CLOSED COUPLED CENTRIFUGAL PUMPS
|
|
- Audra Welch
- 6 years ago
- Views:
Transcription
1 SECTION B PAGE 0 ISSUED /0 REPLACES /0 PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM - 60Hz. CAPACITIES TO 960GPM (60.6LPS) HEADS TO 0 FEET (6M) 900RPM - 0Hz. CAPACITIES TO 60GPM (9.7LPS) HEADS TO 6 FEET (0.M) Individual performance curves should be checked for final selection.
2 0 Third Street Piqua, Ohio SECTION B PAGE ISSUED /0 REPLACES /0 PRODUCT FEATURES. RADIAL SPLIT CASING DESIGN Casing is close grain iron of 0,000 p.s.i. minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line. Centerline discharge. Stud mounted casing assures positive alignment and allows rotation of discharge to eight different positions. Openings are provided for test gauges, for venting and for draining the pump.. ENCLOSED BRONZE IMPELLER Enclosed bronze impeller is of latest hydraulic design for maximum efficiency. It is balanced for vibration free operation. Precision fit to shaft and double-locked with key and cap screw.. REPLACEABLE CASING WEAR RING Prevents wear on casing and is easy to replace.. MECHANICAL SHAFT SEAL Mechanical Shaft Seal is self-adjusting for temperatures up to F (07 C) and pressures to 0 psi (0kpa). Has ceramic seat and carbon seal faces for long trouble-free service. Special seals are available for higher temperatures and fluids other than water. Tapped opening is provided in the seal chamber for flushing seal faces. MAXIMUM OPERATING CONDITIONS Maximum Pumping Temperature* F (07 C) Maximum Inlet Pressure 00 PSI (690kpa) Maximum Case Working Pressure 00 PSI (79kpa) * FOR STANDARD BUNA-N SEAL SUCTION & DISCHARGE SIZES * SERIES SUCTION DISCHARGE G6--/ " -/" G6- & F -/" " G6--/ & -/F " -/" G7- & F -/" " G7A- & F -/" " G7--/ & -/F " -/" G9--/ " -/" G9- & F -/" " G9--/ & -/F " -/" G9-F & G9A-F " " G9-F " " *F Suffix Denotes ANSI # Flat Face Flanges. BRONZE SHAFT SLEEVE Gasketed and keyed hook-type sleeve protects shaft wear and corrosion in seal area. 6. MOTORS The standard Type JM motors supplied with these pumps offer the advantages of quiet operation, controlled shaft deflection for longer mechanical seal life and bearings sized to provide good service life. All motors are supplied by manufacturers providing field service facilities. 7. INTERCHANGEABILITY The complete liquid end of any size pump is interchangeable between motors on close-coupled pumps and the BURKS power frames of comparable size providing inventory flexibility, plus an option for handling emergency service.. FACTORY TESTED After careful assembly and inspection, EVERY pump is factory tested and will meet Hydraulic Institute standards. FOR TEMPERATURES TO 00 F (60 C). All models, with the exception of the G7--/ and all G9 series pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffix "MJ" to pump catalog number for temperatures below 00 F (0 C) and add suffix "MJK" to pump catalog number for temperatures over 00 F (0 C). Example: G6--/MJ. See Section on High Temperature Pumps for more information. MATERIALS OF CONSTRUCTION Part Bronze Fitted All Bronze All Iron Adapter Cast Iron Bronze Cast Iron Casing Cast Iron Bronze Cast Iron Casing wear ring Bronze Bronze Steel Shaft Steel Steel Steel Shaft sleeve Bronze Bronze #6 S. Steel Impeller Bronze Bronze Cast Iron Shaft seal Carbon-Ceramic S. Steel-Buna-N Carbon-Ceramic S. Steel-Buna-N Carbon-Ceramic S. Steel-Buna-N
3 SECTION B PAGE ISSUED /0 REPLACES /0 DIMENSIONS 0 Third Street Piqua, Ohio SERIES G7-, G7A-, G7- /, G7-, G7A- & G7- / Catalog Number HP Motor Disc. Suct. DIMENSIONS IN INCHES Phase Phase Frame NPT NPT A AB B CP D DD E F G H L X Y Size 70 & 0 RPM 0G7-0G7- JM 7 / / / / / / 0 7 / 6 / / G7- G7- / JM 7 / / / / / / 0 7 / 6 / / / 0G JM / 9 7 / / /6 / / / / / /6 / / G7- JM 7 / / / / / / 0 7 /6 / / 0G7A- 0G7A- JM 7 / / / / / / 0 7 / 6 / / G7A- G7A- / JM 7 / / / / / / 0 7 /6 / / / 0G7A JM / 9 7 / / /6 / / / / / /6 / / G7A- JM 7 / / / / / / 0 7 / 6 / / G7- / G7- / / JM 7 / / / / / / / 0 7 /6 9 / / 0G7- / JM / 9 7 / / /6 / / / / / / /6 9 / / G7- / JM / 7 / / / / / / / 0 7 / 6 9 / / 0G7- / JM / 9 7 / 6 / 9 /6 / / / / / / /6 9 / / G7- / JM / 9 7 / / /6 / / / / / / /6 9 / / 00 & 900 RPM 0G JM / 9 7 / 6 / 9 /6 / / / / / /6 / / G7- JM / 9 7 / / /6 / / / / / /6 / / / G7-7 / JM / 9 7 / 6 / 9 / 6 / / / / / / 6 / / G7-0 JM 0 / / 6 7 / / / / / / / / 6 / / 0G7A JM / 9 7 / 6 / 9 /6 / / / / / /6 / / G7A- JM / 9 7 / / / 6 / / / / / / 6 / / G7A- 7 / JM / / 9 7 / 6 / 9 / 6 / / / / / / 6 / / G7A- 0 JM 0 / /6 7 / / / / / / / /6 / / G7A- JM 0 / / 6 / / / / 7 / / / 6 / / G7- / JM 0 / / 6 / / / / / 7 / / / 6 9 / / G7- / 0 JM 9 /6 0 / 6 /6 6 / / 7 7 / / / 7 / 9 / / / G7- / 6JM 9 /6 7 /6 6 / / / / 7 / 9 / / G7- / 0 JM / / 7 / 6 7 / / 9 / 7 / 7 / 7 / 9 / / DIMENSIONS SHOWN ABOVE ARE APPROXIMATE MAXIMUM DIMENSIONS FOR STANDARD PUMPS EQUIPPED WITH ODP MOTORS.
4 SECTION B PAGE ISSUED /0 REPLACES /0 60Hz PERFORMANCE CURVE END SUCTION CENTRIFUGAL PUMPS 0 Third Street Piqua, Ohio 6-060
5 0 Third Street Piqua, Ohio HZ PERFORMANCE CURVE END SUCTION CENTRIFUGAL PUMPS SECTION B PAGE 9 ISSUED /0 REPLACES /0
6 CCCP- RPM & PHASE - MOTORS OPEN DRIP PROOF HP FRAME SIZE 70 RPM Single Phase (ODP) / JM JM JM JM 70 RPM (ODP) 9 0 -/ JM JM JM JM 00 RPM Single Phase (ODP) / JM JM 00 RPM (ODP) / JM JM JM JM JM 6JM JM TOTALLY ENCLOSED 70 RPM Single Phase (TEFC) / JM JM JM JM JM 70 RPM (TEFC) / JM JM JM JM JM 00 RPM (TEFC) / JM JM JM JM 6JM JM 6JM EXPLOSION PROOF 70 RPM (XP) 6 7 -/ JM JM JM JM JM 00 RPM (XP) / JM JM JM JM 6JM JM 6JM SERIES: G7-, G7A- & G7--/ CENTRIFUGAL PUMPS File: G7-00.dwg
7 SYMBOL QUANTITY DESCRIPTION SYMBOL QUANTITY DESCRIPTION * Adapter - - JM Motors Adapter - - JM Motors Adapter Assy JM Motors Adapter Assy JM Motors 70 RPM Impeller - 0G7- & 0G7- Impeller - G7- & G7- Impeller - 0G7A- & 0G7A- Impeller - G7A- & G7A- Impeller - 0G7A- & 0G7A- Impeller - G7--/ & G7--/ Impeller - 0G7--/ & 0G7--/ Impeller - 0G7--/ & 0G7--/ 00 RPM Impeller - 0G7- & 0G7- Impeller - 7G7- Impeller - 00G7- Impeller - 0G7- Impeller - JM Motor Impeller - 0G7A- & 0G7A- Impeller - 7G7A- Impeller - 00G7A- Impeller - 0G7A- Impeller - 00G7A- Impeller - 00G7--/ Impeller - 0G7--/ Impeller - Casing Assy. - G7- & G7A- Casing Assy. - G7-F & G7A-F (Flanged) Casing Assy. - G7--/ Casing Assy. - G7--/F (Flanged) Wear Ring - G7- & G7A- Wear Ring - G7--/ Cap Screw - Use with 060 Adapter Cap Screw - Use with 09 & 06 Adapter Cap Screw - Use with 0 Adapter A A 0-C Stud Nut Washer Key - - JM Motors Key - -6 JM Motors Pipe Plug /", Bronze Pipe Plug /", Bronze Cap Screw, S.S. - - JM Motors Cap Screw, S.S JM Motors Washer - Bronze - - JM Motors Washer - Bronze - -6 JM Motors PUMPS With - JM Motors PUMPS With -6 JM Motors PUMPS With - JM Motors PUMPS With -6 JM Motors "CONTINUED ON NEXT PAGE" CCCP-9 SERIES: G7-, G7A- & G7--/ *Casing Assy. includes Symbols, 9 &. ** For hot water or caustic service + Series G7-, G7A- & G7--/ pumps have been manufactured with either flat or O ring type gaskets. Determine which type is required before ording. When in doubt, order flat gaskets. Adapter Assy. includes symbol.
8 CCCP-0 SYMBOL C 066 QUANTITY DESCRIPTION PUMPS With - JM Motors Mechanical Seal - Buna N (Std) Mechanical Seal - Viton Mechanical Seal - EPT ** PUMPS With -6 JM Motors Mechanical Seal - Buna N (Std) Mechanical Seal - Viton Mechanical Seal - EPT ** PUMPS With - JM Motors PUMPS With -6 JM Motors Shaft Sleeve, Bronze - - JM Motors Shaft Sleeve, Bronze - -6 JM Motors SYMBOL * 6 0 QUANTITY DESCRIPTION DIFFERING S FOR ALL IRON CONSTRUCTION 06-B 0-B 00-A 0-A 0-A 07-A Size Suffixes Same As Standard Bronze Impellers 0 06-B 060-A -B 7-B -B 7-B 099-A 060-A A 0-A 06-A 06-A 066-A 6 Adapter Assy JM Motors Adapter Assy JM Motors Impeller - Iron Impeller - Iron Impeller - Iron Impeller - Iron Cap Screw - for 060-A Adapter Cap Screw - for 09-B & 06-A Adapter Nut Casing Assy. - G7- & G7A- Casing Assy. - G7-F & G7A-F (Flanged) Casing Assy. - G7--/ Casing Assy. - G7--/F (Flanged) Wear Ring, Steel - G7- & G7A- Wear Ring, Steel - G7--/ Pipe Plug /", Steel Pipe Plug /", S.S. Washer - Steel - - JM Motors Washer - Steel - -6 JM Motors Shaft Sleeve, S.S. - - JM Motors Shaft Sleeve, S.S JM Motors Slinger Washer - - JM Motors Slinger Washer - -6 JM Motors DIFFERING S FOR ALL BRONZE CONSTRUCTION 060-A 09-B 06-A 0-A Adapter - - JM Motors Adapter - - JM Motors Adapter Assy JM Motors Adapter Assy JM Motors * -A 7-A -A 7-A Casing Assy. - G7- & G7A- Casing Assy. - G7-F & G7A-F (Flanged) Casing Assy. - G7--/ Casing Assy. - G7--/F (Flanged) B Cap Screw, Bronze - - JM Motors Cap Screw, Bronze - -6 JM Motors SERIES: G7-, G7A- & G7--/ *Casing Assy. includes Symbols, 9 &. ** For hot water or caustic service + Series G7-, G7A- & G7--/ pumps have been manufactured with either flat or O ring type gaskets. Determine which type is required before ording. When in doubt, order flat gaskets. Adapter Assy. includes symbol.
9 For technical advice or service please take your pump into your local pump service center. To order pump or parts or for pricing please go to the following links : Burks Pumps Home >> Burks Pumps stock list >>
CLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G5--/4 G6--/4 SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 500RPM
More informationSERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS
420 Third Street Piqua, Ohio 436-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WG6-2 SECTION 4A PAGE ISSUED 2/03 REPLACES 2/0 SELF-PRIMING CENTRIFUGAL PUMPS 300RPM -
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates
More informationSeries: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)
Series: G5-1¼, G6-1¼ 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3 LPS) HEADS TO 9 FEET (8 M) USA: (937) 778-8947 Canada: (905) 457-63
More informationSERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and
More informationSeries: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)
Series: G5-1¼, G6-1¼ C A L L 1-866 -670-0533 O R D E R O N L IN E www.burkspumpcatalog.com 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 2900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3
More informationSeries: GNA5-1-1/4, GNA6-1-1/4
1750 RPM - 60Hz. CAPACITIES TO 40 GPM (2.5 LPS) HEADS TO 0 FEET (9 m) USA: (97) 778-8947 Canada: (905) 457-622 International: (97) 615-598 1 500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 15 FEET
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.
More informationSeries: CT. 4CT RPM - 60Hz. CT RPM - 60Hz. (See Indivdual curves for symbol number)
4CT - 25-60Hz. CT - 450-60Hz. (See Indivdual curves for symbol number) Symbol 2 4 5 6 8 9 0 *MAXIMUM HEAD HP /2 /4 / /2 /4 / /2 /4 /4 /2 /4 Catalog - Phase - Phase 5CTM CTM CT6M 5CT6M CT6M CT5M 5CT5M 24CTM
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationSeries: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)
4ET - 725 RPM - 60Hz. ET - 450 RPM - 60Hz. (See Indivdual curves for symbol number) ET - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) 60 Hz Performance 60Hz - PERFORMANCE AND SELECTION CHART
More informationSeries: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)
4ET - 725 RPM - 60Hz. ET - 450 RPM - 60Hz. (See Indivdual curves for symbol number) ET - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) USA: (97) 77-947 Canada: (905) 457-622 International:
More informationProduct Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE
Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationTECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and
More informationTECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS
TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationSeries: EC & ED. EC & ED RPM - 60Hz. (See Indivdual curves for symbol number)
Series: EC & ED EC & ED - 1725 RPM - 60Hz. (See Indivdual curves for symbol number) EC & ED - 1450 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationRegenerative Turbine Pumps
Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine
More informationSeries: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number)
C A L L -866-670 -0533 O R D E R O N L INE www.burkspumpcatalog.com Series: ES 4ES - 725 RPM - 60Hz. ES - 3450 RPM - 60Hz. (See Indivdual curves for symbol number) ES - 2900 RPM - 50Hz. (See Indivdual
More informationSeries: EC & ED. EC & ED RPM - 60Hz. (See Indivdual curves for symbol number)
Series: EC & ED EC & ED - 1725 RPM - 60Hz. (See Indivdual curves for symbol number) EC & ED - 1450 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for
More informationHigh Capacity Centrifugal & Sprinkler Pumps
High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationSeries: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number)
4ES - 725 RPM - 60Hz. ES - 3450 RPM - 60Hz. (See Indivdual curves for symbol number) ES - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for fi
More information3340 Series Single Stage End Suction Pumps
3340 Series Single Stage End Suction Pumps Bulletin 3340/Rev. A Model 3344 Aurora 3340 Pump Setting New Standards of Efficiency Liquid handling requirements are much more involved than they were five years
More informationRegenerative Turbine Pumps
Bulletin E4 July E4/T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 6 Feet Temperatures to F MTH E4/T4 Series Close-coupled and pedestal mounted regenerative turbine pumps represent the
More informationITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.
ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials
More informationGH General Horizontal, Close Coupled and Frame Mounted Pumps
GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling
More informationBulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS
ulletin D1 September 006 D1 D61 D71 D91 Series Centrifugal Pumps Capacities to 0 GPM Heads to 60 eet MTH PUMPS Casing Standard casing construction of all units is ASTM A8 Class 0 cast iron. All bronze
More informationHIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS
HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationCE Close-Coupled End Suction Pumps. Leading The Flow. TACO.
CE Close-Coupled End Suction Pumps Leading The Flow. TACO. Quiet, dependable power and proven performance. CE Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics.
More informationGoulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps
High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet
More informationBulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
More information5GB, 7GB, 10GB, 18GB, 25GB, 33GB
B-33GB GB, 7GB, GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction: Standard
More informationITT. Goulds Pumps. 5GB, 7GB, 10GB, 18GB, 25GB, 33GB High Pressure Multi-Stage Booster Pump. Engineered for life. Residential Water Systems FEATURES
Goulds Pumps GB, 7GB, 1GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
More informationTaco CI Series End Suction, Base Mounted Pumps
Taco CI Series End Suction, Base Mounted Pumps Taco CI Series Pumps are similar to the Bell & Gossett 1531 series of base mounted pumps. Used in commercial, industrial and institutional applications where
More informationAURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS
AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM
More informationNC State University Design and Construction Guidelines Division 23 Hydronic Pumps
1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal
More informationModel 3550 ASME/ANSI B73.1M Industrial Process Pumps
3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp
More informationM50 L50 Series Multistage Regenerative Turbine Pumps
Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More informationModel 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS
Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationRepair Parts MODEL NPE/NPE-F
Repair Parts MODEL NPE/NPE-F 2002 G&L Effective January, 2002 RNPE TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System... NPE Seal Chart (Part of Numbering System)... Parts List...2 Optional
More informationFE Frame-Mounted End Suction Pumps. Leading The Flow. TACO.
FE Frame-Mounted End Suction Pumps Leading The Flow. TACO. Quiet, dependable power and proven performance. FE Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics.
More informationGoulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and
More informationHigh-Temperature and Pressure Paper Stock / Process Pump
3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads
More informationRegenerative Turbine Pumps
Bulletin T June 04 T E Series Regenerative Turbine Pumps Capacities to 40 GPM Heads to 700 Feet Temperatures to 00 F MTH PUMPS MTH T E Series Close-coupled and pedestal mounted regenerative turbine pumps
More informationCENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed
More informationAURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS
AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
More informationRegenerative Turbine Pumps
Bulletin M M Series Regenerative Turbine Pumps Capacities to 8 GPM Heads to Feet MTH M Series Vertical base mount and horizontal pedestal mounted multi-stage regenerative turbine pumps represent the most
More informationFire Protection. FP-XA End Suction
Fire Protection FP-XA End Suction PRODUCT BULLETIN MODEL FP-XA END SUCTION CPS Model FP-XA End Suction pumps are used in a variety of fire fighting applications. These rugged and efficient centrifugal
More informationRepair Parts MODEL G&L Series NPE/NPE-F
Repair Parts MODEL G&L Series NPE/NPE-F 2005 ITT Water Technology, Inc. Effective June, 2005 RNPE TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...1 NPE Seal Chart (Part of Numbering
More informationD Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006
D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation
More informationHORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST
Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)
More informationbarmesapumps.com WHAT IS AN ANSI PUMP
WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,
More informationGoulds Small Capacity Double Suction Pump
Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to
More informationTECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing
More informationClose-Coupled Centrifugal Pumps 316 Stainless Steel, Bronze and Cast Iron Models
316 Stainless Steel, Bronze Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain
More informationTrash Hog II Self Priming Solids Handling Centrifugal Pumps
Trash Hog II Self Priming Solids Handling Centrifugal Pumps Marlow Pumps ITT Industries Trash Hog II A Full Range of Product Features Industrial Duty Power End Provides rigid shaft support. Ample oil
More informationBulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter
Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationBulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs
Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................
More informationTrash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
More informationSeries Split Coupled Vertical In-Line Pumps. File no.: 43.10in Date: august 14, 2013 Supersedes: 43.10in Date:
Series 00 Split Coupled Vertical In-Line Pumps File no.:.0in Date: august, 0 Supersedes:.0in Date: february 0, 0 Series 00 Best commercial hvac pump design available since 99 Life cycle value at every
More informationVSC /VSCS Pumps Technical Brochure
VSC /VSCS Pumps Technical Brochure BX-4C VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION ASTM NO. Casing Cast iron A159 Class G0 Volute cover plate (Outboard)
More informationGENERAL OVERVIEW BRONZE PEDESTAL ROTARY GEAR N13HDM C992 BRONZE BRONZE HELICAL ROTOR 101BG RUBBER
GENERAL OVERVIEW BRONZE CLOSE COUPLED N970 BRONZE PEDESTAL N4000R BRONZE PEDESTAL ROTARY GEAR N13HDM PLASTIC CENTRIFUGAL 144 RUBBER ROLLER 310F BRONZE CENTRIFUGAL 50P DUCTILE IRON CLOSE COUPLED C992 BRONZE
More informationG&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS
TECHNICAL Brochure BAC8 Series A-C 8 SPLIT CASE PUMPS TABLE OF CONTENTS Useful Pump Formulas 2 Performance Curves 3-5 Materials of Construction (Standard) 6 Materials of Construction (Optional) 7 Pump
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationIndex - Section 14 End Suction Pump Semi-Open Impeller
Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump
More informationSHURflo Pedestal-Mount Centrifugal Pumps
316 Stainless Steel, Bronze and Cast Iron Models Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install,
More informationREPAIR SEALS AND OPTIONS
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationCRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38
CRANE-DEMING VERTICAL IN-LINE INDUSTRIAL BULLETIN 3180 SECTION 38 1 ease of installation & maintenance Install like a valve Mount in the pipeline Support on pipe or foundation... Save space - save time
More informationTECHNICAL BROCHURE B45-70HB R2 45HB, 70HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP
TECHNICAL BROCHURE B45-7HB R2 45HB, 7HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP FEATURES Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free
More informationSeries 1510 Centrifugal Pumps
Series 1 Centrifugal Pumps B-207H Table of Contents Useful Pump Formulas... 2 Standard Features... 3 Technical Data... Materials of Construction... Selection Charts... 6 Performance Curves... 7 Centrifugal
More informationITT. Goulds Pumps. Marlow Series Trash Hog II. Engineered for life. Wastewater. Self-Priming Solids Handling Centrifugal Pumps
Goulds Pumps Marlow Series Trash Hog II Self-Priming Solids Handling Centrifugal Pumps Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life TRASH HOG II A FULL RANGE OF PRODUCT
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationSeries HSC-S Pumps Technical Brochure
Series HSCS Pumps Technical Brochure BX512L Table of Contents Useful Pump Formulas 2 60 Cycle Performance Curves Series HSCS 3 50 Cycle Performance Curves Series HSCS 4 Series HSCS Materials of Construction
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationNPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R1
NPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R1 TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...1 NPE Seal Chart (Part of Numbering System)...1 Parts List...2 Optional Components...2
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader
More informationEZ SERIES BOOSTER PUMPS
EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a
More informationNPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R5
NPE/NPE-F REPAIR PARTS REPAIR PARTS RNPE R5 TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...3 NPE Seal Chart (Part of Numbering System)...3 Parts List...4 Optional Components...4
More informationSUBMITTAL DATA WATER PRESSURE BOOSTER SYSTEMS
WATER PRESSURE BOOSTER SYSTEMS Model WPB-100-40TT APPLICATION Applications include commercial, industrial and other installations requiring a boost in water pressure. The NECO Water Pressure Booster System
More informationV6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012
BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationRSV Series In-Line Vertical Multi-Stage, Ring Section Pump September 2013
1.0 Overview. The RSV series is Carver s multi-stage pump for water with maximum working pressures below 440 PSI. For other clean liquids please contact Carver Pump Company or your local distributor. The
More information