Series: SE (Standard) & 3SE

Size: px
Start display at page:

Download "Series: SE (Standard) & 3SE"

Transcription

1 Series: SE (Standard) & 3SE SE Standard: SE SE51A SE51AU SE SE52A SE52AU SE: 3SE514L SE524L SE594L SE544L SE554L SE724L SE794L SE744L SE754L SE1024L SE1094L SE1044L SE1054L Manual:

2 Series: SE (High Temperature) 0.5HP & 1.0HP, 1750RPM SE51HT SE51HTA SE51HTAU SE52HT SE52HTA SE52HTAU Manual: /09

3 Series: SE (Std & High Temp) & 3SE PARTS KITS SEAL REPAIR KIT:...P/N ( ) 3, 10, 26, 31 OVERHAUL KITS: Single Phase...P/N ( ) 2, 3, 6, 8, 10, 23, 26, 30c, 30d, 31 High Temp...P/N ( ) 2, 3, 6, 8, 10, 23, 26, 30c, 30d, 31 Three Phase...P/N ( ) 2, 3, 6, 8, 10, 23, 26, 30c, 30d, 31, 40, 41 SEAL TOOL KIT...T/L PRESSURE GAUGE KIT..P/N PARTS LIST ITEM QTY. DESCRIPTION 1 1 Seal Plate Retaining Ring Nut 1/2-20 Stainless Motor Housing See Table Bearing Screw #8-32 x 3/8 lg stainless Square Ring Sk Hd Screw 1/4-20 x 1-1/4 lg stainless Gasket Lockwasher 5/16 stainless Cap Screw 5/16-18 x 2 lg stainless Gal. Oil Hex Hd. Plug 2 NPT Eye Bolt w/nut 3/8-16 stainless Pipe Plug 3/8 NPT, Galv Motor See Table Capacitor (single phase) 370V, 20MFD Capacitor Bracket (single phase) Terminal Connector (1 Phase) Terminal Connector (3 Phase) Terminal Connector (3 Phase w/ Temp Sensor) Terminal Connector (SE51HT, HTA & HTAU) Terminal Connector (SE52HT, HTA & HTAU) Volute (Optional) Volute w/discharge Piping 2 Pumps ONLY R 1 (Optional) Volute w/screen, 2 High Temp. ONLY Flange 2 Pumps Flange 3 Pumps Gasket Washer (2 Only) 3/8 stainless Hex Hd. Cap Screw (2 Pumps) 3/8-16 x 1-1/4 lg Hex Hd. Cap Screw (3 Pumps) 5/16-18 x 1-1/4 lg Impeller,Cast Iron 6.00Dia. (STD. for 1.0HP) Dia TA 5.75 Dia TB 5.62 Dia TC 5.50 Dia. (STD. for.75hp) TD 5.38 Dia TE 5.25 Dia. (STD. for.5hp) TF 5.12 Dia TG 5.00 Dia TH 4.88 Dia TJ 4.75 Dia TK 4.62 Dia TL 4.50 Dia TM 7

4 Series: SE (Std & High Temp) & 3SE Dia TN 4.25 Dia TP 4.12 Dia TQ 4.00 Dia TR 30 1 Power Cable Set See Table 3 30a 1 * Cable (Not Sold Separately) 30b 1 * Gland Nut 1-1/8-12 Stainless c 2 * Friction Ring (Single phase) Friction Ring (Three phase & High Temp) d 1 * Grommet (Single phase) Grommet (Three phase & High Temp) Shaft Seal, (Standard) Carbon/Ceramic/Buna-N Tungsten/Tungsten/Buna-N SB Silicon/Silicon/Buna-N SD Carbon/Ceramic/Viton SF Tungsten/Tungsten/Viton SH Silicon/Silicon/Viton SK Silicon/Tungsten/Buna-N SM Carbon/Ni-Resist/Buna-N SN Carbon/Ni-Resist/Neoprene SP Shaft Seal (High Temp) Carbon/Ni-Resist/Viton (Optional) Control Cable Set (Three Phase Only) See Table 3 32a 1 Cable (Not Sold Separately) 32b 1 Gland Nut c 2 Friction Ring d 1 Grommet (Optional) Temperature Sensor (Three Phase Only) Wire Assembly (Standard Models) WE 1 Wire Assembly (High Temp Models) Float Switch w/plug, Mercury (SE51A Only) 15 FT FT XA 25 FT XB 30 FT XC 35 FT XD 40 FT XE 45 FT XF Float Switch, Mechanical (SE51AU Only) Float Switch w/plug, Mechanical (SE52A Only) 15 FT FT XB 30 FT XC 50 FT XF Float Switch, Mechanical (SE52AU, SE51HTAU & SE52HTAU) Float Switch w/plug Mech., High Temp. (SE51HTA Only) 15 FT FT XB 30 FT XC 50 FT XF Float Switch w/plug Mech. High Temp. (SE52HTA) 15 FT FT XB 30 FT XC 50 FT XF (*) Included with Item #30. ( ) Included with Item #32 8

5 Series: SE (Std & High Temp) & 3SE 40 3 Connector,Terminal ( Three Phase) Wire Nut (Three Phase-230V) Wire Nut (Three Phase-460V& 575V) ITEMS 39a, 39b, 39c, 39d, 42,43,44 ARE FOR AU FLOATS 39-2 & a 2 Friction Ring Stainless b 1 Grommet c 1 Gland Nut 1-16 Stainless d 3 Terminal Connector Lockwasher #10 Stainless Cord Clip Rd Hd Screw x 3/8 Lg St ITEMS 45, 46, 47 & 48 ARE FOR HIGH TEMPERATURE S ONLY Inlet Strainer (Optional- Stainless, used on Assembly) Hex Hd Screw (Optional-, 3/8-16 x.875 Lg. Stainless.) Pressure Relief Valve (3/4 NPT, Stainless) Pipe Closure (Red, Plastic) PUMP TABLE 2 - MOTOR AND HOUSING MOTOR HOUSING (Item #5)Standard MOTOR HOUSING (Item #5)w/Temp. MOTOR (Item #20) SE N/A MA SE51A N/A MA SE51AU HA N/A MA SE N/A MB SE52A N/A MB SE52AU HA N/A MB SE51HT HB N/A SE51HTA HB N/A SE51HTAU N/A SE52HT HB N/A SE52HTA HB N/A SE52HTAU N/A SE514L N/A MA 3SE524L N/A MB 3SE594L HA MB 3SE544L HA MB 3SE554L HA SE724L N/A MB 3SE794L HA MB 3SE744L HA MB 3SE754L HA SE1024L N/A MB 3SE1094L HA MB 3SE1044L HA MB 3SE1054L HA

6 Series: SE (Std & High Temp) & 3SE S/ LENGTH SE51, SE51A, SE51AU, 3SE514L, SE51HT, SE51HTA, SE51HTAU TABLE 3 - POWER & SENSOR CABLE SETS SE52, SE52A, SE52AU 3SE524L, 3SE724L, 3SE1024L SE52HT, SE52HTA, SE52HTAU 3SE 3 PHASE Non CSA Units (OPTIONAL) 3SE 3 PHASE CSA Units ITEM # 32 (OPTIONAL) TEMP. SENSOR CABLE for 3 Phase Units 15 FT (Std) FT XB XB XB XB XB XB XB 30 FT XC XC XC XC XC XC XC 40 FT XE XE XE XE XE XE XE 50 FT XF XF XF XF XF XF XF 75 FT XJ XJ XJ XJ XJ XJ XJ 100 FT XL XL XL XL XL XL XL 125 FT XP XP XP XP XP XP XP 150 FT XS XS XS XS XS XS XS 175 FT XV XV XV XV XV XV XV 200 FT XY XY XY XY XY XY XY End 10

Series: SE (Standard) & 3SE-L

Series: SE (Standard) & 3SE-L www.cranepumps.com Series: SE (Standard) & 3SE-L SE: SE51 104871 SE51A 104872 SE51AU 104873 SE52 104874 SE52AU 104875 SE594L 104881 SE544L 104882 SE554L 104883 SE774L 104884 SE794L 104885 SE744L 104886

More information

Series 2SEV-L & 3SEV-L 2" & 3" NPT Discharge - Submersible Sewage Ejectors.5,.75 & 1.0HP, 1750 & 3450RPM

Series 2SEV-L & 3SEV-L 2 & 3 NPT Discharge - Submersible Sewage Ejectors.5,.75 & 1.0HP, 1750 & 3450RPM 2SEV-L, 1750RPM 2SEV514L 104918 2SEV524L 104919 2SEV594L 104920 2SEV544L 104921 2SEV554L 104922 2SEV724L 104928 2SEV794L 104929 2SEV744L 104930 2SEV754L 104931 2SEV1024L 104936 2SEV1094L 104937 2SEV1044L

More information

Series 8SH 8SH Standard 21 Frame HP, 1750RPM

Series 8SH 8SH Standard 21 Frame HP, 1750RPM www.cranepumps.com 25-30 HP, 1750RPM MODEL PART NO. 8SHDU25044 139471 8SHDU25054 139472 8SHDU30044 139559 8SHDU30054 139560 Manual: 125508 1 7.5-20 HP, 1150RPM www.cranepumps.com MODEL PART NO. 8SHDU75N6

More information

Series 4SH 4SH Standard 18 Frame HP, 3450RPM

Series 4SH 4SH Standard 18 Frame HP, 3450RPM 7.5-10 HP, 3450RPM MODEL PART NO. 4SHVA75N2 133650 4SHVA7552 133651 4SHVA100N2 133652 4SHVA10052 133653 Manual: 133030 4SHVB75N2 133655 4SHVB7552 133656 4SHVB100N2 133657 4SHVB10052 133658 1 2-10 HP, 1750RPM

More information

P1X Series. Compact Rodless Air Cylinders Contents

P1X Series. Compact Rodless Air Cylinders Contents Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...

More information

BARNES. INSTALLATION MANUAL Submersible Effluent, Sump & Sewage Ejectors

BARNES. INSTALLATION MANUAL Submersible Effluent, Sump & Sewage Ejectors BARNES INSTALLATION MANUAL Submersible Effluent, Sump & Sewage Ejectors Series: *BP314 & BP324,.3Hp *SE411 & SE421,.4Hp SE511 & SE521,.5Hp SEV511 & SEV521,.5Hp 1750 RPM, 60 Hz. *(Standard & High Temperature)

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

BARNES. INSTALLATION and OPERATION MANUAL Submersible Sewage Non-Clog Pumps

BARNES. INSTALLATION and OPERATION MANUAL Submersible Sewage Non-Clog Pumps BARNES INSTALLATION and OPERATION MANUAL Submersible Sewage Non-Clog Pumps Series: Series: Series: 4SE-L, 1.9 & 2.8HP 1150RPM, 60Hz 4SE-L, 2.8, 3.7 & 5HP 1750RPM, 60Hz 4SE-L, 5HP 3450RPM, 60Hz Series:

More information

FULL COLOR TAB #1 TA 7

FULL COLOR TAB #1 TA 7 FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder

More information

HYDRAULIC HEAVY DUTY

HYDRAULIC HEAVY DUTY Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,

More information

M/1000, Heavy Duty Cylinders Double Acting

M/1000, Heavy Duty Cylinders Double Acting > > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.

More information

LANDING GEAR WARNING AND INDICATING SYSTEM FIG 0001 PAGE 0 JUL 01/12

LANDING GEAR WARNING AND INDICATING SYSTEM FIG 0001 PAGE 0 JUL 01/12 LANDING GEAR POSITION AND WARNING LANDING GEAR WARNING AND INDICATING SYSTEM LANDING GEAR WARNING AND INDICATING SYSTEM 32-60 PAGE 0 -001 WARNING AND INDICATING SYSTEM - LANDING GEAR (SD3 06 6040XM) 010

More information

HEAVY DUTY PNEUMATIC CYLINDERS

HEAVY DUTY PNEUMATIC CYLINDERS HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless

More information

MODEL NUMBER DESIGNATION 9-0 XX X X

MODEL NUMBER DESIGNATION 9-0 XX X X SECTION: G REPLACEMENT PARTS G-1 ORDERING REPLACEMENT PARTS: Your local Prosser distributor can supply parts and repair service. When ordering parts, ALWAYS furnish the following information: Specify pump

More information

SERIES TA (NFPA) CYLINDER

SERIES TA (NFPA) CYLINDER Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00, improving bearing surface alignment. SERIES (NFPA) CYLINDER Reduces cylinder drag and erractic operation Reduces cylinder

More information

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the

More information

INSTALLATION and OPERATION MANUAL. Submersible Sewage Ejector

INSTALLATION and OPERATION MANUAL. Submersible Sewage Ejector INSTALLATION and OPERATION MANUAL Submersible Sewage Ejector SERIES: WE,.4 HP 1750 RPM IMPORTANT: Read all instructions in this manual before operating pump. As a result of Crane Pumps & Systems constant

More information

CONSTANT EFFORT SUPPORTS

CONSTANT EFFORT SUPPORTS CONSTANT EFFORT SUPPORTS Our current range of Constant Effort Supports is the latest step in a continuous development prograe which began in 1950 with the Con-Ten support. The range has been designed taking

More information

500 Series Hydraulic Power Units Pressures to 3000 psi Flows to 3 gpm

500 Series Hydraulic Power Units Pressures to 3000 psi Flows to 3 gpm Pressures to 3000 psi Flows to 3 gpm Catalog B500/USA November 2000 11 Power Unit Features The hydraulic power units offer you the durability of top quality industrial power units in an economical package.

More information

AIR CYLINDER Series A75, A76

AIR CYLINDER Series A75, A76 A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both

More information

CYLINDERS OPTIONS ACCESSORIES

CYLINDERS OPTIONS ACCESSORIES CYLINDERS NFPA Interchangeable 1.50 thru 1 Bores 50 PSI Pneumatic Strokes to 10 Inches Permanent Lubrication Temperatures: 00 F Standard Double Acting Multi-Stage Multi-Position Triple Rod Flush Mount

More information

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6 AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure

More information

B/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B

B/M No. B H00925 M /8-10T 3 B H00920 M /8-10T 2-1/2 Part Number. Item. No. 800B Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for

More information

AIR CYLINDER Series A25, A26

AIR CYLINDER Series A25, A26 A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.

More information

Tie rods cylinders to ISO standard

Tie rods cylinders to ISO standard Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643

More information

250 psi rating. series. pneumatic cylinders. bulletin 0606ST.

250 psi rating. series. pneumatic cylinders. bulletin 0606ST. 20 psi rating series ST pneumatic cylinders bulletin 0606ST www.royalcylinders.com i Contents Page Description 1 Mounting Styles 2 Features Description Mounting dimensions 3 STNM No Mount (MX0) 3 STME

More information

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder

More information

Over 25 years of serving Power generation, Petroleum, Nuclear, Process, Oil & gas, Offshore, Water & HVAC industries worldwide.

Over 25 years of serving Power generation, Petroleum, Nuclear, Process, Oil & gas, Offshore, Water & HVAC industries worldwide. Over 25 years of serving Power generation, Petroleum, Nuclear, Process, Oil & gas, Offshore, Water & HVA industries worldwide. History Present We were Incorporated in the year 1984 under the name and style

More information

ws = white sw = black ro = red br = brown bl = blue gr = grey 267 li = lilac ge = yellow or = orange B110 rs = pink R51

ws = white sw = black ro = red br = brown bl = blue gr = grey 267 li = lilac ge = yellow or = orange B110 rs = pink R51 New Beetle Wiring Diagram No. 20 / 2 Door control module (driver side), left front window switch, switch for window regulator front right (driver), switch for interior lock (driver side) E40 - Left Front

More information

The Price Alternative Pneumatic Cylinders and Slides

The Price Alternative Pneumatic Cylinders and Slides The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES

More information

550 Series Hydraulic Power Units. Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm)

550 Series Hydraulic Power Units. Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm) Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm) 19 Power Unit Features We are pleased to introduce our new C hydraulic power units. The combines the features and benefits our customers and markets

More information

Series 8SHDU. Specifications: Series: 8SHDU 25-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3.50" Spherical Solids Handling

Series 8SHDU. Specifications: Series: 8SHDU 25-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3.50 Spherical Solids Handling www.cranepumps.com Series 8SHDU 21 Frame Driver Specifications: DISCHARGE... 8", 125 lb. Horizontal Flange Slotted to accommodate 200mm ISO Flanges LIQUID TEMPERATURE... 4 F (40 C) Continuous VOLUTE...

More information

Tie rods cylinders to ISO standard Ø

Tie rods cylinders to ISO standard Ø Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562

More information

Series 4XSHD. Specifications: Series: 4XSHD 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling

Series 4XSHD. Specifications: Series: 4XSHD 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3 Spherical Solids Handling www.cranepumps.com Series 4XSHD 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...

More information

Appendix E Part Details for the PZ7 with Standard Bypass Valve

Appendix E Part Details for the PZ7 with Standard Bypass Valve Appendix E Part Details for the PZ7 with Standard Bypass Valve No. Part No. Description Qty. 568 Pump case 66-X6R Rotor-shaft assembly 57 Vane 6 4 46-X Vane driver 5 9 Sideplate 44-XA Seal assbly. (Buna-N

More information

CXV Series Pump Body Service Parts List

CXV Series Pump Body Service Parts List Document Number Issue Date 09/29/78 Rev. Date 1/16/18 CXV Series Pump Body Service Parts List C10 Series CXVC10C CXVC10D CXVC10E CXVC10F C20 Series CXVC20B CXVC20C CXVC20D CXVC20E CXVC20F D Series Pump

More information

B43 TBC 230/S/D/DS. A partir du numéro de série : 01 mars 2005 # (STD )

B43 TBC 230/S/D/DS. A partir du numéro de série : 01 mars 2005 # (STD ) TBC 230/S/D/DS A partir du numéro de série : B043960 01 mars 2005 #978-48301-100 (STD 48301-48302) TBC-230,S,D CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 001 157-01570-90 SPARK PLUG

More information

SERIES MH (NFPA) CYLINDER

SERIES MH (NFPA) CYLINDER MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation

More information

FloorCrafter Belt Sander

FloorCrafter Belt Sander FloorCrafter Belt Sander Section II Parts and Service Manual (0255B-DE) U.S. Patent No. 5,55,0 and No. 6,58,858 Clarke American Sanders FloorCrafter Bedienungshandbuch Page 2 FloorCrafter Main Assembly

More information

ISO 6020/2 industricylindre Industrial cylinders

ISO 6020/2 industricylindre Industrial cylinders According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,

More information

Double acting, cushioned, magnetic Ø mm

Double acting, cushioned, magnetic Ø mm CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562

More information

BARNES. INSTALLATION and OPERATION MANUAL Submersible Non-Clog Pumps

BARNES. INSTALLATION and OPERATION MANUAL Submersible Non-Clog Pumps BARNES INSTALLATION and OPERATION MANUAL Submersible Non-Clog Pumps Series: 4SE-L & DS.9, 1.4 & 1.9 HP, 1750RPM, 60 Hz. Single and Double Seal IMPORTANT! Read all instructions in this manual before operating

More information

REPAIR PARTS ROBJETSU. Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT

REPAIR PARTS ROBJETSU. Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT REPAIR PARTS ROBJETSU Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT Index JETS J03, J05, J03N, J05N...3 JS...4 JL07N, JL0N...5 GH...6 Primeflow...7 XSH...8 VA...9 SUBMERSIBLES E... 0 4" High

More information

PARTS BOOK TRIPLEX MUD PUMP WS-1300T

PARTS BOOK TRIPLEX MUD PUMP WS-1300T PARTS BOOK TRIPLEX MUD PUMP WS-1300T White Star Pump Co. 22718 Commercial Lane, Tomball, Texas 77375 2010 For parts and service contact White Star sales office 22718 Commercial Lane, Tomball, Texas 77375

More information

Aqueducts Irrigation Water distribution Industrial applications APPLICATION DATA

Aqueducts Irrigation Water distribution Industrial applications APPLICATION DATA NOCCHI NRB STANDARDIZED CLOSE COUPLED CENTRIFUGAL PUMPS (2-4 POLE) RUGGED AND RESISTANT, WIDE RANGE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 The electric pumps

More information

FLIGHT COMPARTMENT 0001 LIGHTING INSTALLATION - FLIGHT COMPARTMENT LIGHTING INSTALLATION - FLIGHT COMPARTMENT FIG 0001 PAGE 0

FLIGHT COMPARTMENT 0001 LIGHTING INSTALLATION - FLIGHT COMPARTMENT LIGHTING INSTALLATION - FLIGHT COMPARTMENT FIG 0001 PAGE 0 FLIGHT COMPARTMENT 0001 LIGHTING INSTALLATION - FLIGHT COMPARTMENT LIGHTING INSTALLATION - FLIGHT COMPARTMENT 33-10 FIG 0001 PAGE 0 0001-001 LIGHTS INST FLIGHT COMPARTMENT - -010 -ROOF PANEL AND STANDBY

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

Parts Catalog. Mixer SP30. Model:

Parts Catalog. Mixer SP30. Model: , 0 99 ECN Parts Catalog Mixer SP0 Model: SP0 0/9/0 Rev. - IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE FOOD EQUIPMENT COMPANY East

More information

Hydraulic Cylinder NFPA Industrial Type

Hydraulic Cylinder NFPA Industrial Type Hydraulic Cylinder NFPA Industrial Type RA 7038/08.3 Replaces: 0.3 /44 Model CDT/CGT Series X Nominal pressure: Up to,500 psi maximum Table of contents Features Contents Page Duty, up to,500 psi (see chart

More information

Product Information Packet IDM2334T 20HP,1770RPM,3PH,60HZ,256TC,0960M,TEBC,F

Product Information Packet IDM2334T 20HP,1770RPM,3PH,60HZ,256TC,0960M,TEBC,F Product Information Packet IDM2334T 20HP,1770RPM,3PH,60HZ,256TC,0960M,TEBC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless

More information

CERTAIN F-150 AND MARK LT VEHICLES EQUIPPED WITH 5.4L 3-VALVE ENGINES BRAKE BOOSTER VACUUM HOSE REPLACEMENT

CERTAIN F-150 AND MARK LT VEHICLES EQUIPPED WITH 5.4L 3-VALVE ENGINES BRAKE BOOSTER VACUUM HOSE REPLACEMENT PAGE 1 OF 6 CERTAIN 2005-2006 F-150 AND MARK LT VEHICLES EQUIPPED WITH 5.4L 3-VALVE ENGINES REPLACEMENT OVERVIEW This program involves replacing the brake booster vacuum hose at the rear of the engine

More information

Series 4XSHV. Specifications: Series: 4XSHV , 3450RPM, 60Hz 2-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling

Series 4XSHV. Specifications: Series: 4XSHV , 3450RPM, 60Hz 2-10HP, 1750RPM, 60Hz. 18 Frame Driver 3 Spherical Solids Handling Series 4XSHV 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,

More information

Product Information Packet L1177T 15HP,1760RPM,1PH,60HZ,254T,0956LC,TEFC

Product Information Packet L1177T 15HP,1760RPM,1PH,60HZ,254T,0956LC,TEFC Product Information Packet L1177T 15HP,1760RPM,1PH,60HZ,254T,0956LC,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless

More information

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

BARNES. INSTALLATION and OPERATION MANUAL Submersible Sewage Ejector

BARNES. INSTALLATION and OPERATION MANUAL Submersible Sewage Ejector BARNES INSTALLATION and OPERATION MANUAL Submersible Sewage Ejector Series: *SE & 3SE-L & DS.5,.75 & 1 HP, 1750RPM, 60 Hz. Single and Double Seal *(Standard and High Temperature) IMPORTANT! Read all instructions

More information

BOSS Series D Control Valve

BOSS Series D Control Valve Applications Process control systems for food, pulp and paper, chemical, petrochemical & other industries HVAC systems Feed water and fuel system controls in boiler rooms Packaged systems (OEM) such as

More information

kysimply Unique Unique 7000 Series Y-Body

kysimply Unique Unique 7000 Series Y-Body . kysimply Unique ky Unique 7000 Series Y-body General Information The Unique 7000 Series is an innovative new generation of Tri-Clover single seat valves that are designed to meet the highest process

More information

DrizAir LGR 2000 Dehumidifier (Models: F232,F V,F VUK,F232-GRN,F232-SM,F232-SP,F232-HE,F232-BE) Symbol Definition

DrizAir LGR 2000 Dehumidifier (Models: F232,F V,F VUK,F232-GRN,F232-SM,F232-SP,F232-HE,F232-BE) Symbol Definition DrizAir LGR 2000 Dehumidifier (Models: F232,F232-230V,F232-230VUK,F232-GRN,F232-SM,F232-SP,F232-HE,F232-BE) Symbol Definition * + - multiple components to choose from for different models: voltage, size,

More information

P05 PM 45 (TBC 4500) 10 juillet 2002 WW048956

P05 PM 45 (TBC 4500) 10 juillet 2002 WW048956 PM 45 (TBC 4500) 10 juillet 2002 WW048956 PM-45 CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 006 157-11666-90 SPARK PLUG CAP ASS'Y 1 007 255-04200-20 SPARK PLUG RUBBER COVER 1 008 018-01805-20

More information

Muncie Power Products, Inc.

Muncie Power Products, Inc. EX DRIVE SHAFT EXTENSION PARTS LIST AND SERVICE MANUAL Muncie Power Products, Inc. XD10 A0XX X C C R X XD10 - For CD10 XS10 - For CS10 XS2 - For CS2 XS1 - For CS1 A0XX - Allison 000 Series A0XX - Allison

More information

Series 6SHV. Specifications: Series: 6SHV 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

Series 6SHV. Specifications: Series: 6SHV 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3 Spherical Solids Handling Series 6SHV 21 Frame Driver Specifications: DISCHARGE... 6", 1 lb. Horizontal Flange Slotted to accommodate 1mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,

More information

Cylinders Small Bore Tie Rod

Cylinders Small Bore Tie Rod Cylinders Small Bore Tie Rod Reference Control Valves Cylinders Specialty Valves Production Devices Index Cylinder Materials Heads: Tubes: Piston: Rod: Bearing: Piston and Rod Seals: Rod Wiper: Tie Rods:

More information

Series 6XSHD. Specifications: Series: 6XSHD 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

Series 6XSHD. Specifications: Series: 6XSHD 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3 Spherical Solids Handling www.cranepumps.com Series 6XSHD 21 Frame Driver Specifications: DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...

More information

DI PUMP PARTS PRICE LIST

DI PUMP PARTS PRICE LIST ITEM 1 2 2A PUMP 5040 Pump Body, 1-1/2" NPT Mech. Seal 1 40058 1 5040 Pump Body, 1-1/2" NPT, Packing 1 40057 1 5040 Pump Body, 1-1/2" 150# Flg., Mech. Seal 1 40787 1 5040 Pump Body, 1-1/2" 150# Flg., Packing

More information

Series OCG Pneumatic Cylinders

Series OCG Pneumatic Cylinders New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING

More information

* * 5000 SERIES * * * * ENGINEERING CODEBOOK * *

* * 5000 SERIES * * * * ENGINEERING CODEBOOK * * * * 5000 SERIES * * * * ENGINEERING CODEBOOK * * THROUGH THE USE OF THIS CATALOG ALL THE COMPONENT PARTS OF ANY PERMCO PUMP OR MOTOR CAN BE DETERMINED EXCLUDING FASTENERS. THIS IS A CODE BOOK FOR THE 5000

More information

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed

More information

B42 TBC 230/B/BS. A partir du numéro de série : 01 mars 2005 # (STD )

B42 TBC 230/B/BS. A partir du numéro de série : 01 mars 2005 # (STD ) TBC 230/B/BS A partir du numéro de série : B038700 01 mars 2005 #978-48301-100 (STD 48301-48302) TBC-230B,BS CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty Serial No. 001 157-01570-90 SPARK

More information

Cylinders HD1 Cylinders

Cylinders HD1 Cylinders Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and

More information

Series 6SHM. Specifications: Series: 6SHM 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

Series 6SHM. Specifications: Series: 6SHM 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3 Spherical Solids Handling www.cranepumps.com Series 6SHM 21 Frame Driver Specifications: DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...

More information

Berkeley Cast Iron Impeller B1-1/2ZPH ELECTRIC MOTOR DRIVE. Threaded Case (NPT), Packing Construction. Table I. Table II

Berkeley Cast Iron Impeller B1-1/2ZPH ELECTRIC MOTOR DRIVE. Threaded Case (NPT), Packing Construction. Table I. Table II Cast Iron Impeller B-/ZPH Threaded Case (NPT), Packing Construction Page 50. Date March 4, 03 Supersedes 07/0/ 3 B/M HP PH RPM "U" Dim. Imp. Dia. Imp. B53759 5 3 3600 -/4" 7.94" M07666 B596 0 3 3600 -/4"

More information

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting

More information

LANDING GEAR & ACCESSORIES

LANDING GEAR & ACCESSORIES GD60 FAST GEAR LANDING GEAR GD60 FAST GEAR COMPONENTS (AFTER JUNE 2000) 1 BINXB-BRG-013-77 THRUST BEARING 2 BINXB-PW-016-62 WASHER 2 X 1.192 3 BINXA-CRP-V-06635 GROOVED PIN.38 X 2 4 BINLG0570-01 BEVEL

More information

B06 TBC 300/SDH (TBC 4500) 28 septembre 2002 V099900

B06 TBC 300/SDH (TBC 4500) 28 septembre 2002 V099900 TBC 300/SDH (TBC 4500) 28 septembre 2002 V099900 TBC-300,SDH CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty Serial No. 001 157-0097A-90 SPARK PLUG CAP ASS'Y 1 002 018-01700-21 SPARK PLUG

More information

C19 TPS mars 2003 Z063800

C19 TPS mars 2003 Z063800 TPS 2501 29 mars 2003 Z063800 TPS-2501 CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 001 157-01570-90 SPARK PLUG CAP ASS'Y 1 002 018-00546-21 SPARK PLUG BMR6A 1 006 001-07060-90 CYLINDER

More information

CONTINENTAL TOWN CAR MARK VIII NAVIGATOR

CONTINENTAL TOWN CAR MARK VIII NAVIGATOR FUEL SYSTEM FUEL PUMP Article No. WHINING / BUZZING NOISE COMES THROUGH 01-7-3 ENTERTAINMENT OR TWO-WAY RADIO SPEAKER RADIO ENTERTAINMENT OR TWO-WAY COMMUNICATION WHINING / BUZZING NOISE IN SPEAKERS CAUSED

More information

Aluminium profile. Double-acting, cushioned, magnetic ø mm

Aluminium profile. Double-acting, cushioned, magnetic ø mm > Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic

More information

Custom stroke length (per mm) Axial foot type both sides. Max. stroke length (mm) Min. stroke length (mm) Axial foot type single.

Custom stroke length (per mm) Axial foot type both sides. Max. stroke length (mm) Min. stroke length (mm) Axial foot type single. U SM Series variation Variation Double acting Single acting extend type Single acting retract type Double acting stroke adjustable type (extended) Double acting stroke adjustable type (retracted) Double

More information

King Of Valve Co.,Ltd.

King Of Valve Co.,Ltd. U SM Series variation Variation Double acting Single acting extend type Single acting retract type Double acting stroke adjustable type (extended) Double acting stroke adjustable type (retracted) Double

More information

L INEAR ACTUATORS: AIR CYLINDERS SERIES C Bar. Carbon steel Hard chrome finish Ø20, Ø25 bores only ORDER LINES

L INEAR ACTUATORS: AIR CYLINDERS SERIES C Bar. Carbon steel Hard chrome finish Ø20, Ø25 bores only ORDER LINES 1-45 A IR CYLINDER BORE SIZES: Ø8, 10, 12, 16, 20, 25 Conforms to CETOP RP52P and ISO 6432 standards Double or single acting models High speed actuation Auto switch sensing optional Special shaped rod

More information

BARNES. INSTALLATION and OPERATION MANUAL Submersible Fountain Pumps

BARNES. INSTALLATION and OPERATION MANUAL Submersible Fountain Pumps BARNES INSTALLATION and OPERATION MANUAL Submersible Fountain Pumps Series: SF & 3SF-L.5 & 1.0 HP, 1750 RPM, 60 Hz. IMPORTANT! Read all instructions in this manual before operating pump. As a result of

More information

BARNES. INSTALLATION and OPERATION MANUAL Submersible Sewage Ejector

BARNES. INSTALLATION and OPERATION MANUAL Submersible Sewage Ejector BARNES INSTALLATION and OPERATION MANUAL Submersible Sewage Ejector Series: 2SEV & 3SEV, L & DS 1.5 & 2 HP, 3450 RPM, 60 Hz. Single and Double Seal IMPORTANT! Read all instructions in this manual before

More information

TPS-2501,S CYLINDER/PISTON/CRANK SHAFT

TPS-2501,S CYLINDER/PISTON/CRANK SHAFT TPS-2501,S CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 001 157-01570-90 SPARK PLUG CAP ASS'Y 1 002 018-00546-21 SPARK PLUG BMR6A 1 006 001-07060-90 CYLINDER SET 1 007 994-64050-204 SCREW

More information

ADAPTER GEAR ASSEMBLIES

ADAPTER GEAR ASSEMBLIES ADAPTER GEAR ASSEMBLIES PARTS LIST AND SERVICE MANUAL Adapter Gear Assemblies are normally used to reverse rotation of the PTO output shaft and to clear mounting obstructions. Standard adapters will move

More information

Honda A A175047C A A B16782 B16775 B17057 B17058 B quantity in package. fastener corresponding. catalogue.

Honda A A175047C A A B16782 B16775 B17057 B17058 B quantity in package. fastener corresponding. catalogue. 60002 60003 71176 71177 A175047 A175047C A175048 A175049 B14268 B14274 B14313 B14695 B14697 B14698 B15998 B16775 B16782 B17057 B17058 B17143 OEM 60002 10 Accord 93 98, 02 07, 08, Civic 06 11, CR-V 97 01,

More information

Product Information Packet IDM4115T 50HP,1775RPM,3PH,60HZ,326T,1272M,TEBC,F1

Product Information Packet IDM4115T 50HP,1775RPM,3PH,60HZ,326T,1272M,TEBC,F1 Product Information Packet IDM4115T 50HP,1775RPM,3PH,60HZ,326T,1272M,TEBC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless

More information

Parker Series 2A Air Cylinder

Parker Series 2A Air Cylinder Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.

More information

Submersible Pumps Models: ST-2037 ST-2047 ST-2047B ST-2038P ST-2040T

Submersible Pumps Models: ST-2037 ST-2047 ST-2047B ST-2038P ST-2040T OPERATION AND PARTS MANUAL Submersible Pumps Models: ST-2037 ST-2047 ST-2047B ST-2038P ST-2040T Revision # 1 (11/07/05) THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES. ST-2037, 47, 47B, 38P, 40T

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

Optimized for OEM requirements at a lower price.

Optimized for OEM requirements at a lower price. The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO

More information

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI

HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI HEAVY DUTY HYDRAULIC CYLINDERS NFPA STYLE 1 1/2 TO 8 BORE HYDRAULIC 3000 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to + 220F, large cross section lip type wiper designed to protect the bearing

More information

B10 SUM 400/N (TBC 4500) 13 mai 2002 W107150

B10 SUM 400/N (TBC 4500) 13 mai 2002 W107150 SUM 400/N (TBC 4500) 13 mai 2002 W107150 SUM-400,N CYLINDER/PISTON/CRANK SHAFT 01 Ref. Part No. Description Q'ty 001 157-0097A-90 SPARK PLUG CAP ASS'Y 1 002 018-01700-21 SPARK PLUG BMR7A 1 004 001-0135U-90

More information

COMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit

COMPRESSORS 09/97 CB-5C-050. Suggested Spare Parts for LB601 and LB601A Compressors: Qty./ Unit 09/97 CB-5C-050 Suggested Spare Parts for LB601 and LB601A Compressors: Part # Description Qty./ Unit Comm. Qty. 794099 Gasket Set - Buna-N, Aluminum T 1 1 1 794259 Suction Valve Sub-Assembly T 2 2 794279

More information

Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End

Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design

More information

L1177T 15HP,1760RPM,1PH,60HZ,254T,0956LC,TEFC

L1177T 15HP,1760RPM,1PH,60HZ,254T,0956LC,TEFC Product Information Packet L1177T 15HP,1760RPM,1PH,60HZ,254T,0956LC,TEFC Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise

More information

YFZ450RSF (1TDG) U.S.A. 1P1TD-110EA

YFZ450RSF (1TDG) U.S.A. 1P1TD-110EA YFZ450RSF (1TDG) U.S.A. 1P1TD-110EA ( ) YFZ450RSF PARTS CATALOGUE 2014 by Yamaha Motor Co., Ltd. 1st edition, October 2014 All rights reserved. Any reprinting or unauthorized use without the written permission

More information

Series 4SHM. Specifications: Series: 4SHM 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling. Solids Handling Submersible Pumps

Series 4SHM. Specifications: Series: 4SHM 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3 Spherical Solids Handling. Solids Handling Submersible Pumps www.cranepumps.com Series 4SHM 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC

More information

Section 200 Page 1 Effective: January 15, 2013 Supersedes: June 1, 2012

Section 200 Page 1 Effective: January 15, 2013 Supersedes: June 1, 2012 Section 200 Page 1 HPG200 - Submersible Grinder Pump Model Volt/Ph Imp Dia-in. Cord Wt. (lbs.) Part Number List Price HPG200M2-2 230/1 5.5 20' 82 526031007 $2,549 HPG200M3-2 230/3 5.5 20' 82 526031017

More information