PSW SHALLOW WELL 1 ¼" 1" All pumps are tested at our factory PERFORMANCE CHART B-1

Transcription

1 SHALLOW WELL PSW The PSW injection centrifugal shallow well pump is ideal for a house, a summer cottage or a country house. The diffuser (Polycarbonate) and the impeller (Noryl) precisely molded, assure optimum efficiency. The self-lubrificated mechanical seal is made of carbon and ceramic for a longer life span. The pump housing and the seal plate are made of grey close-grained cast iron. These parts are specially treated with adapted paint to give a much better resistance to corrosion. Single-phase motor, square flange, 3450 RPM, 115/230 Volts, automatic thermal protection and "NUTRIDE" shaft Pressure switch set at 30 to 50 lbs/in² PSI pressure gauge 8.25 po (20.8 cm) All pumps are tested at our factory 17 po (43.2 cm) 9.5 po (24.1 cm) Motor Suction inch Discharge inch Shipping weight lbs PSW-50 1/ ¼" 1" PSW-75 3/ PSW PERFORMANCE CHART MODEL MOTOR VENTURI & NOZZLE PSW-50 1/2 287 PSW-75 3/4 307 PSW DISCH. PRESSURE P.S.I. DEPTH OF WATER IN FEET CAPACITY - U.S. GALLONS/HOUR Shut-off PSI B-1

2 REPLACEMENT PARTS PSW # Description MODELS PSW-50 PSW-75 PSW PG B Pressure gauge Brass elbow VT model mechanical seal /2 motor square flange (SF1.6) /4 motor square flange (SF1.0) motor square flange (SF1.0) (13") MV polyethylene tubing PSW Pump body Mechanical seal plate /2 impeller /4 impeller impeller Diffuser /8"-16 X 1 ½" screw (plated) /4"-20 X 7/8" screw (S/S) Square o'ring pump body O'ring diffuser /64" Nozzle /64" Venturi /64" Venturi /64" Venturi /4" NPT brass plug FTG-10TU pressure switch B-2

3 CONVERTIBLE PJC The PJC injection centrifugal pump with convertible ejector is built for either shallow well or deep well applications. It is ideal for a summer cottage or a country house. The diffuser (Polycarbonate) and the impeller (Noryl) precisely molded, assure optimum efficiency. The self-lubrificated mechanical seal is made of carbon and ceramic for a longer life span. The pump housing and the seal plate are made of grey close-grained cast iron. These parts are specially treated with adapted paint to give a much better resistance to corrosion. CHARACTERISTICS Single-phase motor, square flange, 3450 RPM, 115/230 Volts, automatic thermal protection and "NUTRIDE" shaft Rubber seal gasket Pressure switch set at 30 to 50 lbs/in² PSI pressure gauge Shallow well ejector included Deep well venturi included Convertible ejector for deep well application All pumps are tested at our factory Shallow well ejector included + deep well venturi 15 in (38.1 cm) 8 ¼ in (20.8 cm) 9 ½ in (24.1 cm) Order Shallow well ejector included Pump model SHALLOW WELL EJECTOR KITS (included: ejector body, venturi tube, nozzle, ejector gasket, bolts and washers) Motor Venturi Diameter Nozzle Order PJC-7-50S 1/2 29/64 16/ PJC-7-75S 3/4 32/64 16/ PJC-7-100S 1 34/64 16/ Without ejector Pump model Motor PJC-50 1/ PJC-50 1/ PJC-75 3/ PJC-75 3/ PJC PJC B-3

4 MODEL MOTOR VENTURI & NOZZLE PJC-50 1/2 296 PJC-75 3/4 326 PJC MODEL MOTOR PJC-50 1/2 PJC-75 3/4 PJC CONVERTIBLE PJC PERFORMANCE CHART - SHALLOW WELL APPLICATION DISCH. PRESSURE P.S.I. DEPTH OF WATER IN FEET CAPACITY - U.S. GALLONS/HOUR PERFORMANCE CHART - DEEP WELL APPLICATION VENTURI & NOZZLE DISCH. PRESSURE P.S.I DEPTH OF WATER IN FEET DEEP WELL EJECTOR KITS (included: ejector body, venturi tube and nozzle) Diameter Venturi Nozzle AJ37 FP /64 15/ AJ37 FP /64 16/ AJ37 FP /64 15/ AJ37 FP /64 14/ " SINGLE PIPE JET PACKAGE Diameter Setting Venturi Nozzle range SP235 23/64 15/ ' SP226 22/64 16/ ' SP225 22/64 15/ ' 2" CASING ADAPTER Shut-off PSI CAPACITY - U.S. GALLONS/HOUR B " casing adapter 85.00

5 REPLACEMENT PARTS PJC # MODELS Description PJC-50 PJC-75 PJC PG B Pressure gauge Brass elbow VT model mechanical seal /2 motor square flange (SF1.6) /4 motor square flange (SF1.0) motor square flange (SF1.0) (13") MV polyethylene tubing PJC Pump body Mechanical seal plate Ejector body Shallow / deep well /2 impeller /4 impeller impeller Diffuser /64" Short venturi tube /64" Short venturi tube /64" Short venturi tube /64" Short venturi tube /64" Short venturi tube /64" Short venturi tube /64" Nozzle /64" Nozzle /64" Nozzle /8"-16 X 1 ½" screw (plated) /4"-20 X 7/8" screw (S/S) Ejector gasket Square o'ring pump body O'ring diffuser Pump base /4" NPT brass plug /8"-16 x 1 ¼" Bolt (plated) /16" washer (plated) FTG-10TU pressure switch B-5

6 CONVERTIBLE MJ The MJ injection centrifugal pumps are exceptionally reliable and efficient. Specially designed for domestic purposes, it can also be used to pump water from wells, streams, ponds and many other water sources. Molded in Noryl, the high-precision impeller assures the MJ model an optimum efficiency. To eliminate all vibrations, the impeller is screwed to the shaft of the motor. Its stainless steel disc helps distinguish this pump from any other. In fact, this innovation facilitates maintenance and minimises corrosion. The housing and the motor bracket are made of grey cast iron and are machined with such precision that it maximizes considerably the performance. These parts are then treated with 2 layers of paint that give superior resistance to corrosion. 9 ¾ po (24.9 cm) Single-phase motor, "J-face" flange, 3450 RPM, 60 hz, 115/230 Volts, automatic thermal protection and stainless steel shaft. Internal disc for easy maintenance Pressure switch 30/50 lbs/in 2 Pressure gauge P.S.I. Ejector not included. L 9 po (22.9 cm) All pumps are tested at our factory Other voltages and TEFC motors also available Motor Suction inch Discharge inch Shipping weight lbs Prix détail suggéré MJ-50 1/ ¼" 1" MJ-75 3/ MJ B-6

7 PERFORMANCE CHART SHALLOW WELL APPLICATION CONVERTIBLE MJ MODEL MOTOR VENTURI & NOZZLE MJ-50 1/2 326 MJ-75 3/4 366 MJ MJ-50 1/2 287 MJ-75 3/4 327 MJ DISCH. PRESSURE P.S.I. DEPTH OF WATER IN FEET REGULAR PRESSURE CAPACITY - U.S. GALLONS/HOUR HIGH PRESSURE Shut-off PSI SHALLOW WELL EJECTOR KITS (included: ejector body, venturi tube, nozzle, ejector gasket, bolts and washers) REGULAR PRESSURE Diameter Venturi Nozzle OJ-7-50S 1/2 32/64 16/ OJ-7-75S 3/4 36/64 16/ OJ-7-100S 1 38/64 16/ HIGH PRESSURE Diameter Venturi Nozzle OJ-7-50H 1/2 28/64 17/ OJ-7-75H 3/4 32/64 17/ OJ-7-100H 1 34/64 17/ B-7

8 CONVERTIBLE MJ MODEL B-8 MOTOR MJ-50 1/2 MJ-75 3/4 MJ VENTURI & NOZZLE PERFORMANCE CHART DEEP WELL APPLICATION DISCH. DEPTH OF WATER IN FEET PRESSURE P.S.I. CAPACITY - U.S. GALLONS / HOUR To convert feet into meters: multiply by To convert U.S. gallons into liters: multiply by DEEP WELL EJECTOR KITS (included: ejector body, venturi tube and nozzle) Diameter Venturi Nozzle AJ37 FP /64 15/ AJ37 FP /64 15/ AJ37 FP /64 16/ AJ37 FP /64 15/ AJ37 FP /64 14/

9 REPLACEMENT PARTS MJ # Description MODELS MJ-50 MJ-75 MJ PG L pressure gauge Brass elbow VT model mechanical seal /2 motor «J-face» flange 115/230 Volts /4 motor «J-face» flange 115/230 Volts motor «J-face» flange 115/230 Volts MV polyethylene tubing /8"-16 x 1 1/2" hexagonal bolt (plated) Pump body - assembly (MJ) Motor bracket (MJ) ½ x 5 ¼ x 1/8 o'ring MJ/MS " impeller MJ/MS " impeller MJ/MS " impeller S/S disk /8"-16 x 3/4" hexagonal bolt (plated) Pump base /4" N.P.T. brass plug /8"-16 x 1 1/4" hexagonal bolt (plated) FSG-2 / pressure switch Shallow well ejector List price Deep well ejector List price Shallow well ejector body Deep well ejector body Shallow well ejector gasket /64" Nozzle /64" Nozzle /64" Nozzle /64" Nozzle /64" Short venturi tube /64" Nozzle /64" Short venturi tube /64" Long venturi tube /64" Short venturi tube /64" Long venturi tube /64" Short venturi tube /64" Long venturi tube /64" Short venturi tube /16" washer (plated) 0.20 B-9

10 CENTRIFUGAL OC / OCB The OC/OCB centrifugal pumps allow for optimum efficiency and economy, a good production capacity even when the flow is at a low or medium level. Used for applications such as lawn sprinklers, oversupplying systems, irrigation or for filling tanks. CHARACTERISTICS Motor on OC / OCB models: Impeller on OC models: Impeller on OCB models: Single-phase, ''J-face'' flange, 3450 RPM, 60 Hz, 115/230 Volts, c/w automatic thermal protection and stainless steel shaft. Made of Polycarbonate molded with great precision for maximum efficiency. Made of bronze, for pumping liquid at high temperature such as in boiler systems. **Both types of impellers are highly resistant to corrosion and wear** Mechanical seal on OC models: Mechanical seal on OCB models: Seal model #2000 assures continuous lubrication. Seal model #2000V (VITON) assures continuous lubrication even at temperatures up to 225 o F (107 o C) Discharge: 1 ¼" NPT Suction: 1 ¼" NPT OC-50 OC / OCB MODELS Motor HP Shipping weight lbs / OCB OC / OCB OC OCB OC OCB OC without motor OCB B-10

11 PUMPING CURVES OC / OCB OC MODEL Meters Feet PSI TOTAL HEAD DISCHARGE OC-75 OC-150 OC-50 OC US/GPM 0 L/MIN CAPACITY OCB MODEL 0 Meters Feet PSI TOTAL HEAD DISCHARGE OCB-75 OCB-50 OCB-150 OCB US/GPM 0 L/MIN CAPACITY 0 B-11

12 STAINLESS STEEL CENTRIFUGAL SSPC Efficiency: The SSPC pump is one of the most efficient pump on the market. This is due to the smooth surface finish provided by a stainless steel sheet, and Pompco s computerized designed impeller and casing. Versatility: The SSPC pump was designed to provide optimal performance in a variety of applications. Specially designed to be easily modified or customized Durability: The stainless steel body and impeller assure a longer life span. Impeller diameter Motor HP Impeller diameter Motor HP 170 FAMILY 0.24 Vane SSPC " SSPC " SSPC " SSPC " SSPC " SSPC " SSPC " SSPC " SSPC " Vane SSPC " 3/ SSPC " SSPC "LF 1/ SSPC " FAMILY SSPC " SSPC " SSPC " B-12

13 PUMPING CURVES SSPC B-13

14 B-14 PUMPING CURVES SSPC

15 SELF PRIMING CENTRIFUGAL PLSH Ideal for lawn sprinkling systems, irrigation and other areas where high capacity selfpriming pumps are required. FEATURES On site maintenance possible due to easy access to internal parts. Maximum water volume in pump housing assures easy and fast priming. Unique design of housing and polycarbonate fiber impeller helps provide high heads. Hard to unprime even with air in water. Long life assured by non-corrosive paint and strong construction. CHARACTERISTICS Single phase motor, square flange, 60 Hz, 115/230 Volts, capacitor starting, automatic thermal protection Priming up to 25 feet (7.62 m) 10 ¼ in (26.0 cm) All pumps are tested at our factory 17 in (43.2 cm) 10 in (25.4 cm) Motor HP Suction inch Discharge inch Shipping weight lbs PLS ½" 1 ½" PLS ½" 1 ½" PLSH ½" 1 ½" PLSH ½" 1 ½" B-15

16 PUMPING CURVES PLSH Motor PLS PLS PLSH PLSH Discharge pressure P.S.I. Pumping depth in feet Capacity - U.S. Gallons per Minute PLS-100 PLS-150 PLSH-150 PLSH-200 Shut off P.S.I Meters Feet PSI TOTAL HEAD DISCHARGE PLS-150 PLS-100 PLSH-150 PLSH US/GPM 0 L/MIN CAPACITY 0 B-16

17 REPLACEMENT PARTS PLSH # Description MODELS PLS-100 PLS-150 PLSH-150 PLSH model mechanical seal motor square flange (SF1.0) motor square flange (SF1.0) motor square flange (SF1.47) motor square flange (SF1.3) ¼ NPT plug (plated) Pump body Mechanical seal plate Diffuser impeller impeller impeller Impeller Square o'ring pump body Round o'ring diffuser /16"-14 x 1-1/4" screw (plated) /4"-20 x 1-1/2" screw (S/S) /8"-16 x 1" hexagonal bolt (plated) B-17

18 CENTRIFUGAL & PISTON MOTORS Centrifugal pump motors: «J-face» flange kw Volts Type of pump Shaft price list / / 230 MJ / OC / WGS S/S / / 230 MJ / OC / WGS S/S / 230 MJ / OC / WGS S/S ½ / 230 OC / WGS S/S / 230 WGS S/S WGS S/S / / 230 TEFC S/S "J-face" flange / 230 TEFC S/S ½ / 230 TEFC S/S TEFC S/S / OPD S/S OPD S/S ½ OPD S/S OPD S/S OPD S/S Centrifugal pump motors: square flange / / 230 PJC / PSW S/S / / 230 PJC / PSW S/S / 230 PJC / PSW / PLS S/S Square flange / / 230 PJC / PSW Nutride / / 230 PJC / PSW Nutride / 230 PJC / PSW / PLS Nutride ½ / 230 PLSH S/S / 230 PLSH S/S Piston pump motors / S-275 / S-450 S/S / / 230 S-600 S/S / / S/S Piston pump S/S B-18