Boardwalk Pipeline Partners, LP Contractor Covered Task List Last updated 9/17/2018

Transcription

1 003 Test Breakout Tank Overfill Protective Devices Oral 004 Inspect and Calibrate Breakout Tank Overfill Protective Devices Oral 005 Repair Breakout Tank Overfill Protective Devices Inspection of Breakout Tanks Oral and Certificate 007 Operate Valves 008 Measurement of Wall Thickness with Ultrasonic Device 016 Purging - Hazardous Liquids (c)(10) 018 Inspect Navigable Waterway Crossing (b) 026 Inspect/Test Pump Station Remote Shutdown Devices 103 Non-destructive Testing (Other than testing of welds) -- Mag Particle 201 Abnormal Operating Conditions Related to Welding on Pipelines (h) Monitoring of Welding Process (a) (c) Visual Inspection of Welds not Non-Destructively Tested (b) (c) 204 Non-Destructive Testing (Dye Penetrant) Non-Destructive Testing (Mag Particle) Non-Destructive Testing (Ultrasonic) Non-Destructive Testing (X-Ray) Oral Oral Oral Page 1 Copyright Veriforce, LLC. All rights reserved. Rev. 38

2 208 Plastic Pipe Joining: Butt Fusion Plastic Pipe Joining: Mechanical Joining Plastic Pipe Joining: Electrofusion Joining Joining of Metal Pipe and Components by means other than Welding - Threaded Connections 215 Joining of Metal Pipe and Components by means other than Welding- Flanged Connections Small Diameter Metal Tubing and Fitting Installation Installation of Above Ground Pipe of Buried Pipelines When Exposed Protection of Coating When Backfilling and From Below Ground Supports (d) (c)(6) ( c ) (b) No 1:0 1 No 1:0 1 No 1: Oral Protection of Coatings From Above Ground Structures (d) 406 Conduct Test to Determine Cathodic Protection Current Requirements (a) (d)(6) 407 Perform Cathodic Protection Survey (a) (e) (e) (d)(6) Oral (a) 410 Clear Shorted Casing (c) (b)(1) (a) 411 Inspect/Test to Assure Electrical Isolation is Adequate (d) (d)(6) Install CP Leads on Pipeline Using Exothermic Weld Anode Installation on Submerged Pipeline or Facilities Inspect for Internal Corrosion Whenever Pipe is Removed (b)(1) (c) Page 2 Copyright Veriforce, LLC. All rights reserved. Rev. 38

3 415 Monitoring for Internal Corrosion with Probes and Coupons (d)(5) (b) 417 Atmospheric Corrosion Monitoring General and Localized Corrosion Measurement (Remedial Measures) (a)(b) (b) Soil Resistivity 421 Measurement of Depth of Pitting with Pit Gage Perform Direct Current Voltage Gradient (DCVG) Survey (d)(7) 424 Perform AC Current Attenuation (ACCA) Survey (e) (d)(7) Pin Brazing to Install CP Leads on Pipeline Installation and Testing of Mechanical Electrical Connections (a) Install Cathodic Protection Electrical Isolation Devices Troubleshoot In-Service Cathodic Protection System Measure and Identify Mechanical Damage on Installed Pipe and Components Perform Close Survey (e) (e) (d)(6) & (7) (a) 480 Apply Approved Coating by Hand Application (a) Apply Approved Coatings by Mechanical Spray and Hand Application Methods (a) Apply Approved Coatings by Wrap Application (a) Conduct a Pressure Test (d) Page 3 Copyright Veriforce, LLC. All rights reserved. Rev. 38

4 502 Conduct Pressure Test on Pipe that is to be Operated at a Pressure <100 psig 601 Start-up/Shut-down of Pipeline to Assure Operation Within MAOP / MOP (b) (b)(5) 602 Monitoring Pipeline Pressure (b)(5) Compressor Units: Startup, Operation, Shutdown and Purging Before Returning to Service 604 Locate, Mark, and Remediate Exposed Pipelines in the Gulf of Mexico (b)(7) (b)(6) ( c )(9) Oral (b) Locate Line/Install Temporary Marking of Buried Pipeline (c)(5) (c)(5) 606 Locate and Mark Submerged Pipelines (c)(5) 607 Damage Prevention: Observation of Excavating and Backfilling (c)(6) (b) (c)(6) 608 Damage Prevention for Blasting Near a Pipeline (c)(6) (c)(6) Oral 609 Inspect and Maintain Odorization Equipment (e) 610 Monitor Odorant Concentration (f) 611 Hot Tap (Steel Pipe) Hot Tap (Plastic Pipe) Purge Pipeline Facilities With Gas (a) 614 Purge Pipeline Facilities With Air or Inert Gas (b) (c)(10) Oral 616 Atmospheric Monitoring during Hot Work Operations ( c )(11) 619 Damage Prevention during Vacuum Excavation and Backfilling Activities 661 Launching and/or Receiving Internal Devices (Pigs) (c) (d)(5)(iv ) (d)(9) 701 Patrolling Pipeline and Leakage Survey without Instrument (d)(4) (c)(6) (c)(6) Oral (a) Oral Page 4 Copyright Veriforce, LLC. All rights reserved. Rev. 38

5 702 Leakage Survey with Leak Detection Device Placing/Maintaining Line Markers (a) (c) 704 Permanent Field Repair by Grinding Permanent Field Repair Using Composite Materials (Clockspring) 706 Permanent Field Repair Using Composite Materials (Armor Plate) 707 Permanent Field Repair Using Bolt-On Clamp/Sleeve (a) 708 Permanent Field Repair Using Full Encirclement Weld Sleeve 709 Inspection and Testing of Relief Devices (Compressor Stations, Meter Stations, Regulating Stations) 710 Inspect/Test Compressor Station Remote Shutdown Devices (ESD/EBD) (a) (a) (b) Oral (c) 711 Inspect, Test, and Maintain Systems (c) (b)(1) (b)(1) 712 Programmable Logic lers (c) (b)(1) (a) 713 Test/Maintain Gas Detection and Alarm Systems (c) 714 Inspect and Maintain Pressure ing and Regulating Devices 715 Test and Maintain Pressure Switches and Transmitters in Pressure ing and Regulating Service (a) (b) (a) (b) 716 Inspect, Maintain, and Operate Valves Maintaining Vaults With Pressure Regulating and Pressure ing Equipment 718 Monitoring for Internal Corrosion with Liquid Samples Permanent Field Repair Using Composite Materials (Wrapmaster) 722 Permanent Field Repair Using Composite Materials (Aqua Wrap) 724 Permanent Field Repair Using Composite Materials (PipeWrap A+ / Atlas CFP) ( a ) Page 5 Copyright Veriforce, LLC. All rights reserved. Rev. 38

6 736 Valve (Pneumatic) Actuator/Operator Inspection, Testing and Maintenance 737 Valve (Hydraulic) Actuator/Operator Inspection, Testing and Maintenance 738 Valve (Electric) Actuator/Operator Inspection, Testing and Maintenance Line Stopping Utilizing a Hot Tap Fitting 763 Squeeze Off Plastic Pipe (b) 764 Squeeze Off Steel Pipe (b) BWP9017 Aerial Leakage Survey: Transmission BWP9023 Hardness Testing of Pipe BWP9024 Permanent Field Repair Using Composite Materials (Composi-Sleeve) BWP9025 Joining of Metal Pipe - Compression Couplings (a) No 3 BWP9026 Perform Plastic Fusion Inspection Oral No 1:0 1 BWP9028 Inspect Cathodic Protection Rectifier (b) (c) BWP9029 Inspect Interference Bonds (c) (c) BWP9030 Cathodic Protection Potential Measurement (a) (d)(8) (a) Page 6 Copyright Veriforce, LLC. All rights reserved. Rev. 38