CA T ALOG MARCH C H E M I C A L O E M I N D U S T R I PUMPS A L H Y D R O N I C S O L A R

Size: px
Start display at page:

Download "CA T ALOG MARCH C H E M I C A L O E M I N D U S T R I PUMPS A L H Y D R O N I C S O L A R"

Transcription

1 C A T A L O G MARCH PUMPS C H E M I C A L O E M I N D U S T R I A L H Y D R O N I C S O L A R

2 P A G E 2 MARCH SEAL- LESS MAGNETIC DRIVE PUMPS The ultiate in reliable perforance for cheical, OEM, indtrial, hydronic and solar applications. teperature liquids. Vario designs range fro aircooled to fully subersible electric-powered unit otors to air otor-driven odels for certain environents. Whether it s a special pup design for an OEM application, or for a unique indtrial process, March is your source for reliable, efficient solutions to difficult puping probles. For worldwide availability and unparalleled service, contact March. No shaft, no seals, no seal probles. Introduced in 1963, March s patented agnetically coupled drive designs eliinate shaft seals and the any probles they can cae. Torque is transitted by a agnetic field fro the agnet attached to the otor, through the solid body, to the agnet attached to the ipeller. Benefits of agnetically coupled pups include: Leak-proof No aintenance associated with seal wear. March specializes in a wide range of precise, highly reliable agnetic drive centrifugal pups. March pups are designed for virtually any application, fro aquarius and iceakers, to cheical and processing equipent, to one-of-a-kind special applications such as the United States space shuttle progra. These include pups for handling a virtually unliited array of fluids fro water to highly corrosive or acidic solutions, as well as high Efficient Friction-free operation reduces power consuption. Full otor horsepower is transferred to puping power with no power loss. Built-in overload protection The agnetic coupling acts as a clutch to provide overload protection and prevent otor burnouts under heavy loads fro high specific gravity liquids. See Pup Directory on page 35 Need cto specs? March will build it!

3 P A G E 3 Easily aintained Many odels are designed so that the otor can be reoved fro the pup hoing, inspected and replaced without draining the syste. No special tools or training are required. Reliable Magnetic drive pups offer trouble-free perforance over any years of service life. High-perforance designs. All pup parts are designed to eet or exceed potential job deands. In pups intended for e with highly corrosive fluids, all coponents to be exposed to the liquid (often referred to as wetted aterials ) are either encapsulated or olded of appropriately resistant plastics. Metals are ed where plastics are incopatible with the solution to be handled. Proven aterials such as polypropylene, Ryton, polyvinylidene fluoride resin (PVDF or Kynar ), stainless steel and Hastelloy cover a broad range of applications. UL-recognized coponents are ed throughout, and any odels are UL-listed. March also specializes in cto designs for unique applications. Contact a March engineer for a pup with the perforance and aterials required for your special project. Chances are there s a March pup that s right for you if not, we ll build it! Internal coponent sourcing for enhanced quality control. The breadth and depth of March s product scope is unatched. In addition to pups, our anufactured products include soe fractional horsepower otors and all injection-olded plastic coponents. This unrivaled level of in-hoe coponent anufacturing capability not only results in designs with the ideal cobination of serviceable features and optiized perforance, it also fors an effective, start-to-finish quality control ubrella for the entire finished product with no coproise in quality, reliability and durability. Wide selection of otors for different applications. Most March pups utilize fan-cooled otors for long life under continuo operating conditions. Blast-cooled, totally enclosed, subersible, drip-proof and ball bearing otors are also available with vario odels, depending on the intended e. Many odels are available with air otors, particularly recoended for e in explosive environents. All otors are UL listed. Call (847) Fax (847)

4 P A G E 4 Material Selection Guidelines Cheical Copatibility Care t be exercised in selecting the proper aterials for pup coponents that will be exposed to the fluid being handled. Nitric, chroic, hydrochloric and sulfuric acids as well as benzene, alcohol, freon, kerosene and other solvents are soe of the ore coon highly corrosive cheicals that March pups are designed to withstand. In all cases, consult a March engineer regarding aterials for vario cheicals and solution concentrations. Specifications Fast, easy access to products and service. A full stock of pups, parts and technical support is available worldwide fro ore than 150 stocking sales and service locations. The March line includes ore than 200 standard pups with capacities fro 3 gp on 60 (9 LPM on 50 ) to 210 gp on 60 (680 LPM on 50 ). The flow, head and electrical data listed in LPM, eters, s etc. are based on 50 operation. All other data is based on 60 operation. All perforance specifications and test data shown in this catalog are based on puping water and are intended as guidelines only. Specifications will vary depending on specific fluid, teperatures and other operating conditions. Warranty March pups are guaranteed against defects in aterials or workanship for one year fro the date of anufacture. Warranty will be extended for up to one year fro the date of purchase, provided that the warranty card is returned to the factory within 10 days of the purchase date. In all events, liability is liited to the purchase price and to the replaceent or repair of any pup or parts defective in

5 P A G E 5 aterials or workanship. All pups for which a warranty clai is ade t be returned to the factory with shipping costs prepaid. This warranty is void if the pup has been subjected to ise or negligence. This warranty applies only to pups ed to pup water. For applications with all other solutions, contact the factory for verification of warranty ters before the pup is installed. Model Noenclature Becae coponents and aterials of construction vary widely and are unique to each odel, odel noenclature is not standardized. The following are soe typical abbreviations ed in odel nubers: In soe cases, letter portions of the noenclature are a designation of the aterial that will coe in contact with the solution that is to be puped, such as bhings and O rings. For exaple, a K indicates Kynar PVDF and S signifies a etallic pup head and ipeller agnet assebly ade of 316 stainless steel. A C in the odel nuber indicates that the pup wet end is ade of glass filled polypropylene, and the ipeller assebly and bhing aterial are ade of polypropylene. Both the spindle and the front thrt washer are of high grade ceraic. The standard O ring for this odel is ade of Viton. For coplete flow curves and diensional assebly drawings, visit our Web Site -. AC AM BC BB DP SUB TEFC TE/SUB MOTOR-TYPE ABBREVIATIONS air cooled air otor blast cooled ball bearing drip proof subersible (blue epoxy color) totally enclosed/fan cooled totally enclosed/subersible (aroon color = can run in open air or suberged) As with all MARCH pups, the latter two letters of the odel nuber (MD) indicate that the pup is agnetically coupled to the otor.

6 P A G E 6 odel AC-1A- MD odel 1U-MD odel 1A- MD SERIES to 3.0 gp Sall but versatile, March Series 1 pups can deliver a iniu of 1.7 GPM (7 LPM) up to 3.0 GPM (9 LPM). All Series 1 pups are capable of serving applications with a axiu head of 4.5 (1.3 ). at zero GPM (0 LPM). Applications include otograic processing equipent, refrigeration systes and water displays or fountains. Maxiu recoended fluid teperatures are 190º F (87º C) for open-air odels, or 130º F (55º C) for subersible odels. Series 1 pups are available in both open-air and epoxy clad subersible odels with a variety of options in both aterials of construction and and discharge ports. Options for wetted aterials include polypropylene, Noryl, nylon, Buna N rubber and 316 stainless steel. Most odels feature ceraic agnets and Cheloy washers. Series 1 pups are supplied with 1/4" MPT, 3/8" (9.5) O.D. 1/2" (12.7) O.D. or screened s and 1/4" MPT, 3/8" (9.5) O.D. or 1/2" (12.7) O.D. s. A bulkhead style is available on request. Pups with 1/2" (12.7) O.D. or 1/4" MPT and will flow 3.0 GPM (9 LPM) axiu at zero head, while pups with 3/8" (9.5) O.D. and will flow 1.7 GPM (7 LPM) axiu at zero Series 1 pups e 1/200 HP (.003 ), 3200 rp, 115- volt or 230-volt single ase, 50/60 Hz., air-cooled or epoxy encapsulated subersible otors (aroon in color), suitable for both open-air or subersible duty. Need cto specs? March will build it!

7 P A G E 7 odel 1A-MD with stainless steel base Flow curves ay vary depending on the current otors being ed. Contact your local distributor for accurate current data for layout purposes. ELECTRIC MOTORS ax. flow ax. head rp 2 volts 1 ap SERIES 1 otor type gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution 1 AC-1A-MD AC-1C-MD 1A-MD-3/ /2" OD 1/4" MPT 3/8" OD 1/2" OD 1/4" MPT Screen 1/2" OD 1/4" MPT 3/8" OD 1/2" OD 1/4" MPT 1/4" MPT 1/200 1/200 1/200 1/200 1/200 1/ /60 50/60 50/60 50/60 50/60 50/ AC AC TE/SUB TE/SUB TE/SUB SUB 16" (40c) 16" (40c) 6 (1.8) 6 (1.8) 6 (1.8) 6 (1.8) loose leads loose leads SJT w/plug SJT w/plug SJT w/plug SJT w/plug open air, 190 open air, 190 open air, 190 open air, 160 sub 160 sub 160 sub 160 sub open air, 87 open air, 87 open air, 87 open air, 71 sub 71 sub 71 sub 71 sub polypropylene, nylon, Buna N, Sae when pup is ed in open air,.316 stainless steel, ceraic when suberged, the Epoxy, Noryl, and SJT agnet, Cheloy washer. cord are also in contact with the solution. 1A-MD 1/2 1C-MD 1U-MD 1 Other aterials and voltages available on special order. Call (847) Fax (847)

8 P A G E 8 odel odel SERIES to 3.0 gp odel Designed to operate at 12 or 24 volts DC, March Series 893 pups are sall in ysical size and can deliver a axiu of up to 3.0 GPM (11 LPM) and can develop pressures up to 4.5 PSI (.31 BARS). All Series 1 pups are capable of serving applications with a axiu head of 10.5 (3.3) at zero GPM. They are anufactured in both open-air and fully subersible versions. Applications include otograic processing equipent, refrigeration systes and water displays or fountains. Maxiu recoended fluid teperatures are 190º F (87º C) for open-air odels, or 160º F (71º C) for subersible odels. Options for wetted aterials include Noryl, Delrin, nylon, Buna N rubber, 316 stainless steel. All odels feature ceraic agnets and Cheloy washers. Other aterials are available on special order. Series 893 pups are supplied with 3/8" FPT s and 3/8" (9.52) O.D. sooth s. Other size s and s for hose and threaded connections are available on special order. A bulkhead style is available on request. Series pups thru feature brh type otors, rated at 3000 hours. They e 1/150 HP (.004), 4000 rp, 12- or 24-volt DC, air-cooled or encapsulated subersible otors. For easy identification, subersible otors are blue in color. Models thru feature highly reliable brhless otors rated at a 50,000- hour service life. The 12-volt brhless otor will operate between 7 & 14 volts and draws 1.0 ap ax at wideopen flow when puping water. The 24-volt brhless otor will operate between 12 to 28 volts.

9 P A G E 9 odel ELECTRIC MOTORS ax. flow ax. head rp 2 volts 1 ap SERIES 893 gp lp otor type ax. int. pressure psi ax. liquid tep. F C aterials in contact with solution /8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" FPT 3/8" OD 3/8" OD 3/8" OD 3/8" OD 3/8" OD 3/8" OD 3/8" OD 3/8" OD 1/150 1/150 1/150 1/150 1/150 1/150 1/150 1/ DC DC DC DC DC DC DC DC AC SUB AC SUB AC AC SUB SUB Terinals 18" (45.5 c) Terinals 18" (45.5 c) 18" (45.5 c) 18" (45.5 c) 18" (45.5 c) 18" (45.5 c) loose leads loose leads loose leads loose leads loose leads loose leads open air, open air, open air, 190 open air, 160 sub 160 sub 130 sub 130 sub open air, open air, open air, 87 open air, 71 sub 71 sub 55 sub 55 sub Noryl, Nylon, Buna N, 316 Stainless Steel, Ceraic agnet, Cheloy washer, pl Epoxy & PVC wire on the sub pup Other aterials and voltages available on special order.

10 P A G E 1 0 odel MDXT odel MDX-3 1/2 odel MDX-MT3 SERIES MDX 5.5 to 8.4 gp AIR MOTORS Series MDX pups can deliver a axiu flow of 8.4 GPM (38 LPM), are capable of serving applications with a axiu head of 19 (4) (26 [9] when driven by an air otor). Applications include coffee dispensers, aquarius, bio-edical, dryers, ice akers, electrostatic painting, otograic processing, and vending equipent. Options for wetted aterials include glass filled polypropylene, Ryton, Kynar, 316 stainless steel, and Buna N rubber for total cheical copatibility. Most odels feature ceraic agnets and shafts and Viton O rings. Series MDX pups are offered with a variety of and port types and sizes as shown. Contact the factory for other sizes and types of s and s. Series MDX pups e 1/50 HP (.014 ) (1700 rp) to 1/15 HP (.049 ) (3450 rp), 115- or 115/230-volt single ase, 50/60 Hz., air-cooled otors. Air otors rated at 1/8 HP (.093 ) are also available for certain environents. Explosion proof otors available on TE-MDX-MT3 and TE-MDK-MT3. SERIES MDX ax. flow ax. head rp 2 ax. air pressure ax. CFM req d otor type ax. int. pressure gp lp psi psi ax. liquid tep. f aterials in contact with solution1 MDX-3 1/2-AM MDX-3 5/8-AM MDXT-3-AM MDX-MT3-AM MDK-MT3-AM /2" OD 5/8" OD 1/2" FPT 1/2" MPT 1/2" MPT 1/2" OD 5/8" OD 3/8" FPT 1/2" MPT 1/2" MPT 1/8 1/8 1/8 1/8 1/ AM AM AM AM AM Glass filled polypropylene, Ryton, Kynar, Buna N, Ceraic agnet Ceraic, Ceraic, Viton Viton 1 Other aterials available on special order. Need cto specs? March will build it!

11 P A G E 1 1 odel MDXT-3-AM odel TE-MDX-MT3 ELECTRIC MOTORS SERIES MDX MDX-1/2 MDX-5/8 MDXT MDXT-3 MDX-3 1/2 MDX-3 5/8 MDX-MT3 TE-MDX-MT3 TE-MDK-MT3 ax. flow ax. head rp1 volts2 ap gp lp otor type ax. int. pressure psi ax. liquid tep. f aterials in contact with solution /2" OD 5/8" OD 1/2" FPT 1/2" FPT 1/2" OD 5/8" OD 1/2" MPT 1/2" MPT 1/2" MPT 1/2" OD 5/8" OD 3/8" FPT 3/8" FPT 1/2" OD 5/8" OD 1/2" MPT 1/2" MPT 1/2" MPT 1/50 1/50 1/50 1/25 1/25 1/25 1/25 1/15 1/ / / / / /60 50/60 50/60 50/60 50/60 50/ /60 50/60 50/60 50/60 50/60 50/ /.43.86/ AC AC AC AC AC AC AC TEFC TEFC 3 (.9M) 3 (.9M) 3 (.9M) 3 (.9M) 3 (.9M) 3 (.9M) 3 (.9M) Conduit Conduit SJT Cord SJT Cord SJT Cord SJT Cord SJT Cord SJT Cord SJT Cord Box Box /2 51/2 51/ / Glass filled polypropylene, Glass filled polypropylene, Glass filled Ryton, Ryton, Kynar, Kynar, Ryton,Buna N, Ceraic shaft & thrt washer, polypropylene, Ceraic, Ceraic, Ceraic, Ceraic agnet Ceraic agnet, Buna N Kynar,Ryton, Viton Viton Viton Buna N, Ceraic agnet 1 Other aterials and voltages available on special order. Call (847) Fax (847)

12 P A G E 1 2 odel AC-2CP-MD with air otor SERIES gp odel 2CP-MD Copact and adaptable to any applications, March Series 2 pups can deliver a axiu flow of 5.5 GPM (18.5 LPM) and handle a axiu head of up to 13.5 (2.7 ) (32 [12 ] when driven by an air otor). Typical applications include etching equipent, otograic and graic arts processing equipent, garden fountains, ice flakers, plate processors and arine air conditioning. Maxiu recoended fluid teperatures are 190º F (87º C) for open-air odels, or 130º F (54º C) for subersible odels. Series 2 pups are available in both open air and epoxy clad subersible odels with a variety of options in both aterials of construction and and discharge ports. Options for wetted aterials include polypropylene, Noryl, nylon, Buna N rubber and 316 stainless steel. Blast-cooled odels have a polypropylene encased ipeller agnet. Most odels feature Buna N rubber O rings. Inlet options are 3/8" FPT, 3/4" MPT or 3/4" (19) O.D. sooth, while s are offered as 1/4 MPT and 1/2" (12.7) O.D. sooth. Series 2 pups e 1/35 HP (.021), 3200 rp or 1/40 HP (.018), 3450 rp 115- or 230-volt single ase, 50/60 Hz., air cooled or epoxy encapsulated subersible otors (aroon in color), suitable for both open air or subersible duty. Motors for subersible operation only are color-coded blue. Air otors rated at 1/8 HP (.93) are also available for certain environents. ax. flow ax. head SERIES 2 rp 2 ax. air pressure ax. CFM req d otor type ax. int. pressure odel LC-2CP-MD gp lp psi psi ax. liquid tep. f aterials in contact with solution 1 AIR MOTORS AC-2CP-MD-AM BC-2CP-MD-AM ,5 23, /8" FPT and 3/8" FPT and 3/4" MPT 3/4" MPT 1/4" MPT 1/4" MPT 1/8 1/ AM AM Polypropylene, Polypropylene, Ceraic, Viton, Ceraic, Viton, Ceraic agnet, Poly encased agnet 1 Other aterials available on special order.

13 P A G E 1 3 odel AC-2CP-MD odel BC-2CP-MD ELECTRIC MOTORS ax. flow ax. head rp 2 volts1 ap otor type SERIES 2 gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution 1 2CP-MD LC-2CP-MD AC-2C-MD /8" FPT and 3/8" FPT and 3/8" FPT and 3/8" FPT and 3/4" OD 3/8" FPT and 3/4" OD 3/4" MPT 3/4" MPT 3/4" MPT 3/4" MPT Sooth 3/4" MPT Sooth 1/4" MPT 1/4" MPT 1/4" MPT 1/4" MPT 1/2" OD 1/4" MPT 1/2" OD Sooth Sooth 1/35 1/35 1/40 1/40 1/40 1/40 1/ /60 50/60 50/60 50/60 50/60 50/60 50/ SUB TE/SUB AC AC AC BC BC blue 3 aroon- 6 (3.6M) 6 (3.6M) 3 (1.8M) 3 (1.8M) 3 (1.8M) 3 (1.8M) 3 (1.8M) SJT SJT SJO SJO SJO SJO SJO /2 4 1/2 4 1/2 6 1/2 6 1/ Epoxy, Polypropylene, Polypropylene, Polypropylene, Ceraic, Polypropylene, Ceraic, Viton, Polypropylene, Ceraic,Viton, Ceraic, Viton, Ceraic agnet Poly encased agnet Ceraic,Viton, 316 Stainless Buna N, 316 SJT cord, Steel Stainless Steel, Stainless Steel Ceraic agnet AC-2CP-MD AC-2AP-MD BC-2CP-MD BC-2AP-MD 1 Other aterials and voltages available on special order. 3 Blue color epoxy indicates that pup t be run fully suberged. - Maroon color epoxy indicates pup can be run in open air or suberged.

14 P A G E 1 4 odel AC-3CP-MD-AM odel LC-3CP-MD odel AC-3CP-MD or BC-3CP-MD SERIES 3 10 gp Siple, versatile and reliable, March Series 3 pups feature an orbital agnetic drive and leak-proof design. They are rated up to 10 GPM (33 LPM) flow and for heads up to 20.5 ft (4.5 ) (39 [13 ] when driven by an air otor). Typical applications include fil processors, ice akers, laboratory and edical equipent, vapor degreasers and arine air conditioning systes. Series 3 pups are available in both open air and epoxy clad subersible odels. A variety of aterials of construction ensure copatibility with alost any solution: polypropylene, Delrin, Viton, nylon, Buna N rubber, ceraic, and polysulfil plastic (subersible odels). Port options are 3/4" FPT with a 1/2" (12.7 ) MPT or a 3/4" (19 ) O.D. sooth with a 3/4" (19 ) O.D. sooth. Series AC 3 pups are driven by 1/15 HP (.018 ), 3200 (60 Hz, air cooled). Series BC 3 are 3450 rp (50/60 Hz, blast-cooled), all otors are ball bearing otors, epoxy subersible otors are 1/20 HP (.037 ), 3200 rp (aroon in color). Air otors rated at 1/8 HP (.093 ) are also available for certain environents. The 230-volt otors are all rated 50/60 Hz, subersible otors are rated 60Hz or 50 Hz. Specify which voltage and Hz when ordering the subersible odels. Need cto specs? March will build it!

15 P A G E 1 5 AIR MOTORS ELECTRIC MOTORS ax. flow ax. head rp 2 volts 1 SERIES 3 ax. air pressure ax. CFM req d ap otor type gp lp psi ax. int. pressure psi ax. liquid tep. f aterials in contact with solution 1 AC-3CP-MD-AM AC-3AP-MD-AM BC-3CP-MD-AM BC-3AP-MD-AM /4" FPT 3/4" OD 3/4" FPT 3/4" OD 3/4" FPT 3/4" FPT 3/4" OD 3/4" FPT 3/4" OD 1/2" MPT 3/4" OD 1/2" MPT 3/4" OD 1/2" MPT 1/2" MPT 3/4" OD 1/2" MPT 3/4" OD 1/8 1/8 1/8 1/8 1/20 1/15 1/15 1/15 1/ /60 50/ AM AM AM AM TE/SUB AC AC BC BC Maroon- 6 (1.8M) 3 ft (.9M) 3 ft (.9M) 3 ft (.9M) 3 ft (.9M) SJT SJO SJO SJO SJO /2 4 1/2 4 1/2 4 1/2 8 1/ Polypropylene, Ceraic Polypropylene, Ceraic, Polypropylene, Polypropylene, Ceraic Polypropylene, Ceraic, Viton agnet, Ceraic, Buna N Viton Epoxy Cupric agnet, Ceraic, Buna N Nickel, Buna N, Ceraic; when suberged, Sulfil LC-3CP-MD AC-3CP-MD AC-3AP-MD BC-3CP-MD BC-3AP-MD 1 Other aterials and voltages available on special order. - Maroon color epoxy indicates pup can be run in open air or suberged. Stainless steel cooling tube available on special order. Call (847) Fax (847)

16 P A G E 1 6 odel AC-4C-MD-AM odel AC-4C-MD odel BC-4C-MD SERIES 4 14 gp Series 4 pups can deliver a axiu flow of 14 GPM (50 LPM), and are capable of serving applications with a axiu head of 21.5 (4.7 ) (49 [15.6 ] when driven by an air otor). Applications include electronic edical equipent, etching achines, oto processing equipent, hospital theral blankets and food heating cabinets. Standard construction is of polypropylene, with options for wetted aterials that include Ryton or Kynar. Ceraic, Buna N rubber, and Viton for total cheical copatibility. Carbon bhings are available. MODEL 750 PRIMING RESERVOIR Material in contact with solution: Polypropylene and Viton Reservoir can be attached to: All Series 4 odels, AC-5C-MD TE-5C-MD, AC-5C-MD-AM AC-5.5C-MD, TE-5.5C-MD DP-6T-MD, TE-6T-MD Suction Lift - Max. length of pipe 10 (3 eters) 7 (2 eters) 6 (1.5 eters) Series 4 pups are available with a 1" FPT and 1/2" MPT, or a 1" (25.4 ) sooth and a 3/4" (19) sooth. Drive choices are a 1/12 HP (.062 ), 3450 rp aircooled or a 1/10 HP (.074 ) 3450 rp blast-cooled, 115-volt single ase, 50/60 Hz. otor. Air otors rated at 1/8 HP (.093 ) are also available for certain environents. 230-volt otors are all rated 50/60 Hz.

17 P A G E 1 7 odel BC-4C-MD with priing reservoir AIR MOTORS ELECTRIC MOTORS ax. flow ax. head rp 2 volts 1 SERIES 4 ax. air pressure ax. CFM req d ap gp lp psi otor type ax. int. pressure psi ax. liquid tep. f aterials in contact with solution 1 AC-4C-MD-AM AC-4A-MD-AM BC-4C-MD-AM BC-4A-MD-AM " FPT 1" OD 1" FPT 1" OD 1" FPT 1" OD 1" FPT 1" OD 1/2" MPT 3/4" OD 1/2" MPT 3/4" OD 1/2" MPT 3/4" OD 1/2" MPT 3/4" OD 1/8 1/8 1/8 1/8 1/12 1/12 1/10 1/ /60 50/60 50/60 50/ AM AM AM AM AC AC BC BC 3 ft (.9M) 3 ft (.9M) 3 ft (.9M) 3 ft (.9M) SJO SJO SJO SJO /2 81/ Polypropylene, Ceraic, Polypropylene, Ceraic, Polyproplene, Ceraic, Polyproplene, Ceraic, Ceraic agnet, Buna N Viton Ceraic agnet, Buna N Viton AC-4C-MD AC-4A-MD BC-4C-MD BC-4A-MD 1 Other aterials and voltages available on special order.

18 P A G E 1 8 odel AC-5C-MD-AM odel 5C-MD odel AC-5C-MD SERIES 5 18 gp March Series 5 pups are ideal for a wide variety of applications involving highly corrosive cheicals, such as fil processor cheical recirculation, refrigerators, sall scrubbers and detergent ixers. Models constructed of Kynar are typically ed in the plating indtry to pup strong halogen solutions and concentrated chroic or sulfuric acids. They are also excellent choices for coputer cooling, carbon arc furnace cooling and arine air conditioners. ax. flow ax. head rp 2 SERIES 5 gp lp AC-5C-MD-AM AC-5A-MD-AM AIR MOTORS TE-5A-MD-AM " FPT 1" OD 1" OD 1" FPT 1" FPT 1" FPT 1/2" MPT 3/4" OD 3/4" OD 1/2" MPT 1/2" MPT 1/2" MPT 1/8 1/8 1/8 1/8 1/8 1/ TE-5C-MD-AM TE-5K-MD-AM TE-5S-MD-AM Series 5 pups are rated up to 18 GPM (60.5 LPM) flow and for heads up to 29 (6.3) (50 [16] when driven by an air otor). Variations in wetted aterials on the Series 5 are soe of the widest in the March line, affording axiu copatibility with a wide variety of solutions. These aterials include polypropylene, Ryton, carbon-filled Kynar, 316 stainless steel, ceraic, Buna N rubber, and Viton ). Carbon bhings are also available, which also afford a dry run capability not found in other odels. The ipeller diaeter ay be tried to enable efficient e with solutions with a specific gravity in excess of to 18 GPM (60 to 60.5 LPM) odels utilize 1/8 HP (.093 ), 2800 or 3200 rp, subersible or air-cooled 115-volt, single ase, 50/60 Hz. otors. 18 GPM (60.5 LPM) odels have a 1/5 HP, 3450 rp, 115/230-volt, single ase, 50/60 Hz., totally enclosed fan-cooled otor. Air otors rated at 1/8 HP (.093 ) are also available for certain environents. Explosion-proof otors are also available. All series 5 pups except stainless steel are available with either threaded or hose type connections. The stainless steel version has threaded connections. Flanged connection can be special ordered. ax. air pressure ax. CFM req d otor type psi ax. int. pressure psi ax. liquid tep. f aterials in contact with solution1 1 Other aterials and voltages available on special order AM AM AM AM AM AM / Polypropylene, Ceraic Polypropylene, Carbon/Kynar, 316 St. Steel, Buna N, Ceraic agnet Ceraic, Viton Ceraic, Viton, Viton Ceraic, Carbon bhing Need cto specs? March will build it!

19 P A G E 1 9 odel TE-5S-MD ELECTRIC MOTORS SERIES 5 5C-MD LC-5C-MD AC-5C-MD AC-5A-MD TE-5A-MD TE-5C-MD TE-5K-MD TE-5S-MD ax. flow ax. head rp 2 volts1 ap otor type gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution " FPT 1" FPT 1" FPT 1" OD 1" OD 1" FPT 1" FPT 1" FPT 1/2" MPT 1/2" MPT 1/2" MPT 3/4" OD 3/4" OD 1/2" MPT 1/2" MPT 1/2" MPT 1/8 1/8 1/8 1/8 1/5 1/5 1/5 1/ / / / / / / / / /60 50/60 50/60 50/60 50/60 50/60 50/60 50/ / / / / SUB BLUE TE/SUB AC AC TEFC TEFC TEFC TEFC Maroon- 6 ft (1.8M) 6 ft (1.8M) 3 ft (.9M) 3 ft (.9M) Conduit Conduit Conduit Conduit SJT w/plug SJT w/plug SJO SJO Box Box Box Box /2 9 1/2 15 1/2 15 1/2 15 1/ Stainless Steel, Epoxy, Polypropylene, Ceraic, Polypropylene, Carbon/Kynar, 316 Stainless Polypropylene, SJT Cord, Buna N, Ceraic agnet Ceraic, Viton Ceraic, Viton, Buna N, Ceraic agnet Viton Ceraic, Carbon bhing 1 Other aterials and voltages available on special order. - Maroon color epoxy indicates pup can be run in open air or suberged. BSP threads available on special order on plastic pups. Call (847) Fax (847)

20 P A G E 2 0 odel TE-5.5C-MD with AC otor SERIES gp odel TE-5.5S-MD The 5.5 series pups are the first in the March product line to eploy an involute design with a closed ipeller agnet assebly. They can deliver a axiu flow of 30 GPM (110 LPM), and are capable of serving applications with a axiu head of 41 (9). Able to handle cheicals of all kinds at teperatures up to 190º F (87º C), es range fro iceakers to fil processors and silver recovery systes. Units with Kynar plastic construction can handle strong halogen solutions and certain chroic or sulfuric acid solutions. Other options for wetted aterials include glass filled polypropylene, ceraic, Viton, and 316 stainless steel. Optional bhings, O rings and spindle cobinations are available. Drive otors are a 1/5 HP (.149 ), 3200 rp, 115-volt single ase air-cooled or a 1/3 HP (.248 ) 3450 rp, 115/230-volt single ase or 230/460-volt three-ase totally enclosed, 50/60 Hz. otor. Explosion-proof otors are also available. Standard port configuration is a 1" FPT with a 3/4" MPT. 1 Other aterials and voltages available on special order. Priing reservoir available. BSP threads available on special order on plastic pups. Explosion proof otors available. Carbon bhings available for dry running. Other bhing aterials available for vario cheical solution. Flanges are available on special order. ax. flow ax. head SERIES 5.5 rp 2 volts1 ap otor type gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution1 TE-5.5C-MD W/AC MOTOR ELECTRIC MOTORS TE-5.5C-MD TE-5.5K-MD " FPT 1" FPT 1" FPT 1" FPT 3/4" MPT 3/4" MPT 3/4" MPT 3/4" MPT 1/5 1/3 1/3 1/ / / / / / / / / / / / / , 3 1, 3 1, 3 TE-5.5S-MD 50/60 50/60 50/60 50/ , , , , , , / / / /.6 1.3/.6 1.3/ , , , 1.26 AC TEFC TEFC TEFC Conduit Box Conduit Box Conduit Box Conduit Box /2 34 1/ Polypropylene, Carbon filled 316 Stainless Ceraic, Viton Kynar, Steel, Viton, Ceraic, Ceraic, Viton Carbon bhing

21 P A G E 2 1 ax. flow ax. head rp 2 volts1 ap odel DP-6T-MD SERIES 6 otor type gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution 1 DP-6T-MD TE-6T-MD odel TE-6T-MD ELECTRIC MOTORS " FPT 1" FPT 1" FPT 1" FPT 1" FPT 3/4" MPT 3/4" MPT 3/4" MPT 3/4" MPT 3/4" MPT 1/2 1/2 1/2 1/2 1/ / / / / / / / / / / /60 50/60 50/60 50/ /60 50/60 50/60 50/ / / / / / / / / / /.75 DP TEFC TEFC TEFC TEFC Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box /2 34 1/ / Glass filled polypropylene and Ryton, Ceraic, Carbon filled Kynar, Ceraic, Viton, Tefon/Ryton bhing Viton, Carbon bhing TE-6T-MD TE-6K-MD TE-6K-MD SERIES 6 38 gp Suitable for a range of applications fro coercial-size aquarius and D.I. water systes to etching equipent and electrical discharge achinery (EDM), Series 6 pups are the only odels in the March line equipped with a drip-proof otor (DP) as standard. Other otors are totally enclosed fan-cooled, single and three-ase and explosion-proof. All are rated at 1/2HP (.372 ), 3450 rp, 115/230-volt 50/60 Hz, single-ase or 230/460- volt three-ase, 50/60 Hz. Series 6 pups have a capacity of up to 38 GPM (110.5 LPM) with a axiu of 46 feet (11) of head. They can be ade copatible with a wide range of cheicals through a yriad of O rings, bhings and spindle aterial alternatives available. Models anufactured of Kynar (PVDF) are particularly suited for difficult solutions, such as those based on halogens or chroic and sulfuric acids. Additional aterial options include glass-filled polypropylene, Ryton, ceraic and Viton. Standard ports are a 1" FPT with a 3/4" MPT. Ports with a 1-11 BSP feale and 1 1/4-14 BSP with O ring groove ale are available on special order. 1 Other aterials and voltages available on special order. Priing reservoir available. BSP threads available on special order on plastic pups. Explosion proof otors available. Carbon bhings available for dry running. Other bhing aterials available for vario cheical solution. Flanges are available on special order.

22 P A G E 2 2 odel TE-7R-MD odel TE-7S-MD odel SP-TE-7P-MD SERIES 7 53 gp Series 7 totally enclosed pups, with capacities up to 53 GPM (180 LPM) or a axiu 60 (12) head, are the workhorses of the March product line. Typical applications include coputer cooling, oto processing, graic printing, ion exchange recovery/ developent, and aquarius. The standard otor ed in Series 7 pups is a true 3/4HP (.558 ). In addition, a 1 HP and 1 1/2 HP otor can be supplied, as well as vario explosion-proof and cheical duty otors. A 1 HP self-priing odel, with a suction lift capability of 10 (3), ay be specified for applications where gravity feed is not available. Installations ing such otors require no openings in the side of the fluid container. Vario specific gravities can be handled by triing the diaeter of the ipeller agnet assebly. The standard 3.750" ipeller ay be reduced in size to a 3.125" to accoodate specific gravities of up to 2.0. The front ipeller shroud can be reoved for special applications. Wetted aterials are ade of polypropylene, with the exception of the rear hoing, which is anufactured of Ryton for additional strength. Additional options for wetted aterial include all polypropylene, ceraic, all Kynar (ideal for handling difficult liquids such as strong halogen, chroic or sulfuric acid solutions), Viton, 316 stainless steel and Hastelloy. Bhing aterial (the selection of which depends on the nature of the solution being puped) ranges fro standard carbon to ica-filled Teflon and a Teflon /Ryton /carbon coposite. To insure coplete aterial/solution copatibility, a variety of spindles are also available. A ceraic spindle is standard, while stainless steel and Hastelloy are also available. Each can handle solutions that contain inute solids. Standard ports are a 1 1/2" FPT with a 1" MPT. Ports with a 1 1/2-11 BSP Feale and 1 1/2-BSP with O ring groove ale are available on special order. Need cto specs? March will build it!

23 P A G E 2 3 ELECTRIC MOTORS SELF-PRIMING CENTRIFUGAL PUMPS ax. flow ax. head rp 2 volts1 ap otor type SERIES 7 gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution 1 TE-7R-MD TE-7R-MD TE-7K-MD TE-7K-MD TE-7S-MD /2" FPT 1 1/2" FPT 1 1/2" FPT 1 1/2" FPT 1 1/2" FPT 1 1/2" FPT 1 1/2" FPT 1 1/2" FPT 1 1/2" MPT 1 1/2" MPT 1" MPT 1" MPT 1" MPT 1" MPT 1" MPT 1" MPT 1" MPT 1" MPT 1" MPT 1" MPT 3/4 3/4 3/4 3/ / / / / / / / / /208/ /230/ / / / / / / / / /208/ /230/ /60 50/60 50/60 50/60 50/60 50/60 50/60 50/ /60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/ / / / / / / / / /6.4/ /2.9/ / / / / / / / / /6.4/ /2.9/1.45 TEFC TEFC TEFC TEFC TEFC TEFC TEFC TEFC TEFC TEFC Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box / / / Glass filled polypropylene and Carbon filled Kynar, Ceraic 316 Stainless Steel, Ceraic, Hastelloy, C, Ceraic, Glass filled polypropylene, Ryton, Ceraic, Viton, Viton, Carbon bhing Viton, Carbon bhing Viton, Carbon bhing Ceraic, Viton, Carbon bhing, Teflon/Ryton bhing (Carbon filled Kynar available) TE-7S-MD TE-7H-MD TE-7H-MD SP-TE-7P-MD SP-TE-7P-MD 1 Other aterials and voltages available on special order. BSP threads available on special order on plastic pups. Explosion proof otors available on all odels. Carbon bhings available for dry running. Other bhing aterials available for vario cheical solutions. Call (847) Fax (847)

24 P A G E 2 4 odel TE-7.5K-MD SERIES gp Series 7.5 pups are the only ones in the March product line with all olded parts constructed of natural Kynar. This akes the ideal for super sensitive applications where even a trace of foreign atter is unacceptable, such as icrochip anufacturing. Vario bhing aterials are available for such applications where purity of solutions is critical. Other coponent aterials are Viton, Teflon or ethylene propylene O rings, ceraic thrt washer and spindle and carbon bhings. Flow rates range fro 10 GPM (35 LPM) iniu to 82 GPM (268 LPM) axiu. Head ranges fro 0 to a axiu of 85 (18). Other application exaples include plating equipent and D.I. water systes. Standard with the Series 7.5 pup is a 2 HP (1.49 ), 230/460-volt, three-ase, totally enclosed otor. Severe duty and explosion-proof otors are also available. Standard port configuration is a 2" MPT with a 1 1/2" MPT. ax. flow ax. head rp 2 volts1 SERIES 7.5 ap otor type gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution1 ELECTRIC MOTORS TE-7.5K-MD " MPT 1 1/2" MPT / / / / /2.6 TEFC Conduit Box Natural PVDF, Ceraic, Viton, Carbon bhing 1 Other aterials and voltages available on special order. Explosion proof otors available on all odels. Carbon bhings available for dry running. Other bhing aterials available for vario cheical solutions. Need cto specs? March will build it!

25 P A G E 2 5 odel TE-8C-MD ax. flow ax. head rp 2 volts1 ap otor type SERIES 8 gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution1 ELECTRIC MOTORS " MPT 2" MPT 2" MPT 1 1/2" MPT 1 1/2" MPT 1 1/2" MPT / / / / / / / / / / / /5.9 TEFC TEFC TEFC Conduit Box Conduit Box Conduit Box Polypropylene Carbon filled, 316 Stainless front hoing, Kynar, Steel, Viton, Kynar PVDF rear, Ceraic,Viton, Ceraic, Carbon Viton, Teflon / Carbon bhing Ryton bhing, bhing Ceraic 1 Other aterials and voltages available on special order. TE-8C-MD BSP threads available on special order on plastic pups. TE-8K-MD TE-8S-MD SERIES gp March Series 8 totally enclosed pups, with standard wetted parts of glass-filled polypropylene, carbon-filled Kynar and 316 stainless steel, are the ideal choice for handling difficult liquids, such as strong halogen or chroic, and sulfuric acid solutions. Typical applications range fro coputer cooling systes and waste treatent plants to plating operations, oto processors and cheical plants. Flow rates range fro 25 GPM (90 LPM) iniu to 125 GPM (400 LPM) axiu at heads fro 0 to 95 (20) axiu. Standard bhing aterials include carbon, Teflon / Ryton /carbon coposite and ica-filled Teflon. These ay be ed with either glass-filled polypropylene, Kynar or 316 stainless steel ipeller agnet asseblies to insure coplete cheical copatibility. The standard spindle for all three odels is ceraic, while Hastelloy and stainless steel are available on special order for enhanced cheical resistance. Both the front and rear thrt washers are available in ceraic, Hastelloy, or (exclive to Series 8 and Series 10 odels) silicon carbide. Viton, ethylene propylene or Teflon O rings are available to further ensure cheical copatibility. Available 3450 rp totally enclosed drive otors are the standard 3HP (2.235 ), three-ase 230/460-volt and the 5 HP (3.725 ), three-ase 230/460-volt explosionproof odel (ed in the stainless steel pup). A steel frae totally enclosed otor that is not cheical-resistant is also available. Standard port configuration is a 2" MPT with a 1 1/2" MPT. Call (847) Fax (847)

26 P A G E 2 6 odel # TE-10K-MD SERIES gp The largest and newest cheical pup in the March product line, the innovative Series 10 is an ideal transfer pup for any strong acid and catic cheical solutions, such as those based on halogens or chroic and sulfuric acids. Made of carbon-filled Kynar plastic (PVDF), it is designed for coplete cheical copatibility. Other aterials include carbon-filled Kynar, ceraic, and Viton. Standard bhings are carbon. Flow rates range fro 50 GPM (175 LPM) iniu to 210 GPM (680 LPM) axiu. Head ranges fro 0 to 170 (35) axiu. To insure sooth operation with vario specific gravities over 1.0, the ipeller agnet assebly ay be tried to a iniu diaeter of 5.250" (135 ). The electric otor drive is a 10 HP (7.45 ), 230/460- volt three-ase, totally enclosed cheical duty otor. An explosion-proof 15 HP is available on special order. Standard port configuration is a 3" MPT with a 2" MPT. Becae the Series 10 pup is anufactured of only one aterial for soe rather specific applications, the variations in bhings, thrt washer and static O rings are liited. A pup application questionnaire t be copleted and subitted to the March Engineering Departent to ensure proper job-specific design. ax. flow ax. head rp 2 volts1 ap SERIES 10 otor type gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution1 ELECTRIC MOTORS TE-10K-MD " MPT 2" MPT / / / /13.5 TEFC Conduit Box Carbon filled, Kynar, Ceraic, Viton, Carbon bhing 1 Other aterials and voltages available on special order. Need cto specs? March will build it!

27 P A G E 2 7 odel 821-BR odel 821-CI-T HYDRONIC PUMPS ELECTRIC MOTORS 3 to 22 gp SERIES 821 ax. flow ax. head rp 2 volts1 ap otor type gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution 821-CI 821-CI-T 821-BR 821-BR-T Flange 3/4" FPT Flange 3/4" FPT Flange 3/4" FPT Flange 3/4" FPT 1/20 1/20 1/20 1/ /60 50/60 50/60 50/ BC BC BC BC Conduit Box Conduit Box Conduit Box Conduit Box /2 14 1/ Cast Iron, 316 Stainless Steel, Bronze, 316 Stainless Steel, Ryton Plastic, Carbon Bhing Ryton Plastic, Carbon Ceraic, Nitrile/Fibre Gasket Nitrile/Fibre Gasket The Ultiate in Reliability in Circulating Pups for Indtrial/Hydronic/Solar Applications. Depending on application, March hydronic pups are available in a variety of aterials, including plastic, bronze, stainless steel, and cast iron. Specific odels are designed to operate with fluid teperatures as high as 350º F (176º C), such as in hot water systes or with hot oil for food products. Special designs can withstand teperatures up to 500º F (260º C). Models are available for e on 12- and 24-volt DC systes (for es such as heating systes on public bes) as well as 115- or 230-volt AC systes (popular for e in doestic, indtrial and coercial hot water and solar heating applications). Maxiu flow rates range fro 5.5 GPM (13.7 LPM) to 7.5 GPM (.22 LPM) for DC-powered units, and fro 4.5 GPM (13.7 LPM) to 8 GPM (28 LPM) with AC-powered odels. Becae the otors can be reoved without draining the syste, service is greatly siplified. Larger pups are available with either flange or threaded s and s. 1 Other aterials and voltages available on special order. Call (847) Fax (847)

28 P A G E 2 8 odel 809-BR-HS-C odel 809-BR odel 809-BR-12 SERIES 809& BR 809-PL 809-BR-C 809-BR BR BR-HS 809-PL-HS 809-PL-HS-C 809-BR-HS BR-HS BR 815-BR-C ax. flow ax. head (C = center )3 3 rp1 volts2 ap gp lp otor type ax. int. pressure psi ax. liquid tep. f aterials in contact with solution /2" MPT 1/2" MPT C 3/4" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/2" MPT C 3/4" MPT 1/2" MPT 1/2" MPT 1/2" MPT C 3/4" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/2" MPT 1/100 1/100 1/100 1/100 1/100 1/25 1/25 1/25 1/25 1/25 1/25 1/ DC DC DC DC DC DC DC DC AC AC AC AC AC AC AC AC AC AC AC AC Conduit Conduit 3 SJO Terinals Terinals Conduit Conduit 3 SJO Terinals Terinals Conduit 3 SJO Box Box Box Box Box /2 4 1/2 5 1/ /2 4 1/2 4 1/2 5 1/ PUMP HOUSING: BR is Bronze, PL is Polysulfil Plastic. 316 Stainless Steel, Silicon rubber O ring, Ryton and Teflon plastic ipeller. 3 Flare style and solder connections available on special order. 1 Other aterials and voltages available on special order. Brh life is a iniu of 10,000 hours. Brh life is a iniu of 7,500 hours. Center hoing for 809 series can be supplied in stainless steel.

29 P A G E 2 9 odel 830-F with D.C. otor odel 830-BR-T SERIES 869& 830 ELECTRIC MOTORS ELECTRIC MOTORS SERIES CI 869-CI-T SERIES CI 830-CI-T 830-BR 830-BR-T 830-BR-T BR-F BR-T BR-F-24 ax. flow gp lp ax. flow gp lp ax. head ax. head Flange 3/4" FPT Flange 3/4" FPT Flange 3/4" FPT 3/4" FPT Flange 3/4" FPT Flange Flange 3/4" FPT Flange 3/4" FPT Flange 3/4" FPT 3/4" FPT Flange 3/4" FPT Flange 1/20 1/20 1/5 1/5 1/5 1/5 1/6 1/6 1/6 1/ rp rp volts volts /60 50/60 50/60 50/60 50/60 50/60 DC DC DC DC ap ap otor type BC BC otor type AC AC AC AC AC AC AC AC Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Conduit Box Terinals Terinals Terinals Terinals ax. int. pressure psi ax. int. pressure psi ax. liquid tep. f ax. liquid tep. f weight packed lbs weight packed lbs /2 21 1/ aterials in contact with solution Cast Iron, 316 Stainless Steel, Nylon Plastic, Ceraic Bhing, Nitrile/Fibre Gasket aterials in contact with solution Cast Iron, 316 Stainless Steel, Bronze, 316 Stainless Steel, Pup Casings: BR is Bronze, 316 Stainless Steel Rear Hoing, Ryton Plastic, Ceraic, Ryton Plastic, Ceraic, Carbon/Ryton Plastic Ipeller, Ceraic Thrt Washer Nitrile/Fibre Gasket, Carbon Nitrile/Fibre Gasket, Carbon and Nitrile Fibre Gasket

30 P A G E 3 0 odel 802 odel 851 odel AC-1A- MD DUAL HEAD PUMPS 3 to 8 gp March dual head pups are the choice for applications requiring siultaneo puping of two different solutions (such as in fil processing equipent). A variety of construction aterials ensures proper cheical copatibility for any applications. ax. flow each head ax. head rp 2 volts 1 ap gp lp otor type ax. int. pressure psi ax. liquid tep. f aterials in contact with solution /2" OD 5/8" OD 1/2" OD 5/8" OD 1/8 1/ /60 50/ AC AC 2 (.6M) 3 ft (.9M) SJO SJO / Polypropylene, Polypropylene, Type 316 Ceraic, Viton, Stainless Steel, Ceraic agnet Viton, Ceraic agnet 1 Other aterials and voltages available on special order odel AC-1A- MD / AC-2AP-MD AC-1A-MD AC-1A-MD AC-2AP-MD /2" OD 1/2" OD 1/2" OD 1/2" OD 1/2" OD 1/2" OD 1/175 1/25 1/ /60 50/ AC AC AC 16" (40c) 3 (.6M) 3 (.6M) loose leads SJO SJO /2 5 1/2 5 1/ Polypropylene, Polypropylene, Polypropylene, Nylon, Buna N, Stainless Steel, Ceraic, 316 Stainless Viton, Ceraic Viton Steel, Ceraic agnet, agnet, Cheloy Cheloy Washer Washer Need cto specs? March will build it!

31 P A G E 3 1 odel SERIES 140 ax. flow ax. head rp volts ap otor type gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution ELECTRIC MOTOR /8" OD 7/8" OD 1/ / AC 3 ft (.9M) SJT Glass filled polypropylene, Buna N, Ceraic agnet, Ceraic SERIES gp Use the copact Series 140 pups where axiu flow with inial pressure is desired. Maxiu flow is 12.5 GPM (55 LPM) and axiu head is 11.5 (2.5) Series 140 pups e 1/20 HP (.037 ), 2900 rp 115- volt air-cooled otors, and are ade with a variety of aterials such as glass-filled polypropylene, Buna N rubber, ceraic, Ryton, Teflon and Viton. Call (847) Fax (847)

32 P A G E 3 2 odel 320-CP-MD odel 320-AP-MD SERIES 320 & 335 CENTRIFUGAL PUMPS This copact, corrosion-resistant pup has the durability for continuo duty in applications requiring low flow, yet higher pressure. Typical exaples include laser cooling, edical systes, filter systes and vario processing equipent in the electronics indtry such as coputer chip processing. 3.3 gp Flow rates range fro 0 to 3.3 GPM (11.3 LPM) axiu, at heads ranging fro 0 to 40 (8.8 ) axiu. Series 320 pups e a 1/12 HP (.063 ), 3450 rp, 115- or 230-volt single-ase, 50/60 Hz., air-cooled otor and are supplied with a 5/8" (15.9 ) O.D. sooth and a 1/2" (12.7) O.D. sooth, or a 1/2-14 MPT and a 3/8-18 MPT. 12 gp Flow rates range fro 0 to 12 GPM (45A LPM) axiu, at heads ranging fro 0 to 68 (20.7) axiu. Series 335 pups e a 1/3 HP (.248 ), 3450 rp, 115- or 230-volt single-ase 50/60 Hz. TEFC otor. Also available with a three-ase 230- or 460-volt otor. ax. flow ax. head rp 2 volts1 ap gp lp ax. int. pressure psi ax. liquid tep. f aterials in contact with solution /8" OD 1/2"-14 3/4" OD 3/4"-14 Sooth MPT Sooth MPT 1/2" OD Sooth 3/8"-18 MPT 3/4" OD Sooth 3/4"-14 MPT 1/12 1/12 1/3 1/ / / / / /60 50/60 50/60 50/ / / / / Glass filled polypropylene, Glass filled polypropylene, ceraic spindle and thrt ceraic spindle and thrt washers, Viton O Ring washers, Viton O Ring 1 Other aterials and voltages available on special order. 320-AP-MD 320-CP-MD 335-AP-MD 335-CP-MD Hoing available with 3/4 O.D. sooth and, or 3/4-14 MPT and.

33 P A G E 3 3 odel 335-AP-MD odel METERING PUMPS METERING PUMPS ax. flow ax. head rp volts ap cc/in otor type ax. int. pressure psi ax. liquid tep. f aterials in contact with solution ELECTRIC MOTORS to to to /4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/4" FPT 1/50 1/50 1/ AC AC AC 6 ft (1.8M) 6 ft (1.8M) 6 ft (1.8M) SJT w/ plug SJT w/ plug SJT w/ plug /2 5 1/ Ryton, Viton, Teflon, Ceraic up to 1000 cc/in March positive displaceent cheical feed pups are designed for precision etering and accurate dispensing. They are recoended for interittent duty only. Flow rates can be precisely regulated while the pup is running by adjting the flow control lever and locking it in position with a thub screw lock. The 1/50 HP (.014 KW) air-cooled otor operates at up to 235 rp on 115-volt, 60Hz AC systes. Both and are 1/4 FPT. Construction aterials, which include Ryton, Viton, Teflon and ceraic, ensure proper cheical copatibility for any types of solutions.

34 P A G E 3 4 odel 2C odel 2U SEAL TYPE PUMPS ELECTRIC MOTORS Copact and inexpensive, March Seal-Type pups can deliver a axiu flow of 6.5 GPM (18.5 LPM) and handle a axiu head of up to 12.5 (2.7 M). Typical applications include advertising displays, ice flakers, iceakers and achine oiling systes. Maxiu recoended fluid teperatures are 130º F (54º C). Seal-type pups are available in both open air and epoxy clad subersible odels. Options for wetted aterials include Noryl, Delrin, nylon, Viton, stainless steel, cork and neoprene. A Viton rubber spring loaded lip seal prevents the liquid fro entering into the sealed otor area. Inlet options are 3/8 FPT, 3/8" MPT while s are 1/4" MPT. Seal-type pups e 1/75 or 1/35 HP (.009 to.021 Kw), 3200 rp, 115 volt single ase, 50/60 Hz., epoxyencapsulated subersible otors (aroon in color), suitable for both open air or subersible duty. Motors for subersible operation only are color-coded blue. SEAL TYPE PUMPS ax. flow ax. head rp volts ap gp lp otor type ax. int. pressure psi ax. liquid tep. f aterials in contact with solution 1C 1U 1-1C /8" MPT SCREEN 3/8" MPT SCREEN 3/8" FPT SCREEN 1/4" MPT 1/4" MPT 1/4" FPT 1/4" MPT 1/4" MPT 1/4" MPT 1/75 1/75 1/75 1/75 1/35 1/ TE/SUB SUB TE/SUB SUB SUB SUB 6 ft (1.8M) 6 ft (1.8M) 6 ft (1.8M) 6 ft (1.8M) 6 ft (1.8M) 6 ft (1.8M) SJT w/ plug SJT w/ plug SJT w/ plug SJT w/ plug SJT w/ plug SJT w/ plug Nylon, Stainless Nylon, Delrin, Nylon, Stainless Nylon, Delrin, Nylon, Stainless Nylon, Delrin, Steel, Viton, Noryl, Stainless Steel, Viton, Noryl, Stainless Steel, Viton, Noryl, Stainless Cork & Steel, Viton, Cork & Steel, Viton, Cork & Steel, Viton, Neoprene Cork & Neoprene Cork & Neoprene Cork & Gaskets, Neoprene Gaskets, Neoprene Gaskets, Neoprene Aluinu Aluinu Aluinu bracket bracket bracket 1-1U 2C 2U Need cto specs? March will build it!

C A T A L O G MARCH PUMPS

C A T A L O G MARCH PUMPS C A T A L O G MARCH PUMPS C H E M I C A L O E M I N D U S T R I A L H Y D R O N I C S O L A R P A G E 2 MARCH SEAL- LESS MAGNETIC DRIVE PUMPS The ultimate in reliable performance for chemical, OEM, indtrial,

More information

MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS

MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS W W W. M A R C H P U M P. C O M MARCH PUMPS Why a magnetic drive pump? A magnetic drive pump is sealless, preventing any leakage that is normally associated

More information

NO SHAFT SEAL, LESS PROBLEMS UP TO 200GPM AND 160 FEET MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS

NO SHAFT SEAL, LESS PROBLEMS UP TO 200GPM AND 160 FEET MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS NO SHAFT SEAL, LESS PROBLEMS UP TO 200GPM AND 160 FEET MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS MARCH PUMPS Why A ic Drive Pump A magnetic drive pump is sealless, preventing any leakage that is normally

More information

IWAKI MAGNETIC DRIVE PUMPS MDW. Patent JAPAN / U.S.A. / EU / CHINA / TAIWAN

IWAKI MAGNETIC DRIVE PUMPS MDW. Patent JAPAN / U.S.A. / EU / CHINA / TAIWAN IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / EU / CHINA / TAIWAN Max. flow capacity of 300 3 /hr and ax. discharge head of 98. The world s largest class fluoroplastic agnetic drive pup. The series

More information

SELF-PRIMING CENTRIFUGAL PUMPS

SELF-PRIMING CENTRIFUGAL PUMPS OPERATING RANGE Flow rates up to: /h Mano. head up to: 6 CE Operating pressure: 6 bar Teperature range: - to + C* Connection: / to DN to DN Flange PN: PN/6 Max. solids: DN * According to odel S SELF-PRIMING

More information

8K Series Pumps Stainless Steel Multistage Centrifugal Pumps

8K Series Pumps Stainless Steel Multistage Centrifugal Pumps 8K Series Pups Stainless Steel Multistage Centrifugal Pups Product Quality, Reliability and Support You Expect www.catpups.co 8K Multistage Centrifugal Pups Designed for long-life and trouble free service,

More information

Magnetic drive pumps MX series

Magnetic drive pumps MX series PDFA 64 Magnetic drive pups MX series ithstands difficult operating conditions and offers high efficiency The MX Series represents the latest state of the art design in plastic agnetic drive pups. ith

More information

NH 50Hz SEWAGE PUMPS

NH 50Hz SEWAGE PUMPS www.tsuruiuniverse.co NH Hz SEWAGE PUMPS Subersible Sewage Pups TSURUMI UNIVERSE is a new brand of products fro TSURUMI, a leading copany in the field of subersible pups for over 9 years. It has been developed

More information

09/2012 Submersible Pumps

09/2012 Submersible Pumps GM Subersible Pups 7 7 GM Subersible Pups GMV Subersible pups with vortex ipeller in cast iron EN-GJL- pag. GMVS Subersible pups with vortex ipeller in cast iron with polyurethane coating pag. 7 GM GMN

More information

VS 6-8 SERIES 50Hz SUBMERSIBLE PUMPS, MOTORS and ACCESSORIES

VS 6-8 SERIES 50Hz SUBMERSIBLE PUMPS, MOTORS and ACCESSORIES VS 6-8 SERIES 5Hz SUBMERSIBLE PUMPS, MOTORS and ACCESSORIES INEX VS SERIES 6 VS Series Stainless Steel Subersible Pups for 6 deep wells and larger General Product Curves 6 Materials/Fluids copatibility

More information

MAX FLUID TEMPERATURE

MAX FLUID TEMPERATURE Operation is similar to standard centrifugal pumps, except the impeller is driven with a magnetic coupling, eliminating the need for a shaft seal. Magnetic drive pumps must be used where flooded suction

More information

09/2012 Submersible Pumps

09/2012 Submersible Pumps GM Subersible Pups 3 24 GM Subersible Pups GMV with vortex ipeller in cast iron N-GJL-2 pag. 2 GMVS with vortex ipeller in cast iron with polyurethane coating pag. 2 GM GMN with single channel ipeller

More information

PRORIL. PRORIL Pumps Europe

PRORIL. PRORIL Pumps Europe SUBMERSIBLE PUMPS 1 PRORIL PRORIL was established in 1979, starting fro a sall otor factory where it has transfored itself into a global size subersible pup anufacturer. Its perseverance and dedication

More information

6 50 Hz Stainless Steel Submersible Pumps

6 50 Hz Stainless Steel Submersible Pumps Hz Stainless Steel Subersible Pups -Inch: 1, 19,, & /h flow ratings Advanced technology in perforance and reliability. Stainless Steel Subersible Pups Subersible Pups - Hz 7 U S gp 1 1 SR 19 up to 7 kw

More information

ALME / ALPE ELECTRONIC IN-LINE PUMPS FOR CIRCULATION SYSTEMS TECHNICAL DATA

ALME / ALPE ELECTRONIC IN-LINE PUMPS FOR CIRCULATION SYSTEMS TECHNICAL DATA LME / LPE FOR CIRCULTION SYSTEMS TECNICL DT Operating range: fro 1 to, ³/h with head up to 1 etres. Liquid teperature range: fro -1 C to +1 C. Puped liquid: clean, free of solids and abrasives, non-viscous,

More information

igubal Pillow Block Lifetime calculation, configuration and more igubal pillow block

igubal Pillow Block Lifetime calculation, configuration and more   igubal pillow block igubal Pillow Block Maintenance-free, dry running High tensile strength High endurance strength Can be used in cobination with E series rod ends Lightweight 801 igubal igubal Pillow Block The igubal bearings

More information

Aqualift F XXL 400 V 60 Hz

Aqualift F XXL 400 V 60 Hz qualift F XXL V 6 Hz High Lifting Stations Made in Gerany www.kessel.co With ulti-language digital display USB port for software up-dates High efficiency single channel ipeller qualift F XXL V 6 Hz High

More information

submersible dewatering pumps eng 50 Hz

submersible dewatering pumps eng 50 Hz subersible dewatering pups eng Hz Welcoe to PUMPEX, one of the world s leading anufacturers of subersible dewatering pups. Dedicated Partner Pupex is a coplete equipent supplier for professional dewatering

More information

Cast Iron Submersible Pumps 10" 12" 14"

Cast Iron Submersible Pumps 10 12 14 Cast Iron Subersible ups 1" 1" 14" Subersible ups Cast Iron Subersible ups 5-54 3 /h The FT Series pups have been engineered in a Cast Iron construction for efficient and reliable puping of water for agricultural,

More information

VX 40 - VX 65 VORTEX. Submersible pumps. PERFORMANCE RANGE Flow rate up to 1500 l/min (90 m3/h) Head up to 26 m

VX 40 - VX 65 VORTEX. Submersible pumps. PERFORMANCE RANGE Flow rate up to 1500 l/min (90 m3/h) Head up to 26 m VX 0 - VX 65 Subersible pups VORTEX Sewage water Civil use Industrial use PERFORMANCE RANGE Flow rate up to 1500 (90 3/h) Head up to 26 APPLICATION LIMITS 10 axiu iersion depth (with a sufficiently long

More information

Prolac MSHCP. Centrifugal Pump. I Application. I Design and features. I Mechanical seal. I Technical specifications

Prolac MSHCP. Centrifugal Pump. I Application. I Design and features. I Mechanical seal. I Technical specifications Prolac MSHCP I Application Due to the choice of aterials and its design, PROLAC HCP is appropriate for applications requiring a high level of hygiene, it offers gentle handling of the product and resistance

More information

Electric winch model RPE

Electric winch model RPE Electric winch odel RPE 250-1000 Winches series RPE and RPA are designed explicitly for perforance, efficiency and safety and offer any advantages and options. RPE's and RPA's extreely copact, practical

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G5--/4 G6--/4 SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 500RPM

More information

09/2012 Submersible Pumps

09/2012 Submersible Pumps GM Subersible Pups 37 27 GM Subersible Pups GMV Subersible pups with vortex ipeller in cast iron ENGJL2 pag. 2 GMVS Subersible pups with vortex ipeller in cast iron with polyurethane coating pag. 27 GM

More information

DIE TWIN HEAD PUMPS IN-LINE ELECTRONIC CONTROL Heating - Air conditioning S.H.W. 50 Hz

DIE TWIN HEAD PUMPS IN-LINE ELECTRONIC CONTROL Heating - Air conditioning S.H.W. 50 Hz OPERATING LIMITS Flow rates up to: /h Head up to: Max. discharge pressure: bar up to + C bar up to + C Teperature range: to + C Max. abient teperature: + C Flanges ND: to DIE TWIN HEAD PUMPS IN-LINE ELECTRONIC

More information

MC4. Submersible pumps

MC4. Submersible pumps MC4 Subersible pups Sewage water Civil use Industrial use PERFORMANCE RANGE Flow rate up to 2600 l/in (16 3 /h) Head up to 16 APPLICATION LIMITS axiu iersion depth (with a sufficiently long power cable)

More information

BULLETIN 350A. Sethco FLOWS TO 225 GPM. Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer

BULLETIN 350A. Sethco FLOWS TO 225 GPM. Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer BULLETIN 350A FLOWS TO 225 GPM Sethco Seal-less, Self Priming, Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO CORROSION RESISTANT SELF PRIMING MAGNETIC-DRIVE, SEAL-LESS

More information

AUE, AUD, AUED. UNI-EN fire-fighting systems

AUE, AUD, AUED. UNI-EN fire-fighting systems 58 AUE 11 UNI-EN 12845 units with 1 N series electric ain pup AUE 21 UNI-EN 12845 units with 2 N series electric ain pups AUD 11 UNI-EN 12845 units with 1 N series ain pup (diesel otor) AUED 21 UNI-EN

More information

Series P Series P. Penguin Vertical Pump

Series P Series P. Penguin Vertical Pump Features: Choice of CPVC, PVDF, or Polypropylene Sealless Runs Dry Without Damage Self-Priming When Immersed No Metal Contact Chemical Resistant Extended Pump Lengths Available (See Bulletin 1) Recommended

More information

BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer

BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer BULLETIN 340B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS

More information

NM, NMS 60 Hz NM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions.

NM, NMS 60 Hz NM, NMS. Close Coupled Centrifugal Pumps with flanged connections. Construction. Applications. Operating conditions. , S z lose oupled entrifugal ups Materials oponents, S, S up casing ast iron ronze Lantern bracket asing cover for S GJL N Gu Sn N Lantern bracket S ast iron GJL N Ipeller ast iron ronze GJL N Gu Sn N

More information

IWAKI. M Series - Chemical Process Pumps. Non-Metallic, Sealless, Corrosion Resistant, Leak Free. Standard Product Capabilities.

IWAKI. M Series - Chemical Process Pumps. Non-Metallic, Sealless, Corrosion Resistant, Leak Free. Standard Product Capabilities. Standard Product Capabilities IWAKI Series - Chemical Process Pumps Non-etallic, Sealless, Corrosion Resistant, Leak Free 2 YEAR WARRANTY D Series ANSI Dimensional for ease of installation D Series is

More information

VERTICAL MULTISTAGE CANNED PUMP

VERTICAL MULTISTAGE CANNED PUMP VERTICAL ULTISTAGE CANNED PUP Low NPSH Application, Condensate and General Industrial Services CS2510EK odels / API 610 API 682 odel odel VERTICAL ULTISTAGE CANNED PUP Low NPSH Application, Condensate

More information

Submersible Sewage Pumps

Submersible Sewage Pumps Subersible Sewage Pups Printed on a recycled paper with soy ink - evidence of our coitent to the environent enities fro Technology for People and The Earth Featuring a vortex ipeller recessed in the widely

More information

Magnetic drive pumps MX series

Magnetic drive pumps MX series CATE 62 Magnetic drive pups MX series Withstands difficult operating conditions and offers high efficiency The MX Series represents the latest state of the art design in plastic agnetic drive pups. With

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin E4 July E4/T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 6 Feet Temperatures to F MTH E4/T4 Series Close-coupled and pedestal mounted regenerative turbine pumps represent the

More information

Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last

Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM

More information

BM14200 Roller Brake Tester

BM14200 Roller Brake Tester BM14200 Roller Brake Tester The perfect choice if you are looking for... Roller Brake Tester designed to last. The ost coprehensive Load Siulation Syste Progra and EBS Diagnosing tool. Roller Brake Tester

More information

VXC4 VORTEX. Submersible pumps. PERFORMANCE RANGE Flow rate up to 2200 l/min (132 m3/h) Head up to 12.2 m

VXC4 VORTEX. Submersible pumps. PERFORMANCE RANGE Flow rate up to 2200 l/min (132 m3/h) Head up to 12.2 m VXC4 Subersible pups VORTEX Sewage water Civil use Industrial use PERFORMANCE RANGE Flow rate up to 2200 l/in (132 3/h) Head up to 12.2 APPLICATION LIMITS axiu iersion depth (with a sufficiently long power

More information

MICROPUMP MAG-DRIVE GEAR PUMPS

MICROPUMP MAG-DRIVE GEAR PUMPS MAG-DRIVE GEAR PUMPS REVISION # 1 DATE: 6-6-6 WETTED MATERIALS Pump housings: 316 stainless steel. Gears: PEEK. Gear shafts: 316 stainless steel. Gear shaft bearings: PEEK. Driven magnet: Totally encapsulated

More information

Models 9202C, 9203C, 9252C-C, and 9253C-C

Models 9202C, 9203C, 9252C-C, and 9253C-C Models 0C, 03C, C-C, and 3C-C 3 0 3 consists of () Ref. O-ring, () Ref. Mechanical Seal (Viton) and () Ref. Gasket. NOTE: When ordering parts, give quantity, part number, decription, and complete model

More information

Process Equipment. Air-Operated Pumps for Process Industries

Process Equipment. Air-Operated Pumps for Process Industries Process Equipment Air-Operated s for Process Industries Superior ing Technology 55 Gallon Drum Transfer and Supply from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine

More information

Ink Manufacturing and Printing Solutions

Ink Manufacturing and Printing Solutions Ink Manufacturing and Printing Solutions Solutions for pail, drum, or bulk tank ink applications Springer Pumps, LLC Tel: 866-777-6060 Fax: 866-777-6383 INFO@springerpumps.com Leading The Way In Quality

More information

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560 Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;

More information

INDUSTRIAL PRODUCTS 2010 CATALOG

INDUSTRIAL PRODUCTS 2010 CATALOG has a new name SHURflo Industrial INDUSTRIAL PRODUCTS 2010 CATALOG Pumps: Centrifugal Gear Roller Flexible Impeller Effective: 1/1/2010 has a new name SHURflo Industrial The SHURflo product line is a world

More information

High Capacity Centrifugal & Sprinkler Pumps

High Capacity Centrifugal & Sprinkler Pumps High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to

More information

JE1, JE1 4 SERIES CONTENTS: Stainless Steel Construction Closed impeller Flow: 8 to 95 GPM Head: to 144 ft. Range of HP: to 3 HP

JE1, JE1 4 SERIES CONTENTS: Stainless Steel Construction Closed impeller Flow: 8 to 95 GPM Head: to 144 ft. Range of HP: to 3 HP JE, JE SERIES Stainless Steel Construction Closed impeller Flow: 8 to 9 GP Head: to ft. Range of HP: to 3 HP Applications: Residential booster system Irrigation Utility NSF / Annex G Certified* Certified

More information

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) Series: G5-1¼, G6-1¼ 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3 LPS) HEADS TO 9 FEET (8 M) USA: (937) 778-8947 Canada: (905) 457-63

More information

BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer

BULLETIN 340B. Sethco FLOWS TO 275 GPM. Seal-less, End Suction Magnetic Drive Centrifugal Pumps. For Corrosive Liquid and Chemical Transfer BULLETIN 34B FLOWS TO 275 GPM Sethco Seal-less, End Suction Magnetic Drive Centrifugal Pumps For Corrosive Liquid and Chemical Transfer SETHCO END SUCTION CORROSION RESISTANT MAGNETIC DRIVE, SEAL-LESS

More information

Parts and Accessories

Parts and Accessories Parts and Accessories For a full list of available pressure washer parts and accessories, visit www.landa.com. 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Hypro

More information

Photo-voltaic system design and lab. Solar Panels. SP.721 (D-Lab) Fall 2004 Session #23 notes

Photo-voltaic system design and lab. Solar Panels. SP.721 (D-Lab) Fall 2004 Session #23 notes SP.71 (D-Lab) Fall 004 Session #3 notes Photo-voltaic syste design and lab Guest Speaker Dr. Ji Bales, MIT; Assistant Director of the Edgerton Center. Background: PhD at MIT in experiental solid state

More information

CDU. Model CDU Contents. EBARA Stainless Steel Centrifugal Pumps

CDU. Model CDU Contents. EBARA Stainless Steel Centrifugal Pumps odel Contents Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions 7/-3/HP 7/3- /HP 7/-HP /-HP /3- /HP 3 3 /-3HP /- /HP /3-3HP /-3HP *Note: NSF/ANSI Annex G listed Certified

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM

More information

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS

HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel

More information

Seri e s C ATA L O G. Series 526. The Safety Va l v e

Seri e s C ATA L O G. Series 526. The Safety Va l v e API Seri e s Series 526 C ATA L O G The Safety Va l v e Type 526 Type 526 Balanced bellows design Type 526 Plain lever 3 Type 526 Open bonnet d Safety Relief s API Series Contents Contents Applications

More information

145.2 ENGLISH. Courtesy of Crane.Market

145.2 ENGLISH. Courtesy of Crane.Market 5. ENGLISH Standards Optionals Hexagonal profile boos "STAND UP OPERATOR" platfor Rack rotation Swing-up stabilizers, hydraulically activated ETL (Effer Twin Links) Winch Sequence valve Crane adjustent

More information

SERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WG6-2 SELF-PRIMING CENTRIFUGAL PUMPS 420 Third Street Piqua, Ohio 436-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WG6-2 SECTION 4A PAGE ISSUED 2/03 REPLACES 2/0 SELF-PRIMING CENTRIFUGAL PUMPS 300RPM -

More information

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) Series: G5-1¼, G6-1¼ C A L L 1-866 -670-0533 O R D E R O N L IN E www.burkspumpcatalog.com 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 2900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3

More information

ips Selection of materials PVC-U: Unplasticised Polyvinyl Chloride General properties of PVC-U

ips Selection of materials PVC-U: Unplasticised Polyvinyl Chloride General properties of PVC-U Selection of aterials Unplasticised Polyvinylchloride (PVC-U) is one of the oldest and ost widely used plastics for piping systes worldwide. It is a highly versatile aterial that is used for both pressure

More information

2/3/4 NKVE MCE/P CONSTANT PRESSURE SETS WITH MCE/P MULTI INVERTER SYSTEM ON THE PUMP TECHNICAL DATA

2/3/4 NKVE MCE/P CONSTANT PRESSURE SETS WITH MCE/P MULTI INVERTER SYSTEM ON THE PUMP TECHNICAL DATA MCE/ GE 167 2/3/4 NKVE 1-15 - 2-32 - 45 MCE/ CONSTNT RESSURE SETS WIT MCE/ MULTI INVERTER SYSTEM ON TE UM TECNICL DT Line voltage: 4V three phase Voltage of electric pup: 4V three phase ower frequency:

More information

DEWATERING SOLUTIONS. Centrifugal diesel open frame pumps

DEWATERING SOLUTIONS. Centrifugal diesel open frame pumps DEWATERING SOLUTIONS Centrifugal diesel open frae pups DEWATERING SOLUTIONS The PAS range was developed as a result of our over 1 years experience working with construction custoers across the world. Our

More information

KoolAir PM500. Fully Submersible. Marine Coolant Pump. Pump Features:

KoolAir PM500. Fully Submersible. Marine Coolant Pump. Pump Features: KoolAir PM500 Marine Coolant Pump Fully Submersible Pump Features: n Pumps 500 gallons/hr n Run Dry and Thermal Overload Protection n In a Run Dry scenario, the pump will shut down. Simply let it cool

More information

ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.

ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps. ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials

More information

1/2/3 KV PRESSURE BOOSTER SETS WITH ONE VERTICAL PUMP TECHNICAL DATA

1/2/3 KV PRESSURE BOOSTER SETS WITH ONE VERTICAL PUMP TECHNICAL DATA 1/2/3 KV 3-6-1 BOOSTER SETS WIT ONE VERTICL UM TECNICL DT Operating range: fro 1,8 to 43 uped liquid: clean, free of solids and abrasives, non viscous, non aggressive, non crystallised and cheically neutral,

More information

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance

More information

12 Volt DC Diaphragm Pumps Series 400

12 Volt DC Diaphragm Pumps Series 400 Page 1 of 6 12 Volt DC Diaphragm Pumps Series 400 More Information Index Description of Included Models Safety Listings Available Options Accessories Performance Flow Curve Fluid Compatibility Dimensions

More information

SECTION THREE REELS. Heavy Duty Severe Duty Narrow Double Post High Capacity Large Capacity Shielded Specialty Accessories.

SECTION THREE REELS. Heavy Duty Severe Duty Narrow Double Post High Capacity Large Capacity Shielded Specialty Accessories. Heavy Duty Severe Duty Narrow Double Post High Capacity Large Capacity Shielded Specialty Accessories 48 Aleite Product Catalog Aleite reels are the standard for quality and durability the lubrication

More information

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates

More information

Regenerative Turbine Pumps

Regenerative Turbine Pumps Bulletin T June 04 T E Series Regenerative Turbine Pumps Capacities to 40 GPM Heads to 700 Feet Temperatures to 00 F MTH PUMPS MTH T E Series Close-coupled and pedestal mounted regenerative turbine pumps

More information

Optional Items. hyundai heavy industries. Electric Reach Trucks

Optional Items. hyundai heavy industries. Electric Reach Trucks Optional Ites. Fork () 1/13/15/BR-9 : 75 / / 15 / / 135 / 1 2/ : / / / 135 / 1 / 15 / 3BR-9 (Hook) : / 5 / / 135 / 1 / 15 / / 2. Sideshift. Carriage (Shaft type). Carriage (Narrow, Hook type). Tire 1/13/15/BR-9

More information

Alloy version available please call for specifications.

Alloy version available please call for specifications. Alloy version available please call for specifications. 2 SEAL-LESS MAG-DRIVE PUMP SPECIALISTS From WARRENDER, Ltd. - The Leader in Magnetic Drive Pump Technology: 21st Century Design, Materials and Engineering.

More information

SP SERIES SELF-PRIMING MAG DRIVE

SP SERIES SELF-PRIMING MAG DRIVE SP SERIES SELF-PRIMING MAG DRIVE spend less time waiting. and more time pumping. year Big on power yet short on energy consumption, the SP Series from Finish Thompson is one of the most versatile and economical

More information

ETHERMA 4-SPEED CIRCULATOR PUMPS

ETHERMA 4-SPEED CIRCULATOR PUMPS -SPEED CIRCULATOR PUMPS -speed circulator pups with otor ounted directly into the pup body. The switch allows to obtain different perforance curves guaranteeing greater flexibility and haroniously satisfying

More information

IMMERSON D SUBMERSIBLE PUMPS - 4 BORE HOLE Serie D - 2 pole - 50 Hz

IMMERSON D SUBMERSIBLE PUMPS - 4 BORE HOLE Serie D - 2 pole - 50 Hz OPERATING LIMITS Flow rates up to: /h Head up to: Max. water teperature: + C Max. sand content: 5 kg/ ND of ports: G / and G IMMERSON D SUBMERSIBLE PUMPS - BORE HOLE Serie D - pole - 5 Hz Stainless Steel

More information

Webster S-Series Vertical Seal-Less Immersible Pumps. Rugged, Non-metallic Chemical Duty Pumps Against a Closed Valve

Webster S-Series Vertical Seal-Less Immersible Pumps. Rugged, Non-metallic Chemical Duty Pumps Against a Closed Valve Webster S-Series Vertical Seal-Less Immersible Pumps Rugged, Non-metallic Chemical Duty Pumps Against a Closed Valve Reduce Unscheduled Downtime The S-Series vertical pump is the pump to choose when unscheduled

More information

TIER 3 ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E175C 96 kw hp Kg 0.24 m m 3

TIER 3 ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E175C 96 kw hp Kg 0.24 m m 3 TIER 3 ENGINE POWER MAX OPERATING WEIGHT BUCKET CAPACITY E175C 96 kw - 129 hp 18720 Kg 0.24 3-0.90 3 AS LONG AS WE KEEP BUILDING ROADS, THER MORE PRODUCTIVITY The hydraulic syste axiizes perforance according

More information

MATERIALS ORIENTATION OF THE SUCTION AND DELIVERY CONNECTORS:

MATERIALS ORIENTATION OF THE SUCTION AND DELIVERY CONNECTORS: KV 3-6-1 MULTISTAGE VERTICAL CENTRIFUGAL ELECTRIC PUMPS WIT COUPLING TECNICAL DATA Operating range: fro 1,8 to 13,5 3 /h with head up to 139 etres. Puped liquid: clean, free of solids and abrasives, non-viscous,

More information

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support

Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135

More information

PENGUIN. Magnetic Drive Pump. Series M INTRODUCTION RECOMMENDATIONS ELECTRICAL PLUMBING. Installation & Maintenance

PENGUIN. Magnetic Drive Pump. Series M INTRODUCTION RECOMMENDATIONS ELECTRICAL PLUMBING. Installation & Maintenance PENGUIN Installation & Maintenance Magnetic Drive Pump Series M MODELS M-1/14 M-1/8 M-1/4 M-1/3 M-1/2 M-3/4 M-2 M-3 M-10 MATERIALS B - Polypropylene C - PVDF (Kynar) S - 316 Stainless Steel INTRODUCTION

More information

D/G-12 Series. Up to 8 gpm (30.3 l/min)

D/G-12 Series. Up to 8 gpm (30.3 l/min) D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell

More information

SPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E175C 96 kw hp Kg 0.24 m m 3

SPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E175C 96 kw hp Kg 0.24 m m 3 SPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY E175C 96 kw - 129 hp 19180 Kg 0.24 3-0.90 3 E175C MORE PRODUCTIVITY Tier 4 interi engine and SCR technology, which optiizes cobustion,

More information

SPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E195C 96 kw hp Kg 0.24 m m 3

SPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY. E195C 96 kw hp Kg 0.24 m m 3 SPEC SHEET NET FLYWHEEL POWER MAX OPERATING WEIGHT BUCKET CAPACITY E195C 9 kw - 129 hp 20400 Kg 0.24 3-0.90 3 MORE PRODUCTIVITY Tier 4 interi engine and SCR technology, which optiizes cobustion, deliver

More information

ENERGY EFFICIENT MRV III-C. Aviation noise reduction patent fan design. DC fan motor DC inverter technology High efficiency Low noise

ENERGY EFFICIENT MRV III-C. Aviation noise reduction patent fan design. DC fan motor DC inverter technology High efficiency Low noise MRVIII-C Special Heat Exchanger Design 1 New fan with aviation design viation noise reduction patent fan design Strealine vortex fan, sharp fan blade edge, and a certain degree of curvature, reduce the

More information

REPAIR SEALS AND OPTIONS

REPAIR SEALS AND OPTIONS Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS

SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS 40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and

More information

Red Rooster Air Winches 0,2-3,5 tonnes

Red Rooster Air Winches 0,2-3,5 tonnes Red Rooster Winches 0,2-3,5 tonnes RED ROOSTER AIR WINCHES ARE CUSTOM MADE PRODUCTS www.rai-yokota.co Choosing a winch Many constructions are possible, and there are any nors and selection criteria for

More information

SERIES CS CLOSE COUPLED TURBINE PUMPS

SERIES CS CLOSE COUPLED TURBINE PUMPS PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.

More information

M50 L50 Series Multistage Regenerative Turbine Pumps

M50 L50 Series Multistage Regenerative Turbine Pumps Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal

More information

08 general Purpose Pumps

08 general Purpose Pumps 070 08 general Purpose Pumps InTRODuCTIOn Ballast Pumps Today s Wakeboard and Ski tow boats need to be able to take on water ballast to modify their wake formation. A development of our tried and tested

More information

SHURflo Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron

SHURflo Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

S Series PACER Pumps. PACER Pumps 5/91 Page 1 of 5. Dultmeier Sales for Omaha, NE or for Davenport, IA

S Series PACER Pumps. PACER Pumps 5/91 Page 1 of 5. Dultmeier Sales for Omaha, NE or for Davenport, IA PACER Pumps 5/91 Page 1 of 5 Item# Part No. Description Qty. 4 58-0721 NUT, BODY, Plated steel, 1/4-20 Hex... 10 58-0721 10 NUT, BODY, Stainless steel, 1/4-20 Hex... 10 6 58-0703 30 Bracket, polyester...

More information

INSTALLATION INSTRUCTIONS UNDER CABINET HOOD

INSTALLATION INSTRUCTIONS UNDER CABINET HOOD Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS UNDER CABINET HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING

More information

SKD A Page: 1. Rev ision no Product description. SAER Elettropompe spa

SKD A Page: 1. Rev ision no Product description. SAER Elettropompe spa Product description Receiver Fro Ite Quant. Description SERIES SKD AXIAL SPLIT CASING PUMP /in USES Recircling plants, heating, air conditioning, heat recov ery, plants of water supply procureent, pressurising

More information

D51 D61 D71 D91 Series

D51 D61 D71 D91 Series MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications

More information

SERIES CS CLOSE COUPLED TURBINE PUMPS

SERIES CS CLOSE COUPLED TURBINE PUMPS PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD

More information

Purifying Moving Designing Vitalising Lighting Laying. Pumps

Purifying Moving Designing Vitalising Lighting Laying. Pumps Purifying Moving Designing Vitalising Lighting Laying Pups Prograe and technical specifications 2018 Every water project relies on the circulation pup; without a pup, everything coes to a standstill. Whether

More information

Concept Air Seeding & Tillage System

Concept Air Seeding & Tillage System Concept 2000 Air Seeding & Tillage Syste Flexibility and contourability is a tradeark of Morris floating frae design featuring independent wing sections. Floating frae sections, with a tricycle suspension

More information

H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs

H/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25

More information