PRESS BRAKE TOOLS FAST CLAMPING SYSTEMS, ADAPTERS, SERVICE/MODIFICATION, SHEAR BLADES, ACCESSORIES

Transcription

1 PRESS BRAKE TOOLS FAST CLAMPING SYSTEMS, ADAPTERS, SERVICE/MODIFICATION, SHEAR BLADES, ACCESSORIES

2 ROLLERI WELCOME to the new Rolleri catalogue! Rolleri is one of the few real manufacturers of press brake tools not a reseller and not a dealer. Therefore we emphasize great importance as being producer of press brake tools to bring you further advantages. no margin division direct access to the production direct communication, not only by specific and special bending tools. THE PRODUCTION All production phases are certified and up to quality check standards and safety regulations. Thereby we guarantee you consistent high quality with modern CNCmachines. All tools are laser marked with a serial number. Thus, allowing every single tool to be identified and easily tracked for reproduction. This is what we call accurate repitition. Competent and truthful statement about prices and delivery times without tedious queries! Convince yourself of our service and quality of tools! THE COMPANY Since 1987 we have been producing standard and special tooling. The family owned company (Francesco and Marco Rolleri) can nowadays be considered one of the largest press brake tooling manufacturers in Europe. We are internationally available with our branches Rolleri Brasil, Rolleri USA, Rolleri India, Rolleri Deutschland GmbH, Rolleri China, Rolleri Ukraine and Rolleri Benelux, for you to utilize our global experiance and footprints. We offer fast and reliable service through our partners in all of Europe. In 12, we have completely restructured our facilities internally. The focus of direct sales structures in the individual countries has greatly improved. We present to you, a new expanded portfolio, a significantly enlarged stock, new corporate design, and a completely new catalog that you now hold in your hands. Our promise to an alternative for you Worlwide. THE WAREHOUSE We at Rolleri, have a wide stock ranging over more than, press brake tools. Therefore, we hold one of the largest in house stocks in all of Europe. For you this means a vast amount of tools to choose from ready to be shipped all around the world. Look for this symbol in the catalogue! THE TEAM The Rolleri team is made up of all ages. We are innovative, dynamic and experienced, with consistency and harmony. Our mission is to bring you the best results in tool production. At Rolleri teamwork is the key to achieve outstanding customer service, research and development, great warehouse efficiency, and vast productivty. The exceptional atmosphere in our facilities always has a positive impact on our products. Rolleri Videos Company Presentation company-rolleri THE SERVICE We understand that finding the right tool for the right application is of your importance. Thus, we have invested hard work into our quality service: Consulting, Technical assistance, Training for your bending specialists, this is our daily business bringing you great support! Check out our website: also this is customer service: Rolleri provides you with immediate production after a purchase has been made to ensure the fastest delivery time! 2 3

3 ROLLERI Professional Bending THE CONSTRUCTION Besides constructing many special tools, our research and development team also innovates special clamping systems which increases your productivity. Technicians and Engineers develop for you solutions which are economic and practical. THE RAW MATERIAL The raw material is obtained from qualified suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength. We work with highly complex 3D simulation models and are capable to create bending examples of various profiles. Inquire with us today! THE QUALITY Rolleri ISO 91:8 certified. To be your choice supplier means much more to us; together we can find the best and most economic tool and develop a vast number of bending solutions. We also offer training for your employees in the bending department. These are qualities, where we are glad to assist you along with our extravagant number of bending products. THE PRESS BRAKE TOOLS Rolleri manufactures all tools in their own production facilities. We put great importance into our precision grinding, guaranteeing accurate reproduction of tools, exact concurrency. We induction harden all tools at 54-6 HRc to get the best results for your punches and dies. Each tool is subjected to quality control and then provided with a serial nummer to simplify and guarantee tracking. THE QUALITY CONTROL An extra quatlity control department reviews and tests every single tool after a complete production cycle. Every tool is given a serial number and batch number, after being carefully examed. This process guarantees a 1% retracing possibility of the tool. Of course Rolleri also guarantees accurate reproduction, high-quality material, induction hardening, and precision grinding. QuickLock INNOVATIONS Rolleri produces for many press brake manufacturers the clamping systems - whether they are hydraulic, pneumatic, or manual. Our new QuickLock-System, compatible for our Rolleri Type R2 or our new ROL 1 for Rolleri Type R1, are all new developments from Rolleri which are manufactured in our production facilities. ROL

4 PUNCHES ROLLERI TYPE R1 DIES ROLLERI TYPE R1 PUNCHES ROLLERI TYPE R2 DIES ROLLERI TYPE R2 PUNCHES ROLLERI TYPE R3 Compatibility Tools Rolleri Type R1 are compatible with press brake machines from: ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Safan, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc. Tools Rolleri Type R2 are compatible with press brake machines from: Hämmerle-Bystronic, LVD, Trumpf or on press brakes with System NSCL (New Standard Clamping) Tools Rolleri Type R3 are compatible with press brake machines from: - Bystronic-Beyeler RFA - Bystronic-Beyeler RF - Bystronic-Beyeler R - Bystronic-Beyeler S Tools Rolleri Type are compatible with press brake machines from: EHT, Weinbrenner, American, Gasparini, Ajial-Axial, Colgar, LVD, Colly, Hämmerle-Bystronic, etc. With Adapter-Systems the tools Rolleri Type R1- are also applicable on all other press brake machines. DIES ROLLERI TYPE R3 TOOLS ROLLERI TYPE ROLLERI DIES ROLLA-V ROLLERI CLAMPING SYSTEMS ROLLERI ADAPTERS ROLLERI MARK FREE BENDING ROLLERI SPECIAL AND HEAVY DUTY TOOLS ROLLERI SERVICE / MODIFICATIONS ROLLERI SHEAR BLADES / ACCESSORIES

5 TOOLS ROLLERI TYPE Content Explanation 15 EHT: Explanation 151 Weinbrenner: Explanation 151 American: Explanation 152 American: Punches and Dies Gasparini: Explanation 156 Gasparini: Radius Tools and Punches Ajial-Axial: Explanation 159 Ajial-Axial: Punches and Adapters 159 Colgar: Explanation 16 Colgar: Punches and Radius Tools 16 LVD: Explanation 161 LVD: Punches 162 LVD: Hemming Tools 163 LVD: Dies LVD: Dies LVD: Multi-V-Dies 167 LVD: Adapters 168 Colly: Explanation 169 Colly: Punches Colly: Dies Hämmerle-Bystronic: Explanation 174 Hämmerle-Bystronic: Punches Hämmerle-Bystronic: Punch Holders Hämmerle-Bystronic: Radius Tools 182 Hämmerle-Bystronic: Die Holders 183 Hämmerle-Bystronic: Dies Compatibility Tools Rolleri Type are compatible with press brake machines from: EHT, Weinbrenner, American, Gasparini, Ajial-Axial, Colgar, LVD, Colly, Hämmerle-Bystronic, etc. With Adapter-Systems the tools Rolleri Type are also applicable on all other press brake machines.

6 ROLLERI TYPE Explanation of Tools Compatibility Our Advantages Your Convenience Tools Rolleri Type are: compatible with press brake machines from: EHT, Weinbrenner, American, Gasparini, Ajial-Axial, Colgar, LVD, Colly, Hämmerle-Bystronic, etc. with Adapter-Systems (see pages ) also applicable on all other press brake machines. own production facilities (no reseller or dealer) tracking of every tool possible, with a unique serial number on every article after the quality control check. precision grinding (tolerance of +/-.1 mm) guaranteed tool reproduction exact parallelism precise, consistent working height tang retrofitting and modification possible (see pages ) very large stock availability EHT 64 (2.52) 8 (.31) 21 (.83) ROLLERI TYPE Explanation We produce for you the Tools Rolleri Type EHT in a vast variety custom, fast, economic and with precision. 26 (1.2) 18 (.71) 4 (.16) Adapters for Rolleri Type EHT see pages Material The raw material is obtained from qualified suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength. H press force line inner radius 54-6 HRC press force line Material Type Mechanical resistance of the material Hardness of the operating surfaces Hardness of the material and the tool body and the tool body after induction hardening 42CrMo N/mm HRC 54-6 HRC C N/mm HRC 54-6 HRC Specifications for the maximum press force kn/m are indicated as such, 1 t = 1 kn. Tang Punches Rolleri R Type have various tangs. Indications of precision ground areas: α Weinbrenner Explanation R We produce for you the Tools Rolleri Type Weinbrenner in a vast variety custom, fast, economic and with precision. (1.57) 55 (2.17) 7 press force line α press force line 42 (1.65) 7 (.28) (.39) 1 25 (.98) 3 (.12) Adapters for Rolleri Type Weinbrenner see pages R α H press force line inner radius 54-6 HRC Tool lengths, sectionings and horn types press force line tools Rolleri type are available in any length customized sectioning available upon your measurements 45 (1.77) customized horn pieces available upon request α R 35 (1.38) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 15 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 151

7 American (.79) R 25 (.98) 9 (.35) ROLLERI TYPE Tool lengths, sectionings and horn types Punches: 838 mm (33 in) 415 mm (16.34 in) 85 mm (31.69 in) segmented 9 segments (1 Horn left, 1, 5,,, 15, 1, 37, 1 Horn right) Punches American Standard-Horn Type for all segmented Punches Rolleri Type American Dies: 838 mm (33 in) 415 mm (16.34 in) 85 mm (31.69 in) segmented 8 segments (, 5,,, 15, 1, 37, 1) ASP-9 H 19 (.75) (.22) (.53) 85 R ROLLERI TYPE Punches American 15.8 (.63) 12.7 (.5) 38 (.15) 9.5 (.375) 42Cr: N/mm 2 ASP-9-16 ASP-9-31 ASP-9-63 ASP ASP kn/m max. 1 kn/m max. H=96 (3.78) / R=.4 (.16) H=95.9 (3.78) / R=.4 (.16) 15.8 (.63) 838 mm 33. in 13.4 kg 838 mm 33. in 12.8 kg 415 mm in 6.6 kg 12.7 (.5) 415 mm in 6.2 kg 85 mm in segmented segmented 12.9 kg 85 mm in segmented segmented 12.1 kg H=95.9 (3.78) / R=.8 (.31) H=96 (3.78) / R=.8 (.31) 838 mm 33. in 13.4 kg mm 33. in 12.8 kg (1.) 415 mm in 6.6 kg 85 mm in segmented segmented 12.9 kg 415 mm in 6.2 kg H=95.9 (3.78) / R=1.6 (.63) 85 mm in segmented segmented 12.1 kg 838 mm 33. in 13.4 kg H=95.5 (3.76) / R=1.6 (.62) 415 mm in 6.6 kg 85 mm in segmented segmented 12.9 kg 838 mm 33. in 12.8 kg H=95.9 (3.78) / R=2.5 (.98) 415 mm in 6.2 kg mm 33. in 13.4 kg 85 mm in R segmented segmented 12.1 kg 415 mm in 6.6 kg 85 mm in H=94.8 (3.73) / R=3.2 (.125) segmented segmented 12.9 kg 838 mm 33. in 12.8 kg H=96 (3.78) / R=3.2 (.125) 838 mm 33. in 13.4 kg 415 mm in 6.2 kg 415 mm in 6.6 kg 85 mm in segmented segmented 12.1 kg 42Cr: 85 mm in N/mm 2 segmented segmented 12.9 kg H 19 (.75) (.22) (.53) ASP ASP ASP ASP ASP ASP-135 ASP-24 7 kn/m max. ASP- ASP-18 H 19 (.75) (.22) (.53) 85 R 15.8 (.63) 12.7 (.5) 9 (.36) ASP ASP ASP ASP kn/m max. 1 kn/m max. 1 kn/m max. H=125 (4.92) / R=.4 (.16) H=127 (5.) / R=.4 (.16) H=127 (5.) / R=.4 (.16) H=96 (3.78) / R=.8 (.31) 15.8 (.63) 15.8 (.63) 15.8 (.63) 838 mm 33. in 21. kg 838 mm 33. in 31.8 kg 838 mm 33. in 13.4 kg 838 mm 33. in 1.9 kg 12.7 (.5) 12.7 (.5) 12.7 (.5) 415 mm in 1.4 kg 415 mm in 15.8 kg 415 mm in 6.6 kg 415 mm in 5.4 kg 85 mm in segmented segmented.1 kg 85 mm in 85 mm in segmented segmented 3.6 kg segmented segmented 12.9 kg 85 mm in segmented segmented 1.5 kg H=125 (4.92) / R=.8 (.31) H=127 (5.) / R=.8 (.31) H=127 (5.) / R=.8 (.31) H=93.4 (3.68) / R=1.6 (.62) (1.) (1.) 838 mm 33. in 21. kg (2.56) 838 mm 33. in 31.8 kg 838 mm 33. in 13.4 kg 838 mm 33. in 1.9 kg 415 mm in 1.4 kg 415 mm in 15.8 kg 415 mm in 6.6 kg 415 mm in 5.4 kg 85 mm in segmented segmented.1 kg 85 mm in 85 mm in segmented segmented 3.6 kg segmented segmented 12.9 kg 85 mm in segmented segmented 1.5 kg H=124.5 (4.9) / R=1.6 (.62) H=126.5 (4.98) / R=1.6 (.62) H=126.5 (4.98) / R=1.6 (.62) H=87.5 (3.44) / R=3.2 (.125) 838 mm 33. in 21. kg 838 mm 33. in 31.8 kg 838 mm 33. in 13.4 kg 838 mm 33. in 1.9 kg mm in 1.4 kg 415 mm in 15.8 kg 415 mm in 6.6 kg 415 mm in 5.4 kg R 85 mm in segmented segmented.1 kg 85 mm in 85 mm in segmented segmented 3.6 kg segmented segmented 12.9 kg 85 mm in segmented segmented 1.5 kg H=123.8 (4.87) / R=3.2 (.125) 85 H=125.9 (4.96) / R=3.2 (.125) 75 H=126 (4.96) / R=3.2 (.125) 838 mm 33. in 21. kg R 838 mm 33. in 31.8 kg R 838 mm 33. in 13.4 kg 42Cr: N/mm mm in 1.4 kg 415 mm in 15.8 kg 415 mm in 6.6 kg 85 mm in segmented segmented.1 kg 85 mm in 85 mm in 42Cr: N/mm 2 segmented segmented 3.6 kg 42Cr: N/mm 2 segmented segmented 12.9 kg H 19 (.75) (.22) (.53) 12.7 (.5) ASP ASP ASP ASP H 19 (.75) (.22) (.53) ASP--16 ASP--31 ASP--62 ASP--125 H 19 (.75) (.22) (.53) ASP ASP ASP Please find the Punch Adapters in the adapter chapter on page 215 ASP-19 H 19 (.75) (.22) (.53) 28 R 15.8 (.63) 12.7 (.5) (1.25) ASP ASP ASP kn/m max. H=127 (5.) / R=.8 (.31) 838 mm 33. in 13.8 kg 415 mm in 6.8 kg 85 mm in segmented segmented 13.3 kg H=124.5 (4.9) / R=1.6 (.62) 838 mm 33. in 13.8 kg 415 mm in 6.8 kg 85 mm in segmented segmented 13.3 kg H=118.5 (4.67) / R=3.2 (.125) 838 mm 33. in 13.8 kg 415 mm in 6.8 kg 85 mm in segmented segmented 13.3 kg 42Cr: N/mm 2 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 153

8 Dies American ROLLERI TYPE Dies American ROLLERI TYPE ASD (1.94) 15.8 (.63) (.37) (.71) 25.4 (1.) R 2.75 (.18) 1 kn/m max. 838 mm 33. in 8. kg 415 mm in 3.9 kg 85 mm in segmented segmented 7.6 kg 42Cr: N/mm 2 ASD (1.94) 15.8 (.63) (.5) (.71) 25.4 (1.) R 2.75 (.18) 1 kn/m max. 838 mm 33. in 8. kg 415 mm in 3.9 kg 85 mm in segmented segmented 7.6 kg 42Cr: N/mm 2 ASD (2.76) 38.1 (1.5) 75 6 (2.36) R 4. (.157) 1 kn/m max. 838 mm 33. in 25.6 kg 415 mm in 12.7 kg 85 mm in segmented segmented 24.6 kg ASD-75-7 (2.76) 5.8 (2.) 75 7 (2.76) R 4. (.157) 1 kn/m max. 838 mm 33. in 27.7 kg 415 mm in 13.7 kg 85 mm in segmented segmented 25.6 kg 12.7 (.5) 7 (.28) 12.7 (.5) 49.2 (1.94) 15.8 (.63) (1.) R 2.75 (.18) 838 mm 33. in 9.2 kg 838 mm 33. in 1.5 kg 838 mm 33. in 7.2 kg 838 mm 33. in 7.8 kg 19 R 3. (.25) 6.35 R.8 (.375) mm in 4.6 kg R 1.2 (.75) 415 mm in 5.2 kg 415 mm in 3.6 kg 415 mm in 3.9 kg (.1) (.31) (.47) 85 mm in segmented segmented 8.9 kg 85 mm in 85 mm in segmented segmented 1.1 kg segmented segmented 6.9 kg 85 mm in segmented segmented 7.5 kg Cr: N/mm 2 (1.18) 42Cr: N/mm 2 42Cr: N/mm Cr: N/mm (1.) (1.) 49.2 (1.94) 15.8 (.63) 7 (.28) 12.7 (.5) 15.8 (.63) 7 (.28) 12.7 (.5) 7 (2.76) 25.4 (1.) 85 (1.58) R 4. (.157) (.63) 7 (.28) 12.7 (.5) 7 (2.76) (1.25) 75 5 (1.97) R 4. (.157) 15.8 (.63) 12.7 (.5) 15.8 (.63) 15.8 (.63) 7 (.28) 12.7 (.5) ASD kn/m max. ASD kn/m max. ASD (1.94) 45 kn/m max. ASD (1.94) 6 kn/m max (.63) 12.7 (.5) 15.8 (.63) 12.7 (.5) ASD kn/m max. 838 mm 33. in 17.6 kg 415 mm in 8.7 kg 85 mm in segmented segmented 19.9 kg ASD mm 33. in.7 kg 415 mm in 7.3 kg 85 mm in segmented segmented.1 kg ASD kn/m max. 86 kn/m max Cr: N/mm Cr: N/mm 2 (1.) 7 (2.76) 49 (1.94) 15.8 (.63) (.5) 12.7 R 1.6 (.62) 838 mm 33. in 8.4 kg 415 mm in 4.2 kg 85 mm in segmented segmented 8.1 kg 12.7 (.5) ASD (2.76) 25.4 (1.) 75 (1.58) R 4. (.157) 95 kn/m max. 838 mm 33. in 17.6 kg 415 mm in 8.7 kg 85 mm in segmented segmented 16.9 kg ASD kn/m max. 838 mm 33. in 22.2 kg 415 mm in 11. kg 85 mm in segmented segmented 21.3 kg 15.8 (.63) 19 (.75) 75 3 (1.18) R 3 (.118) 15.9 (.63) 12.7 (.5) 7 (.28) 12.7 (.5) 7 (.28) 12.7 (.5) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 155

9 ROLLERI TYPE ROLLERI TYPE Gasparini Radius Tools Gasparini Tool lengths, sectionings and horn types Punches: 525 mm (.67 in) 495 mm (19.49 in) segmented 8 segments (25, 3, 35,, 45, 5, 1, 17) 5 mm (19.68 in) segmented 3 segments (1 Horn left, 3, 1 Horn right) 3 (1.18) 1 R (.79) 13 (.51) Standard-Horn Type for all segmented Punches Rolleri Type Gasparini Radius Tools Holder: 522 mm (.55 in) 563 mm (22.17 in) segmented 9 segments (42, 47, 52, 57, 62, 67, 72, 77, 87) 491 mm (19.33 in) segmented 3 segments (97, 297, 97) Radius Tools: 525 mm (.67 in) 59 mm (23.23 in) segmented 9 segments (45, 5, 55, 6, 65, 7, 75, 8, 9) 5 mm (19.68 in) segmented 3 segments (1, 3, 1) GASP R 3 (.118) GASP (1.97) (1.57) (1.57) 3 (1.18) 1 kn/m max. 525 mm.67 in 4.7 kg 59 mm in segmented segmented 5.3 kg 5 mm in segmented segmented 4.5 kg GASP GASP GASP (1.18) 1 kn/m max. GASP kn/m max (11.53) 1 kn/m max. 525 mm.67 in 4.2 kg 59 mm in segmented segmented 4.7 kg 5 mm in segmented segmented 4. kg 6 R 8 (.315) 45 (1.77) 35 (1.38) 3 (1.18) (1.57) 1 kn/m max. 525 mm.67 in 4.7 kg 59 mm in segmented segmented 5.3 kg 5 mm in segmented segmented 4.5 kg 1 kn/m max. 525 mm.67 in 4.7 kg 59 mm in segmented segmented 5.3 kg 5 mm in segmented segmented 4.5 kg Radius Tools Gasparini 6 R 11.5 (.453) 6 R 16 (.63) 25 (.98) 5 (.) 522 mm.55 in 83. kg 563 mm in segmented segmented 89.5 kg 491 mm in segmented segmented 78. kg 25 (.98) 5 (.) 3 (1.18) 522 mm.55 in 25. kg 563 mm in segmented segmented 27. kg 491 mm in segmented segmented 23.5 kg GASP3.6. (1.57) 3 (1.18) 1 kn/m max. 525 mm.67 in 5. kg 59 mm in segmented segmented 5.6 kg 5 mm in segmented segmented 4.3 kg GASP (1.18) (1.57) 1 kn/m max. 525 mm.67 in 7. kg 59 mm in segmented segmented 7.8 kg 5 mm in segmented segmented 6.7 kg 17 (6.69) 6 R (.787) 6 R GASP35.. R (1.575) 45 (1.77) 35 (1.38) 15 kn/m max. 525 mm.67 in 1.5 kg 59 mm in segmented segmented 11.8 kg 5 mm in segmented segmented 1. kg GASP55..6 R 6 (2.362) 65 (2.56) 55 (2.17) 18 kn/m max. 525 mm.67 in 24.4 kg 59 mm in segmented segmented 27.4 kg 5 mm in segmented segmented 23.2 kg Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 157

10 ROLLERI TYPE ROLLERI TYPE Punches Gasparini Ajial-Axial GASP.7.R (.98) 5 (.) 3 (1.18) 1 1 kn/m max. 525 mm.67 in 31.8 kg 495 mm in segmented segmented 3. kg 5 mm in segmented segmented 3.3 kg 42Cr: N/mm 2 Tool lengths, sectionings and horn types Punches: 1 mm (.16 in) 99 mm (38.98 in) segmented 9 segments (1 Horn left, 5, 1, 5, 45,, 35,, 1 Horn right) (.79) 45 1 (.39) Standard-Horn Type for all segmented Punches Rolleri Type Ajial-Axial 8 6 Punches Ajial-Axial (7.87) Many more tools available for Heavy Duty on pages AXP (.71) 5.5 (.22) 15.5 (.61) 1 kn/m max. 1 mm.16 in 16.3 kg 99 mm in segmented segmented 15.8 kg AXP (.71) 5.5 (.22) 15.5 (.61) 1 kn/m max. 1 mm.16 in 1. kg 99 mm in segmented segmented 9.7 kg 6 1 (3.94) 72 (2.83) 26 (1.2) 7 R 3. (.118) 16.7 (.66) 9 1. (.39) 9 1. (.39) GASP.26.R kn/m max. GASP.26.R kn/m max. 25 (.98) 5 (.) 3 (1.18) mm.67 in 16.9 kg 495 mm in segmented segmented 1.6 kg 5 mm in segmented segmented 1.7 kg 25 (.98) 5 (.) 3 (1.18) 42Cr: N/mm 2 42Cr: N/mm mm.67 in 16.9 kg 495 mm in segmented segmented 1.6 kg 5 mm in segmented segmented 1.7 kg AXP (2.83) 18 (.71) 5.5 (.22) 26 (1.2) 15.5 (.61) 1 kn/m max. 1 mm.16 in 1. kg 99 mm in segmented segmented 9.7 kg AXP R5 72 (2.83) 18 (.71) 5.5 (.22) 15.5 (.61) 1 kn/m max. 1 mm.16 in 7.1 kg 99 mm in segmented segmented 6.9 kg (.39) 24 R.5 (.) (7.87) 1 (7.87) 1 Adapters Ajial-Axial AD15 1 kn/m max mm 5.91 in 4. kg 26 R 3. (.118) Many more tools available upon request. Compatible adapters see pages 213 and R 6. (.236) 1 (3.94) 5 (1.97) 18 (.71) 5.5 (.22) 15.5 (.61) (.55) Rolleri Type Ajial-Axial More Punches and Dies available upon request. Compatible Adapter see pages 217 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 159

11 ROLLERI TYPE ROLLERI TYPE Colgar LVD Tool lengths, sectionings and horn types Punches: 525 mm (.67 in) 495 mm (19.49 in) segmented 8 segments (25, 3, 35,, 45, 5, 1, 17) 5 mm (19.68 in) segmented 3 segments (1 Horn left, 3, 1 Horn right) 3 (1.18) 1 R (.79) 13 (.51) Standard-Horn Type for all segmented Punches Rolleri Type Colgar Tool lengths, sectionings and horn types Punches: 58 mm (. in) 55 mm (21.65 in) segmented 9 segments (1 Horn left, 25, 3, 35,, 45, 5, 125, 1 Horn right) 35 (1.38) 1 R (.787) Standard-Horn Type for all segmented Punches Rolleri Type LVD Dies: 58 mm (. in) 55 mm (21.65 in) segmented 9 segments (25, 25, 3, 35,, 45, 5, 1, ) Hemming Tools: 525 mm (.67 in) 495 mm (19.49 in) segmented 8 segments (25, 3, 35,, 45, 5, 1, 17) Punches and Radius Tools Colgar 1 (.39) PAC R8 38 (1.5) 6 18 (.71) 1 (.39) 1 kn/m max. 525 mm.67 in.6 kg 495 mm in segmented segmented 19.4 kg 5 mm in segmented segmented 19.6 kg 42Cr: N/mm 2 PAC195.6.R8 38 (1.5) 6 18 (.71) 1 (.39) 1 kn/m max. 525 mm.67 in 12. kg 495 mm in segmented segmented 11.3 kg 5 mm in segmented segmented 11.4 kg 42Cr: N/mm 2 Punch Tangs Punches LVD have the following 4 different tangs 195 (7.68) (7.68) (.87) (.51) 13 1 (.39) 5 (.) 17 (.67) 18 (.71) 15 (.59) 1 (.39) 22 (.87) 37 (1.46) 25 (.98) 1 (.39) 27 (1.6) 42 (1.65) 35 (1.38) (.79) 3 (1.18) 1 (.39) Tang A Tang B Tang C Tang D R.8 (.31) 6 R.8 (.31) PAC R8 38 (1.5) 6 18 (.71) 1 (.39) PAC kn/m max. 1 kn/m max. 525 mm.67 in 12. kg 495 mm in segmented segmented 11.3 kg 5 mm in segmented segmented 11.4 kg 6 18 (.71) 1 (.39) 83 mm in 18. kg 412 mm in 9. kg 42Cr: N/mm (7.68) (6.89) Compatible Radius holders see page More Punches and Dies available upon request. Compatible adapter see pages 213, (1.97) (.55) 26 R.8 (.31) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 16 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 161

12 Punches LVD ROLLERI TYPE ROLLERI TYPE Hemming Tools LVD LP18.78.R1-A 18 (7.9) 18 (7.9) 18 (7.9) 8 (3.15) R 1 (.39) LP18.78.R1-C 65 (2.56) R 1 (.39) LP18.26-R1 (1.57) 26 R 1 (.39) Tangs A, B, C, D s. p Tangs A, B, C, D s. p. 161 Tangs A, B, C, D s. p Cr: N/mm 2 42Cr: N/mm 2 7 kn/m max. Tang A: LPA18.78.R1-A 58 mm. in 22. kg 55 mm in segmented segmented 23.8 kg Tang B: LPB18.78.R1-A 58 mm. in 22. kg 55 mm in segmented segmented 23.8 kg Tang C: LPC18.78.R1-A 58 mm. in 22. kg 55 mm in segmented segmented 23.8 kg Tang D: LPD18.78.R1-A 58 mm. in 22. kg 55 mm in segmented segmented 23.8 kg 5 kn/m max. Tang A: LPA18.78.R1-C 58 mm. in 11. kg 55 mm in segmented segmented 12. kg Tang B: LPB18.78.R1-C 58 mm. in 11. kg 55 mm in segmented segmented 12. kg Tang C: LPC18.78.R1-C 58 mm. in 11. kg 55 mm in segmented segmented 12. kg Tang D: LPD18.78.R1-C 58 mm. in 11. kg 55 mm in segmented segmented 12. kg 5 kn/m max. Tang A: LPA18.26-R1 58 mm. in 9. kg 55 mm in segmented segmented 1. kg Tang B: LPB18.26-R1 58 mm. in 9. kg 55 mm in segmented segmented 1. kg Tang C: LPC18.26-R1 58 mm. in 9. kg 55 mm in segmented segmented 1. kg Tang D: LPD18.26-R1 58 mm. in 9. kg 55 mm in segmented segmented 1. kg LP18.78.R1-B 18 (7.9) 18 (7.9) R 1 (.39) LP18.78-R2 R 2 (.79) Tangs A, B, C, D s. p Tangs A, B, C, D s. p kn/m max. Tang A: LPA18.78.R1-B 58 mm. in 22. kg 55 mm in segmented segmented 24. kg Tang B: LPB18.78.R1-B 58 mm. in 22. kg 55 mm in segmented segmented 24. kg Tang C: LPC18.78.R1-B 58 mm. in 22. kg 55 mm in segmented segmented 24. kg Tang D: LPD18.78.R1-B 58 mm. in 22. kg 55 mm in segmented segmented 24. kg 42Cr: N/mm 2 42Cr: N/mm 2 1 kn/m max. Tang A: LPA18.78-R2 58 mm. in 9. kg 55 mm in segmented segmented 9.7 kg Tang B: LPB18.78-R2 58 mm. in 9. kg 55 mm in segmented segmented 9.7 kg Tang C: LPC18.78-R2 58 mm. in 9. kg 55 mm in segmented segmented 9.7 kg Tang D: LPD18.78-R2 58 mm. in 9. kg 55 mm in segmented segmented 9.7 kg LP.SP LP.SM / Cr: N/mm 2 42Cr: N/mm 2 42Cr: N/mm 2 42Cr: N/mm (6.61) 168 (6.61) 168 (6.61) 58 (2.28) R.6 (.24) 58 (2.28) R.6 (.24) 58 (2.28) R.6 (.24) 8 (.31) LP.SP (.39) LP.SP (.47) Tangs A, B, C, D s. p Tangs A, B, C, D s. p. 161 Tangs A, B, C, D s. p Tang A: LPA.SP mm.67 in 13.4 kg 495 mm in segmented segmented 12.6 kg Tang B: LPB.SP mm.67 in 13.4 kg 495 mm in segmented segmented 12.6 kg Tang C: LPC.SP mm.67 in 13.4 kg 495 mm in segmented segmented 12.6 kg Tang D: LPD.SP mm.67 in 13.4 kg 495 mm in segmented segmented 12.6 kg Tang A: LPA.SP mm.67 in 13.1 kg 495 mm in segmented segmented 12.3 kg Tang B: LPB.SP mm.67 in 13.1 kg 495 mm in segmented segmented 12.3 kg Tang C: LPC.SP mm.67 in 13.1 kg 495 mm in segmented segmented 12.3 kg Tang D: LPD.SP mm.67 in 13.1 kg 495 mm in segmented segmented 12.3 kg Tang A: LPA.SP mm.67 in 13.6 kg 495 mm in segmented segmented 12.8 kg Tang B: LPB.SP mm.67 in 13.6 kg 495 mm in segmented segmented 12.8 kg Tang C: LPC.SP mm.67 in 13.6 kg 495 mm in segmented segmented 12.8 kg Tang D: LPD.SP mm.67 in 13.6 kg 495 mm in segmented segmented 12.8 kg 8 (3.15) 19 (.75) LP.SM / (3.15) 19 (.75) 59 (2.32) 1 (.39) 7 (.28) B 6 (2.36) R 1 (.39) LP.SM / -12 A 8 (3.15) 19 (.75) 59 (2.32) 59 (2.32) 8 (.31) 7 (.28) B 6 (2.36) 12 (.47) 7 (.28) B 6 (2.36) Example of Application S mm S in S R 1 (.39) R 1 (.39) B=12.7 mm (.5 in) 525 mm.67 in 18.7 kg 495 mm in segmented segmented 17.7 kg B=12 mm (.47 in) 525 mm.67 in 18.7 kg 495 mm in segmented segmented 17.7 kg 42Cr: N/mm 2 B=12.7 mm (.5 in) 525 mm.67 in 18.3 kg 495 mm in segmented segmented 17.2 kg B=12 mm (.47 in) 525 mm.67 in 18.3 kg 495 mm in segmented segmented 17.2 kg 42Cr: N/mm 2 B=12.7 mm (.5 in) 525 mm.67 in 17.8 kg 495 mm in segmented segmented 16.7 kg B=12 mm (.47 in) 525 mm.67 in 17.8 kg 495 mm in segmented segmented 16.7 kg 42Cr: N/mm 2 5 kn/m max. 1 kn/m max. A mm A in R.45 Kgf/mm 2 t/m R.7 Kgf/mm 2 t/m S mm S in 2XS 2XS A mm A in R.45 Kgf/mm 2 t/m S R.7 Kgf/mm 2 t/m Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 163

13 Dies LVD ROLLERI TYPE Dies LVD ROLLERI TYPE LM (.24) kn/m max. 58 mm. in 8. kg 55 mm in segmented segmented 8.6 kg LM (.31) kn/m max. 58 mm. in 8. kg 55 mm in segmented segmented 8.6 kg LM9..78 (1.57) 58 mm. in 13. kg 55 mm in segmented segmented. kg LM kn/m max. 15 kn/m max. 5 (1.97) 58 mm. in 19.5 kg 55 mm in segmented segmented 21. kg 9 (3.54) 12 (.47) 42Cr: N/mm 2 9 (3.54) 12 (.47) 42Cr: N/mm 2 9 (3.54) 5 (1.97) 42Cr: N/mm 2 9 (3.54) 6 (2.36) 42Cr: N/mm 2 19 (.75) 7 (.28) 12.7 (.5) 19 (.75) 7 (.28) 12.7 (.5) 19 (.75) 7 (.28) 12.7 (.5) 19 (.75) 7 (.28) 12.7 (.5) LM (.39) 5 kn/m max. 58 mm. in 7. kg 55 mm in segmented segmented 7.5 kg LM (.47) 6 kn/m max. 58 mm. in 8. kg 55 mm in segmented segmented 8.7 kg LM (2.36) 15 kn/m max. 58 mm. in 23. kg 55 mm in segmented segmented 24.9 kg LM (3.15) 15 kn/m max. 58 mm. in 25.5 kg 55 mm in segmented segmented 27.6 kg 9 (3.54) (.55) 42Cr: N/mm 2 9 (3.54) 18 (.71) 42Cr: N/mm 2 9 (3.54) 7 (2.76) 42Cr: N/mm 2 9 (3.54) 9 (3.54) 42Cr: N/mm 2 19 (.75) LM (3.54) 7 (.28) 12.7 (.5) 16 (.63) 25 (.98) 42Cr: N/mm 2 8 kn/m max. 58 mm. in 1. kg 55 mm in segmented segmented 1.8 kg 19 (.75) LM (3.54) 7 (.28) 12.7 (.5) (.79) 42Cr: N/mm 2 1 kn/m max. 58 mm. in 11.9 kg 55 mm in segmented segmented 12.8 kg 19 (.75) LM (3.54) 7 (.28) 12.7 (.5) 1 (3.94) 42Cr: N/mm 2 1 kn/m max. 58 mm. in 31. kg 55 mm in segmented segmented 33.5 kg 19 (.75) 7 (.28) 12.7 (.5) 7 19 (.75) 7 (.28) 12.7 (.5) 19 (.75) 7 (.28) 12.7 (.5) 19 (.75) 1 (4.72) 7 (.28) 12.7 (.5) s Please note that delivery time varies according to your location. LM (.94) 1 kn/m max. 58 mm. in 1. kg 55 mm in segmented segmented 1.8 kg LM (1.18) 11 kn/m max. 58 mm. in 12. kg 55 mm in segmented segmented 13. kg 42Cr: N/mm 2 42Cr: N/mm 2 9 (3.54) 9 (3.54) (1.57) 19 (.75) 7 (.28) 12.7 (.5) 19 (.75) 7 (.28) 12.7 (.5) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 165

14 Dies 3 LVD ROLLERI TYPE ROLLERI TYPE Multi-V Dies LVD LM (3.54) 19 (.75) 6 (.24) 3 16 (.63) 7 (.28) 12.7 (.5) 58 mm. in 8. kg 55 mm in segmented segmented 8.6 kg LM9.8.3 kn/m max. 2 kn/m max. 3 42Cr: N/mm Cr: N/mm 2 (.71) 9 (3.54) 19 (.75) 8 (.31) 7 (.28) 12.7 (.5) 58 mm. in 8. kg 55 mm in segmented segmented 8.6 kg LM7 R 2 (.79) R 1 (.39) 3 (.12) 34 (1.34) 12 (.47) R 1 (.39) 35 (1.38) 6.5 (.26) 7 (2.76) 3 R 1.5 (.59) (.12) (.94) 16 3 (.12) (.31) (.79) (.63) 12 (.47) 7 (2.76) R 2 (.79) R 4 (.157) 58 mm. in 16.8 kg 55 mm in segmented segmented 18.2 kg 42Cr: N/mm 2 LM9 R 5 (.197) (.) 5 8 (.31) (1.57) 15 (.59) 16 (.63) (.79) R 3 (.118) R 6 (.236) 15 (.59) R.8 (.31) 3 55 (2.17) 9 (3.54) 24 (.94) 12 5 (.) 9 (3.54) (.47) 15 (.59) R 1 (.39) R 2 (.79) 58 mm. in 25.4 kg 55 mm in segmented segmented 27.5 kg 42Cr: N/mm 2 LM (.39) 3 kn/m max. 58 mm. in 8. kg 55 mm in segmented segmented 8.6 kg LM (.47) 38 kn/m max. 58 mm. in 11.9 kg 55 mm in segmented segmented 12.6 kg V1 V2 V3 V4 V5 V6 V mm (in) 12 (.47) 12 (.47) 35 (1.38) 24 (.94) 16 (.63) 8 (.31) Angle 3 kn/m max V1 V2 V3 V4 V5 V6 V mm (in) 8 (.31) (1.57) 12 (.47) 24 (.94) 55 (2.17) 16 (.63) Angle 3 kn/m max Cr: N/mm Cr: N/mm 2 19 (.75) 9 (3.54) LM (.75) 9 (3.54) LM (.98) 7 (.28) 12.7 (.5) 16 (.63) 3 7 (.28) 12.7 (.5) 24 (.94) 42Cr: N/mm 2 38 kn/m max. 58 mm. in 11.5 kg 55 mm in segmented segmented 12.4 kg 55 kn/m max. 58 mm. in 13. kg 55 mm in segmented segmented. kg 19 (.75) 9 (3.54) LM (.75) 9 (3.54) 7 (.28) 12.7 (.5) (.79) 3 (1.57) 7 (.28) 12.7 (.5) 42Cr: N/mm 2 38 kn/m max. 58 mm. in 13.8 kg 55 mm in segmented segmented 15. kg LM13 45 (1.77) 24 (.94) R 2 (.79) R 1 (.39) (.47) (.63) 12 (.47) 15 (.59) 3 R 3 (.118) R 8 (.315) 6 (2.36) 8 (3.15) 33 (1.3) 13 (5.12) R 1 (.394) 27 (1.6) 58 mm. in 51.8 kg 55 mm in segmented segmented 56.1 kg (1.57) (1.57) 1 15 (.59) 13 (5.12) (.39) R.8 (.31) R 5 (.197) LM18 42Cr: N/mm 2 42Cr: N/mm 2 (1.57) (.79) R 5 (.197) R 15 (.591) (.39) 1 1 (3.94) 18 (7.9) 1 (5.51) 58 mm. in 87.9 kg 55 mm in segmented segmented 95.2 kg R 8 (.315) 1 (.39) 6 (2.36) (.79) 18 (7.9) R 8 (.315) 7 9 (3.54) 3 5 (1.97) 42Cr: N/mm 2 V1 V2 V3 V4 V5 V6 V7 V mm (in) 16 (.63) 6 (2.36) 1 (.39) 8 (3.15) (1.57) 12 (.47) 24 (.94) Angle 3 kn/m max V1 V2 V3 V4 V mm (in) 1 (5.51) 6 (2.36) 1 (3.94) (1.57) Angle kn/m max (.75) 7 (.28) 12.7 (.5) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 167

15 Adapters LVD AD1 8 (3.15) ROLLERI TYPE 3 (1.18) 5 (1.97) (1.57) (.59) Tangs A, B, C, D s. p kn/m max. Tang A: AD1-A 15 mm 5.91 in 3.1 kg Tang B: AD1-B 15 mm 5.91 in 3.1 kg Tang C: AD1-C 15 mm 5.91 in 3.1 kg Tang D: AD1-D 15 mm 5.91 in 3.1 kg Rolleri Type LVD AD LVD 6 (2.36) Tangs A, B, C, D s. p. 161 Bolted Adapters AW1 A-D see page kn/m max. Tang A: AD LVD-A 15 mm 5.91 in 3.6 kg Tang B: AD LVD-B 15 mm 5.91 in 3.8 kg Tang C: AD LVD-C 15 mm 5.91 in 4. kg Tang D: AD LVD-D 15 mm 5.91 in 4. kg Rolleri Type LVD Rolleri Type R2 Colly 1 (.39) 45 ROLLERI TYPE Tool lengths, sectionings and horn types Punches: 1 mm (.16 in) 125 mm (49.21 in) segmented 15 segments (1 Horn left, 3, 3, 3, 35,,, 45, 45, 5, 5, 55, 5, 1, 1 Horn right) 1 (.39) Standard-Horn Type for all segmented Punches Rolleri Type Colly Dies: 1 mm (.16 in) 125 mm (49.21 in) segmented segments (1, 3, 3, 3, 35,,, 45, 45, 5, 5, 55, 5, ) AD (1.18) 48 (1.89) 13.1 (.52) 7 (.28) 12.7 (.5).5 (.81) 1 kn/m max. AD kn/m max. 1 mm in 15. kg 5 mm in 7.5 kg Rolleri Type LVD Rolleri Type R2/R3 (1.57) 19 (.75) 7 (.28) 12.7 (.5) 6 (2.36) 835 mm in 17. kg 415 mm in 8.5 kg Rolleri Type LVD Punches Colly CP (.71) 5.5 (.22) 12.5 (.49) 15.5 (.61) (.8) (.53) 6.75 (.27) 1 mm.16 in 1.2 kg 125 mm in segmented segmented 12.5 kg 7 72 (2.83) 9.8 (.31) Modification: Wedge Bar / Tail To use Dies Rolleri Type R1, a 1 mm (.39 in) groove is milled and polished in order to fit a wedge bar / tail of the required measurment. A31 Wedge Bar / Tail: 12 x 29 mm (.47 x 1.) for Rolleri Type LVD 1 (.39) 835 mm in 415 mm in 85 mm in segmented segmented A32 Wedge Bar / Tail: 12.7 x 29 mm (.5 x 1.) for Rolleri Type LVD 1 (.39) 835 mm in 415 mm in 85 mm in segmented segmented CP (4.72) 18 (.71) 5.5 (.22) 12.5 (.49) 15.5 (.61) (.8) (.53) 6.75 (.27) 6 1 mm.16 in 18.5 kg 125 mm in segmented segmented 22.6 kg CP A 1 (3.94) 18 (.71) 5.5 (.22) 12.5 (.49) 15.5 (.61) (.8) (.53) 6.75 (.27) 1 mm.16 in 16.7 kg 125 mm in segmented segmented.4 kg 19 (.75) 7 (.28) 12 (.47) 19 (.75) 7 (.28) 12.7 (.5) (.31) 88.8 (.31) 9 (.35) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 169

16 Punches Colly ROLLERI TYPE Punches Colly ROLLERI TYPE CP.85.7 (.79) 5.5 (.22).5 (.57) (.8) 2 16 (.63) 8 (.31) 1 mm.16 in 31.6 kg 125 mm in segmented segmented 49. kg 42Cr: N/mm 2 CP.85.7-A (.79) 5.5 (.22).5 (.57) (.8) 2 16 (.63) 8 (.31) 1 mm.16 in 49. kg 125 mm in segmented segmented 6. kg 42Cr: N/mm 2 CP.5.R1 (.79) (.22) (.57) (.8) 2 16 (.63) 8 (.31) 1 mm.16 in 31. kg 125 mm in segmented segmented 38. kg CP.5.R1-A (.79) (.22) (.57) (.8) 2 16 (.63) 8 (.31) 1 mm.16 in 52. kg 125 mm in segmented segmented 63.7 kg 42Cr: N/mm 2 42Cr: N/mm (7.87) (7.87) (.79) (7.87) (7.87) CP (4.72) 18 (.71) 5.5 (.22) 12.5 (.49).7 (.28) 6 12 (.47) 15.5 (.61) (.8) (.53) 6.75 (.27) 1 mm.16 in 17.9 kg 125 mm in segmented segmented 21.9 kg 85 CP A 1 (4.72) 18 (.71) 5.5 (.22) 12.5 (.49).7 (.28) 15.5 (.61) (.8) (.53) 6.75 (.27) 6 1 mm.16 in 25.5 kg 125 mm in segmented segmented 31.3 kg 5 R 1 (.39) CP1.5.R1 1 (4.72) 18 (.71) 5.5 (.22) 12.5 (.49) (.61) (.8) (.53) 6.75 (.27) 6 1 mm.16 in 17. kg 125 mm in segmented segmented.8 kg 5 R 1 (.39) CP1.5.R1-A 1 (4.72) 18 (.71) 5.5 (.22) 12.5 (.49) (.61) (.8) (.53) 6.75 (.27) 6 1 mm.16 in 31. kg 125 mm in segmented segmented 38. kg 42Cr: N/mm CP A 18 (.71) 5.5 (.22) 85.7 (.28) 12.5 (.49) 15.5 (.61) (.8) (.53) 6.75 (.27) 1 mm.16 in 16.7 kg 125 mm in segmented segmented.4 kg CP (.71) 85.7 (.28) 5.5 (.22) 12.5 (.49) 15.5 (.61) (.8) (.53) 6.75 (.27) 1 mm.16 in 1. kg 125 mm in segmented segmented 12.3 kg 5 R 1 (.39) CP1.5.R1 1 (3.94) 18 (.71) 5.5 (.22) 12.5 (.49) 15.5 (.61) (.8) (.53) 6.75 (.27) 1 mm.16 in 13. kg 125 mm in segmented segmented 16. kg 42Cr: N/mm 2 CP.24.R1 (.79) (.22) (.57) 5 R 1 (.39) (.8) 2 16 (.63) 8 (.31) mm.16 in 22. kg 125 mm in segmented segmented 26.9 kg 42Cr: N/mm 2 1 (3.94) 72 (2.83) 9.8 (.31) 5 R 1 (.39) (7.87) (.28) Bolted Adapters see page R 1 (.39) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 17 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 171

17 Dies Colly ROLLERI TYPE Dies Colly ROLLERI TYPE M (2.36) R 4 (.157) 1 mm.16 in 6. kg 125 mm in segmented segmented 73.6 kg M (3.15) R 4 (.157) 1 mm.16 in 8. kg 125 mm in segmented segmented 98. kg M (1.97) R 4 (.157) 1 mm.16 in 45.5 kg 125 mm in segmented segmented 55.7 kg M (1.18) 16 (.63) R 2 (.79) 1 mm.16 in 24.9 kg 125 mm in segmented segmented 31. kg 115 (4.53) 8 R 1 (.394) 115 (4.53) 8 R 12 (.472) 115 (4.53) 5 R 9 (.354) 115 (4.53) 24 R 3.5 (.138) 15 (.59) 15 (.59) 15 (.59) 24 R 1.5 (.59) 3 (1.18) 8 (3.15) 3 (1.18) 11 (4.33) 3 (1.18) 65 (2.56) (.31) 8 R 2 (.79) M (4.53) 3 (1.18) 16 (.63) 5 R 2 (.79) R 2 (.79) 1 mm.16 in 26.5 kg 125 mm in segmented segmented 32.4 kg M (4.53) 3 (1.18) 22 (.87) 5 R 2 (.79) R 2 (.79) 1 mm.16 in 25.5 kg 125 mm in segmented segmented 31.2 kg MC R 5 (.197) R 3 (.118) 112 (4.41) 8 (3.15) 112 (4.41) 6 (2.36) 85 7 (2.76) 35 mm 1.8 in 188. kg R 3 (.118) MC8.5 / MC (3.15) R 3 (.118) R 2 (.79) (1.57) 8 (3.15) 6 (2.36) 85 3 (1.18) R 1 (.39) 5 mm 8.71 in 66. kg 35 mm 1.8 in 98. kg 7 5 R 1 (.39) 5 R 1.5 (.59) 5 (1.97) R 2 (.79) (.31) 8 R 2 (.79) (.47) 12 R 2 (.79) 5 (1.97) R 2 (.79) M (1.18) R 3 (.118) 1 mm.16 in 34.5 kg 125 mm in segmented segmented 43. kg M (1.57) R 3 (.118) 1 mm.16 in 36. kg 125 mm in segmented segmented 44. kg MC74.5 / MC (2.91) 5 mm 8.71 in 67. kg 35 mm 1.8 in 11. kg MC54.5 / MC (2.13) 5 mm 8.71 in 35.6 kg 35 mm 1.8 in 53. kg 115 (4.53) 5 R 3 (.118) 115 (4.53) 5 R 5 (.197) 74 (2.91) V9 V1 V2 V3 V4 α V5 54 (2.13) V9 V1 V2 V3 α V5 V4 V8 V7 V6 V8 V7 V6 3 (1.18) (1.57) 3 (1.18) 5 (1.97) V1 V2 V3 V4 V5 V6 V7 V8 V9 V mm (in) 8 (.31) 24 (.94) 1 (.39) 8 (.31) 45 (1.77) 18 (.71) 12 (.47) (.55) 32 (1.26) Angle R mm (in).8 (.31).8 (.31) 2. (.79).8 (.31) 2. (.79) 1. (.39) 2. (.79) 2. (.79) 2. (.79) V1 V2 V3 V4 V5 V6 V7 V8 V9 V mm (in) 6 (.24) 25 (.98) 6 (.24) 6 (.24) 12 (.47) 9 (.35) 16 (.63) 9 (.35) 32 (1.26) Angle R mm (in).5 (.) 1. (.39).5 (.) 2. (.79).5 (.) 1. (.39).5 (.) 1.5 (.59) 1. (.39) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 173

18 ROLLERI TYPE ROLLERI TYPE Hämmerle-Bystronic Punches Hämmerle-Bystronic Tool lengths, sectionings and horn types Punches H11: Punches H12: Punches H21: LSX LDX SX L DX LSX L LDX LSX L LDX 25 (.98) (.79) Dies H31, H41: SX DX L1 1 (3.94) 1 (3.94) 18 (.71) H (3.54) 6 (.24) 3.2 (.8) HRc kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.28 kg H DX 3.35 DX.32 kg H DX 3.74 DX.36 kg H DX 4.13 DX.38 kg H DX 4.53 DX.44 kg H SX 3.15 SX.3 kg H SX 2.95 SX.28 kg H SX 3.35 SX.32 kg H SX 3.74 SX.36 kg H SX 4.13 SX.38 kg H SX 4.53 SX.44 kg H DX 3.15 DX.3 kg H (3.54) 3 R 1 (.39) 6 (.24) HRc kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.28 kg H DX 3.35 DX.32 kg H DX 3.74 DX.36 kg H DX 4.13 DX.38 kg H DX 4.53 DX.44 kg H SX 3.15 SX.3 kg H SX 2.95 SX.28 kg H SX 3.35 SX.32 kg H SX 3.74 SX.36 kg H SX 4.13 SX.38 kg H SX 4.53 SX.44 kg H DX 3.15 DX.3 kg Punches Hämmerle-Bystronic 7 H11.1. (1.57) 3 R 1 (.39) 6 (.24) 6 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.12 kg H DX 3.35 DX. kg H DX 3.74 DX.15 kg H DX 4.13 DX.17 kg H DX 4.53 DX.19 kg H SX 3.15 SX.13 kg H SX 2.95 SX.12 kg H SX 3.35 SX. kg H SX 3.74 SX.15 kg H SX 4.13 SX.17 kg H SX 4.53 SX.19 kg H (2.36) 3 R 1 (.39) 6 (.24) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.18 kg H DX 3.35 DX.21 kg H DX 3.74 DX.23 kg H DX 4.13 DX.25 kg H DX 4.53 DX.29 kg H SX 3.15 SX. kg H SX 2.95 SX.18 kg H SX 3.35 SX.21 kg H SX 3.74 SX.23 kg H SX 4.13 SX.25 kg H SX 4.53 SX.29 kg H kn/m max. H11.6. HRc 58-6 H DX 3.15 DX.13 kg HRc 58-6 H DX 3.15 DX. kg HRc 58-6 H DX 3.15 DX.33 kg HRc (3.54) 3 R 1 (.39) 8 (.31) 6 (.24) H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.31 kg H DX 3.35 DX.35 kg H DX 3.74 DX. kg H DX 4.13 DX.46 kg H DX 4.53 DX.48 kg H SX 3.15 SX.33 kg H SX 2.95 SX.31 kg H SX 3.35 SX.35 kg H SX 3.74 SX. kg H SX 4.13 SX.46 kg H SX 4.53 SX.48 kg 9 (3.54) 3 R 2 (.79) 8 (.31) 6 (.24) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.32 kg H DX 3.35 DX.36 kg H DX 3.74 DX.41 kg H DX 4.13 DX.44 kg H DX 4.53 DX.5 kg H SX 3.15 SX.34 kg H SX 2.95 SX.32 kg H SX 3.35 SX.36 kg H SX 3.74 SX.41 kg H SX 4.13 SX.44 kg H SX 4.53 SX.5 kg H DX 3.15 DX.34 kg Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 175

19 ROLLERI TYPE Punches Hämmerle-Bystronic ROLLERI TYPE Punches Hämmerle-Bystronic H (3.54) 1 (.39) 3 R 4 (.157) 8 (.31) HRc kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.44 kg H DX 3.35 DX.5 kg H DX 3.74 DX.57 kg H DX 4.13 DX.63 kg H DX 4.53 DX.69 kg H SX 3.15 SX.47 kg H SX 2.95 SX.44 kg H SX 3.35 SX.5 kg H SX 3.74 SX.57 kg H SX 4.13 SX.63 kg H SX 4.53 SX.69 kg H DX 3.15 DX.47 kg H (5.51) 3 R 1 (.39) 6 (.24) kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.44 kg H DX 3.35 DX.5 kg H DX 3.74 DX.57 kg H DX 4.13 DX.63 kg H DX 4.53 DX.69 kg H SX 3.15 SX.47 kg H SX 2.95 SX.44 kg H SX 3.35 SX.5 kg H SX 3.74 SX.57 kg H SX 4.13 SX.63 kg H SX 4.53 SX.69 kg H (5.51) (.39) 1 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H HRc 58-6 H DX 3.15 DX.47 kg HRc 58-6 HRc (3.54) R 3 (.118) (.31) 8 6 (.24) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.32 kg H DX 3.35 DX.37 kg H DX 3.74 DX.41 kg H DX 4.13 DX.44 kg H DX 4.53 DX.51 kg H SX 3.15 SX.35 kg H SX 2.95 SX.32 kg H SX 3.35 SX.37 kg H SX 3.74 SX.41 kg H SX 4.13 SX.44 kg H SX 4.53 SX.51 kg H DX 3.15 DX.35 kg H (3.54) 6 (.24) 9.2 (.8) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.3 kg H DX 3.35 DX.34 kg H DX 3.74 DX.39 kg H DX 4.13 DX. kg H DX 4.53 DX.47 kg H SX 3.15 SX.32 kg H SX 2.95 SX.3 kg H SX 3.35 SX.34 kg H SX 3.74 SX.39 kg H SX 4.13 SX. kg H SX 4.53 SX.47 kg H (5.51) 9 12 (.47) 6.2 (.8) 6 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.84 kg H DX 3.35 DX.96 kg H DX 3.74 DX 1.8 kg H DX 4.13 DX 1.21 kg H DX 4.53 DX 1.32 kg H SX 3.15 SX.9 kg H SX 2.95 SX.84 kg H SX 3.35 SX.96 kg H SX 3.74 SX 1.8 kg H SX 4.13 SX 1.21 kg H SX 4.53 SX 1.32 kg H (3.54) R 5 (.197) (.35) 9 1 (.39) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.44 kg H DX 3.35 DX.5 kg H DX 3.74 DX.57 kg H DX 4.13 DX.63 kg H DX 4.53 DX.69 kg H SX 3.15 SX.47 kg H SX 2.95 SX.44 kg H SX 3.35 SX.5 kg H SX 3.74 SX.57 kg H SX 4.13 SX.63 kg H SX 4.53 SX.69 kg H HRc 58-6 H DX 3.15 DX.32 kg HRc 58-6 H DX 3.15 DX.9 kg HRc 58-6 H DX 3.15 DX.47 kg HRc (3.54) R 6 (.24) (.35) 9 12 (.47) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.52 kg H DX 3.35 DX.59 kg H DX 3.74 DX.67 kg H DX 4.13 DX.74 kg H DX 4.53 DX.81 kg H SX 3.15 SX.56 kg H SX 2.95 SX.52 kg H SX 3.35 SX.59 kg H SX 3.74 SX.67 kg H SX 4.13 SX.74 kg H SX 4.53 SX.81 kg H DX 3.15 DX.56 kg 7 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 177

20 ROLLERI TYPE Punches Hämmerle-Bystronic ROLLERI TYPE Punches Hämmerle-Bystronic H (5.51) 59 (2.32) 28 (1.1) R 1 (.39) (.33) H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX 2.35 kg H DX 3.35 DX 2.69 kg H DX 3.74 DX 3.2 kg H DX 4.13 DX 3.3 kg H DX 4.53 DX 3.7 kg H SX 3.15 SX 2.52 kg H SX 2.95 SX 2.35 kg H SX 3.35 SX 2.69 kg H SX 3.74 SX 3.2 kg H SX 4.13 SX 3.3 kg H SX 4.53 SX 3.7 kg 6 H (5.51) 45 (1.77) 19 (.75) R 2 (.79) (.33) 6 H (5.51) 45 (1.77) 19 (.75) 85 R 1 (.39) (.33) 6 H kn/m max. 975 kn/m max. 975 kn/m max. 25 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX 1.84 kg H DX 3.35 DX 2.1 kg H DX 3.74 DX 2.37 kg H DX 4.13 DX 2.5 kg H DX 4.53 DX 2.89 kg H SX 3.15 SX 1.97 kg H SX 2.95 SX 1.84 kg H SX 3.35 SX 2.1 kg H SX 3.74 SX 2.37 kg H SX 4.13 SX 2.5 kg H SX 4.53 SX 2.89 kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX 1.84 kg H DX 3.35 DX 2.1 kg H DX 3.74 DX 2.37 kg H DX 4.13 DX 2.3 kg H DX 4.53 DX 2.89 kg H SX 3.15 SX 1.97 kg H SX 2.95 SX 1.84 kg H SX 3.35 SX 2.1 kg H SX 3.74 SX 2.37 kg H SX 4.13 SX 2.3 kg H SX 4.53 SX 2.89 kg 42Cr: N/mm 2 H DX 3.15 DX 2.52 kg 42Cr: N/mm 2 H DX 3.15 DX 1.97 kg 42Cr: N/mm 2 H DX 3.15 DX 1.97 kg 42Cr: N/mm 2 1 (5.51) 22 (.87) 85 R 1 (.39) (.91) 6 H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.95 kg H DX 3.35 DX 1.9 kg H DX 3.74 DX 1.22 kg H DX 4.13 DX 1.35 kg H DX 4.53 DX 1.5 kg H SX 3.15 SX 1.2 kg H SX 2.95 SX.95 kg H SX 3.35 SX 1.9 kg H SX 3.74 SX 1.22 kg H SX 4.13 SX 1.35 kg H SX 4.53 SX 1.5 kg H DX 3.15 DX 1.2 kg H (5.51) 45 (1.77) 19 (.75) R 3 (.118) (.33) 42Cr: N/mm 2 6 H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX 1.86 kg H DX 3.35 DX 2.12 kg H DX 3.74 DX 2.39 kg H DX 4.13 DX 2.6 kg H DX 4.53 DX 2.92 kg H SX 3.15 SX 1.99 kg H SX 2.95 SX 1.86 kg H SX 3.35 SX 2.12 kg H SX 3.74 SX 2.39 kg H SX 4.13 SX 2.6 kg H SX 4.53 SX 2.92 kg H DX 3.15 DX 1.99 kg H (5.51) 45 (1.77) 19 (.75) (.8) (.33) 6 H (7.48) (1.22) (.33) ( H kn/m max. 975 kn/m max. 75 kn/m max. 1 kn/m max. 42Cr: N/mm 2 H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX 1.82 kg H DX 3.35 DX 2.8 kg H DX 3.74 DX 2.34 kg H DX 4.13 DX 2.46 kg H DX 4.53 DX 2.86 kg H SX 3.15 SX 1.95 kg H SX 2.95 SX 1.82 kg H SX 3.35 SX 2.8 kg H SX 3.74 SX 2.34 kg H SX 4.13 SX 2.46 kg H SX 4.53 SX 2.86 kg H DX 3.15 DX 1.95 kg 42Cr: N/mm 2 H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX 1.93 kg H DX 3.35 DX 2.21 kg H DX 3.74 DX 2.48 kg H DX 4.13 DX 3.3 kg H DX 4.53 DX 3.4 kg H SX 3.15 SX 2.7 kg H SX 2.95 SX 1.93 kg H SX 3.35 SX 2.21 kg H SX 3.74 SX 2.48 kg H SX 4.13 SX 3.3 kg H SX 4.53 SX 3.4 kg H DX 3.15 DX 2.7 kg 1 (5.51) 16 (.63) 5 R 1 (.39) 6 1 (.4) 1.5 (.41) 42Cr: N/mm 2 6 H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.95 kg H DX 3.35 DX 1.9 kg H DX 3.74 DX 1.22 kg H DX 4.13 DX 1.35 kg H DX 4.53 DX 1.5 kg H SX 3.15 SX 1.2 kg H SX 2.95 SX.95 kg H SX 3.35 SX 1.9 kg H SX 3.74 SX 1.22 kg H SX 4.13 SX 1.35 kg H SX 4.53 SX 1.5 kg H DX 3.15 DX 1.2 kg 7 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 179

21 ROLLERI TYPE Punch holders Hämmerle-Bystronic ROLLERI TYPE Punch holders Hämmerle-Bystronic H (2.68) H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX.83 kg H DX 3.35 DX.94 kg H DX 3.74 DX 1.6 kg H DX 4.13 DX 1.15 kg H DX 4.53 DX 1.3 kg H SX 3.15 SX.89 kg H SX 2.95 SX.83 kg H SX 3.35 SX.94 kg H SX 3.74 SX 1.6 kg H SX 4.13 SX 1.12 kg H SX 4.53 SX 1.3 kg H21.2. H kn/m max. 1 kn/m max. 1 kn/m max. 155 (6.1) H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX 1.71 kg H DX 3.35 DX 1.95 kg H DX 3.74 DX 2. kg H DX 4.13 DX 2. kg H DX 4.53 DX 2.68 kg H SX 3.15 SX 1.83 kg H SX 2.95 SX 1.7 kg H SX 3.35 SX 1.95 kg H SX 3.74 SX 2. kg H SX 4.13 SX 2. kg H SX 4.53 SX 2.68 kg H DX 3.15 DX.89 kg H DX 3.15 DX 1.83 kg 15 (4.13) H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX 1.27 kg H DX 3.35 DX 1.46 kg H DX 3.74 DX 1.64 kg H DX 4.13 DX 1.8 kg H DX 4.53 DX 2. kg H SX 3.15 SX 1.37 kg H SX 2.95 SX 1.27 kg H SX 3.35 SX 1.46 kg H SX 3.74 SX 1.64 kg H SX 4.13 SX 1.8 kg H SX 4.53 SX 2. kg H DX 3.15 DX 1.37 kg H (1.24) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX 3.54 kg H DX 3.35 DX 4.5 kg H DX 3.74 DX 4.55 kg H DX 4.13 DX 5. kg H DX 4.53 DX 5.57 kg H SX 3.15 SX 3.8 kg H SX 2.95 SX 3.54 kg H SX 3.35 SX 4.5 kg H SX 3.74 SX 4.55 kg H SX 4.13 SX 5. kg H SX 4.53 SX 5.57 kg H DX 3.15 DX 3.8 kg H (12.) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H DX 2.95 DX 4.23 kg H DX 3.35 DX 4.83 kg H DX 3.74 DX 5.44 kg H DX 4.13 DX 6.1 kg H DX 4.53 DX 6.64 kg H SX 3.15 SX 4.53 kg H SX 2.95 SX 4.23 kg H SX 3.35 SX 4.83 kg H SX 3.74 SX 5.44 kg H SX 4.13 SX 6.1 kg H SX 4.53 SX 6.64 kg H DX 3.15 DX 4.53 kg H (6.2) (1.24) 6 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg 42Cr: N/mm 2 7 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 18 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 181

22 ROLLERI TYPE Radius Tools Hämmerle-Bystronic ROLLERI TYPE Die holders Hämmerle-Bystronic H ~118 (4.65) R 6 (.23) R 12.5 (.49) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H22.. ~116 (4.57) R 8 (.31) R (.79) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H / H H / H (.31) H kg H kg Model Length Price Weight H kg H kg H / H (.31) H / H H kg H kg H kg H kg H ~13 (4.6) R 18 (.71) 1 kn/m max. H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H kg H / H H H kg H kg H kg H / H H / H (.31) H kg H kg H kg H kg 7 R 45 (1.77) Rolleri Videos find updated and helpful videos at: videos/overview Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 183

23 ROLLERI TYPE Dies Hämmerle-Bystronic ROLLERI TYPE Dies Hämmerle-Bystronic H (3.39) (.) 5 9 (.35) (.73) 28 (1.1) 5 (1.97) 42Cr: N/mm 2 H kg H SX 1.97 SX.71 kg H DX 2.17 DX.71 kg H DX 2.36 DX.75 kg H DX 2.56 DX.75 kg H DX 2.76 DX.75 kg H DX 2.95 DX.85 kg H DX 3.15 DX.85 kg H DX 3.35 DX.85 kg H DX 3.54 DX.94 kg H DX 3.74 DX.94 kg H DX 1.97 DX.71 kg H SX 2.17 SX.71 kg H SX 2.36 SX.75 kg H SX 2.56 SX.75 kg H SX 2.76 SX.75 kg H SX 2.95 SX.85 kg H SX 3.15 SX.85 kg H SX 3.35 SX.85 kg H SX 3.54 SX.94 kg H SX 3.74 SX.94 kg H (3.39) (.28) (.47) 18.5 (.73) 28 (1.1) 5 (1.97) H R 3.5 (.138) 86 (3.39) 21 (.83) 28 (1.1) H kn/m max. 1 kn/m max. 5 kn/m max. 75 kn/m max. 42Cr: N/mm 2 H kg H SX 1.97 SX.84 kg H DX 2.17 DX.84 kg H DX 2.36 DX.9 kg H DX 2.56 DX.9 kg H DX 2.76 DX.9 kg H DX 2.95 DX 1.1 kg H DX 3.15 DX 1.1 kg H DX 3.35 DX 1.1 kg H DX 3.54 DX 1.12 kg H DX 3.74 DX 1.12 kg H DX 1.97 DX.84 kg H SX 2.17 SX.84 kg H SX 2.36 SX.9 kg H SX 2.56 SX.9 kg H SX 2.76 SX.9 kg H SX 2.95 SX 1.1 kg H SX 3.15 SX 1.1 kg H SX 3.35 SX 1.1 kg H SX 3.54 SX 1.12 kg H SX 3.74 SX 1.12 kg H kg H SX 1.97 SX 1.13 kg H DX 2.17 DX 1.13 kg H DX 2.36 DX 1.21 kg H DX 2.56 DX 1.21 kg H DX 2.76 DX 1.21 kg H DX 2.95 DX 1.36 kg H DX 3.15 DX 1.36 kg H DX 3.35 DX 1.36 kg H DX 3.54 DX 1.51 kg H DX 3.74 DX 1.51 kg H DX 1.97 DX 1.13 kg H SX 2.17 SX 1.13 kg H SX 2.36 SX 1.21 kg H SX 2.56 SX 1.21 kg H SX 2.76 SX 1.21 kg H SX 2.95 SX 1.36 kg H SX 3.15 SX 1.36 kg H SX 3.35 SX 1.36 kg H SX 3.54 SX 1.51 kg H SX 3.74 SX 1.51 kg 86 (3.39) R 4 (.16) 39.2 (1.54) 48 (1.89) H kg H SX 1.97 SX 2. kg H DX 2.17 DX 2. kg H DX 2.36 DX 2.13 kg H DX 2.56 DX 2.13 kg H DX 2.76 DX 2.13 kg H DX 2.95 DX 2.39 kg H DX 3.15 DX 2.39 kg H DX 3.35 DX 2.39 kg H DX 3.54 DX 2.66 kg H DX 3.74 DX 2.66 kg H DX 1.97 DX 2. kg H SX 2.17 SX 2. kg H SX 2.36 SX 2.13 kg H SX 2.56 SX 2.13 kg H SX 2.76 SX 2.13 kg H SX 2.95 SX 2.39 kg H SX 3.15 SX 2.39 kg H SX 3.35 SX 2.39 kg H SX 3.54 SX 2.66 kg H SX 3.74 SX 2.66 kg H (3.39) (.39) (.63) 28 (1.1) 42Cr: N/mm 2 H kg H SX 1.97 SX.92 kg H DX 2.17 DX.92 kg H DX 2.36 DX.98 kg H DX 2.56 DX.98 kg H DX 2.76 DX.98 kg H DX 2.95 DX 1.1 kg H DX 3.15 DX 1.1 kg H DX 3.35 DX 1.1 kg H DX 3.54 DX 1.22 kg H DX 3.74 DX 1.22 kg H DX 1.97 DX.92 kg H SX 2.17 SX.92 kg H SX 2.36 SX.98 kg H SX 2.56 SX.98 kg H SX 2.76 SX.98 kg H SX 2.95 SX 1.1 kg H SX 3.15 SX 1.1 kg H SX 3.35 SX 1.1 kg H SX 3.54 SX 1.22 kg H SX 3.74 SX 1.22 kg H (3.39) (.47) (.63) 28 (1.1) H (3.39) R 2 (.79) 2.2 x (.63) 28 (1.1) H kn/m max. 1 kn/m max. 5 kn/m max. 75 kn/m max. 42Cr: N/mm 2 H kg H SX 1.97 SX.9 kg H DX 2.17 DX.9 kg H DX 2.36 DX.96 kg H DX 2.56 DX.96 kg H DX 2.76 DX.96 kg H DX 2.95 DX 1.8 kg H DX 3.15 DX 1.8 kg H DX 3.35 DX 1.8 kg H DX 3.54 DX 1. kg H DX 3.74 DX 1. kg H DX 1.97 DX.9 kg H SX 2.17 SX.9 kg H SX 2.36 SX.96 kg H SX 2.56 SX.96 kg H SX 2.76 SX.96 kg H SX 2.95 SX 1.8 kg H SX 3.15 SX 1.8 kg H SX 3.35 SX 1.8 kg H SX 3.54 SX 1. kg H SX 3.74 SX 1. kg H kg H SX 1.97 SX 1.13 kg H DX 2.17 DX 1.13 kg H DX 2.36 DX 1.21 kg H DX 2.56 DX 1.21 kg H DX 2.76 DX 1.21 kg H DX 2.95 DX 1.36 kg H DX 3.15 DX 1.36 kg H DX 3.35 DX 1.36 kg H DX 3.54 DX 1.51 kg H DX 3.74 DX 1.51 kg H DX 1.97 DX 1.13 kg H SX 2.17 SX 1.13 kg H SX 2.36 SX 1.21 kg H SX 2.56 SX 1.21 kg H SX 2.76 SX 1.21 kg H SX 2.95 SX 1.36 kg H SX 3.15 SX 1.36 kg H SX 3.35 SX 1.36 kg H SX 3.54 SX 1.51 kg H SX 3.74 SX 1.51 kg 86 (3.39) R 2 (.79) 1.7 x (1.1) 34 (1.34) H kg H SX 1.97 SX 1.36 kg H DX 2.17 DX 1.36 kg H DX 2.36 DX 1.45 kg H DX 2.56 DX 1.45 kg H DX 2.76 DX 1.45 kg H DX 2.95 DX 1.63 kg H DX 3.15 DX 1.63 kg H DX 3.35 DX 1.63 kg H DX 3.54 DX 1.81 kg H DX 3.74 DX 1.81 kg H DX 1.97 DX 1.36 kg H SX 2.17 SX 1.36 kg H SX 2.36 SX 1.45 kg H SX 2.56 SX 1.45 kg H SX 2.76 SX 1.45 kg H SX 2.95 SX 1.63 kg H SX 3.15 SX 1.63 kg H SX 3.35 SX 1.63 kg H SX 3.54 SX 1.81 kg H SX 3.74 SX 1.81 kg 7 H R 1 (.39) 86 (3.39) 1.2 x 45 H (3.39) 1.7 x 45 H (3.39) 2.2 x 45 H kn/m max. 1 kn/m max. 5 kn/m max. 25 kn/m max. H kg H kg H kg 1.9 (.43) H SX 1.97 SX.8 kg R 2 (.79) 32.1 (1.26) H SX 1.97 SX 1.63 kg R 3.5 H SX 1.97 SX 1.16 kg 1 (.4) 16 R.6 H DX 2.17 DX.8 kg H DX 2.17 DX 1.63 kg (.138) (.63) H DX 2.17 DX 1.16 kg (.24) 5 (.) H DX 2.36 DX.86 kg H DX 2.36 DX 1.74 kg H DX 2.36 DX 1.24 kg H DX 2.56 DX.86 kg H DX 2.56 DX 1.74 kg H DX 2.56 DX 1.24 kg 19 H DX 2.76 DX.86 kg H DX 2.76 DX 1.74 kg H DX 2.76 DX 1.24 kg (.75) H DX 2.95 DX.96 kg (1.57) H DX 2.95 DX 1.95 kg H DX 2.95 DX 1. kg H DX 3.15 DX.96 kg H DX 3.15 DX 1.95 kg 28 (1.1) H DX 3.15 DX 1. kg (.55) H DX 3.35 DX.96 kg H DX 3.35 DX 1.95 kg H DX 3.35 DX 1. kg 8 (.31) H DX 3.54 DX 1.7 kg H DX 3.54 DX 2.17 kg H DX 3.54 DX 1.55 kg H DX 3.74 DX 1.7 kg H DX 3.74 DX 2.17 kg H DX 3.74 DX 1.55 kg H DX 1.97 DX.8 kg H DX 1.97 DX 1.63 kg H DX 1.97 DX 1.16 kg H SX 2.17 SX.8 kg H SX 2.17 SX 1.63 kg H SX 2.17 SX 1.16 kg H SX 2.36 SX.86 kg H SX 2.36 SX 1.74 kg H SX 2.36 SX 1.24 kg H SX 2.56 SX.86 kg H SX 2.56 SX 1.74 kg H SX 2.56 SX 1.24 kg H SX 2.76 SX.86 kg H SX 2.76 SX 1.74 kg H SX 2.76 SX 1.24 kg H SX 2.95 SX.96 kg H SX 2.95 SX 1.95 kg H SX 2.95 SX 1. kg H SX 3.15 SX.96 kg H SX 3.15 SX 1.95 kg H SX 3.15 SX 1. kg H SX 3.35 SX.96 kg H SX 3.35 SX 1.95 kg H SX 3.35 SX 1. kg H SX 3.54 SX 1.7 kg H SX 3.54 SX 2.17 kg H SX 3.54 SX 1.55 kg 42Cr: N/mm 2 H SX 3.74 SX 1.7 kg H SX 3.74 SX 2.17 kg H SX 3.74 SX 1.55 kg 42Cr: N/mm 2 86 (3.39) (.28) 7 H kg H SX 1.97 SX.8 kg H DX 2.17 DX.8 kg H DX 2.36 DX.86 kg H DX 2.56 DX.86 kg H DX 2.76 DX.86 kg H DX 2.95 DX.96 kg H DX 3.15 DX.96 kg H DX 3.35 DX.96 kg H DX 3.54 DX 1.7 kg H DX 3.74 DX 1.7 kg H DX 1.97 DX.8 kg H SX 2.17 SX.8 kg H SX 2.36 SX.86 kg H SX 2.56 SX.86 kg H SX 2.76 SX.86 kg H SX 2.95 SX.96 kg H SX 3.15 SX.96 kg H SX 3.35 SX.96 kg H SX 3.54 SX 1.7 kg H SX 3.74 SX 1.7 kg Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 185

24 ROLLERI TYPE Dies Hämmerle-Bystronic ROLLERI TYPE Dies Hämmerle-Bystronic H (3.39) R 1 (.39) 2.5 x 45 5 (.) 7 (.28) 19 (.75) 8 (.31) 42Cr: N/mm 2 5 kn/m max. H kg H SX 1.97 SX.93 kg H DX 2.17 DX.93 kg H DX 2.36 DX.99 kg H DX 2.56 DX.99 kg H DX 2.76 DX.99 kg H DX 2.95 DX 1.12 kg H DX 3.15 DX 1.12 kg H DX 3.35 DX 1.12 kg H DX 3.54 DX 1.24 kg H DX 3.74 DX 1.24 kg H DX 1.97 DX.93 kg H SX 2.17 SX.93 kg H SX 2.36 SX.99 kg H SX 2.56 SX.99 kg H SX 2.76 SX.99 kg H SX 2.95 SX 1.12 kg H SX 3.15 SX 1.12 kg H SX 3.35 SX 1.12 kg H SX 3.54 SX 1.24 kg H SX 3.74 SX 1.24 kg H R 2.5 (.98) 86 (3.39) 2 x 45 5 (.) 7.5 (.3) 19 (.75) 8 (.31) 42Cr: N/mm 2 5 kn/m max. H kg H SX 1.97 SX.92 kg H DX 2.17 DX.92 kg H DX 2.36 DX.98 kg H DX 2.56 DX.98 kg H DX 2.76 DX.98 kg H DX 2.95 DX 1.11 kg H DX 3.15 DX 1.11 kg H DX 3.35 DX 1.11 kg H DX 3.54 DX 1.23 kg H DX 3.74 DX 1.23 kg H DX 1.97 DX.92 kg H SX 2.17 SX.92 kg H SX 2.36 SX.98 kg H SX 2.56 SX.98 kg H SX 2.76 SX.98 kg H SX 2.95 SX 1.11 kg H SX 3.15 SX 1.11 kg H SX 3.35 SX 1.11 kg H SX 3.54 SX 1.23 kg H SX 3.74 SX 1.23 kg H (4.72) R 8 (.315) 9 (3.54) 122 (4.8) 15 kn/m max. H kg H (3.39) R 3 (.118) 3.2 x (1.1) H kn/m max. 5 kn/m max. H kg R (.47) H SX 1.97 SX 1.33 kg (.59) 11.5 (.45) H DX 2.17 DX 1.33 kg H DX 2.36 DX 1.42 kg H DX 2.56 DX 1.42 kg H DX 2.76 DX 1.42 kg 8 (.31) H DX 2.95 DX 1.59 kg 28 (1.1) 8 (.31) H DX 3.15 DX 1.59 kg H DX 3.35 DX 1.59 kg H DX 3.54 DX 1.77 kg H DX 3.74 DX 1.77 kg H DX 1.97 DX 1.33 kg H SX 2.17 SX 1.33 kg H SX 2.36 SX 1.42 kg H SX 2.56 SX 1.42 kg H SX 2.76 SX 1.42 kg H SX 2.95 SX 1.59 kg H SX 3.15 SX 1.59 kg H SX 3.35 SX 1.59 kg H SX 3.54 SX 1.77 kg H SX 3.74 SX 1.77 kg 86 (3.39) 3.2 x 45 H kg H SX 1.97 SX 1.32 kg H DX 2.17 DX 1.32 kg H DX 2.36 DX 1.41 kg H DX 2.56 DX 1.41 kg H DX 2.76 DX 1.41 kg H DX 2.95 DX 1.58 kg H DX 3.15 DX 1.58 kg H DX 3.35 DX 1.58 kg H DX 3.54 DX 1.76 kg H DX 3.74 DX 1.76 kg H DX 1.97 DX 1.32 kg H SX 2.17 SX 1.32 kg H SX 2.36 SX 1.41 kg H SX 2.56 SX 1.41 kg H SX 2.76 SX 1.41 kg H SX 2.95 SX 1.58 kg H SX 3.15 SX 1.58 kg H SX 3.35 SX 1.58 kg H SX 3.54 SX 1.76 kg H SX 3.74 SX 1.76 kg H (4.72) R 8 (.315) 11 (4.33) 4 (5.67) 15 kn/m max. H kg 7 H (.4) R 2 (.79) 5 (.5) 86 (3.39) (.28) (.55) 8 (.31) 42Cr: N/mm 2 H kg H SX 1.97 SX.81 kg H DX 2.17 DX.81 kg H DX 2.36 DX.86 kg H DX 2.56 DX.86 kg H DX 2.76 DX.86 kg H DX 2.95 DX.97 kg H DX 3.15 DX.97 kg H DX 3.35 DX.97 kg H DX 3.54 DX 1.8 kg H DX 3.74 DX 1.8 kg H DX 1.97 DX.81 kg H SX 2.17 SX.81 kg H SX 2.36 SX.86 kg H SX 2.56 SX.86 kg H SX 2.76 SX.86 kg H SX 2.95 SX.97 kg H SX 3.15 SX.97 kg H SX 3.35 SX.97 kg H SX 3.54 SX 1.8 kg H SX 3.74 SX 1.8 kg H kn/m max. 15 kn/m max. 86 (3.39) R 8 (.315) 6 (2.36) 75 (2.95) H kg H SX 1.97 SX 2.82 kg H DX 2.17 DX 2.82 kg H DX 2.36 DX 3.1 kg H DX 2.56 DX 3.1 kg H DX 2.76 DX 3.1 kg H DX 2.95 DX 3.38 kg H DX 3.15 DX 3.38 kg H DX 3.35 DX 3.38 kg H DX 3.54 DX 3.76 kg H DX 3.74 DX 3.76 kg H DX 1.97 DX 2.82 kg H SX 2.17 SX 2.82 kg H SX 2.36 SX 3.1 kg H SX 2.56 SX 3.1 kg H SX 2.76 SX 3.1 kg H SX 2.95 SX 3.38 kg H SX 3.15 SX 3.38 kg H SX 3.35 SX 3.38 kg H SX 3.54 SX 3.76 kg H SX 3.74 SX 3.76 kg Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 187

25 ROLLERI DIES ROLLA-V Content Explanation Model Model Model Model Model Adjustable Dies 195 Hemming- and Joggle Tools 195 8

26 DIES ROLLA-V DIES ROLLA-V Content Explanation Content Explanation Compatibility Our Advantages Your Convenience RVP Dies (Models 1, 2, 3) are compatible with press brake machines (6 mm / 2.36 in die holder) from: ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Safan, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc. RVS Dies (Models 1, 2, 3) are compatible with press brake machines ( mm /.55 in pins) from: Amada Single V style RVT Dies (Models 1, 2, 3) are compatible with press brake machines (12.7 mm /.5 in / 13 mm /.51 in pins) from: Bystronic, Hämmerle, Beyeler, Edwards, Safan, SMD, Trumpf RVT9 Dies (Models 1, 2, 3) are compatible with press brakes machines (12.7 mm /.5 in pins) from: LVD RVM Dies (Models 2.5, 3, 4) are compatible with all press brake machines (various die holders) all dies are compatible on other press brakes machines with the means of adapter-systems or customized die holders. Material high precision grounded Interchangability guaranteed exact Parallelism avoiding bending marks on the sheet metals minimum borders bending mark free no tool contamination throughout the bending of galvanized sheet metal or aluminum extremely short flanges less tool exchange ideal for diagonal or tapered edges Tool lengths and sectioning Standard (17.32) (17.72) Segmented tools are delivered in complete sets. Single pieces are also available! More lengths and sectionings are possible upon request. 5 mm (19.68 in) mm (7.87 in) Model 1, 4 mm (17.32 in) segmented (7 segments) Model 2, 45 mm (17.72 in) segmented (7 segments) Model 2.5, 47 mm (18.5 in) segmented (6 segments) The raw material is obtained from qualified suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength. Model Material Type Hardness of the material and the tool body Hardness of the operating surfaces after induction hardening Body 1 / 2 / 2.5 / 3 / 4 42CrMo N/mm HRC Inserts 1 Toolox 44 5 N/mm 2 through hardened 44 HRC Inserts 2 / 2.5 / 3 / 4 Toolox N/mm HRC 47 (18.5) Model 3, 455 mm (17.91 in) segmented (5 segments) 8 Specifications for the maximum press force kn/m are indicated as such, 1 t = 1 kn. 455 (17.91) Model 1 Max. recommended thickness =1.5 mm (.6 in) (2. mm /.8 in possible) Model 2 Max. recommended thickness =3. mm (.12 in) (4. mm /.15 in possible) Model 2.5 Max. recommended thickness =5. mm (. in) (6.35 mm /.24 in possible) Model 3 Max. recommended thickness =6.3 mm (.25 in) (8. mm /.31 in possible) Equivalent V size mm (in) 8 (.31) 15 (.59) 28 (1.1) 38 (1.5) Material Thickness mm (in) min. outside flange mm (in) needed press force (kn) max. tool load (kn/m) min. bending angle.7 (.3) 3. (.12) (.4) 3.9 (.15) (.6) 4.2 (.17) (.8) 8.5 (.33) (.12) 9.3 (.37) (.13) 9.3 (.37) (.12) 18.7 (.74) (.16) 18.7 (.74) (.) 18.7 (.74) (.24) 18.7 (.74) (.16) 22.5 (.89) (.24) 22.5 (.89) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 19 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 191

27 DIES ROLLA-V DIES ROLLA-V Model 1 Model 2 RVP (1.12) RVS8-1 RVP65-2 RVS8-2 1 kn/m max. 1 kn/m max. 15 kn/m max. 15 kn/m max. 5 mm in 6.9 kg 4 mm in segmented segmented 6.1 kg 28.5 (1.12) 5 mm in 6.3 kg 4 mm in segmented segmented 5.8 kg 41.5 (1.63) 5 mm in 7.9 kg 45 mm in segmented segmented 7.4 kg 41.5 (1.63) 5 mm in 8.3 kg 45 mm in segmented segmented 7.8 kg 6 (2.36) 42Cr: 11-1 N/mm 2 42Cr: 11-1 N/mm 2 42Cr: 11-1 N/mm 2 42Cr: 11-1 N/mm 2 8 (3.15) 65 (2.56) 8 (3.15) 6 (2.36) 6 (2.36) (.55) (.55) RVT (1.12) RVT9-1 RVT6-2 RVT9-2 1 kn/m max. 1 kn/m max. 15 kn/m max. 15 kn/m max. 5 mm in 5.5 kg 4 mm in segmented segmented 5. kg 28.5 (1.12) 5 mm in 8.5 kg 4 mm in segmented segmented 7.8 kg 41.5 (1.63) 5 mm in 7.9 kg 45 mm in segmented segmented 7.4 kg 41.5 (1.63) 5 mm in 11.3 kg 45 mm in segmented segmented 1.6 kg 55 (2.17) 42Cr: 11-1 N/mm 2 42Cr: 11-1 N/mm 2 42Cr: 11-1 N/mm 2 42Cr: 11-1 N/mm 2 9 (3.54) 6 (2.36) 9 (3.54) 13 (.51) 13 (.51) (.28) (.5) (.28) (.5) RVT1-1 1 (3.94) 28.5 (1.12) 42Cr: 11-1 N/mm 2 RVT1-2 1 kn/m max. 15 kn/m max. 5 mm in 9.4 kg 4 mm in segmented segmented 8.6 kg Ideal for thick material! Making the impossible, possible... 1 (3.94) 41.5 (1.63) 5 mm in 12.4 kg 45 mm in segmented segmented 11.7 kg 42Cr: 11-1 N/mm (.51) 13 (.51) Model 2.5 RVM (2.56) kn/m max. 5 mm in 22. kg 47 mm 18.5 in segmented segmented 21. kg 42Cr: 11-1 N/mm 2 1 (3.94) Rolleri Videos 6 (2.36) Use and application of Rolla-V dies Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 193

28 DIES ROLLA-V DIES ROLLA-V Model 3 Adjustable Dies RVP1-3 1 (3.94) 9 (3.54) 6 (2.36) 25 kn/m max. 5 mm in 28.8 kg 455 mm in segmented segmented 26.2 kg 42Cr: 11-1 N/mm 2 RVM7-3 7 (2.76) 9 (3.54) 25 kn/m max. 5 mm in.6 kg 455 mm in segmented segmented 18.7 kg 42Cr: 11-1 N/mm 2 Possible Die Holders: - 6 mm (2.36 in) - 13 mm (.51 in) pin mm (.5 in) pin mm (.5 in) offset pin Our advantages Your Convenience bending possible up to the thickness of 3 mm (1.18 in) inserts hardened no bending marks adjustable openings RVPV3 = mm ( in) RVHD3 = mm ( in) RVPV4 = mm ( in) bends laser-cut sheet metal without damaging the tool exact inner radius RVPV3 1 (3.94) 42Cr: 11-1 N/mm ( ) 21 (8.27) 25 kn/m max. 5 mm in 5. kg mm 7.87 in. kg RVT1-3 9 (3.54) 25 kn/m max. 5 mm in 3.9 kg 455 mm in segmented segmented 28.5 kg RVHD3 42Cr: 11-1 N/mm 2 RVHD4 35 kn/m max. kn/m max. 5 mm in 98. kg mm 7.87 in 38.1 kg 5 mm in. kg 42Cr: 11-1 N/mm 2 mm 7.87 in 8. kg 42Cr: 11-1 N/mm ( ) ( ) 1 (4.72) 15 (5.91) 1 (3.94) 324 (12.76) 51 (.8) 13 (.51) Model 4 8 Our Advantages Your Convenience The model 4 tools and the adjustable dies are for bending thick material and large radii. Material specifications vary greatly, therefore no specific data can be given. Minimum borders are highly dependant on the squareness of the component. Enlargement and hole distortion will be greatly reduced, however will be influenced depending on the type of material Radius bending is strongly influenced by the elastic return of specific material and flange-size. For advice please contact us! RVM9-4 9 (3.54) 17 (6.69) 85 (3.35) 3 kn/m max. 5 mm in 56.6 kg mm 7.87 in 22.7 kg 42Cr: 11-1 N/mm 2 V-Bending flat inserts Hemming- and Z-Tools Hemming Tool Radius-Bending flat inserts Production according to your specifications Conical Bending flat inserts Joggle Tool Radius-Overbending concave inserts U-Bending V-inserts per piece Price upon request per piece Price upon request Production according to your specifications 42Cr: 11-1 N/mm 2 42Cr: 11-1 N/mm 2 Possible Die Holders: - 6 mm (2.36 in) - 13 mm (.51 in) pin mm (.5 in) pin mm (.5 in) offset pin Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 195

29 ROLLERI CLAMPING SYSTEMS Content Explanation 198 Intermediates 199 Clamps - 1 ROL1-System for Punches Rolleri Type R1 2-3 ROL1-System for Punches Rolleri Type R1 4-5 ROL4-System for Punches Rolleri Type R1 5 W-ROL PN-System for Punches Rolleri Type R2 6 ROL3-System for Punches Rolleri Type R3 and 7 ROL2-System for Dies Rolleri Type R1 8-9 Movable Die Clamps for Dies Rolleri Type R1 9 9

30 ROLLERI CLAMPING SYSTEMS R1 ROLLERI CLAMPING SYSTEMS Content Explanation Intermediates Standard-Clamping for Punches Rolleri Type R1 made of: Tensioning device + intermediate dual sided clamping (KDS-System) horizontal tool exchange see pages horizontal CLAMPING Press Brake Crowning Wedge Intermediate Clamp AD4 9 (3.54) 6 (2.36) 3 (1.18) 31 (1.22) 13 7 (.28) (.51) 6 (.24) 13 (.51) 1 kn/m max. 15 mm 5.91 in 1.8 kg without wedge crowning Punch extension INT1 FISSO 1 (3.94) (1.57) 13 7 (.28) (.51) (1.57) (.55) 1 kn/m max. 15 mm 5.91 in 4. kg without wedge crowning Punch extension INT1 1 (3.94) (1.57) 13 7 (.28) (.51) (1.57) (.55) 1 kn/m max. 15 mm 5.91 in 3.5 kg Wedge crown ROL1 Clamping for Punches Rolleri Type R1 vertical tool exchange can be used without modifying Punches Rolleri Type R1 safety guard including selectable intermediates manual and pneumatic models available see pages 2-3 ROL1 Clamping vertical for Punches Rolleri Type R1 vertical vertical tool exchange modification necessary: Punches Rolleri Type R1 are equipped with spring-loaded balls safety guard including selectable intermediates manual, pneumatic and hydraulic models available dual sided clamping (KDS-System) see pages 4-5 ROL4 Clamping for Punches Rolleri Type R1 horizontal tool exchange can be used without modifying Punches Rolleri Type R1 safety guard including selectable intermediates manual and hydraulic models available dual sided clamping integrated see pages 5 horizontal Punch Rolleri Type R1 W-ROL PN Clamping for Punches Rolleri Type R2 vertical tool exchange with vertical ROL1-System and QuickLock-System Punches with Safety-Pins are inserted horizontal safety guard pneumatic model available only see page 6 ROL3 Clamping for Punches Rolleri Type R3/ vertical or horizontal tool exchange custom manufacturing safety guard hydraulic model available only see page 7 ROL2 Clamping vertical for Dies Rolleri Type R1 manual, pneumatic and hydraulic models available see pages 8-9 Movable Die Clamps for Dies Rolleri Type R1 manual model available only see page 9 horizontal horizontal INT1-1 (3.94) 13 (.51) (.79) (1.57) 53 (2.9) (.55) INT1 1 kn/m max. 1 kn/m max (.28) (.51) 1 (3.94) (1.57) (1.57) (.55) INT15- INT15 1 kn/m max. INT1--HD 16 kn/m max. INT1-HD 16 kn/m max. 15 (5.91) (1.57) 13 7 (.28) (.51) (1.57) (.55) 15 mm 5.91 in 5.2 kg 15 mm 5.91 in 4.5 kg Wedge crown 1 (4.72) (1.57) 53 (2.9) 27 (1.6) 15 (5.91) 13 (.79) (.51) (1.57) 53 (2.9) (.55) 1 kn/m max. 15 mm 5.91 in 5.9 kg 15 mm 5.91 in 5.2 kg 15 mm 5.91 in 4.5 kg 13 (.79) 13 7 (.28) (.51) (.51) 42Cr: N/mm 2 42Cr: N/mm 2 Wedge crown Wedge crown Intermediates available upon request also in L=7 mm (2.76 in). Wedge crown Heavy Duty 1 (4.72) (1.57) (1.57) 27 (1.6) 15 mm 5.91 in 8. kg Wedge crown Wedge crown Heavy Duty Please ask for delivery time! 1 kg = 2. Pounds (lb) = Ounzes (oz) 1 mm = 3.94 Inch (in) =.33 Feet (ft) s Please note that delivery time depends on your location. 199

31 R1 ROLLERI CLAMPING SYSTEMS R1 ROLLERI CLAMPING SYSTEMS Clamps Clamps Our Advantages Your Convenience Rapid Clamping Systems allow a fast horizontal tool exchange Plastic Pressure Strip improves the clamping especially with short tool pieces. needed clamps Length of press brake 4 pieces 835 mm (32.87 in) 6 pieces 125 mm (49.21 in) 11 pieces 21 mm (82.68 in) pieces 26 mm (12.36 in) 16 pieces 31 mm (122.5 in) 21 pieces 41 mm ( in) KDS per piece.5 kg includes a tensioning device without intermediates Fe37: N/mm 2 Intermediate Crowning Wedge ST5 / ST5R / STG5 17 (.67) 11 (.43) ST5 ST5R STG5.7 kg.5 kg.7 kg ST6 / ST6R / STG6 17 (.67) 11 (.43) ST6 ST6R STG6.8 kg.85 kg.8 kg L=15 mm (5.91 in) L=15 mm (5.91 in) Fe37: N/mm 2 Fe37: N/mm 2 1 (3.94) 15 (5.91) 1 (3.94) 15 (5.91) ST5 ST5R STG5 ST6 ST6R STG6 KDS 5 (1.97) 5 (1.97) 5 (1.97) (.59) 15 (.59) 15 (.59) 15 Plastic Pressure Strip 6 (2.36) 6 (2.36) 6 (2.36) (.59) 15 (.59) 15 (.59) 15 Plastic Pressure Strip STL6 / STL6R / STLG6 Compatible Intermediates on page 199 STL6 STL6R STLG6 1. kg.8 kg 1. kg STX6 / STX6R / STXG6 STX6 STX6R STXG6.85 kg.5 kg 1. kg ROL1 CLAMP3 manual hydraulic pneumatic Intermediate Crowning Wedge horizontal Model ROL1 CLAMP3 manual with Intermediate INT1 INT1 INT15 INT1 FISSO INT1- ROL1 CLAMP3 manual without Intermediate 9 17 (.67) 11 (.43) STL6 1 (3.94) 15 (5.91) STL6R STLG6 L=15 mm (5.91 in) L=15 mm (5.91 in) 17 (.67) Fe37: N/mm 2 11 (.43) Fe37: N/mm 2 STX6 1 (3.94) 15 (5.91) STX6R STXG6 Clamp Example of manual model Compatible for Standard Punches Rolleri Type R1 horizontal horizontal Model ROL1 CLAMP3 hydraulic Model ROL1 CLAMP3 pneumatic with Intermediate INT1 INT1 INT15 INT1 FISSO INT1- with Intermediate INT1 INT15 L=15 mm (5.91 in) horizontal tool exchange including selectable intermediates 6 (2.36) 6 (2.36) 6 (2.36) (.67) 17 (.67) 17 (.67) 17 Plastic Pressure Strip 6 (2.36) 6 (2.36) 6 (2.36) (.61) 15.5 (.61) 15.5 (.61) 15.5 Plastic Pressure Strip Rolleri Videos Application of Clamping System ROL1 CLAMP3: videos/rol1-clamp3 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 1

32 R1 ROLLERI CLAMPING SYSTEMS R1 ROLLERI CLAMPING SYSTEMS ROL1-System for Punches Rolleri Type R1 ROL1-System for Punches Rolleri Type R1 the newest innovation from our Research and Development Department fast vertical tool exchange for all Punches Rolleri Type R1 can be used without modifying Punches Rolleri Type R1 safe and fast tool exchange ROL1 manual Model ROL1 manual with Intermediate INT1 INT1 INT15 INT1 FISSO significant savings on your setup costs no falling out of tools vertical L=15 mm (5.91 in) vertical tool exchange including selectable intermediates available in manual and pneumatic models Mounting: Simply from the bottom into the housing, tighten DONE! Disassembly: Untighten, gently lift tool and remove downwards. Easy to mount on your press brake. A conversion of the press brake is not necessary. For Press Brake Machines and Punches Rolleri Type R1: (ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Darley, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Safan, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.) The ROL1-System is suited for Standard-Punches. There are no modifications necessary! ROL1 pneumatic s Please note that delivery time varies according to your location. vertical Model ROL1 pneumatic with Intermediate INT1 INT1 INT15 INT1 FISSO L=15 mm (5.91 in) vertical tool exchange including selectable intermediates 9 Pneumatic connection Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 2 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 3

33 R1 ROLLERI CLAMPING SYSTEMS R1 ROLLERI CLAMPING SYSTEMS ROL1-System for Punches Rolleri Type R1 ROL1-System for Punches Rolleri Type R1 In order to use the ROL1 System, the punches are modified and equipped with spring-loaded balls. ROL1 can be used on all press brakes with standard tang intermediates of Rolleri Type R1. Our Advantages Your Convenience Intermediate Crowning Wedge Clamp ROL1 HYD CLAMP1 hydraulic Model ROL1 HYD CLAMP1 with Intermediate INT1 INT1 INT15 INT1 FISSO INT1- L=15 mm (5.91 in) vertical tool exchange including selectable intermediates vertical ROL1 KDS Model ROL1 KDS with Intermediate INT1 INT1 INT15 INT1 FISSO INT1- with Clamp1 vertical with Clamp3 horizontal L=15 mm vertical tool exchange including selectable intermediates vertical clamping of tools is possible on press brakes thanks to a row of spring-loaded balls which are also used as safety guards to prevent the falling out of tools. complete mechanic functioning fast clamping system for press brake machines. Productivity and Versatility of the press brake machines will be increased. Significant reduction in the set-up times when changing tools The system was designed on a press brake machine setup, that allows a maximal distance of 7 mm from the correlating clamping systems (upper and lower). The minimal number of spring-loaded balls in the clamping system should be considered, if the distance is larger than 7 mm. The minimal amount of spring-loaded balls,depends on the weight and the length of each tool. Detailed information about intermediates on page 199 Punch with spring-loaded balls ROL1 CLAMP1 manual Model ROL1 CLAMP1 ROL1 CLAMP1 without Intermediate with Intermediate INT1 INT1 INT15 INT1 FISSO INT1- L=15 mm (5.91 in) vertical tool exchange including selectable intermediates vertical ROL1 PN CLAMP1 pneumatic Model ROL1 PN CLAMP1 with Intermediate INT1 INT15 L=15 mm (5.91 in) vertical tool exchange including selectable intermediates vertical ROL4-System for Punches Rolleri Type R1 ROL4 manual Model ROL4 manual with Intermediate INT1 INT1 INT15 INT1 FISSO L=15 mm (5.91 in) horizontal tool exchange including selectable intermediates integrated KDS-System horizontal ROL4 hydraulic Model ROL4 hydraulic with Intermediate INT1 INT1 INT15 INT1 FISSO INT1- L=15 mm (5.91 in) horizontal tool exchange including selectable intermediates integrated KDS-System horizontal 9 Mounting example Intermediate INT1 Clamp ROL1 CLAMP1 Punch Rolleri Type R1 with spring-loaded balls Rolleri Videos Application of Clamping Systems ROL1 CLAMP1: videos/rol1-clamp1 Rolleri Videos Application of hydraulic clamping ROL4 rol4-hydraulic-clamping The ROL4-System is suitable for Standard-Punches Rolleri Type R1. There are no modifications necessary! Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 4 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 5

34 R2 ROLLERI CLAMPING SYSTEMS W-ROL PN for Punches Rolleri Type R2 W-ROL PN pneumatic 515 mm.28 in 26.8 kg/m vertical Our Advantages Your Convenience vertical tool exchange of punches with: - ROL1-System - QuickLock-System Horizontal tool exchange of punches with safety pins significanly more efficient bending productivity R3/ ROLLERI CLAMPING SYSTEMS ROL3-System for Punches Rolleri Type R3 and ROL3 HYD hydraulic vertical horizontal 5 mm in Our Advantages Your Convenience can be used on press brake machines with different tang types custom manufacturing possible upon request significantly more efficient bending productivity Equip your press brake with our ROL3 system in order to use the advantages of a hydraulic clamping system! Examples of ROL3 with various systems (1.57) (1.57) 9 35 (1.38) 35 (1.38) 13 (5.12) 13 (5.12) 79 (3.11) 8 (3.15) for Type Beyeler-RFA for Type Beyeler-RF for Type Beyeler-R for Type Beyeler-S for Type LVD for Type America vertical tool exchange horizontal tool exchange Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 6 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 7

35 R1 ROLLERI CLAMPING SYSTEMS R1 ROLLERI CLAMPING SYSTEMS ROL2-System for Dies Rolleri Type R1 ROL2-System for Dies Rolleri Type R1 Explanations Application The ROL2 System is a system which is used to secure the die into place. It is made up of a special bar (known as ROL2 CLAMP1, L=5 mm / in), which is operated through a centralized lever. The ROL2 System has a built in spring mechanism and the clamp plates ROL2 CLAMP1 are positioned in the inner lining of the system, which can be opened or tightened for the die to be perfectly secured. A special rubber insert inside the clamp plates grants the best positioning for the tools. The press force of the clamp plates is evenly distribuited along the complete length. Therefore short tools are also securely fastened. At a press brake of 3 meters ( in), for example; all dies are secured with 6 simple hand movements. Directly on the die holder with 6 mm / 2.36 in width - use of existing holes for the standard clamp plates (hole distance 1 mm / 3.94 in) - alternatively modifications of the existing threaded holes necessary - system is compatible for press brakes with automatic cowing tables Directly on the die holder with 9 mm / 3.54 in width - use of existing holes for the standard clamp plates (hole distance 1 mm / 3.94 in) - altertively modifications of the existing threaded holes necessary - for the use of dies Rolleri Type R1, two 15 mm /.59 in wide inserts are mounted and ground (securing with pins) - with rubber corners, the use of short tools is possible and are perfectly secured. With Die Holder on the Die Rail - 6 x 55 mm / 2.36 x in die holder, ground and induction hardened. ROL2 manual Clamp incl. Die holder table: 6 mm 2.36 in 38. kg table: 9 mm 3.54 in 58. kg L=175 mm (42.32 in) ROL2 pneumatic Clamp incl. Die holder table: 6 mm 2.36 in 23. kg table: 9 mm 3.54 in 31.7 kg L=175 mm (42.32 in) only Clamp table: 6 mm 2.36 in 4. kg table: 9 mm 3.54 in 4.5 kg L=5 mm (19.68 in) only Clamp table: 6 mm 2.36 in 5. kg table: 9 mm 3.54 in 5.5 kg L=5 mm (19.68 in) ROL2 hydraulic Clamp incl. Die holder table: 6 mm 2.36 in 23. kg table: 9 mm 3.54 in 31.7 kg L=175 mm (42.32 in) only Clamp table: 6 mm 2.36 in 5. kg table: 9 mm 3.54 in 5.5 kg L=5 mm (19.68 in) Our Advantages Your Convenience fast exchange of tools very time saving reduced production costs significantly increased profitability improved competitiveness Movable Die Clamps for Dies Rolleri Type R1 Our Advantages Your Convenience lowerable clamping plate significantly easier exchange of tools, due the possibility of removing the tool by sliding it out and not lifting the tool. Rolleri Videos movable die holders ST5-S: movable-die-holders 9 ST5-S per piece.7 kg Fe37: N/mm 2 5 (1.97) 1 (.4) 16 (.63) 17 (6.69) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 8 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 9

36 ROLLERI ADAPTERS Punch Adapters Bolted Adapters Die Adapter Rails 218 Die Adapters Modification: Wedge Bar / Tail 221 1

37 ROLLERI ADAPTERS Punch Adapters ROLLERI ADAPTERS Punch Adapters AD11 1 (4.72) (1.57) 5 (1.97) (.79) 1 kn/m max. AD22 1 kn/m max. AD13 1 kn/m max. 15 mm 5.91 in 3. kg (.79) 15 mm 5.91 in 3.4 kg 26 (1.2) 15 mm 5.91 in 3. kg Rolleri Type R2 Rolleri Type R3 Beyeler R Rolleri Type EHT 113 (4.45) 46 (1.81) 31 (1.22) 36 (1.42) (.55) (.55) 1 (5.51) 64 (2.52) 8 (.31) 21 (.83) AD 1 (4.72) 17 (.67) (.33) (3.15) 5 (1.97) (.79) 1 kn/m max. 15 mm 5.91 in 3.2 kg Rolleri Type Gasparini (.55) (.55) (1.57) 5 (1.97) (.55) (.55) AD3 113 (4.45) 46 (1.81) 31 (1.22) 36 (1.42) 22 (.86) 1 kn/m max. 15 mm 5.91 in 3.3 kg Rolleri Type R3 Beyeler S AD1 1 (5.51) 62 (2.44) (.55) (.55) (.79) 1 kn/m max. 15 mm 5.91 in 3.4 kg Rolleri Type R3 Beyeler RFA AD15 1 (3.94) 5 (1.97) 18 (.71) 5.5 (.22) 15.5 (.61) 1 kn/m max. 15 mm 5.91 in 4. kg Rolleri Type Ajial- Axial AD kn/m max. 5.9 inch 5.91 in 4. kg Rolleri Type American (.55) (1.57) 5 (1.97) (.55) (.55) AD1 8 (3.15) 3 (1.18) 5 (1.97) (1.57) (.59) 1 kn/m max. Tang A: AD1-A 15 mm 5.91 in 3.1 kg Tang B: AD1-B 15 mm 5.91 in 3.1 kg Tang C: AD1-C 15 mm 5.91 in 3.1 kg Tang D: AD1-D 15 mm 5.91 in 3.1 kg Rolleri Type LVD Tangs LVD 22 (.87) (.51) 13 1 (.39) 5 (.) 17 (.67) Tang A 18 (.71) 15 (.59) Tang B 1 (.39) 22 (.87) 37 (1.46) 25 (.98) 1 (.39) 27 (1.6) 42 (1.65) 35 (1.38) (.79) 3 (1.18) Tang C With adapters you can use the vast amount of Punches Rolleri Type R1! Tang D 1 (.39) AD12 1 (4.72) (1.57) 5 (1.97) 6 18 (.71) (.55) 1 (.39) AD23 1 kn/m max. 1 kn/m max. 15 mm 5.91 in 1.5 kg 15 mm 5.91 in 5. kg Rolleri Type Colgar 25 (.98) Rolleri Type Weinbrenner 2 (5.59) 42 (1.65) 69 (2.72) 31 (1.22) 7 (.28) (.39) 1 (1.57) (.55) 1 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 213

38 ROLLERI ADAPTERS Punch Adapters ROLLERI ADAPTERS Punch Adapters ADX ADX2 E AD LVD Tangs LVD 22 (.87) (.51) 13 1 (.39) 5 (.) 17 (.67) Tang A C A B (1.57) (.55) 6 (2.36) 18 (.71) 15 (.59) D H Tang B 1 (.39) 22 (.87) H2 H1 37 (1.46) 25 (.98) Rolleri Videos 1 kn/m max. 15 mm 5.91 in 3.5 kg Type X Producation according to your specifications AD19-A AD AD (.28) 3.5 (.51) (.) 13 (.51) 8.4 (.33) 1 (.39) 4 (.16) 6 (.24) 21 (.83) 3 (1.18) 9 (3.54) 1 kn/m max. 1 kn/m max. 15 mm 5.91 in 4. kg 15 mm 5.91 in 4. kg (.51) 13 7 (.28) INT1-A (.51) 13 7 (.28) 15 mm 5.91 in 3.5 kg 13 7 (.28) Type X 3.5 (.51) Rolleri Type R1 15 mm 5.91 in 3.5 kg Rolleri Type R2 (.) Rolleri Type R2 Producation according to your specifications 1 kn/m max. Tang A: AD LVD-A 15 mm 5.91 in 3.6 kg Tang B: AD LVD-B 15 mm 5.91 in 3.8 kg Tang C: AD LVD-C 15 mm 5.91 in 4. kg Tang D: AD LVD-D 15 mm 5.91 in 4. kg Rolleri Type LVD Rolleri Type R2 1 (.39) 27 (1.6) 42 (1.65) Bolted Adapters AW, P bolted-adapters 35 (1.38) (.79) 3 (1.18) Tang C Tang D 1 (.39) AD28 13 (.51) 8.4 (.33) 8 (.31) 21 (.83) 7 (.28) (.39) 1 18 (.71) 26 (1.2) 6 (2.36) 6 (2.36) 19 (.75) 25 (.98) 6 (2.36) 64 (2.52) 42 (1.65) 3 (1.18) 9 (3.54) 3 (1.18) 67 (2.64) 127 (5.) 7 (2.76) 17 (4.21) 15 mm 5.91 in 6. kg Rolleri Type R1 Rolleri Type LVD Pneumatic Adapters see page 6 1 kn/m max. 15 mm 5.91 in 5. kg Rolleri Type EHT Rolleri Type R2 1 kn/m max. 15 mm 5.91 in 4.5 kg Rolleri Type Weinbrenner Rolleri Type R2 INT8-1 E C A B (1.57) (.55) D H [8 (3.15)/1(3.94)] INT1-A / INT1-A (1.57) INT1--A (.51) 13 (.79) (1.57) 1 (3.94) / 1 (4.72) 3 (1.18) (1.57) 1 (4.72) 3 (1.18) 1 kn/m max. 835 mm in 25. kg 415 mm in 12.5 kg 1 kn/m max. INT1-A 15 mm 5.91 in 5.2 kg suitable Models: - Manual system (ST6, STL6, STX6 etc.), see page - Fast Clamping (ROL1 Clamp3), see page 1 - Pneumatic system only on INT1-A (ROL1 Clamp3 PN), see page 1 - Hydraulic system (ROL1 Clamp3 HYD), see page 1 horizontal 1 kn/m max. 15 mm 5.91 in 6. kg suitable Models: - Manual system (ST6, STL6, STX6 etc.), see page - Fast Clamping (ROL1 Clamp3), see page 1 horizontal INT67-79 E C A B (1.57) (.55) D H [67 (2.64)/79 (3.11)] INT1-N (Newton) (1.57) (1.57) (.55) 15.8 (.62) (.12) 3.1 (.22) (.75) (.55) 1 (3.94) 3 (1.18) INT1-A (American) (1.57) 119 (4.69) 1 kn/m max. 835 mm in.5 kg 415 mm in 1. kg 1 kn/m max. suitable Models: - Manual system (ST6, STL6, STX6 etc.), see page - Fast Clamping (ROL1 Clamp3), see page 1 - Hydraulic system (ROL1 Clamp3 HYD), see page 1 horizontal 1 kn/m max. 15 mm 5.91 in 3.5 kg suitable Models: - Manual system (ST6, STL6, STX6 etc.), see page - Fast Clamping (ROL1 Clamp3), see page 1 - Hydraulic system (ROL1 Clamp3 HYD), see page 1 horizontal 1 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 2 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 215

39 ROLLERI ADAPTERS Bolted Adapters ROLLERI ADAPTERS Bolted Adapters AW11 (.79) (.55).5 (1.59) Do you prefer our QuickLock or ROL1- System? Contact us now! 1 kn/m max. 835 mm in 3. kg 415 mm in 1.5 kg 85 mm in segmented segmented 2.9 kg Rolleri Type R2 AW3 22 (.87) (.55) 46 (1.81) 1 kn/m max. 835 mm in 9. kg 415 mm in 4.5 kg 85 mm in segmented segmented 8.7 kg Rolleri Type R3 Beyeler S AW13 26 (1.2) (.55) 64 (2.52) 1 kn/m max. AW 1 kn/m max. 835 mm in 12.6 kg (.79) 835 mm in 8. kg 415 mm in 6.3 kg 415 mm in 4. kg 85 mm segmented in segmented Rolleri Type EHT 12.1 kg (.55) 42 (1.65) 85 mm segmented in segmented 7.7 kg Rolleri Type Gasparini AW1 (.79) (.55) 62 (2.44) 1 kn/m max. AW12 1 kn/m max. 835 mm in 1. kg 22 (.87) 835 mm in 7. kg 415 mm in 5. kg 415 mm in 3.5 kg 85 mm segmented in segmented Rolleri Type R3 Beyeler RFA 9.6 kg (.55) 46 (1.81) 85 mm segmented in segmented Rolleri Type Colgar 6.7 kg AW (.61) (.55) 18 (.71) 1 kn/m max. AWC16 1 kn/m max. 835 mm in 4.6 kg 18 (.71) 835 mm in 5. kg 415 mm in 2.3 kg 415 mm in 2.5 kg 85 mm segmented in segmented 4.4 kg Rolleri Type Ajial- Axial (.55) (.79) 85 mm segmented in segmented Rolleri Type Colly 4.8 kg AW1-A (.51) 13 (.55) (.) 5 22 (.87) 1 kn/m max. AW1-B 1 kn/m max. 835 mm in 4.5 kg 18 (.71) 835 mm in 6.3 kg 415 mm in 2.2 kg 415 mm in 3.1 kg 85 mm segmented in segmented Rolleri Type LVD A 4.3 kg (.55) 85 mm segmented in segmented Rolleri Type LVD B 6. kg AWC (.61) 13.5 (.53) (.55) (.79) 1 kn/m max. 835 mm in 4.8 kg 415 mm in 2.4 kg 85 mm in segmented segmented 4.6 kg Rolleri Type Colly AWX E C A B (.55) D 1 kn/m max. 835 mm in 3. kg 415 mm in 1.5 kg 85 mm in segmented segmented 3. kg Individual 1 AW1-C 25 (.98) (.55) 37 (1.46) 1 kn/m max. 835 mm in 9.7 kg 415 mm in 4.8 kg 85 mm in segmented segmented 9.4 kg Rolleri Type LVD C AW1-D 35 (1.38) (.55) 42 (1.65) 1 kn/m max. 835 mm in 11.5 kg 415 mm in 5.7 kg 85 mm in segmented segmented 11.1 kg Rolleri Type LVD D INT35 35 (1.38) D 15 (.59) E C A B (.55) 1 kn/m max. INT35-A 1 kn/m max. 835 mm in 4. kg mm in 5. kg 525 mm.67 in 2.5 kg mm in 2.5 kg 85 mm segmented in segmented 3.9 kg mm segmented in segmented 4.8 kg Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 217

40 ROLLERI ADAPTERS Die Adapter Rails ROLLERI ADAPTERS Die Adapters C /S / C 25/S / C 3/S / C /S TC /S / TC 25/S / TC 3/S / TC /S 27 (1.6) 12 (.47) M8 35 (1.38).5 (.81) M8 AD6 3 (1.18) 13.1 (.52).5 (.81) 1 kn/m max. 1 mm in 12. kg 5 mm in 6. kg Rolleri Type R1 Rolleri Type R2/R3 AD6 Example of Application 6 (2.36) 97 (3.82) 13.1 (.52) 6 (2.36) 6 (2.36) Model Length (mm) Length (in) Weight C /S kg C 25/S kg C 3/S kg C /S kg C 15/R Model Length (mm) Length (in) Weight TC /S 21 mm kg TC 25/S 26 mm kg TC 3/S 31 mm kg TC /S 41 mm kg C 15/RS AD5 6 (2.36) 13.1 (.52).5 (.81) 1 kn/m max. 1 mm in 26.1 kg 5 mm in 13. kg Rolleri Type R1 Rolleri Type R2/R3 AD5 Example of Application 6 (2.36) 3 (1.18) 1 (.39) 6 (2.36) 8 (3.15) M8 3 (1.18) 1 (.39) 6 (2.36) 8 (3.15) 2 (.8) M8 AD7 1 kn/m max. 835 mm in 18. kg 415 mm in 9. kg AD7 Example of Application Model Length (mm) Length (in) Weight C 15/R kg C 15/R/C kg Model Length (mm) Length (in) Weight C 15/RS 15 mm kg C 15/RS/C 5 mm kg C 15-9 (1.57) (.79) 13 (.51) 6 (2.36) Rolleri Type R2/R (1.38) 15 (.59) AD (.49) (.47) 12 (.47) 6 (2.36) 1 kn/m max. 835 mm in 28.5 kg 415 mm in.2 kg Rolleri Type EHT 12, AD24 Example of Application 6 (2.36) 9 (3.54) 1 (4.72) 72 (2.83) 42 (1.65) Model Length (mm) Length (in) Weight C kg C 15-9/C kg 27 (1.6) 55 (2.17) 15 (.59) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 219

41 ROLLERI ADAPTERS Die Adapters ROLLERI ADAPTERS Die Adapters AD (.52) 1 kn/m max. 5 mm in 7.5 kg Rolleri Type EHT Rolleri Type R2/R3 AD25 Example of Application AD (.52) 1 kn/m max. 5 mm in 4.5 kg Rolleri Type Weinbrenner Rolleri Type R2/R3 AD27 Example of Application (1.57) 21 (.83) (1.57) 21 (.83) 55 (2.17) 35 (1.38) AD (1.57) 19 (.75) 7 (.28) 12.7 (.5) 6 (2.36) 1 kn/m max. 835 mm in 17. kg 415 mm in 8.5 kg Rolleri Type LVD AD Example of Application AD kn/m max. 835 mm in 18. kg 415 mm in 9. kg Type American AD17 Example of Application AD (1.18) 48 (1.89) 13.1 (.52).5 (.81) 1 kn/m max. 1 mm in 15. kg 5 mm in 7.5 kg Rolleri Type LVD Rolleri Type R2/R3 AD Example of Application AD kn/m max. 835 mm in 18. kg 415 mm in 9. kg Type American AD18 Example of Application 7 (.28) 12.7 (.5) Modification: Wedge Bar / Tail 1 AD26 72 (2.83) 42 (1.65) (.49) (.47) 37 (1.46) 12 (.47) 6 (2.36) 35 (1.38) 25 (.98) 1 kn/m max. 835 mm in 23. kg 415 mm in 11.4 kg Rolleri Type Weinbrenner AD26 Example of Application In order to use the dies Rolleri Type R1 on other press brake machines, a 1 mm (.39 in) groove is milled to insert a ground wedge bar / tail into the die. Wedge Bar / Tail (W x H) System 13 x 3 mm (.51 x 1.18 in) Rolleri Type R2 and R3 (Bystronic-Beyeler/Safan/Trumpf etc.) 55 x 55 mm (2.17 x 2.17 in) Rolleri Type EHT 12.7 x 29 mm (.5 x 1. in) Rolleri Type LVD 35 x 55 mm (1.38 x 2.17 in) Rolleri Type Weinbrenner Specific information and prizes are found in the Rolleri Service / Modifications Chapter (see page 252) Mounting example H 6 (2.36) W Die Rolleri Type R1 Groove Wedge Bar / Tail Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 2 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 221

42 ROLLERI MARK FREE BENDING Prevention of Bending Marks 224 Bending Foil Holder/Tensioner 224 Bending Foil 225 PU-Holder and PU-Upholstery Synthetic Dies

43 ROLLERI MARK FREE BENDING ROLLERI MARK FREE BENDING Prevention of Bending Marks One of the challenges of bending is to prevent the profile of having bending marks, such as; scratches and abrasions on the surface areas. Especially of Profile made of: Stainless Steel Aluminium painted metal panels It is often the case of a line building from the contact of the sheet metal with the die. This is the cause of friction of sheet metal on small radius. In order to prevent this markings, the following solutions are possible: Bending Foil PU-Upholstery Plastic Dies enlarged opening radius on special T-Dies R.8 (.31) R 4 (.16) Our Advantages Your Convenience Prevention of scratches and abrasions on bent sheet metals No post-processing necessary, therefore time and cost saving No contamination of bended pieces increases the product quality easy handling T-Dies (TR) with an enlarged opening radius for the prevention of bending marks see pages 54-55, 6-61 Bending Foil Our Advantages Your Convenience easy handling can be used flexibly Prevention of Bending Marks decrease of post-processing of bent parts no contamination of the material increased product quality ROLFILM Bending Foil: Practical, easy and economic! Model Thickness Thickness (mm) (in) Width (mm) Width (in) Length (m) Length (in) Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Bending Foil - Holder / Tensioner CT Standard T-Die with small opening radius causes visible bending marks T-Die TR with an enlarged opening radius reduces visibly the bending marks per piece 6. kg Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolfilm Rolleri Videos mark free bending: mark-free-bending Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 225

44 ROLLERI MARK FREE BENDING PU-Holders and PU-Upholstery ROLLERI MARK FREE BENDING PU-Holders and PU-Upholstery MPG25 MPG5 MPG75 Mounting example 25 (.98) 835 mm in 18.5 kg 415 mm in 9.2 kg 5 (1.97) 835 mm in 44. kg 415 mm in 22. kg 77 (3.3) 835 mm in 46. kg 415 mm in 22.5 kg 25 (.98) 6 (2.36) 5 (1.97) 6 (2.36) 6 (2.36) 96 (3.78) GM 25x25 GM 5x5 GM 75x5 GMF 75x5x GMF 25x25x1 GMF 5x5x25 MPG1 12 (4.2) 1 (3.94) 96 (3.78) 46 (1.81) 1 (3.94) PU-Upholstery PU-Holder (.79) 6 (2.36) 125 (4.92) (.79) 2 (.8) H B groove groove bar / tail Also mountable on other press brakes! 25 (.98) 835 mm in.6 kg 415 mm in.3 kg 5 (1.97) 835 mm in 2.5 kg 415 mm in 1.2 kg 75 (2.95) 835 mm in 3.5 kg 415 mm in 1.7 kg 75 (2.95) 25 (.98) 5 (1.97) 5 (1.97) 45 (1.77) (.79) 5 (1.97) 25 (.98) 5 (1.97) ø1 (.39) 25 (.98) ø 25 (.98) 5 (1.97) 46 (1.81) PSTCON GM 1x5 6 (2.36) 155 (6.1) 1 (3.94) 16 (.63) PU-Upholstery are suitable for radius- and U-profile bendings, etc. GMF 1x5x 835 mm in 3. kg 1 (3.94) 415 mm in 2.2 kg 11 5 (1.97) 6 (2.36) (.79) 5 (1.97) B 835 mm in 3.5 kg 415 mm in 1.7 kg polyurethane polyurethane polyurethane polyurethane 835 mm in.6 kg 415 mm in.3 kg 835 mm in 2.5 kg 415 mm in 1.2 kg 835 mm in 55. kg 415 mm in 27.5 kg polyurethane polyurethane cover plate Model A (mm) A (in) R (mm) R (in) Weight PSTCON kg PSTCON kg PSTCON kg PSTCON kg Mounting example 835 mm in 5. kg 415 mm in 2.5 kg polyurethane polyurethane A 15 (.59) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 227

45 ROLLERI MARK FREE BENDING ROLLERI MARK FREE BENDING Synthetic Dies Our Advantages Your Convenience easy Handling faster and easier exchange of plastic dies prevention of bending marks decrease of post-processing of bent pieces no contamination of the materials increased product quality TN8. 75 (2.95) 18 (.71) 15 (.59) (.55) 24 (.94) 6 (2.36) INS... 1 kn/m max. kn/m max. 835 mm in 15. kg 835 mm in.3 kg 415 mm in 7.5 kg V 415 mm in.15 kg Rolleri Type R1 Mounting example Synthetic dies will be adjusted into the housing and secured with bolted screws. bolted screws 5 (.) (.79) α (.55) 24 (.94) Model α V (mm) V (in) INS INS INS INS INS INS synthetic die housing Model α V (mm) V (in) INS INS INS INS INS Synthetic Dies TN (3.11) 18 (.71) 3 (1.18) 11 (.43) 19 (.75) 38 (1.5) 3 (1.18) 5 (1.97) 6 (2.36) 1 kn/m max. INS3... kn/m max. 835 mm in 25. kg 835 mm in.5 kg 415 mm in 12.5 kg V 415 mm in.25 kg Rolleri Type R1 12 (.47) 31 (1.22) 19 (.75) α 3 (1.18) 38 (1.5) Model α V (mm) V (in) INS INS INS INS INS INS INS INS INS INS INS INS INS s Please note that delivery time varies according to your location. Model α V (mm) V (in) INS INS INS INS INS INS INS INS INS INS INS TN8. 75 (2.95) 18 (.71) 19 (.75) (.79) 35 (1.38) 6 (2.36) INS... 1 kn/m max. kn/m max. 1 kn/m max. kn/m max. 835 mm in 19. kg 835 mm in. kg 835 mm in 12. kg 835 mm in. kg 415 mm in 9.5 kg V 415 mm in. kg (.79) 415 mm in 6. kg V 415 mm in. kg Rolleri Type R1 5 (.) 24 (.94) α (.79) 35 (1.38) Model α V (mm) V (in) INS INS INS INS INS INS INS INS INS INS Model α V (mm) V (in) INS INS INS INS INS INS INS TMN (3.74) (.79) 19 (.75) 35 (1.38) 13 (.51) 6 (2.36) Rolleri Type R2/R3 INS... 5 (.) 24 (.94) α (.79) 35 (1.38) Model α V (mm) V (in) INS INS INS INS INS INS INS INS INS INS Model α V (mm) V (in) INS INS INS INS INS INS INS Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 229

46 ROLLERI SPECIAL AND HEAVY DUTY TOOLS Explanation of Special Tools 232 Explanation of Heavy Duty Tools 233 Heavy Duty Tools Examples of Special Tools Dies with Rollers ROL6-System 242 Panelling Tools 242 BLACKFIRE

47 ROLLERI SPECIAL AND HEAVY DUTY TOOLS Special Solutions Our Advantages Your Convenience in-house construction and production (no reseller or dealer) competent consulting client specific developments tracking of every tool possible, with a unique serial number on every article after the quality control check precision grinding (tolerance of +/-.1mm) guaranteed tool reproduction exact parallelism bending tests upon request Special Tooling for: Z-Profiles Hat-Profiles Trapezoidal Profiles Pressed contours Foldings Hinges Radii Beads Special Profiles etc. ROLLERI SPECIAL AND HEAVY DUTY TOOLS Solutions for heavy tasks Our Advantages Your Convenience The bending of materials with extreme high resistance, (Hardox, Weldox, etc.), has developed into an important task. The Heavy Duty tools of Rolleri are built and finished for these challenges. Tools that have a press force up to kn/m, offer you many production possibility. Material The raw material is obtained from qualified suppliers which compose the chemical formulas according to international standards. Therefore, guaranteeing high resilience and tensile strength. Material Type Mechanical resistance of the material Hardness of the operating surfaces Hardness of the material and the tool body and the tool body after induction hardening 42CrMo N/mm HRC 54-6 HRC C N/mm HRC 54-6 HRC N/mm HRC 54-6 HRC Specifications for the maximum press force kn/m are indicated as such, 1 t = 1 kn. Our many years of experience in the area of special and heavy duty tooling, along with our own developing department, guarantee you functional and economic solutions in the bending sector. From the compatible tang to the punch onto the compatible die; we manufacture everything in our own production facilities. Take advantage of the direct contact to the manufacturer and the benefits which come along with it. Contact us now! We are here to help you! 12 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 233

48 ROLLERI SPECIAL AND HEAVY DUTY TOOLS Heavy Duty Tools ROLLERI SPECIAL AND HEAVY DUTY TOOLS Heavy Duty Tools RHD.3 1 (.39) (1.57) (1.57) (1.57) 5 (1.97) RHD.3 HYD RHD.3-25 RHD.3-25 HYD 5 (1.97) 5 mm in 122. kg 45 (1.77) 5 mm in 1. kg 8 (.31) 5 (1.97) RHD.5-25 kn/m max. 25 kn/m max. 42Cr: N/mm2 42Cr: N/mm 2 3 (1.18) 42Cr: N/mm 2 RHD.3-5 mm in 122. kg RHD.3- HYD 5 mm in 1. kg kn/m max. kn/m max : 83 N/mm : 83 N/mm 2 5 (1.97) (1.57) 1 (.39) kn/m max. 1 (4.72) 3 (11.81) 1 (4.72) 3 (11.81) 5 (19.68) 5 (1.97) More Tools for Heavy Duty operations can be found on pages mm in 253. kg RHDP.6 H 44 (1.73) R 25 (.98) 22 (.87) W 6 9 (.35) 25 kn/m max. Model H (mm) H (in) W (mm) W (in) R (mm) R (in) RHDP RHDP RHDP RHDP RHDP RHDP RHDP RHDP RHDP RHDP mm in kn/m max. Model H (mm) H (in) W (mm) W (in) R (mm) R (in) RHDP RHDP RHDP RHDP RHDP RHDP RHDP RHDP RHDP RHDP Cr: N/mm : 83 N/mm 2 1 (4.72) 12 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 235

49 ROLLERI SPECIAL AND HEAVY DUTY TOOLS ROLLERI SPECIAL AND HEAVY DUTY TOOLS Tool examples SPE1 SPE2 SPE9 SPE-P1 Hat-Profiles Z-Profiles C BS A S B SPE3 SPE4 S A C D B S C D B SPE-P2 SPE-P3 A H H α R Trapezoidal Profiles H SPE5 S Hinges SPE6 α R α R ø S ø SPE-P4 Front- and Hemming Tool (Foldings) SPE7 SPE-X 2 (8.66) 3 (1.18) 12 A A Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 237

50 ROLLERI SPECIAL AND HEAVY DUTY TOOLS Tool examples ROLLERI SPECIAL AND HEAVY DUTY TOOLS Dies with Rollers Radii Pressing MR9 MR13 V C V Rollen: C HRC Rollen: C HRC 42Cr: N/mm 2 42Cr: N/mm 2 C 9 (3.54) B 13 (5.12) B Special Profiles Model V (mm) V (in) B (mm) B (in) C (mm) C (in) Length (mm) Length (in) Weight (kg) MR MR MR MR MR MR MR Model V (mm) V (in) B (mm) B (in) C (mm) C (in) Length (mm) Length (in) Weight (kg) MR MR MR MR MR MR MR MR MR MR MR A1 A11 6 (2.36) (.79) 13 (.51) (.79) A13 7 (.27) 12.7 (.5) 19 (.75) 12 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 239

51 ROLLERI SPECIAL AND HEAVY DUTY TOOLS ROLLERI SPECIAL AND HEAVY DUTY TOOLS Dies with Rollers Dies with Rollers Our Advantages Your Convenience increase in wear resistence through rollers induction hardened rollers (approx. 6 HRc) decrease in bending marks decrease in press force easy and economic exchange of rollers AD MR (1.4) (.79) 13 (.51) 6 (2.36) 98 mm 3.86 in Adapter for Rolleri Type R1 MR (13.78) 25 (9.84) kn/m max. 1 mm 3.94 in 28. kg 42Cr: N/mm 2 AD MR13 27 (1.6) 13 (.51) 98 mm 3.86 in Adapter for Rolleri Type R2/R3 AD MR (1.91) 42 (1.65) 13 (.51) 98 mm 3.86 in Adapter for Rolleri Type EHT (7.87) 55 (2.17) 8 (7.87) MR17..8 kn/m max. MR kn/m max. 29 (11.41) (7.87) 4 (16.54) 3 (12.6) 25 (9.84) 8 R 8 (3.15) 12 3 (1.18) 17 (6.69) R 6 (2.362) AD MR (2.3) 45 (1.77) 13 (.51) 98 mm 3.86 in Adapter for Rolleri Type Weinbrenner AD MR (1.6) (.79) 13 (.51) 7 (.28) 12.7 (.5) 98 mm 3.86 in Adapter for Rolleri Type LVD 3 (1.18) 13 (.51) 35 (1.38) 1 mm 3.94 in 19. kg 1 mm 3.94 in 42. kg 42Cr: N/mm 2 42Cr: N/mm 2 8 R (1.575) 25 (.98) 13 (.51) 15 (5.91) Take advantage of our dies with rollers with means of groove bars/tails to use on other press brake machines. 13 (.51) 2 (9.45) Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 2 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 241

52 ROLLERI SPECIAL AND HEAVY DUTY TOOLS ROL6-System ROLLERI SPECIAL AND HEAVY DUTY TOOLS BLACKFIRE Our Advantages Your Convenience ROL6 The Unique Coating Our Advantages Your Convenience various V-Openings: -36 mm ( in) Instructions: - secured manually with steering wheel - driven by gear motor or - CNC-system While using the manual version, the opening is set in place by a turn of the stearing wheel, or with a gear reduction which is attached to the die. The automatic version, on the other hand, is operated by a control panel. The standard system does not come with the CNC-Connection for the press brake. It is available upon request at an additional cost. The base of the ROL6-system is 7 mm (28.35 in) wide, but can also be fitted onto narrow designed tables. There is a adapter available in order to secure the system onto a table with a width of mm (15.75 in). The inserts in the opening radius are exchangeable. The standard version comes with an opening radius of R=1 mm (.39 in). 42Cr: N/mm 2 bending angle kn/m max Rolleri BLACKFIRE is a particular coating of your tools which defines itself by its increased corrosion resistence and special design. The chemical treatment permanently solves the problem of oxidation. The top surface of the metals changes through the phosphate process. It builds phosphate-like crystals, that attach themselves chemically on the substance. This improves the durability of the surface against corrosion. Your equipment will have a long-term lifecycle left unchanged. The glossy black color of BLACKFIRE is compatible with the new technology and that allows a unique and esthetic look which connects well with the advantages of it. You can have the BLACKFIRE treatment on all standard tools with a surcharge of 3%. Please note that the delivery times vary by a BLACKFIRE Treatment. no corrosion better gliding by the exchange of tools appealing design long-life cycle Die weight: approx. 1 ton/m Rolleri Videos Application of various dies ROL6: Panelling Tools Our Advantages Your Convenience in-house construction (no reseller or dealer) production according to your specifications tracking of every tool possible, with a unique serial number on every article after the quality control check. precision grinding (tolerance of +/-.1 mm) exact parallelism use of the best materials, guaranteed high resistance and tensile strength 12 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 243

53 ROLLERI SERVICES / MODIFICATIONS Our Production Department Modified Tangs Special Sectioning 25 Horn Pieces 25 Modifying the V-Opening 25 Radius and Angle Modification 251 Grooves for Dies 251 Grooves and Groove Bars/Tails for Dies 252 Gaps and Windows

54 ROLLERI SERVICES Our Production Department Our Machine Park Our comprehensive machinery with state-of-the-art technology ensures you the highest quality in tools. In addition to the manufactured standard and special tools, we perform all modifications individually according to your requirements. Take advantage the modifications to reduce costs and increase the productivity of your existing tools! ROLLERI SERVICES Our Production Department Hardening The surface areas of the tools are exposed to the highest mechanical stress. Due to the fact that, the whole press force of the press brake machine is focused on small surface of the sheet metal. Therefore the stress is very high on these surfaces. During the bending process of the sheet metal, friction occurs. For more resistance strength the hardening of the surfaces can be increased. The depth of the hardening must be at least 3 mm to avoid deformations. We use the electromagnetic technique also known as induction hardening to the best quality for your money s worth. CNC-Milling With our state-of-the-art milling centers we can do your modification requests fast, precise and with high-quality. Swivel milling heads with high swivel range allows flexible and universal production. This is where, grooves, gaps, and openings are created. Quality Control and Laser Marking After the laser marking, tracking of every tool is possible with a unique serial number on every article. Therefore the tracking of your tools is guaranteed and a new productions with the exact same meausrements (angle, radius, hardening, etc.) is possible. This step is happens after quality control. Individual markings are upon request possible. CNC-Profile Grinding Our CNC-Professional grinding machines guarantee, highest precision ground (tolerance of +/-.1 mm), accurate parallelism and repeatability. Here you can also retrofit induction hardened and core hardened tool pieces. Radius and angle modifications are percisely grounded after your measurements. EDM Wire By using EDM wire, hardened and very tough material can be retrofitted. The process is operated based on a CAD-system which can also process high dimensions such as special shapes. 13 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 247

55 ROLLERI MODIFICATIONS ROLLERI MODIFICATIONS for standard tangs Modified Tangs Rolleri Punches Type R1, R2, and R3 can be used on other press brake machines by modifying the tang. Precision ground (Tolerance of +/-.1 mm) exact parallelism fast, economic, percise Standard Rolleri Type R1 (.51) 13 7 (.28) (.) (.51) 8.4 (.33) 3 (1.18) Fast delivery on these items guaranteed. Please note that delivery terms vary according to your location. for standard tangs Standard Rolleri Type R2 (.) (.33) (.79) OT Modification for: for Amada fast clamping system (.51) 13 7 (.28) 9 chamfer 13 (.51) 8.4 (.33) 3 (1.18) 835 mm in 415 mm in 85 mm in segmented segmented A1 Groove in addition to 8.4 x 3.5 mm (.33 x. in) groove for: pneumatic clamping system (.51) 13 7 (.28) (.) (.1) 13 (.51) 8.4 (.33) 1 (.39) 3 3 (1.18) 22 (.87) 835 mm in 415 mm in 85 mm in segmented segmented Modification examples Type R2 production according to your specifications (.31) 8 6 (.24) (.79) 4 (.16) H production according to your specifications (.47) 12 5 (.) 15 (.59) 3 (.12) 12 (.47) H A6 Groove in addition to 8.4 x 3.5 mm (.33 x. in) groove for: Rolleri Type R3 Bystronic-Beyeler Euro Safan (.51) 13 7 (.28) (.) (.16) 13 (.51) 8.4 (.33) (.55) 3 (1.18) (.24) mm in 415 mm in 85 mm in segmented segmented A7 Groove in addition to 8.4 x 3.5 mm (.33 x. in) groove and shortened tang for: Rolleri Type R3 Bystronic-Beyeler Euro Safan (.51) 13 7 (.28) (.) (.16) 13 (.51) 8.4 (.33) (.55) (.24) 6 3 (1.18) 25 (.98) 835 mm in 415 mm in 85 mm in segmented segmented Take advantage of your existing tools with means of modifications. Standard Rolleri Type R3 A8 Groove Bar/Tail for: hydraulic clamping system Gasparini (.51) 13 7 (.28) (.16) 4 45 (.) 5 15 (.59) 1 (.39) 3 (1.18) 835 mm in 415 mm in 85 mm in segmented segmented A41 older clamping system (.51) 13 7 (.28) 4 (.16) (.24) 6 (.55) 3 (1.18) 835 mm in 415 mm in 85 mm in segmented segmented 45 (1.77) (.55) (.55) (.79) 11 (.43) A42 older clamping system (.51) 13 7 (.28) (.16) 4 (.55) (.24) 6 3 (1.18) 25 (.98) 835 mm in 415 mm in 85 mm in segmented segmented A43 Groove with steel bar for: segmented punches.5 (.57) (.51) 13 7 (.28) (.18) (.39) 3 (1.18) 835 mm in 415 mm in 85 mm in segmented segmented Modification examples Type R3 production according to your specifications 41 (1.61) 1 (.39) (.55) (.79) 11 (.43) production according to your specifications 45 (1.77) 9 (.35) 19 (.75) (.79) 11 (.43) 13 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 249

56 5 (.) 5 (.) 135 (5.31) 245 (9.65) 835 (32.87) 445 (17.52) 23 (9.6) 5 (.) 835 (32.87) 6 (23.62) R B α R B α H H RH ROLLERI MODIFICATIONS ROLLERI MODIFICATIONS Special Sectioning Radius and Angle Modifications Individual sectioning of your punches and dies fast, economic, percise Pro separation cutting causes a decrease in length of approx. 5 mm Individual modifications of your punches and dies fast, economic, percise Special Sectioning of Punches Special Sectioning of Dies Radius Modifications for Punches Radius Modifications for Dies Example of punches production according to your specifications Example of Dies production according to your specifications Radii modification Punch example production according to your specifications Opening Radius modification die example production according to your specifications R 1.2 (.47) R 3. (.118) before before 6 R 1 (.39) before 6 R 3 (.118) after before after Horn Pieces individual horn pieces on punches and dies on one or both sides fast, economic, percise Horn Pieces for Punches Horn Pieces for Dies Angle Modification Punches Angle modification punch example production according to your specifications Angle Modification Dies Angle modification die example production according to your specifications R 1.2 (.47) 88 8 R 3. (.118) Punch example production according to your specifications Die example production according to your specifications 6 R 1 (.39) before 55 R 1 (.39) after before after B R Grooves for Dies Milling of grooves for use on other press brake systems fast, economic, percise Mounting example Modifying the V-Opening individual modification for dies fast, economic, percise Delivery within 3 business days. Upon concorrdance even faster! Die Rolleri Type R1 milled groove Die holder Modifying the V-Opening Example production according to your specifications 1 (.39) 11 (.43) R 1.2 R 1.2 (.47) (.47) Give us a call for more information! A28 Groove for die holder 835 mm in 415 mm in 85 mm in segmented segmented A29 groove production according to your specifications 835 mm in 415 mm in 85 mm in segmented segmented 6 (.24) 15 (.59) H B 13 Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that 25 delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 251

57 ROLLERI MODIFICATIONS ROLLERI MODIFICATIONS Grooves und Groove Bars/Tails for Dies Gaps and Windows For milling of the groove and the insert of a ground groove bar/tail the exact measurement is needed to use on other press brake systems fast, economic, percise Mounting example 6 (2.36) Die Rolleri Type R1 The retrofitting of the tool edges of long parts, short U-profiles and similar fast, economic, percise Milled groove H Groove Bar/Tail B A3 Groove Bars/Tails: 13 x 3 mm (.51 x 1.18 in) for Rolleri Type R2 Rolleri Type R3 835 mm in 415 mm in 85 mm in segmented segmented A31 Groove Bars/Tails: 12 x 29 mm (.47 x 1. in) for Rolleri Type LVD 835 mm in 415 mm in 85 mm in segmented segmented Gaps on Punches Example Punches production according to your specifications Gaps on Dies Example Dies production according to your specifications (.79) 1 (.39) 13 (.51) 19 (.75) A44 45 (1.77) 1 (.39) 55 (2.17) A45 AX 1 (.39) 1 (.39) 7 (.28) 12 (.47) A32 Groove Bars/Tails: 12.7 x 29 mm (.5 x 1. in) for Rolleri Type LVD 835 mm in 415 mm in 85 mm in segmented segmented Groove Bars/Tails: 55 x 55 mm (2.17 x 2.17 in) for Rolleri Type EHT 835 mm in 415 mm in 85 mm in segmented segmented Windows for Punches Example Punches production according to your specifications 1 (.39) H 19 (.75) 7 (.28) 12.7 (.5) Groove Bars/Tails: 35 x 55 mm (1.38 x 2.17 in) for Rolleri Type Weinbrenner 835 mm in 415 mm in 85 mm in segmented segmented individual Groove Bars/Tails for other systems 835 mm in 415 mm in 85 mm in segmented segmented 45 (1.77) 35 (1.38) B For Rolleri BLACKFIRE see page Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 253

58 ROLLERI SHEAR BLADES AND ACCESSORIES Tooling Cabinets Tool Trolley 258 Bending Box 258 Squaring Arms 259 Supporting Arms 26 Back Gauge 26 Shear Blades

59 ROLLERI ACCESSORIES ROLLERI ACCESSORIES Tooling Cabinets Tool Cabinets Our Advantages Your Convenience Protection against contamination and damage Faster access Robust construction Clear and tidy storage Cabinet doors specially designed for lift trucks and truck Adjustable height, zinc-plated shelves Rolleri Videos Tool storage demonstration at: videos/tooling-cabinets ARM 16-4-T / -CV for max. tool length = 16 mm (41.73 in) 85 x 12 x 136 (W x H x D) x x (W x H x D) for tools Rolleri Type R2/R3 approx..8 m / 31.2 m ( in / in) Storage capacity ARM 16-5-T / -CV for max. tool length = 16 mm (41.73 in) 1 x 12 x 136 (W x H x D).94 x x (W x H x D) for tools Rolleri Type R2/R3 approx. 26 m / 41.6 m ( in / in) Storage capacity ARM for max. tool length = 835 mm (32.87 in) 85 x 12 x 15 (W x H x D) x x (W x H x D) ARM for max. tool length = 835 mm (32.87 in) 1 x 12 x 15 (W x H x D).94 x x (W x H x D) for Tools Rolleri Type R1 approx. m (787. in) Storage capacity for Tools Rolleri Type R1 approx. 25 m ( in) Storage capacity Equipment ARM 16-4-T 4 Drawers vertical, on wheels (see CS-2) 8 Shelves for type R2/R3 with 13 mm (.51 in) tangs (see shelves UL-13-4) 8 Shelves for type R2/R3 (see shelves UT-4) Weight 383. kg Equipment ARM 16-5-T 5 Drawers vertical, on wheels (see CS-2) 1 Shelves for type R2/R3 with 13 mm (.51 in) tangs (see shelves UL-13-4) 1 Shelves for type R2/R3 (see shelves UT-4) Weight 447. kg Equipment 4 Drawers vertical, on wheels (see CS-1) 16 Shelves for type R1 with 13 mm (.51 in) tangs (see shelves UC-13-1) 4 Shelves for type R1 with 13 mm (.51 in) tangs (see shelves UL-13-3) Weight 271. kg ARM 16-4 / -CV for max. tool length = 16 mm (41.73 in) 85 x 12 x 136 (W x H x D) x x (W x H x D) for Tools Rolleri Type R2/R3 approx. 26 m / 39 m ( in / in) Storage capacity Equipment 5 Drawers vertical, on wheels (see CS-1) Shelves for type R1 with 13 mm (.51 in) tangs (see shelves UC-13-1) 5 Shelves for type R1 with 13 mm (.51 in) tangs (see shelves UL-13-3) Weight 35. kg ARM 16-5 / -CV for max. tool length = 16 mm (41.73 in) 1 x 12 x 136 (W x H x D).94 x x (W x H x D) for Tools Rolleri Type R2/R3 approx m / 52 m ( in / in) Storage capacity Equipment ARM 16-4-T-CV 4 Drawers vertical, on wheels (see CS-2), incl. 2 Drawers with separators (see CV) 16 Shelves for type R2/R3 with 13 mm (.51 in) tangs (see shelves UC-13-1) 8 Shelves for type R2/R3 (see shelves UT-4) Weight 36. kg UC-Shelves A UT-Shelves B L Model L mm (in) A mm (in) B mm (in) Weight UC (4.92) 13 (.51) 76 (2.99).5 kg UC (9.84) 13 (.51) 232 (9.13) 1. kg UC (4.92) (.79) 76 (2.99).5 kg UC (9.84) (.79) 232 (9.13) 1. kg 2 pieces Model L (mm) L (in) Weight UT kg UT kg UT kg UT kg Equipment ARM 16-5-T-CV 5 Drawers vertical, on wheels (see CS-2), incl. 3 Drawers with separators (see CV) 24 Shelves for type R2/R3 with 13 mm (.51 in) tangs (see shelves UC-13-1) 8 Shelves for type R2/R3 (see shelves UT-4) Weight 5. kg UL-Shelves UV-Shelves B L L Model L mm (in) B mm (in) Weight UL (1.63) 13 (.51) 1.2 kg UL (22.83) 13 (.51) 2.5 kg UL (41.34) 13 (.51) 4.6 kg UL (53.54) 13 (.51) 6. kg UL (1.63) (.79) 1.4 kg UL (22.83) (.79) 3.2 kg UL (41.34) (.79) 5.8 kg UL (53.54) (.79) 7.5 kg Model L (mm) L (in) Weight UV kg UV kg UV kg UV kg enough room for punches with safety pins Equipment ARM Drawers vertical, on wheels (see CS-2) 16 Shelves for type R2/R3 with mm (.79 in) tangs (see shelves UC--2) 4 Shelves for type R2/R3 with mm (.79 in) tangs (see shelves UL--4) Weight 3. kg Equipment ARM Drawers vertical, on wheels (see CS-2) Shelves for type R2/R3 with mm (.79 in) tangs (see shelves UC--2) 5 Shelves for type R2/R3 with mm (.79 in) tangs (see shelves UL--4) Weight. kg CS-Drawers Model T mm (in) L mm (in) Weight CS-1 15 (41.34) 856 (33.7) 22. kg CS (53.54) 1166 (45.91) 25. kg CV-Dividers B Model T mm (in) A mm (in) B mm (in) Weight CV-1 15 (41.34) 58 (22.83) 27 (1.63) 7. kg CV (53.54) 58 (22.83) 58 (22.83) 7. kg Equipment ARM 16-4-CV 4 Drawers vertical, on wheels (see CS-2), incl. 2 Drawers with separators (see CV) Shelves for type R2/R3 with mm (.79 in) tangs (see shelves UC--1) 1 Shelves for type R2/R3 with mm (.79 in) tangs (see shelves UL--4) Weight 351. kg Equipment ARM 16-5-CV 5 Drawers vertical, on wheels (see CS-2), incl. 3 Drawers with separators (see CV) 3 Shelves for type R2/R3 with mm (.79 in) tangs (see shelves UC--1) 1 Shelves for type R2/R3 with mm (.79 in) tangs (see shelves UL--4) Weight 49. kg L T A T Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 257

60 ROLLERI ACCESSORIES Tool Trolley Our Advantages Your Convenience faster access robust construction clear and tidy storage visibility of tools ROLLERI ACCESSORIES Squaring Arms Our Advantages Your Convenience easy and fast securing percise and flexible adjustability adjustable angle stop mountable on all dies ideal for long, and thin sheet metals Rolleri Videos Magnetic Squaring Arms : videos/squaring-arms H=15 (59.84) Tool Trolleys Model Content Tool System Weight A Trolley 3 Shelves for R1 tools 18. kg T Trolley 21 Shelves for R2 tools 175. kg B Trolley 21 Shelves for R3 tools 135. kg MSA magnetic MSA.D (right) per piece 1.4 kg MSA.S (left) per piece 1.4 kg Rolleri Videos Secure storage and mobility: videos/tool-trolley D=116 (45.67) W=16 (41.73) Bending Box Bending Box per piece 1.6 kg AS per piece 3.5 kg Give us a call for more information! Please ask for 1 kg = 2. Pounds (lb) = Ounzes (oz) s Please note that delivery time! 1 mm = 3.94 Inch (in) =.33 Feet (ft) delivery time depends on your location. 259

61 ROLLERI ACCESSORIES Supporting Arms and Back Gauge ROLLERI SHEAR BLADES Shear Blades RIF-Supporting Arm RP-Back Gauge Our Advantages Your Convenience Model Length mm (in) Weight RIF5 5 (19.68) 7. kg RIF1 1 (39.37) 12. kg Model RP5A RP5B Weight 8. kg 8. kg own production custom production RIF15 15 (59.5) 17. kg depending on the cutting material high quality Materials 4-, 2- or 1-sharp with threaded holes or bilateral reduction hardened according to your specifications and request for secure support for high volume sheet metals greater surface guarantees a trouble-free support for sheet metals easy handling ensures for the correct posistioning of tools on the press brake and secures herewith the exact border distance. fast and exact repeatability easy handling available sizes mm (in) 5 x 1 (1.97 x.39) 55 x 12 (2.17 x.47) 6 x 12 (2.36 x.47) 65 x 13 (2.56 x.51) 7 x 13 (2.76 x.51) 5 x 11 (1.97 x.43) 55 x 13 (2.17 x.51) 6 x 13 (2.36 x.51) 65 x (2.56 x.55) 7 x (2.76 x.55) 5 x 12 (1.97 x.47) 55 x (2.17 x.55) 6 x (2.36 x.55) 65 x 15 (2.56 x.59) 7 x 15 (2.76 x.59) 5 x 13 (1.97 x.51) 55 x 15 (2.17 x.59) 6 x 15 (2.36 x.59) 65 x 16 (2.56 x.63) 7 x 16 (2.76 x.63) 5 x (1.97 x.55) 55 x 16 (2.17 x.63) 6 x 16 (2.36 x.63) 65 x 17 (2.56 x.67) 7 x 17 (2.76 x.67) 5 x 15 (1.97 x.59) 55 x 17 (2.17 x.67) 6 x 17 (2.36 x.67) 65 x 18 (2.56 x.71) 7 x 18 (2.76 x.71) 55 x 18 (2.17 x.71) 6 x 18 (2.36 x.71) 65 x 19 (2.56 x.75) 7 x 19 (2.76 x.75) AS FIX per piece 3. kg 55 x 19 (2.17 x.75) 6 x 19 (2.36 x.75) 65 x (2.56 x.79) 7 x (2.76 x.79) 55 x (2.17 x.79) 6 x (2.36 x.79) available sizes mm (in) 75 x 15 (2.95 x.59) 8 x 16 (3.15 x.63) 85 x 18 (3.35 x.71) 9 x (3.54 x.79) 1 x (3.94 x.79) 75 x 16 (2.95 x.63) 8 x 18 (3.15 x.71) 85 x 19 (3.35 x.75) 9 x 21 (3.54 x.83) 1 x 22 (3.94 x.87) 75 x 17 (2.95 x.67) 8 x 19 (3.15 x.75) 85 x (3.35 x.79) 9 x 22 (3.54 x.87) 1 x 25 (3.94 x.98) 75 x 18 (2.95 x.71) 8 x (3.15 x.79) 85 x 21 (3.35 x.83) 9 x 23 (3.54 x.91) 1 x 26 (3.94 x 1.2) 75 x 19 (2.95 x.75) 8 x 21 (3.15 x.83) 85 x 22 (3.35 x.87) 9 x 24 (3.54 x.94) 1 x 27 (3.94 x 1.6) 75 x (2.95 x.79) 8 x 22 (3.15 x.87) 85 x 23 (3.35 x.91) 9 x 25 (3.54 x.98) 1 x 28 (3.94 x 1.1) 75 x 21 (2.95 x.83) 8 x 23 (3.15 x.91) 85 x 24 (3.35 x.94) 1 x 29 (3.94 x 1.) 75 x 22 (2.95 x.87) 8 x 24 (3.15 x.94) 85 x 25 (3.35 x.98) 1 x 3 (3.94 x 1.18) 75 x 23 (2.95 x.91) 8 x 25 (3.15 x.98) 75 x 24 (2.95 x.94) Shear Blades 75 x 25 (2.95 x.98) We manufacture in our company over more than years shear blades. High-quality steels are finished according to your specifications. Please provide us with the following information: What material are you cutting with your machines: Steel, Stainless Steel, Aluminium, etc. How thick is the material in diameter? How often to you use your cutting machine? (per hour, day, week) How many upper and lower shear blades are needed? α α α α New production and retrofitting service: fast, economic, precise! α 4-sharp 2-sharp 1-sharp α 26 Please ask for delivery time! 1 kg = 2. Pounds (lb) = Ounzes (oz) 1 mm = 3.94 Inch (in) =.33 Feet (ft) s Please note that delivery time depends on your location. 261

62 ROLLERI Professional Bending Press Force Table The press force table is based on the press force caliper and is very useful to those who deal with sheet metal profiles. It can assist you from the projection of profiles, to technical construction, to the buying of tools, and to the finished profile from the press brake machine. In the first left column the thickness of the sheet metal is noted as (S). In the three first lines you can find the die width (V), the minimum boarder (B), and the ideal inner profile radius (Ri). By crossing the thickness with the die width, you will find the necessary press force per meter. Furthermore, depicted are the span of 5 different die widths. The correction factors are found below in the table. S = Thickness V = Die Width B = Min. Boarder Ri = Inner Profile Radius S B 9 Ri V Visit us on our website and take advantage of: drawings 1:1 format available extra information and tips helpful videos and application examples easy website browsing S (mm) 4 N/mm V B,5,7,8 1, 1,3 1,5 2, 2,5 3,2 4,4 5, 6,5 8, 1, 12, 15,, 25, 37, Ri INOX stainless steel R 7 N/mm 2 Ton x AL aluminium R N/mm 2 Ton x (R = tensile strength) F kn/m Copyright: The use of Rolleri Publications and national adoptions of Rolleri Publications is subject to the user s acceptance of Rolleri s terms of use and conditions of copyright for Rolleri publications, as set out below. All Rolleri Publications and national adoptions thereof are protected by copyright. Therefore and unless otherwise specified, no part of an Rolleri Publication or a national adoption thereof may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, microfilm, and scanning, without permission in writing from the publisher. 3 B x 1.6 R= N/mm 2 r x.8 Al 6 B x B x 1. R=4 N/mm 2 r x 1. Fe 1 B x.9 15 B x.7 R=7 N/mm 2 r x 1.4 INOX

63 Rolleri S.p.A. Via Artigiani Cabina 29 Vigolzone (PC) Italia Tel Fax sales@rolleri.it Web