Standard Factory Pre-charge 40 PSIG (2.8 kg/cm 2 )
|
|
|
- Hubert Derek Spencer
- 6 years ago
- Views:
Transcription
1 THRM-X-TROL Thermal xpansion bsorbers, ST-Series (Non-SM) 150 PSIG Working Pressure In-Line Models Model Tank Max. Sys. Ship No. Vol. ccept. Height Diameter onn. Wt. Lit. Gal. Factor cm ins. cm ins. NPTM kg lbs. ST ST ST-5, ST-12 Stand Models Model Tank Max. Sys. Ship No. Vol. ccept. Height Diameter onn. Wt. Lit. Gal. Factor cm ins. cm ins. NPTF kg lbs. ST-25V ST-30V ST-42V ST-60V ST-80V ST-180V ST-210V Operating Temperature 200 F (93 ) Working Pressure 150 PSIG (10.5 kg/cm 2 ) ST-25V through ST-210V Standard Factory Pre-charge 40 PSIG (2.8 kg/cm 2 ) System onnection rass (ST5,12) Stainless (Stand Models) utyl/pdm Liner Material ll dimensions and weights are approximate. Job Name Location ontractor ontractor P.O. No. Sales Representative Model No. Ordered ngineer (11/04) Submittal data sheets can ONLY be ordered as a "Submittal Data Sheet Pack", using M# They are not available to order on an 38 individual basis, however each data sheet is available on the mtrol Web Site and can be downloaded and printed for use as needed.
2 WLL-X-TROL WX-400 Series (Non-SM) 150 PSIG Working Pressure Non-SM Models Tank Max. D Sys. Ship Model Vol. ccept. Height Diameter onn. Inset onn.enterline onn. Wt. No. Lit. Gal Factor mm ins. mm ins. mm ins. mm ins. ins. ins. kg lbs. WX / / / / / WX / / / / / WX / / / / / WX / / / / WX / / / / WX / / / WX / / / Operating Temperature 200 F (93 ) Working Pressure 150 PSIG (10.5 bar) HRGING VLV ode pprovals System onnection Liner oating Factory Precharge Heavy Duty utyl/pdm NSI/NSF61 Malleable Iron (NPT) 30 PSIG (2.2 bar) D ll dimensions and weights are approximate. Job Name Location ngineer Model No. Ordered System Pressure Range Pre-harge Pressure Pump GPM Date Submitted ontractor ontractor P.O. No. Sales Representative Submittal data sheets can ONLY be ordered as a "Submittal Data Sheet Pack", using M# They are not available to order on an individual basis, however each data sheet is available on the mtrol Web Site and can be downloaded and printed for use as 5 needed.
3 Note: llow 18" (460mm) minimum clearance. Non-SM Models WLL-X-TROL WX-440/450 Series (Non-SM) 150 PSIG Working Pressure Tank 0 PSIG Max.Recomm. Sys. Ship Model Vol. cc. Vol. cc.vol. Height Diameter onn. D Wt. No. Lit. Gal Gal Lit. Gal mm ins. mm ins. ins. ins. ins. ins. kg lbs. WX / / WX / / WX / / WX / / WX / /2 5 1 / WX /2 5 1 / WX / WX / WX / / WX / /2 7 1 / WX / /2 7 1 / Operating Temperature 240 F (115 ) Working Pressure 150 PSIG (10.5 bar) HRGING VLV ladder Heavy Duty utyl NSI/NSF 61 ladder Thickness.100 Ins. Minimum System onnection Malleable Iron (NPTF) oating Factory Precharge 25 PSIG (1.8 bar) D Job Name Location ontractor ontractor P.O. No. Sales Representative Model No. Ordered ngineer 11 Submittal data sheets can ONLY be ordered as a "Submittal Data Sheet Pack", using M# They are not available to order on an individual basis, however each data sheet is available on the mtrol Web Site and can be downloaded and printed for use as needed.
4 THRM-X-TROL Thermal xpansion bsorbers, ST- Series (SM) 150 PSIG Working Pressure In-Line Models c HRGING VLV HRGING VLV ST5- ST12- ST-20V- ST-30V- ST-42V- ST-60V- ST-70V- HRGING VLV ST-80V- ST-120V- ST-180V- ST-210V- Model Tank Max. Recomm. Sys. Ship No. Vol. ccept Vol. Height Diameter onn. Wt. Lit. Gal. Lit. Gal mm ins. mm ins. ins. kg lbs. ST NPT ST NPT Operating Temperature Working Pressure Standard Factory Pre-charge System onnection Liner Material Stand Models Model Tank Max. Recomm Sys. Ship No. Vol. ccept. Vol. Height Diameter Dim. onn. Wt. Lit. Gal Lit. Gal mm ins. mm ins. mm ins. ins. kg lbs. ST-20V NPTF ST-30V NPTF ST-42V NPTF ST-60V NPTF ST-70V NPTF ST-80V NPTF ST-120V NPTF ST-180V NPTF ST-210V NPTF F (93 ) 150 PSIG (10.5 bar) 55 PSIG (3.9 bar) Stainless Heavy Duty utyl/pdm NSI/NSF61 onstructed per SM ode Section VIII, Division 1. ll dimensions and weights are approximate. Job Name Location ontractor ontractor P.O. No. Sales Representative Model No. Ordered ngineer Submittal data sheets can ONLY be ordered as a "Submittal Data Sheet Pack", using M# They are not available to order on an 38 individual basis, however each data sheet is available on the mtrol Web Site and can be downloaded and printed for use as needed.
5 1 System connection is NPT XTROL xpansion Tanks L Series (SM) 175 PSIG and 250 PSIG Working Pressure Model Tank Sys. Shipping Weight No. Volume Height Diameter Stand Dia. onn PSIG 250 PSIG Lit. Gal. mm ins. mm ins. mm ins. ins. kg lbs. kg lbs. 200-L L L L L L L L L L L L L L L L L L L Operating Temperature Working Pressure (Indicate 175 or 250 when ordering) ladder ladder Thickness System onnection Factory Precharge 175 and 250 PSIG WP SM Models Designed & constructed per SM Section VIII, Division 1. llow 18 (460 mm) Minimum learance for Piping. 240 F (115 ) 175 PSIG (12.3 bar) or 250 PSIG (17.6 bar) Heavy Duty utyl NSI/NSF Ins. Minimum Forged 12 PSIG (.84 bar) F 120 OTTOM VIW Optional Seismic Restraints SYSTM ONNTION LIFTING RING HRGING VLV LIFTING RING 3/4" DRIN PLUG HOL SIZ "G" ON OLT IRL "D" TNK OLT HOL Diam IRL DIM. DIM. SIZ D F G ll dimensions and weights are approximate. Job Name Location ngineer ontractor ontractor P.O. No. Sales Representative Model No. Ordered System Operating Temp Range System Operating Pressure Range Tank Precharge PSIG Date Submitted SM RTIFITION RQUIRD YS NO Submittal data sheets can ONLY be ordered as a "Submittal Data Sheet Pack", using M# They are not available to order on an individual basis, however each data sheet is available on the mtrol Web Site and can be downloaded and printed for use as 35 needed.
6 THRM-X-TROL Thermal xpansion bsorbers, ST- Series (SM) 250 PSIG Working Pressure SYSTM ONNTION HRGING VLV ST-5- ST-12- In-Line Models Model Tank Max. Recomm. Sys. Ship No. Vol. ccept. Vol. Vol Height Diameter onn. Wt. Lit. Gal Lit. Gal mm ins. mm ins. ins. kg lbs. ST NPTF ST NPTF c SYSTM ONNTION HRGING VLV HRGING VLV ST-20V- ST-30V- ST-42V- ST -60V- ST -70V- Operating Temperature Working Pressure Stand Models Model Tank Max. Recomm. Sys. Ship No. Vol. ccept. Vol. Height Diameter Dim. onn. Wt. Lit. Gal Lit. Gal mm ins. mm ins. mm ins. ins. kg lbs. ST-20V NPTF ST-30V NPTF ST-42V NPTF ST-60V NPTF ST-70V NPTF ST-80V NPTF ST-120V NPTF ST-180V NPTF ST-210V NPTF onstructed per SM ode Section VIII, Division 1. ll dimensions and weights are approximate. 200 F (93 ) 250 PSIG (17.6 bar) ST-80V- ST-120V- ST-180V- ST-210V- Standard Factory Pre-charge 55 PSIG (3.9 bar) System onnection Stainless Heavy Duty utyl/pdm NSI/NSF61 Liner Material oating Job Name Location ontractor ontractor P.O. No. Sales Representative Model No. Ordered ngineer Submittal data sheets can ONLY be ordered as a "Submittal Data Sheet Pack", using M# They are not available to order on an 39 individual basis, however each data sheet is available on the mtrol Web Site and can be downloaded and printed for use as needed.
7 WLL-X-TROL WX-400- Series (SM) 250 PSIG Working Pressure SM Models Tank Max. D Sys. Ship Model Vol. ccept. Height Diameter onn. Inset onn.enterline onn. Wt. No. Lit. Gal Factor mm ins. mm ins. mm ins. mm ins. ins. ins. kg lbs. WX / / / / / WX / / / / / WX / / / / / WX / / / / WX / / / / WX / / / WX / / / Operating Temperature 200 F (93 ) Working Pressure 250 PSIG (17.6 bar) HRGING VLV lso available with 125 PSIG (8.8 bar), 150 PSIG (10.5 bar) and 175 PSIG (12.3 bar) ode pprovals System onnection Liner oating Factory Precharge Heavy Duty utyl/pdm NSI/NSF61 Malleable Iron (NPT) 30 PSIG (2.2 bar) D onstructed per SM ode Section VIII, Division 1. ll dimensions and weights are approximate. Job Name Location ngineer Model No. Ordered System Pressure Range Pre-harge Pressure Pump GPM Date Submitted ontractor ontractor P.O. No. SM RTIFITION RQUIRD YS NO Sales Representative Submittal data sheets can ONLY be ordered as a "Submittal Data Sheet Pack", using M# They are not available to order on an individual basis, however each data sheet is available on the mtrol Web Site and can be downloaded and printed for use as 9 needed.
8 SM Models WLL-X-TROL WX-440-/450- Series (SM) 250 PSIG Working Pressure Tank 0 PSIG Max. Recomm. Sys. Ship Model Vol. cc. Vol. cc.vol. Height Diameter onn. D Wt. No. Lit. Gal Gal Lit. Gal mm ins. mm ins. ins. ins. ins. ins. kg lbs. WX / WX / / WX / / WX / / WX / / WX / / WX / /8 6 3 / WX / /8 6 3 / WX / /8 6 3 / WX / /2 6 7 / WX / /2 6 7 / Note: llow 18" (460mm) minimum clearance. Operating Temperature 240 F (115 ) Working Pressure 250 PSIG (17.6 bar) lso available with 125 PSIG (8.8 bar),150 PSIG (10.5 bar) and 175 PSIG (12.3 bar) ladder Heavy Duty utyl NSI/NSF 61 ladder Thickness.100 Ins. Minimum System onnection Malleable Iron (NPTF) oating Factory Precharge 25 PSIG (1.8 bar) HRGING VLV onstructed per SM ode Section VIII, Division 1. ll dimensions and weights are approximate. D Job Name Location ngineer ontractor ontractor P.O. No. Sales Representative Model No. Ordered SM RTIFITION RQUIRD YS NO Submittal data sheets can ONLY be ordered as a "Submittal Data Sheet Pack", using M# They are not available to order on an individual basis, however each data sheet is available on the mtrol Web Site and can be downloaded and printed for use as 15 needed.
WELL-X-TROL ASME WATER SYSTEM TANKS
WELL-X-TROL ASME WATER SYSTEM TANKS ASME Water Tanks for Commercial & Industrial Applications WELL-X-TROL ASME: The Professionals Choice Table of Contents The AMTROL Advantage... 2 A Wide Range of Applications...
Commercial Thermal Expansion Tanks. For Closed Thermal Water Systems
Commercial Thermal Expansion s For Closed Thermal Water s mtrol thermal expansion tanks are engineered to control pressure build-up in closed, potable water systems. vailable in diaphragm, full acceptance
AURORA ACCESSORIES EXPANSION TANKS (ASME)
UROR ESSORIES EXPNSION TNKS (SME) 1060 SERIES Section 1060 Page 201 ated MY 2010 1/2" F E H Furnish and install, as shown on the plans, a gal. (L), dia. x long urora 1060 Series plain steel expansion tank.
Applications. residential. light commercial. pressure boosting
Applications residential light commercial Easier to install than steel, and over time, much tougher to beat. pressure boosting Our WM-Series offers features and benefits steel tanks just can t match. From
FRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
Butterfly Valve - Series 200
utterfly Valve - Series 200 utterfly Valve design is the most common type of rotary valve and provides low weight to v Ratio combined with simplicity of design and comparatively low cost. It is a simple
Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
Resilient-Seated Gate Valves with Vertical or Cross Wall Post Indicator
Worldwide ontacts www.tyco-fire.com Resilient-Seated Gate Valves with Vertical or ross Wall Post Indicator General Description TYO Resilient-Seated Gate Valves with Vertical and ross Wall Indicators are
PROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL
PROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL 1.1 SUMMARY A. Packaged Chillers offer a self-contained means of producing cooling liquid primarily
Oil and Gas - O&G Series Bladder Accumulators
Oil and Gas - O&G Series ladder ccumulators High Pressure, 07 to 760 bar Catalogue HY0-4004/UK rev. 0 escription esigned for high pressure hydraulic systems, the O&G bladder accumulator has been developed
General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS
General Purpose all Valves RTIFID TO ISO 92 QULITY STNDRDS VOP- ON-PI RDUD PORT GNRL PURPOS LL VLV 4 2 (8 mm) RON OR STINLSS STL ODY, RPTF STS FIGUR NUMR RON = S-L2-SSG F8M = S-L-SSG STNDRD MTRILS PRT
Bladder Accumulators za03 Bottom Repairable Top Repairable Medium Flow High Flow Transfer Barrier Gas Bottle
LADDER PRODUCTS za03 ottom Repairable Top Repairable Medium Flow High Flow Transfer arrier Gas ottle Features: Operating Pressures to 6600 PSI Ten Different Capacities from 10 cu in to 15 gallons Nine
PG-HHS
www.watts.com PG-HHS Watts Quality Sets the Standard in Hydronics With Watts hydronic products, you get longer valve life, economical control of heating and cooling zones, energy savings for your customers
Pipe Hangers. 47 B-Line series Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
Pipe Hangers. Pipe Hangers. Pipe Hangers & Supports
Pipe hangers offered in this section are designed to support insulated or non-insulated pipe allowing for vertical adjustment and limited movement in the piping system. Materials arbon Steel, Malleable
Centro-Matic Automatic Lubrication Systems FlowMaster Hydraulic Pump
FlowMaster Hydraulic Pump High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors with reciprocating pump tubes and flexible control features that perform in desert heat and arctic
PUMPS Bulk Chemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker Car Unloading
olted Plastic olted Metallic lamped Metallic E3 TREE IN PUMPS ulk hemical Transfer Resins Transfer Wastewater Treatment Food Processing Filter Press Applications Tanker ar Unloading When you need to pump
ANSUL. Vertical and Horizontal Bladder Tanks
NSUL SYSTEM OMPONENTS U.S..G. PPROVL NO. 162.033/14/0 REV. 0 UL EX-3933 7-1-94 Page 2-59 Vertical and Horizontal ladder Tanks PPLITION The nsul bladder tank is one component in a balanced pressure proportioning
Model Performance SW VersaJet. Shut-off PSI 118 Max. Lift 90 Conv. VersaJet Pro. Shut-off PSI 111 Max. Lift 90 Pro (RM2) Series
JET PUMPS Franklin s jet pumps can be configured for a variety of pressures and flow choices, and are Ideal for supplying fresh water to homes, cabins, farms, or practically anywhere that has a suction
Installation Components AirCare Air Preparation Systems
Modular Line Filters 602104 602106 602108 602109 250 psig / 17 bar Body Material icle Zinc Zinc* * Sintered Polypropylene 40µ 602104 Drain Type Port PTF ¹ ₄ 602106 Manual ³ ₈ A B C Dia. 5.27 / 1.34 0.75
4900 Series Air Separators Standard & High Velocity
Air Seperator - AS2, 3, 4 Air limination & ontrol 4900 Series Air Separators Standard & High Velocity Save money and lengthen the life of system pumps, piping, and components with the Taco 4900 Series
BC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
Sewage Treatment Industry
Index ommitment to Quality Sure low quipment Inc. is ISO 9001:2000 Registered and also holds an ISO 9001:2000 ertificate of Registration from the lobal ertification Network. Sure low quipment Inc., for
VG4000 Series. High-Capacity/High-Closeoff Electric Zone Valves
Product ulletin VG000 Issue ate 11/01/01 VG000 Series High-apacity/High-loseoff Electric Zone Valves VG000 Series High-apacity/High-loseoff Electric Zone Valves are designed to regulate the flow of water
The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York Bulletin 617 Rev. C
ulletin 617 Rev. Model R ommercial Riser Riser Manifold for ommercial pplications ulletin 617 Rev. vailable Sizes/Pressure Ratings: 1 1 / 2 (40mm) and 2 (50mm) Threaded - 250 psi (17,2 bar) Working Pressure
W94. Specifications. Protection: Models Temperature Range Capillary Length Sensing Bulb Valve Body Selection
Temperature Model W91 (No Indicating Dial) W94 (Temperature Indicating Dial) Service Water, Steam, Other Liquids Sizes 1/2 4 onnections Threaded, Union Ends, 125# FLG 250# FLG (optional) ody Material 1/2
SUBMITTAL DATA SHEET FEATURES. SPLIT-SYSTEM EVAPORATOR BLOWERS 7.5, 10, 15, 20 & 25 TONS MODELS: J07 thru 25NC, 2-PIPE J10 thru 20ND, 4-PIPE
SUBMITTAL DATA SHEET SPLIT-SYSTEM EVAPORATOR BLOWERS 7.5, 10, 15, 20 & 25 TONS MODELS: J07 thru 25NC, 2-PIPE J10 thru 20ND, 4-PIPE JOB NAME: LOCATION: PURCHASER: ORDER NO: ENGINEER: SUBMITTED TO: FOR:
AGD AND AGD4A SERIES
Job Name: Job Location: Engineer: Tag: AGD AND AGD4A SERIES DESCRIPTION The Apollo Air Gap Drain (AGD) is designed to funnel minor discharges from a Reduced Pressure Backflow Preventer s relief valve due
Modulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
CHECK VALVES MUELLER CHECK VALVES TECHNICAL DATA. Flare to Flare. Solder to Solder. Solder to Solder - Extended Ends. Shipped loosely assembled.
MUELLER CHECK VLVES TECHNICL DT CHECK VLVES vailable in 1/4 through 5/8 flare sizes and 1/4 thru 7/8 solder sizes. Recognized under the component program of Underwriters Laboratories for use in the US
Parts List Recessed Laboratory Units
Recessed Laboratory Units Item Part Number Description C P470-021LDC FS-Plus Spray Head P450-048 10 Dia. Stainless Steel Shower Head P450-062 P450-016 10 Dia. Recessed Flanged Stainless Steel Shower Head
Air and Vacuum Sewer Valves. Stainless Steel Trim Standard. Short Air & Vacuum Sewer Series
ir and Vacuum Sewer Valves ir and Vacuum Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable
Model AD-29A Automatic Air Spray Gun and Can Marking System
Model AD-29A Automatic Air Spray Gun and Can Marking System Part 07 979A NORDSON CORPORATION. AMHERST, OHIO. USA 2-454d TECHNICAL PUBLICATION Nordson Corporation Finishing Equipment Division ISSUED 4/85
CONTROL VALVES W910 Series
ONTROL ompact ontrol Valve Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel ompany Models W910, W910, W910, W910T, W910EP,
Royal Process Gauges, ±0.5% Accuracy 316 SS Tube and Socket Dial Size
Movement: All 300 series stainless steel Pointer: Geared micrometer adjustable, balanced Dial: White enameled aluminum with black graduations and numerals 270 Arc Dial Sizes: 4 1 /2 Thread Size: 1 /4 male
M20 Duplex Pump Data C8 Controller Data Sheet
Submittal Information Item M20 Title Duplex Fuel Oil Pump Specificatiions Flow Rate Motor HP Volt-Ph-Hz Special Items Contents Title Page M20 Duplex Pump Data C8 Controller Data Sheet Drawing and 3D Model
MOISTURE LIQUID INDICATORS
MOISTURE LIQUI INITORS HENRY TEHNOLOGIES SIGHT GLSSES (ULLS EYE TYPE) lear Lens SG-1000 Series Reflex Lens SG-1100 Series P4453 These sight glasses are available in three basic styles; lear Lens; Reflex
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
The SC Series Surge Check Valves Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves.
The Series Sizes 3 thru 24 Available Cast Iron Construction Limits the Effects of System Surge on Air Release Valves Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA
Industrial Pumping Equipment PileDriver III Series III Air Motor Features
PileDriver III Series III Air Motor Features These fully pneumatic air motors reverse stroke direction without mechanical linkages and are simpler and more reliable than older designs. Air motors are 3,
Hydronic Heating Specialties
Hydronic Heating Specialties watts.com 2 Watts Quality Sets the Standard in Hydronics With Watts hydronic products, you get longer valve life, economical control of heating and cooling zones, energy savings
CAST IRON THREADED FITTINGS
q IGUR 59 Size lack NPS N NPS N NPS N in mm in mm in mm in mm in mm in mm lbs kg /4 8 /6 7 /6 7 /6 22 /8 29 /8 29 /8 29 0.57 0.26 /2 5 /2 5 /8 0 /6 7 /6 7 /4 9 /8 29 /8 29 /8 29 0.57 0.26 /4 20 /6 22 /6
YMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
ELH Series - Hydraulic Fan Drive
- Hydraulic Fan Drive ir ooled Oil oolers for Mobile pplications Description These coolers use a combination of high performance cooling elements combined with a high capacity hydraulic fan drive to give
CONN in mm in mm in mm SIZE lbs kg PX " /4"
ccessories 1 PV MNUL IR VENT PRESSURE / TEMPERTURE ombination Manual ir Vent and Pressure/Temperature Test Port with brass body, dual durometer EPDM core, blowout-proof stem, side discharge vent with 1/8
Hydronic Heating Specialties
Hydronic Heating Specialties watts.com Watts Quality Sets the Standard in Hydronics With Watts hydronic products, you get longer valve life, economical control of heating and cooling zones, energy savings
SECTION 1 PUMP & WELL
SECTION 1 PUMP & WELL PRODUCT LINE PAGE Air Volume Controls & Releases............................33-34 Clear Braided PVC Hose..................................31-32 Constant Pressure Manifold Systems.........................4-8
FH Fan-Coil Units Low-Profile, Horizontal
FH Fan-oil Units Low-Profile, Horizontal FH Fan-oil Units: Innovative design simplifies installation and service Owners HRI Standard 440-certifi cation ensures exacting performance. The FH fan-coil unit
Mark 53/54 Series. Pressure Regulators Mark 53 Differential Back Pressure Regulators. Differential Back Pressure Regulators.
Mark 53/54 Series ifferential Back Pressure Regulators The Jordan Mark 53 maintains a constant differential between the inlet pressure and the pressure loaded on top of the diaphragm. It can be used for
Ground Wire Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB. 4 in. 5 in. #4 4/0 AWG 3906-TB
lamps Waterpipe Ground lamps Waterpipe Ground lamps Waterpipe Ground lamps 2-T Ground Wire Size Water Pipe Size 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, #2 WG 4 2-1/2
BALANCED PRESSURE PROPORTIONING BLADDER TANK SYSTEM
BLNCD PRSSUR PROPORTIONING BLDDR TNK SYSTM Features ccurate Proportioning of Foam Concentrate into firewater stream to produce the optimum extinguishing solution Shell constructed of Steel complying to
VG2000 Series Cast Iron Flanged Globe Valves
Installation Instructions VG2000 Issue ate November 15, 2002 VG2000 Series ast Iron Flanged Globe Valves pplication VG2000 Series ast Iron Flanged Globe Valves are primarily designed to regulate the flow
INFINITE ENERGY 2-199
3" AIR 3" FLUE RSUB-191 1 1/2" NPT 1" NPT 1 1/2" NPT FRONT VIEW Fuel Type Natural/Propane Gas Boiler FLA.92* Input BTU/hr. 200,000 / 59 kw Min. Gas Pressure Required 3" W.C.** Output BTU/hr. 183,600 /
AN ISO 9001 : 2008 COMPANY GLOBE VALVES. Get the edge in process control. Butterfly Valves India Pvt. Ltd.
N ISO 9001 : 2008 OMPNY GLOE VLVES Get the edge in process control utterfly Valves India Pvt. Ltd. Introduction Hi-TEH Manufacturing Programme Valve Type End SME 2 2½ 3 4 5 6 8 10 12 onn. lass DESIGN STNDRD
Tubing, Fittings and Air Handling System Components
Tubing, Fittings and ir Handling System omponents INDEX Tubing 5 METLLI TUING ND FITTINGS FOR IR HNDLING SYSTEMS Standard fittings Special fittings Vacuum system inlet valves Special fabrication services
SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
HART Series Fabricated Strainers
Table Of ontents HART Series Fabricated Strainers Fabricated Strainers................................................2 HART Series T,T and TP Temporary Strainers.........................3 HART Series
Submittal. THBP Horizontal Low Profile Plenum Return FCU-THBP Top View (Drain Pan Omitted) Bottom View. Front View.
U-THBP-.0 03-0-8 THBP Horizontal Low Profile Plenum Return Top View (rain Pan Omitted) Bottom View ront View Left hand unit shown. ll dimensions are inches [millimeters]. Side View [8] 26 [6] [06] [270]
F20 & F21 QIX Particulate & Coalescing Filters
F2, F21 Series QIX Filters 1/4, 3/8, 1/2, 3/4 & 1 Inch Ports F2 & F21 QIX Particulate & oalescing Filters Manual rain utomatic rain Unique Interchangeable QIX Inserts llow One Module to ccommodate Port
Process Filtration From Pure to Sterile
rom Pure to Sterile MIN TURS & NITS: High quality stainless steel design xtremely low differential pressure Various connection types rom 60 m 3 /h up to 19.200 m 3 /h INDUSTRIS: ood & everage ngineering
Direct-Fired Heating, Ventilation and Pressurization Systems
2000-Series irect-ired Heating, Ventilation and Pressurization Systems imension and Selection uide 1.800.536.3461 www.rapidengineering.com N: 100% Outside ir Only 2000-Series Selection uide M (m 3 /h)
INSULATED CANTED ROOF CURB NON-PROPELLER PRODUCTS
INSULATED ANTED ROOF URB NON-PROPELLER PRODUTS Wood Nailer A 3" 3/4" 3" 1" Semi-Rigid Insulation Damper Shelf (Optional) (1) B OPTIONS: 1. Damper Shelf. 2. Metal Liner - solid or screen type. 3. Burglar
INSULATED CANTED ROOF CURB NON-PROPELLER PRODUCTS
INSULATED ANTED ROOF URB NON-PROPELLER PRODUTS Wood Nailer A OPTIONS: 1. Damper Shelf. 2. Metal Liner - solid or screen type. 3. Burglar bars - 1/2" dia. on 6" centers. 4. Finishes - baked or air-dried
CALEFFI. zone valves. Z series 01115/14 NA. Replaces 01115/11 NA. Function
Z series zone valves Function REGI STERE S EN ISO 900:000 ert. n FM 64 UNI LEFFI 0/4 N Replaces 0/ N Z-one valves are used to automatically shut-off the flow or redirect hot and chilled water in hydronic
Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Finish and special materials
Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Design Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and
Pages 2-3 Standard Straight Shank Holder. Pages 8-11 Speed & Feed Chart and Coolant Recommendations
pplication Index,,, 130 High Performance rill Pages 2-3 Standard Straight Shank Holder Pages 14-16,, F, G, H 130 High Performance rill and dapter (sold separately) Pages 4-7 Standard Taper Shank Holder
Model Model 815
Model 600004 Model 600204 Model 85387 Model 600104 Model 815 ir line products and accessories ir couplers and nipples............................... 196 low guns, tire inflators and siphon sprayers.............
CONTROL VALVES CONTROL VALVES BALL VALVES VBN2, VBN3 SERIES DESCRIPTION FEATURES SPECIFICATIONS
ONTROL VLVS LL VLVS VN2, VN SRIS SRIPTION The VN2 and VN Series are Honeywell's characterized flow, low torque, two- and three-way ball valves. They are designed to provide v ratings that closely match
SE Encore Multimount Worm Gear Speed Reducers
S ncore Worm ear Speed Reducers VILL IN 24 HOURS! Winuard lack poxy Coating System Quill Input daptor Solid Output Shaft(s) (Standard Diameter) Hollow Output Shafts (Max Standard ore) ushing Kits ase Kits
Piston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
Air Handlers Series. Direct-Fired Heating Pressurization. Dimension and Selection Guide
2000-Series ir andlers irect-ired eating Pressurization imension and Selection uide 1.800.536.3461 www.rapidengineering.com N: 100% OUTSI IR ONLY 2000-Series Selection uide IMPORTNT NOTS: ll information
Vacuum Relief Performance Curves
Vacuum Relief Valves Crispin Vacuum Relief Valves Valve Function llows air to enter system when vacuum occurs Prevents air exhaustion during pump start-up Features Cracks open to admit air at.25 PSIG differential
ISOMETRIC VIEW SCALE: 1/2
NOTS:.. THIS RWING SRIS TH UL xx SRIS LTRONI UL PUMP. UNLSS OTHRWIS SPII, LL VIWS R MOLS -c, -c OR -c. TURS INLU: - THR PHS RUSHLSS MOTOR WITH NOYMIUM MGNTS - INTGRT LTRONIS WITH SP ONTROL - WT MOTOR SIGN,
YSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
MTX and WPX Turbine Flowmeters
Principle of Operation Liquid enters the precision metering insert containing the turbine rotor. The liquid pressure drives the turbine rotor rate of rotation proportional to the volumetric flow rate.
TEMPERATURE REGULATORS W91/W94 Series
Self-Operated Temperature Regulators Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company Self-Operating Design Indicating
YARWAY BLOW-OFF VALVES SEATLESS, HARDSEAT AND UNIT TANDEM
YRWY LOW-OFF VLVS STLSS, HRDST ND UNIT TNDM Designed for blow-off service in boiler systems with pressures of 36 psig. FTURS GNRL LICTION low-off service in boiler systems to remove dirt, sediment and
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
Copper Axial Expansion Joint
For Technical Assistance and Sales Contact: FlexEJ Ltd Tel: +44 (0) 1384 881188 Email: sales@flexej.co.uk Fax: +44 (0) 1384 896875 Web: www.flexej.co.uk Section 4 Copper Axial Expansion Joint FlexEJ Small
HANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
ALUMINUM PUNKAH LOUVER
LUMINUM PUNK LOUVER 1/2" O.D. D -1/16" 3/16" Mounting ole Gasket - lear nodized - eavy Gauge luminum onstruction - White Powder oat - Stainless Steel ardware - Gloss lack Powder oat - Foam Gasket - Flat
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SPECIFICTIONS D08 Pattern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONTCT INFORMTION US Headquarters Dynex/Rivett
N2-GEN. TL SERIES Nitrogen Generators. Arc Suppression System. Transmission Line Pressurization. South-Tek
TL SERIES Nitrogen Generators Transmission Line Pressurization N2-GEN rc Suppression System www.southteksystems.com commercialsales@southteksystems.com 888.526.6284 South-Tek Systems 2 N 2 -GEN rc Suppression
3-Way Linked Globe Valve Assemblies with Linear Series Actuators
Linked Globe Valve ssemblies with Linear Series ctuators Note: hoose a valve assembly having a close-off pressure capability sufficient for the application. Not all valve body and actuator combinations
Combination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
ACCESSORIES 204 ACCESSORIES
ESSORIES E S S O R I E S rystal Fountains manufactures a select line of water feature accessories. From swivel units to help align spray nozzles to hydraulic fill valves, rystal Fountains manufactures
EXHAUST. Accessory Catalog and Specifications. Silex INNOVATIONS NGP032
EXHUST ccessory atalog and Specifications Silex INNOVTIONS NGP032 PSSIONTE OLLORTIVE INNOVTIVE TRUSTED EMPOWERED ENERGIZED World Headquarters 1560 Williams Drive Stoughton Wisconsin Stoughton, WI 53589
Lincoln installation components, accessories and lubrication fittings
Lincoln installation components, accessories and lubrication fittings People, capabilities and systems to save money and increase productivity Industry leader Continually satisfying our customers with
Series AIR LINE COMPRESSED AIR DISTRIBUTION SYSTEM
Series IR LINE COMPRESSED IR DISTRIUTION SYSTEM 26 IR LINE IR DISTRIUTION SYSTEM FETURES ND ENEFITS Installation ease: IR LINE installations can be carried out easily by the end-user, eliminating the need
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING. INCLUDE MANUALS: AF044X-XX Air Motor (pn 97999-1466) & S-632 General
Chain Hoists Lever Hoists Hoisting Assemblies Plate Clamps Girder Trolleys Girder Clamps Wire Rope Winches
hain Hoists Lever Hoists Hoisting ssemblies Plate lamps Girder Trolleys Girder lamps Wire Rope Winches 'S' Series hain Hoists apacities: 500kg to 50 tonnes Lightweight robust construction Super strength
Installation Components AirCare Air Preparation Systems
Care Preparation Systems Modular Line Filters 602104 602106 602108 * Transparent 602109 nylon liquid level indicator -18 lens. to 79 C Body Bowl Material icle Zinc Aluminum Zinc* Aluminum* Sintered Polypropylene
VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
Electronic Faucet 1500T & 1501T Series
Electronic Faucet 1500T & 1501T Series Specification: (example) Battery (4 cell) or Hardwire (24 V) infrared electronic handwash system H 2OPTIS technology no external adjustments required hrome plated
Medium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
Model 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).
Models, 3, and SME Section VIII, ir/steam/gas/liquid, UV National oard ertified. lso available for Vacuum Service. PED ertified for Non-Hazardous Gas. pplications ir/gas compressors - intercoolers - aftercoolers.
OSP. General Purpose Jacks - Plain Ram, Single Acting (Type - Spring Return) Features / Application Multipurpose jacks.
OSP General Purpose Jacks - Plain Ram, Single cting (Type - Spring Return) 5-400 ton Stroke 50-00 mm ax. Working Pressure 700 bar ultipurpose jacks Gland Nut designed to withstand dead end load ase mounting
Direct-Fired Heating, Ventilation and Pressurization Systems
2000-Series irect-ired Heating, Ventilation and Pressurization Systems imension and Selection uide 1.800.536.3461 www.rapidengineering.com N: 100% OUTSI IR ONLY 2000-Series Selection uide NOT: ll information
Process Equipment Catalog Pumping Solutions for Process Industries
Process Equipment atalog Pumping Solutions for Process Industries Table of ontents Process Equipment uyer s Guide ontents New Products... 2 Pump Model Overviews... 3 Pump Selection Key for ODD Pumps...