ITT. Goulds Pumps. Marlow Series Trash Hog II. Engineered for life. Wastewater. Self-Priming Solids Handling Centrifugal Pumps

Size: px
Start display at page:

Download "ITT. Goulds Pumps. Marlow Series Trash Hog II. Engineered for life. Wastewater. Self-Priming Solids Handling Centrifugal Pumps"

Transcription

1 Goulds Pumps Marlow Series Trash Hog II Self-Priming Solids Handling Centrifugal Pumps Goulds Pumps is a brand of ITT Corporation. Engineered for life

2

3 TRASH HOG II A FULL RANGE OF PRODUCT FEATURES Industrial Duty Power End Provides rigid shaft support. Ample oil volume results in cooler running bearings for extended life. Back Pull-Out Design Complete power end with seal chamber can be easily removed from casing without disturbing suction and discharge piping. Easy to sling power end makes pull-out safe and simple. No need for special tools. Check Valve Coverplate Simplifi es check valve replacement and facilitates inspection of check valve and impeller without draining pump. External Impeller Adjustment Continuous high performance maintained by simple adjustment. Absolutely no shims required. Replaceable Elastomeric Check Valve With integral blow-out disc provides for instant repriming while preventing over-pressurization of casing. Class 125 Flanges Standard on suction and discharge for positive sealing in all industrial services. High Strength Stainless Steel Tapered Shaft Maximum strength and corrosion resistance. Tapered impeller fi t facilitates easy impeller removal. Renewable Wearplate Reduces maintenance costs; allows running clearances to be maintained for maximum pumping effi ciency and priming capability. Ligthweight Clean-Out Cover Maintenance-friendly cover allows safe and easy access to remove any debris. Silicon Carbide Mechanical Seal Hard faces provide substantially higher resistance to wear. Carbon/ceramic seal is optional. Back Pump-Out Vanes and Rear Impeller Ring Reduces seal chamber pressure and axial thrust for extended bearing and seal life. Prevents solids from entering seal chamber. Close radial clearance eliminates need to shim behind impeller. Heavy Vaned Open Impeller Designed for superior performance in toughest solids handling services. 1

4 TRASH HOG II PERFORMANCE COVERAGE TOTAL HEAD FEET x4-9 3x3-8 6x6-11 8x x x CAPACITY GPM TRASH HOG II SPECIFICATIONS Pump Size Flanges 125# Solid Size Max. Press. Speed Static Priming* Impeller Inches cm Inches cm PSI Typical Maximum Feet Meters 3DTHG 3 x x 7.6 Open DTHG 4 x x 10.2 Open ETHG 6 x x 15.2 Open GTHG 8 x x 20.3 Open GTHG 10 x x 25.4 Open GAG 12 x x 30.5 Open Maximum Temperature: 225 ºF (107 ºC) * Based on nominal pipe sizes with 5 feet of horizontal length and O discharge at typical speed. 2

5 TRASH HOG II MATERIALS OF CONSTRUCTION Item No. Description Materials 1 Casing Cast Iron 2 Casing Drain Plug Carbon Steel 4 Impeller Nut Carbon Steel 5 Impeller Washer Carbon Steel 8 Casing Gasket Lexide 10 Stuffi ng Box Cover Cast Iron 17 Mechanical Seal Single, Type 21 (Silicon Carbide vs. Silicon Carbide) 24 Shaft Sleeve (Optional) 416 SS 31 Bearing Frame Cast Iron 35 Frame Foot Cast Iron 36 Radial Bearing Double Row Angular Contact (1) 37 Impeller Key Steel 38 Shaft 17-4PH (2) (1) Single row bearings standard on 3x3-8, 6x6-11 and 8x8-14 pumps. (2) Carbon steel shaft standard on 3x3-8 and 4x4-1- pumps for all iron construction. (3) Single row bearings standard on 3x3-8 pump. Item No. Description Materials 42 Oil Seal Lip Seal (Buna\Steel) 49 Gasket, Suction Piece Lexide 50 Suction Piece Cast Iron 51 Check Valve BUNA-N 76 Inspection Cover Cast Iron 77 Gasket, Inspection Cover Lexide 83 Clean Out Cover Cast Iron 84 O-ring BUNA-N 89 Wear Plate Ductile Iron 91 Impeller Ductile Iron 109 O-ring BUNA-N 110 Bearing Housing Cast Iron 117 Thrust Bearing Double Row Angular Contact (3) 3

6 TRASH HOG II PERFORMANCE CURVES 60 HZ 4

7 TRASH HOG II PERFORMANCE CURVES 60 HZ 5

8 TRASH HOG II PERFORMANCE CURVES 60 HZ 6

9 TRASH HOG II PERFORMANCE CURVES 50 HZ 7

10 TRASH HOG II PERFORMANCE CURVES 50 HZ 8

11 TRASH HOG II PERFORMANCE CURVES 50 HZ 9

12 TRASH HOG II DIMENSIONS BARE PUMP Pump-End Only B A DISCHARGE 125 # DRILLING FILLER J I DISCHARGE S-DIA. SHAFT U-KEYWAY R K SUCTION V 125 # DRILLING L 6 CLEAN OUT T-DIA. (4) MTG. HOLES M W-DIA. (2) MTG. HOLES E G C D F H N O P Q REF. TRASH HOG II Pump-End Only Model Suct. Disch. A B C D E F G H I J K L M N O P Q R S T U V W M3DTH23EL ¼ ¾ ½ 11½ X M4DTH24EL ½ ¼ ¾ X M6ETH28EL ¼ ½ ½ M8GTH14EL ¼ ½ 9 9¼ 18½ ¼ ¾ ½ 13 x ¼ M10GTH9EL ¼ ¼ ½ 14¾ Dimensions in inches. Do not use for construction purposes without formal factory approval. Goulds Pumps reserves the right to make changes in design, materials, and prices without notice. 10

13 TRASH HOG II DIMENSIONS WITH BEDPLATE Long Coupled B C** A DISCHARGE 125 # DRILLING FILLER J DISCHARGE I** K SUCTION 125 # DRILLING D L 6 CLEAN OUT M F H TRASH HOG II Long-Coupled T-DIA. (6) MTG. HOLES ** These dimensions are based on open motors and may vary depending on motor manufacturer. Model Suct. Disch. Frame A B C D F H I J K L M N O P Q T 184T ¼ 43 M3DTH23EL T 215T 14¼ ½ 55¼ ½ 56¾ T T 56½ T 58 M4DTH24EL T ½ ¾ T T ½ T ¾ 24¾ 13¾ 256T 65¾ 8¼ 18 52½ 284T 22 23½ 67 M6ETH28EL ¼ ½ 286T ½ T ¾ 20 57½ 326T T T M8GTH14EL ¼ ¾ 74½ 19¾ T T ½ T T M10GTH9EL ¾ ½ 18¾ T T Dimensions in inches. Do not use for construction purposes without formal factory approval. Goulds Pumps reserves the right to make changes in design, materials, and prices without notice. N O P Q P Spacer Coupling I Q 57½ ½ ½ 69¾ ½ ½ 65½ 78 79¼ 66 80¼

14 TRASH HOG II DIMENSIONS MODEL 12 GA12EL Bare Pump B DISCHARGE 125# DRILING 64¼ 16½ SUCTION 125# DRILING 2 NPT PLUG 6 CLEAN OUT DIA ½ X ¼ KEY SLOT TYP DIA (8) HOLES 12 TYP 3½ ¾ 6¼ 3½ 33¾ With Bedplate B HP RPM FRAME A* B C* T T ½ C* DISCHARGE 125 # DRILLING 12 SUCTION 125 # DRILLING 39 A* 2 NPT PLUG 6 CLEAN OUT ¾ DIA (6) HOLES ¼ 2 B Dimensions in inches. Do not use for construction purposes without formal factory approval. Goulds Pumps reserves the right to make changes in design, materials, and prices without notice. * These dimensions are approximate depending on motor manufacturer. 12

15 NOTES 13

16 TYPICAL APPLICATIONS Sewage Lift Station Sump Waste Treatment Settling Ponds Waste Water Sludge Sewage Lift Station Waste Treatment Settling Pond Goulds Pumps and the ITT Engineered Blocks Symbol are registered trademarks and tradenames of ITT Corporation. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. MG2000 April, ITT Corporation Engineered for life

Trash Hog II Self Priming Solids Handling Centrifugal Pumps

Trash Hog II Self Priming Solids Handling Centrifugal Pumps Trash Hog II Self Priming Solids Handling Centrifugal Pumps Marlow Pumps ITT Industries Trash Hog II A Full Range of Product Features Industrial Duty Power End Provides rigid shaft support. Ample oil

More information

ITT. Goulds Pumps. Marlow Series 20EVP. Engineered for life. Commercial Water

ITT. Goulds Pumps. Marlow Series 20EVP. Engineered for life. Commercial Water Goulds Pumps Marlow Series 2EVP Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents STANDARD UNIT INCLUDES: Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered

More information

ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water.

ITT. Goulds Pumps. G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps. Engineered for life. Commercial Water. ITT Goulds Pumps G&L Series SSH S & M-Group 316 Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features Superior Materials of Construction: AISI Type 316L

More information

20EVP-A SERIES. Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents. Marlow Pumps. Marlow Pumps.

20EVP-A SERIES. Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents. Marlow Pumps. Marlow Pumps. 2EVP-A SERIES Vertical In-Line Self-Priming Centrifugal Pumps for Petroleums and Solvents PUMP: Heavy-duty cast iron construction, with 2 NPT female threaded, in-line suction and discharge ports. This

More information

ITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6" Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems

ITT. Goulds Pumps 65L, 95L, 120L, 160L, 250L, 320L 6 Stainless Steel Submersible Pumps. Engineered for life B65-320L. Residential Water Systems B65-32L ITT Residential Water Systems Goulds s 65L, 95L, 12L, 16L, 2L, 32L 6" Stainless Steel Submersible s 6 Hz High Capacity For 6" and larger wells Goulds s is a brand of ITT Corporation. www.goulds.com

More information

Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service

Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,

More information

ITT. Goulds Pumps. 5GB, 7GB, 10GB, 18GB, 25GB, 33GB High Pressure Multi-Stage Booster Pump. Engineered for life. Residential Water Systems FEATURES

ITT. Goulds Pumps. 5GB, 7GB, 10GB, 18GB, 25GB, 33GB High Pressure Multi-Stage Booster Pump. Engineered for life. Residential Water Systems FEATURES Goulds Pumps GB, 7GB, 1GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:

More information

ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps.

ITT. Goulds Pumps G&L Series NPO. Engineered for life. Commercial Water. Open Impeller All Stainless Steel End Suction Pumps. ITT Goulds Pumps G&L Series NPO Open Impeller All Stainless Steel End Suction Pumps www.goulds.com Engineered for life A Full Range of Product Features NPO Product Line Numbering System Superior Materials

More information

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ 1750 RPM - 60Hz. CAPACITIES TO 160 GPM (10 LPS) HEADS TO 57 FEET (17.3 M) 1450 RPM - 50Hz. CAPACITIES TO 140 GPM (8.8 LPS) HEADS TO 40 FEET (12 M) Individual performance

More information

TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES

TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN. PrimeLine SP SPM & SPH SERIES TECHNICAL BROCHURE BSPMSPH R1 SOLD SEPARATELY OR BUILT IN PrimeLine SP SPM & SPH SERIES FEATURES Self Priming Design: Features a replaceable check valve which acts to retain sufficient liquid in the casing

More information

5GB, 7GB, 10GB, 18GB, 25GB, 33GB

5GB, 7GB, 10GB, 18GB, 25GB, 33GB B-33GB GB, 7GB, GB, 18GB, 2GB, 33GB High Pressure Multi-Stage Booster Pump FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction: Standard

More information

Goulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps

Goulds 3181 High-temperature/Pressure Paper Stock/ Process Pumps High-temperature/Pressure Paper Stock/ Process Pumps Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries Capacities to 13,000 GPM (3000 m 3 /h) Heads to 410 feet

More information

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½

Series: GA6-1½, GA6-2, GA7-1¼, GA7-1½ Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates

More information

Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps

Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds 3186 High-temperature/Pressure Paper Stock/ Process Pumps Goulds 3186 Designed to Handle High Temperature and

More information

Dry installed end-suction pumps, LSN-series. according to ISO 2858 / ISO 5199

Dry installed end-suction pumps, LSN-series. according to ISO 2858 / ISO 5199 Dry installed end-suction pumps, LSN-series according to ISO 2858 / ISO 5199 Technical characteristics Performance 50 Hz 60 Hz Capacity up to 600 m 3 /h 2900 USgpm Head up to 170 m 800 feet Speed up to

More information

PWA-IL B73.2 IN-LINE

PWA-IL B73.2 IN-LINE PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP PWA-IL ANSI/ASME B73.2 IN-LINE PROCESS PUMP COMPETITIVE ADVANTAGES vs. Ductile Iron n High-strength, impact resistant liquid ends for improved durability and

More information

High-Temperature and Pressure Paper Stock / Process Pump

High-Temperature and Pressure Paper Stock / Process Pump 3186 High-Temperature and Pressure Paper Stock / Process Pump 3186 Designed to handle High-Temperature and High-Pressure services of the Pulp & Paper Industries. Capacities to 3000 m³/h (13,000 GPM) Heads

More information

EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:

EFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date: Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation

More information

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/ /3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and bedplates

More information

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS

TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS TECHNICAL BROCHURE B36/3742 R2 3642/3742 CLOSE-COUPLED AND FRAME-MOUNTED CENTRIFUGAL PUMPS FEATURES Compact Design: Close coupled, space saving design provides easy installation. Flexible couplings and

More information

HORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST

HORIZONTAL SPLIT CASE SINGLE STAGE DOUBLE SUCTION Type AE CHECKING LIST Section Tab 1200 SINGLE STAGE DOUBLE SUCTION Section 1210 List Prices Removed 07-01-02 Use Rapid Section 1220 Data Page 0.1 & (Blank)(03-30-07) 1 & 2 (03-30-07) 2.1 & 2.2 (03-30-07) 2.21 & 2.22 (03-30-07)

More information

PWA-LF LOW FLOW ANSI PROCESS PUMP

PWA-LF LOW FLOW ANSI PROCESS PUMP PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no

More information

PWA-LF LOW FLOW ANSI PROCESS PUMP

PWA-LF LOW FLOW ANSI PROCESS PUMP PWA-LF LOW FLOW ANSI PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no

More information

Goulds Severe Duty Slurry Pump

Goulds Severe Duty Slurry Pump Goulds 5500 Severe Duty Slurry Pump 5500 Proven leadership in mining and mineral processing Proven Leadership 100 years of slurry pumping experience. Many industry firsts including: hard metal slurry pump,

More information

Index - Section 14 End Suction Pump Semi-Open Impeller

Index - Section 14 End Suction Pump Semi-Open Impeller Index - Section End Suction Pump Semi-Open Impeller ITEM S Product Numbering System...1 Typical Architects / Engineers Specifi cations - Series 4000...2 Seal Application...3-4 Technical Charts...5-6 Pump

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM

More information

PWA ANSI / ASME B73.1 PROCESS PUMP

PWA ANSI / ASME B73.1 PROCESS PUMP PWA ANSI / ASME B73.1 PROCESS PUMP COMPETITIVE ADVANTAGES Carbon Steel vs. Ductile Iron n High strength, impact resistant Carbon Steel liquid ends for improved durability and pressure containment at no

More information

Volute Casing Pumps LSN. according to iso 2828 / iso Jansen Pompentechniek T: +31(0) E:

Volute Casing Pumps LSN. according to iso 2828 / iso Jansen Pompentechniek T: +31(0) E: Volute Casing Pumps LSN according to iso 2828 / iso 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up

More information

G&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries

G&L Series MPVN. High Pressure Multi-Stage Pumps. Goulds Pumps. ITT Industries G&L Series MPVN High Pressure Multi-Stage Pumps www.goulds.com Goulds Pumps ITT Industries A Full Range of Product Features Performance Range: Capacities up to GPM ( m /h) Head up to feet ( m) Maximum

More information

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps

855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps 855 Filtrate Pump, Close Coupled and Overhead Mounted Pumps Technical Specification Pages This page left intentionally blank. 1.0 Overview. The 855 Series is Carver s offering specifically designed to

More information

Ductile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A

Ductile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options

More information

CLOSED COUPLED CENTRIFUGAL PUMPS

CLOSED COUPLED CENTRIFUGAL PUMPS SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM

More information

Bulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS

Bulletin D51 September D51 D61 D71 D91 Series. Centrifugal Pumps. Capacities to 240 GPM Heads to 360 Feet MTH PUMPS ulletin D1 September 006 D1 D61 D71 D91 Series Centrifugal Pumps Capacities to 0 GPM Heads to 60 eet MTH PUMPS Casing Standard casing construction of all units is ASTM A8 Class 0 cast iron. All bronze

More information

Basic Hydraulic Features. Basic Mechanical Features

Basic Hydraulic Features. Basic Mechanical Features APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered

More information

Series: GNA5-1-1/4, GNA6-1-1/4

Series: GNA5-1-1/4, GNA6-1-1/4 1750 RPM - 60Hz. CAPACITIES TO 40 GPM (2.5 LPS) HEADS TO 0 FEET (9 m) USA: (97) 778-8947 Canada: (905) 457-622 International: (97) 615-598 1 500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 15 FEET

More information

D51 D61 D71 D91 Series

D51 D61 D71 D91 Series MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications

More information

High Temperature Air-Cooled Hot Oil Pumps

High Temperature Air-Cooled Hot Oil Pumps Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required

More information

FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8

FLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8 FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:

More information

High Temperature Air-Cooled Hot Oil Pumps

High Temperature Air-Cooled Hot Oil Pumps Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series

More information

Patent Pending. High Performance Self-Priming. Centrifugal Trash Pumps.

Patent Pending. High Performance Self-Priming. Centrifugal Trash Pumps. High Performance Self-Priming Centrifugal Trash Pumps www.gormanrupp.com A History of Innovation Gorman-Rupp has been revolutionizing the pumping industry since. Many of the innovations introduced by Gorman-Rupp

More information

SUGGESTED SPECIFICATIONS

SUGGESTED SPECIFICATIONS PART 1 - GENERAL 1.01 SCOPE A. Pumps to be supplied under this specification shall be of a severe duty, recessed cupped impeller design suitable for use in (SLUDGE, GRIT, ETC. APPLICATIONS) with a 20 year

More information

ITT. Goulds Pumps 70L, 90L, 150L, 200L, 300L Stainless Steel 6" Submersible Pumps. Engineered for life. Residential Water Systems. 60 Hz High Capacity

ITT. Goulds Pumps 70L, 90L, 150L, 200L, 300L Stainless Steel 6 Submersible Pumps. Engineered for life. Residential Water Systems. 60 Hz High Capacity Goulds Pumps 7L, 9L, 15L, 2L, 3L Stainless Steel 6" Submersible Pumps 6 Hz High Capacity For 6" and larger wells Goulds Pumps is a brand of ITT Residential and Commercial Water. www.goulds.com Engineered

More information

EBARA Self Priming Trash Pump. Type EFQT-EFQU

EBARA Self Priming Trash Pump. Type EFQT-EFQU Type EFQT-EFQU Contents Section Page Model Designation 2 Features 3 Selection Chart 7 Dimension Drawings 20 Technical Data 24 Sectional View 25 1 Model Designation EFQ T 2 A MODEL TYPE EFQ self priming

More information

ITT SSV. Goulds Pumps. Engineered for life. Commercial Water. G&L Series Repair Parts

ITT SSV. Goulds Pumps. Engineered for life. Commercial Water. G&L Series Repair Parts ITT Commercial Water Goulds Pumps SSV G&L Series epair Parts Goulds Pumps is a brand of ITT Water Technology, Inc. - a subsidiary of ITT Industries, Inc. www.goulds.com Engineered for life TABLE OF CONTENTS

More information

EN. 850 Filtrate Pumps. Technical Specification Pages

EN. 850 Filtrate Pumps. Technical Specification Pages 850 17.01.EN 850 Filtrate Pumps Technical Specification Pages 850 Series Filtrate Pump 850 17.01.EN This page left intentionally blank. 1.0 Overview. The 850 is Carver s filtrate pump line designed for

More information

TECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP

TECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing

More information

barmesapumps.com WHAT IS AN ANSI PUMP

barmesapumps.com WHAT IS AN ANSI PUMP WHAT IS AN ANSI PUMP In 1977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition of the materials and safety specifications,

More information

Series: CT. 4CT RPM - 60Hz. CT RPM - 60Hz. (See Indivdual curves for symbol number)

Series: CT. 4CT RPM - 60Hz. CT RPM - 60Hz. (See Indivdual curves for symbol number) 4CT - 25-60Hz. CT - 450-60Hz. (See Indivdual curves for symbol number) Symbol 2 4 5 6 8 9 0 *MAXIMUM HEAD HP /2 /4 / /2 /4 / /2 /4 /4 /2 /4 Catalog - Phase - Phase 5CTM CTM CT6M 5CT6M CT6M CT5M 5CT5M 24CTM

More information

Centrifugal End Suction Fire Pumps

Centrifugal End Suction Fire Pumps Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These

More information

NC State University Design and Construction Guidelines Division 23 Hydronic Pumps

NC State University Design and Construction Guidelines Division 23 Hydronic Pumps 1.0 Purpose A. The following guidelines apply to the selection of pumps primarily for circulating water. It is the goal of NC State to purchase pumps that are selected to provide a long service life, minimal

More information

Series: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number)

Series: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number) C A L L -866-670 -0533 O R D E R O N L INE www.burkspumpcatalog.com Series: ES 4ES - 725 RPM - 60Hz. ES - 3450 RPM - 60Hz. (See Indivdual curves for symbol number) ES - 2900 RPM - 50Hz. (See Indivdual

More information

Volute Casing Pumps LSN. according to iso 2828 / ISO 5199

Volute Casing Pumps LSN. according to iso 2828 / ISO 5199 Volute Casing Pumps LSN according to iso 2828 / ISO 5199 Technical Data Performance Range: m Capacity up to 500m 3 /h (1980USgpm) m Head up to 150m (492feet) m Speed 2950/3550rpm Pump Sizes: m DN 25 up

More information

Marlow Series Prime Line

Marlow Series Prime Line REPAIR PARTS RPRIMELINE Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS REPAIR PARTS Prime Line M2P M4P Pumps 27 50 49 27 54 1 8 10 6 17 4 67 5 24 37 63 53 51 2 7 46 2 PAGE 2 Prime Line 2" Pump

More information

390 Series Multi-Stage Vertical In-Line Centrifugal Pumps

390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.

More information

Goulds Small Capacity Double Suction Pump

Goulds Small Capacity Double Suction Pump Goulds 3410 Small Capacity Double Suction Pump 3410 Double Suction Pumps Designed for a Wide Range of Industrial, Municipal, Capacities to 7,000 GPM (1591 m3/h) Heads to 550 feet (168 m) Temperatures to

More information

ITT GS-CBM. Goulds Pumps. Engineered for life B5-75GSX. Residential Water Systems. GS Xtreme 60 Hz 4" Submersible Pumps FEATURES

ITT GS-CBM. Goulds Pumps. Engineered for life B5-75GSX. Residential Water Systems. GS Xtreme 60 Hz 4 Submersible Pumps FEATURES B5-75GSX ITT Residential Water Systems Goulds Pumps GS-CBM Goulds Pumps is a brand of ITT Corporation. www.goulds.com Engineered for life GS Xtreme 6 Hz 4" Submersible Pumps FEATURES n Field Proven Design:

More information

Series: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number)

Series: ES. 4ES RPM - 60Hz. ES RPM - 60Hz. (See Indivdual curves for symbol number) 4ES - 725 RPM - 60Hz. ES - 3450 RPM - 60Hz. (See Indivdual curves for symbol number) ES - 2900 RPM - 50Hz. (See Indivdual curves for symbol number) Individual performance curves should be checked for fi

More information

KW Submersible, Single-Vane Impeller

KW Submersible, Single-Vane Impeller Sewage Pumps KW Submersible, Single-Vane Impeller Performance Curve Total Head (FT) Up to 2 Solids-Handling Heavy-Duty, Silicon Carbide Seals Stainless Steel Keyed Shaft Flows to 325 GPM / Heads to 95

More information

Model 3550 ASME/ANSI B73.1M Industrial Process Pumps

Model 3550 ASME/ANSI B73.1M Industrial Process Pumps 3500 Series Model 3550 ASME/ANSI B73.1M Industrial Process Pumps The Aurora Model 3550 was designed to perform in the toughest industrial applications whether in the chemical, petro-chemical, mining, pulp

More information

Goulds Process Pumps designed for severe corrosive services

Goulds Process Pumps designed for severe corrosive services Process Pumps designed for severe corrosive services Non-metallic vertical sump and process pumps designed for severe corrosive services Capacities to 5000 GPM (11 m3/hr) Heads to 275 feet (85m) Design

More information

TECHNICAL BROCHURE B45-70HB R2 45HB, 70HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP

TECHNICAL BROCHURE B45-70HB R2 45HB, 70HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP TECHNICAL BROCHURE B45-7HB R2 45HB, 7HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP FEATURES Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free

More information

PWV API 610 Vertical Turbine Pump VS6 (Can Type) VS1 (Sump Type)

PWV API 610 Vertical Turbine Pump VS6 (Can Type) VS1 (Sump Type) PWV API 610 Vertical Turbine Pump VS6 (Can Type) VS1 (Sump Type) OUTLINE DIMENSIONS VS6 (Can Type) BARREL AND BOWL DIMENSIONS (Inches) BOWL BM APPROX. BOWL WT. (lbs.) SIZE BL & B BN BP E 1st Stg. Add Stg.

More information

Repair Parts MODEL G&L Series NPE/NPE-F

Repair Parts MODEL G&L Series NPE/NPE-F Repair Parts MODEL G&L Series NPE/NPE-F 2005 ITT Water Technology, Inc. Effective June, 2005 RNPE TABLE OF CONTENTS NPE END SUCTION NPE Product Line Numbering System...1 NPE Seal Chart (Part of Numbering

More information

Flow Range Horsepower Best Eff. Discharge Minimum Rotation➀ GPM Range GPM Connection Well Size 5LS " CCW " CCW

Flow Range Horsepower Best Eff. Discharge Minimum Rotation➀ GPM Range GPM Connection Well Size 5LS  CCW  CCW 6 Hz LS EXTENSION 4" Submersible Pumps MODEL LS 5LS, 7LS, LS, LS, 8LS, 25LS FEATURES Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor

More information

UNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:

UNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE: Page 1701.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options

More information

UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE

UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE SERIES 4223, 4323 (API 682 Seal) Section 304 Page 304. TABLE OF CONTENTS Features & Benefits...2 Revolvable Pump Casings...2 Materials of Construction...2 Cutaway View & Pump Features...3 Key...4 Specifications...4

More information

Goulds Model JC. Lenntech. Slurry Pump. Tel Fax

Goulds Model JC. Lenntech. Slurry Pump. Tel Fax Goulds Model JC Slurry Pump Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Goulds JC Designed for Handling a Wide Range of Corrosive / Abrasive Slurries Capacities

More information

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) Series: G5-1¼, G6-1¼ 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3 LPS) HEADS TO 9 FEET (8 M) USA: (937) 778-8947 Canada: (905) 457-63

More information

DPS. The SSV Dual Pump System

DPS. The SSV Dual Pump System DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve

More information

FE Frame-Mounted End Suction Pumps. Leading The Flow. TACO.

FE Frame-Mounted End Suction Pumps. Leading The Flow. TACO. FE Frame-Mounted End Suction Pumps Leading The Flow. TACO. Quiet, dependable power and proven performance. FE Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics.

More information

Bulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs

Bulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................

More information

AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS

AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES MODEL 3550 ASME/ANSI B73.1 INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM INDUSTRIAL PROCESS PUMPS AURORA 3500 SERIES Model 3550 ASME/ANSI B73.1 Industrial Process Pumps Capacities to GPM

More information

SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS

SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS GRpumps.com S U P E R T S P E C I F I C A T I O N S SIZES MATERIALS OF CONSTRUCTION MAX. CAPACITY MAX. HEAD MAX. SOLIDS 3", 4", 6", 8", 10" (75 mm, 100 mm, 150

More information

ITT. Engineered for Life. GS Subs, New Guardian System and You, Stronger Together!

ITT. Engineered for Life. GS Subs, New Guardian System and You, Stronger Together! GS Subs, New Guardian System and You, Stronger Together! GS Submersibles have always had a reputation for being reliable and tough pumps. Now the best is even better! The new Guardian System now makes

More information

CASING COVER PLATE LUBRICATION GASKETS PRESSURE RELIFE VALVE SEAL OPTIONAL EQUIPMENT

CASING COVER PLATE LUBRICATION GASKETS PRESSURE RELIFE VALVE SEAL OPTIONAL EQUIPMENT Series: PFSPT Self-Priming Centifugal Pumps Size: x, Solids -1/ DISCHARGE x, lbs. Flange LIQUID TEMPERATURE 1 F CASING IMPELLER SHAFT SHAFT SLEEVE WEAR RING COVER PLATE FLAP VALVE Gray Iron ASTM A- Class

More information

AURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS

AURORA Series MODEL 3560 ASME/ANSI B73.1M INDUSTRIAL PROCESS PUMPS AURORA 3500 Series MODEL 3560 ASME/ANSI B73.M INDUSTRIAL PROCESS PUMPS WWW.AURORAPUMP.COM AURORA 3500 Series Model 3560 ASME/ANSI B73.M Industrial Process Pumps Capacities to 7000 GPM (590 m 3 /hr) Heads

More information

SERIES CS CLOSE COUPLED TURBINE PUMPS

SERIES CS CLOSE COUPLED TURBINE PUMPS PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 8 0 6 7 8 MAXIMUM HEAD

More information

Series 8SHDU. Specifications: Series: 8SHDU 25-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3.50" Spherical Solids Handling

Series 8SHDU. Specifications: Series: 8SHDU 25-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3.50 Spherical Solids Handling www.cranepumps.com Series 8SHDU 21 Frame Driver Specifications: DISCHARGE... 8", 125 lb. Horizontal Flange Slotted to accommodate 200mm ISO Flanges LIQUID TEMPERATURE... 4 F (40 C) Continuous VOLUTE...

More information

Elite. KSB Australia Pty Ltd. Centrifugal Pump

Elite. KSB Australia Pty Ltd. Centrifugal Pump Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning

More information

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M)

Series: G5-1¼, G6-1¼ RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) Series: G5-1¼, G6-1¼ C A L L 1-866 -670-0533 O R D E R O N L IN E www.burkspumpcatalog.com 3500 RPM - 60Hz. CAPACITIES TO 80 GPM (5 LPS) HEADS TO 135 FEET (41 M) 2900 RPM - 50Hz. CAPACITIES TO 68 GPM (4.3

More information

Vogel - Volute Casing Pumps. according to ISO 2828 / ISO 5199 Design LSN

Vogel - Volute Casing Pumps. according to ISO 2828 / ISO 5199 Design LSN Vogel - Volute Casing Pumps according to ISO 2828 / ISO 5199 Design LSN 1 Volute Casing Pumps - Design LSN - according ISO 2858 / ISO 5199 Performance Capacity up to 450 m 3 /h (1980 USgpm) Head up to

More information

UNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE

UNIVERSAL PRODUCT LINE: DUCTILE IRON JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE Page 1602.1 TABLE OF CONTENTS Features & Benefits...2 Porting & Sealing...2 Jacketing...2 Revolvable Pump Casings...2 Cutaway View & Pump Features...3 Model Number Key...4 Standard Materials of Construction...4

More information

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps... PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series

More information

Goulds High-Pressure Multi-Stage Pumps

Goulds High-Pressure Multi-Stage Pumps Goulds 3311 High-Pressure Multi-Stage Pumps Goulds Model 3311 Multistage Pumps Designed for a Wide Range of High Pressure Services Goulds Model 3311 is a radial split, segmented ring multistage pump...

More information

G&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS

G&L Pumps. TECHNICAL Brochure BAC8100. Series A-C 8100 SPLIT CASE PUMPS TECHNICAL Brochure BAC8 Series A-C 8 SPLIT CASE PUMPS TABLE OF CONTENTS Useful Pump Formulas 2 Performance Curves 3-5 Materials of Construction (Standard) 6 Materials of Construction (Optional) 7 Pump

More information

ANSI Centrifugal Process Pumps. 911 Series

ANSI Centrifugal Process Pumps. 911 Series ANSI Centrifugal Process Pumps 9 Series WHAT IS AN ANSI PUMP In 977, the American National Standard Institue (ANSI) established criteria for centrifugal pumps in terms of dimension, chemical composition

More information

ITT. Goulds Pumps 45J and 70J. Engineered for life B45-70J. Residential Water Systems. Features. 60 Hz High Capacity Flat Bowl 6" Submersible Pumps

ITT. Goulds Pumps 45J and 70J. Engineered for life B45-70J. Residential Water Systems. Features. 60 Hz High Capacity Flat Bowl 6 Submersible Pumps B45-7J Goulds Pumps 45J and 7J Hz High Capacity Flat Bowl 6" Submersible Pumps For 6" and larger wells Goulds Pumps is a brand of Corporation. www.goulds.com Engineered for life Features n Powered for

More information

MYERS MODELS 4V AND 4VX

MYERS MODELS 4V AND 4VX MYERS MODELS 4V AND 4VX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4V) AND HAZARDOUS LOCATION (4VX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4V AND 4VX Solids Handling Wastewater Pumps The Right Choice

More information

UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE

UNIVERSAL PRODUCT LINE: STEEL EXTERNALS JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE SERIES 223A, 4223A, 323A, 4323A Page 1302.1 Issue B TABLE OF CONTENTS Features & Benefits...2 Jacketing...2 Relief Valve Configurations...3 Porting & Sealing...3 Revolvable Pump Casings...3 Cutaway View

More information

CENTRIFUGAL PUMPS GAS ENGINE FTSP FEATURES APPLICATIONS SPECIFICATIONS

CENTRIFUGAL PUMPS GAS ENGINE FTSP FEATURES APPLICATIONS SPECIFICATIONS FEATURES Volute: Ductile iron rugged construction. Self-priming with priming and drain plugs. Removable front cover features a built-in check valve to facilitate priming Impeller: Cast iron semi-open,

More information

UNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE:

UNIVERSAL PRODUCT LINE: CAST IRON NON-JACKETED PUMPS SERIES DESCRIPTION TABLE OF CONTENTS RELATED PRODUCTS OPERATING RANGE: Page 1401.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features (124A/AE, 4124A/AE, 324A, 4324A)...4

More information

High Capacity Centrifugal & Sprinkler Pumps

High Capacity Centrifugal & Sprinkler Pumps High Capacity Centrifugal & Sprinkler Pumps FW0724 1016 Supersedes 0212 Stainless steel or cast iron construction Stainless steel impellers Discharge rotates in 90 increments on some models Pressures to

More information

Goulds LF 3196 i-frame. Low Flow ANSI Process Pump with i-alert Patented Intelligent Monitoring

Goulds LF 3196 i-frame. Low Flow ANSI Process Pump with i-alert Patented Intelligent Monitoring Goulds LF 3196 i-frame Low Flow ANSI Process Pump with i-alert Patented Intelligent Monitoring 2 LF 3196 i-frame Low Flow ANSI Process Pumps Designed for Total Range of Industry Services Capacities to

More information

Bulletin C Dean Pump Division. R Series High Temperature Pumps R400/R4000 RWA RMA5000 RA2000/RA3000

Bulletin C Dean Pump Division. R Series High Temperature Pumps R400/R4000 RWA RMA5000 RA2000/RA3000 Bulletin C 1.4.4 Dean Pump Division R Series High Temperature Pumps R4/R4 RMA RWA RA2/RA3 R Series High Temperature (Hot Oil/Hot Water) Centrifugal Process Pumps Process Industries Heat Transfer OEM s,

More information

4500C Series Vortex Pumps

4500C Series Vortex Pumps Section 009 Page 003 4500C Series Vortex Pumps Table of Contents 4500C Performance 2" x 2" - 4523C, Multiple Speed... 004 3" x 3" - 4523C, Multiple Speed... 004 4" x 4" - 4522C, Multiple Speed... 005 4"

More information

High-Head, High Performance, Self-Priming Trash Pumps

High-Head, High Performance, Self-Priming Trash Pumps MUNICIPAL INDUSTRIAL CONSTRUCTION / RENTAL AGRICULTURE High-Head, High Performance, Self-Priming Trash Pumps A History of Innovation Gorman-Rupp has been revolutionizing the pumping industry since 1933.

More information

MYERS MODELS 4R AND 4RX

MYERS MODELS 4R AND 4RX MYERS MODELS 4R AND 4RX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4R) AND HAZARDOUS LOCATION (4RX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4R AND 4RX Solids Handling Wastewater Pumps The Right Choice

More information

Series 6SHV. Specifications: Series: 6SHV 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

Series 6SHV. Specifications: Series: 6SHV 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3 Spherical Solids Handling Series 6SHV 21 Frame Driver Specifications: DISCHARGE... 6", 1 lb. Horizontal Flange Slotted to accommodate 1mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,

More information

SERIES CS CLOSE COUPLED TURBINE PUMPS

SERIES CS CLOSE COUPLED TURBINE PUMPS PumpAgents.com - Click here for Pricing/Ordering SERIES CS CLOSE COUPLED TURBINE PUMPS CS- 7 RPM - 60Hz. CS - 0 RPM - 60Hz. (See Individual curves for symbol number) Symbol No. 6 7 0 6 7 MAXIMUM HEAD H.P.

More information

Self-Priming Process Pumps with Patented Intelligent Monitoring. Lenntech

Self-Priming Process Pumps with Patented Intelligent Monitoring. Lenntech Self-Priming with Patented Intelligent Monitoring Lenntech info@lenntech.com Tel. +31-12-61-9 www.lenntech.com Fax. +31-12-616-289 Goulds 3796 Self-Priming Designed for Total Range of Industry Services

More information