FKL PUMP HEAD ASSEMBLY
|
|
|
- Patience King
- 5 years ago
- Views:
Transcription
1 FKL Series Pumps 14 FKL PUMP HEAD ASSEMBLY (FOR COP PUMP HEAD ASSEMBLY, SEE PAGE 21) b b /1/ b 36 FKL PUMP GEARBOX ASSEMBLY 39d 34 9a a 39a 39b b c a 11a 45a
2 PARTS LIST FKL Series Pumps 15 Item Description Qty Bearing cover bolt 8* (*10) (*10) (*12) (*12) 3 Shaft hole plug Rear oil seal Bearing lock nut Coupling key Bearing lock nut washer Gearbox hole plug (mild steel) (*6) (*6) a 5* Gearbox hole plug (stainless steel) (*6) (*6) b Cover hole plug 1 N/A N/A N/A N/A N/A N/A Vent plug Front gearbox (cast iron) a 1 Front gearbox (stainless steel) Rear gearbox (cast iron) b 1 Rear gearbox (stainless steel) Gearbox Eyebolt (mild steel) N/A N/A a 2 Gearbox Eyebolt (stainless steel) N/A N/A b Cover Eyebolt 1 N/A N/A N/A N/A N/A N/A Drive shaft Drive shaft (COP) N/A N/A N/A 15 Housing stud (long) 4* (*2) (*2) Gapping shim kit Front bearing assembly Front oil seal Front bearing cover Guard screw Gearbox guard Housing/Cover pin 4* (*6) (*6) Housing screw Pump housing Housing stud (short) 4* N/A N/A (*2) (*10) (*10) (*12) (*14) Rotor o-ring (viton) Rotor (standard) Rotor bolt washer o-ring (viton) Rotor bolt washer Cover gasket (buna - standard) Pump cover Forcing screw Gearbox gasket Rear bearing assembly Oil sight glass Oil drain plug a Gearbox stud 4* (*2) (*2) (*6) (*6) (*6) (*6) (*6) 39b Gearbox forcing stud c Gearbox nut 6* (*4) (*4) (*8) (*8) (*8) (*8) 39d Gearbox pin Gear spacer (rear) Gear Gear spacer (front) Front mounting strap (mild steel) a 1 Front mounting strap (stainless steel) Rear mounting strap (mild steel) b 1 Rear mounting strap (stainless steel) Mounting strap screw (mild steel) N/A N/A N/A N/A Mounting strap screw (stainless steel) Gear key Idle shaft Idle shaft (COP) N/A N/A N/A Rotor bolt o-ring (viton) Rotor bolt Rotor nut (COP only, replaces 51,, 29) 4 N/A N/A N/A 52 Cover nut washer 8* N/A N/A (*6) (*4) (*14) (*14) (*16) (*18) 53 Cover nut 8* (*4) (*4) (*6) (*4) (*14) (*14) (*16) (*18) 72 Rotor Key N/A N/A N/A N/A N/A N/A N/A N/A * Quantities may vary
3 FKL Series Pumps 16 SINGLE MECHANICAL SEAL ASSEMBLY FKL SINGLE MECHANICAL SEAL Item Description Qty 15/ Rotor o-ring (viton) Rotor bolt washer o-ring (viton) Rotor bolt o-ring (viton) 2* (4) 54 Rotating seal o-ring (viton) 2* Rotating seal (Chrome oxide/ss) Rotating seal (Silicon carbide) N/A 56 Seal retaining ring 2 N/A** Single seal insert 2 N/A** Outer seal spring 2 N/A** Stationary seal (carbon) TBD 59 Stationary seal (Silicon carbide) N/A N/A Stationary seal (Chrome oxide/ss) Seal housing screw 8 N/A** (12) (12) (12) (12) (16) (16) Outer seal o-ring (viton) 2 N/A** Seal housing 2 N/A** Plastic cover plug 2* N/A** (4) 64 Inner seal o-ring (viton) Inner seal spring Seal pin Cartridge seal o-ring (viton) 2 N/A** (models only) * Quantities may vary ** N/A - models cartridge) (no
4 DOUBLE MECHANICAL SEAL ASSEMBLY FKL Series Pumps /1/2011 FKL DOUBLE MECHANICAL SEAL Item Description Qty 15/ Rotor o-ring (viton) Rotor bolt washer o-ring (viton) Rotor bolt o-ring (viton) 2* (4) 54 Rotating seal o-ring (viton) Rotating seal (Chrome oxide/ss) Rotating seal (Silicon carbide) N/A 56 Seal retaining ring 2 N/A** Outer seal spring 2 N/A** Stationary seal (carbon) TBD 59 Stationary seal (Silicon carbide) N/A N/A Stationary seal (Chrome oxide/ss) Seal housing screw 8* N/A** (12) (12) (12) (12) (16) (16) Outer seal o-ring (viton) Seal housing 2 N/A** Inner seal o-ring (viton) Inner seal spring Seal pin Flush seal (carbon) Water pipe 2* (4) Flush seal housing o-ring (viton) 1 N/A** N/A (models only) 73 Cartridge seal o-ring (viton) 2 N/A** * Quantities may vary ** N/A - models cartridge) (no
5 FKL Series Pumps 18 SINGLE O-RING CARTRIDGE SEAL ASSEMBLY MODELS MODELS A-S Rev. SINGLE O-RING SEAL (Models 25 2) Item Description Qty Rotor o-ring (viton) Rotor bolt washer o-ring (viton) Rotor bolt o-ring (viton) Seal housing screw 8* (12) 62 Seal housing TBD Inner stationary seal o-ring (viton) Seal o-ring (viton) * Quantities may vary SINGLE O-RING SEAL (Models 15 20) Item Description Qty 15/20 Rotor o-ring (viton) Rotor bolt washer o-ring (viton) Rotor bolt o-ring (viton) Inner seal o-ring (viton) Outer seal o-ring (viton) O-ring seal: single Shaft o-ring (viton)
6 DOUBLE O-RING CARTRIDGE SEAL ASSEMBLY FKL Series Pumps MODELS MODELS A-D Rev. - Item Description Qty Rotor o-ring (viton) Rotor bolt washer o-ring (viton) Rotor bolt o-ring (viton) Seal housing screw 8* (12) (12) 62 Seal housing TBD Inner seal o-ring (viton) Water pipe Flush seal housing o-ring (viton) Seal o-ring (viton) * Quantities may vary DOUBLE O-RING SEAL (Models 15 20) Item Description Qty 15/20 Rotor o-ring (viton) Rotor bolt washer o-ring (viton) Rotor bolt o-ring (viton) Inner seal o-ring (viton) Outer seal o-ring (viton) O-ring seal: double Shaft o-ring (viton) Flush o-ring (viton) DOUBLE O-RING SEAL (Models 25 2)
7 FKL Series Pumps 20 FKL COP O-RING SEAL ASSEMBLY SINGLE FKL COP O-RING SEAL Item Description Qty Outer seal o-ring (viton) Shaft sleeve: 316L (standard) Shaft sleeve: 316L (hardened) Inner seal o-ring (viton)
8 FKL COP PUMP HEAD ASSEMBLY FKL Series Pumps
FKL (25, 75, 150, 205, 250 & 400) Exploded View
3 FKL (5, 75, 50, 05, 50 & 400) Exploded View 3 4 5 6 7 8 9a0 a 3 4 5 6 7 34 35 8 9 0 40 4 4 43 36 37 38 39 44 45 46 65000005 Rev A 4 5 6 Fristam FKL Series Pumps 33 3 7 8 48 47 3 49 9 30 3 b 3 49 33 50
Single Seal Driver O-Ring
Fristam Pumps 0 FM3 (HP3) Assembly Single Rotating Single Stationary Double Stationary Double Rotating Spring Set Screw Single Rotating 265000334 Rev A Driver Drive Ring Double Single Stationary Single
Figure 15: FPH & FPHP 3542 and FPH 3552 Assembly
18 Figure 15: FPH & FPHP 3542 and FPH 3552 Assembly 1. Impeller Nut 2. Cover Nut 3. Cover Gasket 4. Housing Stud 5. Pump Housing 6. Impeller 7. Impeller Key 8. Rotating Seal o-ring 9. Seal Driver 10. Rotating
INSTRUCTION AND MAINTENANCE MANUAL: FL2/FL3 Series Pumps (Models: 15, 58, 75, 100 & 130)
FL Series Pump INSTRUCTION AND MAINTENANCE MANUAL: FL/FL3 Series Pumps (Models: 5, 58, 75, 00 & 30) SANITARY POSITIVE DISPLACEMENT PUMPS Fristam Pumps Description This manual contains installation, operation,
Instruction and Maintenance Manual: FL II Series Pumps (Models: 15, 58, 75, 100 & 130)
FLII Series Pu m p 1 Instruction and Maintenance Manual: FL II Series Pumps (Models: 15, 58, 75, 100 & 130) Sanitary Positive Displacement Pumps Fristam Pumps Description This manual contains installation,
INSTRUCTION AND MAINTENANCE MANUAL: FKL-25, 50, 75, 150, 250 and 400 Style Pump
FKL Series Pump INSTRUCTION AND MAINTENANCE MANUAL: FKL-5, 50, 75, 150, 50 and 400 Style Pump SANITARY POSITIVE DISPLACEMENT PUMP Fristam Pumps Description This manual contains installation, operation
DI PUMP PARTS PRICE LIST
ITEM 1 2 2A PUMP 5040 Pump Body, 1-1/2" NPT Mech. Seal 1 40058 1 5040 Pump Body, 1-1/2" NPT, Packing 1 40057 1 5040 Pump Body, 1-1/2" 150# Flg., Mech. Seal 1 40787 1 5040 Pump Body, 1-1/2" 150# Flg., Packing
U1 PUMP PARTS PRICE LIST
006-014 - 015-018 - 024-U1 PUMP PARTS PRICE LIST ITEM 1 7 8 9 DESCRIPTION QTY. PER PART PUMP 006-U1 Pump Body 1 See Note 1 1 006-U1 Pump Body with Flush 1 See Note 1 1 015-U1 Pump Body 1 See Note 1 1 015-U1
DI DI PUMP PARTS PRICE LIST
ITEM 1 2 2A 5050 Pump Body, 2" NPT Mech. Seal 1 40091 1 5050 Pump Body, 2" 150# RF Flg. Mech. Seal 1 40791 1 5050 Pump Body, 2" NPT, Packing 1 40088 1 5050 Pump Body, 2" 150# RF Flg., Packing 1 40793 1
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 030-U1 Pump Body 1 See Note 1 1 030-U1 Pump Body with Flush 1 See Note 1 1 034-U1 Rectangular Flange Inlet Body 1 See Note 1 1 034-U1 Rect. Flange Inlet Body with Flush 1 See Note 1 1
INSTRUCTION AND MAINTENANCE MANUAL:
1 INSTRUCTION AND MAINTENANCE MANUAL: FKL Positive Displacement Pump Models (original design, pre-2011): 25, 50, 75, 150, 205, 250 Models (original design, pre-2015): 400 Models: 580, 600 SANITARY POSITIVE
220-UL PUMP PARTS PRICE LIST
ITEM 1 PUMP Pump Body 1 See Note 1 1 Pump Body with Flush 1 See Note 1 1 7 Drive Shaft (Replaces 103227) 1 108425 8 Short Shaft (Replaces 103228) 1 108426 9 10 220-UL PUMP PARTS PRICE LIST DESCRIPTION
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 060-064 - 130-134 - 133-U1 PUMP PARTS PRICE LIST DESCRIPTION QTY. PER PUMP 060-U1 Pump Body 1 See Note 1 1 060-U1 Pump Body with Flush 1 See Note 1 1 064-U1 Rectangular Flange Inlet Body 1
INSTRUCTION AND MAINTENANCE MANUAL:
1 INSTRUCTION AND MAINTENANCE MANUAL: FKL Positive Displacement Pu m p Mo d e l s 25, 50, 75, 150, 205, 250, 400, a n d 580 SANITARY POSITIVE DISPLACEMENT PUMP 2 Description This manual contains installation,
Models 9202C, 9203C, 9252C-C, and 9253C-C
Models 0C, 03C, C-C, and 3C-C 3 0 3 consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, decription, and complete model
U2 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 180-U2 Pump Body 1 See Note 1 1 180-U2 Pump Body with Flush 1 See Note 1 1 184-U2 Pump Body 1 See Note 1 1 184-U2 Pump Body with Flush 1 See Note 1 1 220-U2 Pump Body 1 See Note 1 1 220-U2
Parts Lists UII Pump Parts
Parts Lists Parts Lists Waukesha Cherry-Burrell 006-04-05-08-UII Pump Parts Page 48 95-0305 September 009 006-04-05-08-UII Pump Parts PART NOTES 006-U Pump Body See Note 006-U Pump Body with Flush See
UII Pump Parts
Parts Lists 030-034-040-UII Pump Parts Waukesha Cherry-Burrell. Page 54 95-03015 September 2009 030-034-040-UII Pump Parts 1 7 8 9 10 : 1. 2. 12. 12A. 13. PART 030-U2 Pump Body 1 See Note 1 1 030-U2 Pump
Page 1 - Gearbox & Bearing Housing. Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2)
Spare Parts List Hy~Line Contents Page 1 - Gearbox & Bearing Housing Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2) Page 4 - Ports Page 5 - Single Mechanical
EBARA Self Priming Trash Pump. Type EFQT-EFQU
Type EFQT-EFQU Contents Section Page Model Designation 2 Features 3 Selection Chart 7 Dimension Drawings 20 Technical Data 24 Sectional View 25 1 Model Designation EFQ T 2 A MODEL TYPE EFQ self priming
1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
High Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
PARTS CATALOG MODELS 310, 410, 610, 910 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG 290901 MODELS 310, 410, 610, 910 GRAIN CART REVISED 10-12-00 Unverferth
Stop Rebuilding & Replacing Your Pumps
Stop Rebuilding & Replacing Your Pumps Stop rebuilding, replacing, and spending your valuable time on other PD pumps. Fristam s FKL pump simply runs better and lasts longer. Engineered for lasting performance,
Parts List. and Kits PARTS LIST & KITS CONTENTS. Parts List. Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques
GRUNDFOS Pumps Corporation 3131 N. Business Park Avenue Fresno, CA 93727 Parts List and Kits CONTENTS Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques L-CR-SM-016 (6/99)
ITT SSV. Goulds Pumps. Engineered for life. Commercial Water. G&L Series Repair Parts
ITT Commercial Water Goulds Pumps SSV G&L Series epair Parts Goulds Pumps is a brand of ITT Water Technology, Inc. - a subsidiary of ITT Industries, Inc. www.goulds.com Engineered for life TABLE OF CONTENTS
S Series PACER Pumps. PACER Pumps 5/91 Page 1 of 5. Dultmeier Sales for Omaha, NE or for Davenport, IA
PACER Pumps 5/91 Page 1 of 5 Item# Part No. Description Qty. 4 58-0721 NUT, BODY, Plated steel, 1/4-20 Hex... 10 58-0721 10 NUT, BODY, Stainless steel, 1/4-20 Hex... 10 6 58-0703 30 Bracket, polyester...
CASING COVER PLATE LUBRICATION GASKETS PRESSURE RELIFE VALVE SEAL OPTIONAL EQUIPMENT
Series: PFSPT Self-Priming Centifugal Pumps Size: x, Solids -1/ DISCHARGE x, lbs. Flange LIQUID TEMPERATURE 1 F CASING IMPELLER SHAFT SHAFT SLEEVE WEAR RING COVER PLATE FLAP VALVE Gray Iron ASTM A- Class
Parts List. and Kits PARTS LIST & KITS CONTENTS. Parts List. Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques
GRUNDFOS Pumps Corporation 3131 N. Business Park Avenue Fresno, CA 93727 Parts List and Kits CONTENTS Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques L-CR-SM-012 NEW
REPAIR PARTS LIST 31
LIST 31 Part Number Size Description List Price 0109-09-1601 16" Cover - Mild Steel $85.92 0109-03-1601 16" Cover - Aluminum $136.26 0109-07-1601 16" Cover - Stainless Steel 304 $329.09 0109-09-2001 20"
1. Spare Parts List 1.1 Preface The spare parts list is only valid for the type and versions of transmission, as shown below. You will find the transm
S P A R E P A R T S L I S T A N D E X P L O S I O N V I E W P A S C A T A L O G U E R T R E A S P ZF 15 MIV (HBW 150 V) Cod. 310.01.0100 1. Spare Parts List 1.1 Preface The spare parts list is only valid
INDUSTRIAL PUMPS MODEL: D-35-SD PARTS MANUAL SLURRY DUTY PUMP WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODEL: D-35-SD SLURRY DUTY PUMP Serial No. Date of Purchase When ordering parts
High Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
Models: G-25, H-25 With Non-Metallic Pump Head
Parts Manual G25-991-2403B Models: G-25, H-25 With Non-Metallic Pump Head WANNER ENGINEERING, INC. W0193B 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (12) 332-581 FAX: (12) 332-937 TOLL-FREE FAX [US
PARTSBOOK. Hall Manufacturing, Inc E. Washington Ave., P.O. Box Drawer 5638 North Little Rock, AR (501)
540 RPM 2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
Engine Parts Rev G.1
664 Engine Parts Rev G. 48 664 Engine Parts Rev G. N/A Crankcase 2 Ball Bearing 2 3 Oil Seal 2 4 N/A Seal, Govern Arm Shaft 5 N/A Shaft, Govern Arm 6 N/A Washer, Govern Arm Shaft 7 N/A Pin, Lock 8 Bolt,
Machine Component Identification Items: , ,
Machine Component Identification Items:, 165603, 165604 Ref. Description Ref. Description 1 Recoil 9 Generator Head 2 Fuel Valve Lever 10 6.5 Gallon Gas Tank 3 Engine Key Switch (165604 only) 11 Muffler
Models: G-25, H-25 With Metallic Pump Head
Parts Manual G5-99-40C Models: G-5, H-5 With Metallic Pump Head W09B WANNER ENGINEERING, INC. 04 Chestnut Avenue, Minneapolis, MN 55403 TEL: () 33-58 FAX: () 33-937 TOLL-FREE FAX [US only]: (800) 33-8
EXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330
S MULTICUT 430. Edition 1.3 June 2016 Part No
S147565 MULTICUT 430 Edition 1.3 June 2016 Part No. 8999080 Contents Ordering your Parts...2 S180043.21 Centre Deck...3 S180043.22 LH Wing Deck.4 S180043.23 RH Wing Deck.5 S180043.11 Std Wheel Arm 6 S180043.25
- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 120 203 PERFORMANCE CHART 200 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL
CRN90. Parts List & Kits. CR Series. Parts List & Kits CRN90. GRUNDFOS Commercial Industrial Service Manual
Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence P & Kits CRN90 GRUNDFOS Commercial Industrial Service Manual CRN90 P & Kits Contents P Spare t Kits Accessories
Printed from MediaCat
Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1106 020 2506 1 Crankcase (2) 2-11 2 0000 988 5217 1 Connector (2) 3 0000 988 5200 2 Connector (2) 4 1106 641
- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
Machine Component Identification Items: , ,
Machine Component Identification Items:, 165603, 165604 Ref. Description Ref. Description 1 Recoil 9 Generator Head 2 Fuel Valve Lever 10 6.5 Gallon Gas Tank 3 Engine Key Switch (165604 only) 11 Muffler
Model 3196 STi Size 1x1.5-6 OUTLINE DRAWING. Weights and Measurements. Pump Specification. Notes and References. Motor Specification
OUTLINE DRAWING Pump Specification SUCT.FLANGE SIZE 1.5'' DRILLING ANSI 150# FACING FF FINISH SERRATED DISCH.FLANGE SIZE 1'' DRILLING ANSI 150# FACING FF FINISH SERRATED PUMP ROTATION ( LOOKING AT PUMP
CLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
D503K 5+3HO & D500K 5+3
P-378 P-378 PARTS LIST FOR D503K HO & D500K P-378-A.1 P-378-A.1 D503K & D500K For Code: 10748, 10569 & C1260710137 Do Not use this Parts List for a machine if its code number is not listed. Contact the
CLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
HEAVY DUTY CENTRIFUGAL PUMPS
HEAVY DUTY CENTRIFUGAL PUMPS Supplemental Assembly Manual DryLock 3 Static Seal Cartridge Foreword This manual contains instructions and guidelines for the assembly of the Wilfley DryLock 3 static seal
Meter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
MODEL: G-25 WITH METALLIC PUMP HEAD
PARTS MANUAL G25-991-2402B MODEL: G-25 WITH METALLIC PUMP HEAD IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts
Non-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h. depending of the pump size and material execution
Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: Medium temperature: max. 110 C Casing pressure: Shaft sealing: up to 3600 rpm depending of
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
4500C Series Vortex Pumps
Section 009 Page 003 4500C Series Vortex Pumps Table of Contents 4500C Performance 2" x 2" - 4523C, Multiple Speed... 004 3" x 3" - 4523C, Multiple Speed... 004 4" x 4" - 4522C, Multiple Speed... 005 4"
HEIDTS SUPERIDE IRS INSTALLATION INSTRUCTIONS INDEPENDENT REAR SUSPENSION
HEIDTS SUPERIDE IRS INDEPENDENT REAR SUSPENSION Please read these instructions completely before starting your installation. Remember the basic rule for a successful installation: Measure Twice, Weld Once.
MICRO RAIN 50,58,&63 SPARE PARTS MANUAL JANUARY 1, 2005
MICRO RAIN 50,58,&63 SPARE PARTS MANUAL JANUARY 1, 2005 Sheilding, Wheel Assys, Front Hitch Assy. Shielding,Wheel Assys, Front Hitch Assy. Ref. Part # Description Qty. 1 MR-88052112/8 Outer Chain Cover
UNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:
Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
DPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
Ductile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
INSTRUCTION AND MAINTENANCE MANUAL: FZX 2000 SERIES PUMP
FZX Series Pump 1 INSTRUCTION AND MAINTENANCE MANUAL: FZX 2000 SERIES PUMP SANITARY LIQUID RING CENTRIFUGAL PUMPS Fristam Pumps 2 DESCRIPTION This manual contains disassembly and assembly instructions,
BSM ROTARY GEAR PUMPS
FT. MTD. PUMP The Heavy Duty S-Series pumps are designed to handle a wide variety of liquids and are particularly suitable for bulk transfer applications where long life and dependable service is required.
ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE
INSTALLATION INSTRUCTIONS CHEVROLET NOVA (NVR-301) INDEPENDENT REAR SUSPENSION
INSTALLATION INSTRUCTIONS 68-74 CHEVROLET NOVA (NVR-301) INDEPENDENT REAR SUSPENSION Please read these instructions completely before starting your installation. Assemble suspension on vehicle before powder-coating
ROTARY VANE VACUUM PUMPS Exploded View DuraVane Rotary Vane Pumps Oil-Lubricated RVL212HH
Exploded View Pumps 95 SOUTH WOODLAND AVENUE, MICHIGAN CITY, IN 660-567 Please visit our website at Page Number Reference www.dekkervacuum.com DWG //05 Exploded View 95 SOUTH WOODLAND AVENUE, MICHIGAN
Engineering Data Pack GlobalGear Series Pump US
Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral
Hydracel High Pressure Pump
Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1
PARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.
2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at
F1 CRANKCASE ASSY. NOTES: V5 Engine Model:172MM D# PART# DESCRIPTION Q'TY 1 172MM-A RIGHT CRANKCASE COMP. 1
NOTES: V5 Engine Model:172MM F1 CRANKCASE ASSY. 1 172MM-A-011200 RIGHT CRANKCASE COMP. 1 2 152MI-011010 OUTER BUSH, ENGINE SUSPENSION 2 3 152MI-011008 O-RING, 15.8 2.4 4 4 152MI-011009 INNER BUSH, ENGINE
INSTRUCTION MANUAL AND PARTS LIST FOR A3D SERIES PUMPS
TM INSTRUCTION MANUAL AND PARTS LIST FOR A3D SERIES PUMPS WARNING This Instruction Manual and General Instructions Manual SRM00046, should be read thoroughly prior to pump installation, operation or maintenance.
PARTS MANUAL FOR MVG 1200 SERIES
PARTS MANUAL FOR MVG 1200 SERIES MARMON-HERRINGTON ALL-WHEEL DRIVE E-mail: info@marmon-herrington.com TABLE OF CONTENTS REPLACEMENT PARTS & WARRANTY CLAIM PROCEDURE......... 3 HOUSING MVG 1200/R...................................
PH3100Ri Powerhouse Inverter Generator
PH3100Ri Powerhouse Inverter Generator Powerhouse Inverter Generator PH3100Ri 1. 7504 69449 Engine Assembly 1 2. 09080104 69500 Cable holder 1 3. 03050221 69350 M6 x 12 flange bolt 1 4. 03050241 69349
Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (incl 17.5% VAT)
Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (incl 17.5% VAT) Price (excl VAT) 000217 Nut for cylinder base stud, double hexagon 2.90 2.47 000300 Cylinder base stud 3.20 2.72 022516 Stud, cylinder,
Airflex Floating Housing Brake
Airflex Floating Housing Brake Airflex FHB Brake Elements Dimensional & Technical Data Overview Eaton Airflex has introduced a revolutionary new design in disc brake technology called the Floating Housing
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 THERMAL INSULATION 301 MECHANICAL SEAL 302 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY amd CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS
Non-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h
Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: up to 3600 rpm depending of the pump size and material execution Medium temperature: max. 110
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
INDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
PARTS VIEW. See page 5 for: Weweler-MBS Ø146mm beam s-cam details.
KF22 & KF29 DRUM BRAKE () See page 5 for: Weweler-MBS Ø146mm beam s-cam details. KF29 Long Pin P brake, Page 6, E For ConMet wheel end part numbers go to page 5 www.khitch.com.au Uncontrolled document
TB90BC 41ADT90C711 Page 1 of 6 Boom & Trimmer
TB90BC 41ADT90C711 Page 1 of 6 Boom & Trimmer TB90BC 41ADT90C711 Page 2 of 6 Boom & Trimmer 1 791-00040 1 Throttle Housing Assembly (includes 2-4) 2 791-00041 1 Throttle Trigger Lock-Out 3 791-00042 1
TOUGH SIMPLE GEAR PUMPS COST EFFECTIVE TOUGH SIMPLE COST EFFECTIVE. Tel: / Int'l: Fax: / Int'l:
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
mechanical seals for FRISTAM pumps
O.E.M. mechanical seals for FRISTAM pumps Fristam centrifugal and lobe-rotor pumps are widely utilised in the dairy, beverage and pharmaceutical industries. Stramek offer a wide range of components and
Appendix E Part Details for the PZ7 with Standard Bypass Valve
Appendix E Part Details for the PZ7 with Standard Bypass Valve No. Part No. Description Qty. 568 Pump case 66-X6R Rotor-shaft assembly 57 Vane 6 4 46-X Vane driver 5 9 Sideplate 44-XA Seal assbly. (Buna-N
Jensen. A Swagelok Company. JenFlo Positive Displacement Pumps
Jensen A Swagelok Company JenFlo Positive Displacement Pumps Jensen s new Jenflo Clean in Place Style (C.I.P.) Positive Displacement Pump (JFPD); has been designed for the food, dairy, beverage, pharmaceutical
UNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:
Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4
Telephone (925) Fax (925) Lawrence Drive, Livermore, CA 94551
Telephone (95) 454-9500 Fax (95) 454-950 5 Lawrence Drive, Livermore, CA 9455 PARTS MANUAL INDEX STEERABLE DRIVE AXLE ASSEMBLY STEERABLE DRIVE END ASSEMBLY BRAKE CALIPER ASSEMBLY TO USE THIS BOOK:. Refer
INSTRUCTION MANUAL AND PARTS LIST FOR PG/RG3D_-187, 218, 250 and 312 SERIES PUMPS
INSTRUCTION MANUAL AND PARTS LIST FOR PG/RG3D_-187, 218, 250 and 312 SERIES PUMPS WARNING This Instruction Manual and General Instructions Manual, CA-1, should be read thoroughly prior to pump installation,
Continental Progressive Cavity Pump CP Model CP56 Packed Seal Pump
Continental Progressive Cavity Pump CP Model CP56 Packed Seal Pump Continental Pump Company CP Model Number Nomenclature: Materials used in the pumps are based on the fluid to be handled and are indicated
UNIT CODE L177 EUROPE SECTION 13 OPTIONS
06/2005 EUROPE SECTION 13 OPTIONS DESCRIPTION PAGE ACCUMULATOR AND ATTACHING PARTS... 13-13 AUXILIARY TUBE EXTENSIONS TWO AND THREE STAGE FULL FREE-LIFT... 13-30 TWO STAGE LIMITED FREE-LIFT... 13-28 BACK-UP
Illustrated Parts List. Model Series 12D100. TYPE NUMBERS 0001 through TABLE OF CONTENTS
Illustrated Parts List Model Series 12D100 TYPE NUMBERS 0001 through 0940. TABLE OF CONTENTS FORM MS3399 REV P 08/06/2014 REPLACES FORM MS3399 REV N 10/03/2012 FILE IN SECT. 2 OF SERVICE MANUAL 12D100
CR10-08 A-A-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR10-08 A-A-A-E-HQQE 3x400D 50 HZ Grundfos pump 96501230 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/96501230/cr-10-8-a-a-a-e-hqqe.html