500 Series Hydraulic Power Units Pressures to 3000 psi Flows to 3 gpm
|
|
- Silvester Whitehead
- 5 years ago
- Views:
Transcription
1 Pressures to 3000 psi Flows to 3 gpm Catalog B500/USA November
2 Power Unit Features The hydraulic power units offer you the durability of top quality industrial power units in an economical package. The integral motor, pump, relief and check valves and reservoir provide a complete system lacking only your linear or rotary actuators. These power units are available in a wide variety of configurations. The reversing option enables you to eliminate external directional valves keeping package cost and complexity to a minimum. Daily, these high quality power units are hard at work positioning medical equipment; in drill fixtures and other tooling applications; helping to process food; driving plastic molding equipment, and in packaging, printing and testing equipment. Let them go to work for you. Features Numerous motors up to 2 HP 6 pump sizes - 1 /4 gpm to 3 gpm Externally adjustable relief valves Vertical or horizontal mounting Single direction or bi-rotational Integral locking check valves Reservoirs from 1 /2 to 5 gallons 3,000 psi rating Applications Boat lifts Boat davits Auto lifts Scissors lift tables Dock levelers Test fixtures Industrial oven doors Conveyor height adjusters 12
3 Circuits P T P T RV RV "W" CIRCUIT "N" CIRCUIT P A B HPRV LPRV RV "R" CIRCUIT "S" CIRCUIT A B HPRV LPRV "L" CIRCUIT 13
4 Performance Data 350 (5.7) Power 1725 RPM 700 (11.4) Power 3450 RPM 300 (4.9) (9.8).69 Output Flow - CIPM (lpm) 250 (4.1) 200 (3.3) 150 (2.5) 100 (1.6) Output Flow - CIPM (lpm) 500 (8.2) 400 (6.6) 300 (4.9) 200 (3.3) (.82) (1.6).15 0 (34) (69) (103) (138) (172) (207) Operating Pressure - PSI (bar) 0 (34) (69) (103) (138) (172) (207) Operating Pressure - PSI (bar) Motor Horsepower Recommendations at Flow/Pressure Pump Nominal GPM Pressure /4 1/3 HP 1/3 HP 1/3 HP 1/3 HP 1/2 HP 1/2 HP 15 1/2 1/3 HP 1/3 HP 1/2 HP 3/4 HP 1 HP 1 HP 27 1/2 1/3 HP 1/3 HP 1/2 HP 3/4 HP 1 HP 1 HP /3 HP 3/4 HP 1 HP 1 1 /2 HP 2 HP 2 HP 41 3/4 1/3 HP 1/2 HP 3/4 HP 1 HP 1 1 /2 HP 1 1 /2 HP /2 1/2 HP 1 HP 1 1 /2 HP 2 HP /3 HP 3/4 HP 1 HP 1 1 /2 HP 2 HP 2 HP /4 HP 1 1 /2 HP 2 HP /4 1/2 HP 1 HP 1 1 /2 HP 2 HP 2HP /2 1 HP 2 HP /2 1/2 HP 1 HP 1 1 /2 HP 2 HP HP 2 HP Note: Performance data is reference only. 14
5 Technical Information Dimensions 6.50 (165.1) Ø 6.12 (155.6) 7.19 MAX (182.6) Ø 1/2" CONDUIT SIZE 3.50 (88.9) 4.56 (115.9) 5.38 (136.5) 1 /2, 1, 1 1 /2 Gallon Reservoir 4.50 (114.3) 5.25 MAX (133.4) 4.25 MIN (108.0) 4.50 (114.3) 3.00 (76.2) 2.56 (65.1) MOTOR HEIGHT 8.00 MIN (203.2) MAX (317.5) SINGLE PHASE ONLY LEADS 18 GA 24" LONG STRIPPED ENDS 1.00 (25.4) 4X.34 SLOT 2.00 (50.8) (304.8) 1 GALLON 7.00 (177.8) 1/2 GALLON TWO WAY VALVE (OPTIONAL) FILLER/BREATHER 9/16-18 UNF-2B SAE -6 PORT (406.4) 1-1/2 GALLON 3 (98.4) 4.94 (125.4) Note: All dimensions in inches (mm). Ø 5.62 (142.9) 5 Gallon Reservoir 4.50 (114.3) 5.25 MAX (133.4) 4.56 (115.9) 5.38 (136.5) 3.50 (88.9) 6.50 (165.1) Ø 6.12 (155.6) 7.19 MAX (182.6) Ø 1/2" CONDUIT SIZE FILLER /BREATHER 2.31 (58.7) 1.00 (25.4) (45.0) (50.8) SINGLE PHASE 9/16-18 UNF-2B ONLY SAE -6 PORT 2.50 (63.6) MOTOR HEIGHT (203.2) 8.00 MIN (317.5) MAX 4X.34 SLOT 3.00 (76.2) 2.56 (65.1) 4.25 MIN (108.0) 4.50 (114.3) MAX 12.19±.03 (309.6±.8) 1.38±.03 (34.9±.8) 2X 1/2-14 NPT 1.38±.03 (34.9±.8) OPPOSITE SIDE 15.25±.03 (387.4±.8) 2.0 (51) 12.0 (305) 2.0 (51) OPPOSITE SIDE 15
6 Technical Information Standard Product Ordering Code Power Unit Motor Code * * = None Motors Induction type - 60 cycle Dual voltage 115/230 1 Ø Dual voltage 230/460 3 Ø H.P. RPM Phase Open TEFC Code Code 1/ OA TA 1/ OB TB 1/ OG TG 1/ OH TH 1/ OC TC 1/ OD TD 1/ OM TM 1/ OT TT 3/ OE TE 3/ OF TF 3/ ON TN 3/ OU TU OJ TJ OK TK OP TP OW TW 1 1 / OL TL 1 1 / OO TO 1 1 / OQ TQ 1 1 / OX TX OR TR OS TS OY TY Pump Size 15 =.038 CIPR 27 =.070 CIPR 41 =.104 CIPR 55 =.139 CIPR 69 =.173 CIPR 80 =.201 CIPR Reservoir Size 05 = 1/2 Gallon 10 = 1 Gallon 15 = 1 1 /2 Gallon 50 = 5 Gallon Options N = None D = Sight Level Gauge Mounting V = Vertical H = Horizontal Circuit Type L = Reversible Locking R = Reversible W = Single Direction with Check N = Single Direction S = W with Solenoid Release Valve (specify voltage and N.O. or N.C.) Specify settings of relief valves. Reversible units have two R/V s and require two pressure settings. Consult factory if a special motor is required. Hydraulic Fluid ATF, OD18, or other clean hydraulic oil with a viscosity of 150 to 300 SUS at 100 F is acceptable. If another type of fluid is needed, please consult the factory. Temperature Range Normal operating range is +20 F to +140 F. Please review your application with the factory for uses below +20 F and over +140 F. Note: Specifications subject to change without notice. 16
550 Series Hydraulic Power Units. Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm)
Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm) 19 Power Unit Features We are pleased to introduce our new C hydraulic power units. The combines the features and benefits our customers and markets
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationSeries OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
More informationkysimply Unique Unique 7000 Series Y-Body
. kysimply Unique ky Unique 7000 Series Y-body General Information The Unique 7000 Series is an innovative new generation of Tri-Clover single seat valves that are designed to meet the highest process
More informationTransporter Current Flow Diagram No. 8 / 1 Edition
Side 1 av 18 Transporter Current Flow Diagram No. 8 / 1 Edition 10.1997 Transporter - Base equipment From January 1996 For alternatives to relay and fuse positions as well as multi-pin connector wiring
More informationkysimply Unique Unique 7000 Series
. kysimply Unique ky Unique 7000 Series General Information The Unique 7000 Series is an innovative new generation of Tri-Clover single seat valves that are designed to meet the highest process demands
More informationNew Fixed Displacement Industrial Hydraulic Power Packs
New Fixed Displacement Industrial Hydraulic Power Packs Designed for Industrial Applications... Delivered in Minimal Time... Standard Features: Pressures up to 3000 PSI Flow: 0.4 to 10 GPM Fixed displacement
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationWORKING TOGETHER FOR A BETTER SOLUTION ELECTRIC MOTORS C FLANGES - DIRECT MOUNT & AC/DC - POWER UNITS HCHYDROCUSTOM.COM
WORKING TOGETHER FOR A BETTER SOLUTION ELECTRIC MOTORS C FLANGES - DIRECT MOUNT & AC/DC - HCHYDROCUSTOM.COM ELECTRIC MOTORS ELECTRIC MOTORS TEFC MOTORS CHOICE OF 1/3 TO 20HP 1800 RPM (3600 RPM AVAILABLE)
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 145-146 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WD WD (All Series) whitedriveproducts overview The WD motor series is an economical solution for light duty
More informationPower closing assist,
No. 3/ Power closing assist, from June 003 Note: Information for Relay and fuse arrangements Connector arrangements Control odules and Relays Ground connections Component Locations! No. 3/ B40 B3 B40 B399
More informationEuroVan No. 1/1. Wiring diagram. Deviate relay location and fuseplacements as well as the locations of multiple connectors see section component
EuVan No. / EuVan - Standard Equipment fm December 000 Deviate relay location and fuseplacements as well as the locations of multiple connectors see section component locations. 4 6 7 TK m. L. KL K KL
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
SERIES 0-1 - LIHT DUTY Hydraulic Motor RS RS (ll Series) For Light Duty pplications Overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech.
More informationSeries 4SH 4SH Standard 18 Frame HP, 3450RPM
7.5-10 HP, 3450RPM MODEL PART NO. 4SHVA75N2 133650 4SHVA7552 133651 4SHVA100N2 133652 4SHVA10052 133653 Manual: 133030 4SHVB75N2 133655 4SHVB7552 133656 4SHVB100N2 133657 4SHVB10052 133658 1 2-10 HP, 1750RPM
More informationMonarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category.
Monarch D.C. Hydraulic Power Systems MODEL M-319 Description: Pump/Motor/Reservoir/Valve Check Valve 2-Way/2-Position Normally Closed Solenoid Operated Lowering Valve Externally Adjustable Relief Valve
More informationws = white sw = black ro = red br = brown bl = blue gr = grey 267 li = lilac ge = yellow or = orange B110 rs = pink R51
New Beetle Wiring Diagram No. 20 / 2 Door control module (driver side), left front window switch, switch for window regulator front right (driver), switch for interior lock (driver side) E40 - Left Front
More informationZ SERIES Z22 TECHNICAL SPECIFICATIONS. Hydraulic Pump/Motor Product Group Roller Bearing Design
Z SERIES Hydraulic Pump/Motor Product Group Roller Bearing Design Z22 TECHNICAL SPECIFICATIONS Replacement parts for industry common pump/motor series. Assemblies are built to match your replacement or
More information8 to 10 threads chamfered for easy thread starting in tough material.
TAPER 8 to 10 threads chamfered for easy thread starting in tough material. NC = National Course NF = National Fine PLUG BOTTOM 3 to 5 threads chamfered for general use when tapping to bottom of hole is
More informationTaking Hydraulic System Reliability To A Higher Level
Taking Hydraulic System Reliability To A Higher Level Hydraulic Filtration Product Line PureForce Product Line Provides Superior Protection With increased demands on today s hydraulic systems, maintaining
More informationRexroth Power Packs. Features and Benefits RA / Fixed displacement. Designed for Industrial Applications.
Rexroth Power Packs Fixed displacement. Designed for Industrial Applications. Pressure: Up to 3000 PSI Flow: 0.4 to 10 GPM Tank Capacities: 2.5 to 20 gallon Features and Benefits Factory Built Units The
More informationRexroth Power Packs. Features and Benefits RA / Fixed displacement. Designed for Industrial Applications.
Rexroth Power Packs RA 51 300/03.04 1/8 Fixed displacement. Designed for Industrial Applications. Pressure: Up to 3000 PSI Flow: 0.4 to 10 GPM Tank Capacities: 2.5 to 20 gallon Features and Benefits Factory
More informationStandard Power Packs Variable Displacement
Standard Power Packs Variable Displacement Designed for Industrial Applications... Delivered in Minimal Time... Standard Features: Pressures up to 000 PSI max. Flow: 4.2 to 1 GPM Variable displacement
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationSeries: SE (Standard) & 3SE-L
www.cranepumps.com Series: SE (Standard) & 3SE-L SE: SE51 104871 SE51A 104872 SE51AU 104873 SE52 104874 SE52AU 104875 SE594L 104881 SE544L 104882 SE554L 104883 SE774L 104884 SE794L 104885 SE744L 104886
More informationSeries: SE (Standard) & 3SE
www.cranepumps.com Series: SE (Standard) & 3SE SE Standard: SE51 086040 SE51A 086041 SE51AU 090623 SE52 086042 SE52A 090626 SE52AU 090627 3SE: 3SE514L 086051 3SE524L 086052 3SE594L 086053 3SE544L 086054
More informationTransporter Current Flow Diagram No. 80 / 1 Edition
Side 1 av 13 Transporter Current Flow Diagram No. 80 / 1 Edition 05.2003 2.5 l/65 kw direct injection turbo diesel, engine code AJT From May 1999 2.5 l/75 kw direct injection turbo diesel, engine codes
More informationSeries 2SEV-L & 3SEV-L 2" & 3" NPT Discharge - Submersible Sewage Ejectors.5,.75 & 1.0HP, 1750 & 3450RPM
2SEV-L, 1750RPM 2SEV514L 104918 2SEV524L 104919 2SEV594L 104920 2SEV544L 104921 2SEV554L 104922 2SEV724L 104928 2SEV794L 104929 2SEV744L 104930 2SEV754L 104931 2SEV1024L 104936 2SEV1094L 104937 2SEV1044L
More information5.2 to 79 gpm 3000, 3600, 5000 psi
Modular Valve Series Modular Valve Series. to 79 gpm 000, 600, 000 Overview The modular valve is designed and engineered to integrate multiple hydraulic valve operations into a single unit, which eliminates
More informationDMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull
More informationCatalog Little Champ Hydraulic Power Units
Catalog Little Champ Hydraulic Power Units 3 AND 5 Gallon Capacity General Specifications/Table of Contents Little Champ Power Units are designed for use in locations where space is limited and larger,
More informationRemote Temperature Controllers. Quick Selection Guide
Remote Temperature Controllers Quick Selection Guide A Complete Selection For A Wide Range Of Applications Electronic Standalone Controllers T775 Provide on/off, modulating, or reset control in applications
More informationAudi A4 Current Flow Diagram No. 111 / 1
Page 1 of 9 Audi A4 Current Flow Diagram No. 111 / 1 CAN bus wiring from model year 2006 Notes: For information concerning Edition 10.2006 Position of relays and fuses Multi-pin connections Control units
More informationPressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
More information12AT/50AT Series Spin-On Filters
1 Applications for Mobile Equipment Hydrostatic Drives Industrial Power Units Reservoir Breathers Often, economic conditions dictate what type of filter is used on a piece of equipment. When costs are
More informationCatalog Power Unit Accessories
Catalog Power Unit Accessories Features Continental Hydraulics offers a wide range of accessories that can be either mounted on the power unit, or purchased seperately. Everything from filters and gauges
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 275-276 - 277-278 - 280-281 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WG WG (ll Series) For Light Duty pplications whitedriveproducts overview The White Drive
More informationCatalog Power Unit Accessories
Catalog Power Unit Accessories Features Continental Hydraulics offers a wide range of accessories that can be either mounted on the power unit, or purchased seperately. Everything from filters and gauges
More informationEuroVan No. 73/1. Wiring diagram. 2.8L - Engine - Motronic Multiport Fuel Injection (MFI)/103 kw, code AES
EuVan No. 7/ Automatic transmission fm September 998.8L - Engine - Motnic Multiport Fuel Injection (MFI)/0 kw, code AES Deviate relay location and fuseplacements as well as the locations of multiple connectors
More informationHYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta
More informationCatalog Little Champ Hydraulic Power Unit Kits
Catalog Little Champ Hydraulic Power Unit Kits Table of Contents Continental Hydraulics Little Champ Power Unit Kits can be assembled at your facility, and at your convenience. You save time and money.
More informationF/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump
f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with
More informationEquipment Coll-O-Crimp Pumps
s T-402-2 Air/Hydraulic For use with T-400-1. (Some models have air port on right side) that a filter, regulator, lubricator and air pressure gauge be installed in the air line as close as possible to
More informationHydraulic Motor & Brake
SERIES 500-501 - 510-511 - 520-521 - 530-531 - 50-51 - MEDIUM DUTY Hydraulic Motor & rake RE RE (ll Series) For Medium Duty pplications Overview series descriptions RE Series motors offer the perfect compromise
More information12AT/50AT Series. Spin-On Filters. Global Filtration Technology
1AT/5AT Series Spin-On Filters Global Filtration Technology 1 1AT/5AT Series Applications for Spin-On Filters n Mobile Equipment n Hydrostatic Drives n Industrial Power Units n Reservoir Breathers Often,
More informationBent Axis Piston Motor, Fixed, Bi-directional Series: MFBP...1
Features 40 bent axis piston motor for high power and small overall dimensions Bi-directional rotation Rotation speed up to 8800 rpm Torque up to 840 Nm ( 619 ft-lbs) Side or rear port locations available
More informationOperating Instructions & Parts Manual
Operating Instructions & Parts Manual Grainger Part No. 36NE08 Bucher Hydraulics Part No. M-3504-0239 Please read the instructions carefully and always operate this equipment in a safe manner. Unit Description:
More informationPNEUMATIC RACK & PINION ACTUATOR
PNEUMATIC RACK & PINION ACTUATOR Automax S-Series DOUBLE ACTING SPRING RETURN 1 Integral travel stops in both directions with 10 degrees of overtravel to assure precise adjustment of both the open and
More informationGPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198
Transmission & Brake Spool Valves Screw-in style GPM PSI LPM BAR MODEL CAVITY PAGE 2 1000 8 70 TC-S3A 5/8-18 186 6 1000 23 70 TF-S3A 7/8-14 188 6 1000 23 70 TF-S3D 7/8-14 190 5 1000 20 70 TG-S4A 7/8-14
More informationF SERIES GEAR PUMP. 2 Muncie Power Products, Inc Muncie Power Products, Inc.
ALL NEW DESIGN F SERIES GEAR PUMP ALL NEW DESIGN Ultimate power and performance in a small package best describes the all new F Series gear pumps. Designed exclusively for those low flow applications.
More informationD/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
More information400 psi (28 bar) PDI & INJ. 100 psi (7 bar) PDI & INJ
Airmatic Lubricator Pneumatic Operation, Oil General The Airmatic lubricator is a simple economical unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is
More informationCondensed Catalog. Seal-less Pumps
Condensed Catalog Seal-less Pumps Hydra-Cell F/M/D/H Series Seal-less Pumps Hydra-Cell T and Q Series Pumps Hydra-Cell P Series Seal-less Metering Pumps Due to the Wanner Engineering Continuous Improvement
More information3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO
Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In
More informationBOSS Series D Control Valve
Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as
More informationHYDRAULIC COMPONENTS
MAIN INDEX HYDRAULIC COMPONENTS TABLE OF CONTENTS (1) Hydraulic Pumps Page 3 (2) Hydraulic Motors Page 29 (3) Hydraulic Flow Dividers Page 35 (4) Pump-Motor Combinations Page 47 (5) Pump-Motor-Tank Combinations
More informationD/G-04 Series. Up to 3.0 gpm (11.3 l/min)
D/G-4 Series Up to 3. gpm (11.3 l/min) 42 United States Instant Information: United Kingdom D/G-4 Series Performance flow max max flow input model gpm l/min rpm D/G-4-X 2.9 11. 175 D/G-4-E 2.1 7.8 175
More informationSealed Enclosures. Contact Blocks. Multiple Actuators
Contact Blocks Both N/O & N/C contact blocks and combinations of each are available for the Standard and Heavy Duty ranges of Emergency Stop Switches. Sealed Enclosures All Standard and Heavy Duty range
More informationFill cap with inlet strainer (40 mesh) Automatic approved quick connect inlet (no strainer)
GPO ubricator Motor-driven gear pump, Oil General The GPO ubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors
More informationPumps & Motors GRESEN INDEX
Pumps & Motors GRESEN INDEX Series Overview......................156-157 Pump and Motor Displacement Chart...158-159 General Product and Safety Information.....160 Torque Requirements & Overhang Data......161
More informationDirectional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
More informationGEORGIAN EQUIPMENT LTD.
GEORGIAN EQUIPMENT LTD. A COMPREHENSIVE SELECTION OF HIGH QUALITY HYDRAULIC PRODUCTS For more information 705-325-3431 E Electric Motor Pump Adaptors - PAE Series 5 F Filler Breathers - FB Series 15 Filter
More informationAS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6
AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure
More informationWash Down Little Champ Hydraulic Power Units
Wash Down Little Champ Hydraulic Power Units Whats The Purpose of a Wash Down Little Champ Power Unit? * Provide a Power Unit Base For Food Industry Or Other Similar Applications That Require Pressurized
More informationLow Pressure Filters. Low Pressure Filters LOW PRESSURE FILTERS
Low Pressure Filters Low pressure filters are the most common type of filter found in hydraulic circuits used most often in return line applications. Low Pressure Filters Donaldson low pressure filters
More information4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
RA 183-52/1.11 1/1 4/3 4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections B8_8 (EDBZ) Summary Description Page General specifications 1 Ordering
More informationANTI-SHOCK DIRECTIONAL CONTROL VALVES
ACTUATED, DIRECT OPERATED TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit)
More information4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service 4/2 and 4/3-Way Proportional Directional Control Valve Direct Operated Model 4 WRA(E)B Size 6 Series 1X
More informationHydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control
Hydraulic Screw-in Cartridge Valves (SiCV) Proportional valves Proportional solenoid valves for pressure and flow control Proportional valves PROPORTIONAL VALVES... - PFRH... -8 EPV...- EPV6...- EPV6A...-7
More informationDelivering power from source to actuation Choose from a wide range of systems!
Eaton Vickers Hydraulic Power Units Product Selection and Programs Guide Delivering power from source to actuation Choose from a wide range of systems! Whatever the industry, Whatever the application.
More information4-Way Directional Control Valve With Hydraulic Kick Out
Engineering & Manufacturing Solutions 4-Way Directional Control Valve With Hydraulic Kick Out Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 5-1/2 lbs. (2.5 kg) 30
More informationADAPTER GEAR ASSEMBLIES
ADAPTER GEAR ASSEMBLIES PARTS LIST AND SERVICE MANUAL Adapter Gear Assemblies are normally used to reverse rotation of the PTO output shaft and to clear mounting obstructions. Standard adapters will move
More informationFEATURES SPECIFICATIONS
RS 1 FETURES 2 3 1 High Pressure Viton Shaft Seal offers superior seal life and performance and eliminates the need for case drain. 2 Pressure Fed earing surface receives positive flow of clean, cool oil.
More informationSolenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
More information4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)
4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating
More informationEaton. Revised April, Directional Control Valves. Model 30540, 15 GPM Directional Control Valves. We Manufacture. Solutions
s Eaton Revised April, 1996 c Directional Control Valves h i y d l ydraulics r a u u l c a i d r s Model 354, 15 GPM Directional Control Valves Solutions y We Manufacture H S o l u t i o n s Model 354
More informationOildyne. Miniature Piston Pumps 5 Piston Design. Pressures to 276 bar (4000 psi) Displacements from.156cc/rev to.865cc/rev (.01 to.
Oildyne 5 Piston Design Pressures to 276 bar ( psi) Displacements from.156cc/rev to.865cc/rev (.1 to.5 in 3 /rev) 29 Features Pumping Efficiencies to 9% Allow You to Effectively Use.156 to.865 cc Flow
More informationModuflow. ILP and RFP Low Pressure Filters. Series
Moduflow ILP and RFP Low Pressure Filters Series 27 Applications for Moduflow Filters Power Unit Fabrication Off-line Filter Loops Mobile Equipment The Moduflow filter is widely considered the most versatile
More informationMB SERIES SMB SERIES MINIATURE TANK BREATHERS MINIATURE TANK BREATHERS ACCCESSORIES. Phone (608) Fax (608)
G1 MB SERIES MINIATURE TANK BREATHERS 10 Micron Filtration (Nominal) Shatter Resistant Plastic Construction Temperatures Up to +225 F Model A B Number Thread Size Overall Height MB-02-10 1/4 NPT 1.8 MB-03-10
More informationDANFOSS. Thermostatic Expansion Valves. Nominal Capacity Ranges in TR for Range N -40 to 50 F R-12 R-22 R-410A R-134A R-404A/
TYPE TUA(E), TUB(E), TUC(E), T(E)2, TDE, TDEB, TE, TXI 2, AKV Thermostatic Expansion Valves Valve Applications Features Models Nominal Capacity Ranges in TR for Range N -40 to 50 F R-12 R-22 R-410A R-134A
More informationADAPTER GEAR ASSEMBLIES PARTS LIST AND SERVICE MANUAL
ADAPTER GEAR ASSEMBLIES PARTS LIST AND SERVICE MANUAL Adapter Gear Assemblies are normally used to reverse rotation of the PTO output shaft and to clear mounting obstructions. Standard adapters will move
More informationAirmatic Lubricator. Pneumatic Operation, Oil. General. Application. Operation. Technical Data
Airmatic Lubricator Pneumatic Operation, Oil General The Airmatic lubricator is a simple economical unit with a broad range of output. It is designed to be operated with shop air. The stroke setting is
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Model 30540, 15 GPM Directional Control Valves
h y d r a u l i c s H y d r a u l i c s ydraulics Eaton Directional Control Valves We Manufacture No. 11-56 Revised April, 1996 Model 354, 15 GPM Directional Control Valves Solutions S o l u t i o n s
More informationarms Like Us On:
arms 13 www.sternberglighting.com Like Us On: 4 Visit www.sternberglighting.com for more product details and LED updates arms TRADITIONAL ROADWAY CONTEMPORARY Sternberg offers a variety of arms and brackets
More informationRegenerative Turbine Pumps
Bulletin E4 July E4/T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 6 Feet Temperatures to F MTH E4/T4 Series Close-coupled and pedestal mounted regenerative turbine pumps represent the
More informationCoolers. OK Series. Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF Cooling Systems Catalog. Applications
OK Series Air Cooled Oil Coolers Hydraulic Symbol OK 1-11 OKF 3-11 OKA 4-6 OKAF 4-6 OKA 8-11 OKAF 8-11 Description The OK Series cooler design uses a axial fan assembly which draws air through the cooler.
More informationSolutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
More informationLarge Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
More informationCONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
More informationSeries 8SH 8SH Standard 21 Frame HP, 1750RPM
www.cranepumps.com 25-30 HP, 1750RPM MODEL PART NO. 8SHDU25044 139471 8SHDU25054 139472 8SHDU30044 139559 8SHDU30054 139560 Manual: 125508 1 7.5-20 HP, 1150RPM www.cranepumps.com MODEL PART NO. 8SHDU75N6
More informationSection 9: Centralized Lubrication Systems
ALEMITE LUBRICATION EQUIPMENT AND FLUID HANDLING PRODUCTS Oil Mist Systems Introduction Alemite Oil Mist Systems are used to service all types of machine elements that require continuous lubrication, such
More informationProportional Valves. Proportional solenoid valves for pressure and flow control
Proportional Valves Proportional solenoid valves for pressure and flow control EATON Vickers Screw-In Cartridge Valves V-VLOV-MC-E4 September, 7 - Electro- Proportional Valves Section Contents Typical
More informationCROSS HYDRAULICS PTY LTD SECTION
OVERVIEW The motor series is an economical alternative to more complex geroler designs that still provides high efficiency across a wide performance range. These motors are intended for medium-duty applications
More informationP.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
More informationMICROPUMP MAG-DRIVE GEAR PUMPS
MAG-DRIVE GEAR PUMPS REVISION # 1 DATE: 6-6-6 WETTED MATERIALS Pump housings: 316 stainless steel. Gears: PEEK. Gear shafts: 316 stainless steel. Gear shaft bearings: PEEK. Driven magnet: Totally encapsulated
More informationOil Coolers New DCS Dual Fan models for 45HP and 60HP cooling performance
DC/DCS Oil Coolers New DCS Dual Fan models for 45HP and 60HP cooling performance All DC/DCS and Dual Fan models available with internal pressure bypass DC Motor Driven Cooling Fans Are A Low Cost Solution
More information/2. Hot Water and Steam Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT ^ % )
888-87-6711 Normally Closed or Normally Open ot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT Features ot water service to 210 psi differential @ 210 F; sevice to 125 psi differential
More informationCheck valves Direct and pilot operated check valve functions for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Check valves Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Check valves CHECK VALVES... -4 FPR -
More information1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1
1.56 L INEAR A CTUATORS: AIR C YLINDERS A IR C YLINDER Auto switch sensing optional s Ø4, 5, 63, 8, 1 Non-rotating piston rod & double rod types available Ultra low friction, maximum 5% Long life, high
More informationNo.of Cyl. Piston Pistonring Piston Pin Head Part's No. Stock No. Model Cyl. Dia. Comp.Dist. Length Comp. Oil Dia x Length Type TOYOTA
T7050 1E 4 70.5 28-1.0 56 2 x 1.5 1 x 3.0 18.0 x 59 223 13101-10033 -4.7 T72 2K 4 72 36 72 2 x 2.0 1 x 4.0 18.0 x 58 1 13101-12010 T7210 3SZ-VE 4 72 28-6.7 45.5 2 x 1.2 1 x 2.0 18.0 x 53 81 13101-BZ100
More information