DANFOSS. Thermostatic Expansion Valves. Nominal Capacity Ranges in TR for Range N -40 to 50 F R-12 R-22 R-410A R-134A R-404A/
|
|
- Rodger Bridges
- 6 years ago
- Views:
Transcription
1 TYPE TUA(E), TUB(E), TUC(E), T(E)2, TDE, TDEB, TE, TXI 2, AKV Thermostatic Expansion Valves Valve Applications Features Models Nominal Capacity Ranges in TR for Range N -40 to 50 F R-12 R-22 R-410A R-134A R-404A/507 TUA(E) TUB(E) TUC(E) T(E)2 TDE TDEB TE AKV TR6 Supermarket Cases Walk-In-Coolers Residential A/C Ice-Machines Heat Pump Transport Refrigeration Food Dispensers Supermarket Cases Walk-In-Coolers Residential A/C Commercial HVAC Ice-Machines Heat Pump Transport Refrigeration Food Dispensers Supermarket Cases Walk-In-Coolers Residential A/C Commercial HVAC Ice-Machines Heat Pump Transport Refrigeration Food Dispensers Interchangeable orifice, Bi flow, Stainless Steel body/cap tube/bulb, Adjustable Superheat Bi flow, Stainless Steel body/cap tube/bulb, Adjustable Superheat Bi flow, Stainless Steel body/cap tube/bulb, Non- Adjustable Superheat Supermarket Cases Interchangeable Walk-In-Coolers orifice, available Residential A/C Ice- with or w/o Machines Heat Maximum Operating Pump Transport Pressure (MOP), Refrigeration Food Adjustable Dispensers Superheat Commercial HVAC Heat Pump Transport Refrigeration Commercial HVAC Heat Pump Transport Refrigeration Commercial HVAC Heat Pump Transport Refrigeration Supermarket Cases Walk-In-Coolers Ice-Machines Residential A/C High capacity capability, Bi flow, available with or w/o Maximum Operating Pressure (MOP), adjustable superheat Balanced Port, High capacity capability, Bi flow, available with or w/o MOP, Adjustable Superheat Take a part valve, High capacity capability Electronic expansion valves Optimized for split system A/C & Heat Pump TE 5 TE 12 TE 20 TE 55 AKV 10 AKV Body Type Straightway Angleway/ Straightway Angleway/ Straightway Angleway Pressure Equalization Internal/ External Internal/ External Internal/ External Internal/ External Straightway External Straightway External Angleway/ Straightway Straightway Straightway Straightway Angleway Straightway Straightway External External External External Internal Internal Internal Sensor & Transducer SAE X SAE 3/8 X 1/2 1/2 X 5/8 Connections SAE X ODF 3/8 X 1/2 ODF X ODF 1/4 X 3/8 1/4 X 1/2 3/8 X 3/8 3/8 X 1/2 1/2 X 5/8 1/4 X 3/8 1/4 X 1/2 3/8 X 3/8 3/8 X 1/2 1/4 X 3/8 1/4 X 1/2 3/8 X 3/8 3/8 X 1/2 1/4 X 1/2 3/8 X 1/2 3/8 X 5/8 1/2 X 5/8 1/2 X 7/8 5/8 X 7/8 5/8 X 7/8 5/8 X 1-1/8 7/8 X 1-1/8 7/8 X 1-3/8 1-1/8 X 1-3/8 1/2 X 5/8 1/2 X 7/8 5/8 X 7/8 7/8 X 1-1/8 3/8 X 1/2 1/2 X 5/8 171
2 THERMOSTATIC EXPANSION VALVES UNIVERSAL TR 6 KIT FOR AIR CONDITIONING Upgrade for energy savings Patented, internal check valve For Air Conditioning and heat pump systems A complete it easily retrofit existing systems 3 connection options in every kit o 3/8 x 3/8 ODF o Chatleff o Aeroquip Adjustable superheat Anti-hunt sensing bulb Stainless Steel power head, laser welded Stainless Steel cap tube resists vibration R-22 and R-410A versions Kit includes: Valve body with 3/8 x 3/8 ODF connections Chatleff and Aeroquip adapters Built-in check valve for heat pumps 35 foam insulating tape PATENTED easy secure copper bulb strap Instructions Refrigerant R410-A R-22 System Capacity (TR) Danfoss Connections Included in Kit Code 3/8 x 3/8 ODF Chatleff Aeroquip 3 067L5955 X X X 4 067L5956 X X X 5 067L5957 X X X 1,1.5,2 067L5856 X X X 2.5,3 067L5857 X X X 3.5,4 067L5858 X X X 5,6 067L5859 X X X Adjustable Superheat Equilization line: 24 with flarenut: capillary tube: 31.5 Connections: 3/8 x 3/8 ODF, Aeroquip and chatleff adapters supplied INTRODUCTION: Range 1/6 to 4-1/2 tons (R22) Thermostatic expansion valves, type T2 and TE2 regulate the flow of refrigerant liquid into evaporators. Injection is controlled by the refrigerant superheat. T2 valves are especially suitable for liquid injection into dry evaporators where the superheat at the evaporator outlet is proportional to the evaporator load. P332B FEATURES: Large temperature range Equally applicable to freezing, refrigeration, and air conditioning applications. Interchangeable orifice assembly Easier stocking Easy capacity matching Better service Patented double contact bulb Fast and easy to install Good temperature transfer from pipe to bulb Valves for special temperature ranges can be supplied. 5 ft. long capillary tube Can be supplied with MOP (Max. Operating Pressure) Protects the compressor motor against excessive evaporating during normal operation pressure 172
3 ORDERING Components with Flare x Flare Connections Thermostatic element and valve body with bulb strap (without orifice and filter) Refrigerant Valve Type Pressure Equalization 1) Capillary Tube (ft) Connection Inlet x Outlet (in. x in.) Range N 40 to +50 F Without MOP With MOP Range NM 40 to +25 F With MOP PART NO. Range NL 40 to +5 F With MOP Without MOP Range B 75 to 15 F With MOP R-22 R-134a TX 2 Int. 5 3/8 x 1/2 068Z Z Z Z Z Z3228 TEX 2 Ext. 5 3/8 x 1/2 068Z Z Z Z Z Z3229 TN 2 Int. 5 3/8 x 1/2 068Z Z Z Z3369 TEN 2 Ext. 5 3/8 x 1/2 068Z Z Z Z3370 R-404A/ TS 2 Int. 5 3/8 x 1/2 068Z Z Z Z Z Z3410 R-507 TES 2 Ext. 5 3/8 x 1/2 068Z Z Z Z Z Z3411 1) Externally equalized connections are 1/4 in. flare. Orifice Assembly with Filter Rated capacity in nominal tons (TR) Range N: 40 to +50 F PART NO ORIFICE SIZE R-22 R-407C R-134a R-404A/R-507 R-22 R-404A/R X Rated capacity is based on: Evaporating temperature Condensing temperature Refrigerant liquid temperature ahead of valve te = +40 F for range N and te = 20 F for range B tc = +90 F tl = +80 F 173
4 TYPE TUA/TUAE TUA-TUAE Range 1/6 to 41/2 TR (R-22) FEATURES Type TUA/TUAE is available with interchangeable orifice assembly and removable strainer in a straightway design. The valves are offered in rated capacities up to 4.5 TR (R-22) and can be used in a wide range of applications. The TUA/TUAE is made of stainless steel and therefore is especially well-suited to refrigeration systems where aggressive environments exist. The TUA/TUAE has been developed and designed especially for soldering into hermetic refrigeration systems. Removable Strainer- Suitable for use with new POE oils Maximum working pressure MWP=500 PSIG MWPR410A=615PSIG Bi-Flow operation, with flow in opposite direction, the rated capacity is reduced by up to 15%. TUAE Models (Except Orifice 9) can be used for Bi-Flow operation. 174
5 TYPE TUE/TUAE Ordering Thermostatic element and valve body with bulb strap (without orifice and filter) R-22, R-134a, R-404A, R-507 PART NO Refrigerant Valve Type Pressure Capillary Tube (in) CONNECTIONS ODF Range N F Range N F Range B Equalization1) x ODF (in) w/o MOP MOP 60 F F MOP 4 F R-22 TUA Int. 59 1/4 x 1/2 068U U2242 R-22 TUA Int. 59 3/8 x 1/2 068U U2243 R-22 TUAE Ext. 1/4 in. 59 1/4 x 1/2 068U U2244 R-22 TUAE Ext. 1/4 in. 69 3/8 x 1/2 068U U2245 R-134a TUA Int. 59 1/4 x 1/2 068U U2212 R-134a TUA Int. 59 3/8 x 1/2 068U U2213 R-134a TUAE Ext. 1/4 in. 59 1/4 x 1/2 068U U2214 R-134a TUAE Ext. 1/4 in. 59 3/8 x 1/2 068U U2215 R-404A/ R-507 TUA Int. 59 1/4 x 1/2 068U U U2316 R-404A/ R-507 TUA Int. 59 3/8 x 1/2 068U U U2317 R-404A/ R-507 TUAE Ext. 1/4 in. 59 1/4 x 1/2 068U U U2318 R-404A/ R-507 TUAE Ext. 1/4 in. 59 3/8 x 1/2 068U U U2319 Orifice assembly with filter and gasket Rated capacity in tons nominal (TR) 1) ORIFICE NO. RANGE N: -40 to 50 F RANGE B: -60 to -15 F R-22 R-134a R-404A R-507 R-22 R-404A R-507 PART NO U U U U U U U U U U1039 1) According to ARI Rated capacities for range N are based on: Liquid temperature ahead of expansion valve tl = 100 F Evaporating temperature te = 40 F Pressure drop across valve p = 60 psi for R-134a Pressure drop across valve p = 100 psi for R-22, R-404A and R-507. Rated capacities for range B are based on: Liquid temperature ahead of expansion valve tl = 100 F Evaporating temperature te = 40 F Pressure drop across valve p = 100 psi for R-134a Pressure drop across valve p = 150 psi for R-22, R- 404A, R-507C and R-507. Spare Parts Filter (24 pcs): 068U1706 (100 Mesh) (24 pcs): 068U0016 (50 Mesh) Gasket (24 pcs): 068U0015 NOTE: To secure tightness, the orifice gasket must be changed each time the orifice is disassembled. Metric conversions 1 psi = 0.07 bar 5/9 (t1 F 32) = t2 C 1 ton = 3.5 kw 1 in. = 25.4 mm 175
6 TYPE TUB,TUBE INTRODUCTION Type TUB Range 1/4 to 41/2 (R-22) The TU series of thermostatic expansion valves is specifically developed for soldering into hermetic refrigeration systems. TU valves are offered in rated capacities up to 4.5 TR (R-22) and can be used in a wide range of applications. The TU is made of stainless steel and therefore is well-suited to refrigeration systems for aggressive environments and for the food industry. TUB, TUBE Internal (TUB) or external (TUBE) equalization Fixed orifice and strainer Adjustable superheat Angleway body (optional) TUC, TUCE Internal (TUC) or external (TUCE) equalization Fixed orifice and strainer Fixed superheat Angleway body Thermostatic charge options In addition to the standard range, TU is also available with the following range options: Range N: 40 to +50 F MOP +60 F Range NM: 40 to +25 F MOP +32 F Range B 1) 75 to 15 F Range B 1) 75 to 15 MOP 4 F 1) TU valves for range B are not supplied for R-134a. 176
7 TYPE TUB,TUBE ORDERING Angleway Valve Body with 2.6 ft. cap. tube and bulb strap 1) Range N: 40 to +50 F (without MOP) Valve Type TUB TUBE Connec Press. Orifice -tion equal. no. 2) Solder ODF inlet x outlet in. 1/4 x 1/2 3/8 x 1/2 1/4 x 1/2 3/8 x 1/2 Int. Ext. 1/4 in. solder ODF R-22 R-134a R-404A/R-507 R-410A Range N 40 to +50 F Rated Part No. capacity TR 3) Range N 40 to +50 F Rated capacity TR 3) Part No. Range N 40 to +50 F Rated Part No. capacity TR 3) Range N 40 to +50 F Rated Part No. capacity TR 3) U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U U1975 Metric conversions 1 psi = 0.07 bar 5/9 (t1 F 32) = t2 C 1 ton = 3.5 kw 1 in. = 25.4 mm 1) The TUB series is also available with 5 ft. cap. tube. Please contact Danfoss for further information. 2) All TUB and TUBE valves with orifice #9 cannot be used for bi-flow operation. 3) According to ARI Rated capacities for range N are based on: Liquid temperature ahead of expansion valve t1 = 100 F Evaporating temperature te = 40 F Pressure drop across valve p = 60 psi for R-134a Pressure drop across valve p = 100 psi for R-22, R-404A, & R-507 Pressure drop across valve p = 160 psi for R-410A 177
8 MINIMIZER EXPANSION VALVE SERVICE KITS T2 and TE2 Selection Chart for Thermostatic Expansion Valves Choose valve by refrigerant and style, then read down to the required capacity in tons and select orifice. Flare Style Valves (Internally Equalized) Flare Style Valves (Externally Equalized) Sweat Style Valves (Internally Equalized) Sweat Style Valves (Externally Equalized) Orifice No. Part No. (flare) Part No. (sweat) R 12 R 502 R 22 R 134a R 404A TF2 068Z3202 TEF2 068Z3204 TF2 068Z3280 TEF2 068Z3283 TY2 068Z3212 TEY2 068Z3215 TY2 068Z3282 TEY2 068Z3285 TX2 068Z3206 TEX2 068Z3209 TX2 068Z3281 TEX2 068Z3284 Nominal Capacity* TN2 068Z3346 TEN2 068Z3348 TN2 068Z3383 TEN2 068Z3385 TS2 068Z3400 TES2 068Z3403 TS2 068Z3414 TES2 068Z3415 0X /5 1/10 1/ /5 1/5 1/3 1/4 1/ /3 1/3 7/10 1/2 1/ /2 1/2 1 3/4 1/ /2 11/ /2 11/2 21/3 13/4 11/ / /2 3 3 Solder adapters for Sweat Style valves: for 1/4 OD pipe for 3/8 OD pipe * Valve capacity is rated at 40 F evaporating temperature, 90 F condensing temperature, and 80 F refrigerant temperature ahead of valve. Capacity selection charts and a pressure temperature slide rule are included in each kit. Create your own custom kits by ordering the case and your selection of valves separately. 178
9 MINIMIZER EXPANSION VALVE SERVICE KITS T2 and TE2 Service Kit T2 TUA Part No. 00MMKBOX01 00MMKBOX02 Each case contains a valve capacity table. This case does not come with valves and orifices. Choose from five Danfoss Minimizer Service Kits. Each has six expansion valve bodies and a selection of orifices to cover a wide range of capacities for three refrigerants 179
10 MINIMIZER EXPANSION VALVE SERVICE KITS Minimizer-Sweat Select Valve Body and Orifice Size This Kit contains TU type expansion valves which have Sweat (ODF) connections Internally Equalized Valve Bodies Externally Equalized Valve Bodies R 22 R 134a R 404A/R 507 TUA 068U2235 TUA 068U2205 TUA 068U2285 TUAE 068U2237 TUAE 068U2207 TUAE 068U2287 Part No. Orifice size Nominal Capacity (Tons) for 40 to +50 F Range 068U /6 1/8 1/8 068U /4 1/5 1/5 068U /3 1/4 1/4 068U /2 1/3 1/3 068U /4 1/2 1/2 068U /4 3/4 068U / U /2 1-1/2 068U /4 068U / /2 Minimizer-Flare Select Valve Body and Orifice Size. Internally Equalized Externally Equalized R 22 R 134a R 404A/R 507 TX2 068Z3206 TN2 068Z3346 TS2 068Z3400 TEX2 068Z3209 TEN2 068Z3348 TES2 068Z3403 Part No. Orifice size Nominal Capacity (Tons) for 40 to 10 F Range X 1/6 1/10 1/ /3 1/4 1/ /4 1/2 1/ /4 1/ /2 1-1/ /3 1-3/4 1-1/ / /
11 Ordering INTRODUCTION Building on the success of the Minimizer Kit -- every TEV you need - both flare and sweat - in one convenient kit 12 valves and 20 orifices = 105 size combinations from 1/10 to 41/2 TR Cut out unnecessary supply house runs - the right valve is always on the truck Sweat valves have bi-metal connections - no wet wrap required Factory superheat setting - no adjustment after assembly Sizing and selection chart Durable fitted case Easy to refill PART NO PRODUCT 068Z3206 TX2 068Z3209 TEX2 068Z3346 TN2 068Z3348 TEN2 068Z3400 TS2 068Z3403 TES T/E Orifice no. 0X T/E Orifice no T/E Orifice no T/E Orifice no T/E Orifice no T/E Orifice no T/E Orifice no T/E Orifice no U0015 TU Metal Gasket WRENCH Allen Wrench 068U2235 TUA R U2237 TUAE R U2205 TUA R 134a 068U2207 TUAE R 134a 068U2285 TUA R 404A/ U2287 TUAE R 404A/ U1030 TU Orifice no U1031 TU Orifice no U1032 TU Orifice no U1033 TU Orifice no U1034 TU Orifice no U1035 TU Orifice no U1036 TU Orifice no U1037 TU Orifice no U1038 TU Orifice no U1039 TU Orifice no
12 Orifice Selection-I Select Valve Body and Orifice Size Flare. Internally Equalized Valve Bodies Externally Equalized Valve Bodies R 22 R 134a R 404A/R 507 TX2 068Z3206 TN2 068Z3346 TS2 068Z3400 TEX2 068Z3209 TEN2 068Z3348 TES2 068Z3403 Part No. Orifice size Nominal Capacity (Tons) for 40 to +50 F Range X 1/6 1/10 1/ /3 1/4 1/ /4 1/2 1/ /2 3/4 1/ /2 1-1/ /3 1-3/4 1-1/ / /2 3 3 Orifice Selection-II Select Valve Body and Orifice Size Sweat. R 22 R 134a R 404A/R 507 Internally Equalized Valve Bodies TUA 068U2235 TUA 068U2205 TUA 068U2285 Externally Equalized Valve Bodies TUAE 068U2237 TUAE 068U2207 TUAE 068U2287 Part No Orifice size Nominal Capacity (Tons) for 40 to +50 F Range 068U /6 1/8 1/8 068U /4 1/5 1/5 068U /3 1/4 1/4 068U /2 1/3 1/3 068U /4 1/2 1/2 068U /4 3/4 068U / U /2 1-1/2 068U /4 068U / /2 182
13 TYPE TDE & TDEB (R22) INTRODUCTION TDE Range 3 7 1/2 TR TDEB Range 8 40 TR The TDE series of thermostatic expansion valves is designed for use in: Air conditioning systems Heat pumps Water chillers Refrigerated containers Traditional refrigeration systems The TDE product programs consist of two hermetic valve designs: Single port (type TDE) and balanced port (type TDEB).Valve selection is determined by the application and the capacity required. Single port version (type TDE) The single port s simplified construction is designed for use on systems with small capacities (3 to 7.5 TR R 22). Single port design is effective because in smaller capacities condensing pressure is negligible. Type TDE single port valves can also be used for bi-flow applications in the same capacity range. Balanced port versions (type TDEB) The balanced port design has been developed for large capacity systems (greater than 8 to 40 TR) where fluctuating condensing pressures are present. The balanced port feature eliminates any influence by condensing pressure on the expansion valve function in the normal flow direction. The TDEB design is unique in that it also provides a balance function in the reverse flow direction making it ideal for use in biflow applications. All TDE valves are available with a selection of bulb charges with or without maximum operating pressure (MOP) function. Single and industrial pack quantities are available. 183
14 TYPE TDE & TDEB (R22) IDENTIFICATION Essential valve data is given on the element label. TDEX = Type (X: refrigerant R 22) 8 TR = Rated capacity Qnom..in Tons of Refrigeration 28 kw = Rated capacity Qnom. in kw R 22 = Refrigerant 25/+10 C = Evaporating temperature range ( C) 15/+50 F = Evaporating temperature range ( F) 068H4112 = Code number BP 15 = Bleed 15% MOP 100 = Max. Operation Pressure PB 28 bar/ MWP 400 psig = Max. working pressure 288 = Date marking (week 28, 1998) DIMENSIONS and WEIGHT Type TDE TDEB 8-19 TDEB Connection ODF solder Inlet x outlet Capillary Tube length H 1 H 2 H 3 H 4 L 1 L 2 L 3 L 4 L 5 ØD1 ØD2 Weight In. ft In. In. In. In. In. In. In. In. In. In. In. lbs 3/8 5/ /2 5/ /2 7/ /8 7/ /8 7/ /8 1-1/ /8 1-1/ /8 1-1/ /8 1-3/ /8 1-3/
15 TYPE TDE & TDEB (R22) Range K = 15 to 50 F with MOP 100 psig. Metric conversions 1 psi = 0.07 bar 5/9 (t1 F 32) = t2 C 1 ton = 3.5 kw 1 in. = 25.4 mm Port Type Type and rated capacity*tr Connection solder ODF x ODF in Part No Multipack TDEX Single port TDEX 3 3/8 x 5/8 068H6200 TDEX Single port TDEX 3 1/2 x 5/8 068H6201 TDEX Single port TDEX 4 1/2 x 7/8 068H6202 TDEX Single port TDEX 6 1/2 x 5/8 068H6234 TDEX Single port TDEX 6 1/2 x 7/8 068H6203 TDEX Single port TDEX 6 5/8 x 7/8 068H6204 TDEX Single port TDEX 7.5 5/8 x 7/8 068H6205 TDEBX Balanced port TDEBX 20 7/8 x 1 1/8 068H7146 TDEBX Balanced port TDEBX 26 7/8 x 1 3/8 068H7148 TDEBX Balanced port TDEBX 30 7/8 x 1 3/8 068H7150 TDEBX Balanced port TDEBX /8 x 1 3/8 068H7152 TDEBX Balanced port TDEBX /8 x 1 3/8 068H7154 TDEBX 8-19 Balanced port TDEBX 8 5/8 x 7/8 068H7130 TDEBX 8-19 Balanced port TDEBX 11 5/8 x 7/8 068H7132 TDEBX 8-19 Balanced port TDEBX 11 5/8 x 1 1/8 068H7134 TDEBX 8-19 Balanced port TDEBX /8 x 7/8 068H7136 TDEBX 8-19 Balanced port TDEBX /8 x 1 1/8 068H7138 TDEBX 8-19 Balanced port TDEBX 16 5/8 x 1 1/8 068H7140 TDEBX 8-19 Balanced port TDEBX 16 7/8 x 1 1/8 068H7142 TDEBX 8-19 Balanced port TDEBX 19 7/8 x 1 1/8 068H7144 * The rated capacity is based on: Evaporating temperature te = 40 F Liquid temperature tl = 80 F Condensing temperature tc = 90 F Range AC = 15 to 60 F with MOP 120 psig. Port Type Type and rated capacity*tr Connection solder ODF x ODF in Part No Multipack TDEX Single port TDEX 3 3/8 x 5/8 068H6100 TDEX Single port TDEX 3 1/2 x 5/8 068H6101 TDEX Single port TDEX 4 1/2 x 7/8 068H6102 TDEX Single port TDEX 6 1/2 x 5/8 068H6134 TDEX Single port TDEX 6 1/2 x 7/8 068H6103 TDEX Single port TDEX 6 5/8 x 7/8 068H6104 TDEX Single port TDEX 7.5 5/8 x 7/8 068H6105 TDEBX Balanced port TDEBX 20 7/8 x 1 1/8 068H7116 TDEBX Balanced port TDEBX 26 7/8 x 1 3/8 068H7118 TDEBX Balanced port TDEBX 30 7/8 x 1 3/8 068H7120 TDEBX Balanced port TDEBX /8 x 1 3/8 068H7122 TDEBX Balanced port TDEBX /8 x 1 3/8 068H7124 TDEBX 8-19 Balanced port TDEBX 8 5/8 x 7/8 068H7100 TDEBX 8-19 Balanced port TDEBX 11 5/8 x 7/8 068H7102 TDEBX 8-19 Balanced port TDEBX 11 5/8 x 1 1/8 068H7104 TDEBX 8-19 Balanced port TDEBX /8 x 7/8 068H7106 TDEBX 8-19 Balanced port TDEBX /8 x 1 1/8 068H7108 TDEBX 8-19 Balanced port TDEBX 16 5/8 x 1 1/8 068H7110 TDEBX 8-19 Balanced port TDEBX 16 7/8 x 1 1/8 068H7112 TDEBX 8-19 Balanced port TDEBX 19 7/8 x 1 1/8 068H7114 * The rated capacity is based on: Evaporating temperature te = 40 F Liquid temperature tl = 80 F Condensing temperature tc = 90 F 185
16 TYPE TRE10, TRE20, TRE40, AND TRE80 INTRODUCTION TRE thermostatic expansion valves have been designed and developed for soldering into air-conditioning and refrigeration systems. Their hermetic tight design meets environmental demands for today and the future. They can be used in systems ranging in capacity from 8 to 70 TR (R 22). The TRE design incorporates a forged brass body with the entire power element, including the capillary tube and bulb, fabricated from stainless steel. The straight through bimetal solder connections are formed from deep drawn stainless steel and copper. The valve incorporates a 2-way balanced port orifice making it ideal for biflow operation. External superheat adjustment is a standard feature on all TRE valves. For non-adjustable OEM versions, a setting assembly is available for field retrofit. Contact Danfoss for further information. FEATURES Bimetal connections waterless soldering quicker installation times higher productivity Developed for R 410A R 22, R 134a, R 410A, R 507 and other fluorinated refrigerants Laser-welded power element longer diaphragm life high pressure tolerance and working pressure Stainless steel power element, capillary tube and bulb high corrosion resistance high strength and vibration resistance fast installation: self-aligning bulb secures with one strap good thermal contact and transmission Two-way balanced port/bi-flow function superheat unaffected by condensing pressure independent of flow direction one valve for heat pump service Stainless steel double contact bulb straightforward and fast installation good thermal contact and heat transfer Adjustable/non- adjustable version Setting spindle assembly can be retrofitted to non-adjustable version 186
17 TYPE TRE10, TRE20, TRE40, AND TRE80 Capillary tube length In addition to the standard program, TRE valves are also available with the following options: Refrigerants - Range - MOP: Contact Danfoss for information regarding different refrigerants and evaporator ranges. Internal bleed: 15% Connections TYPE TRE10 TRE20 TRE40 TRE80 CAPILLARY TUBE LENGTH 3 or 5 ft 3; 5 or 10 ft 5 or 10 ft 5 or 10 ft TYPE INLET ODF SOLDER OUTLET ODF SOLDER TRE10 1/2-5/8-7/8 in. 1/2-5/8-7/8-1-1/8 in. TRE20 5/8-7/8-1-1/8 in. 5/8-7/8-1-1/8-1-3/8 in. TRE40 7/8-1-1/8 in. 7/8-1-1/8-1-3/8 in. TRE80 1-1/8-1-3/8 in. 1-1/8-1-3/8-1-5/8 in. Equalizing connection 1/4" or 6 mm ODF on all types. Sizes in bold type are standard sizes. ORDERING Valve and bulb strap are supplied in mutipack. The numbers supplied are as follows: Type TRE 10 TRE 20 TRE 40 TRE 80 Multipack 12 pcs 8 pcs 6 pcs 4 pcs Capacity TR Overview of product range Refrigerant Range Type Code MOP 8-70 R 22 X K 60 F 8-70 R 22 X N 8-85 R 410A L K 60 F 8-85 R 410A L N 5-56 R 134a N K 60 F 5-56 R 134a N N K: -15 up to +50 N: -40 up to
18 TYPE TRE10, TRE20, TRE40, AND TRE80 R22, R410A REFRIGERANT R22 R410A TYPE RATED CAPACITY Qnom 1) TR RATED CAPACITY Qnom 1) TR CONNECTION ODF SOLDER Inlet Outlet in in RANGE K 15 /+50 F MOP 60 F 25 /+10 C MOP 15 C Part No Multipack 2) N 40 /+50 F 40 /+10 C Part No Multipack 2) TRE10-8X 8 5/8 7/8 067L L1121 TRE10-10X 10 5/8 7/8 067L L1124 TRE20-10X 10 5/8 7/8 067L L1175 TRE X /8 7/8 067L L1179 TRE20-15X 15 7/8 1 1/8 067L L1184 TRE20-20X 20 7/8 1 1/8 067L L1187 TRE20-20X 20 7/8 1 3/8 067L L1188 TRE40-20X 20 7/8 1 1/ TRE40-20X 20 7/8 1 3/ TRE40-25X 25 7/8 1 3/8 067L L3105 TRE40-25X /8 1 3/8 067L L3106 TRE40-30X /8 1 3/8 067L L3109 TRE40-40X /8 1 3/8 067L L3112 TRE80-55X /8 1 3/8 067L TRE80-70X /8 1 5/ TRE10-8L 8 5/8 5/8 067L L1128 TRE10-8L 8 5/8 7/8 067L L1129 TRE10-10L 10 5/8 5/8 067L L1130 TRE10-10L 10 5/8 7/8 067L L1131 TRE L /8 5/8 067L L1134 TRE L /8 7/8 067L L1135 TRE10-15L 15 7/8 7/8 067L L1138 TRE10-15L 15 7/8 1 1/8 067L L1139 TRE20-15L 15 7/8 7/8 067L L1191 TRE20-15L 15 7/8 1 1/8 067L L1192 TRE20-20L 20 7/8 7/8 067L L1193 TRE20-20L 20 7/8 1 1/8 067L L1194 TRE20-25L 25 7/8 1 1/8 067L L1197 TRE20-25L /8 1 1/ L1199 TRE40-25L 25 7/8 1 1/8 067L L3115 TRE40-25L /8 1 3/8 067L L3116 TRE40-30L /8 1 3/8 067L L3119 TRE40-40L /8 1 3/8 067L L3124 TRE40-55L /8 1 1/ L3127 TRE80-55L /8 1 3/8 067L L3170 TRE80-80L /8 1 3/8 067L L3173 TRE80-80L /8 1 5/8 067L L3174 TRE80-80L /8 1 3/8 067L L3175 TRE80-100L /8 1 5/8 067L L3178 TRE80-100L /8 1 5/8 067L L3179 Pressure equalization = 1/4" ODF 1) The rated capacity is based on ARI Standard ) Number of valves in industrial and multipacks. For connections, refrigerants, capillary tube lengths, etc. outside the standard program, see Valve options. 188
19 TYPE TRE10, TRE20, TRE40, AND TRE80 R407C, R134a STANDARD PROGRAM REFRIGERANT R134a TYPE RATED CAPACITY Q nom 1) TR RATED CAPACITY Q nom 1) TR CONNECTION ODF SOLDER RANGE K 15 /+50 F MOP 60 F 25 /+10 C MOP 15 C Part No. RANGE N 40 /+50 F 40 /+10 C Inlet in. Outlet in. Multipack2) Part No. Multipack2) TRE10-5N 5 5/8 7/8 067L L1103 TRE10-7N 7 5/8 7/8 067L L1106 TRE20-7N 7 5/8 7/8 067L L1141 TRE20-9N 9 5/8 7/8 067L L1145 TRE20-11N 11 7/8 1 1/8 067L L1150 TRE20-14N 14 7/8 1 1/8 067L L1153 TRE20-14N 14 7/8 1 3/8 067L L1154 TRE40-14N 14 7/8 1 1/8 067L L3143 TRE40-14N 14 7/8 1 3/8 067L L3144 TRE40-16N 16 7/8 1 3/ L3147 TRE40-16N /8 1 3/ L3148 TRE40-20N /8 1 3/8 067L L3151 TRE40-25N /8 1 3/8 067L L3154 Pressure equalization = 1/4" ODF 1) According to ARI 750 Rated capacities for Range N are based on: Liquid temperature ahead of expansion valve t1 = 100 F Evaporating temperature te = 40 F Pressure drop across valve p = 60 psi for R134a Pressure drop across valve p = 100 psi for R22, R404A, and R507 Pressure drop across valve p = 160 psi for R410A. 2) Number of valves in industrial and multi-packs. For connections, refrigerants, capillary tube lengths, etc. outside the standard program, see Valve options. 189
20 TYPE TRE10, TRE20, TRE40, AND TRE80 190
Expansion valves - 2 of 2
Expansion valves - 2 of 2 Contents Page Thermostatic expansion valves, type T 2 and TE 2 Introduction... 3 Features... 3 Technical data... 3 Superheat... 3 Ordering: Components with flare flare connection...
More informationStainless steel - the strong solution
MAKING MODERN LIVING POSSIBLE Stainless steel - the strong solution TU and TC thermostatic expansion valves REFRIGERATION & AIR CONDITIONING DIVISION TU / TC: superior by design and function The function
More informationTechnical leaflet Thermostatic expansion valves with fixed orifice
MAKING MODERN LIVING POSSIBLE Technical leaflet Thermostatic expansion valves with fixed orifice Type TDE / TDEB www.danfoss.com Contents Page Introduction........................................................................................3
More informationThermostatic expansion valves Type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic expansion valves Type TGE 10, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants including
More informationThermostatic expansion valves type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves TGE 0, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants.
More informationThermostatic expansion valves type TGE 10, TGE 20 and TGE 40
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves TGE 0, TGE 20 and TGE 40 TGE is a dedicated designed series of thermostatic expansion valves for all standard refrigerants.
More informationThermostatic Expansion
Thermostatic Expansion Valves Thermostatic Expansion Valves TCCE Series Application TCCE thermostatic expansion valve is used to regulate refrigerant flow into the evaporator, especially in applications
More informationThermostatic expansion valves PHT
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves PHT www.danfoss.com Contents Page Introduction........................................................................................
More informationParker TEV Model Visual
PARKER - THERMOSTATIC EXPANSION VALVES TXV MODEL NUMER SELECTION Parker TEV Model Visual N Series TEV C(E) Series TEV SC(E) Series TEV Applications: Applications: Applications: Low Profile Coolers, Rail
More informationThermostatic Expansion Valve
STANDARD Thermostatic Expansion Valve RFKH series thermostatic expansion valves are used to adjust mass flow of refrigerant into the evaporator while controlling the refrigerant s superheat at the outlet
More informationThermostatic and Automatic Expansion Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Thermostatic and Automatic Expansion Valves Catalog E-1, July 2012
More informationInjection valve, type TXI 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Injection valve, type TXI 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Introduction Danfoss has developed a injection valve type TXI 2 for desuperheating in 2-stage refrigeration systems operating
More informationThermostatic Expansion Valve
STANDARD Thermostatic Expansion Valve RFGD series thermostatic expansion valves are used to adjust mass flow of refrigerant into the evaporator while controlling the refrigerant s superheat at the outlet
More informationThermostatic Expansion
Thermostatic Expansion Valves Thermostatic Expansion Valves TC Series Application TC thermostatic expansion valves are used to adjust the supply of refrigerant in evaporator by controlling the superheat.
More informationThermo -Expansion Valves Series TX7
Technical Bulletin TX7 series of Thermo -Expansion Valves are designed predominantly for AC, heat pumps, close control and industrial process cooling applications. The TX7 is ideal for those applications
More informationInjection valve Type TXI 2
Data sheet Injection valve Type TXI 2 The TXI2 is an injection valve for desuperheating in 2-stage refrigeration systems operating on R22/R407C and other similar refrigerants where the hot gas temperature
More informationSolenoid valves Type EVU for fluorinated refrigerants
Data sheet Solenoid valves EVU for fluorinated refrigerants EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied
More informationMAKING MODERN LIVING POSSIBLE. Solenoid valves Type EVU for fluorinated refrigerants REFRIGERATION AND AIR CONDITIONING.
MAKING MODERN LIVING POSSIBLE Solenoid valves EVU for fluorinated refrigerants REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction... 3 Features... 3 Approvals... 3 Technical
More informationParker TEV Model Visual
PARKER - THERMOSTATIC EXPANSION VALVES TXV MODEL NUMBER SELECTION Parker TEV Model Visual N Series TEV C(E) Series TEV SC(E) Series TEV Applications: Applications: Applications: Low Profile Coolers, Rail
More informationTHERMOSTATIC EXPANSION VALVES
PARKER TXV MODEL NUMBER SELECTION S MODEL E EXTERNAL EQUALIZER OPTIONAL 5 V X CHARGE TYPE 00 M.O.P. B BLEED OPTIONAL 0 BLEED S EG (C) C = Internal Check Valve (E) for externally equalized evaporator pressure
More informationCondensed Catalog 410A January 2008
CATALOG Page 1 Condensed Catalog January 2008 This condensed catalog contains product specifically for R- applications. By including a minimum of engineering information we are able to provide a concise
More informationTI Series - Thermo -Expansion Valves
EMERSON TI series of Thermo -Expansion Valves with interchangeable orifices are designed for refrigeration applications such as display cases in supermarkets, walk-in/reach-in coolers, freezers, soft ice
More informationNOTE: If the HF body is stamped HFK, then the cage is replaceable. HF N E S C B 2 H C 5 FT 3/8 x 1/2 ODF S/T. Capacity Nominal Rating in Tons
The HF series is a balanced ported valve designed for refrigeration, air conditioning and heat pump applications. Features Stainless steel replaceable power element eliminates corrosion and prevents valve
More informationAutomatic controls catalogue E.N. 4
TV series Technical parameter Max. body temperature: 80 Max. bulb sensing temperature: 60 About R134a,R22,R407C,R404A/R507 system: Max. working pressure: 3 MPa Max. testing pressure: 3.3 MPa About R410A
More informationCrankcase pressure regulator Type KVL
Data sheet Crankcase KVL KVL crankcase are used to protect the compressor motor against overload experienced during startup after long off periods or just after defrost periods. They are installed in the
More informationHot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory)
MAKING MODERN LIVING POSSIBLE Data sheet Hot gas bypass regulator type CPCE Liquid gas mixer type LG (accessory) A CPCE hot gas bypass regulator is used to adapt compressor capacity to actual evaporator
More informationTHERMOSTATIC EXPANSION VALVE QUICK SELECT
THERMOSTATIC EXPANSION VALVE QUICK SELECT ALCO THERMO EXPANSION VALVE QUICK SELECT GUIDE: APPLICA- TION AIR CONDITIONING AND REFRIGERATION CONSTANT PRESSURE ELECTRICALLY DRIVEN ULTRA-LOW TEMP DE-SUPERHEATING
More informationQUICK SELEC. Economy Performance, Hermetic AA 1/2 thru 5 Economy Performance, Non-Adjustable AN 1/2 thru 5
THERMO EXP XPANSION ALVE QUICK SELEC ELECT GUIDE UIDE: : 1/4 : 1/4 TO 20 T 20 TONS NOMINAL CAPACITY APPLICATION FEATURE MODEL R-22 () PAGE Interchangeable Cages, Flexibility TI 1/3 thru 5 53 SUPERMARKET
More informationCrankcase Pressure Regulating Valves
Crankcase Regulating Valves Crankcase Regulating Valves are designed to prevent overloading of the compressor motor by limiting the crankcase pressure to a predetermined maximum value during and after
More informationElectric expansion valve Type ETS ETS 400
MAKING MODERN LIVING POSSIBLE Data sheet Electric expansion valve Type ETS 12.5 - ETS 400 ETS is a series of electric expansion valves for precise liquid injection in evaporators for air conditioning and
More informationElectric expansion valve Type ETS ETS 400
Data sheet Electric expansion valve Type ETS 12.5 - ETS 400 ETS is a series of electric expansion valves for precise liquid injection in evaporators for air conditioning and refrigeration applications.
More informationGeneral Purpose Catalog Valves, Controls and System Protectors
General Purpose Catalog Valves, Controls and System Protectors January 2016 EmersonClimate.com/flowcontrols Customer Service St. Louis, MO (314) 569-4500 Emerson, Copeland, and Copeland Scroll are trademarks
More informationSolenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and servo operated versions, they can be applied in liquid, suction, and hot
More informationCrankcase pressure regulator Type KVL
MAKING MODERN LIVING POSSIBLE Data sheet Crankcase pressure regulator KVL Crankcase pressure regulator type KVL is fitted in the suction line ahead of the compressor. KVL protects the compressor motor
More informationSolenoid valves Type EVR 2 40 NC/ NO REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves EVR 2 40 NC/ NO REFRIGERATION AND AIR CONDITIONING Technical leaflet 2 DKRCCPDBB0A202-520H275 Danfoss A/S, 0-2006 Contents Page Introduction.......................................................................................
More informationCapacity regulators (hot gas bypass) PMC and CVC
MAKING MODERN LIVING POSSIBLE Technical brochure Capacity regulators (hot gas bypass) PMC and CVC The PMC and CVC is used for capacity regulation in refrigeration, freezing and air conditioning plant for
More informationWholesale Catalog Emerson Valves, Controls and System Protectors. Wholesale Catalog Valves, Controls and System Protectors 2015
Wholesale Catalog Emerson, and Wholesale Catalog, and 2015 Table of Contents Expansion 1-40 41-61 EX & 62-75 EX 76-98 Solenoid & Coils 99-117 Solenoid 118-120 121-136 137-138 139-174 175-181 182-192 Pressure
More informationHFK. Balanced Port Thermo Expansion Valve Kits. Save Inventory $ and Valuable Truck Stock Space
HFK Balanced Port Thermo Expansion Valve Kits Save Inventory $ and Valuable Truck Stock Space Features and Benefits Features of the high performance HF valve now available with interchangeable valve bodies,
More informationElectrically operated expansion valves, type ETS
MAKING MODERN LIVING POSSIBLE Technical brochure Introduction ETS is a series of electrically operated expansion valves for precise liquid injection in evaporators for air conditioning and refrigeration
More informationElectric Expansion Valve Type AKVO 10
Data sheet Electric Expansion Valve Type AKVO 10 AKVO 10 is an electrically operated expansion valve designed for refrigeration plant. AKVO 10 has an internal filter. The AKVO 10 range covers a capacity
More informationMAKING MODERN LIVING POSSIBLE. Eliminator Liquid line filter driers, DCL and DML. Flare connection. Solder connection (copper) Technical brochure
MAKING MODERN LIVING POSSIBLE Eliminator Liquid line filter driers, DCL and DML Flare connection Solder connection (copper) Technical brochure Contents Page Introduction........................................................................................
More informationShut-off valves in stainless steel SVA-S SS
Technical brochure Shut-off valves in stainless steel In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection
More informationquality products for refrigeration and air conditioning products suitable for CFC, HCFC and HFC 2006 release PRODUCT HANDBOOK
quality products for refrigeration and air conditioning products suitable for CFC, HCFC and HFC 2006 release www.castel.it PRODUCT HANDBOOK Pessano - February 2006 17 Thermostatic expansion valves Solenoid
More informationAIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT SANHUA Strive for perfection, Pursuit of excellence Sanhua is a leading HVAC&R manufacturer of controls and components with a global
More informationA full line of field-tested CO 2 controls, stocked for your convenience
A full line of field-tested controls, stocked for your convenience 7000+ systems built with products www.danfoss.us/aftermarket Why choose for? has pioneered technologies for both transcritical and subcritical
More informationElectronic suction modulating valves type KVS
MAKING MODERN LIVING POSSIBLE Technical brochure Electronic suction modulating valves type KVS KVS is a series of electronic suction modulating valves for AC transport and refrigeration applications. Accurate
More informationSolenoid valve for R410A and R744 Types EVR 2 - EVR 6 and EVRH 10 - EVRH 40
Data sheet Solenoid valve for R410A and R744 s EVR 2 - EVR 6 and EVRH 10 - EVRH 40 EVRH high pressure range is a direct or servo operated solenoid valve specially designed to meet the requirements for
More informationPressure and temperature regulators, type PM, and pilot valves
Pressure and temperature regulators, type PM, and pilot valves Introduction Main valves, type PM 1 and PM 3 Pilot valves for mounting directly into main valves, type PM Main valves, type PM 1 and PM 3
More informationCrankcase pressure regulator Type KVL
Data sheet Crankcase pressure regulator KVL Crankcase pressure regulator type KVL is fitted in the suction line ahead of the compressor. KVL protects the compressor motor against overload during start-up
More informationLiquid level control. Thermostatic liquid level regulators, type TEVA. High pressure float valve, type HFI
Liquid level control Contents Page Thermostatic liquid level regulators, type TEVA Introduction... 7 Materials... 7 Technical data... 7 Ordering... 8 Identification... 8 Capacity... 9 Design/Function...
More informationSolenoid valve Types EVR 2 EVR 40 NC/NO
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valve s EVR 2 EVR 40 NC/NO EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with fluorinated refrigerants. EVR valves
More informationt EVAPORATOR PRESSURE REGULATING VALVES
CATALOG 201 Page 63 t EVAPORATOR PRESSURE REGULATING VALVES (S)ORIT-12, -15 and -20 Features n High side pilot for improved temperature control and low P operation n Adjustable n Optional solenoid stop
More informationModulating liquid level regulators, direct-controlled SV 1 and SV 3
MAKING MODERN LIVING POSSIBLE Technical brochure Modulating liquid level regulators, direct-controlled SV 1 and SV 3 The SV 1 and 3 can be used separately as a modulating liquid level regulator in refrigerating,
More informationElectric expansion valve Type AKV 10P, AKV 10PS
Data sheet Electric expansion valve Type AKV 10P, AKV 10PS AKV 10P and AKV10PS are electric operated expansion valves designed for refrigerating plants. The AKV 10P and AKV 10PS valves are normally controlled
More informationElectrically Operated Expansion Valve Types AKV 10, AKV 15 and AKV 20
MAKING MODERN LIVING POSSIBLE Data sheet Electrically Operated Expansion Valve Types AKV 10, AKV 15 and AKV 20 AKV are electrically operated expansion valves designed for refrigerating plants. The AKV
More informationElectrical Control Valves
172 Electrical Control Valves Electrical Control Valves Electrical Control Valve Technology Thermostatic expansion valves and mechanical regulator valves have been used in the refrigeration and air conditioning
More informationELIMINATOR Hermetic filter drier Types DCL and DML
Data sheet ELIMINATOR Hermetic filter drier s DCL and DML All ELIMINATOR driers have a solid core with binding material held to an absolute minimum. There are two types of ELIMINATOR cores. DML driers
More informationSPORLAN - THERMOSTATIC EXPANSION VALVES
SPORLAN - EXPANSION VALVES Selective Thermostat Charges Designed to provide optimum performance for all applications air conditioning heat pump, medium low temperature refrigeration. Thermostatic Element
More informationAlco Controls. Components for the Refrigeration Industry. Product Selection Catalogue
Alco Controls Components for the Refrigeration Industry Product Selection Catalogue Note: The components listed in this catalogue are not released for use with caustic, poisonous or flammable substances.
More informationStrainers in stainless steel Type FIA SS
Data sheet Strainers in stainless steel Type FIA SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for high surface protection
More informationSolenoid valves type EVR 2 40 NC / NO
Solenoid valves type EVR 2 40 NC / NO Introduction EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with fluorinated refrigerants. Features Complete range of solenoid
More informationTechnical brochure Eliminator filter drier DCR - with replaceable solid core
MAKING MODERN LIVING POSSIBLE Technical brochure Eliminator filter drier DCR - with replaceable solid core www.danfoss.com Contents Page Introduction...3 Features...3 Approvals...3 Technical data...4 of
More informationR-22 R-404A/R-502/R-507A R-12/
EMERSON CLIMATE TECHNOLOGIES-System Protectors Recommended System Tonnage Take-Apart Liquid Line Filter Driers in Tons* Description, Low Temp. & Commercial Installations Air Conditioning Field Replacement
More informationSolenoid valves. Solenoid valves, type PKVD Solenoid valves, type EVR NC / NO
Solenoid valves Contents Page Solenoid valves, type PKVD 12-20 Introduction... 5 Features... 5 Technical data... 5 Ordering... 5 Capacity... 6 Sizing... 7 Valve selection... 7 Design/Function... 8 Dimensions
More informationEliminator Liquid line filter driers, type DCL and DML
Eliminator Liquid line filter driers, type DCL and DML Flare connection Solder connection (copper) REFRIGERATION AND AIR CONDITIONING Technical leaflet Eliminator Liquid line filter driers, type DCL and
More informationEX4 / EX5 / EX6 / EX7 / EX8 Electrical Control Valves
ALCO Controls EX4 / EX5 / EX6 / EX7 / EX8 are stepper motor driven valves for precise control of refrigerant mass flow in air conditioning, refrigeration, heat pumps, close control, and industrial process
More informationReliable season change
New perspectives with Danfoss Saginomiya 4 - Way Reversing Valves Reliable season change, VHV 4-way reversing valves Wide application range - complete capacity range - available for all common refrigerants
More informationPilot controlled servo valves Type ICS - Solenoid Valves Pressure Regulating Valves. Technical leaflet MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Pilot controlled servo valves Type ICS - Solenoid Valves Pressure Regulating Valves REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 Features...3
More informationREFRIGERATION STRAINERS
REFRIGERATION STRAINERS AC & R OIL FILTER - POE OIL FILTER-DRIER S-4004 AC&R Components S-4004 Oil Filter removes foreign material from the oil as it passes through the filter. The filter easily captures
More informationPressure operated water valve Type WVFX and WVS
Data sheet Pressure operated water valve WVFX and WVS Pressure operated water valves types WVFX and WVS are used for regulating the flow of water in refrigeration plants with water-cooled condensers. The
More informationThermostatic valve Type AVTA
MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The
More informationShut-off valves in stainless steel Types SVA-S SS and SVA-L SS
Data sheet Shut-off valves in stainless steel s SVA-S SS and SVA-L SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations, there is a need for
More informationTAKE-A-PART SHELLS TOTALINE LIQUID & SUCTION LINE REPLACEABLE SHELLS P505-8 SERIES PART NUMBER SIGNIFICANCE
TOTALINE LIQUID & SUCTION LINE REPLACEABLE SHELLS P505-8 SERIES P PART NUMBER SIGNIFICANCE P360 SIZE (in 1/8 ) 505-8 TOTALINE FILTER DRIER SHELLS APPLICATION Totaline Replaceable Core Shells offer the
More informationELIMINATOR Hermetic bi-flow filter drier Types DMB and DCB
Data sheet ELIMINATOR Hermetic bi-flow filter drier s DMB and DCB Hermetic bi-flow filter driers, types DMB and DCB are for use in liquid lines on heat pumps. Hermetic bi-flow filter driers have built-in
More informationShut-off Check valves and regulating valves for for Industrial Refrigeration
Catalogue Shut-off Check valves and regulating valves for for Industrial Refrigeration Contents Page Check & stop valves, type SCA-X - Check valve, type CHV-X...3 Check & stop valves in stainless steel,
More informationRefrigeration K-211. Replacement Parts. Chillers, Condensers. Compressors, Motors. Electrical. Components. Heating. Indoor Air Quality.
EMERSON CLIMATE TECHNOLOGIES-Oil Controls High Efficiency Centrifugal Oil Separator The High Efficiency Centrifugal Oil Separator is used in ultra-low temperature systems with long refrigerant lines or
More informationELITE SERIES R-410A Ready - Multi-Position
PRODUCT SPECIFICATIONS AIR HANDLERS CBXM ELITE SERIES R-0A Ready - Multi-Position Bulletin No. 0 October 07 Supersedes June 0 Nominal Capacity -. to Tons Optional Electric Heat -. to 0 kw MODEL NUMBER
More informationEX3: stepper motor valve with safety embedded solenoid ON/OFF valve
pag. 1 / 11 EX3: stepper motor valve with safety embedded solenoid ON/OFF valve The EX3 electronic expansion valve provides precise refrigerant flow control and optimizes system superheat. EX3 is the ideal
More informationSolenoid valves type EVRA 3 to 40 and EVRAT 10 to 20
Solenoid valves type EVRA 3 to 40 and EVRAT 10 to 20 Contents Page Approval...569 Technical data...569 Ordering...570 Rated capacity...573 Capacity...573 Design / Function...577 Material specification............................................................................
More informationSporlan Type R Valves Thermostatic Expansion Valves
Sporlan R s Thermostatic Expansion s RACE Catalogue 10-10-8 TEV-2/UK, March 2012 2 RACE Catalogue 10-10-8 TEV-2/UK - 03/2012 TABLE OF CONTENTS Materials and Details of Construction....................................................
More informationPilot operated main valves for regulating pressure and temperature, type PM
MAKING MODERN LIVING POSSIBLE Technical brochure Pilot operated main valves for regulating pressure and temperature, type PM PM valves are pilot operated main valves for regulating pressure and temperature
More informationSolutions for Cooling Professionals. Price Catalogue 2011 Cooling Components.
Solutions for Cooling Professionals Price Catalogue 2011 Cooling Components www.honeywell-cooling.com The direct channel to us: better service, more information Honeywell s professional employees will
More informationPH120. Rooftop Packaged. R410a Refrigerant PERFORMANCE DATA OUTDOOR COIL ENTERING TEMPERATURE 0 C
PH120 R410a Refrigerant Rooftop Packaged INDOOR COIL ENTERING AIR TEMP 0 c DB WB 21 23 25 27 29 31 PERFORMANCE DATA OUTDOOR COIL ENTERING TEMPERATURE 0 C 30 35 40 45 Cap Cap Cap Cap 17 115.3 70.7 11.5
More informationPage Number. Contents: Product Features 2. Physical Data 2. Nomenclature. 3. Blower Performance 3. Electrical Data 4. Warranty.. 6
TC-SGRAH1-1005 October 05 R Series - High Efficiency Multi-position Air Handler Engineering and Specification Guide (Electric and No Heat) With optional field conversion downflow kit Contents: Page Number
More informationS5BP Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS
TECHNICAL SPECIFICATIONS S5BP Series Split System Air Conditioner 71/2 Ton Energy Star rated at 11.7 EER and 11.8 IEER 10 Ton rated at 11.2 EER and 11.5 IEER R-410A Refrigerant The S5BP Series of air conditioners
More informationCCMT - Electrically operated valves for transcritical and subcritical CO2
MAKING MODERN LIVING POSSIBLE Technical brochure - Electrically operated valves for transcritical and subcritical CO2 The is an electrically operated valve designed specifically for operation in CO 2 systems.
More informationElectrical Control Valves Series EX4, EX5, EX6, EX7 & EX8
Electrical Control s Series EX4, EX5, EX6, EX7 & EX8 Features Multifunction as expansion valve, hot gas bypass, suction gas throttling, head pressure, liquid level actuator etc. Fully hermetic design (no
More informationElectric operated valves Type CCM for R744 / CO2
Data sheet Electric operated valves Type CCM for R744 / CO2 The CCM is an electrically operated valve designed specifically for operation in CO 2 systems. The valve is capable of functioning both as an
More informationDanfoss scroll compressors SM SY SZ
Quick reference Danfoss scroll compressors SM SY SZ R407C - R134a - R22-60 z http://danfoss.us.com/ Product range single compressors 0 D Ø D Ø D ØD 2 2 2 2 1 1 1 1 2 1 ØD 200-230V/3~/60z Motor voltage
More informationEMERSON CLIMATE TECHNOLOGIES
STAS STEEL TAKE-APART FILTER DRIER APPLICATION Replaceable core filter-drier for CFC, HCFC and HFC refrigerants for use in large commercial air conditioning and refrigeration systems. FEATURES Unique internal
More informationDanfoss scroll compressors SM SY SZ
Quick reference Danfoss scroll compressors SM SY SZ R407C - R134a - R22-60 z http://cc.danfoss.com Product range single compressors Ø D Ø D ØD 0 D 2 2 2 2 1 1 1 1 D 1 2 S084-090-100 254 508 142 465 S110-120
More informationData sheet. Thermostatically operated cooling water valves Type FJVA. January 2000 DKACV.PD.500.B B0033
Data sheet Thermostatically operated cooling water valves January 2000 DKACV.PD.500.B1.02 520B0033 General data on thermostatically operated cooling water valves Introduction Thermostatically operated
More informationSubcritical CO 2 Innovations
March 2011 / CATALOG 744 Subcritical CO 2 Innovations Energy Conscious Products & Solutions for Supermarkets Subcritical CO 2 Innovations Energy Conscious Products & Solutions for Supermarkets CATALOG
More informationReplaceable solid cores filter driers type CSR
Replaceable solid cores filter driers type CSR N of cores Nominal volume [cm 3 ] (in 3 ) DIMENSIONS AND TECHNICAL CHARACTERISTICS Filtering surface ODS Ø [in.] [mm] ØD1 ØD2 H1 P E H K CSR485 5/8" 16 148
More informationCopeland Scroll TM compressors. for commercial applications
Copeland Scroll TM compressors for commercial applications Contents Page Copeland Scroll TM Story.......................... 2 ZR84K to ZR190K Product Description............................. 5 Features........................................
More informationThermostatic valve Type AVTA
SALES SERVICE +358 (0)17 262 3555 info@econosto.fi MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending
More informationSCROLL - AIR COOLED PACKAGED & SPLIT SYSTEM ICE CHILLERS
SCROLL - AIR COOLED PACKAGED & SPLIT SYSTEM ICE CHILLERS 1 to 40 Nominal Tons Rev-01 TABLE OF CONTENTS Page: Description 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Product Nomenclature Air Cooled Chiller
More informationElectric Expansion Valves
Electric Expansion s Bulletin 100-20-1, January 2011 Page 2 Bulletin 100-20-1UK This supplement to Bulletin 100-20 (September 2008) details the updated Sporlan series of Electric Expansion s. Built on
More informationSPLIT-SYSTEM AIR-COOLED CONDENSING UNITS DESCRIPTION FEATURES H2CA300, 360, 480 & THRU 50 NOMINAL TONS
550.13-TG1Y(98) SPLIT-SYSTEM AIR-COOLED CONDENSING UNITS HCA300, 360, 80 & 600 5 THRU 50 NOMINAL TONS HCA80 DESCRIPTION These units are completely assembled, piped and wired at the factory to provide one-piece
More informationPHconnect. Trade Price Schedule
PHconnect What is PHconnect? PHconnect is Parker s on-line resource for its U.S.A. refrigeration and air conditioning wholesalers. PHconnect enables wholesalers to do the following via the internet: enter
More information