Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)

Size: px
Start display at page:

Download "Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)"

Transcription

1 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number) ET RPM - 50Hz. (See Indivdual curves for symbol number)

2 60 Hz Performance 60Hz - PERFORMANCE AND SELECTION CHART Capacity in at Total Head in Feet (m) or Pressure Shown Catalog Number PSI (kpa) Feet (m) 8.6 (59) (6) (89) 0 (9) 7.2 (8) 40 (2) 2.5 (48) 50 (5) 26 (79) 60 (8) 4.5 (27) 80 (24) 4. (298) (7) 25 (8) 64.9 (447) 50 (45) 75.8 (522) 75 (5) 86.6 (597) (67) 225 (68) 08. (746) (82) 275 (8) 0 (896) 00 (9) 40. (965) 25 (99) 5.8 (045) 50 (06) 750 RPM ET5M ET6M.9 (.) 2.4 (.5).7 () 2. (.4).6 () 2.2 (.).5 (.09) 2.0 (.2).4 (.08).9 (.). (.06).7 ().0 (.06).6 ().2.80 (.05)..4 (.08).7.60 (.0). /4 HP.2 (.07). (.02).5.0 (.06).2.0 (.0).7.80 (.05).28. (.0)..60 (.0).0 (.0).5 (.02).0 (.0).42 /4 HP / HP ET7M.4 (.2). (.). (.9) 2.9 (.8) 2.8 (.7). 2.5 (.5).5 2. (.4).8 2. (.)..8 (.).2.6 ().28.4 (.08).0.2 (.07)..0 (.06).6.85 (.05).70 (.04).47 /4 HP / HP /2 HP 60Hz - PERFORMANCE AND SELECTION CHART Capacity in at Total Head in Feet (m) or Pressure Shown Catalog Number PSI (kpa) Feet (m) 8.6 (59) (6) (89) 0 (9) 7.2 (8) 40 (2) 2.5 (48) 50 (5) 26 (79) 60 (8) 4.5 (27) 80 (24) 4. (298) (7) 25 (8) 64.9 (447) 50 (45) 75.8 (522) 75 (5) 86.6 (597) (67) 225 (68) 08. (746) (82) 275 (8) 0 (896) 00 (9) 40. (965) 25 (99) 5.8 (045) 50 (06) 450 RPM ET5M ET6M 4.2 (.26). 6.0 (.7) (.25) (.7) (.25) (.5) (.24) (.4) (.).0.6 (.22).0.4 (.2)..2 (.).7.0 (.8) (.8) (.7) (.7) 2.6 (.6) (.6) (.5) (.5).70 / HP /2 HP /4 HP 5. (.2) (.0) (.29) (.27) (.27) (.26) (.25).60.9 (.24) / HP /2 HP /4 HP (.5).78.6 (.22).88 ET7M 8. (.52) () (.49) (.47) 7.4 (.46).4 7. (.44) (.42) (.4) (.9) (.7) (.6) (.4) (.4) (.) (.2).04 / HP /2 HP /4 HP HP 5. (.2). 5.0 (.).2 ET8M.7 (.7).45. (.7).0 (.69) (.68) (.66) (.6) (.6) (.58) (.56) (.5). /2 HP /4 HP HP NOTE: When pumping hot water over 80ºF (82.2ºC), check the NPSH available in the pumping system against the required pump NPSH shown on pump performance curves. Available NPSH must be greater than required NPSH. 2

3 50 Hz. Performance 50Hz - PERFORMANCE AND SELECTION CHART Capacity in at Total Head in Feet (m) or Pressure Shown Catalog Number PSI (kpa) Feet (m) 8.6 (59) (6) (89) 0 (9) 7.2 (8) 40 (2) 2.5 (48) 50 (5) 26 (79) 60 (8) 4.5 (27) 80 (24) 4. (298) (7) 25 (8) 64.9 (447) 50 (45) 75.8 (522) 75 (5) 86.6 (597) (67) 225 (68) 08. (746) (82) 275 (8) 0 (896) 00 (9) 40. (965) 25 (99) 5.8 (045) 50 (06) ET5M ET6M. (.9) 4.8 (.0).0 (.8) (.29) 2.9 (.8) (.7) (.7) 2.6 (.6) (.5) (.4) (.) (.) (.2).7.9 (.).78.8 (.).86 /2 HP /4 HP HP 4. (.27) 4. (.25) (.22).66.4 (.2).7.2 (.).80. (.9).8.0 (.8) (.8) (.7).96 /2 HP /4 HP HP.7 () (.7) RPM ET7M 6.6 (.4) () (.9) (.7) (.6) (.4) (.2) (.0) (.29) (.28) (.27).0 4. (.25).9 (.24).26 /4 HP HP ½ HP (.22) NOTE: When pumping hot water over 80ºF (82.2ºC), check the NPSH available in the pumping system against the required pump NPSH shown on pump performance curves. Available NPSH must be greater than required NPSH.

4 Features MAXIMUM OPERATING CONDITIONS TEMPERATURE (For Standard Buna-N Seal) INLET PRESSURE CASING WORKING PRESSURE 225ºF (07ºC) 00 PSI (689kPa) 250 PSI (72kPa) BURKS Series ET turbine pumps are available for capacities up to 8 g.p.m. (0 l.p.s.) - pressures up to 50 p.s.i. (04 kpa) and temperatures up to 225 F. (07 C), with standard mechanical shaft seal. Special shaft seals are available for higher temperatures and fl uids other than water. These compact turbine pumps are designed for pumping clear water and many other non-abrasive, lower viscosity liquids. They are especially engineered for boiler feed on steam process applications and will serve up to a 8 hp. boiler at a to safety factor. Available in bronze fi tted as standard. All bronze or stainless steel construction also available. These pumps are recommended for many application requiring higher pressures and lower capacities. Coupling guard furnished on all complete Base-Mounted units manufactured by Burks Pumps. Not furnished with purchase of pump only, but required. FOR TEMPERATURES TO 500 F (260 C) Series ET Pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fl uids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffi x J to pump catalog number for temperatures below 400 F (4 C) and add suffi x JK to pump catalog number for temperatures over 400 F (4 C). Example: ET6MJ. See Section on High Temperature Pumps for more information. PART MATERIALS OF CONSTRUCTION BRONZE FITTED ALL BRONZE STAINLESS STEEL Frame Cast Iron Bronze #0 Stainless Impeller Bronze (Monel Blades) Bronze (Monel Blades) #0 Stainless Raceway Bronze Bronze #0 Stainless Shaft #0 Stainless #0 Stainless #0 Stainless Shaft Seal Carbon-Ceramic SS - Buna-N Carbon-Ceramic SS - Buna-N Carbon-Ceramic SS - Buna-N BURKS is the only turbine pump with Life-Lok external Impeller adjustment feature that allows readjustment of impeller without disturbing piping, disassembling pump or replacing parts. Gives up to 40% longer service life than turbine pumps of other designs. 4 2/

5 Dimensions DIMENSIONS IN INCHES (mm) A B CP CP 5 (27) 5½ (9) 4¼ (6) 4½ (68) D DD E F G H K K2 L L ½ (88) 2¼ (57) 2 (50) ⅜ (85) ½ () ½ () ⅝ (4) ¹¹ 6 (42) 7⅜ (87) 7⅝ (9) O P S U V X Y Y 5⅞ (49) ¹ 6 (27) ³ 6 ⅝ (5) 2¼ (57) 2⅜ 5 6 () Z ³ 6 (4.7) Frame 56 4T 45T AB C CP CP --- 2½ (7) (227) (27) ¼ (6) 4¼ (6) 4¼ (6) 4½ (68) 4½ (68) 4½ (68) HA HB HC HC 8 () 8 () 8 () 22 (558) 22 (558) 22 (558) 27¼ (692) (646) (67) 27½ (698) 25 6 (652) 26 6 (677) DIMENSIONS IN INCHES (mm) HD HE HF HG HH HL HL 6 (52) 6 (52) 6 (52) (508) (508) (508) 2½ (6) 2½ (6) 2½ (6) 6 (7) 6 (7) 6 (7) (85) (85) (85) (92) (92) (92) HM HO HP HT S X Y Y 9 6 (2) 9½ (24) 9½ (24) 8⅜ (22) 8⅜ (22) 8⅜ (22) ½ (2) ½ (2) ½ (2) ⅜ 2⅜ 2⅜ 5 6 () 5 6 () 5 6 () Z 6 (4.7) 6 (4.7) 6 (4.7) A strainer, approximately mesh, should be installed on the suction side of the pump to prevent chips, scale or hard foreign particales from entering the pump and damaging the raceway and impeller. 5

6 60 Hz Performance 6

7 60 Performance 7

8 60 Hz Performance 8

9 60 Hz. Performance 9

10 50 Hz. Performance 0

11 50 Hz. Performance

Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number)

Series: ET. 4ET RPM - 60Hz. ET RPM - 60Hz. (See Indivdual curves for symbol number) 4ET - 725 RPM - 60Hz. ET - 450 RPM - 60Hz. (See Indivdual curves for symbol number) ET - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) USA: (97) 77-947 Canada: (905) 457-622 International:

More information

Series: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number)

Series: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number) C A L L -866-670 -0533 O R D E R O N L INE www.burkspumpcatalog.com Series: ES 4ES - 725 RPM - 60Hz. ES - 3450 RPM - 60Hz. (See Indivdual curves for symbol number) ES - 2900 RPM - 50Hz. (See Indivdual

More information

Series: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number)

Series: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number) 4ES - 725 RPM - 60Hz. ES - 3450 RPM - 60Hz. (See Indivdual curves for symbol number) ES - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for fi

More information

Series: CT. 4CT RPM - 60Hz. CT RPM - 60Hz. (See Indivdual curves for symbol number)

Series: CT. 4CT RPM - 60Hz. CT RPM - 60Hz. (See Indivdual curves for symbol number) 4CT - 25-60Hz. CT - 450-60Hz. (See Indivdual curves for symbol number) Symbol 2 4 5 6 8 9 0 *MAXIMUM HEAD HP /2 /4 / /2 /4 / /2 /4 /4 /2 /4 Catalog - Phase - Phase 5CTM CTM CT6M 5CT6M CT6M CT5M 5CT5M 24CTM

More information

Series: EC & ED. EC & ED RPM - 60Hz. (See Indivdual curves for symbol number)

Series: EC & ED. EC & ED RPM - 60Hz. (See Indivdual curves for symbol number) Series: EC & ED EC & ED - 1725 RPM - 60Hz. (See Indivdual curves for symbol number) EC & ED - 1450 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for

More information

Series: EC & ED. EC & ED RPM - 60Hz. (See Indivdual curves for symbol number)

Series: EC & ED. EC & ED RPM - 60Hz. (See Indivdual curves for symbol number) Series: EC & ED EC & ED - 1725 RPM - 60Hz. (See Indivdual curves for symbol number) EC & ED - 1450 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for

More information

Series: GNA5-1-1/4, GNA6-1-1/4

Series: GNA5-1-1/4, GNA6-1-1/4 1750 RPM - 60Hz. CAPACITIES TO 40 GPM (2.5 LPS) HEADS TO 0 FEET (9 m) USA: (97) 778-8947 Canada: (905) 457-622 International: (97) 615-598 1 500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 15 FEET

More information

SERIES CS CLOSE COUPLED TURBINE PUMPS

SERIES CS CLOSE COUPLED TURBINE PUMPS PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.

More information

SERIES CS CLOSE COUPLED TURBINE PUMPS

SERIES CS CLOSE COUPLED TURBINE PUMPS PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD

More information

Series: CS. 4CS RPM - 60Hz. CS RPM - 60Hz. CS RPM - 50Hz. Close Coupled Regenerative Turbine.

Series: CS. 4CS RPM - 60Hz. CS RPM - 60Hz. CS RPM - 50Hz. Close Coupled Regenerative Turbine. 4S - RPM - 60Hz. S - 40 RPM - 60Hz. (See Indivdual curves for symbol number) Symbol Number 4 6 8 0 4 6 8 *MXIMUM HD atalog Number - Phase - Phase / / / / / / ½ ½ ½ 4SM 4S6M 4S6M 4SM 4SM 4S8M 0SM SM 0S6M

More information

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) Series: G5-1¼, G6-1¼ 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3 LPS) HEADS TO 9 FEET (8 M) USA: (937) 778-8947 Canada: (905) 457-63

More information

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) Series: G5-1¼, G6-1¼ C A L L 1-866 -670-0533 O R D E R O N L IN E www.burkspumpcatalog.com 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 2900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3

More information

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance

More information

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G5--/4 G6--/4 SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 500RPM

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM

More information

ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.

ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water. ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L

More information

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates

More information

SERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS 420 Third Street Piqua, Ohio 436-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WG6-2 SECTION 4A PAGE ISSUED 2/03 REPLACES 2/0 SELF-PRIMING CENTRIFUGAL PUMPS 300RPM -

More information

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and

More information

Basic Hydraulic Features. Basic Mechanical Features

Basic Hydraulic Features. Basic Mechanical Features APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered

More information

Series

Series MTH PUMPS 15 25 26 17 27 Series Flexible Coupled Capacities to 15 GPM Heads to 115 Feet Low NPSH Requirements Page 1-19 15 17 25 26 27 LIMITATIONS Discharge Pressure Seal Pressure* Suction Pressure (Min.)

More information

3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS

3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS 3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800

More information

Model 3550 ASME/ANSI B73.1M Industrial Process Pumps

Model 3550 ASME/ANSI B73.1M Industrial Process Pumps 3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine

More information

EN. 850 Filtrate Pumps. Technical Specification Pages

EN. 850 Filtrate Pumps. Technical Specification Pages 850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for

More information

Index - Section 14 End Suction Pump Semi-Open Impeller

Index - Section 14 End Suction Pump Semi-Open Impeller Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump

More information

Bulletin BX-420C Bell & Gossett. VSC /VSCS Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Program

Bulletin BX-420C Bell & Gossett. VSC /VSCS Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Program Bulletin BX-4C Bell & Gossett VSC /VSCS Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Program VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION

More information

MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.

MOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442. Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions

More information

VSC /VSCS Pumps Technical Brochure

VSC /VSCS Pumps Technical Brochure VSC /VSCS Pumps Technical Brochure BX-4C VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION ASTM NO. Casing Cast iron A159 Class G0 Volute cover plate (Outboard)

More information

AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS

AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin E4 July E4/T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 6 Feet Temperatures to F MTH E4/T4 Series Close-coupled and pedestal mounted regenerative turbine pumps represent the

More information

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y

N N O V A T I O N E F F I C I E N C Y Q U A L I T Y N N O V A T I O N E F F I C I E N C Y Q U A L I T Y PS For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology Ruhrpumpen is an innovative

More information

ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.

ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps. ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin T June 04 T E Series Regenerative Turbine Pumps Capacities to 40 GPM Heads to 700 Feet Temperatures to 00 F MTH PUMPS MTH T E Series Close-coupled and pedestal mounted regenerative turbine pumps

More information

Bulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS

Bulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS ulletin D1 September 006 D1 D61 D71 D91 Series Centrifugal Pumps Capacities to 0 GPM Heads to 60 eet MTH PUMPS Casing Standard casing construction of all units is ASTM A8 Class 0 cast iron. All bronze

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin 40 October 008 40 40 80 80 Series Regenerative Turbine Pumps Capacities to 60 GPM Heads to 800 Feet MTH PUMPS 40 40 80 80 Series regenerative turbine pumps represent the most economical, high

More information

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and

More information

D51 D61 D71 D91 Series

D51 D61 D71 D91 Series MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications

More information

barmesapumps.com WHAT IS AN ANSI PUMP

barmesapumps.com WHAT IS AN ANSI PUMP WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,

More information

HORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type BT

HORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type BT Peerless Pump Company Indianapolis, IN 46207-7026 HORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type BT SECTION 2030 Page 1 August 15, 1998 Pump Size & Type Suction Flange Size x 125 ANSI Lb. Discharge

More information

Six-Inch Submersible Pumps

Six-Inch Submersible Pumps FW1 87 5 thru 5 5 to GPM Supersedes Six-Inch Submersible Pumps Series 6P and 6T High capacity six-inch submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water

More information

AURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS

AURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads

More information

UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE

UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4

More information

GH General Horizontal, Close Coupled and Frame Mounted Pumps

GH General Horizontal, Close Coupled and Frame Mounted Pumps GH General Horizontal, Close Coupled and Frame Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The GH Series is Carver s horizontal, end suction pump for handling

More information

Model 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS

Model 133 Models 134 & 135 AURORA 130 SERIES SINGLE STAGE TURBINE TYPE PUMPS Model Models 4 & AURORA 0 SERIES SINGLE STAGE TURBINE TYPE PUMPS WWW.AURORAPUMP.COM AURORA 0 SERIES Single Stage Turbine Type Pumps Capacities to 0 G.P.M. Heads to 700 Ft. Temperatures to F A Pioneer in

More information

High Temperature Air-Cooled Hot Oil Pumps

High Temperature Air-Cooled Hot Oil Pumps Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required

More information

Product Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE

Product Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,

More information

VISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst

VISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst UNIVERSL PRODUCT LINE: SERIES 724, 4724 Section 1706 Page 1706.1 Issue B TBLE OF CONTENTS Features & Benefits...2 Cutaway View & Pump Features...2 Model Number Key...3 Standard Materials of Construction...3

More information

ANSI Centrifugal Process Pumps. 911 Series

ANSI Centrifugal Process Pumps. 911 Series ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition

More information

G&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS

G&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS TECHNICAL Brochure BAC8 Series A-C 8 SPLIT CASE PUMPS TABLE OF CONTENTS Useful Pump Formulas 2 Performance Curves 3-5 Materials of Construction (Standard) 6 Materials of Construction (Optional) 7 Pump

More information

Series 50Hz Metric Edition

Series 50Hz Metric Edition MTH PUMPS 1 1 17 7 Series Hz Metric Edition Capacities to 7 LPM Heads to 3 Meters Low NPSH Requirements Flex Coupled MTH 1 1 17 7 Series regenerative turbine pumps represent the most economical, high performance

More information

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel

More information

UNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE

UNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4

More information

UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE

UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View

More information

High Capacity Centrifugal & Sprinkler Pumps

High Capacity Centrifugal & Sprinkler Pumps High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to

More information

L Q LIQUID-SPECIFIC PRODUCT LINE: CAST IRON ASPHALT PUMPS SERIES DESCRIPTION (34 & 32E) OPERATING RANGE: MODEL NUMBER KEY:

L Q LIQUID-SPECIFIC PRODUCT LINE: CAST IRON ASPHALT PUMPS SERIES DESCRIPTION (34 & 32E) OPERATING RANGE: MODEL NUMBER KEY: LIQUID-SPECIFIC PRODUCT LINE: SERIES 4A, 4AE, 44A, 44AE, 34A, 434A, 14E, 34E, 34, 3E Section 430 Page 430.1 Issue S SERIES DESCRIPTION (34 & 3E) Viking 34 Series Asphalt Pumps are designed to handle asphalts,

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin M M Series Regenerative Turbine Pumps Capacities to 8 GPM Heads to Feet MTH M Series Vertical base mount and horizontal pedestal mounted multi-stage regenerative turbine pumps represent the most

More information

High Temperature Chemical Process Inline Pumps

High Temperature Chemical Process Inline Pumps Bulletin C-1.2.21. Dean Pump Division High Temperature Chemical Process Inline Pumps Series DL Series DL High Temperature Chemical Process Inline Pumps Capacities to 6 GPM (182 m 3 /hr) Heads to feet (167

More information

D Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006

D Series. Centrifugal Pumps. Pump End Kits. Features: PAGE: CP-435 DATE: June 5, 2006 D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation

More information

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135

More information

3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)

3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C) 3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency

More information

M50 L50 Series Multistage Regenerative Turbine Pumps

M50 L50 Series Multistage Regenerative Turbine Pumps Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal

More information

100H, 150H, 225H, 275H

100H, 150H, 225H, 275H TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the

More information

Wafer Silent Check Valves

Wafer Silent Check Valves Applications Liquid Service Metals & Mining Process Industry Water & Waste Water Power Industry Pulp & Paper Chemical Industry Oil & Gas Wafer Silent Check Valves Pressures to 740 PSIG Temperatures to

More information

High Temperature Air-Cooled Hot Oil Pumps

High Temperature Air-Cooled Hot Oil Pumps Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series

More information

M50 L50 Series - 50Hz Metric Edition Multistage Regenerative Turbine Pumps

M50 L50 Series - 50Hz Metric Edition Multistage Regenerative Turbine Pumps Page M-M MTH PUMPS M L Series - Hz Metric Edition Multistage Regenerative Turbine Pumps Capacities to LPM Heads to 6 Meters Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal

More information

VIKING GENERAL PURPOSE PUMPS SERIES 32 AND 432

VIKING GENERAL PURPOSE PUMPS SERIES 32 AND 432 Page 310.1 FEATURES SERIES 32 and 432 3 GPM (.7 m³/hr) Size Shown. or Mechanical seal type. Valve on casing. SERIES 432 5 GPM (1 m³/hr) Mechanical seal type. Shown with valve on head. C, F & FH Sizes J

More information

5GB, 7GB, 10GB, 18GB, 25GB, 33GB

5GB, 7GB, 10GB, 18GB, 25GB, 33GB B-33GB GB, 7GB, GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction: Standard

More information

ITT. Goulds Pumps. 5GB, 7GB, 10GB, 18GB, 25GB, 33GB High Pressure Multi-Stage Booster Pump. Engineered for life. Residential Water Systems FEATURES

ITT. Goulds Pumps. 5GB, 7GB, 10GB, 18GB, 25GB, 33GB High Pressure Multi-Stage Booster Pump. Engineered for life. Residential Water Systems FEATURES Goulds Pumps GB, 7GB, 1GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:

More information

Index - Section 40L. Large Sump or Drainage Pumps. Bulletin Bulletin 4500

Index - Section 40L. Large Sump or Drainage Pumps. Bulletin Bulletin 4500 www.cranepumps.com Index - Section 40L ITEM S Typical Architect / Engineer Specifi cations - 4500 Series... 1 Guide Bearing and Shaft Selection 4500 Series... 2 Shaft and Guide Bearing Assemblies 4500

More information

Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service

Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,

More information

Series 1510 Centrifugal Pumps

Series 1510 Centrifugal Pumps Series 1 Centrifugal Pumps B-207H Table of Contents Useful Pump Formulas... 2 Standard Features... 3 Technical Data... Materials of Construction... Selection Charts... 6 Performance Curves... 7 Centrifugal

More information

TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES

TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing

More information

VIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS

VIKING HG SERIES HELICAL GEAR EXTERNAL GEAR PUMPS Page 350.1 Series Description Viking s HG series positive displacement pumps are designed to provide low noise transfer and processing of clean, lubricating liquids for applications such as lube oils,

More information

Submersible Turbine Pumps

Submersible Turbine Pumps Submersible Turbine Pumps FW54 62 Supersedes NEW 5 to GPM For 5, 6, 7 and 8 inch wells High capacity submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water

More information

ITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6" Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems

ITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6 Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems B65-32L ITT Residential Water Systems Goulds s 65L, 95L, 12L, 16L, 2L, 32L 6" Stainless Steel Submersible s 6 Hz High Capacity For 6" and larger wells Goulds s is a brand of ITT Corporation. www.goulds.com

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin 0 0 2 0 2 170 270 Series Regenerative Turbine Pumps Capacities to 0 GPM Heads to Feet MTH PUMPS 0 2 0 2 170 270 Series Regenerative Turbine Pump MTH 0 2 0 2 170 270 Series regenerative turbine

More information

Bulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs

Bulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................

More information

DPS. The SSV Dual Pump System

DPS. The SSV Dual Pump System DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve

More information

PWA ANSI / ASME B73.1 PROCESS PUMP

PWA ANSI / ASME B73.1 PROCESS PUMP PWA ANSI / ASME B73.1 PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no

More information

PWM. API 610 BB3 Multistage Pump

PWM. API 610 BB3 Multistage Pump PWM API 610 BB3 Multistage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 60 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain pump

More information

Bulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter

Bulletin C Dean Pump Division. ANSI/ASME B73.1 Horizontal Process. ph2140 Telescoping Guard. ph2140 C-Face Adapter Bulletin C 1.2.34.5 Dean Pump Division ANSI/ASME B73.1 Horizontal Process ph2140 Telescoping Guard ph2140 C-Face Adapter Dean Pump Series ph Centrifugal Process Pumps Capacities to 3200 GPM (726 m 3 /hr)

More information

Series HSC-S Pumps Technical Brochure

Series HSC-S Pumps Technical Brochure Series HSCS Pumps Technical Brochure BX512L Table of Contents Useful Pump Formulas 2 60 Cycle Performance Curves Series HSCS 3 50 Cycle Performance Curves Series HSCS 4 Series HSCS Materials of Construction

More information

Series. NV Vertical Multistage Booster Pump

Series. NV Vertical Multistage Booster Pump NV Vertical Multistage Booster Pump Series This series of vertical multistage booster pumps offer technically advanced designs to meet market demands including hot water applications. Every NV Series pump

More information

DATA SHEET 6K151CT2, 6K151CT4, 6K201CT2, 6K201CT4, 6K301CT4, 6K401CT4 OPEN IMPELLER CENTRIFUGAL PUMPS. Stainless Steel Models: SPECIFICATIONS FEATURES

DATA SHEET 6K151CT2, 6K151CT4, 6K201CT2, 6K201CT4, 6K301CT4, 6K401CT4 OPEN IMPELLER CENTRIFUGAL PUMPS. Stainless Steel Models: SPECIFICATIONS FEATURES DATA SHEET OPEN IMPELLER CENTRIFUGAL PUMPS Stainless Steel Models: 6K151CT2, 6K151CT4, 6K1CT2, 6K1CT4, 6K31CT4, 6K1CT4 FEATURES Model 6K1CT2 Shown 34 SS Liquid-end construction offers corrosion resistance

More information

FLOWSERVE CORPORATION GA / GR / Gearex Pumps. Rotary Gear Pumps Product Training Program

FLOWSERVE CORPORATION GA / GR / Gearex Pumps. Rotary Gear Pumps Product Training Program FLOWSERVE CORPORATION GA / GR / Gearex Pumps Rotary Gear Pumps Product Training Program April 2017 The Major Pump Groups 1,000,000 Viscosity Limit (SSU) 100,000 10,000 1,000 100 10 Rotary Recip'g Centrifugal

More information

DESMI 48 Fast Track. Pump Replacement Within 48 hours PROVEN TECHNOLOGY

DESMI 48 Fast Track. Pump Replacement Within 48 hours PROVEN TECHNOLOGY DESMI 48 Fast Track Pump Replacement Within 48 hours PROVEN TECHNOLOGY DESMI 48 - Fast Track Pumps.indd 1 11/6/2017 4:13:19 PM DESMI 48 Fast Track Service Do you need to replace any of your main pumps?

More information

TECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP

TECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing

More information

UNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE

UNIVERSAL PRODUCT LINE: STAINLESS STEEL JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE UNIVERSAL PRODUCT LINE: SERIES 227A, 4227A, 327A, 4327A Section 1702 Page 1702.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable

More information

ITT. Goulds Pumps 70L, 90L, 150L, 200L, 300L Stainless Steel 6" Submersible Pumps. Engineered for life. Residential Water Systems. 60 Hz High Capacity

ITT. Goulds Pumps 70L, 90L, 150L, 200L, 300L Stainless Steel 6 Submersible Pumps. Engineered for life. Residential Water Systems. 60 Hz High Capacity Goulds Pumps 7L, 9L, 15L, 2L, 3L Stainless Steel 6" Submersible Pumps 6 Hz High Capacity For 6" and larger wells Goulds Pumps is a brand of ITT Residential and Commercial Water. www.goulds.com Engineered

More information

Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution

Submersible. Pumps Motors. 60Hz 10 Submersible Pump. Pumping Solution Submersible Pumps Motors Hz Submersible Pump Pumping Solution Product data Submersible bore well pumps Construction Submersible motor & pumps for deep wells of (DN mm). Sized for connection to the motor

More information

Wilfley. Model. Technical Handbook. ASME B73.1 Chemical Processing Pump

Wilfley. Model. Technical Handbook. ASME B73.1 Chemical Processing Pump Wilfley Technical Handbook ASME B73.1 Chemical Processing Pump Model A7 Wilfley Model A7 Chemical Processing Pumps Wilfley hydraulic seal in actual operation. ASME B73.1 M-91 Wilfley s Model A7 pump series

More information

VIKING JACKETED ASPHALT PUMPS

VIKING JACKETED ASPHALT PUMPS VIKING ED ASPHALT PUMPS SERIES 34 AND 434 Section 430 Page 430.1 Issue G FEATURES 1 Pressure 1 Temperature 1 Viscosity 1 Flow To 100 PSI (6.9 Bar) -60 F. to +450 F. (-51 C. to +232 C.) 31 SSU to 250,000

More information

Model: PO6LB 3" Spherical Solids Handling Universal Drive

Model: PO6LB 3 Spherical Solids Handling Universal Drive Model: PO6LB 3" Spherical Solids Handling Universal Drive Self-Priming, Solids Handling Pumps Specifications: Model: PO6LB-12F PO6LB-11J PO6LB-N SUCTION/DISCHARGE...6 (12mm) x 6" (12mm) 1 lb. Flange LIQUID

More information

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

SUBMERSIBLE TURBINE PUMPS

SUBMERSIBLE TURBINE PUMPS FEATURES Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life Spiral cutlass rubber intermediate bearings designed for abrasive

More information

ASME END SUCTION PUMPS Catalogue K-90

ASME END SUCTION PUMPS Catalogue K-90 ASME END SUCTION PUMPS Catalogue K-90 ASME B3.1-01 ISO 9001:008 REGISTERED COMPANY Engineered Pumps for Industrial and Municipal Services ASME B3.1 / ANSI END SUCTION PUMPS This catalogue provides the

More information

VIKING HEAVY DUTY ALLOY PUMPS SERIES 724 AND 4724

VIKING HEAVY DUTY ALLOY PUMPS SERIES 724 AND 4724 VIKING HEAVY DUTY ALLOY PUMPS Section 210 Page 210.1 FEATURES SERIES 4724 Cutaway View Mechanical, 1½, 3 and 5 GPM Sizes 1 Range 200 PSI (14 BAR) for (21 cst) and above (Small Pumps F, FH and G sizes)

More information