 304 or 31. Flange: Combination flange with ANSI 0 lb. Drilling, recessed for tapping valve MSS-SP0. Other flanges available Gasket: Nitrile Butadiene Rubber (NBR, Buna-N) per ASTM D2000. Molded virgin rubber with a pressure activated hydro mechanical design. Gasket is bonded into a cavity for internal and external retention. Gasket temperature range -40 o F to 10 o F (-40 o C - 2 o C) Gasket suitable for water, salt solutions, mild acids, bases, and sewage. Bolts: Corrosion resistant, high strength low alloy per A242 (ANSI/AWWA C111/A21.11). Optional Stainless Steel 304 or 31. Finish: Heavy coat of corrosion resistant primer on sleeve, gland and straps. Waterway of gland is epoxy coated (fusion applied per ANSI/ AWWA C213). Optional Fusion Bonded Epoxy Coating on entire sleeve. Meets criteria set forth in the AWWA M9 Manual for Concrete Pressure Pipe JCM Industries recommends a template of the outside diameter of the pipe surface on all taps with an outlet of 24 or larger, on all taps where the outlet is more than 0% of the pipe size, on pipe which out-of-roundness is suspected and on high-pressure taps where the fit of the sleeve is critical to the high pressure performance. Instructions for this procedure are available from JCM upon request. JCM 4 Tapping Sleeves for Concrete Steel Cylinder Pipe are Priced on Application. For quotation, contact the JCM Inside Sales Team at or

98 JCM SUR-GRIP RESTRAINERS JCM Sur-Grip Restrainers - reliable method of anchoring IPS PVC, C-900 PVC and Ductile Iron pressure pipe, and C-905 PVC pipe, to mechanical joint and push-on fittings, as well as bell to spigot joints. Designed to provide maximum resistance to surge pressure within a system. Supportive, circumferential pipe contact and large serrated inside surface provides the gripping action to properly restrain the joint, preventing pipe separation. JCM Sur-Grip Fitting Restrainer Anchors IPS, C-900 PVC Pipe, HDPE & Ductile Iron Pipe to mechanical joint and Fittings provided with anchor lugs. SERRATED COMPRESSION CATALOG T-HEAD BOLTS RING BODY NUMBER NOM. O. D. WIDTH QTY LIST PRICE /2 3/4 X 9-1/2 2 $ /2 3/4 X 9-1/ /2 3/4 X 9-1/ /2 3/4 X 9-1/ /4 3/4 X 9-1/ /4 3/4 X 9-1/ /4 3/4 X 9-1/ /4 3/4 X 9-1/ APPR. WT.EA. (LBS.) JCM 20 Sur-Grip Bell Joint Restrainer Anchors IPS PVC, C-900 PVC Pipe and Ductile Iron Pipe over the bell, flexible couplings and other low profile joints SERRATED COMPRESSION RING BODY COMPRESSION FOLLOWER RING APPR. WT. EA. (LBS.) CATALOG NUMBER BOLTS LIST PRICE NOM. O. D. WIDTH WIDTH QTY. QTY /2 1-3/ 2 3/4 X 2 $ /2 1-3/ 2 3/4 X /2 1-1/2 2 3/4 X /2 1-1/2 2 3/4 X /4 1-3/4 2 3/4 X /4 1-3/4 2 3/4 X /4 1-3/4 2 3/4 X 1-1/ /4 1-3/4 2 3/4 X 1-1/ JCM, 20 Restrainers Serrated Restrainer and Followers: T-Head Bolts, Oval Neck Bolts and Nuts: Finish: Ductile Iron ASTM A53 Corrosion resistant high strength, alloy steel. Standard Shop Coat - Heavy coating of corrosion inhibiting metal primer JCM /20 Sur-Grip Restrainers - rated for 235 PSI on DR-1 PVC Pipe, and equal to the pipe rating on other classes. JCM and 20 Sur-Grip Restrainers are rated for 350 PSI on Ductile Iron Pipe with a 2:1 safety factor. 94 Price Book Effective Cancels all previous prices. Prices subject to change without notice.

99 JCM Sur-Grip Restrainer for use with C-905 PVC Pipe Anchors PVC Pipe to Mechanical Joint and other types of fittings provided with anchor lugs. RESTRAINING RODS BOLTS CATALOG BODY NOM. O. D. NUMBER WIDTH QTY. QTY. LIST PRICE APPR. WT. EA. (LBS.) /4 X 14 1 X 9 4 $ /4 X 14 1 X /4 X 14 1 X /4 X 1 1 X /4 X 1 1 X 9 1, X X 9 P. O. A. 330 JCM 11 Sur-Grip PVC Fitting Restrainer for use with C-905 PVC Fittings and Pipe Anchors Long Bell PVC Gasketed Fittings to C-905 PVC Pipe. JCM 11 PVC Fitting Restrainers For price and availability, provide the O.D., manufacturer and SDR of the PVC fitting BASE CATALOG NUMBER - PROVIDE O.D. OF PVC FITTING PRICE x x x x P. O. A x x x x P. O. A x x x x P. O. A x x x x P. O. A x x x x P. O. A x x x x P. O. A. JCM 21 Sur-Grip Bell Joint Restrainer 4 - for HDPE, IPS & DIPS for use with C-905 PVC Pipe, HDPE Anchors over the bell-spigot & fused joint connection, the JCM 21 prevents joint separation on pressure pipe. RESTRAINING RODS BOLTS. APPR. CATALOG BODY LIST PRICE WT. EA. NOM. O. D. NUMBER WIDTH QTY. QTY. (LBS.) /4 X 2 1 X 9 $ /4 X 2 1 X 9 1, /4 X 2 1 X 9 1, /4 2 1 X 9 1, /4 2 1 X 9 2, X 9 1 P. O. A. 0 JCM and 21 Restrainers for use with C-905 PVC Pipe and HDPE IPS & DIPS Pipe Diameters Serrated Restrainer Body: Pressure Vessel Quality Boiler Plate Steel ASTM A25 Grade C. Bolts and Nuts: Corrosion Resistant, high strength low alloy per AWWA C111, ANSI Optional Stainless Steel, 1- Type 304 Finish: Standard Shop Coat - Heavy coating of corrosion inhibiting metal primer. Optional Fusion applied epoxy coating ANSI/AWWA C213 JCM, 11 and 21 Sur-Grip Restrainers sizes are available for HDPE. For quotation, contact JCM Inside Sales Team. JCM, 11and 21 Sur-Grip Restrainers sizes are not for use on ductile iron, cast iron, asbestos cement, steel or any other rigid types of pipe. For application recommendations, contact JCM Inside Sales Team at or Price Book Effective Cancels all previous prices. Prices subject to change without notice. 95

100 JCM 30 Restrainer for Asbestos Cement Pipe JCM 30 Restrainers have been developed to fill the need to anchor 4-1 inch Asbestos Cement pipe. The wide supportive stance around the pipe combined with the split design make these restrainers ideal for retrofitting installations. Necessary excavation of Asbestos Cement Pipe will release the compacted backfill around joint areas exposing the joints to shifting or movement. This disturbance can lead to displaced and leaking gaskets. Hydrants, dead ends, ground subsidence and unstable soils often require restraint other than concrete thrust blocking. JCM 30 Fitting Restrainer for Asbestos Cement Pipe Restrainer for use with fittings, hydrants, flanged coupling adapters, meter and mechanical joints. All thread rods (1 long) nuts and washers are included. Nominal Pipe Size Pipe Range O.D. Fitting Width (IN) No. Tie Rods Size Tie Rod Order Number Shop Coat Alloy Bolts Optional Finishes Epoxy Coat Alloy Bolts (E) Epoxy Coat Stainless Steel Bolts (ESS) /4 x $ $ $ /4 x /4 x /4 x /4 x , /4 x ,1.00 1, /4 x , , ,54.40 JCM 31 Coupling Restrainer for Asbestos Cement Pipe Restrainer for use over A/C coupling, MJ couplings and mechanical couplings. Tie rods (3 long), nuts and washers are included with restrainer Nominal Pipe Size Pipe Range O.D. Fitting Width (IN) No. Tie Rods Size Tie Rod Order Number Shop Coat Alloy Bolts Optional Finishes Epoxy Coat Alloy Bolts (E) Epoxy Coat Stainless Steel Bolts (ESS) /4 x $.0 $ $ 1, /4 x ,1. 1, /4 x , , /4 x , , , /4 x ,27. 1, , /4 x ,73.0 2,4.00 2, /4 x ,7.70 2,2.00 3,02.20 For optional Epoxy Coating add (E) to end of Catalog Number. For optional Epoxy Coating and stainless steel bolts add (ESS) to end of Catalog Number. Material Specifications 9 Restrainer Body: Pressure Vessel Quality Steel ASTM A25 Grade C or equal. Bolts and Nuts: Corrosion resistant high strength, low alloy AWWA C111, ANSI Optional stainless steel, 1- Type 304. Finish: Standard Shop Coat - heavy coating of corrosion inhibiting metal primer. Optional Fusion applied Epoxy Coating ANSI/AWWA C213. Price Book Effective Cancels all previous prices. Prices subject to change without notice.

101 JCM Fabricated Spools and Bypass Tees 20 Fabricated Plain End Tee 22 Fabricated Flanged x Plain End Tee 23 Bypass Tee (Flg x Flg x Flg) Sizes 3 and Larger, Available size on size and reducing Custom fabricated tees for cutting in services, replacing existing piping and for installing bypasses. The ability to meet exact length requirements, epoxy coated for extra corrosion resistance and quick shipment make these tee s real problem solvers. How To Order 1. Determine Nominal Pipe and Flange Size 2. Determine Outlet Tee/ Flange Size 3. Determine Exact Laying Length Requirements Example: Flange x Flange Bypass Tee Nominal Run with 4 Flanged Outlet, in Length Part Number: 23- x x 4 x Flange x Flange Spool with Test Outlets 32 Flange x Flange Spool without Test Outlets Sizes 3 and Larger, Available size on size and reducing Ideal for installing new meters and equipment where the laying length of the new equipment is shorter than the equipment being replaced. These flanged spools can make up the difference and add test outlets if necessary. Custom fabrication allows exact length requirements to be met How To Order 1. Determine Nominal Pipe and Flange Size 2. Determine Size and Quantity of Test Outlets (for 31) 3. Determine Exact Laying Length Requirements - minimum length available: Size on Size: 3 nominal size - 5-3/4, 4 - nominal size - -3/4 Example: Nominal run with two (2) 1-3/4 Test Outlets, in Length 31 Part Number: 31- x x 1-3/4 x with two (2) Test Outlets 32 Part Number: 32- x x 33 Flange x Plain End Spool with Test Outlets 34 Flange x Plain End Spool without Test Outlets Sizes 3 and Larger, Available size on size and reducing Ideal for use on installations requiring field fit up. Plain end accommodates a flexible coupling for easy adjustment. How To Order 1. Determine Nominal Pipe and Flange Size 2. Determine Size and Quantity of Test Outlets (for 33) 3. Determine Exact Laying Length Requirements -minimum length available: Size on Size: 3 nominal size - -3/4, 4 - nominal size - 9-3/4 Example: Nominal run with two (2) 1-3/4 Test Outlets, in Length 33 Part Number: 33- x x 1-3/4 x with two (2) Test Outlets 34 Part Number: 34- x x Price Book Effective Cancels all previous prices. Prices subject to change without notice. 97

102 JCM Fabricated Expansion Joints JCM Expansion Joints permit up to of concentrated pipe movement that provides for normal expansion/ contraction of pipelines subject to variations of both environmental and line content temperatures. JCM Expansion Joints are manufactured using a te21lescoping design that consists of a fabricated steel body, or housing, that accommodates an inserted internal slip pipe that moves in and out of the body. This free movement absorbs the linear, or axial, movement of the section of pipe. The fabricated steel body houses a packing area of alternating rings of lubricated flax and rubber that provides the water tight seal during the cycling of the joint. JCM Expansion Joints offer several design options including end connections, coatings, limit rods, stainless steel fabrication and others. JCM Expansion Joints are manufactured for each specific application allowing for the incorporation of special options or engineered features required for the installation. Heavy Duty Construction - The heavy duty, durable exterior body provides the protective shell for the slip pipe and packing system. For corrosive or acidic environments, the expansion joint may be epoxy coated or fabricated of stainless steel. Externally Guided Slip Pipe - The machined slip pipe furnishes a hard, corrosion resistant surface that reduces friction between the slip pipe and packing material. For corrosive environments or line contents, slip pipe is fabricated of stainless steel. Adjustable Packing Gland - Alternating rings of lubricated flax and rubber are packed tightly into the packing area of the body by the adjustable packing gland. This packing gland maintains a consistent compression of the flax/rubber rings to ensure a tight, leak proof seal between the slip pipe and body. Lubricated Packing - The rings of lubricated flax provide the lubrication to the slip pipe ensuring a smooth expanding/contracting movement while the square rubber rings secure the water tight seal. This packing area is easily accessible, without disruption of service, should repacking be required. HOW TO ORDER For pricing and engineering, the following information must be furnished: Type of pipe Outside diameter of pipe Type of End Connections Line Contents Minimum and maximum temperatures Maximum working pressure Material and Coating specifications JCM 02 Double End Expansion Joints are designed for special applications such as middle of line use where expansion joint body can be anchored. This fitting permits up to total pipe movement, 5 on each end, with properly anchored body. 9 Price Book Effective Cancels all previous prices. Prices subject to change without notice.

103 JCM Fabricated Expansion Joints JCM Expansion Joints are available as Model 01 Single End design or Model 02 Double End Expansion Joint and are available with the following options: (1) Weld-On Ends without Limit Rods (2) Weld-On Ends with Limit Rods (3) Flanged Ends without Limit Rods (4) Flanged Ends with Limit Rods (5) Mechanical Joint Ends without Limit Rods () Mechanical Joint Ends with Limit Rods Other end connections available Increased or decreased amounts of pipe movement capability JCM 01 Single End Expansion Joint JCM 02 Double End Expansion Joint JCM Expansion Joint - Typical Specifications Expansion Joints shall be of the externally guided, slip joint type, permitting up to of concentrated pipe movement. The packing gland shall have alternate rings of lubricated flax and rubber specially compounded for use with water, salt solutions, mild acids, bases, natural gas and sewage. The body of the expansion joint shall have a shop coat primer. The slip pipe shall be stainless steel. Expansion Joints shall be JCM 01 or approved equal. JCM Expansion Joint - Material Specifications Body Material: Body Flange: Slip Pipe: Packing Gland: Gasket and Flax: Bolts: Limit Rods: Finish: ASTM A3, ASTM A25 Grade C Carbon Steel or equal ASTM A3 or equal 1- Type 304 Stainless Steel per ANSI/AWWA C220, as applicable. ASTM A3, ASTM A25 Grade C, ASTM A53B or equal. Square packing Buna-N rubber, per ASTM D2000, 55-0 durometer, compounded for use with water, salt solutions, mild acids, bases and sewage. Flax: Gurlock waxed, braided cord (hemp). ASTM A193 B7, ASTM A194/ASTM A53 or Stainless Steel ASTM A193 B/BM, 304SS/31SS ASTM A193 B/BM/B7 or equal. Heavy coat of corrosion resistant primer. Meets or exceeds ANSI/AWWA C221 Fabricated Steel Mechanical Slip-Type Expansion Joints 99 Price Book Effective Cancels all previous prices. Prices subject to change without notice.

104 Surge Suppressors JCM Surge Suppressor provide an simple and economical solution to reduce the number and costs of repairs, protect valuable system assets and eliminate loss of treated water due to damage from water hammer. Water Hammer is the pressure surge that results when fluid in motion is forced to stop or change direction suddenly. This is a common occurrence at the end of a pipeline when a valve closes suddenly and introduces a pressure wave within the pipe. Water Hammer is caused by: Pump Failure Unexpected Power Outages Fast Opening/closing of Valves and Hydrants Pump Start-Up & Shut-Down Pipeline Breaks or Damage Severe changes in elevation or grade Decades old infrastructure materials become fragile and subject to damage as they and their service demands increase. Intense changes of velocity are exceptionally hard on pipelines - most our nation s systems include these at-risk pipes. Eliminating and preventing these severe water hammer situations will reduce sudden impacts on systems and extend the uninterrupted service life of the pipeline. Patent No Preventing fatal pressure stresses on pipe and other system components not only reduces costs associated with repairing breaks, but also the ecological danger of exposing the potable systems to transients and erosion of the subsurface soil base (i.e. sinkholes). Other costly hidden factors include liability of interruption to fire protection, medical and other emergency services. The overall benefits of JCM Surge Suppressors far exceed their initial costs by: Reduction in main breaks Reduce and eliminate water quality/supply complaints Extend the life expectancy of streets, pavement and overlays Minimize system pump damage Prevent water treatment discharge line main breaks JCM Surge Suppressors Options Model Number Connection Type 41 Stainless Steel Flange 42 Carbon Steel Flange 43 Stainless Steel Mechanical Joint 44 Carbon Steel Mechanical Joint Body Material Stainless Steel Stainless Steel Stainless Steel Stainless Steel Connection Material Stainless Steel Carbon Steel Stainless Steel Carbon Steel Connection Types Flange Flange Mechanical Joint Mechanical Joint Connection Standard ANSI/AWWA C207 ANSI/AWWA C207 ANSI/AWWA C111 ANSI/AWWA C111 Fitting Height Overall 1 / mm 1 / mm 22 / 55. mm 22 / 55. mm Fitting Length Overall 24 /09. mm 24 / 09. mm 24 / 09. mm 24 / 09. mm Outside Diameter.75 / / / / Approximate Weight 5 lbs. / 3.55 kg 5 lbs. / 3.55 kg 5 lbs. / 3.55 kg 5 lbs. / 3.55 kg JCM 00 Series Surge Suppressors are Priced on Application. Contact the JCM Inside Sales Team at or JCM 00 Series Surge Suppressor body is constructed of certifiable 1- type 304 Stainless Steel and available with two types of connections - flange and mechanical joint. The connections are available in stainless steel or carbon steel. 0 Price Book Effective Cancels all previous prices. Prices subject to change without notice.

105 JCM Tools And Accessories JCM MASTER WRENCHES JCM Master Wrenches are designed for simple, quick use for installing all types of pipe fittings and fabrications. By incorporating specific design points, JCM Wrenches eliminate problems such as missing sockets, bottoming out on long bolts and not having the right size socket. All JCM Master Wrenches offer these important field advantages. Two common sizes on each wrench. Works on long bolts without bottoming out. Nuts can be spun tight with knurled socket. No complex reverse mechanism - just flip over. Easily cleaned without disassembly. No loose parts. CATALOG NUMBER SOCKET NOMINAL NUT LENGTH PRICE CARTON QTY. WT. PER CARTON (LBS.) /4 X 1-1/1 3/4 & 5/ HH 17 $ / /4 1/2 & 7/1 HH 9-1/ / /4 X 11/1 7/1 & 3/ HH 9-1/ / / X /1 3/4 & 5/ STD. HEX JCM 900 Master Wrench Set QUICK SELECTION GUIDE WRENCH NO. NOMINAL FITS PRODUCTS 901 3/4 X 5/ HH M.J. BOLTS, CLAMPS, TAPPING SLEEVES 902 1/2 X 7/1 HH SMALL BOLTED COUPLINGS, CLAMPS 903 7/1 / HH PATCH CLAMPS 904 3/4 X 5/ STD. HEX FLANGE BOLTS, EQUIPMENT The JCM 900 Master Wrench Set includes all four JCM wrenches 901, 902, 903, 904 packed in a fabric rolled case for easy storage. The 900 Master Wrench Set Lists % LESS than if all four wrenches were purchased separately. A real savings! CATALOG NUMBER INCLUDES WRENCH MODELS PRICE CARTON QTY. WT. PER CARTON (LBS.) , 902, 903, 904 $ JCM 920 O. D. TAPE This popular tape has a blade which has standard inches on the reverse from the diameter in 0ths. This reversed blade allows a quick and accurate measurement of the diameter or circumference of the pipe. CATALOG NUMBER DESCRIPTION PRICE 920 Pipe Diameter Tape $21.0 Price Book Effective Cancels all previous prices. Prices subject to change without notice. 1

106 JCM 905 Torque Wrench JCM 9 Extra Deep Socket Set Designed For Field Use Knurled Grip provides a rugged No-Slip Grip that allows continual pull on the wrench during tighten process. Manual wrench allows for more accurate levels or torque to be achieved. 1/2 Standard Drive* accepts any 1/2 standard square socket. Audible Torque Indicator provides click sound that provides immediate confirmation the proper toque level has been met. Audible click eliminates the necessity of watching or protecting fragile dials and pointers. Reverse Action Lever make use simple, the same motion both tightens and loosens with just a flip of the lever. No Handles to Align. One strong hand eases use, especially in harsh environments and inclement weather. The JCM 905 meets the Federal Specification GGG-W-00C and is delivered calibrated with an accuracy of +4%. JCM 9 Extra Deep Socket Set Available from JCM this four piece deep socket set includes the popular 1/2 drive sockets sizes /1, 1-1/1, 1-1/, 1-1/4 with a plastic storage case to protect and store sockets when not in use. JCM 90 Universal Hydrant Wrench The JCM 905 and 9 come with their own storage cases to protect them when not in use. Adjusts from - 0 Ft. Lbs. - accommodates most common pipe fitting installation torque level recommendations. CATALOG NO. PRICE 905 Torque Wrench $ Socket Set Individual Sockets available. Contact JCM for Price and Delivery. New from JCM the 90 Universal Hydrant Wrench. This adjustable hydrant wrench accommodates pentagon nuts up to 1-3/4 and square nuts through 1-1/4. Complete with 3/4 through hole and lug style spanners, the JCM 90 fits both pin and lug style couplings. The JCM 90 handle is 7/ in diameter and has a knurled grip making it easy to use when wearing gloves and resistant to slippage. The long steel handle provides for maximum leverage. Zinc chromate plated. CATALOG NO. PRICE 90 Universal Hydrant Wrench $ Price Book Effective Cancels all previous prices. Prices subject to change without notice.

107 JCM INDUSTRIES, INC. INDUSTRY PRODUCT COMPARISON CHART JCM Industries Product Description Smith-Blair Dresser REPAIR FITTINGS 1 UCC - Standard Range F1 CL CDR1 2 UCC - Extended Range 227, F2, F3 CL2, CL CDR2-3 3 Tapped UCC - Std. Range F1 CL Tapped UCC - Ext. Range F2, F3 CL2, CL , All Stainless Steel UCC - Std. Range 25 FLS1 *SS1 132 All Stainless Steel UCC - Ext. Range 257 FLS2 *SS2, *SS3 133 Tapped All Stainless UCC - Std. Rng. 24 *SS1 134 Tapped All Stainless UCC - Ext. Rng. 25 *SS2, *SS3 13 Heavy Duty Stainless Repair Clamp 2 32AS-HP 32AS 11 All SS Fabricated Clamp FS1 SS1 31AS 540 CR1 All SS Fabricated Clamp - Ext. Rng. 22 FS2 SS2 32AS CR All SS Fabricated Lightweight Clamp LSS1, LSS2 31ASLW CSS1, CSS UCC - Removeable Lug 5 PVC Collar Leak UCC 229 FCC CLC CCLC Bell Joint - IPS PVC FBC 517 UCC Sewer Pipe LSS Patch Clamp FSC, FLSC SC 31A Full-Repair Clamp 244 FSCR SCC , 231 CFC 1 Heavy Duty Patch Clamp 31HD Heavy Duty Patch Clamp Mechanical Joint Repair Sleeve 11 Repair Slv for CSCP 142 Bell Joint Clamp - DI, CI 274 0S FBC , Bell Joint Clamp - DI, CI, C-900 PVC , 3232 COUPLINGS - FLANGED ADAPTERS 201 Steel Coupling FC MAXI 202 Long Steel Coupling FLC Steel Transition Coupling 413 FC5 TC Steel Reducing Coupling 4 2 FC RC Ductile Iron Coupling , 3 FC1 501 CDC 211 Ductile Iron Cplg - Stl, IPS PVC FC1 501 CDC 2 Ductile Iron Transition Cplg 433 FC CDC 214 Pipe End Cap Coupling 41, FEC EC Ec CDCEC 2 Long Ductile Iron Couplings LB 219 Restrained Ductile Cplg 220 Compression Coupling Insulating Adapter Gasket HDPE Pipe Stiffener INSERT SCP 241 Standard - Optimum Coupling 41 FC2W XR Long - Optimum Coupling 42 FC2W XR Cast Flanged Coupling Adapter 9 7 FFCA FCA CFCA 303 Fabricated Flg Cplg Adapter 913 FCA FC Reducing Fabricated FCA 914 FCA FC Fabricated FCA Reducing Fabricated FCA r 309 Fabricated Dismantling Joint 971 FDJ DJ JCM Industries Product Description Smith-Blair Dresser Compiled from information available at time of printing. Product comparisons are provided for reference purposes. Design material criteria should be confirmed prior to specification or purchase. Ford Meter Box Ford Meter Box Romac Romac PowerSeal PowerSeal Mueller Mueller Cascade Cascade Price Book Effective Cancels all previous prices. Prices subject to change without notice. 3

108 JCM INDUSTRIES, INC. INDUSTRY PRODUCT COMPARISON CHART JCM Industries Product Description Smith-Blair Dresser SERVICE SADDLES - TAPPING SLEEVES 401 Single Strap Service Saddle F1 1 DR1A 402 Double Strap Service Saddle F DR2A 403 Wide Body Service Saddle - SS Strap S DR1S 404 Service Saddle - Double SS Straps 317 FS S DR2S 405 Ctd Wide Service Saddle - SS Strap 3 1N 34 CNS1 40 Ctd Service Saddle - Dbl SS Straps 317 FC N 3417DI CNS2 407 Ctd ServSdl - Electro Galv Strap 311 1NU 3411DI CDS1 40 Ctd Serv Sdl - Dbl Elctro Galv Straps NU 3413DI CDS2 502 Stainless Steel Service Saddle 372 FS AS 411 Fab Tapping Sleeve - Plain End Outlet 4 Fab Tapping Sleeve - Flanged Outlet 22 FTS FTS CFT 419 Fab Tap Slv - Mechanical Joint Outlet 22MJ 340MJCS 422 Fab Tapping Sleeve for PVC/Stl/HDPE FTS419 *H CFTLP 429 Fab Tap Slv - PVC/Stl/HDPE - MJ Outlet 414 Fab Mechanical Joint Tapping Sleeve *23 *FTS425 *H 4 Tap Slv for CSCP 25 FTS Fab Weld-On Tapping Outlet - Partial 2 FWS FTS CRTWO 417 Fab Weld-On Tapping Sleeve Fab Threaded Outlet Tap Slv 3 CFTTO 425 Service Saddle for CSCP CS 432 All Stainless Steel Tapping Sleeve 5 30 FTSS SSTIII 3490AS H304 CSTEX 432 T2 All SS Fab Lug Lightweight Tap Sleeve 43 All SS Threaded Outlet Tap Slv STS420T 439 All SS Tap Slv - MJ Outlet 5 SST-MJ 3490MJAS 440 Line Stop Fitting 0 40 *SST-X 452 All SS Tap Slv - Outlet Seal Gasket FTSAS STS AS *H300 CFTSS 42 All SS Tap Slv - Carbon Steel Flange 4 30 FTSS SSTIII 3490CS H T2 SS Fab Lug Lightweight Carbon Flg FAST SST 340CS 44 SS Tap Slv - Outlet Gskt - Carbon Flg FTSAS 45 SS Tap Slv - Outlet Seal Gskt - Carbon MJ 49 SS Tap Slv - Full Gskt- Carbon MJ FTSAS SST-III-MJ 3490MJCS 459 All SS Tapping Sleeve - MJ Outlet FTSAS 340ASMJ FABRICATIONS 01 Expansion Joint - Single End 11 3 FEJ EJ Expansion Joint - Double End 3 FEJ EJ JCM Industries Product Description *Items of similar materials, designs vary Smith-Blair Dresser Compiled from information available at time of printing. Product comparisons are provided for reference purposes. Design material criteria should be confirmed prior to specification or purchase. Ford Meter Box Ford Meter Box Romac Romac PowerSeal PowerSeal Mueller Mueller Cascade Cascade 4 Price Book Effective Cancels all previous prices. Prices subject to change without notice.

109 Pipe Outside Diameter Guide SMALL DIAMETER S NOMINAL (INCHES) 1/2 3/ /4 1-1/ /2 COPPER TUBING STEEL & PLASTIC IMPORTANT: This Pipe O.D. Guide is furnished for your convenience and is based on the latest pipe standards and information supplied by pipe manufacturers. Due to occasional changes and variances in outside diameters, the pipe O.D. should always be verified before ordering fittings. STANDARD PRESSURE S NOMINAL (INCHES) COPPER TUBING STEEL & PLASTIC (SDR 2,21 & SCHEDULE) PLASTIC IRRIGATION (PIP) PLASTIC SEWER (SDR 35) PLASTIC (PVC) AWWA C-900/C-905/C POLYETHYLENE (IPS ) POLYETHYLENE (DIP ) CAST IRON DUCTILE IRON CLASS AWWA CLASS A AWWA PIT CAST CLASS B AWWA PIT CAST CLASS C - D AWWA PIT CAST ABESTOS CEMENT Class 200 Class 0 Class 0 MACHINED END * 13.44* FLINTITE ROUGH BARREL FLUID-TITE ROUGH BARREL PERMAFLEX ROUGH BARREL RING-TITE ROUGH BARREL MIN. STD. ROUGH BARREL MAX. STD. ROUGH BARREL MACHINED END FLINTITE ROUGH BARREL FLUID-TITE ROUGH BARREL PERMAFLEX ROUGH BARREL RING-TITE ROUGH BARREL MIN. STD. ROUGH BARREL MAX. STD. ROUGH BARREL MACHINED END FLINTITE ROUGH BARREL FLUID-TITE ROUGH BARREL PERMAFLEX ROUGH BARREL RING-TITE ROUGH BARREL MIN. STD. ROUGH BARREL MAX. STD. ROUGH BARREL NOMINAL (INCHES) * Flintite ME is.9 for and.99 for sizes. JCM INDUSTRIES, INC. P.O. Box 20 Nash, Texas Call Toll Free , Fax Toll Free Outside U.S. Call , Outside U.S. Fax Price Book Effective Cancels all previous prices. Prices subject to change without notice.

Terms and Conditions of Sale

Terms and Conditions of Sale Terms and Conditions of Sale (1) GENERAL All orders and contracts are subject to acceptance by JCM Industries, Inc. at Nash, Texas. The terms as hereinafter written shall supersede the terms of the customer

More information

FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED HIGH DENSITY POLYETHYLENE PIPE

FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED HIGH DENSITY POLYETHYLENE PIPE Effective May 24, 2002 Cancels all previous publications U.S. Price $12.95 FITTINGS AND FABRICATIONS DESIGNED AND ENGINEERED FOR HIGH DENSITY POLYETHYLENE PIPE JCM Industries, Inc. P.O. Box 1220 Nash,

More information

The Number One Choice of Line Stopping Contractors

The Number One Choice of Line Stopping Contractors JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest

More information

TAPPING & SERVICE SADDLES

TAPPING & SERVICE SADDLES TAPPING & SERVICE SADDLES The Standard of Excellence in the Industry CS12 CSC1 CS22 CSC2 CNS1 CDS1 CNS2 CDS2 CFS CFT-TO 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630)

More information

HDPE HIGH DENSITY POLYETHYLENE PRODUCTS

HDPE HIGH DENSITY POLYETHYLENE PRODUCTS HDPE HIGH DENSITY POLYETHYLENE PRODUCTS The Standard of Excellence in the Industry CPS-IPS PECST-SL PECR1 PECR2 PECS- PECS-22 PECSC-1 PECSC-2 CERTIFIED TO NSF/ANSI 1 13 BADGER STREET YORKVILLE, ILLINOIS

More information

JCM 101 Universal Clamp Couplings

JCM 101 Universal Clamp Couplings JCM 1 Universal Clamp Couplings JCM 1 Universal Clamp Coupling - Single Band JCM Universal Clamp Couplings provide a full circumferential seal and wide range for the permanent repair or reconnection of

More information

NEW FROM JCM INDUSTRIES MODEL 161 FABRICATED LUG ALL STAINLESS STEEL CLAMP

NEW FROM JCM INDUSTRIES MODEL 161 FABRICATED LUG ALL STAINLESS STEEL CLAMP JCM 161 FABRICATED LUG ALL STAINLESS NEW FROM JCM INDUSTRIES MODEL 161 FABRICATED LUG ALL STAINLESS STEEL The new JCM 161 Fabricated Lug All Stainless Steel Clamp offers an economical solution to problems

More information

PVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY

PVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version

More information

DENSITY POLYETHYLENE PIPE

DENSITY POLYETHYLENE PIPE Effective September 2, 2010 Replaces 9/2/08 U.S. Price $14.00 JCM INDUSTRIES Fittings and Fabrications Designed and Engineered for HIGH DENSITY POLYETHYLENE PIPE HDPE JCM Industries, Inc. P. O. Box 1220

More information

PIPE REPAIR PRODUCTS REPAIR CLAMPS

PIPE REPAIR PRODUCTS REPAIR CLAMPS PIPE REPAIR PRODUCTS REPAIR CLAMPS The Standard of Excellence in the Industry 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630) 553-0181 www.cascademfg.com 2007-2015

More information

PRICE SHEET TABLE OF CONTENTS AWWA VALVES & HYDRANTS. (PL-0418-AWWA Replaces PL-1014-VLV)

PRICE SHEET TABLE OF CONTENTS AWWA VALVES & HYDRANTS. (PL-0418-AWWA Replaces PL-1014-VLV) Page(s) 1 2 3 3 4 4 5 5 6 PRICE SHEET TABLE OF CONTENTS VALVES & HYDRANTS ( Replaces PL-1014-VLV) Product Line C515 NRS Gate Valves Series 1010 UL/FM C515 NRS Gate Valves Series 2010 C508 Swing Check Valves

More information

INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS

INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027

More information

DENSITY POLYETHYLENE PIPE

DENSITY POLYETHYLENE PIPE Effective January 15, 2016 Replaces 9/2/10 U.S. Price $14.00 JCM INDUSTRIES Fittings and Fabrications Designed and Engineered for HIGH DENSITY POLYETHYLENE PIPE HDPE JCM Industries, Inc. P. O. Box 1220

More information

Steel Fabricated Coupling

Steel Fabricated Coupling Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast

More information

Ford Fabricated Steel Products

Ford Fabricated Steel Products Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas

More information

Pipe Hangers, Strut & Accessories

Pipe Hangers, Strut & Accessories I N D U S T R I E S I N C. Base Price List September 22, 2008 Pipe Hangers, Strut & Accessories Phone 800.243.4844 860.647.1431 Fax 860.647.1160 180 Olcott Street Manchester, CT 06040 w w w. e m p i r

More information

TERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR)

TERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR) TERMS OF USE 1. Watts pricing and product data is subject to change without notice and such changes supersede all previous versions. 2. Watts data is to be used as provided. Watts is not responsible for

More information

GWC Valve International

GWC Valve International GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE API 6D SWING CHECK VALVES Pressure Class: ASME 150-2500 Size Range: 2-36 CATALOG NUMBER SC-1001 G W C V A L V E I N T

More information

Ford Bolted Flex Couplings. Section M. 5/2008; Web Revision 10/2010

Ford Bolted Flex Couplings. Section M. 5/2008; Web Revision 10/2010 Section M 5/2008; Web Revision 10/2010 Ford Bolted Flex Couplings The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487

More information

Ford Brass Saddles Style 101B and 202B

Ford Brass Saddles Style 101B and 202B 101B Ford Brass Saddles 101B and 202B 101B, 3/4" and 1" Taps 202B, 3/4" through 2" Taps Specifications Body - 85-5-5-5 brass alloy as per ASTM B62, ASTM B584 and AW WA C800. Threads may be FIP, AW WA,

More information

Cast and fabricated waterworks fittings. Proven and time tested. Quality you can depend on.

Cast and fabricated waterworks fittings. Proven and time tested. Quality you can depend on. Cast and fabricated waterworks fittings. Proven and time tested. Quality you can depend on. TABLE OF CONTENTS TAB SECTION CONTENTS PAGE 0 Forward 0.1.1 1 Couplings, End Caps, Accessories and Fabricated

More information

ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED

ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED

More information

STEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018

STEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018 STEEL PIPE NIPPLES - WELDED Price Sheet PNW-7.18 Effective: July 16, 2018 Cancels Price Sheet PNW-3.18 of March 5, 2018 FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT

More information

Price List. Specialty Products / Strainers / Check Valves / Butterfly Valves. Effective July 2, MuellerSteam.com 2018 MUELLER PRICE LIST

Price List. Specialty Products / Strainers / Check Valves / Butterfly Valves. Effective July 2, MuellerSteam.com 2018 MUELLER PRICE LIST 2018 MUELLER PRICE LIST Price List Specialty Products / Strainers / Check Valves / Butterfly Valves Effective July 2, 2018 All prices supersede previous issues, are temporary and subject to change without

More information

Specialty Products. Strainers. Check Valves. Butterfly Valves

Specialty Products. Strainers. Check Valves. Butterfly Valves Specialty Products Strainers Check Valves Butterfly Valves Effective Date: April 1, 2013 Trademarks: Viton is a trademark of DuPont Performance Elastomers, L.L.C. Teflon is a trademark of E. I du Pont

More information

6A-1773 Q ISO-2944

6A-1773 Q ISO-2944 6A-1773 Q1-2801 ISO-2944 Lowery Well Heads, Inc. Quality is #1 We are happy to announce that as of 9-11-15 we are now API Q1 and ISO 9001 certified. Lowery Well Heads, Inc. is committed to its customer

More information

INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS

INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #100217 EFFECTIVE: FEBRUARY 6, 2017 REV. 1 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 (800) 248-1027 Sheet #100217,

More information

Proven technology for individual valve solutions worldwide. GWC Valve International

Proven technology for individual valve solutions worldwide. GWC Valve International Proven technology for individual valve solutions worldwide FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE: 1/4-3 API STANDARD: 602 ASME B16.34 Catal og Nu mb er f SV-

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171

More information

Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products

Section N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................

More information

Dual Phase Extraction Inlet. Patent No Installation Manual. P/N Rev

Dual Phase Extraction Inlet. Patent No Installation Manual. P/N Rev Patent No. 6520259 Installation Manual P/N 95232 Rev 6-16-11 Table of Contents ing Extraction Inlets track changing water levels to maintain optimum performance 1.Component Identification Page 1 2. How

More information

430B SERIES HORIZONTAL SPLIT CASE PUMP

430B SERIES HORIZONTAL SPLIT CASE PUMP 430B SERIES TWO Stage - DIAGONALLY HORIZONTAL SPLIT CASE PUMP REPAIR PARTS INDEX NOTE! Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump.

More information

Kennedy Valve. A Division of McWane, Inc. AWWA PRODUCTS

Kennedy Valve. A Division of McWane, Inc. AWWA PRODUCTS Kennedy Valve A Division of McWane, Inc. AWWA PRODUCTS 1021 East Water Street Elmira, NY 14902 Phone: (607)734-2211 Fax: (607)734-3288 Fax: (800)952-4771 E-Mail: sales@kennedyvalve.com www.kennedyvalve.com

More information

Smith-Blair OMNI Coupling System Advantages:

Smith-Blair OMNI Coupling System Advantages: OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI

More information

PIPE FITTING ACCESSORIES EFFECTIVE FEBRUARY 5, 2018

PIPE FITTING ACCESSORIES EFFECTIVE FEBRUARY 5, 2018 CANADIAN IMPORT PRICE LIST PIPE FITTING EFFECTIVE FEBRUARY 5, 2018 version: EFFECTIVE: FEBRUARY 5, 2018 (SUPERSEDES ALL PREVIOUS PRICING) CORONA CALL CENTER (U.S.) Toll Free: (877) 701-7827 Fax: (951)

More information

Price List. Catalog Eleven. Rigging. Effective February 16, Specialties Inc. manufacturer of stage equipment

Price List. Catalog Eleven. Rigging. Effective February 16, Specialties Inc. manufacturer of stage equipment Price List Catalog Eleven Rigging Effective February 16, 2015 & manufacturer of stage equipment (626) 575-0776 14850 Don Julian Road, Suite B (800) 221-9995 City of Industry CA 91746 www.hhspecialties.com

More information

IRRIGATION FITTINGS PRODUCTS PRICE LIST SWING JOINT & HEAVY TURF INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES PRICE GROUP DISCOUNT MULTIPLIER

IRRIGATION FITTINGS PRODUCTS PRICE LIST SWING JOINT & HEAVY TURF INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES PRICE GROUP DISCOUNT MULTIPLIER PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LASCO SWING JOINTS First

More information

VERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS

VERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS 480 MODELS VERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS REPAIR PARTS INDEX NOTE! Read and understand the pump and driver instructions before attempting to install, disassemble or repair the pump. Part

More information

Metallic Casing Spacers/Isolators Designed Especially for Water and Sewer Cased Pipelines.

Metallic Casing Spacers/Isolators Designed Especially for Water and Sewer Cased Pipelines. E X P E R I E N C E C O U N T S Metallic Casing Spacers/Isolators Designed Especially for Water and Sewer Cased Pipelines. PSI...the respected leader in piping system technology. Time tested and proven

More information

Manufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1

Manufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1 STEEL NIPPLES S40 & S80 Steel Nipple Product Specifications Manufacturing Facility is ISO9001:2000 Welded Steel Pipe Conform to ASTM A53 Threads Conform to ASME B1.20.1 800-678-2544 800-678-0857 www.msi-products.com

More information

TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP

TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended

More information

Carbon Steel Nipples

Carbon Steel Nipples CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications

More information

PIPE FITTING ACCESSORIES EFFECTIVE JANUARY 14, 2019

PIPE FITTING ACCESSORIES EFFECTIVE JANUARY 14, 2019 IMPORT PRICE LIST PIPE FITTING EFFECTIVE JANUARY 14, 2019 version: IMP-ACC-UPL.19.01 EFFECTIVE: JANUARY 14, 2019 (SUPERSEDES ALL PREVIOUS PRICING) CORONA CALL CENTER (U.S.) Toll Free: (877) 701-7827 Fax:

More information

ALPHA Wide Range Restrained Joint

ALPHA Wide Range Restrained Joint ROMAC INDUSTRIES, INC. 1-800-426-9341 www.romac.com MADE IN U.S.A. January 8, 2015 ALPHA Wide Range Restrained Joint WIDE RANGE RESTRAINED JOINT Wide covers DI through IPS PVC pipe diameters without having

More information

SHAW-BOX INSTRUCTIONS AND PARTS LIST SHAW-BOX RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS)

SHAW-BOX INSTRUCTIONS AND PARTS LIST SHAW-BOX RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS) SHAW-BOX INSTRUCTIONS AND PARTS LIST SHAW-BOX RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS) GENERAL SHAW-BOX Rigid Mount I-Beam Trolleys are designed

More information

Pipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING

Pipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING MULTIPLIER SERVICE SADDLES MODEL 3401 BRONZE SADDLE FOR IPS PVC BODY CASTINGS: Waterworks Bronze (85-5-5-5) per ASTM B584 and AWWA C800. FASTENERS: Silicon Bronze per ASTM B98. GASKET: Patented SBR TwinSeal

More information

PRICE EACH PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017

PRICE EACH PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017 LIST U19-0317-IP PVC DWV FITTINGS SMALL AND LARGE DIAMETER MOLDED FITTINGS MARCH 1, 2017 SUPERSEDES U19-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed

More information

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description Technical Services -00- +-0--0 www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Models B0 and BN0

More information

Section 8 AMERICAN. Flanged Pipe

Section 8 AMERICAN. Flanged Pipe Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either

More information

PowerMax Diesel Upgrade For Cummins Engines

PowerMax Diesel Upgrade For Cummins Engines PowerMax Diesel Upgrade For Cummins Engines 00.5-007.5 Dodge Ram With Cummins 5.9L Item 3 4 5 6 7 8 9 0 3 4 5 6 7 8 Parts List Description Turbocharger Ancillary kit 773069- (includes) Installation Instructions

More information

900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX

900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX 900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump. Part # AF-03-326 2015 Pentair Ltd. 01/30/15

More information

1800,1900 MODELS VERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS

1800,1900 MODELS VERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS 1800,1900 MODELS VERTICAL AND HORIZONTAL SPLIT CASE FIRE PUMPS REPAIR PARTS INDEX NOTE! Read and understand the pump and driver instructions before attempting to install, disassemble or repair the pump.

More information

CASING SPACERS DESIGNED FOR WATER, SEWER, OIL & GAS

CASING SPACERS DESIGNED FOR WATER, SEWER, OIL & GAS CASING SPACERS DESIGNED FOR WATER TER,, SEWER,, OIL & GAS The BWM Company P.O. Box 1 Forest City, North Carolina 2803 Phone: 828.27.030 Toll Free 8 5 SPACER Fax: 828.25.59 www.bwmcompany.com BWM will provide

More information

ASSEMBLY OF TROLLEY TO HOIST

ASSEMBLY OF TROLLEY TO HOIST INSTRUCTIONS AND PARTS LIST RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS) GENERAL Yale Rigid Mount I-Beam Trolleys are designed especially for use on

More information

Price List. Backfl ow Prevention Products, Repair Kits, and Parts. Effective July 2, AmesFireWater.com 2018 AMES FIRE & WATERWORKS PRICE LIST

Price List. Backfl ow Prevention Products, Repair Kits, and Parts. Effective July 2, AmesFireWater.com 2018 AMES FIRE & WATERWORKS PRICE LIST 2018 AMES FIRE & WATERWORKS PRICE LIST Price List Backfl ow Prevention Products, Repair Kits, and Parts Effective July 2, 2018 All prices supersede previous issues, are temporary and subject to change

More information

SWING JOINT & HEAVY TURF

SWING JOINT & HEAVY TURF PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LSJHT EFFECTIVE JULY

More information

Installation & Operating Instructions for Zone Valve Boxes & Ball Valves

Installation & Operating Instructions for Zone Valve Boxes & Ball Valves V Series Zone Valve Box EV Series Zone Valve Box Ball Valve Page 1 of 9 Introduction The Powerex ball valves and zone valve boxes are cleaned for use with oxygen. Each valve is tested for leakage in both

More information

ABS DWV FITTINGS MARCH 1, 2017

ABS DWV FITTINGS MARCH 1, 2017 LIST U10-0317-IP ABS DWV FITTINGS MARCH 1, 2017 SUPERSEDES U10-1116-IP (NOVEMBER 1, 2016) Our website pricing is the current list price and may vary from our printed price list. Please visit our website

More information

Brass, Bronze, Iron and Stainless Steel Valves

Brass, Bronze, Iron and Stainless Steel Valves Price Schedule January 1, 2018 Supersedes BIV-06-15 Brass, Bronze, Iron and Stainless Steel Valves 07 BRONZE GATE VALVES CLASS 125 ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC

More information

PIPELINE PRODUCTS CORPORATION

PIPELINE PRODUCTS CORPORATION Price List January 2015 PowerSeal Pipeline Products Corporation was formed in 1985 when assets of the Special Products Division of the Clow Corporation were purchased by Edward J. Powers, a vice president

More information

Brass, Bronze, Iron and Stainless Steel Valves

Brass, Bronze, Iron and Stainless Steel Valves Price Schedule June 1, 2015 Supersedes BIV-06-11 CLASS 125 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE

More information

Pipe Repair Products. A complete selection for all types of pipe

Pipe Repair Products. A complete selection for all types of pipe Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available

More information

DELETE first sentence of first paragraph that reads: REPLACE with the following:

DELETE first sentence of first paragraph that reads: REPLACE with the following: To Bidder of Record: SAN ANTONIO WATER SYSTEM Addendum 2 To Construction Documents For 2012 WATER & SEWER CONSTRUCTION CONTRACT, PACKAGE I SAWS WATER JOB NO. 12-5001 SAWS SEWER JOB NO. 12-5501 Solicitation

More information

StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines

StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect

More information

Super Flange series 7200 Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes

Super Flange series 7200 Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes Designed for use on Ductile Iron, Steel, PVC, PVCO and HDPE Pipes INFORMATION The Series 7200 Super Flange is a restrained flange adapter designed to connect plain end pipe to a flange end component. May

More information

DeZURIK KUL KNIFE GATE VALVES

DeZURIK KUL KNIFE GATE VALVES KUL KNIFE GATE VALVES Instruction D11025 September 2013 Instructions These instructions are intended for personnel who are responsible for the installation, operation and maintenance of your KUL knife

More information

Flexible Couplings & Saddles

Flexible Couplings & Saddles Revised 6/01 Flexible Sewer couplings are the result of many years of experience with sewer pipe connections. Today's couplings are made of specially formulated elastomeric PVC with high tear and shear

More information

MetroPrime 22MPC Self-Priming Centrifugal Pump

MetroPrime 22MPC Self-Priming Centrifugal Pump Page 1 of 6 prevent priming or reduce pump capacity. OPERATION The 22 MPC-Metropolitan Pump is a self-priming centrifugal pump and only requires priming prior to its initial start. The pump will retain

More information

THOMAS. Ultra Saddles & Tees. Tap In Products PIPE PRODUCTS. Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps

THOMAS. Ultra Saddles & Tees. Tap In Products PIPE PRODUCTS. Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps THOMAS PIPE PRODUCTS Tap In Products Ultra Saddles & Tees Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps E1 Ultra Saddles & Tees Overview For a Permanent and Simple Tap In Solution for

More information

Lead Free Copper Alloy Valves

Lead Free Copper Alloy Valves Price Schedule LFV-01-19 January 1, 2019 Supersedes LFV-01-18 Lead Free Copper Alloy Valves BALL VALVES 2-Pc Body FULL PORT PLATED BALL PTFE SEATS* 600 CWP/150 WSP 014 $ 9.75 0.25 20 120 038 10.95 0.25

More information

TBM Series 3-Way Ball Valve

TBM Series 3-Way Ball Valve www.simtechusa.com TBM Series 3-Way Ball Valve Operating, Installation, & Maintenance Manual Corrosion Resistant Fluid and Air Handling Systems. Dated 06-26-13 TBM Series Ball Valves SIMTECHRECOMMENDSREADINGTHEFOLLOWINGINFORMATIONPRIORTOINSTALLINGANDUSING

More information

mechanical coupling system

mechanical coupling system mechanical coupling system R Since 1981 Depend-O-Lok has offered engineers, contractors, OEM s and system owners an improved pipeline coupling system. Depend-O-Lok products offer strength, longterm reliability,

More information

Model QP-10. QP Series. Parts Manual. Record of Change 200. Manual No December 2011 Edition

Model QP-10. QP Series. Parts Manual. Record of Change 200. Manual No December 2011 Edition QP Series Model Parts Manual Record of Change 200 This manual contains important safety information and must be made available to all personnel who operate and/or maintain this product. Carefully read

More information

ABS DWV FITTINGS APRIL 1, 2013

ABS DWV FITTINGS APRIL 1, 2013 LIST C10-11-111 ABS DWV FITTINGS APRIL 1, 2013 SUPERSEDES C10-11-110 (JUNE 1, 2012) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for

More information

INDUSTRIAL HAUL AGREEMENT

INDUSTRIAL HAUL AGREEMENT INDUSTRIAL HAUL AGREEMENT PUBLIC WORKS MEMORANDUM OF AGREEMENT entered into this day of, A.D., 20(yr). BETWEEN: PARKLAND COUNTY a County incorporated under the laws of the Province of Alberta, (hereinafter

More information

PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe

PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe Joint Restraint Products PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is a unique product with

More information

Schedule 80 - CPVC Pressure Fittings

Schedule 80 - CPVC Pressure Fittings Discount Codes 03 Schedule 80 CPVC Schedule 80 - CPVC Pressure Fittings List Prices L15-80C Effective: March 26, 2015 Revised 9.22.2016 2 Schedule 80 - CPVC Products Catalog www.lascofittings.com Pricing

More information

PRICES EFFECTIVE JULY 1, 2017 (REPLACES CATALOG DATED, APRIL 30, 2012)

PRICES EFFECTIVE JULY 1, 2017 (REPLACES CATALOG DATED, APRIL 30, 2012) PRICES EFFECTIVE JULY 1, 2017 (REPLACES CATALOG DATED, APRIL 30, 2012) REPAIR CLAMPS COUPLINGS SERVICE SADDLES SEWER PRODUCTS TAPPING SLEEVES RESTRAINT SYSTEMS HDPE PIPE PRODUCTS DRILLING & TAPPING EQUIPMENT

More information

AMES 2016 Price List. Backflow Prevention Products and Repair Kits and Parts. Effective February 29, 2016

AMES 2016 Price List. Backflow Prevention Products and Repair Kits and Parts. Effective February 29, 2016 AMES 2016 Price List Backflow Prevention Products and Repair Kits and Parts Effective February 29, 2016 All prices supersede previous issues, are temporary and subject to change without notice. AmesFireWater.com

More information

SCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12

SCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12 PRICE GROUP DESCRIPTION 02 SCH 80 PVC through 8 92 SCH 80 PVC 10" AND LARGER VB GASKET for FLANGE DISCOUNT MULTIPLIER PRODUCTS SCHEDULE 80 PVC PRESSURE FITTINGS INCLUDES: SCHEDULE 80 PVC 1/4 TO 12 L80P

More information

DAP-625S and DAP-875S

DAP-625S and DAP-875S AIR CHAMP PRODUCTS DAP-625S and DAP-875S (i) FORM NO. L-20078-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject

More information

PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe

PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for Plastic Pressure Pipe INFORMATION The PVC Stargrip Mechanical Joint Restraint System is an exceptional restraint system for mechanical

More information

Dia Vac Pump Operating Instructions Heated Head E Series Pump with General Purpose Motor

Dia Vac Pump Operating Instructions Heated Head E Series Pump with General Purpose Motor Dia Vac Pump Operating Instructions Heated Head E Series Pump with General Purpose Motor Air Dimensions Incorporated 1371 West Newport Center Drive, Suite # 101 Deerfield Beach, FL, 33442 800.423.6464

More information

September 2012 / M&H C502 / Model 129

September 2012 / M&H C502 / Model 129 GENERAL FEATURES / GENERAL SPEC M&H AWWA C502 FIRE HYDRANTS Model 129 Traffic Model 250 PSI Working Pressure 500 PSI Hydrostatic Test AWWA UL / FM Approved Type: Compression type, opening against line

More information

STC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way

STC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way STC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way Ordering Part No. = (e.g., E 1/2-3-S) Indicator / Control E 1/2 - - - 3-S Model Name Electric Actuated Valves E Port Size

More information

Dealer Registration. Please provide the following:

Dealer Registration. Please provide the following: Dealer Registration Please provide the following: A copy of your Dealer s License A copy of your Sales Tax Certificate A copy of the Driver s License for all representatives A copy of your Master Tag Receipt

More information

HR-20P Pneumatically Controlled Pressure Regulator

HR-20P Pneumatically Controlled Pressure Regulator HR-20P Pneumatically Controlled Pressure Regulator Instruction and Service Manual Hydroplex Corporation 230 West Gloria Switch Rd. Lafayette, LA 70507 337-233-0626 www.hydroplexpumps.com I. General Instructions

More information

"Buyer" or "you" means the person, firm or corporation to whom the order is addressed.

Buyer or you means the person, firm or corporation to whom the order is addressed. 1. Definitions "Australian Consumer Law" means the Australian Consumer Law set out in Schedule 2 to the Competition and Consumer Act 2010 (Cth) as given effect under Part XI of the Competition and Consumer

More information

INSTALLATION AND MAINTENANCE MANUAL FORM #PM-122 REV A 12/09

INSTALLATION AND MAINTENANCE MANUAL FORM #PM-122 REV A 12/09 HAND CRANK WELDING CABLE REEL: SERIES 100WC COXREELS The technical data and images which appear in this manual are for informational purposes only. NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES

More information

Compression Fittings & Valves. Make the connection

Compression Fittings & Valves. Make the connection Compression Fittings & Valves Make the connection Make the Connection with Compression Fittings, Valves, and Municipal Stops Make the connection with Philmac fittings. The versatile Philmac fitting system

More information

Installation Instructions

Installation Instructions 85-3195 rev. 12 04-18 Installation Instructions Thank you for purchasing this antisway bar kit. Please read through these instructions before installation. Part #1139-117 Rear Anti-Sway Bar Kit 1½ diameter

More information

PHD Manufacturing, Inc.

PHD Manufacturing, Inc. 4408 Columbiana-Waterford Road Columbiana, Ohio 44408 Phone: (800) 2-276 (0) 482-9256 Fax: (0) 482-276 www.phd-mfg.com Effective April 99 2 Quick Reference This catalog updated on May, 205 For the most

More information

Water, Sewer & Drain Fittings

Water, Sewer & Drain Fittings Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to

More information

Saf-T-Bar Conductor Bar T Series

Saf-T-Bar Conductor Bar T Series Saf-T-Bar Conductor Bar T Series P/N 964001 2012.04.12 Rev. 6 SERIES T SAF-T-BAR CONDUCTOR BAR 1 Conductix Incorporated The technical data and images which appear in this manual are for informational purposes

More information

PCC O P E R A T I O N S. Pump Cycle Counter M A N U A L. Environmental Systems

PCC O P E R A T I O N S. Pump Cycle Counter M A N U A L. Environmental Systems O P E R A T I O N S Environmental Systems PCC Pump Cycle Counter M A N U A L PO Box 3726 Ann Arbor, Michigan 48106-3726 (800) 624-2026 North America Only (734) 995-2547 Tele. (734) 995-1170 Fax info@qedenv.com

More information

TABLE OF CONTENTS ABOUT APACHE PRESSURE PRODUCTS 03 BALL VALVES 04 CHECK, GATE, FORGED STEEL VALVES 05 NEEDLE VALVES, TUBE FITTING, Y-STRAINER 06

TABLE OF CONTENTS ABOUT APACHE PRESSURE PRODUCTS 03 BALL VALVES 04 CHECK, GATE, FORGED STEEL VALVES 05 NEEDLE VALVES, TUBE FITTING, Y-STRAINER 06 TABLE OF CONTENTS ABOUT APACHE PRESSURE PRODUCTS 03 BALL VALVES 04 CHECK, GATE, FORGED STEEL VALVES 05 NEEDLE VALVES, TUBE FITTING, Y-STRAINER 06 UNION, PLUG VALVES, FITTINGS 07 INSTRUMENTATION PRODUCTS

More information

Installation Instructions

Installation Instructions 1 Installation Instructions SharkBite Connection System The SharkBite System The SharkBite connection system uses an advanced push-fit design that works in two stages. When the tube is inserted into the

More information

DeZURIK 2-24 (50-600mm) KGN-RSB BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES

DeZURIK 2-24 (50-600mm) KGN-RSB BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES 2-24 (50-600mm) KGN-RSB BI-DIRECTIONAL CAST STAINLESS STEEL KNIFE GATE VALVES Instruction D11023 October 2016 Instructions These instructions provide information about KGN-RSB Knife Gate Valves. They are

More information

Prices Effective March 1st Product Catalogue

Prices Effective March 1st Product Catalogue Product Catalogue Tubshower Ensembles Product Catalogue Firenze Bathtub Wall Set Direct-to-stud installation 3-piece wall panel system 6 extra large shelves ensure maximum storage Soft curves and appealing

More information