PRESS BRAKE TOOLS FAST CLAMPING SYSTEMS, ADAPTERS, SERVICE/MODIFICATION, SHEAR BLADES, ACCESSORIES

Transcription

1 PE BKE TOOL FT CLMPING YTEM, DPTE, EVICE/MODIFICTION, E BLDE, CCEOIE

2 OLLEI WELCOME to the new olleri catalogue! olleri is one of the few real manufacturers of press brake tools not a reseller and not a dealer. Therefore we emphasize great importance as being producer of press brake tools to bring you further advantages. no margin division direct access to the production direct communication, not only by specific and special bending tools. TE PODUCTION ll production phases are certified and up to quality check standards and safety regulations. Thereby we guarantee you consistent high quality with modern CNCmachines. ll tools are laser marked with a serial number. Thus, allowing every single tool to be identified and easily tracked for reproduction. This is what we call accurate repitition. Competent and truthful statement about prices and delivery times without tedious queries! Convince yourself of our service and quality of tools! TE COMPNY ince 987 we have been producing standard and special tooling. The family owned company (Francesco and Marco olleri) can nowadays be considered one of the largest press brake tooling manufacturers in Europe. We are internationally available with our branches olleri Brasil, olleri U, olleri India, olleri Deutschland Gmb, olleri China, olleri Ukraine and olleri Benelux, for you to utilize our global experiance and footprints. We offer fast and reliable service through our partners in all of Europe. In 2, we have completely restructured our facilities internally. The focus of direct sales structures in the individual countries has greatly improved. We present to you, a new expanded portfolio, a significantly enlarged stock, new corporate design, and a completely new catalog that you now hold in your hands. Our promise to an alternative for you Worlwide. TE WEOUE We at olleri, have a wide stock ranging over more than, press brake tools. Therefore, we hold one of the largest in house stocks in all of Europe. For you this means a vast amount of tools to choose from ready to be shipped all around the world. Look for this symbol in the catalogue! TE TEM The olleri team is made up of all ages. We are innovative, dynamic and experienced, with consistency and harmony. Our mission is to bring you the best results in tool production. t olleri teamwork is the key to achieve outstanding customer service, research and development, great warehouse efficiency, and vast productivty. The exceptional atmosphere in our facilities always has a positive impact on our products. olleri Videos Company Presentation company-rolleri TE EVICE We understand that finding the right tool for the right application is of your importance. Thus, we have invested hard work into our quality service: Consulting, Technical assistance, Training for your bending specialists, this is our daily business bringing you great support! Check out our website: also this is customer service: olleri provides you with immediate production after a purchase has been made to ensure the fastest delivery time! 2 3

3 OLLEI Professional Bending TE CONTUCTION Besides constructing many special tools, our research and development team also innovates special clamping systems which increases your productivity. Technicians and Engineers develop for you solutions which are economic and practical. TE W MTEIL The raw material is obtained from qualified suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength. We work with highly complex 3D simulation models and are capable to create bending examples of various profiles. Inquire with us today! TE QULITY olleri IO 9:8 certified. To be your choice supplier means much more to us; together we can find the best and most economic tool and develop a vast number of bending solutions. We also offer training for your employees in the bending department. These are qualities, where we are glad to assist you along with our extravagant number of bending products. TE PE BKE TOOL olleri manufactures all tools in their own production facilities. We put great importance into our precision grinding, guaranteeing accurate reproduction of tools, exact concurrency. We induction harden all tools at 54-6 c to get the best results for your punches and dies. Each tool is subjected to quality control and then provided with a serial nummer to simplify and guarantee tracking. TE QULITY CONTOL n extra quatlity control department reviews and tests every single tool after a complete production cycle. Every tool is given a serial number and batch number, after being carefully examed. This process guarantees a % retracing possibility of the tool. Of course olleri also guarantees accurate reproduction, high-quality material, induction hardening, and precision grinding. QuickLock INNOVTION olleri produces for many press brake manufacturers the clamping systems - whether they are hydraulic, pneumatic, or manual. Our new QuickLock-ystem, compatible for our olleri Type 2 or our new OL for olleri Type, are all new developments from olleri which are manufactured in our production facilities. OL 4 5

4 PUNCE OLLEI TYPE DIE OLLEI TYPE PUNCE OLLEI TYPE 2 DIE OLLEI TYPE 2 PUNCE OLLEI TYPE 3 Compatibility Tools olleri Type are compatible with press brake machines from: CL, ccurpress, M Machinery, mada, tlantic, dira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, aco, industan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, ico, afan, alvagnini, chiavi, MD, org, omo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc. Tools olleri Type 2 are compatible with press brake machines from: ämmerle-bystronic, LVD, Trumpf or on press brakes with ystem NCL (New tandard Clamping) Tools olleri Type 3 are compatible with press brake machines from: - Bystronic-Beyeler F - Bystronic-Beyeler F - Bystronic-Beyeler - Bystronic-Beyeler Tools olleri Type X are compatible with press brake machines from: ET, Weinbrenner, merican, Gasparini, jial-xial, Colgar, LVD, Colly, ämmerle-bystronic, etc. With dapter-ystems the tools olleri Type -X are also applicable on all other press brake machines. DIE OLLEI TYPE 3 TOOL OLLEI TYPE X OLLEI DIE OLL-V OLLEI CLMPING YTEM OLLEI DPTE OLLEI MK FEE BENDING OLLEI PECIL ND EVY DUTY TOOL OLLEI EVICE / MODIFICTION OLLEI E BLDE / CCEOIE

5 PUNCE OLLEI TYPE Content Explanation - 9 Punches egmented Punches with Mobile orns 3 Punches - 8 egmented Punches with Mobile orns 8 Punches for closed profiles 9 Punches Punches 22 7 Punches 22 6 Punches Punches Punches 26 3 Punches Punches /24 emming tools 28 Z-Profile Tools 29 adius tools 3-33 emming tools 33 Punch extensions / Intermediates Intermediates, eavy duty 35 Punch adapters 35 Compatibility Punches olleri Type are compatible with press brake machines from: CL, ccurpress, M Machinery, mada, tlantic, dira, Baykal, BL, Boschert, Boutillon, Bystronic- Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, aco, industan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, ico, afan, alvagnini, chiavi, MD, org, omo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc. With dapter-ystems the punches olleri Type are also applicable on all other press brake machines.

6 OLLEI TYPE Content Explanation Punches Compatibility Punches olleri Type are: compatible with press brake machines from: CL, ccurpress, M Machinery, mada, tlantic, dira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, aco, industan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, ico, afan, alvagnini, chiavi, MD, org, omo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc. also applicable on all other press brake machines with adapter-systems (see pages 22-27). Material The raw material is obtained from qualified suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength. pecifications for the maximum press force kn/m are indicated as such, t = kn. own production facilities (no reseller or dealer) tracking of every tool possible, with a unique serial number on every article after the quality control check. precision grinding (tolerance of +/-. mm) guaranteed tool reproduction exact parallelism precise, consistent working height tang retrofitting and modifications possible (see pages ) very large stock availability Material Type Mechanical resistance of the material ardness of the operating surfaces ardness of the material and the tool body and the tool body after induction hardening 42CrMo4 9-5 N/mm C 54-6 C C N/mm C 54-6 C ll punches olleri Type : are standardized with a 8.4 x 3.5 mm (.33 x.38 in) safety groove, that keeps the tool from falling out. depending on the clamping system: horizontal or vertical, tool exchange is possible (see pages 98-5) Our dvantages Your Convenience Tang Modifications from afety Grooves Groove in addition to 8.4 x 3.5 mm (.33 x. in) (.5) 3 7 (.28) groove for: (.) (.) Pneumatic clamping 3 3 (.5) 8.4 (.33) (.39) 3 (.8) 22 (.87) 6 Groove in addition to 8.4 x 3.5 mm (.33 x. in) (.5) 3 7 (.28) groove for: (.) (.6) olleri Type 3 Bystronic- Beyeler Euro afan 3 (.5) 8.4 (.33) (.55) 3 (.8) (.24) 6 37 OLLEI TYPE Content Explanation Punches tandard orn 85 mm () (3.29 in) 8 mm (3.5 in) orn orn Tool lengths and sectioning olleri TOP-ystem (.) 3 (.5) 8.4 (.33) 3 (.5) α 7 (.28) 3 (.8) (.5) 3 7 (.28) (.) (.6) 3 (.5) 8.4 (.33) (.55) (.24) 6 (.55) (.24) 6 3 (.8) 25 (.98) (.5) 3 7 (.28) 3 (.8) 3 (.8) 25 (.98) 8 4 (.5) 3 7 (.28) (.6) 4 45 (.39) (.) 5 5 (.59) 3 (.8) egmented tools are delivered in complete sets. ingle pieces are also available! More lengths and sectionings are possible upon request. orn orn orn (.79) 25 (.98) 9 (.35) 495 mm (9.49 in) 3 (.8) (.79) 3 (.5) 35 (.38) 5 (.97) (.39) 35 (.38) 25 (.98) (.39) (.39) (.79) mm (32.87 in) 45 mm (6.34 in) 9 mm (35.43 in) 85 mm () (9 segments) (3.29 in) ( segments) 8 mm (3.5 in) (9 segments) 525 mm (.67 in) afety groove Indications of precision ground surfaces: Press force surface Press force line Groove in addition to 8.4 x 3.5 mm (.33 x. in) groove and shortened tang for: olleri Type 3 Bystronic- Beyeler Euro afan Modified groove for: olleri Type 3 Modified groove for: olleri Type 3 (.5) 3 7 (.28) (.6) 4 Groove for: hydraulic clamping Gasparini Modified groove for: olleri Type 3 (.5) 3 7 (.28) 4 (.6) (.55) 3 (.8) (.24) 6 More modifications possible upon your request! Give us a call or send us an inquiry! orn Types 495 mm (9.49 in) (8 segments) 5 mm (9.68 in) (.79) 8 (.3) 2 (.47) 8 (.7) orn tandard for all segm. Punches olleri Type orn 2 TOP for all segm. TOP Punches olleri Type orn 3 for punches: orn 4 for punches: 9 96 orn orn 5 for punches: 3 3 (.8) 5 (.97) 2 (.47) 35 (.38) orn 6 for punches: 3 orn 5 mm (9.68 in) (3 segments) B orn individual produced according to your specifications Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location.

7 PK / P OLLEI TYPE 9 4 (.5) PK / kn/m max. kn/m max. 9 9 (.35) 9 Punches 9 Punches PK P =66.8 / =96.8 / =.6 (=2.63 / =3.8 / =.24) 835 mm in.5 kg 45 mm 6.34 in 5.2 kg 85 mm 3.29 in. kg. kg =66.8 / =96.8 / =.25 (=2.63 / =3.8 / =.) 835 mm in.5 kg 45 mm 6.34 in 5.2 kg 85 mm 3.29 in. kg. kg PK PK =66.35 / =96.35 / =.8 (=2.6 / =3.79 / =.3) 835 mm in. kg 45 mm 6.34 in 5.5 kg 85 mm 3.29 in.5 kg.5 kg =66.6 / =96.6 / =.25 (=2.62 / =3.8 / =.) 835 mm in. kg 45 mm 6.34 in 5.5 kg 85 mm 3.29 in.5 kg.5 kg P / 25 OLLEI TYPE 35 kn/m max. =. / =3. / =.6 (=3.94 / =5.2 / =.24) 835 mm in.5 kg 45 mm 6.34 in 5.7 kg.9 kg. kg =. / =3. / =.25 (=3.94 / =5.2 / =.) 835 mm in.5 kg 45 mm 6.34 in 5.7 kg.9 kg. kg PK / Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm (.3) 6 P P (.4) 6 PK PK kn/m max. =.35 / =34.35 / =.8 (=4. / =5.29 / =.3) 835 mm in 23. kg 45 mm 6.34 in.5 kg 2.9 kg 22.2 kg =.6 / =34.6 / =.25 (=4.2 / =5.3 / =.) 835 mm in 23. kg 45 mm 6.34 in.5 kg 2.9 kg 22.2 kg PK..9.6 (4.49) (3.3) 6 kn/m max. 835 mm in. kg 45 mm 6.34 in 7. kg 3.3 kg 3.5 kg 42Cr: 9-5 N/mm 2 PK (4.57) (3.38) 6 kn/m max. 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg 9 egmented Punches with Mobile orns rea of pplication for easy bending of special box profiles 9.6 (.2) 7 (.28) 9.8 (.3) 9 (.35) olleri Videos mobile horn demonstration at: videos/mobile-horns DK (4.57) 86 (3.39) 9.8 (.39) (.3) 5 kn/m max. 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.4 kg PK..9.8 / (.39) 6 PK..9.8 PK kn/m max. =89.35 / =9.35 / =.8 (=3.52 / =4.7 / =.3) 835 mm in 2. kg 45 mm 6.34 in.5 kg. kg.2 kg =89.6 / =9.6 / =.25 (=3.53 / =4.7 / =.) 835 mm in 2. kg 45 mm 6.34 in.5 kg. kg.2 kg C.M (2.6) (.39) (.79) 25 (.98) C.M (5.9) 9.25 (.) 35 (.38) 5 kn/m max. per pair 3.5 kg Pair left/right compatible with PK per pair 5 kn/m max. 3.5 kg Pair left/right compatible with PK olleri Videos find updated and helpful videos at: videos/overview s Please note that delivery time varies according to your location (2.62) (.39) (.79) 25 (.98) 5 (5.9) 9.25 (.) 35 (.38) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 2 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 3

8 OLLEI TYPE OLLEI TYPE Punches Punches P (3.75) (2.57) 3 (.2) 9.4 (.37) kn/m max. 835 mm in. kg 45 mm 6.34 in 5.5 kg.5 kg.6 kg P (4.53) 85 (3.35).6 (.24) 6 3 kn/m max. 835 mm in 6. kg 45 mm 6.34 in 3. kg 5.7 kg 5.8 kg 42Cr: 9-5 N/mm 2 D / (.39) 6 D D kn/m max. =86. / =6. / =.8 (=3.39 / =4.57 / =.3) 835 mm in.9 kg 45 mm 6.34 in 5.8 kg.3 kg.5 kg =85. / =5. / =3. (=3.35 / =4.53 / =.8) 835 mm in.9 kg 45 mm 6.34 in 5.9 kg.3 kg.5 kg P / 25 P / PK (.6) 8.9 (.35) 42Cr: 9-5 N/mm 2 P P P PK kn/m max. =67. / =97. / =.6 (=2.64 / =3.82 / =.24) 835 mm in 9.5 kg 45 mm 6.34 in 5. kg 9. kg 9.2 kg 9 mm in. kg =66.95 / =96.95 / =.25 (=2.64 / =3.82 / =.) 835 mm in 9.5 kg 45 mm 6.34 in 5. kg 9. kg 9.2 kg 9 mm in. kg kn/m max. =66.65 / =96.65 / =.8 (=2.62 / =3.8 / =.3) 835 mm in. kg 45 mm 6.34 in 5.5 kg.6 kg.7 kg 9 mm in.9 kg =66.6 / =96.6 / =.25 (=2.62 / =3.8 / =.) 835 mm in. kg 45 mm 6.34 in 5.5 kg.5 kg.6 kg 9 mm in.8 kg (3.82) 2 / 43 kn/m max (2.63).2 (.8) 4 (.6) 9 (.35) 2 43 kn/m max. 835 mm in.7 kg 45 mm 6.34 in 5.3 kg.2 kg 8 mm 3.5 in.3 kg 42Cr: 9-5 N/mm 2 3 =66.9 / =96.9 / =.2 (=2.63 / =3.8 / =.8) 835 mm in. kg 45 mm 6.34 in 5.5 kg 8 mm 3.29 in 3.5 in 3.5 kg.5 kg =65.68 / =95.68 / =3 (=2.59 / =3.77 / =.8) 835 mm in. kg 45 mm 6.34 in 5.5 kg 8 mm 3.29 in 3.5 in.5 kg.5 kg P (4.57) 86 (3.39),8 (.3) 9 (.35) 6 kn/m max. P / P / PK (.39) 6 P mm in 2. kg 45 mm 6.34 in 6. kg.4 kg.5 kg P (4.7) 89.7 (3.53).8 (.3) 6 (.24) 6 45 kn/m max. =89.65 / =. / =.8 (=3.53 / =4.72 / =.3) 835 mm in 2. kg 45 mm 6.34 in.5 kg 85 mm 3.29 in. kg.2 kg P =88.5 / =8.5 / =3. (=3.48 / =4.67 / =.8) 835 mm in 2. kg 45 mm 6.34 in.5 kg 85 mm 3.29 in. kg.2 kg PK mm in 7. kg 45 mm 6.34 in 8.4 kg 6.2 kg 6.4 kg 6 kn/m max. =89.6 / =. / =.25 (=3.53 / =4.72 / =.) 835 mm in 2. kg 45 mm 6.34 in.5 kg. kg.2 kg 3 kn/m max. P kn/m max. 9 / 96 5 kn/m max (3.93) 69.9 (2.75).2 (.8) 8 (.3) 835 mm in 7.9 kg 45 mm 6.34 in 3.9 kg 7.5 kg 8 mm 3.5 in 7.6 kg 42Cr: 9-5 N/mm 2 4 (4.49) 84. (3.3),6 (.24) 7 (.28) mm in 5.6 kg 45 mm 6.34 in 7.7 kg.8 kg 5. kg 42Cr: 9-5 N/mm (.24) =94.9 / =24.9 / =.2 (=3.74 / =4.92 / =.8) 835 mm in 9. kg 45 mm 6.34 in 4.5 kg 8 mm 3.29 in 3.5 in 42Cr: 9-5 N/mm kg 8.6 kg =94.74 / =24.74 / =.6 (=3.73 / =4.9 / =.24) 835 mm in 9. kg 45 mm 6.34 in 4.5 kg 8 mm 3.29 in 3.5 in 8.5 kg 8.6 kg P (4.92) 95 (3.74) 6 (.23),25 (.) kn/m max. 835 mm in 9. kg 45 mm 6.34 in 4.5 kg 8.5 kg 8.6 kg 42Cr: 9-5 N/mm 2 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 5

9 OLLEI TYPE OLLEI TYPE Punches Punches 3 kn/m max. 835 mm in. kg 45 mm 6.34 in 5. kg 9.5 kg 8 mm 3.5 in 9.6 kg 29.9 (5.) 99.9 (3.93).2 (.8) 6 8 (.3) 6 42Cr: 9-5 N/mm 2 4 P / PK (.3) 6 P PK kn/m max. =. / =3. / =.6 (= 3.94 / =5.2 / =.24) 835 mm in 9.8 kg 45 mm 6.34 in 4.9 kg 9.3 kg 9.4 kg 9 mm in.5 kg =99.95 / =29.95 / =.25 (=3.94 / =5.2 / =.) 835 mm in 9.7 kg 45 mm 6.34 in 4.8 kg 9.2 kg 9.3 kg 9 mm in.4 kg P / 3 42Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm (.33) P P kn/m max. =. / =5. / =.8 (=4.72 / =5.9 / =.3) 835 mm in 2.5 kg 45 mm 6.34 in.5 kg.4 kg.7 kg 9 mm in 23. kg =9. / =9. / =3. (=4.69 / =5.87 / =.8) 835 mm in 2. kg 45 mm 6.34 in.5 kg 9.9 kg.2 kg 9 mm in 22.6 kg P (5.9) (4.72).6 (.24) 8 (.3) kn/m max. 9 mm in 2.9 kg 45 mm 6.34 in 5.9 kg 2.2 kg 2.4 kg 42Cr: 9-5 N/mm 2 P / 25 3 (5.2) (3.94) (.33) 6 P P kn/m max. =. / =3. / =.8 (=3.94 / =5.2 / =.3) 835 mm in. kg 45 mm 6.34 in 7. kg 3.3 kg 3.4 kg =. / =3. / =.25 (=3.94 / =5.2 / =.) 835 mm in 3.7 kg 45 mm 6.34 in 6.8 kg 3. kg 3.2 kg P / 3 / PK (.42) 6 P P PK kn/m max. =.65 / =34.5 / =.8 (=4.2 / =5.3 / =.3) 835 mm in 22.5 kg 45 mm 6.34 in.2 kg 2.4 kg 2.7 kg =3. / =33. / =3. (=4.7 / =5.25 / =.8) 835 mm in 22.5 kg 45 mm 6.34 in.2 kg 2.4 kg 2.7 kg =.6 / =34.5 / =.25 (=4.2 / =5.3/ =.) 835 mm in 22.7 kg 45 mm 6.34 in.5 kg 2.6 kg 2.8 kg P (5.9) (4.72) (.24).25 (.) 6 5 kn/m max. 9 mm in. kg 45 mm 6.34 in 4.6 kg 9.5 kg 9.6 kg kn/m max. 835 mm in 26. kg 45 mm 6.34 in 2.9 kg 24.8 kg 8 mm 3.5 in 24.9 kg 42Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm 2 5 (5.9) (4.72).2 (.8) 9 (.35) P kn/m max. 835 mm in 22. kg 45 mm 6.34 in 2.5 kg.9 kg 2.2 kg P kn/m max. 835 mm in 25. kg 45 mm 6.34 in.5 kg 23.8 kg 24. kg P kn/m max. 835 mm in 35. kg 45 mm 6.34 in 7.5 kg 33.3 kg 33.7 kg 34.5 (5.3).65 (4.2) (4.2) 34.5 (5.3) 75 (6.89) 5 (5.7) 6.8 (.3).8 (.3) 8 (.39) 6 (.249 (.39) (.39) 6.8 (.3).7 (.42) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 6 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 7

10 OLLEI TYPE OLLEI TYPE Punches Punches for closed profiles P kn/m max. 835 mm in 4. kg 45 mm 6.34 in.4 kg 39. kg 39.5 kg P kn/m max. 835 mm in 4.8 kg 45 mm 6.34 in.8 kg 39.7 kg.2 kg 9 mm in 45. kg PE. 5 kn/m max. per piece 7. kg 42Cr: 9-5 N/mm 2 95 (7.68) 65 (6.5) (7.74) 66.6 (6.56) 6 7 (2.76) 3 (.8) 7 (2.76) 8 8 (4.33).8 (.3) 3 (.5) 6.6 (.24) 9 (.35) 6.8 (.3) >38 (.5) >38 (.5) 48 (.89) egmented Punches with Mobile orns rea of pplication for easy bending of special box profiles olleri Videos mobile horn demonstration at: videos/mobile-horns C.M kn/m max (2.62) (.39) (.79) 25 (.98) 5 (5.9).8 (.3) 35 (.38) per pair 3.5 kg Pair left/right compatible with P s Please note that delivery time varies according to your location C.M kn/m max. per pair 3.5 kg Pair left/right compatible with PK (2.62) (.39) (.79) 25 (.98) 35 (.38) 5 (5.9).25 (.) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 8 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 9

11 P / PK (5.3).6 (4.2) P (5.2) (3.94) PK OLLEI TYPE 8.9 (.35).25 (.) 6 8 (.3) PK kn/m max. 6 kn/m max. 35 kn/m max. 42Cr: 9-5 N/mm (4.7) 89.6 (3.53) P..85. (4.72) 35 (5.3) 5 (4.3) 9 (3.54).8 (.3) (.39) 5 kn/m max. P kn/m max. 835 mm in 22.2 kg 835 mm in.9 kg 45 mm 6.34 in. kg 45 mm 6.34 in.4 kg. (.) 6 (.24) kn/m max. Punches Punches P PK =66.6 / =96.5 / =.8 (=2.62 / =3.8 / =.3) 835 mm in. kg 45 mm 6.34 in 5.5 kg 85 mm 3.29 in.4 kg.6 kg =65.45 / =95.45 / =3. (=2.58 / =3.76 / =.8) 835 mm in. kg 45 mm 6.34 in 5.5 kg 85 mm 3.29 in.4 kg.6 kg 835 mm in.5 kg 45 mm 6.34 in 5.7 kg.9 kg. kg 85 mm 3.29 in 2. kg 2.4 kg 835 mm in 2. kg 45 mm 6.34 in.5 kg 9.9 kg.2 kg P (5.3) 5 (4.3).8 (.3) TOP / 2 45 (.77) TOP / 2 46 (.8) 6 9. (.36).7 (.42) kn/m max. 835 mm in 3.5 kg 45 mm 6.34 in 6.7 kg 2.9 kg 3. kg 85 mm 42Cr: 9-5 N/mm in 42Cr: 9-5 N/mm kg. kg OLLEI TYPE TOP TOP TOP TOP mm in 7.7 kg 45 mm 6.34 in 8.5 kg 6.8 kg 7. kg 9 kn/m max. =5. / =75. / =.8 (=5.7 / =6.89 / =.3) 525 mm.67 in.9 kg 495 mm 9.49 in 9.7 kg 5 mm 9.68 in 9.9 kg =4.3 / =74.3 / =2. (=5.68 / =6.86 / =.79) 525 mm.67 in.9 kg 495 mm 9.49 in 9.7 kg 5 mm 9.68 in 9.9 kg 42Cr: 9-5 N/mm kn/m max. =75. / =5. / =.8 (=6.89 / =8.7 / =.3) 525 mm.67 in 24. kg 495 mm 9.49 in 22.6 kg 5 mm 9.68 in 22.9 kg =74.3 / =4.3 / =2. (=6.86 / =8.4 / =.79) 525 mm.67 in 24. kg 495 mm 9.49 in 22.6 kg 5 mm 9.68 in 22.9 kg 42Cr: 9-5 N/mm 2 2 P (6.87) 5 (5.7) 5 (4.53) 4.5 (5.69).8 (.3) TOP (.3) vertical 6 6 (.24) (.2) For a rapid vertical tool exchange, punches olleri Type can be equipped with the spring-loaded OL-ystem (% urcharge). etrofitted or new! ee pages kn/m max. 835 mm in 22.6 kg 45 mm 6.34 in.2 kg 2.5 kg 2.7 kg 42Cr: 9-5 N/mm 2 kn/m max. 525 mm.67 in 8.5 kg 495 mm 9.49 in 7.4 kg 5 mm 9.68 in 7.6 kg 42Cr: 9-5 N/mm (.3).6 (.42).8 (.3) 8.5 (.33) 9.5 (.37) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 2

12 OLLEI TYPE OLLEI TYPE 75 Punches P (3.84) 67.6 (2.66) 75.8 (.3) 9 (.35) kn/m max. 835 mm in. kg 45 mm 6.34 in 5.5 kg.4 kg.6 kg P (5.3) 5 (4.3) 6 6 kn/m max. 42Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm mm in 7.5 kg 45 mm 6.34 in 8.5 kg 6.7 kg 6.9 kg 6 Punches 3 kn/m max. 835 mm in 5. kg 45 mm 6.34 in 7.5 kg.2 kg 8 mm 3.5 in.4 kg 95 (3.74) 65 (2.56) 6 6 (.24) 6 P / 2 97 (3.82) 67 (2.64) (.49) P P kn/m max. =.8 (.3) 835 mm in 9. kg 45 mm 6.34 in 4.5 kg 8.5 kg 8.7 kg =2. (.79) 835 mm in 9. kg 45 mm 6.34 in 5. kg 8.5 kg 8.7 kg 75.8 (.3) 9 (.35) TOP / 2 42 (.65) 8 6 TOP TOP kn/m max. =5. / =75. / =.8 (=5.7 / =6.89 / =.3) 525 mm.67 in 2.5 kg 495 mm 9.49 in.3 kg 5 mm 9.68 in.5 kg =4. / =74. / =2. (=5.68 / =6.86 / =.79) 525 mm.67 in 2.5 kg 495 mm 9.49 in.3 kg 5 mm 9.68 in.5 kg P (4.53) 85 (3.35) 6 kn/m max. 835 mm in.9 kg 45 mm 6.34 in 6. kg.3 kg.4 kg 42Cr: 9-5 N/mm 2 P (5.3) 5 (4.3) kn/m max. 835 mm in. kg 45 mm 6.34 in 7. kg 3.3 kg 3.5 kg 42Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm (.3) 9.8 (.39) 6.8 (.3) 7,9 (.3) 75 2 (.47) 7 Punches P / 3 6 (6.3) 3 (5.2) P P kn/m max. =.8 (.3) 835 mm in 8. kg 45 mm 6.34 in 8.9 kg 7. kg 7.3 kg =3. (.8) 835 mm in 8. kg 45 mm 6.34 in 8.9 kg 7. kg 7.3 kg Modifications of tandard Tools: rapid and precise, directly from the manufacturer! ee pages PG (5.3) 5 (4.3) 6.8 (.3) (.39) 6 7 kn/m max. 835 mm in 6.5 kg 45 mm 6.34 in 8.5 kg 5.7 kg 5.9 kg P (5.7) 5 (4.53) 6.8 (.3).2 (.) kn/m max. 835 mm in 5. kg 45 mm 6.34 in 7.5 kg.3 kg.4 kg 42Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm 2 7 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 22 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 23

13 OLLEI TYPE OLLEI TYPE 6 Punches 45 Punches TOP / 2 8 kn/m max. TOP kn/m max TOP TOP =5. / =75. / =.8 (=5.7 / =6.89 / =.3) 525 mm.67 in 2. kg 495 mm 5 mm 9.49 in 9.68 in 42Cr: 9-5 N/mm kg.4 kg =3.8 / =73.8 / =2. (=5.66 / =6.84 / =.79) 525 mm.67 in 2. kg 495 mm 5 mm 9.49 in 9.68 in.3 kg.4 kg 75 (6.89) 5 (5.7) mm.67 in 22. kg 495 mm 9.49 in.7 kg 5 mm 9.68 in.9 kg 42Cr: 9-5 N/mm 2 2 P / (3.74) 65. (2.56) 45 P P kn/m max. =.8 (.3) 835 mm in 9.5 kg 45 mm 6.34 in 4.2 kg 9. kg 9. kg =.5 (.59) 835 mm in 9.5 kg 45 mm 6.34 in 4.2 kg 9.5 kg 9.5 kg P (3.8) 66. (2.6) 45.5 (.) 8 kn/m max. 835 mm in.2 kg 45 mm 6.34 in 5. kg 9.7 kg 9.8 kg 9 mm in.9 kg (.3) 6 5 (.) P (7.48) 6 (6.3) 8 6 kn/m max. P (5.2) (3.94) 6 6 kn/m max. 835 mm in 4.8 kg 835 mm in 9.5 kg 45 mm 6.34 in 27. kg 45 mm 6.34 in 9.6 kg 39.8 kg Take advantage of the wide 8.6 kg range of olleri Type.2 kg 8.8 kg punches by using our C45: 8-85 N/mm 2 C45: 56-7 N/mm extensive number of 2 adapters. ee pages Faster vertical vertical tool exchange with OL ee pages (.24) 6.8 (.3) 7.5 (.3) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 24 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 25

14 35 Punches P kn/m max. PU kn/m max. 6 (4.57) 95 (3.74) 86 (3.39) 65 (2.56) OLLEI TYPE 35 5 (.) (4.53) (4.72) 85 (3.35) 9 (3.54) 35.8 (.3) P / 5 7 kn/m max. P / 5 / 3 7 kn/m max. P P mm in 3.5 kg 45 mm 6.34 in 7. kg 2.8 kg 3. kg =.8 (.3) 835 mm in.5 kg 45 mm 6.34 in 5.7 kg. kg. kg =.5 (.59) 835 mm in. kg 45 mm 6.34 in 5.7 kg.4 kg.6 kg P P P mm in. kg 45 mm 6.34 in 5.5 kg.4 kg.6 kg =.8 (.3) 835 mm in 2.3 kg 45 mm 6.34 in 6. kg.7 kg.9 kg =.5 (.59) 835 mm in 2.5 kg 45 mm 6.34 in 6. kg.9 kg 2. kg =3. (.8) 835 mm in 3. kg 45 mm 6.34 in 6.4 kg 2.4 kg 2.5 kg 26 Punches P (5.79) 7 (4.6) 5 (5.9) (4.72) 26.8 (.3) 6 6 (.24) PU L OLLEI TYPE 6 (.55) 6 6 PU / 3 5 kn/m max. kn/m max. 835 mm in 9.8 kg 45 mm 6.34 in 4.9 kg 9.3 kg 9.4 kg 42Cr: 9-5 N/mm 2 kn/m max. 9 mm in 5. kg 45 mm 6.34 in 6.2 kg.3 kg 2.5 kg 26 6 (.55) 6 PU PU =7. / =7. / =.8 (=4.6 / =5.79 / =.3) 835 mm in 3.5 kg 45 mm 6.34 in 6.5 kg 85 mm 3.29 in 2.8 kg 3. kg =9. / =39. / =3. (=4.29 / =5.47 / =.8) 835 mm in 3.5 kg 45 mm 6.34 in 6.7 kg 85 mm 3.29 in 2.8 kg 3. kg 3 Punches P..3.6 (4.33) 8 (3.5) 26.8 (.3) 3 kn/m max. 835 mm in. kg 45 mm 6.34 in 5.5 kg.4 kg 8 mm 3.5 in.6 kg 97 (3.82) 67 (2.64) 3.52 (.) 6 42Cr: 9-5 N/mm kn/m max. 835 mm in.5 kg 45 mm 6.34 in 5.2 kg. kg 85 mm 3.5 in. kg P (5.28) (4.9) 3.8 (.3) kn/m max. 835 mm in 3.3 kg 45 mm 6.34 in 6.5 kg 2.6 kg 2.8 kg TOP kn/m max. TOP kn/m max. 75 (6.89) 5 (5.7) 26.8 (.3) mm.67 in. kg 495 mm 9.49 in.4 kg 5 mm 9.68 in.5 kg 42Cr: 9-5 N/mm (8.7) 75 (6.89) mm.67 in. kg 495 mm 9.49 in 3.2 kg 5 mm 9.68 in 3.3 kg 42Cr: 9-5 N/mm (.24) 26.8 (.3) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 26 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 27

15 TOP.P OLLEI TYPE TOP.P /24 emming tools Z-Profile Tools 525 mm.67 in. kg 495 mm 9.49 in.3 kg 525 mm.67 in. kg 495 mm 9.49 in.3 kg CPZ OLLEI TYPE kn/m max. 835 mm in 37.5 kg 45 mm 6.34 in 8.7 kg Cr: 9-5 N/mm Cr: 9-5 N/mm 2 58 (6.22) 28 (5.4) 58 (2.28) 28.6 (.24) 8 (.3) (6.22) 28 (5.4) 58 (2.28) 24.6 (.24) 8 (.3) (2.52) 22 (.87) 22 (.87) TOP.P (6.22) 28 (5.4) 58 (2.28) 24.6 (.24) 8 (.39) Example of application mm.67 in. kg 495 mm 9.49 in.3 kg 42Cr: 9-5 N/mm 2 Only for thin material! emming Dies ee page 75 TOP.P (6.22) 28 (5.4) 58 (2.28) 24.6 (.24) 8 2 (.47) mm.67 in.6 kg 495 mm 9.49 in. kg 42Cr: 9-5 N/mm 2 Z-Tool Inserts 6 / 5 / / 9 37 (.46) Z Z α α 23 (.9) kn/m max. Model Z mm Z in α * mm * inch Weight Weight CEZ kg 5.5 kg CEZ kg 5.5 kg CEZ kg 5.5 kg CEZ kg 5.5 kg CEZ./ kg 5.5 kg CEZ.5/ kg 5.5 kg CEZ 2./ kg 5.5 kg CEZ 2.5/ kg 5.5 kg 835 mm / in 45 mm / 6.34 in CEZ kg 5. kg CEZ kg 5. kg CEZ kg 5. kg CEZ kg 5. kg CEZ kg 5. kg CEZ kg 5. kg CEZ kg 5. kg CEZ kg 5. kg CEZ kg 5. kg CEZ kg 5. kg CEZ kg 5. kg * Fe max = 42 Kg/mm 2 8 kn/m max. kn/m max. mm in mm in.45 Kgf/mm 2 t/m.7 Kgf/mm 2 t/m mm 2X in mm in.45 Kgf/mm 2 t/m.7 Kgf/mm 2 t/m Z-Tool Inserts 9 45 (.77) 25 (.98) 23 (.9) Z α kn/m max. Model Z mm Z in α * mm inch * Weight Weight CEZ kg 6.5 kg CEZ kg 6.5 kg 835 mm / in 45 mm / 6.34 in CEZ kg 6.5 kg CEZ kg 6.5 kg CEZ kg 6.5 kg CEZ kg 6.5 kg CEZ kg 6.5 kg * Fe max = 42 Kg/mm 2 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 28 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 29

16 adius Tools TOP.PC.-8 (4.72) OLLEI TYPE 9 (3.54) 3 (.8) 8 TOP.C8 TOP.C 42Cr: 9-5 N/mm 2 kn/m max. 522 mm.55 in. kg 495 mm 9.49 in 2. kg for adius tools with 8- (TOP.C8-TOP.C) see below adius Punches by olleri also sectioned! Take advantage of this flexibility! adius Tools PU.67.- OLLEI TYPE 67 (2.64) (.55) C3 C7.5 kn/m max. 83 mm in 9.7 kg 4 mm 6. in 5. kg for adius tools with (C3-C7.5) see below TOP.PC.- (4.72) 9 (3.54) 3 (.8) 42Cr: 9-5 N/mm 2 kn/m max. 522 mm.55 in.5 kg 495 mm 9.49 in. kg for adius tools with - (TOP.C-TOP.C) see below TOP.C TOP.C Mark-free bending with PU-Upholstery ee pages TOP-adius Tools: 8- M6 C 6-62 Material: C53 induction hardened 6-62 c TOP.C.39.3 kg 2.7 kg 525 mm /.67 in C3 - C7.5 kn/m max. kn/m max. Model mm in Weight Weight Model mm in Weight Weight TOP.C kg.9 kg C kg. kg 495 mm / 6.34 in TOP.C kg 2.8 kg TOP.C kg 3.8 kg TOP.C kg 4.7 kg TOP.C kg 6.6 kg TOP.C kg 7.5 kg TOP.C kg.3 kg TOP.C kg 5. kg C53: 6-76 N/mm 2 TOP.C.57.7 kg 9.5 kg M4 C kg. kg C kg.7 kg 835 mm / in 45 mm / 6.34 in C kg.25 kg C kg.3 kg C kg.35 kg C kg. kg C kg.5 kg C kg. kg C kg.5 kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 3 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 3

17 OLLEI TYPE OLLEI TYPE adius Tools PU kn/m max. 83 mm in 9. kg 4 mm 6. in 5. kg for adius tools with 8-5 (C3.8-C7.5) and hemming tool (E 3.22) see page 33 PU kn/m max. 83 mm in 9. kg 42 mm 6.22 in 4.5 kg for adius tools with 8-5 (C3.8-C7.5) and hemming tool (E 3.22) see page 33 adius Tools adius Tool: Ø 6- mm ( in) M8 Ø Model Ø mm Ø in mm in 835 mm / in Weight 8 kn/m max. 45 mm / 6.34 in Weight C kg. kg C kg. kg C kg. kg 67 (2.64) (.55) E (3.43) (.55) C3.8 C7.5 E 3.22 C3.8 C7.5 PU.5. 5 (4.3) (.55) 8 kn/m max. 83 mm in 2. kg 4 mm 6. in 6. kg for adius tools with 8-5 (C3.8-C7.5) and hemming tool (E 3.22) see page 33 E 3.22 C3.8 C7.5 PU.5. 5 (4.53) (.55) 5 kn/m max. 8 kn/m max. 83 mm in 26. kg Model Ø mm Ø in mm in mm in Weight Weight 4 mm 6. in 3. kg C kg.2 kg for adius tools with 8-5 C kg.8 kg (.55) (C3.8-C7.5) and hemming tool M8 C kg 2.4 kg (E 3.22) see page 33 C kg 3.5 kg C kg 4.7 kg C kg 6.7 kg Ø C kg. kg C kg.5 kg C kg 7. kg E 3.22 C kg 2.7 kg C3.8 C7.5 adius Tool: Ø 25- mm ( ) 835 mm / in 45 mm / 6.34 in emming Tool s Please note that delivery time varies according to your location. E kn/m max. 22 (.87) 7 (.67) (.55) M8 3 (.8) 835 mm in 3.5 kg 45 mm 6.34 in.7 kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 32 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 33

18 OLLEI TYPE OLLEI TYPE Punch extensions / Intermediates Our dvantages Your Convenience Wedge crowning prevents deflection Increase in leg length for special increase in leg length see PE-p4 in the area of special tools on page 237 D4 9 (3.54) 3 (.8) 3 (.22) 3 7 (.28) (.5) per piece L=5 mm (5.9 in) Punch extension without wedge crowning kn/m max..8 kg Intermediates INT5-3 (.79) (.5) 53 (2.9) Wedge crown INT5 per piece 8. kg 3 7 (.28) per piece 5.9 kg L=5 mm (5.9 in) (.5) L=5 mm (5.9 in) kn/m max. kn/m max. Wedge crown 6 (.24) 3 (.5) 5 (5.9) olleri Clamping ystems 5 (5.9) (.57) Compatible tensioner see page (.57) ee pages 98-5 (.57) (.55) (.55) INT 3 7 (.28) (.5) kn/m max. per piece 3.5 kg L=5 mm (5.9 in) INT FIO kn/m max. INT--D (eavy Duty) 6 kn/m max. INT-D (eavy Duty) 6 kn/m max. 3 7 (.28) (.5) per piece L=5 mm (5.9 in) Punch extension without wedge crowning 4. kg 3 (.79) (.5) per piece L=5 mm (5.9 in) 5.2 kg 3 7 (.28) (.5) per piece L=5 mm (5.9 in) 42Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm kg Wedge crown Wedge crown Wedge crown (3.94) (.57) (.57) (3.94) (.57) (.57) (4.72) 53 (2.9) (4.72) (.57) (.55) (.55) (.57) 27 (.6) (.57) 27 (.6) INT- (3.94) 3 (.5) (.79) (.57) 53 (2.9) (.55) Wedge crown kn/m max. INT per piece 5.2 kg per piece 4.5 kg 3 7 (.28) L=5 mm (5.9 in) (.5) L=5 mm (5.9 in) Intermediates also available in L=7 mm upon request. (3.94) (.57) (.57) (.55) Wedge crown kn/m max. Punch dapters D kn/m max. D9- kn/m max. 3 7 (.28) 3.5 (.5) (.) 3 (.5) 8.4 (.33) 3 (.8) 3 (.8) 67 (2.64) per piece 4. kg 3 7 (.28) per piece 6. kg L=5 mm (5.9 in) 3.5 (.5) L=5 mm (5.9 in) (.) head-bearing olleri Type olleri Type X LVD olleri Type olleri Type 2 Punches olleri Type 2 see pages (.5) 8.4 (.33) (.39) 4 (.6) 6 (.24) 2 (.83) 3 (.8) 9 (3.54) Punches olleri Type X LVD see page 62 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 34 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 35

19 DIE OLLEI TYPE 2 Content Explanation V Dies 9 2-V Dies V Dies V Dies V Dies 3 42 Die olders for 2-V Dies 43 elf Centering 2-V Dies 9 44 elf Centering 2-V Dies elf Centering 2-V Dies 45 elf Centering 2-V Dies 3 45 Die older for elf Centering 2-V Dies 46 Clamping Piece for elf Centering 2-V Dies 46 elf Centering -V Dies 9 47 elf Centering -V Dies elf Centering -V Dies 5 elf Centering -V Dies 3 5 Die older for elf Centering -V Dies 52 T-Dies 9, =8 (3.5), = (4.72) 53 T-Dies, =8 (3.5) 54 T-Dies, = (4.72) 55 T-Dies, =8 (3.5) 56 T-Dies, = (4.72) 57 T-Dies 8, =8 (3.5) 58 T-Dies 8, = (4.72) 59 T-Dies 6, =8 (3.5) 6 T-Dies 6, = (4.72) 6 T-Dies 45, =8 (3.5) / = (4.72) 62 T-Dies 35, =8 (3.5) / = (4.72) 63 T-Dies 3, =8 (3.5) 64 T-Dies 3, = (4.72) 65 T-Dies 26, =8 (3.5) 66 T-Dies 26, = (4.72) 67 -V Dies, 68 -V Dies, V Dies, 7 7 -V Dies, 6 7 -V Dies, 45 7 Multi-V Dies ynthetic Dies 74 emming Dies 75 pring-loaded emming Dies 76 Pneumatic emming Dies 77 dapter ails for Dies 78 Die dapters 79 Die Extensions 79 Compatibility Dies olleri Type are compatible with press brake machines from: CL, ccurpress, M Machinery, mada, tlantic, dira, Baykal, BL, Boschert, Boutillon, Bystronic- Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, aco, industan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, ico, afan, alvagnini, chiavi, MD, org, omo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc. With dapter-ystems the dies olleri Type are also applicable on all other press brake machines.

20 OLLEI TYPE OLLEI TYPE Content Explanation Dies Content Explanation Dies Compatibility Our dvantages Your Convenience Dies olleri Type are: compatible with press brake machines (6 mm clamping-width) from: CL, ccurpress, M Machinery, mada, tlantic, dira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, aco, industan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, ico, afan, alvagnini, chiavi, MD, org, omo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc. also applicable on all other press brake machines with dapter-ystems and dapter ails (see pages 28-22). own production facilities (no reseller or dealer) tracking of every tool possible, with a unique serial number on every article after the quality control check precision grinding (tolerance of +/-. mm) guaranteed tool reproduction exact parallelism precise, consistent working height modifications possible (see pages ) very large stock availability Tool lengths and sectioning tandard mm () 5 5 egmented tools are delivered in complete sets. ingle pieces are also available! More lengths and sectionings are possible upon request. 835 mm (32.87 in) 45 mm (6.34 in) 9 mm (35.43 in) 85 mm () (8 segments) 2 Material The raw material is obtained from qualified suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength (3.29 in) ( segments) Material Type Mechanical resistance of the material ardness of the operating surfaces ardness of the material and the tool body and the tool body after induction hardening 42CrMo4 9-5 N/mm C 54-6 C C N/mm C 54-6 C pecifications for the maximum press force kn/m are indicated as such, t = kn. olleri TOP-ystem (3.29 in) 525 mm (.67 in) Tang ll dies olleri Type are standardized with a 6 mm (2.36 in) tang. (Differing data see each tool.) Indications of precision ground surfaces: mm (9.49 in) mm (9.49 in) (8 segments) inner radius 54-6 C Press force line Press force lines inner radius 54-6 C Modification: Wedge Bar / Tail To use the dies olleri Type on other press brake machines a mm (.39 in) groove is milled and a grounded wedge bar /tail is needed in the correct size. Mounting example inner radius 54-6 C Press force line Press force line inner radius 54-6 C Wedge Bar / Tail (W x ) ystem 3 x 3 mm (.5 x.8 in) olleri Type 2 and 3 (Bystronic-Beyeler/afan/Trumpf etc.) 55 x 55 mm (2.7 x 2.7 in) olleri Type X ET 2.7 x 29 mm (.5 x. in) olleri Type X LVD 35 x 55 mm (.38 x 2.7 in) olleri Type X Weinbrenner Die olleri Type Groove Wedge Bar / Tail pecific information and prizes are found in the olleri ervice / Modifications Chapter (see page 252) W Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 38 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 39

21 OLLEI TYPE OLLEI TYPE 2-V Dies 9 2-V Dies M (.6) 4 44 (.73) 7 (.28).3 (.2) 4 (.6) (.28) 7.5 (.) 26 (.2) 9 M26.9. kn/m max. kn/m max. 835 mm in 9. kg 835 mm in 9. kg 45 mm 6.34 in 4.5 kg (.24) 6 39 (.54) (.39) 45 mm 6.34 in 4.5 kg.4 (.6) 6 (.24) (.39).6 (.24) 9 mm in. kg 26 (.2) 9 M (.8) (.43) 3 (.22) 3 (.5) kn/m max. 835 mm in 8. kg 45 mm 6.34 in 4. kg C45: 56-7 N/mm2 26 (.2) (.55) 8 (.7) 3 (.8) Take advantage of our adapters on pages when using dies olleri Type (2.7) 55 (2.7) 55 (2.7) M (.3) 8 37 (.46) (.39).5 (.) 8 (.3) (.47) 2.8 (.3) 26 (.2) 9 kn/m max. 835 mm in 9. kg 45 mm 6.34 in 4.5 kg 9 mm in. kg Die olders for 2-V Dies see page kn/m max kn/m max..4 (.6) (.8) (.26) 25.5 (.) 6 (.24) (.39).6 (.24) 835 mm in 8. kg 45 mm 6.34 in 3.9 kg.5 (.) (.22) (.) 8 (.3) 2 (.47) 7.5 (.3).8 (.3) 835 mm in 8. kg 45 mm 6.34 in 3.9 kg 55 (2.7) 5 (.97) 5 (.97) 23 7 kn/m max. 2 8 kn/m max..4 (.6) (.8) (.2) 6 (.24) (.39) (.26).6 (.24) 835 mm in 8. kg 45 mm 6.34 in 3.9 kg (.2) (.) 26 (.2) 8 (.3) (.47) (.3).8 (.3) 835 mm in 8. kg 45 mm 6.34 in 3.9 kg 25.5 (.) (.33) (.2) (.55) 8 (.7).5 (.4).5 (.) kn/m max. 835 mm in 7.7 kg 45 mm 6.34 in 3.8 kg 26.5 (.) (.3) (.2) 2 (.47) (.79) 2 (.47).5 (.) kn/m max. 835 mm in 7.5 kg 45 mm 6.34 in 3.7 kg 5 (.97) 5 (.97) 5 (.97) 5 (.97) 2-V Dies M (.24) 6 39 (.54) (.39) kn/m max. 835 mm in 9. kg 45 mm 6.34 in 4.5 kg M (.3) 8 37 (.46) (.39) kn/m max. 835 mm in 9. kg 45 mm 6.34 in 4.5 kg 27 (.37) (.57) 7 kn/m max. 835 mm in 7. kg 45 mm 6.34 in 3.4 kg.4 (.6) 6 (.24) (.39).6 (.24).5 (.) 8 (.3) (.47) 2.8 (.3).8 (.3) 6 (.63) 25 (.98).8 (.3) 26 (.2) 26 (.2) 26 (.2) 55 (2.7) 55 (2.7) 5 (.97) M (.8) (.39) 3 (.8) 5 (.59) 2 (.47) (.79) 3 (.8) kn/m max. 835 mm in 9. kg 45 mm 6.34 in 4.5 kg M (.8) (.47) 2 6 (.63) 26.5 (.4) 25 (.98) 6.5 (.65) 2.75 (.8) kn/m max. 835 mm in 8. kg 45 mm 6.34 in 4. kg 3 (.39) 5 (.59) 3 (.8) 2 (.47) (.79) 4 (.57) kn/m max. 835 mm in 7.5 kg 45 mm 6.34 in 3.7 kg 26 (.2) 55 (2.7) 26 (.2) 55 (2.7) 26 (.2) 55 (2.7) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 4

22 2-V Dies 6 OLLEI TYPE OLLEI TYPE Die olders for 2-V Dies M (.) (.24) 6 39 (.54) (.39) 26 (.2) 6 (.24) (.39).8 (.3) 6 55 (2.7) 6 kn/m max. 835 mm in 9. kg 45 mm 6.34 in 4.5 kg 9 mm in. kg M (.) (.3) 8 37 (.46) (.39) 26 (.2) 8 (.3) (.47) 2 8 kn/m max. 835 mm in 9. kg 45 mm 6.34 in 4.5 kg C45: 56-7 N/mm (2.7).8 (.3) U34 34 (.34) (.55) (.79) 83 mm in 9. kg 4 mm 6. in 4.5 kg U55 55 (2.7) 9 (.75) 36 (.42) 2 M (.39) 3 (.8) 5 (.59) 8 kn/m max. 835 mm in 8. kg 45 mm 6.34 in 4. kg M kn/m max. 835 mm in 8. kg 45 mm 6.34 in 4. kg U75.8 (.3) 26 (.2) 2 (.47) 6 55 (2.7) (.79) 3 (.8) 75 (2.95) 56 (2.) 9 (.75) for all 2-V Dies pages mm in.5 kg 4 mm 6. in 7.2 kg for all 2-V Dies pages -42 (.47) 2 28 (.) 5 (.59) 83 mm in.5 kg 4 mm 6. in. kg 3 (.8) 26 (.2) 6 (.63) 6 55 (2.7) (.79) 3 (.8) for all 2-V Dies pages V Dies 35 M3.35. (.24) 6 39 (.54) (.39).6 (.24) 6 (.24) (.39) (.39) 3 kn/m max. 835 mm in. kg 45 mm 6.34 in 5.5 kg M (.3) 8 37 (.46) (.39) (.39) 8 (.3) (.47) 2.2 (.47) 3 kn/m max. 835 mm in. kg 45 mm 6.34 in 5. kg 3 (.22) (2.7) 26 (.2) (2.7) s Please note that delivery time varies according to your location. 2-V Dies kn/m max. 835 mm in 3.3 kg.5 8 (.7) 45 mm 6.34 in 5.6 kg (.39) 8 (.3) 2 (.47) (.39) 42Cr: 9-5 N/mm 2 38 (.5) olleri Videos find updated and helpful videos at: videos/overview Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 42 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 43

23 OLLEI TYPE elf Centering 2-V Dies 9 OLLEI TYPE elf Centering 2-V Dies (.2) (.) (.2) 5 (.) 46 (.8) 6 (.24) 4 (.6) 9 5 (.59) 34.5 (.36) 7 (.28).5 (.) C45: 8-85 N/mm 2 8 kn/m max. 835 mm in 9.7 kg 45 mm 6.34 in 4.8 kg 9.2 kg 9.4 kg (.6) (.8) (.2) 6.5 (.26) 46 (.8) 6 (.24) 6 (.24) 9 5 (.59) 37 (.46) (.39).6 (.24) C45: 8-85 N/mm 2 8 kn/m max. 835 mm in.3 kg 45 mm 6.34 in 5. kg 9.8 kg 9.9 kg (.3) (.3) (.2) 2 (.47) 46 (.8) 6 (.24) 2 (.47) (.79) 5 (.59) 45.5 (.79).75 (.69) 8 kn/m max. 835 mm in 2. kg 45 mm 6.34 in 6. kg.4 kg.6 kg (.49) (.33) (.2).5 (.4) 46 (.8) 6 (.24) (.55) C45: 8-85 N/mm 2 C45: 8-85 N/mm 2 5 (.59) 45 (.77) 8 (.7).5 (.59) 8 kn/m max. 835 mm in 2.6 kg 45 mm 6.34 in 6. kg 2. kg 2. kg (.) (.22) (.2) 7.5 (.3) 46 (.8) 6 (.24) 8 (.3) 9 5 (.59) 39 (.54) 2 (.47).8 (.3) C45: 8-85 N/mm kn/m max. 6 kn/m max. 835 mm in. kg 45 mm 6.34 in 5. kg 9.5 kg 9.6 kg.4 (.6) (.7) 4.25 (.57) 5 (.) 4 (.6) 9 5 (.59) 34.5 (.36) 5.75 (.23) 7 (.28).4 (.6) 835 mm in 9.7 kg 45 mm 6.34 in 4.8 kg 9.2 kg 9.4 kg kn/m max. 835 mm in 3. kg (.37) (.2).5 (.57) 45 mm 6.34 in 6.5 kg.5 (.59) 6 25 (.98).75 (.69) 2.4 kg (.63) 2.5 kg 46 (.8) 6 (.24) 3246 C45: 8-85 N/mm 2 C45: 8-85 N/mm 2 C45: 8-85 N/mm 2 5 (.59) 5 (.97).4 (.6) 45.5 (.79) (.8) (.24) 6 (.24) 5 (.59) 5 (.97) (.39) 6.5 (.26).6 (.24) 7 kn/m max. 835 mm in 7. kg 45 mm 6.34 in 8.4 kg 6.2 kg 6.4 kg (.6) (.22) (.8) 6 (.24) 6 (.24) 9 5 (.59) 37 (.46) 7.5 (.3).6 (.24) (.39) 7 kn/m max. 835 mm in.5 kg 45 mm 6.34 in 5.2 kg. kg. kg elf Centering 2-V Dies M (.22) (.46) 7.5 (.3).5 (.) 8 (.3) 2.8 (.3) (.47) C45: 8-85 N/mm 2 5 (.59) 42Cr: 9-5 N/mm 2 5 (.97) 26 (.2) 6 (.24) kn/m max. 835 mm in 9. kg 45 mm 6.34 in 4.5 kg 8.6 kg 8.7 kg Die dapters see pages elf Centering 2-V Dies elf Centering 2-V Dies (.6) (.8) (.2) 6.5 (.26) 46 (.8) 6 (.24) 6 (.24) 5 (.59) 37 (.46) (.39).6 (.24) 8 kn/m max. 835 mm in.3 kg 45 mm 6.34 in 5.2 kg 9.8 kg 9.9 kg (.) (.22) (.2) 7.5 (.3) 46 (.8) 6 (.24) 8 (.3) 8 kn/m max. 835 mm in.9 kg 45 mm 6.34 in 5.4 kg.4 kg.5 kg C45: 8-85 N/mm 2 C45: 8-85 N/mm 2 C45: 8-85 N/mm 2 5 (.59) 39 (.54) 2 (.47).8 (.3) 46.7 (.28) 7.6 (.24) 46 (.8) 6 (.24) 26 (.2) 6 (.24) 3 5 (.59) 45 (.77) (.39) 2 (.47) (.39) 46.8 kn/m max. kn/m max. 835 mm in 2.2 kg 45 mm 6.34 in 6. kg.6 kg.8 kg.8 (.3) (.37) (.2).5 (.57) 46 (.8) 6 (.24) 8 (.3) 3 5 (.59) 5 (.97) 2 (.47).5 (.59) 835 mm in 3.2 kg 45 mm 6.34 in 6.6 kg 2.6 kg 2.7 kg C45: 8-85 N/mm 2 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 44 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 45

24 OLLEI TYPE Die olders for elf Centering 2-V Dies OLLEI TYPE elf Centering -V Dies 9 PM6 25 (.98) (.37) (.) (.59) (.79) kn/m max. 835 mm in 7.5 kg 45 mm 6.34 in 3.7 kg for all self centering 2-V dies pages (.8) (.24) 6 9 (.55).5 (.59) 95 kn/m max. 835 mm in 3. kg 45 mm 6.34 in.5 kg 32 (.3) 8 3 (.8) 9 (.55).5 (.59) 95 kn/m max. 835 mm in 3. kg 45 mm 6.34 in.5 kg kn/m max kn/m max. PM5 5 (.59) M8 kn/m max. 835 mm in 4. kg 45 mm 6.34 in 2. kg for all self centering 2-V dies pages PM5. 5 (.59) M8 kn/m max. 835 mm in 5.4 kg 45 mm 6.34 in 2.6 kg for all self centering 2-V dies pages (.39) 3 (.8) 9 5 (.59) 2 (.79) 835 mm in 3. kg 45 mm 6.34 in.5 kg (.24) 6 9 (.55).5 (.59) 835 mm in 5.5 kg 45 mm 6.34 in 2.7 kg 5 (.59) (.39) 5 (.97) (.79) 5 (.59) 5 (.97) C45: 8-85 N/mm 2 7 (.3) (.59) 95 kn/m max. 835 mm in 5.5 kg 45 mm 6.34 in 2.7 kg 73 (.39) 2 (.79) 9 95 kn/m max. 835 mm in 6. kg 45 mm 6.34 in 3. kg 5 (.59) (.55) (.55) 5 (.59) Clamping Piece for elf Centering 2-V Dies elf Centering -V Dies PB6 25 (.98) 5 (.59) 5 (.97) pair Fe37.2 kg 36 (.24) (.6) (.55).5 (.59) 95 kn/m max. 835 mm in 3. kg 45 mm 6.34 in.5 kg 326 (.3) (.6) (.55).5 (.59) 95 kn/m max. 835 mm in 3. kg 45 mm 6.34 in.5 kg s Please note that delivery time varies according to your location. 32 (.39) 3 (.8) 5 (.59) 2 (.79) 95 kn/m max. 835 mm in 3. kg 45 mm 6.34 in.5 kg 32 (.47) 2 3 (.8) 7 (.67) 2.5 (.98) kn/m max. 835 mm in 3. kg 45 mm 6.34 in.5 kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 46 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 47

25 OLLEI TYPE OLLEI TYPE elf Centering -V Dies elf Centering -V Dies 325 (.55) 3 (.8) 8 (.7) 2.5 (.98) kn/m max. 835 mm in 3.3 kg 45 mm 6.34 in.6 kg 76 (.24) 6.5 (.59) 95 kn/m max. 835 mm in 5.5 kg 45 mm 6.34 in 2.7 kg M (.6) 4.6 (.24) kn/m max. 835 mm in 5.4 kg 45 mm 6.34 in 2.7 kg 5. kg 5.2 kg M (.24) 6.8 (.3) kn/m max. 835 mm in 5.4 kg 45 mm 6.34 in 2.7 kg 5. kg 5.2 kg 2 (.55) (.55) (.55) 76 (.3) 8.5 (.59) 95 kn/m max. 835 mm in 5.5 kg 45 mm 6.34 in 2.7 kg Compatible Die olders for bolted -V Dies see page 52, -No. 33 M (.3) 8. (.39) kn/m max. 835 mm in 5.4 kg 45 mm 6.34 in 2.7 kg 5. kg 5.2 kg M6..88 (.39).2 (.47) kn/m max. 835 mm in 5.6 kg 45 mm 6.34 in 2.8 kg 5.3 kg 5.4 kg (.55) (.55) 5 (.59) (.55) 8 (.7) 7 95 kn/m max. 7 (.39) 2 (.79) 5 (.59) (.55) 5 (.59) 835 mm in 6. kg 45 mm 6.34 in 3. kg (.47) (.98) 5 (.59) (.55) 7 (.67) 95 kn/m max. 835 mm in 6. kg 45 mm 6.34 in 3. kg M (.47) 2.5 (.59) 5 (.59) (.55) 8 (.7) kn/m max. 835 mm in 6. kg 45 mm 6.34 in 3. kg 5.8 kg 5.9 kg M (.59) (.63) 6 2. (.79) (.55) 24 (.94) kn/m max. 835 mm in 7. kg 45 mm 6.34 in 3.5 kg 6.8 kg 6.9 kg M (.59) (.79) 2. (.79) (.55) 3 (.8) kn/m max. 835 mm in 8. kg 45 mm 6.34 in 4. kg 7.6 kg 7.7 kg Compatible Die olders for bolted -V Dies see page 52, No. U6F M (.59) 25 (.98) (.55) 35 (.38) 3. (.8) kn/m max. 835 mm in 9.2 kg 45 mm 6.34 in 4.6 kg 8.8 kg 8.9 kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 48 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 49

26 OLLEI TYPE elf Centering -V Dies OLLEI TYPE elf Centering -V Dies 3 M (.6) 4.6 (.24) kn/m max. 835 mm in 5.4 kg 45 mm 6.34 in 2.7 kg 5. kg 5.2 kg M (.24) 6.8 (.3) kn/m max. 835 mm in 5.4 kg 45 mm 6.34 in 2.7 kg 5. kg 5.2 kg M6.6.3 (.24) (.24) 35 kn/m max. 835 mm in 5.9 kg 45 mm 6.34 in 2.9 kg 5.6 kg 5.7 kg 2 (.55) (.55) (.55) M (.3) 8 (.55). (.39) kn/m max. 835 mm in 5.4 kg 45 mm 6.34 in 2.7 kg 5. kg 5.2 kg M (.59) (.39).2 (.47) (.55) 8 (.7) kn/m max. 835 mm in 5.6 kg 45 mm 6.34 in 2.8 kg 5.3 kg 5.4 kg M (.59) (.3) 8.8 (.3) 2 (.8) 3 (.55) 8 (.7) 35 kn/m max. 835 mm in 6.6 kg 45 mm 6.34 in 3.3 kg 6.3 kg 6.4 kg M (.59) (.39). (.39) 2 (.8) 3 (.55) 24 (.94) 5 kn/m max. 835 mm in 7.8 kg 45 mm 6.34 in 3.9 kg 7.4 kg 7.5 kg M (.47) 2.5 (.59) kn/m max. 835 mm in 6. kg 45 mm 6.34 in 3. kg 5.8 kg 5.9 kg M (.63) 6 2 (.79) kn/m max. 835 mm in 7. kg 45 mm 6.34 in 3.5 kg 6.8 kg 6.9 kg M6.2.3 (.47) 2 2 (.8) 3.5 (.59) M6.6.3 kn/m max. 45 kn/m max. 835 mm in 7.9 kg 45 mm 6.34 in 3.9 kg 7.5 kg 7.6 kg (.63) 6 5 (.) 3 2 (.79) 835 mm in 8.8 kg 45 mm 6.34 in 4.7 kg 8.4 kg 8.5 kg 5 (.59) (.55) 8 (.7) 5 (.59) (.55) 24 (.94) 5 (.59) (.55) 24 (.94) 5 (.59) (.55) 3 (.8) M (.59) (.79) 2 (.79) kn/m max. 835 mm in 8. kg 45 mm 6.34 in 4. kg 7.6 kg 7.7 kg M (.59) 25 (.98) 3 (.8) M6..3 M kn/m max. 5 kn/m max. 5 kn/m max. 835 mm in 9.2 kg 45 mm 6.34 in 4.6 kg 8.8 kg 8.9 kg (.79) (.98) 835 mm in 5.9 kg 45 mm 6.34 in 7.9 kg 5. kg 5.3 kg (.55) (.55) (.55) (.55) 3 (.8) 35 (.38) 45 (.77) 35 (.38) 5 (.59) 5 (.) 65 (2.56) 5 (.59) 25 (.98) 8 (.3) 3 3 (.8) 835 mm in 3. kg 45 mm 6.34 in 6.3 kg 2.4 kg 2.5 kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 5 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 5

27 OLLEI TYPE OLLEI TYPE Die olders for elf Centering -V Dies Prevention of Bending Marks (3.2) (.79) (.55) kn/m max. 835 mm in 2.7 kg 45 mm 6.34 in 6.3 kg for self centering, bolted -V Dies, pages U6F 6.5 (2.42) 5.5 (2.3) (.79) (.39) (.55) 7 (.67) for self centering -V Dies, pages 49-5 kn/m max. 835 mm in.8 kg 45 mm 6.34 in 7.3 kg The following options are available to prevent bending marks on the surfaces: Protective heets PU-Upholstery ynthetic Dies The alternative to these options mentioned above, is a modification of the dies: enlargement of the dies inner radius (etrofitting of new or existing dies) This solution is available for some of our T-Dies under the No.: T Our dvantages Your Convenience Prevention of streaks and markings on the bended sheet metals No post processing necessary and therefore, time- and cost efficient. No contact of bending pieces increases product quality easy handling (.98) (.55) 95 kn/m max. 95 kn/m max. 5 mm 4.34 in 7.8 kg 26 mm 49.6 in 2.4 kg 25 (.98) for self centering -V Dies, for self centering -V Dies, pages 47-5 pages 47-5 (.55).8 (.3) 4 (.6) pecific information for mark-free bending see pages (.79) 4.5 (.63) (.79) 4.5 (.63) tandard T-Die with small inner radius causes visible bending marks T-Die T with a larger inner radius clearly reduces bending marks T-Dies 9, =8 (3.5), = (4.72) T-Dies 9, =8 mm (3.5 in) 8 (3.5) V 9 kn/m max. Model V V Weight Weight Weight Weight Weight T kg 6.5 kg 2.4 kg 2.5 kg. kg 835 mm / in 45 mm / 6.34 in / 3.3 in 85 mm / 8 (.7) V 9 kn/m max. (4.72) 8 (.7) 9 mm / in T kg 6.5 kg 2.4 kg 2.5 kg. kg T kg 7. kg 3.5 kg 3.7 kg T kg 7.5kg.3 kg.5 kg T-Dies 9, = mm (4.72 in) Model V V Weight Weight Weight Weight T kg 8. kg 5.2 kg 5.4 kg 835 mm / in 45 mm / 6.34 in / 3.3 in 85 mm / T kg 8. kg 5.2 kg 5.4 kg T kg 9. kg 8. kg 8.3 kg T kg 9. kg 8. kg 8.3 kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 52 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 53

28 OLLEI TYPE T-Dies, =8 (3.5) OLLEI TYPE T-Dies, = (4.72) T / T (3.5) 8 (.7) (.24) 6 (.55) T T kn/m max. =.4 (.6) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg =2.75 (.8) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg T / T (3.5) 8 (.7) (.3) 8 (.55) T T kn/m max. =.5 (.) 835 mm in 2.6 kg 45 mm 6.34 in 6.3 kg 2. kg 2. kg =2.75 (.8) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg T.6.88 / T.6.88 (4.72) 8 (.7) (.24) 6 (.55) T.6.88 T.6.88 kn/m max. T.8.88 / T.8.88 kn/m max. =.4 (.6) 835 mm in 6.5 kg 45 mm 6.34 in 8. kg 5.7 kg 6. kg =2.75 (.8) 835 mm in 6. kg 45 mm 6.34 in 8. kg 5.2 kg 5.4 kg (4.72) 8 (.7) (.3) 8 (.55) T.8.88 T.8.88 =.5 (.) 835 mm in 6. kg 45 mm 6.34 in 8. kg 5.2 kg 5.4 kg =2.75 (.8) 835 mm in 6. kg 45 mm 6.34 in 8. kg 5.2 kg 5.4 kg 2 T8..88 / T (3.5) 8 (.7) (.39) 8 (.7) T8..88 T8..88 kn/m max. =.8 (.3) 835 mm in.2 kg 45 mm 6.34 in 7. kg 3.5 kg 3.7 kg =2.75 (.8) 835 mm in 5. kg 45 mm 6.34 in 7.5 kg.3 kg.5 kg T (3.5) 8 (.7) (.47) 2 8 (.7) 2.75 (.8) kn/m max. 835 mm in. kg 45 mm 6.34 in 7. kg 3.3 kg 3.5 kg T..88 / T..88 (4.72) 8 (.7) (.39) 8 (.7) T..88 T..88 kn/m max. T.2.88 kn/m max. =.8 (.3) (.47) (.8) 835 mm in 9. kg 835 mm in 9. kg 45 mm 6.34 in 9. kg 45 mm 6.34 in 9.5 kg 8. kg 8.3 kg =2.75 (.8) 835 mm in 8. kg 45 mm 6.34 in 9. kg 7. kg 7.4 kg (4.72) 8 (.7) 8 (.7) 85 mm 3.29 in 8. kg 8.3 kg T (.63) (.8) kn/m max. 835 mm in 6.6 kg 45 mm 6.34 in 8.3 kg 5.8 kg 6. kg T8..88 (.78) 3. (.8) kn/m max. 835 mm in 8.5 kg 45 mm 6.34 in 9.2 kg 7.6 kg 7.8 kg T.6.88 (.63) (.8) kn/m max. T..88 kn/m max. 835 mm in 22. kg (.79) 3. (.8) 835 mm in 27. kg 45 mm 6.34 in. kg 45 mm 6.34 in 3.5 kg 85 mm 3.29 in.9 kg 2.2 kg 85 mm 3.29 in 25.7 kg 26. kg 8 (3.5) 8 (.7) 24 (.94) 8 (3.5) 8 (.7) 3 (.8) (4.72) 24 (.94) (4.72) 3 (.8) 8 (.7) 8 (.7) T (3.5) 8 (.7) 25 (.98) 35 (.38) 3. (.8) kn/m max. 835 mm in.2 kg 45 mm 6.34 in. kg 9.2 kg 9.5 kg s Please note that delivery time varies according to your location. T (4.72) 25 (.98) 35 (.38) 3. (.8) kn/m max. 835 mm in 3. kg 45 mm 6.34 in 5. kg 28.6 kg 28.9 kg Visit our omepage at: 8 (.7) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 54 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 55

29 OLLEI TYPE OLLEI TYPE T-Dies, =8 (3.5) T-Dies, = (4.72) T (3.5) 8 (.7) (.24) 6 (.55) 2.75 (.8) kn/m max. 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg T (3.5) 8 (.7) (.3) 8 (.55) 2.75 (.8) kn/m max. 835 mm in 2.6 kg 45 mm 6.34 in 6.2 kg 2. kg 2. kg T.6.85 (4.72) (.24) 6 (.55) 2.75 (.8) kn/m max. T.8.85 kn/m max. 835 mm in 6.3 kg (.3) (.8) 835 mm in 6.3 kg 45 mm 6.34 in 8. kg 45 mm 6.34 in 8. kg 85 mm 3.29 in 5.5 kg 5.7 kg (4.72) (.55) 85 mm 3.29 in 5.5 kg 5.7 kg 2 8 (.7) 8 (.7) T8..85 (.39) 2.75 (.8) kn/m max. 835 mm in.2 kg 45 mm 6.34 in 7. kg 3.5 kg 3.7 kg T (.47) (.8) kn/m max. 835 mm in. kg 45 mm 6.34 in 7. kg 3.4 kg 3.6 kg T..85 (.39) 2.75 (.8) kn/m max. T.2.85 kn/m max. 835 mm in 9. kg (.47) (.8) 835 mm in 8.9 kg 45 mm 6.34 in 8. kg 45 mm 6.34 in 9.4 kg 85 mm 3.29 in 8. kg 8.3 kg 85 mm 3.29 in 8. kg 8.2 kg 8 (3.5) 8 (.7) 8 (.7) 8 (3.5) 8 (.7) 8 (.7) (4.72) 8 (.7) (4.72) 8 (.7) 8 (.7) 8 (.7) T (.63) (.8) kn/m max. 835 mm in 6.4 kg 45 mm 6.34 in 8.2 kg 5.6 kg 5.8 kg T8..85 (.78) 3. (.8) kn/m max. 835 mm in 9. kg 45 mm 6.34 in 9.5 kg 8. kg 8.3 kg T.6.85 (.63) (.8) kn/m max. T..85 kn/m max. 835 mm in 22.7 kg (.78) 3. (.8) 835 mm in 3. kg 45 mm 6.34 in.3 kg 45 mm 6.34 in 5. kg 85 mm 3.29 in 2.7 kg 2.9 kg 85 mm 3.29 in 28.6 kg 28.9 kg 8 (3.5) 8 (.7) 24 (.94) 8 (3.5) 8 (.7) 3 (.8) (4.72) 8 (.94) (4.72) 3 (.8) 8 (.7) 8 (.7) T (3.5) 8 (.7) 25 (.98) 35 (.38) 3. (.8) kn/m max. 835 mm in. kg 45 mm 6.34 in. kg 9. kg 9.3 kg Do you have queries about delivery times, operational areas, and other possibilities? Give us a call! T (4.72) 25 (.98) 35 (.38) 3. (.8) kn/m max. 835 mm in 3. kg 45 mm 6.34 in 5. kg 28.6 kg 28.9 kg 8 (.7) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 56 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 57

30 OLLEI TYPE T-Dies 8, =8 (3.5) OLLEI TYPE T-Dies 8, = (4.72) T (3.5) 8 (.7) (.24) 6 8 (.55) 2.75 (.8) 95 kn/m max. 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg T (3.5) 8 (.7) (.3) 8 8 (.55) 2.75 (.8) 95 kn/m max. 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg T.6.8 (4.72) (.24) 6 8 (.55) 2.75 (.8) 95 kn/m max. T kn/m max. 835 mm in 8. kg (.3) (.8) 835 mm in 8. kg 45 mm 6.34 in 9. kg 45 mm 6.34 in 9. kg 85 mm 3.29 in 7. kg 7.4 kg (4.72) 8 (.55) 85 mm 3.29 in 7. kg 7.4 kg 2 8 (.7) 8 (.7) T (3.5) 95 kn/m max. T kn/m max. T..8 (4.72) (.39) 8 8 (.7) 2.75 (.8) 95 kn/m max. T kn/m max. 835 mm in 8. kg (.47) (.8) 835 mm in 8. kg 45 mm 6.34 in 9. kg 45 mm 6.34 in 9. kg (4.72) 8 8 (.7) 8 (.7) 8 (.7) T kn/m max. T kn/m max. T.6.8 (4.72) (.63) (.94) 2.75 (.8) 95 kn/m max. T kn/m max. 835 mm in 8.8 kg (.79) 3. (.8) 835 mm in 26.3 kg 45 mm 6.34 in 9.3 kg 45 mm 6.34 in 3. kg (4.72) 3 (.8) 8 (.7) 8 8 (.7) T kn/m max. T.25.8 (4.72) 25 (.98) 8 35 (.38) 3. (.8) 95 kn/m max. 8 (.7) 8 (.7) (.39) 8 8 (.7) 2.75 (.8) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg 8 (3.5) 8 (.7) (.47) (.7) 2.75 (.8) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg 85 mm 3.29 in 7. kg 7.4 kg 85 mm 3.29 in 7. kg 7.4 kg 8 (3.5) 8 (.7) (.63) (.94) 2.75 (.8) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg 8 (3.5) 8 (.7) 25 (.98) 8 3 (.8) 3. (.8) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg 85 mm 3.29 in 7.9 kg 8. kg 85 mm 3.29 in 25. kg 25.4 kg 8 (.7) 8 (3.5) 8 (.7) 25 (.98) 8 35 (.38) 3. (.8) 835 mm in. kg 45 mm 6.34 in. kg 9. kg 9.3 kg More than. tools are available for you in our warehouse! 835 mm in 3. kg 45 mm 6.34 in 8. kg 28.6 kg 28.9 kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 58 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 59

31 OLLEI TYPE T-Dies 6, =8 (3.5) OLLEI TYPE T-Dies 6, = (4.72) T8.6.6 / T (3.5) 8 (.7) (.24) 6 6 (.55) T8.6.6 T kn/m max. =.5 (.) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg =.5 (.59) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg T8.8.6 / T (3.5) 8 (.7) (.3) 8 6 (.55) T8.8.6 T kn/m max. =.8 (.3) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg =.5 (.59) 835 mm in 3. kg 45 mm 6.34 in 6.5 kg 2.4 kg 2.5 kg T.6.6 / T.6.6 (4.72) 8 (.7) (.24) 6 6 (.55) T.6.6 T kn/m max. =.5 (.) 835 mm in 6. kg 45 mm 6.34 in 8. kg 5.2 kg 5.4 kg =.5 (.59) 835 mm in 6. kg 45 mm 6.34 in 8. kg 5.2 kg 5.4 kg T.8.6 / T.8.6 (4.72) 8 (.7) (.3) 8 6 (.55) T.8.6 T kn/m max. =.8 (.3) 835 mm in 6. kg 45 mm 6.34 in 8. kg 5.2 kg 5.4 kg =.5 (.59) 835 mm in 6. kg 45 mm 6.34 in 8. kg 5.2 kg 5.4 kg 2 T8..6 / T (3.5) 8 (.7) (.39) 6 8 (.7) T8..6 T kn/m max. =.8 (.3) 835 mm in 7. kg 45 mm 6.34 in 7. kg 6.2 kg 6.4 kg =2.75 (.8) 835 mm in 5. kg 45 mm 6.34 in 7.5 kg.3 kg.5 kg T8.2.6 / T (3.5) 8 (.7) (.47) (.7) T8.2.6 T kn/m max. =.8 (.3) 835 mm in 7. kg 45 mm 6.34 in 7. kg 6.2 kg 6.4 kg =2.75 (.8) 835 mm in 5. kg 45 mm 6.34 in 7.5 kg.3 kg.5 kg T..6 / T..6 (4.72) 8 (.7) (.39) 6 8 (.7) T..6 T..6 6 kn/m max. =.8 (.3) 835 mm in 8. kg 45 mm 6.34 in 9. kg 7. kg 7.4 kg =2.75 (.8) 835 mm in 8. kg 45 mm 6.34 in 9. kg 7. kg 7.4 kg T.2.6 / T.2.6 (4.72) 8 (.7) (.47) (.7) T.2.6 T kn/m max. =.8 (.3) 835 mm in 8. kg 45 mm 6.34 in 9. kg 7. kg 7.4 kg =2.75 (.8) 835 mm in 8. kg 45 mm 6.34 in 9. kg 7. kg 7.4 kg T (3.5) 8 (.7) (.63) (.94) 2.75 (.8) 6 kn/m max. 835 mm in 5.6 kg 45 mm 6.34 in 8.7 kg.8 kg 5. kg T (3.5) 8 (.7) (.79) 6 3 (.8) 3. (.8) 6 kn/m max. 835 mm in 8. kg 45 mm 6.34 in 9.5 kg 7. kg 7.4 kg T.6.6 (4.72) 8 (.7) (.63) (.94) 2.75 (.8) 6 kn/m max. 835 mm in 22.4 kg 45 mm 6.34 in. kg 2.3 kg 2.6 kg T..6 (4.72) 8 (.7) (.79) 6 3 (.8) 3. (.8) 6 kn/m max. 835 mm in 26. kg 45 mm 6.34 in 3. kg 24.8 kg 25. kg T (3.5) 25 (.98) 6 35 (.38) 3. (.8) 6 kn/m max. 835 mm in 9.5 kg 45 mm 6.34 in. kg 8.6 kg 8.8 kg T.25.6 (4.72) 25 (.98) 6 3. (.8) 6 kn/m max. 835 mm in 28.5 kg 45 mm 6.34 in 5. kg 27. kg 27.5 kg For modifications on dies see pages (.7) 8 (.7) 35 (.38) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 6 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 6

32 OLLEI TYPE OLLEI TYPE T-Dies 45, =8 (3.5), = (4.72) T-Dies 35, =8 (3.5), = (4.72) T-Dies 45, =8 mm (3.5 in) 8 (3.5) 8 (.7) V 45 5 kn/m max. Model V V Weight Weight Weight Weight T kg 6.5 kg 2.4 kg 2.5 kg T kg 7.5 kg.3 kg.5 kg 835 mm / in T kg 7. kg 3.3 kg 3.5 kg T kg 8. kg 5.5 kg 5.7 kg T kg 8.3 kg 5.8 kg 6. kg T kg 9. kg 7. kg 7.3 kg T kg. kg 9. kg 9.3 kg 45 mm / 6.34 in / 3.3 in 85 mm / 2 T-Dies 45, = mm (4.72 in) (4.72) V 45 5 kn/m max. Model V V Weight Weight Weight Weight T kg 8. kg 5.2 kg 5.4 kg T kg 9. kg 7. kg 7.3 kg 835 mm / in T kg 9. kg 7. kg 7.3 kg T kg 9. kg 7. kg 7.3 kg T kg 2.5 kg 23.8 kg 24. kg T kg 3.5 kg 24.8 kg 25. kg T kg 5. kg 28.6 kg 28.9 kg 45 mm / 6.34 in / 3.3 in 85 mm / T-Dies 35, =8 mm (3.5 in) 8 (3.5) 8 (.7) V 35 Model V V kn/m max. Weight Weight Weight Weight T kg 6.5 kg.9 kg 2. kg T kg 7. kg 2.4 kg 2.6 kg T kg 7.5 kg.3 kg.5 kg T kg 8. kg.8 kg 5. kg T kg 8.5 kg 7. kg 7.3 kg T kg 9. kg 8.4 kg 8.6 kg T kg 9.9 kg 9. kg 9.3 kg 835 mm / in 45 mm / 6.34 in / 3.3 in 85 mm / 8 (.7) T-Dies 35, = mm (4.72 in) (4.72) V 35 Model V V kn/m max. Weight Weight Weight Weight T kg 8. kg 5.2 kg 5.4 kg T kg 9. kg 7. kg 7.3 kg T kg 8.5 kg 8.9 kg 9. kg T kg. kg. kg.2 kg T kg 2.8 kg 24.6 kg 24.8 kg T kg. kg 26.7 kg 27. kg T kg 5.2 kg 29. kg 29.4 kg 835 mm / in 45 mm / 6.34 in / 3.3 in 85 mm / 8 (.7) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 62 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 63

33 OLLEI TYPE T-Dies 3, =8 (3.5) OLLEI TYPE T-Dies 3, = (4.72) T (3.5) 8 (.7) (.24) 6 3 (.55).6 (.24) 35 kn/m max. T kn/m max. 835 mm in 2.4 kg 835 mm in 3. kg 45 mm 6.34 in 6.5 kg (.3) 8.8 (.3) 45 mm 6.34 in 6.5 kg 85 mm 3.29 in.8 kg 2. kg 8 (3.5) 8 (.7) 3 8 (.7) 85 mm 3.29 in 2.4 kg 2.6 kg T.6.3 (4.72) (.24) 6 3 (.55).6 (.24) 35 kn/m max. 835 mm in 6. kg 45 mm 6.34 in 8. kg 5.2 kg 5.4 kg T.8.3 (4.72) (.3) (.7).8 (.3) 35 kn/m max. 2 8 (.7) 835 mm in 9. kg 45 mm 6.34 in 9.5 kg 8. kg 8.3 kg 8 (.7) T..3 (.39) 3. (.39) 5 kn/m max. T.2.3 (.47) (.59) kn/m max. (4.72) 24 (.94) 24 (.94) 8 (.7) (4.72) 8 (.7) T8..3 (.39) 3. (.39) 5 kn/m max. 835 mm in 6. kg 45 mm 6.34 in 8. kg 5.2 kg 5.4 kg T8.2.3 (.47) (.59) kn/m max. 835 mm in 6. kg 45 mm 6.34 in 8. kg 5.2 kg 5.4 kg 835 mm in 22. kg 45 mm 6.34 in.9 kg.9 kg 2.2 kg 835 mm in 22. kg 45 mm 6.34 in. kg.9 kg 2.2 kg 8 (3.5) 24 (.94) 8 (3.5) 24 (.94) 8 (.7) 8 (.7) T (3.5) (.63) (.8) 2. (.79) 45 kn/m max. T kn/m max. 835 mm in 8. kg 835 mm in 8. kg 45 mm 6.34 in 8.9 kg (.79) 2.5 (.98) 45 mm 6.34 in 8.9 kg 85 mm 3.29 in 7. kg 7.3 kg 8 (3.5) 3 35 (.38) 85 mm 3.29 in 7. kg 7.3 kg T.6.3 (4.72) (.63) (.79) 45 kn/m max. 835 mm in 25.8 kg 45 mm 6.34 in 2.8 kg 24.6 kg 24.9 kg T..3 (4.72) (.79) (.98) 5 kn/m max. 835 mm in 28. kg 45 mm 6.34 in. kg 26.7 kg 27. kg 8 (.7) 8 (.7) 3 (.8) 35 (.38) 8 (.7) 8 (.7) T (3.5) 8 (.7) 25 (.98) 3 (.57) 3. (.8) 5 kn/m max. 835 mm in. kg 45 mm 6.34 in. kg 9. kg 9.3 kg s Please note that delivery time varies according to your location. T.25.3 (4.72) 8 (.7) 25 (.98) 3 (.57) 3. (.8) 5 kn/m max. 835 mm in 3.5 kg 45 mm 6.34 in 5. kg 29. kg 29.4 kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 64 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 65

34 OLLEI TYPE T-Dies 26, =8 (3.5) OLLEI TYPE T-Dies 26, = (4.72) T.6.26 (.24) (.3) kn/m max. T.8.26 kn/m max. 835 mm in 8. kg 835 mm in 9. kg 45 mm 6.34 in 9. kg (.3) 8. (.39) 45 mm 6.34 in 9.5 kg 85 mm 3.29 in 7. kg 7.3 kg mm 3.29 in 8. kg 8.3 kg 2 (4.72) 6 (.63) (4.72) (.79) 8 (.7) 8 (.7) T (3.5) 8 (.7) (.24) (.63).8 (.3) kn/m max. T kn/m max. 835 mm in. kg 835 mm in 5. kg 45 mm 6.34 in 7. kg (.3) 8. (.39) 45 mm 6.34 in 7.5 kg 85 mm 3.29 in 3.3 kg 3.5 kg 8 (3.5) 8 (.7) 26 (.79) 85 mm 3.29 in.3 kg.5 kg T..26 (4.72) (.39) (.94).2 (.47) kn/m max. T.2.26 kn/m max. 835 mm in 22. kg 835 mm in 22. kg (.47) 2.6 (.63) 45 mm 6.34 in. kg 45 mm 6.34 in. kg 26 (.2) 8 (.7) (4.72) 26 8 (.7) 85 mm 3.29 in.9 kg 2.2 kg 85 mm 3.29 in.9 kg 2.2 kg T (3.5) (.39) (.94).2 (.47) kn/m max. T kn/m max. 835 mm in 5.5 kg 835 mm in 6.6 kg 45 mm 6.34 in 8. kg (.47) 2.6 (.63) 45 mm 6.34 in 7.5 kg 85 mm 3.29 in.8 kg.9 kg 8 (3.5) (.2) 85 mm 8 (.7) 3.29 in 5.8 kg 6. kg 8 (.7) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 66 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 67

35 OLLEI TYPE -V Dies, -V Dies, 8 OLLEI TYPE M (.26) 4 (.57) kn/m max. 835 mm in 2.6 kg 45 mm 6.34 in.7 kg.6 kg.8 kg M6.85. (.57) 4 (.57) kn/m max. 835 mm in. kg 45 mm 6.34 in.5 kg 9. kg 9.3 kg M (3.74) (3.94) 8 8 (.35) kn/m max. 835 mm in 46.2 kg 45 mm 6.34 in 22.9 kg 44. kg 44.5 kg 2 (.79) (4.72) M (.97) 4 (.57) kn/m max. 835 mm in 9. kg 45 mm 6.34 in 9.5 kg 8. kg 8.3 kg M (2.95) (.79) 63 (2.48) 5 (.97) kn/m max. 835 mm in 29.2 kg 45 mm 6.34 in.5 kg 27.8 kg 28. kg MK (4.92) 8 7 kn/m max. M (4.6) 25 (4.92) 8 kn/m max. 5 (.59) 8 (3.5) (.79) 54 (6.6) 9 (3.54) 54 (6.6) M (3.5) 6 (.236) kn/m max. 8 (3.5) MK kn/m max. M3.8.6 kn/m max. (.79) 6 (6.3) (.394) 95 (3.74) (.79) 3 (5.2) 3 (4.6) 5 (.59) (.79) 835 mm in 33.5 kg 45 mm 6.34 in 6.6 kg 3.9 kg 32.2 kg 835 mm in 62. kg 45 mm 6.34 in 3. kg 59. kg 59.8 kg 835 mm in 64.9 kg 45 mm 6.34 in 32.2 kg 6.4 kg 62.5 kg 6 (6.3) (.394) 3 (5.2) 8 8 (.79) 85 (7.28) 9 (3.54) 85 (7.28) 835 mm in 93. kg 45 mm 6.34 in 46.5 kg 88.5 kg 89.7 kg 835 mm in 93. kg 45 mm 6.34 in 46.2 kg 88.5 kg 89.7 kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 68 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 69

36 OLLEI TYPE -V Dies, 7 -V Dies, 6 OLLEI TYPE M95.7. (7.87) 5 (.59) 42Cr: 9-5 N/mm 2 8 kn/m max. 45 mm 6.34 in. kg M (2.48) 5 (.97) kn/m max. 835 mm in 34. kg 45 mm 6.34 in 7. kg 32.4 kg 32.8 kg M (3.5) 6 (.236) kn/m max. 835 mm in 53. kg 45 mm 6.34 in 26.5 kg 5.5 kg 5. kg 2 86 (3.39) 6 (4.33) 25 (.98) 95 (7.68) 6 (.79) (.79) 7 86 (3.39) (4.33) (4.72) 25 (9.84) -V Dies, 45 M (.26) 4 (.57) kn/m max. 835 mm in 27.5 kg 45 mm 6.34 in 3.7 kg 26.2 kg 26.5 kg M8.45. (.57) 4 (.57) kn/m max. 835 mm in 3.9 kg 45 mm 6.34 in 6.5 kg 29.4 kg 29.8 kg 8 (3.5) 45 8 (3.5) 45 (.79) 75 (2.95) M kn/m max. 8 (3.5) 5 (.97) 45 4 (.57) 835 mm in 3. kg 45 mm 6.34 in 5.5 kg 29.5 kg 29.9 kg For the application of dies olleri Type use the adapters on pages (.79) 85 (3.35) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 7 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 7

37 OLLEI TYPE OLLEI TYPE Multi-V Dies Multi-V Dies M6.9. (.24) 6.4 (.6) 9 9 (.39).6 (.24) kn/m max. 835 mm in. kg 45 mm 6.34 in. kg 9. kg 9.3 kg M6.9.2 (.3) 8.5 (.) 9 9 (.47) 2.8 (.3) T kn/m max. kn/m max. 835 mm in 2. kg 45 mm 6.34 in. kg. kg.2 kg 68 (2.68) 6 (.24) 6 (.24).4 (.6).5 (.) (.3) 8 (.3) 8 (.79) 6 (.63) 25 (.98) 68 (2.68) 3 (.8) 2.75 (.8) (.39) 2 (.47) (.47) 2 (.47) 2.8 (.3) 2.75 (.8) 525 mm.67 in 7.5 kg 495 mm 9.49 in 6.5 kg 42Cr: 9-5 N/mm 2 T (2.68) 6 (.24) 6 (.24).5 (.).8 (.3) (.3) 8 (.3) 8 (.79) 3 (.8) 6 6 (.63) 25 (.98) 68 (2.68) 2.75 (.8) (.39) 2 (.47) (.47) 2 (.47) 2.8 (.3).8 (.3) 525 mm.67 in 6.8 kg 495 mm 9.49 in 5.8 kg 42Cr: 9-5 N/mm 2 V kn/m max M (.79) (.39) (.24) 6.5 (.59) 8 (.7) 3 (.8) kn/m max. 835 mm in. kg 45 mm 6.34 in. kg 9. kg 9.3 kg M (.79) 22 (.87) 5 (.97) 3 (.8) 35 (.38) 6 (.63) 2 (.79) 2 (.79) 8 kn/m max. 835 mm in 5.7 kg 45 mm 6.34 in 7.7 kg.9 kg 5. kg T (2.68) 6 (.24) 6 (.24).8 (.3) (.39) (.3) 8 (.3) 8 (.79) 3 (.8) 45 6 (.63) 25 (.98) 68 (2.68) 2.75 (.8) (.39) 2 (.47) (.47) 2 (.47) 2.2 (.47).6 (.63) 525 mm.67 in 6. kg 495 mm 9.49 in 5.2 kg 42Cr: 9-5 N/mm 2 V kn/m max T (2.68) 6 (.24) 6 (.24).8 (.3) (.39) (.3) 8 (.3) 8 (.79) 3 (.8) 35 6 (.63) 3 (.8) 25 (.98) 68 (2.68) (.39) 2 (.47) (.47) 2 (.47) 2.2 (.47).6 (.63) 525 mm.67 in 5.3 kg 495 mm 9.49 in.4 kg 42Cr: 9-5 N/mm 2 V kn/m max M.46 M (.79) 22 (.87) 5 (.97) 3 (.8) 35 (.38) 6 (.63) 2 (.79) 2 (.79) 8 kn/m max. 6 kn/m max. 835 mm in 5.8 kg 45 mm 6.34 in 7.8 kg 5. kg 5.2 kg 2 (.79) 6 (.63) 35 (.38) 3 (.8) 6 22 (.87) (.39) 2.5 (.98).5 (.59) 835 mm in 8. kg 45 mm 6.34 in 9. kg 7. kg 7.3 kg U-T7 38 (.5) PB-T7 525 mm.67 in 2.4 kg mm.79 in.2 kg per pair Fe37 (4.72) M8 45 (.77) M.49 2 (.79) 9 (3.54) (.79) 6 9 (3.54) 5 (.) (.8) kn/m max. 835 mm in 38.9 kg 45 mm 6.34 in. kg 37. kg kg (.57) M (.79) 9 (3.54) (.79) 6 9 (3.54) 7 (2.76) 5 (.) (.8) 6 kn/m max. 835 mm in 35.9 kg 45 mm 6.34 in 8. kg 34.2 kg kg (.57) pecial Punches and Dies see pages (.77) 4 (.57) 45 (.77) 4 (.57) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 72 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 73

38 ynthetic Dies OLLEI TYPE emming Dies OLLEI TYPE TN8. 75 (2.95) 8 (.7) 5 (.59) (.55) 24 (.94) IN... kn/m max. kn/m max. 835 mm in 5. kg 835 mm in.3 kg 45 mm 6.34 in 7.5 kg V 45 mm 6.34 in.5 kg 5 (.) (.79) α (.55) 24 (.94) Model α V V IN IN IN IN IN IN Model α V V IN IN IN IN IN TOP.M / TOP.M (3.5) 59 (2.32) 8 (.3) (.39) 525 mm.67 in 7.5 kg 495 mm 9.49 in 6.5 kg 42Cr: 9-5 N/mm 2 TOP.M (3.5) 59 (2.32) (.39) (.39) 525 mm.67 in 8. kg 495 mm 9.49 in 6.9 kg 42Cr: 9-5 N/mm 2 2 TN8. 75 (2.95) 8 (.7) 9 (.75) (.79) 35 (.38) IN... kn/m max. kn/m max. 835 mm in 9. kg 835 mm in. kg 45 mm 6.34 in 9.5 kg V 45 mm 6.34 in. kg 5 (.) 24 (.94) α (.79) 35 (.38) Model α V V IN IN IN IN IN IN IN IN IN IN Model α V V IN IN IN IN IN IN IN TOP.M (3.5) 59 (2.32) (.39) 2 (.47) 525 mm.67 in 6.8 kg 495 mm 9.49 in 5.9 kg 42Cr: 9-5 N/mm 2 Compatible emming Punches see page 28 TN (3.) 8 (.7) 3 (.8) (.43) 9 (.75) 38 (.5) 3 (.8) 5 (.97) kn/m max. 835 mm in 25. kg 45 mm 6.34 in 2.5 kg For advantages and mounting examples see Mark-Free bending Chapter on pages IN (.47) 3 (.22) 9 (.75) V α 3 (.8) 38 (.5) Model α V V IN IN IN IN IN IN IN IN IN IN IN IN IN kn/m max. 835 mm in.5 kg 45 mm 6.34 in.25 kg Model α V V IN IN IN IN IN IN IN IN IN IN IN Example of application 5 kn/m max. kn/m max. mm in mm in.45 Kgf/mm 2 t/m.7 Kgf/mm 2 t/m mm 2X in mm in.45 Kgf/mm 2 t/m.7 Kgf/mm 2 t/m Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 74 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 75

39 OLLEI TYPE pring-loaded emming Dies OLLEI TYPE Pneumatic emming Dies.35.6 (3.98) 6 (2.) 3 (.5) (.35) (.35) (.24) 35 (.39) 6 kn/m max. 835 mm in 3. kg 45 mm 6.34 in 5.4 kg C45: 8-85 N/mm (3.98) 6 (2.) 3 (.5) (.3) (.3) (.3) 35 (.39) 6 kn/m max. 835 mm in 3. kg 45 mm 6.34 in 5. kg C45: 8-85 N/mm 2 KPN per piece ccessories for pneumatic hemming dies. kg mm in mm in.45 Kgf/mm 2 t/m.7 Kgf/mm 2 t/m mm 2X in mm in.45 Kgf/mm 2 t/m.7 Kgf/mm 2 t/m (3.98) 6 (2.) 3 (.5) (.28) 7 7 (.28) (.39) 35 (.39).3.8 PN.35.6 PN kn/m max. 8 kn/m max. 6 kn/m max. 6 kn/m max. 835 mm in 3. kg (.33) (.43) (.3) mm in 3. kg (.35) (.35) 835 mm in 3. kg (.3) (.3) 835 mm in 3. kg (.59) (.24) (.3) 45 mm 6.34 in 5.5 kg 45 mm 6.34 in 5. kg (.39) 45 mm 6.34 in 5.5 kg (.39) 45 mm 6.34 in 5.5 kg C45: 8-85 N/mm 2 (4.33) 5 (.59) 65 (2.56) C45: 8-85 N/mm 2 (3.98) 3 (.5) 6 (2.) (3.98) 6 (2.) 3 (.5) (.5) 3 (.3) 8.5 (.59) PN PN.26.8 kn/m max. kn/m max. 6 kn/m max. kn/m max. 835 mm in 39.8 kg (.3) mm in 4.5 kg (.39) (.28) 7 7 (.28) 835 mm in 29. kg (.5) mm in 39.8 kg (.7).5 (.39) (.3) mm 6.34 in 2. kg (.59) 45 mm 6.34 in.7 kg (.39) 45 mm 6.34 in 5.5 kg (.59) 45 mm 6.34 in 2. kg 35 (5.3) 5 (.59) (5.3) 5 (.59) (3.98) 6 (2.) 3 (.5) C45: 8-85 N/mm 2 C45: 8-85 N/mm (5.3) 5 (.59) 26 42Cr: 9-5 N/mm 2 77 (3.3) 77 (3.3) 77 (3.3) Our dvantage Your Convenience 35PN PN (5.3) 5 (.59) 77 (3.3) (.3) (.28) (.47) 2 (.79) 26 kn/m max. kn/m max. kn/m max. 835 mm in 4. kg (.3) mm in 4.5 kg (.3) (.28) 835 mm in 4. kg (.39) (.47) 2 (.7) 45 mm 6.34 in.5 kg.5 45 mm 6.34 in.7 kg (.79) 45 mm 6.34 in.5 kg (.59) C45: 8-85 N/mm 2 The emming Dies can also be used as standard dies. Therefore, the spring is secured with help of a mechanical system. olleri Videos demonstration of hemming dies at: videos/hemming-dies Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 76 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location (5.3) 77 (3.3) 5 (.59) (5.3) C45: 56-7 N/mm 26 2 The complete pneumatic system is located within the die. 5 (.59) 77 (3.3)

40 OLLEI TYPE dpater ails for Dies Die dapters OLLEI TYPE C / / C 25/ / C 3/ / C / TC / / TC 25/ / TC 3/ / TC / 27 (.6) 2 (.47) M8 35 (.38).5 (.8) M8 D5 3. (.52).5 (.8) kn/m max. mm in 26. kg 5 mm 9.68 in 3. kg olleri Type olleri Type 2/3 D6 3 (.8) 3. (.52).5 (.8) kn/m max. mm in 2. kg 5 mm 9.68 in 6. kg olleri Type olleri Type 2/ (3.82) 3. (.52) Model Length Length Weight C / kg C 25/ kg C 3/ kg C / kg Model Length Length Weight TC / 2 mm kg TC 25/ 26 mm kg TC 3/ 3 mm kg TC / 4 mm kg D7 kn/m max. 835 mm in 8. kg 45 mm 6.34 in 9. kg D9-2.7 kn/m max. 835 mm in 9.6 kg 45 mm 6.34 in 9.7 kg C 5/ C 5/ (.57) olleri Type 2/3 olleri Type (.57) olleri Type X LVD olleri Type (.79) 3 (.5) 9 (.75) 7 (.28) 2.7 (.5) 3 (.8) (.39) 8 (3.5) M8 3 (.8) (.39) 8 (3.5) 2 (.8) M8 Do you have further queries about delivery times, operational areas, and other options? Give us a call! Model Length Length Weight C 5/ kg C 5//C kg Model Length Length Weight C 5/ 5 mm kg C 5//C 5 mm kg Die Extensions C 5-9 CT6 2 (.47) kn/m max. 835 mm in 29. kg 45 mm 6.34 in.5 kg 35 (.38) 5 (.59) 55 (2.7) 9 (3.54) (4.72) Model Length Length Weight C kg C 5-9/C kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 78 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 79

41 OLLEI DIE OLL-V Content Explanation 9-9 Model 92 Model 2 93 Model Model 3 94 Model 4 94 djustable Dies 95 emming- and Joggle Tools 95 8

42 DIE OLL-V DIE OLL-V Content Explanation Content Explanation Compatibility Our dvantages Your Convenience VP Dies (Models, 2, 3) are compatible with press brake machines (6 mm / 2.36 in die holder) from: CL, ccurpress, M Machinery, mada, tlantic, dira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, aco, industan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, ico, afan, alvagnini, chiavi, MD, org, omo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc. V Dies (Models, 2, 3) are compatible with press brake machines ( mm /.55 in pins) from: mada ingle V style VT Dies (Models, 2, 3) are compatible with press brake machines (2.7 mm /.5 in / 3 mm /.5 in pins) from: Bystronic, ämmerle, Beyeler, Edwards, afan, MD, Trumpf VT9 Dies (Models, 2, 3) are compatible with press brakes machines (2.7 mm /.5 in pins) from: LVD VM Dies (Models 2.5, 3, 4) are compatible with all press brake machines (various die holders) all dies are compatible on other press brakes machines with the means of adapter-systems or customized die holders. Material high precision grounded Interchangability guaranteed exact Parallelism avoiding bending marks on the sheet metals minimum borders bending mark free no tool contamination throughout the bending of galvanized sheet metal or aluminum extremely short flanges less tool exchange ideal for diagonal or tapered edges Tool lengths and sectioning tandard (7.32) (7.72) egmented tools are delivered in complete sets. ingle pieces are also available! More lengths and sectionings are possible upon request. 5 mm (9.68 in) mm (7.87 in) Model, 4 mm (7.32 in) (7 segments) Model 2, 45 mm (7.72 in) (7 segments) Model 2.5, 47 mm (8.5 in) (6 segments) The raw material is obtained from qualified suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength. Model Material Type ardness of the material and the tool body ardness of the operating surfaces after induction hardening Body / 2 / 2.5 / 3 / 4 42CrMo4 - N/mm C Inserts Toolox 44 5 N/mm 2 through hardened 44 C Inserts 2 / 2.5 / 3 / 4 Toolox 33 N/mm C 47 (8.5) Model 3, 455 mm (7.9 in) (5 segments) 8 pecifications for the maximum press force kn/m are indicated as such, t = kn. 455 (7.9) Model Max. recommended thickness =.5 mm (.6 in) (2. mm /.8 in possible) Model 2 Max. recommended thickness =3. mm (.2 in) (4. mm /.5 in possible) Model 2.5 Max. recommended thickness =5. mm (. in) (6.35 mm /.24 in possible) Model 3 Max. recommended thickness =6.3 mm (.25 in) (8. mm /.3 in possible) Equivalent V size mm 8 (.3) 5 (.59) 28 (.) 38 (.5) Material Thickness mm min. outside flange mm needed press force (kn) max. tool load (kn/m) min. bending angle.7 (.3) 3. (.2) 6. (.4) 3.9 (.5) 35.5 (.6) 4.2 (.7) (.8) 8.5 (.33) (.2) 9.3 (.37) (.3) 9.3 (.37) (.2) 8.7 (.74) (.6) 8.7 (.74) (.) 8.7 (.74) (.24) 8.7 (.74) 5 4. (.6) 22.5 (.89) (.24) 22.5 (.89) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 9 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 9

43 DIE OLL-V DIE OLL-V Model Model 2 VP (.2) V8- VP65-2 V8-2 kn/m max. kn/m max. 5 kn/m max. 5 kn/m max. 5 mm 6.68 in 6.9 kg 4 mm 7.32 in 6. kg 28.5 (.2) 5 mm 6.68 in 6.3 kg 4 mm 7.32 in 5.8 kg 4.5 (.63) 5 mm 6.68 in 7.9 kg 45 mm 7.72 in 7.4 kg 4.5 (.63) 5 mm 6.68 in 8.3 kg 45 mm 7.72 in 7.8 kg 42Cr: - N/mm 2 42Cr: - N/mm 2 42Cr: - N/mm 2 42Cr: - N/mm 2 8 (3.5) 65 (2.56) 8 (3.5) (.55) (.55) VT (.2) VT9- VT6-2 VT9-2 kn/m max. kn/m max. 5 kn/m max. 5 kn/m max. 5 mm 6.68 in 5.5 kg 4 mm 7.32 in 5. kg 28.5 (.2) 5 mm 6.68 in 8.5 kg 4 mm 7.32 in 7.8 kg 4.5 (.63) 5 mm 6.68 in 7.9 kg 45 mm 7.72 in 7.4 kg 4.5 (.63) 5 mm 6.68 in.3 kg 45 mm 7.72 in.6 kg 55 (2.7) 42Cr: - N/mm 2 42Cr: - N/mm 2 42Cr: - N/mm 2 42Cr: - N/mm 2 9 (3.54) 9 (3.54) 3 (.5) 3 (.5) (.28) (.5) (.28) (.5) VT- (3.94) 28.5 (.2) 42Cr: - N/mm 2 VT-2 kn/m max. 5 kn/m max. 5 mm 6.68 in 9.4 kg 4 mm 7.32 in 8.6 kg Ideal for thick material! Making the impossible, possible... (3.94) 4.5 (.63) 5 mm 6.68 in 2.4 kg 45 mm 7.72 in.7 kg 42Cr: - N/mm (.5) 3 (.5) Model 2.5 VM (2.56) kn/m max. 5 mm 6.68 in 22. kg 47 mm 8.5 in 2. kg 42Cr: - N/mm 2 (3.94) olleri Videos Use and application of olla-v dies Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 92 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 93

44 DIE OLL-V DIE OLL-V Model 3 djustable Dies VP-3 (3.94) 9 (3.54) 25 kn/m max. 5 mm 6.68 in 28.8 kg 455 mm 7.9 in 26.2 kg 42Cr: - N/mm 2 VM7-3 7 (2.76) 9 (3.54) 25 kn/m max. 5 mm 6.68 in.6 kg 455 mm 7.9 in 8.7 kg 42Cr: - N/mm 2 Possible Die olders: - 6 mm (2.36 in) - 3 mm (.5 in) pin mm (.5 in) pin mm (.5 in) offset pin Our advantages Your Convenience bending possible up to the thickness of 3 mm (.8 in) inserts hardened no bending marks adjustable openings VPV3 = mm ( in) VD3 = 39-8 mm ( in) VPV4 = 69-8 mm ( in) bends laser-cut sheet metal without damaging the tool exact inner radius VPV3 (3.94) 42Cr: - N/mm ( ) 2 (8.27) 25 kn/m max. 5 mm 6.68 in 5. kg mm 7.87 in. kg VT-3 9 (3.54) 25 kn/m max. 5 mm 6.68 in 3.9 kg 455 mm 7.9 in 28.5 kg VD3 42Cr: - N/mm 2 VD4 35 kn/m max. kn/m max. 5 mm 6.68 in 98. kg mm 7.87 in 38. kg 5 mm 6.68 in. kg 42Cr: - N/mm 2 mm 7.87 in 8. kg 42Cr: - N/mm ( ) 39-8 ( ) (4.72) 5 (5.9) (3.94) 324 (2.76) 5 (.8) 3 (.5) Model 4 8 Our dvantages Your Convenience The model 4 tools and the adjustable dies are for bending thick material and large radii. Material specifications vary greatly, therefore no specific data can be given. Minimum borders are highly dependant on the squareness of the component. Enlargement and hole distortion will be greatly reduced, however will be influenced depending on the type of material adius bending is strongly influenced by the elastic return of specific material and flange-size. For advice please contact us! VM9-4 9 (3.54) 7 (6.69) 85 (3.35) 3 kn/m max. 5 mm 6.68 in 56.6 kg mm 7.87 in 22.7 kg 42Cr: - N/mm 2 V-Bending flat inserts emming- and Z-Tools emming Tool adius-bending flat inserts Production according to your specifications Conical Bending flat inserts Joggle Tool adius-overbending concave inserts U-Bending V-inserts per piece Price upon request per piece Price upon request Production according to your specifications 42Cr: - N/mm 2 42Cr: - N/mm 2 Possible Die olders: - 6 mm (2.36 in) - 3 mm (.5 in) pin mm (.5 in) pin mm (.5 in) offset pin Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 94 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 95

45 OLLEI CLMPING YTEM Content Explanation 98 Intermediates 99 Clamps - OL-ystem for Punches olleri Type 2-3 OL-ystem for Punches olleri Type 4-5 OL4-ystem for Punches olleri Type 5 W-OL PN-ystem for Punches olleri Type 2 6 OL3-ystem for Punches olleri Type 3 and X 7 OL2-ystem for Dies olleri Type 8-9 Movable Die Clamps for Dies olleri Type 9 9

46 OLLEI CLMPING YTEM OLLEI CLMPING YTEM Content Explanation Intermediates tandard-clamping for Punches olleri Type made of: Tensioning device + intermediate dual sided clamping (KD-ystem) horizontal tool exchange see pages 99- horizontal CLMPING Press Brake Crowning Wedge Intermediate Clamp D4 9 (3.54) 3 (.8) 3 (.22) 3 7 (.28) (.5) 6 (.24) 3 (.5) kn/m max. 5 mm 5.9 in.8 kg without wedge crowning Punch extension INT FIO (3.94) (.57) 3 7 (.28) (.5) (.57) (.55) kn/m max. 5 mm 5.9 in 4. kg without wedge crowning Punch extension INT (3.94) (.57) 3 7 (.28) (.5) (.57) (.55) kn/m max. 5 mm 5.9 in 3.5 kg Wedge crown OL Clamping for Punches olleri Type vertical tool exchange can be used without modifying Punches olleri Type safety guard including selectable intermediates manual and pneumatic models available see pages 2-3 OL Clamping vertical for Punches olleri Type vertical vertical tool exchange modification necessary: Punches olleri Type are equipped with spring-loaded balls safety guard including selectable intermediates manual, pneumatic and hydraulic models available dual sided clamping (KD-ystem) see pages 4-5 OL4 Clamping for Punches olleri Type horizontal tool exchange can be used without modifying Punches olleri Type safety guard including selectable intermediates manual and hydraulic models available dual sided clamping integrated see pages 5 horizontal Punch olleri Type W-OL PN Clamping for Punches olleri Type 2 vertical tool exchange with vertical OL-ystem and QuickLock-ystem Punches with afety-pins are inserted horizontal safety guard pneumatic model available only see page 6 OL3 Clamping for Punches olleri Type 3/X vertical or horizontal tool exchange custom manufacturing safety guard hydraulic model available only see page 7 OL2 Clamping vertical for Dies olleri Type manual, pneumatic and hydraulic models available see pages 8-9 Movable Die Clamps for Dies olleri Type manual model available only see page 9 horizontal horizontal INT- (3.94) 3 (.5) (.79) (.57) 53 (2.9) (.55) INT kn/m max. kn/m max. 3 7 (.28) (.5) (3.94) (.57) (.57) (.55) INT5- INT5 kn/m max. INT--D 6 kn/m max. INT-D 6 kn/m max. 5 (5.9) (.57) 3 7 (.28) (.5) (.57) (.55) 5 mm 5.9 in 5.2 kg 5 mm 5.9 in 4.5 kg Wedge crown (4.72) (.57) 53 (2.9) 27 (.6) 5 (5.9) 3 (.79) (.5) (.57) 53 (2.9) (.55) kn/m max. 5 mm 5.9 in 5.9 kg 5 mm 5.9 in 5.2 kg 5 mm 5.9 in 4.5 kg 3 (.79) 3 7 (.28) (.5) (.5) 42Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm 2 Wedge crown Wedge crown Intermediates available upon request also in L=7 mm (2.76 in). Wedge crown eavy Duty (4.72) (.57) (.57) 27 (.6) 5 mm 5.9 in 8. kg Wedge crown Wedge crown eavy Duty Please ask for delivery time! kg = 2. Pounds (lb) = Ounzes (oz) mm = 3.94 Inch =.33 Feet (ft) s Please note that delivery time depends on your location. 99

47 OLLEI CLMPING YTEM OLLEI CLMPING YTEM Clamps Clamps Our dvantages Your Convenience apid Clamping ystems allow a fast horizontal tool exchange Plastic Pressure trip improves the clamping especially with short tool pieces. needed clamps Length of press brake 4 pieces 835 mm (32.87 in) 6 pieces 25 mm (49.2 in) pieces 2 mm (82.68 in) pieces 26 mm (2.36 in) 6 pieces 3 mm (22.5 in) 2 pieces 4 mm (6.42 in) KD per piece.5 kg includes a tensioning device without intermediates Fe37: N/mm 2 Intermediate Crowning Wedge T5 / T5 / TG5 7 (.67) (.43) T5 T5 TG5.7 kg.5 kg.7 kg T6 / T6 / TG6 7 (.67) (.43) T6 T6 TG6.8 kg.85 kg.8 kg L=5 mm (5.9 in) L=5 mm (5.9 in) Fe37: N/mm 2 Fe37: N/mm 2 (3.94) 5 (5.9) (3.94) 5 (5.9) T5 T5 TG5 T6 T6 TG6 KD 5 (.97) 5 (.97) 5 (.97) (.59) 5 (.59) 5 (.59) 5 Plastic Pressure trip (.59) 5 (.59) 5 (.59) 5 Plastic Pressure trip TL6 / TL6 / TLG6 Compatible Intermediates on page 99 TL6 TL6 TLG6. kg.8 kg. kg TX6 / TX6 / TXG6 TX6 TX6 TXG6.85 kg.5 kg. kg OL CLMP3 manual hydraulic pneumatic Intermediate Crowning Wedge horizontal Model OL CLMP3 manual with Intermediate INT INT INT5 INT FIO INT- OL CLMP3 manual without Intermediate 9 7 (.67) (.43) TL6 (3.94) 5 (5.9) TL6 TLG6 L=5 mm (5.9 in) L=5 mm (5.9 in) 7 (.67) Fe37: N/mm 2 (.43) Fe37: N/mm 2 TX6 (3.94) 5 (5.9) TX6 TXG6 Clamp Example of manual model Compatible for tandard Punches olleri Type horizontal horizontal Model OL CLMP3 hydraulic Model OL CLMP3 pneumatic with Intermediate INT INT INT5 INT FIO INT- with Intermediate INT INT5 L=5 mm (5.9 in) horizontal tool exchange including selectable intermediates (.67) 7 (.67) 7 (.67) 7 Plastic Pressure trip (.6) 5.5 (.6) 5.5 (.6) 5.5 Plastic Pressure trip olleri Videos pplication of Clamping ystem OL CLMP3: videos/rol-clamp3 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location.

48 OLLEI CLMPING YTEM OLLEI CLMPING YTEM OL-ystem for Punches olleri Type OL-ystem for Punches olleri Type the newest innovation from our esearch and Development Department fast vertical tool exchange for all Punches olleri Type can be used without modifying Punches olleri Type safe and fast tool exchange OL manual Model OL manual with Intermediate INT INT INT5 INT FIO significant savings on your setup costs no falling out of tools vertical L=5 mm (5.9 in) vertical tool exchange including selectable intermediates available in manual and pneumatic models Mounting: imply from the bottom into the housing, tighten DONE! Disassembly: Untighten, gently lift tool and remove downwards. Easy to mount on your press brake. conversion of the press brake is not necessary. For Press Brake Machines and Punches olleri Type : (CL, ccurpress, M Machinery, mada, tlantic, dira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, aco, industan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, ico, afan, alvagnini, chiavi, MD, org, omo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.) The OL-ystem is suited for tandard-punches. There are no modifications necessary! OL pneumatic s Please note that delivery time varies according to your location. vertical Model OL pneumatic with Intermediate INT INT INT5 INT FIO L=5 mm (5.9 in) vertical tool exchange including selectable intermediates 9 Pneumatic connection Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 2 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 3

49 OLLEI CLMPING YTEM OLLEI CLMPING YTEM OL-ystem for Punches olleri Type OL-ystem for Punches olleri Type In order to use the OL ystem, the punches are modified and equipped with spring-loaded balls. OL can be used on all press brakes with standard tang intermediates of olleri Type. Our dvantages Your Convenience Intermediate Crowning Wedge Clamp OL YD CLMP hydraulic Model OL YD CLMP with Intermediate INT INT INT5 INT FIO INT- L=5 mm (5.9 in) vertical tool exchange including selectable intermediates vertical OL KD Model OL KD with Intermediate INT INT INT5 INT FIO INT- with Clamp vertical with Clamp3 horizontal L=5 mm vertical tool exchange including selectable intermediates vertical clamping of tools is possible on press brakes thanks to a row of spring-loaded balls which are also used as safety guards to prevent the falling out of tools. complete mechanic functioning fast clamping system for press brake machines. Productivity and Versatility of the press brake machines will be increased. ignificant reduction in the set-up times when changing tools The system was designed on a press brake machine setup, that allows a maximal distance of 7 mm from the correlating clamping systems (upper and lower). The minimal number of spring-loaded balls in the clamping system should be considered, if the distance is larger than 7 mm. The minimal amount of spring-loaded balls,depends on the weight and the length of each tool. Detailed information about intermediates on page 99 Punch with spring-loaded balls OL CLMP manual Model OL CLMP OL CLMP without Intermediate with Intermediate INT INT INT5 INT FIO INT- L=5 mm (5.9 in) vertical tool exchange including selectable intermediates vertical OL PN CLMP pneumatic Model OL PN CLMP with Intermediate INT INT5 L=5 mm (5.9 in) vertical tool exchange including selectable intermediates vertical OL4-ystem for Punches olleri Type OL4 manual Model OL4 manual with Intermediate INT INT INT5 INT FIO L=5 mm (5.9 in) horizontal tool exchange including selectable intermediates integrated KD-ystem horizontal OL4 hydraulic Model OL4 hydraulic with Intermediate INT INT INT5 INT FIO INT- L=5 mm (5.9 in) horizontal tool exchange including selectable intermediates integrated KD-ystem horizontal 9 Mounting example Intermediate INT Clamp OL CLMP Punch olleri Type with spring-loaded balls olleri Videos pplication of Clamping ystems OL CLMP: videos/rol-clamp olleri Videos pplication of hydraulic clamping OL4 rol4-hydraulic-clamping The OL4-ystem is suitable for tandard-punches olleri Type. There are no modifications necessary! Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 4 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 5

50 2 OLLEI CLMPING YTEM W-OL PN for Punches olleri Type 2 W-OL PN pneumatic 55 mm.28 in 26.8 kg/m vertical Our dvantages Your Convenience vertical tool exchange of punches with: - OL-ystem - QuickLock-ystem orizontal tool exchange of punches with safety pins significanly more efficient bending productivity 3/X OLLEI CLMPING YTEM OL3-ystem for Punches olleri Type 3 and X OL3 YD hydraulic vertical horizontal 5 mm 9.68 in Our dvantages Your Convenience can be used on press brake machines with different tang types custom manufacturing possible upon request significantly more efficient bending productivity Equip your press brake with our OL3 system in order to use the advantages of a hydraulic clamping system! Examples of OL3 with various systems (.57) (.57) 9 35 (.38) 35 (.38) 3 (5.2) 3 (5.2) 79 (3.) 8 (3.5) for Type Beyeler-F for Type Beyeler-F for Type Beyeler- for Type Beyeler- for Type LVD for Type merica vertical tool exchange horizontal tool exchange Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 6 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 7

51 OLLEI CLMPING YTEM OLLEI CLMPING YTEM OL2-ystem for Dies olleri Type OL2-ystem for Dies olleri Type Explanations pplication The OL2 ystem is a system which is used to secure the die into place. It is made up of a special bar (known as OL2 CLMP, L=5 mm / 9.68 in), which is operated through a centralized lever. The OL2 ystem has a built in spring mechanism and the clamp plates OL2 CLMP are positioned in the inner lining of the system, which can be opened or tightened for the die to be perfectly secured. special rubber insert inside the clamp plates grants the best positioning for the tools. The press force of the clamp plates is evenly distribuited along the complete length. Therefore short tools are also securely fastened. t a press brake of 3 meters (8. in), for example; all dies are secured with 6 simple hand movements. Directly on the die holder with 6 mm / 2.36 in width - use of existing holes for the standard clamp plates (hole distance mm / 3.94 in) - alternatively modifications of the existing threaded holes necessary - system is compatible for press brakes with automatic cowing tables Directly on the die holder with 9 mm / 3.54 in width - use of existing holes for the standard clamp plates (hole distance mm / 3.94 in) - altertively modifications of the existing threaded holes necessary - for the use of dies olleri Type, two 5 mm /.59 in wide inserts are mounted and ground (securing with pins) - with rubber corners, the use of short tools is possible and are perfectly secured. With Die older on the Die ail - 6 x 55 mm / 2.36 x 2.67 in die holder, ground and induction hardened. OL2 manual Clamp incl. Die holder table: 6 mm 2.36 in 38. kg table: 9 mm 3.54 in 58. kg L=75 mm (42.32 in) OL2 pneumatic Clamp incl. Die holder table: 6 mm 2.36 in 23. kg table: 9 mm 3.54 in 3.7 kg L=75 mm (42.32 in) only Clamp table: 6 mm 2.36 in 4. kg table: 9 mm 3.54 in 4.5 kg L=5 mm (9.68 in) only Clamp table: 6 mm 2.36 in 5. kg table: 9 mm 3.54 in 5.5 kg L=5 mm (9.68 in) OL2 hydraulic Clamp incl. Die holder table: 6 mm 2.36 in 23. kg table: 9 mm 3.54 in 3.7 kg L=75 mm (42.32 in) only Clamp table: 6 mm 2.36 in 5. kg table: 9 mm 3.54 in 5.5 kg L=5 mm (9.68 in) Our dvantages Your Convenience fast exchange of tools very time saving reduced production costs significantly increased profitability improved competitiveness Movable Die Clamps for Dies olleri Type Our dvantages Your Convenience lowerable clamping plate significantly easier exchange of tools, due the possibility of removing the tool by sliding it out and not lifting the tool. olleri Videos movable die holders T5-: movable-die-holders 9 T5- per piece.7 kg Fe37: N/mm 2 5 (.97) (.4) 6 (.63) 7 (6.69) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 8 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 9

52 OLLEI DPTE Punch dapters Bolted dapters Die dapter ails 28 Die dapters Modification: Wedge Bar / Tail 22

53 OLLEI DPTE Punch dapters OLLEI DPTE Punch dapters D (4.72) (.57) 5 (.97) (.79) kn/m max. D22 kn/m max. D3 kn/m max. 5 mm 5.9 in 3. kg (.79) 5 mm 5.9 in 3.4 kg 26 (.2) 5 mm 5.9 in 3. kg olleri Type 2 olleri Type 3 Beyeler olleri Type X ET olleri Type olleri Type olleri Type 3 (4.45) 46 (.8) 3 (.22) 36 (.42) (.55) (.55) (5.5) 64 (2.52) 8 (.3) 2 (.83) D (4.72) 7 (.67) (.33) (3.5) 5 (.97) (.79) kn/m max. 5 mm 5.9 in 3.2 kg olleri Type X Gasparini olleri Type (.55) (.55) (.57) 5 (.97) (.55) (.55) D3 3 (4.45) 46 (.8) 3 (.22) 36 (.42) 22 (.86) kn/m max. 5 mm 5.9 in 3.3 kg olleri Type 3 Beyeler olleri Type D (5.5) 62 (2.44) (.55) (.55) (.79) kn/m max. 5 mm 5.9 in 3.4 kg olleri Type 3 Beyeler F olleri Type D5 (3.94) 5 (.97) 8 (.7) 5.5 (.22) 5.5 (.6) kn/m max. 5 mm 5.9 in 4. kg olleri Type X jial- xial olleri Type D kn/m max. 5.9 inch 5.9 in 4. kg olleri Type merican olleri Type (.55) (.57) 5 (.97) (.55) (.55) D 8 (3.5) 3 (.8) 5 (.97) (.57) (.59) kn/m max. Tang : D- 5 mm 5.9 in 3. kg Tang B: D-B 5 mm 5.9 in 3. kg Tang C: D-C 5 mm 5.9 in 3. kg Tang D: D-D 5 mm 5.9 in 3. kg olleri Type X LVD olleri Type Tangs LVD 22 (.87) (.5) 3 (.39) 5 (.) 7 (.67) Tang 32 (.26) 8 (.7) 5 (.59) Tang B (.39) 22 (.87) 37 (.46) 25 (.98) (.39) 27 (.6) 42 (.65) 35 (.38) (.79) 3 (.8) Tang C With adapters you can use the vast amount of Punches olleri Type! Tang D (.39) 32 (.26) D2 (4.72) (.57) 5 (.97) 6 8 (.7) (.55) (.39) D23 kn/m max. kn/m max. 5 mm 5.9 in.5 kg 5 mm 5.9 in 5. kg olleri Type X Colgar 25 (.98) olleri Type X olleri Type Weinbrenner olleri Type 2 (5.59) 42 (.65) 69 (2.72) 3 (.22) 7 (.28) (.39) (.57) (.55) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 22 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 23

54 OLLEI DPTE Punch dapters OLLEI DPTE Punch dapters DX DX2 E D LVD Tangs LVD 22 (.87) (.5) 3 (.39) 5 (.) 7 (.67) Tang 32 (.26) C B (.57) (.55) 8 (.7) 5 (.59) D Tang B (.39) 22 (.87) 2 37 (.46) 25 (.98) olleri Videos kn/m max. 5 mm 5.9 in 3.5 kg Type X olleri Type Producation according to your specifications D9- D D (.28) 3.5 (.5) (.) 3 (.5) 8.4 (.33) (.39) 4 (.6) 6 (.24) 2 (.83) 3 (.8) 9 (3.54) kn/m max. kn/m max. 5 mm 5.9 in 4. kg 5 mm 5.9 in 4. kg (.5) 3 7 (.28) INT- (.5) 3 7 (.28) 5 mm 5.9 in 3.5 kg 3 7 (.28) Type X 3.5 (.5) olleri Type 5 mm 5.9 in 3.5 kg olleri Type 2 (.) olleri Type 2 Producation according to your specifications kn/m max. Tang : D LVD- 5 mm 5.9 in 3.6 kg Tang B: D LVD-B 5 mm 5.9 in 3.8 kg Tang C: D LVD-C 5 mm 5.9 in 4. kg Tang D: D LVD-D 5 mm 5.9 in 4. kg olleri Type X LVD olleri Type 2 (.39) 27 (.6) 42 (.65) Bolted dapters W, P bolted-adapters 35 (.38) (.79) 3 (.8) Tang C Tang D (.39) 32 (.26) D28 3 (.5) 8.4 (.33) 8 (.3) 2 (.83) 7 (.28) (.39) 8 (.7) 26 (.2) 9 (.75) 25 (.98) 64 (2.52) 42 (.65) 3 (.8) 9 (3.54) 3 (.8) 67 (2.64) 27 (5.) 7 (2.76) 7 (4.2) 5 mm 5.9 in 6. kg olleri Type olleri Type X LVD Pneumatic dapters see page 6 kn/m max. 5 mm 5.9 in 5. kg olleri Type X ET olleri Type 2 kn/m max. 5 mm 5.9 in 4.5 kg olleri Type X Weinbrenner olleri Type 2 INT8- E C B (.57) (.55) D [8 (3.5)/(3.94)] INT- / INT- (.57) INT-- (.5) 3 (.79) (.57) (3.94) / (4.72) 3 (.8) (.57) (4.72) 3 (.8) kn/m max. 835 mm in 25. kg 45 mm 6.34 in 2.5 kg kn/m max. INT- 5 mm 5.9 in 5.2 kg suitable Models: - Manual system (T6, TL6, TX6 etc.), see page - Fast Clamping (OL Clamp3), see page - Pneumatic system only on INT- (OL Clamp3 PN), see page - ydraulic system (OL Clamp3 YD), see page horizontal kn/m max. 5 mm 5.9 in 6. kg suitable Models: - Manual system (T6, TL6, TX6 etc.), see page - Fast Clamping (OL Clamp3), see page horizontal INT67-79 E C B (.57) (.55) D [67 (2.64)/79 (3.)] INT-N (Newton) (.57) (.57) (.55) 5.8 (.62) (.2) 3. (.22) (.75) (.55) (3.94) 3 (.8) INT- (merican) (.57) 9 (4.69) kn/m max. 835 mm in.5 kg 45 mm 6.34 in. kg kn/m max. suitable Models: - Manual system (T6, TL6, TX6 etc.), see page - Fast Clamping (OL Clamp3), see page - ydraulic system (OL Clamp3 YD), see page horizontal kn/m max. 5 mm 5.9 in 3.5 kg suitable Models: - Manual system (T6, TL6, TX6 etc.), see page - Fast Clamping (OL Clamp3), see page - ydraulic system (OL Clamp3 YD), see page horizontal Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 2 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 25

55 OLLEI DPTE Bolted dapters OLLEI DPTE Bolted dapters W (.79) (.55).5 (.59) 32 (.26) Do you prefer our QuickLock or OL- ystem? Contact us now! kn/m max. 835 mm in 3. kg 45 mm 6.34 in.5 kg 2.9 kg olleri Type 2 olleri Type W3 22 (.87) (.55) 46 (.8) 32 (.26) kn/m max. 835 mm in 9. kg 45 mm 6.34 in 4.5 kg 8.7 kg olleri Type 3 Beyeler olleri Type W3 26 (.2) (.55) 64 (2.52) 32 (.26) kn/m max. W kn/m max. 835 mm in 2.6 kg (.79) 835 mm in 8. kg 45 mm 6.34 in 6.3 kg 45 mm 6.34 in 4. kg 85 mm olleri Type X ET olleri Type 2. kg (.55) 42 (.65) 32 (.26) 85 mm 7.7 kg olleri Type X Gasparini olleri Type W (.79) (.55) 62 (2.44) 32 (.26) kn/m max. W2 kn/m max. 835 mm in. kg 22 (.87) 835 mm in 7. kg 45 mm 6.34 in 5. kg 45 mm 6.34 in 3.5 kg 85 mm olleri Type 3 Beyeler F olleri Type 9.6 kg (.55) 46 (.8) 32 (.26) 85 mm olleri Type X Colgar olleri Type 6.7 kg W5 5.5 (.6) (.55) 8 (.7) 32 (.26) kn/m max. WC6 kn/m max. 835 mm in 4.6 kg 8 (.7) 835 mm in 5. kg 45 mm 6.34 in 2.3 kg 45 mm 6.34 in 2.5 kg 85 mm 4.4 kg olleri Type X jial- xial olleri Type (.55) (.79) 32 (.26) 85 mm olleri Type X Colly olleri Type 4.8 kg W- (.5) 3 (.55) (.) 5 22 (.87) 32 (.26) kn/m max. W-B kn/m max. 835 mm in 4.5 kg 8 (.7) 835 mm in 6.3 kg 45 mm 6.34 in 2.2 kg 45 mm 6.34 in 3. kg 85 mm olleri Type X LVD olleri Type 4.3 kg (.55) 32 (.26) 32 (.26) 85 mm olleri Type X LVD B olleri Type 6. kg WC (.6) 3.5 (.53) (.55) (.79) 32 (.26) kn/m max. 835 mm in 4.8 kg 45 mm 6.34 in 2.4 kg 4.6 kg olleri Type X Colly olleri Type WX E C B (.55) D 32 (.26) kn/m max. 835 mm in 3. kg 45 mm 6.34 in.5 kg 3. kg Individual olleri Type W-C 25 (.98) (.55) 37 (.46) 32 (.26) kn/m max. 835 mm in 9.7 kg 45 mm 6.34 in 4.8 kg 9.4 kg olleri Type X LVD C olleri Type W-D 35 (.38) (.55) 42 (.65) 32 (.26) kn/m max. 835 mm in.5 kg 45 mm 6.34 in 5.7 kg. kg olleri Type X LVD D olleri Type INT35 35 (.38) D 5 (.59) E C B (.55) kn/m max. INT35- kn/m max. 835 mm in 4. kg mm in 5. kg 525 mm.67 in 2.5 kg.5 45 mm 6.34 in 2.5 kg 85 mm 3.9 kg mm 4.8 kg Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 26 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 27

56 OLLEI DPTE Die dapter ails OLLEI DPTE Die dapters C / / C 25/ / C 3/ / C / TC / / TC 25/ / TC 3/ / TC / 27 (.6) 2 (.47) M8 35 (.38).5 (.8) M8 D6 3 (.8) 3. (.52).5 (.8) kn/m max. mm in 2. kg 5 mm 9.68 in 6. kg olleri Type olleri Type 2/3 D6 Example of pplication 97 (3.82) 3. (.52) Model Length Length Weight C / kg C 25/ kg C 3/ kg C / kg C 5/ Model Length Length Weight TC / 2 mm kg TC 25/ 26 mm kg TC 3/ 3 mm kg TC / 4 mm kg C 5/ D5 3. (.52).5 (.8) kn/m max. mm in 26. kg 5 mm 9.68 in 3. kg olleri Type olleri Type 2/3 D5 Example of pplication 3 (.8) (.39) 8 (3.5) M8 3 (.8) (.39) 8 (3.5) 2 (.8) M8 D7 kn/m max. 835 mm in 8. kg 45 mm 6.34 in 9. kg D7 Example of pplication Model Length Length Weight C 5/ kg C 5//C kg Model Length Length Weight C 5/ 5 mm kg C 5//C 5 mm kg C 5-9 (.57) (.79) 3 (.5) olleri Type 2/3 olleri Type (.38) 5 (.59) D (.49) (.47) 2 (.47) kn/m max. 835 mm in 28.5 kg 45 mm 6.34 in.2 kg olleri Type X ET 2,5 2 6 olleri Type D24 Example of pplication 9 (3.54) (4.72) 72 (2.83) 42 (.65) Model Length Length Weight C kg C 5-9/C kg 27 (.6) 55 (2.7) 5 (.59) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 28 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 29

57 OLLEI DPTE Die dapters OLLEI DPTE Die dapters D25 3. (.52) kn/m max. 5 mm 9.68 in 7.5 kg olleri Type X ET olleri Type 2/3 D25 Example of pplication D27 3. (.52) kn/m max. 5 mm 9.68 in 4.5 kg olleri Type X Weinbrenner olleri Type 2/3 D27 Example of pplication (.57) 2 (.83) (.57) 2 (.83) 55 (2.7) 35 (.38) D9-2.7 (.57) 9 (.75) 7 (.28) 2.7 (.5) kn/m max. 835 mm in 7. kg 45 mm 6.34 in 8.5 kg olleri Type X LVD olleri Type D9-2.7 Example of pplication D kn/m max. 835 mm in 8. kg 45 mm 6.34 in 9. kg Type merican olleri Type D7 Example of pplication D (.8) 48 (.89) 3. (.52).5 (.8) kn/m max. mm in 5. kg 5 mm 9.68 in 7.5 kg olleri Type X LVD olleri Type 2/3 D8-2.7 Example of pplication D kn/m max. 835 mm in 8. kg 45 mm 6.34 in 9. kg Type merican olleri Type D8 Example of pplication 7 (.28) 2.7 (.5) Modification: Wedge Bar / Tail D26 72 (2.83) 42 (.65) (.49) (.47) 37 (.46) 2 (.47) 35 (.38) 25 (.98) kn/m max. 835 mm in 23. kg 45 mm 6.34 in.4 kg olleri Type X Weinbrenner olleri Type D26 Example of pplication In order to use the dies olleri Type on other press brake machines, a mm (.39 in) groove is milled to insert a ground wedge bar / tail into the die. Wedge Bar / Tail (W x ) ystem 3 x 3 mm (.5 x.8 in) olleri Type 2 and 3 (Bystronic-Beyeler/afan/Trumpf etc.) 55 x 55 mm (2.7 x 2.7 in) olleri Type X ET 2.7 x 29 mm (.5 x. in) olleri Type X LVD 35 x 55 mm (.38 x 2.7 in) olleri Type X Weinbrenner pecific information and prizes are found in the olleri ervice / Modifications Chapter (see page 252) Mounting example W Die olleri Type Groove Wedge Bar / Tail Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 2 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 22

58 OLLEI MK FEE BENDING Prevention of Bending Marks 224 Bending Foil older/tensioner 224 Bending Foil 225 PU-older and PU-Upholstery ynthetic Dies

59 OLLEI MK FEE BENDING OLLEI MK FEE BENDING Prevention of Bending Marks One of the challenges of bending is to prevent the profile of having bending marks, such as; scratches and abrasions on the surface areas. Especially of Profile made of: tainless teel luminium painted metal panels It is often the case of a line building from the contact of the sheet metal with the die. This is the cause of friction of sheet metal on small radius. In order to prevent this markings, the following solutions are possible: Bending Foil PU-Upholstery Plastic Dies enlarged opening radius on special T-Dies.8 (.3) 4 (.6) Our dvantages Your Convenience Prevention of scratches and abrasions on bent sheet metals No post-processing necessary, therefore time and cost saving No contamination of bended pieces increases the product quality easy handling T-Dies (T) with an enlarged opening radius for the prevention of bending marks see pages 54-55, 6-6 Bending Foil Our dvantages Your Convenience easy handling can be used flexibly Prevention of Bending Marks decrease of post-processing of bent parts no contamination of the material increased product quality OLFILM Bending Foil: Practical, easy and economic! Model Thickness Thickness Width Width Length (m) Length olfilm olfilm olfilm olfilm olfilm olfilm olfilm olfilm Bending Foil - older / Tensioner CT tandard T-Die with small opening radius causes visible bending marks T-Die T with an enlarged opening radius reduces visibly the bending marks per piece 6. kg olfilm olfilm olfilm olfilm olfilm olfilm olfilm olfilm olfilm olfilm olfilm olfilm olleri Videos mark free bending: mark-free-bending Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 225

60 OLLEI MK FEE BENDING PU-olders and PU-Upholstery OLLEI MK FEE BENDING PU-olders and PU-Upholstery MPG25 MPG5 MPG75 Mounting example 25 (.98) 835 mm in 8.5 kg 45 mm 6.34 in 9.2 kg 5 (.97) 835 mm in 44. kg 45 mm 6.34 in 22. kg 77 (3.3) 835 mm in 46. kg 45 mm 6.34 in 22.5 kg 25 (.98) 5 (.97) 96 (3.78) GM 25x25 GM 5x5 GM 75x5 GMF 75x5x GMF 25x25x GMF 5x5x25 MPG 2 (4.2) (3.94) 96 (3.78) 46 (.8) (3.94) PU-Upholstery PU-older (.79) 25 (4.92) (.79) 2 (.8) B groove groove bar / tail lso mountable on other press brakes! 25 (.98) 835 mm in.6 kg 45 mm 6.34 in.3 kg 5 (.97) 835 mm in 2.5 kg 45 mm 6.34 in.2 kg 75 (2.95) 835 mm in 3.5 kg 45 mm 6.34 in.7 kg 75 (2.95) 25 (.98) 5 (.97) 5 (.97) 45 (.77) (.79) 5 (.97) 25 (.98) 5 (.97) ø (.39) 25 (.98) ø 25 (.98) 5 (.97) 46 (.8) PTCON GM x5 55 (6.) (3.94) 6 (.63) PU-Upholstery are suitable for radius- and U-profile bendings, etc. GMF x5x 835 mm in 3. kg (3.94) 45 mm 6.34 in 2.2 kg 5 (.97) (.79) 5 (.97) B 835 mm in 3.5 kg 45 mm 6.34 in.7 kg polyurethane polyurethane polyurethane polyurethane 835 mm in.6 kg 45 mm 6.34 in.3 kg 835 mm in 2.5 kg 45 mm 6.34 in.2 kg 835 mm in 55. kg 45 mm 6.34 in 27.5 kg polyurethane polyurethane cover plate Model Weight PTCON kg PTCON kg PTCON kg PTCON kg Mounting example 835 mm in 5. kg 45 mm 6.34 in 2.5 kg polyurethane polyurethane 5 (.59) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 227

61 OLLEI MK FEE BENDING OLLEI MK FEE BENDING ynthetic Dies Our dvantages Your Convenience easy andling faster and easier exchange of plastic dies prevention of bending marks decrease of post-processing of bent pieces no contamination of the materials increased product quality TN8. 75 (2.95) 8 (.7) 5 (.59) (.55) 24 (.94) IN... kn/m max. kn/m max. 835 mm in 5. kg 835 mm in.3 kg 45 mm 6.34 in 7.5 kg V 45 mm 6.34 in.5 kg olleri Type Mounting example ynthetic dies will be adjusted into the housing and secured with bolted screws. bolted screws 5 (.) (.79) α (.55) 24 (.94) Model α V V IN IN IN IN IN IN synthetic die housing Model α V V IN IN IN IN IN ynthetic Dies TN (3.) 8 (.7) 3 (.8) (.43) 9 (.75) 38 (.5) 3 (.8) 5 (.97) kn/m max. IN3... kn/m max. 835 mm in 25. kg 835 mm in.5 kg 45 mm 6.34 in 2.5 kg V 45 mm 6.34 in.25 kg olleri Type 2 (.47) 3 (.22) 9 (.75) α 3 (.8) 38 (.5) Model α V V IN IN IN IN IN IN IN IN IN IN IN IN IN s Please note that delivery time varies according to your location. Model α V V IN IN IN IN IN IN IN IN IN IN IN TN8. 75 (2.95) 8 (.7) 9 (.75) (.79) 35 (.38) IN... kn/m max. kn/m max. kn/m max. kn/m max. 835 mm in 9. kg 835 mm in. kg 835 mm in 2. kg 835 mm in. kg 45 mm 6.34 in 9.5 kg V 45 mm 6.34 in. kg (.79) 45 mm 6.34 in 6. kg V 45 mm 6.34 in. kg olleri Type 5 (.) 24 (.94) α (.79) 35 (.38) Model α V V IN IN IN IN IN IN IN IN IN IN Model α V V IN IN IN IN IN IN IN TMN (3.74) (.79) 9 (.75) 35 (.38) 3 (.5) olleri Type 2/3 IN... 5 (.) 24 (.94) α (.79) 35 (.38) Model α V V IN IN IN IN IN IN IN IN IN IN Model α V V IN IN IN IN IN IN IN Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 229

62 OLLEI PECIL ND EVY DUTY TOOL Explanation of pecial Tools 232 Explanation of eavy Duty Tools 233 eavy Duty Tools Examples of pecial Tools Dies with ollers OL6-ystem 242 Panelling Tools 242 BLCKFIE 243 2

63 OLLEI PECIL ND EVY DUTY TOOL pecial olutions Our dvantages Your Convenience in-house construction and production (no reseller or dealer) competent consulting client specific developments tracking of every tool possible, with a unique serial number on every article after the quality control check precision grinding (tolerance of +/-.mm) guaranteed tool reproduction exact parallelism bending tests upon request pecial Tooling for: Z-Profiles at-profiles Trapezoidal Profiles Pressed contours Foldings inges adii Beads pecial Profiles etc. OLLEI PECIL ND EVY DUTY TOOL olutions for heavy tasks Our dvantages Your Convenience The bending of materials with extreme high resistance, (ardox, Weldox, etc.), has developed into an important task. The eavy Duty tools of olleri are built and finished for these challenges. Tools that have a press force up to kn/m, offer you many production possibility. Material The raw material is obtained from qualified suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength. Material Type Mechanical resistance of the material ardness of the operating surfaces ardness of the material and the tool body and the tool body after induction hardening 42CrMo4 9-5 N/mm C 54-6 C C N/mm C 54-6 C N/mm C 54-6 C pecifications for the maximum press force kn/m are indicated as such, t = kn. Our many years of experience in the area of special and heavy duty tooling, along with our own developing department, guarantee you functional and economic solutions in the bending sector. From the compatible tang to the punch onto the compatible die; we manufacture everything in our own production facilities. Take advantage of the direct contact to the manufacturer and the benefits which come along with it. Contact us now! We are here to help you! 2 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 233

64 OLLEI PECIL ND EVY DUTY TOOL eavy Duty Tools OLLEI PECIL ND EVY DUTY TOOL eavy Duty Tools D.3 (.39) (.57) (.57) (.57) 5 (.97) D.3 YD D.3-25 D.3-25 YD 5 (.97) 5 mm 9.68 in 22. kg 45 (.77) 5 mm 9.68 in. kg 8 (.3) 5 (.97) D.5-25 kn/m max. 25 kn/m max. 42Cr: 9-5 N/mm2 42Cr: 9-5 N/mm 2 3 (.8) 42Cr: 9-5 N/mm 2 D.3-5 mm 9.68 in 22. kg D.3- YD 5 mm 9.68 in. kg kn/m max. kn/m max..2767: 83 N/mm : 83 N/mm 2 5 (.97) (.57) (.39) kn/m max. (4.72) 3 (.8) (4.72) 3 (.8) 5 (9.68) 5 (.97) More Tools for eavy Duty operations can be found on pages mm 9.68 in 253. kg DP.6 44 (.73) 25 (.98) 22 (.87) W 6 9 (.35) 25 kn/m max. Model W W DP DP DP DP DP DP DP DP DP DP mm 9.68 in kn/m max. Model W W DP DP DP DP DP DP DP DP DP DP Cr: 9-5 N/mm : 83 N/mm 2 (4.72) 2 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 235

65 OLLEI PECIL ND EVY DUTY TOOL OLLEI PECIL ND EVY DUTY TOOL Tool examples PE PE2 PE9 PE-P at-profiles Z-Profiles C B B PE3 PE4 C D B C D B PE-P2 PE-P3 α Trapezoidal Profiles PE5 inges PE6 α α ø ø PE-P4 Front- and emming Tool (Foldings) PE7 PE-X 2 (8.66) 3 (.8) 2 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 237

66 OLLEI PECIL ND EVY DUTY TOOL Tool examples OLLEI PECIL ND EVY DUTY TOOL Dies with ollers adii Pressing M9 M3 V C V ollen: C C ollen: C C 42Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm 2 C (3.54) B 3 (5.2) B pecial Profiles Model V V B B C C Length Length Weight (kg) M M M M M M M Model V V B B C C Length Length Weight (kg) M M M M M M M M M M M (.79) 3 (.5) (.79) 3 7 (.27) 2.7 (.5) 9 (.75) 2 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 239

67 OLLEI PECIL ND EVY DUTY TOOL OLLEI PECIL ND EVY DUTY TOOL Dies with ollers Dies with ollers Our dvantages Your Convenience increase in wear resistence through rollers induction hardened rollers (approx. 6 c) decrease in bending marks decrease in press force easy and economic exchange of rollers D M (.4) (.79) 3 (.5) 98 mm 3.86 in dapter for olleri Type M (3.78) 25 (9.84) kn/m max. mm 3.94 in 28. kg 42Cr: 9-5 N/mm 2 D M3 27 (.6) 3 (.5) 98 mm 3.86 in dapter for olleri Type 2/3 D M (.9) 42 (.65) 3 (.5) 98 mm 3.86 in dapter for olleri Type X ET (7.87) 55 (2.7) 8 (7.87) M7..8 kn/m max. M kn/m max. 29 (.4) (7.87) 4 (6.54) 3 (2.6) 25 (9.84) 8 8 (3.5) 2 3 (.8) 7 (6.69) 6 (2.362) D M (2.3) 45 (.77) 3 (.5) 98 mm 3.86 in dapter for olleri Type X Weinbrenner D M (.6) (.79) 3 (.5) 7 (.28) 2.7 (.5) 98 mm 3.86 in dapter for olleri Type X LVD 3 (.8) 3 (.5) 35 (.38) mm 3.94 in 9. kg mm 3.94 in 42. kg 42Cr: 9-5 N/mm 2 42Cr: 9-5 N/mm 2 8 (.575) 25 (.98) 3 (.5) 5 (5.9) Take advantage of our dies with rollers with means of groove bars/tails to use on other press brake machines. 3 (.5) 2 (9.45) Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 2 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 24

68 OLLEI PECIL ND EVY DUTY TOOL OL6-ystem OLLEI PECIL ND EVY DUTY TOOL BLCKFIE Our dvantages Your Convenience OL6 The Unique Coating Our dvantages Your Convenience various V-Openings: -36 mm ( in) Instructions: - secured manually with steering wheel - driven by gear motor or - CNC-system While using the manual version, the opening is set in place by a turn of the stearing wheel, or with a gear reduction which is attached to the die. The automatic version, on the other hand, is operated by a control panel. The standard system does not come with the CNC-Connection for the press brake. It is available upon request at an additional cost. The base of the OL6-system is 7 mm (28.35 in) wide, but can also be fitted onto narrow designed tables. There is a adapter available in order to secure the system onto a table with a width of mm (5.75 in). The inserts in the opening radius are exchangeable. The standard version comes with an opening radius of = mm (.39 in). 42Cr: 9-5 N/mm 2 bending angle kn/m max olleri BLCKFIE is a particular coating of your tools which defines itself by its increased corrosion resistence and special design. The chemical treatment permanently solves the problem of oxidation. The top surface of the metals changes through the phosphate process. It builds phosphate-like crystals, that attach themselves chemically on the substance. This improves the durability of the surface against corrosion. Your equipment will have a long-term lifecycle left unchanged. The glossy black color of BLCKFIE is compatible with the new technology and that allows a unique and esthetic look which connects well with the advantages of it. You can have the BLCKFIE treatment on all standard tools with a surcharge of 3%. Please note that the delivery times vary by a BLCKFIE Treatment. no corrosion better gliding by the exchange of tools appealing design long-life cycle Die weight: approx. ton/m olleri Videos pplication of various dies OL6: Panelling Tools Our dvantages Your Convenience in-house construction (no reseller or dealer) production according to your specifications tracking of every tool possible, with a unique serial number on every article after the quality control check. precision grinding (tolerance of +/-. mm) exact parallelism use of the best materials, guaranteed high resistance and tensile strength 2 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 243

69 OLLEI EVICE / MODIFICTION Our Production Department Modified Tangs pecial ectioning 25 orn Pieces 25 Modifying the V-Opening 25 adius and ngle Modification 25 Grooves for Dies 25 Grooves and Groove Bars/Tails for Dies 252 Gaps and Windows 253 3

70 OLLEI EVICE Our Production Department Our Machine Park Our comprehensive machinery with state-of-the-art technology ensures you the highest quality in tools. In addition to the manufactured standard and special tools, we perform all modifications individually according to your requirements. Take advantage the modifications to reduce costs and increase the productivity of your existing tools! OLLEI EVICE Our Production Department ardening The surface areas of the tools are exposed to the highest mechanical stress. Due to the fact that, the whole press force of the press brake machine is focused on small surface of the sheet metal. Therefore the stress is very high on these surfaces. During the bending process of the sheet metal, friction occurs. For more resistance strength the hardening of the surfaces can be increased. The depth of the hardening must be at least 3 mm to avoid deformations. We use the electromagnetic technique also known as induction hardening to the best quality for your money s worth. CNC-Milling With our state-of-the-art milling centers we can do your modification requests fast, precise and with high-quality. wivel milling heads with high swivel range allows flexible and universal production. This is where, grooves, gaps, and openings are created. Quality Control and Laser Marking fter the laser marking, tracking of every tool is possible with a unique serial number on every article. Therefore the tracking of your tools is guaranteed and a new productions with the exact same meausrements (angle, radius, hardening, etc.) is possible. This step is happens after quality control. Individual markings are upon request possible. CNC-Profile Grinding Our CNC-Professional grinding machines guarantee, highest precision ground (tolerance of +/-. mm), accurate parallelism and repeatability. ere you can also retrofit induction hardened and core hardened tool pieces. adius and angle modifications are percisely grounded after your measurements. EDM Wire By using EDM wire, hardened and very tough material can be retrofitted. The process is operated based on a CD-system which can also process high dimensions such as special shapes. 3 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 247

71 OLLEI MODIFICTION OLLEI MODIFICTION for standard tangs Modified Tangs olleri Punches Type, 2, and 3 can be used on other press brake machines by modifying the tang. Precision ground (Tolerance of +/-. mm) exact parallelism fast, economic, percise tandard olleri Type (.5) 3 7 (.28) (.) (.5) 8.4 (.33) 3 (.8) Fast delivery on these items guaranteed. Please note that delivery terms vary according to your location. for standard tangs tandard olleri Type 2 (.) (.33) (.79) OT Modification for: for mada fast clamping system (.5) 3 7 (.28) 9 chamfer 3 (.5) 8.4 (.33) 3 (.8) 835 mm in 45 mm 6.34 in Groove in addition to 8.4 x 3.5 mm (.33 x. in) groove for: pneumatic clamping system (.5) 3 7 (.28) (.) (.) 3 (.5) 8.4 (.33) (.39) 3 3 (.8) 22 (.87) 835 mm in 45 mm 6.34 in Modification examples Type 2 production according to your specifications (.3) 8 6 (.24) (.79) 4 (.6) production according to your specifications (.47) 2 5 (.) 5 (.59) 3 (.2) 2 (.47) 6 Groove in addition to 8.4 x 3.5 mm (.33 x. in) groove for: olleri Type 3 Bystronic-Beyeler Euro afan (.5) 3 7 (.28) (.) (.6) 3 (.5) 8.4 (.33) (.55) 3 (.8) (.24) mm in 45 mm 6.34 in 7 Groove in addition to 8.4 x 3.5 mm (.33 x. in) groove and shortened tang for: olleri Type 3 Bystronic-Beyeler Euro afan (.5) 3 7 (.28) (.) (.6) 3 (.5) 8.4 (.33) (.55) (.24) 6 3 (.8) 25 (.98) 835 mm in 45 mm 6.34 in Take advantage of your existing tools with means of modifications. tandard olleri Type 3 8 Groove Bar/Tail for: hydraulic clamping system Gasparini (.5) 3 7 (.28) (.6) 4 45 (.) 5 5 (.59) (.39) 3 (.8) 835 mm in 45 mm 6.34 in 4 older clamping system (.5) 3 7 (.28) 4 (.6) (.24) 6 (.55) 3 (.8) 835 mm in 45 mm 6.34 in 45 (.77) (.55) (.55) (.79) (.43) 42 older clamping system (.5) 3 7 (.28) (.6) 4 (.55) (.24) 6 3 (.8) 25 (.98) 835 mm in 45 mm 6.34 in 43 Groove with steel bar for: punches.5 (.57) (.5) 3 7 (.28) (.8) 4.5 (.39) 3 (.8) 835 mm in 45 mm 6.34 in Modification examples Type 3 production according to your specifications 4 (.6) (.39) (.55) (.79) (.43) production according to your specifications 45 (.77) 9 (.35) 9 (.75) (.79) (.43) 3 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 249

72 5 (.) 5 (.) 35 (5.3) 245 (9.65) 835 (32.87) 445 (7.52) 23 (9.6) 5 (.) 835 (32.87) 6 (23.62) B α B α OLLEI MODIFICTION OLLEI MODIFICTION pecial ectioning adius and ngle Modifications Individual sectioning of your punches and dies fast, economic, percise Pro separation cutting causes a decrease in length of approx. 5 mm Individual modifications of your punches and dies fast, economic, percise pecial ectioning of Punches pecial ectioning of Dies adius Modifications for Punches adius Modifications for Dies Example of punches production according to your specifications Example of Dies production according to your specifications adii modification Punch example production according to your specifications Opening adius modification die example production according to your specifications.2 (.47) 3. (.8) before before 6 (.39) before 6 3 (.8) after before after orn Pieces individual horn pieces on punches and dies on one or both sides fast, economic, percise orn Pieces for Punches orn Pieces for Dies ngle Modification Punches ngle modification punch example production according to your specifications ngle Modification Dies ngle modification die example production according to your specifications.2 (.47) 8 3. (.8) Punch example production according to your specifications Die example production according to your specifications 6 (.39) before 55 (.39) after before after B Grooves for Dies Milling of grooves for use on other press brake systems fast, economic, percise Mounting example Modifying the V-Opening individual modification for dies fast, economic, percise Delivery within 3 business days. Upon concorrdance even faster! Die olleri Type milled groove Die holder Modifying the V-Opening Example production according to your specifications (.39) (.43).2.2 (.47) (.47) Give us a call for more information! 28 Groove for die holder 835 mm in 45 mm 6.34 in 29 groove production according to your specifications 835 mm in 45 mm 6.34 in 6 (.24) 5 (.59) B 3 Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 25 delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 25

73 OLLEI MODIFICTION OLLEI MODIFICTION Grooves und Groove Bars/Tails for Dies Gaps and Windows For milling of the groove and the insert of a ground groove bar/tail the exact measurement is needed to use on other press brake systems fast, economic, percise Mounting example Die olleri Type The retrofitting of the tool edges of long parts, short U-profiles and similar fast, economic, percise Milled groove Groove Bar/Tail B 3 Groove Bars/Tails: 3 x 3 mm (.5 x.8 in) for olleri Type 2 olleri Type mm in 45 mm 6.34 in 3 Groove Bars/Tails: 2 x 29 mm (.47 x. in) for olleri Type X LVD 835 mm in 45 mm 6.34 in Gaps on Punches Example Punches production according to your specifications Gaps on Dies Example Dies production according to your specifications (.79) (.39) 3 (.5) 9 (.75) (.77) (.39) 55 (2.7) 45 X (.39) (.39) 7 (.28) 2 (.47) 32 Groove Bars/Tails: 2.7 x 29 mm (.5 x. in) for olleri Type X LVD 835 mm in 45 mm 6.34 in Groove Bars/Tails: 55 x 55 mm (2.7 x 2.7 in) for olleri Type X ET 835 mm in 45 mm 6.34 in Windows for Punches Example Punches production according to your specifications (.39) 9 (.75) 7 (.28) 2.7 (.5) Groove Bars/Tails: 35 x 55 mm (.38 x 2.7 in) for olleri Type X Weinbrenner 835 mm in 45 mm 6.34 in individual Groove Bars/Tails for other systems 835 mm in 45 mm 6.34 in 45 (.77) 35 (.38) B For olleri BLCKFIE see page Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 253

74 OLLEI E BLDE ND CCEOIE Tooling Cabinets Tool Trolley 258 Bending Box 258 quaring rms 259 upporting rms 26 Back Gauge 26 hear Blades 26-26

75 OLLEI CCEOIE OLLEI CCEOIE Tooling Cabinets Tool Cabinets Our dvantages Your Convenience Protection against contamination and damage Faster access obust construction Clear and tidy storage Cabinet doors specially designed for lift trucks and truck djustable height, zinc-plated shelves olleri Videos Tool storage demonstration at: videos/tooling-cabinets M 6-4-T / -CV for max. tool length = 6 mm (4.73 in) 85 x 2 x 36 (W x x D) x x (W x x D) for tools olleri Type 2/3 approx..8 m / 3.2 m (88.89 in / in) torage capacity M 6-5-T / -CV for max. tool length = 6 mm (4.73 in) x 2 x 36 (W x x D).94 x x (W x x D) for tools olleri Type 2/3 approx. 26 m / 4.6 m (23.62 in / in) torage capacity M for max. tool length = 835 mm (32.87 in) 85 x 2 x 5 (W x x D) x x 4.34 (W x x D) M for max. tool length = 835 mm (32.87 in) x 2 x 5 (W x x D).94 x x 4.34 (W x x D) for Tools olleri Type approx. m (787. in) torage capacity for Tools olleri Type approx. 25 m ( in) torage capacity Equipment M 6-4-T 4 Drawers vertical, on wheels (see C-2) 8 helves for type 2/3 with 3 mm (.5 in) tangs (see shelves UL-3-4) 8 helves for type 2/3 (see shelves UT-4) Weight 383. kg Equipment M 6-5-T 5 Drawers vertical, on wheels (see C-2) helves for type 2/3 with 3 mm (.5 in) tangs (see shelves UL-3-4) helves for type 2/3 (see shelves UT-4) Weight 447. kg Equipment 4 Drawers vertical, on wheels (see C-) 6 helves for type with 3 mm (.5 in) tangs (see shelves UC-3-) 4 helves for type with 3 mm (.5 in) tangs (see shelves UL-3-3) Weight 27. kg M 6-4 / -CV for max. tool length = 6 mm (4.73 in) 85 x 2 x 36 (W x x D) x x (W x x D) for Tools olleri Type 2/3 approx. 26 m / 39 m (23.62 in / in) torage capacity Equipment 5 Drawers vertical, on wheels (see C-) helves for type with 3 mm (.5 in) tangs (see shelves UC-3-) 5 helves for type with 3 mm (.5 in) tangs (see shelves UL-3-3) Weight 35. kg M 6-5 / -CV for max. tool length = 6 mm (4.73 in) x 2 x 36 (W x x D).94 x x (W x x D) for Tools olleri Type 2/3 approx m / 52 m ( in / in) torage capacity Equipment M 6-4-T-CV 4 Drawers vertical, on wheels (see C-2), incl. 2 Drawers with separators (see CV) 6 helves for type 2/3 with 3 mm (.5 in) tangs (see shelves UC-3-) 8 helves for type 2/3 (see shelves UT-4) Weight 36. kg UC-helves UT-helves B L Model L mm mm B mm Weight UC-3-25 (4.92) 3 (.5) 76 (2.99).5 kg UC (9.84) 3 (.5) 232 (9.3). kg UC-- 25 (4.92) (.79) 76 (2.99).5 kg UC (9.84) (.79) 232 (9.3). kg 2 pieces Model L L Weight UT kg UT kg UT kg UT kg Equipment M 6-5-T-CV 5 Drawers vertical, on wheels (see C-2), incl. 3 Drawers with separators (see CV) 24 helves for type 2/3 with 3 mm (.5 in) tangs (see shelves UC-3-) 8 helves for type 2/3 (see shelves UT-4) Weight 5. kg UL-helves UV-helves B L L Model L mm B mm Weight UL-3-27 (.63) 3 (.5).2 kg UL (22.83) 3 (.5) 2.5 kg UL (4.34) 3 (.5) 4.6 kg UL (53.54) 3 (.5) 6. kg UL-- 27 (.63) (.79).4 kg UL (22.83) (.79) 3.2 kg UL--3 5 (4.34) (.79) 5.8 kg UL (53.54) (.79) 7.5 kg Model L L Weight UV kg UV kg UV kg UV kg enough room for punches with safety pins Equipment M Drawers vertical, on wheels (see C-2) 6 helves for type 2/3 with mm (.79 in) tangs (see shelves UC--2) 4 helves for type 2/3 with mm (.79 in) tangs (see shelves UL--4) Weight 3. kg Equipment M Drawers vertical, on wheels (see C-2) helves for type 2/3 with mm (.79 in) tangs (see shelves UC--2) 5 helves for type 2/3 with mm (.79 in) tangs (see shelves UL--4) Weight. kg C-Drawers Model T mm L mm Weight C- 5 (4.34) 856 (33.7) 22. kg C-2 36 (53.54) 66 (45.9) 25. kg CV-Dividers B Model T mm mm B mm Weight CV- 5 (4.34) 58 (22.83) 27 (.63) 7. kg CV-2 36 (53.54) 58 (22.83) 58 (22.83) 7. kg Equipment M 6-4-CV 4 Drawers vertical, on wheels (see C-2), incl. 2 Drawers with separators (see CV) helves for type 2/3 with mm (.79 in) tangs (see shelves UC--) helves for type 2/3 with mm (.79 in) tangs (see shelves UL--4) Weight 35. kg Equipment M 6-5-CV 5 Drawers vertical, on wheels (see C-2), incl. 3 Drawers with separators (see CV) 3 helves for type 2/3 with mm (.79 in) tangs (see shelves UC--) helves for type 2/3 with mm (.79 in) tangs (see shelves UL--4) Weight 49. kg L T T Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 257

76 OLLEI CCEOIE Tool Trolley Our dvantages Your Convenience faster access robust construction clear and tidy storage visibility of tools OLLEI CCEOIE quaring rms Our dvantages Your Convenience easy and fast securing percise and flexible adjustability adjustable angle stop mountable on all dies ideal for long, and thin sheet metals olleri Videos Magnetic quaring rms : videos/squaring-arms =5 (59.84) Tool Trolleys Model Content Tool ystem Weight Trolley 3 helves for tools 8. kg T Trolley 2 helves for 2 tools 75. kg B Trolley 2 helves for 3 tools 35. kg M magnetic M.D (right) per piece.4 kg M. (left) per piece.4 kg olleri Videos ecure storage and mobility: videos/tool-trolley D=6 (45.67) W=6 (4.73) Bending Box Bending Box per piece.6 kg per piece 3.5 kg Give us a call for more information! Please ask for kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! mm = 3.94 Inch =.33 Feet (ft) delivery time depends on your location. 259

77 OLLEI CCEOIE upporting rms and Back Gauge OLLEI E BLDE hear Blades IF-upporting rm P-Back Gauge Our dvantages Your Convenience Model Length mm Weight IF5 5 (9.68) 7. kg IF (39.37) 2. kg Model P5 P5B Weight 8. kg 8. kg own production custom production IF5 5 (59.5) 7. kg depending on the cutting material high quality Materials 4-, 2- or -sharp with threaded holes or bilateral reduction hardened according to your specifications and request for secure support for high volume sheet metals greater surface guarantees a trouble-free support for sheet metals easy handling ensures for the correct posistioning of tools on the press brake and secures herewith the exact border distance. fast and exact repeatability easy handling available sizes mm 5 x (.97 x.39) 55 x 2 (2.7 x.47) 6 x 2 (2.36 x.47) 65 x 3 (2.56 x.5) 7 x 3 (2.76 x.5) 5 x (.97 x.43) 55 x 3 (2.7 x.5) 6 x 3 (2.36 x.5) 65 x (2.56 x.55) 7 x (2.76 x.55) 5 x 2 (.97 x.47) 55 x (2.7 x.55) 6 x (2.36 x.55) 65 x 5 (2.56 x.59) 7 x 5 (2.76 x.59) 5 x 3 (.97 x.5) 55 x 5 (2.7 x.59) 6 x 5 (2.36 x.59) 65 x 6 (2.56 x.63) 7 x 6 (2.76 x.63) 5 x (.97 x.55) 55 x 6 (2.7 x.63) 6 x 6 (2.36 x.63) 65 x 7 (2.56 x.67) 7 x 7 (2.76 x.67) 5 x 5 (.97 x.59) 55 x 7 (2.7 x.67) 6 x 7 (2.36 x.67) 65 x 8 (2.56 x.7) 7 x 8 (2.76 x.7) 55 x 8 (2.7 x.7) 6 x 8 (2.36 x.7) 65 x 9 (2.56 x.75) 7 x 9 (2.76 x.75) FIX per piece 3. kg 55 x 9 (2.7 x.75) 6 x 9 (2.36 x.75) 65 x (2.56 x.79) 7 x (2.76 x.79) 55 x (2.7 x.79) 6 x (2.36 x.79) available sizes mm 75 x 5 (2.95 x.59) 8 x 6 (3.5 x.63) 85 x 8 (3.35 x.7) 9 x (3.54 x.79) x (3.94 x.79) 75 x 6 (2.95 x.63) 8 x 8 (3.5 x.7) 85 x 9 (3.35 x.75) 9 x 2 (3.54 x.83) x 22 (3.94 x.87) 75 x 7 (2.95 x.67) 8 x 9 (3.5 x.75) 85 x (3.35 x.79) 9 x 22 (3.54 x.87) x 25 (3.94 x.98) 75 x 8 (2.95 x.7) 8 x (3.5 x.79) 85 x 2 (3.35 x.83) 9 x 23 (3.54 x.9) x 26 (3.94 x.2) 75 x 9 (2.95 x.75) 8 x 2 (3.5 x.83) 85 x 22 (3.35 x.87) 9 x 24 (3.54 x.94) x 27 (3.94 x.6) 75 x (2.95 x.79) 8 x 22 (3.5 x.87) 85 x 23 (3.35 x.9) 9 x 25 (3.54 x.98) x 28 (3.94 x.) 75 x 2 (2.95 x.83) 8 x 23 (3.5 x.9) 85 x 24 (3.35 x.94) x 29 (3.94 x.) 75 x 22 (2.95 x.87) 8 x 24 (3.5 x.94) 85 x 25 (3.35 x.98) x 3 (3.94 x.8) 75 x 23 (2.95 x.9) 8 x 25 (3.5 x.98) 75 x 24 (2.95 x.94) hear Blades 75 x 25 (2.95 x.98) We manufacture in our company over more than years shear blades. igh-quality steels are finished according to your specifications. Please provide us with the following information: What material are you cutting with your machines: teel, tainless teel, luminium, etc. ow thick is the material in diameter? ow often to you use your cutting machine? (per hour, day, week) ow many upper and lower shear blades are needed? α α α α New production and retrofitting service: fast, economic, precise! α 4-sharp 2-sharp -sharp α 26 Please ask for delivery time! kg = 2. Pounds (lb) = Ounzes (oz) mm = 3.94 Inch =.33 Feet (ft) s Please note that delivery time depends on your location. 26

78 OLLEI Professional Bending Press Force Table The press force table is based on the press force caliper and is very useful to those who deal with sheet metal profiles. It can assist you from the projection of profiles, to technical construction, to the buying of tools, and to the finished profile from the press brake machine. In the first left column the thickness of the sheet metal is noted as (). In the three first lines you can find the die width (V), the minimum boarder (B), and the ideal inner profile radius (i). By crossing the thickness with the die width, you will find the necessary press force per meter. Furthermore, depicted are the span of 5 different die widths. The correction factors are found below in the table. = Thickness V = Die Width B = Min. Boarder i = Inner Profile adius B 9 i V Visit us on our website and take advantage of: drawings : format available extra information and tips helpful videos and application examples easy website browsing 4 N/mm V B,5,7,8,,3,5 2, 2,5 3,2 4,4 5, 6,5 8,, 2, 5,, 25, 37, i INOX stainless steel 7 N/mm 2 Ton x L aluminium N/mm 2 Ton x ( = tensile strength) F kn/m Copyright: The use of olleri Publications and national adoptions of olleri Publications is subject to the user s acceptance of olleri s terms of use and conditions of copyright for olleri publications, as set out below. ll olleri Publications and national adoptions thereof are protected by copyright. Therefore and unless otherwise specified, no part of an olleri Publication or a national adoption thereof may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, microfilm, and scanning, without permission in writing from the publisher. 3 B x.6 = N/mm 2 r x.8 l 6 B x. 9 B x. =4 N/mm 2 r x. Fe B x.9 5 B x.7 =7 N/mm 2 r x.4 INOX

79 olleri.p.. Via rtigiani Cabina 29 Vigolzone (PC) Italia Tel Fax sales@rolleri.it Web