MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS

Size: px
Start display at page:

Download "MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS"

Transcription

1 MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS

2 W W W. M A R C H P U M P. C O M MARCH PUMPS Why a magnetic drive pump? A magnetic drive pump is sealless, preventing any leakage that is normally associated with a conventional seal pump. Not only does the absence of a seal prevent the leakage of potentially dangerous and expensive liquids, it reduces maintenance time spent on the pump. In any magnetic drive pump, there are only two moving parts, the drive magnet and the impeller. With only two moving parts, there is little to break in the pump. The simpler the pump, the less chance there is for failure. A magnetic drive pump is your answer for a long life, dependable, reliable pump. Why a March magnetic drive pump? March has been manufacturing magnetic drive pumps outside of Chicago since 9. With nearly half a century of experience, there are few applications that March hasn t encountered. Our pumps are available in a wide range of materials that ensure chemical compatibility, and if you have an application that requires a special pump, our engineering department is here to help. March is an US manufacturer, independently owned, and run by individuals with decades of engineering. A March magnetic drive pump is a pump you can trust in. Potential applications: Chemical Transfer Heat Transfer Computer cooling Refrigeration Systems Ice Makers Vending Equipment Kidney Dialysis Electrostatic Painting Arc Furnace Cooling Marine Air Conditioning Systems Hospital Thermal Blankets Microchip Manufacturing Aquariums Home Brewing Fountains Solar Systems All technical information in this catalog is for HZ, for information on HZ please visit our web site Modifications may be necessary when pumping a liquid with a specific gravity, viscosity, or temperature which is different than ambient water.

3 l.p.m. L.P.M..... model A-MD-/ model AC-A-MD-/ SERIES.. model AC-A-MD SERIES SERIES AC-A-MD-/ AC-A-MD-/ AC-C-MD A-MD-/ A-MD-/ C-MD U-MD Max Flow. GPM GPM GPM. GPM GPM GPM GPM Max Head. Feet. Feet. Feet. Feet. Feet. Feet. Feet Inlet /" OD /" OD /" MPT /" OD /" OD /" MPT Screen Outlet /" OD /" OD /" MPT /" OD /" OD /" MPT /" MPT HP / / / / / / / RPM Volts or or or or or or or Phase Amps Motor Type Air Cooled Air Cooled Air Cooled TE/SUB TE/SUB TE/SUB TE/SUB Elec. Connect. Leads Leads Leads Cord Cord Cord Cord Max Int. Press. PSI PSI PSI PSI PSI PSI PSI Max Liquid Temp. 9 F 9 F 9 F 9F Open Air, F Sub 9F Open Air, F Sub 9F Open Air, F Sub 9F Open Air, F Sub Weight Packed. lbs.. lbs.. lbs.. lbs.. lbs.. lbs.. lbs. Nylon, Buna N, SS, / Nylon, Buna N, SS, / Nylon, Buna N, SS, / Nylon, Buna N, SS, / Nylon, Buna N, SS, / Nylon, Buna N, SS, / Nylon, Buna N, SS, / When submerged in solution, also in contact: epoxy, noryl, cycolac, delrin, cord

4 model LC-CP-MD l.p.m. L.P.M. SERIES model AC-CP-MD 7 model BC-CP-MD Brush model BC-CP-MD Brushless 7 W W W. M A R C H P U M P. C O M SERIES SERIES CP-MD LC-CP-MD AC-CP-MD BC-CP-MD BC-CP-MD Brush-Type BC-CP-MD Brushless Max Flow GPM GPM GPM GPM GPM GPM Max Head Feet Feet Feet Feet Feet Feet Inlet /" FPT and /" MPT /" FPT and /" MPT /" FPT and /" MPT /" FPT and /" MPT /" FPT and /" MPT /" FPT and /" MPT Outlet /" MPT /" MPT /" MPT /" MPT /" MPT /" MPT HP / / / / / RPM Volts or or or or V or V Phase DC DC V (-) or V (-) Amps Motor Type SUB Blue TE/SUB Maroon Air Cooled Blast Cooled Air Cooled Air Cooled Elec. Connect. Cord Cord Cord Cord Leads Leads Max Int. Press. PSI PSI PSI PSI PSI PSI Max Liquid Temp. F F 9 F 9 F 9 F 9 F Weight Packed lbs. lbs.. lbs.. lbs. lbs. lbs., Ceramic, Ceramic, Ceramic Smooth inlet/outlet available When submerged, also in contact: Epoxy, Buna N, and cord

5 l.p.m. L.P.M. model LC-CP-MD model AC-CP-MD SERIES 7 9 model BC-CP-MD SERIES SERIES LC-CP-MD AC-CP-MD BC-CP-MD BC-K-MD Max Flow. GPM GPM GPM GPM Max Head 9 Feet. Feet. Feet. Feet Inlet /" FPT /" FPT /" FPT /" FPT Outlet /" MPT /" MPT /" MPT /" MPT HP / / / / RPM Volts or or or or Phase Amps Motor Type TE/SUB Maroon Air Cooled Blast Cooled Blast Cooled Elec. Connect. Cord Leads Leads Leads Max Int. Press. PSI PSI PSI 7 PSI Max Liquid Temp. F 9 F 9 F F Weight Packed. lbs. 7 lbs. lbs. lbs. Epoxy, Cupric Nickel, Buna N, Ceramic Ceramic Magent, Ceramic, Buna N Kynar, Smooth inlet/outlet available

6 model MDXT- model MDX-MT MDX W W W. M A R C H P U M P. C O M model MDX--/ model TE-MDK-MT SERIES MDX MDXT- MDX- / MDX- / MDX-MT MDK-MT TE-MDX-MT TE-MDK-MT Max Flow. GPM. GPM. GPM GPM GPM GPM GPM Max Head 9 Feet 9 Feet 9 Feet Feet Feet 7 Feet 7 Feet Inlet /" FPT /" OD /" OD /" MPT /" MPT /" MPT /" MPT Outlet /" FPT /" OD /" OD /" MPT /" MPT /" MPT /" MPT HP / / / / / / / RPM Volts or or or or or or or Phase Amps /.. /. Motor Type Air Cooled Air Cooled Air Cooled Air Cooled Air Cooled TEFC TEFC Elec. Connect. Cord Cord Cord Cord Cord Conduit Box Conduit Box Max Int. Press. PSI PSI PSI 7 PSI 7 PSI 7 PSI 7 PSI Max Liquid Temp. 9 F 9 F 9 F F F F F Weight Packed lbs. lbs. lbs.. lbs.. lbs. lbs. lbs. l.p.m. L.P.M. 7 9 Ceramic Shaft & Thrust Washer, Buna N, Ceramic Kynar, Ryton/ Teflon/, Buna N, Ceramic Kynar, Ryton/ Teflon/, Buna N, Ceramic SERIES MDX MDX-/ MDX-/ MDXT Max Flow GPM GPM 7 GPM Max Head 7 Feet 7 Feet 7 Feet Inlet /" OD /" OD /" FPT Outlet /" OD /" OD /" MPT HP / / / RPM Volts or or or Phase Amps Motor Type Air Cooled Air Cooled Air Cooled Elec. Connect. Cord Cord Cord Max Int. Press. PSI PSI PSI Max Liquid Temp. 9 F 9 F 9 F Weight Packed. lbs.. lbs.. lbs. Ryton, Kynar, Buna N, Ceramic Kynar, Kynar, Buna N, Ceramic Ryton, Ceramic Shaft & Thrust Washer, Buna N, Ceramic Kynar,

7 l.p.m. L.P.M model AC-C-MD model AC-C-MD model TE-K-MD SERIES & model TE-S-MD SERIES & SERIES & AC-C-MD BC-C-MD C-MD LC-C-MD AC-C-MD TE-C-MD TE-K-MD TE-S-MD Max Flow GPM GPM. GPM. GPM 7 GPM GPM GPM GPM Max Head. Feet. Feet 7 Feet 7 Feet 7 Feet 9 Feet 9 Feet 9 Feet Inlet " FPT " FPT " FPT " FPT " FPT " FPT " FPT " FPT Outlet /" MPT /" MPT /" MPT /" MPT /" MPT /" MPT /" MPT /" MPT HP / / / / / / / / RPM Volts or or or or or or or or Phase Amps Motor Type Air Cooled Blast Cooled SUB Blue TE/SUB Maroon Air Cooled TEFC TEFC TEFC Elec. Connect. Cord Cord Cord Cord Cord Conduit Box Conduit Box Conduit Box Max Int. Press. PSI PSI PSI PSI PSI PSI 7 PSI PSI Max Liquid Temp. 9 F 9 F F F 9 F 9 F F F Weight Packed. lbs.. lbs. lbs. lbs. 9. lbs.. lbs.. lbs. lbs. Polyproplene, Ceramic, Ceramic, Buna N Polyproplene, Epoxy, Ceramic, Buna N, Cord Ceramic, Buna N, Ceramic, Buna N, Ceramic Polyproylene, /Kynar,, Viton, Ceramic, Bushing Smooth inlet/outlet available 7

8 SERIES. & model TE-.C-MD-AC model TE-.C-MD model TE-.S-MD l.p.m. L.P.M. model TE-T-MD W W W. M A R C H P U M P. C O M SERIES. & SERIES. & TE-.C-MD TE-.K-MD TE-.S-MD TE-T-MD TE-K-MD Max Flow GPM GPM GPM GPM GPM Max Head FT FT FT 9 FT 9 FT Inlet " FPT " FPT " FPT " FPT " FPT Outlet /" MPT /" MPT /" MPT /" MPT /" MPT HP / / / / / RPM Volts / or / / or / / or / / or / / or / Phase or or or or or Amps (./.) (./.) (./.) (./.) (./.) (./.) (7./.7) (./.7) Motor Type TEFC TEFC TEFC TEFC TEFC (7./.7) (./.7) Elec. Connect. Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Max Int. Press. PSI 7 PSI PSI PSI 7PSI Max Liquid Temp. 9 F F F 9 F F Weight Packed. lbs. lbs. 9 lbs.. lbs.. lbs. Kynar, Ceramic, Viton Viton, Ceramic, Bushing Ryton,, Teflon/ Ryton/ Bushing Kynar,, Bushing Air Cooled motor available Drip Proof motor available

9 l.p.m. L.P.M model TE-7R-MD model TE-7S-MD model SP-TE-7K-MD (Self-Priming) SERIES 7 & model TE-7.K-MD SERIES 7 & 7. SERIES 7 & 7. TE-7R-MD TE-7K-MD TE-7S-MD SP-TE-7P-MD SP-TE-7K-MD TE-7.P-MD TE-7.K-MD Max Flow GPM GPM GPM GPM GPM GPM GPM Max Head FT FT 7. FT FT FT FT FT Inlet /" FPT /" FPT /" FPT /" FPT /" FPT " MPT " MPT Outlet " MPT " MPT " MPT " MPT " MPT /" MPT /" MPT HP / / RPM Volts / or / / or / / or / / or / / or / / / Phase or or or or or Amps (9.7/.9) (./.) (9.7/.9) (./.) (./.9) (/.) (./.9) (/.) (./.9) (/.).,.7.,.7 Motor Type TEFC TEFC TEFC TEFC TEFC TEFC TEFC Elec. Connect. Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Max Int. Press. PSI 7 PSI PSI PSI PSI PSI PSI Max Liquid Temp. 9 F F F 9 F 9 F 9 F 9 F Weight Packed. lbs.. lbs. 9. lbs. 7 lbs. 7 lbs. lbs. lbs. Suction Lift Feet Feet Ryton, Ceramic, /Bushing, Viton Available with HP motor Filled Kynar, Bushing, Viton Available with HP motor, Bushing, Viton Ceramic, Bushing, Viton Filled Kynar, Ceramic, Bushing, Viton Ceramic, Bushing, Viton Natural Kynar, Ceramic, Bushing, Viton

10 l.p.m. SERIES & model TE-C-MD model TE-S-MD 7 model TE-K-MD W W W. M A R C H P U M P. C O M SERIES & SERIES & TE-C-MD TE-K-MD TE-S-MD TE-C-MD-HF TE-K-MD-HF TE-K-MD Max Flow GPM GPM GPM GPM GPM GPM Max Head 9 Feet 9 Feet 9 Feet 9 Feet 9 Feet Feet Inlet " MPT " MPT " MPT " MPT " MPT " MPT Outlet /" MPT /" MPT /" MPT /" MPT /" MPT " MPT HP RPM Volts / / / / / / Phase Amps Motor Type TEFC TEFC TEFC TEFC TEFC TEFC Elec. Connect. Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Max Int. Press. PSI 7 PSI PSI PSI 7 PSI 7 PSI Max Liquid Temp. 9 F F F 9 F F 9 F Weight Packed lbs. lbs. lbs. 7 lbs. 7 lbs. lbs. Filled Kynar, Viton, Teflon/Ryton/ Bushing, Ceramic Filled Kynar,, Bushing Viton, Ceramic, Bushing Filled Kynar, Viton, Teflon/Ryton/ Bushing, Ceramic Filled Kynar,, Bushing Filled Kynar,, Bushing Available with HP Motor

11 l.p.m. L.P.M model 9- model 9-7 SERIES model 9-9 SERIES 9 9- Brush-Type SERIES 9 9- Brush-Type 9- Brush-Type 9- Brush-Type 9-7 Brushless 9- Brushless 9-9 Brushless 9- Brushless Max Flow.7 GPM.7 GPM.7 GPM.7 GPM.7 GPM.7 GPM.7 GPM.7 GPM Max Head. Feet. Feet. Feet. Feet. Feet. Feet. Feet. Feet Inlet /" FPT /" FPT /" FPT /" FPT /" FPT /" FPT /" FPT /" FPT Outlet /" OD /" OD /" OD /" OD /" OD /" OD /" OD /" OD HP / / / / / / / / RPM Volts (7-) (-) (7-) (-) Phase DC DC DC DC DC DC DC DC Amps.... Motor Type Air Cooled SUB Air Cooled SUB Air Cooled Air Cooled TE/SUB TE/SUB Elec. Connect. Leads Leads Leads Leads Leads Leads Leads Leads Max Int. Press. PSI PSI PSI PSI PSI PSI PSI PSI Max Liquid Temp. 9 F F SUB 9 F F SUB 9 F 9 F 9F Open Air, F SUB 9F Open Air, F SUB Weight Packed lbs.. lbs. lbs.. lbs. lbs. lbs.. lbs.. lbs. Noryl, Nylon, Buna N,,Delrin, Epoxy and Motor Leads Noryl, Nylon, Buna N,,Delrin, Epoxy and Motor Leads Noryl, Nylon, Buna N,,Delrin, Epoxy and Motor Leads Noryl, Nylon, Buna N,,Delrin, Epoxy and Motor Leads Noryl, Nylon, Buna N,,Delrin, Epoxy and Motor Leads Noryl, Nylon, Buna N,,Delrin, Epoxy and Motor Leads Noryl, Nylon, Buna N,,Delrin, Epoxy and Motor Leads Noryl, Nylon, Buna N,,Delrin, Epoxy and Motor Leads

12 ,,,, W W W. M A R C H P U M P. C O M model CP-MD, model Dual Head, model model CP-MD, model Dual Head,,,, SERIES,,,, CP-MD CP-MD Dual Head Dual Head Max Flow. GPM GPM. GPM GPM GPM Max Head Feet Feet. Feet. Feet Feet Inlet /" MPT /" MPT /" OD /" OD /" OD Outlet /" MPT /" MPT 7/" OD /" OD /" OD HP / / / / / RPM Volts or / / or Phase or Amps.7.7./../ Motor Type Air Cooled TEFC Air Cooled Air Cooled Air Cooled Elec. Connect. Cord Conduit Box Leads Leads Leads Max Int. Press. PSI PSI PSI PSI PSI Max Liquid Temp. 9 F 9 F 9 F 9 F 9 F Weight Packed lbs. lbs. lbs.. lbs. lbs. Buna N, Cermaic, Ceramic Smooth Inlet/Outlet available 7 l.p.m. 7 9 Kynar Filled,, Ethylene Propylene, Ceramic, Steel Viton, Ceramic, Ceramic

13 9 SERIES 9 9-PL 9-BR-C Max Flow. GPM GPM Max Head. Feet. Feet Inlet /" MPT /" MPT Outlet /" MPT /" MPT HP / / RPM 7 7 Volts or or Phase Amps Motor Type Air Cooled Air Cooled Elec. Connect. Conduit Box Conduit Box Max Int. Press. PSI PSI Max Liquid Temp. SERIES 9 9-PL Brush-Type 9-BR-C Brush-Type 7 9 Available in Polysulfone and Bronze Available in Polysulfone, Bronze, and Steel L.P.M. l.p.m. 9-PL-HS 9-BR-HS-C 9- BR-HS-C Brush-Type 9-PL-HS- C Brush-Type 9-PL-HS- C Brushless Max Flow GPM GPM GPM 7. GPM GPM GPM 7. GPM Max Head 7. Feet 7. Feet. Feet. Feet. Feet. Feet. Feet Inlet /" MPT /" MPT /" MPT /" MPT /" MPT /" MPT /" FPT & /" MPT Outlet /" MPT /" MPT /" MPT /" MPT /" MPT /" MPT /" MPT HP / / / / / / - RPM Volts or or or or or or (-) or (-) Phase DC DC DC DC DC Amps Motor Type Air Cooled Air Cooled Air Cooled Air Cooled Air Cooled Air Cooled Air Cooled Elec. Connect. Leads Leads Conduit Box Cord Leads Leads Leads Max Int. Press. PSI PSI PSI PSI PSI PSI PSI Max Liquid Temp. F F F F F F F Weight Packed. lbs.. lbs. lbs. lbs.. lbs.. lbs. lbs. F F Weight Packed lbs. lbs. Polysulfone, Teflon, Silicone, Polysulfone, Teflon, Silicone, Bronze, Steel, Teflon, Silicone, Ryton/ Teflon/ Bronze, Steel, Teflon, Silicone, Ryton/ Teflon/ Polysulfone, Teflon, Silicone, Bronze, Steel, Teflon, Silicone, Ryton/ Teflon/ Polysulfone, Teflon, Silicone, Bronze, Steel, Teflon, Silicone, Ryton/ Teflon/ Polysulfone, Teflon, Silicone, SERIES

14 ,, model -CI-T model -CI L.P.M. l.p.m. 9 7 model -BR-C W W W. M A R C H P U M P. C O M,,, -CI -CI-T -CI -CI-T -PL -BR -PL-C -BR-C Max Flow GPM 9 GPM GPM GPM 7 GPM 7 GPM GPM GPM Max Head. Feet. Feet. Feet. Feet. Feet. Feet. Feet. Feet Inlet Flange /" FPT Flange /" FPT /" MPT /" MPT /" FPT, /"MPT /" MPT Outlet Flange /" FPT Flange /" FTP /" MPT /" MPT /" MPT /" MPT HP / / / / / / / / RPM Volts or or or or or or or or Phase Amps.7//.7/ Motor Type Air Cooled Air Cooled Air Cooled Air Cooled Air Cooled Air Cooled Air Cooled Air Cooled Elec. Connect. Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Max Int. Press. PSI PSI PSI PSI PSI PSI PSI PSI Max Liquid Temp. F F F F F F F F Weight Packed lbs.. lbs. lbs.. lbs. lbs. lbs. lbs. lbs. Cast Iron, Steel, Ryton, Ceramic, Nitrile/Fibre Gasket Cast Iron, Steel, Ryton, Ceramic, Nitrile/Fibre Gasket Cast Iron, Ryton, Ceramic,, Nitrile/ Fibre Cast Iron, Steel, Ryton, Ceramic,, Nitrile/ Fibre Polysulfi, Steel, Teflon, Silicone, Bronze, Steel, Teflon, Silicone, Polysulfi, Steel, Teflon, Silicone, Bronze, Steel, Teflon, Silicone, Available in Bronze Available in Steel

15 SEALED SEALED & METERING SEALED & METERING & METERING -C -U C U - - Max Flow. GPM. GPM. GPM. GPM to cc/min to cc/min to cc/min Max Head 7 Feet 7 Feet. Feet. Feet PSI PSI PSI Inlet /" MPT Screen /" MPT Screen /" FPT /" FPT /" FPT Outlet /" MPT /" MPT /" MPT /" MPT /" MPT /" MPT /" FPT HP /7 /7 / / / / / RPM 7 Volts or or or or or or or Phase Amps Motor Type TE/SUB SUB TE/SUB SUB Air Cooled Air Cooled Air Cooled Elec. Connect. Cord Cord Cord Cord Cord Cord Cord Max Int. Press. PSI PSI PSI PSI PSI PSI 9 PSI Max Liquid Temp. F F F F 9 F 9 F 9 F Weight Packed lbs. lbs. lbs. lbs.. lbs.. lbs. lbs. C U Max Flow. GPM. GPM Max Head. Feet. Feet Inlet /" MPT SCREEN Outlet /" MPT /" MPT HP /7 /7 RPM Volts or or Phase Amps Motor Type TE/SUB SUB Elec. Connect. Cord Cord Max Int. Press. PSI PSI Max Liquid Temp. F F Weight Packed lbs. lbs. Nylon, Steel, Viton, Cork & Neoprene Gaskets, Aluminum Bracket Nylon, Steel, Viton, Cork & Neoprene Gaskets, Aluminum Bracket Nylon, Delrin, Noryl, Steel, Viton, Cork & Neoprene Nylon, Delrin, Noryl, Steel, Viton, Cork & Neoprene Nylon, Steel, Viton, Cork & Neoprene Gaskets, Aluminum Bracket 9 7 Nylon, Delrin, Noryl, Steel, Viton, Cork & Neoprene 7 Ryton, Viton, L.P.M. l.p.m. Ryton, Viton,.... Ryton, Viton, SEALED & METERING Available in Polysulfil and Bronze Available in Polysulfil, Bronze, and Steel

16 AIR MOTORS AIR MOTORS AIR MOTORS MDXT- MDXT-MT BC-CP-MD BC-CP-MD BC-C-MD TE-S-MD Max Flow GPM 9 GPM 7. GPM. GPM GPM GPM Max Head 9 Feet Feet Feet Feet Feet Feet Inlet /" FPT /" MPT /"FTP & /" MPT /" FPT " FPT " FTP Outlet /" FPT /" MPT /" MPT /" MPT /" MPT /" MPT HP / / / / / / Max Air PSI PSI PSI 9 PSI PSI PSI CFM Required 7 MARCH MANUFACTURING, INC. 9 Pickwick Avenue Glenview, Illinois - P F SINCE 9

NO SHAFT SEAL, LESS PROBLEMS UP TO 200GPM AND 160 FEET MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS

NO SHAFT SEAL, LESS PROBLEMS UP TO 200GPM AND 160 FEET MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS NO SHAFT SEAL, LESS PROBLEMS UP TO 200GPM AND 160 FEET MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS MARCH PUMPS Why A ic Drive Pump A magnetic drive pump is sealless, preventing any leakage that is normally

More information

C A T A L O G MARCH PUMPS

C A T A L O G MARCH PUMPS C A T A L O G MARCH PUMPS C H E M I C A L O E M I N D U S T R I A L H Y D R O N I C S O L A R P A G E 2 MARCH SEAL- LESS MAGNETIC DRIVE PUMPS The ultimate in reliable performance for chemical, OEM, indtrial,

More information

CA T ALOG MARCH C H E M I C A L O E M I N D U S T R I PUMPS A L H Y D R O N I C S O L A R

CA T ALOG MARCH C H E M I C A L O E M I N D U S T R I PUMPS A L H Y D R O N I C S O L A R C A T A L O G MARCH PUMPS C H E M I C A L O E M I N D U S T R I A L H Y D R O N I C S O L A R P A G E 2 MARCH SEAL- LESS MAGNETIC DRIVE PUMPS The ultiate in reliable perforance for cheical, OEM, indtrial,

More information

KoolAir PM500. Fully Submersible. Marine Coolant Pump. Pump Features:

KoolAir PM500. Fully Submersible. Marine Coolant Pump. Pump Features: KoolAir PM500 Marine Coolant Pump Fully Submersible Pump Features: n Pumps 500 gallons/hr n Run Dry and Thermal Overload Protection n In a Run Dry scenario, the pump will shut down. Simply let it cool

More information

MAX FLUID TEMPERATURE

MAX FLUID TEMPERATURE Operation is similar to standard centrifugal pumps, except the impeller is driven with a magnetic coupling, eliminating the need for a shaft seal. Magnetic drive pumps must be used where flooded suction

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G5--/4 G6--/4 SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 500RPM

More information

Product Catalog. Utility Small Submersible Specialty Magnetic Drive. Engineered Products. Industrial

Product Catalog. Utility Small Submersible Specialty Magnetic Drive. Engineered Products. Industrial ndustrial Product Catalog Utility Small Submersible Specialty Magnetic Drive Wastewater Water Systems HVAC Industrial Engineered Products hat's Hot! Hard-Working Pumps for Commercial, Industrial and Home

More information

SERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS 420 Third Street Piqua, Ohio 436-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WG6-2 SECTION 4A PAGE ISSUED 2/03 REPLACES 2/0 SELF-PRIMING CENTRIFUGAL PUMPS 300RPM -

More information

D51 D61 D71 D91 Series

D51 D61 D71 D91 Series MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications

More information

file:///users/revspencer/documents/fm Workon/Website-on-Local 2/marinepumps.html Marine Pumps - Continuous duty (Español)

file:///users/revspencer/documents/fm Workon/Website-on-Local 2/marinepumps.html Marine Pumps - Continuous duty (Español) 1 of 5 12/30/13 11:23 AM Marine Pumps - Continuous duty (Español) Excellence in Marine Engineering Since 1995! We pass along our OEM buying power to you, offering you the finest pumps available at "Factory

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM

More information

BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer

BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer BULLETIN 340B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS

More information

MICROPUMP MAG-DRIVE GEAR PUMPS

MICROPUMP MAG-DRIVE GEAR PUMPS MAG-DRIVE GEAR PUMPS REVISION # 1 DATE: 6-6-6 WETTED MATERIALS Pump housings: 316 stainless steel. Gears: PEEK. Gear shafts: 316 stainless steel. Gear shaft bearings: PEEK. Driven magnet: Totally encapsulated

More information

INDUSTRIAL PRODUCTS 2010 CATALOG

INDUSTRIAL PRODUCTS 2010 CATALOG has a new name SHURflo Industrial INDUSTRIAL PRODUCTS 2010 CATALOG Pumps: Centrifugal Gear Roller Flexible Impeller Effective: 1/1/2010 has a new name SHURflo Industrial The SHURflo product line is a world

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin T June 04 T E Series Regenerative Turbine Pumps Capacities to 40 GPM Heads to 700 Feet Temperatures to 00 F MTH PUMPS MTH T E Series Close-coupled and pedestal mounted regenerative turbine pumps

More information

TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES

TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing

More information

SERIES CS CLOSE COUPLED TURBINE PUMPS

SERIES CS CLOSE COUPLED TURBINE PUMPS PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.

More information

EN. 850 Filtrate Pumps. Technical Specification Pages

EN. 850 Filtrate Pumps. Technical Specification Pages 850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for

More information

SERIES CS CLOSE COUPLED TURBINE PUMPS

SERIES CS CLOSE COUPLED TURBINE PUMPS PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader

More information

Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service

Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,

More information

Series P Series P. Penguin Vertical Pump

Series P Series P. Penguin Vertical Pump Features: Choice of CPVC, PVDF, or Polypropylene Sealless Runs Dry Without Damage Self-Priming When Immersed No Metal Contact Chemical Resistant Extended Pump Lengths Available (See Bulletin 1) Recommended

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine

More information

3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)

3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C) 3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency

More information

D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs

D/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for

More information

FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8

FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8 FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:

More information

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance

More information

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates

More information

BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer

BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer BULLETIN 34B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS

More information

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates

More information

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) Series: G5-1¼, G6-1¼ 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3 LPS) HEADS TO 9 FEET (8 M) USA: (937) 778-8947 Canada: (905) 457-63

More information

REPAIR SEALS AND OPTIONS

REPAIR SEALS AND OPTIONS Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin E4 July E4/T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 6 Feet Temperatures to F MTH E4/T4 Series Close-coupled and pedestal mounted regenerative turbine pumps represent the

More information

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and

More information

SHURflo Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron

SHURflo Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a

More information

BULLETIN 350A. Sethco FLOWS TO 225 GPM. Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer

BULLETIN 350A. Sethco FLOWS TO 225 GPM. Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer BULLETIN 350A FLOWS TO 225 GPM Sethco Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO CORROSION RESISTANT SELF PRIMING MAGNETIC-DRIVE, SEAL-LESS

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader

More information

H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs

H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a

More information

D/G-12 Series. Up to 8 gpm (30.3 l/min)

D/G-12 Series. Up to 8 gpm (30.3 l/min) D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over years for various industrial, commercial and agricultural uses and has long been a leader

More information

Hydracel High Pressure Pump

Hydracel High Pressure Pump Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1

More information

EZ SERIES BOOSTER PUMPS

EZ SERIES BOOSTER PUMPS EZ SERIES BOOSTER PUMPS Cast Iron And Stainless Steel Booster Pumps Webtrol has been building Booster Pumps for over 4 years for various industrial, commercial and agricultural uses and has long been a

More information

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) Series: G5-1¼, G6-1¼ C A L L 1-866 -670-0533 O R D E R O N L IN E www.burkspumpcatalog.com 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 2900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3

More information

Bulletin C Dean Pump Division. Chemical Process Industrial Inline Pumps. DeanLine Series

Bulletin C Dean Pump Division. Chemical Process Industrial Inline Pumps. DeanLine Series Bulletin C 1.2.21 Dean Pump Division Chemical Process Industrial Inline Pumps DeanLine Series DeanLine Series Chemical Process Industrial Inline Pumps Capacities to 95 GPM (22m /hr) Heads to 1 Feet (9

More information

Series: CT. 4CT RPM - 60Hz. CT RPM - 60Hz. (See Indivdual curves for symbol number)

Series: CT. 4CT RPM - 60Hz. CT RPM - 60Hz. (See Indivdual curves for symbol number) 4CT - 25-60Hz. CT - 450-60Hz. (See Indivdual curves for symbol number) Symbol 2 4 5 6 8 9 0 *MAXIMUM HEAD HP /2 /4 / /2 /4 / /2 /4 /4 /2 /4 Catalog - Phase - Phase 5CTM CTM CT6M 5CT6M CT6M CT5M 5CT5M 24CTM

More information

GENERAL OVERVIEW BRONZE PEDESTAL ROTARY GEAR N13HDM C992 BRONZE BRONZE HELICAL ROTOR 101BG RUBBER

GENERAL OVERVIEW BRONZE PEDESTAL ROTARY GEAR N13HDM C992 BRONZE BRONZE HELICAL ROTOR 101BG RUBBER GENERAL OVERVIEW BRONZE CLOSE COUPLED N970 BRONZE PEDESTAL N4000R BRONZE PEDESTAL ROTARY GEAR N13HDM PLASTIC CENTRIFUGAL 144 RUBBER ROLLER 310F BRONZE CENTRIFUGAL 50P DUCTILE IRON CLOSE COUPLED C992 BRONZE

More information

H/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs

H/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for

More information

INDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT

INDUSTRIAL PUMPS MODEL: D-35 PARTS MANUAL WANNER ENGINEERING, INC. IMPORTANT PARTS MANUAL INDUSTRIAL PUMPS IMPORTANT Record your pump model number and serial number here for easy reference: MODEL: D-35 Model No. Serial No. Date of Purchase When ordering parts or making inquiries

More information

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel

More information

DPS. The SSV Dual Pump System

DPS. The SSV Dual Pump System DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve

More information

Models 9202C, 9203C, 9252C-C, and 9253C-C

Models 9202C, 9203C, 9252C-C, and 9253C-C Models 0C, 03C, C-C, and 3C-C 3 0 3 consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, decription, and complete model

More information

D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs

D/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete

More information

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps 855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to

More information

08 general Purpose Pumps

08 general Purpose Pumps 070 08 general Purpose Pumps InTRODuCTIOn Ballast Pumps Today s Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested

More information

High Capacity Centrifugal & Sprinkler Pumps

High Capacity Centrifugal & Sprinkler Pumps High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to

More information

SHURflo Close-Coupled Centrifugal Pumps

SHURflo Close-Coupled Centrifugal Pumps Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin M M Series Regenerative Turbine Pumps Capacities to 8 GPM Heads to Feet MTH M Series Vertical base mount and horizontal pedestal mounted multi-stage regenerative turbine pumps represent the most

More information

Model 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS

Model 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in

More information

MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.

MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442. Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions

More information

Gaskets. Fluid Handling Components. Bee Valve offers a full line of original and replacement gaskets to meet all your needs.

Gaskets. Fluid Handling Components. Bee Valve offers a full line of original and replacement gaskets to meet all your needs. 2009 Fluid Handling Components Gaskets Bee Valve offers a full line of original and replacement gaskets to meet all your needs. Bolted Tank Fitting Bulkhead Fitting Manifold System Cam Coupler Tank Lid

More information

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135

More information

Alloy version available please call for specifications.

Alloy version available please call for specifications. Alloy version available please call for specifications. 2 SEAL-LESS MAG-DRIVE PUMP SPECIALISTS From WARRENDER, Ltd. - The Leader in Magnetic Drive Pump Technology: 21st Century Design, Materials and Engineering.

More information

Self-Priming Fiberglass Pumps

Self-Priming Fiberglass Pumps Fybroc Division SERIES 16 Self-Priming Fiberglass Pumps B U L L E T I N 16B1 FYBROC THE LEADER IN CORROSION-RESISTANT FIBERGLASS PUMPING EQUIPMENT Fybroc is the leading manufacturer of fiberglass reinforced

More information

Close-Coupled Centrifugal Pumps 316 Stainless Steel, Bronze and Cast Iron Models

Close-Coupled Centrifugal Pumps 316 Stainless Steel, Bronze and Cast Iron Models 316 Stainless Steel, Bronze Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain

More information

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and

More information

MODEL 2002 PERISTALTIC PUMPS S E R I E S

MODEL 2002 PERISTALTIC PUMPS S E R I E S MODEL PERISTALTIC PUMPS Features Dry pump cavity Self-priming operation Runs dry without damage Complete isolation of pumped fluid Heavy-duty roller bearings Wide range of pump configurations/flows No

More information

Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)

Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number) 4ET - 725 RPM - 60Hz. ET - 450 RPM - 60Hz. (See Indivdual curves for symbol number) ET - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) 60 Hz Performance 60Hz - PERFORMANCE AND SELECTION CHART

More information

Series: GNA5-1-1/4, GNA6-1-1/4

Series: GNA5-1-1/4, GNA6-1-1/4 1750 RPM - 60Hz. CAPACITIES TO 40 GPM (2.5 LPS) HEADS TO 0 FEET (9 m) USA: (97) 778-8947 Canada: (905) 457-622 International: (97) 615-598 1 500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 15 FEET

More information

PENGUIN. Magnetic Drive Pump. Series M INTRODUCTION RECOMMENDATIONS ELECTRICAL PLUMBING. Installation & Maintenance

PENGUIN. Magnetic Drive Pump. Series M INTRODUCTION RECOMMENDATIONS ELECTRICAL PLUMBING. Installation & Maintenance PENGUIN Installation & Maintenance Magnetic Drive Pump Series M MODELS M-1/14 M-1/8 M-1/4 M-1/3 M-1/2 M-3/4 M-2 M-3 M-10 MATERIALS B - Polypropylene C - PVDF (Kynar) S - 316 Stainless Steel INTRODUCTION

More information

Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)

Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number) 4ET - 725 RPM - 60Hz. ET - 450 RPM - 60Hz. (See Indivdual curves for symbol number) ET - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) USA: (97) 77-947 Canada: (905) 457-622 International:

More information

3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS

3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS 3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800

More information

NDP-25 Specifications

NDP-25 Specifications NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air

More information

SPECIFICATION DATA. 200 SERIES MOTORIZED 203, 204, 205 and 220 MODELS

SPECIFICATION DATA. 200 SERIES MOTORIZED 203, 204, 205 and 220 MODELS Section: Page: 1 of 2 Date: March 30, 1996 SPECIFICATION DATA 200 SERIES MOTORIZED 203, 204, 205 and 220 MODELS PORT SIZES MODELS SUCTION DISCHARGE All dimensions are in inches. Specifications subject

More information

Bulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS

Bulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS ulletin D1 September 006 D1 D61 D71 D91 Series Centrifugal Pumps Capacities to 0 GPM Heads to 60 eet MTH PUMPS Casing Standard casing construction of all units is ASTM A8 Class 0 cast iron. All bronze

More information

High Temperature Chemical Process Inline Pumps

High Temperature Chemical Process Inline Pumps Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167

More information

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N

More information

PSW SHALLOW WELL 1 ¼" 1" All pumps are tested at our factory PERFORMANCE CHART B-1

PSW SHALLOW WELL 1 ¼ 1 All pumps are tested at our factory PERFORMANCE CHART B-1 SHALLOW WELL PSW The PSW injection centrifugal shallow well pump is ideal for a house, a summer cottage or a country house. The diffuser (Polycarbonate) and the impeller (Noryl) precisely molded, assure

More information

REPAIR PARTS LIST 31

REPAIR PARTS LIST 31 LIST 31 Part Number Size Description List Price 0109-09-1601 16" Cover - Mild Steel $85.92 0109-03-1601 16" Cover - Aluminum $136.26 0109-07-1601 16" Cover - Stainless Steel 304 $329.09 0109-09-2001 20"

More information

Product Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE

Product Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,

More information

M50 L50 Series Multistage Regenerative Turbine Pumps

M50 L50 Series Multistage Regenerative Turbine Pumps Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal

More information

XFL70 FLOW RATE (LPM) Flow Rate (GPM)

XFL70 FLOW RATE (LPM) Flow Rate (GPM) Pump Specifications XFL70 Series ¾ HP Submersible Effluent Pump For Hazardous Locations Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIB 50 XFL70 FLOW RATE (LPM) 0 50 100 150 200 250

More information

series2500 TEXSTEAM Pumps ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES MODEL DESIGNATION

series2500 TEXSTEAM Pumps ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES MODEL DESIGNATION TEXSTEAM Pumps series2500 ELECTRIC DRIVEN INJECTION PUMP PRODUCT FEATURES Maximum discharge pressure: 6,000 PSI (1 bar) w/ 3/16 plunger Maximum volume gallons per day (52 liters per day) w/ 1/2 plunger

More information

500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG

500 Series Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Fred C. Gilbert Co. 106 Norris Road Bakersfield, Ca. 93308 661-399-9569 fax 661-393-9654 Adjustable Popoff & Inline Relief Valves.5 to 150 PSIG Features Popoff or Inline Valves Adjustable Crack Pressure

More information

SPECI. . Up to 21 GPM. Flow. Steel. Bellows O ring/flapper. Mechanical Seal. Carbon/Ceramic/Viton. The. stainless NPT.

SPECI. . Up to 21 GPM. Flow. Steel. Bellows O ring/flapper. Mechanical Seal. Carbon/Ceramic/Viton. The. stainless NPT. * Pump The Primeme Pump is a high performance self priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applicaons where sucon li is required.

More information

XLE50 FLOW RATE (LPM) Flow Rate (GPM)

XLE50 FLOW RATE (LPM) Flow Rate (GPM) Pump Specifications XLE50 Series ½ HP Submersible Sewage Pump For Hazardous Locations Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIB 25 XLE50 FLOW RATE (LPM) 0 100 200 300 400 500

More information

20EVP-A SERIES. Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents. Marlow Pumps. Marlow Pumps.

20EVP-A SERIES. Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents. Marlow Pumps. Marlow Pumps. 2EVP-A SERIES Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents PUMP: Heavy-duty cast iron construction, with 2 NPT female threaded, in-line suction and discharge ports. This

More information

V6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012

V6 Vertical Pumps. Multi-Stage Pumps. Features: BOOK: MSP-010 DATE: Jan. 1, 2012 BOOK: MSP-1 DATE: Jan. 1, 212 The V6 Booster Pump is ideal for industrial/commercial applications where water pressure boosting is required. Designed with premium hydraulics for reliability and excellent

More information

Agriculture Pumps and Accessories

Agriculture Pumps and Accessories Agriculture Pumps and Accessories To access our 24 Hour Technical Data Assistance Via Fax, Call (8) 337-483 For DFAX #1 series and (8) 297-394 for DFAX #2 series Simply enter the Docufax number (under

More information

Models: G-25, H-25 With Non-Metallic Pump Head

Models: G-25, H-25 With Non-Metallic Pump Head Parts Manual G25-991-2403B Models: G-25, H-25 With Non-Metallic Pump Head WANNER ENGINEERING, INC. W0193B 1204 Chestnut Avenue, Minneapolis, MN 55403 TEL: (12) 332-581 FAX: (12) 332-937 TOLL-FREE FAX [US

More information

Series: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number)

Series: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number) C A L L -866-670 -0533 O R D E R O N L INE www.burkspumpcatalog.com Series: ES 4ES - 725 RPM - 60Hz. ES - 3450 RPM - 60Hz. (See Indivdual curves for symbol number) ES - 2900 RPM - 50Hz. (See Indivdual

More information

3340 Series Single Stage End Suction Pumps

3340 Series Single Stage End Suction Pumps 3340 Series Single Stage End Suction Pumps Bulletin 3340/Rev. A Model 3344 Aurora 3340 Pump Setting New Standards of Efficiency Liquid handling requirements are much more involved than they were five years

More information

Parts and Accessories

Parts and Accessories Parts and Accessories For a full list of available pressure washer parts and accessories, visit www.landa.com. 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Hypro

More information

REPAIR SEALS AND OPTIONS

REPAIR SEALS AND OPTIONS Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

Hydraulic and Pneumatic In-line and Cartridge Insert Control Valves for any fluid or gas.

Hydraulic and Pneumatic In-line and Cartridge Insert Control Valves for any fluid or gas. 2010 TECHNICAL CATALOG FROM CONCEPT TO PERFORMANCE... KEPNER VALVES DELIVER ZERO LEAKAGE CONTROL! Hydraulic and Pneumatic In-line and Cartridge Insert Control Valves for any fluid or gas. Kepner Products

More information

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560 Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;

More information