drylin R Round Shaft Guide Systems

Transcription

1 Round Shaf Guide Sysems Lubicaion-fee Coosion-esisan Wea-esisan Insensiive o di Low ficion Exemely quie opeaion Low weigh 975

2 Round Shaf Guide Sysems Poduc Oveview linea plain beaings ae based on exemely wea-esisan polymes specially developed fo he linea echnology. The dimensions ae compaible wih sandad ball beaings. The special geomey guaanees eliabiliy even in exeme envionmens. open o closed Solid polyme beaing Linea beaing open o closed Lubicaion-fee s made of high-pefomance iglidu J guaanee opimum unning popeies and long sevice life eaing in iglidu X fo exeme envionmenal condiions (chemicals/empeaue) Robus and coosion-esisan 1 ad-anodised aluminium shafs ( shaf/suppoed shaf), seel and sainless seel shafs shafs, page Linea adape and complee housing in anodised aluminium 3 s made of high-pefomance iglidu J/J200/X Many vesions available s made of iglidu high-pefomance polymes, sandad and pecise beaing cleaance, linea adape, complee housing in vaious shapes, solid plasic beaing eaing uni and Floaing beaing uni s and Pessfi eaings Low ficion, opimised wea qualiy Space saving, low weigh igh chemical esisance page 984 Linea Plain eaings luminium/sainl. seel adape wih line made of iglidu J Solid plasic beaing made of iglidu J, dimensions coesponding o he sandad fo eciculaing ball beaings Closed o spli Self-aligning page 996 ouse eaing and Floaing ouse eaing 100 % lubicaion-fee Easy o fi igh saic load Replaceable lines Spli housing fo quick beaing eplacemen available page 1006 ousing beaing Flange eaing Easy o fi Round o squae ype Sandad design o andem flange page 1017 dvanages: 100 % lubicaion-fee Dimensionally inechangeable wih sandad eciculaing ball beaings Lage vaiey of choice in housing shapes Shafs, shaf end suppos and accessoies available 8 diffeen shaf maeials Replaceable line V sainless seel housing available When no o use hem? When lile insallaion space is available dylin N, page 925, dylin W, page 939 When wis-poecion is equied fo single-axis dylin T, page 903, dylin N, page 925 Open Linea Plain eaings Fo suppoed shafs Round o mouned design djusable opions Opional floaing beaing ype fo quick assembly page º +250º 40º 90º Quad lock Closed and open design Quad block housing wih 4 linea beaings Lubicaion-fee Cleanoom ceificaed IP Faunhofe page 902 Fee of oxins ROS 2002/95/EC ESD compaible (elecosaic dischage) page 902 Tempeaue Sandad Tempeaue Sainless Seel Opional floaing beaing fo quick assembly page Moe infomaion igu s Gmb Gemany Phone Fax -334 info@igus.de 977

3 pplicaion Examples Typical secos of indusy and applicaion aeas giculual Vehicle manufacuing Medical chiecual Packaging ec. Impove echnology and educe coss 170 exciing examples online Maeial daa Geneal popeies Uni iglidu J iglidu X iglidu J200 Tesing mehod Densiy g/cm Colou yellow black dak gey Max. moisue absopion a +23 C/50 %. h. % weigh DIN Max. moisue absopion % weigh Coefficien of sliding ficion, dynamic agains seel µ pv value, max. (dy) MPa m/s Mechanical popeies Modulus of elasiciy MPa 2,400 8,100 2,800 DIN Tensile sengh a +20 C MPa DIN Compessive sengh MPa Max. ecommended suface pessue (+20 C) MPa Shoe D hadness DIN Physical and hemal popeies Max. long em applicaion empeaue C Max. sho em applicaion empeaue C Min. applicaion empeaue C Themal conduciviy W/m K STM C 177 Coefficien of hemal expansion (a +23 C) K DIN Elecical popeies Specific volume esisance Ωcm > < 10 5 > 10 8 DIN IEC 93 Suface esisance Ω > < 10 3 > 10 8 DIN Table 01: Maeial daa 1, Paing-off ginde F [N]/Ø [mm] Speed v [m/s] Canileveed shaf Canileveed shaf Suppoed shaf Suppoed shaf seel/sainless seel had anodised aluminium seel/sainless seel had anodised aluminium Concee cuing machine Filling-shoe mechanism in a compacion uni Diagam 01: compaison of he pemissible dynamic loads a equivalen diamees 978 Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 979

4 benefis fo use in dus, lin, and coase di as dylin. The Seies L1 Low-cleaance pess-fi beaings Linea Plain eaings paened design of he beaing suface using individual slide The seies L1 plain beaings ae composed of he The dylin sandad pads conneced by hin film secions, povides pefomance iglidu L100 beaing maeial, an exemely wea-esisan beaings consis of a eplace- benefis fo diy envionmens. Di, even if i becomes we plasic compound. They ae sub-divided ino a pess-fi aea able iglidu J, J200 o X line, on he shaf, is wiped away by he individual glide pads and and a gliding ange. They can be used boh as individual ha is manufacued o be a is moved ino he open aeas. The unning secions of he pa and as pess-fi beaing in linea plain beaings of he mechanical fi ino an anodised dylin beaings hen slide on he shaf ha has been cleaed seies. The gliding ange is composed of individual aluminium adape. The axial of all conaminans. cossbas which ae linked o each ohe by hin film bidges. secuing of he line is achieved by a snap ing goove. These film bidges on he one hand peven he divegence linea plain beaings, made fom solid polyme, Spli Linea eaings of he individual cossbas, bu on he ohe compensae igh wea esisance ae dimensionally equivalen o sandad ball beaings. They pplicaions ha ae on he edge of echnical feasibiliy all expansions of he beaing hough heaing o moisue. Low coefficien of ficion ae made eniely ou of wea esisan iglidu J, J200 o o in exemely hash envionmens ofen equie fequen This sepaaion enables he almos cleaance-fee design Vibaion dampening X maeial and can offe echnical advanages in addiion eplacemen of he linea beaings. In many cases, dylin of he beaings, as hee is no clamping of he shaf. The igh saic compessive sengh o he clea pice advanage. Thus, applicaions in which can give a muliple incease in he sevice life. oweve, cylinde-shaped pess-fi aea is also visually vey disinc Good chemical esisance machine pas ae pimaily sainless seel, i. e. food and in exeme applicaions, eplacemen of he beaings is fom he gliding ange. The singula funcion of his ange, Resisan o di filling equipmen, ae well suied fo he use of solid plasic necessay, even wih dylin. dylin linea beaings can which shows a disinc cleaance compaed o he shaf, Suiable fo sof and ough shafs beaings. n addiional weigh-saving is also easily obained. povide consideable cos educions in such cases as only is o fix he bushing fimly in he housing. oh ypes ae designed fo fiing in housings wih ou he polyme beaing line has o be eplaced. This ofen ecommended oleances. The beaings ae secued by ciclips in he same way as wih ball beaings. The naow means a educion of moe han 90 % in eplacemen pa coss. The iglidu J line can be easily eplaced, while a Compessive sengh Coefficiens of sliding ficion design of he 02 design seies, is pessfi o bonded ino ball-beaing cage canno. The ange of spli housings offes iglidu plain beaings ae homogeneously filled wih solid Plain beaings of he L1 seies ae designed fo dy opeai- he housing. Sandad commecial adhesives can be used even geae cos savings. Shafs no longe need o be lubicans. In his way, lubicans canno be emoved, even on agains seel. The bes esuls ae aained wih suface fo his pupose. emoved fom he housing. The wo shells of he housing a high loads. The maeial iglidu L100 allows an aveage finishes of 0.8 µm. The coefficiens of sliding ficion educes can be opened vey easily. The high pefomance polyme saic suface pessue pf 70 MPa. oweve, only half of wih inceasing load. Typical values in dy opeaion ae 0.2 Di, Dus, Fibes beaing inside is spli and can easily be pulled off he shaf. he beaing suface can cay loads and his is aken ino o 0.3. u he value can be highe wih less suiable shafs. n impoan feaue of all he linea plain beaings is hei Clip a new beaing line ove he shaf, pu he wo housing accoun in he calculaion. oleance of di and abasive paicles. Fo mos convenional beaing, he use of wipe o seals is ecommended o peven di accumulaion. No ohe sysem has he design halves ogehe, insall done! Wih his poduc line of spli dylin beaings, insallaion s can be educed o a minimum. Suface Speeds Tempeaues Tempeaues affec he compessive sengh, he wea The following able shows possible suface speeds of and he secuing of he beaing in he housing. In all ess, L1 beaings. a secue pessfi could be held up o a empeaue of iglidu L100 Roaing Oscillaing Linea Coninuous (m/s) Sho em (m/s) C. highe empeaues, an addiional secuing of he beaing is ecommended. Wih effecice secuing, L1 plain beaings could also be used a empeaues ove 100 C. Table 02: Maximum unning speed fo iglidu L100 iglidu L100 pplicaion empeaues Minimum 30 C Max. long em +100 C Max. sho em +190 C The all e iglidu J The specialis iglidu J200 The exeme iglidu X Table 03: Tempeaue limis fo iglidu L100 Poenial shaf maeial all shaf maeials luminium, had anodised hadened sainless seel pplicaion empeaue 50 o +90 C 50 o +90 C 100 o +250 C es coeff. of ficion wih seel shaf luminium, had anodised seel had chomed Maximum life luminium, had anodised luminium, had anodised hadened sainless seel 980 Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 981

5 Design Sandads Insallaion insucions Self-ligning eaings linea plain beaings in he 03 design seies offe gea advanages in applicaions wih paallel shafs. y hei geomey, hey ae able o compensae fo alignmen and paallelism eos and should be used on he shaf locaed fuhes fom he dive mechanism. The design povides a spheical aea on he ouside diamee of he aluminium adape fo self-alignmen. Reducions in load capaciy ae pevened, since he shaf always lies on he oal pojeced suface. Due o he even load disibuion ove he enie beaing, edge loads ae no possible wih he self-aligning dylin linea beaings. Even in unfavouable condiions, he load is suppoed by he enie pojeced suface. In ode o compensae fo paallelism eos beween wo shafs, he oue diamee is designed o be smalle han he housing boe diamee by mm (depending on he size). Wih he use of mouned O-ings, hese beaings have an elasic beaing sea. The cleaance beween he beaing and housing allows fo he maximum compensaion of possible shaf mis-alignmen. The self-aligning beaings ae supplied had anodised. These sufaces guaanee he highes wea esisance if he aluminium beaing moves in he housing duing compensaion adjusmens. Eccenic Foces To ensue successful use of mainenance-fee dylin linea beaings, i is necessay o follow ceain ecommendaions: If he disance beween he diving foce poin and he fixed beaings is moe han wice he beaing spacing (2:1 ule), a saic ficion value of 0.25 can heoeically esul in jamming on he guides. This pinciple applies egadless of he value of he load o dive foce. The ficion poduc is always elaed o he fixed beaings. The geae he disance beween he dive and guide beaings, he highe he degee of wea and equied dive foce. Failue o obseve he 2:1 ule duing a use of linea slide beaings can esul in uneven moion o even sysem blockage. Such siuaions can ofen be emedied wih elaively simple modificaions. If you have any quesions on design and/o assembly, please conac ou applicaion enginees. Floaing Fixed 2 x 1x s ae designed fo compleely lubicaion-fee opeaion. The dimensions of he especive linea adape and housing mee he sandad fo eciculaing ball beaings. Duing assembly, please noe he following insallaion insucions: Design ips fo dylin linea plain beaings: The values fo Fmax. elae o he pefomance of he iglidu lines made of high-pefomance plasics and canno be used as only selecion ool fo he calculaion of an applicaion. The maximum caying capaciy of he enie beaing sysem depends on he geomey, housing shape, he housing maeial, he connecion including he scews used and equies a sepaae inspecion. Fo a deailed analysis, please use ou online configuao a s: JUM, XUM, JUMO, XUMO, JUI, JUIO Inelocking clip-on in he housing boe xial secuing is given by a snap ing goove Toque poecion hough engagemen of he safey pin in hole ø z Pessfi eaings: WLM, WLFM Insallaion by pessing ino he 7 housing boe ssembly-insucions, page 76 Recommended shaf-oleance: h6 h10 Roughness [Ra]: Guide shafs, /suppoed shafs, page 1037 Recommended mouning hole: 7 Linea Plain eaing RJUM-01/03, TJUM-01/03, RJM, RJMP, RJ260(U)M02, Pessfi beaing WLM, WLFM Linea Plain eaings: RJUM-01, RJUM-11, RJUM-ES, TJUM-01, RJUM-03, TJUM-03, RJUI-01, RJUI-03, TJUI-01, TJUI-03 Secued by DIN 471 o 472 ciclips, meic ypes (no included in ) Solid Plasic eaings: RJM, RJI-01 Fasening wih ciclips accoding o DIN 471 o 472 (no included in ) The E9 inne oleance applies only afe he pessfi Diagam 03: The 2:1 ule Solid Plasic eaings: RJMP Easy assembly by sof pessfi Secued by DIN 471 o 472 ciclips, meic ypes (no included in ) Linea Plain eaings: RJUM-02 Secued by pessfiing in seel housing boe 7 o aluminium housing boe K7 lenaively, he adape can be glued wih commecially available 2-componen adhesive ino a housing Compac eaing: RJ260 (UM-02) xial saving and pess fi ino housing boe 7 lenaively, he adape can be glued wih commecially available 2-componen adhesive ino a housing Linea Plain eaings: OJUM-01, OJUM-03, OJUI-01, OJUI-03 Secue he beaing wih se scews (no included in ) OJUM-06-LL page 1016 RJUM-06-LL page 1011 Seies RJUM-03/OJUM-03 ±0.5 Diagam 02: y defined insallaion cleaance and exenally mouned O-ings, he self-aligning dylin R beaings of he ype seies 03 can compensae paallelism eos. Spheical dylin adapes can compensae angle eos. ad anodizaion poecs he aluminium adapes agains wea. Seies RJUM-06-LL/OJUM-06-LL ±3.5 Table 04: Compensaion of angle eos Seies RJUM-03/OJUM-03 ±0.1 mm Seies RJUM-06-LL/OJUM-06-LL ±3 mm Table 05: Compensaion of paallelism eos Quad lock: RQ, RG Tandem Design: RT The beaing in he housing is secued using DIN 472 ciclips Linea ousing: RGS The beaing in he housing is secued using DIN 471 ciclips Quad lock: OQ, OG, Linea ousing: OGS, Tandem Design: OT The beaings of he housings ae secued using se scews Pillow lock: RJUM/E/T-05, RJUM-06/-LL, OJUM/E-06/-LL, Flange ousing: FJUM/T-01/02 Quad lock: RG, OG, Tandem Design: RT, OT, Linea ousing: RGS, OGS Mouning scews of he housing DIN Ciclips accoding o DIN Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 983

6 f f Linea Poduc Range Linea Poduc Range Closed, long design z JUM Open, long design Y Y 2:1 z JUMO b1 Sandad b1 Sandad Open Ø < 10 use iglidu JSM sleeve beaings p. 118 Fo suppoed shafs Pa numbe Toleance* b1 z Weigh [g] JUM JUM JUM JUM JUM JUM JUM ,040 +0, ,0 0,8 4,0 18,20 JUM JUM JUM-01-60** Pa numbe Toleance* b1 z Weigh JUMO JUMO JUMO JUMO JUMO JUMO JUMO JUMO JUMO-01-60** [g] Insallaion Dawings ousing oe fo JUM-01 Pa numbe Shaf di f z Ø 7 h JUM ,0 2.6 JUM ,5 3.1 JUM ,7 3.6 JUM ,0 3.6 JUM JUM JUM JUM JUM JUM-01-60** ** in wo pas Ø Z / 2 Ø di Insallaion Dawings ousing oe fo JUMO-01 Pa numbe Shaf di W f z Ø 7 h JUMO JUMO JUMO JUMO JUMO JUMO JUMO JUMO JUMO-01-60** ** in wo pas W Ø Z / 2 Ø di RJUM-01/-03 RJUM-06/-06-LL FJUM-01/-02 TJUM-01/-03 OJUM-01/-03 OJUM-06/-06-LL 984 Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 985

7 f Linea Poduc Range Linea Poduc Range f Closed, long design, pecise Open, long design, pecise fo suppoed shafs JUM Y JUMO b1 Y Y 2:1 z Pecision b1 Y 2:1 z Pecision Open Max. beaing cleaance educed by 50 % compaed o Inceased beaing aea = longe sevice life JUM-01 Max. beaing cleaance educed by 50 % Inceased beaing aea = longe sevice life Pa numbe Toleance* b1 z Weigh JUM JUM JUM JUM JUM JUM JUM JUM [g] Pa numbe Toleance* b1 z Weigh JUMO JUMO JUMO JUMO JUMO JUMO JUMO JUMO [g] Insallaion Dawings ousing oe fo JUM-11 Pa numbe Shaf di f z Ø 7 h JUM Ø Z / 2 Insallaion Dawings ousing oe fo JUMO-11 Pa numbe Shaf di W f z Ø 7 h JUMO / 2 JUM JUMO JUM JUMO Ø di JUM Ø di JUMO JUM JUMO JUM JUM JUMO JUMO Ø Z JUM JUMO W RJUM-01/-03 RJUM-06/-06-LL FJUM-01/-02 TJUM-01/-03 OJUM-01/-03 OJUM-06/-06-LL 986 Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 987

8 f f Linea Poduc Range Linea Poduc Range Closed, sho design Closed, long design, high empeaue Y Y 2:1 z JUM Sho design Y Y 2:1 z XUM Sandad b1 b1 Maeial iglidu X vailable also as low-cleaance vesion (JUM-12...) Tempeaues fom 100 o +250 C Recommended in combinaion wih sainless seel o chome-plaed shafs 2-pas Pa numbe Toleance* b1 z Weigh JUM JUM JUM JUM JUM JUM JUM JUM JUM [g] Pa numbe Toleance* b1 z Weigh XUM XUM XUM XUM XUM XUM XUM [g] Insallaion Dawings ousing oe fo JUM-02 Insallaion Dawings ousing oe fo XUM-01 Pa numbe Shaf di f z Ø 7 h JUM Ø Z / 2 Pa numbe Shaf di f z Ø 7 h XUM Ø Z / 2 JUM XUM JUM XUM JUM JUM Ø di XUM XUM Ø di JUM XUM JUM XUM JUM JUM RJUM-02 RJUM-05/RJUME-05 FJUMT-01/-02 TJUM-05/RJUMT-05 RJUM-01/-03 RJUM-06/-06-LL FJUM-01/-02 TJUM-01/ Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 989

9 f f Linea Poduc Range Linea Poduc Range Open, long design, high empeaue fo suppoed shafs Y XUMO Sho, closed design, high empeaue XUM b1 Y 2:1 z Sandad Open Maeial iglidu X b1 Y Y 2:1 z Compac Maeial iglidu X Tempeaues fom 100 o +250 C Recommended in combinaion wih sainless seel o chome-plaed shafs 2-pas, fo suppoed shafs Tempeaues fom 100 o +250 C Recommended in combinaion wih sainless seel o chome-plaed shafs 2-pas Pa numbe Toleance* b1 z Weigh XUMO-01-10** XUMO XUMO XUMO XUMO XUMO XUMO [g] Pa numbe Toleance* b1 z Weigh XUM XUM XUM XUM XUM XUM [g] Insallaion Dawings ousing oe fo XUMO-01 Pa numbe Shaf di W f z Ø 7 h XUMO-01-10** XUMO XUMO XUMO XUMO XUMO XUMO Ø Z / 2 Ø di Insallaion Dawings ousing oe fo XUM-02 Pa numbe Shaf di f z Ø 7 h XUM XUM XUM XUM XUM XUM Ø Z / 2 Ø di ** in one pa W OJUM-01/-03 TJUM-01/-03 OJUM-06/-06-LL RJUM-02 RJUM-05/RJUME-05 FJUMT-01/-02 TJUM-05/RJUMT Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 991

10 f New in his caalog! Linea Poduc Range Noes long, closed design b1 z E7UM Sandad Maeial iglidu E7 Recommended in combinaion wih seel sainless seel shafs Tempeaues fom 30 o +80 C made fom iglidu E7 page 1266 Pa numbe Toleance* b1 z Weigh E7UM E7UM E7UM E7UM E7UM E7UM E7UM [g] Insallaion Dawings ousing oe fo E7UM-01 Pa numbe Shaf di f z Ø 7 h Ø Z / 2 E7UM E7UM E7UM E7UM E7UM E7UM E7UM Ø di RJUM-01/-03 RJUM-06/-06-LL FJUM-01/-02 TJUM-01/ Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 993

11 Pessfi eaing Poduc Range Pessfi eaing Poduc Range made of iglidu L100 page 1269 made of iglidu L100 page 1269 WLM WLFM bs b1 Lengh b1 Oue diamee Inne diamee Seies L1 Maeial iglidu L100 bs b1 b2 d3 Lengh b1 Oue diamee Inne diamee Flange Seies L1 Maeial iglidu L100 ighly wea-esisan Low ficion * Measued wih a plug gauge ighly wea-esisan Low ficion * Measued wih a plug gauge Pa numbe Toleance* b1 bs WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM WLM Pa numbe Toleance* d3 b1 b2 bs WLFM WLFM WLFM WLFM WLFM WLFM WLFM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 995

12 Linea Plain eaing Poduc Range Linea Plain eaing Poduc Range Closed anodised aluminium adape Closed anodised aluminium adape, pecise 1 RJUM RJUM dn Sandad dn Pecise s s Closed Closed Dimension equivalen o he sandad fo Dimension equivalen o he sandad fo eciculaing ball beaings ** Ø < 10 mm use iglidu JSM sleeve beaings eciculaing ball beaings ** design sandads page 982 JUM-01 line made of iglidu J *** design sandads page 982 Max. beaing cleaance educed by 50 % compaed o RJUM-01 Pa numbe Shaf Toleance* F max. F max. Weigh Ø beaing inne dynamic*** saic*** diamee P = 5 MPa P = 35 MPa [mm] [mm] [N] [N] [g] RJZM-01-05** ,675 5 RJZM-01-06** ,675 5 RJZM-01-08** ,720 9 RJUM , RJUM , RJUM ,440 10, RJUM ,250 15, RJUM ,625 25, RJUM ,100 35, RJUM ,000 56, RJUM ,500 87, Pa numbe 1 s dn h7 h h10 RJZM-01-05** RJZM-01-06** RJZM-01-08** RJUM RJUM RJUM RJUM RJUM RJUM RJUM RJUM Pa numbe Shaf Toleance* F max. F max. Weigh Ø beaing inne dynamic** saic** diamee P = 5 MPa P = 35 MPa [mm] [mm] [N] [N] [g] RJUM , RJUM , RJUM ,440 10, RJUM ,250 15, RJUM ,625 25, RJUM ,100 35, RJUM ,000 56, RJUM ,500 87, Pa numbe 1 s dn h7 h h10 RJUM RJUM RJUM RJUM RJUM RJUM RJUM RJUM RJUM-01 page 998 and RJUM-11 also available wih lines: RQ-01 RT-01 RG-01 RGS-01 XUM-01 E7UM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 997

13 Solid Polyme eaing Poduc Range Solid Polyme eaing Poduc Range Sandad ype made of iglidu J page 109 Sandad ype, pecise s 1,5 x 30 dn 1 RJM Sandad Closed s 1,5 x 30 dn 1 RJMP Sandad Pecision Closed Dimension equivalen o he sandad fo Easy assembly by sof pessfi eciculaing ball beaings ** design sandads page 982 Reduced beaing cleaance ** design sandads page 982 ssembly by pessfiing *** applies by oom empeaue pessfi deceases Tempeaues fom -20 C o +60 C Pess-in foces: see able wih depending on he empeaue Pa numbe Shaf Toleance* F max. dyn.** F max. sa.** Weigh Pessfi foce Ø fo P = 2.5 MPa P = 17.5 MPa [mm] E9 [mm] [N] [N] [g] [N] RJM , RJM , RJM , ,300 RJM , ,100 RJM ,125 7, ,500 RJM ,813 12, ,500 RJM ,550 17, ,500 RJM ,000 28, ,200 Pa numbe Shaf Toleance* F max. dyn.** F max. sa.** Weigh Ø fü P = 2.5 MPa P = 2.5 MPa [mm] [mm] [N] [N] [g] RJMP ,400 2 RJMP ,750 4 RJMP ,538 7 RJMP ,360 9 RJMP , RJMP ,125 7, RJMP ,813 12, RJMP ,550 17, Pa numbe 1 s dn RJM RJM RJM RJM RJM RJM RJM RJM Pa numbe 1 s dn RJMP RJMP RJMP RJMP RJMP RJMP RJMP RJMP RQ-04 RT-04 RGS-04 RG-04 RQ-04 RT-04 RGS-04 RG Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de 999

14 Linea Plain eaing Poduc Range Linea Plain eaing Poduc Range Closed sainless seel adape Spli anodised aluminium adape 1 RJUM ES s TJUM Sainless Seel dn Sandad dn Sandad s 1 Spli Closed Dimensions coespond o he sandad fo Dimensions coesp. o he sandad fo eciculaing ball eciculaing ball beaings ** design sandads page 982 beaings ** design sandads page 982 Quick eplacemen of beaing lining wihou dismanling he shaf Inch dimensions Pa numbe Shaf Toleance* F max. F max. Weigh Ø beaing inne dynamic** saic** diamee P = 5 MPa P = 35 MPa [mm] [mm] [N] [N] [g] RJUM ES , RJUM ES ,440 10, RJUM ES ,250 15, RJUM ES ,625 25, RJUM ES ,100 35, Pa numbe 1 s dn h7 h h10 RJUM ES RJUM ES RJUM ES RJUM ES RJUM ES Pa numbe Shaf Toleance* F max. dyn.** F max. sa.** Weigh beaing inne Ø P = 5 MPa P = 35 MPa diamee [mm] [mm] [N] [N] [g] TJUM , TJUM , TJUM ,440 10, TJUM ,250 15, TJUM ,625 25, TJUM ,100 35, TJUM ,000 56, TJUM ,500 87, Pa numbe 1 s dn h TJUM TJUM TJUM TJUM TJUM TJUM TJUM TJUM lso available wih lines: lso available wih lines: JUM-11 XUM-01 E7UM-01 RQ-01 RT-01 RG-01 RGS-01 JUM-11 XUM-01 E7UM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

15 Linea Plain eaing Poduc Range Linea Plain eaing Poduc Range Closed aluminium adape (floaing beaing) Spli aluminium adape (floaing beaing) o R s RJUM o R s TJUM ds do dn Self-aligning ds do dn Self-aligning e 1 Closed e 1 Closed Wih educed oue diamee, spheical aea on he oue Wih spheical aea on he oue diamee fo self aligning diamee, O-ings fo elasic seaing and had anodised ** Ø < 10 mm use iglidu JSM sleeve beaings puposes and O-ings fo elasic seaing ** design sandads page 982 suface *** design sandads page 982 Dimensions coespond o he sandad fo eciculaing ball beaings Floaing beaing page 982 Floaing beaing page 982 Inch dimensions Inch dimensions Pa numbe Shaf ousing boe Tol.* beaing F max. dyn.*** F max. sa.*** Weigh inne-ø [mm] Ø [mm] Ø 7 [mm] P = 5 MPa [N] P = 35 MPa [N] [g] RJZM-03-08** ,720 8 RJUM , RJUM , RJUM ,440 10, RJUM ,250 15, RJUM ,625 25, RJUM ,100 35, RJUM ,000 56, RJUM ,500 87, Pa numbe 1 s dn ds do o e R h8 h h10 h RJZM-03-08** RJUM RJUM RJUM RJUM RJUM RJUM RJUM RJUM Pa numbe Shaf Toleance* F max. F max. Weigh Ø beaing inne-ø dynamic** saic** [mm] [mm] P = 5 MPa [N] P = 35 MPa [N] [g] TJUM , TJUM , TJUM ,440 10, TJUM ,250 15, TJUM ,625 25, TJUM ,100 35, TJUM ,000 56, TJUM ,500 87, Pa numbe 1 s dn ds do o e R h h10 h TJUM TJUM TJUM TJUM TJUM TJUM TJUM TJUM lso available wih lines: lso available wih lines: RQ-03 RT-03 RG-03 RGS-03 JUM-11 XUM-01 E7UM-01 RQ-03 RT-03 RG-03 RGS-03 JUM-11 XUM-01 E7UM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

16 Linea Plain eaing Poduc Range Compac eaing Poduc Range Closed anodised aluminium adape, sho design RJUM Low-cos linea plain beaing c RJ260UM Compac Closed c Compac Gooved beaing 260 closed Dimensions equivalen o he sandad fo eciculaing ball beaings vailable also as low-cleaance vesion RJUM-12 (Ø mm) ** Ø < 10 mm use iglidu JSM sleeve beaings *** design sandads page 982 Dimensions equivalen o he sandad fo eciculaing ball beaings 2 Vaiaions: RJ260M (wih plain design) and RJ260UM (gooved sucue) ** design sandads page 982 Pa numbe Shaf ousing boe Toleance* F max. F max. Weigh beaing inne-ø Ø Ø 7/K7 dynamic*** saic*** [mm] [mm] [mm] P = 5 MPa [N] P = 35 MPa [N] [g] RJZM-02-06** ,200 4 RJZM-02-08** ,550 6 RJUM ,550 8 RJUM , RJUM ,200 8, RJUM ,500 10, RJUM ,500 17, RJUM ,750 26, RJUM ,000 42, RJUM ,750 61, Pa numbe k7 h10 RJZM-02-06** RJZM-02-08** RJUM RJUM RJUM RJUM RJUM RJUM RJUM RJUM Pa numbe Shaf Toleance* C F max. F max. Weigh Ø beaing inne dynamic** saic** diamee P=5 MPa P=35 MPa Gooved beaing [mm] [mm] [mm] [mm] [mm] [N] [N] [g] RJ260UM x , RJ260UM x , RJ260UM x , RJ260UM x 15 1,250 8, Pa numbe Shaf Ø Toleance* beaing inne C F max. dynamic** F max. saic** Weigh diamee P = 5 MPa P = 35 MPa Plain beaing [mm] [mm] [mm] [mm] [mm] [N] [N] [g] RJ260M x , RJ260M x , RJ260M x , RJ260M x 15 1,250 8, Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

17 Pillow lock Poduc Range Pillow lock Poduc Range Closed anodised aluminium pillow bock, sho ype djusable anodised aluminium housing, sho ype S RJUM S RJUME Sb M E S2 S1 N1 N2 L Pa numbe Shaf Toleance* Pa numbe 1 M E S S1 S2 N1 N2 L 1 Ø beaing inne dynamic*** saic*** diamee [mm] ±0.15 F max. F max. Weigh [mm] P = 5 MPa [N] P = 35 MPa [N] [g] RJZM-05-08** , RJUM , RJUM , RJUM ,200 8, RJUM ,500 10, RJUM ,500 17, RJUM ,750 26, RJUM ,000 42, RJUM ,750 61,250 1,168 Compac RJZM-05-08** M RJUM M RJUM M RJUM M RJUM M RJUM M RJUM M RJUM M RJUM M lso available wih lines: Closed ** Ø < 10 mm use iglidu JSM sleeve beaings *** design sandads page 982 L M E N2 N1 E1 S2 S1 Wih adjusable cleaance fo shaf diamees 12 o 50 mm Pa numbe Shaf Toleance* 1 Ø beaing inne dynamic** saic** diamee F max. F max. Weigh P = 5 MPa P = 35 MPa [mm] [mm] [N] [N] [g] RJUME adjusable 840 5, RJUME adjusable 1,200 8, RJUME adjusable 1,500 10, RJUME adjusable 2,500 17, RJUME adjusable 3,750 26, RJUME adjusable 6,000 42, RJUME adjusable 8,750 61,250 1,168 Pa numbe 1 M E E1 S S1 S2 Sb N1 N2 L ±0.15 ± RJUME M RJUME M RJUME M RJUME M RJUME M RJUME M RJUME M lso available wih lines: Compac djusable Closed ** design sandads page 982 XUM-02 JUM-12 XUM-02 JUM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

18 Pillow ock Poduc Range Pillow ock Poduc Range Spli anodised aluminium housing, sho ype N1 N2 Secional S view S1 S2 E Secional view M L 1 TJUM Compac Spli Closed anodised aluminium housing, sho andem ype M E1 1 E2 L N1 N2 S S2 S1 RJUMT Compac Tandem Closed Replacemen of he line is possible wihou emoving he shaf ** design sandads page 982 Tandem ype of design Equipped wih 2 JUM-02 lines o incease he guide lengh ** design sandads page 982 Pa numbe Shaf Toleance* F max. F max. Weigh Ø beaing inne dynamic** saic** diamee P = 5 MPa P = 35 MPa [mm] [mm] [N] [N] [g] TJUM ,200 8, TJUM ,500 10, TJUM ,500 17, TJUM ,750 26, TJUM ,000 42, Pa numbe 1 M E S S1 S2 N1 N2 L ±0,02 ±0.15 TJUM M TJUM M TJUM M TJUM M TJUM M lso available wih lines: Pa numbe Shaf Toleance* F max. F max. Weigh Ø beaing inne dynamic** saic** diamee P = 5 MPa P = 35 MPa [mm] [mm] [N] [N] [g] RJUMT , RJUMT ,200 8, RJUMT ,500 10, RJUMT ,500 17, RJUMT ,750 26, RJUMT ,000 42,000 1,500 RJUMT-05-50*** ,750 61,250 2,400 Pa numbe 1 M E1 E2 S S1 S2 N1 N2 L ±0.15 ± RJUMT M RJUMT M RJUMT M RJUMT M RJUMT M RJUMT M RJUMT-05-50*** M lso available wih lines: XUM-02 JUM-12 XUM-02 JUM-12 *** on eques 1008 Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

19 Pillow ock Poduc Range Pillow ock Poduc Range Closed anodised aluminium housing, long design M E1 1 E2 L N2 N1 S S2 S1 RJUM Long design Closed Floaing pillow block RJUM-06-LL S E1 E2 1 L 2 ±3.0 mm 2 RJUM LL Floaing Long design Closed ** design sandads page 982 Compensaion of paallelism eos up o 6 mm Quick assembly on aw pofiles ** design sandads page 982 Floaing beaing page 982 Pa numbe Shaf Toleance* F max. F max. Weigh Ø beaing inne dynamic** saic** diamee P = 5 MPa P = 35 MPa [mm] [mm] [N] [N] [g] RJUM , RJUM ,440 10, RJUM ,250 15, RJUM ,625 25, RJUM ,100 35,700 1,050 RJUM ,000 56,000 1,820 RJUM ,500 87,500 3,250 Pa numbe Shaf Toleance* F max. Weigh Ø beaing inne diamee saic o dynamic** [mm] [mm] [N] [g] RJUM LL RJUM LL RJUM LL , RJUM LL , RJUM LL , RJUM LL , RJUM LL ,500 1,550 Pa numbe 1 M E1 E2 S S1 S2 N1 N2 L ±0.15 ±0.15 RJUM M RJUM M RJUM M RJUM M RJUM M RJUM M RJUM M Pa numbe 1 E1 E2 S1 L 1 3 ±0.01 ±0.15 ±0.15 RJUM LL M RJUM LL M RJUM LL M RJUM LL M RJUM LL M RJUM LL M RJUM LL M lso available wih lines: lso available wih lines: RG-01 RG-03 RJUM-06-LL XUM-01 JUM-11 E7UM-01 RG-01 RG-03 RJUM-06 XUM-01 JUM-11 E7UM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

20 Linea Plain eaing Poduc Range Linea Plain eaing Poduc Range Open anodised aluminium adape Open anodised aluminium adape, floaing s f a OJUM R O s f a OJUM dn 90 W ds do 90 W Sandad Self-aligning h Open e 1 h Open Fo suppoed shafs Wih educed oue diamee, spheical aea on he ** design sandads page 982 Dimensions equivalen o he sandad fo ** design sandads page 982 oue diamee, O-ings fo elasic seaing and had eciculaing ball beaings anodised suface Floaing beaing page 982 Inch dimensions Inch dimensions Pa numbe Shaf Toleance* F max. [N] dyn.** F max. [N] sa.** Weigh beaing inne Ø P = 5 MPa P = 35 MPa diamee [mm] [mm] 0 º 90 º 180 º 0 º 90 º 180 º [g] OJUM ,075 3,500 1, OJUM ,720 4,445 1, OJUM , ,080 6,943 2, OJUM ,250 1, ,750 12,600 6, OJUM ,625 2,953 1,523 25,375 20,670 10, OJUM ,100 4,250 2,278 35,700 29,735 15, OJUM ,000 6,810 3,800 56,000 47,660 26, OJUM ,500 10,750 6,125 87,500 75,265 42, Pa numbe W a dn 1 s f h h7 h h ± OJUM OJUM (7 ) 1.2 OJUM OJUM OJUM ( 4.3 ) 1.5 OJUM (4.9 ) 2.0 OJUM (2.8 ) 2.0 OJUM (3.8 ) 2.0 Pa numbe Shaf ousing Toleance* F max. [N] dyn.** F max. [N] sa.** Weigh Ø boe beaing inne diamee [mm] P = 5 MPa P = 35 MPa [mm] Ø 7 0º 90º 180º 0º 90º 180º [g] OJUM ,075 3,500 1, OJUM ,720 4,445 1, OJUM , ,080 6,943 2, OJUM ,250 1, ,750 12,600 6, OJUM ,625 2,953 1,523 25,375 20,670 10, OJUM ,100 4,250 2,278 35,700 29,735 15, OJUM ,000 6,810 3,800 56,000 47,660 26, OJUM ,500 10,750 6,125 87,500 75,265 42, Pa numbe ds e o do 1 s W a f h h7 h h ± OJUM OJUM (7 ) 1.2 OJUM OJUM OJUM ( 4.3 ) 1.5 OJUM (4.9 ) 2 OJUM (2.8 ) 2 OJUM (3.8 ) 2 lso available wih lines: lso available wih lines: OQ-01 OG-01 OT-01 OGS-01 XUMO-01 JUMO-11 OQ-03 OG-03 OT-03 OGS-03 XUMO-01 JUMO Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

21 Pillow ock Poduc Range Pillow ock Poduc Range Open anodised pillow bock, long design Open anodised pillow bock, long design, adjusable W S OJUM W S OJUME M N1 N2 S2 S1 1 Long design M N1 N2 S2 S1 1 Long design djusable E2 L Open S3 E2 L Open E1 E1 ** design sandads page 982 Wih wo se scews (DIN 913), Cleaance adjusmen possible ** design sandads page 982 Pa numbe Shaf Toleance* F max. [N] F max. [N] Weigh Ø beaing inne dynamic** saic** diamee P = 5 MPa P = 35 MPa [mm] [mm] 0º 90º 180º 0º 90º 180º [g] OJUM ,720 4,445 1, OJUM , ,080 6,943 2, OJUM ,250 1, ,750 12,600 6, OJUM ,625 2,953 1,523 25,375 20,670 10, OJUM ,100 4,250 2,278 35,700 29,735 15, OJUM ,000 6,810 3,800 56,000 47,660 26,600 1,485 OJUM ,500 10,750 6,125 87,500 75,265 42,875 2,750 Pa numbe 1 M E1 E2 S S1 S2 N1 N2 W L +0.01; ±0.15 ± [ ] OJUM M OJUM M OJUM M OJUM M OJUM M OJUM M OJUM M Pa numbe Shaf Toleance* F max. [N] F max. [N] Weigh Ø beaing inne dynamic** saic** diamee P = 5 MPa P = 35 MPa [mm] [mm] 0º 90º 180º 0º 90º 180º [g] OJUME adjusable ,720 4,445 1, OJUME adjusable 1, ,080 6,943 2, OJUME adjusable 2,250 1, ,750 12,600 6, OJUME adjusable 3,625 2,953 1,523 25,375 20,670 10, OJUME adjusable 5,100 4,250 2,278 35,700 29,735 15, OJUME adjusable 8,000 6,810 3,800 56,000 47,660 26,600 1,490 OJUME adjusable 12,500 10,750 6,125 87,500 75,265 42,875 2,750 Pa numbe 1 M E1 E2 S S1 S2 S3 N1 N2 W L +0.01; ±0.15 ± [ ] OJUME M5 4.3 M OJUME M6 5.3 M OJUME M8 6.6 M OJUME M M OJUME M M OJUME M M OJUME M M lso available wih lines: lso available wih lines: OG-01 OG-03 OJUM-06-LL XUMO-01 JUMO-11 OG-01 OG-03 OJUM-06 XUMO-01 JUMO Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

22 Pillow lock Poduc Range Flange Pillow lock Poduc Range Floaing pillow bock Compensaion of paallelism eos up o 6 mm 3 1 W 3 1 S1 E1 E2 L OJUM LL ** design sandads page 982 Floaing eaing page 982 Pa numbe Shaf Toleance* F max. F max. Weigh Ø beaing inne diamee saic o dynamic** dynamic load a 180 ** [mm] [mm] [N] [N] [g] OJUM LL OJUM LL OJUM LL , OJUM LL ,550 1, OJUM LL ,300 2, OJUM LL ,000 3, OJUM LL ,500 6,100 1,400 Pa numbe 1 E1 E2 S1 L 1 3 W 2 ±30 mm ±0.01 ±0.15 ± [ ] OJUM LL M OJUM LL M OJUM LL M OJUM LL M OJUM LL M OJUM LL M OJUM LL M Floaing beaing Long design Open Made of anodised aluminium, flange Pa numbe Shaf Toleance* Ø db f s ds d3 d beaing inne diamee [mm] F max. dynamic** F max. saic** Weigh [mm] P = 5 MPa [N] P = 35 MPa [N] [g] FJZM-01-08** , FJUM , FJUM , FJUM ,440 10, FJUM ,250 15, FJUM ,625 25, FJUM ,100 35, FJUM ,000 56, FJUM ,500 87, Pa numbe d3 d f s db ds h7 FJUM Round FJZM-01-08** FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM Flange ** design sandads page 982 lso available wih lines: lso available wih lines: OG-01 OG-03 OJUM-06 XUMO-01 JUMO-11 XUM-01 JUM-11 E7UM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

23 Flange Pillow lock Poduc Range Flange Pillow lock Poduc Range Made of anodised aluminium, squae flange Made of anodised aluminium, /squae flange, Tandem ype of design db f s ds k FJUM FJUMT-01 FJUMT Squae 01 ; 02 squae d3 FJUMT d Tandem d Flange FJUMT-02 k Flange ** design sandads page 982 FJUMT f s db ds d3 d ** FJZMT-01/02-08 ae fied wih 2 pieces of JSM Pa numbe Shaf Toleance* F max. F max. Weigh Ø beaing inne dynamic** saic** diamee [mm] [mm] P = 5 MPa [N] P = 35 MPa [N] [g] FJZM-02-08** , FJUM , FJUM , FJUM ,440 10, FJUM ,250 15, FJUM ,625 25, FJUM ,100 35, FJUM ,000 56, FJUM ,500 87, Pa numbe d3 d k f s db ds h7 FJZM-02-08** FJUM FJUM FJUM FJUM FJUM FJUM FJUM FJUM lso available wih lines: XUM-01 JUM-11 E7UM-01 equipped wih wo JUM-02 lines fo inceased guiding lengh Pa numbe Dimension nominal diamee [mm] Toleance* beaing inne diamee [mm] Flange lengh Effecive suface aea Weigh [g] FJUMT-01/02- FJUMT-01/02- [mm] [mm] FJUMT-01 FJUMT-02 FJZMT- -08** FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT , FJUMT , FJUMT , Pa numbe d3 d k f s db ds h7 FJZMT- -08** FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT FJUMT Please inse: 01 fo o 02 fo squae flange 1018 Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

24 Quad lock Poduc Range Quad lock Poduc Range Closed design Open design RQ OQ Inne-Ø Inne-Ø 01: Sandad wih 01: Sandad wih RJUM-01 OJUM-01 03: wih RJUM-03 03: wih OJUM-03 04: wih RJM-01 luminium housing luminium housing OQ: Quad block ousing: luminium, equipped wih fou RQ: Quad block ousing: luminium, equipped wih fou wih OJUM beaings linea plain beaings wih RJUM beaings linea plain beaings S Please noe: Insallaion insucions page W S Please noe: Insallaion insucions page 983 M8x1 d D1 M8x1 S1 E S1 1 N E d D1 1 3 N R R Pa numbe Self- ll polyme d D1 1 3 R N E S S1 Sandad aligning beaing wih wih wih RJUM-01 RJUM-03 RJM-01 RQ RQ M5 RQ RQ RQ M6 RQ RQ RQ M6 RQ RQ RQ M8 RQ RQ RQ M10 RQ RQ RQ M12 RQ RQ RQ M16 e equipped wih: Pa numbe Self- d D1 1 W R N E S S1 Sandad aligning wih wih OJUM-01 OJUM-03 OQ OQ M6 OQ OQ M6 OQ OQ M8 OQ OQ M10 OQ OQ M12 OQ OQ M16 e equipped wih: RJUM-01 RJUM-03 RJM-01 OJUM-01 OJUM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

25 Pillow lock Poduc Range Pillow lock Poduc Range Closed, Tandem design Open, Tandem design RT OT Inne-Ø Inne-Ø 01: Sandad wih 01: Sandad wih RJUM-01 OJUM-01 03: wih RJUM-03 03: wih OJUM-03 04: wih RJM-01 luminium housing luminium housing OT: Tandem housing ousing: luminium, equipped wih 2 linea plain RT: Tandem housing ousing: luminium, equipped wih 2 linea plain wih OJUM beaings beaings o incease he guide lengh wih RJUM beaing beaings o incease he guide lengh Please noe: 60 W Please noe: d D Insallaion insucions page 983 d D Insallaion insucions page 983 M E1 L S1 4 M S1 L 4 E1 E2 E2 Pa numbe Self- ll polyme d D S1 L M E1 E2 Sandad aligning beaing ±0.02 ±0.15 ±0.15 wih wih wih 0.02 RJUM-01 RJUM-03 RJM-01 RT RT M RT RT RT M RT RT RT M RT RT RT M RT RT RT M RT RT RT M RT RT RT M e equipped wih: Pa numbe Self- d D S1 L M E1 E2 W Sandad aligning ±0.02 ±0.15 ±0.15 wih wih 0.02 OJUM-01 OJUM-03 OT OT M OT OT M OT OT M OT OT M OT OT M OT OT M e equipped wih: RJUM-01 RJUM-03 RJM-01 OJUM-01 OJUM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

26 Pillow lock Poduc Range Pillow lock Poduc Range Closed, long design Open, long design RG OG ousing: luminium, equipped wih 2 linea plain beaings Inne-Ø 01: Sandad wih RJUM-01 03: wih RJUM-03 04: wih RJM-01 luminium housing Linea housing wih RJUM beaings ousing: luminium, equipped wih 2 linea plain beaings 60 W Inne-Ø 01: Sandad wih OJUM-01 03: wih OJUM-03 luminium housing Linea housing wih OJUM beaings d D Please noe: Insallaion insucions page 983 d D Please noe: Insallaion insucions page 983 M S1 M S1 L E2 L E2 E1 E1 Pa numbe Self- ll polyme d D S1 L M E1 E2 Sandad aligning beaing ±0.3 ±0.02 ±0.15 ±0.15 wih wih wih 0.02 RJUM-01 RJUM-03 RJM-01 RG RG M RG RG RG M RG RG RG M RG RG RG M RG RG RG M RG RG RG M RG RG RG M Pa numbe Self- d D S1 L M E1 E2 W Sandad aligning ±0.3 ±0.02 ±0.15 ± wih wih 0.02 OJUM-01 OJUM-03 OG OG M OG OG M OG OG M OG OG M OG OG M OG OG M e equipped wih: e equipped wih: RJUM-01 RJUM-03 RJM-01 RJUM-06 OJUM-01 OJUM-03 OJUM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

27 Pillow lock Poduc Range Pillow lock Poduc Range Closed, sho design Open, sho design RGS OGS ousing: luminium, equipped wih linea plain beaings Vaiaions: Sandad: RGS-01-Ø Self-aligning: RGS-03-Ø ll polyme beaing (cos-effecive, ligh): RGS-04-Ø 2 ød Inne-Ø 01: Sandad wih RJUM-01 03: wih RJUM-03 04: wih RJM-01 Small luminium housing Linea ousing wih RJUM beaings Please noe: Insallaion insucions page 983 ousing: luminium, equipped wih linea plain beaings Vaiaions: Sandad: OGS-01-Ø Self-aligning: OGS-03-Ø 2 ( ) E3 Inne-Ø 01: Sandad wih OJUM-01 03: wih OJUM-03 Small luminium housing Linea ousing wih OJUM beaings Please noe: Insallaion insucions page ød ød 2 1 øs E1 E øs ød E1 E 1 Pa numbe Self- ll polyme d D E E1 S Sandad aligning beaing wih wih wih RJUM-01 RJUM-03 RJM-01 RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS RGS e equipped wih: 1 Pa numbe Self- d D E E1 E3 (º) S Sandad wih OJUM-01 aligning wih OJUM-03 OGS OGS OGS OGS OGS OGS OGS OGS OGS OGS OGS OGS e equipped wih: RJUM-01 RJUM-03 RJM-01 OJUM-01 OJUM Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

28 f f Linea Poduc Range Inch Linea Poduc Range Inch Closed, long ype Open, long ype Y Y 2:1 JUI Y Y 2:1 JUIO z z b1 Sandad Inch b1 Sandad Open Inch Fo suppoed shafs Fo supoed shafs Dimensions [Inch] Dimensions [Inch] Pa numbe Ø Shaf Toleance* b1 z JUI / JUI / JUI / JUI / JUI JUI / JUI / JUI Pa numbe Ø Shaf Toleance* b1 z JUIO / JUIO / JUIO / JUIO JUIO / JUIO / JUIO ousing oe fo JUI-01 Dimensions [Inch] Pa numbe di f z / 2 ousing oe fo JUIO-01 Dimensions [Inch] Pa numbe di f z / 2 7 h h min. max. min. max. JUI JUIO JUI Ø di JUIO Ø di JUI JUIO JUI JUIO JUI JUI JUI W Ø Z JUIO JUIO JUIO W Ø Z JUI RJUI-01/-03 TJUI-01/-03 OJUI-01/ Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

29 Solid Plasic eaing Poduc Range Inch Solid Plasic eaing Poduc Range Inch Sandad ype, pecise Sandad ype, pecise 1.5 x 30 s dn 1 RJI Sandad Inch s 1,5 x 30 dn 1 RJIP Sandad Pecise Inch Closed Closed Dimensions equivalen o he sandad fo Dimensions equivalen o he sandad fo eciculaing ball beaings eciculaing ball beaings Tempeaues fom -20 C o +60 C [Inch] [Inch] Pa numbe Shaf Toleance* F max. F max. Ø beaing inne diame- dynamic** saic** e P = 2.5 MPa P = 17.5 MPa RJI / ,855 RJI / ,535 RJI / ,285 RJI / ,877 RJI ,815 12,705 RJI / ,645 18,515 RJI / ,630 25,410 RJI ,452 45,167 Pa numbe Shaf Toleance* Fmax. Fmax. Ø beaing inne diame- dynamic** saic** e P = 2.5 MPa P = 17.5 MPa RJIP / ,267 RJIP / ,855 RJIP / ,535 RJIP / ,285 RJIP / ,877 RJIP ,815 12,705 RJIP / ,645 18,515 Dimensions [Inch] Pa numbe 1 s dn RJI / RJI / RJI / RJI / RJI RJI / RJI / RJI Dimensions [Inch] Pa numbe 1 s dn RJIP / RJIP / RJIP / RJIP / RJIP / RJIP RJIP / Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

30 R Linea Plain eaing Poduc Range Inch Linea Plain eaing Poduc Range Inch Closed, anodised aluminium adape vesion 01 Closed, anodised aluminium adape vesion 03 (floaing beaing) Spli aluminium adape vesion 01 Spli aluminium adape vesion 03 (floaing beaing) o s o s o s o s do dn ds do dn do dn ds do dn e 1 e 1 e 1 e 1 Dimensions equivalen o he sandad fo eciculaing ball beaings Wih educed oue diamee, spheical aea on he oue diamee, O-ings fo elasic seaing and had anodised suface ** Ø < 3/8 Inch wih pessfi sleeve beaings Dimensions equivalen o he sandad fo eciculaing ball beaings Wih spheical aea on he oue diamee and O-ings fo elasic seaing Please noe: Insallaion insucions page 983 Dimensions [Inch] Pa numbe Ø Shaf Toleance* 1 h7 h10 10 RJZI-01-04**/-03-04** 1/ / / /.5270 RJUI-01-06/ / / / /.6520 RJUI-01-08/ / / / /.9870 RJUI-01-10/ / / / / RJUI-01-12/ / / / / RJUI-01-16/ / / / RJUI-01-20/ / / / / RJUI-01-24/ / / / / RJUI-01-32/ / / / Dimensions [Inch] Pa numbe s dn ds do e o 10 h10 h RJZI-01-04**/-03-04** RJUI-01-06/ RJUI-01-08/ RJUI-01-10/ RJUI-01-12/ RJUI-01-16/ RJUI-01-20/ RJUI-01-24/ RJUI-01-32/ Dimensions [Inch] Pa numbe Ø Shaf Toleance* 1 h7 h10 10 TJUI-01-08/ / / TJUI-01-10/ / / TJUI-01-12/ / / TJUI-01-16/ / TJUI-01-20/ / / TJUI-01-24/ / / TJUI-01-32/ / Dimensions [Inch] Pa numbe s dn ds do e o 10 h10 h TJUI-01-08/ TJUI-01-10/ TJUI-01-12/ TJUI-01-16/ TJUI-01-20/ TJUI-01-24/ TJUI-01-32/ Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de

31 Linea Plain eaing Poduc Range Inch igus Tesing Mehod Open anodised aluminium adape vesion 01 Open anodised aluminium adape vesion 03 (floaing) igus Tesing mehod fo measuing he oleance of dylin plain beaings G S øf R O s f a To ensue he coec funcion of a dylin plain beaing, i is necessay o use he beaing wih a defined minimum cleaance. The qualiy conol of his dimension is caied ou wih a plug gauge es. Fo his pupose, specific foce is defined wih which he plug gauge is loaded when he plain beaing is esed. do dn 30 W ds do 90 W Fo suppoed shafs 1 Wih educed oue diamee, spheical aea on he oue diamee, O-ings fo elasic seaing and had anodised suface Dimensions [Inch] Pa numbe Ø Shaf Toleance* W h7 h10 ±0.012 OJUI-01-08/ / / / OJUI-01-10/ / / / OJUI-01-12/ / / / OJUI-01-16/ / / OJUI-01-20/ / / / OJUI-01-24/ / / / OJUI-01-32/ / / Dimensions [Inch] Pa numbe s dn 1 F G do h OJUI-01-08/ / OJUI-01-10/ / OJUI-01-12/ / OJUI-01-16/ / OJUI-01-20/ / OJUI-01-24/ / OJUI-01-32/ / e 1 Please noe: Consucion sandads page 983 h Pa numbe Tes foce Ø-i es housing Min. beaing Øi Max. beaing Øi [N] (c. gauge-fee) (wih c. gauge) JUM-01/ mm mm mm JUM-01/ mm mm mm JUM-01/ mm mm mm JUM-01/ mm mm mm JUM-01/ mm mm mm JUM-01/ mm mm mm JUM-01/ mm mm mm JUM-01/ mm mm mm JUI Inch Inch Inch JUI Inch Inch Inch JUI Inch Inch Inch JUI Inch Inch Inch JUI Inch Inch Inch JUI Inch Inch Inch JUI Inch Inch Inch JUI Inch Inch Inch RJM mm mm mm RJM mm mm mm RJM mm mm mm RJM mm mm mm RJM mm mm mm RJM mm mm mm RJM mm mm mm RJM mm mm mm RJI Inch Inch Inch RJI Inch Inch Inch RJI Inch Inch Inch RJI Inch Inch Inch RJI Inch Inch Inch RJI Inch Inch Inch RJI Inch Inch Inch RJI Inch Inch Inch RJ260(U)M mm mm mm RJ260(U)M mm mm mm RJ260(U)M mm mm mm RJ260(U)M mm mm mm 1034 Life calculaion, CD files and much moe suppo igu s Gmb Gemany Phone Fax -334 info@igus.de