Quick Release Couplings & Live Swivel Joints
|
|
|
- Marjory Lawson
- 6 years ago
- Views:
Transcription
1 hardy spicer HOSE FITTINGS DRIVESHAFTS Quick Release Couplings & Live Swivel Joints, 17-1 Discovery Road, Dandenong South, Victoria, 175 Toll free Ph:
2 DISCLAIMER Disclaimer The information and dimensions listed in these catalogues is correct to the best of our knowledge and belief, having been compiled from reliable and official sources of information. However (HS Company Pty Ltd) accepts no responsibility for possible errors, omissions or unsuitable parts being listed or fitted to any vehicle. Dimensions listed are nominal throughout. Due to our continuous product and range development we reserve the right to alter the specification without prior notice. We welcome any feedback re suspected errors or omissions to the information enclosed. We can be contacted via Or via Ph or Fax Alternatively via mail at PO Box 4262, Dandenong South, Vic Quick Release Couplings D:6-ii
3 Quick Release Couplings DESCRIPTION: QR S CONTENTS QUICK RELEASE S... D:6-2 QUICK RELEASE SEAL KITS... D:6-7 QUICK RELEASE S - INDUSTRIAL... D:6-8 QUICK RELEASE CAPS & PLUGS... D:6-9 AIR LINE S...D:6-11 TAIMI LIVE SWIVELS... D:6-1 TAIMI LIVE SWIVEL CARTRIDGES... D:6-16 INTERTRACO LIVE SWIVELS... D:6-17 TAIMI TENSIONER... D:6-18 TAIMI TENSIONER SPANNER... D:6-18 TAIMI CIRCULAR & SPHERICAL JOINTS... D:6-19 TAIMI MANIFOLDS... D:6-20 D:6-1
4 QR S FEMALE F-ISOA P ( ) F-ISOA P ( ) F-ISOA P ( ) F-ISOA P ( ) F-ISOA P ( ) FEMALE F-ISOB N ( ) F-ISOB P ( ) F-ISOB N ( ) F-ISOB N ( ) F-ISOB P ( ) F-ISOB N ( ) F-ISOB P ( ) F-ISOB N ( ) F-ISOB P ( ) MALE M-ISOA P ( ) M-ISOA P ( ) M-ISOA P ( ) M-ISOA P ( ) M-ISOA P ( ) MALE M-ISOB N ( ) M-ISOB P ( ) M-ISOB N ( ) M-ISOB N ( ) M-ISOB P ( ) M-ISOB N ( ) M-ISOB P ( ) M-ISOB N ( ) M-ISOB P ( ) ISO Type A TIP Ø (mm) THREAD P - BSPP RATED FLOW (lpm) ISO Type B MAXIMUM OPERATING DROP AT RATED FLOW 1/4" (6.) /4" /8" (10) 17.2 /8" /2" (12.5) /2" /4" (20) 29 /4" " (25) 4. 1" TIP Ø (mm) THREAD P - BSPP N - NPT RATED FLOW (lpm) MAXIMUM OPERATING DROP AT RATED FLOW 1/4" (6.) /4" /4" (6.) /4" /8" (10) 19 /8" /2" (12.5) 2.5 /8" /2" (12.5) 2.5 1/2" /4" (20) 1.4 /4" /4" (20) 1.4 /4" " (25) 7.8 1" " (25) 7.8 1" Ø Ø Quick Release Couplings D:6-2
5 Quick Release Couplings FEMALE F-FF P ( ) F-FF P ( ) F-FF P ( ) F-FF P ( ) F-FF P ( ) F-FF P ( ) F-FF P ( ) F-FF P ( ) F-FF P ( ) FEMALE F-FF P ( ) F-FF P ( ) F-FF P ( ) F-FF P ( ) F-FF U ( ) F-FF U ( ) F-FF U ( ) F-FF U ( ) F-FF U ( ) MALE M-FF P ( ) M-FF P ( ) M-FF P ( ) M-FF P ( ) M-FF P ( ) M-FF P ( ) M-FF P ( ) M-FF P ( ) M-FF P ( ) ISO Flat Face TIP Ø (mm) THREAD P - BSPP QR S ISO Flat Face - Pressure Eliminator MALE M-FF P-E ( ) M-FF P-E ( ) M-FF P-E ( ) M-FF P-E ( ) M-FF U-E ( ) M-FF U-E ( ) M-FF U-E (OF ) M-FF U-E (OF ) M-FF U-E (OF ) Ø RATED FLOW (lpm) Ø MAXIMUM OPERATING DROP AT RATED FLOW 1/4" (6.) /4" /8" (10.0) 19.7 /8" /8" (10.0) /2" /2" (12.5) /2" /2" (12.5) 24.5 /4" /8" (16.0) 27.0 /4" /4" (19.0) 29.9 /4" /4" (19.0) " " (24.4) 6.0 1" TIP Ø (mm) THREAD P - BSPP U - UNO RATED FLOW (lpm) MAXIMUM OPERATING DROP AT RATED FLOW /8" (10.0) 19.7 /8" /8" (10.0) /2" /2" (12.5) /2" /4" (19.0) 29.9 /4" /8" (10.0) 19.7 /4" /2" (12.5) /8" /2" (12.5) /16" /8" (16.0) /16" /4" (19.0) /16" D:6-
6 QR S PBR Style Hydraulic Coupling (for INDUSTRIAL application) These units are designed to be used as a means of connecting a hose to a hydraulic oil supply, allowing quick and easy disconnecting without loss of oil. They also prevent air entering the system when reconnecting. FEMALE F-PBR P (PBR-16F) FEMALE F-NOR P ( ) F-NOR P ( ) F-NOR P ( ) F-NOR P ( ) F-NOR P ( ) PBR Interchange Series Coupling Nordic (Tema) Style Couplings MALE M-NOR P ( ) M-NOR P ( ) M-NOR P ( ) M-NOR P ( ) M-NOR P ( ) TIP Ø (mm) THREAD P - BSPP RATED FLOW (lpm) MAXIMUM OPERATING DROP AT RATED FLOW 1/4" (6.) /4" /8" (10) 19.9 /8" /2" (12.5) /2" Nordic (Tema) Style Couplings - Pressure Eliminator FEMALE F-NOR P-E ( ) F-NOR P-E ( ) MALE M-PBR P (PBR-16M) MALE M-NOR P-E ( ) M-NOR P-E ( ) /4" (20.0) 2.7 /4" " (25.0) " TIP Ø (mm) TIP Ø (mm) THREAD P - BSPP THREAD P - BSPP RATED FLOW (lpm) RATED FLOW (lpm) MAXIMUM OPERATING MAXIMUM OPERATING DROP AT RATED FLOW 1" (25) 8.4 1" DROP AT RATED FLOW /4" (20.0) 2.7 /4" " (25.0) " Ø Quick Release Couplings D:6-4
7 Quick Release Couplings FEMALE F-TLX P ( ) F-TLX N ( ) F-TLX P ( ) F-TLX N ( ) F-TLX P ( ) F-TLX N ( ) F-TLX P ( ) FEMALE MALE M-TLX P ( ) M-TLX N ( ) M-TLX P ( ) M-TLX N ( ) M-TLX P ( ) M-TLX N ( ) M-TLX P ( ) Also available in poppet style. TLX Series Couplings HPJ Series Bar Jacking MALE THREAD P - BSPP N - NPT TIP Ø (mm) THREAD N - NPTF RATED FLOW (lpm) QR S RATED FLOW (lpm) MAXIMUM OPERATING /4" (20) /4" /4" (20) /4" " (10) 1" " (12.5) 1" /4" (2) 1 1/4" /4" (2) 1 1/4" /2" (8) 1 1/2" MAXIMUM OPERATING DROP AT RATED FLOW BURST COUPLED F-HPJ N M-HPJ N /16" (5) /4" F-HPJ N M-HPJ N 1/4" (6.) 19 /8" D:6-5
8 QR S FEMALE F-AGB P (PDS ) F-AGB P (PDS ) F-AGB P (PDS ) F-AGB P (PDS ) F-AGB P (PDS ) FEMALE F-AGP P (PDV ) F-AGP P (PDV ) F-AGP P (PDV ) F-AGP P (PDV ) F-AGP P (PDV ) Agricultural Style (Ball Type) MALE M-AGB P (PDS ) M-AGB P (PDS ) M-AGB P (PDS ) M-AGB P (PDS ) M-AGB P (PDS ) TIP Ø (mm) THREAD P - BSPP RATED FLOW (lpm) MAXIMUM OPERATING Agricultural Style (Poppet Type) MALE M-AGP P (PDV ) M-AGP P (PDV ) M-AGP P (PDV ) M-AGP P (PDV ) M-AGP P (PDV ) DROP AT RATED FLOW 1/4" (6.) 14 1/4" /8" (10) 19 /8" /2" (12.5) 21 1/2" /4" (20) 28 /4" " (25) 1 1" TIP Ø (mm) THREAD P - BSPP RATED FLOW (lpm) MAXIMUM OPERATING DROP AT RATED FLOW 1/4" (6.) 14 1/4" /8" (10) 19 /8" /2" (12.5) 21 1/2" /4" (20) 28 /4" " (25) 1 1" Ø Ø Quick Release Couplings D:6-6
9 Quick Release Couplings DN NBR SEAL KIT FF Series Seal Kits SUIT MALE M-FF P M-FF P M-FF P M-FF P M-FF P DIN NBR SEAL KIT Nordic Series Seal Kits SUIT F-NOR P F-NOR P F-NOR P F-NOR P F-NOR P QR S Note: Seal kits listed above are for CEJN brand of coupling. D:6-7
10 D:6-8 QR S PB10 Hydraulic Coupling (for INDUSTRIAL application) These units are designed to be used as a means of connecting a hose to a hydraulic oil supply, allowing quick and easy disconnecting without loss of oil. They also prevent air entering the system when reconnecting. FEMALE BSPT MALE CAP PB10 Series Coupling PB10 Series Dust Covers SUIT MALE REPAIR KITS: (Component parts not sold separately) Repair Kit No Suits PB10-22 PB10-29 Consists Of No. Off 'O' Ring 1 - OR10027 Washer 1 PB10-25 PB10-25 Washer 1 PB10-0 PB10-0 Valve Spindle 1 PB10-2 PB10-2 Valve Guide 1 PB10-4 PB10-4 Ring 1 PB10-1 PB10-1 Circlip 1 SIC SIC Spring 1 PB10-6 PB10-6 PLUG SUIT FEMALE 1" PB10-12 PB10-22 PB10-11 PB10-29 Important note: Seal kits only suit the original PBR couplings. TIP Ø (mm) THREAD P - BSPP RATED FLOW (lpm) MAXIMUM OPERATING DROP AT RATED FLOW PB PB " (25) 8.1 1" Quick Release Couplings
11 Quick Release Couplings BSPP DUST CAPS AND PLUGS CAP ISOA Series SUIT MALE FF Series QR S PLUG SUIT FEMALE 1/4" DC-ISOA-04 M-ISOA P DP-ISOA-04 F-ISOA P /8" DC-ISOA-06 M-ISOA P DP-ISOA-06 F-ISOA P 1/2" DC-ISOA-08 M-ISOA P DP-ISOA-08 F-ISOA P /4" DC-ISOA-12 M-ISOA P DP-ISOA-12 F-ISOA P 1" DC-ISOA-16 M-ISOA P DP-ISOA-16 F-ISOA P BSPP CAP SUIT MALE PLUG SUIT FEMALE 1/4" DC-FF-04 M-FF P DP-FF-04 F-FF P /8" DC-FF-06 M-FF P DP-FF-06 F-FF P /8" DC-FF-06 M-FF P DP-FF-06 F-FF P 1/2" DC-FF-08 M-FF P DP-FF-08 F-FF P 1/2" DC-FF-08 M-FF P DP-FF-08 F-FF P /4" DC-FF-12 M-FF P DP-FF-12 F-FF P 1" DC-FF-16 M-FF P DP-FF-16 F-FF P NPT CAP HPJ Series SUIT MALE PLUG SUIT FEMALE 1/4" DC-HPJ-04 M--HPJ N DP-HPJ-04 F-HPJ N /8" DC-HPJ-06 M-HPJ N DP-HPJ-06 F-HPJ N D:6-9
12 QR S BSPP DUST CAPS AND PLUGS CAP Nordic Series SUIT MALE PLUG SUIT FEMALE 1/4" DC-NOR-04 M-NOR P DP-NOR-04 F-NOR P /8" DC-NOR-06 M-NOR P DP-NOR-06 F-NOR P 1/2" DC-NOR-08 M-NOR P DP-NOR-08 F-NOR P /4" DC-NOR-12 M-NOR P DP-NOR-12 F-NOR P 1" DC-NOR-16 M-NOR P DP-NOR-16 F-NOR P BSPP CAP TLX Series Caps & Plugs SUIT MALE PLUG SUIT FEMALE /4" DC-TLX-12 M-TLX P DP-TLX-12 F-TLX P 1" DC-TLX-16 M-TLX P DP-TLX-16 F-TLX P 1 1/4" DC-TLX-20 M-TLX P DP-TLX-20 F-TLX P 1 1/2" DC-TLX-24 M-TLX P DP-TLX-24 F-TLX P Note: The above caps and plugs also suit the TLX NPT range of couplings Quick Release Couplings D:6-10
13 Quick Release Couplings NITTO AIR LINE S Part Number Thread Details Figure Standard Size Type AIR S Figure 1 Figure 2 Figure MALE PLUGS 20PMNIT 1 1/4" BSP - Male - 20PFNIT 2 1/4" BSP - Female - Hose Size 20PHNIT - - 1/4" 0PMNIT 1 /8" BSP - Male - 0PFNIT 2 /8" BSP - Female - 0PHNIT - - /8" 40PMNIT 1 1/2" BSP - Male - 40PFNIT 2 1/2" BSP - Female - 40PHNIT - - 1/2" Figure 4 Figure 5 Figure 6 Standard Series 1 Touch 200 Series FEMALE COUPLERS Part Number Thread Details Figure Standard 200 Series Size Type 20SMNIT 20SM-200NIT 4 1/4" BSP - Male - 20SFNIT 20SF-200NIT 5 1/4" BSP - Female - Hose Size 20SHNIT 20SH-200NIT /4" 0SMNIT 0SM-200NIT 4 /8" BSP - Male - 0SFNIT 0SF-200NIT 5 /8" BSP - Female - 0SHNIT 0SH-200NIT /8" 40SMNIT 40SM-200NIT 4 1/2" BSP - Male - 40SFNIT 40SF-200NIT 5 1/2" BSP - Female - 40SHNIT 40SH-200NIT /2" Notes Notes D:6-11
14 AIR S Part Number Figure AIR LINE S Size Thread Details Type PA /4" BSP - Male - PA /4" BSP - Female - Hose Size ALSO AVAILABLE IN NPT THREADS Notes PA /4" Barb type adaptor PA /16" Barb type adaptor PA /8" BSP - Female - PA /8" BSP - Female PA /8" Barb type adaptor PA /2" BSP - Male - PA /2" BSP - Female - PA /2" Barb type adaptor Part Number Figure 1 Figure 2 Figure Figure MALE PLUGS Figure 5 Figure 6 FEMALE COUPLERS Size Thread Details Type PA /4" BSP - Male - PA /4" BSP - Female - PA /8" BSP - Male - PA /8" BSP - Female - PA /2" BSP - Male - PA /2" BSP - Female - Hose Size Notes Quick Release Couplings D:6-12
15 TAIMI - LIVE SWIVELS Live Swivels Part No. A B P1 - JIC P2 - UNO H1 H2 Seal Kit SZ-J08M-JB08F.1" 1.50" /4"-16 UNF /4"-16 UNF 11/16" 1 1/4" SZ SK-A SZ-J12M-JB12F 4.12" 2.00" 1 1/16"-12 UN 1 1/16"-12 UN 15/16" 1 5/8" SZ SK-A SZ-J16M-JB16F 4.6" 2.22" 1 5/16"-12 UN 1 5/16"-12 UN 1 /16" 1 7/8" SZ SK-A SZ-J20M-JB20F 5.12" 2.75" 1 5/8"-12 UN 1 5/8"-12 UN 1 1/2" 2 /8" SZ SK-A SZ-J24M-JB24F 5.4".00" 1 7/8"-12 UN 1 7/8"-12 UN 1 /4" 2 1/2" SZ SK-A SZ-J2M-JB2F 6.50".88" 2 1/2"-12 UN 2 1/2"-12 UN 2 5/16" 1/4" SZ-2-001SK-A A P1 B P2 H1 H2 H2 STRAIGHT SWIVEL JOINTS - BSPP M-F Part No. A B P1 - BSPP P2 - BSPP H1 H2 Seal Kit SZ-P08M-P08F 2.94" 1.5" G 1/2 G 1/2 /4" 1 5/16" SZ SK-A SZ-P12M-P12F.81" 2.00" G /4 G /4 15/16" 1 5/8" SZ SK-A SZ-P16M-P16F 4.1" 2.22" G 1 G 1 1 /16" 1 7/8" SZ SK-A SZ-P20M-P20F 4.50" 2.75" G 1 1/4 G 1 1/4 1 1/2" 2 /8" SZ SK-A STRAIGHT SWIVEL JOINTS - JIC M - UNO F A P1 B P2 H1 H2 H2 STRAIGHT SWIVEL JOINTS - ORFS M-F Part No. A B P1 - ORFS P2 - ORFS H1 H2 Seal Kit SZ-S08M-S08F.00" 1.5" 1/16"-16 UNF 1/16"-16 UNF /4" 1 5/16" SZ SK-A SZ-S12M-S12F.86" 2.09" 1 /16"-12 UN 1 /16"-12 UN 1 1/16" 1 /4" SZ SK-A SZ-S16M-S16F 4.8" 2.1" 1 7/16"-12 UN 1 7/16"-12 UN 1 5/16" 2" SZ SK-A SZ-S20M-S20F 4.68" 2.75" 1 11/16"-12 UN 1 11/16"-12 UN 1 9/16" 2 /8" SZ SK-A D:6-1
16 TAIMI - LIVE SWIVELS A P1 B P2 H1 H2 90º SWIVEL JOINTS - JIC M - UNO F Part No. A B P1 - JIC P2 - UNO H1 H2 Seal Kit SZ90-J08M-B08F.4" 1.50" /4"-16 UNF SAE 08 11/16" 1 1/4" SZ SK-A SZ90-J12M-B12F 4.26" 2.00" 1 1/16"-12 UN SAE 12 15/16" 1 5/8" SZ SK-A SZ90-J16M-B16F 4.91" 2.22" 1 5/16"-12 UN SAE 16 1 /16" 1 7/8" SZ SK-A SZ90-J20M-B20F 5.71" 2.75" 1 5/8"-12 UN SAE /2" 2 /8" SZ SK-A SZ90-J24M-B24F 6.18" 2.97" 1 7/8"-12 UN SAE 24 1 /4" 2 1/2" SZ SK-A SZ90-J2M-B2F 7.59".89" 2 1/2"-12 UN SAE 2 2 5/16" 1/4" SZ-2-001SK-A A P1 B P2 H1 H2 90º SWIVEL JOINTS - BSPP M - UNO F Part No. A B P1 - BSPP P2 - UNO H1 H2 Seal Kit SZ90-P08M-B08F.22" 1.50" G 1/2 SAE 08 /4" 1 5/16" SZ SK-A SZ90-P12M-B12F 4.20" 2.00" G /4 SAE 12 15/16" 1 5/8" SZ SK-A SZ90-P16M-B16F 4.84" 2.22" G 1 SAE 16 1 /16" 1 7/8" SZ SK-A SZ90-P20M-B20F 5.44" 2.75" G 1 1/4 SAE /2" 2 /8" SZ SK-A A Live Swivels P1 B P2 H1 H2 90º SWIVEL JOINTS - ORFS M - UNO F Part No. A B P1 - ORFS P2 - UNO H1 H2 Seal Kit SZ90-S08M-B08F.22" 1.5" 1/16"-16 UNF SAE 08 /4" 1 5/16" SZ SK-A SZ90-S12M-B12F 4.20" 2.09" 1 /16"-12 UN SAE /16" 1 /4" SZ SK-A SZ90-S16M-B16F 4.84" 2.1" 1 7/16"-12 UN SAE /16" 2" SZ SK-A SZ90-S20M-B20F 5.44" 2.75" 1 11/16"-12 UN SAE /16" 2 /8" SZ SK-A D:6-14
17 TAIMI - LIVE SWIVELS Live Swivels Part No. A B P1 - JIC P2 - UNO H1 H2 Seal Kit SM2A-J " 1.50" /4"-16 UNF /4"-16 UNF 11/16" 1 1/4" SZ SK-A SM2A-J " 2.00" 1 1/16"-12 UN 1 1/16"-12 UN 15/16" 1 5/8" SZ SK-A SM2A-J " 2.25" 1 5/16"-12 UN 1 5/16"-12 UN 1 /16" 1 7/8" SZ SK-A SM2A-J " 2.75" 1 5/8"-12 UN 1 5/8"-12 UN 1 1/2" 2 /8" SZ SK-A Note: Other configurations are available on request. DUAL IN-LINE SWIVEL - JIC M - JIC M D:6-15
18 TAIMI - LIVE SWIVEL CARTRIDGES B A P1 C H1 H2 MALE JIC Part No. A B C P1 - JIC H1 H2 Seal Kit SZ4-06-J01M 1.90" 1.25" 1.1" 9/16"-18 UNF 1/2" 1" SZ SK-A SZ4-08-J01M 2.5" 1.50" 1.58" /4"-16 UNF 11/16" 1 1/4" SZ SK-A SZ4-12-J01M.15" 2.00" 1.95" 1 1/16"-12 UN 15/16" 1 5/8" SZ SK-A SZ4-16-J01M.6" 2.22" 2.8" 1 5/16"-12 UN 1 /16" 1 7/8" SZ SK-A SZ4-20-J01M.96" 2.75" 2.55" 1 5/8"-12 UN 1 1/2" 2 /8" SZ SK-A SZ4-24-J01M 4.17".00" 2.68" 1 7/8"-12 UN 1 /4" 2 1/2" SZ SK-A SZ4-2-J01M 5.0".88".28" 2 1/2"-12 UN 2 5/16" 1/4" SZ-2-001SK-A B A P1 C H1 H2 MALE BSPP Part No. A B C P1 - BSPP H1 H2 Seal Kit SZ4-06-P01M 1.81" 1.5" 1.05" G /8 5/8" 1 1/4" SZ SK-A SZ4-08-P01M 2.6" 1.5" 1.9" G 1/2 /4" 1 5/16" SZ SK-A SZ4-12-P01M.00" 2.00" 1.86" G /4 15/16" 1 5/8" SZ SK-A SZ4-16-P01M.50" 2.22" 2.25" G 1 1 /16" 1 7/8" SZ SK-A SZ4-20-P01M.6" 2.75" 2.25" G 1 1/4 1 1/2" 2 /8" SZ SK-A A B Live Swivels P1 C D:6-16 H1 MALE ORFS Part No. A B C P1 - ORFS H1 H2 Seal Kit SZ1-08-S01M 2.41" 1.5" 1.44" 1/16"-16 UNF /4" 1 5/16" SZ SK-A SZ1-08-S01M.06" 2.09" 1.86" 1 /16"-12 UN 1 1/16" 1 /4" SZ SK-A SZ1-08-S01M.50" 2.1" 2.25" 1 7/16"-12 UN 1 5/16" 2" SZ SK-A SZ1-08-S01M.69" 2.75" /16"-12 UN 1 9/16" 2 /8" SZ SK-A H2
19 INTERTRACO - LIVE SWIVELS Live Swivels SJ 10 STRAIGHT SWIVEL JOINTS - SERIES SJ MAXIMUM MAXIMUM CODE A B C D E F G IN ROTATION BAR BAR SJ /4" ES 19 ES SJ /8" ES 24 ES SJ /2" ES 27 ES SJ /4" ES 4 ES SJ " 90 Ø ES 41 CH SJ /4" 101 Ø ES 50 CH SJ 90 (<1") SJ 10 ( 1") SJ 90 ( 1") 90 SWIVEL JOINTS - SERIES SJ MAXIMUM MAXIMUM CODE A B C D E F G H IN ROTATION BAR BAR SJ /4" ES ES SJ /8" ES 24 6 ES SJ /2" ES ES SJ /4" ES 4 79 ES SJ " 11 Ø ES Ø SJ /4" 92 Ø ES D:6-17
20 TAIMI TENSIONER HARDY SPICER TENSIONER Length Width Height Ports Qty x Thread SM6T-J501S " 8 7/8" 15 /8" 1 x JIC /4" 2 x JIC 7/8" x JIC 1 1/16" A C B Notes Suits Sandvik Jumbos Live Swivels L TENSIONER SPANNER HARDY SPICER Head A Head B Thickness C Length L SK-1208-J01 2 7/8" 2 /8" /16" 12" SK-1210-J01 2 7/8" 2 11/16" /16" 12 1/8" D:6-18
21 CIRCULAR & SPHERICAL JOINTS B A C Live Swivels CIRCULAR JOINTS Part Number A B C Ports Notes Qty x Thread QTY x Thread QTY x Thread SR4-JJ " 7.6" 8.88" x JIC-1 5/16" 1 x JIC-1 1/16" Various SR4-JJ " 7.6" 8.88" 2 x JIC-1 5/16" 1 x JIC-1 1/16" 1 x JIC-/4" Logmax 7000 B A C SPHERICAL JOINTS Part Number A B C Ports Notes Qty x Thread QTY x Thread QTY x Thread SR5-JJ " 7.6" 1.25" x JIC-1 5/16" 2 x JIC-1 1/16" Various D:6-19
22 TAIMI MANIFOLDS HARDY SPICER SM2A-W6-501 SM2A-J MANIFOLD Port Qty Thread Configuration Notes / Application SM2A-J x 1 1/16" JIC SM2A-W x 1 5/16" JIC 2 x 1 1/16" JIC SM2A-W x 1 5/16" JIC 2 x 1 1/16" JIC SM2A-W x 1 7/16" ORFS 1 x 1 5/8" JIC 2 x 1 1/16" JIC Waratah 616, 622B, 624 Waratah 400 Waratah 616, 622B, 624 Note: Other options and configurations are available on request. SM2A-W6-514 Live Swivels D:6-20
23 NOTES Live Swivels D:6-21
24 NOTES Live Swivels D:6-22
Field Attachable Fittings
Field Attachable Fittings, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 30 673 DISCLAIMER Disclaimer The information and dimensions listed in these catalogues is correct to the
SECTION 15 Breakaway Couplers
SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers
Rapid push-in fittings for plastic tubes Series 1000
CATALOGUE > Release 8.5 > Rapid fittings Series 1000 Rapid push-in fittings for plastic tubes Series 1000 Tube external diameters: 5/3, 6/, 8/6, 10/8, 12/10, 15/12,5 mm Fittings threads: metric (M5, M6,
Betabite Fittings. Hardy Spicer, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph:
Betabite Fittings, 1/9 Monterey Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 30 673 Disclaimer The information and dimensions listed in these catalogues is correct to the best of our knowledge
PRODUCT OVERVIEW. Hydraulic Couplings and Valves
PRODUCT OVERVIEW Hydraulic Couplings and Valves www.holmbury.com www.holmbury.com HQ & H Series Flat face made to the ISO 16028 Standard H90 Series 90 Flat face made to the ISO 16028 Standard Body Sizes
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
for plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
A PREMIER SERIES FLAT FACE COUPLERS ISO Interchange
A PREMIER SERIES FLAT FACE COUPLERS ISO 16028 Interchange The A Premier Series Flat Face ISO 16028 Interchange Couplings offer higher pressure ratings, superior flow characteristics, and lower pressure
PRODUCT OVERVIEW. Hydraulic Couplers and Valves
PRODUCT OVERVIEW Hydraulic Couplers and Valves www.holmbury.com www.holmbury.com HQ Series Flat face made to the ISO 16028 H90 Series 90 Flat face made to the ISO 16028 Thread Sizes - 1/4-1 BSP, NPT, SAE,
BRASS AIR FITTINGS: E-01 RYCO BLOW GUNS BRASS AIRLINE TYRE INFLATORS REGULATORS OETIKER COUPLINGS
RYCO GAUGES NITTO BLOW GUNS TYRE INFLATORS REGULATORS BRASS AIRLINE OETIKER COUPLINGS 70 BRASS AIR FITTINGS & COUPLINGS 72... MALE HOSETAIL (NO P3) SWIVEL HOSETAIL (NO SP3) NUT & TAIL (NO P5) MALE ELBOW
CAT GB. Quick-release couplings for Diagnosis. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0117-GB Quick-release couplings for Diagnosis UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949 Quick-release couplings for Diagnosis Features Applications Benefits Recoendations Interchangeable according
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
THE TOUGHEST SWIVELS ON THE MARKET
THE TOUGHEST SWIVELS ON THE MRKET PRODUT TLOG www.taimi.ca / + 1 418 686 6868 HOW TO ORDER SZ J 16 M J 16 M ODY ONFIGURTION SZ = IN-LINE SWIVEL SZ90 = 90 o SWIVEL SHNK THRED J = JI (37 ) F = NPT P = SPP
?????? Part No Part No. 20SF 30SF 40SF 20SM 30SM 40SM 20SH 30SH 40SH. Part No.
Jamec Pem 310 Series Couplers Single button operation. Will pass approximately 30cfm at 100psi. Jamec Pem 330 Series Adaptors?????? 13.0980 13.0985 13.0990 13.0950 13.0965 13.0970 13.0975 13.0930 13.0935
Group 14. Quick Release Couplings High pressure
Group 14 Quick Release s High pressure 14 INDEX Page Contents 2 Index 3 Technical information Tema Quick Release s Hydraulic Series 4 Tema Series 2500 for Hydraulic 5 Tema Series 3800 for Hydraulics 6
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
Reels & Nozzles Jamec Pem 1
Jamec Pem Air Hose Reels Jamec Pem provide a variety of hose reels to cover most uses. The range includes models with a Stop Anywhere + Slow Return function for easy hose length control. Fully enclosed
CVH103P. Check Valve Series CVH103P. Technical Information. General Description
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths
Flat Face. Flat Face. Series: A Premier Interchange: ISO ISO Interchange Couplings
ISO 16028 Interchange Couplings Flat Face Overview A or Premier series offers higher pressure ratings, superior flow ratings, lower pressure drop compared to FIRG series or competitors products. Flat Face
Test Point Plugs Section
Test Point Plugs S e c t i o n 11 Test Point Plugs (European Interchangeable) These Test Point Plugs are designed to be complementary to and interchangeable with similar equipment from other manufacturers
HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors)
HIGH PRESSURE HYDRAULICS (Hose, Coupling, Pressure Gauges, Adaptors) HIGH PRESSURE THERMOPLASTIC HOSES As the specialist in the manufacturing of high pressure hoses, we are poised to achieve exceptional
HOW TO SPECIFY PIRTEK HOSE TAILS
HOW TO SPECIFY PIRTEK HOSE TAILS Hose Tail Part Number C629L-2016X Tail Series / Dash Size stamped on 1-piece crimp fittings Configuration Angle Type - Fitting Size Hose Size Series C62 9 L - 20 16 X End
P: E: W: 1 of 20 MEG DS 034 A
McMillan Engineering Group designs and manufactures a complete range of standard and custom IHS Jacking Equipment to suit all of your construction needs. 1 of 20 MEG DS 034 A Index IHS Double Acting Cylinders...
Thermoplastic Hoses. Polyflex/Parflex. Polyflex Presto
Thermoplastic Hoses Motors Valves Actuators Accumulators Filtration Polyflex/Parflex Thermoplastic Hoses for Hydraulic Applications Polyflex Presto Tubing for Pneumatics For pressures up to 700 bar. Single
TRI-LOBULAR INSERT BITS 1/4" HEX DRIVE Length Pack Bordo Price Code MM Qty Code Each TRI-LOB TLx25
SCREW DRIVER BITS PHILLIPS INSERT BITS 27020 No.1 25 10 EXTRA HARD 2607001510 27021 No.2 25 10 EXTRA HARD 2607001514 37514 No.2 50 10 EH R/SHK 37515 No.2 75 10 EH R/SHK 27207 No.3 25 10 5/16 HEX DR 27022
Part/Assy 7527 ECN Ref S000000
Parts List Description Exhaust Manifold,Side Outlet(*) Part/Assy 7527 ECN Ref S000000 SAP Item Illustration RTP RTS Part No Catalogue No / Description Qty ECN 0001 1 X X 36609 MANIFOLD, EXHAUST, 4 CYL,
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS
4200/4400 ONE-PIECE NON-SKIVE COUPLINGS 4200/4400 couplings have been engineered to match a wide range of latest generation hose types to provide assemblies that meet the highest global standards. Ferrules
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
AIR EQUIPMENT From filters to compressed air dryers to air piping solutions, we have a range of products from recognised brands that are built tough
AIR EQUIPMENT From filters to compressed air dryers to air piping solutions, we have a range of products from recognised brands that are built tough and are backed by our 24/7 service guarantee. ISO8573-1:2010
Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves
Stainless Steel Ball Valves Gemels 34.1.1 GE2 2-WAY HIGH PRESSURE BALL VALVES GE2 stainless steel GE2 G 1/2 DN13 4 4 4 4 A B Type and way of valve GE2 2-way high pressure ball valves Valves dimension of
Product Tips and Features
5.00.01 anifolds & Valve Packs Product Tips and Features Circuits Relief from P to T are designed to provide a means to connect a single solenoid valve to field piping either on the power unit or near
Accessories. Hardy Spicer, Discovery Road, Dandenong South, Victoria, 3175 Toll free Ph:
hardy spicer HOSE FITTINGS DRIVESHAFTS Accessories, 17-31 Discovery Road, Dandenong South, Victoria, 3175 Toll free Ph: 1300 304 673 DISCLAIMER Disclaimer The information and dimensions listed in these
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
Hydraulic Fittings. Design, Manufacture, Distribution
Hydraulic Fittings Design, Manufacture, Distribution Hydraulic Fittings are exclusively distributed by Beaumanor Engineering Ltd of Leicester and manufactured by Balu Auto Components of Chennai India,
funnels, measures, gravity cocks, jerry cans and oil suction pumps...
funnels, measures, gravity cocks, jerry cans and oil suction pumps lubrication AND ACCESSORIES grease nipples............................................................ GREASE CONNECTORS........................................................
BC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural
1 SERI ISO-A Manufactured according ISO 7241-A norm, size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials Body:
MULTI-K TOP COAT MULTI-COUPLING MULTI COUPLING. Tailor-made according to customer s needs Compact, reliable and safe PATENT PENDING
MULTI-K MULTI-COUPLING TOP COAT 107 PATENT PENDING DN 10 to 19 Tailor-made according to customer s needs Compact, reliable and safe 250 bar General features: ARGUS multi-couplings, which consist of a fixed
Hydraulic Products. For Clean and Leak-free Hydraulic Systems. Hydraulics
Hydraulic Products For Clean and eak-free Hydraulic Systems Hydraulics Hydraulic Range The Key to eadership is our Mindset We have maintained our roots in the heart of Sweden throughout our expansion to
Dust Caps Plastic with wire harness
Screw-to-connect Couplings TLX Range COUPLINGS AND NIPPLE Body Size Connection Part No. Dimension locking Weight sleeve ex Coupling Nipple Zoll Dash Description Type Standards Coupling Nipple (mm) (inch)
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
Quick release couplings
Quick release couplings G BSIS ON QUIK RELESE OUPLINGS Hydraulic omposed of two bodies, the female or socket and the male or plug. When connected by pushing the two parts the valves open and the flow starts
STAUFF. Test. Local solutions for individual customers worldwide
STAUFF Test ocal solutions for individual customers worldwide Walter Stauffenberg mbh & Co. K P.O.Box 745 58777 Werdol ermany Im Erenfeld 4 5879 Werdol ermany Telepone: + 49 2392 96-0 Facsimile: + 49 2392
Breathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
VALVES/COUPLINGS INDEX
Click on Produce Code / Description to Be Linked to That Page Safe Practice Requirements for H.P. Ball Valves 3 SLV / SSV Lockable Ball Valves 4 CLBV Clipline Ball Valve 7 SPBV Threaded BSPP Ball Valve
Quick Release Couplings. Section 15
Quick Release s Section 15 15-1 INFORMATION - QUICK - QUICK RELEASE COUPLINGS GENERAL INFORMATION Quick release couplings are primarily designed to allow quick and easy connection and disconnection of
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression
Microbore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
MULTI-COUPLING PLATES
MULTI-COUPLING PLATES MP Series Hydraulic Multi-Coupling Plate Overview - Front end loaders - Harvesting equipment - Construction machinery - Refrigeration - Snow removal equipment - Energy sector - Any
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
Hose Information. Pressure 376 Vacuum 376
HYDROSCAND Technical Information Table of Contents Hose Information Page Hose Dimensioning 362 Flow Diameter 363 Installation examples 364 Calculation of Hose Length 365 Working Pressure, hydraulic hoses
A Z. Safe Practice Requirements for H.P. Ball Valves. SLV / SSV Lockable Ball Valves. CLBV Clipline Ball Valve. SPBV Threaded BSPP Ball Valve
Safe Practice Requirements for H.P. Ball Valves SLV / SSV Lockable Ball Valves CLBV Clipline Ball Valve SPBV Threaded BSPP Ball Valve Ball Valve Accessories Large Bore / Flanged / Stainless Steel Ball
ISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
Hyva Hoses & Adapters Introduction
Introduction Hyva Hoses Hoses offered by HYVA comply with the highest safety standards for truck hydraulics. Working pressures range from 225 to 350 bar. Code system hydraulic hoses Hose 1 H.P. 16-2000
HOW TO SPECIFY PIRTEK HOSE TAILS
HOW TO SPEIFY PIRTEK HOSE TAILS Hose Tail Part Number 629L-2016X onfiguration Angle Type - Fitting Size Hose Size Series 62 9 L - 20 16 X End configuration and angle are listed on the next page 1 = straight
Catalogue 6 STAUFF Valves
Two-Way Ball Valves Multi-Way Ball Valves Flow Control and Check Valves Gauge Isolator Valves Catalogue 6 STAUFF Valves Germany Walter Stauffenberg GmbH & Co. KG Im Ehrenfeld 4 58791 Werdohl Tel.: +49
Macro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Foreword Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed.
Catalog Hydraulic Couplings High Pressure
High Pressure 3 Series Threaded Actuation Design Threaded Sleeve The 3 Series coupling are designed for high pressure applications. The coupler sleeve and nipple body must be manually threaded together
AIR OPERATED OIL PUMPS AND KITS
PM 2 PumpMaster 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. Model 24 PumpMaster 2, : ratio stub
quality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
Test Coupling with Ball Check
Test 15 Connection Tread Introduction SMK15 Test Coupling wit Ball Ceck Test Coupling SMK15 Internal Ball Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast coupling for Monitoring
KOMATSU 30 Flare (Metric Threads)
KOMATSU 30 Flare (Metric Threads) KOMATSU (JIS 30 Flare Metric Thread) Connections / Identification JIS 30 Flare connections include series of inch (BSP) threads and metric threads. This section is dedicated
VISIT OUR DISTRIBUTION & OPERATIONS CENTER
PUSH IN FITTINGS P V. P. W, P. V. W,, V,. T V I I, USA. W 75% ', V. I, V 300 USA P, M S D, C A, A M, F. T, V P. VISIT OUR DISTRIBUTION & OPERATIONS CENTER Vacuforce LLC 933 Western Drive Indianapolis IN
MARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
Edition 7 February QA4 Air Angle Wrench and Nut Runner. Parts Information. Save These Instructions
80603 Edition 7 February 0 QA Air Angle Wrench and Nut Runner Parts Information Save These Instructions Module - Exploded View 8 7 5 6 8 3 0 9 9 5 0 5 53 5 7 55 3 0 56 57 6 7 5 3 33 3 8 9 6 63 6 65 66
PART LIST P T O P T O S E R I E S S E R I E S
PART LIST P T O 1 0 0 0 S E R I E S P T O 2 0 0 0 S E R I E S Bezares U.S.A. PART LIST & TABLE 1 Nov. 2017 Bezares U.S.A. PART LIST & TABLE 2 Nov. 2017 PTO 1000 & 1010 Series SAE B 2/4 Bolt PART 1 4 Screw
CB50E Controls & Components
CB50E Controls & Components Out of Electrical Phase Warning Light Hour Meter Electrical Phase Solector Switch Belly Box Harness Connection Travel Direction Polarity Switch Cutting Arm Polarity Switch Arm
IGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
QUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
THE PERFECT CONNECTION BETWEEN ROTATING HOSES AND STATIONARY PARTS
ROTAPOINT COUPLINGS THE PERFECT CONNECTION BETWEEN ROTATING HOSES AND STATIONARY PARTS ROTAPOINT COUPLINGS WHAT IS A ROTAPOINT COUPLING? The ROTAPOINT swivel prevents torsion in the hose and extends the
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with an aluminum head. Choice
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM
LOW PRESSURE FILTERS MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol MF 80/85/160/180 MF 90/95/190/195 A A (Standard) (Suction) B B Features MF Filters are manufactured with
Build the future, prepare for LNG
LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner: LNG Vent Connections Male Quick Disconnect
Ferulok Flareless Bite Type Fittings
Flareless Bite Type Fittings Flareless SAE 080101 / Flareless Flareless SAE 080601 / Flareless Flareless SAE 080102 / NPTF Flareless SAE 080120 / SAE-ORB Flareless SAE 080103 / NPTF Flareless SAE 080221
Lubrication Systems. Section 26
Lubrication Systems Section 26 26-1 INFORMATION - SYSTEMS The Lincoln QuickLub is an automated and centralised lubrication system that can improve productivity and extend the service life of your plant.
Series 900 Minifolds. Aluminium Air Distribution Manifolds. Manifolds & Minifolds. Technical Specifications. hnl-uk.com. Series 900 Minifolds
Series 900 Minifolds Aluminium Air Distribution Manifolds Replace complex assemblies of valves and fittings with anodised aluminium MINIFOLDS., OR 20 OUTLETS COMPREHENSIVE RANGE ALSO AVAILABLE IN 36 STAINLESS
Technical Description The series 6600 couplings meet the requirements and dimensions of the ISO A standard.
ISO- Polígono Industrial Eitua, nº 52, Pab. 5-. 48240 BERRIZ (BIZKI) Tel.: 94 623 60 10 / Fax: 94 623 60 11 E-mail: airtalde@airtalde.es www.airtalde.es Ball ocking ISO Standard ISO ISO 7241-1 Series 1/4"
Low Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight
HYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
Quick-release couplings Series 5000
CATALOGUE > Release 8. > Quick-release couplings Series 5000 Quick-release couplings Series 5000 Nominal diameter ø 5 and 7 mm - Plastic tubes 6/, 8/6, 10/8 Rubber hoses 6x1, 8x17, 10x19, 13x23 Connections
Low Pressure Medium Pressure High Pressure Accessories Off-line Filtration
Front Donaldson Cover DeliversHeadline Should HYDRAULIC Be Centered SERVICE PARTS & In ACCESSORIES This Color Box GUIDE Low Pressure Medium Pressure High Pressure Accessories Off-line Filtration Donaldson
Complete Hydraulic Set System 100
Diagnostics System 100 Measuring-System System 100 Technical The design of the Tema System 100 allows the check of static and dynamic pressures as well as vacuum. With the integrated self-venting device
Lime Spreader. Model SL6. Illustrated Parts Breakdown. Front Hydraulics Rear Hydraulics Manifold Components. Spinner Assembly
Lime Spreader Model SL Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Front Hydraulics Rear Hydraulics Manifold Components Floor & Apron Axle Assembly Apron Drive
GE2 G 1/2 DN A B
GE2 +GE2 CARBON STEEL Type: ball valve GE 2 way Body: block Material: 1,0737 Ball seats: from DN4 up to DN25 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 500 Bar depending on valve size and seal s
PNEUMATIC RACK & PINION ACTUATOR
PNEUMATIC RACK & PINION ACTUATOR Automax S-Series DOUBLE ACTING SPRING RETURN 1 Integral travel stops in both directions with 10 degrees of overtravel to assure precise adjustment of both the open and
Spare parts list Pentruder Modular Drilling System
Spare parts list Pentruder Modular Drilling System Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M Pentruder Modular Drilling System, Column CN-0.5; 1.2; 1.5 F/M Page CN-F/M
FLAT FACE COUPLINGS FIRG SERIES FLAT FACE, QUICK RELEASE HYDRAULIC COUPLINGS PREMIER RANGE INTRODUCTION ADVANTAGES APPLICATIONS OPERATION
FLAT FACE COUPLINGS FIRG SERIES PREMIER RANGE INTRODUCTION Holmbury FIRG Series couplings were first introduced in 1982. Their early success was due to good performance, long life and competitive prices.
Quick Coupling Products. Catalogue 3800-IND/UK
Quick Coupling Products Catalogue 3800-IND/UK For your safety! Under certain circumstances, quick couplings can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. Only
Tillage System Model 46 Assembly Manual
46 Tillage System Model 46 Assembly Manual Revision E - September 2018 Fall Build Serial Number: Kelly Engineering PO Box 100 Booleroo Centre South Australia 5482 P +61 8 8667 2253 F +61 8 8667 2250 W
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Features MF Filters are manufactured with an aluminum head. MF, MFD, MFDS Series Spin-On Filters Choice of NPT, SAE straight thread O-ring boss, BSPP, and SAE 4-bolt flange porting to allow easy installation
Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
LubePro Series Pumps. For Simple, Injector-Based Automatic Lubrication Systems. The Choice of Lubrication Professionals
LubePro Series Pumps For Simple, Injector-Based Automatic Lubrication Systems The Choice of Lubrication Professionals As a hard-working professional focused on ensuring your production lines keep moving
Hydraulic & Offshore Supplies GE3 3-Way High Pressure Ball Valves Brochure YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE www.gemels.it
CONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
Q U I C K C O U P L I N G S, C O U P L E R A D A P T E R S & R E P L A C E M E N T T I P S Engineered, Machined and Assembled in the USA Since 1969
Q U I C K C O U P L I N G S, C O U P L E R A D A P T E R S & R E P L A C E M E N T T I P S Engineered, Machined and Assembled in the USA Since 1969 warning statement! WARNING Failure, improper use or improper
Low-Pressure Transportation and Hydraulic Hose and Fittings the right solution for special applications and requirements
Low-Pressure Transportation and Hydraulic and Fittings the right solution for special applications and requirements A wide range of different hose types rubber is available, with textile-braide fire-retardant
DISCOUNT TRACTOR PARTS.
HYDRAULIC PRODUCT CATALOGUE Published September 2012 Hydraulic Rams, Control Valves, Hydraulic Hose Reusable Hydraulic Fittings Hydraulic unions and Fittings Hydraulic Pumps DISCOUNT TRACTOR PARTS www.discounttractorparts.co.nz
Hydraulic Quick Fit Couplings
Section 2 Section 2 Hydraulic Quick Fit Couplings 1 Trailer & Tipper Brake Couplings 6 Flat Face Ball & Poppet Couplings 1 Wash Couplings - 350 Bar 7 Flat Face Couplings 1 Rotary Couplings incl St/ 8 Screw
White House Products Ltd
White House Products Ltd Issue 5 - Section 23 To view a gear pump, please click on the name below or use the bookmarks in your PDF software. To return to this page, please click on the red text in the