Appendix E Part Details for the PZ7 with Standard Bypass Valve
|
|
|
- Violet Freeman
- 5 years ago
- Views:
Transcription
1 Appendix E Part Details for the PZ7 with Standard Bypass Valve No. Part No. Description Qty. 568 Pump case 66-X6R Rotor-shaft assembly 57 Vane X Vane driver 5 9 Sideplate 44-XA Seal assbly. (Buna-N O-ring, stainless stl. seat) 44-XA Seal assembly (Buna-N O-rings, cast iron seat) 6 44-XA Seal assembly (Buna-N O-rings, Ni-Resist seat) 44-XD Seal assembly (Viton O-rings, S.S.seat) 44-XD Seal assembly (Viton O-rings, cast iron seat) 44-XD Seal assembly (Viton O-rings, Ni-Resist seat) Head Grease seal/oil seal X Roller bearing Retainer ring 445 Thrust bearing mounting ring 44 Thrust bearing assembly 449- Bearing cap shim (0.00") Bearing cap shim (0.00") Bearing cap shim (0.00") Bearing cap Grease seal 8 58 Grease zerk 9 4 Grease relief fitting Lubricap A Lock washer (/8") NC50A Hex head bolt 8-6_, O-ring 56- Flange (" NPT) Flange (-/" NPT) Flange (" BSPT) Flange (-/" BSPT) 56-S Flange (" Weld) 56-.5S Flange (-/" Weld) D Viton 5-4_ O-ring NC50A Hex head bolt Pipe plug (/4" NPT) NC5A Hex head bolt Name plate SF09E Pan head Phillip (6- x /6") 6 59 Lubrication plate * 4985 Shaft cover 70-00SF050E Pan head Phillip (0-4 x /") 4 70 Shaft key Bypass valve 5477 Bypass valve spring (50 75 psi) Bypass valve spring (75 00 psi) 5480 Bypass valve spring (00 5 psi) Bypass valve spring guide Bypass valve cap Adjustment set screw Gasket Adjustment set screw cap NC075A Hex head bolt 4 4-4_ O-ring Available with all 44-X seal assemblies or sold separately. _ denotes O-ring code listed above. 8
2 Appendix E Part Details for the PZ0 with Standard Bypass Valve No. Part No. Description Qty. 56 Pump case 98-X6R Rotor-shaft assembly 565 Vane X Vane driver Sideplate 44-XA Seal assbly. (Buna-N O-ring, stainless stl. seat) 44-XA Seal assembly (Buna-N O-rings, cast iron seat) 6 44-XA Seal assembly (Buna-N O-rings, Ni-Resist seat) 44-XD Seal assembly (Viton O-rings, S.S.seat) 44-XD Seal assembly (Viton O-rings, cast iron seat) 44-XD Seal assembly (Viton O-rings, Ni-Resist seat) Head Grease seal/oil seat X Roller bearing Retainer ring 445 Thrust bearing mounting ring 44 Thurst bearing assembly 449- Bearing cap shim (0.00") Bearing cap shim (0.00") Bearing cap shim (0.00") Bearing cap Grease seal 8 58 Grease zerk 9 4 Grease relief fitting Lubricap A Lock washer (/8") NC50A Hex head bolt 8-6_, O-ring 56- Flange (" NPT) Flange (-/" NPT) Flange (" BSPT) Flange (-/" BSPT) 56-S Flange (" Weld) 56-.5S Flange (-/" Weld) D Viton 5-4_ O-ring NC50A Hex head bolt Pipe plug (/4" NPT) NC5A Hex head bolt Name plate SF09E Pan head Phillip (6- x /6") 6 59 Lubrication plate 4985 Shaft cover 70-00SF050E Pan head Phillip (0-4 x /") 4 70 Shaft key 5 57 Bypass valve 548 Bypass valve spring (50 75 psi) Bypass valve spring (75 00 psi) 548 Bypass valve spring (00 5 psi) Bypass valve spring guide Bypass valve cap Adjustment set screw Gasket Adjustment set screw cap NC5A Hex head bolt 4 Available with all 44-X seal assemblies or sold separately. _ denotes O-ring code listed above. 9
3 Appendix E Part Details for the PZ7 Air Operated Valve (AOV) 5470-X Air Operated Valve (AOV) Assembly for a PZ NC5A Hex head bolt A Lock washer 0.75" AOV adjustment stem cap X AOV adjustment stem retainer ring X Hex nut X Air operated valve adjustment stem AOV low flow adjustment bushing X O-ring Air operated valve housing Threaded pipe plug 547-X Lock washer 0.5" 547-X Air operated valve disc 547-X Air operated valve diaphragm Air operated valve intermediate plate Air operated valve diaphragm cover X Diaphragm valve disc #0-4 x flat head cap screw Air operated valve gasket Not sold separately. Only available with the 547-X Air Operated Valve (AOV) diaphragm assembly. Available with the 547-X AOV diaphragm assembly or sold separately. 0
4 Appendix E Part Details for the PZ0 Air Operated Valve (AOV) 546-X Air Operated Valve (AOV) Assembly for a PZ NC75A Hex head bolt A Lock washer 0.75" AOV adjustment stem cap X AOV adjustment stem retainer ring X Hex nut X Air operated valve adjustment stem AOV low flow adjustment bushing X O-ring Air operated valve housing Threaded pipe plug 5466-X Lock washer 0.5" 5466-X Air operated valve disc 5466-X Air operated valve diaphragm Air operated valve intermediate plate Air operated valve diaphragm cover #0-4 x flat head cap screw X Diaphragm valve disc Air operated valve gasket Not sold separately. Only available with the 5466-X Air Operated Valve (AOV) diaphragm assembly. Available with the 5466-X AOV diaphragm assembly or sold separately.
5 Appendix E Part Details for Strainer 54-X_ Strainer Assembly for a PZ7 and PZ NC00A Hex head bolt 8 54 Strainer body cap -4_ O-ring 4 54 Strainer basket 5 54 Strainer body D Viton _ denotes O-ring code listed above. 54-XA for Buna-N or 54-XD for Viton. _ denotes O-ring code listed above. -4A for Buna-N or -4D for Viton.
Solutions beyond products...
ORIGINAL INSTRUCTIONS ID107E Installation, Operation & Maintenance Manual PZ-Series Sliding-Vane Truck Pumps for Refined Petroleum Products and Industrial Solvents PZ7 Model with Standard Bypass Valve
Installation, Operation & Maintenance Manual
ID08F Installation, Operation & Maintenance Manual PT-Series Petroleum Pumps For Refined Petroleum Products and Industrial Solvents Model PT0 Model PT5 with optional air operated valve (AOV) and strainer
EXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330
PV Series Vane Truck Pumps
PV Series Vane Truck Pumps ISO 900-008 PV Series Pumps General Introduction Versa vane truck pumps are specifically designed to comply with the pumping requirements demanded by the LPG industry. Bulk delivery
Industrial Pump Catalog
Industrial Pump Catalog Contents Why Corken?........................................................................ i-5 About This Catalog...................................................................
COMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit
09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279
Appendix D Outline Dimensions
Appendix D Outline Dimensions Models 91 691 and F91 F691 Bare with Flywheel L L1 M M1 M M1 L L1 Outline Dimensions Inches (Centimeters) Model A B C D E F G H J K 91, F91 1-13/16 2-3/8 3-11/16 13/32 5/8
LB361B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-031 2011/06 LB361B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 793099 Top End Repair Kit 793229 Includes Piston Rings & Expanders, Packing
Solutions beyond products...
ORIGINAL INSTRUCTIONS IH102C Installation, Operation & Maintenance Manual Model B177 External Automatic Bypass Valve Model B177 External Automatic Bypass Valve Warning: (1) Periodic inspection and maintenance
AWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
ROLLER PUMPS. Hypro Roller Pumps. Max RPM. Max PSI Series - 6 Roller Pump Series - 5 Roller Pump Series - 4 Roller Pump
ROLLER Hypro Roller Pumps GPM PSI RPM 1502C 62 150 1000 1502N 62 150 1000 1502XL 62 150 1000 1700C 45 200 1000 1700N 45 200 1000 1700XL 45 200 1000 4001C-A 9 150 1800 1500 Series - 6 Roller Pump Cast-iron
LB601B PARTS LIST COMPRESSORS CB-5E /06. Bulletins Needed For Complete Parts List. Gasket Set, Repair Kits and Special Tools
COMPRESSORS CB-5E-051 2011/06 LB601B PARTS LIST Serial # ID# Gasket Set, Repair Kits and Special Tools Gasket Set Buna-N & Aluminum 794099 Top End Repair Kit 794237 Includes Piston Rings & Expanders, Packing
REPAIR PARTS LIST 31
LIST 31 Part Number Size Description List Price 0109-09-1601 16" Cover - Mild Steel $85.92 0109-03-1601 16" Cover - Aluminum $136.26 0109-07-1601 16" Cover - Stainless Steel 304 $329.09 0109-09-2001 20"
MODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
87/88 Pneumatic Multi-Spring Diaphragm Actuators
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Valves 87/88 Pneumatic Multi-Spring Diaphragm Actuators Actuator air action can be changed in the field for increased flexibility and reduced
Spray System Workman. Parts Catalog. Form Number Model No and up.
Form Number 3351-161 Spray System Workman 200 Model No. 41229-240000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity, and the
Model-1 Natural Gas Valves
Flanged End 285 Screwed Weld End Locking Devices KEROTEST Model-1 s Short Weld End Long Weld End Weld x Flange 500 / 740 Flanged End 500 / 740 Weld x Flange 285 Model-1 Short Weld End Standard Welding
Installation, Operation & Maintenance Manual
IH106 Installation, Operation & Maintenance Manual ZV200 Bypass Valve Model ZV200 Bypass Valve Warning: (1) Periodic inspection and maintenance of Corken products is essential. (2) Inspection, maintenance
Appendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
Meter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
AWWA C515 REDUCED WALL DUCTILE IRON
30" - 54" R/W VALVES AWWA C515 Resilient Wedge Gate Valves Meet or Exceed the Requirements of AWWA Standard C515 Water Working Bubble Tight Hydrostatic Shell Size Range Pressure psi Test psi Test psi AWWA
P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas. Parts List for Petroleum and LPG Truck Meters
P-250 Rev. G P.D. Oscillating Piston Flowmeters: 2" Type 4-MT and MTSC Petroleum 2" Type 4D-MT LP Gas Parts List for Petroleum and LPG Truck Meters Type 4-MT Air Release 1 15 8 7 9 14 11 16 13 6 17 2 3
MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions
MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions DESCRIPTION: This valve is the basic component used for most
U2 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 180-U2 Pump Body 1 See Note 1 1 180-U2 Pump Body with Flush 1 See Note 1 1 184-U2 Pump Body 1 See Note 1 1 184-U2 Pump Body with Flush 1 See Note 1 1 220-U2 Pump Body 1 See Note 1 1 220-U2
Model Z4500 Stationary Pump
LPGCVP3C Sales Catalog for Stationary and Truck Pumps Model Z32 Truck Pump Model Z35 Stationary and Truck Pump Model Z45 Stationary Pump Model C51 Direct-Coupled Mounting Model 121 Stationary Coro-Vane
RP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
200 Spray System Vehicles
Form Number 3353-714 Rev B Workman Heavy-Duty Workman 200 Spray System Vehicles Model No. 41235-260000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the
MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
2016 Anhydrous Ammonia Storage Plant Catalog
206 Anhydrous Ammonia Storage Plant Catalog 0480 Shady Trail Suite #06 Dallas, Tx. 75220 www.squibbtaylor.com 800-345-805 Fax 24-357-5923 MANUFACTURED BY PARKER USER SAFETY RESPONSIBILITY STATEMENT For
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 228 Features Bolted bonnet allows easy inspection and servicing without removal from
Kunkle Models 91/218/228 liquid relief valves Safety and relief products
Cast iron liquid relief valves with bronze trim including models UL and FM approved for fire pump installations Model 8 Features Bolted bonnet allows easy inspection and servicing without removal from
87/88 Pneumatic Multi-Spring Diaphragm Actuators
GE Oil & Gas Technical Specifications 05/2013 Masoneilan * Valves 87/88 Pneumatic Multi-Spring Diaphragm Actuators Actuator air action can be changed in the field for increased flexibility and reduced
VALVES std $ fp $ fp $
std = standard port POLY BOLTED STAINLESS STEEL BOLTS, NUTS & WASHERS fp = full port Code No. Part No. Size Price 5143361 60540 1/2 fp $ 29.29 5143362 60541 3/4 fp $ 29.29 5143363 60542 1 std $ 29.29 5143364
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
FKL (25, 75, 150, 205, 250 & 400) Exploded View
3 FKL (5, 75, 50, 05, 50 & 400) Exploded View 3 4 5 6 7 8 9a0 a 3 4 5 6 7 34 35 8 9 0 40 4 4 43 36 37 38 39 44 45 46 65000005 Rev A 4 5 6 Fristam FKL Series Pumps 33 3 7 8 48 47 3 49 9 30 3 b 3 49 33 50
DI PUMP PARTS PRICE LIST
ITEM 1 2 2A PUMP 5040 Pump Body, 1-1/2" NPT Mech. Seal 1 40058 1 5040 Pump Body, 1-1/2" NPT, Packing 1 40057 1 5040 Pump Body, 1-1/2" 150# Flg., Mech. Seal 1 40787 1 5040 Pump Body, 1-1/2" 150# Flg., Packing
Cast Iron Liquid Relief Valves
Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze
Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
Masoneilan* 87/88 Series
Technical Specifications 11/2017 Masoneilan* 87/88 Series Pneumatic Multi-Spring Diaphragm Actuators Actuator air action can be changed in the field for increased flexibility and reduced inventory. BHGE
Models: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
FKL PUMP HEAD ASSEMBLY
FKL Series Pumps 14 FKL PUMP HEAD ASSEMBLY (FOR COP PUMP HEAD ASSEMBLY, SEE PAGE 21) 25 24 51 28 12b 31 23 53 52 15 30 29 9b 26 10 3 5 12600616 7/1/2011 33 32 11b 36 FKL PUMP GEARBOX ASSEMBLY 39d 34 9a
U1 PUMP PARTS PRICE LIST
006-014 - 015-018 - 024-U1 PUMP PARTS PRICE LIST ITEM 1 7 8 9 DESCRIPTION QTY. PER PART PUMP 006-U1 Pump Body 1 See Note 1 1 006-U1 Pump Body with Flush 1 See Note 1 1 015-U1 Pump Body 1 See Note 1 1 015-U1
AP50 MANUAL AND PARTS LIST VERSA-MATIC PUMP. Service / Maintenance Log SUBMERSIBLE CENTRIFUGAL PUMP. Contact Information. Date Details Completed
Service / Maintenance Log Date Details Completed MANUAL AND PARTS LIST AP50 SUBMERSIBLE CENTRIFUGAL PUMP Contact Contact Information Phone / Fax No. DISTRIBUTOR VERSA-MATIC PUMP A Unit of IDEX Corporation
Product Range IDEX CORPORATION
Product Range IDEX CORPORATION Viking Pump provides an unmatched combination of application expertise and positive displacement pumping products to meet your pumping needs. We specialize in the design,
Page 1 of 7 Section 05-03A: Axle, Front Drive, Dana Models 44 and 50 1996 Bronco/F-Series Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 06/19/2000 Hubs, Automatic Lock Refer to Section
Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
220-UL PUMP PARTS PRICE LIST
ITEM 1 PUMP Pump Body 1 See Note 1 1 Pump Body with Flush 1 See Note 1 1 7 Drive Shaft (Replaces 103227) 1 108425 8 Short Shaft (Replaces 103228) 1 108426 9 10 220-UL PUMP PARTS PRICE LIST DESCRIPTION
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 060-064 - 130-134 - 133-U1 PUMP PARTS PRICE LIST DESCRIPTION QTY. PER PUMP 060-U1 Pump Body 1 See Note 1 1 060-U1 Pump Body with Flush 1 See Note 1 1 064-U1 Rectangular Flange Inlet Body 1
F300 Pressure Regulator
F300 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P302 has Internal Relief Valve for Overpressure Protection Ideal for Fix Factor Billing The F300 series pilot operated
P773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 030-U1 Pump Body 1 See Note 1 1 030-U1 Pump Body with Flush 1 See Note 1 1 034-U1 Rectangular Flange Inlet Body 1 See Note 1 1 034-U1 Rect. Flange Inlet Body with Flush 1 See Note 1 1
POWERS Controls. Technical Instructions Document No P25 AP December 3, No. 6 Pneumatic Damper Actuator.
POWERS Controls No. 6 Pneumatic Damper Actuator Technical Instructions AP 331-3 331-2793 Actuator 331-2857 Actuator with Clevis and Pin 331-3012 Extended Shaft and Frame Mounting Description The POWERS
********************************* Action Not Allowed
Page 194 To Order Call: 1.877.DBL.TANK 1.877.325.8265 Pumps Jabsco 2 and 2-1/2 Pumps... 195 Viking/Viking, Waukesha 130, Flotech uni-bloc 551, Ranger 11, 17, 22 Series/Roper 3622... 196 Blackmer ATX Aluminum
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
D/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION
CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION TESTING AND DESIGN SPECIFICATIONS (PER AWWA C502 / NSF /ULC & FM) 1. Hydrant shall be manufactured in accordance with AWWA C502 latest revision
RL-F60 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to
RL-F60 PARTS LIST # 102692I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to For older hoists use the following: Parts List No. 102692H for Serial Number 2640 to 6744 IF YOUR HOIST DOES NOT FALL WITHIN
S Series PACER Pumps. PACER Pumps 5/91 Page 1 of 5. Dultmeier Sales for Omaha, NE or for Davenport, IA
PACER Pumps 5/91 Page 1 of 5 Item# Part No. Description Qty. 4 58-0721 NUT, BODY, Plated steel, 1/4-20 Hex... 10 58-0721 10 NUT, BODY, Stainless steel, 1/4-20 Hex... 10 6 58-0703 30 Bracket, polyester...
Model BPS-09-Npt. Stainless Steel Back Pressure Bypass Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-09-Npt Stainless Steel Back Pressure Bypass Valve
Suction Diffusers. Applications PROTECTION PUMP. Pressures to 790 PSIG Temperatures to 800ºF FEATURES MATERIALS END CONNECTIONS SIZE RANGES RATINGS
Applications Process Industry Metals and Mining Power Industry Water and Waste Chemical Industry Pulp and Paper Oil and Gas Suction Diffusers Pressures to 790 PSIG Temperatures to 800ºF FEATURES Filtration
FITTINGS COUPLINGS BAUER TRAVIS PATTERN CLAW VICTAULIC STRAINERS MUFF STEAM & GROUND JOINTS STORZ QRT CFA MFB & NSW FIRE BRIGADE
BAUER TRAVIS PATTERN CLAW VICTAULIC STRAINERS MUFF STEAM & GROUND JOINTS STORZ QRT CFA MFB & NSW FIRE BRIGADE HOSES PNEUMATICS HOSE REELS RUBBER HYDRAULICS ACCESSORIES & 139 HOSES Bauer Type B Couplings
9-43 3" 25.4 lbs. 3" 18" $ " 29.1 lbs. 4" 18" " 35.3 lbs. 5" 24" " 35.1 lbs. 6" 24"
Cast Aluminum Foot Valves Foot Valves have dresser type connection for use with O. D. tubing only. Complete assembly includes slotted strainer and safety ring and link for connection to suction tube. 9-13C...
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Owner's Manual. Model: ( ) (150 Gallon, 5.5 HP Skid Sprayer) Technical Specifications. General Information. Warranty/Parts/Service
Owner's Manual Model: -0 (00) (0 Gallon,. HP Skid Sprayer) Technical Specifications General Information Thank you for purchasing this product. The purpose of this manual is to assist you in operating and
List prices are for individual parts See following pages for illustration of parts by number
MODELS 2000, 2030 List prices are for individual parts See following pages for illustration of parts by number DESCRIPTION 1" to 1-1/4" 1-1/2" 2" to 2-1/2" 3" P/N PRICE P/N PRICE P/N PRICE P/N PRICE 1.
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Index. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP
(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material
INDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
Soil Cultivator Compact Utility Loader
Form Number Soil Cultivator Compact Utility Loader Model No. 23102-280000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity, and
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
RL-G70 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to
RL-G70 PARTS LIST # 102693I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to For older hoists use the following: Parts List No. 102692H for Serial Number 2485 to 6596 IF YOUR HOIST DOES NOT FALL WITHIN
S200-P Passport Series Fire Pump Service Parts List
Document Number Issue Date 04/08/13 Rev. Date 9/24/18 S200-P Passport Series Fire Pump Service Parts List Index: Component See Pages Body and Impeller 2, 3 Pedestal and Primers 4, 5 Cross Section Views
RVDRT & RVVRT Model 404 to 408
All-Star 00% Oil Free Rotary Vane Pump & Compressor RVDRT & RVVRT Model 0 to 08 0 0 0 ( version RVDRT* pcs ) 30 3 3 33 3 35 0 (version RVVRT ) 3 ( version RVDRT ) 50 60 ( version RVDRT ) 70 ( version RVVRT
Remanufactured Transmissions, Spare Parts, and Kits Catalog
S6-650 Spare Parts - Gearbox Housing Group 01.010 1319 301 025 Main Housing without Check Valve 005/006/045/046/049/050 1319 301 093 Main Housing without Check Valve 083/085/084/086 1319 301 084 Main Housing
B-34 Series Regulator Parts List. Effective June 2002
B-34 Series Regulator Parts List Effective June 2002 B-34N Reference Schematics B-34R Reference Schematics 2 Note: See Reference Schematics B-34 Series Service Regulators (Models N,R, M, D, IMN, IMR, IMRV,
Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No.
Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS Serial Number B30970200 & Higher Part No. 408920 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol
DI DI PUMP PARTS PRICE LIST
ITEM 1 2 2A 5050 Pump Body, 2" NPT Mech. Seal 1 40091 1 5050 Pump Body, 2" 150# RF Flg. Mech. Seal 1 40791 1 5050 Pump Body, 2" NPT, Packing 1 40088 1 5050 Pump Body, 2" 150# RF Flg., Packing 1 40793 1
P200 Pressure Regulator
P200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges P202 has internal relief valve for overpressure protection The P200 series pressure regulator is a manual, direct acting,
Diaphragm Valves. Product information
Diaphragm Valves Product information ART 510 Diaphragm Valve Weir Type Features Screwed BSP Taper Ductile Iron Body Rising Handwheel Indicator Bonnet Diaphragm Available Grade A - Natural Rubber Grade
Models: G-25, H-25 With Non-Metallic Pump Head
Parts Manual G25-991-2403B Models: G-25, H-25 With Non-Metallic Pump Head WANNER ENGINEERING, INC. W0193B 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (12) 332-581 FAX: (12) 332-937 TOLL-FREE FAX [US
Iron Check Valves Illustrated Index
Iron Check Valves Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Iron Body Silent Check
Parts List 12 MODEL T-140 and T-230 Mark II Turbo-Meters with Blade Tip Sensors
MP-1070DS Metering Systems Parts List 12 Model T-140 and T-230 Mark II Turbo-Meter with Blade Tip Sensors Parts List 12 MODEL T-140 and T-230 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures:
Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x Technical Data...3
Special Purpose Suction Diffuser - Iron Body Style PSD 125# Flanged 2 x 1-1/2 thru 20 x 20...2 Technical Data...3 Triple Duty Valve - Iron Body Style TDV 125# Flanged 2-20...4 Technical Data...5 Pressure
MODEL NO GALLON H.P. SKID SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS
5300431 MODEL NO. 9-150 150 GALLON - 5.5 H.P. SKID SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS Pressure Gauge - Adjustable Pressure Range Suction Line Filter Handgun With 25 Feet Of Handgun Hose
Technical Data TYPE A SERIES AIR ADJUSTED PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4011 OPERATING PRINCIPLE
Technical Data SD 4011 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 TYPE A SERIES AIR ADJUSTED PILOT PRINTED IN U.S.A. SD 4011/9504 Type A or A83 (wt 6 lb) Type A53 or A 85
Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters
MP-1073C Rev. 3 Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Working Pressures: 175, 275, 720 & 1440 psig Copyright 2001 Invensys
T200 Pressure Regulator
T200 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges T202 has internal relief valve for overpressure protection The T200 series pressure regulator is a manual, direct acting,
RL-H80 PARTS LIST # H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to
RL-H80 PARTS LIST # 102837H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
9-43 4" 29.1 lbs. 4" 18" lbs. 158 in " lbs. 202 in " lbs. 373 in "
Cast Aluminum Foot Valves Foot Valves have dresser type connection for use with O. D. tubing only. Complete assembly includes slotted strainer and safety ring and link for connection to suction tube. 9-13C...
Parts Lists UII Pump Parts
Parts Lists Parts Lists Waukesha Cherry-Burrell 006-04-05-08-UII Pump Parts Page 48 95-0305 September 009 006-04-05-08-UII Pump Parts PART NOTES 006-U Pump Body See Note 006-U Pump Body with Flush See
Models: G-25, H-25 With Metallic Pump Head
Parts Manual G5-99-40C Models: G-5, H-5 With Metallic Pump Head W09B WANNER ENGINEERING, INC. 04 Chestnut Avenue, Minneapolis, MN 55403 TEL: () 33-58 FAX: () 33-937 TOLL-FREE FAX [US only]: (800) 33-8
series 5100 GAS/PNEUMATIC DRIVEN INJECTION PUMP DESCRIPTION APPLICATIONS
TEXSTEAM Pumps series 5100 GAS/PNEUMATIC DRIVEN INJECTION PUMP Series 5100 LP Wt. 45 pounds Microswitch Option Available DESCRIPTION The 5100 Series performs accurately because (1) the head is designed
MAINTENANCE MANUAL. Covering Models: Series (1/4-10 ) S Series (1/4-1 ) Series (3-10 )
BFMM4000 1-09 MAINTENANCE MANUAL Covering Models: 40-200 Series (1/4-10 ) 40-200S Series (1/4-1 ) 40-700 Series (3-10 ) REDUCED PRESSURE PRINCIPLE (RPZ) BACKFLOW PREVENTERS 1/4" - 10" AND REDUCED PRESSURE
B/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
Ductile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
Goulds Process Pumps designed for severe corrosive services
Process Pumps designed for severe corrosive services Non-metallic vertical sump and process pumps designed for severe corrosive services Capacities to 5000 GPM (11 m3/hr) Heads to 275 feet (85m) Design
QGD-20/25/30 & QGD-40/50
QGD-0/5/0 & QGD-40/50 Direct Drive Rotary Screw Air Compressor Parts Manual This manual contains important safety information and should be made available to all personnel who operate and/or maintain this
UII Pump Parts
Parts Lists 030-034-040-UII Pump Parts Waukesha Cherry-Burrell. Page 54 95-03015 September 2009 030-034-040-UII Pump Parts 1 7 8 9 10 : 1. 2. 12. 12A. 13. PART 030-U2 Pump Body 1 See Note 1 1 030-U2 Pump
Parts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors
MP-1070BS Metering Systems Parts List 6 Model T-35 and T-57 Mark II Turbo-Meter with Blade Tip Sensors Parts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures: 175,