Models 9202C, 9203C, 9252C-C, and 9253C-C
|
|
- Joleen Bell
- 5 years ago
- Views:
Transcription
1 Models 0C, 03C, C-C, and 3C-C consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, decription, and complete model number. Reference numbers are used ONLY to identify parts in the drawing and are NOT to be used as order numbers Drain Plug C Pump Casing (Models 03C) (Ports: -/" x -/") 00-00C Pump Casing (Models 0C) (Ports: -/" x ") (ALL of the above casings include a stainless steel wear ring.) Impeller Nut 00-00P Impeller (Nylon) (std.) 00-00P Impeller (Poly) O-Ring Mechanical Seal (Optional Buna-N) Mechanical Seal (Standard Viton) Mechanical Seal (Optional Silicon Carbide) Seal Retainer 0-00 Slinger Ring 00-00C Mounting Flange Nameplate (Specify Model Number) Bolt Ball Bearing Key Pump Shaft Key Bearing Retainer Gasket Clutch (Models C-C, 3C-C) 0-00 Nameplate Washer (not shown) 0-00 Tag (not shown)
2 Model 0C consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, description, and complete model number. Reference numbers are used ONLY to identify parts in the drawing and are NOT to be used as order numbers Drain Plug 0-00C Pump Casing (Includes a stainless steel wear ring.) Impeller Nut 00-00C Impeller (Cast Iron) O-Ring Mechanical Seal (Optional Buna-N) Mechanical Seal (Standard Viton) Mechanical Seal (Optional Silicon Carbide) Seal Retainer 0-00 Slinger Ring 00-00C Mounting Flange Nameplate (Specify Model Number) Bolt Ball Bearing Key Pump Shaft Key Bearing Retainer Gasket 0-00 Washer Protective Cover 0-00 Nameplate Washer (not shown) 0-00 Tag (not shown)
3 Model 0C Drain Plug 0-00C Pump Casing (Includes a stainless steel wear ring.) Impeller Nut 0-00 Washer P Impeller (nylon) Gasket 0-00 O-Ring 0-00 Mechanical Seal (Standard Viton) Slinger Ring C Mounting Flange 0-00 Bolt Ball Bearing Key Pump Shaft 0-00 Bearing Retainer Protective Cover No consists of () Ref. Gasket, () Ref. O-ring and () Ref. Mechanical Seal.
4 Models 03C-R and 3C-CR consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and Ref. # Gasket. NOTE: When ordering parts, give quantity, part number, description, and complete model number. Reference numbers are used ONLY to identify parts in the drawing and are NOT to be used as order numbers Drain Plug 0-000C Pump Casing (Ports: -/" X -/") (Includes a stainlesssteel wear ring.) Impeller Nut P Impeller (Polypropylene) 00-00P Impeller (Nylon) O-Ring Mechanical Seal (Optional Buna-N) Mechanical Seal (Standard Viton) Mechanical Seal (Optional Silicon Carbide) Seal Retainer 0-00 Slinger Ring 00-00C3 Mounting Flange Nameplate (Specify Model Number) Bolt Ball Bearing Key Pump Shaft Key Bearing Retainer Gasket Clutch 0-00 Namplate Washer (not shown) 0-00 Tag (not shown)
5 Models 03C-SP consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and Ref. # Gasket. NOTE: When ordering parts, give quantity, part number, description, and complete model number. Reference numbers are used ONLY to identify parts in the drawing and are NOT to be used as order numbers Drain Plug 00-00C Pump Casing (Includes a stainless steel wear ring.) Impeller Nut 00-00P Impeller (Nylon) O-Ring Mechanical Seal (Optional Buna-N) Mechanical Seal (Standard Viton) Mechanical Seal (Optional Silicon Carbide) Seal Retainer 0-00 Slinger Ring 00-00C3 Mounting Flange Bolt Ball Bearing Key Pump Shaft Key Bearing Retainer Gasket Priming Port Plug Protective Cover 0-00 Namplate Washer (not shown) 0-00 Tag (not shown)
6 Model 0C-SP and 0C-BSP No consists of () Ref. Gasket, () Ref. O-ring and () Ref. Mechanical Seal Drain Plug 00-0C Pump Casing (standard) 00-0C Pump Casing (BSP) Impeller Nut 0-00 Washer P Impeller (nylon) Gasket 0-00 O-Ring 0-00 Mechanical Seal (Standard Viton) Slinger Ring C Mounting Flange 0-00 Bolt Ball Bearing Key Pump Shaft 0-00 Bearing Retainer Priming Port Plug (SP) Priming Port Plug (BSP) Protective Cover Include a stainless { steel wear ring.
Order online at
54 Order online at www.spraypartswarehouse.com 0C(S)-HMC,,, 4, 5 & -U and 0C(S)-SP- HM,,, 4, 5 Silicon Carbide Seal Kit No. 40-058 NOTE - Reference numbers are used ONLY to identify parts in the drawing
More informationS Series PACER Pumps. PACER Pumps 5/91 Page 1 of 5. Dultmeier Sales for Omaha, NE or for Davenport, IA
PACER Pumps 5/91 Page 1 of 5 Item# Part No. Description Qty. 4 58-0721 NUT, BODY, Plated steel, 1/4-20 Hex... 10 58-0721 10 NUT, BODY, Stainless steel, 1/4-20 Hex... 10 6 58-0703 30 Bracket, polyester...
More informationFKL PUMP HEAD ASSEMBLY
FKL Series Pumps 14 FKL PUMP HEAD ASSEMBLY (FOR COP PUMP HEAD ASSEMBLY, SEE PAGE 21) 25 24 51 28 12b 31 23 53 52 15 30 29 9b 26 10 3 5 12600616 7/1/2011 33 32 11b 36 FKL PUMP GEARBOX ASSEMBLY 39d 34 9a
More informationROLLER PUMPS. Hypro Roller Pumps. Max RPM. Max PSI Series - 6 Roller Pump Series - 5 Roller Pump Series - 4 Roller Pump
ROLLER Hypro Roller Pumps GPM PSI RPM 1502C 62 150 1000 1502N 62 150 1000 1502XL 62 150 1000 1700C 45 200 1000 1700N 45 200 1000 1700XL 45 200 1000 4001C-A 9 150 1800 1500 Series - 6 Roller Pump Cast-iron
More informationNESSA, Inc. PH FAX
centrifugal SPRAYER PUMPS ACE HYDRAULIC CAST IRON PUMPS HYD INLET OUTLET FMCHYD206 120 120 7 1 1/2 1 1/4 150 SERIES 31 $780 FMCHYD304 200 120 11 2 1 1/2 200 SERIES 38 892 FMCSC205F 240 100 13 3 2 205 SERIES
More informationFigure 15: FPH & FPHP 3542 and FPH 3552 Assembly
18 Figure 15: FPH & FPHP 3542 and FPH 3552 Assembly 1. Impeller Nut 2. Cover Nut 3. Cover Gasket 4. Housing Stud 5. Pump Housing 6. Impeller 7. Impeller Key 8. Rotating Seal o-ring 9. Seal Driver 10. Rotating
More informationModels: G-25, H-25 With Non-Metallic Pump Head
Parts Manual G25-991-2403B Models: G-25, H-25 With Non-Metallic Pump Head WANNER ENGINEERING, INC. W0193B 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (12) 332-581 FAX: (12) 332-937 TOLL-FREE FAX [US
More informationModels: G-25, H-25 With Metallic Pump Head
Parts Manual G5-99-40C Models: G-5, H-5 With Metallic Pump Head W09B WANNER ENGINEERING, INC. 04 Chestnut Avenue, Minneapolis, MN 55403 TEL: () 33-58 FAX: () 33-937 TOLL-FREE FAX [US only]: (800) 33-8
More informationCENTRIFUGAL PUMPS GAS ENGINE FTSP FEATURES APPLICATIONS SPECIFICATIONS
FEATURES Volute: Ductile iron rugged construction. Self-priming with priming and drain plugs. Removable front cover features a built-in check valve to facilitate priming Impeller: Cast iron semi-open,
More informationDrive Motor Type 3 (115/230V, 1 Phase TEFC) Motor Type 4 (230/460V, 3 Phase TEFC) Options Description Price Adders
PMU (Pump & Motor Unit) Prices 1000 4000 3000 Drive Motor Type 3 (115/230V, 1 Phase TEFC) Motor Type 4 (230/460V, 3 Phase TEFC) N HP 1725 rpm Consult Factory N/A L HP 1725 rpm Consult Factory Consult Factory
More informationGaskets. Fluid Handling Components. Bee Valve offers a full line of original and replacement gaskets to meet all your needs.
2009 Fluid Handling Components Gaskets Bee Valve offers a full line of original and replacement gaskets to meet all your needs. Bolted Tank Fitting Bulkhead Fitting Manifold System Cam Coupler Tank Lid
More informationMODEL: G-25 WITH METALLIC PUMP HEAD
PARTS MANUAL G25-991-2402B MODEL: G-25 WITH METALLIC PUMP HEAD IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts
More informationPACO PUMPS. A4b.2/A5b.2 4/06 Supercedes 9/05 TYPE OL, OLN, LN (PC 37, 38, 39, 12) REPLACEMENT PARTS GUIDE
TYPE OL, OLN, LN (PC 37, 38, 39, 12) REPLACEMENT PARTS GUIDE While In-Line Pumps are designed and built to provide maximum life while requiring minimum attention and service, replacement parts may at times
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationCASING COVER PLATE LUBRICATION GASKETS PRESSURE RELIFE VALVE SEAL OPTIONAL EQUIPMENT
Series: PFSPT Self-Priming Centifugal Pumps Size: x, Solids -1/ DISCHARGE x, lbs. Flange LIQUID TEMPERATURE 1 F CASING IMPELLER SHAFT SHAFT SLEEVE WEAR RING COVER PLATE FLAP VALVE Gray Iron ASTM A- Class
More informationSelf-Priming Centrifugal Pumps Refer to pump manual for General Operating and Safety Instructions.
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationSpecifications Information and Repair Parts Manual , , , &
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More information- CONTENTS SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX PERFORMANCE CHART 2CDX
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 120 203 PERFORMANCE CHART 200 204 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL
More informationFKL (25, 75, 150, 205, 250 & 400) Exploded View
3 FKL (5, 75, 50, 05, 50 & 400) Exploded View 3 4 5 6 7 8 9a0 a 3 4 5 6 7 34 35 8 9 0 40 4 4 43 36 37 38 39 44 45 46 65000005 Rev A 4 5 6 Fristam FKL Series Pumps 33 3 7 8 48 47 3 49 9 30 3 b 3 49 33 50
More informationGear Driven, Cast Iron
Gear Driven, Cast Iron Series 9000C-O CENTRIFUGAL PUMPS Kynar is a registered trademark of Arkema, Inc. Desmopan is a registered trademark of Bayer Aktiengesellschaft, Farbenfabriken. Viton is a registered
More informationTrash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
More informationSERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS
420 Third Street Piqua, Ohio 436-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WG6-2 SECTION 4A PAGE ISSUED 2/03 REPLACES 2/0 SELF-PRIMING CENTRIFUGAL PUMPS 300RPM -
More informationTable of Contents PRICE LIST PRODUCT PAGE PUMPS PWM Controlled Hydraulic Pumps A-4 GEMINI Dual Pump Kit A-5 FMC-75-HYD Series A-6 FMC-HYD Series A-6
PRICE LIST OCTOBER 2017 Table of Contents PRICE LIST PRODUCT PAGE PUMPS PWM Controlled Hydraulic Pumps A-4 GEMINI Dual Pump Kit A-5 FMC-75-HYD Series A-6 FMC-HYD Series A-6 FMC-150-HYD Series A-7 FMC-200-HYD
More informationHydracel High Pressure Pump
Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1
More information1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationSeries e-1510 REPLACEMENT PARTS FOR STANDARD DESIGN PUMPS PARTS LIST CP-208G-PL
Series e-1510 REPLACEMENT PARTS FOR STANDARD DESIGN PUMPS PARTS LIST CP-208G-PL PARTS LIST CP-208G-PL SERIES e-1510 Index Nameplate Data.................................................. Exploded Views...................................................
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G5--/4 G6--/4 SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 500RPM
More informationINDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT
PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More information1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More information855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps
855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to
More informationModel: D-10. Parts Manual D B. with non-metallic pump head WANNER ENGINEERING, INC. IMPORTANT
Parts Manual D10-991-2403B Model: D-10 with non-metallic pump head IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationHYPRO SPRAYER PUMPS FIMCO. Code # MFG Part # Description List Price
HYPRO SPRAYER PUMPS 82 IMPORTANT NOTE: Use cast iron pumps for general spraying. Use Ni-Resist and XL (Silver series) pumps for liquid fertilizers, soil fumigants and insecticides containing phosphates.
More informationEND SUCTION PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE
TYPE LFE LFE END SUCTION PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE This guide is valid for all Grundfos CBS Inc. products beginning with product code 21. Grundfos CBS Inc. End
More informationTrash Hog II Self Priming Solids Handling Centrifugal Pumps
Trash Hog II Self Priming Solids Handling Centrifugal Pumps Marlow Pumps ITT Industries Trash Hog II A Full Range of Product Features Industrial Duty Power End Provides rigid shaft support. Ample oil
More informationEBARA Self Priming Trash Pump. Type EFQT-EFQU
Type EFQT-EFQU Contents Section Page Model Designation 2 Features 3 Selection Chart 7 Dimension Drawings 20 Technical Data 24 Sectional View 25 1 Model Designation EFQ T 2 A MODEL TYPE EFQ self priming
More informationHYPRO SPRAYER PUMPS C-A Cast Iron Pump Less Coupler $ N-A Ni-Resist Pump Less Coupler $
HYPRO SPRAYER PUMPS 81 IMPORTANT NOTE: Use cast iron pumps for general spraying. Use Ni-Resist and XL (Silver series) pumps for liquid fertilizers, soil fumigants and insecticides containing phosphates.
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationHYPRO SPRAYER PUMPS FIMCO. Code # MFG Part # Description List Price
IMPORTANT NOTE: Use cast iron pumps for general spraying. Use Ni-Resist and XL (Silver series) pumps for liquid fertilizers, soil fumigants and insecticides containing phosphates. Repair Kits Include Super
More information2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationSERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and
More informationPart Numbering System
Part Numbering System Pg.1 To determine a part number, select the appropriate number from the categories listed below and insert them into the corresponding digits. For example: 1344.212 would be a Noryl
More informationFeatures: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
More informationS200-P Passport Series Fire Pump Service Parts List
Document Number Issue Date 04/08/13 Rev. Date 9/24/18 S200-P Passport Series Fire Pump Service Parts List Index: Component See Pages Body and Impeller 2, 3 Pedestal and Primers 4, 5 Cross Section Views
More informationParts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco Husky 3300 Parts 3300A, Aluminum 3 3 5 1a see page 3 1 1 13 1b see page 30 1b 1a 11 1 13 1c 1 1d 3 1 1 15 0 see page 35 3 5 1 Not used on some models. ti1a 3A011H For
More informationKG(X)3. Grinder Pumps. 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve. Total Head (FT) Capacity (GPM)
Grinder Pumps 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) The KEEN PUMP series centrifugal grinder pumps easily handle residential, commercial or industrial sanitary waste,
More informationITT. Goulds Pumps. Marlow Series Trash Hog II. Engineered for life. Wastewater. Self-Priming Solids Handling Centrifugal Pumps
Goulds Pumps Marlow Series Trash Hog II Self-Priming Solids Handling Centrifugal Pumps Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life TRASH HOG II A FULL RANGE OF PRODUCT
More informationParts List. and Kits PARTS LIST & KITS CONTENTS. Parts List. Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques
GRUNDFOS Pumps Corporation 3131 N. Business Park Avenue Fresno, CA 93727 Parts List and Kits CONTENTS Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques L-CR-SM-016 (6/99)
More informationMarlow Series Prime Line
REPAIR PARTS RPRIMELINE Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS REPAIR PARTS Prime Line M2P M4P Pumps 27 50 49 27 54 1 8 10 6 17 4 67 5 24 37 63 53 51 2 7 46 2 PAGE 2 Prime Line 2" Pump
More informationModels: D-12, G-12. Parts Manual D D WANNER ENGINEERING, INC.
Parts Manual D12-991-2402D Models: D-12, G-12 IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts or making inquiries
More information20EVP-A SERIES. Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents. Marlow Pumps. Marlow Pumps.
2EVP-A SERIES Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents PUMP: Heavy-duty cast iron construction, with 2 NPT female threaded, in-line suction and discharge ports. This
More informationD-040 PN 16 D-040-C PN 16. Combination Air Valve. Description. Applications. Operation. Main Features
D00.WTR.CAT.ENG0 D-00 PN 1 Water Supply D-00-C PN 1 Combination Air Valve Description The D-00 series Combination Air Valve has the features of both an air release valve and an air & vacuum valve. The
More informationParts List. and Kits PARTS LIST & KITS CONTENTS. Parts List. Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques
GRUNDFOS Pumps Corporation 3131 N. Business Park Avenue Fresno, CA 93727 Parts List and Kits CONTENTS Parts List Spare Part Kits Accessories Special Tools Standard Tools Tools for Torques L-CR-SM-012 NEW
More informationRoller Pump Comparisons
Roller Pump Comparisons Get up to 10 times longer pump life with Hypro Silver Series XL Roller pumps! These three pump housings were photographed after being tested with a 30:1 mix of water and Roundup
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More informationINSTRUCTION MANUAL AND PARTS LIST FOR A3D SERIES PUMPS
TM INSTRUCTION MANUAL AND PARTS LIST FOR A3D SERIES PUMPS WARNING This Instruction Manual and General Instructions Manual SRM00046, should be read thoroughly prior to pump installation, operation or maintenance.
More informationDischarge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
More informationSection 4 - Selection Procedure. Section 5 - Performance Data. Section 6 - Technical Data
RANGE(S) M Section 4 - Selection Procedure Section 5 - Performance Data Section 6 - Technical Data PUMP RANGE M SECTION 4 MODEL ALL PAGE 1 FEATURES & BENEFITS FEATURE 1. Three basic pump sizes with a capacity
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationSubmersible Stainless Steel Semi-Vortex Pumps Pumps
Technical Data Right Submersible Stainless Steel Semi-Vortex Pumps Pumps EBARA PUMPS AUSTRALIA PTY. LTD. DWVOX_Techdata_SS_ Right_Techdata_DS_ CONTENTS -SPECIFICATIONS Page Features & Applications 100
More informationRP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS 300 SECTIONAL VIEW
More informationD 40 ALUMINIUM (CLAMPED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
More informationPage 1 - Gearbox & Bearing Housing. Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2)
Spare Parts List Hy~Line Contents Page 1 - Gearbox & Bearing Housing Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2) Page 4 - Ports Page 5 - Single Mechanical
More informationKP-C Series. Close Coupled End Suction Centrifugal Pumps. Installation, Operation and Maintenance
KP-C Series Close Coupled End Suction Centrifugal Pumps Installation, Operation and Maintenance PUMP MODEL NOMENCLATURE KP - 8 x 6 x 16 - E C - AI - BCM Pump Series Suction Pipe Size (in) Discharge Pipe
More information250300APR DC coated and 316 stainless steel
250/300mm APR Self Priming (dc) Series Pump Heavy Duty Applications Specialised Design Features Suction flange - heavy duty 300 mm or 250 mm hole patterns to AS2129 E Discharge flange - heavy duty 250
More informationBerkeley Cast Iron Impeller B6EXQBH SAE ENGINE MOUNT. Flanged Case, Packing Construction. Table I. Page Date March 4, 2013 Supersedes 01/01/04
BEXQBH Page. 8 83 84 ( X scale ) 3 3 5A 8 B/M Mtg. Spline B00 H05398 H053 -/-0T 3" Kit available for this model, P/N B9. Refer to Supplement-C of this section for list of components included with kit.
More information- CONTENTS SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART IDROGO PERFORMANCE CHART IDROGO
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHART 201 PERFORMANCE CHART 40 202 PERFORMANCE CHART 80 203 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 SECTIONAL VIEW 301 MECHANICAL SEAL 302 DIAGRAM
More informationGENERAL DIMENSIONS OF SMF PUMPS. Capacity upto 7,000 m /hr Head upto 45 m. Range :
Fluid Technology from Holland GENERAL DIMENSIONS OF SMF PUMPS Features : Closed or Semi-open Impeller Different Orientation of Delivery Nozzle. Vertical Execution The SMF series are single-stage centrifugal
More informationENGINE DRIVEN CENTRIFUGALS. franklinwater.com
ENGINE DRIVEN CENTRIFUGALS Franklin Electric has the gas engine pump for your irrigation, construction, mining, commercial, municipal, and other applications. franklinwater.com GAS ENGINE FBSGF VOLUTE:
More informationMODELS: G-20, G-21, G-22
PARTS MANUAL G20-991-2402A IMPORTANT Record your pump model number and serial number here for easy reference: Model No. MODELS: G-20, G-21, G-22 Serial No. Date of Purchase When ordering parts or making
More informationProcess Equipment. Air-Operated Pumps for Process Industries
Process Equipment Air-Operated s for Process Industries Superior ing Technology 55 Gallon Drum Transfer and Supply from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 THERMAL INSULATION 301 MECHANICAL SEAL 302 BEARINGS DIMENSIONS and WEIGHT 400 PUMP 400 PACKING 401
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY amd CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 203 PERFORMANCE CURVE 120 204 PERFORMANCE CURVE 200 205 - CONSTRUCTIONS
More informationOperating and Maintenance Manual Gas/Diesel Engine Powered Self-Priming Centrifugal Pumps Series
Operating and Maintenance Manual Gas/Diesel Engine Powered Self-Priming Centrifugal Pumps 4300 Series Operating Manual Contents: Model Number/Serial Number/Safety Information Pg. 1 Safety Information (Con
More informationITT. Goulds Pumps. Marlow Series 20EVP. Engineered for life. Commercial Water
Goulds Pumps Marlow Series 2EVP Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents STANDARD UNIT INCLUDES: Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered
More informationHigh Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationBERKELEY SSCX SERIES CENTRIFUGAL PUMPS
BERKELEY SSCX SERIES CENTRIFUGAL PUMPS WWW.BERKELEYPUMPS.COM REMARKABLE RELIABILITY High-head performance and quiet operation join corrosion-resistant dependability with Berkeley SSCX Series centrifugal
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationHigh Head Centrifugal Pedestal Pumps
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationB/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationGH General Horizontal, Close Coupled and Frame Mounted Pumps
GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling
More informationD-040 PN 16 D-040-C PN 16. Combination Air Valve. Description. Applications. Operation. Main Features
D-00 PN 1 Water Supply D-00-C PN 1 Combination Air Valve EnC-D00WTR-11 Description The D-00 series Combination Air Valve has the features of both an air release valve and an air & vacuum valve. The air
More informationCVM. EBARA PUMPS EUROPE S.p.A. MULTISTAGE CENTRIFUGAL PUMPS
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE A (UP TO 0.6 kw) 203 PERFORMANCE CURVE A (FROM 0.75 kw UP TO 1.1 kw) 204 PERFORMANCE CURVE
More informationShaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last
Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run
More informationHYPRO SPRAYER PUMPS C-A Cast Iron Pump Less Coupler $ N-A Ni-Resist Pump Less Coupler $
HYPRO SPRAYER IMPORTANT NOTE: Use cast iron pumps for general spraying. Use Ni-Resist and XL (Silver series) pumps for liquid fertilizers, soil fumigants and insecticides containing phosphates. Repair
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEALS 303 DIAGRAM AND ELECTRIC CONNECTIONS 304
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 PERFORMANCE CHART A (up to 0.6 kw) 203 PERFORMANCE CHART A (from 0.75 kw up to 1.1 kw) 204 PERFORMANCE CHART A (1.3 kw) 205 PERFORMANCE
More informationHYPRO SPRAYER PUMPS or 1000 RPM Quick Coupler. Fimco Mfg.
HYPRO SPRAYER IMPORTANT NOTE: Use cast iron pumps for general spraying. Use Ni-Resist and XL (Silver series) pumps for liquid fertilizers, soil fumigants and insecticides containing phosphates. Repair
More informationFabri-Valve. CF33/CF133 Ported Slide Gate Valve
Fabri-Valve CF33/CF133 Ported Slide Gate Valve CF33/CF133 Ported Slide Gate Valve Fabri-Valve Figures C33 / C133 / F33 / F133 are bi-directional soft seated, slide gate valves designed for on/off service
More informationPage - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART COMPACT A 204 PERFORMANCE CHART COMPACT B 205
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 CURVE SPECIFICATIONS 203 PERFORMANCE CHART A 204 PERFORMANCE CHART B 205 - CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEALS 301
More informationNoryl Series and Polypropylene Series
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationMARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS
MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS W W W. M A R C H P U M P. C O M MARCH PUMPS Why a magnetic drive pump? A magnetic drive pump is sealless, preventing any leakage that is normally associated
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationITT. Goulds Pumps. 5GB, 7GB, 10GB, 18GB, 25GB, 33GB High Pressure Multi-Stage Booster Pump. Engineered for life. Residential Water Systems FEATURES
Goulds Pumps GB, 7GB, 1GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
More information