Order code information
|
|
|
- Gwenda Phelps
- 5 years ago
- Views:
Transcription
1 3 Piece Threaded High Pressure Fire-Safe all Valves Order code information piece threaded fire-safe ball valves ody Rating Shell Material Valve ore nd onnection Trim Material Firesafe Seat & Seal Material 3 3 PSI (lass 15) 6 6 PSI (lass 25) L S 15N LF2 182-F3 R Reduced bore F Full bore T Threaded SW Socketweld See Note 1 See Note 2 See Note 3 The order code system lets you specify your pressure class, material and reduced or full port. Note 1: ll valves are standard with 3 SS trim and meet N MR & MR-1-3 Note 2: ll valves conform with applicable requirements of the valve fire test per PI 67 5th dition. Note 3: Refer to individual drawings for seat / seal and pressure / temperature ratings. MS 26/11/1 6/6/11 Technical data, dimensions, materials & specifications are subject to change without notice.
2 HM-3RT 3/4" ISO-FT.34LT WOG 3 18F/82 TRIM 3 ST LRIN N OY/P 15N 3 PSI all Valves 119 LI HM-3RT/LRT Reduced Port / Floating all Three Piece Threaded ody LF2 & 15N onstruction NPT Threads to NSI lowout Proof Stem nti-static esign Positive Lock-Out evice Fire-Safe ertified to PI-67 5th dition omplies with N MR-13 N MR-175/ISO P.S.I W.O.G. (lass 15 Limited) 3/4"-3" NM/MTRIL RT LRT 2. Handle Nut / 36.S. Plated 3. Gland Flange / 36.S. Plated 4. elleville Washer / S.S Gland / Stainless Steel 276 Type Stem O-ring / HNR (1 1 /2" - 3") 8. Stem / Stainless Steel 276 Type 3 9. Thrust Washer / elrin 1. ap / 15N 35 GR. LF2 11. ody O-ring / HNR 12. all / Stainless Steel 351 GR. F8M (3) 13. Seat / elrin 14. ody / 15N 35 GR. LF2 15. Spring and Pin / Stainless Steel 276 Type 34. ap Screw / 36.S. Plated../ m I M N S I O N S m size mm/in 3 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in V Weights lb/ kg PRSSUR TMPRTUR RTING 3 /4" - 3" 1 F (38 ) 18 F / 82 KPG (ºF) (º) For 15N low temp limit is -2 F (-29 ) For LF2 low temp limit is -4 F (-4 ) MS 215/5/25 26/11/1
3 MFW 3/4 ISO WOG 1 3 1F/12 TRIM 3 ST LRIN M OY/P 3 3 PSI all Valves 18 LI HM-3FT/LFT Full Port / Floating all Three Piece Threaded ody LF2 & 15N onstruction NPT Threads to NSI lowout Proof Stem nti-static esign Positive Lock-Out evice Fire-Safe ertified to PI-67 5th dition omplies with N MR-13 N MR-175/ISO P.S.I W.O.G. (15 lass) 1/4"-2" 1.3 NM/MTRIL FT LFT 2. Handle Nut / 36.S. Plated 3. Gland Flange / 36.S. Plated 4. elleville Washer / S.S Gland / Stainless Steel 276 Type Stem O-ring / HNR (1 1 /2" 2") 8. Stem / Stainless Steel 276 Type 3 9. Thrust Washer / elrin 1. ap / 15N 35 GR. LF2 11. ody O-ring / HNR 12. all / Stainless Steel 351 GR. F8M (3) 13. Seat / elrin 14. ody / 15N 35 GR. LF2 15. Spring and Pin / Stainless Steel 276 Type 34. ap Screw / 36.S. Plated../ PRSSUR TMPRTUR RTING 1 /4" - 2" 1 F (38 ) 18 F / 82 KPG (ºF) (º) For 15N low temp down to -2 F (-29 ) For LF2 low temp down to -4 F (-4 ) m I M N S I O N S m size mm/in 1 /4 3 /8 1 /2 3 / / mm/in mm/in mm/in mm/in mm/in V Weights kg/lb MS 215/5/25 26/11/1 9/12/1 Technical data, dimensions, materials & specifications are subject to change without notice.
4 HM-3LFW 1/4" ISO-FT.34LT WOG 3 4 F/24 TRIM 3 ST PK N OY/P 35 GR.LF2 3 PSI all Valves 119 LI HM-3FSW/3LFSW Full Port / Floating all onstruction Three Piece Threaded ody LF2 & 15N onstruction Socket Weld nds to NSI.11 lowout Proof Stem nti-static esign Positive Lock-Out evice Fire-Safe ertified to PI-67 5th dition omplies with N MR-13 N MR-175/ISO P.S.I W.O.G. (lass 15 Limited) 1/4"-2" NM/MTRIL FT LFT 2. Handle Nut / 36.S. Plated 3. Gland Flange / 36.S. Plated 4. elleville Washer / S.S Gland / Stainless Steel 276 Type Stem O-ring / FKM-GLT (1 1 /2" & 2") 8. Stem / Stainless Steel 276 Type 3 9. Thrust Washer / Peek 1. ap / 15N 35 GR LF2 11. ody O-ring / FKM 12. all / Stainless Steel 351 GR. F8M (3) 13. Seat / Peek 14. ody / 15N 35 GR LF2 15. Spring and Pin / Stainless Steel 276 Type 34. ap Screw / 36.S. Plated../ m I M N S I O N S m size mm/in 1 /4 3 /8 1 /2 3 / / mm/in mm/in mm/in mm/in mm/in V Weights lb/ kg PRSSUR TMPRTUR RTING 1 /4" - 2" KPG (ºF) (º) For 15N low temp limit is -2 F (-29 ) For LF2 low temp limit is -4 F (-4 ) MS 215/5/27 26/11/1
5 HM-6FT 1/4" ISO-FT.34LT WOG 6 3 F/149 TRIM 3 ST PK N OY/P 15N HIN 6 PSI all Valves 119 LI HM-6FT/LFT Full Port Floating all Three Piece Threaded ody LF2 & 15N onstruction NPT Threads to NSI lowout Proof Stem nti-static esign Positive Lock-Out evice Fire-Safe ertified to PI-67 5th dition omplies with N MR-13 N MR-175/ISO P.S.I W.O.G. (lass 25 Ltd) 1/4"-2" 1.5 NM/MTRIL FT LFT 2. Handle Nut / 36.S. Plated 3. Gland Flange / 36.S. Plated 4. elleville Washer / S.S Gland / Stainless Steel 276 Type Stem O-ring / HNR (1 1 /2" & 2") 8. Stem / Stainless Steel 276 Type 3 9. Thrust Washer / Peek 1. ap / 15N 35 GR LF2 11. ody O-ring / HNR 12. all / Stainless Steel 351 GR. F8M (3) 13. Seat / Peek 14. ody / 15N 35 GR LF2 15. Spring and Pin / Stainless Steel 276 Type 34. ap Screw / 36.S. Plated../ PRSSUR TMPRTUR RTING 1 /4" - 2" 1 F (38 ) KPG m I M N S I O N S m size mm/in 1 /4 3 /8 1 /2 3 / / mm/in mm/in mm/in mm/in mm/in V Weights lb/ kg (ºF) (º) For 15N low temp limit is -2 F (-29 ) For LF2 low temp limit is -4 F (-4 ) MS 215/5/25 26/11/1 9/12/1
6 HM-6RT 3/4" ISO-FT.34LT WOG 6 3 F/149 TRIM 3 ST PK N OY/P 15N HIN 6 PSI all Valves 119 LI HM-6RT/LRT Reduced Port Floating all Three Piece Threaded ody LF2 & 15N onstruction NPT Threads to NSI lowout Proof Stem nti-static esign Positive Lock-Out evice Fire-Safe ertified to PI-67 5th dition omplies with N MR-13 N MR-175/ISO P.S.I W.O.G. (lass 25 Ltd) 3/4"-2" NM/MTRIL RT LRT 2. Handle Nut / 36.S. Plated 3. Gland Flange / 36.S. Plated 4. elleville Washer / S.S Gland / Stainless Steel 276 Type Stem O-ring / HNR (1 1 /2" 2") 8. Stem / Stainless Steel 276 Type 3 9. Thrust Washer / Peek 1. ap / 15N 35 GR LF2 11. ody O-ring / HNR 12. all / Stainless Steel 351 GR F8M 13. Seat / Peek 14. ody / 15N 35 GR LF2 15. Spring and Pin / Stainless Steel 276 Type 34. ap Screw / 36.S. Plated../ m I M N S I O N S m size mm/in 3 / /4 1 1 / mm/in mm/in mm/in mm/in mm/in V Weights kg/lb PRSSUR TMPRTUR RTING 3 /4" - 2" 1 F (38 ) KPG (ºF) (º) For 15N low temp limit is -2 F (-29 ) For LF2 low temp limit is -4 F (-4 ) MS 215/5/27 26/11/1
G Series Investment Cast Stainless Steel Ball Valves
G Series Investment ast Stainless Steel all Valves G1 E Reduced port NPT ends to NSI 1.2.1 One piece body lowout-proof stem (Ring lock with 1 /4" to 3 /8", Latch lock with 1 /2" to 2") omplies with NE
CSSDR-1. C Series Carbon Steel Bar Stock Ball Valves 4.1
Series arbon Steel ar Stock all Valves Lockout hole diameter is 8mm SSR-1 Reduced port NPT ends to NS 1.2.1 One piece body lowout-proof stem 2 p.s.i., W.O.G. omplies with N MR-13 N MR-175/SO 15156 4.1
B1F. B Series Forged Brass Ball Valves 5.1
** Suitable for use with natural gas, manufactured gas and liquefied petroleum gases (distributed as vapour with or without the admixture of air), or mixtures thereof. Not for use on Sour Gas. Series Forged
Product Guide MAS CA 08/05
Product Guide MS 8/5 www.mastewart.com ontents series ball valves -1: full/large port, 2 piece, NPT 1.1-2: full port, 2 piece, solder end 1.1-3: full port, 2 piece, NPT 1.2-4: full port, 2 piece, solder
Contents. G Series stainless steel ball valves. F Series flanged ball valves. C Series carbon steel ball valves. B Series brass/bronze ball valves
Product Guide Contents H Series steel ball valves Product order code information 1.1 HM-3ART/LRT: reduced port, 3 piece, NPT, API 67 1.2 HM-3AFT/LFT: full port, 3 piece, NPT, API 67 1.3 HM-3AFSW/3LFSW:
KTM MODEL NB / MB THREE-WAY BALL VALVES 2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM MODEL N / M THREE-WY LL VLVES 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping FETURES Positive alignment
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Series N / M Three-way ball valves 2-SETS (L-PORT) ND 4-SETS (L ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive
2-SEATS (L-PORT) AND 4-SEATS (L AND T-PORT)
KTM Model N / M Three-way ball valves 2-SETS (-PORT) ND 4-SETS ( ND T-PORT) single KTM 3-way ball valve replaces several 2-way valves, saving valuable space and simplifying piping Features Positive alignment
KTM Three-Way Floating Ball Valves 2-seats (L-port) and 4-seats (L&T-port) General applications Diverting or mixing fluids
KTM Three-Way Floating all Valves -seats (L-port) and 4-seats (L&T-port) KTM single KTM 3-way ball valve replaces several -way saving valuable space and simplifying piping Features Positive alignment of
A single KTM 3-Way ball valve replaces several 2-Way saving valuable space and simplifying piping
single KTM -Way ball valve replaces several -Way saving valuable space and simplifying piping Features Positive alignment of body low out-proof stem Sphericity tolerance of the ball is unsurpassed Reinforced
9800 Series. Metal to Metal Trunnion Ball Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STNRS PI 6 certified SM / NSI 16.10 PI 6F, PI 607, 4th dition Wall thickness complies to 16.34 esigned to SM / NSI 16.5, 16.10, 16.34, 31.1, 31.4 and 41.8 standards N MR 0175 compliance 9800 Series Metal
FLOATING BALL VALVE CATALOG
FLOTING LL VLVE TLOG www.walworthvalves.com INEX INTROUTION WLWORTH ENGINEERING ONTROL... 5 WLWORTH QULITY SYSTEM... 5 QULITY ONTROL EQUIPMENT... 9 FLOTING LL VLVES INTROUTION OF FLOTING LL VLVES...11
Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
General Purpose Ball Valves CERTIFIED TO ISO 9002 QUALITY STANDARDS
General Purpose all Valves RTIFID TO ISO 92 QULITY STNDRDS VOP- ON-PI RDUD PORT GNRL PURPOS LL VLV 4 2 (8 mm) RON OR STINLSS STL ODY, RPTF STS FIGUR NUMR RON = S-L2-SSG F8M = S-L-SSG STNDRD MTRILS PRT
Durco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d
P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves
505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 505F Series 3//5-Way Ball Valve The 505F
Industrial Threaded Ball Valves
Industrial Threaded Ball Valves (Includes socket weld & buttweld ends) Carbon & Stainless Steel KITZ CORPORATION OF AMERICA INDUSTRIAL THREADED BALL VALVES Carbon and Stainless Steel CONTENTS Figure Number
BC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
Ball Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
BY DESIGN. DIFFERENT. BY INTENT.
Tech Bulletin Page 51-10 FLO 3pc High Performance Fire Safe Ball Valve Tri-Pro Series Models HPF50 - (316SS) HPF40 - (WB) Full Port: 1/4-3 Pressure Rating 2250 WOG / 250 WSP Models HPS50 - (316SS) HPS40
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved
Ball Valves in investment cast stainless 2-way
Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out
VELAN COMPANY PROFILE
VL-GPV-27 VLN COMPNY PROFIL Velan is one of the world's leading manufacturers of industrial steel valves, supplying gate, globe, check, ball, butterfly and knife gate valves for critical applications in
Ball Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents
MTRI,, WY VLVS 6P/6P SRIS ,, WY VLVS Way Valves - Side ntry Product index... p. - Way Valves - ottom ntry Product index... p. Way Valves - ottom ntry Product index...p. ontents Introduction... Page - Product
505F Multi-Port Ball Valve
505F Multi-Port Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial Corrosion Resistant Applications The 505F Series Ball Valve The 505F is a true multi-way
2WE30/5WE30: WOG - Stainless Steel Ball Valve 2-Piece NPT Ends Stainless Steel Full Port Direct Mount Actuation Design
2WE30/5WE30: 2000-1500 WOG - Stainless Steel Ball Valve 2-Piece NP Ends Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description Item # Figure Design Parameters Mount
30E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design
3E1: ASME lass 3 - Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description 2 Piece ASME 3 Stainless Steel Ball Valve
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
10E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design
1E1: ASME lass 15 - Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description 2 Piece ASME 15 Stainless Steel Ball Valve
Industrial Threaded Ball Valves (Includes socket weld & buttweld ends) Carbon & Stainless Steel
Industrial Threaded Ball Valves (Includes socket weld & buttweld ends) Carbon & Stainless Steel KITZ CORPORATION OF AMERICA INDUSTRIAL THREADED BALL S Carbon and Stainless Steel CONTENTS Figure Number
MALE X FEMALE LARGE-PORT BALL VALVE T-900 M x F and T-900 M x F-T
MLE X FEMLE LRGE-PORT LL VLVE T-900 M x F and T-900 M x F-T urable forged brass construction Space-saving male-by-female end connections are ideal for confined piping installations T-handle equipped models
3-Piece High Pressure Ball Valves
3-Piece High Pressure Ball Valves Contromatics 3-Piece High Pressure Ball Valves Series 735/ 835 3/4"- 21/2" Reduced Port, 45 WOG* 735-Carbon Steel Body, Stainless Steel Trim 835-All Stainless Steel Construction
3 Piece Full Port Ball Valves, 1 /4-12 Wide Selection of End Connections
Bray High Performance ompany Subsidiary of BRY INTERNTIONL, Inc. 3 Piece Full Port Ball Valves, 1 /4-1 Wide Selection of End onnections Series 7000 & Series 8000 Model 7000-31SS Model 8000-WB Flow-Tek
509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial
50F Multi-Port Flanged Ball Valve Full Port ISO 5 Mounting Pad For Automated & Manual Service General Chemical Industrial and Other Corrosion Resistant Applications The 50F Series //5-Way Flanged Ball
Quick quarter-turn rotation. High cycle stem design. Integrated mounting pad for actuators. Compact assembly. Complete line of accessories.
36 Series Stainless Steel 2-way ull Port all Valve The 36 is a full port, 36 stainless steel, 3 piece ball valve. t is available with threaded ends (36N), socket weld ends (36S), or quick clamp ends with
Ball Valves. ASME Class 150 to mm mm (¼" - 8") ISO 17292/ API 6D
Ball Valves SM Class 150 to 2500 8 mm - 200 mm (¼" - 8") ISO 17292/ PI 6D L&T Valves Limited is a wholly owned subsidiary of Larsen & Toubro. Backed by a fifty-year track-record of excellence and world-leading
115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
YSB SERIES Y - STRAINER
YS SERIES Y - STRINER ronze Y Strainer to 4 100% merican Made Self-ligning Screen Design vailable NPT or Solder onnection Working Pressure (cold non-shock) 125 psi @ 350 F Steam 400 psi @ 150 F WOG RN
Diverter valves. Inspired By Challenge
Inspired y Challenge Floating all Valves General Piece Flanged Ordering code system Introduction are primarily used to split or combine process flows, or to switch medium among different pieces of process
Durco. Microfinish Ball Valve. The Best Standard Stem Seal In The Industry. Bulletin VM-60e (A4)
P R E S E N T I N G T H E N E W urco Microfinish all Valve F O R H E M I A L S E R V I E S The est Standard Stem Seal In The Industry ulletin VM-6e (A4) (VM-6e) Microfinish all Valve 8/2/2 7:35 AM Page
Item 513F. 3/4 Way High Pressure Ball Valve ASME600, 900 & 1500 SIZE: 1/2"-2"
Item 53F 3/ Way High Pressure Ball Valve ASME600, 900 & 0 : /"" ZIPSON'S 53F, 3600 psi, 3/ way high performance flanged ball valve was designed for the high pressure industrial pipe line. With T//X/Iport
SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves
Page 1 of 11 MNGMNT SYSTMS TI-P375-1 Issue 3 SPIR-TROL ISO 91 ½" to 4" SM (NSI) Two-port K, KF and KL ontrol Valves ert. No. LRQ 9638 Description SPIR-TROL is a range of two-port single seat globe valves
3 PC FULL BORE BALL VALVE
Pressure (Bar) 3 PC FULL BORE BALL VALVE 3 PC FULL BORE 1000PSI STAINLESS STEEL THREADED/SOCKET WELD END BALL VALVE Feature: 3 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working
GP 300 Grooved Butterfly Valve
GP 300 Grooved utterfly Valve Nominal Pressure: 20 ar ydraulic Shell Test Pressure 30 ar ydraulic Seat Test Pressure 22 ar 20 ar at: 10º to 100º Suitable Media: Water, Oil, Gas 65 80 100 150 Pipe O/ Item
Trunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
GACHOT TYPE V16 BALL VALVES CARBON STEEL / FULL BORE / DN 8 TO DN 150
CRBON STEEL / FULL BORE / DN 8 TO DN 150 Carbon steel, forged body full bore ball valve designed to international and European standards FETURES PPLICTIONS Saturated steam. mmonia, natural gas, propane
PBV. Threaded and Socketweld Ball Valves P.B.V.
PBV Threaded and Socketweld Ball Valves P.B.V. TABLE OF CONTENTS Overview...3 How to Identify PBV-USA Valves...4 Seat Materials...5 Materials/Parts/Dimensions/Weights Master Star - 5333/6333...6 Superstar
Manifolds WAY MANIFOLDS. Instrument valves & manifolds
Manifolds WY MNIFOLDS Instrument valves & manifolds OVERVIEW STV offers a broad line of 1,2,3,4 and 5-way instrument manifolds, all available in a wide range of materials and fully compatible with the
TABLE OF CONTENTS FORGING AHEAD OF THE REST
ORGED STEEL VLVES YO Valve Co., Ltd ddress: NO. 111, CaoliRoad, engjing Town,Jinshan District,Shanghai, China. TEL: 86-21-67360922 X: 86-21-67360966 Post Code: 201502 E-Mail: info@yaaovalve.com Website:http://www.yaaovalve.com
197C. Valve Group. Series Farris Engineering Pressure Relief Valves
97 Valve Group Series 700 Farris Engineering Pressure Relief Valves Numbering System Selecting and specifying Farris pressure relief valves is simple using the numbering system that follows. Each digit
TY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150
The VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications
The VATORC 50-SN Series 3/4/5-Way Sanitary Ball Valve The 50-SN is a true multi-way Ball valve with balanced seat construction. Porting and shut-off capabilities can reduce the number of process valves
ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
Section 25 Project Surplus Packages - Sales Item
Section 25 Project Surplus Packages - Sales Item 25010112 Project Unused Surplus Package. Valves, Pipe and Various Pipe Fittings in Carbon and Stainless Steel. All Certification available. Stored in Bulgaria
SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends
2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring
2 PC FULL BORE BALL VALVE
Pressure (Bar) 2 PC FULL BORE 1000PSI STAINLESS STEEL THREADED BALL VALVE Feature: 2 PC Body Design Full Bore, Quarter turn operation Size: 1/4 4 (DN8-100) Working Pressure: 1000 PSI / 2000 PSI Threaded
GWC Italia. Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002
GWC Italia Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002 2 GWC ITALIA Proven technology for individual valve solutions worldwide w w
TY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
FLANGED BALL VALVES ASME CLASS 150 & 300
FLNGED BLL VLVES SME CLSS 150 & REDUCED BORE: 1/2 (DN 15 500) SERIES 7000 The Jamesbury polymer-seated flanged ball valves provide industry leading performance and reliability. Offered in a wide variety
SV73 Cast Iron Safety Valve
Page 1 of 5 TI-S13-25 H Issue 11 ert. No. LRQ 0963008 ISO 9001 SV73 ast Iron Safety Valve Description The SV73 cast iron series valves are built in conformance to Section I and VIII of the SME oiler and
DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
International Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API
Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)
3451 Pegasus Drive Bakersfield, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com DHV Valve Company
Trunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM
324 Control 3-Piece 30, 60, or 1/8" Slotted General Chemical Industrial Power INLINE BALLVALVE.COM The 324 Series Control The 324 series control valve incorporates several innovative design features for
Tri-Pro Series. Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/ WOG 1-4
FLO TITEE valves & controls Tri-Pro Series Models / Full HPF50 - (316SS) HPF40 - (WCB) Size: 1/4-4 Pressure Rating: 3000 WOG 1/4-3/4 2250 WOG 1-4 TM Page 1 3pc High Performance Fire Safe Valves Models
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
Single, Two & Three-piece Ball Valves. ASME Class 150, 300 & mm mm (¼"- 8")
Single, Two & Three-piece Ball Valves SM Class 1, 300 & 600 8 mm - 200 mm (¼"- 8") Larsen & Toubro (L&T) is a technology, engineering, construction and manufacturing company. Seven decades of strong, customer-focused
BALL VALVES 4Evergreen Valve
BALL VALVES 4Evergreen Valve 4E represents Excellent quality, Excellent delivery, Excellent service and all at an Excellent price. 4E valve was founded by a group of enthusiastic people with more than
26 Series assuredautomation.com. Stainless Steel 2-way Full Port Ball Valve (Cutaway View) PARTS & FEATURES
6 Series Stainless Steel -way ull Port all Valve The 6 is a full port, 36 stainless steel, NPT threaded end automated ball valve. t can be equipped with a manual handle or with direct mount pneumatic or
GWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE QUALITY VALVE PRODUCTS: BALL CAST STEEL FORGED STEEL BUTTERFLY PLUG WAFER CHECK NEEDLE & GAUGE F L O A T I N G B A L L
BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS
ULLETIN 46.00-2 SEPTEMER 2009 OS OFFSET IS RESILIENT- SETE UTTERFLY VLVES TEHNIL SPEIFITIONS Materials of onstruction 2 s (50-) 8 9 7 Wafer and Lugged esign 10 3 Wafer ody Lugged ody 6 5 4 1 2 2 s (50-)
Swagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
Trunnion Mounted Ball Valves
Trunnion Mounted Ball Valves CONTENTS Product Coding for KITZ Trunnion Mounted Ball Valves 2 Soft seated 2 Metal seated 2 Soft Seated 3-Piece Body Trunnion Mounted Ball Valves T60S Series (1) 3 Component
Fully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
International Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire
Triad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
Stainless Steel Valves
Stainless Steel Valves A-261T Y-Strainer screwed end, PN40, PSI800 Investment casting body Maximum working temperature 230 C The end-to-end length conforms to DIN 3202, Part 4. M8series (PN40) Thread ends
SOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES
CSTS SERIES Quality equates to the sum of Applied Science Serving the most rugged applications in the Western Canadian Sedimentary Basin Brochure CSTS Series February 2016 CSC Valves Canada Inc. operates
GATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
MILLCENTRIC B ALANCING PLUG VALVE
ISO 9001 ertified MILLNTI LNING PLUG VLV alancing Service egulation of multi-circuit chilled water and hot water systems is essential to achieve design performance. MILLNTI valves have excellent throttling
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
Valves and Valve Assemblies
Valves and Valve A-T Controls, Inc. Valves and valve assemblies for liquid and gas shut-off These assemblies are FM approved for use in applications requiring protection for fuel burning equipment per
966SRL 966SBL Nominal size A B C D Weight Red Lever Blue Lever in mm mm mm mm kg Product Code Product Code
D rass Full ore FIG 966SRL and 966SL WRS Valves Lockable lever as standard 966SRL 966SL Nominal size D Weight Red lue in mm mm mm mm kg Product ode Product ode 4 4.4 44.7 90 8 0.7 784204 78408 8 45.4 47.8
THREE-PIECE BALL VALVES H-500 SERIES
THREE-PIECE BALL VALVES H-500 SERIES H-500 FEATURES 3-piece heavy-duty ball valves with: Precision Investment cast body in CF8M stainless steel Precision Investment cast end caps in CF3M stainless steel
Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300. n x Øs Ø P. N h. 4x900=360 0 Ø 5 Ø P BALL VALVES
H Ø T Ø R Ø 5 2 DN-300 (12 ) to DN-400 (16 lass-150 & 300 DN-150 (6 ) to DN-300 Ø X Y Ø P M n x Øs N h 4x900=360 0 Ø 5 Ø P R3 nx x ØS ØS ØS A VAVES ØP ØP ØR ØR ØT R 1 V NDEX 2 VAVES The company 5 GENERA
High Pressure Valves, Fittings and Tubing Pressures to 65,000 psi
igh Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
PRICE LISTS THE RIGHT CHOICE OUR CUSTOMERS COME FIRST 4061 CLOUGH WOODS DR. BATAVIA, OHIO 45103
THE RIGHT CHOICE PRICE LISTS OUR CUSTOMERS COME FIRST 4061 CLOUGH WOODS DR. BATAVIA, OHIO 45103 www.ohiovalve.com (877) 423-2660 TOLL FREE (513) 752-5600 (513) 752-8267 FAX sales@ohiovalve.com 01/01/2018
Hexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction
1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
Gachot Ball Valve Type V16 carbon steel / reduced bore / DN 8 to DN 200
carbon steel / reduced bore / DN 8 to DN 200 Three-piece ball valve featuring a unique design for easy and fast maintenance Features pplications Saturated steam. mmonia, natural gas, propane and utilities.