SPECIFICATION DATA. 200 SERIES MOTORIZED 203, 204, 205 and 220 MODELS
|
|
- Roland Campbell
- 6 years ago
- Views:
Transcription
1 Section: Page: 1 of 2 Date: March 30, 1996 SPECIFICATION DATA 200 SERIES MOTORIZED 203, 204, 205 and 220 MODELS PORT SIZES MODELS SUCTION DISCHARGE All dimensions are in inches. Specifications subject to change without notice ,22051* 5/8 5/ , 20452, 20552, 22052** 3/8 1/4 *Phenolic construction clamped hose connections **Stainless steel construction threaded connections (NPT) MATERIALS OF CONSTRUCTION MODELS COMPONENT 20551,22051* 20352, , 22052** Housing Rotor Stator Phenolic Phenolic Motor Data 1/8 HP, 1 PH, 115 VAC, 50/60 HZ, 1725 RPM Weight (Ibs) SS 316 SS
2 Page 2 of 2 PERFORMANCE (Water at 70 F) P r i n t e d i n U. S. A. 3 M P P I by Moyno, Inc. Printed in U.S.A Moyno is a registered trademark of Moyno, Inc.
3 Section: Page 1 of 2 Date: March SPECIFICATION DATA 200 SERIES 203, 204, 205, 220, AND 232 MODELS DIMENSIONS PORT SIZES MODELS CP F 1 F 2 SUCTION DISCHARGE 20501, / / / 8 3 / 8 NPT 20302, 20402, 20502, / / / 8 3 / 8 NPT 23201, / / / 2 1 / 2 NPT 3 / 8 NPT 3 / 8 NPT 1 / 2 NPT All dimensions are in inches. Specifications subject to change without notice. MATERIALS OF CONSTRUCTION COMPONENT Housing Rotor Stator MODELS 20501, , 20402, 20502, Aluminum 316 SS Aluminum 316 SS Phenolic 316 SS 416 SS/CP* 316 SSICP* Weight (Ibs) *CP =Chrome plated
4 Page 2 of 2 PERFORMANCE (Water at 70 F) 1999 by Moyno, Inc. Moyno is a registered trademark of Moyno, Inc. Printed in U.S.A.
5 Section: Page: 1 of 4 Date: March 30, 1996 SPECIFICATION DATA 300 SERIES MOTORIZED 331, 332, 333, 344, 356 AND 367 MODELS 331, 332, 333, 344 MODELS DIMENSIONS MATERIALS OF CONSTRUCTION COMPONENT 33159, , , , MODELS 33152, , , , Housing Cast iron Cast iron 316SS 316SS Rotor 416 SS/CP 416 SS/CP 316 SS/CP 316 SS/CP Stator 1/2 HP,1 PH 1/2 HP, 3 PH 1/2 HP, 1 PH 1/2 HP, 3 PH Motor Data 115/230 VAC 230/440 VAC 115/230 VAC 230/440 VAC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC Weight (Ibs) CP = Chrome plated
6 Page 2 of 4 PERFORMANCE (Water at 70 F) NOTE: With the standard 1/2 HP motor, maximum fluid viscosity is 100 CP (500 SSU).
7 Page 3 of AND 367 MODELS DIMENSIONS All dimensions are in inches. Specifications subject to change without notice. MATERIALS OF CONSTRUCTION COMPONENT MODELS Housing Rotor Stator Cast iron 416 SS/CP Cast iron 416 SS/CP 316 SS 316 SS/CP 316 SS 316 SS/CP 316 SS 316 SS/CP 316 SS 316 SS/CP 1-1/2 HP, 3 PH 2 HP, 3 PH 1-1/2 HP, 3 PH 1-1/2 HP, 1 PH 2HP, 3 PH 2 HP, 1 PH Motor Data 208/230/440 VAC 230/440 VAC 230/460 VAC 115/230 VAC 230/460 VAC 115/230 VAC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC 60 HZ TEFC Weight (Ibs) CP = Chrome plated
8 Page 4 of 4 PERFORMANCE (Water at 70 F) NOTE: With the standard 1 ½ HP (Model 35651) 2 HP (Model 36751) motor, maximum fluid viscosity is 100 CP (500 SSU) by Moyno, Inc. Printed in U.S.A. Moyno is a registered trademark of Moyno, Inc.
9 Section: Page:1 of 4 Date: March 30, 1996 SPECIFICATION DATA 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS MODELS CP A A 1 D E F F 1 H K L M N R U X Y 33101, , , / / / / / / / / / / / 16 5 / / / 4 3 / 4 3 / , * / / / / / / / / / / 8 1 / 4 5 / / / 4 3 / 4 3 / , / / / / / /32 13 / / / / / 8 15 / 32 3 / / / / / 4 *35611, * / / / / / / /32 / / / / 9 32 / 3 16 / / / / / , / / / / / / / / / / *Packing Gland Model SUCT (NPT) DISCH (NPT) All dimensions are in inches. Specifications subject to change without notice.
10 2 331, 332, 333 and 344 MODELS PERFORMANCE (water at 70ºF) NOTE: For fluids with viscosity over 200 CP (1000 SSU), pump capacity is reduced by 20%. MATERIALS OF CONSTRUCTION COMPONENT 33101, , Housing Rotor Stator Cast iron 416 SS/CP 33104, , SS 316 SS/CP MODELS 33108, , Nylon 416 SS/CP *34411 Cast iron 416 SS/CP Weight (Ibs) * Packing Gland Model CP = Chrome plated
11 NOTE: For fluids with viscosity over 200 CP (1000 SSU), pump capacity is reduced by 20%. 3
12 356 and 367 MODELS PERFORMANCE (water at 70 F) NOTE: For fluids with viscosity over 200 CP (1,000 SSU), pump capacity is reduced by 20%. MATERIALS OF CONSTRUCTION COMPONENT Housing Rotor Stator MODELS 35601, , Cast iron 316 SS Cast iron 316 SS 416 SS/CP 316 SS/CP 416 SS/CP 316 SS/CP Weight (Ibs) CP=Chrome plated 1999 by Moyno, Inc. Moyno is a registered trademark of Moyno, Inc. Printed in U.S.A.
13 SPECIFICATION DATA 300 SERIES MODELS 30100, 30102, 30104, Section: Page: 1 of 2 Date: November 1, 1994 All dimensions are in inches. Specifications subject to change without notice. MATERIALS OF CONSTRUCTION COMPONENT Housing Rotor Stator MODELS 30100, Phenolic Phenolic *NBR Phenolic Phenolic *EPDM Weight (Ibs) *NBR = Nitrile EPDM = Ethylene-Propylene-Diene Terpolymer FPM = Fluoroelastomer Phenolic Phenolic *FPM
14 Page 2 of 2 PERFORMANCE (Water at 70 F) NOTE:For fluids with viscosity over 200 CP (1000 SSU), pump capacity is reduced by 20% by Moyno, Inc. Moyno is a registered trademark of Moyno, Inc. Printed in U.S.A.
15 Section: Page: 1 of 2 Date: November 1, 1994 SPECIFICATION DATA 400 SERIES GRINDER PUMPS 415, 422, 433, AND 444 MODELS PERFORMANCE (1 HP, 1725 RPM, water at 70 F) DISCHARGE CAPACITY IN GAL. PER MIN. HEAD PRESSURE BY MODEL NUMBER IN FEET (PSIG) NPSHR Ft NOTE: In application other than sewage, maximum fluid viscosity cannot exceed 100 CP (500 SSU). MATERIALS OF CONSTRUCTION Housing... Cast iron Rotor Stainless steel Stator... WEIGHT: Pump only...50 lbs. Pump with motor...90 lbs. (Approx.)
16 Page 2 of SERIES GRINDER PUMPS 1999 by Moyno, Inc. Printed in U.S.A. Moyno is a registered trademark of Moyno, Inc.
17 Section: Page: 1 of 4 Date: November 1, 1994 SPECIFICATION DATA 603, 610, 622, 633, AND 655 MODELS 600 SERIES MODELS CP E 1 F F, F 2 M R SUCT. DISCH. WEIGHT (NPT) (NPT) (LBS.) / / / / / 4 3 / 4 1 / 2 30 * / l6 1 9 / / / / 32 3 / 4 1 / / / / / / / 4 3 / 4 3 / 4 32 * / / / / / / 32 3 / 4 3 / / / / / / / / 4 3 / 4 3 / 4 32 * / / / / / / 32 3 / 4 3 / / / / / / / / / 4 40 * / / / / / / / / / / / / / / / / 4 38 * / / / / / / / / 4 46 *Packing Gland Models. All dimensions are in inches. Specifications subject to change without notice.
18 Page 2 of 4 PERFORMANCE (water at 70 F) MATERIALS OF CONSTRUCTION COMPONENT ALL MODELS Housing Rotor Stator CP = Chrome plated Cast iron 416 SS/CP
19 PERFORMANCE (water at 70 F) (CONT) Page 3 of 4
20 Page 4 of 4 PERFORMANCE (Water at 70 F) (CONT) 1999 by Moyno, Inc. Printed in U.S.A. Moyno is a registered trademark of Moyno, Inc.
21 Section: Moyno 500 PUMPS Page: 1 of 2 Date: September 30, 1996 SPECIFICATION DATA SANITARY/HYGIENIC MOTORIZED 331, 332, 333 AND 344 MODELS DIMENSIONS SUCTION: 1.0 (INCH) STD SANITARY CLAMP-STYLE FITTING 4 X.34 SLOTS 10.26±.25 DEPENDENT ON DRIVE SELECTION 7.43±.12 DISCHARGE: 1.0 (INCH) STD SANITARY CLAMP-STYLE FITTING MATERIALS OF CONSTRUCTION SANITARY MODELS HYGIENIC MODELS COMPONENT 33116, , , , , , , , Housings 316 SS#4 Finish 316 SS#4 Finish 316 SS (Not Polished) 316 SS (Not Polished) Rotor 316 SS/CP 316 SS/CP 316 SS/CP 316 SS/CP Stator Nitrile (FDA Food Grade) Nitrile (FDA Food Grade) NBR (Nitrile STD.) NBR (Nitrile STD.) Motor Data 1/2 HP,1 PH 1/2 HP, 90V 1/2 HP, 1 PH 1/2 HP, 90V 115/230 VAC DC, TENV 115/230 VAC DC, TENV 60 HZ TEFC Washdown Duty 60 HZ TEFC Washdown Duty Weight (lbs) CP=Chrome plated All dimensions are in inches. Specifications subject to change without notice.
22 Page 2 of 2 331, 332, 333 and 344 MODELS PERFORMANCE (Water at 70 F) NOTE: With the standard 1/2 HP motor, maximum fluid viscosity is 100 CP (500 SSU) by Moyno, Inc. Moyno is a registered trademark of Moyno, Inc. Moyno, Inc. is a Unit of Robbins & Myers, Inc.
23 Section: Page: 1 of 2 Date: September 30, 1996 SPECIFICATION DATA SANITARY/HYGIENIC NON-MOTORIZED 331, 332, 333 AND 344 MODELS DIMENSIONS.62 SUCTION: 1.0 (INCH) STD SANITARY CLAMP-STYLE FITTING 13.63± ±.12 DISCHARGE: 1.0 (INCH) STD SANITARY CLAMP-STYLE FITTING X Ø MATERIALS OF CONSTRUCTION COMPONENT SANITARY MODELS 33106, , HYGIENIC MODELS 33107, , Housings 316 SS/#4 Finish 316 SS (Not Polished) Rotor 316 SS/CP 316 SS/CP *Stator Nitrile (FDA Food Grade) Nitrile (STD. NBR) Weight (lbs) CP=Chrome plated *Other Materials Available All dimensions are in inches. Specifications subject to change without notice.
24 Page 2 of 2 331, 332, 333 and 344 MODELS PERFORMANCE (Water at 70 F) MODELS Minimum Starting Torque 15 in.-lbs MODELS Minimum Starting Torque 15 in.-lbs. 100 PSI Horsepower Discharge Pressures 150 PSI 100 PSI 50 PSI 0 PSI Horsepower Discharge Pressures 50 PSI 0 PSI 0 PSI PSI Capacity GPM Discharge Pressures 50 PSI 100 PSI Capacity GPM Discharge Pressures 50 PSI 100 PSI PSI NPSHR Ft RPM 20, ,000 2, VISCOSITY HEAVY MEDIUM LIGHT ABRASION 1.5 NPSHR Ft RPM 20, , VISCOSITY HEAVY MEDIUM LIGHT ABRASION MODELS Minimum Starting Torque 15 in.-lbs. 50 PSI MODELS* Minimum Starting Torque 15 in.-lbs. 40 PSI Horsepower Discharge Pressures 25 PSI 0 PSI Horsepower Discharge Pressures 25 PSI 0 PSI PSI Capacity GPM Discharge Pressures 0 PSI 25 PSI 50 PSI Capacity GPM Discharge Pressures 25 PSI 40 PSI NPSHR Ft RPM 20, , VISCOSITY HEAVY MEDIUM LIGHT ABRASION 2 NPSHR Ft RPM 20, , VISCOSITY HEAVY MEDIUM LIGHT ABRASION 2 NOTE: For fluids with viscosity over 200 CP (1000 SSU), pump capacity is reduced by 20%. *Max. 30 PSI with.5 HP motor. Consult factory for larger motors by Moyno, Inc. Moyno is a registered trademark of Moyno, Inc.
SERVICE MANUAL 200 SERIES MOTORIZED 20352, 20452, 20551, 20552, AND MODELS
Section: MOYNO 500 PUMPS Page:1 of 4 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 200 SERIES MOTORIZED 20352, 20452, 20551, 20552, 22051 AND 22052 MODELS DESIGN FEATURES Housing: AISI 316 stainless
More informationSERVICE MANUAL Moyno Mag Drive Series Motorized Pumps with Magnetic Drives 331, 332, 333, 344 MODELS
SERVICE MANUAL Moyno Mag Drive 500 300 Series Motorized Pumps with Magnetic Drives 331, 332, 333, 344 MODELS Section: Mag Drive 500 Pumps Page: 1 of 4 Date: January 2010 DESIGN FEATURES Housing: PVC or
More informationSANITARY/HYGIENIC NON-MOTORIZED
Section: MOYNO 500 PUMPS Page: 1 of 4 Date: March 2002 SERVICE MANUAL MOYNO 500 PUMPS SANITARY/HYGIENIC NON-MOTORIZED 331, 332, 333 AND 344 MODELS SANITARY MODELS These pumps include housings polished
More informationSERVICE MANUAL 200 SERIES MOTORIZED 20352, 20452, 20551, 20552, AND MODELS
Section: MOYNO 500 PUMPS Page:1 of 4 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 200 SERIES MOTORIZED 20352, 20452, 20551, 20552, 22051 AND 22052 MODELS DESIGN FEATURES Housing: AISI 316 stainless
More information300 SERIES 30100, 30102, 30104, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 4 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 30100, 30102, 30104, AND 30105 MODELS DESIGN FEATURES Housing: Phenolic Pump Rotor: Phenolic Elastomers:
More information200 SERIES 20302, 20402, 20501, 20502, 22001, 22002, 23201, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 4 Date: December 1, 1999 SERVICE MANUAL MOYNO 500 PUMPS 200 SERIES 20302, 20402, 20501, 20502, 22001, 22002, 23201, AND 23203 MODELS DESIGN FEATURES Housing: Stainless
More information300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS
Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES
More informationMETERING/DOSING PUMP CLOSE-COUPLED B4015D, B4050D, B4100D, B4190D, B2400D, AND B4400D MODELS
Section: METERING/DOSING PUMPS Page: 1 of 5 Date: July 2009 SERVICE MANUAL METERING/DOSING PUMP CLOSE-COUPLED B4015D, B4050D, B4100D, B4190D, B2400D, AND B4400D MODELS DESIGN FEATURES Suction Housing:
More informationMODEL 2002 PERISTALTIC PUMPS S E R I E S
MODEL PERISTALTIC PUMPS Features Dry pump cavity Self-priming operation Runs dry without damage Complete isolation of pumped fluid Heavy-duty roller bearings Wide range of pump configurations/flows No
More informationHigh Capacity Centrifugal & Sprinkler Pumps
High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to
More informationVector Peristaltic Pump Operating Principle
Vector Peristaltic Pump Operating Principle Peristaltic pumps work by compressing and relaxing a hose positioned between a rotating device and a circular pump housing. Vector 2 Series pumps use rotating
More informationContinental Progressive Cavity Pump CP Model CP56 Packed Seal Pump
Continental Progressive Cavity Pump CP Model CP56 Packed Seal Pump Continental Pump Company CP Model Number Nomenclature: Materials used in the pumps are based on the fluid to be handled and are indicated
More informationJH Process Equipment Inc. 617 Jeffers Circle, Exton, PA
Progressing Cavity Pumps Setting the Standard for Premium Quality Products If you re pumping viscous, abrasive, shear sensitive, or solids-containing materials... If your process involves extremely thick
More informationITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6" Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems
B65-32L ITT Residential Water Systems Goulds s 65L, 95L, 12L, 16L, 2L, 32L 6" Stainless Steel Submersible s 6 Hz High Capacity For 6" and larger wells Goulds s is a brand of ITT Corporation. www.goulds.com
More informationpump selection guide PONNDORF PX single series PDX single series PD/2 dual series PK series
pump selection guide Pump Pump Max flow rate Dry Lubricated Three Compression Special series m 3 /hr (GPM) running bath roller shoe features Page(s) PX single 12.5 (55) Molded tubing with rib 38-39 and
More informationVector Peristaltic Pump Operating Principle
Vector Peristaltic Pump Operating Principle Peristaltic pumps work by compressing and relaxing a hose positioned between a rotating device and a circular pump housing. Vector 2000 Series pumps use rotating
More informationTECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES
TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing
More informationCDU. Model CDU Contents. EBARA Stainless Steel Centrifugal Pumps
odel Contents Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions 7/-3/HP 7/3- /HP 7/-HP /-HP /3- /HP 3 3 /-3HP /- /HP /3-3HP /-3HP *Note: NSF/ANSI Annex G listed Certified
More informationSingle, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
More informationMOTOR SPEED PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1442 Page 1442.
Page 1442.1 TABLE OF CONTENTS Features & Benefits...2 Standard Materials of Construction...2 Specifications...2 Model Number Key...3 Cutaway View & Pump Features...3 Dimensions C, F, FH Sizes...4 Dimensions
More informationJE1, JE1 4 SERIES CONTENTS: Stainless Steel Construction Closed impeller Flow: 8 to 95 GPM Head: to 144 ft. Range of HP: to 3 HP
JE, JE SERIES Stainless Steel Construction Closed impeller Flow: 8 to 9 GP Head: to ft. Range of HP: to 3 HP Applications: Residential booster system Irrigation Utility NSF / Annex G Certified* Certified
More informationSeries: CT. 4CT RPM - 60Hz. CT RPM - 60Hz. (See Indivdual curves for symbol number)
4CT - 25-60Hz. CT - 450-60Hz. (See Indivdual curves for symbol number) Symbol 2 4 5 6 8 9 0 *MAXIMUM HEAD HP /2 /4 / /2 /4 / /2 /4 /4 /2 /4 Catalog - Phase - Phase 5CTM CTM CT6M 5CT6M CT6M CT5M 5CT5M 24CTM
More informationUNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE
SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4
More informationDesigned to Handle Difficult Fluids
Designed to Handle Difficult Fluids For Processing Applications with Difficult Fluids Contents Page Introduction...3 Capabilities Overview Flow Capacities & Pressure Ratings...4 Maximum Allowable Solids
More informationMAX FLUID TEMPERATURE
Operation is similar to standard centrifugal pumps, except the impeller is driven with a magnetic coupling, eliminating the need for a shaft seal. Magnetic drive pumps must be used where flooded suction
More informationHIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS
HIGH CAPACITY CENTRIFUGAL & SPRINKLER PUMPS FW0724 0707 Supersedes 1005 Straight Centrifugal Pumps Electric Motors Heavy Duty Straight Centrifugal Pumps High Head Straight Centrifugal Pumps Stainless Steel
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD
More informationEngineering Data Pack GlobalGear Series Pump US
Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral
More informationSingle, oversized roller compresses a low friction hose through a full 360-degrees of rotation
Graco EP Series Peristaltic Hose Pump Technology Single, oversized roller compresses a low friction hose through a full 360-degrees of rotation More flow per revolution than conventional designs Inexpensive
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationNDP-25 Specifications
NDP-25 Specifications Port Dimensions (46.2 GPM Max.) Intake & discharge connection: Polypropylene (PPG) Kynar (PVDF) Aluminum (ADC-12) Stainless Steel (316) Cast Iron Air inlet (incl. ball valve): Air
More informationTrash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
More informationUse Type C control units. Viscosity range is 100 to 10,000 SSU at operating temperature. See Bijur Engineering Manual for system limitations.
V5W Lubricator Automatic Continuous Operation The V5W Lubricator consists of a motor-driven gear pump, with a controlled bypass valve. (constant volume or constant pressure models) The fully automatic
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More information2CDU70/206-2HP 2CDU70/306-3HP CDU120/306-3HP 2CDU200/506-5HP 607
Model CDX/CDU Contents CDX/CDU Item No. Specifications Selection Performance Pump Sectional Motor Chart Curve Dimensions View Data CDXU70/06-HP CDXU70/6-HP 5 6 8 6 CDXU0/6-HP CDXU00/6-5HP 7 CDU70/06-HP
More informationSERIES CS CLOSE COUPLED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.
More informationDATA SHEET 6K151CT2, 6K151CT4, 6K201CT2, 6K201CT4, 6K301CT4, 6K401CT4 OPEN IMPELLER CENTRIFUGAL PUMPS. Stainless Steel Models: SPECIFICATIONS FEATURES
DATA SHEET OPEN IMPELLER CENTRIFUGAL PUMPS Stainless Steel Models: 6K151CT2, 6K151CT4, 6K1CT2, 6K1CT4, 6K31CT4, 6K1CT4 FEATURES Model 6K1CT2 Shown 34 SS Liquid-end construction offers corrosion resistance
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationEngineering Data Pack C Series and 4300 Series Pumps
Engineering Data Pack Series and 4300 Series Pumps Excellence at work. Excellence in life. Table of ontents Product Overview 3 2F Features 3 2E Features 3 2B/4310 Features 3 K2B Features 3 2FA Features
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance
More informationD/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
More informationSeries. NV Vertical Multistage Booster Pump
NV Vertical Multistage Booster Pump Series This series of vertical multistage booster pumps offer technically advanced designs to meet market demands including hot water applications. Every NV Series pump
More informationFlow Range Horsepower Best Eff. Discharge Minimum Rotation➀ GPM Range GPM Connection Well Size 5LS " CCW " CCW
6 Hz LS EXTENSION 4" Submersible Pumps MODEL LS 5LS, 7LS, LS, LS, 8LS, 25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor
More informationSeries: GNA5-1-1/4, GNA6-1-1/4
1750 RPM - 60Hz. CAPACITIES TO 40 GPM (2.5 LPS) HEADS TO 0 FEET (9 m) USA: (97) 778-8947 Canada: (905) 457-622 International: (97) 615-598 1 500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 15 FEET
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
More informationAMERICAN STAINLESS PUMPS STAINLESS STEEL PUMPS FOR THE COMMERCIAL MARKETPLACE
FSP CENTRIFUGAL PUMP AMERICAN STAINLESS PUMPS STAINLESS STEEL PUMPS FOR THE COMMERCIAL MARKETPLACE FSP CENTRIFUGAL PUMP Flow Rates up to gpm System pressures up to psig Temperatures up to 2 F Impellers
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G5--/4 G6--/4 SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 500RPM
More informationDimensions: 48 Wide x 96 Long x 88 Tall (with exhaust stack), 1,445 pounds
Enviro-Equipment Inc. 10120 Industrial Drive Pineville NC 28134 Stock#: EEI-1313 Status: In Stock, Tested Dimensions: 48 Wide x 96 Long x 88 Tall (with exhaust stack), 1,445 pounds Description: Soil Vapor
More informationITT. Goulds Pumps. Marlow Series Trash Hog II. Engineered for life. Wastewater. Self-Priming Solids Handling Centrifugal Pumps
Goulds Pumps Marlow Series Trash Hog II Self-Priming Solids Handling Centrifugal Pumps Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life TRASH HOG II A FULL RANGE OF PRODUCT
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP The Heavy Duty S-Series pumps are designed to handle a wide variety of liquids and are particularly suitable for bulk transfer applications where long life and dependable service is required.
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/g-25 hydra-cell diaphragm pump. H/G-25 Specialized Designs
H/g-25 hydra-cell diaphragm pump H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationSubmersible Turbine Pumps
Submersible Turbine Pumps FW54 62 Supersedes NEW 5 to GPM For 5, 6, 7 and 8 inch wells High capacity submersible pumps for commercial, industrial, agricultural, municipal and other deep well, large water
More informationkythe Premium Pump LKH Centrifugal Pump
. kythe Premium Pump ky LKH Centrifugal Pump Applications The LKH pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationVIKING SPUR GEAR SINGLE PUMPS SERIES SG-04, SG-05, SG-07 AND SGN-05, SGN-07 STANDARD CONSTRUCTION FEATURES
VIKING SPUR GEAR SINGLE PUMPS FEATURES Section 34 Page 34. SERIES SG-04 and SG-05 Pumps Cutaway View.0 to.2 GPM Sizes (.0 to 2.5 m³/hr) SERIES SG-07 Pump Cutaway View 2.8 to 32.0 GPM Sizes (. to 7 m³/hr)
More information5" Submersible Turbine Pump 120 GPM
5" Submersible Turbine Pump 120 GPM Submersible Turbine Pumps Features: n 100% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More information5" Submersible Turbine Pump 220 GPM
5" Submersible Turbine Pump 220 GPM Submersible Turbine Pumps Features: n 00% Franklin Electric factory wet tested with test results shipped with each pump n Premium ductile iron casting for longer life
More informationD/G-35 Series. Up to 37gpm (140 l/min) D/g-35 hydra-cell diaphragm pump. D/G-35 Specialized Designs
D/g-35 hydra-cell diaphragm pump D/G-35 Series Up to 37gpm (14 l/min) D/G-35 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for
More informationTrash Hog II Self Priming Solids Handling Centrifugal Pumps
Trash Hog II Self Priming Solids Handling Centrifugal Pumps Marlow Pumps ITT Industries Trash Hog II A Full Range of Product Features Industrial Duty Power End Provides rigid shaft support. Ample oil
More informationD/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
More information103 bar (1500 psi) for Metallic Pump Heads
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 13 bar (15 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Brass pump head G35
More informationNDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
More informationITT. Goulds Pumps 70L, 90L, 150L, 200L, 300L Stainless Steel 6" Submersible Pumps. Engineered for life. Residential Water Systems. 60 Hz High Capacity
Goulds Pumps 7L, 9L, 15L, 2L, 3L Stainless Steel 6" Submersible Pumps 6 Hz High Capacity For 6" and larger wells Goulds Pumps is a brand of ITT Residential and Commercial Water. www.goulds.com Engineered
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More informationG35 Series API bar (1500 psi) for Metallic Pump Heads. G35 with Stainless Steel pump head and SAE flanges. G35 with Brass pump head
G35 Series Maximum Flow Rate: Maximum Pressure: 138 l/min (36.5 gpm) 103 bar (1500 psi) for Metallic Pump Heads API 674 ATEX G35 with Stainless Steel pump head and SAE flanges G35 with Cast Iron pump head
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
More information100H, 150H, 225H, 275H
TECHNICAL BROCHURE B1-275H 1H, 15H, 2H, 275H 6 HZ HIGH CAPACITY 6" SUBMERSIBLE PUMPS FOR 6" AND LARGER WELLS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the
More informationITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.
ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials
More informationItem No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions
Model CDU, Contents CDU, Item No. Specifications Selection Performance Pump Sectional View Chart Curve Dimensions CDU70/1-3/4HP CDU70/3-1 1 /2HP CDU70/5-2HP CDU120/1-1HP CDU120/3-1 1 /2HP 3 5, 311 6 311
More informationTECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing
More informationPOMPE À ENGRENAGES GEAR PUMP ASYBCO
POMPE À ENGRENAGES GEAR PUMP ASYBCO GEAR PUMP Series 5 Canadian General Purpose Designed and engineered to serve petroleum, chemical, process and manufacturing industries. GPM (289 L/m) PSI (690 kpa) /2
More informationITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.
ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L
More informationSeries
MTH PUMPS 15 25 26 17 27 Series Flexible Coupled Capacities to 15 GPM Heads to 115 Feet Low NPSH Requirements Page 1-19 15 17 25 26 27 LIMITATIONS Discharge Pressure Seal Pressure* Suction Pressure (Min.)
More information5LS, 7LS, 10LS, 13LS, 18LS & 25LS 5-25 GPM, ½ 1½ HP, 60 HZ, SUBMERSIBLE PUMPS
TECHNICAL BROCHURE B5-25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without
More informationKG(X)3. Grinder Pumps. 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve. Total Head (FT) Capacity (GPM)
Grinder Pumps 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) The KEEN PUMP series centrifugal grinder pumps easily handle residential, commercial or industrial sanitary waste,
More informationMYERS MODELS 4V AND 4VX
MYERS MODELS 4V AND 4VX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4V) AND HAZARDOUS LOCATION (4VX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4V AND 4VX Solids Handling Wastewater Pumps The Right Choice
More informationARC-SB Aseptic Remote Controlled Valve with Steel Bellows
ARC-SB Aseptic Remote Controlled Valve with Steel Bellows ARC-SB is an air-operated valve which is available as a shut-off or divert valve for aseptic installations. The special design and selected material
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More information1SV (e-sv) 60 Hz 3500 RPM
DIMENSIONS AND ENGINEERING PAGE 31 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationDesigned to Handle Difficult Fluids
Designed to Handle Difficult Fluids For Processing Applications with Difficult Fluids Contents Page Introduction...3 Capabilities Overview Flow Capacities & Pressure Ratings...4 Maximum Allowable Solids
More informationF20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
More informationCENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
More informationCLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM
CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM DESCRIPTION Series S pumps are general purpose positive displacement gear pumps and are a good choice
More information69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationSSP. American Stainless Pumps Stainless Steel Pumps for the Commercial Marketplace.
SSP Stainless Steel Open or Enclosed Impellers End Suction Back Pullout Close Coupled High Efficiency Family of Curves 3500 RPM Head in Feet Capacity - Gallons Per Minute Applications Dishwashing Machines
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More informationSANITARY POSITIVE DISPLACEMENT PUMPS
Capacity to 450 GPM/102 M 3/ hr Pressure to 200 PSI/14 Bar (Model 0450 to 400 PSI/27 Bar) Viscosity to 910,000 SSU (200,000 cps) Temperature -40 to 300 F (-40 to 150 C) SANITARY POSITIVE DISPLACEMENT PUMPS
More information8" Submersible Turbine Pump 450 GPM
8" Submersible Turbine Pump 450 GPM Submersible Turbine Pumps Features Premium ductile iron casting for longer life and higher pressures Longer discharge and motor bracket bearings for increased pump life
More informationSSP. American Stainless Pumps Stainless Steel Pumps for the Commercial Marketplace.
SSP Stainless Steel Open or Enclosed Impellers End Suction Back Pullout Close Coupled High Efficiency Family of Curves 3500 RPM Head in Feet Capacity - Gallons Per Minute Applications Dishwashing Machines
More information3D SERIES. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page
CONTENTS Page - SPECIFICATIONS 0 SELECTION CHART 1 TYPE KEY 3 PERFORMANCE CURVE SPECIFICATIONS 4 PERFORMANCE CURVE 32-125 5 PERFORMANCE CURVE 32-6 PERFORMANCE CURVE 32-0 7 PERFORMANCE CURVE 40-125 8 PERFORMANCE
More informationEN. 850 Filtrate Pumps. Technical Specification Pages
850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationF/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump
f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with
More information1SV (e-sv) 50 Hz 2900 RPM
DIMENSIONS AND ENGINEERING PAGE 37 CONSTRUCTION: 34 STAINLESS STEEL NOMINAL FLOW: 9 GPM CAPACITIES: 2-12 GALLONS PER MINUTE HEADS: 13 372 PSI TDH STAGING: 2 3 MINIMUM FLOW: 2 GPM MAXIMUM WORKING 36 PSI
More informationMARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS
MARCH PUMPS CENTRIFUGAL MAGNETIC DRIVE PUMPS W W W. M A R C H P U M P. C O M MARCH PUMPS Why a magnetic drive pump? A magnetic drive pump is sealless, preventing any leakage that is normally associated
More informationSD Series. Slurry Duty Pumps. Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to:
SD Series Slurry Duty Pumps Hydra-Cell Slurry Duty pumps are specifically designed for abrasive duty applications in order to: Increase flow Reduce and simplify maintenance Extend pump life Provide quiet
More informationMYERS MODELS 4R AND 4RX
MYERS MODELS 4R AND 4RX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4R) AND HAZARDOUS LOCATION (4RX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4R AND 4RX Solids Handling Wastewater Pumps The Right Choice
More information