Series 6XSHD. Specifications: Series: 6XSHD 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz. 21 Frame Driver 3" Spherical Solids Handling

Transcription

1 Series 6XSHD 21 Frame Driver Specifications: DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 WEAR RING... C954 Lead-Free Bronze MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Cast Iron ASTM A-48, Class 30 IMPELLER: Design... Enclosed Dual Vane, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-536, --12 SHAFT Stainless Steel O RINGS... Buna-N HARDWARE Series Stainless Steel LIFTING BAIL Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware Series Stainless CORD ENTRY... Custom Molded, Quick Connected for Sealing and Strain Relief POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED or 1150RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... White Iron Impeller, Seal Material, Impeller Trims, Cord Length, Leg Kit MARKINGS... CSA WEIGHT lbs (318 Kg) NOISE EMISSION MAX... In-Air 64t db-a SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel C US LR167 Series: 6XSHD 15-30HP, 1750RPM, 60Hz HP, 1150RPM, 60Hz Explosion Proof, Class I, Division 1, Groups C & D, T4 Sample Specifi cations: Section Page H. This product may be covered by one or more of the following patents and other patent(s) pending: US Patent 7,931,473 DESCRIPTION: SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. WARNING: CANCER AND REPRODUCTIVE HARM /18

2 Series 6XSHD 28 Frame Driver Specifications: Series: 6XSHD 20-60HP, 1750RPM, 60Hz 20-40HP, 1150RPM, 60Hz Explosion Proof, Class I, Division 1, Groups C & D, T4 Sample Specifi cations: Section Page H. DESCRIPTION: SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 WEAR RING... C954 Lead-Free Bronze MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Ductile Iron ASTM A-536, --12 IMPELLER: Design... Enclosed Dual Vane, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-536, --12 SHAFT Stainless Steel O RINGS... Buna-N HARDWARE Series Stainless Steel LIFTING BAIL Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware Series Stainless CORD ENTRY ft. (12.1m) Cord. Rigid quick change epoxy-potted housing POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED or 1150RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... White Iron Impeller, Seal Material, Impeller Trims, Cord Length, Leg Kit MARKINGS... CSA WEIGHT lbs (425 Kg) SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel WARNING: CANCER AND REPRODUCTIVE HARM - C US LR /18

3 Series 6XSHD 32 Frame Driver Specifications: DISCHARGE... 6", 125 lb. Horizontal Flange Slotted to accommodate 150mm ISO Flanges LIQUID TEMPERATURE F (40 C) Continuous VOLUTE... Cast Iron ASTM A-48, Class 30 WEAR RING... C954 Lead-Free Bronze MOTOR HOUSING... Cast Iron ASTM A-48, Class 30 SEAL PLATE... Cast Iron ASTM A-48, Class 30 IMPELLER: Design... Enclosed Dual Vane, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material... Ductile Iron ASTM A-536, --12 SHAFT Stainless Steel O RINGS... Buna-N HARDWARE Series Stainless Steel LIFTING BAIL Series Stainless Steel PAINT SEAL:... Axalta Corlar Epoxy, Two Coats Design... Tandem Mechanical, Oil Filled Reservoir. Material: Inboard... Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard... Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware Series Stainless CORD ENTRY ft. (12.1m) Cord. Rigid quick change epoxy-potted housing POWER CORD... CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED RPM UPPER BEARING: Design... Single Row, Ball, Oil Lubricated Load... Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load... Radial & Thrust MOTOR: Design... NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE... Requires overload protection to be included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with control circuit. OPTIONAL EQUIPMENT... White Iron Impeller, Seal Material, Impeller Trims, Cord Length, Leg Kit MARKINGS... CSA WEIGHT lbs (729 Kg) SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories... Break Away Fitting (BAF) Check Valve Control Panel Series: 6XSHD HP, 1750RPM, 60Hz Explosion Proof, Class I, Division 1, Groups C & D, T4 Sample Specifi cations: Section Page H. DESCRIPTION: SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. C US LR167 WARNING: CANCER AND REPRODUCTIVE HARM /18

4 Series 6XSHDO 21 Frame Driver inches (mm) 28 Frame Driver Optional Leg Kit - p/n 1206B IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. NOT SUITABLE FOR ENVIRONMENTS CONTAINING GASOLINE OR HEXANE. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 32 3/18

5 This page intentionally left blank 33

6 Series 6XSHDK 21 Frame Driver inches (mm) 28 Frame Driver Optional Leg Kit - p/n 1206B IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. NOT SUITABLE FOR ENVIRONMENTS CONTAINING GASOLINE OR HEXANE. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 34 3/18

7 Series 6XSHDK 32 Frame Driver inches (mm) Optional Leg Kit - p/n 1206B IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 3/18

8 Series 6XSHD MODEL NO 6XSHDO150N HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR E LOCKED ROTOR DRIVER FRAME CORD P/N CORD SIZE /4-18/ /4-18/4 6XSHDO E /4-18/4 6XSHDO G /4-18/4 6XSHDO /4-18/ J /4-18/4 6XSHDO J /4-18/4 6XSHDO G /4-18/4 6XSHDO G /4-18/4 6XSHDO G /4-18/4 6XSHDO E /4-18/4 6XSHDO F /4-18/4 6XSHDO F /4-18/4 XSHDO Pump 6XSHDO75N J /4-18/ XSHDO J /4-18/4 6XSHDO100N F /4-18/ /4-18/4 6XSHDO F /4-18/4 IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL Feet. Cord sold separately. 36 5/18

9 Series 6XSHD 1750RPM MODEL NO HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR LOCKED ROTOR DRIVER FRAME XSHDK G /4-18/ XSHDK G /4-18/4 6XSHDK G /4-18/ XSHDK E /4-18/ XSHDK F /4-18/4 6XSHDK F /4-18/4 6XSHDK E /4-18/4 6XSHDK E /4-18/4 6XSHDK E /4-18/4 6XSHDK F /4-18/4 6XSHDK F /4-18/4 6XSHDK E /4-18/4 6XSHDK E /4-18/4 6XSHDK G /4-18/4 6XSHDK G /4-18/4 6XSHDK E /4-18/4 6XSHDK E /4-18/4 6XSHDK F /0/4-18/4 6XSHDK F /4-18/4 CORD P/N CORD SIZE XSHDK Pump IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Winding Resistance 7.5% Winding resistance measured in 25 C (Between Lines) at motor leads. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL Feet Cord sold separately. 37 5/18

10 Series 6XSHD 1150RPM MODEL NO HP VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD SERVICE FACTOR SERVICE FACTOR LOCKED ROTOR DRIVER FRAME XSHDK75N J /4-18/ XSHDK J /4-18/ /4-18/4 6XSHDK100N F /4-18/4 6XSHDK F /4-18/ /4-18/4 6XSHDK150N H /4-18/4 6XSHDK H /4-18/ XSHDK H /4-18/ XSHDK E /4-18/4 6XSHDK E /4-18/4 CORD P/N CORD SIZE XSHDK Pump XSHDK G /4-18/ XSHDK G /4-18/4 6XSHDK G /4-18/ XSHDK E /4-18/ XSHDK E /4-18/4 6XSHDK E /4-18/4 6XSHDK E /4-18/4 6XSHDK E /4-18/4 6XSHDK E /4-18/4 IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Winding Resistance 7.5% Winding resistance measured in 25 C (Between Lines) at motor leads. Pump rated for operation at ± 10% voltage at motor. Cord Suffi x: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL Feet Cord sold separately. 38 5/18

11 Series 6XSHDO Performance Curve 15-30HP, 1750RPM, 60Hz mm 215 mm 25 STANDARD IMPELLER SIZES Pump HP Impeller Dia. mm (in.) 225 (8.86) 215 (8.47) 205 (8.07) 200 (7.87) mm mm Head - ft mm hp hp hp 20 hp US gpm 39 2/16

12 Series 6XSHDO Performance Curve HP, 1150RPM, 60Hz STANDARD IMPELLER SIZES mm Pump HP Impeller Dia. mm (in.) (8.86) 220 (8.66) mm mm mm Head - ft mm hp hp US gpm 40 2/16

13 Series 6XSHDK Performance Curve HP, 1750RPM, 60Hz STANDARD IMPELLER SIZES mm Pump HP Impeller Dia. mm (in.) mm 3 mm (14.57) 5 (13.98) 3 (13.19) 325 (12.80) 305 (12.01) 280 (11.02) 2 (10.04) 240 (9.) mm mm mm 75 Head - ft mm mm mm hp 100 hp hp 30 hp 40 hp 50 hp 60 hp 75 hp US gpm 41 2/16

14 Series 6XSHDK Performance Curve HP, 1150RPM, 60Hz 6XSHDK Pump 42 2/12