Series 6SHV. Specifications: Series: 6SHV 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling
|
|
- Russell Richardson
- 5 years ago
- Views:
Transcription
1 Series 6SHV 21 Frame Driver Specifications: DISCHARGE... 6", 1 lb. Horizontal Flange Slotted to accommodate 1mm ISO Flanges LIQUID TEMPERATURE F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Cast Iron ASTM A-48, Class 30 IMPELLER: Design... Vortex, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-6, SHAFT Stainless Steel O RINGS... Buna-N HARDWARE Series Stainless Steel LIFTING BAIL Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware Series Stainless CORD ENTRY... Custom Molded, Quick Connected for Sealing and Strain Relief POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED or 11RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... White Iron Impeller, Seal Material, Impeller Trims, Cord Length MARKINGS... CSA, CE WEIGHT lbs (267 Kg) NOISE EMISSION MAX... In-Air 64 db-a SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel Leg Kit C US LR16567 Series: 6SHV 15-30HP, 17RPM, 60Hz HP, 11RPM, 60Hz Sample Specifi cations: Section Page F. This product may be covered by one or more of the following patents and other patent(s) pending: US Patent 7,931,473 & 8,128,360 DESCRIPTION: SUBMERSIBLE NON-CLOG PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. WARNING: CANCER AND REPRODUCTIVE HARM /18
2 Series 6SHV 28 Frame Driver Series: 6SHV 20-60HP, 17RPM, 60Hz 20-40HP, 11RPM, 60Hz 20-30HP, 870RPM, 60Hz Sample Specifi cations: Section Page F. This product may be covered by one or more of the following patents and other patent(s) pending: US Patent 7,931,473 & 8,128,360 DESCRIPTION: SUBMERSIBLE NON-CLOG PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. WARNING: CANCER AND REPRODUCTIVE HARM - Specifications: DISCHARGE... 6", 1 lb. Horizontal Flange Slotted to accommodate 1mm ISO Flanges LIQUID TEMPERATURE F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Ductile Iron ASTM A-6, IMPELLER: Design... Vortex, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-6, SHAFT Stainless Steel O RINGS... Buna-N HARDWARE Series Stainless Steel LIFTING BAIL Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware Series Stainless CORD ENTRY... ft. (12.1m) Cord. Rigid quick change epoxy-potted housing POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED... 17, 11 or 870RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... White Iron Impeller, Seal Material, Impeller Trims, Cord Length MARKINGS... CSA WEIGHT lbs (484 Kg) SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel Leg Kit C US LR /18
3 Series 6SHV 32 Frame Driver Specifications: DISCHARGE... 6", 1 lb. Horizontal Flange Slotted to accommodate 1mm ISO Flanges LIQUID TEMPERATURE F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Cast Iron ASTM A-48, Class 30 IMPELLER: Design... Vortex, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-6, SHAFT Stainless Steel O RINGS... Buna-N HARDWARE Series Stainless Steel LIFTING BAIL Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware Series Stainless CORD ENTRY... ft. (12.1m) Cord. Rigid quick change epoxy-potted housing POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED... 17, 11 or 870RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... White Iron Impeller, Seal Material, Impeller Trims, Cord Length MARKINGS... CSA WEIGHT lbs (762 Kg) SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel Leg Kit C US LR16567 Series: 6SHV HP, 17RPM, 60Hz - 100HP, 11RPM, 60Hz 40 - HP, 870RPM, 60Hz Sample Specifi cations: Section Page F. This product may be covered by one or more of the following patents and other patent(s) pending: US Patent 7,931,473 & 8,128,360 DESCRIPTION: SUBMERSIBLE NON-CLOG PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. WARNING: CANCER AND REPRODUCTIVE HARM /18
4 Series 6SHVL 21 Frame Driver inches (mm) 28 Frame Driver Optional Leg Kit - p/n 16 IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS 1 DIVISION 1 HAZARDOUS LOCATIONS. 4 3/18
5 Series 6SHVL 32 Frame Driver inches (mm) Optional Leg Kit - p/n 16 IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS 1 DIVISION 1 HAZARDOUS LOCATIONS. 5 3/18
6 Series 6SHVT 28 Frame Driver inches (mm) 32 Frame Driver Optional Leg Kit - p/n 16B IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS 1 DIVISION 1 HAZARDOUS LOCATIONS. 6 3/18
7 Series 6SHVL 17RPM MODEL NO 6SHVL1N HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR E LOCKED ROTOR DRIVER FRAME 21 CORD P/N CORD SIZE /4-18/ /4-18/4 6SHVL E /4-18/4 6SHVL G /4-18/ /4-18/4 6SHVL J /4-18/4 6SHVL J /4-18/ SHVL G /4-18/ SHVL G /4-18/4 6SHVL G /4-18/4 6SHVL E /4-18/4 SHVL Pump 6SHVL F /4-18/4 6SHVL F /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL G /4-18/4 6SHVL G /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - Feet, XJ - 75 Feet, or XL Feet. Cord sold separately. * Select impeller diameter when ordering. 7 5/18
8 Series 6SHVL 11RPM MODEL NO 6SHVL75N6 7.5 HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR J LOCKED ROTOR DRIVER FRAME 21 CORD P/N 1496 CORD SIZE 12/4-18/ SHVL J /4-18/4 6SHVL100N F /4-18/ /4-18/4 6SHVL F /4-18/4 6SHVL1N H /4-18/ /4-18/4 6SHVL H /4-18/4 6SHVL H /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL G /4-18/4 6SHVL G /4-18/4 6SHVL G /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 6SHVL E /4-18/4 SHVL Pump IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - Feet, XJ - 75 Feet, or XL Feet. Cord sold separately. 8 11/18
9 Series 6SHVT 11RPM MODEL NO HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR LOCKED ROTOR DRIVER FRAME 6SHVT H /4-18/4 6SHVT H /4-18/4 6SHVT F /4-18/4 6SHVT F /4-18/4 6SHVT H /4-18/4 6SHVT H /4-18/4 6SHVT E /4-18/4 6SHVT E /4-18/4 CORD P/N CORD SIZE 6SHVT J /4-18/4 6SHVT J /4-18/4 6SHVT J /4-18/4 6SHVT H /4-18/4 6SHVT H /4-18/4 6SHVT H /4-18/4 6SHVT F /4-18/4 SHVT Pump 6SHVT F /4-18/4 6SHVT F /4-18/4 6SHVT F /4-18/4 6SHVT F /4-18/4 6SHVT D /4-18/4 6SHVT D /4-18/4 IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - Feet, XJ - 75 Feet, or XL Feet. Cord sold separately. * Select impeller diameter when ordering. 9 5/18
10 Series 6SHVL Performance Curve HP, 17RPM, 60Hz STANDARD IMPELLER SIZES mm 310 mm 290 mm Pump HP Impeller Dia. mm (in.) 330 (12.99) 295 (11.61) 280 (11.02) 260 (10.24) 2 (9.) 210 (8.27) 200 (7.87) 190 (7.48) * 56.2 * Select impeller diameter when ordering mm mm hp Head - ft mm mm mm 75 hp 190 mm hp hp 20 hp hp 30 hp 40 hp hp US gpm 10 2/16
11 Series 6SHVL Performance Curve HP, 11RPM, 60Hz 6SHVL Pump 11 2/12
12 Series 6SHVT Performance Curve - 100HP, 11RPM, 60Hz mm 4 mm 15 STANDARD IMPELLER SIZES Pump HP Impeller Dia. mm (in.) 365 (14.37) 340 (13.39) * * mm 52 * Select impeller diameter when ordering mm mm mm 54 Head - ft mm hp 60 hp hp 75 hp US gpm 12 2/16
13 Series 6SHVT Performance Curve 20 - HP, 870RPM, 60Hz STANDARD IMPELLER SIZES mm 4 mm 415 mm Pump HP Impeller Dia. mm (in.) 395 (15.) 375 (14.76) * * * * Select impeller diameter when ordering mm mm mm Head - ft 340 mm 57 hp hp 30 hp 20 hp hp 30 hp US gpm 13 2/16
Series 8SHDU. Specifications: Series: 8SHDU 25-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3.50" Spherical Solids Handling
www.cranepumps.com Series 8SHDU 21 Frame Driver Specifications: DISCHARGE... 8", 125 lb. Horizontal Flange Slotted to accommodate 200mm ISO Flanges LIQUID TEMPERATURE... 4 F (40 C) Continuous VOLUTE...
More informationSeries 6XSHD. Specifications: Series: 6XSHD 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling
www.cranepumps.com Series 6XSHD 21 Frame Driver Specifications: DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...
More informationSeries 4XSHV. Specifications: Series: 4XSHV , 3450RPM, 60Hz 2-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling
Series 4XSHV 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,
More informationSeries 6SHM. Specifications: Series: 6SHM 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling
www.cranepumps.com Series 6SHM 21 Frame Driver Specifications: DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...
More informationSeries 4XSHD. Specifications: Series: 4XSHD 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling
www.cranepumps.com Series 4XSHD 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...
More informationSeries 4XSHM 18 Frame Driver 3" Spherical Solids Handling
Series 4XSHM 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accomodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48,
More informationSeries 4SHM. Specifications: Series: 4SHM 3-10HP, 1750RPM, 60Hz. 18 Frame Driver 3" Spherical Solids Handling. Solids Handling Submersible Pumps
www.cranepumps.com Series 4SHM 18 Frame Driver Specifications: DISCHARGE... 4, 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE... 104 F (40 C) Continuous VOLUTE...
More informationAMPRO ELECTRIC LTD. Series 6SHV 21 Frame Driver 3" Spherical Solids Handling. Specifications: Series: 6SHV HP, 1750RPM, 1150RPM, 60Hz
21 Frame Driver Specifications: DISCHARGE...6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE...104 F (40 C) Continuous VOLUTE...Cast Iron ASTM A-48, Class 30 WEAR
More informationSeries 3SHM. Specifications: Series: 3SHM 2-7.5HP, 1750RPM, 60Hz. 18 Frame Driver 2.5" Spherical Solids Handling. Solids Handling Submersible Pumps
Series 3SHM 18 Frame Driver 2.5" Spherical Solids Handling Specifications: DISCHARGE...3, 125 lb. Horizontal Flange Slotted to accommodate 80mm ISO Flanges LIQUID TEMPERATURE...104 F (40 C) Continuous
More informationB. OTHER SUBMERSIBLE DEWATERING PUMPS
SELECTION GUIDE I & O MANUALS. OTHER SUMERSILE DEWATERING PUMPS PUMP SERIES: SED.5HP, 1750RPM, 2 NPT 70.7HP, 120 Volt, 3450RPM 71.7HP, 240 Volt, 3450RPM 125 1.25HP, 120 Volt, 3450RPM 126 1.25HP, 240 Volt,
More informationBARNES. INSTALLATION and OPERATION MANUAL Solids Handling Submersible Pump
BARNES INSTALLATION and OPERATION MANUAL Solids Handling Submersible Pump 18 Frame 3XSHV Vortex Pumps 5-10HP, 3450RPM 3XSHM Monovane Pumps 2-5HP, 1750RPM 4XSHV Vortex Pumps 7.5-10HP, 3450RPM 4XSHM Monovane
More informationSeries SFA Hz, 3450RPM. Submersible. ADI Water Garden Pumps
AQUASCAPE Series SFA500 DISCHARGE... 2 NPT, Female, Vertical LIQUID TEMPERATURE... 04 F (40 C) Continuous MOTOR FRAME... 300 Series Stainless Steel END BELLS... 300 Series Stainless Steel VOLUTE... Nylon
More informationMYERS MODELS 4R AND 4RX
MYERS MODELS 4R AND 4RX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4R) AND HAZARDOUS LOCATION (4RX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4R AND 4RX Solids Handling Wastewater Pumps The Right Choice
More informationKW Submersible, Single-Vane Impeller
Sewage Pumps KW Submersible, Single-Vane Impeller Performance Curve Total Head (FT) Up to 2 Solids-Handling Heavy-Duty, Silicon Carbide Seals Stainless Steel Keyed Shaft Flows to 325 GPM / Heads to 95
More informationMYERS MODELS 4RC AND 4RCX
3450 RPM 1150 and 1750 RPM MYERS MODELS 4RC AND 4RCX SOLIDS HANDLING WASTEWATER PUMPS (4RCX only) STANDARD (4RC) AND HAZARDOUS LOCATION (4RCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4RC AND 4RCX Solids
More informationPump Specifications LE100-Series 1HP Submersible Sewage Pump
Pump Specifications LE100-Series 1HP Submersible Sewage Pump LE100-P1 R8/5/2014 Copyright 2014 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE100-Series Dimensional
More informationMYERS MODELS 4VC & 4VCX
MYERS MODELS 4VC & 4VCX 4" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4VC) AND HAZARDOUS LOCATION (4VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4VC & 4VCX Solids Handling Wastewater Pumps Cut Your Pumping
More informationMYERS MODELS 6VC & 6VCX
MYERS MODELS 6VC & 6VCX 6" SOLIDS HANDLING WASTEWATER PUMPS STANDARD (6VC) AND HAZARDOUS LOCATION (6VCX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 6VC & 6VCX Solids Handling Wastewater Pumps High Operating
More informationMYERS MODELS 4V AND 4VX
MYERS MODELS 4V AND 4VX SOLIDS HANDLING WASTEWATER PUMPS STANDARD (4V) AND HAZARDOUS LOCATION (4VX) CONSTRUCTION WWW.FEMYERS.COM MYERS MODELS 4V AND 4VX Solids Handling Wastewater Pumps The Right Choice
More informationMYERS 4VCDP. 4" Solids Handling
MYERS 4VCDP Standard Submersible Dry Pit 4" Solids Handling Wastewater Pumps WWW.FEMYERS.COM TECHNICAL INFORMATION 2 SMOOTH OPERATION The 4VCDP submersible dry pit wastewater pumps are a heavy-duty 4"
More informationNOTE: LEH100-Series high-head pumps require a minimum application of 15' head. Do not use pump in this area use a smaller pump.
Pump Specifications LEH100-Series 1HP Submersible Sewage Pump NOTE: LEH100-Series high-head pumps require a minimum application of 15' head. Do not use pump in this area use a smaller pump. LEH100-P1 R12/19/2012
More informationMYERS 3MW VERTICAL DISCHARGE WASTEWATER PUMPS. Sewage, high-capacity sump, effluent
The Myers heavy-duty series pumps are designed for residential raw sewage and light commercial applications. The non-clogging two-vane impeller delivers high-efficiency pumping and easily handles trashy
More informationGR NDER PUMPS. 505 Woodland Rd., Mt. Pocono, PA Phone: (570) Fax: (570)
U.S.A. 505 Woodland Rd., Mt. Pocono, PA 18344 Phone: (570) 851-0075 Fax: (570) 216-4570 www.grinderpumpsusa.com sales@grinderpumpsusa.com GRINDER PUMPS GPU2-21 2 HP Grinder Pump 2 Piece Motor Housing
More informationGR NDER PUMPS. Technical Catalog
Technical Catalog GR NDER PUMPS U.S.A. 505 Woodland Rd., Mt. Pocono, PA 18344 Phone: (570) 851-0075 Fax: (570) 216-4570 www.grinderpumpsusa.com sales@grinderpumpsusa.com GRINDER PUMPS GPU2-21 1½ HP Grinder
More informationJDL SYSTEMS Submersible Sump / Sewage Pumps Table of Contents Project: Model: Chk d: Date:
Table of Contents Project: Model: Chk d: Date: Model JCSN 2JCSN2 (2 HP) 3JCSN2 (2 HP) 3JCSNY2 (2 HP) 3JCSN3 (3 HP) 3JCSNY3 (3 HP) 3JCSN ( HP) 3JCSNY ( HP) 3JCSN7 (7. HP) 3JCSNY7 (7. HP) 3JCSN1 (1 HP) 3JCSNY1
More informationPump Specifications LE70-Series 3/4 HP Submersible Sewage Pump
Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump LE70-P1 R9/3/2013 Copyright 2013 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE70-Series Dimensional
More informationPump Specifications LE70-Series 3/4 HP Submersible Sewage Pump
Pump Specifications LE70-Series 3/4 HP Submersible Sewage Pump LE70-P1 R3/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE70-Series Dimensional
More informationINSTALLATION and OPERATION MANUAL Solids Handling Submersible Pump
INSTALLATION and OPERATION MANUAL Solids Handling Submersible Pump #2 Frame Series: 7365 3M & 3MA Monovane Pumps 2-7.5HP, 1750RPM 3VR & 3VRA Vortex Pumps 2-10HP, 3450 & 1750RPM 4M & 4ML Monovane Pumps
More informationSKHS SERIES 2 HP 1-1/2 HP 1 HP 1/2 HP CAPACITY-U.S. G.P.M.
Performance RPM: 3450 Discharge: 2" Solids: 2" Wholesale Products Page: 6560-1 Section: Performance 80 70 2 HP TOTAL DYNAMIC HEAD-FEET 60 50 40 30 20 1 HP 1-1/2 HP 1/2 HP 10 0 0 32 64 96 128 160 192 CAPACITY-U.S.
More informationContents Project: Model: Chk d: Date:
Contents Model DSHU6. DSHU6.7 DSHU6. DSU6. DSHU6. DSU6.7 DSHU6.7 8DSU6. 8DSHU6. 8DSU6.7 8DSHU6.7 DSU6. DSU67. Section Page Specifications -7, 8 Selection Chart -7., 8. Performance Curves -6 Outline Drawings
More informationINSTALLATION and OPERATION MANUAL Solids Handling Submersible Pump
INSTALLATION and OPERATION MANUAL Solids Handling Submersible Pump #3 Frame 3VRA Vortex Pumps 15-30HP, 3450RPM 4ML Monovane Pumps 15HP, 1750RPM 4MM Monovane Pumps 15-30HP, 1750RPM 4MH Monovane Pumps 30HP,
More informationPump Specifications FL150 Series Submersible Effluent Pump
Pump Specifications FL150 Series Submersible Effluent Pump FL150_P1 R3/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. FL150-Series Dimensional
More informationDSZ3. EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model
Contents Model A0553 C1125 V0494 A0713 C1285 V0554 A0843 C1455 V0754 A1003 C1605 V0854 C1915 V0974 C2185 V1154 C2905 Section Page Specifications 3-203 Model Designation 3-206 Impeller Data 3-208 Material
More informationPump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump
Pump Specifications LE40 Series 4/10 HP Submersible Sewage Pump Pump LE40_P1 R8/17/2017 Copyright 2017 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE40-Series
More informationPump Specifications. LE50 Series ½ HP Submersible Sewage Pump
Pump Specifications LE50 Series ½ HP Submersible Sewage Pump LE50_P1 R11/16/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. LE50-Series Dimensional
More informationHYDROMATIC SPX50/SPX50H EXPLOSION PROOF, SEWAGE EJECTOR
PERFORMANCE DATA Wholesale Products Page: 6800-1 SPX50 RPM: 1750 Discharge: 2 Solids: 2 SPX50H RPM: 1750 Discharge: 1 ½ Solids: ¾ 40 35 TOTAL HEAD IN FEET 30 25 20 SPX50 SPX50H 15 10 0 10 20 30 40 50 60
More informationLITERS PER MINUTE TOTAL HEAD IN FEET TOTAL HEAD IN METERS GALLONS PER MINUTE
TOTAL HEAD IN FEET TOTAL HEAD IN METERS Pump Specifications PRG - SERIES Residential Grinder Pump 60 LITERS PER MINUTE 0 20 40 60 80 100 120 140 160 180 18 50 16 14 40 12 30 10 8 20 6 10 4 2 0 0 0 10 20
More informationHYDROMATIC SKHS SERIES SUBMERSIBLE NON-CLOG, SEWAGE EJECTOR
PERFORMANCE DATA Wholesale Products Page: 6560-1 RPM: 450 Discharge: 2 Solids: 2 80 70 2 HP 60 TOTAL DYNAMIC HEAD-FEET 50 40 0 1 HP 1-1/2 HP 1/2 HP 20 10 0 0 2 64 96 128 160 192 CAPACITY-U.S. G.P.M. The
More informationXLE50 FLOW RATE (LPM) Flow Rate (GPM)
Pump Specifications XLE50 Series ½ HP Submersible Sewage Pump For Hazardous Locations Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIB 25 XLE50 FLOW RATE (LPM) 0 100 200 300 400 500
More informationPump Specifications FL50 Series 1/2 hp Submersible Effluent Pump
Head (Feet) Head (Meters) Pump Specifications FL50 Series 1/2 hp Submersible Effluent Pump Flow (Liters Per Minute) 60 0 38 76 114 151 189 227 265 303 341 379 18 50 15 40 12 30 9 20 6 10 3 0 0 0 10 20
More informationSPD50H/100H. Performance Data SPD100H SPD50H. Wholesale Products Page: Section: Performance Data Dated: April 2002 Supersedes: January 2001
Performance SPD50H/100H RPM: 3450 Discharge: 2" Solids: 3/4" Wholesale Products Page: 6130-1 Section: Performance Dated: April 2002 Supersedes: January 2001 SPD50H SPD100H The curves reflect maximum performance
More informationPump Specifications FL100 Series Submersible Effluent Pump
Head (Feet) Head (Meters) Pump Specifications FL100 Series Submersible Effluent Pump Flow (Liters Per Minute) 100 0 38 76 114 151 189 227 265 303 341 379 416 30 90 27 80 24 70 21 60 18 50 15 40 12 30 9
More informationPump Specifications. ELV Series Submersible Sump Pump with OilTector Control. ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp
Pump Specifications ELV Series Submersible Sump Pump with OilTector Control ELV250 1/3 hp ELV280 1/2 hp ELV290 3/4 hp ELV_ P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications
More informationSKV40. Performance Data. Wholesale Products Page: Section: Performance Data Dated: January RPM: 1550 Discharge: 2" Solids: 2" GPM: TDH:
Performance RPM: 1550 Discharge: 2" Solids: 2" Wholesale Products Page: 6730-1 Section: Performance 8 25 7 20 HEAD-METERS 5 4 HEAD-FEET 15 4/10 HP 3 10 2 0 0 20 40 60 80 Capacity-U.S. G.P.M. Liters/Second
More informationHYDROMATIC SK75/100 SUBMERSIBLE SEWAGE EJECTOR
SK75/100 PERFORMANCE DATA Wholesale Products Page: 6300-1 RPM: 1750 Discharge: 2 Solids: 2 12 40 HEAD-METERS 9 6 3 TOTAL HEAD IN FEET 30 20 10 SK75 SK100 0 0 Capacity-U.S. G.P.M. 0 20 40 60 80 100 120
More informationXFL70 FLOW RATE (LPM) Flow Rate (GPM)
Pump Specifications XFL70 Series ¾ HP Submersible Effluent Pump For Hazardous Locations Class 1, Division 1 Groups C & D Class 1, Zone 1 and Groups IIA & IIB 50 XFL70 FLOW RATE (LPM) 0 50 100 150 200 250
More informationKG(X)3. Grinder Pumps. 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve. Total Head (FT) Capacity (GPM)
Grinder Pumps 3HP High Flow Grinder Pump (Class 1, Div. 1, Groups C & D Hazardous Location) The KEEN PUMP series centrifugal grinder pumps easily handle residential, commercial or industrial sanitary waste,
More informationHYDROMATIC SPD50H/100H SUBMERSIBLE HIGH HEAD, DOUBLE SEAL EFFLUENT
PERFORMANCE DATA Wholesale Products Page: 6130-1 Supersedes: April 2002 RPM: 3450 Discharge: 2 Solids: ¾ SPD50H SPD100H HEAD-METERS 18 12 6 TOTAL HEAD IN FEET 60 40 20 0 0 Capacity-U.S. G.P.M. SPD50H SPD100H
More informationPump Specifications 290 Series 3/4 hp Submersible Effluent Pump
Pump Specifications 290 Series 3/4 hp Submersible Effluent Pump 290_P1 R09/7/2011 Copyright 2011 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 290-Series Dimensional
More informationPump Specifications 280 Series 1/2 hp Submersible Effluent Pump
Pump Specifications 280 Series 1/2 hp Submersible Effluent Pump 280_P1 R01/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 280-Series Dimensional
More informationPump Specifications FL60/FLH60 Series 6/10 hp Submersible Effluent Pump
Head (Feet) Head (Meters) Pump Specifications FL60/FLH60 Series 6/10 hp Submersible Effluent Pump 70 Flow (Liters Per Minute) 0 38 76 114 151 189 227 265 303 341 379 21 FLH 60 60 FL 60 18 50 15 40 12 30
More informationEBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model
Contents Model A0553 C1125 V0494 A0713 C1285 V0554 A0843 C1455 V0754 A03 C15 V0854 C1915 V0974 C2185 V1154 C2905 Section Page Specifications 3-3 Model Designation 3-6 Impeller Data 3-8 Material Specifications
More informationTechnical Data 5430 M & W SUBMERSIBLE SOLIDS HANDLING PUMPS
Technical Data 5430 M & W SUBMERSIBLE SOLIDS HANDLING PUMPS Wet End Rotation Volute Nozzles Impeller Wear Rings Shaft Bearing Frame Bearing Radial/Thrust Lubrication Seal Motor Lifting Bail Volute Discharge
More informationPump Specifications. D3648LSG, D3648LSGX Series Omnivore 2HP Duplex Grinder Packages LITERS PER SECOND
Pump Specifications D3648LSG, D3648LSGX Series Omnivore 2HP Duplex Grinder Packages LITERS PER SECOND 200 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 60 190 180 170 160 LSGX - TWO STAGE 50 150 140 130 40 FT. OF HEAD
More information8VL and 8VLX. UÒ=pìÄãÉêëáÄäÉ=kçåJ`äçÖ=t~ëíÉï~íÉê=mìãé pí~åç~êç=eusif=~åç=bñéäçëáçåjmêççñ=eusiuf
8VL and 8VLX UÒ=pìÄãÉêëáÄäÉ=kçåJ`äçÖ=t~ëíÉï~íÉê=mìãé pí~åç~êç=eusif=~åç=bñéäçëáçåjmêççñ=eusiuf ADVANTAGES BY DESIGN HIGH EFFICIENCY HYDRAULIC DESIGN CUTS PUMPING COSTS AND EXTENDS LIFE OF FLUID END COMPONENTS.
More informationPump Specifications 250 Series Submersible Sump / Effluent Pump
Pump Specifications 250 Series Submersible Sump / Effluent Pump 250_P1 R1/24/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 250-Series Dimensional
More informationPump Specifications. Omnivore 2HP Submersible Grinder Pumps LSG200-SERIES (SINGLE STAGE) LSGX200-SERIES (TWO STAGE)
Pump Specifications LSG200-SERIES (SINGLE STAGE) LSGX200-SERIES (TWO STAGE) Omnivore 2HP Submersible Grinder Pumps LSG200_P1 R9/30/2011 Copyright 2011 Liberty Pumps Inc. All rights reserved. Specifications
More informationPump Specifications 405 Series Commercial Drain Pump (High-Temp)
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 405_P1 R8/22/2017 Copyright 2017 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 405-Series Dimensional
More informationSPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649
More informationLITERS PER MINUTE GALLONS PER MINUTE
TOTAL HEAD IN FEET TOTAL HEAD IN METERS Pump Specifications D3684LSG, D3684LSGX Omnivore 2HP Duplex Grinder Packages LITERS PER MINUTE 200 190 180 170 160 150 140 130 0 50 100 150 200 LSGX - TWO STAGE
More information4500C Series Vortex Pumps
Section 009 Page 003 4500C Series Vortex Pumps Table of Contents 4500C Performance 2" x 2" - 4523C, Multiple Speed... 004 3" x 3" - 4523C, Multiple Speed... 004 4" x 4" - 4522C, Multiple Speed... 005 4"
More informationSeries B40. Specifications: B40-9H B40-9D B40-8F. Pump End 4" Flange. Self-Priming Universal/Electric Driven DESCRIPTION:
Series B 4" Flange Specifications: Series: DESCRIPTION: B-X B-9H B-9D B-8F SELF-PRIMING CENTRIFUGAL PUMPS DESIGNED FOR MARINE, MUNICIPAL AND INDUSTRIAL APPLICATIONS SUCTION/DISCHARGE... 4" (2mm) x 4" (2mm)
More informationSPECIFICATIONS SEWAGE/SUMP DUPLEX SYSTEM ZOELLER COMPANY SUBMERSIBLE SEWAGE OR DEWATERING PUMPS
Your Peace of Mind is Our Top Priority Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347
More informationCENTERLINE DISCHARGE. Technical Data 5730 MV 490 FRAME PULL-UP SUBMERSIBLE,
Technical Data 5730 MV 490 FRAME PULL-UP SUBMERSIBLE, CENTERLINE DISCHARGE CABLE Power and control cable are UL Listed and CSA Approved. ELECTRICAL CONNECTION Double-seal system with strain relief, consisting
More informationSeries B30. Specifications: Pump End 3" Flange. Self-Priming Universal/Electric Driven DESCRIPTION:
Specifications: " Flange SUCTION/DISCHARGE... " (76mm) x " (76mm) 1lb. Flange LIQUID TEMPERATURE...160 F (71 C) Continuous VOLUTE/WEARPLATE...Cast Iron ASTM A-48, Class, Replaceable, External Clearance
More informationModels: PO3LA, PO3LB 1-1/2" & 2-1/2" Spherical Solids Handling Universal Drive
www.cranepumps.com Specifications: Models: POLA, POLB 1-1/" & -1/" Spherical Solids Handling Universal Drive SUCTION/DISCHARGE... (76mm) x " (76mm) 1 lb. Flange LIQUID TEMPERATURE...160 F (71 C) Continuous
More information50 Hz Products. Commercial Duty Pumps Heavy Duty Solids Handling Pumps Grinder Pumps Lift Station Accessories. Trusted. Tested. Tough.
Hz Products Commercial Duty Pumps Heavy Duty Solids Handling Pumps Grinder Pumps Lift Station Accessories Trusted. Tested. Tough. WHAT SETS ZOELLER PUMPS APART? Since 199, Zoeller Company has been manufacturing
More informationKGX2-21. Grinder Pumps. 2HP Dual Seal Grinder Pump, External Start (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve
Grinder Pumps Your Premier Pump Choice KGX2-21 2HP Dual Seal Grinder Pump, External Start (Class 1, Div. 1, Groups C & D Hazardous Location) The KEEN PUMP KGX2-21 series centrifugal grinder pumps easily
More informationSPECIFICATIONS EFFLUENT/SUMP DUPLEX SYSTEM ZOELLER SUBMERSIBLE DEWATERING OR EFFLUENT PUMPS
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649
More information3312 Model. pumping Model Model AURORA Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS
3312 Model pumping 3314 Model 3311 Model AURORA 3310 Series HORIZONTAL AND VERTICAL CLOSE-COUPLED PUMPS WWW.AURORAPUMP.COM AURORA 3310 Series Horizontal and Vertical Close-Coupled Pumps Capacities to 3800
More informationSeries 8SH 8SH Standard 21 Frame HP, 1750RPM
www.cranepumps.com 25-30 HP, 1750RPM MODEL PART NO. 8SHDU25044 139471 8SHDU25054 139472 8SHDU30044 139559 8SHDU30054 139560 Manual: 125508 1 7.5-20 HP, 1150RPM www.cranepumps.com MODEL PART NO. 8SHDU75N6
More informationP U M P. Pumps for Municipal and Commercial Operations
P U M P Pumps for Municipal and Commercial Operations Ashland Pump The Ashland Pump Company designs, manufactures, and distributes an extensive line of durable, dependable products for use in the Plumbing,
More informationINSTALLATION and OPERATION MANUAL Solids Handling Submersible Pump
INSTALLATION and OPERATION MANUAL Solids Handling Submersible Pump 28 Frame 3SHV Vortex Pumps 20-40HP, 3450RPM 4SHV Vortex Pumps 20-50HP, 3450RPM 4SHM Monovane Pumps 20-60HP, 1750RPM 20-30HP, 1150RPM 4SHD
More informationSUBMERSIBLE GRINDER PUMPS: MOTORS: FLOWS to 135 USGPM HEADS to 350 FT TDH SEMI-OPEN, MULTI-VANE, IMPELLER DUPLEX STAINLESS STEEL GRINDING MECHANISM
SUBMERSIBLE GRINDER PUMPS: DRY PIT WET PIT PORTABLE MOTORS: 2-POLE: 7.5-19 HP 4-POLE: 7.5 HP 230V-460V-575V/3PH/60HZ FLOWS to 135 USGPM HEADS to 350 FT TDH SEMI-OPEN, MULTI-VANE, IMPELLER DUPLEX STAINLESS
More informationCASING COVER PLATE LUBRICATION GASKETS PRESSURE RELIFE VALVE SEAL OPTIONAL EQUIPMENT
Series: PFSPT Self-Priming Centifugal Pumps Size: x, Solids -1/ DISCHARGE x, lbs. Flange LIQUID TEMPERATURE 1 F CASING IMPELLER SHAFT SHAFT SLEEVE WEAR RING COVER PLATE FLAP VALVE Gray Iron ASTM A- Class
More informationEFQT/EFQU. EBARA Self Priming Trash Pump. Contents Project: Model: Chk d: Date:
Contents Section Page Model Designation 2 Features 3 Standard Specifications 5 Specifications 6 Selection Chart 7 Suction Speed Flow Chart 9 Performance Curves 10 Dimension Drawings 20 Model Designation
More informationSeries 4SH 4SH Standard 18 Frame HP, 3450RPM
7.5-10 HP, 3450RPM MODEL PART NO. 4SHVA75N2 133650 4SHVA7552 133651 4SHVA100N2 133652 4SHVA10052 133653 Manual: 133030 4SHVB75N2 133655 4SHVB7552 133656 4SHVB100N2 133657 4SHVB10052 133658 1 2-10 HP, 1750RPM
More informationBARNES. INSTALLATION and OPERATION MANUAL Submersible Sewage Non-Clog Pumps
BARNES INSTALLATION and OPERATION MANUAL Submersible Sewage Non-Clog Pumps Series: Series: Series: 4SE-L, 1.9 & 2.8HP 1150RPM, 60Hz 4SE-L, 2.8, 3.7 & 5HP 1750RPM, 60Hz 4SE-L, 5HP 3450RPM, 60Hz Series:
More informationOIL SMART PLUG AND PLAY SYSTEM, Model #OSS-100
OIL SMART PLUG AND PLAY SYSTEM, Model #OSS-100 The Oil Smart OSS-100 System, when combined with a manual sump pump, will automatically pump water without the risk of pumping oil into the environment. Additionally,
More informationTRITUS. Submersible pumps with grinder
TRITUS Submersible pumps with grinder Filthy water Domestic use Civil use PERFORMANCE RANGE Flow rate up to 26 l/min (5.6 m³/h) Head up to 3 m APPLICATION LIMITS m maximum immersion depth (with a sufficiently
More information50 Hz PX CHANNEL 1. Performance curves. data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s. Tolerances acc.
Performance curves 50 Hz [m] 11,6 data refered to : W ater, pure [100%] ; 20 C; 0,9983kg/ dm³; 1,001mm²/ s Head Tolerances acc. ISO 9906 Annex A 11,2 10,8 10,4 10 9,6 9,2 8,8 8,4 8 7,6 7,2 6,8 6,4 6 5,6
More informationTrash Hog II Self Priming Solids Handling Centrifugal Pumps
Trash Hog II Self Priming Solids Handling Centrifugal Pumps Marlow Pumps ITT Industries Trash Hog II A Full Range of Product Features Industrial Duty Power End Provides rigid shaft support. Ample oil
More informationProduct Numbering System Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC Pump Assembly, Types AC & AE
Index Sheet ITEM S Bulletin Product Numbering System... 1 Typical Specifi cations, Models 4AC, 4AE, 6AC, 6AE, 8AC... 2 Pump Assembly, Types AC & AE... 3-4 Dimensions, Types AC & AE... 5-8 Selection Curves,
More informationCGUII/CGFU. Model CGUII/CGFU Contents. EBARA PRO Cast Grinder Pumps. Model 32CGUII61.5S
Model Contents Model 3CGUII6.5S 3CGFU6.5S 3CGFU6.5 5CGFU6.S 5CGFU6. 5CGFU63.7S 5CGFU63.7 Section Page Specifications 8 Selection Chart 83 Performance Curves 86 Dimensions 88 Sectional View 83 QDC Information
More informationModel: PO6LB 3" Spherical Solids Handling Universal Drive
Model: PO6LB 3" Spherical Solids Handling Universal Drive Self-Priming, Solids Handling Pumps Specifications: Model: PO6LB-12F PO6LB-11J PO6LB-N SUCTION/DISCHARGE...6 (12mm) x 6" (12mm) 1 lb. Flange LIQUID
More informationSeries B40 Pump End 4" Flange
Series B 4" Flange www.cranepumps.com Specifications: Series: B-X B-9H B-9D B-8F SUCTION/DISCHARGE... 4" (2mm) x 4" (2mm) 1lb. Flange LIQUID TEMPERATURE...1 F (71 C) Continuous VOLUTE/WEARPLATE...Cast
More information3800 Series. Single Stage End Suction Pumps. Capacities to 4200 G.P.M. (954 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (149 C)
3800 Series Single Stage End Suction Pumps Capacities to 200 G.P.M. (95 m 3 /hr) Heads to 520 Feet (180 Meters) Temperatures to 300 F (19 C) MODEL 380 Aurora 3800 Pump Setting New Standards of Efficiency
More informationSPECIFICATIONS EFFLUENT/SUMP SIMPLEX SYSTEM ZOELLER SUBMERSIBLE DEWATERING OR EFFLUENT PUMPS
Product information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. MAIL TO: P.O. BOX 16347 Louisville, KY 40256-0347 SHIP TO: 3649
More informationBARNES. INSTALLATION and OPERATION MANUAL Submersible Sewage Non-Clog Pumps
BARNES INSTALLATION and OPERATION MANUAL Submersible Sewage Non-Clog Pumps Series: Series: Series: 4SE-L, 1.9 & 2.8HP 1150RPM, 60Hz 4SE-L, 2.8, 3.7 & 5HP 1750RPM, 60Hz 4SE-L, 5HP 3450RPM, 60Hz IMPORTANT!
More informationMODEL 7ASX-8 SPECIFICATION
MODEL 7ASX-8 SPECIFICATION 1.0 General Specifications There shall be furnished one (1) one only Grind Hog TM Model 7ASX-8 HEAVY DUTY Comminutor as manufactured by G.E.T. Industries Inc. with rotation in
More informationCentrifugal End Suction Fire Pumps
Centrifugal End Suction Fire Pumps 1 Centrifugal End Suction Fire Pumps Product Overview American-Marsh Model FP-REF End Suction pumps are used in a variety of fire protection services every day. These
More informationSeries: GA6-1½, GA6-2, GA7-1¼, GA7-1½
Series: GA6-1½, GA6-2, Features FOUR POSITION CASING Discharge can be located in any of four positions. Casing is close grain iron of 30,000 psi minimum tensile strength. Back pull-out design eliminates
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationTrash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service
Trash- and Solids-Handling Centrifugal Pumps Series 2100 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Liquids Entrained with Solids General Industrial, Pulp & Paper,
More informationM50 L50 Series Multistage Regenerative Turbine Pumps
Page M- MTH PUMPS M L Series Multistage Regenerative Turbine Pumps Capacities to 4 GPM Heads to Feet Single or Multi-stage Units (up to stages) Vertical Close Coupled Horizontal Close Coupled Horizontal
More information390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
More informationSimplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, w/fiberglass Cover
www.cranepumps.com Simplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, w/fiberglass Cover Specifications: inches (mm) BASIN...Fiberglass w/ 3 (76)
More informationD51 D61 D71 D91 Series
MTH PUMPS D51 D61 D71 D91 Series Page D-1 Capacities to 24 GPM Heads to 36 Feet Horizontal Close Coupled Close-coupled centrifugal pumps from MTH provide economical performance up to 24 GPM applications
More informationCommercial Sewage & Waste Water Systems
Commercial Sewage & Waste Water Systems EDP-4 72 Gallon 24 x 36 Basin EDP-6 108 Gallon 30 x 36 Basin EDP-8 158 Gallon 36 x 36 Basin 1/2 HP pump 2 PVC Sch 80 discharge, 3 float switches and cover 2 NPT,
More informationbarmesapumps.com BP33 & BP & RPM Installation, Operation & Maintenance Manual Submersible Sump / Utility Pumps
Installation, Operation & Maintenance Manual Submersible Sump / Utility Pumps BP33 & BP50 0.3 & 0.5 HP @ 3450 RPM IMPORTANT! - Read all instructions in this manual before operating or servicing a pump.
More information