HOW TO SPECIFY PIRTEK HOSE TAILS

Size: px

Start display at page:

Download "HOW TO SPECIFY PIRTEK HOSE TAILS"

Bryan Spencer
5 years ago
Views:

1 HOW TO SPEIFY PIRTEK HOSE TAILS Hose Tail Part Number 629L-2016X onfiguration Angle Type - Fitting Size Hose Size Series 62 9 L X End configuration and angle are listed on the next page 1 = straight 2 = 22 bend 3= 30 bend 4 = 45 bend 6 = 60 bend 7 = 67 bend 9 = 90 bend L = long drop = compact or = aterpillar Defined by type of end connection i.e. thread, flange, tube, banjo etc. See the identification table - 03 = 3/16 ID - 04 = 1/4 ID - 05 = 5/16 ID - 06 = 3/8 ID - 08 = 1/2 ID -10 = 5/8 ID -12 = 3/4 ID -16 = 1 ID etc. Tail Series / Dash Size stamped on 1-piece crimp fittings A Series J Series K Series P Series S7 Series S8 Series X Series etc. (Tabulated below) IDENTIFIATION PRODUT ODES 62 refers to an SAE 62 flange fitting 9=90 bend L = long drop Flange OD (Dim. B) = mm for size flange Hose ID is 1 for dash 16 hose X Series suits 1 ID lass 42 hose Possible combinations of these 3 items are as listed on the next page. Note that for some situations, the position of the L can vary from the example given above. Hose ID for 100R5 and its variants differ from 1/16 convention. Refer to the specific hose table for details. Refer to page 5 or a current crimp chart for the correct selection K, J, 2J, R, X, XL, & T Series Fittings are stamped on the Ferrule of the Hose Tail as illustrated above Tail Series K / J / 2J B (+ SFB) X / XL T I Application Braided & multi-spiral hoses for general use. (B Series 2 piece) More demanding multi-spiral applications STH, MPH and thermoplastic hoses Interlock attachment for extreme multi-spiral applications Tail Series A / R 932 / 934 / 954 Large bore hoses G Gas hoses P F L Application SAE 100R5 dimensioned hoses A = field attachable, R = crimp Push-on fitting for low pressure textile braided hoses Field attachable for SAE 1-wire and 2-wire dimensioned hoses Low pressure tail for suction and return hoses (clamp required) Tail Series S7 S8 S18 SV Application Synflex tail for SAE 100R7 dimensioned thermoplastic hose Synflex tail for SAE 100R8 dimensioned thermoplastic hose Synflex tail new generation SAE 100R18 thermoplastic hose Suits high performance Synflex hoses (restrictions apply) See a pictorial representation of the various Tail Series overleaf Rev 4 1

IDENTIFIATION PRODUT ODES QUIK GUIDE TO PIRTEK PRODUT ODES All codes require size information and the appropriate hose tail Series (Suffix) to allow a complete to be assembled.

2 IDENTIFIATION PRODUT ODES QUIK GUIDE TO PIRTEK PRODUT ODES All codes require size information and the appropriate hose tail Series (Suffix) to allow a complete to be assembled. See page 1 for a guide to ordering Straight Elbow Fitting Type of Fitting Unthreaded Male Female Long Banjo BSP BB1 Banjo Metric BM1 BSP Flat Face BFF1 BSPP BPM1 BF1 BF4 BF9 BFL9 BSPP ompact BF9 BSPT BTM1 JI JM1 JF1 JF4 JF9 JFL9 JI ompact JF4 JF9 JI Imperial Hex. JFIH1 JFIH4 JFIH9 JI Imp. Hex ompact JFIH9 JIS / BSP (Mitsubishi) JBF1 JIS / Metric (Komatsu) JMF1 Kärcher KT1 Metric GAZ (French) Metric heavy (DKS / DKO) DSM1 DSF1 DSF4 DSF9 Metric Multi Seal (DKL) DMSF1 Metric light (DKL) DLM1 DLF1 DLF4 DLF9 Metric Face Seal (hinese) MOF1 NPT NM1 NF1 ORFS OM1 OF1 OF4 OF9 OFL9 SAE SM1 SF1 SF4 SF9 SAE ompact SF9 SAE Inverted Flare swivel SAE Flange psi L SAE Flange psi L Supercat Flange 9000 psi JIS Flange (Komatsu) As for SAE Flange 61 except with K prefix. Example: K611 Joiner (2-ended hose tail) HJ Standpipe Imperial SPI1 SPI4 SPI9 Standpipe Metric SPM1 SPM4 SPM9 SKV SSKV Staple Lock SLM1 SLM4 SLM9 Staple Lock Super SSLM1 UNO (SAE O-Ring Boss) UNM1 UNM9 UNO Swivel UMS1 Weld on Tail (Lifesaver) WO1 HOSE TAIL SERIES PHYSIAL APPEARANE K/J/2J/R T X/XL F A P L 932/934/954 2 I G/S7/S8 SV B / INDUST Note that the Industrial tails (INDUST above) are not documented in this atalogue. Please consult Mining or Industrial Fittings Sections for details. B Series Tails resemble Industrial Tails and require a separate SFB Ferrule Rev 4.1

3 QUIK GUIDE TO HOSE TAIL SERIES The hose tail Series documented here represent the Suffix of the (Page 1) Please consult current published rimp harts for the most recent Technical Data Hose Dimension dia Hose size 3/16 1/4 5/16 3/8 1/2 5/8 3/ /4 1.1/ /2 3 DN HTAB R R R R R R HTFH R R R IROFSD 932 J/932 J/ MPH P P P/T P/T P/T P P IRFAW * IND./FFI IND./FFI IND./FFI IFRAS * IND./FFI IRRF T* T* T* T* T* 100R6 P P P P P P P P 100R5HT A/R A/R/K* A/R/K* A/R/K* A/R/J* A/R/K* A/R A/R A/R A/R JW210 (A) K K JW250 (A) K K JW400 (A) K R1AT K K K J,2J J J/2J J/2J J/2J 954 R2AT K K K K J,2J J J/2J J/2J J/2J 954 2S J/ R2ATHT K K K K J,2J J J/2J J/2J J/2J 21 J/2J/X 25 K J,2J J J/2J/X J/2J/X 35 K K/J K/J K J/2J/H/I J/X/I X/I X/I X/I 42 K K/J K/J X/H/I X/I X/I X/I XL 45 B/SFB LPG G (-06) JBF40 BSMS XT3 K K K J/2J/X J/X J/2J/X J/2J/X J/2J/X XT5 X X X/I X/I X/I WB1000 I/IFWB WB1100 I/IFWB 3130 S7/T S7/T S7/T S7/T S7/T S7/T S7/T 3800 S7 S7 S7 S7 30T, 3360 S7/T S7/T S7/T S7/S8/T S18 37AL S7/T S7/T S7/T 3840 S7 S7 S7 S7 3E80 S8 S8 S8 3R80 S8 S8 S8 S8 S8 S8 3VEO SV SV Assembly only by accredited personnel STH T T T T T T T T * Denotes that the 1/16 Dash Size convention is not applicable for these s IDENTIFIATION PRODUT ODES Rev 4 3

4 IDENTIFIATION PRODUT ODES THREAD BSP HOSE TAILS PAGE NUMBER AESS MATRIX FOR HOSE TAILS 1 / 2 SERIES K/J/2J X/XL T I A B R P F L G S7 S8 S18 SV BSP Female Straight BSP Flat Face Female Straight BSP Female JIS (Mitsubishi) BSP Female BSP Female BSP Female 90 ompact BSP Taper Male BSP Parallel Male BSP Male BSP Banjos Straight NPT HOSE TAILS NPSM Female Straight NPT Male Straight / Male Swivel / JI HOSE TAILS JI Female Straight Imp. Hex JI Female 45 Elbow Imp. Hex JI Female 90 Elbow Imp. Hex JI Fem. 90 ompact Imp. Hex JI Female Straight JI Female 45 Elbow JI Female 90 Elbow JI Female 45 ompact JI Female 90 ompact JI Fem. 90 Elbow Long Drop JI Male SAE / UN O HOSE TAILS SAE Female Straight SAE Female 45 Elbow SAE Female 90 Elbow SAE Fem. 90 ompact Elbow SAE / UN O Male Straight UN O Male O-RING FAE SEAL (ORFS) ORFS Female Straight ORFS Female 45 Elbow ORFS Female 90 Elbow ORFS Fem. 90 Elbow L. Drop ORFS Male Straight Metric Face Seal Straight (hinese) METRI HOSE TAILS DKL (Light) Female Straight + Multiseal DKL (Light) Female 45 Elbow DKL (Light) Female 90 Elbow DKL (Light) Male Straight DKS (Heavy) Female Straight DKS (Heavy) Female 45 Elbow DKS (Heavy) Female 90 Elbow DKS (Heavy) Male Straight Metric Standpipe Straight Metric Standpipe 45 Elbow Metric Standpipe 90 Elbow Metric Banjo Straight Metric Face Seal Straight (hinese) JIS Female Straight (Komatsu) Rev 4

5 PAGE NUMBER AESS MATRIX FOR HOSE TAILS 2 / 2 THREAD SERIES 932 / 934 K/J/2J X/XL T I 954 A B R P F L G S7 S8 S18 SAE FLANGE HOSE TAILS Flange O-Rings and lamps Dimensions Pages 28 / psi Straight Elbow Elbow Elbow Elbow Elbow Elbow &135 Elbows psi Straight and 20 Elbow Elbow L. Drop & Ext. LD Elbows Elbow Elbow Long Drop Elbow SUPERAT 6000 psi & EHTF Straight & / & 45 Elbows / & 67 Elbows / Elbow KOMATSU HOSE TAILS JIS Female Straight (Komatsu) Low Pressure Flanges (2 Bolt) Straight Elbow Elbow Standard Pressure Flanges Straight Long Neck Straight Elbow Elbow Elbow Elbow Long Drop Elbow SPEIALTY HOSE TAILS JAPANESE JIS Metric Fem. Str. (Komatsu) JIS BSP Fem. Str. (Mitsubishi) STANDPIPES Metric Straight Metric 45 Elbow Metric 90 Elbow PRESSURE WASHERS Kärcher Tails and Accessories High Press. DKS Metric Fem. Str EMERGENY Weld-on Lifesavers Hose Joiner (Double ended Tail) BANJOS BSP Straight Metric Straight FERRULES Non Skive Field Attachable 112 Interlock 81 STAPLELOK & SKV / SSKV Staplelok and Mining SKV / SSKV IDENTIFIATION PRODUT ODES Rev 4.1 5

6 K, J, 2J SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BF1 BSPP FEMALE STRAIGHT BF4 BSPP FEMALE 45 ELBOW BSPP Thread Nominal ID Dimensions mm T Size DN Inch Dash A B H BF1-0204K 1/ / BF1-0404K * 1/ / BF1-0604K 3/ / BF1-0605K 3/ / BF1-0805K 1/ / BF1-0406K 1/ / BF1-0606K * 3/ / BF1-0806K 1/ / BF1-0608K 3/ / BF1-0808K * 1/ / BF1-1008K 5/ / BF1-1208K 3/ / BF1-1010K 5/ / BF1-1210K 3/ / BF1-1212J 3/ / BF1HD-1212J 3/ / BF1-1612J * / BF1-1616J * BF1HD-1616J * BF1-2016J * 1.1/ BF1-2020J * 1.1/ / BF1HD-2020J * 1.1/ / BF1-2424J * 1.1/ / BF1-3232J * * Free Nut version. Available only to special order ª Thrust wired nut version Heavy duty hammer coupling. O-Ring incorporated in seal, and thicker tail. Uses high strength carbon steel. O-Ring replacement s BO-12, BO-16, BO-20 BSPP Thread Nominal ID Dimensions mm T Size DN Inch Dash A B H D BF4-0404K * 1/ / BF4-0606K * 3/ / BF4-0808K * 1/ / BF4-1010K 5/ / BF4-1212J 3/ / BF4-1616J ª BF4-2020J ª 1.1/ / BF4-2424J ª 1.1/ / BF4-3232J ª Rev 4

7 BSP ORIGIN: GREAT BRITAIN BF9 BSPP FEMALE 90 ELBOW BSPP Thread Nominal ID Dimensions mm T Size DN Inch Dash A B H D BF9-0404K * 1/ / BF9-0604K * 3/ / BF9-0606K * 3/ / BF9-0806K * 1/ / BF9-0808K * 1/ / BF9-1010K 5/ / BF9-1212J 3/ / BF9-1612J / BF9-1616J ª BF9-2020J ª 1.1/ / BF9-2424J ª 1.1/ / BF9-3232J ª * Free Nut version. ª Thrust wired nut version K, J, 2J SERIES BSP FITTINGS BF9 BSPP FEMALE 90 OMPAT ELBOW BSPP Thread Nominal ID Dimensions mm T Size DN Inch Dash A B D H BF9-0404K 1/ / BF9-0606K 3/ / BF9-0808K 1/ / BF9-1212J 3/ / BF9-1616J Rev 4 7

K, J, 2J SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BFF1 BSPP FLAT FAE FEMALE STRAIGHT BPM1 BSPP MALE STRAIGHT BSPP Thread Nominal ID Dimensions mm T Size DN Inch Dash A B H BFF1-0606K 3/8-19 06

8 K, J, 2J SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BFF1 BSPP FLAT FAE FEMALE STRAIGHT BPM1 BSPP MALE STRAIGHT BSPP Thread Nominal ID Dimensions mm T Size DN Inch Dash A B H BFF1-0606K 3/ / BFF1-0806K 1/ / BFF1-0808K 1/ / BFF1-1212J 3/ / BFF1-1616J BSPP Thread Nominal ID Dimensions mm T Size DN Inch Dash A B ES BPM1-0404K 1/ / BPM1-0606K 3/ / BPM1-0806K 1/ / BPM1-0808K 1/ / BPM1-1212J 3/ / BPM1-1612J / BPM1-1616J Rev 4

9 BSP ORIGIN: GREAT BRITAIN BTM1 BSPT MALE STRAIGHT BSPP Thread Nominal ID Dimensions mm T Size DN Inch Dash A B ES BTM1-0204K 1/ / BTM1-0404K 1/ / BTM1-0604K 3/ / BTM1-0406K 1/ / BTM1-0606K 3/ / BTM1-0806K 1/ / BTM1-0608K 3/ / BTM1-0808K 1/ / BTM1-1208K 3/ / BTM1-1010K 5/ / BTM1-1210K 3/ / BTM1-1212J 3/ / BTM1-1612J / BTM1-1616J BTM1-2020J 1.1/ / BTM1-2424J 1.1/ / BTM1-3232J K, J, 2J SERIES BSP FITTINGS Rev 4 9

10 K, J, 2J SERIES BSP FITTINGS BSP BANJOS ORIGIN: GREAT BRITAIN BB1 BSPP BANJO STRAIGHT BBB BSPP BANJO BOLT BSPP Thread Nominal ID Dimensions mm T Size DN Inch Dash A B BB1-0404K 1/ / BB1-0606K 3/ / BB1-0808K 1/ / BB1-1010K 5/ / BB1-1212J 3/ / BB1-1616J Bolt Thread Dimension (mm) E Size A B S1 E BBB-02 1/ BBB-04 1/ BBB-06 3/ BBB-08 1/ BBB-10 5/ BBB-12 3/ BBB Rev 4

11 NPT ORIGIN: NORTH AMERIA NF1 NPSM FEMALE STRAIGHT NM1 NPT MALE STRAIGHT NPSM Thread Nominal ID Dimensions mm T Size DN Inch Dash A B H ES NF1-0404K 1/ / NF1-0606K 3/ / K, J, 2J SERIES NPT FITTINGS NPT Thread Nominal ID Dimensions mm T Size DN Inch Dash A B ES NM1-0204K 1/ / NM1-0404K 1/ / NM1-0604K 3/ / NM1-0406K 1/ / NM1-0606K 3/ / NM1-0806K 1/ / NM1-0608K 3/ / NM1-0808K 1/ / NM1-1212J 3/ / NM1-1616J 1-11½ NM1-2020J 1.1/4-11½ / NM1-2424J 1.1/2-11½ / NM1-3232J 2-11½ NM1E NPT EXTENDED MALE STRAIGHT Refer to picture above NPT Thread Nominal ID Dimensions mm T Size DN Inch Dash A B ES NM1E-0404K 1/ / NM1E-0604K 3/ / NM1E-0606K 3/ / Rev 4 11

12 K, J, 2J SERIES JI FITTINGS JI FITTINGS ORIGIN: NORTH AMERIA JFIH1 JI FEMALE STRAIGHT IMPERIAL HEX JFIH4 JI FEMALE 45 ELBOW IMPERIAL HEX JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES JFIH1-0704K 7/ / JFIH1-0904K 9/ / JFIH1-0906K 9/ / JFIH1-1206K 3/ / JFIH1-1208K 3/ / JFIH1-1408K 7/ / JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H JFIH4-0704K 7/ / JFIH4-0904K 9/ / JFIH4-0906K 9/ / JFIH4-1206K 3/ / JFIH4-1208K 3/ / JFIH9 JI FEMALE 90 ELBOW IMPERIAL HEX JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H D JFIH9-0704K 7/ / JFIH9-0904K 9/ / JFIH9-0906K 9/ / JFIH9-1206K 3/ / JFIH9-1208K 3/ / Rev 4

13 JI FITTINGS ORIGIN: NORTH AMERIA JFIH9 JI FEMALE 90 OMPAT ELBOW IMPERIAL HEX JFI JI FEMALE STRAIGHT JI Thread Hose Bore Dimensions m(m) T (Thread) Size T (Tube) DN Inch Size A B H D JFIH9-0704K 7/ / JFIH9-0904K 9/ / JFIH9-0906K 9/ / JFIH9-1206K 3/ / JFIH9-1208K 3/ / K, J, 2J SERIES JI FITTINGS JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES JF1-0704K 7/ / JF1-0804K 1/ / JF1-0904K 9/ / JF1-0905K 9/ / * JF1-0906K 9/ / JF1-1206K 3/ / JF1-1406K 7/ / JF1-1208K 3/ / JF1-1408K 7/ / JF1-1708K 1.1/ / JF1-1410K 7/ / JF1-1710K 1.1/ / JF1-1412J 7/ / JF1-1712J 1.1/ / JF1-1912J 1.3/ / JF1-2112J 1.5/ / JF1-2116J 1.5/ JF1-2616J 1.5/ JF1-2620J 1.5/ / JF1-3024J 1.7/ / JF1-4032J 2.1/ JF1-4840J / * Raw material round Thrust wired nut Double thrust wired nut Rev 4 13

14 K, J, 2J SERIES JI FITTINGS JI FITTINGS ORIGIN: NORTH AMERIA JF4 JI FEMALE 45 ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H D JF4-0704K 7/ / JF4-0804K 1/ / JF4-0904K 9/ / JF4-0906K 9/ / JF4-1206K 3/ / JF4-1208K 3/ / JF4-1408K 7/ / JF4-1410K 7/ / JF4-1710K 1.1/ / t JF4-1712J 1.1/ / JF4-2112J 1.5/ / JF4-2116J 1.5/ JF4-2620J 1.5/ / JF4-3024J 1.7/ / JF4-4032J 2.1/ Thrust wired nut JF9 JI FEMALE 90 ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H JF9-0704K 7/ / JF9-0804K 1/ / JF9-0904K * 9/ / JF9-0906K 9/ / JF9-1206K 3/ / JF9-1208K 3/ / JF9-1408K 7/ / JF9-1708K 1.1/ / JF9-1410K 7/ / JF9-1710K 1.1/ / JF9-1712J 1.1/ / JF9-2112J 1.5/ / JF9-2116J 1.5/ JF9-2616J 1.5/ JF9-2620J 1.5/ / JF9-3024J 1.7/ / JF9-4032J 2.1/ Thrust wired nut * Also in Stainless Steel JF9SS-0904K 14 Rev 4

JI FITTINGS ORIGIN: NORTH AMERIA JF4 JI FEMALE 45 OMPAT ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H JF4-0704K 7/16-20 07 04 6 1/4 04 17.5 8.

5 24 JF4-1408K 7/8-14 14 10 12 1/2 08 25.5 13 27 JF4-1410K 7/8-14 14 10 16 5/8 10 25.5 13 27 JF4-1712J 1.1/16-12 17 12 20 3/4 12 52 13.5 32 JF4-2116J 1.

15 JI FITTINGS ORIGIN: NORTH AMERIA JF4 JI FEMALE 45 OMPAT ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H JF4-0704K 7/ / JF4-0904K 9/ / JF4-0906K 9/ / JF4-1206K 3/ / JF4-1208K 3/ / JF4-1408K 7/ / JF4-1410K 7/ / JF4-1712J 1.1/ / JF4-2116J 1.5/ K, J, 2J SERIES JI FITTINGS JF9 JI FEMALE 90 OMPAT ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H JF9-0704K 7/ / JF9-0904K 9/ / JF9-0906K 9/ / JF9-1206K 3/ / JF9-1208K 3/ / JF9-1408K 7/ / JF9-1410K 7/ / JF9-1710K 1.1/ / JF9-1712J 1.1/ / JF9-2116J 1.5/ Rev 4 15

16 K, J, 2J SERIES JI FITTINGS JI FITTINGS ORIGIN: NORTH AMERIA JFL9 JI FEMALE LONG DROP 90 ELBOW JM1 JI MALE STRAIGHT JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H JFL9-0704K 7/ / JFL9-0904K 9/ / JFL9-0906K 9/ / JFL9-1206K 3/ / JFL9-1208K 3/ / JFL9-1408K 7/ / JFL9-1410K 7/ / JFL9-1710K 1.1/ / JFL9-1712J 1.1/ / JFL9-2116J 1.5/ JFL9-2620J 1.5/ / Thrust wired nut JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B ES JM1-0704K 7/ / JM1-0804K 1/ / JM1-0904K 9/ / JM1-0905K 9/ / JM1-0906K 9/ / JM1-1206K 3/ / JM1-1208K 3/ / JM1-1408K 7/ / JM1-1708K 1.1/ / JM1-1410K 7/ / JM1-1710K 1.1/ / JM1-1412J 7/ / JM1-1712J 1.1/ / JM1-1912J 1.3/ / JM1-2112J 1.5/ / JM1-2116J 1.5/ JM1-2616J 1.5/ JM1-2620J 1.5/ / JM1-3024J 1.7/ / JM1-4032J Rev 4

17 SAE FITTINGS ORIGIN: NORTH AMERIA UNMS9 UNO MALE 90 SWIVEL ELBOW D B H T A UNO Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H D UNMS9-1206K 3/ / UNMS9-1208K 3/ / UNMS9-1408K 7/ / K, J, 2J SERIES SAE FITTINGS Rev

K, J, 2J SERIES SAE FITTINGS SAE FITTINGS ORIGIN: NORTH AMERIA SF1 SAE FEMALE STRAIGHT SF9 SAE FEMALE 90 ELBOW SAE Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES SF1-1004K

18 K, J, 2J SERIES SAE FITTINGS SAE FITTINGS ORIGIN: NORTH AMERIA SF1 SAE FEMALE STRAIGHT SF9 SAE FEMALE 90 ELBOW SAE Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES SF1-1004K 5/ / SF1-1006K 5/ / SF1-1712J 1.1/ / SAE Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H SF9-1006K 5/ / SM1 SAE MALE STRAIGHT SAE Thread Hose Bore Dimensions (mm) T (Thread) Size Tube DN Inch Size A B ES SM1-1006K 5/ / Rev 4

19 ORFS FITTINGS ORIGIN: NORTH AMERIA OF1* O-RING FAE SEAL FEMALE STRAIGHT UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES OF1-0404K 9/ / OF1-0604K 11/ / OF1-0606K 11/ / OF1-0806K 13/ / OF1-0808K 13/ / OF1-1008K / OF1-1010K / OF1-1208K 1.3/ / OF1-1210K 1.3/ / OF1-1212J 1.3/ / OF1-1612J 1.7/ / OF1-1616J 1.7/ OF1-2016J 1.11/ OF1-2020J 1.11/ / OF1-2420J / OF1-2424J / * For data pertaining to these fittings when equipped with metric threads, as commonly encountered on equipment of hinese origin, please refer to MOF1 on page 27 of this catalogue K, J, 2J SERIES ORFS FITTINGS OM1 O-RING FAE SEAL MALE STRAIGHT UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B ES OM1-0404K 9/ / OM1-0606K 11/ / OM1-0808K 13/ / OM1-1008K / OM1-1212J 1.3/ / OM1-1616J 1.7/ Available only to special order Rev 4 19

20 K, J, 2J SERIES ORFS FITTINGS ORFS FITTINGS ORIGIN: NORTH AMERIA OF4 O-RING FAE SEAL FEMALE 45 ELBOW OF9 O-RING FAE SEAL FEMALE 90 ELBOW UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H OF4-0404K 9/ / OF4-0604K 11/ / OF4-0606K 11/ / OF4-0806K 13/ / OF4-0808K 13/ / OF4-1010K / OF4-1212J 1.3/ / OF4-1616J 1.7/ OF4-2020J 1.11/ / OF4-2424J / UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H OF9-0404K 9/ / OF9-0604K 11/ / OF9-0606K 11/ / OF9-0806K 13/ / OF9-0808K 13/ / OF9-1008K / OF9-1010K / OF9-1208K 1.3/ / OF9-1210K 1.3/ / OF9-1212J 1.3/ / OF9-1612J 1.7/ / OF9-1616J 1.7/ OF9-2016J 1.11/ OF9-2020J 1.11/ / OF9-2424J / Rev 4

21 ORFS FITTINGS ORIGIN: NORTH AMERIA OFL9 O-RING FAE SEAL FEMALE 90 LONG DROP ELBOW UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H OFL9-0404K 9/ / OFL9-0606K 11/ / OFL9-0808K 13/ / OFL9-1008K / OFL9-1010K / OFL9-1212J 1.3/ / OFL9-1612J 1.7/ / OFL9-1616J 1.7/ K, J, 2J SERIES ORFS FITTINGS Rev 4 21

22 K, J, 2J SERIES METRI FITTINGS METRI FITTINGS ORIGIN: GERMANY DLF1 DKL (LIGHT) METRI FEMALE STRAIGHT DMSF1 DKL (LIGHT) METRI MULTISEAL FEMALE STRAIGHT INFORMATION: DKL = Dicht Kegel Leicht meaning Sealing one Light (one included angle is 24 ) Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H DLF1-1204K M12 x L 6 1/ DLF1-1404K M14 x L 6 1/ DLF1-1604K M16 x L 6 1/ DLF1-1605K M16 x L 08 5/ DLF1-1606K M16 x L 10 3/ DLF1-1804K M18 x L 6 1/ DLF1-1806K M18 x L 10 3/ DLF1-2206K M22 x L 10 3/ DLF1-2208K M22 x L 12 1/ DLF1-2610K M26 x L 16 5/ DLF1-3012J M30 x L 20 3/ DLF1-3616J M36 x L DLF1-4520J M45 x L / DLF1-5224J M52 x L / Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H DMSF1-1404K M14 x L 6 1/ DMSF1-1604K M16 x L 6 1/ DMSF1-1606K M16 x L 10 3/ DMSF1-1806K M18 x L 10 3/ DMSF1-2208K M22 x L 12 1/ These fittings are commonly found on Eurpoean pressure cleaners and on forklifts / small mobile equipment of hinese origin DLM1 DKL (LIGHT) METRI MALE STRAIGHT 22 Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B ES DLM1-1204K M12 x L 6 1/ DLM1-1404K M14 x L 6 1/ DLM1-1604K M16 x L 06 1/ DLM1-1605K M16 x L 08 5/ DLM1-1606K M16 x L 10 3/ DLM1-1806K M18 x L 10 3/ DLM1-2208K M22 x L 12 1/ DLM1-2610K M26 x L 16 5/ DLM1-3012J M30 x L 20 3/ DLM1-3616J M36 x L Rev 4.1

23 METRI FITTINGS ORIGIN: GERMANY DLF4 DKL (LIGHT) METRI FEMALE 45 ELBOW DLF9 DKL (LIGHT) METRI FEMALE 90 ELBOW INFORMATION: DKL = Dicht Kegel Leicht meaning Sealing one Light (one included angle is 24 ) Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H DLF4-1204K M12 x L 6 1/ DLF4-1404K M14 x L 6 1/ DLF4-1605K M16 x L 8 5/ DLF4-1606K M16 x L 10 3/ DLF4-1806K M18 x L 10 3/ DLF4-2208K M22 x L 12 1/ DLF4-2610K M26 x L 16 5/ DLF4-3012J M30 x L 20 3/ DLF4-3616J M36 x L Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H DLF9-1204K M12 x L 06 1/ DLF9-1404K M14 x L 06 1/ DLF9-1605K M16 x L 08 5/ DLF9-1606K M16 x L 10 3/ DLF9-1804K M18 x L 06 1/ DLF9-1806K M18 x L 10 3/ DLF9-2208K M22 x L 12 1/ DLF9-2610K M26 x L 16 5/ DLF9-3012J M30 x L 19 3/ DLF9-3616J M36 x L DLF9-4520J M45 x L / DLF9-5224J M52 x L / K, J, 2J SERIES METRI FITTINGS O-RING DATA O-Ring Details for Light Series Hose tails Hose Tail Series Metric Thread Size Tube O.D. (mm) O-Ring (mm) I.D. x Thickness DKOR 06-L/S M12x x1.5 DKOR 08-L/S M14x x1.5 DKOR 10-L/S M16x x1.5 DKOR 12-L/S M18x x1.5 DLF1 DKOR 15-L M22x x2 DLF4 DKOR 18-L M26x x2 DLF9 DKOR 22-L M30x x2 DKOR 28-L M36x x2 DKOR 35-L M45x x2.5 DKOR 42-L M52x x2.5 Rev 4 23

24 K, J, 2J SERIES METRI FITTINGS METRI FITTINGS ORIGIN: GERMANY DSF1 DKS (HEAVY) METRI FEMALE STRAIGHT DSM1 DKS (HEAVY) METRI MALE STRAIGHT INFORMATION: DKS = Dicht Kegel Schwer meaning Sealing one Heavy (one included angle is 24 ) Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H DSF1-1404K M14 x S 6 1/ DSF1-1604K M16 x S 6 1/ DSF1-1804K M18 x S 6 1/ DSF1-2005K M20 x S 8 5/ DSF1-2006K M20 x S 10 3/ DSF1-2206K M22 x S 10 3/ DSF1-2408K M24 x S 12 1/ DSF1-3010K M30 x S 16 5/ DSF1-3012K M30 x S 20 3/ DSF1-3612J M36 x S 20 3/ DSF1-3616J M36 x S DSF1-4216J M42 x S DSF1-5220J M52 x S / Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B ES DSM1-1604K M16 x S 6 1/ DSM1-1804K M18 x S 6 1/ DSM1-2006K M20 x S 10 3/ DSM1-2206K M22 x S 10 3/ DSM1-2408K M24 x S 12 1/ DSM1-3010K M30 x S 16 5/ DSM1-3612J M36 x S 20 3/ DSM1-4216J M42 x S DSM1-5220J M52 x S / Rev 4

METRI FITTINGS ORIGIN: GERMANY DSF4 DKS (HEAVY) METRI FEMALE 45 ELBOW DSF9 DKS (HEAVY) METRI FEMALE 90 ELBOW O-RING DATA INFORMATION: DKS = Dicht Kegel Schwer meaning Sealing one Heavy (one included

5 18 10 S 6 1/4 04 42.5 2 17 22 DSF4-2006K M20 x 1.5 20 12 S 10 3/8 06 46 2 21.5 24 DSF4-2206K M22 x 1.5 22 14 S 10 3/8 06 49.5 4 23.4 27 DSF4-2408K M24 x 1.

5 46 DSF4-4216J M42 x 2 42 30 S 25 1 16 91.5 6 35 50 Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H DSF9-1404K M14 x 1.5 14 6 S 6 1/4 04 27.5 2.5 37.

25 METRI FITTINGS ORIGIN: GERMANY DSF4 DKS (HEAVY) METRI FEMALE 45 ELBOW DSF9 DKS (HEAVY) METRI FEMALE 90 ELBOW O-RING DATA INFORMATION: DKS = Dicht Kegel Schwer meaning Sealing one Heavy (one included angle is 24 ) Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H DSF4-1404K M14 x S 6 1/ DSF4-1604K M16 x S 6 1/ DSF4-1804K M18 x S 6 1/ DSF4-2006K M20 x S 10 3/ DSF4-2206K M22 x S 10 3/ DSF4-2408K M24 x S 12 1/ DSF4-3010K M30 x S 16 5/ DSF4-3012K M30 x S 20 3/ DSF4-3612J M36 x S 20 3/ DSF4-4216J M42 x S Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H DSF9-1404K M14 x S 6 1/ DSF9-1604K M16 x S 6 1/ DSF9-1804K M18 x S 6 1/ DSF9-2006K M20 x S 10 3/ DSF9-2206K M22 x S 10 3/ DSF9-2408K M24 x S 12 1/ DSF9-3010K M30 x S 16 5/ DSF9-3012K M30 x S 20 3/ DSF9-3612J M36 x S 20 3/ DSF9-4216J M42 x S DSF9-5220J M52 x S / K, J, 2J SERIES METRI FITTINGS O-Ring Details for Heavy Series Hose tails Hose Tail Series Metric Thread Size Tube O.D. (mm) O-Ring (mm) I.D. x Thickness DKOR 06-L/S M14x x1.5 DKOR 08-L/S M16x x1.5 DKOR 10-L/S M18x x1.5 DKOR 12-L/S M20x x1.5 DSF1 DKOR 14-S M22x x2 DSF4 DKOR 16-S M24x x2 DSF9 DKOR 20-S M30x x2.4 DKOR 25-S M36x x2.4 DKOR 30-S M42x x2.4 DKOR 38-S M52x x2.4 Rev

K, J, 2J SERIES METRI STANDPIPES METRI FITTINGS ORIGIN: GERMANY SPM1 METRI STANDPIPE STRAIGHT SPM4 METRI STANDPIPE 45 ELBOW Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size T A B

5 24 SPM1-1006K 10 10 10 L/S 10 3/8 06 10 30.5 24 SPM1-1206K 12 12 12 L/S 10 3/8 06 12 30.

12 22 36.5 29 SPM1-2512J 25 25 25 S 20 3/4" 12 25 48.5 41 SPM1-2816J 28 28 28 L 25 1" 16 28 39.5 30 SPM1-3016J 30 30 30 S 25 1" 16 30 53.

26 K, J, 2J SERIES METRI STANDPIPES METRI FITTINGS ORIGIN: GERMANY SPM1 METRI STANDPIPE STRAIGHT SPM4 METRI STANDPIPE 45 ELBOW Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size T A B SPM1-0604K L/S 06 1/ SPM1-0804K L/S 06 1/ SPM1-1004K L/S 06 1/ SPM1-1005K L/S 08 5/ SPM1-1006K L/S 10 3/ SPM1-1206K L/S 10 3/ SPM1-1508K L 12 1/ SPM1-1608K S 12 1/ SPM1-1810K L 16 5/ SPM1-2010K S 16 5/ SPM1-2212J L 20 3/4" SPM1-2512J S 20 3/4" SPM1-2816J L 25 1" SPM1-3016J S 25 1" Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size T A D SPM4-0604K L/S 6 1/ SPM4-0804K L/S 6 1/ SPM4-1004K L/S 6 1/ SPM4-1006K L/S 10 3/ SPM4-1206K L/S 10 3/ SPM4-1508K L 12 1/ SPM4-1608K S 12 1/ SPM4-1810K L 16 5/ SPM4-2010K S 16 5/ SPM9 METRI STANDPIPE 90 ELBOW 26 Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size T A D SPM9-0604K L/S 6 1/ SPM9-0804K L/S 6 1/ SPM9-1004K L/S 6 1/ SPM9-1005K L/S SPM9-1006K L/S 10 3/ SPM9-1206K L/S 10 3/ SPM9-1508K L 12 1/ SPM9-1608K S 12 1/ SPM9-1810K L 16 5/ SPM9-2010K S 16 5/ Rev 4

27 METRI FITTINGS ORIGIN: GERMANY BM1 METRI BANJO STRAIGHT BMB METRI BANJO BOLT MOF1 METRI O-RING FAE SEAL FEMALE STRAIGHT SUITS HINESE EQUIPMENT Metric Thread Nominal ID Dimensions mm T Size Dash Inch DN A B BM1-1204K M12 x / BM1-1405K M14 x / BM1-1406K M14 x / BM1-1606K M16 x / BM1-1806K M18 x / BM1-1808K M18 x / BM1-2210K M22 x / BM1-2612J M 26 x / BM1-3016J M30 x Bolt Thread To Suit Hose Bore Dimension (mm) E Size DN Inch Size A B S1 E BMB-10 M10 x /16 03 BMB-12 M12 x / BMB-14 M14 x / BMB-16 M16 x / BMB-18 M18 x , 12 3/8, 1/2 06, BMB-22 M22 x / BMB-26 M26 x / K, J, 2J SERIES METRI BANJOS & O-RING FAE SEAL Metric Thread Hose Bore Dimensions (mm) Thread Size DN Inch Size A B H ES MOF1-1604K M16 x /4 04 na na na na MOF1-1804K M18 x / na MOF1-2206K M22 x / na MOF1-2408K M24 x / na Pirtek do not offer male hose tails or adaptors to suit these fittings. The male fittings, when encountered in the field, differ in the manner of O-Ring retention from conventional American ORFS fittings. They feature a recessed circular flat area to retain the O-Ring rather than the more common groove as used in American fittings. Rev 4 27

28 K, J, 2J SERIES SAE FLANGE DATA SAE FLANGES ORIGIN: NORTH AMERIA L ØE ØG ØT ØSM 45º LP Z L TOT P ØS Nominal Groove and Flange Dimensions for the Pirtek Range of SAE 61, 62 and Supercat Flanges Note that manufacturing tolerances may apply. Refer SAE J518 for comprehensive details. Further technical details of O-Rings and Flange lamps can be found in Section D (Adaptors) of this atalogue Note that the dimensions of Supercat Flanges are identical to those of 62 Flanges in all respects except Dimension Z. The Supercat Flanges all have 14.2 mm as the Z Dimension Associated bolt dimensions are tabulated opposite O-Ring lamp ODE 61 DIMENSIONS SIZE ØE ØG ØS Z LP L P LTOT 08 Y-08 AZ Y-12 AZ Y-16 AZ Y-20 AZ Y-24 AZ Y-32 AZ Y-40 AZ Y-48 AZ Sufficient to allow bolt installation O-Ring * lamp ODE 62 DIMENSIONS SIZE ØE ØG ØS Z LP L P LTOT 08 Y-08 AZ Y-12 AZ Y-16 AZ Y-20 AZ Y-24 AZ Y-32 AZ Sufficient to allow bolt installation * OKS Series O-Rings provide superior performance to the Y Series O-Rings for more demanding applications often associated with 62 Flanges See atalogue Section D page D 84 SIZE O-Ring lamp STANDARD PRESSURE KOMATSU FLANGES DIMENSIONS ØE ØG ØS Z LP L P LTOT 10 Y KY-12 AZ KY-16 AZ KY-20 AZ KY-24 AZ KY-32 AZ Rev 4

29 SAE FLANGES ORIGIN: NORTH AMERIA AZ3 SAE ODE 61 SPLIT FLANGE LAMPS A TØ B AZ6 SAE ODE 62 SPLIT FLANGE LAMPS lamp Dimensions (mm) Associated Bolt Details UN Bolts Metric Bolts DN Inch Size TØ A B Thread Length Thread Length AZ / / ¼ M8 x AZ3-10 * / / ¼ M8 x AZ / /8-16 1¼ M10 x AZ /8-16 1¼ M10 x AZ / / ½ M10 x AZ / ½ -13 1½ M12 x AZ ½ -13 1½ M12 x AZ / ½ -13 1¾ M12 x AZ /8-11 1¾ M16 x 2 45 * JIS size 10 is used only by Komatsu. This size clamp is not available from Pirtek. Komatsu Flanges differ from 61 Flanges by their use of metric O-Rings instead of Imperial O-Rings, but are in all other respects identical. Never use Imperial O-Rings (Y or OKS) in Komatsu flanges - only KY series K, J, 2J SERIES SAE FLANGE DATA A TØ B lamp Dimensions (mm) DN Inch Size TØ A B Thread Associated Bolt Details UN Bolts Metric Bolts Length 62 Supercat Thread Length 62 Supercat AZ / / ¼ - M8 x AZ / /8-16 1½ 1¾ M10 x AZ / ¾ 1¾ M12 x AZ / ½ -13 1¾ 2" M14 x AZ / /8-11 2¼ 2½ M16 x AZ ¾ -10 2¾ - M20 x Supercat Flange lamps (not available from Pirtek) use the same bolt spacings as 62 but the bolts are generally longer to accommodate the 14.2 mm flange thickness Rev

K, J, 2J SERIES ODE 61 SAE FLANGE SAE FLANGES ORIGIN: NORTH AMERIA 611 / 611L 3000 PSI ODE 61 STRAIGHT STANDARD & LONG FLANGE L 612 / 613 3000 PSI ODE 61 22 & 30 ELBOW FLANGE Flange Hose Bore

30 K, J, 2J SERIES ODE 61 SAE FLANGE SAE FLANGES ORIGIN: NORTH AMERIA 611 / 611L 3000 PSI ODE 61 STRAIGHT STANDARD & LONG FLANGE L 612 / PSI ODE & 30 ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB L K 1/ / / K 3/ /2 12 1/ K 5/ /8 16 5/ J 3/ /2 20 3/ J /4 20 3/ J / J 1.1/ J / / J 1.1/ / L-2020J /4" 20 2" /4" J 1.1/ / / J 1.1/ / / J / / J / J 2.1/2" /16" J 2.1/2" /16" /2" J 3" 48 4" /2" J 3" 48 4" 80 3" Unique to Komatsu 30 Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D 22 ELBOW FLANGES J 3/ /2 20 3/ J /4 20 3/ J / J 1.1/ J 1.1/ / J 1.1/ / / J 1.1/ / / J / / J / J 2.1/2" /16" /2" ELBOW FLANGES J 3/ /2 20 3/ J /4 20 3/ J / J 1.1/ J 1.1/ / J 1.1/ / / J 1.1/ / / J / / J / J 2.1/2" /16" /2" J 3" 48 4" 80 3" Rev 4

31 SAE FLANGES ORIGIN: NORTH AMERIA PSI ODE ELBOW FLANGE PSI ODE ELBOW FLANGE PSI ODE ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D K 1/ / / K 3/ /2 12 1/ K 5/ /8 16 5/ J 3/ /2 20 3/ J /4 20 3/ J / J 1.1/ J / / J 1.1/ / J 1.1/ / / J 1.1/ / / J / / J / J 2.1/2" /16" /2" J 3" 48 4" 80 3" Unique to Komatsu Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D J 3/ /2 20 3/ J /4 20 3/ J / J 1.1/ J 1.1/ / J 1.1/ / / J 1.1/ / / J / / J / J 2.1/2" /16" /2" J 3" 48 4" 80 3" K, J, 2J SERIES ODE 61 SAE FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D J 3/ /2 20 3/ J /4 20 3/ J / J 1.1/ J 1.1/ / J 1.1/ / / J 1.1/ / / J / / J / Rev 4 31

32 K, J, 2J SERIES ODE 61 SAE FLANGE SAE FLANGES ORIGIN: NORTH AMERIA 619 / 619L 3000 PSI ODE FLANGED ELBOW STANDARD & LONG DROP ELBOWS Unique to Komatsu Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D STANDARD DROP ELBOWS K 1/ / / K 3/ /2 12 1/ K 5/ /8 16 5/ J 3/ /2 20 3/ J /4 20 3/ J / J / / J 1.1/ J 1.1/ / J 1.1/ / / J 1.1/ / / J / / J / J 2.1/2" /16" J 2.1/2" /16" /2" J 3" 48 4" /2" J 3" 48 4" 80 3" LONG DROP ELBOWS 619L-1212J-100 3/4" /2" 20 3/4" L-1212J-125 3/4" /2" 20 3/4" L-1616J-120 1" /4" 25 1" L-2016J /4" 20 2" 25 1" L-2020J /4" 20 2" /4" L-2020J /4" 20 2" /4" L-2020J /4" 20 2" /4" L-2020J /4" 20 2" /4" L-2416J /2" /8" 25 1" L-2420J /2" /8" /4" L-2420J /2" /8" /4" L-2424J /2" /8" /2" L-2424J /2" /8" /2" L-2424J /2" /8" /2" L-3224J-114 2" / /2" L-3224J-171 2" / /2" L-3232J-165 2" / L-3232J-203 2" / Rev 4.1

33 SAE FLANGES ORIGIN: NORTH AMERIA 6111 / 6111L 3000 PSI ODE ELBOW FLANGE & LONG DROP 110 ELBOW FLANGE PSI ODE ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D J / J 1.1/ / J 1.1/ / / J / LONG DROP ELBOWS 6111L-2016J / L-2424J / / / Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D J 3/4" /2" 20 3/4" J 1" /4" 25 1" K, J, 2J SERIES ODE 61 SAE FLANGE 33

35 SAE FLANGES ORIGIN: NORTH AMERIA PSI ODE 62 STRAIGHT FLANGE PSI ODE ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB J 3/ /8 20 3/ J /8 20 3/ J / J 1.1/ / Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D J 3/ /8 20 3/ J /8 20 3/ J / J 1.1/ / K, J, 2J SERIES ODE 62 SAE FLANGE PSI ODE ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D J 3/ /8 20 3/ J /8 20 3/ J / J 1.1/ / Rev 4 35

36 K, J, 2J SERIES JAPANESE FITTINGS JAPANESE FITTINGS ORIGIN: JAPAN JBF1 JIS BSPP FEMALE STRAIGHT (MITSUBISHI) JMF1 JIS METRI FEMALE STRAIGHT (KOMATSU) Thread Hose Bore Dimensions (mm) BSPP Size Pipe DN Inch Size A B H ES JBF1-0404K 1/ /4 06 1/ JBF1-0606K 3/ /8" 10 3/ JBF1-0808K 1/ /2 12 1/ JBF1-1212J 3/ /4 20 3/ JBF1-1616J Thread Hose Bore Dimensions (mm) Metric Size Pipe DN Inch Size A B H ES JMF1-1204K M12 x / JMF1-1404K M14 x / JMF1-1406K M14 x / JMF1-1606K M16 x / JMF1-1806K M18 x / JMF1-2006K M20 x / JMF1-2206K M22 x / JMF1-2208K M22 x / JMF1-2408K M24 x / JMF1-2410K M24 x / JMF1-2412J M24 x / JMF1-3012J M30 x / JMF1-3312J M33 x / JMF1-3612J M36 x / JMF1-3316J M33 x JMF1-3616J M36 x JMF1-4220J M42 x / Rev 4

37 JAPANESE FITTINGS ORIGIN: JAPAN K6112BF KOMATSU LOW PRESSURE (80 BAR) STRAIGHT FLANGE WITH 2 BOLT LAMP K6142BF KOMATSU LOW PRESSURE (80 BAR) 45 ELBOW FLANGE WITH 2 BOLT LAMP Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A R S F K6112BF-1616J / K6112BF-2020J 1.1/ / K6112BF-2424J 1.1/ / / KOM identifier can vary between flange head and stem. Flange heads incorporate metric O-Ring dimensions See page 28 Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A R S F D K6142BF-1616J / K6142BF-2020J 1.1/ / K6142BF-2424J 1.1/ / / KOM identifier can vary between flange head and stem. Flange heads incorporate metric O-Ring dimensions See page 28 K, J, 2J SERIES JAPANESE FITTINGS K6192BF KOMATSU LOW PRESSURE (80 BAR) 90 ELBOW FLANGE WITH 2 BOLT LAMP Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A R S F D K6192BF-1616J / K6192BF-2020J 1.1/ / K6192BF-2424J 1.1/ / / KOM identifier can vary between flange head and stem. Flange heads incorporate metric O-Ring dimensions See page 28 Rev 4 37

38 K, J, 2J SERIES JAPANESE FITTINGS JAPANESE FITTINGS ORIGIN: JAPAN K611 KOMATSU STANDARD PRESSURE (210 BAR) STRAIGHT FLANGE KOM K614 KOMATSU STANDARD PRESSURE (210 BAR) 45 ELBOW FLANGE KOM K619 KOMATSU STANDARD PRESSURE (210 BAR) 90 ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A Ø B K 5/ /8 16 5/ K J 3/ /2 20 3/ K J /4 20 3/ K J / K J 1.1/ K J 1.1/ / K J 1.1/ / / K J / KOM identifier can vary between flange head and stem. Flange heads incorporate metric O-Ring dimensions See page 28 Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A Ø B D K 5/ / / K J 3/ /2 20 3/ K J /4 20 3/ K J / K J 1.1/ K J 1.1/ / K J 1.1/ / / K J / KOM identifier can vary between flange head and stem. Flange heads incorporate metric O-Ring dimensions See page KOM Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A Ø B D K 5/ /8 16 5/8 5/ K J 3/ /2 20 3/4 3/ K J /4 20 3/4 3/ K J / K J 1.1/ /4 1.1/ K J 1.1/ / /2 1.1/ K J / KOM identifier can vary between flange head and stem. Flange heads incorporate metric O-Ring dimensions See page 28 Rev 4

MISELLANEOUS FITTINGS PRESSURE WASHER AND WELD ON KT1 KÄRHER STRAIGHT HOSE TAIL OMPLETE WITH NUT JWH JET WASH HANDGRIP Flange Hose Bore Dimensions (mm) Bore Size Ø ins.

5 22 14 10 3/8 6 31 14 36 Hose Bore DN Inch Size Description JWH-04 6 1/4 04 Blue Anti Kink Hand Grip to suit JW210-04 hose JWH-06 10 3/8 06 Blue Anti Kink Hand Grip to suit JW210-06 &

39 MISELLANEOUS FITTINGS PRESSURE WASHER AND WELD ON KT1 KÄRHER STRAIGHT HOSE TAIL OMPLETE WITH NUT JWH JET WASH HANDGRIP Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A B G KT1-2204K M22 x // KT1-2205K M22 x / KT1-2206K M22 x / Hose Bore DN Inch Size Description JWH /4 04 Blue Anti Kink Hand Grip to suit JW hose JWH /8 06 Blue Anti Kink Hand Grip to suit JW & JW hose K, J, 2J SERIES MISELLANEOUS KB (SUPERSEDED) KÄRHER x BSPP ADAPTOR INSERT SEE SETION P AESSORIES IPW-26 Nut Thread Insert Dimensions (mm) Description Metric Size Ø ins. BSPP Inch Size E F L KB Insert 3/ / KN-22 Nut M Rev 4 39

40 K, J, 2J SERIES MISELLANEOUS MISELLANEOUS FITTINGS PRESSURE WASHER AND WELD ON WO1 WELD ON STRAIGHT TAIL (LIFESAVER) Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A Ø B WO1-0404K /4 06 1/ WO1-0606K /8 10 3/ WO1-0808K /2 12 1/ WO1-1010K /8 16 5/ WO1-1212J /4 20 3/ WO1-1616J Rev 4

41 BSP FITTINGS ORIGIN: GREAT BRITAIN BF1 BSPP FEMALE STRAIGHT BSPP Thread Nominal ID Dimensions mm T Size Dash Inch DN A B H BF1-1212X 3/ / BF1-1616X BF1-2020X 1.1/ / BF1-2424X 1.1/ / BF1-3232X X SERIES BSP FITTINGS BF4 BSPP FEMALE 45 ELBOW BSPP Thread Nominal ID Dimensions mm T Size Dash Inch DN A B H D BF4-1212X 3/ / BF4-1616X BF4-2020X 1.1/ / BF4-2424X 1.1/ / BF4-3232X Rev 4 41

X SERIES BSP FITTINGS BSP FITTINGS ORIGIN: GREAT BRITAIN BF9 BSPP FEMALE 90 ELBOW BSPP Thread Nominal ID Dimensions mm T Size Dash Inch DN A B H D BF9-1212X 3/4-14 12 20 3/4 12 66.8 8.7 32 58.

42 X SERIES BSP FITTINGS BSP FITTINGS ORIGIN: GREAT BRITAIN BF9 BSPP FEMALE 90 ELBOW BSPP Thread Nominal ID Dimensions mm T Size Dash Inch DN A B H D BF9-1212X 3/ / BF9-1616X BF9-2020X 1.1/ / BF9-2424X 1.1/ / BF9-3232X BTM1 BSPT MALE STRAIGHT BSPP Thread Nominal ID Dimensions mm T Size Dash Inch DN A B ES BTM1-2020X 1.1/ / BTM1-2424X 1.1/ / BTM1-3232X Rev 4

43 NPT FITTINGS ORIGIN: NORTH AMERIA NM1 NPT MALE STRAIGHT NPT Thread Nominal ID Dimensions mm T Size Dash Inch DN A B ES NM1-2020X 1.1/4-11½ / NM1-2424X 1.1/2-11½ / NM1-3232X 2-11½ X SERIES NPT FITTINGS Rev 4 43

44 X SERIES JI FITTINGS JI FITTINGS ORIGIN: NORTH AMERIA JFI JI FEMALE STRAIGHT JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES JF1-1712X 1.1/ / JF1-2116X 1.5/ JF1-2620X 1.5/ / JF1-3024X 1.7/ / JF1-4032X 2.1/ Thrust wired nut JF4 JI FEMALE 45 ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H JF4-1712X 1.1/ / JF4-2116X 1.5/ JF4-2620X 1.5/ / JF4-3024X 1.7/ / JF4-4032X 2½ Thrust wired nut 44 Rev 4

45 JI FITTINGS ORIGIN: NORTH AMERIA JF9 JI FEMALE 90 ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H JF9-1712X 1.1/ / JF9-2116X 1.5/ JF9-2620X 1.5/ / JF9-3024X 1.7/ / JF9-4032X 2½ Thrust wired nut X SERIES JI FITTINGS JM1 JI MALE STRAIGHT JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B ES JM1-2620X 1.5/ / JM1-3024X 1.7/ / JM1-4032X 2½ Rev 4 45

46 X SERIES ORFS FITTINGS ORFS FITTINGS ORIGIN: NORTH AMERIA OF1 O-RING FAE SEAL FEMALE STRAIGHT OF4 O-RING FAE SEAL FEMALE 45 ELBOW UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES OF1-1212X 1.3/ / OF1-1616X 1.7/ OF1-2020X 1.11/ / OF1-2424X / UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H D OF4-1212X 1.3/ / OF4-1616X 1.7/ OF4-2020X 1.11/ / OF9 O-RING FAE SEAL FEMALE 90 ELBOW X SERIES UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H D OF9-1212X 1.3/ / OF9-1616X 1.7/ OF9-2020X 1.11/ / OF9-2424X / Rev 4

47 METRI FITTINGS ORIGIN: GERMANY DSF1 DKS (HEAVY) METRI FEMALE STRAIGHT DSM1 DKS (HEAVY) METRI MALE STRAIGHT Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H DSF1-3012X M30 x S 20 3/4" DSF1-3612X M36 x S 20 3/4" DSF1-4216X M42 x S DSF1-5220X M52 x S / X SERIES METRI FITTINGS Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B ES DSM1-4216X M42 x S DSM1-5220X M52 x S / Rev

48 X SERIES METRI FITTINGS METRI FITTINGS ORIGIN: GERMANY DSF4 DKS (HEAVY) METRI FEMALE 45 ELBOW DSF9 DKS (HEAVY) METRI FEMALE 90 ELBOW Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H DSF4-3012X M30 x S 20 3/4 12 DSF4-4216X M42 x S DSF4-5220X M52 x S / Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H DSF9-3012X M30 x S 20 3/4 12 DSF9-4216X M42 x S DSF9-5220X M52 x S / Rev 4.1

49 SAE FLANGES ORIGIN: NORTH AMERIA PSI ODE 61 STRAIGHT FLANGE PSI ODE ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB X 1.1/ / X 1.1/ / / X 1.1/ / / X 1.1/ / / X / Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D X 1.1/ X 1.1/ / X 1.1/ / / X 1.1/ / / X / / X / X SERIES ODE 61 SAE FLANGE PSI ODE ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D X 1.1/ / X 1.1/ / / X 1.1/ / / X / / X / Rev 4 49

50 X SERIES ODE 62 SAE FLANGE SAE FLANGES ORIGIN: NORTH AMERIA PSI ODE 62 STRAIGHT FLANGE PSI SUPERAT STRAIGHT SUPERAT FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB X 3/ /8 20 3/ X /8 20 3/ X / X 1.1/ / X 1.1/ / / X 1.1/ / / X 1.1/ / / X / / X / XL * / * XL Series incorporates an extra long ferrule for extreme applications Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T X 3/ /8 20 3/ X /8 20 3/ X / X 1.1/ / X 1.1/ / / X 1.1/ / / X 1.1/ / / X / / X / PSI SUPERAT 22½ ELBOW SUPERAT FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D X 1.1/ / / X 1.1/ / / Rev 4

51 SAE FLANGES ORIGIN: NORTH AMERIA PSI SUPERAT 30 ELBOW SUPERAT FLANGE PSI ODE ELBOW FLANGE PSI SUPERAT 45 ELBOW SUPERAT FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D X 1.1/ / / X 1.1/ / / X 1.1/ / / Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D X 3/ /8 20 3/ X /8 20 3/ X / X 1.1/ / X / / X 1.1/ / / X 1.1/ / / X 1.1/ / / X / / X / XL * / * XL Series incorporates an extra long ferrule for extreme applications X SERIES ODE 62 SAE FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D T X 3/ /8 20 3/ X /8 20 3/ X / X / / X 1.1/ / X 1.1/ / / X 1.1/ / / X 1.1/ / / X / Rev 4 51

52 X SERIES ODE 62 SAE FLANGE SAE FLANGES ORIGIN: NORTH AMERIA PSI ODE ELBOW FLANGE PSI SUPERAT 60 ELBOW SUPERAT FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D X / X 1.1/ / X 1.1/ / / X 1.1/ / / X 1.1/ / / X / / X / Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D T X 1.1/ / / X 1.1/ / / X 1.1/ / / Rev 4

53 SAE FLANGES ORIGIN: NORTH AMERIA PSI ODE ELBOW SUPERAT FLANGE 629 / 629L 6000 PSI ODE 62 STANDARD AND LONG DROP 90 ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D T X 1.1/ / / X 1.1/ / / Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D X 3/ /8 20 3/ X /8 20 3/ X / X 1.1/ / X / / X 1.1/ / / X 1.1/ / / X 1.1/ / / X / / X / XL * / LONG DROP ELBOWS X / X / / / * XL Series incorporates an extra long ferrule for extreme applications X SERIES ODE 62 SAE FLANGE Rev

54 X SERIES ODE 62 SAE FLANGE SAE FLANGES ORIGIN: NORTH AMERIA PSI SUPERAT 90 ELBOW SUPERAT FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D T X 3/ /8 20 3/ X /8 20 3/ X / X 1.1/ / X 1.1/ / / X 1.1/ / / X 1.1/ / / X / Rev 4

55 JAPANESE FITTINGS ORIGIN: JAPAN K611 KOMATSU STANDARD PRESSURE (210 BAR) STRAIGHT FLANGE KOM K614 KOMATSU STANDARD PRESSURE (210 BAR) 45 ELBOW FLANGE KOM Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB K X 1.1/ / K X 1.1/ / / K X / KOM identifier can vary between flange head and stem. Flange heads incorporate metric O-Ring dimensions See page 28 Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D K X 1.1/ / K X 1.1/ / / K X / KOM identifier can vary between flange head and stem. Flange heads incorporate metric O-Ring dimensions See page 28 X SERIES JAPANESE FITTINGS K619 KOMATSU STANDARD PRESSURE (210 BAR) 90 ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D K X 1.1/ / K X 1.1/ / / K X / KOM identifier can vary between flange head and stem. Flange heads incorporate metric O-Ring dimensions See page 28 KOM Rev 4 55

56 D MINING PRODUTS MINING FITTINGS onfiguration Standard Staplelok Super Stapelok lipline (Large Bore) MINING FITTINGS AND ADAPTORS Appearance HOSE TAILS PAGES 55, 56 ADAPTORS SET U PAGE 45 HOSE TAILS PAGE 56 ADAPTORS SET U PAGE 61 HOSE TAILS PAGE 57 ADAPTORS SET U Flushfit HOSE TAILS PAGES ADAPTORS SET U Slimline HOSE TAILS PAGES ADAPTORS SET U SSV / SSKV HOSE TAILS PAGES 64, 65 ADAPTORS SET U PAGES 73, Rev 4

57 STAPLELOK ORIGIN: GERMANY STM1 STANDARD STAPLELOK STRAIGHT WITH STAINLESS STEEL OPTION K / J Series X Series H Series T Series Large Bore Dash Inch DN Dash Inch DN A B D STM1-0604K STM1-0604T 4 1/ / STM1-1004K 6 3/ / STM1-1006J 6 3/ / STM1-1308J 8 1/ / STM1-1610K 10 5/ / STM1-2012J STM1-2012H 12 3/ / STM1-2516J STM1-2516X STM1-3220J STM1-3220X / / STM1-4024J / / STM1-5032J STM1-6340J STM1BS / / / STM1-7548J STAINLESS STEEL FITTINGS STM1SS-0604K 4 1/ / STM1SS-1004K 6 3/ / STM1SS-1006J 6 3/ / STM1SS-1308J 8 1/ / STM1SS-2012J 12 3/ / STM1SS-3220J / / STM1SS-4024J / / STM1SS-5032J Tail design uses a threaded latchment as seen on page 77 STM9 STANDARD STAPLELOK OMPAT ELBOW Nominal Bore Staple E Nominal Bore Hose A A Dimensions mm MINING PRODUTS STAPLELOK FITTINGS B D Nominal Bore Staple Nominal Bore Hose Dimensions mm K / J Series X Series H Series T Series Large Bore Dash Inch DN Dash Inch DN A B D STM9-1004K 6 3/ /4 6 STM9-1006J 6 3/ /8 10 Rev 4 57

58 MINING PRODUTS STAPLELOK FITTINGS STAPLELOK ORIGIN: GERMANY ISTM1 STANDARD STAPLELOK STRAIGHT FOR INDUSTRIAL & HYDRAULI HOSE Ferrule / Hose ombination Nominal Bore Staple R2AT/2S IRFAW Dash Inch DN Dash Inch DN A B D ISTM SS2-32 FFI ISTM SS2-40 FFI / / ISTM SS2-48 FFI-75 * Limited stock available * Suits IFRAS-075 Hose SSTM1 SUPER STAPLE STRAIGHT ONE PIEE TAIL Nominal Bore Hose D D Dimensions mm B B A A s Ferrule / Hose ombination SSTM1 SUPER STAPLE STRAIGHT INTERLOK TAIL Nominal Bore Staple D Nominal Bore Hose B Dimensions mm Steel Stainless Steel Dash Inch DN Dash Inch DN A B D SSTM1-2012H SSTM1SS-2012H 12 3/ / SSTM1-2516X SSTM1-3220X / / SSTM1-4024X SSTM1SS-4024X / / SSTM1-5032X SSTM1-5032XL A Ferrule / Hose ombination Nominal Bore Staple Nominal Bore Hose Dimensions mm Dash Inch DN Dash Inch DN A B D SSTM1-4024I IF13-24 IF / /

59 LIPLINE LOW PROFILE OUPLING MEDIUM PRESSURE BSMS-40 Ferrule LM Male Hose Tail LM1 LIPLINE MALE HOSE TAIL L30-63 Socket OD The threaded latch design of the hose tail / ferrule combination is suited only to use with hose JBF-40 * Maximum Working Pressure 140 bar L1 L D MINING PRODUTS LIPLINE FITTINGS Nominal Bore Staple Nominal Bore Hose Dimensions mm Dash Inch DN Dash Inch DN L L1 D OD LM / / BSMS BRIDGESTONE FERRULE JBF MULTI-SPIRAL HOSE Nominal Bore Staple Dimensions mm Dash Inch DN L OD BSMS / Note threaded latch 59

confi gurations (Standard confi guration design varies according to fi tting size) The Super form embodies a secondary O-Ring to maintain a clean environment in the main bore A clearance area

60 MINING PRODUTS FLUSHFIT FITTINGS FLUSHFIT LOW PROFILE OUPLING STANDARD AND SUPER STANDARD FLUSHFIT OMPONENTS Description: Materials and Specifications: Applications: Steel bodied low profi le coupling system for full bore internal fl ow path with smallest possible exterior dimensions The staple is retained fully within the coupling profi le to be snag-free Available in standard and super confi gurations (Standard confi guration design varies according to fi tting size) The Super form embodies a secondary O-Ring to maintain a clean environment in the main bore A clearance area simplifi es staple extraction Fewer loose parts than similar designs Double width staple Secondary O-Ring Flat Tefl on backup ring Nitrile O-Rings Free cutting steel body Hardened staple in either single width (Standard design) or double width (Super design) 2 material conforms to ( BS M47) (UNI EN 45) 2 1/2 material 50 D (BS ) (UNI EN S355J2G3 extruded tube). Alternatively material conforms to ( BS M07) (UNI EN 11SMnPb30) UTAWAY OF SUPER FLUSHFIT ASSEMBLED JOINT Standard Series: low to medium pressure large bore lines (pressure and return) where the application requires a smooth exterior profi le to avoid snagging Super Series: extra high pressure large bore lines where the application requires a smooth exterior profi le to avoid snagging Refer Pirtek for selection of suitable hoses to use with Flushfi t Standard and Super fi ttings NOMINAL WORKING PRESSURES FLUSHFIT STANDARD AND SUPER Size Standard Flushfit - bar Super Flushfit - bar Dash Inch DN Working Pressure Burst Pressure Working Pressure Burst Pressure / /

61 FFM1 FLUSH FIT STANDARD MALE HOSE TAIL Suited to use with wire braided hydraulic hose Nominal Bore Flush Fit Nominal Bore Hose Dimensions mm J Series Dash Inch DN Dash Inch DN OD OF L O-Ring Teflon Backup FFM1-4024J / / OD x 2.4 Ø 42 x 38 x 1.5 Thick FFM1-5032J FFM1-6340J / /2 63 FFF1 FLUSH FIT STANDARD FEMALE HOSE TAIL Suited to use with wire braided hydraulic hose OD L OF MINING PRODUTS FLUSHFIT FITTINGS Nominal Bore Flush Fit Nominal Bore Hose Dimensions mm K / J Series Dash Inch DN Dash Inch DN OD L OF FFF1-4024J / / FFF1-5032J FFF1-6340J / /

62 MINING PRODUTS FLUSHFIT FITTINGS FFIM1 FLUSH FIT STANDARD MALE INDUSTRIAL HOSE TAIL Ferrule supplied with hose tail Suited to use with FRAS rated air / water hose IRFAW Nominal Bore Flush Fit FFIF1 FLUSH FIT STANDARD FEMALE INDUSTRIAL HOSE TAIL Ferrule supplied with hose tail Internal O-Ring not shown Suited to use with FRAS rated air / water hose IRFAW Nominal Bore Hose D L OF Dimensions Hose Tail mm OD Dimensions Ferrule mm L Series Dash Inch DN Dash Inch DN L D OF Length OD FFIM1-5032L FFIM1-6340L / / Nominal Bore Flush Fit Nominal Bore Hose Dimensions Hose Tail mm Dimensions Ferrule mm L Series Dash Inch DN Dash Inch DN L OD OF Length Ø FFIF1-5032L FFIF1-6340L / /

63 FFSM1 FLUSH FIT SUPER MALE HOSE TAIL Nominal Bore Flush Fit Nominal Bore Hose Dimensions mm J & X Series Dash Inch DN Dash Inch DN L OF D FFSM1-5032J FFSM1-5032X FFSM / /2 63 Uses BSMS-40 Ferrule with JBF-40 hose FFSF1 FLUSH FIT SUPER FEMALE HOSE TAIL D L OF MINING PRODUTS FLUSHFIT FITTINGS Nominal Bore Flush Fit Nominal Bore Hose Dimensions Hose Tail mm J & X Series Dash Inch DN Dash Inch DN L OD OF FFSF1-5032J FFSF1-5032X FFSF / /2 63 Uses BSMS-40 Ferrule with JBF-40 hose 63

spring steel Snag free external profi le NOMINAL WORKING PRESSURES SLIMLINE ORIGINAL Free cutting steel body and pins Flat Tefl on or NBR backup ring Nitrile O-Ring Size Original Slimline - bar Dash

1/2 63 70 280 Low to medium pressure large bore return lines where the application requires a smooth exterior profi le to avoid snagging Two piece ferrule and tail types using the FFI ferrule are

64 MINING PRODUTS SLIMLINE FITTINGS SLIMLINE ORIGINAL LOW PRESSURE OUPLING LOW PROFILE Description: Materials and Specifications: Applications: Steel bodied hose tail originally developed for use in Australian underground coal mines Intended to provide a full bore internal fl ow path with smallest possible exterior dimensions Retention system uses 2 or 3 shear pins and a pin retaining clip in spring steel Snag free external profi le NOMINAL WORKING PRESSURES SLIMLINE ORIGINAL Free cutting steel body and pins Flat Tefl on or NBR backup ring Nitrile O-Ring Size Original Slimline - bar Dash Inch DN Working Pressure Burst Pressure / / Low to medium pressure large bore return lines where the application requires a smooth exterior profi le to avoid snagging Two piece ferrule and tail types using the FFI ferrule are suited to industrial hose only Note: This design has evolved into 3 variations of differing pressure capabilities, and differentiated by the pin size and clip width onsult Pirtek for availability ISLM1 INDUSTRIAL SLIMLINE MALE HOSE TAIL Requires FFI-xx ferrule eg ISLM requires a FFI-50 ferrule to suit FRAS hose Nominal Bore Slimline Nominal Bore Hose Dimensions mm Dash Inch DN Dash Inch DN Length OD utoff Factor* ISLM / / ISLM ISLM / / * Sealing point for cut off factor is at the midpoint of the leading land area 64

65 SLM1 SLIMLINE MALE HOSE TAIL U Series Lightweight is to suit FRAS hose Nominal Bore Slimline Nominal Bore Hose Dimensions mm Dash Inch DN Dash Inch DN Length D2 D1 SLM1-5032J SLM1-5032U SLM1-6340J / / ISLF1 INDUSTRIAL SLIMLINE FEMALE HOSE TAIL Requires FFI-xx ferrule eg ISLF requires a FFI-50 ferrule to suit FRAS hose ød2 L ød1 MINING PRODUTS SLIMLINE FITTINGS Nominal Bore Slimline Nominal Bore Hose Dimensions mm Dash Inch DN Dash Inch DN Length OD utoff Factor * ISLF / / * Sealing point for cut off factor is the internal O-Ring SLF1 SLIMLINE FEMALE HOSE TAIL L ød2 ød1 Nominal Bore Slimline Nominal Bore Hose Dimensions mm Dash Inch DN Dash Inch DN Length D2 D1 SLF1-5032J SLF1-6340J / /

66 MINING PRODUTS SKV FITTINGS SKVM1 STANDARD PRANGE MALE Nominal Bore SKV Nominal Bore Hose ød2 Dimensions mm Dash Inch DN Dash Inch DN D1 D2 L SKVM1-4024J / / SKVM1-5032J SKVM1-6340J / / SKVF1 STANDARD PRANGE FEMALE ød2 Seals L L Retaining Nut ød1 ød1 Nominal Bore SKV Nominal Bore Hose Dimensions mm Dash Inch DN Dash Inch DN D1 D2 L SKVF1-5032J SKVF1-6340J / /

67 SSKVM1 HIGH PRESSURE PRANGE MALE Nominal Bore SSKV Nominal Bore Hose ød2 Dimensions mm Dash Inch DN Dash Inch DN D1 D2 L SSKVM1-1006J 10 3/ /8 10 SSKVM1-1308J 13 1/ / SSKVM1-2012H 20 3/ / SSKVM1-2516X SSKVM1-4024X / / SSKVM1-5032X SSKVM / / Tail design uses a threaded latchment as seen on the lipline fitting page 40. SSKVF1 HIGH PRESSURE PRANGE FEMALE ød2 Seals L L Retaining Nut ød1 ød1 MINING PRODUTS SSKV FITTINGS Nominal Bore SSKV Nominal Bore Hose Dimensions mm Dash Inch DN Dash Inch DN D1 D2 L SSKVF1-5032X

T SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BF1 BSPP FEMALE STRAIGHT BF4 BSPP FEMALE 45 ELBOW BSPP Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H BF1-0203T 1/8-28 02 1/8 5 3/16 03

68 T SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BF1 BSPP FEMALE STRAIGHT BF4 BSPP FEMALE 45 ELBOW BSPP Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H BF1-0203T 1/ /8 5 3/ BF1-0204T 1/ /8 6 1/ BF1-0404T 1/ /4 6 1/ BF1-0604T 3/ /8 6 1/ BF1-0405T 1/ /4 8 5/ BF1-0605T 3/ /8 8 5/ BF1-0406T 1/ /4 10 1/ BF1-0606T 3/ /8 10 3/ BF1-0806T 1/ /2 10 3/ BF1-0808T 1/ /2 12 1/ BF1-1010T 5/ /8 16 5/ BF1-1212T 3/ /4 20 3/ BF1-1612T / BF1-1616T BSPP Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H D BF4-0404T 1/ /4 6 1/ BF4-0606T 3/ /8 10 3/ BF4-0808T 1/ /2 12 1/ BF4-1212T 3/ /4 20 3/ BF4-1616T Rev 4

69 BSP ORIGIN: GREAT BRITAIN BF9 BSPP FEMALE 90 ELBOW BTM1 BSPT MALE STRAIGHT BSPP Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H D BF9-0404T 1/ /4 6 1/ BF9-0604T 3/ /4 6 1/ BF9-0606T 3/ /8 10 3/ BF9-0806T 1/ /8 10 3/ BF9-0808T 1/ /2 12 1/ BF9-1010T 5/ /8 16 5/ BF9-1212T 3/ /4 20 3/ BF9-1616T T SERIES BSP FITTINGS BSPP Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B ES BTM1-0203T 1/ /8 5 3/ BTM1-0403T 1/ /4 5 3/ BTM1-0204T 1/ /8 6 1/ BTM1-0404T 1/ /4 6 1/ BTM1-0605T 3/ /8 8 5/ BTM1-0406T 1/ /4 10 3/ BTM1-0606T 3/ /8 10 3/ BTM1-0608T 3/ /8 12 1/ BTM1-0808T 1/ /2 12 1/ BTM1-1212T 3/ /4 20 3/ BTM1-1616T Rev 4 69

70 T SERIES NPT FITTINGS NPT ORIGIN: NORTH AMERIA NM1 NPT MALE STRAIGHT NPT Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B ES NM1-0203T 1/ /8 5 3/ NM1-0403T 1/ /4 5 3/ NM1-0204T 1/ /8 6 1/ NM1-0404T 1/ /4 6 1/ NM1-0606T 3/ /8 10 3/ NM1-0808T 1/ /2 12 1/ NM1-0810T 1/ /2 16 5/ NM1-1212T 3/ /4 20 3/ NM1-1616T 1-11½ Rev 4

71 JI ORIGIN: NORTH AMERIA JFI JI FEMALE STRAIGHT JM1 JI MALE STRAIGHT JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES JF1-0703T 7/ / JF1-0704T 7/ / JF1-0804T 1/ / JF1-0904T 9/ / JF1-0805T 1/ / JF1-0905T 9/ / JF1-0906T 9/ / JF1-1206T 3/ / JF1-1208T 3/ / JF1-1408T 7/ / JF1-1708T 1.1/ / JF1-1410T 7/ / JF1-1710T 1.1/ / JF1-1712T 1.1/ / JF1-2116T 1.5/ T SERIES JI FITTINGS JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B ES JM1-0703T 7/ / JM1-0704T 7/ / JM1-0904T 9/ / JM1-0905T 9/ / JM1-0906T 9/ / JM1-1206T 3/ / JM1-1208T 3/ / JM1-1408T 7/ / JM1-1410T 7/ /8" JM1-1712T 1.1/ / Rev 4 71

72 T SERIES JI FITTINGS JI ORIGIN: NORTH AMERIA JF4 JI FEMALE 45 ELBOW JF9 JI FEMALE 90 ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H D JF4-0704T 7/ / JF4-0804T 1/ / JF4-0904T 9/ / JF4-0906T 9/ / JF4-1206T 3/ / JF4-1208T 3/ / JF4-1408T 7/ / JF4-1410T 7/ / JF4-1710T 1.1/ / JF4-1712T 1.1/ / JF4-2116T 1.5/ Pin Nut JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H D JF9-0703T 7/ / JF9-0704T 7/ / JF9-0804T 1/ / JF9-0904T 9/ / JF9-0805T 1/ / JF9-0905T 9/ / JF9-0906T 9/ / JF9-1206T 3/ / JF9-1208T 3/ / JF9-1408T 7/ / JF9-1410T 7/ / JF9-1710T 1.1/ / JF9-1712T 1.1/ / JF9-2116T 1.5/ Pin Nut 72 Rev 4

73 SAE ORIGIN: NORTH AMERIA SF1 SAE FEMALE STRAIGHT SF9 SAE FEMALE 90 ELBOW SAE Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES SF1-1004T 5/ / SF1-1006T 5/ / SF1-1712T 1.1/ / T SERIES SAE FITTINGS SAE Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H SF9-1006T 5/ / Rev 4 73

T SERIES ORFS FITTINGS ORFS FITTINGS ORIGIN: NORTH AMERIA OF1 O-RING FAE SEAL FEMALE STRAIGHT OM1 O-RING FAE SEAL MALE STRAIGHT UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H

74 T SERIES ORFS FITTINGS ORFS FITTINGS ORIGIN: NORTH AMERIA OF1 O-RING FAE SEAL FEMALE STRAIGHT OM1 O-RING FAE SEAL MALE STRAIGHT UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES OF1-0404T 9/ / OF1-0604T 11/ / OF1-0606T 11/ / OF1-0806T 13/ / OF1-0808T 13/ / OF1-1008T / OF1-1010T / UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B ES OM1-0404T 9/ / OM1-0606T 11/ / OM1-0808T 13/ / OM1-1008T / Available only to special order 74 Rev 4

ORFS FITTINGS ORIGIN: NORTH AMERIA OF4 O-RING FAE SEAL FEMALE 45 ELBOW OF9 O-RING FAE SEAL FEMALE 90 ELBOW UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H OF4-0404T 9/16-18

5 11 15 24 OF4-0808T 13/16-16 08 08 12 1/2 08 56.5 11 14 24 OF4-1010T 1-14 10 10 16 5/8 10 56.5 13.

75 ORFS FITTINGS ORIGIN: NORTH AMERIA OF4 O-RING FAE SEAL FEMALE 45 ELBOW OF9 O-RING FAE SEAL FEMALE 90 ELBOW UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H OF4-0404T 9/ / OF4-0604T 11/ / OF4-0606T 11/ / OF4-0806T 13/ / OF4-0808T 13/ / OF4-1010T / T SERIES ORFS FITTINGS UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D H OF9-0404T 9/ / OF9-0604T 11/ / OF9-0606T 11/ / OF9-0806T 13/ / OF9-0808T 13/ / OF9-1008T / OF9-1010T / Rev 4 75

T SERIES METRI FITTINGS METRI FITTINGS ORIGIN: GERMANY DLF1 DKL (LIGHT) METRI FEMALE STRAIGHT DLM1 DKL (LIGHT) METRI MALE STRAIGHT Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch

76 T SERIES METRI FITTINGS METRI FITTINGS ORIGIN: GERMANY DLF1 DKL (LIGHT) METRI FEMALE STRAIGHT DLM1 DKL (LIGHT) METRI MALE STRAIGHT Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H DLF1-1204T M12 x L 6 1/ DLF1-1404T M14 x L 6 1/ DLF1-1605T M16 x L 08 5/ DLF1-1606T M16 x L 10 3/ DLF1-1806T M18 x L 10 3/ DLF1-2206T M22 x L 10 3/ DLF1-2208T M22 x L 12 1/2" DLF1-2610T M26 x L 16 5/ DLF1-3012T M30 x L 20 3/ DLF1-3616T M36 x L Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B ES DLM1-1204T M12 x L 6 1/ DLM1-1404T M14 x L 6 1/ DLM1-1605T M16 x L 08 5/ DLM1-1606T M16 x L 10 3/ DLM1-1806T M18 x L 10 3/ DLM1-2206T M22 x L 10 3/ DLM1-2208T M22 x L 12 1/ DLM1-2610T M26 x L 16 5/ DLM1-3012T M30 x L 20 3/ DLM1-3616T M36 x L Rev 4

77 METRI FITTINGS ORIGIN: GERMANY DSF1 DKS (HEAVY) METRI FEMALE STRAIGHT DSM1 DKS (HEAVY) METRI MALE STRAIGHT Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H DSF1-1604T M16 x S 6 1/ DSF1-1804T M18 x S 6 1/ DSF1-2005T M20 x S 8 5/ DSF1-2006T M20 x S 10 3/ DSF1-2206T M22 x S 10 3/ DSF1-2408T M24 x S 12 1/ DSF1-3612T M36 x S 20 3/ T SERIES METRI FITTINGS Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B ES DSM1-1604T M16 x S 6 1/ DSM1-1804T M18 x S 6 1/ DSM1-2006T M20 x S 10 3/ DSM1-2206T M22 x S 10 3/ DSM1-2408T M24 x S 12 1/ DSM1-3612T M36 x S 20 3/ Rev 4 77

78 T SERIES METRI FITTINGS METRI FITTINGS ORIGIN: GERMANY BM1 METRI BANJO STRAIGHT BMB METRI BANJO BOLT Banjo Nominal ID Dimensions mm Bolt Size DN Inch Size A B KBM1-1003T M10 x /16" BM1-1003T M10 x / BM1-1004T M10 x /4" BM1-1204T M12 x /4" BM1-1406T M14 x /8" BM1-1606T M16 x /8" Used in the replacement of Komatsu tube assemblies and Metric Thread Hose Bore Dimension (mm) E Size DN Inch Size A B S1 E BMB-10 M10 x / BMB-12 M12 x / BMB-14 M14 x / BMB-16 M16 x / BMB-18 M18 x , 12 3/8, 1/2 06, BMB-22 M22 x / BMB-26 M26 x / Rev 4

79 JAPANESE FITTINGS ORIGIN: JAPAN JBF1 JIS BSPP FEMALE STRAIGHT (MITSUBISHI) JMF1 JIS METRI FEMALE STRAIGHT (KOMATSU) Thread Hose Bore Dimensions (mm) BSPP Size Pipe DN Inch Size A B H ES JBF1-0404T 1/ /4 06 1/ JBF1-0606T 3/ /8" 10 3/ JBF1-0808T 1/ /2 12 1/ JBF1-1010T 5/ /8 16 5/8 10 Thread Hose Bore Dimensions (mm) Metric Size Pipe DN Inch Size A B H ES JMF1-1204T M12 x / JMF1-1404T M14 x / JMF1-1406T M14 x / JMF1-1606T M16 x / JMF1-1806T M18 x / JMF1-2006T M20 x / JMF1-2206T M22 x / JMF1-2208T M22 x / JMF1-2408T M24 x / JMF1-2410T M24 x / JMF1-2412T M24 x / JMF1-3012T M30 x / JMF1-3312T M33 x / T SERIES JAPANESE FITTINGS Rev 4 79

80 T SERIES MISELLANEOUS MISELLANEOUS FITTINGS WELD ON WO1 WELD ON STRAIGHT TAIL (LIFESAVER) Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A Ø B WO1-0404T /4 06 1/ WO1-0606T /8 10 3/ WO1-0808T /2 12 1/ WO1-1010T /8 16 5/ WO1-1212T /4 20 3/ WO1-1616T Rev 4

81 FERRULES ORIGIN: N/A IF INTERLOK FERRULES INTERLOK To Suit Hose Bore Dimension (mm) Hose DN Inch Size L Ø D IF13-12I 35, 42, 100 R13, 100 R / IF13-16I 35, 42, 100 R13, 100 R IF13-20I 35, 42, 100 R13, XT5, 100 R / IF13-24I 35, 42, 100 R13, XT5, 100 R / IF13-32I 35, 42, 100 R13, XT IFEH INTERLOK EXTRA HEAVY FERRULES IFWB-08I WB (WATERBLAST) 12 1/2 08 IFWB-12I WB (WATERBLAST) 20 3/4 12 To Suit Hose Bore Dimension (mm) Hose DN Inch Size L Ø D IFEH-32I 42EH INTERLOK FITTINGS These ferrules are for use within a complete 'extra heavy' environment. For maximum effectiveness, all components of the system should be deployed. The recommended components include: Hose Guard EHG-032 Hose Boot EHB-032 Sealing rings for the hose tail YEH-32 (2 required) A compatible interlock hose tail with 'EH' designation in the See page G76 for hose guard and boot details. Additionally, those tails utilising a tapered flange must use the appropriate flange clamp AFTF6-32 Rev

82 INTERLOK JI FITTINGS JI FITTINGS ORIGIN: NORTH AMERIA JFI JI FEMALE STRAIGHT JF4 JI FEMALE 45 ELBOW JI Thread Hose Bore Dimensions (mm) Thread T Size Tube DN Inch Size A B H JF1-1712I 1.1/ / JF1-2116I 1.5/ JF1-2620I 1.5/ / JI Thread Hose Bore Dimensions (mm) Thread T Size Tube DN Inch Size A B H D JF4-1712I 1.1/ / JF4-2116I 1.5/ JF4-2620I 1.5/ / JF9 JI FEMALE 90 ELBOW JI Thread Hose Bore Dimensions (mm) Thread T Size Tube DN Inch Size A B H D JF9-1712I 1.1/ / JF9-2116I 1.5/ JF9-2620I 1.5/ / Rev 4

83 SAE FLANGES ORIGIN: NORTH AMERIA PSI ODE ELBOW FLANGE PSI ODE ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D I / Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I 1.1/ / I / INTERLOK ODE 61 FLANGES Rev 4 83

84 INTERLOK ODE 62 FLANGES SAE FLANGES ORIGIN: NORTH AMERIA 621 / 621L 6000 PSI ODE 62 STANDARD AND EXTENDED STRAIGHT FLANGES PSI SUPERAT STRAIGHT SUPERAT FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB L I / I 1.1/ / I 1.1/ / / I 1.1/ / / I 1.1/ / / I / / I / EH-3232I / EXTENDED NEK FLANGES 621L-2020I / / / L-2424I / / / Use of Hose Guard and Boot EHG-032 and EHB-032 is recommended in conjunction. See page G76 These Extra Heavy fittings require also Ferrule IFEH-32I and 2 O-Rings YEH-32 (as a seal on the tail) Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T I 1.1/ / / I 1.1/ / / I 1.1/ / / EHTF 6000 PSI EXTRA HEAVY STRAIGHT TAPERED FLANGE B Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size D ØB A H 621EHTF-3232I / Use of Hose Guard and Boot EHG-032 and EHB-032 is recommended in conjunction. See page G76 These Extra Heavy fittings require also Ferrule IFEH-32I and 2 O-Rings YEH-32 (as a seal on the tail) The appropriate flange clamp is designated AFTF6-32 (see page Dxx) 84 Rev 4.2

85 SAE FLANGES ORIGIN: NORTH AMERIA PSI ODE ELBOW FLANGE PSI SUPERAT 22 ELBOW SUPERAT FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I 1.1/ / / I / INTERLOK ODE 62 FLANGES Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I 1.1/ / / EHTF 6000 PSI EXTRA HEAVY 22½ ELBOW TAPERED FLANGE B Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size D ØB A H 622EHTF-3232I / Use of Hose Guard and Boot EHG-032 and EHB-032 is recommended in conjunction. See page G76 These Extra Heavy fittings require also Ferrule IFEH-32I and 2 O-Rings YEH-32 (as a seal on the tail) The appropriate flange clamp is designated AFTF6-32 (see page Dxx) 85

86 INTERLOK ODE 62 FLANGES SAE FLANGES ORIGIN: NORTH AMERIA PSI SUPERAT 30 ELBOW SUPERAT FLANGE PSI ODE ELBOW FLANGE PSI SUPERAT 45 ELBOW SUPERAT FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I 3/ /8 20 3/ I /8 20 3/ I / I 1.1/ / I 1.1/ / / I 1.1/ / / I 1.1/ / / Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I / I 1.1/ / I 1.1/ / / I 1.1/ / / I 1.1/ / / I / / I / EHL-3232I / Use of Hose Guard and Boot EHG-032 and EHB-032 is recommended in conjunction. See page G76 These Extra Heavy fittings require also Ferrule IFEH-32I and 2 O-Rings YEH-32 (as a seal on the tail) Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I 1.1/ / / I 1.1/ / /

87 SAE FLANGES ORIGIN: NORTH AMERIA 624EHTF 6000 PSI EXTRA HEAVY 45 ELBOW TAPERED FLANGE B PSI ODE ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size D ØB A H 624EHTF-3232I / Use of Hose Guard and Boot EHG-032 and EHB-032 is recommended in conjunction. See page G76 These Extra Heavy fittings require also Ferrule IFEH-32I and 2 O-Rings YEH-32 (as a seal on the tail) The appropriate flange clamp is designated AFTF6-32 (see page Dxx) Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I 1.1/ / / I 1.1/ / / INTERLOK ODE 62 FLANGES PSI SUPERAT 60 ELBOW SUPERAT FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I 3/ /8 20 3/ I /8 20 3/ I / I 1.1/ / I 1.1/ / / I 1.1/ / / I 1.1/ / / Rev 4 87

88 INTERLOK ODE 62 FLANGES SAE FLANGES ORIGIN: NORTH AMERIA PSI SUPERAT 67 ELBOW SUPERAT FLANGE 629 / 629L 6000 PSI ODE 62 STANDARD AND LONG DROP 90 ELBOW FLANGES Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I / I 1.1/ / / Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I / I 1.1/ / I 1.1/ / / I 1.1/ / / I 1.1/ / / I / / I / EHL-3232I / LONG DROP ELBOWS 629L-2020I / / / L-2020I / / / Use of Hose Guard and Boot EHG-032 and EHB-032 is recommended in conjunction. See page G76 These Extra Heavy fittings require also Ferrule IFEH-32I and 2 O-Rings YEH-32 (as a seal on the tail) 88 Rev 4

89 SAE FLANGES ORIGIN: NORTH AMERIA PSI SUPERAT 90 ELBOW SUPERAT FLANGE 629EHTF 6000 PSI EXTRA HEAVY 90 ELBOW TAPERED FLANGE H D A Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB T D I 1.1/ / / I 1.1/ / / I 1.1/ / / Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size D ØB A H 624EHTF-3232I / Use of Hose Guard and Boot EHG-032 and EHB-032 is recommended in conjunction. See page G76 These Extra Heavy fittings require also Ferrule IFEH-32I and 2 O-Rings YEH-32 (as a seal on the tail) The appropriate flange clamp is designated AFTF6-32 (see page Dxx) INTERLOK ODE 62 FLANGES B W Rev

90 INTERLOK DKS METRI WATERBLAST FITTINGS ORIGIN: GERMANY DSF1 METRI DKS STRAIGHT FEMALE (WATERBLAST APPLIATIONS) Metric Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H DSF1-2408WI M24 x S 12 1/2 08 DSF1-3612WI M36 x S 20 3/4 12 These fittings are for fitment to waterblast hoses in combination with IFWB Ferrules 90 Rev 4

91 SAE FLANGES ORIGIN: NORTH AMERIA / / PSI ODE 61 STRAIGHT FLANGE PSI ODE 61 22½ ELBOW FLANGE A Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB ½ / ½ / ½ ½ Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D ½ / ½ ½ / 954 LARGE BORE ODE 61 FLANGES D B / PSI ODE ELBOW FLANGE A Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D ½ / ½ ½ D B Rev 4 91

92 934 / 954 LARGE BORE ODE 61 FLANGES SAE FLANGES ORIGIN: NORTH AMERIA / / PSI ODE ELBOW FLANGE / PSI ODE ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D ½ / ½ ½ Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D ½ / ½ ½ PSI ODE 61 67½ ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D ½ / ½ ½ Rev 4

93 SAE FLANGES ORIGIN: NORTH AMERIA / PSI ODE ELBOW FLANGE Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A ØB D ½ / ½ ½ / 954 LARGE BORE ODE 61 FLANGES Rev 4 93

94 A SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BF1 BSPP FEMALE STRAIGHT (FERRULE SUPPLIED) BTM1 BSPT MALE STRAIGHT (FERRULE SUPPLIED) BSPP Thread 100R5 Bore Dimensions mm T Size Pipe DN Inch Size L S1 S2 BF1-0404A 1/ /4 5 3/ BF1-0606A 3/ /8 8 5/ BF1-0808A 1/ / / BF1-1212A 3/ /4 16 5/ BF1-1616A / BF1-2020A 1.1/ ¼ /8 20 BF1-2424A 1.1/ ½ /8 24 BF1-3232A /16 32 BSPP Thread 100R5 Bore Dimensions mm T Size Pipe DN Inch Size L S1 BTM1-0404A 1/ /4 5 3/16 04 BTM1-0606A 3/ /8 8 5/16 06 BTM1-0808A 1/ / /32 08 BTM1-1212A 3/ /4 16 5/8 12 BTM1-1616A / Rev 4

95 NPT ORIGIN: NORTH AMERIA NM1 NPT MALE STRAIGHT (FERRULE SUPPLIED) NPT Thread 100R5 Bore Dimensions mm T Size Pipe DN Inch Size L S1 NM1-0204A 1/ /8 5 3/ NM1-0404A 1/ /4 5 3/ NM1-0405A 1/ /4 6 1/4" NM1-0606A 3/ /8 8 5/ NM1-0808A 1/ / / NM1-1212A 3/ /4 16 5/ NM1-1616A / NM1-2020A 1.1/ / / NM1-2424A 1.1/ / / A SERIES NPT FITTINGS Rev 4 95

96 A SERIES JI FITTINGS JI FITTINGS ORIGIN: NORTH AMERIA JF1 JI FEMALE STRAIGHT (FERRULE SUPPLIED) JF4 JI FEMALE 45 ELBOW (FERRULE SUPPLIED) JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size L S1 S2 JF1-0704A 7/ / JF1-0805A 1/ / JF1-0906A 9/ / JF1-1208A 3/ / JF1-1210A 3/ / JF1-1410A 7/ / JF1-1712A 1.1/ / JF1-2116A 1.5/ / JF1-2620A 1.5/ / JF1-3024A 1.7/ / JF1-4032A 2.1/ / JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A H S1 S2 JF4-0704A 7/ / JF4-0906A 9/ / JF4-1208A 3/ / JF4-1410A 7/ / JF4-1712A 1.1/ / JF4-2116A 1.5/ / JF9 / JFL9 JI FEMALE 90 ELBOW (FERRULE SUPPLIED) 96 JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A H S1 S2 JF9-0704A 7/ / JF9-0805A 1/ / JF9-0906A 9/ / JFL9-0906A 9/ / JF9-1208A 3/ / JFL9-1208A 3/ / JF9-1210A 3/ / JF9-1410A 7/ / JFL9-1410A 7/ / JF9-1712A 1.1/ / JF9-2116A 1.5/ / JF9-2620A 1.5/ / JF9-3024A 1.7/ / JF9-4032A 2.1/ / Rev 4

97 SAE FITTINGS ORIGIN: NORTH AMERIA SF1 SAE FEMALE STRAIGHT (FERRULE SUPPLIED) SF4 SAE FEMALE 45 ELBOW (FERRULE SUPPLIED) JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size L S1 S2 SF1-1006A 5/ / SF1-1712A 1.1/ / A SERIES SAE FITTINGS JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A H S1 S2 SF4-1006A 5/ / SF9 SAE FEMALE 90 ELBOW (FERRULE SUPPLIED) JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A H S1 S2 SF9-1006A 5/ / Rev 4 97

98 B SERIES JI / ORFS FITTINGS JI / ORFS FITTINGS ORIGIN: NORTH AMERIA SFB FERRULE TO SUIT 45 HOSE JFI JI FEMALE STRAIGHT ES L H Hose Bore Dimensions (mm) To Suit Hose DN Inch Size L SFB / JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES JF1-1210B 3/ / JF1-1410B 7/ / Use in conjunction with Ferrule SFB-10 on Hose T A B OF1 O-RING FAE SEAL FEMALE STRAIGHT ES H UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H ES OF1-1010B 1" /8" OF1-1210B 1.3/ /8" Use in conjunction with Ferrule SFB-10 on Hose T A B 98 Rev 4

99 ORFS / SAE FLANGE ORIGIN: NORTH AMERIA OF9 O-RING FAE SEAL FEMALE 90 ELBOW A T H D B PSI ODE ELBOW FLANGE A D UN Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B H D OF9-1010B 1" /8" Use in conjunction with Ferrule SFB-10 on Hose Flange Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size A D B 1/2" 8 1.3/16" 16 5/8" B 3/4" /2" 16 5/8" Use in conjunction with Ferrule SFB-10 on Hose B SERIES ORFS / SAE FLANGE FITTINGS Rev 4 99

100 R SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BF1 BSPP FEMALE STRAIGHT BF4 BSPP FEMALE 45 ELBOW BSPP Thread Nominal ID Dimensions mm T Size Dash Inch DN A B H BF1-0404R 1/ /16" BF1-0405R 3/ /4" BF1-0606R 3/ /16" BF1-0808R 1/ /32" BF1-0810R 5/ /2" BF1-1212R 3/ /8" BF1-1616R /8" BF1-2020R 1.1/ /8" BF1-2424R 1.1/ /8" BF1-3232R /16" BSPP Thread Nominal ID Dimensions mm T Size Dash Inch DN A B H D BF4-0606R 3/ /16" BF9 BSPP FEMALE 90 ELBOW 100 BSPP Thread Nominal ID Dimensions mm T Size Dash Inch DN A B H D BF9-0404R 1/ /16" BF9-0604R 3/ /16" BF9-0606R 3/ /16" BF9-0806R 1/ /16" BF9-0808R 1/ /32" BF9-1010R 5/ /2" BF9-1212R 3/ /8" BF9-1616R /8" BF9-2020R 1.1/ /8" BF9-2424R 1.1/ /8" BF9-3232R /16" Rev 4.1

101 BSP ORIGIN: GREAT BRITAIN BTM1 BSPT MALE STRAIGHT BSPP Thread Nominal ID Dimensions mm T Size Dash Inch DN A B ES BTM1-0405R 1/ / BTM1-0606R 3/ / BTM1-0808R 1/ / BTM1-0810R 1/ / BTM1-1212R 3/4" /8" BTM1-1616R / R SERIES BSP FITTINGS Rev

102 R SERIES JI FITTINGS JI FITTINGS ORIGIN: NORTH AMERIA JFI JI FEMALE STRAIGHT JI Thread Hose Bore Dimensions (mm) Thread Size Tube Dash Inch DN A B H ES JF1-0704R 7/ / JF1-0805R 1/ / JF1-1205R 3/ / na 23 JF1-0906R 9/ / JF1-1206R 3/ / JF1-1208R 3/ / JF1-1210R 3/ / JF1-1410R 7/ / JF1-1710R 1.1/ / JF1-1712R 1.1/ / JF1-2116R 1.5/ / JF1-2620R 1.5/ / JF1-3024R 1.7/ / JF1-4032R 2.1/ / Thrust wired nut JF4 JI FEMALE 45 ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube Dash Inch DN A B H D JF4-0704R 7/ / JF4-0804R 1/ / JF4-0904R 9/ / JF4-0906R 9/ / JF4-1206R 3/ / JF4-1208R 3/ / JF4-1408R 7/ / JF4-1410R 7/ / JF4-1710R 1.1/ / JF4-1712R 1.1/ / JF4-2112R 1.5/ / JF4-2116R 1.5/ / JF4-2620R 1.5/ / JF4-3024R 1.7/ / JF4-4032R 2.1/ / Thrust wired nut 102 Rev 4.1

103 JI FITTINGS ORIGIN: NORTH AMERIA JF9 JI FEMALE 90 ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube Dash Inch DN A B H D JF9-0704R 7/ / JF9-0804R 1/ / JF9-0805R 1/ / JF9-0906R 9/ / JF9-1208R 3/ / JF9-1210R 3/ / JF9-1410R 7/ / JF9-1712R 1.1/ / JF9-2116R 1.5/ / JF9-2620R 1.5/ / JF9-3024R 1.7/ / JF9-4032R 2.1/ / R SERIES JI FITTINGS JFL9 JI FEMALE LONG DROP 90 ELBOW JI Thread Hose Bore Dimensions (mm) Thread Size Tube Dash Inch DN A B H D JFL9-0906R 9/ / JFL9-1712R 1.1/ / Rev

104 R SERIES SAE / NPT FITTINGS SAE / NPT ORIGIN: NORTH AMERIA SF1 SAE FEMALE STRAIGHT NM1 NPT MALE STAIGHT SAE Thread Hose Bore Dimensions (mm) Thread Size Tube Dash Inch DN A B H ES SF1-1006R 5/ / SF1-1712R 1.1/ / NPT Thread Nominal ID Dimensions mm T Size Dash Inch DN A B ES NM1-0404R 1/ /16" NM1-0606R 3/ /16" NM1-0808R 1/ /32" NM1-1212R 3/ /8" NM1-1616R 1-11½ /8" Rev 4.1

105 ORFS FITTINGS ORIGIN: NORTH AMERIA OF1 O-RING FAE SEAL FEMALE STRAIGHT OF4 O-RING FAE SEAL FEMALE 45 ELBOW UN Thread Hose Bore Dimensions (mm) Thread Size Tube Dash Inch DN A B H ES OF1-0404R 9/ /16" OF1-0606R 11/ /16" OF1-0806R 13/ /16" OF1-0808R 13/ /32" OF1-1010R /2" OF1-1212R 1.3/ /8" OF1-1616R 1.7/ /8" R SERIES ORFS FITTINGS UN Thread Hose Bore Dimensions (mm) Thread Size Tube Dash Inch DN A B H D OF4-0404R 9/ /16" OF4-0606R 11/ /16" OF4-0808R 13/ /32" OF4-1212R 1.3/ /8" OF4-1616R 1.7/ /8" OF9 O-RING FAE SEAL FEMALE 90 ELBOW UN Thread Hose Bore Dimensions (mm) Thread Size Tube Dash Inch DN A B H D OF9-0404R 9/ /16" OF9-0606R 11/ /16" OF9-0808R 13/ /32" OF9-1010R 1" /2" OF9-1212R 1.3/ /8" OF9-1616R 1.7/ /8" Rev

106 P SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BF1 BSPP FEMALE STRAIGHT PUSH FIT BF9 BSP FEMALE PUSH FIT 90 OMPAT ELBOW BSPP Thread Hose Bore Dimensions mm T Size Pipe DN Inch Size L S1 S2 BF1-0204P 1/ /8 6 1/ BF1-0404P 1/ /4 6 1/ BF1-0406P 1/ /4 10 3/ BF1-0606P 3/ /8 10 3/ BF1-0806P 1/ /2 10 3/ BF1-0608P 3/ /8 12 1/ BF1-0808P 1/ /2 12 1/ BF1-0810P 1/ /2 16 5/ BF1-1212P 3/ /4 20 3/ BF1-1616P BSPP Thread Hose Bore Dimensions mm T Size Pipe DN Inch Size A B D S1 S2 d BF9-0404P 1/ /4 6 1/ BF9-0606P 3/ /8 10 3/ BF9-0808P 1/ /2 12 1/ BF9-1212P 3/ /4 20 3/ BPM1 BSPP MALE STRAIGHT PUSH FIT BSPP Thread Hose Bore Dimensions mm T Size Pipe DN Inch Size A L S1 d BF1-0808P 1/ /2 12 1/ Rev 4

107 BSP ORIGIN: GREAT BRITAIN BTM1 BSPT MALE STRAIGHT PUSH FIT BSPT Thread Hose Bore Dimensions mm T Size Pipe DN Inch Size A L S1 d BTM1-0204P 1/ /8 6 1/ BTM1-0404P 1/ /4 6 1/ BTM1-0406P 1/ /4 10 3/ BTM1-0606P 3/ /8 10 3/ BTM1-0806P 1/ /2 10 3/8 06 BTM1-0608P 3/ /8 12 1/2 08 BTM1-0808P 1/ /2 12 1/ BTM1-0810P 1/ /2 16 5/8 10 BTM1-1212P 3/ /4 20 3/ P SERIES BSP FITTINGS Rev 4 107

108 P SERIES NPT FITTINGS NPT ORIGIN: NORTH AMERIA NM1 NPT MALE STRAIGHT PUSH FIT NPT Thread Hose Bore Dimensions mm T Size Pipe DN Inch Size A L S1 d NM1-0204P 1/ /8 6 1/ NM1-0404P 1/ /4 6 1/ NM1-0406P 1/ /4 10 3/ NM1-0606P 3/ /8 10 3/ NM1-0608P 3/ /8 12 1/ NM1-0808P 1/ /2 12 1/ NM1-1212P 3/ /4 20 3/ Rev 4

109 JI ORIGIN: NORTH AMERIA JF1 JI FEMALE STRAIGHT PUSH FIT JF9 JI FEMALE 90 OMPAT ELBOW PUSH FIT JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A L S2 d JF1-0704P 7/ / JF1-0804P 1/ / JF1-0904P 9/ / JF1-0906P 9/ / JF1-1206P 3/ / JF1-1208P 3/ / JF1-1408P 7/ / JF1-1410P 7/ /8 10 JF1-1710P 1.1/ /8 10 JF1-1712P 1.1/ / JF1-2116P 1.5/ P SERIES JI FITTINGS JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D S1 S2 JF9-0704P 7/ / JF9-0804P 1/ /4 04 JF9-0904P 9/ / JF9-0906P 9/ / JF9-1206P 3/ / JF9-1208P 3/ / JF9-1408P 7/ /2 08 JF9-1410P 7/ / JF9-1712P 1.1/ / JM1 JI MALE STRAIGHT PUSH FIT JI Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A L S1 d JM1-0704P 7/ / JM1-0804P 1/ /4 04 JM1-0904P 9/ / JM1-0906P 9/ / JM1-1206P 3/ / JM1-1208P 3/ / JM1-1408P 7/ /2 08 JM1-1410P 7/ / JM1-1712P 1.1/ / Rev 4 109

110 P SERIES SAE FITTINGS SAE ORIGIN: NORTH AMERIA SF1 SAE FEMALE STRAIGHT PUSH FIT SF9 SAE FEMALE 90 OMPAT ELBOW PUSH FIT SAE Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A L S2 d SF1-1004P 5/ / SF1-1006P 5/ / SF1-1408P 7/ / SF1-1712P 1.1/ / SAE Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A B D S1 S2 SF9-1006P 5/ / SM1 SAE MALE STRAIGHT PUSH FIT SAE Thread Hose Bore Dimensions (mm) Thread Size Tube DN Inch Size A L S1 d SM1-1006P 9/ / SM1-1712P 1.1/ / Rev 4

111 MISELLANEOUS FITTINGS WELD ON AND HOSE JOINERS WO1 WELD ON STRAIGHT TAIL PUSH FIT HJ1 HOSE JOINER PUSH FIT Tube Weld Hose Bore Dimensions (mm) Bore Size Ø ins. DN Inch Size L Ø B d WO1-0404P /4 06 1/ WO1-0606P /8 10 3/ WO1-0808P /2 12 1/ WO1-1010P /8 16 5/ WO1-1212P /4 20 3/ Hose tail Hose Tail Dimensions (mm) DN Inch Size DN Inch Size A L d HJ1-0404P 06 1/ / HJ1-0606P 10 3/ / HJ1-0808P 12 1/ / HJ1-1010P 16 5/ / HJ1-1212P 20 3/ / P SERIES MISELLANEOUS Rev 4 111

F SERIES FERRULES FERRULES ORIGIN: N/A RN1 / RN2 FERRULES FOR FIELD ATTAHABLE FITTINGS TO SUIT R1AT AND R2AT NON-SKIVE HOSES Hose Bore Dimension (mm) To Suit Hose DN Inch Size L H RN1-04 R1AT-04 06

112 F SERIES FERRULES FERRULES ORIGIN: N/A RN1 / RN2 FERRULES FOR FIELD ATTAHABLE FITTINGS TO SUIT R1AT AND R2AT NON-SKIVE HOSES Hose Bore Dimension (mm) To Suit Hose DN Inch Size L H RN1-04 R1AT /4 04 RN1-06 R1AT /8 06 RN1-08 R1AT /2 08 RN1-10 R1AT /8 10 RN1-12 R1AT /4 12 RN1-16 R1AT RN2-04 R2AT /4 04 RN2-06 R2AT /8 06 RN2-08 R2AT /2 08 RN2-10 R2AT /8 10 RN2-12 R2AT /4 12 RN2-16 R2AT Rev 4

113 BSP ORIGIN: GREAT BRITAIN BF1 BSPP FEMALE STRAIGHT (FERRULE NOT SUPPLIED) BTM1 BSPT MALE STRAIGHT (FERRULE NOT SUPPLIED) BSPP Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H BF1-0404F 1/ /4 6 1/ BF1-0604F 3/ /8 6 1/ BF1-0606F 3/ /8 10 3/ BF1-0806F 1/ /2 10 3/ BF1-0808F 1/ /2 12 1/ BF1-1212F 3/ /4 20 3/ BF1-1616F F SERIES BSP FITTINGS BSPT Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size L S1 BTM1-0404F 1/ /4 6 1/ BTM1-0604F 3/ /8 6 1/ BTM1-0606F 3/ /8 10 3/ BTM1-0806F 1/ /2 10 3/ BTM1-0808F 1/ /2 12 1/ BTM1-1212F 3/ /4 20 3/ BTM1-1616F Rev 4 113

114 F SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BF4 BSPP FEMALE 45 ELBOW (FERRULE NOT SUPPLIED) BF9 BSPP FEMALE 90 ELBOW (FERRULE NOT SUPPLIED) BSPP Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H D BF4-0404F 1/ /4 6 1/ BF4-0606F 3/ /8 10 3/ BF4-0808F 1/ /2 12 1/ BF4-1010F 5/ /8 16 5/ BF4-1212F 3/ /4 20 3/ BF4-1616F BSPP Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H D BF9-0404F 1/ /4 6 1/ BF9-0606F 3/ /8 10 3/ BF9-0808F 1/ /2 12 1/ BF9-1212F 3/ /4 20 3/ BF9-1616F BF9 BSPP FEMALE 90 OMPAT ELBOW (FERRULE NOT SUPPLIED) BSPP Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H D BF9-0404F 1/ /4 6 1/ BF9-0606F 3/ /8 10 3/ BF9-0806F 1/ /2 10 3/ BF9-0808F 1/ /2 12 1/ BF9-1212F 3/ /4 20 3/ Rev 4

115 JI ORIGIN: NORTH AMERIA JF1 JI FEMALE STRAIGHT (FERRULE NOT SUPPLIED) JM1 JI MALE STRAIGHT (FERRULE NOT SUPPLIED) JI Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H JF1-0704F 7/ / JF1-0804F 1/ / JF1-0904F 9/ / JF1-0906F 9/ / JF1-1206F 3/ / JF1-1208F 3/ / JF1-1408F 7/ / JF1-1410F 7/ / JF1-1710F 1.1/ / JF1-1712F 1.1/ / JF1-2112F 1.5/ / JF1-2116F 1.5/ F SERIES JI FITTINGS JI Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B ES JM1-0704F 7/ / JM1-0904F 9/ / JM1-0906F 9/ / JM1-1206F 3/ / JM1-1208F 3/ / JM1-1408F 7/ / JM1-1708F 1.1/ / JM1-1710F 1.1/ / JM1-1712F 1.1/ / JM1-1912F 1.3/ / JM1-2112F 1.5/ / JM1-2116F 1.5/ Rev 4 115

116 F SERIES JI FITTINGS JI ORIGIN: NORTH AMERIA JF4 JI FEMALE 45 ELBOW (FERRULE NOT SUPPLIED) JF9 JI FEMALE 90 ELBOW (FERRULE NOT SUPPLIED) JI Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H D JF4-0704F 7/ / JF4-0804F 1/ / JF4-0904F 9/ / JF4-0906F 9/ / JF4-1206F 3/ / JF4-1208F 3/ / JF4-1408F 7/ / JF4-1712F 1.1/ / JF4-2112F 1.5/ / JF4-2116F 1.5/ JF9 JI FEMALE 90 OMPAT ELBOW (FERRULE NOT SUPPLIED) JI Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H D JF9-0704F 7/ / JF9-0804F 1/ / JF9-0904F 9/ / JF9-0906F 9/ / JF9-1206F 3/ / JF9-1208F 3/ / JF9-1408F 7/ / JF9-1410F 7/ / JF9-1712F 1.1/ / JF9-2116F 1.5/ JI Thread Nominal ID Dimensions mm T Size Pipe DN Inch Size A B H D JF9-0704F 7/ / JF9-0804F 1/ / JF9-0904F 9/ / JF9-1206F 3/ / JF9-1208F 3/ / JF9-1408F 7/ / Rev 4

117 BSP ORIGIN: GREAT BRITAIN BPM1 BSPP MALE STRAIGHT SEPARATE LAMP REQUIRED BTM1 BSPT MALE STRAIGHT SEPARATE LAMP REQUIRED BSPP Thread Nominal ID Dimensions mm E Size Pipe Dash Inch DN A B L S1 BPM1-1212L 3/ /4 20 3/ BPM1-2012L 1.1/ /4 20 3/ BPM1-1216L 3/ / BPM1-1616L BPM1-2016L 1.1/ / BPM1-2416L 1.1/ / BPM1-1620L /4 20 BPM1-2020L 1.1/ / / BPM1-2420L 1.1/ / / BPM1-1624L /2 24 BPM1-2024L 1.1/ / / BPM1-2424L 1.1/ / /2 24 L SERIES BSP FITTINGS BSPP Thread Nominal ID Dimensions mm E Size Pipe Dash Inch DN A B L S1 BTM1-0812L 1/ /2 20 3/ BTM1-1212L 3/ /4 20 3/ BTM1-1216L 3/ / BTM1-1220L 3/ / / BTM1-1616L BTM1-2016L 1.1/ / BTM1-1620L / BTM1-2020L 1.1/ / / BTM1-2420L 1.1/ / / BTM1-1624L / BTM1-2024L 1.1/ / / BTM1-2424L 1.1/ / / BTM1-3232L Rev 4 117

118 L SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BTM9 BSPT MALE 90 ELBOW SEPARATE LAMP REQUIRED BPM9 BSPP MALE 90 ELBOW SEPARATE LAMP REQUIRED BSPT Thread Nominal ID Dimensions mm Thread E Size Pipe Dash Inch DN A B S1 D BTM9-0812L 1/ /2 20 3/ BTM9-1212L 3/ /4 20 3/ BTM9-1216L 3/ / BTM9-1220L 3/ / / BTM9-1616L BTM9-2016L 1.1/ / BTM9-1620L / BTM9-2020L 1.1/ / / BTM9-1624L / BTM9-2024L 1.1/ / / BTM9-2424L 1.1/ / / BSPP Thread Nominal ID Dimensions mm Thread E Size Pipe Dash Inch DN A B S1 D BPM9-1212L 3/ /4 20 3/ BPM9-1216L 3/ / BPM9-1616L BPM9-2016L 1.1/ / BPM9-1620L / BPM9-2020L 1.1/ / / BPM9-2420L 1.1/ / / BPM9-2024L 1.1/ / /2 24 BPM9-2424L 1.1/ / / BTM1-2024L 1.1/ / / BTM1-2424L 1.1/ / / BTM1-3232L Rev 4

119 UN O ORIGIN: NORTH AMERIA UNM1 UN O MALE STRAIGHT SEPARATE LAMP REQUIRED UNM9 UN O MALE 90 ELBOW SEPARATE LAMP REQUIRED UN O Thread Nominal ID Dimensions mm Thread E Size Pipe Dash Inch DN A B L S1 UNM1-1212L 3/ / UNM1-1412L 7/ / UNM1-1712L 1.1/ / UNM1-1716L 1.1/ UNM1-2116L 1.5/ UNM1-2120L 1.5/ / UNM1-2620L 1.5/ / UNM1-2624L 1.5/ / UNM1-3024L 1.7/ / L SERIES UN O FITTINGS UN O Thread Nominal ID Dimensions mm Thread E Size Pipe Dash Inch DN A B S1 D UNM9-1212L 3/ / UNM9-1412L 7/ / UNM9-1712L 1.1/ / UNM9-1716L 1.1/ UNM9-2116L 1.5/ UNM9-2120L 1.5/ / UNM9-2620L 1.5/ / UNM9-2624L 1.5/ / Rev 4 119

120 G SERIES JI FITTINGS JI ORIGIN: NORTH AMERIA JF1 JI FEMALE STRAIGHT JI Thread Nominal ID Dimensions (mm / ") T Size Pipe DN Inch Size A B H ES JF1-0806G 1/ / /8" 1/2" 17.5 JF1-0906G 9/ / /16" 9/16" Rev 4

121 SAE ORIGIN: NORTH AMERIA SF1 SAE FEMALE STRAIGHT SF4 SAE FEMALE 45 ELBOW SAE Thread Hose Bore Dimensions (mm / ") Thread Size Tube DN Inch Size A B H ES SF1-1006G 5/ / /4" 9/16" 17.5 G SERIES SAE FITTINGS ES A SAE Thread Hose Bore Dimensions (mm / ") Thread Size Tube DN Inch Size A B D H ES SF4-1006G 5/ / /4" 19 H D B SF9 SAE FEMALE 90 ELBOW B D ES SAE Thread Hose Bore Dimensions (mm / ") Thread Size Tube DN Inch Size A B D H ES SF9-1006G 5/ / /4" 14 A H Rev 4 121

122 S7 SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BF1 BSPP FEMALE STRAIGHT INORPORATES O-RING SEAL BSPP Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A D L K Ø E Synflex Pusher BF1-0202S7 1/ /8 3 1/ P000 FP501 BF1-0403S7 1/ /4 5 3/ B000 FP002 BF1-0404S7 1/ /4 6 1/ B000 FP002 BF1-0606S7 3/ /8 10 3/ B000 FP503 BF1-0808S7 1/ /2 12 1/ B000 FP505 BF1-1212S7 3/ /4 20 3/ B000 FP506 BF1-1616S B000 FP508 Denotes O-Ring Seal not applicable on this fitting ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. BF9 BSPP FEMALE OMPAT 90 ELBOW INORPORATES O-RING SEAL BSPP Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A B D K Ø E Synflex Pusher BF9-0404S7 1/ /4 6 1/ B0B0 P601 BF9-0606S7 3/ /8 10 3/ B0B0 P602 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. 122 Rev 4

123 NPT / NPSM ORIGIN: NORTH AMERIA NF1 NPSM FEMALE STRAIGHT NPSM Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A D L K Ø E Synflex Pusher NF1-0402S7 1/ /4 3 1/ FP024 NF1-0403S7 1/ /4 5 3/ FP002 NF1-0404S7 1/ /4 6 1/ FP002 NF1-0606S7 3/ /8 10 3/ FP004 NF1-0808S7 1/ /2 12 1/ FP018 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. NM1 NPT MALE STRAIGHT S7 SERIES NPT / NPSM FITTINGS NPT Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B ID Synflex Pusher NM1-0202S7 1/ /8 3 1/ MP023 NM1-0203S7 1/ /8 5 3/ MP001 NM1-0603S7 3/ /8 5 3/ MP005 NM1-0204S7 1/ /8 6 1/ MP002 NM1-0403S7 1/ /4 5 3/ MP004 NM1-0404S7 1/ /4 6 1/ MP004 NM1-0604S7 3/ /8 6 1/ MP005 NM1-0405S7 1/ /4 8 5/ MP004 NM1-0406S7 1/ /4 10 3/ MP005 NM1-0606S7 3/ /8 10 3/ MP005 NM1-0806S7 1/ /2 10 3/ MP009 NM1-0808S7 1/ /2 12 1/ MP009 NM1-1212S7 3/ /4 20 3/ MP011 NM1-1616S7 1-11½ MP013 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. Rev 4 123

S7 SERIES NPT FITTINGS NPT / NPSM ORIGIN: NORTH AMERIA NMS1 NPT SWIVEL MALE STRAIGHT NPT Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D ID Synflex Pusher 4599-

124 S7 SERIES NPT FITTINGS NPT / NPSM ORIGIN: NORTH AMERIA NMS1 NPT SWIVEL MALE STRAIGHT NPT Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D ID Synflex Pusher NMS1-0404S7 1/ /4 6 1/ MP003 NMS1-0606S7 3/ /8 10 3/ MP006 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. 124 Rev 4

125 JI ORIGIN: NORTH AMERIA JF1 JI FEMALE STRAIGHT JI / SAE Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D ID Synflex Pusher JF1-0602S7 3/ / FP017 JF1-0702S7 7/ / FP010 JF1-0703S7 7/ / FP011 JF1-0803S7 1/ / FP001 JF1-0704S7 7/ / FP012 JF1-0804S7 1/ / FP013 JF1-0904S7 9/ / FP013 JF1-0805S7 1/ / FP013 JF1-0905S7 9/ / FP013 JF1-0906S7 9/ / FP015 JF1-1206S7 3/ / FP005 JF1-1208S7 3/ / FP016 JF1-1408S7 7/ / FP006 JF1-1712S7 1.1/ / FP008 JF1-2116S7 1.5/ FP009 STAINLESS STEEL FITTINGS JF1SS-0704S7 7/ / A FP012 JF1SS-0906S7 9/ / A FP015 JF1SS-1208S7 3/ / A FP016 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. Please note that the fittings with the and Synflex s shown in Bold Italics have double seats that make them compatible with both JI 37 and SAE 45 male connectors S7 SERIES JI FITTINGS Rev 4 125

126 S7 SERIES JI FITTINGS JI ORIGIN: NORTH AMERIA JM1 JI MALE STRAIGHT JI Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B ID Synflex Pusher JM1-0703S7 7/ / MP001 JM1-0704S7 7/ / MP002 JM1-0904S7 9/ / MP005 JM1-0905S7 9/ / MP004 JM1-0906S7 9/ / MP005 JM1-1206S7 3/ / MP007 JM1-1208S7 3/ / MP008 JM1-1408S7 7/ / MP009 JM1-1712S7 1.1/16" / MP011 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. JF4 JI FEMALE 45 ELBOW JI Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B F D ID Synflex Pusher JF4-0704S7 7/ / TP204 JF4-0804S7 1/ / TP205 JF4-0905S7 9/ / TP206 JF4-0906S7 9/ / TP206 JF4-1206S7 3/ / TP208 JF4-1208S7 3/ / TP308 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. 126 Rev 4

127 JI ORIGIN: NORTH AMERIA JF9 / JF9L JI FEMALE 90 ELBOW INLUDING LONG DROPS JI Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B F D ID Synflex Pusher JF9-0703S7 7/ / S0 TP204 JF9-0704S7 7/ / S0 TP204 JF9-0804S7 1/ / S0 TP205 JF9-0905S7 9/ / S0 TP206 JF9-0906S7 9/ / S0 TP206 JF9-1206S7 3/ / S0 TP208 JF9-1208S7 3/ / S0 TP308 JF9-1408S7 7/ / S0 TP310 JF9-1712S7 1.1/16" / S0 TP312 LONG DROP ELBOWS JFL9-0704S7 7/ / L0 TP204 JFL9-0906S7 9/ / L0 TP206 JFL9-1206S7 3/ / L0 TP208 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. S7 SERIES JI / SAE FITTINGS SF1 SAE FEMALE STRAIGHT SAE Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D ID Synflex Pusher SF1-1005S7 5/ /16" A000 FP003 SF1-1006S7 5/ /8" A000 FP014 SF1-1712S7 1.1/ /4" A000 FP008 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. Rev 4 127

S7 SERIES ORFS FITTINGS ORFS ORIGIN: NORTH AMERIA OF1 ORFS FEMALE STRAIGHT ORFS Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D ID Synflex Pusher 4599- OF1-0404S7

128 S7 SERIES ORFS FITTINGS ORFS ORIGIN: NORTH AMERIA OF1 ORFS FEMALE STRAIGHT ORFS Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D ID Synflex Pusher OF1-0404S7 9/ / MP045 OF1-0606S7 11/ / SP031 OF1-0808S7 13/ / FP040 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. OF9 ORFS FEMALE 90 ELBOW ORFS Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D F ID Synflex Pusher OF9-0404S7 9/ / S0 TP204 OF9-0606S7 11/ / S0 TP206 OF9-0808S7 13/ / S0 TP308 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. 128 Rev 4

129 METRI ORIGIN: GERMANY DLF1 / DSF1 DKL LIGHT / DKS HEAVY FEMALE STRAIGHT Metric Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A D L K Ø E Synflex Pusher DLF1 LIGHT SERIES (DKL) DLF1-1604S7 M16 x L 6 1/ JL00 FP503 DLF1-1605S7 M16 x L 08 5/ JL00 FP503 DLF1-1805S7 M18 x L 08 5/ JL00 FP503 DLF1-1806S7 M18 x L 10 3/ JL00 FP503 DSF1 HEAVY SERIES (DKS) DSF1-2005S7 M20 x S 08 5/ JL00 FP504 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. DSM1 DKS HEAVY MALE STRAIGHT S7 SERIES METRI FITTINGS DKS Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A D L R Ø E Synflex Pusher DSM1 HEAVY SERIES (DKS) DSM1-2005S7 M20 x S 08 5/ SS00 MP505 DSM1-1806S7 M18 x S 10 3/ SL00 MP504 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. INFORMATION: DKL = Dicht Kegel Leicht meaning Sealing one Light (one included angle is 24 ) DKS = Dicht Kegel Schwer meaning Sealing one Heavy (one included angle is 24 ) Rev 4 129

130 S7 SERIES STANDPIPES STANDPIPES ORIGIN: GERMANY SPM1 METRI STANDPIPE STRAIGHT Standpipe Nominal ID Dimensions mm Synflex Data ª R Size Pipe DN Inch Size A D L R Ø E Synflex Pusher SPM1-0603S L/S 05 3/ N000 MP501 SPM1-0804S L/S 06 1/ N000 MP501 SPM1-1004S L/S 06 1/ N000 MP501 SPM1-1005S L/S 08 5/ N000 MP502 SPM1-1006S L/S 10 3/ N000 MP502 SPM1-1205S L/S 08 5/ N000 MP502 SPM1-1206S L/S 10 3/ N000 MP502 SPM1-1508S L 12 1/ N000 MP504 SPM1-1608S S 12 1/ N000 MP504 SPM1-1808S L 16 5/ N000 MP504 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. SPM4 METRI STANDPIPE 45 ELBOW Standpipe Nominal ID Dimensions mm Synflex Data ª R Size Pipe DN Inch Size A B L D R Synflex Pusher SPM4-0603S L/S 05 3/ N040 TP204 SPM4-1004S L/S 06 1/ N040 TP206 SPM4-1005S L/S 08 5/ N040 TP206 SPM4-1205S L/S 08 5/ N040 TP210 SPM4-1206S L/S 10 3/ N040 TP210 SPM4-1808S L 16 5/ N040 TP312 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. 130 Rev 4

131 STANDPIPES ORIGIN: GERMANY SPM9 METRI STANDPIPE 90 ELBOW Standpipe Nominal ID Dimensions mm Synflex Data ª R Size Pipe DN Inch Size A B L D R Synflex Pusher SPM9-0603S L/S 05 3/ N090 TP204 SPM9-0804S L/S 06 1/ N090 TP205 SPM9-1004S L/S 06 1/ N090 TP206 SPM9-1005S L/S 08 5/ N090 TP206 SPM9-1205S L/S 08 5/ N090 TP210 SPM9-1206S L/S 10 3/ N090 TP210 SPM9-1508S L 12 1/ N090 TP310 SPM9-1808S L 16 5/ N090 TP312 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. S7 SERIES STANDPIPES Rev 4 131

132 S8 SERIES BSP FITTINGS BSP ORIGIN: GREAT BRITAIN BF1 BSPP FEMALE STRAIGHT INORPORATES O-RING SEAL BSPP Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A D L K Ø E Synflex Pusher BF1-0404S8 1/ /4 6 1/ H04-04B000 FP002 BF1-0606S8 3/ /8 10 3/ H06-06B000 FP503 BF1-0808S8 1/ /2 12 1/ H08-08B000 FP505 BF1-1212S8 3/ /4 20 3/ H12-12B000 FP506 BF1-1616S H16-16B000 FP508 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. BF9 BSPP FEMALE OMPAT 90 ELBOW INORPORATES O-RING SEAL BSPP Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A B D K Ø E Synflex Pusher BF9-0606S8 3/ /8 10 3/ H06-06B0B0 P602 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. 132 Rev 4

133 NPT / NPSM ORIGIN: NORTH AMERIA NF1 NPSM FEMALE STRAIGHT NPSM Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A D L K Ø E Synflex Pusher NF1-0404S8 1/ /4 6 1/ H FP002 NF1-0606S8 3/ /8 10 3/ H FP004 NF1-0808S8 1/ /2 12 1/ H FP018 NF1-1616S8 1-11½ H FP009 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. NM1 NPT MALE STRAIGHT S8 SERIES NPT / NPSM FITTINGS NPT Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B ID Synflex Pusher NM1-0403S8 1/ /4 5 3/ H MP004 NM1-0606S8 3/ /8 10 3/ H MP005 NM1-0608S8 3/ /8 12 1/ H MP008 NM1-0808S8 1/ /2 12 1/ H MP009 NM1-1212S8 3/ /4 20 3/ H MP011 NM1-1616S8 1-11½ H MP013 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. Rev 4 133

134 S8 SERIES JI FITTINGS JI ORIGIN: NORTH AMERIA JF1 JI FEMALE STRAIGHT JI Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D ID Synflex Pusher JF1-0703S8 7/ / H FP011 JF1-0704S8 7/ / H FP012 JF1-0904S8 9/ / H FP013 JF1-0906S8 9/ / H FP015 JF1-1206S8 3/ / H FP005 JF1-1208S8 3/ / H FP016 JF1-1408S8 7/ / H FP006 JF1-1710S8 1.1/ / H FP008 JF1-1712S8 1.1/ / H FP008 JF1-2116S8 1.5/ H FP009 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. JM1 JI MALE STRAIGHT JI Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B ID Synflex Pusher JM1-0906S8 9/ / H MP005 JM1-1206S8 3/ / H MP007 JM1-1208S8 3/ / H MP008 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. 134 Rev 4

135 JI ORIGIN: NORTH AMERIA JF9 JI FEMALE 90 ELBOW JI Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B F D ID Synflex Pusher JF9-0704S8 7/ / H S0 TP204 JF9-1206S8 3/ / H S0 TP208 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. S8 SERIES JI FITTINGS Rev 4 135

136 S8 SERIES SAE FITTINGS SAE ORIGIN: NORTH AMERIA SF1 SAE FEMALE STRAIGHT JI Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D ID Synflex Pusher SF1-1006S8 5/ / H06-06A000 FP014 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. 136 Rev 4

137 METRI ORIGIN: GERMANY DLF1 DKL LIGHT FEMALE STRAIGHT Metric Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A D L K Ø E Synflex Pusher DLF1-1806S8 M18 x L 10 3/ H06-18JL00 FP503 DLF1-2208S8 M22 x L 12 1/ H08-22JL00 FP505 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. DLM1 DKL LIGHT MALE STRAIGHT S8 SERIES METRI FITTINGS DKS Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A D L R Ø E Synflex Pusher DLM1-2206S8 M22 x L 10 3/ H06-22SL00 MP506 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. Rev 4 137

138 S8 SERIES METRI FITTINGS METRI ORIGIN: GERMANY DSF1 DKS HEAVY FEMALE STRAIGHT Metric Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A D L K Ø E Synflex Pusher DSF1-2006S8 M20 x S 10 3/ H06-20JS00 FP504 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. DSM1 DKS HEAVY MALE STRAIGHT DKS Thread Nominal ID Dimensions mm Synflex Data ª G Size Pipe DN Inch Size A D L R Ø E Synflex Pusher DSM1-2006S8 M20 x S 10 3/ H06-20SS00 MP505 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. 138 Rev 4

139 STANDPIPES ORIGIN: GERMANY SPM1 METRI STANDPIPE STRAIGHT Standpipe Nominal ID Dimensions mm Synflex Data ª R Size Pipe DN Inch Size A D L R Ø E Synflex Pusher SPM1-1004S L/S 06 1/ H04-10N000 MP501 SPM1-1206S L/S 10 3/ H06-12N000 MP502 SPM1-1508S L 12 1/ H08-15N000 MP504 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. SPM4 METRI STANDPIPE 45 ELBOW S8 SERIES STANDPIPES Standpipe Nominal ID Dimensions mm Synflex Data ª R Size Pipe DN Inch Size A B L D R Synflex Pusher SPM4-1004S L/S 06 1/ H04-10N040 TP206 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. SPM9 METRI STANDPIPE 90 ELBOW Standpipe Nominal ID Dimensions mm Synflex Data ª R Size Pipe DN Inch Size A B L D R Synflex Pusher SPM9-1004S L/S 06 1/ H04-10N090 TP206 SPM9-1206S L/S 10 3/ H06-12N090 TP210 SPM9-1508S L 12 1/ H08-15N090 TP310 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. Rev 4 139

140 S18 SERIES JI FITTINGS JI ORIGIN: NORTH AMERIA JF1 JI FEMALE STRAIGHT JI Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D ID Synflex Pusher JF1-1410S18 7/ / N FP021 JF1-1710S18 1.1/ / N FP008 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. 140 Rev 4

FITTINGS TO SUIT 3VEO ASSEMBLY BY AREDITED PERSONS JF1 JI FEMALE STRAIGHT All SV Series fittings must be assembled only by accredited personnel JI Thread Nominal ID Dimensions mm Synflex Data ª

8 90V06-065500 FP015 STAINLESS STEEL FITTINGS JF1SS-0704SV 7/16-20 07 04 6 1/4 04 64.3 36.5 15.9 15.9 3.6 9V04-045400 FP012 JF1SS-0906SV 9/16-18 09 06 10 3/8 06 74.2 41.3 19.1 19.1 6.

141 FITTINGS TO SUIT 3VEO ASSEMBLY BY AREDITED PERSONS JF1 JI FEMALE STRAIGHT All SV Series fittings must be assembled only by accredited personnel JI Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B D ID Synflex Pusher JF1-0704SV 7/ / V FP012 JF1-0906SV 9/ / V FP015 STAINLESS STEEL FITTINGS JF1SS-0704SV 7/ / V FP012 JF1SS-0906SV 9/ / DV FP015 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. SV SERIES JI / NPT FITTINGS NM1 NPT MALE STRAIGHT NPT Thread Nominal ID Dimensions mm Synflex Data ª Thread Size Pipe DN Inch Size A B ID Synflex Pusher NM1-0404SV 1/ /4 6 1/ V MP004 NM1-0406SV 1/ /4 10 3/ V MP005 NM1-0604SV 3/ /8 6 1/ V MP005 NM1-0606SV 3/ /8 10 3/ V MP005 STAINLESS STEEL FITTINGS NM1SS-0606SV 3/ /8 10 3/ V MP005 ª The requisite Synflex Die is dependent on which hose is used. Refer to atalogue Section B Thermoplastic Hoses for the appropriate Synflex Die No. Stainless Steel fittings are Grade 316 Rev 4 141

HOW TO SPECIFY PIRTEK HOSE TAILS

HOW TO SPECIFY PIRTEK HOSE TAILS Hose Tail Part Number C629L-2016X Tail Series / Dash Size stamped on 1-piece crimp fittings Configuration Angle Type - Fitting Size Hose Size Series C62 9 L - 20 16 X End