HOSES HOSES INFORMATION GENERAL. GS Hose Components, medium press Working pressure, Type Approvals 345 High Pressure Hoses: P1T, EN 853/G1

Transcription

1 GENERAL HYDRAULIC PIPES AR SAE 50 AR SAE 3000 PSI DIN AR SCHEDULE SERIE SAE 3000 PSI Product Page Working pressure, Type Approvals 345 High Pressure s: P1T, EN 853/G1 348 C1TH, EN 853/G2 349 CM2T / EN 857, SAE 100 R PW Powerwash, 2PW Powerwash 351 SAE 100 R12, GH506/4SH 352 SAE 100 R17, SAE 100 R M5K, M6K 354 G3K, G4K 355 G5K 356 G6K 357 SAE100 R7, SAE 100 R7 - twin hose 358 SAE100 R8, SAE100 R8 - twin hose 359 Non-Conductive, T9 Teflon hose 360 Special s: Powerbraid, Protectors Low Pressure s: GP 40, GP GP 80, ACR Megatech 363 Megavac, Adapta Flex/AF 364 Premo Flex, 6005 Oil hose 365 GS Assembly, high pressure 366 GS Components, high pressure 367 GS Assembly, medium pressure 368 Product Page GS Components, medium press. 369 GS Assembly, low pressure 370 GS Components, low pressure 371 P-Serie Couplings: Ferrules 372 Choise of Ferrule 373 P-Serie Couplings: SP Threads 60 Cone, SP / NPT 374 JIC 74 Cone, DKOL / SKL Metric 375 DKOS / SKS Metric, 3000/6000 psi SAE 376 JIS - Komatsu - anjo - Kobelco ORFS / SAE Flat Face O-ring 377 I-Serie Interlock Couplings: SAE 3000 / 6000 psi with O-ring 378 Ferrules, JIC Couplings, DKOS / SKS 379 G-Serie One Piece Couplings: Choise of Couplings 380 SP Threads 60 Cone, SP / NPT 381 JIC 74 Cone, DKOL / SKL Metric 382 DKOS / SKS Metric, 3000/6000 psi SAE 383 Powerwash 384 GS-Serie Couplings: Ferrules, Inserts SP 60 Cone 385 UNF JIC 74 Seat, DKOS / SKS Metric 386 SAE 3000 / 6000 psi with O-ring 387 CAT Style O-ring Flange 388 ORFS/SAE Flat Face, Komatsu Style 389 SCHEDULE SERIE SAE 6000 PSI SCHEDULE SERIE DIN AR

2 General Information GS-FLANGE GS-Hydro supplies comprehensive selection of hoses and hose couplings which include SP, NPT, JIC, Metric, SAE 3000/6000 Flanges and GS Retain Ring Flanges to various applications. GS-Hydro hoses can meet several industry standards and type approvals of main certificate institutes. Please specify your requirements when ordering. TUES & PIPES CLAMPS Working Pressures / High Pressure s type In order to guarantee peak performance of the hose, you should select the type of the hose according to specific conditions under which it is to be used. Therefore it is essential to obtain precise information about the application and required connections. Make sure that all requirements of the application are fulfilled. The system pressure should not exceed published working pressures. Approved working pressures are indicated in the enclosed table. dimension 3/16 1/4 5/16 3/8 1/2 5/8 3/ /4 1 1/2 2 P1T G1 /1SN C1TH / G1H G2 / 2SN CM2T G2L PW / 2PW SH / GH M3K M4K M5K M6K 420 G3K G4K G5K G6K R R A T9 / PTFE MACHINES ADAPTORS VALVES ITE TYPE SPECIAL Above pressures = Approved working pressures. urst pressure = 4 x working pressure

3 GS-FLANGE General Information TUES & PIPES CLAMPS VALVES ITE TYPE approvals type DNV GL LR MOD AS MED DIN DNV = Det Norske Veritas Classification EFG6K X X X O X X GL = Germanischer Lloyds EFG5K/G5K X X X O X EFG4K X X X O X LR = Lloyds`Register of Shipping EFG3K/G3K O O O O X MOD = Military of Defence M6K X X X O M5K X X X X AS = American ureau of Shipping M4K X X X X X MED = Marine Equipment Directive M3K X X X X X X CM2T X X X X G2 X X X X G1 X X X X GMV X X X=approved O=test prograe ongoing Order Example G G2 G L=... Coupling Type Type Coupling Type Assembly Length 346 A Assembly length (cone to cone) Cut hose length A ADAPTORS SPECIAL MACHINES For some assemblies the length must be within a light tolerance for proper installation. This is especially true for short assemblies on high pressure applications. efore cutting the hose, make sure you understand the difference between cut hose lenght and assembly overall length as shown above. Cut-off value A is the length of that part of the coupling not directly in contact with or applied to the hose. Substract the sum of the two A values from the total length of the assembly to compute the approximate hose length to be cut. For male thread couplings, the cut-off is measured from locking collar to the end of the threads. For straight female couplings, the cut-off is measured from the locking collar to either the end of the nut or seat depending on whether the nut can be pulled back exposing the seating surface. The cut-off for bend tube couplings is measured from the locking collar to the centre line of the surface.

4 Assembly and Installation GS-FLANGE Assembly Routing Tips CLAMPS TUES & PIPES When hose installation is straight, allow enough slack in hose line to provide for length changes which will occur when pressure is applied. When radius is below the required minimum, use an angle adaptor to avoid sharp bends. Prevent twisting and distortion by bending hose in same plane as the motion of the boss to which hose is connected. Avoid twisting of hose lines bent in two planes by clamping hose at change of plane. 347 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL User proper angle adaptors to avoid sharp twist or bend in hose. Adequate hose length is necessary to distribute movement on flexing applications and to avoid abrasion.

5 GS-FLANGE High Pressure TUES & PIPES CLAMPS VALVES ITE TYPE ADAPTORS SPECIAL MACHINES 348 SPECIFICATION: Recoended: Pilot control systems Also suitable as washer hose Construction: NR tube CR cover 1 wire reinforced Temperature: -40 C C. Approvals: See page no 361 Couplings: P-Serie Pilot Pilot Control ID Code bore Min. burst Max. working Min. bend Weight pressure pressure radius kgs. inch P1T-04 1/4 6 10, P1T-05 5/ , P1T-06 3/ , SPECIFICATION: Recoended: Hydraulic systems, lubr. oils. Construction: NR tube 1 wire reinforced NR/PVC cover. Temperature: -40 C C. Intermittent C. Approvals: See page no 361 Couplings: P-Serie and G-Serie SAE 100 R1 S/EN 853 1SN G1 ISO wire non skive bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch G1-04 1/4 6 13, G1-05 5/ , G1-06 3/ , G1-08 1/ , G1-10 5/ , G1-12 3/ , G , G / , G / , G ,

6 High Pressure GS-FLANGE SAE 100 R1 ISO 1436 High Temperature SPECIFICATION: Recoended: Medium pressure and hightemperature hose lines. Construction: NR tube 1 wire braid reinforcement CSM (Hypalon) cover. Temperature: -40 C C. Intermittent C. Approvals: See page no 361 TUES & PIPES CLAMPS 349 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL Couplings: P-Serie and G-Serie bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch C1TH-04 1/4 6 13, C1TH-05 5/ , C1TH-06 3/ , C1TH-08 1/ , C1TH-10 5/ , C1TH-12 3/ , C1TH , C1TH / , C1TH / , SAE 100 R2 S/EN 853 2SN G2 SPECIFICATION: Recoended: High pressure hydraulic oil lines. Construction: NR tube 2 wire braid reinforcement. NR/PVC cover Temperature: -40 C C. Intermittent C. Approvals: See page no 361 Couplings: P-Serie, G-Serie bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch G2-04 1/4 6 15, G2-05 5/ , G2-06 3/ , G2-08 1/ , G2-10 5/ , G2-12 3/ , G , G / , G / , G ,

7 GS-FLANGE High Pressure TUES & PIPES CLAMPS VALVES ITE TYPE SPECIFICATION: Recoended: High pressure hydraulic oil lines. Construction: NR tube 2 wire braid reinforcement. CR cover Temperature: -40 C C. Intermittent C. Approvals: See page no 361 Couplings: P-Serie, G-Serie EN 857/2SC ISO 1436 Compact hose. Very tight bend radius bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch CM2T-04 1/4 6 14, CM2T-05 5/ , CM2T-06 3/ , ,5 42 CM2T-08 1/ , CM2T-10 5/ , CM2T-12 3/ , CM2T , Twin CM2T-06TW 3/ CM2T-08TW 1/ ADAPTORS SPECIAL MACHINES 350 SPECIFICATION: Recoended: High pressure hydraulic applications at extremely low temperature. Construction: NR tube 2 wire braid reinforcement. CR cover Temperature: -57 C C. Intermittent C. Couplings: P-Serie, G-Serie O.D SAE 100 R2 S/EN 853 2SN Low Temperature hose Min. burst pressure Max. working pressure Min. bend radius Weight kgs. bore ID Code inch G2L-04 1/4 6 14, G2L-06 3/ , G2L-08 1/ , G2L-10 5/ , G2L-12 3/ , G2L , G2L / ,

8 High Pressure GS-FLANGE 1PW Powerwash 200 ar 1 wire Non-skive LUE COVER 351 TUES & PIPES CLAMPS MACHINES ADAPTORS VALVES ITE TYPE SPECIAL ID Code bore O.D SPECIFICATION: Recoended:Use on hot and cold water high-pressure cleaning equipment where heavy-duty service is required. Suited for agricultural, sports, valet and maintenance applications. lue PowerWash is suitable for use in hospitals, swiing pools and other applications where hygiene is often utmost important. Construction: NR tube lue NR/PVC cover 1 wire braid reinforcement Temperature: -40 C C. Couplings: P-Serie, G-Serie Min. burst pressure Max. working pressure Min. bend radius inch 1PW / , PW / , PW / , PW Powerwash 400 ar 2 wire Non- skive LUE COVER Weight kgs. SPECIFICATION: Recoended:Use on hot and cold water high-pressure cleaning equipment where heavy-duty service is required. Suited for agricultural, sports, valet and maintenance applications. lue PowerWash is suitable for use in hospitals, swiing pools and other applications where hygiene is often utmost importance. Construction: NR tube lue NR/PVC cover 2 wire braid reinforcement Temperature: -40 C C. Couplings: P-Serie, G-Serie bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch 2PW / , PW / , PW / ,

9 GS-FLANGE High Pressure TUES & PIPES CLAMPS VALVES ITE TYPE SPECIFICATION: Recoended: Very high pressure applications. - for high pressure peaks Construction: NR tube, CR cover Four alternating layers of spiralled high tensile steel wire over fabric layer. Temperature: -40 C C. Intermittent C. Approvals: See page no 361 Couplings: P-Serie, G-Serie SAE 100 R12/EN 856 R12 bore O.D Min. burst Max. working Min. bend Weight ID Code pressure pressure radius kgs. inch DN inc PSI MPa PSI MPa 6EFG4K 3/ EFG4K 1/ EFG4K 5/ EFG4K 3/ EFG4K EFG4K 1.1/ ADAPTORS SPECIAL MACHINES 352 SPECIFICATION: Recoended: Very high pressure applications. - for high pressure peaks Construction: NR tube and CR cover Four alternating layers of spiralled high tensile steel wire over fabric layer. Temperature: -40 C C. Intermittent C. Approvals: See page no 361 Couplings: I-Serie GH506/4SH bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch / , , / , / , ,

10 High Pressure GS-FLANGE 353 TUES & PIPES CLAMPS MACHINES ADAPTORS VALVES ITE TYPE SPECIAL SAE 100 R17/EN 1SC/2SC SPECIFICATION: Recoended: High pressure hydraulic applications Tube: NR (Nitrile). Reinforcement: : one braid of steel wire : two braids of steel wire Cover: NR / PVC. MSHA approval Temp. range: -40 C to +100 C constant C intermittent. Couplings: P-Serie, G-Serie Approvals: See page no 361 bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch M3K-04 1/4 6 12, M3K-05 5/ , M3K-06 3/ , M3K-08 1/ , M3K-10 5/ , M3K-12 3/ , M3K ,4 37, EN 857/2SC SAE 100 R 19 SPECIFICATION: Recoended: High pressure hydraulic applications Tube: NR (Nitrile). Reinforcement: Two braids of high tensile steel wire Cover: NR / PVC. MSHA approval Temp. range: -40 C to +100 C constant C intermittent. Couplings: P-Serie, G-Serie Approvals: See page no 361 bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch M4K-04 1/4 6 13, M4K-05 5/ , M4K-06 3/ , M4K-08 1/ , M4K-10 5/ , M4K-12 3/ ,

11 GS-FLANGE High Pressure TUES & PIPES CLAMPS VALVES ITE TYPE SPECIFICATION: Recoended: High pressure hydraulic applications Tube: NR (Nitrile). Reinforcement: Two braids of high tensile steel wire. Cover: NR / PVC. MSHA approval Temp. range: -40 C to +100 C constant C intermittent. Couplings: P-Serie, G-Serie Approvals: See page no 361 EN 857 SC bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch M5K-04 1/4 6 13, M5K-05 5/ , M5K-06 3/ , M5K-08 1/ , ADAPTORS SPECIAL 354 SPECIFICATION: Recoended: High pressure hydraulic applications Tube: NR (Nitrile). Reinforcement: Two braids of high tensile steel wire. Cover: NR / PVC. MSHA approval Temp. range: -40 C to +100 C constant C intermittent. Couplings: P-Serie, G-Serie Approvals: See page no 361 EN 857/2SC MACHINES bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch M6K /4 6 15,

12 High Pressure GS-FLANGE SAE 100 R12/4SP 355 TUES & PIPES CLAMPS MACHINES ADAPTORS VALVES ITE TYPE SPECIAL SPECIFICATION: Recoended: Extreme high pressure and high impulse hydr. applications Tube: CR (Cloroprebe) Reinforcement: Four alternating layers of spiralled, high tensile steel wire. Cover: CR (Cloroprene). MSHA Approval Temp. range: -40 C to +121 C Couplings: P-Serie, GS-Serie Approvals: See page no 361 bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch G3K / , G3K / , G3K , SAE 100 R12/4SP Recoended for: Tube: Reinforcement: Cover: Extremely high pressure and high impulse hydraulic applications. NR (Nitrile). Four alternating layers of spiralled, high tensile steel wire. CR (Chloroprene). MSHA Approval. Temperature range: -40 C to +121 C. For water emulsions, etc. see page Couplings: GS-Serie, P-Serie Approvals: See page no 361 Characteristics and benefits: Extremely flexible. Superior flex impulse performance: tested to impulse cycles at 50% of EN 856 R12 and SAE 100R12 bend radii. 50% of EN 856 4SP bend radius. bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch G4K-10 5/ , G4K-12 3/ , G4K , G4K / ,

13 GS-FLANGE High Pressure TUES & PIPES CLAMPS VALVES ITE TYPE Recoended for: Extremely high pressure and high impulse hydraulic applications. Tube: NR: CR (Cloroprene). Reinforcement: Four alternating layers of spiralled, high tensile steel wire : six layers. Cover: CR (Chloroprene). MSHA Approval. Temperature range: -40 C to +121 C. Couplings: GS-Serie, I-Serie Approvals: See page no 361 Characteristics and benefits: Extremely flexible. Superior flex impulse performance: tested to impulse cycles at 80% of EN 856 4SP/4SH bend radius at rated working pressure. SAE 100 R13/4SH/4SP 356 ADAPTORS SPECIAL MACHINES bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch G5K-08 1/ , G5K-10 5/ , G5K-12 3/ , G5K , G5K / , G5K / , G5K ,

14 High Pressure GS-FLANGE TUES & PIPES 357 CLAMPS MACHINES ADAPTORS VALVES ITE TYPE SPECIAL SAE 100 R15/4SH/4SP Recoended for: Tube: Reinforcement: Cover: Extremely high pressure and high impulse applications such as hydrostatic transmissions, etc. NR: CR: (Cloroprene) MSHA Approval. Four (six for -20) alternating layers of spiralled, high tensile steel wire. CR (Chloroprene). MSHA approval. Temperature range: -40 C to +121 C. For water emulsions, etc. see page Standards: Couplings: GS-Serie, I-Serie Approvals: See page no 361 Characteristics and benefits: Extremely flexible. Superior flex impulse performance: tested to impulse cycles at reduced bend radii. 80% of EN 856 4SP/4SH bend radius at rated working pressure. NOTE: G4K-, G5K- and G6K-hoses can be supplied with a special CR tube and cover to withstand 300x the abrasion of a standard hose. This hose is suitable in reverse bending applications or for constant bending at minimum bend radius. G4K-, G5K- and G6K-hoses can be supplied for applications where biodegradable hydraulic fluids like syntethic esters, polyglycols and vegetable oils are used. Ask GS-Hydro for more details. bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch G6K / , G6K / , G6K / , G6K / , G6K , G6K / , G6K / , G6K ,

15 GS-FLANGE High Pressure TUES & PIPES CLAMPS VALVES ITE TYPE SPECIFICATION: Recoended: Air,water and hydraulic oil lines. Very flexible. Construction: Polymer tube, polyester reinforcement. Polymer cover. Temperature: Approvals: Couplings: -40 C C. P-serie, G-Serie 1P - SAE100 R7 Thermoplast bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch R7-04 1/4 6,4 12, ,5 R7-05 5/16 8,0 14, ,0 R7-06 3/8 9,6 16, ,5 R7-08 1/2 12,7 20, ,0 R7-10 5/8 15,9 23, R7-12 3/4 19,0 26, ,0 R ,0 32, ,0 ADAPTORS SPECIAL 358 SPECIFICATION: Recoended: Air,water and hydraulic oil lines. Very flexible. Construction: Polymer tube, polyester reinforcement. Polymer cover. Temperature: Approvals: Couplings: -40 C C. P-serie, G-Serie 1PTW - SAE100 R7 Twin hose Thermoplast MACHINES bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch R7-04TW 1/4 6,50 24, ,5 R7-06TW 3/8 9,50 32, ,0 R7-08TW 1/ , ,0

16 High Pressure GS-FLANGE 1A - SAE100 R8 Thermoplast SPECIFICATION: Recoended: Air,water and hydraulic oil lines. Very flexible. Construction: Polymer tube, Kevlar reinforcement. Polymer cover. TUES & PIPES CLAMPS Temperature: Approvals: Couplings: -40 C C. P-Serie, G-Serie bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch R8-04 1/4 6,5 12, ,5 R8-06 3/8 9,5 16, ,5 R8-08 1/ , ,0 R8-10 5/ , R8-12 3/ , ,0 R , ,0 1ATW - SAE100 R8 Twin hose Thermoplast SPECIFICATION: Recoended: Air,water and hydraulic oil lines. Very flexible. Construction: Polymer tube, Kevlar reinforcement. Polymer cover. 359 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL Temperature: Approvals: Couplings: -40 C C. P-Serie, G-Serie bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch R8-04TW 1/4 6,50 25, ,5 R8-06TW 3/8 9,50 34, ,0 R8-08TW 1/ , ,0

17 GS-FLANGE High Pressure TUES & PIPES CLAMPS VALVES ITE TYPE SPECIFICATION: Recoended: Hydraulic and lubricating oil lines - non conductive. Construction: Hytrel / Polymer tube, with Kevlar reinforcement, fire resistant Polymer cover with Kevlar reinforcement. Cover: Orange polyurethan. Temperature: -40 C C. Approvals: Couplings: 1-4 wire swaged couplings Ferrule: 394 Non-Conductive bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch /4 6,4 12, , /8 9,5 16, , /2 12,7 20, , /8 16,0 24, /4 19,1 27, , ,1 34, ,0 360 SPECIFICATION: Recoended Aggresive fluids and high temperature applications. T9 Teflon hose ADAPTORS SPECIAL MACHINES Construction: Temperature: Approvals: Couplings: PTFE tube, stainless steel braid -60 C C. P-Serie, G-Serie bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch T9-04 1/4 6, ,7 T9-06 3/8 9, ,0 T9-08 1/2 12, ,0 T9-12 3/4 19, ,0 T , ,0

18 Special s, Protectors, Protectors GS-FLANGE TUES & PIPES Powerbraid SPECIFICATION: Recoended: Hydraulic oil lines, and seismic applications. Construction: Neoprene tube. Reinforced with 4 layers of high tensile steel wires. Neoprene cover. Temperature: -40 C C Couplings: Powerbraid couplings. 361 CLAMPS MACHINES ADAPTORS VALVES ITE TYPE SPECIAL Lengths: 60`maximum. bore Test Max. working Min. bend Weight ID Code O.D pressure pressure radius kgs. inch / , , HEAT Protector Sleeve Dim. Inch Dim.. Silco /2 13 Silco /8 16 Silco /4 19 Silco Silco /4 32 Silco /8 34 Silco /8 41,5 Silco /4 57 Silco /2 63,5 Silco Silco /2 89 Silco Silco /2 115 Silco Other dimensions on request. Protector PVC - spiral I.D Tape for Assembling TAPE Dimension HEAT PROTECTOR FOR, CALES, Etc. Material: raided fiberglass Outside: Heat resistant silicone rubber Temperature: Max 800 C - 30 minutes. Protects continously to 500 F Protector Dimension Length Min. Max meter meter meter meter meter meter meter Protector Steel dia / / / /

19 GS-FLANGE Low Pressure TUES & PIPES CLAMPS VALVES ITE TYPE SPECIFICATION: Recoended: General air service up to + 80 C and general water service up to C applications requiring maximum flexibility and high abrasion resistance. Resistance to ozone and weather influences. Construction: EPDM Tube (Type P - black). One or two textile reinforced. EPDM Cover (Type P - black) Temperature: -40 C C. Intermittent C. Couplings: G-Serie GP 40 MULTIPURPOSE HOSE (Air and Water) bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius /hg kgs. inch GP / GP / GP / GP / , GP / GP / GP GP / GP / ADAPTORS SPECIAL MACHINES 362 SPECIFICATION: Recoended: Hot water wash down applications up to C, and general industrial applications such as oil and hydraulic fluids (+100 C), alcohols and aqueous solutions. Construction: NR One fibre braid reinforcement. NR Cover Temperature: -40 C C. Couplings: G-Serie GP 60 MULTIPURPOSE HOSE (Hot water - hydr. applications) bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius /hg kgs. inch GP /4 6,5 12, GP /16 8, GP /8 9, GP /2 13,2 20, GP /8 16, GP /4 19, GP ,

20 Low Pressure GS-FLANGE GP 80 MULTIPURPOSE HOSE SPECIFICATION: Recoended: General industrial applications such as oil, alcohols, aqueous solutions, hydraulic fluids, acids, detergents and chemicals. Static conductive for more security. Construction: NR Tube One or two fibre reinforced. NR Cover Temperature: -40 C C. TUES & PIPES CLAMPS 363 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius /hg kgs. inch GP /4 6,5 12, GP /16 8,2 15, GP /8 9,9 17, GP /2 13,2 20, GP /8 16,0 24, GP /4 19,0 29, GP ,8 35, GP /4 32,0 42, GP /2 38,0 51, GP ,0 64, ACR Megatech MEDIUM PRESSURE Couplings: G-Serie SPECIFICATION: Recoended: Pressurised hot oil return lines and air compressor lines, power steering, tilt cab cylinders engine and transmission coolant and filtration lines. Construction: CPE Tube (Chlorinated Polyethylene). One braid of high tensile steel wire. Tube - Oil resistant textile braid with synthetic rubber. MSHA approval. Temperature: -40 C C. for oil, -40 C C. for air and water. -40 C C. for phosphatester Couplings: G-Serie, GL-Serie enefits: Very good resistance to weathering and ozone bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius /hg kgs. inch ACR ACR / , ACR , ACR / , ACR ,

21 GS-FLANGE Low Pressure TUES & PIPES CLAMPS VALVES ITE TYPE SPECIFICATION: Recoended: Petroleum and waterbas hydraulic fluids in suction lines or in low pressure return lines. Construction: NR Tube Reinforcement: fibre braid with helical spiral wire spiralled fibre with helical spiral wire. CR (Chloroprene) Cover Temperature: -40 C C constant. -40 C C intermittent. Standards: SAE 100R4 Couplings: G-Serie, GL-Serie enefits: Half the bend radius of SAE 100 R4 Flexible and lightweight MEGAVAC SAE 100R4 bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius /hg kgs. inch MEGA-12 3/4 19, MEGA ,8 36, MEGA / , MEGA / , MEGA , MEGA / , MEGA / , MEGA , MEGA / , MEGA , ADAPTORS SPECIAL MACHINES 364 SPECIFICATION: Recoended: Air and water applications requiring maximum flexibility. Good resistance to animal fat and vegetable oils. Construction: EPDM Tube Syntetic high tensile cords. EPDM lack. All sizes through 1/2 are perforated. Temperature: -40 C C. Intermittent 110 C Couplings: G-Serie Adapta Flex / AF MULTIPURPOSE HOSE bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius /hg kgs. inch AF-04 1/4 6 11, AF-06 3/ , AF-08 1/ , AF-10 5/ , AF-12 3/ , AF , AF / , AF / ,

22 Low Pressure GS-FLANGE Premo Flex / PF MULTIPURPOSE HOSE SPECIFICATION: Recoended: Applications requiring a premium grade spiral hose with excellent flexibility and maximum resistance to air, water, petroleum oils, gasoline, kerosene and fuel oils (to + 48 C) and lubrication oils (to C) Construction: NR Tube. Syntetic high tensile cords. Modified red nitrile Cover Temperature: -40 C C. Couplings: G-Serie enefits: Non conductive at 1000volts DC. Meets electrical resistance of one megaohm per inch when subjected to 1000 volts DC. Storage and use may adversely affect electrical properties.t bore Min. burst Max. working Min. bend Weight ID Code O.D pressure pressure radius /hg kgs. inch PF-04 1/4 6 12, PF-06 3/ , PF-08 1/ , PF-10 5/ , PF-12 3/ , PF , PF / , PF / , Oil hose 365 TUES & PIPES CLAMPS MACHINES ADAPTORS VALVES ITE TYPE SPECIAL ID Code I.D. O.D. W.P SPECIFICATION: Recoended: Transport of hydraulic and fuel oils. Construction: Nitrile tube textile reinforcement Neoprene cover. Temperature: -40 C C Lengths: 40 m. Other lengths on request. urst pressure end radius Weight kg/m / , , / , , / , , , , ,2

23 GS-FLANGE GS Assembly, High Pressure TUES & PIPES CLAMPS VALVES ITE TYPE L L L L L assembly for GH 506 -hose and GS-SAE high 047 pressure flanges. L 366 ADAPTORS SPECIAL SAE 3000 psi Flanges Size Working Pressure for hose assembly (bar) urst Pressure for hoses (bar) ending Radius 3/ / / SAE 6000 psi Flanges Size Working Pressure for hose assembly (bar) urst Pressure for hoses (bar) ending Radius MACHINES 3/ / / Part number does not include bolts When higher working pressure are requested, contact to GS-Hydro for more detailed information.

24 GS Insert and Ferrule, High Pressure CLAMPS GS-FLANGE TUES & PIPES Insert straight Size ID Code N E1 3/ / / Component material: St 52 Other materials by request Insert 45 Size ID Code N H 3/ / / Insert 90 Size ID Code N H 3/ / / Component material: St 52 Other materials by request Ferrule Size ID Code D 3/4 GH GH /4 GH /2 GH MACHINES ADAPTORS VALVES ITE TYPE SPECIAL GH Component material: St 52 Other materials by request Component material: St 52 Other materials by request

25 GS-FLANGE GS Assembly, Medium Pressure TUES & PIPES CLAMPS VALVES ITE TYPE L L L L L assembly for R1T- and R2T-hoses and GS-SAE high 047 pressure flanges. L ADAPTORS SPECIAL MACHINES 368 SAE 3000 psi Flanges Working Pressure (bar) Size ending Radius SAE 100 R1T SAE 100 R2T 3/4 M M M M /4 M M /2 M M M M SAE 6000 psi Flanges Working Pressure (bar) Size ending Radius SAE 100 R1T SAE 100 R2T 3/4 M M M M /4 M M /2 M M M M Part number does not include bolts

26 GS Insert and Ferrule, Medium Pressure GS-FLANGE Insert straight Size ID Code N E1 (hose I.D.) 3/4 M M /4 M /2 M M Component material: St 52 Other materials by request TUES & PIPES CLAMPS Insert 90 Size ID Code N H 3/4 M M /4 M /2 M M Component material: St 52 Other materials by request Size ID Code N H 3/4 M M /4 M /2 M M Component material: St 52 Other materials by request Tightener Insert 45 Size ID Code 3/4 GH2R MFRx 1 GH2R MFRx 1 1/4 GH2R MFRx 1 1/2 GH2R MFRx 2 GH2R MFRx Component material: St 52 Other materials by request x = used hose type Tightener and Ferrule Ferrule 369 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL

27 GS-FLANGE GS Assembly, Low Pressure TUES & PIPES CLAMPS VALVES ITE TYPE L L L L 046 L L ADAPTORS SPECIAL MACHINES Size Working Pressure (bar) ending Radius 1 1/ / / Part number does not include bolts

28 GS Insert and Ferrule, Low Pressure GS-FLANGE Insert straight Size ID Code L E1 (hose I.D.) 1 1/2 L /2 2 L /2½ 2 1/2 L /3 3 L /3¼ 3 1/2 L /4 4 L /4½ 5 L /5 6 L /6 8 L /8 Insert 90 Size ID Code L H 1 1/2 L L /2 L L /2 L L L L L Insert 45 Size ID Code L H 1 1/2 L L /2 L L /2 L L L L L Tightener and Ferrule Tightener Ferrule Size ID Code ID Code 1 1/2 GH2R FL GH2R FL /2 GH2R FL GH2R FL /2 GH2R FL GH2R FL GH2R FL GH2R FL GH2R FL TUES & PIPES CLAMPS MACHINES ADAPTORS VALVES ITE TYPE SPECIAL

29 GS-FLANGE P-Serie Couplings TUES & PIPES CLAMPS VALVES ITE TYPE Ferrules dim. Non-Skive Non-Skive Non-Skive Skive Skive Skive Non-Skive Non-Skive 1/ / / / / / / / ADAPTORS SPECIAL MACHINES

30 P-Serie Couplings TUES & PIPES CLAMPS 373 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL GS-FLANGE Choise of Ferrule type Ferrule Skive Non-skive P1T x P1T x type Ferrule Skive Non-skive M3K x M3K x P1T x M3K x G1/1SN x M3K x G1/1SN x G1/1SN x G1/1SN x M3K x M3K x M3K x G1/1SN x M4K x G1/1SN x M4K x G1/1SN x M4K x G1/1SN x G1/1SN x G1/1SN x C1TA x C1TA x C1TA x C1TA x C1TA x C1TA x C1TA x C1TA x G2/2SN x G2/2SN x G2/2SN x G2/2SN x G2/2SN x G2/2SN x G2/2SN x G2/2SN x G2/2SN x G2/2SN x CM2T x CM2T x CM2T x CM2T x CM2T x CM2T x CM2T x GS2SN x GS2SN x GS2SN x GS2SN x GS2SN x GS2SN x GS2SN x GS2SN x GS2SN x G2L x G2L x G2L x G2L x G2L x M4K x M4K x M4K x M5K x M5K x M5K x M5K x M6K x G3K x G3K x G3K x G4K x G4K x G4K x G4K x 4SP x 4SP x 4SP x 4SP x 4SP x 4SP x R x R x R x R x R x R x R x R x R x R x R x R x T x T x T x T x T x G5K x G5K x G5K x G2L x G2L x

31 GS-FLANGE P-Serie couplings (1-4 Wire) TUES & PIPES CLAMPS VALVES ITE TYPE SP Threads 60 Cone Straight female 90º female 45º female 90º compact Male parallel Female O-ring Female flat face 1/8 1/ /4 1/ /8 1/ /4 3/ /8 3/ /2 3/ /8 1/ /2 1/ /4 1/ /8 5/ /4 5/ /4 3/ /4 1 1/ /2 1 1/ SP / NPT ADAPTORS SPECIAL MACHINES Male Taper anjo SP NPT Male 1/8 1/ /4 1/ /8 1/ /4 3/ /8 3/ /2 3/ /8 1/ /2 1/ /4 1/ /8 5/ /4 5/ /4 3/ /4 1 1/ /2 1 1/

32 P-Serie couplings (1-4 Wire) GS-FLANGE JIC UNF Threads - JIC 74 Cone TUES & PIPES Straight Female 375 CLAMPS MACHINES ADAPTORS VALVES ITE TYPE SPECIAL 90º Female 45º Female Straight Male Fem. compact 90º 7/ / /2-20 1/ / / / / /4-12 3/ /4-12 1/ /8-14 1/ /8-14 5/ / / / / / / / / / / / / / / / Pipe O.D. Male straight Female O-ring DKOL/SKL Metric (L-Serie) Female 90º O-ring Female 45º O-ring 6 12x1,5 1/ x1,5 1/ x1,5 1/ x1,5 3/ x1,5 3/ x1,5 1/ x1,5 1/ x1,5 5/ x2,0 3/ x2, x2,0 1 1/ x2,0 1 1/

33 GS-FLANGE P-Serie couplings (1-4 Wire) TUES & PIPES CLAMPS VALVES ITE TYPE DKOS/SKS Metric (S-Serie) Pipe O.D. Tube Male straight Female O-ring Female 90º O-ring Female 45º O-ring 8 16 x 1,5 1/ x 1,5 1/ x 1,5 3/ x 1,5 3/ x 1,5 3/ x 1,5 3/ x 1,5 1/ x 2,0 5/ x 2,0 3/ x 2,0 3/ x 2, x 2, x 2,0 1 1/ x 2,0 1 1/ / 6000 psi SAE Flanges with O-Ring ADAPTORS SPECIAL MACHINES psi Straight SAE 90º SAE Flange 45º SAE Flange Splitflange Monoblock 1/2 1/ /4 3/ / / /4 1 1/ /2 1 1/ /2 1 1/ / psi 1/2 1/ /4 3/ / / /4 1 1/ /2 1 1/ /2 1 1/ /

34 P-Serie couplings (1-4 Wire) GS-FLANGE JIS - Komatsu - anjo - Kobelco - Kærcher TUES & PIPES JIS Japanese Part JIS Komatsu Kobelco Kærcher anjo 1/8 1/ /4 1/ /8 1/ /8 3/ /2 3/ /2 1/ /4 3/ /4 1 1/ /2 1 1/ x 1,5 1/ x 1,5 3/ x 1,5 1/ x 1,5 3/ x 2, x 1,0 1/ x 1,5 1/ x 1,5 1/ x 1,5 3/ x 1,5 3/ x 1,5 1/ x 1,5 1/ x 1,5 5/ x 1,5 3/ x 1,5 5/ x 1,5 3/ x 1, ORFS Male ORFS Female ORFS / SAE Flat Face O-Ring ORFS 45º ORFS 90º 9/ / / / / / / / / / / / / / / / / / / / / CLAMPS MACHINES ADAPTORS VALVES ITE TYPE SPECIAL

35 GS-FLANGE I-Serie Interlock Couplings (4-6 Spiral) TUES & PIPES CLAMPS VALVES ITE TYPE SAE 3000 psi with O-Ring Straight SAE flange 90º SAE flange 45º SAE flange Splitflange Monoblock 3/4 3/ / /4 1 1/ /2 1 1/ /2 1 1/ / / ADAPTORS SPECIAL MACHINES 378 SAE 6000 psi with O-Ring Straight SAE flange 90º SAE flange 45º SAE flange Splitflange Monoblock 3/4 3/ / /4 1 1/ /2 1 1/ /2 1 1/ / /

36 I-Serie Interlock Couplings (4-6 Spiral) GS-FLANGE Ferrules - SP and NPT Couplings TUES & PIPES 4-spiral ferrule 6-spiral ferrule Female O-ring 90º Fem. O-ring 45º Fem. O-ring NPT Male 3/4 3/ /4 1 1/ /2 1 1/ Female straight Male straight Female 90º 379 CLAMPS MACHINES ADAPTORS VALVES ITE TYPE SPECIAL JIC Couplings Female 45º 1 1/ / / / / / / / Pipe O.D. Male straight Female O-ring Female 90º O-ring DKOS / SKS Metric Female 45º O-ring x 2 3/ x 2 3/ x x x 2 1 1/ x 2 1 1/

37 GS-FLANGE G-Serie One Piece Couplings TUES & PIPES CLAMPS VALVES ITE TYPE ADAPTORS SPECIAL MACHINES 380 Choice of Couplings Following hosetypes / dimensions fits with G-couplings. Type / Dim. G1-04 G1-05 G1-06 G1-08 G1-10 G1-12 G1-16 G1-20 Type / Dim. G1-24 G1-32 2PW-05 G2-04 2PW-06 G2-05 2PW-08 G2-06 M3K-04 G2-08 M3K-05 G2-10 M3K-06 G2-12 M3K-10 G2-16 M3K-12 G2-20 M3K-16 G2-24 M4K-04 G2-32 M4K-05 CM2T-04 M4K-06 CM2T-05 M4K-08 CM2T-06 M4K-10 CM2T-08 M4K-12 CM2T-10 M5K-04 CM2T-12 M5K-05 CM2T-16 M5K-06 GL-04 M5K-08 GL-06 M6K-04 GL-08 R7-04 GL-10 R7-06 GL-12 R7-08 GL-16 R7-10 GL-20 R7-12 C1TH-04 R7-16 C1TH-05 R8-04 C1TH-06 R8-06 C1TH-08 R8-08 C1TH-10 R8-10 C1TH-12 R8-12 C1TH-16 R8-16 C1TH-20 T9-04 C1TH-24 T9-06 1PW-05 T9-08 1PW-06 T9-10 1PW-08 T9-12 Type / Dim. GP40-04 GP40-05 GP40-06 GP40-08 GP40-12 GP40-16 GP40-20 GP40-24 GP60-04 GP60-05 GP60-06 GP60-08 GP60-10 GP60-12 GP60-16 GP80-04 GP80-05 GP80-06 GP80-08 GP80-10 GP80-12 GP80-16 GP80-20 GP80-24 GP80-32 AF-04 AF-06 AF-08 AF-10 AF-12 AF-16 AF-20 AF-24 PF-04 PF-06 PF-08 PF-10 PF-12 PF-16 PF-20 PF-24 ACR-16 ACR-20 ACR-24 ACR-32 MEGA-12 MEGA-16 MEGA-20 MEGA-24 MEGA-32

38 G-Serie One Piece Couplings GS-FLANGE SP Threads 60 Cone TUES & PIPES Straight female 90º female 45º female 90º compact CLAMPS 1/8 1/4 G ,0 G G G /4 1/4 G ,0 G ,5 G ,1 G ,2 3/8 1/4 G ,0 G ,5 G ,1 G ,0 1/4 3/8 G x G G G /8 3/8 G ,3 G ,0 G ,1 G ,0 1/2 3/8 G ,8 G ,2 G ,0 G ,5 3/8 1/2 G ,0 G G G /2 1/2 G ,7 G ,5 G ,0 G ,5 3/4 1/2 G ,0 G G G /8 5/8 G ,0 G ,6 G ,1 G ,9 3/4 5/8 G ,0 G ,6 G ,0 G /4 3/4 G ,0 G ,0 G ,4 G ,0 1 1 G ,2 G ,3 G ,8 G ,6 1 1/4 1 1/4 G ,5 G ,8 G ,4 G /2 1 1/2 G ,1 G ,6 G ,7 G G ,6 G ,8 G G Male parallel G920- Female flat face G310- Male taper G900- anjo SP - = Not available SP / NPT G311- NPT Male 1/8 1/4 G ,0 G G G G ,0 1/4 1/4 G ,0 G G ,8 G ,3 G ,5 3/8 1/4 G ,0 G G ,0 G ,2 G ,0 1/4 3/8 G G G G ,6 G ,1 3/8 3/8 G ,3 G ,1 G ,1 G ,4 G ,6 1/2 3/8 G ,8 G ,6 G ,9 G ,8 G ,6 3/8 1/2 G ,0 G G ,0 G G ,5 1/2 1/2 G ,7 G ,0 G ,9 G ,2 G ,0 3/4 1/2 G ,0 G G G G ,5 5/8 5/8 G ,0 G G ,4 G G /4 5/8 G ,0 G G G G ,0 3/4 3/4 G ,0 G G ,7 G G ,0 1 1 G ,2 G G ,6 G G ,7 1 1/4 1 1/4 G ,5 G G G G ,0 1 1/2 1 1/2 G ,1 G G G G ,4 2 2 G ,4 G G ,4 G G ,8 - = Not available 381 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL

39 GS-FLANGE G-Serie One Piece Couplings TUES & PIPES CLAMPS VALVES ITE TYPE JIC - UNF Threads - JIC 74 Cone Straight Female 90º Female 45º Female Straight Male 7/ /4 G ,4 G ,2 G ,0 G ,5 1/2-20 1/4 G ,5 G ,2 G ,0 G ,5 9/ /4 G ,5 G ,0 G ,3 G ,5 9/ /8 G ,1 G ,1 G ,0 G ,6 3/4-12 3/8 G ,6 G ,5 G ,2 G ,6 3/4-12 1/2 G ,5 G ,6 G ,6 G ,5 7/8-14 1/2 G ,0 G ,9 G ,4 G ,0 7/8-14 5/8 G ,0 G ,5 G ,0 G ,5 1 1/ /8 G ,0 G ,5 G ,5 G ,0 1 1/ /4 G ,5 G ,2 G ,2 G ,5 1 3/ /4 G ,0 G ,0 G G ,0 1 5/ /4 G ,0 G G ,0 G ,0 1 5/ G ,2 G ,1 G ,8 G ,7 1 5/ G ,2 G ,2 G G ,2 1 5/ /4 G ,5 G ,0 G ,0 G ,5 1 7/ /2 G ,9 G ,6 G G / G ,2 G G G = Not available 382 DKOL / SKL - Metric - (L-Serie) - Standpipe ADAPTORS SPECIAL MACHINES Pipe Male straight Female O-ring Female 90º O-ring Female 45º O-ring Standpipe 6 12 x 1,5 1/4 G ,8 G ,8 G ,5 G ,5 G , x 1,5 1/4 G ,8 G ,4 G ,5 G ,5 G , x 1,5 1/4 G ,8 G ,3 G ,5 G ,3 G , x 1,5 3/8 G ,9 G ,2 G ,2 G ,5 G , x 1,5 3/8 G ,9 G ,9 G ,2 G ,9 G , x 1,5 1/2 G ,0 G ,3 G ,4 G ,1 G , x 1,5 1/2 G ,5 G ,3 G ,0 G ,2 G x 1,5 5/8 G ,0 G ,3 G ,6 G ,0 G x 2,0 3/4 G ,0 G ,3 G ,3 G ,1 G x 2,0 1 G ,4 G ,7 G ,3 G ,8 G x 2,0 1 1/4 G ,1 G ,1 G ,2 G ,4 G x 2,0 1 1/2 G ,2 G ,6 G ,6 G ,6 G = Not available

40 G-Serie One Piece Couplings GS-FLANGE DKOS / SKS - Metric S-Serie TUES & PIPES Pipe O.D. Male straight Female O-ring Female 90º O-ring Female 45º O-ring CLAMPS 383 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL 6 14 x 1,5 1/4 G G ,8 G G x 1,5 1/4 G ,0 G ,4 G ,5 G , x 1,5 1/4 G ,5 G ,3 G ,5 G , x 1,5 3/8 G ,1 G ,2 G ,2 G , x 1,5 3/8 G ,6 G ,9 G ,2 G , x 1,5 3/8 G ,6 G ,5 G ,2 G , x 1,5 3/8 G G G G x 1,5 1/2 G ,5 G ,6 G ,4 G , x 2,0 5/8 G ,0 G ,2 G ,6 G , x 2,0 3/4 G ,9 G ,5 G ,3 G x 2,0 3/4 G ,0 G ,6 G ,3 G , x 2,0 1 G ,4 G ,7 G G x 2,0 1 G ,4 G ,2 G ,3 G , x 2,0 1 1/4 G ,1 G ,8 G G x 2,0 1 1/2 G G G G = Not available 3000 psi SAE Flanges with O-Ring Straight SAE 90º SAE Flange 45º SAE Flange Splitflange Monoblock 1/2 1/2 G ,5 G ,7 G /4 3/4 G ,0 G ,7 G ,5 G G /4 G ,8 G ,7 G , G ,2 G ,3 G ,9 G G /4 1 G ,2 G ,3 G , /4 1 1/4 G ,5 G ,5 G ,0 G G /2 1 1/4 G ,5 G G /2 1 1/2 G ,0 G ,6 G ,8 G G /2 G ,0 G ,6 G , G ,0 G ,8 G ,0 G G = Not available

41 GS-FLANGE G-Serie One Piece Couplings TUES & PIPES CLAMPS VALVES ITE TYPE Powerwash Powerwash swivel female Powerwash w/o-ring 10 1/4 PW-0410KO 36,5 GPW-0410KO /18 PW-0510KO 36,5 GPW-0510KO /16 PW-0511KO 39,5 GPW-0511KO /8 PW-0610KO 36,6 GPW-0610KO /8 PW-0611KO 39,6 GPW-0611KO - M22 X 1,5 1/4 PW-0415KR - GPW-0415KR 28 M22 X 1,5 5/16 PW-0515KR - GPW-0515KR 27,5 M22 X 1,5 3/8 PW-0615KR - GPW-0615KR 27,5 - = Not available 384 ADAPTORS SPECIAL MACHINES

42 GS-Serie Couplings GS-FLANGE Ferrules TUES & PIPES CLAMPS G3K-G4K G596- G5K-G6K G599- G3K-G4K-G5K-G6K 3/8 G G G ,8 1/2 G G G ,4 5/8 G G G ,7 3/4 G G G ,7 1 G G G ,6 1 1/4 G ,5 G ,8 G /2 G G G ,7 2 G G G ,6 Male parallel 385 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL G501- Female O-ring G503- Female 90º O-ring - = Not available Inserts SP 60 Cone G504- Female 45º O-ring G511- NPT Male 3/8 3/8 G ,2 G ,5 G ,2 G ,3 G ,2 1/2 1/2 G ,0 G ,5 G ,2 G ,1 G ,5 5/8 5/8 G ,7 G ,2 G ,2 G ,7 G /4 3/4 G ,7 G ,0 G ,0 G ,4 G ,0 1 1 G ,2 G ,6 G ,6 G ,1 G ,2 1 1/4 1 1/4 G ,9 G ,4 G ,4 G ,9 G ,8 1 1/2 1 1/2 G ,7 G ,2 G ,8 G ,7 G ,7 2 2 G G G G G ,0 - = Not available

43 GS-FLANGE GS-Serie Couplings TUES & PIPES CLAMPS VALVES ITE TYPE Inserts UNF JIC 74 Seat Female straight Male straight Female 90º Female 45º 3/4 3/8 G ,3 G ,2 G ,2 G ,2 7/8 1/2 G ,5 G ,5 G ,5 G ,5 11/16 5/8 G ,7 G ,7 G ,7 G ,7 11/16 3/4 G ,2 G ,0 G ,0 G ,0 15/16 3/4 G ,4 G ,0 G ,0 G ,0 15/16 1 G ,2 G ,2 G ,6 G ,7 15/8 1 G ,8 G ,7 G ,6 G ,6 15/8 1 1/4 G ,1 G ,9 G ,9 G ,7 17/8 1 1/2 G ,3 G ,7 G ,8 G ,4 21/2 2 G ,9 G ,3 G G = Not available 386 Inserts DKOS / SKS Metric ADAPTORS SPECIAL MACHINES Pipe O.D. - = Not available Male straight Female O-ring Female 90º O-ring Female 45º O-ring x 1,5 3/8 G ,9 G ,2 G ,2 G , x 1,5 1/2 G ,0 G ,5 G ,5 G , x 2 5/8 G ,7 G ,7 G ,2 G , x 2 3/4 G ,0 G ,0 G ,5 G , x 2 3/4 G ,0 G ,4 G ,0 G , x 2 1 G ,2 G ,6 G ,6 G , x 2 1 G ,2 G ,6 G ,6 G , x 2 1 1/4 G ,9 G ,9 G ,4 G , x 2 1 1/2 G G ,7 G G

44 GS-Serie Couplings GS-FLANGE SAE 3000 psi with O-Ring TUES & PIPES CLAMPS Straight SAE fl. 90º SAE fl. 45º SAE fl. Split flange Monoblock 1/2 G ,5 G ,5 G ,5 G G /8 G ,7 G ,7 G , /4 G ,0 G ,0 G ,0 G G /4 G ,0 G ,0 G , G ,6 G ,6 G ,6 G G G ,2 G ,8 G , /4 G ,9 G ,9 G ,9 G G /4 G ,9 G ,9 G , /2 G ,7 G ,2 G ,5 G G /2 G ,9 G ,2 G , G ,2 G ,1 G ,0 G G G G G = Not available Straight SAE flange 90º SAE flange 45º SAE flange Split flange Monoblock 1/2 G ,5 G ,5 G ,5 G G /8 G ,7 G ,7 G , /4 G ,0 G ,0 G ,0 G G /4 G ,0 G ,0 G , G ,6 G ,6 G ,6 G G G ,2 G ,8 G , /4 G ,9 G ,9 G ,9 G G /4 G ,9 G ,9 G , /2 G ,7 G ,2 G ,5 G G /2 G ,7 G ,2 G , G ,0 G ,1 G ,0 G G G G G SAE 6000 psi with O-Ring - = Not available 387 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL

45 GS-FLANGE GS-Serie couplings TUES & PIPES CLAMPS VALVES ITE TYPE 388 Catepillar Style O-Ring Flange Straight SAE flange 22º SAE flange 30º SAE flange 45º SAE flange 3/4 3/4 G ,0 G ,0 G ,0 G ,0 3/4 3/4 G L - G L - G L - G L - 3/4 3/4 G S - G S - G S - G S - 1 3/4 G ,0 G G ,0 G ,0 1 3/4 G S - G S - G S - G S G ,2 G ,9 G ,7 G ,3 1 1 G S - G S - G S - G S G L - G L - G L - G L - 1 1/4 1 G ,2 G ,9 G ,7 G ,3 1 1/4 1 1/4 G ,9 G ,9 G ,0 G ,9 1 1/4 1 1/4 G S - G S - G S - G S - 1 1/2 1 1/4 G ,9 G ,9 G ,9 G ,9 1 1/2 1 1/4 G S - G S - G S - G S - 1 1/2 1 1/2 G ,7 G G G , /2 G ,7 G G G ,2 2 2 G ,0 G G G ,0 Catepillar Style O-Ring Flange ADAPTORS SPECIAL MACHINES - = Not available 60º SAE flange 67º SAE flange 90º SAE flange 3/4 3/4 G G G /4 3/4 G L - G L - G L 66,0 3/4 3/4 G S - G S - G S 74,0 1 3/4 G ,0 G G /4 G S - G S - G S 66,0 1 1 G ,0 G ,0 G G S - G S - G S 74,1 1 1 G L - G L - G L 74,1 1 1/4 1 G ,0 G ,0 G ,1 1 1/4 1 1/4 G ,9 G ,9 G /4 1 1/4 G S - G S - G S 94,9 1 1/2 1 1/4 G ,9 G ,9 G /2 1 1/4 G S - G S - G S 94,9 1 1/2 1 1/2 G G G , /2 G ,0 G G G G G ,1

46 GS-Serie Couplings GS-FLANGE ORFS/SAE Flat Face O-Ring CLAMPS TUES & PIPES Male straight Female straight Female 45º Female 90º Female 135º 11/16-12UN 3/8 G S - G S - G S - G S 42,2 G S - 11/16-12UN 3/8 G L - G L - G L - G L 49,2 G L - 11/16-16UN 3/8 G ,2 G ,2 G ,2 G G /16-12UN 3/8 G G ,2 G ,2 G ,2 G /16-16UN 1/2 G ,5 G ,5 G ,5 G G /16-12UN 1/2 G S - G S - G S - G S 48,5 G S UNS 1/2 G G ,5 G ,5 G ,5 G /16-12UN 1/2 G S - G S - G S - G S 69,5 G S - 13/16-12UN 1/2 G G ,5 G G G UNS 5/8 G G ,7 G ,7 G ,7 G UNS 5/8 G L - G L - G L - G L 62,7 G L UNS 3/4 G G ,0 G G G UNS 3/4 G S - G S - G S - G S 60,0 G S - 13/16-12UN 3/4 G S - G S - G S - G S 77,0 G S - 13/16 -UN 3/4 G G ,0 G ,0 G ,0 G /16-12UN 3/4 G L - G L - G L - G L 77,0 G L - 17/16-12UN 3/4 G S - G S - G S - G S 86,0 G S - 17/16-12UN 3/4 G ,0 G ,0 G ,0 G G ,5 17/16-12UN 1 G S - G S - G S - G S 87,6 G S - 17/16-12UN 1 G ,2 G ,4 G G ,6 G /16-12UN 1 G L - G L - G L - G L 87,6 G L /16-12UN 1 G S - G S - G S - G S 97,6 G S /16-12UN 1 G G ,3 G ,6 G ,6 G /16-12UN 1 1/4 G S - G S - G S - G S 100,9 G S - 111/16-12UN 1 1/4 G ,9 G ,9 G ,8 G ,9 G /16-12UN 1 1/4 G L - G L - G L - G L 100,9 G L UN 1 1/4 G G ,9 G G G UN 1 1/2 G G ,2 G ,7 G ,8 G Straight SAE flange G555-45º SAE flange - = Not available Komatsu Style SAE Flange G554-90º SAE flange 5/8 1/2 G ,1 G G /8 5/8 G ,7 G ,7 G ,7 5/8 3/4 G ,0 G G ,0 - = Not available 389 MACHINES ADAPTORS VALVES ITE TYPE SPECIAL