4900 Series Air Separators Standard & High Velocity

Transcription

1 Air Seperator - AS2, 3, 4 Air limination & ontrol 4900 Series Air Separators Standard & High Velocity Save money and lengthen the life of system pumps, piping, and components with the Taco 4900 Series air and dirt removal separators. The 4900 Series scrubber system is designed and constructed to ASM code, with technology proven in the field, around the world. Built with the quality and dependability that s made Taco famous for its performance and reliability Series internal PALL Ring basket assemblies have been developed with safety and ease of maintenance in mind. Patent# 5, 123, 938 Available with and without removable cover Taco atalog # Supersedes: 08/25/15 ffective ate: 01/20/17 Printed in USA

2 Features & Benefits -2- liminate bubbles and dirt in the system before they cause trouble. Air and dirt trapped in the system can produce major problems such as reduced heat transfer, loss of efficiency, pipe corrosion, pump damage, increased energy consumption, and irritating noise. The highly efficient Taco 4900 Series separator, now with optional removable covers, clears the system of microbubbles, sand, dirt, and rust to save money, energy, and component wear Series stainless steel PALL Ring baskets can be removed by one person. Unlike many competitive models each 4900 unit is designed and constructed to the requirements of Section VIII of the ASM code as standard. uropean PALL Ring technology. Taco ingenuity. The 4900 Series integral PALL ring technology has been proven in countless uropean installations. PALL rings are used in the processing industry to mix gases with, or separate gases from liquids. The use of PALL rings in hydronic air separation is so unique, it s patented. By applying PALL ring technology to air and dirt separation, the 4900 Series will: Remove microbubbles as small as 18 X 10-6 m (18 microns) from the system Remove air which has dissolved in the system s water Remove air from places where an air vent cannot be installed Remove and separate solid particles from the flow 2 PSI or less pressure drop at optimal flow rate* High efficiency cleaning of air and dirt. PALL ring technology has been used for many years in the processing industry. Taco s application of PALL rings to hydronic air and dirt separation is new to the HVA industry. While air bubbles are separated by the PALL rings through a process known as coalescence, dirt particles are actually caught and sifted to the bottom of the tank, where they can be removed through a blowdown valve. The 4900 Series provides higher efficiency, with reduced pressure drops, so a somewhat smaller pump may be used for maximum efficiency. When water is brought into contact with a PALL RIN, the stream is deflected in many directions. Microbubbles attach to the ring surface, by coalescence growing large enough to be separated. Large numbers of PALL rings in the 4900 Series yields virtually air-free system water. Removable over and Stainless Steel Pall Ring Basket Assembly Superior air bubble removal Series 4900-A models clean the system of free air and microbubbles; Series 4900-A models remove both air AN dirt from the hydronic system. 304 stainless steel screens are provided on the inlet/outlet of each separator to isolate the separator s internals from the hydronic system. A flushing cock allows for the cleaning of the PALL rings. A full port ball valve is provided at the bottom of the unit to permit blowdown of accumulated particles. While construction of both models differs somewhat, the PALL ring operating principle is the same. * See pages 13 & 14 for optimal flow rates.

3 -13- Standard Velocity Pressure rops US-ST FFTIV: MAY 12, " (4906) 8" (4908) 10" (4910) 12" (4912) 14" (4914) 16" (4916) 2" (4902) " (49025) 3" (4903) 4" (4904) 5" (4905) (PM) MOL 4.9 Per./Sec ,291 1,837 2,106 2, , ,673 4,561 5,300 6,346 10,262 14,905 (ft) (PSI) Standard Velocity 4900 Series Pressure rops onsult Factory for Models 4918 through 4936

4 High Velocity Pressure rops -14-8" (4908H) 10" (4910H) 12" (4912H) 14" (4914H) 16" (4916H) 6" (4906H) 2" (4902H) " (49025H) 3" (4903H) 4" (4904H) 5" (4905H) (ft) (PSI) (PM) MOL 4902H 49025H 4903H 4904H 4905H 4906H 4908H 4910H 4912H 4914H 4916H 4918H 4920H 4922H 4924H 4926H 4930H 4936H 11 Ft./Sec ,015 1,730 2,718 4,124 4,727 6,262 8,246 10,238 11,874 14,245 17,167 23,037 33,457 High Velocity 4900 Series Pressure rops onsult Factory for Models 4918 through US-HIH FFTIV: MAY 12, 2014

5 -15- Non-Removable over 4900 Series Air Separators, Non-Removable over (Submittal ) Pipe Size Model Number (1) A ia. B Max. ITM NO A-125 LOATION /4 42 MOL 22 NO. 35-1/4 35-1/4 QUANTITY PM 965 All dimensions shown are subject to change and should not be used for prepiping. ontact your local Taco representative should certified dimensional drawings be required. IFIATIONS esigned and constructed esigned and per constructed ASM ode per Section VIII iv. 1 ASM Section VIII, iv. 1 egistered with Registered the National with Board the National of Pressure Board Vessel anufacturers of Pressure Vessel Manufacturers tandard esign Pressure and Temperature: 125 Standard esign Pressure 0 F and Temperature: F onstruction: arbon Steel with exterior red oxide primer ish Optional esign Pressure and Temperature: (150 F Option Available) 4 Stainless Steel oalescence Pall Rings co 4900 units Particle are designed removal down to be to self-supporting 5 microns in the ping system. Factory onstruction: review arbon is necessary Steel with should any ping loads be exterior present. red oxide primer finish 304 Stainless Steel oalescence Pall Rings UTION: LIFTIN LUS FOR RIIN AN Taco 4900 units are designed to be TIN US ONLY, self-supporting NOT FOR in the piping ANHORIN system. OR NIN. Factory review is necessary should any piping loads be present. TORY INSTALL ir Vent is suitable AUTION: for water, LIFTIN max. LUS 50% FOR glycol RIIN AN LIFTIN US ONLY, NOT FOR lush Valve ANHORIN OR HANIN. TIONS FATORY INSTALL igher esign Pressures Air Vent is suitable and Temperatures for water, max. 50% glycol F, Flush Available Valve ( F, Standard) ptional System OPTIONS onnection Sizes available ptional onnection Types rooved Pipe Higher onnections esign Pressures up to and 16" Temperatures than F are available ptional Base Ring Add Suffix R (4905 Optional thru System 4916) onnection xp. 4912A-125R Sizes available Optional onnection Types - rooved Pipe onnections up to 21 2 S & IMNSIONS Optional Base Ring - Add Suffix R (4905 thru 4916) LIFTIN LU (2) APART (5" THRU 16") B PALL RINS dimensions shown are subject to change and should not be used for prepiping. tact your local Taco representative should certified dimensional drawings be required. 4 A F F ia. AIR VNT FLUSH VALV Surface Area (2) (Sq.Ft) (1) For 150 psi models, replace with -150 (2) OALSN (PALL RIN) SURFA ARA * imension for T option only SYSTM ONNTION OPTIONAL BAS RIN 4.9 Ft./Sec. OPTIONAL ROOV ONNTON TAIL VIW Approx. Wt. (LBS.) AT /2 12* 7-1/2 3-7/ A / /2 3-7/ / AT /2 12* 7-1/2 3-7/ / A / /2 3-7/ AT /8 14-1/2* 8-1/2 7-1/ A / /2 7-1/ A / /2 7-1/ A / / / A / / / A / / A / / / A / / / A /2 29-1/

6 Non-Removable over Series Air Separators, Non-Removable over (Submittal ) Pipe Size Model Number A ia. B Max. F ia. Surface Area* (Sq.Ft) 4.9 Ft./Sec. Approx. Wt. (LBS.) A / / / A /8 10-1/ / A / / A / / A / /4 13-1/ / A / / / A / / All dimensions shown are subject to change and should not be used for prepiping. ontact your local Taco representative should certified dimensional drawings be required. *OALSN (PALL RIN) SURFA ARA SPIFIATIONS esigned and constructed per ASM Section VIII, iv. 1 esigned and constructed per ASM ode Registered Section VIII with the iv. National 1 Board Registered of Pressure with Vessel the Manufacturers National Board of Pressure Standard Vessel esign Pressure Manufacturers and Temperature: Standard 150 PSI 240 FPressure and Temperature: F Particle Particle removal removal down down to to 5 microns onstruction: onstruction: arbon Steel with exterior arbon red Steel oxide with primer exterior finish 304 Stainless red oxide primer Steel finish oalescence Pall Rings 304 Stainless Steel oalescence Pall Rings AUTION: Taco 4900 LIFTIN units are designed LUS to FOR be self-supporting in the piping system. RIIN Factory AN review LIFTIN is necessary US should ONLY, any NOT piping FOR loads ANHORIN be present. OR HANIN. AUTION: LIFTIN LUS FOR RIIN AN LIFTIN US ONLY, NOT FOR ANHORIN OR HANIN. FATORY INSTALL FATORY INSTALL Air Vent Air is Vent suitable is suitable for for water, water, max. max. 50% glycol 50% glycol Blowdown Valve Blowdown Flush Valve Flush Valve OPTIONS Higher design pressures and temperatures OPTIONS -onsult factory Higher Base design Ring pressures Standard on and (4918 thru 4936) temperatures -onsult factory Base Ring Standard on (4918 thru 4936) AIR VNT LIFTIN LU (2) 180 APART B PALL RINS 4 A F BALL VALV 6 FLAN SYSTM ONNTIONS BAS RIN SIZS & IMNSIONS All dimensions shown are subject to change and should not be used for prepiping. ontact your local Taco representative should certified dimensional drawings be required.

7 Submittal ata Information 4900 Series Air Separator FFTIV: MBR 15, 2005 SUPRSS: OTOBR 1, 2003 JOB NINR ONTRATOR RP. ITM QUANTITY MOL NUMBR SIZ A AIR VNT LIFTIN LU (2) 180 APART (5" THRU 16") A AIR VNT PAKIN 1 2 " BALL VALV PAKIN 1 2 " BALL VALV B B SYSTM ONNTION SYSTM ONNTION F OPTIONAL BAS RIN (5" THRU 16") A SUFFIX R THRA ONNTIONS 4902AT THROUH 4903AT FLAN ONNTIONS 4902A THROUH 4916A WORKIN PRSSUR: F ( F OPTION AVAILABL) PIP SIZ MOL NUMBR A IA. (INH) B MAX. (INH) (INH) (INH) (INH) F IA. (INH) All dimensions shown are subject to change and should not be used for pre-piping. ontact your local Taco representative should certified dimensional drawings be required. o it Once. o it Right. Taco Inc., 1160 ranston Street, ranston, RI Telephone: (401) Fax: Taco (anada), Ltd., 6180 Ordan rive, Mississauga, Ontario L5T 2B3 Telephone: (905) Fax: (905) Visit our website at: (INH) APPROX. WT. (LBS) AT A AT A AT A A A A A A A A A esigned and constructed per ASM Section VIII iv. 1. Printed in USA opyright 2007 TAO, Inc.

8

9