Durco. Microfinish Ball Valve. The Best Standard Stem Seal In The Industry. Bulletin VM-60e (A4)
|
|
- Griffin Turner
- 5 years ago
- Views:
Transcription
1 P R E S E N T I N G T H E N E W urco Microfinish all Valve F O R H E M I A L S E R V I E S The est Standard Stem Seal In The Industry ulletin VM-6e (A4)
2 (VM-6e) Microfinish all Valve 8/2/2 7:35 AM Page 3 an K. Snelson VM-6e: urco Microfinish all Valves Offer Superior Stem Seal urco Microfinish ball valves take stem seal performance and durability to a new standard. The unique stem sealing system significantly enhances life cycle capability while Lockout evice Standard through 8 in (2 mm) valves. Gland Nut Along with belleville washers adjusts packing pressure to compensate for normal wear and temperature fluctuations. Stem Large diameter, 316SS blowout-proof stem standard on both carbon steel and stainless steel valves. Minimum ody avity Enhances performance in many services by minimizing media retention and process contamination. reducing turning torque. With the quality and performance you expect from Flowserve, these valves are becoming the standard of the PI. all Super smooth finish for low torque and long seat life. F8M/316SS is standard for both carbon steel and stainless steel valves. Anti-Static Elements all, stem and body are continuously grounded to eliminate static discharge. Grafoil is a registered trademark of Union arbide orporation 2 u Two-Piece Split-ody Valve shell and seats tested per ANSI criteria. Standard materials include W and F8M. ANSI lass 15 lb and 3 lb designs. ody design confines seats to minimize seat deformation at elevated temperature.
3 The est Standard Packing System In The Industry Removable Handle Increases flexibility, simplicity and security. ISO 5211 Mounting Flange Universal flange for easy, low cost actuation. ody Gasket PTFE standard. Grafoil used for firesealed applications. Seats urlon II standard for higher pressure and temperature applications. Optional virgin PTFE, carbon reinforced PTFE or Glass reinforced PTFE. Large Port Openings Maximize flow rates to meet or exceed competitive designs. Positive stem seal even after 1, cycles PTFE cup and cone packing for unsurpassed seal life and cyclability. Standard on valves through 8 in (2 mm) sizes Smooth stem finish reduces torque and increases stem seal life Glass filled PTFE thrust washer aids sealing while reducing torque elleville washers maintain constant load on cup and cone packing Stainless gland nut maintains packing compression through maximum operating temperature ouble stem positively indicates open or shut position efore Fire After Fire rco Fire-sealed design meets API 67, Fourth Edition criteria Metal seat at the port opening provides line seal in the event the PTFE seat burns away in a fire Stem moves up to make a metal-tometal seal all moves downstream to seal on metal seat Grafoil gasket forms the body seal Grafoil stem packing is standard for superior fire-sealed stem seal 3
4 (VM-6e) Microfinish all Valve 8/2/2 7:36 AM Page 5 an K. Snelson VM-6e: ost Effective Automated Valve Packages With Single Source Responsibility L ow torque urco Microfinish ball valves with ISO 5211 mounting flange require less expensive actuation equipment and Port iameter and Flow oefficient Valve Size in(mm) Flowserve offers unsurpassed flow rates for full bore valves and minimal flow loss for lower cost regular port valves. Regular Port Port ia. V in(mm) 1/2 (15).38 (9.5) 3/4 (2).5 (13) 1(25).75 (19) 1-1/2 (4) 1.25 (32) 2 (5) 1.5 (38) 3 (8) 2.25 (58) 4 (1) 3. (76) 6 (15) 4. (12) 8 (2) 6. (152) Life cycle stem seal testing results In comparative ball valve testing, urco Microfinish valves maintained stem seal integrity without packing adjustment after 1, cycles. That was up to five times more cycles than the best competitive valve could achieve. provide lower operating , Full ore Port ia. V in(mm).5 (13) 2.75 (19) 4 1. (25) (38) (5) (76) 1,1 4. (12) 2,2 6. (152) 5,2 8. (23)1, v values are estimated. onsult urco Technical Manual for accurate values. To obtain K v values: K v = v cost. Add to that the Stem Leakage Test Results unequaled stem seal life of ompetitor A these valves more than 1, cycles without stem YLES IN THOUSANS leakage and you have a best valve choice for your automated valve needs. URO MIROFINISH Actuation Flowserve manufactures a complete line of valve automation systems under the Automax brand, consisting of: SuperNova spring return and double acting rack and pinion actuators Stainless steel rack and pinion actuators EF (epoxy filled composite) rack and pinion actuators Test fluid was 6 F (16 ) water at 29 psi (2 bar). Each valve was fully pressurized while in the closed position; pressure was dumped to zero as valve opened. One cycle was counted each time the valve was turned open and then closed. For example, after 2, cycles the stem would have rotated 9 twice for a total of 4, rotations of 9. Heavy-duty (high torque) rotary actuators entura electric rotary actuators Apex modular positioning systems UltraSwitch limit switches Special control circuits Solenoid valves Actuator mounting kits and accessories
5 Actuator Sizing Torque Tables lass 15 Standard Glass/arbon Filled PTFE Seats Valve Port 1psi 285 psi Size Size In-lbs Nm In-lbs Nm 1/2 (15) F RP /4 (2) F RP (25) F RP /2 (4) F RP (5) F RP (8) F RP (1) F RP (15) F RP (2) F RP Note: These actuator sizing torque values are for clean clear service. F = Full ore RP = Regular Port Actuator Sizing Torques for Firesafe Valves* Valve Port 1 psi 285 psi Size Size In-Lbs Nm In-Lbs Nm 1/2 (15) F RP /4 (2) F RP * All other firesafe valve size torques may be found in the table above. As per generally accepted industry practice; if a valve is stroked once a: factor day or more 1. week or more 1.3 month or more 1.4 every four months 1.5 5
6 (VM-6e) Microfinish all Valve 8/2/2 7:36 AM Page 7 an K. Snelson VM-6e: ISO 5211 Mounting Flange imensions 4 Holes - G Tap ØA ØH ØE F K 1 in (25mm) thru 8 in (2mm) Full ore, ANSI lass 15, 2-Piece ody Valve Size ISO A Flange 1/2 (15) -- 3/4 (2) -- 1 (25) F4 E F H K L M G TAP.28 (7).65 (16.5).31 (8).2 (5) 1.42 (36) 1.89 (48) 1.3 (33) 2. (52) M5.41 (1.5).93 (23.5).47 (12).35 (9) 1.65 (42) 2.17 (55) 1.2 (31.5) 2.3 (59.5) M (3).41 (1.5).94 (23.8).12 (3).47 (12).35 (9) 1.65 (42) 1.69 (43) 1.5 (37.5) 2.6 (66.5) M6 1-1/2 (4) F (35).59 (15) 1.27 (32.3).12 (3).71 (18).55 (14) 1.97 (5) 1.89 (48) 2.3 (58.5) 3.1 (77.5) M6 2 (5) F (55).59 (15).12 (3).87 (22).67 (17) 2.76 (7) 2.64 (67) M (67) 2.7 (67.5) 3.8 (96.5) 1.85 (47) 2.1 (54) 3.6 (92) 3 (8) F (55).59 (15) 1.85 (47).12 (3).87 (22).67 (17) 2.76 (7) 4 (1) F (7).59 (15) 1.89 (48).12 (3) 1.8 (27.5).87 (22) 4.2 (12) 3.7 (94) 6 (15) F (85).87 (22) 2.3 (58.5).12 (3) 1.43 (36.2) 1.6 (27) 4.92 (125) 4.41 (112) 6.8 (171.5) 6.8 (171.5) M12 8 (2) F (1) 1.18 (3) 2.9 (73.7).16 (4) 1.77 (45) 1.42 (36) 5.51 (14) 5.12 (13) 7.9 (199.5) 7.9 (199.5) M (71) 4.3 (11) M8 M1 Regular Port, ANSI lass 15, 2-Piece ody Valve Size ISO A Flange E F H K L M 1.3 (33) 2. (52) 1/2 (15) (7).65 (16.5).31 (8).2 (5) 1.42 (36) 1.89 (48) 3/4 (2) (7).65 (16.5).31 (8).2 (5) 1.42 (36) 1.89 (48) 1.4 (35.5) 2.2 (55.5) M5 M5 1 (25) F (3).41 (1.5).93 (23.5).12 (3).47 (12).35 (9) 1.65 (42) 1.69 (43) 1.5 (39) 2.6 (65) M6 1-1/2 (4) F (35).59 (15) 1.27 (32.3).12 (3).71 (18).55 (14) 1.97 (5) 1.89 (48) 2.7 (68) 2.7 (68) M6 2 (5) F (35).59 (15) 1.27 (32.3).12 (3).71 (18).55 (14) 1.97 (5) 1.89 (48) 2.3 (59) 3.4 (87) 3 (8) F (55).59 (15) 1.85 (47).12 (3).87 (22).67 (17) 2.76 (7) 2.64 (67) 2.9 (73.5) 3.6 (9.5) M8 4 (1) F (55).59 (15) 1.85 (47).12 (3).87 (22).67 (17) 2.76 (7) 2.64 (67) M8 6 (15) F (7).59 (15) 1.89 (48).12 (3) 1.8 (27.5).87 (22) 4.2 (12) 3.7 (94) 4.3 (18.5) 4.2 (17.5) M1 8 (2) F (85).87 (22) 2.3 (58.5).12 (3) 1.43 (36.2) 1.6 (27) 4.92 (125) 4.41 (112) 4.6 (117) All dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. 6 G TAP 3.6 (91) 3.5 (9) 4.6 (117) M6 M12
7 Travel Stop.2" high 2 Holes - G Tap L M H K 1/2 in (15 mm) and 3/4 in (2 mm) only Full ore, ANSI lass 3, 2-Piece ody Valve Size ISO A E F H K L M G Flange TAP 1/2 (15) (7).65 (16.5).31 (8).2 (5) 1.42 (36) 1.89 (48) 2.2 (55.5) 2.2 (55.5) M5 3/4 (2) (1.5).93 (23.5).47 (12).35 (9) 1.65 (42) 2.17 (55) 2. (52) 2.7 (68) M6 1 (25) F (3).41 (1.5).94 (23.8).12 (3).47 (12).35 (9) 1.65 (42) 1.69 (43) 2.3 (57.5) 2.9 (72.5) M6 1-1/2 (4) F (35).59 (15) 1.27 (32.3).12 (3).71 (18).55 (14) 1.97 (5) 1.89 (48) 2.3 (59) 3.5 (89) M6 2 (5) F (55).59 (15) 1.85 (47).12 (3).87 (22).67 (17) 2.76 (7) 2.64 (67) 3.2 (8.5) 3.6 (9.5) M8 3 (8) F (7).59 (15) 1.89 (48).12 (3) 1.8 (27.5).87 (22) 4.2 (12) 3.62 (92) 4.2 (17) 4.6 (118) M1 4 (1) F (85).87 (22) 2.3 (58.5).12 (3) 1.43 (36.2) 1.6 (27) 4.92 (125) 4.41 (112) 4.3 (18) 5.2 (133) M12 6 (15) F (1) 1.18 (3) 2.9 (73.7).16 (4) 1.77 (45) 1.42 (36) 5.51 (14) 5.12 (13) 5.9 (151) 7. (178) M16 8 (2) F (13) 1.18 (3) 3.35 (85).2 (5) 2.2 (56) 1.81 (46) 6.5 (165) 6.14 (156) 6.2 (158.5) 1.3 (26.5) M2 Regular Port, ANSI lass 3, 2-Piece ody Valve Size ISO A E F H K L M G Flange TAP 1/2 (15) (7).65 (16.5).31 (8).2 (5) 1.42 (36) 1.89 (48) 2.1 (53) 2.3 (57.5) M5 3/4 (2) (7).65 (16.5).31 (8).2 (5) 1.42 (36) 1.89 (48) 2.2 (56) 2.5 (64) M5 1 (25) F (3).41 (1.5).93 (23.5).12 (3).47 (12).35 (9) 1.65 (42) 1.69 (43) 2.4 (6) 2.8 (7) M6 1-1/2 (4) F (35).59 (15) 1.27 (32.3).12 (3).71 (18).55 (14) 1.97 (5) 1.89 (48) 2.3 (59) 3.5 (89) M6 2 (5) F (35).59 (15) 1.27 (32.3).12 (3).71 (18).55 (14) 1.97 (5) 1.89 (48) 3.4 (85.5) 3.4 (85.5) M6 3 (8) F (7).59 (15) 1.89 (48).12 (3) 1.8 (27.5).87 (22) 4.2 (12) 3.7 (94) 4.4 (113) 4.4 (113) M1 4 (1) F (7).59 (15) 1.89 (48).12 (3) 1.8 (27.5).87 (22) 4.2 (12) 3.7 (94) 5. (128) 4.4 (113) M1 6 (15) F (85).87 (22) 2.3 (58.5).12 (3) 1.43 (36.2) 1.6 (27) 4.92 (125) 4.41 (112) 6.5 (164) 6.5 (165) M12 8 (2) F (1) 1.18 (3) 2.9 (73.7).16 (4) 1.77 (45) 1.42 (36) 5.51 (14) 5.12 (13) 6.6 (168.5) 6.6 (167.5) M16 All dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. 7
8 (VM-6e) Microfinish all Valve 8/2/2 7:36 AM Page 9 an K. Snelson VM-6e: Pressure/Temperature Ratings ANSI lass 15-2-Piece esign PTFE Seats ANSI lass 15-2-Piece esign Glass or arbon Reinforced PTFE and urlon II 3 (21) 3 (21) 275 (19) 275 (19) W W 25 (17) 25 (17) F8M 225 (16) F8M 225 (16) 2 (14) 2 (14) 6in(15mm) - 8in(2mm)F 8in(2mm) RP Pressure - PSI (bar) Pressure - PSI (bar) urco Microfinish valves offer a choice of seats. hoose the seat material that best meets your application needs. Replace seats easily to suit changing process conditions. Virgin PTFE for optimum chemical resistance Glass or carbon reinforced PTFE for high pressure/ temperature applications 175 (12) 2in(5mm) - 3in(75mm)F 2 1/2in(65mm) - 4in(1mm) RP 15 (1) 125 (9) 4in(1mm) F 6in(15mm) RP 6in(15mm) - 8in(2mm)F 8in(2mm) RP 175 (12) 4in(1mm) F 6in(15mm) RP 15 (1) 125 (9) 2in(5mm) - 3in(75mm)F 2 1/2in(65mm) - 4in(1mm) RP 1 (7) 1 (7) 1/2in(15mm) - 1 1/2in(4mm)F 1/2in(15mm) - 2in(5mm) RP 75 (5) 75 (5) 5 (3) 5 (3) 25 (2) 25 (2) 1/2in(15mm) - 1 1/2in(4mm)F 1/2in(15mm) - 2in(5mm) RP 1 (38) 15 (66) 2 (93) 25 (121) 3 (149) 35 (177) 4 (24) 1 (38) 15 (66) 2 (93) 45 (232) ANSI lass 3-2-Piece esign Glass or arbon Reinforced PTFE and urlon II 8 (55) 8 (55) 75 (52) 75 (52) W W 7 (48) 65 (45) 65 (45) F8M 6 (41) F8M 6 (41) 55 (38) 55 (38) 5 (34) 1/2in(15mm) - 3/4in(2mm)F 1/2in(15mm) - 1in(25mm) RP 45 (31) 4 (28) 35 (24) 1in(25mm) - 2 1/2in(65mm)F 1 1/4in(35mm) - 3in(75mm) RP Pressure - PSI (bar) Pressure - PSI (bar) 35 (177) 4 (24) ANSI lass 3-2-Piece esign PTFE Seats 7 (48) 5 (34) 1/2in(15mm) - 3/4in(2mm)F 1/2in(15mm) - 1in(25mm) RP 45 (31) 4 (28) 1in(25mm) - 2 in(5mm)f 1 1/4in(35mm) - 2 1/2in(65mm) RP 35 (24) 3 (21) 3 (21) 25 (17) 25 (17) 2 (14) 2 (14) 3in(75mm) - 4in(1mm)F 4in(1mm) - 6(15mm) RP 15 (1) 2 1/2in(65mm) - 4in(1mm)F 3in(75mm) - 6(15mm) RP 15 (1) 1 (7) 1 (7) 6in(15mm) - 8in(2mm)F 8in(2mm) RP 5 (3) 1 (38) 15 (66) 2 (93) 6in(15mm) - 8in(2mm)F 8in(2mm) RP 5 (3) 25 (121) Temperature - F ( ) 8 25 (121) 3 (149) Temperature - F ( ) Temperature - F ( ) 3 (149) 35 (177) 4 (24) 1 (38) 15 (66) 2 (93) 25 (121) 3 (149) 35 (177) Temperature - F ( ) 4 (24) 45 (232)
9 Valve Standards, onstruction and Materials Standards Applicable To urco Microfinish all Valves ANSI esign and testing ANSI 16.1 Short pattern face-toface dimensions ANSI 16.5 Pipe flanges and flanged fittings MSS-SP72 esign MSS-SP25 Valve identification marking API 67, Fourth Edition Fire sealed design ISO Actuator mounting flange 1/2 in (15 mm) 1-1/2 in (4 mm) ANSI lass 15 and in (5 mm) 8 in (2 mm) ANSI lass 15 and b A Item Part Valve Alloy No. escription Stainless Steel arbon-stainless Steel Remarks 1 ody F8M W 2 Tailpiece F8M W 3 all F8M/316 SS F8M/316 SS 4* Seat urlon II urlon II 5* ody Seal Virgin TFE Virgin TFE Grafoil for Firesealed 6 ody Stud Grade 8 lass 2 Grade 7 7 ody Nut Grade 8 Grade 2H 8 Stem 316 SS 316 SS 9* Stem Washer Glass Filled TFE Glass Filled TFE 1* Stem Seal Virgin TFE Virgin TFE Grafoil for Firesealed 11 Gland 316 SS 316 SS 12 Gland Nut 34 SS 34 SS 2 in (5mm) R and smaller 12A heck Nut 34 SS 34 SS 2 in (5mm) F and larger 12 Lever Nut 34 SS arbon Steel Plated 2 in (5mm) R and smaller 13 Adapter uctile Iron uctile Iron 2 in (5mm) F and larger 13 Lever arbon Steel arbon Steel 2 in (5mm) R and smaller 14 Antistatic ody Spring 34 SS 34 SS 15 Antistatic Stem Spring 316 SS 316 SS 2 in (5mm) F and larger 16 Antistatic Plunger 316 SS 316 SS 2 in (5mm) F and larger 17 Spring isc 34 SS 34 SS 18 Lock Strip 34 SS 34 SS 2 in (5mm) R and smaller 19 heck Nut olt Grade 8 Grade.8 2 in (5mm) F and larger 2 Locking Plate 22 SS 22 SS 1 in (25mm) F and larger 2-Piece 21 Stopper olt Stainless Steel Stainless Steel 1 in (25mm) F and larger 2-Piece 22 ushing Stainless Steel Stainless Steel 1 in (25mm) F and larger 2-Piece 23 Metal Tag 22 SS 22 SS 24 Adapter Pipe arbon Steel arbon Steel 2 in (5mm) F and larger 25 Adapter olt arbon Steel arbon Steel 2 in (5mm) F and larger 26 Adapter Washer arbon Steel arbon Steel 2 in (5mm) F and larger * Recommended spare parts. 9
10 (VM-6e) Microfinish all Valve 8/2/2 7:36 AM Page 11 an K. Snelson VM-6e: urco Microfinish all Valves imensions Full ore, ANSI lass 15, 2-Piece ody Valve Size A Weight lbs (kgs) 1/2 (15) 3/4 (2) 1 (25) 1-1/2 (4) 2 (5) 3 (8) 4 (1) 6 (15) 6S (15) 8 (2) 8S (2) 4.25 (18) 4.61 (117) 5. (127) 6.5 (165) 7.1 (178) 7.99 (23) 9.2 (229) 15.5 (394) 1.51 (267) 18. (457) 11.5 (292).5 (13).75 (19) 1. (25) 1.5 (38) 2. (51) 3. (76) 4. (12) 6. (152) 6. (152) 8. (23) 8. (23) 3.27 (83) 3.98 (11) 4.13 (15) 4.72 (12) 5.83 (148) 6.57 (167) 7.91 (21) 1.47 (266) 1.47 (266) (38) (38) 7.24 (184) (32) (482) (592) 3.71 (78) 3.71 (78) (9) (9) 3.5 (1.6) 5.3 (2.4) 6.8 (3.1) 12.6 (5.7) 22.1 (1.) 43.4 (19.7) 76.3 (34.6) (65.) (65.) (17.) (17.) Short pattern Full ore, ANSI lass 3, 2-Piece ody Face-to-face dimensions meet ANSI 16.1 design criteria. Flange dimensions, finish and drillings are to ANSI 16.5 pipe flanges and flanged fittings. All dimensions are approximate and for illustration purposes only. For exact dimensions request certified dimensional prints. Valve Size A Weight lbs (kgs) 1/2 (15) 3/4 (2) 1 (25) 1-1/2 (4) 2 (5) 3 (8) 4 (1) 6 (15) 8 (2) 5.51 (14) 5.98 (152) 6.5 (165) 7.48 (19) 8.5 (216) (283) 12.1 (35) (43) (52).5 (13).75 (19) 1. (25) 1.5 (38) 2. (51) 3. (76) 4. (12) 6. (152) 8. (23) 3.27 (83) 3.98 (11) 4.13 (15) 4.72 (12) 5.83 (148) 7.2 (183) 9.2 (229) (345) (44) 7.24 (184) 12.9 (37) (592) 3.71 (78) (9) (1) 6.2 (2.8) 8.8 (4.) 11. (5.) 22.1 (1.) 33.1 (15.) 68.4 (31.) (52.) (15.) (221.) Regular Port, ANSI lass 15, 2-Piece ody Valve Size A Weight lbs (kgs) 1/2 (15) 3/4 (2) 1 (25) 1-1/2 (4) 2 (5) 3 (8) 4 (1) 6 (15) 8 (2) 4.25 (18) 4.61 (117) 5. (127) 6.5 (165) 7.1 (178) 7.99 (23) 9.2 (229) 1.51 (267) 11.5 (292).38 (9.5).5 (13).75 (19) 1.25 (32) 1.5 (38) 2.25 (58) 3. (76) 4. (12) 6. (152) 3.27 (83) 3.27 (83) 3.98 (11) 4.61 (117) 4.72 (12) 6.6 (154) 6.57 (167) 7.91 (21) 1.47 (266) 7.24 (184) 7.24 (184) (482) (482) (592) 3.71 (78) 2.9 (1.3) 4.4 (2.) 6. (2.7) 11.5 (5.2) 17.2 (7.8) 36.8 (16.7) 57.8 (26.2) 9.4 (41.) (82.7) Regular Port, ANSI lass 3, 2-Piece ody 1 Valve Size A Weight lbs (kgs) 1/2 (15) 3/4 (2) 1 (25) 1-1/2 (4) 2 (5) 3 (8) 4 (1) 6 (15) 8 (2) 5.51 (14) 5.98 (152) 6.5 (165) 7.48 (19) 8.5 (216) (283) 12.1 (35) (43) 16.5 (419).38 (9.5).5 (13).75 (19) 1.25 (32) 1.5 (38) 2.25 (58) 3. (76) 4. (12) 6.` (152) 3.27 (83) 3.27 (83) 3.98 (11) 4.61 (117) 4.72 (12) 6.69 (17) 7.2 (183) 9.2 (229) (345) 7.24 (184) 7.24 (184) (492) (592) 3.71 (78) (9) 5.5 (2.5) 7.7 (3.5) 9.9 (4.5) 2.9 (9.5) 25.4 (11.5) 56.2 (25.5) 91.5 (41.5) (7.) (121.)
11 How To Specify urco Microfinish all Valves Size Model End Top Options Materials Valve Size 1/2 in (15mm).5 3/4 in (2mm).75 1 in (25mm) 1 1-1/2 in (4mm) in (5mm) 2 3 in (8mm) 3 4 in (1mm) 4 6 in (15mm) 6 6S* (15mm) 6S 8 in (2mm) 8 8S* (2mm) 8S all Full Regular Type ore F R Model 2-Piece 2 Pressure lass End onnection Flanged End Options Flange Face Raised Grooved F R Operator are Lever L Gear G Lock Gear K hainwheel Oval Handwheel V Special Q Stem Seal PTFE T Grafoil G Options None X Special leaning S Firesealed Z Special Fasteners F Other Q ody Material W F8M 6 all Material 316 SS/F8M 6 Stem Material 316 SS 6 Seat Material PTFE T Glass Filled PTFE G arbon Filled PTFE urlon II Short pattern ANSI lass 15 lb full port only, Installation, Operation and Maintenance Although Flowserve can, and often does, provide general guidelines, it is obviously not possible to provide application specific data and warnings for all conceivable applications. The purchaser/end user must therefore assume the ultimate responsibility for the proper selection, installation, operation and maintenance of the products. Read the appropriate IOM available from ookeville, TN 3851 before installing, operating or repairing any valve. The purchasers/end user should train its employees and/or contractors in the safe use of the Flowserve products in connection with the purchaser s manufacturing processes. esign hanges In order to follow Flowserve s commitment to continuous improvement, we reserve the right to change product and performance specifications without notice. 11
12 Flowserve has the answer to your corrosion resistant, quarter-turn valving needs. lockwise from top right. urco TV-2 PTFE or UHMWPE lined chemical service valve Atomac Lined ball valves ANSI/ISO, standard and full port Specialty valves Valve products and accessories urco Sleeveline Non-lubricated, PTFE-sleeved plug valves G4 Isolation G4E IN Mounting Pad G4 Marathon TSG4 Severe Service urco T-Line Non-lubricated, PTFE-lined plug valves ig Max utterfly High performance valves urco Microfinish Alloy ball valves Automax Valve automation systems Actuators ontrols with smart technology Accessories For more information, contact: Flowserve orporation Flow ontrol ivision 1978 Foreman rive ookeville, Tennessee 3851 Phone: Fax: Or onsult Your Local Stocking istributor Flowserve Ahaus GmbH Von raun Straße 19a Ahaus Germany Phone: Fax: Flowserve Pte. Ltd. 12 Tuas Avenue 2 Republic of Singapore Phone: Fax: Printed in U.S.A. April 22 Flowserve orporation
Durco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d
P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves
More informationT-Line Valve NEW. Stainless Steel Armor Available. Bulletin VT-17z. Quality System Certificate
T-Line Valve T - 4 A N D T - 4 3 P L U G V A L V E S NEW Stainless Steel Armor Available Quality System Certificate Bulletin VT-7z T-Line Chemical Service Valve Features These features have made Durco
More informationServing Refineries Around The World
Serving Refineries Around The World Durco Sleeveline Valves For Alkylation Service Quality System Certificate Bulletin V-25m (E) Durco G4Z-HF Alkylation Valves Phillips Licensing Listed and UOP Process
More informationAtostar. For Clean Production And A Clean Environment. FCD ATETB (Bulletin VA-11 [E/A4]) Quality System Certificate
Atostar S T A I N L E S S S T E E L, F L U O R C O P O L Y M E R L I N E D B A L L V A L V E S A S M E D I N J I S For Clean Production And A Clean Environment Quality System Certificate FCD ATETB0011-00
More informationSize Range: Body Material: Features:
C O O SVF Flow Controls I N C O R P O R A T E 13560 Larwin Circle Santa Fe Springs, CA 90670 800.783.7836 Fax: 562.802.3114 Sales@SVF.net www.svf.net SERIES 41, 41 & 42 FLANGE ALL VALVES API 607 4T EITION
More informationflowserve.com Durco PlugSeal Valve ASME Class 600 Plug Valves Serving the Worldwide Desalination Industry Experience In Motion
flowserve.com Durco PlugSeal Valve ASME Class 600 Plug Valves Serving the Worldwide Desalination Industry Experience In Motion To Access Literature On-line More information about FLOWSERVE products can
More informationT-41/T-43 and ST-41/ST-43
Installation, Operation and Maintenance T-41/T-43 and ST-41/ST-43 P T F E - L I N E D V A L V E S The No. 1 Lined Valve in the CPI Quality System Certificate Bulletin V-171c FOREWORD Flowserve Corporation,
More informationMARPAC K SERIES. Full Bore Fire Safe Flanged Ball Valves
MARPAC K SERIES Full Bore Fire Safe Flanged Ball Valves The Flowserve Marpac flanged full bore valve range provides customers with specification compliant product with long service free life resulting
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive alignment
More informationKF Series FA Ball Valves
KF Series FA all Valves Superior Fluid ontrol Products for the Petrochemical and Industrial Markets Series FA all Valves This high quality two-piece split body trunnion mounted ball valve conforms to API
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationOne and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
More informationA single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping
single KTM -Way ball valve replaces several -Way saving valuable space and simplifying piping Features Positive alignment of body low out-proof stem Sphericity tolerance of the ball is unsurpassed Reinforced
More information2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
More informationTri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port. McCANNA/MARPAC Valves RO400-R4
RO400-R4 AN ISO 9001 REGISTERED COMPANY Tri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port MARPAC by McCANNA Tri-Pac E325/E525 Ball Valves DESIGN FEATURES
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationKTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
More informationNAF Duball DL Pocket Ball Valves TECHNICAL BULLETIN FCD NFENTB A4 11/17
NAF Duball DL Pocket Ball Valves TECHNICAL BULLETIN FCD NFENTB463-00-A4 /7 NAF Duball DL Pocket Ball Valves FCD NFENTB463-00-A4 /7 Primary characteristics The NAF Duball DL Pocket Valve is the pulp and
More informationWORCESTER CONTROLS F519/529/819/829. Full Bore Fire Safe Flanged Ball Valves
WORCESTER CONTROLS F519/529/819/829 Full Bore Fire Safe Flanged Ball Valves The Flowserve Worcester flanged full bore valve range provides customers with specification compliant product with long service
More information505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
More informationG4E EUROPA Sleeveline
G4E EUROPA Sleeveline CHEMICAL SERVICE VALVE The New Standard For Performance Quality System Certificate Bulletin V-23c (E) Experience In Motion Durco G4E Europa Valves Provide Bubble Tight Shutoff and
More information3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
More informationBall Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
More informationDM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
More informationBULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
More informationG Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
More informationSHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More informationTM SERIES Engineered Valves For Pipeline Service Application
Tech Bulletin Page 0-1 Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt
More informationKTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationFLANGED 150 & 300 FULL PORT BALL VALVES
FLANGED 150 & 300 FULL PORT BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED STEEL BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 25A 25J 402 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL
More informationControl Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
More informationTECHNICAL BULLETIN. Audco Ball Valve. Reduced Bore Fire safe Flanged Ball Valves 51/52 Series. Experience In Motion
Audco Ball Valve Reduced Bore Fire safe Flanged Ball Valves 51/52 Series TECHNICAL BULLETIN Experience In Motion With the Series 51/52 designed to BS EN ISO 17292 / API 6D, AUDCO brings to the market a
More informationF20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
More informationBushing Viton O-ring (Other material available) Anti-Static Device
API 607-6th Edition Triac unibody flanged ball valves feature a high quality investment cast body and end. They are available in 1/2 through 6 regular port. Superior leak protection is accomplished by
More informationDurco Big Max BX2001 Valve
Flowserve has the answer to your corrosion resistant, quarter-turn valving needs. Durco Big Max BX2001 Valve A N S I C L A S S 1 5 0 L B. V A L V E S Clockwise from top right. BTV-2000 PTFE or UHMWPE lined
More informationCSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
More informationFLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
More informationCLASS 150 & 300 REDUCED BORE BALL VALVES
CLASS 150 & 300 REDUCED BORE BALL VALVES AGA - APPROVED MANUAL & AUTOMATIC FLANGED BALL VALVES - EMICO FIGURE NUMBERING SYSTEM E A 503 507 F C X EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL A:
More informationDRAFT August 12, :56 PM
DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection
More informationSECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES
SECTION S DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES DESCRIPTION STANDARD COMPLIANCE/CERTIFICATIONS S-2 ADVANTAGES S-3 PAGE SOFT SEAT EXPLODED VIEW S-4 FIRE SAFE SEAT EXPLODED VIEW S-5 METAL SEAT
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationHP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES
BFV-2 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Rev. 09/09 HP-SERIES HIGH PERFORMANCE BUTTERFLY VALVES Now you can turn high pressure applications into low risk decisions by turning to high performance
More informationHigh Performance Butterfly Valves
Tech Bulletin Page 500-11 MAX SEAL HP SERIES High Performance Butterfly Valves Available with Soft and Metal Seating MODEL BL630 Size Range 2 thru 24, optional thru 120 ANSI Class 150//600/900 20 Lug 6
More informationSECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS. Standard Compliance/Certifications S-2 Advantages S-3
SECTION S - DOUBLE OFFSET HIGH PERFORMANCE BUTTERFLY VALVES TABLE OF CONTENTS DESCRIPTION Standard Compliance/Certifications S-2 Advantages S-3 PAGE Soft Seat Exploded View S-4 Fire Safe Seat Exploded
More informationFSB 35 Fire-Safe FIRE-SAFE ANTI-STATIC
FSB 35 Fire-Safe 0035 FIRE-SAFE ANTI-STATIC /6/EU SAFETY 2 FSB 35 Strong & Reliable (A) ISO52 Actuator Direct Mount Square stem and twin ISO 52 pattern mounting pad allow for easy actuator installation
More informationWorcester Controls Directional Ball Valves
Worcester Controls Directional Ball Valves Series D44/D4, Series D51, Series 18/19 Experience In Motion Page 2 Series D44/D4, ½ " 2" Bottom Entry Page 6 Series D51, 2" 8" Bottom Entry Page 9 Series 18/19,
More informationItem 513F. 3/4 Way High Pressure Ball Valve ASME600, 900 & 1500 SIZE: 1/2"-2"
Item 53F 3/ Way High Pressure Ball Valve ASME600, 900 & 0 : /"" ZIPSON'S 53F, 3600 psi, 3/ way high performance flanged ball valve was designed for the high pressure industrial pipe line. With T//X/Iport
More informationOrder code information
3 Piece Threaded High Pressure Fire-Safe all Valves Order code information 1.1 3 piece threaded fire-safe ball valves ody Rating Shell Material Valve ore nd onnection Trim Material Firesafe Seat & Seal
More informationItem 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
More informationTECHNICAL BULLETIN. Valdisk TX3 Triple Offset Butterfly Control Valve. Experience In Motion FCD VLENTB A4 1/16
TECHNICAL BULLETIN Valdisk TX3 Triple Offset Butterfly Control Valve FCD VLENTB0061-00-A4 1/16 Experience In Motion Contents Triple Offset Butterfly Valve 3 Product Specifications 3 About Triple Offset
More informationSpecial Alloy Ball Valves
www.swagelok.com Special Alloy Ball Valves 60 Series 3/8 to 1 in. sizes Alloy 625, alloy 825, alloy 2507 super duplex stainless steel, and 6-moly materials On-off (2-way) valves Compensating seat design
More informationFisher Control-Disk Valve NPS 14-24
Control-Disk NPS 14-24 Valve Product ulletin Fisher Control-Disk Valve NPS 14-24 The Fisher Control-Disk valve provides outstanding performance under extreme pressure and temperature conditions. The Control-Disk
More informationPatented S2 TM Stem Seal. Dual Body Seal. Fugitive Emissions Control.
Patented S TM Stem Seal s Dual Body Seal Fugitive Emissions Control Antistatic electrical continuity between ball, stem, and body. Locking washer Blowout proof stem. Live loaded packing assures reliable
More informationKTM Jacketed Ball Valves Full bore and Reduced bore
KTM jacketed ball valve, designed with full flange to flange welded jacket, to effectively maintain the temperature of the media Features General applications Temperature-dependent viscosity fluid: heavy
More informationHigh Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
More informationDurco T4E Lined Plug Valves Fluoropolymer Lined Valves
flowserve.com Durco T4E Lined Plug Valves Fluoropolymer Lined Valves Experience In Motion 1 History Flowserve Durco T4E valves have been designed and developed with the latest technology and are the most
More information2WE30/5WE30: WOG - Stainless Steel Ball Valve 2-Piece NPT Ends Stainless Steel Full Port Direct Mount Actuation Design
2WE30/5WE30: 2000-1500 WOG - Stainless Steel Ball Valve 2-Piece NP Ends Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description Item # Figure Design Parameters Mount
More informationSeries 51/52 Flanged Ball Valves Standard and Anti-Static Valves in ANSI Class 150 and 300. Worcester Controls. FCD WCABR (Part PB 51)
FCD WCABR03-0 (Part PB 5) AN ISO 900 REGISTERED COMPANY Series 5/52 Flanged Ball Valves Standard and Anti-Static Valves in ANSI Class 50 and 300 Series 5/52 Flanged Ball Valves Designed to Automate, Control,
More information,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
More informationValves and Valve Assemblies
Valves and Valve A-T Controls, Inc. Valves and valve assemblies for liquid and gas shut-off These assemblies are FM approved for use in applications requiring protection for fuel burning equipment per
More informationValtek Valdisk 150. Valtek Valdisk 150. Control Valves. Flowserve Corporation, Valtek Control Products, Tel. USA
Control Valves Flowserve Corporation, Valtek Control Products, Tel. USA 801 489 8611 1 Control Valves Available in wafer or lug-style body Self-centering seat Blowout protection increases safety Compact,
More informationSeries 50 Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features ASME B6.34 Design Full port, split body design
More informationEvans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
More informationHIGH PERFORMANCE BUTTERFLY VALVE
Revised 11/17/2017 HIGH PERFORMANCE BUTTERFLY VALVE LCS-6822 (Class 150) LCS-7822 (Class 300) APPLICATIONS Ideally suited for commercial, industrial, and mechanical HVAC services. Use in other applications
More informationSpring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.
Spring Return and ouble cting Pneumatic Quarter- Turn ctuators For Output Torques to 13,444 lb.in. Features and benefits ompact rack and pinion design utilizes the whole piston area to develop output torque.
More information9800 Series. Metal to Metal Trunnion Ball Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STNRS PI 6 certified SM / NSI 16.10 PI 6F, PI 607, 4th dition Wall thickness complies to 16.34 esigned to SM / NSI 16.5, 16.10, 16.34, 31.1, 31.4 and 41.8 standards N MR 0175 compliance 9800 Series Metal
More informationV Series Control Port Ball Valves
Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard
More informationISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
More informationNorth. Asia. America. Africa. South. America. Australia. Double Block and Bleed Dual Expanding Plug Valve
North merica Netherlands Europe sia frica South merica ustralia ouble lock and leed ual Expanding Plug Valve CERTIFICTES E X E CUT IO NS V Standard Execution 35 33 7 13 11 6 21 56 12 30 2 7 32 17 23 5
More informationSeries EPDM Seat. Ductile Iron Body, 316 SS, Lug Type Butterfly Valve. Lug-EPDM
Series 600 - EPM Seat Lug Type backed EPM seats. Accompanied by a precision machined 316 SS disc, it offers low operating torque, Lug-EPM Model 600 Series s are epoxy coated with extended neck which makes
More informationLCS6822 (Class 150) LCS7822 (Class 300)
Revision 8/22/2012 high performance butterfly valve LCS6822 (Class 150) LCS7822 (Class 300) APPLICATIONS Ideally suited for Commercial, Industrial and Mechanical HVAC Services. Use in other applications
More informationSeries 35 Direct Mount 3-Piece Full Port Ball Valves
Series 35 Direct Mount 3-Piece Full Port Ball Valves ¼ 4 (DN8 DN100) 1000 psi (PN64) 0035 20/68/EU SAFETY 2 Series 35 Ball valves feature direct mount DIE ERSTE s Series 35 ball valves feature direct mount
More informationValves & Flow Control Components Valves & Flow Control Components
Section 4 Valves & Flow ontrol omponents Valves & Flow ontrol omponents... 106 SJ-200 Low-Profile utterfly Valve... 107 SJ-300N utterfly Valve... 108 SJ-300F utterfly Valve (for Fire Protection)... 110
More informationPBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
More informationDM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS
DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve
More informationTECHNICAL BULLETIN. NAF Trunnball DL Ball Valves. Experience in Motion FCD NFENTB A4 09/14
NAF Trunnball DL Ball Valves FCD NFENTB468-00-A4 09/4 TECHNICAL BULLETIN Experience in Motion Primary Characteristics The NAF Trunnball DL is a full-bore trunnion-mounted ball valve, developed by Flowserve
More informationWhat's in a ball valve?
Ball valves What's in a ball valve? An efficient and reliable process demands quality products. This includes the important function of flow isolation. If inferior products are used, breakdowns and expensive
More informationButterfly valves. SIL safety. SALES SERVICE +358 (0) DOUBLE ECCENTRIC
SALES SERVICE +358 (0)17 262 3555 info@econosto.fi Butterfly valves OUBLE ECCENTRIC butterfly valves are specifically designed for high demanding applications where the valve performance is critical. Available
More informationHIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES
FEATURES AND BENEFITS Wafer & Lugged bodied butterfly valves for bi-directional use Dead end service are offered as standard in full ANSI Class and ratings (for lugged design only) The design of double
More informationBall Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
More information771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The
More informationPower-Seal High Performance Butterfly Valve: Series P1 Installation & Maintenance Manual
CAUTION: 1. For your safety read this manual completely before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved, and any hazardous fluids
More informationWorcester Controls F819/829. Full Bore Firesafe Flanged Ball Valves
Worcester Controls F819/829 Full Bore Firesafe Flanged Ball Valves With the Series 819/829 designed to BS EN ISO 17292, Flowserve Worcester Controls brings to the market a full bore valve which combines
More informationBRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
More informationHIGH PERFORMANCE BUTTERFLY VALVE
Figure HPA BUTTERFLY VALVES Features: Bi-directional Bubble-tight Shutoff Suitable for Saturated Steam Service to 150 PSI Angled Disc Available in Wafer (3 to 12 ) or Lug (3 to 24 ) Stocked in Carbon by
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationMADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
More informationFisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
More informationStandard Product Range
Standard Product Range Standard Pressure onnection Nominal size inch Product code mm ASME 150/200 psi Wafer Lugged 1 150/200 DJ 1 150/200 DJL Standard Product Range EN PN10 PN16 PN25 Wafer Lugged Wafer
More informationTECHNICAL BULLETIN. Valtek ShearStream SB Control Valves. Segmented V-port Ball Valves. Experience In Motion VLEETB
TECHNICAL BULLETIN Valtek ShearStream SB Control Valves Segmented V-port Ball Valves VLEETB4152-03 11.02 Experience In Motion Primary characteristics ShearStream SB is a ball sector valve with metal-to-metal
More informationBULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting
More information30E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design
3E1: ASME lass 3 - Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description 2 Piece ASME 3 Stainless Steel Ball Valve
More informationTECHNICAL BULLETIN. NAF Duball DL Ball Valves. Experience in Motion FCD NFENTB A4 12/14
NAF Duball DL Ball Valves FCD NFENTB467-0-A4 /4 TECHNICAL BULLETIN Experience in Motion Primary Characteristics NAF Duball DL is a full-bore ball valve which is equally suitable for isolation, on/off and
More informationSize : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled
More informationSeries FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves
USA 800-766-0076 Fax 33-890-4456 www.smithcooper.com www.sharpevalves.com Los Angeles, CA Chicago, IL Atlanta, GA Vancouver, WA Houston, TX Design Features Fire Safe API 607 4TH Edition flanged valves
More information10E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design
1E1: ASME lass 15 - Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description 2 Piece ASME 15 Stainless Steel Ball Valve
More informationKeystone Figures 310/312 K-LOK Butterfly Valves
310 - Wafer high performance butterfly valve 312 - Lugged high performance butterfly valve Features General Application High performance applications such as steam, chill water, water, utility lines, gasoline,
More informationProduct Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
More information